--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8062.dtsi"
+#include <dt-bindings/input/input.h>
+
+/delete-node/ &nand_pins;
+
+/ {
+ model = "NEC Platforms Aterm WG2600HP3";
+ compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
+
+ memory {
+ device_type = "memory";
+ reg = <0x42000000 0x1e000000>;
+ };
+
+ aliases {
+ label-mac-device = &gmac2;
+
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&buttons_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ mode0 {
+ label = "mode0";
+ gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ mode1 {
+ label = "mode1";
+ gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
+ };
+
+ active_green {
+ label = "green:active";
+ gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
+ };
+
+ active_red {
+ label = "red:active";
+ gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan2g_red {
+ label = "red:wlan2g";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g_red {
+ label = "red:wlan5g";
+ gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ tv_green {
+ label = "green:tv";
+ gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
+ };
+
+ tv_red {
+ label = "red:tv";
+ gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
+ };
+
+ converter_green {
+ label = "green:converter";
+ gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
+ };
+
+ converter_red {
+ label = "red:converter";
+ gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ pinctrl-0 = <&akro_pins>;
+ pinctrl-names = "default";
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ buttons_pins: buttons_pins {
+ mux {
+ pins = "gpio22", "gpio24", "gpio40",
+ "gpio41";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ leds_pins: leds_pins {
+ mux {
+ pins = "gpio14", "gpio15", "gpio35",
+ "gpio36", "gpio38", "gpio42",
+ "gpio43", "gpio46", "gpio55",
+ "gpio56", "gpio57", "gpio58";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ akro2 {
+ pins = "gpio15", "gpio35", "gpio38",
+ "gpio42", "gpio43", "gpio46",
+ "gpio55", "gpio56", "gpio57",
+ "gpio58";
+ drive-strength = <2>;
+ };
+
+ akro4 {
+ pins = "gpio14", "gpio36";
+ drive-strength = <4>;
+ };
+ };
+
+ /*
+ * Stock firmware has the following settings, so let's do the same.
+ * I don't sure why these are required.
+ */
+ akro_pins: akro_pinmux {
+ akro {
+ pins = "gpio17", "gpio26", "gpio47";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ reset {
+ pins = "gpio45";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ gmac0_rgmii {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&gsbi5 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0000000 0x0020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "MIBIB";
+ reg = <0x0020000 0x0020000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "SBL2";
+ reg = <0x0040000 0x0040000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "SBL3";
+ reg = <0x0080000 0x0080000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "DDRCONFIG";
+ reg = <0x0100000 0x0010000>;
+ read-only;
+ };
+
+ partition@110000 {
+ label = "SSD";
+ reg = <0x0110000 0x0010000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "TZ";
+ reg = <0x0120000 0x0080000>;
+ read-only;
+ };
+
+ partition@1a0000 {
+ label = "RPM";
+ reg = <0x01a0000 0x0080000>;
+ read-only;
+ };
+
+ partition@220000 {
+ label = "APPSBL";
+ reg = <0x0220000 0x0080000>;
+ read-only;
+ };
+
+ partition@2a0000 {
+ label = "APPSBLENV";
+ reg = <0x02a0000 0x0010000>;
+ read-only;
+ };
+
+ factory: partition@2b0000 {
+ label = "PRODUCTDATA";
+ reg = <0x02b0000 0x0030000>;
+ read-only;
+ };
+
+ partition@2e0000 {
+ label = "ART";
+ reg = <0x02e0000 0x0040000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@320000 {
+ label = "TP";
+ reg = <0x0320000 0x0040000>;
+ read-only;
+ };
+
+ partition@360000 {
+ label = "TINY";
+ reg = <0x0360000 0x0500000>;
+ read-only;
+ };
+
+ partition@860000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0860000 0x17a0000>;
+ };
+ };
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x00010000 0 0 0 0>;
+
+ qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ force_gen1 = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x00010000 0 0 0 0>;
+
+ ieee80211-freq-limit = <2400000 2483000>;
+ qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x04 0x80080080 /* PAD0_MODE */
+ 0x0c 0x06000000 /* PAD6_MODE */
+ 0x10 0x002613a0 /* PWS_REG */
+ 0x50 0xcc36cc36 /* LED_CTRL0 */
+ 0x54 0xca36ca36 /* LED_CTRL1 */
+ 0x58 0xc936c936 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000004e /* PORT0_STATUS */
+ 0x94 0x0000004e /* PORT6_STATUS */
+ 0xe0 0xc74164de /* SGMII_CTRL */
+ 0xe4 0x0006a545 /* MAC_PWR_SEL */
+ >;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ mdiobus = <&mdio0>;
+ nvmem-cells = <&macaddr_factory_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ mdiobus = <&mdio0>;
+ nvmem-cells = <&macaddr_factory_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_factory_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_c: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_12: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8064.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8062";
+ compatible = "qcom,ipq8062", "qcom,ipq8064";
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&gsbi4 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ serial@16340000 {
+ status = "okay";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+};
+
+&opp_table0 {
+ /delete-node/opp-1200000000;
+ /delete-node/opp-1400000000;
+
+ /*
+ * Voltage thresholds are <target min max>
+ */
+ opp-384000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs1-v0 = < 925000 878750 971250>;
+ opp-microvolt-speed0-pvs2-v0 = < 875000 831250 918750>;
+ opp-microvolt-speed0-pvs3-v0 = < 800000 760000 840000>;
+ };
+
+ opp-600000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
+ opp-microvolt-speed0-pvs2-v0 = < 925000 878750 971250>;
+ opp-microvolt-speed0-pvs3-v0 = < 850000 807500 892500>;
+ };
+
+ opp-800000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs2-v0 = < 995000 945250 1044750>;
+ opp-microvolt-speed0-pvs3-v0 = < 900000 855000 945000>;
+ };
+
+ opp-1000000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs3-v0 = < 950000 902500 997500>;
+ };
+};
+
+&pcie0 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&smb208_s2a {
+ regulator-max-microvolt = <1150000>;
+};
+
+&smb208_s2b {
+ regulator-max-microvolt = <1150000>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ label-mac-device = &gmac2;
+ };
+};
+
+&qcom_pinmux {
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ usb0_pwr_en_pin: usb0_pwr_en_pin {
+ mux {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pin: usb1_pwr_en_pin {
+ mux {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "SBL2";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "SBL3";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "DDRCONFIG";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "SSD";
+ reg = <0xa0000 0x10000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "TZ";
+ reg = <0xb0000 0x30000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "RPM";
+ reg = <0xe0000 0x20000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "fs-uboot";
+ reg = <0x100000 0x70000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "uboot-env";
+ reg = <0x170000 0x40000>;
+ read-only;
+ };
+
+ partition@1b0000 {
+ label = "radio";
+ reg = <0x1b0000 0x40000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_radio_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_radio_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@1f0000 {
+ label = "os-image";
+ reg = <0x1f0000 0x400000>;
+ };
+
+ partition@5f0000 {
+ label = "rootfs";
+ reg = <0x5f0000 0x1900000>;
+ };
+
+ defaultmac: partition@1ef0000 {
+ label = "default-mac";
+ reg = <0x1ef0000 0x00200>;
+ read-only;
+ };
+
+ partition@1ef0200 {
+ label = "pin";
+ reg = <0x1ef0200 0x00200>;
+ read-only;
+ };
+
+ partition@1ef0400 {
+ label = "product-info";
+ reg = <0x1ef0400 0x0fc00>;
+ read-only;
+ };
+
+ partition@1f00000 {
+ label = "partition-table";
+ reg = <0x1f00000 0x10000>;
+ read-only;
+ };
+
+ partition@1f10000 {
+ label = "soft-version";
+ reg = <0x1f10000 0x10000>;
+ read-only;
+ };
+
+ partition@1f20000 {
+ label = "support-list";
+ reg = <0x1f20000 0x10000>;
+ read-only;
+ };
+
+ partition@1f30000 {
+ label = "profile";
+ reg = <0x1f30000 0x10000>;
+ read-only;
+ };
+
+ partition@1f40000 {
+ label = "default-config";
+ reg = <0x1f40000 0x10000>;
+ read-only;
+ };
+
+ partition@1f50000 {
+ label = "user-config";
+ reg = <0x1f50000 0x40000>;
+ read-only;
+ };
+
+ partition@1f90000 {
+ label = "qos-db";
+ reg = <0x1f90000 0x40000>;
+ read-only;
+ };
+
+ partition@1fd0000 {
+ label = "usb-config";
+ reg = <0x1fd0000 0x10000>;
+ read-only;
+ };
+
+ partition@1fe0000 {
+ label = "log";
+ reg = <0x1fe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pin>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pin>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(-1)>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_defaultmac_8>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_defaultmac_8>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&defaultmac {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_defaultmac_8: macaddr@8 {
+ reg = <0x8 0x6>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-ad7200-c2600.dtsi"
+
+/ {
+ model = "TP-Link Talon AD7200";
+ compatible = "tplink,ad7200", "qcom,ipq8064";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ led_enable {
+ label = "led-enable";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ lan {
+ label = "blue:lan";
+ gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb1 {
+ label = "blue:usb1";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3 {
+ label = "blue:usb3";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_orange {
+ label = "orange:wan";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan60g {
+ label = "blue:wlan60g";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status: status {
+ label = "blue:status";
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio53", "gpio54", "gpio67";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
+ "gpio33", "gpio55", "gpio56", "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&pcie2 {
+ status = "okay";
+ max-link-speed = <1>;
+};
--- /dev/null
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+ compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&flash {
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8064/AP161";
+ compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+};
+
+&qcom_pinmux {
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62",
+ "gpio2", "gpio66";
+ };
+ };
+};
+
+&flash {
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x20080 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ qca,phy-rgmii-en;
+ qca,txclk-delay-en;
+ qca,rxclk-delay-en;
+ };
+
+ phy3: ethernet-phy@3 {
+ device_type = "ethernet-phy";
+ reg = <3>;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+#include "qcom-ipq8064-ad7200-c2600.dtsi"
+
+/ {
+ model = "TP-Link Archer C2600";
+ compatible = "tplink,c2600", "qcom,ipq8064";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &general;
+ led-running = &power;
+ led-upgrade = &general;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ ledswitch {
+ label = "ledswitch";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ lan {
+ label = "white:lan";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb4 {
+ label = "white:usb_4";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb_2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_white {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ general: general {
+ label = "white:general";
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio16", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
+ "gpio53", "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4 D7800";
+ compatible = "netgear,d7800", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ rsvd@5fe00000 {
+ reg = <0x5fe00000 0x200000>;
+ reusable;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_white: power_white {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(1)>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(2)>;
+ };
+ };
+};
+
+&pcie2 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie2_pins>;
+ pinctrl-names = "default";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ artbak: art@1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ kernel@1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0400000>;
+ };
+
+ ubi@1880000 {
+ label = "ubi";
+ reg = <0x1880000 0x6080000>;
+ };
+
+ reserve@7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8064/DB149";
+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
+
+ aliases {
+ serial0 = &gsbi2_serial;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&qcom_pinmux {
+ rgmii0_pins: rgmii0_pins {
+ mux {
+ pins = "gpio2", "gpio66";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&gsbi2 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ gsbi2_serial: serial@12490000 {
+ status = "okay";
+ };
+};
+
+&gsbi4 {
+ status = "disabled";
+};
+
+&gsbi4_serial {
+ status = "disabled";
+};
+
+&flash {
+ m25p,fast-read;
+
+ partition@0 {
+ label = "lowlevel_init";
+ reg = <0x0 0x1b0000>;
+ };
+
+ partition@1 {
+ label = "u-boot";
+ reg = <0x1b0000 0x80000>;
+ };
+
+ partition@2 {
+ label = "u-boot-env";
+ reg = <0x230000 0x40000>;
+ };
+
+ partition@3 {
+ label = "caldata";
+ reg = <0x270000 0x40000>;
+ };
+
+ partition@4 {
+ label = "firmware";
+ reg = <0x2b0000 0x1d50000>;
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy6: ethernet-phy@6 {
+ reg = <6>;
+ };
+
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+ phy-handle = <&phy4>;
+
+ pinctrl-0 = <&rgmii0_pins>;
+ pinctrl-names = "default";
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ phy-handle = <&phy6>;
+};
+
+&gmac3 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-eax500.dtsi"
+
+/ {
+ model = "Linksys EA7500 V1 WiFi Router";
+ compatible = "linksys,ea7500-v1", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0xe000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ /* look for root deviceblock nbr in this bootarg */
+ find-rootblock = "ubi.mtd=";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio65", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&partitions {
+ partition@5f80000 {
+ label = "sysdiag";
+ reg = <0x5f80000 0x100000>;
+ };
+
+ partition@6080000 {
+ label = "syscfg";
+ reg = <0x6080000 0x1f80000>;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-eax500.dtsi"
+
+/ {
+ model = "Linksys EA8500 WiFi Router";
+ compatible = "linksys,ea8500", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ wps {
+ label = "green:wps";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "green:wifi";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio65", "gpio67", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6", "gpio53", "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&partitions {
+ partition@5f80000 {
+ label = "syscfg";
+ reg = <0x5f80000 0x2080000>;
+ };
+};
+
+&mdio0 {
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+};
+
+/* LAN */
+&gmac2 {
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyMSM0,115200n8";
+ /* append to bootargs adding the root deviceblock nbr from bootloader */
+ append-rootblock = "ubi.mtd=";
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ max-link-speed = <1>;
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x0c80000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+
+ partition@540000 {
+ label = "DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+
+ partition@660000 {
+ label = "SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+
+ partition@780000 {
+ label = "TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+
+ partition@a00000 {
+ label = "RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+
+ art: partition@c80000 {
+ label = "art";
+ reg = <0x0c80000 0x0140000>;
+ read-only;
+ };
+
+ partition@dc0000 {
+ label = "APPSBL";
+ reg = <0x0dc0000 0x0100000>;
+ read-only;
+ };
+
+ partition@ec0000 {
+ label = "u_env";
+ reg = <0x0ec0000 0x0040000>;
+ };
+
+ partition@f00000 {
+ label = "s_env";
+ reg = <0x0f00000 0x0040000>;
+ };
+
+ partition@f40000 {
+ label = "devinfo";
+ reg = <0x0f40000 0x0040000>;
+ };
+
+ partition@f80000 {
+ label = "kernel1";
+ reg = <0x0f80000 0x2800000>; /* 4 MB, spill to rootfs */
+ };
+
+ partition@1380000 {
+ label = "rootfs1";
+ reg = <0x1380000 0x2400000>;
+ };
+
+ partition@3780000 {
+ label = "kernel2";
+ reg = <0x3780000 0x2800000>;
+ };
+
+ partition@3b80000 {
+ label = "rootfs2";
+ reg = <0x3b80000 0x2400000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x00010 0x2613a0 /* PWS_REG */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ compatible = "asrock,g10", "qcom,ipq8064";
+ model = "ASRock G10";
+
+ aliases {
+ ethernet0 = &gmac1;
+ ethernet1 = &gmac0;
+
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_amber;
+ };
+
+ chosen {
+ bootargs-override = "console=ttyMSM0,115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ /*
+ * this is a bit misleading. Because there are about seven
+ * multicolor LEDs connected all wired together in parallel.
+ */
+
+ status_yellow {
+ label = "yellow:status";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ /*
+ * LED is declared in vendors boardfile but it's not
+ * working and the manual doesn't mention anything
+ * about the LED being white.
+
+ status_white {
+ label = "white:status";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+ */
+ };
+
+ i2c-gpio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "i2c-gpio";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
+ <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
+ i2c-gpio,delay-us = <5>;
+ i2c-gpio,scl-output-only;
+
+ mcu@50 {
+ reg = <0x50>;
+ compatible = "sonix,sn8f25e21";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ ir-remote {
+ label = "ir-remote";
+ gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps5g {
+ label = "wps5g";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps2g {
+ label = "wps2g";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi4_serial {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1200000>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi5g: wifi@1,0 {
+ reg = <0x00010000 0 0 0 0>;
+ compatible = "qcom,ath10k";
+ qcom,ath10k-calibration-variant = "ASRock-G10";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2g: wifi@1,0 {
+ reg = <0x00010000 0 0 0 0>;
+ compatible = "qcom,ath10k";
+ qcom,ath10k-calibration-variant = "ASRock-G10";
+ };
+ };
+};
+
+&qcom_pinmux {
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio26";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio15", "gpio16", "gpio64", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ uart0_pins: uart0_pins {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "gsbi4";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+};
+
+&rpm {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&tcsr {
+ qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+};
+
+/delete-node/ &pcie2_pins;
+/delete-node/ &pcie2;
--- /dev/null
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Netgear Nighthawk X4 R7500";
+ compatible = "netgear,r7500", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0xe000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_white: power_white {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&gsbi5 {
+ status = "disabled";
+
+ spi@1a280000 {
+ status = "disabled";
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: art@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ };
+
+ kernel@1340000 {
+ label = "kernel";
+ reg = <0x1340000 0x0400000>;
+ };
+
+ ubi@1740000 {
+ label = "ubi";
+ reg = <0x1740000 0x1600000>;
+ };
+
+ netgear@2d40000 {
+ label = "netgear";
+ reg = <0x2d40000 0x0c00000>;
+ read-only;
+ };
+
+ reserve@3940000 {
+ label = "reserve";
+ reg = <0x3940000 0x46c0000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&tcsr {
+ qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+ compatible = "qcom,tcsr";
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&art {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4 R7500v2";
+ compatible = "netgear,r7500v2", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ rsvd@5fe00000 {
+ reg = <0x5fe00000 0x200000>;
+ reusable;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "amber:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3 {
+ label = "amber:usb3";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ status {
+ label = "amber:status";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet {
+ label = "white:internet";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(1)>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(2)>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ artbak: art@1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ kernel@1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0400000>;
+ };
+
+ ubi@1880000 {
+ label = "ubi";
+ reg = <0x1880000 0x6080000>;
+ };
+
+ reserve@7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Ubiquiti UniFi AC HD";
+ compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064";
+
+ aliases {
+ label-mac-device = &gmac2;
+ led-boot = &led_dome_white;
+ led-failsafe = &led_dome_white;
+ led-running = &led_dome_blue;
+ led-upgrade = &led_dome_blue;
+ mdio-gpio0 = &mdio0;
+ ethernet0 = &gmac2;
+ ethernet1 = &gmac1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_dome_blue: dome_blue {
+ label = "blue:dome";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_dome_white: dome_white {
+ label = "white:dome";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio9", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&CPU_SPC {
+ status = "disabled";
+};
+
+&gsbi5 {
+ status = "okay";
+
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash@0 {
+ compatible = "mx25u25635f", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "SBL2";
+ reg = <0x30000 0x20000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "SBL3";
+ reg = <0x50000 0x30000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "DDRCONFIG";
+ reg = <0x80000 0x10000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "SSD";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "TZ";
+ reg = <0xa0000 0x30000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "RPM";
+ reg = <0xd0000 0x20000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "APPSBL";
+ reg = <0xf0000 0xc0000>;
+ read-only;
+ };
+
+ partition@1b0000 {
+ label = "APPSBLENV";
+ reg = <0x1b0000 0x10000>;
+ read-only;
+ };
+
+ eeprom: partition@1c0000 {
+ label = "EEPROM";
+ reg = <0x1c0000 0x10000>;
+ read-only;
+ };
+
+ partition@1d0000 {
+ label = "bootselect";
+ reg = <0x1d0000 0x10000>;
+ };
+
+ partition@1e0000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x1e0000 0xe70000>;
+ };
+
+ partition@1050000 {
+ label = "kernel1";
+ reg = <0x1050000 0xe70000>;
+ read-only;
+ };
+
+ partition@1ec0000 {
+ label = "debug";
+ reg = <0x1ec0000 0x100000>;
+ read-only;
+ };
+
+ partition@1fc0000 {
+ label = "cfg";
+ reg = <0x1fc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ mdiobus = <&mdio0>;
+ phy-handle = <&phy5>;
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ nvmem-cells = <&macaddr_eeprom_6>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+ status = "okay";
+
+ mdiobus = <&mdio0>;
+ phy-handle = <&phy4>;
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_eeprom_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&tcsr {
+ status = "okay";
+};
+
+&hs_phy_0 {
+ status = "okay";
+};
+
+&ss_phy_0 {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&hs_phy_1 {
+ status = "okay";
+};
+
+&ss_phy_1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&eeprom {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_eeprom_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_eeprom_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064.dtsi"
+
+/ {
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&gsbi4 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ serial@16340000 {
+ status = "okay";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+};
+
+&CPU_SPC {
+ status = "okay";
+};
+
+&pcie0 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+ ports-implemented = <0x1>;
+};
+
+&ss_phy_0 {
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TP-Link Archer VR2600v";
+ compatible = "tplink,vr2600v", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power;
+ led-failsafe = &general;
+ led-running = &power;
+ led-upgrade = &general;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ dect {
+ label = "dect";
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ ledswitch {
+ label = "ledswitch";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ dsl {
+ label = "white:dsl";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "white:usb";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "white:lan";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "white:wlan2g";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "white:wlan5g";
+ gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ phone {
+ label = "white:phone";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ general: general {
+ label = "white:general";
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
+ "gpio26", "gpio53", "gpio56", "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi4: spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "SBL2";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "SBL3";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "DDRCONFIG";
+ reg = <0x100000 0x10000>;
+ read-only;
+ };
+
+ partition@110000 {
+ label = "SSD";
+ reg = <0x110000 0x10000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "TZ";
+ reg = <0x120000 0x80000>;
+ read-only;
+ };
+
+ partition@1a0000 {
+ label = "RPM";
+ reg = <0x1a0000 0x80000>;
+ read-only;
+ };
+
+ partition@220000 {
+ label = "APPSBL";
+ reg = <0x220000 0x80000>;
+ read-only;
+ };
+
+ partition@2a0000 {
+ label = "APPSBLENV";
+ reg = <0x2a0000 0x40000>;
+ read-only;
+ };
+
+ partition@2e0000 {
+ label = "OLDART";
+ reg = <0x2e0000 0x40000>;
+ read-only;
+ };
+
+ partition@320000 {
+ label = "firmware";
+ reg = <0x320000 0xc60000>;
+ compatible = "openwrt,uimage";
+ openwrt,offset = <512>; /* account for pad-extra 512 */
+ };
+
+ /* hole 0xf80000 - 0xfaf100 */
+
+ partition@faf100 {
+ label = "default-mac";
+ reg = <0xfaf100 0x00200>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_defaultmac_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+ };
+
+ partition@fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(-1)>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_defaultmac_0>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_defaultmac_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "NEC Aterm WG2600HP";
+ compatible = "nec,wg2600hp", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ bridge {
+ label = "bridge";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ converter {
+ label = "converter";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ converter_green {
+ label = "green:converter";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_red: power_red {
+ label = "red:power";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ active_green {
+ label = "green:active";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ active_red {
+ label = "red:active";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_green: power_green {
+ label = "green:power";
+ gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ converter_red {
+ label = "red:converter";
+ gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_red {
+ label = "red:wlan2g";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_red {
+ label = "red:wlan5g";
+ gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ tv_green {
+ label = "green:tv";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+
+ tv_red {
+ label = "red:tv";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&CPU_SPC {
+ status = "disabled";
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x06000000 /* PAD0_MODE */
+ 0x0000c 0x00080080 /* PAD6_MODE */
+ 0x000e4 0x0006a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x0000004e /* PORT0_STATUS */
+ 0x00094 0x0000004e /* PORT6_STATUS */
+ >;
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi5 {
+ status = "okay";
+
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ MIBIB@20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ SBL2@40000 {
+ label = "SBL2";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ SBL3@80000 {
+ label = "SBL3";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ DDRCONFIG@100000 {
+ label = "DDRCONFIG";
+ reg = <0x100000 0x10000>;
+ read-only;
+ };
+
+ SSD@110000 {
+ label = "SSD";
+ reg = <0x110000 0x10000>;
+ read-only;
+ };
+
+ TZ@120000 {
+ label = "TZ";
+ reg = <0x120000 0x80000>;
+ read-only;
+ };
+
+ RPM@1a0000 {
+ label = "RPM";
+ reg = <0x1a0000 0x80000>;
+ read-only;
+ };
+
+ APPSBL@220000 {
+ label = "APPSBL";
+ reg = <0x220000 0x80000>;
+ read-only;
+ };
+
+ APPSBLENV@2a0000 {
+ label = "APPSBLENV";
+ reg = <0x2a0000 0x10000>;
+ };
+
+ PRODUCTDATA: PRODUCTDATA@2b0000 {
+ label = "PRODUCTDATA";
+ reg = <0x2b0000 0x30000>;
+ read-only;
+ };
+
+ ART@2e0000 {
+ label = "ART";
+ reg = <0x2e0000 0x40000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ TP@320000 {
+ label = "TP";
+ reg = <0x320000 0x40000>;
+ read-only;
+ };
+
+ TINY@360000 {
+ label = "TINY";
+ reg = <0x360000 0x500000>;
+ read-only;
+ };
+
+ firmware@860000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x860000 0x17a0000>;
+ };
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio16", "gpio54", "gpio24", "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
+ "gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
+ "gpio64", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ usb_pwr_en_pins: usb_pwr_en_pins {
+ mux {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+};
+
+&PRODUCTDATA {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_PRODUCTDATA_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_c: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_12: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
+ * Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
+ * All rights reserved.
+ */
+
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ compatible = "compex,wpq864", "qcom,ipq8064";
+ model = "Compex WPQ864";
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ ethernet0 = &gmac1;
+ ethernet1 = &gmac0;
+
+ led-boot = &led_pass;
+ led-failsafe = &led_fail;
+ led-running = &led_pass;
+ led-upgrade = &led_pass;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ rss4 {
+ label = "green:rss4";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ rss3 {
+ label = "green:rss3";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ rss2 {
+ label = "orange:rss2";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ rss1 {
+ label = "red:rss1";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_pass: pass {
+ label = "green:pass";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_fail: fail {
+ label = "green:fail";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb-pcie {
+ label = "green:usb-pcie";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+
+ pinctrl-0 = <&beeper_pins>;
+ pinctrl-names = "default";
+
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&rpm {
+ pinctrl-0 = <&rpm_pins>;
+ pinctrl-names = "default";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ mt29f2g08abbeah4@0 {
+ compatible = "qcom,nandcs";
+
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ MIBIB@40000 {
+ label = "MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+
+ SBL2@180000 {
+ label = "SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+
+ SBL3@2c0000 {
+ label = "SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+
+ DDRCONFIG@540000 {
+ label = "DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+
+ SSD@660000 {
+ label = "SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+
+ TZ@780000 {
+ label = "TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+
+ RPM@a00000 {
+ label = "RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ };
+
+ ART@1200000 {
+ label = "ART";
+ reg = <0x1200000 0x0140000>;
+ };
+
+ ubi@1340000 {
+ label = "ubi";
+ reg = <0x1340000 0x4000000>;
+ };
+
+ BOOTCONFIG@5340000 {
+ label = "BOOTCONFIG";
+ reg = <0x5340000 0x0060000>;
+ };
+
+ SBL2-1@53a0000- {
+ label = "SBL2_1";
+ reg = <0x53a0000 0x0140000>;
+ read-only;
+ };
+
+ SBL3-1@54e0000 {
+ label = "SBL3_1";
+ reg = <0x54e0000 0x0280000>;
+ read-only;
+ };
+
+ DDRCONFIG-1@5760000 {
+ label = "DDRCONFIG_1";
+ reg = <0x5760000 0x0120000>;
+ read-only;
+ };
+
+ SSD-1@5880000 {
+ label = "SSD_1";
+ reg = <0x5880000 0x0120000>;
+ read-only;
+ };
+
+ TZ-1@59a0000 {
+ label = "TZ_1";
+ reg = <0x59a0000 0x0280000>;
+ read-only;
+ };
+
+ RPM-1@5c20000 {
+ label = "RPM_1";
+ reg = <0x5c20000 0x0280000>;
+ read-only;
+ };
+
+ BOOTCONFIG1@5ea0000 {
+ label = "BOOTCONFIG1";
+ reg = <0x5ea0000 0x0060000>;
+ };
+
+ APPSBL-1@5f00000 {
+ label = "APPSBL_1";
+ reg = <0x5f00000 0x0500000>;
+ read-only;
+ };
+
+ ubi-1@6400000 {
+ label = "ubi_1";
+ reg = <0x6400000 0x4000000>;
+ };
+
+ unused@a400000 {
+ label = "unused";
+ reg = <0xa400000 0x5c00000>;
+ };
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi4_serial {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&flash {
+ compatible = "jedec,spi-nor";
+};
+
+&sata_phy {
+ status = "disabled";
+};
+
+&sata {
+ status = "disabled";
+};
+
+&ss_phy_0 { /* USB3 port 0 SS phy */
+ status = "okay";
+
+ rx_eq = <2>;
+ tx_deamp_3_5db = <32>;
+ mpll = <160>;
+};
+
+&ss_phy_1 { /* USB3 port 1 SS phy */
+ status = "okay";
+
+ rx_eq = <2>;
+ tx_deamp_3_5db = <32>;
+ mpll = <160>;
+};
+
+&pcie0 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+};
+
+&qcom_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinctrl0 {
+ pcie0_pcie2_perst {
+ pins = "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22",
+ "gpio23", "gpio24", "gpio25", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ beeper_pins: beeper_pins {
+ mux {
+ pins = "gpio55";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ rpm_pins: rpm_pins {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+
+ uart0_pins: uart0_pins {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "gsbi4";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+
+ clk {
+ pins = "gpio21";
+ function = "gsbi5";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&tcsr {
+ qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Buffalo WXR-2533DHP";
+ compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
+
+ memory@42000000 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &diag;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ /* use "ubi_rootfs" volume in "ubi" partition as rootfs */
+ bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb {
+ label = "green:usb";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port0 &hub_port1>;
+ };
+
+ guestport {
+ label = "green:guestport";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ diag: diag {
+ label = "orange:diag";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet_orange {
+ label = "orange:internet";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet_white {
+ label = "white:internet";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wireless_orange {
+ label = "orange:wireless";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wireless_white {
+ label = "white:wireless";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_orange {
+ label = "orange:router";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_white {
+ label = "white:router";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ power {
+ label = "power";
+ gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ eject {
+ label = "eject";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_EJECTCD>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ guest {
+ label = "guest";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ router {
+ label = "router";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ cs@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ubi@0 {
+ label = "ubi";
+ reg = <0x0000000 0x4000000>;
+ };
+
+ rootfs_1@4000000 {
+ label = "rootfs_1";
+ reg = <0x4000000 0x4000000>;
+ };
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x07600000 /* PAD0_MODE */
+ 0x00008 0x01000000 /* PAD5_MODE */
+ 0x0000c 0x00000080 /* PAD6_MODE */
+ 0x00050 0xcc35cc35 /* LED_CTRL0 */
+ 0x00054 0xca35ca35 /* LED_CTRL1 */
+ 0x00058 0xc935c935 /* LED_CTRL2 */
+ 0x0005c 0x03ffff00 /* LED_CTRL3 */
+ 0x000e4 0x0006a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x0000007e /* PORT0_STATUS */
+ 0x00094 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_ART_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_ART_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi4_serial {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&gsbi5 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ MIBIB@10000 {
+ label = "MIBIB";
+ reg = <0x10000 0x20000>;
+ read-only;
+ };
+
+ SBL2@30000 {
+ label = "SBL2";
+ reg = <0x30000 0x30000>;
+ read-only;
+ };
+
+ SBL3@60000 {
+ label = "SBL3";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ DDRCONFIG@90000 {
+ label = "DDRCONFIG";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ SSD@a0000 {
+ label = "SSD";
+ reg = <0xa0000 0x10000>;
+ read-only;
+ };
+
+ TZ@b0000 {
+ label = "TZ";
+ reg = <0xb0000 0x30000>;
+ read-only;
+ };
+
+ RPM@e0000 {
+ label = "RPM";
+ reg = <0xe0000 0x20000>;
+ read-only;
+ };
+
+ APPSBL@100000 {
+ label = "APPSBL";
+ reg = <0x100000 0x70000>;
+ read-only;
+ };
+
+ APPSBLENV@170000 {
+ label = "APPSBLENV";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+
+ ART@180000 {
+ label = "ART";
+ reg = <0x180000 0x40000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_ART_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_ART_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ macaddr_ART_18: macaddr@18 {
+ reg = <0x18 0x6>;
+ };
+
+ macaddr_ART_1e: macaddr@1e {
+ reg = <0x1e 0x6>;
+ };
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ BOOTCONFIG@1c0000 {
+ label = "BOOTCONFIG";
+ reg = <0x1c0000 0x10000>;
+ read-only;
+ };
+
+ APPSBL_1@1d0000 {
+ label = "APPSBL_1";
+ reg = <0x1d0000 0x70000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&dwc3_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&dwc3_1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_ART_1e>, <&precal_ART_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_ART_18>, <&precal_ART_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
+ "gpio58", "gpio64", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
+ "gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ uart0_pins: uart0_pins {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs{
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ usb_pwr_en_pins: usb_pwr_en_pins {
+ mux{
+ pins = "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+};
--- /dev/null
+#include "qcom-ipq8065.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ZyXEL NBG6817";
+ compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ sdcc1 = &sdcc1;
+
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1";
+ append-rootblock = "root=/dev/mmcblk0p";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ internet {
+ label = "white:internet";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi2g {
+ label = "amber:wifi2g";
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* wifi2g amber from the manual is missing */
+
+ wifi5g {
+ label = "amber:wifi5g";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* wifi5g amber from the manual is missing */
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio53", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio9", "gpio26", "gpio33", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+ drive-strength = <12>;
+ };
+
+ pwr {
+ pins = "gpio17";
+ bias-pull-down;
+ output-high;
+ };
+
+ ovc {
+ pins = "gpio16";
+ bias-pull-up;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio14", "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ };
+
+ pwr {
+ pins = "gpio14";
+ bias-pull-down;
+ output-high;
+ };
+
+ ovc {
+ pins = "gpio15";
+ bias-pull-up;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi4: spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <51200000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ qca,ar8327-initvals = <
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x0000c 0x80 /* PAD6_MODE */
+ >;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <1>;
+ qcom,phy_mii_type = <0>;
+ qcom,emulation = <0>;
+ qcom,irq = <255>;
+ mdiobus = <&mdio0>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,phy_mii_type = <1>;
+ qcom,emulation = <0>;
+ qcom,irq = <258>;
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&amba {
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+#include "qcom-ipq8065.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ rsvd@5fe00000 {
+ reg = <0x5fe00000 0x200000>;
+ reusable;
+ };
+
+ ramoops@42100000 {
+ compatible = "ramoops";
+ reg = <0x42100000 0x40000>;
+ record-size = <0x4000>;
+ console-size = <0x4000>;
+ ftrace-size = <0x4000>;
+ pmsg-size = <0x4000>;
+ };
+ };
+
+ aliases {
+ label-mac-device = &gmac2;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+
+ mdio-gpio0 = &mdio0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ power_white: power_white {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9",
+ "gpio22", "gpio23", "gpio24",
+ "gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ tx {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32";
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ spi6_pins: spi6_pins {
+ mux {
+ pins = "gpio55", "gpio56", "gpio58";
+ function = "gsbi6";
+ bias-pull-down;
+ };
+
+ mosi {
+ pins = "gpio55";
+ drive-strength = <12>;
+ };
+
+ miso {
+ pins = "gpio56";
+ drive-strength = <14>;
+ };
+
+ cs {
+ pins = "gpio57";
+ drive-strength = <12>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio58";
+ drive-strength = <12>;
+ };
+
+ reset {
+ pins = "gpio33";
+ drive-strength = <10>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ partition@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ partition@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: partition@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ partition@1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0400000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
+ >;
+ qca,ar8327-vlans = <
+ 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
+ 0x2 0x21 /* VLAN2 Ports 0/5 */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ qca,ar8327-initvals = <
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x0000c 0x80 /* PAD6_MODE */
+ >;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <1>;
+ qcom,phy_mii_type = <0>;
+ qcom,emulation = <0>;
+ qcom,irq = <255>;
+ mdiobus = <&mdio0>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,phy_mii_type = <1>;
+ qcom,emulation = <0>;
+ qcom,irq = <258>;
+ mdiobus = <&mdio0>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
--- /dev/null
+#include "qcom-ipq8065-nighthawk.dtsi"
+
+/ {
+ model = "Netgear Nighthawk X4S R7800";
+ compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
+};
+
+&leds {
+ usb1 {
+ label = "white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&partitions {
+ partition@1880000 {
+ label = "ubi";
+ reg = <0x1880000 0x6080000>;
+ };
+
+ partition@7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(1)>;
+};
+
+&wifi1 {
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(2)>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq8065.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Askey RT4230W REV6";
+ compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x3e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &ledctrl3;
+ led-failsafe = &ledctrl1;
+ led-running = &ledctrl2;
+ led-upgrade = &ledctrl3;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ ledctrl1: ledctrl1 {
+ label = "ledctrl1";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ ledctrl2: ledctrl2 {
+ label = "ledctrl2";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ ledctrl3: ledctrl3 {
+ label = "ledctrl3";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio54", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio22", "gpio23", "gpio24";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "everspin,mr25h256";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "0:SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "0:SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+
+ partition@540000 {
+ label = "0:DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+
+ partition@660000 {
+ label = "0:SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+
+ partition@780000 {
+ label = "0:TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+
+ partition@a00000 {
+ label = "0:RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+
+ partition@c80000 {
+ label = "0:APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ partition@1180000 {
+ label = "0:APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ };
+
+ partition@1200000 {
+ label = "0:ART";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_ART_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_ART_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@1340000 {
+ label = "0:BOOTCONFIG";
+ reg = <0x1340000 0x0060000>;
+ read-only;
+ };
+
+ partition@13a0000 {
+ label = "0:SBL2_1";
+ reg = <0x13a0000 0x0140000>;
+ read-only;
+ };
+
+ partition@14e0000 {
+ label = "0:SBL3_1";
+ reg = <0x14e0000 0x0280000>;
+ read-only;
+ };
+
+ partition@1760000 {
+ label = "0:DDRCONFIG_1";
+ reg = <0x1760000 0x0120000>;
+ read-only;
+ };
+
+ partition@1880000 {
+ label = "0:SSD_1";
+ reg = <0x1880000 0x0120000>;
+ read-only;
+ };
+
+ partition@19a0000 {
+ label = "0:TZ_1";
+ reg = <0x19a0000 0x0280000>;
+ read-only;
+ };
+
+ partition@1c20000 {
+ label = "0:RPM_1";
+ reg = <0x1c20000 0x0280000>;
+ read-only;
+ };
+
+ partition@1ea0000 {
+ label = "0:BOOTCONFIG1";
+ reg = <0x1ea0000 0x0060000>;
+ read-only;
+ };
+
+ partition@1f00000 {
+ label = "0:APPSBL_1";
+ reg = <0x1f00000 0x0500000>;
+ read-only;
+ };
+
+ partition@2400000 {
+ label = "ubi";
+ reg = <0x2400000 0x1a000000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ 0x00050 0xcf02cf02 /* LED_CTRL_0 */
+ 0x00054 0xc832c832 /* LED_CTRL_1 */
+ >;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+
+ nvmem-cells = <&macaddr_ART_0>;
+ nvmem-cell-names = "mac-address";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ nvmem-cells = <&macaddr_ART_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_1000>;
+ nvmem-cell-names = "pre-calibration";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_5000>;
+ nvmem-cell-names = "pre-calibration";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq8065.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Arris TR4400 v2";
+ compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "everspin,mr25h256";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "0:SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+ partition@2c0000 {
+ label = "0:SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+ partition@540000 {
+ label = "0:DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+ partition@660000 {
+ label = "0:SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+ partition@780000 {
+ label = "0:TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+ partition@a00000 {
+ label = "0:RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+ partition@c80000 {
+ label = "0:APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+ partition@1180000 {
+ label = "0:APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ };
+ partition@1200000 {
+ label = "0:ART";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+ stock_partition@1340000 {
+ label = "stock_rootfs";
+ reg = <0x1340000 0x4000000>;
+ };
+ partition@5340000 {
+ label = "0:BOOTCONFIG";
+ reg = <0x5340000 0x0060000>;
+ read-only;
+ };
+ partition@53a0000 {
+ label = "0:SBL2_1";
+ reg = <0x53a0000 0x0140000>;
+ read-only;
+ };
+ partition@54e0000 {
+ label = "0:SBL3_1";
+ reg = <0x54e0000 0x0280000>;
+ read-only;
+ };
+ partition@5760000 {
+ label = "0:DDRCONFIG_1";
+ reg = <0x5760000 0x0120000>;
+ read-only;
+ };
+ partition@5880000 {
+ label = "0:SSD_1";
+ reg = <0x5880000 0x0120000>;
+ read-only;
+ };
+ partition@59a0000 {
+ label = "0:TZ_1";
+ reg = <0x59a0000 0x0280000>;
+ read-only;
+ };
+ partition@5c20000 {
+ label = "0:RPM_1";
+ reg = <0x5c20000 0x0280000>;
+ read-only;
+ };
+ partition@5ea0000 {
+ label = "0:BOOTCONFIG1";
+ reg = <0x5ea0000 0x0060000>;
+ read-only;
+ };
+ partition@5f00000 {
+ label = "0:APPSBL_1";
+ reg = <0x5f00000 0x0500000>;
+ read-only;
+ };
+ stock_partition@6400000 {
+ label = "stock_rootfs_1";
+ reg = <0x6400000 0x4000000>;
+ };
+ stock_partition@a400000 {
+ label = "stock_fw_env";
+ reg = <0xa400000 0x0100000>;
+ };
+ stock_partition@a500000 {
+ label = "stock_config";
+ reg = <0xa500000 0x0800000>;
+ };
+ stock_partition@ad00000 {
+ label = "stock_PKI";
+ reg = <0xad00000 0x0200000>;
+ };
+ stock_partition@af00000 {
+ label = "stock_scfgmgr";
+ reg = <0xaf00000 0x0100000>;
+ };
+
+ partition@6400000 {
+ label = "fw_env";
+ reg = <0x6400000 0x0100000>;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_fw_env_0: macaddr@0 {
+ reg = <0x00 0x6>;
+ };
+ macaddr_fw_env_6: macaddr@6 {
+ reg = <0x06 0x6>;
+ };
+ macaddr_fw_env_c: macaddr@c {
+ reg = <0x0c 0x6>;
+ };
+ macaddr_fw_env_12: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
+ macaddr_fw_env_18: macaddr@18 {
+ reg = <0x18 0x6>;
+ };
+ };
+ partition@6500000 {
+ label = "ubi";
+ reg = <0x6500000 0x9b00000>;
+ };
+ partition@1340000 {
+ label = "extra";
+ reg = <0x1340000 0x4000000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+
+ nvmem-cells = <&macaddr_fw_env_18>;
+ nvmem-cell-names = "mac-address";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ nvmem-cells = <&macaddr_fw_env_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac3 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+
+ nvmem-cells = <&macaddr_fw_env_6>;
+ nvmem-cell-names = "mac-address";
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>;
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>;
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8065-nighthawk.dtsi"
+
+/ {
+ model = "Netgear Nighthawk XR500";
+ compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064";
+
+};
+
+&leds {
+ usb1 {
+ label = "white:usb1";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&partitions {
+ partition@1880000 {
+ label = "ubi";
+ reg = <0x1880000 0xce00000>;
+ };
+
+ partition@e680000 {
+ label = "reserve";
+ reg = <0xe680000 0x0780000>;
+ read-only;
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+};
+
+&wifi1 {
+ nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+};
+
+&art {
+ macaddr_art_c: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8065";
+ compatible = "qcom,ipq8065", "qcom,ipq8064";
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&gsbi4 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ serial@16340000 {
+ status = "okay";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+};
+
+&pcie0 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+ ports-implemented = <0x1>;
+};
+
+&smb208_s2a {
+ regulator-min-microvolt = <775000>;
+ regulator-max-microvolt = <1275000>;
+};
+
+&smb208_s2b {
+ regulator-min-microvolt = <775000>;
+ regulator-max-microvolt = <1275000>;
+};
+
+&ss_phy_0 {
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
+};
+
+&opp_table_l2 {
+ /delete-node/opp-1200000000;
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+};
+
+&opp_table0 {
+ /*
+ * On ipq8065 1.2 ghz freq is not present
+ * Remove it to make cpufreq work and not
+ * complain for missing definition
+ */
+
+ /delete-node/opp-1200000000;
+
+ /*
+ * Voltage thresholds are <target min max>
+ */
+ opp-384000000 {
+ opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
+ opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
+ opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
+ };
+
+ opp-600000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
+ opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
+ };
+
+ opp-800000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
+ };
+
+ opp-1000000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
+ };
+
+ opp-1400000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
+ opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
+ opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
+ opp-level = <1>;
+ };
+
+ opp-1725000000 {
+ opp-hz = /bits/ 64 <1725000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
+ opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
+ opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
+ opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
+ opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+ memory {
+ device_type = "memory";
+ linux,usable-memory = <0x41500000 0x1ea00000>;
+ reg = <0x40000000 0x20000000>;
+ };
+
+ cpus {
+ idle-states {
+ CPU_SPC: spc {
+ status = "disabled";
+ };
+ };
+ };
+
+ chosen {
+ bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
+ };
+};
+
+&qcom_pinmux {
+ mdio0_pins_active: mdio0_pins_active {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
+ };
+
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
+ };
+
+ phy_active: phy_active {
+ phy {
+ pins = "gpio6", "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ uart1_pins: uart1_pins {
+ mux {
+ pins = "gpio51", "gpio52";
+ function = "gsbi1";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+};
+
+&gsbi1 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
+
+ serial@12450000 {
+ status = "okay";
+
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x0 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x10000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x0 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x10000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie2 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x0 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x10000 0 0 0 0>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ compatible = "qcom,nandcs";
+
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x2140000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "sbl1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "mibib";
+ reg = <0x40000 0x140000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "sbl2";
+ reg = <0x180000 0x140000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "sbl3";
+ reg = <0x2c0000 0x280000>;
+ read-only;
+ };
+
+ partition@540000 {
+ label = "ddrconfig";
+ reg = <0x540000 0x120000>;
+ read-only;
+ };
+
+ partition@660000 {
+ label = "ssd";
+ reg = <0x660000 0x120000>;
+ read-only;
+ };
+
+ partition@780000 {
+ label = "tz";
+ reg = <0x780000 0x280000>;
+ read-only;
+ };
+
+ partition@a00000 {
+ label = "rpm";
+ reg = <0xa00000 0x280000>;
+ read-only;
+ };
+
+ partition@1fc0000 {
+ label = "u-boot";
+ reg = <0x1fc0000 0x180000>;
+ read-only;
+ };
+
+ partition@21c0000 {
+ label = "bootkernel1";
+ reg = <0x21c0000 0xa80000>;
+ };
+
+ partition@2c40000 {
+ label = "bootkernel2";
+ reg = <0x2c40000 0xa80000>;
+ };
+
+ partition@36c0000 {
+ label = "ubi";
+ reg = <0x36c0000 0x46c0000>;
+ };
+
+ partition@7d80000 {
+ label = "art";
+ reg = <0x7d80000 0x200000>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Edgecore ECW5410";
+ compatible = "edgecore,ecw5410", "qcom,ipq8064";
+
+ reserved-memory {
+ nss@40000000 {
+ reg = <0x40000000 0x1000000>;
+ no-map;
+ };
+
+ smem: smem@41000000 {
+ reg = <0x41000000 0x200000>;
+ no-map;
+ };
+
+ wifi_dump@44000000 {
+ reg = <0x44000000 0x600000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ idle-states {
+ CPU_SPC: spc {
+ status = "disabled";
+ };
+ };
+ };
+
+ aliases {
+ serial1 = &gsbi1_serial;
+ ethernet0 = &gmac2;
+ ethernet1 = &gmac3;
+
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g_yellow {
+ label = "yellow:wlan2g";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g_yellow {
+ label = "yellow:wlan5g";
+ gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+
+&qcom_pinmux {
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+
+ clk {
+ pins = "gpio21";
+ function = "gsbi5";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio16", "gpio23", "gpio24", "gpio26",
+ "gpio28", "gpio59";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ uart1_pins: uart1_pins {
+ mux {
+ pins = "gpio51", "gpio52", "gpio53", "gpio54";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-none;
+ };
+ };
+};
+
+&gsbi1 {
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
+ status = "okay";
+
+ serial@12450000 {
+ status = "okay";
+
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi4: spi@1a280000 {
+ status = "okay";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+ };
+};
+
+&hs_phy_0 { /* USB3 port 0 HS phy */
+ status = "okay";
+};
+
+&hs_phy_1 { /* USB3 port 1 HS phy */
+ status = "okay";
+};
+
+&ss_phy_0 { /* USB3 port 0 SS phy */
+ status = "okay";
+};
+
+&ss_phy_1 { /* USB3 port 1 SS phy */
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
+ };
+ };
+};
+
+&pcie2 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ compatible = "qcom,nandcs";
+
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ rootfs1@0 {
+ label = "rootfs1";
+ reg = <0x0000000 0x4000000>;
+ };
+
+ rootfs2@4000000 {
+ label = "rootfs2";
+ reg = <0x4000000 0x4000000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ qcom,id = <2>;
+ mdiobus = <&mdio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy1>;
+};
+
+&gmac3 {
+ status = "okay";
+
+ qcom,id = <3>;
+ mdiobus = <&mdio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8068-cryptid-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Meraki MR42";
+ compatible = "meraki,mr42", "qcom,ipq8064";
+
+ aliases {
+ serial1 = &gsbi1_serial;
+ ethernet0 = &gmac3;
+
+ led-boot = &led_active;
+ led-failsafe = &led_power;
+ led-running = &led_active;
+ led-upgrade = &led_active;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power: power {
+ label = "orange:power";
+ gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_active: active {
+ label = "white:active";
+ gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gmac3 {
+ status = "okay";
+
+ qcom,id = <3>;
+ mdiobus = <&mdio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy2>;
+
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gsbi2 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+};
+
+&gsbi2_i2c {
+ status = "okay";
+
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ ina2xx@40 {
+ compatible = "ina219";
+ shunt-resistor = <40000>;
+ reg = <0x40>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ reg = <0x56>;
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
+ };
+};
+
+&gsbi6 {
+ qcom,mode = <GSBI_PROT_I2C>;
+ status = "okay";
+};
+
+&gsbi6_i2c {
+ status = "okay";
+
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ tlc591xx@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59108";
+ reg = <0x40>;
+
+ red@0 {
+ label = "red:user";
+ reg = <0x0>;
+ };
+
+ green@1 {
+ label = "green:user";
+ reg = <0x1>;
+ };
+
+ blue@2 {
+ label = "blue:user";
+ reg = <0x2>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
+ pinctrl-names = "default";
+
+ phy2: ethernet-phy2 {
+ reg = <2>;
+
+ reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <24000>;
+
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+&qcom_pinmux {
+ i2c0_pins: i2c0_pins {
+ mux {
+ pins = "gpio24", "gpio25";
+ function = "gsbi2";
+ drive-strength = <2>;
+ bias-pull-up;
+ input;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio26";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c1_pins: i2c1_pins {
+ mux {
+ pins = "gpio29", "gpio30";
+ function = "gsbi6";
+ drive-strength = <2>;
+ bias-pull-up;
+ input;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio31", "gpio32";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&wifi1 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <2>;
+};
+
+&wifi2 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <3>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8068-cryptid-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Meraki MR52";
+ compatible = "meraki,mr52", "qcom,ipq8064";
+
+ aliases {
+ serial1 = &gsbi1_serial;
+ mdio-gpio0 = &mdio_gpio0;
+ ethernet0 = &gmac2;
+ ethernet1 = &gmac3;
+
+ led-boot = &led_active;
+ led-failsafe = &led_power;
+ led-running = &led_active;
+ led-upgrade = &led_active;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power: power {
+ label = "orange:power";
+ gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2_green {
+ label = "green:lan2";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1_green {
+ label = "green:lan1";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_active: active {
+ label = "white:active";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_orange {
+ label = "orange:lan2";
+ gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1_orange {
+ label = "orange:lan1";
+ gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ qcom,id = <2>;
+ mdiobus = <&mdio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac3 {
+ status = "okay";
+
+ qcom,id = <3>;
+ mdiobus = <&mdio_gpio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy4>;
+
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&gsbi7 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+};
+
+&gsbi7_i2c {
+ status = "okay";
+
+ pinctrl-0 = <&i2c_pins>;
+ pinctrl-names = "default";
+
+ ina2xx@45 {
+ compatible = "ina219";
+ shunt-resistor = <80000>;
+ reg = <0x45>;
+ };
+
+ tlc591xx@49 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59108";
+ reg = <0x49>;
+
+ red@0 {
+ label = "red:user";
+ reg = <0x0>;
+ };
+
+ green@1 {
+ label = "green:user";
+ reg = <0x1>;
+ };
+
+ blue@2 {
+ label = "blue:user";
+ reg = <0x2>;
+ };
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ reg = <0x52>;
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ i2c_pins: i2c_pins {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "gsbi7";
+ drive-strength = <2>;
+ bias-pull-up;
+ input;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio19", "gpio26";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ input;
+ };
+ };
+};
+
+&soc {
+ mdio_gpio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
+ pinctrl-names = "default";
+
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH
+ &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+
+ phy0: ethernet-phy0 {
+ reg = <0>;
+ reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <24000>;
+ };
+
+ phy4: ethernet-phy4 {
+ reg = <4>;
+ reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <24000>;
+ };
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <4>;
+};
+
+&wifi1 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <3>;
+};
+
+&wifi2 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <2>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8062.dtsi"
+#include <dt-bindings/input/input.h>
+
+/delete-node/ &nand_pins;
+
+/ {
+ model = "NEC Platforms Aterm WG2600HP3";
+ compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
+
+ memory {
+ device_type = "memory";
+ reg = <0x42000000 0x1e000000>;
+ };
+
+ aliases {
+ label-mac-device = &gmac2;
+
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&buttons_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ mode0 {
+ label = "mode0";
+ gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ mode1 {
+ label = "mode1";
+ gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
+ };
+
+ active_green {
+ label = "green:active";
+ gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
+ };
+
+ active_red {
+ label = "red:active";
+ gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan2g_red {
+ label = "red:wlan2g";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g_red {
+ label = "red:wlan5g";
+ gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ tv_green {
+ label = "green:tv";
+ gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
+ };
+
+ tv_red {
+ label = "red:tv";
+ gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
+ };
+
+ converter_green {
+ label = "green:converter";
+ gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
+ };
+
+ converter_red {
+ label = "red:converter";
+ gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ pinctrl-0 = <&akro_pins>;
+ pinctrl-names = "default";
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ buttons_pins: buttons_pins {
+ mux {
+ pins = "gpio22", "gpio24", "gpio40",
+ "gpio41";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ leds_pins: leds_pins {
+ mux {
+ pins = "gpio14", "gpio15", "gpio35",
+ "gpio36", "gpio38", "gpio42",
+ "gpio43", "gpio46", "gpio55",
+ "gpio56", "gpio57", "gpio58";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ akro2 {
+ pins = "gpio15", "gpio35", "gpio38",
+ "gpio42", "gpio43", "gpio46",
+ "gpio55", "gpio56", "gpio57",
+ "gpio58";
+ drive-strength = <2>;
+ };
+
+ akro4 {
+ pins = "gpio14", "gpio36";
+ drive-strength = <4>;
+ };
+ };
+
+ /*
+ * Stock firmware has the following settings, so let's do the same.
+ * I don't sure why these are required.
+ */
+ akro_pins: akro_pinmux {
+ akro {
+ pins = "gpio17", "gpio26", "gpio47";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ reset {
+ pins = "gpio45";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ gmac0_rgmii {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&gsbi5 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0000000 0x0020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "MIBIB";
+ reg = <0x0020000 0x0020000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "SBL2";
+ reg = <0x0040000 0x0040000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "SBL3";
+ reg = <0x0080000 0x0080000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "DDRCONFIG";
+ reg = <0x0100000 0x0010000>;
+ read-only;
+ };
+
+ partition@110000 {
+ label = "SSD";
+ reg = <0x0110000 0x0010000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "TZ";
+ reg = <0x0120000 0x0080000>;
+ read-only;
+ };
+
+ partition@1a0000 {
+ label = "RPM";
+ reg = <0x01a0000 0x0080000>;
+ read-only;
+ };
+
+ partition@220000 {
+ label = "APPSBL";
+ reg = <0x0220000 0x0080000>;
+ read-only;
+ };
+
+ partition@2a0000 {
+ label = "APPSBLENV";
+ reg = <0x02a0000 0x0010000>;
+ read-only;
+ };
+
+ factory: partition@2b0000 {
+ label = "PRODUCTDATA";
+ reg = <0x02b0000 0x0030000>;
+ read-only;
+ };
+
+ partition@2e0000 {
+ label = "ART";
+ reg = <0x02e0000 0x0040000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@320000 {
+ label = "TP";
+ reg = <0x0320000 0x0040000>;
+ read-only;
+ };
+
+ partition@360000 {
+ label = "TINY";
+ reg = <0x0360000 0x0500000>;
+ read-only;
+ };
+
+ partition@860000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0860000 0x17a0000>;
+ };
+ };
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x00010000 0 0 0 0>;
+
+ qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ force_gen1 = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x00010000 0 0 0 0>;
+
+ ieee80211-freq-limit = <2400000 2483000>;
+ qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x04 0x80080080 /* PAD0_MODE */
+ 0x0c 0x06000000 /* PAD6_MODE */
+ 0x10 0x002613a0 /* PWS_REG */
+ 0x50 0xcc36cc36 /* LED_CTRL0 */
+ 0x54 0xca36ca36 /* LED_CTRL1 */
+ 0x58 0xc936c936 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000004e /* PORT0_STATUS */
+ 0x94 0x0000004e /* PORT6_STATUS */
+ 0xe0 0xc74164de /* SGMII_CTRL */
+ 0xe4 0x0006a545 /* MAC_PWR_SEL */
+ >;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ mdiobus = <&mdio0>;
+ nvmem-cells = <&macaddr_factory_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ mdiobus = <&mdio0>;
+ nvmem-cells = <&macaddr_factory_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_factory_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_c: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_12: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "qcom-ipq8064.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8062";
+ compatible = "qcom,ipq8062", "qcom,ipq8064";
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&gsbi4 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ serial@16340000 {
+ status = "okay";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+};
+
+&opp_table0 {
+ /delete-node/opp-1200000000;
+ /delete-node/opp-1400000000;
+
+ /*
+ * Voltage thresholds are <target min max>
+ */
+ opp-384000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs1-v0 = < 925000 878750 971250>;
+ opp-microvolt-speed0-pvs2-v0 = < 875000 831250 918750>;
+ opp-microvolt-speed0-pvs3-v0 = < 800000 760000 840000>;
+ };
+
+ opp-600000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
+ opp-microvolt-speed0-pvs2-v0 = < 925000 878750 971250>;
+ opp-microvolt-speed0-pvs3-v0 = < 850000 807500 892500>;
+ };
+
+ opp-800000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs2-v0 = < 995000 945250 1044750>;
+ opp-microvolt-speed0-pvs3-v0 = < 900000 855000 945000>;
+ };
+
+ opp-1000000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs3-v0 = < 950000 902500 997500>;
+ };
+};
+
+&pcie0 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&smb208_s2a {
+ regulator-max-microvolt = <1150000>;
+};
+
+&smb208_s2b {
+ regulator-max-microvolt = <1150000>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ label-mac-device = &gmac2;
+ };
+};
+
+&qcom_pinmux {
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ usb0_pwr_en_pin: usb0_pwr_en_pin {
+ mux {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pin: usb1_pwr_en_pin {
+ mux {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "SBL2";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "SBL3";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "DDRCONFIG";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "SSD";
+ reg = <0xa0000 0x10000>;
+ read-only;
+ };
+
+ partition@b0000 {
+ label = "TZ";
+ reg = <0xb0000 0x30000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "RPM";
+ reg = <0xe0000 0x20000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "fs-uboot";
+ reg = <0x100000 0x70000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "uboot-env";
+ reg = <0x170000 0x40000>;
+ read-only;
+ };
+
+ partition@1b0000 {
+ label = "radio";
+ reg = <0x1b0000 0x40000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_radio_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_radio_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@1f0000 {
+ label = "os-image";
+ reg = <0x1f0000 0x400000>;
+ };
+
+ partition@5f0000 {
+ label = "rootfs";
+ reg = <0x5f0000 0x1900000>;
+ };
+
+ defaultmac: partition@1ef0000 {
+ label = "default-mac";
+ reg = <0x1ef0000 0x00200>;
+ read-only;
+ };
+
+ partition@1ef0200 {
+ label = "pin";
+ reg = <0x1ef0200 0x00200>;
+ read-only;
+ };
+
+ partition@1ef0400 {
+ label = "product-info";
+ reg = <0x1ef0400 0x0fc00>;
+ read-only;
+ };
+
+ partition@1f00000 {
+ label = "partition-table";
+ reg = <0x1f00000 0x10000>;
+ read-only;
+ };
+
+ partition@1f10000 {
+ label = "soft-version";
+ reg = <0x1f10000 0x10000>;
+ read-only;
+ };
+
+ partition@1f20000 {
+ label = "support-list";
+ reg = <0x1f20000 0x10000>;
+ read-only;
+ };
+
+ partition@1f30000 {
+ label = "profile";
+ reg = <0x1f30000 0x10000>;
+ read-only;
+ };
+
+ partition@1f40000 {
+ label = "default-config";
+ reg = <0x1f40000 0x10000>;
+ read-only;
+ };
+
+ partition@1f50000 {
+ label = "user-config";
+ reg = <0x1f50000 0x40000>;
+ read-only;
+ };
+
+ partition@1f90000 {
+ label = "qos-db";
+ reg = <0x1f90000 0x40000>;
+ read-only;
+ };
+
+ partition@1fd0000 {
+ label = "usb-config";
+ reg = <0x1fd0000 0x10000>;
+ read-only;
+ };
+
+ partition@1fe0000 {
+ label = "log";
+ reg = <0x1fe0000 0x20000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pin>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pin>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(-1)>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_defaultmac_8>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_defaultmac_8>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&defaultmac {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_defaultmac_8: macaddr@8 {
+ reg = <0x8 0x6>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-ad7200-c2600.dtsi"
+
+/ {
+ model = "TP-Link Talon AD7200";
+ compatible = "tplink,ad7200", "qcom,ipq8064";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ led_enable {
+ label = "led-enable";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ lan {
+ label = "blue:lan";
+ gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb1 {
+ label = "blue:usb1";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "blue:wlan5g";
+ gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3 {
+ label = "blue:usb3";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "blue:wlan2g";
+ gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_orange {
+ label = "orange:wan";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "blue:wps";
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan60g {
+ label = "blue:wlan60g";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status: status {
+ label = "blue:status";
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio53", "gpio54", "gpio67";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
+ "gpio33", "gpio55", "gpio56", "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&pcie2 {
+ status = "okay";
+ max-link-speed = <1>;
+};
--- /dev/null
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+ compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&flash {
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8064/AP161";
+ compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+};
+
+&qcom_pinmux {
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62",
+ "gpio2", "gpio66";
+ };
+ };
+};
+
+&flash {
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x20080 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ qca,phy-rgmii-en;
+ qca,txclk-delay-en;
+ qca,rxclk-delay-en;
+ };
+
+ phy3: ethernet-phy@3 {
+ device_type = "ethernet-phy";
+ reg = <3>;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+#include "qcom-ipq8064-ad7200-c2600.dtsi"
+
+/ {
+ model = "TP-Link Archer C2600";
+ compatible = "tplink,c2600", "qcom,ipq8064";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &general;
+ led-running = &power;
+ led-upgrade = &general;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ ledswitch {
+ label = "ledswitch";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ lan {
+ label = "white:lan";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb4 {
+ label = "white:usb_4";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb_2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_white {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ general: general {
+ label = "white:general";
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio16", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
+ "gpio53", "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4 D7800";
+ compatible = "netgear,d7800", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ rsvd@5fe00000 {
+ reg = <0x5fe00000 0x200000>;
+ reusable;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_white: power_white {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(1)>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(2)>;
+ };
+ };
+};
+
+&pcie2 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie2_pins>;
+ pinctrl-names = "default";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ artbak: art@1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ kernel@1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0400000>;
+ };
+
+ ubi@1880000 {
+ label = "ubi";
+ reg = <0x1880000 0x6080000>;
+ };
+
+ reserve@7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8064/DB149";
+ compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
+
+ aliases {
+ serial0 = &gsbi2_serial;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&qcom_pinmux {
+ rgmii0_pins: rgmii0_pins {
+ mux {
+ pins = "gpio2", "gpio66";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+};
+
+&gsbi2 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ gsbi2_serial: serial@12490000 {
+ status = "okay";
+ };
+};
+
+&gsbi4 {
+ status = "disabled";
+};
+
+&gsbi4_serial {
+ status = "disabled";
+};
+
+&flash {
+ m25p,fast-read;
+
+ partition@0 {
+ label = "lowlevel_init";
+ reg = <0x0 0x1b0000>;
+ };
+
+ partition@1 {
+ label = "u-boot";
+ reg = <0x1b0000 0x80000>;
+ };
+
+ partition@2 {
+ label = "u-boot-env";
+ reg = <0x230000 0x40000>;
+ };
+
+ partition@3 {
+ label = "caldata";
+ reg = <0x270000 0x40000>;
+ };
+
+ partition@4 {
+ label = "firmware";
+ reg = <0x2b0000 0x1d50000>;
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy6: ethernet-phy@6 {
+ reg = <6>;
+ };
+
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+ phy-handle = <&phy4>;
+
+ pinctrl-0 = <&rgmii0_pins>;
+ pinctrl-names = "default";
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ phy-handle = <&phy6>;
+};
+
+&gmac3 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-eax500.dtsi"
+
+/ {
+ model = "Linksys EA7500 V1 WiFi Router";
+ compatible = "linksys,ea7500-v1", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0xe000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ /* look for root deviceblock nbr in this bootarg */
+ find-rootblock = "ubi.mtd=";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio65", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&partitions {
+ partition@5f80000 {
+ label = "sysdiag";
+ reg = <0x5f80000 0x100000>;
+ };
+
+ partition@6080000 {
+ label = "syscfg";
+ reg = <0x6080000 0x1f80000>;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-eax500.dtsi"
+
+/ {
+ model = "Linksys EA8500 WiFi Router";
+ compatible = "linksys,ea8500", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ wps {
+ label = "green:wps";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "green:wifi";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio65", "gpio67", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6", "gpio53", "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&partitions {
+ partition@5f80000 {
+ label = "syscfg";
+ reg = <0x5f80000 0x2080000>;
+ };
+};
+
+&mdio0 {
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+};
+
+/* LAN */
+&gmac2 {
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,emulation = <0>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ bootargs = "console=ttyMSM0,115200n8";
+ /* append to bootargs adding the root deviceblock nbr from bootloader */
+ append-rootblock = "ubi.mtd=";
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ max-link-speed = <1>;
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x0c80000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+
+ partition@540000 {
+ label = "DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+
+ partition@660000 {
+ label = "SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+
+ partition@780000 {
+ label = "TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+
+ partition@a00000 {
+ label = "RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+
+ art: partition@c80000 {
+ label = "art";
+ reg = <0x0c80000 0x0140000>;
+ read-only;
+ };
+
+ partition@dc0000 {
+ label = "APPSBL";
+ reg = <0x0dc0000 0x0100000>;
+ read-only;
+ };
+
+ partition@ec0000 {
+ label = "u_env";
+ reg = <0x0ec0000 0x0040000>;
+ };
+
+ partition@f00000 {
+ label = "s_env";
+ reg = <0x0f00000 0x0040000>;
+ };
+
+ partition@f40000 {
+ label = "devinfo";
+ reg = <0x0f40000 0x0040000>;
+ };
+
+ partition@f80000 {
+ label = "kernel1";
+ reg = <0x0f80000 0x2800000>; /* 4 MB, spill to rootfs */
+ };
+
+ partition@1380000 {
+ label = "rootfs1";
+ reg = <0x1380000 0x2400000>;
+ };
+
+ partition@3780000 {
+ label = "kernel2";
+ reg = <0x3780000 0x2800000>;
+ };
+
+ partition@3b80000 {
+ label = "rootfs2";
+ reg = <0x3b80000 0x2400000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x00010 0x2613a0 /* PWS_REG */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ compatible = "asrock,g10", "qcom,ipq8064";
+ model = "ASRock G10";
+
+ aliases {
+ ethernet0 = &gmac1;
+ ethernet1 = &gmac0;
+
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_amber;
+ };
+
+ chosen {
+ bootargs-override = "console=ttyMSM0,115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ /*
+ * this is a bit misleading. Because there are about seven
+ * multicolor LEDs connected all wired together in parallel.
+ */
+
+ status_yellow {
+ label = "yellow:status";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ /*
+ * LED is declared in vendors boardfile but it's not
+ * working and the manual doesn't mention anything
+ * about the LED being white.
+
+ status_white {
+ label = "white:status";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+ */
+ };
+
+ i2c-gpio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "i2c-gpio";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
+ <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
+ i2c-gpio,delay-us = <5>;
+ i2c-gpio,scl-output-only;
+
+ mcu@50 {
+ reg = <0x50>;
+ compatible = "sonix,sn8f25e21";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ ir-remote {
+ label = "ir-remote";
+ gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps5g {
+ label = "wps5g";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps2g {
+ label = "wps2g";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&gmac1 {
+ status = "okay";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi4_serial {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1200000>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi5g: wifi@1,0 {
+ reg = <0x00010000 0 0 0 0>;
+ compatible = "qcom,ath10k";
+ qcom,ath10k-calibration-variant = "ASRock-G10";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2g: wifi@1,0 {
+ reg = <0x00010000 0 0 0 0>;
+ compatible = "qcom,ath10k";
+ qcom,ath10k-calibration-variant = "ASRock-G10";
+ };
+ };
+};
+
+&qcom_pinmux {
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio26";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio15", "gpio16", "gpio64", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ uart0_pins: uart0_pins {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "gsbi4";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+};
+
+&rpm {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&tcsr {
+ qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+};
+
+/delete-node/ &pcie2_pins;
+/delete-node/ &pcie2;
--- /dev/null
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Netgear Nighthawk X4 R7500";
+ compatible = "netgear,r7500", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0xe000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_white: power_white {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&gsbi5 {
+ status = "disabled";
+
+ spi@1a280000 {
+ status = "disabled";
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: art@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ };
+
+ kernel@1340000 {
+ label = "kernel";
+ reg = <0x1340000 0x0400000>;
+ };
+
+ ubi@1740000 {
+ label = "ubi";
+ reg = <0x1740000 0x1600000>;
+ };
+
+ netgear@2d40000 {
+ label = "netgear";
+ reg = <0x2d40000 0x0c00000>;
+ read-only;
+ };
+
+ reserve@3940000 {
+ label = "reserve";
+ reg = <0x3940000 0x46c0000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&tcsr {
+ qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+ compatible = "qcom,tcsr";
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&art {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear Nighthawk X4 R7500v2";
+ compatible = "netgear,r7500v2", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ rsvd@5fe00000 {
+ reg = <0x5fe00000 0x200000>;
+ reusable;
+ };
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb1 {
+ label = "amber:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3 {
+ label = "amber:usb3";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ status {
+ label = "amber:status";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet {
+ label = "white:internet";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
+ "gpio24","gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(1)>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(2)>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcadata@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ artbak: art@1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ kernel@1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0400000>;
+ };
+
+ ubi@1880000 {
+ label = "ubi";
+ reg = <0x1880000 0x6080000>;
+ };
+
+ reserve@7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Ubiquiti UniFi AC HD";
+ compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064";
+
+ aliases {
+ label-mac-device = &gmac2;
+ led-boot = &led_dome_white;
+ led-failsafe = &led_dome_white;
+ led-running = &led_dome_blue;
+ led-upgrade = &led_dome_blue;
+ mdio-gpio0 = &mdio0;
+ ethernet0 = &gmac2;
+ ethernet1 = &gmac1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_dome_blue: dome_blue {
+ label = "blue:dome";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_dome_white: dome_white {
+ label = "white:dome";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio9", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&CPU_SPC {
+ status = "disabled";
+};
+
+&gsbi5 {
+ status = "okay";
+
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash@0 {
+ compatible = "mx25u25635f", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "SBL2";
+ reg = <0x30000 0x20000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "SBL3";
+ reg = <0x50000 0x30000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "DDRCONFIG";
+ reg = <0x80000 0x10000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "SSD";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "TZ";
+ reg = <0xa0000 0x30000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "RPM";
+ reg = <0xd0000 0x20000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "APPSBL";
+ reg = <0xf0000 0xc0000>;
+ read-only;
+ };
+
+ partition@1b0000 {
+ label = "APPSBLENV";
+ reg = <0x1b0000 0x10000>;
+ read-only;
+ };
+
+ eeprom: partition@1c0000 {
+ label = "EEPROM";
+ reg = <0x1c0000 0x10000>;
+ read-only;
+ };
+
+ partition@1d0000 {
+ label = "bootselect";
+ reg = <0x1d0000 0x10000>;
+ };
+
+ partition@1e0000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x1e0000 0xe70000>;
+ };
+
+ partition@1050000 {
+ label = "kernel1";
+ reg = <0x1050000 0xe70000>;
+ read-only;
+ };
+
+ partition@1ec0000 {
+ label = "debug";
+ reg = <0x1ec0000 0x100000>;
+ read-only;
+ };
+
+ partition@1fc0000 {
+ label = "cfg";
+ reg = <0x1fc0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ mdiobus = <&mdio0>;
+ phy-handle = <&phy5>;
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ nvmem-cells = <&macaddr_eeprom_6>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+ status = "okay";
+
+ mdiobus = <&mdio0>;
+ phy-handle = <&phy4>;
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_eeprom_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&tcsr {
+ status = "okay";
+};
+
+&hs_phy_0 {
+ status = "okay";
+};
+
+&ss_phy_0 {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&hs_phy_1 {
+ status = "okay";
+};
+
+&ss_phy_1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&eeprom {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_eeprom_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_eeprom_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064.dtsi"
+
+/ {
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&gsbi4 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ serial@16340000 {
+ status = "okay";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+};
+
+&CPU_SPC {
+ status = "okay";
+};
+
+&pcie0 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+ ports-implemented = <0x1>;
+};
+
+&ss_phy_0 {
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TP-Link Archer VR2600v";
+ compatible = "tplink,vr2600v", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power;
+ led-failsafe = &general;
+ led-running = &power;
+ led-upgrade = &general;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ dect {
+ label = "dect";
+ gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ ledswitch {
+ label = "ledswitch";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LIGHTS_TOGGLE>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ dsl {
+ label = "white:dsl";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "white:usb";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "white:lan";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "white:wlan2g";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "white:wlan5g";
+ gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ phone {
+ label = "white:phone";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ general: general {
+ label = "white:general";
+ gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
+ "gpio26", "gpio53", "gpio56", "gpio66";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi4: spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "SBL2";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "SBL3";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "DDRCONFIG";
+ reg = <0x100000 0x10000>;
+ read-only;
+ };
+
+ partition@110000 {
+ label = "SSD";
+ reg = <0x110000 0x10000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "TZ";
+ reg = <0x120000 0x80000>;
+ read-only;
+ };
+
+ partition@1a0000 {
+ label = "RPM";
+ reg = <0x1a0000 0x80000>;
+ read-only;
+ };
+
+ partition@220000 {
+ label = "APPSBL";
+ reg = <0x220000 0x80000>;
+ read-only;
+ };
+
+ partition@2a0000 {
+ label = "APPSBLENV";
+ reg = <0x2a0000 0x40000>;
+ read-only;
+ };
+
+ partition@2e0000 {
+ label = "OLDART";
+ reg = <0x2e0000 0x40000>;
+ read-only;
+ };
+
+ partition@320000 {
+ label = "firmware";
+ reg = <0x320000 0xc60000>;
+ compatible = "openwrt,uimage";
+ openwrt,offset = <512>; /* account for pad-extra 512 */
+ };
+
+ /* hole 0xf80000 - 0xfaf100 */
+
+ partition@faf100 {
+ label = "default-mac";
+ reg = <0xfaf100 0x00200>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_defaultmac_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+ };
+
+ partition@fc0000 {
+ label = "ART";
+ reg = <0xfc0000 0x40000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(-1)>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_defaultmac_0>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_defaultmac_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "NEC Aterm WG2600HP";
+ compatible = "nec,wg2600hp", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_green;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ bridge {
+ label = "bridge";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ converter {
+ label = "converter";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ converter_green {
+ label = "green:converter";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_red: power_red {
+ label = "red:power";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ active_green {
+ label = "green:active";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ active_red {
+ label = "red:active";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_green: power_green {
+ label = "green:power";
+ gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ converter_red {
+ label = "red:converter";
+ gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_red {
+ label = "red:wlan2g";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_red {
+ label = "red:wlan5g";
+ gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ tv_green {
+ label = "green:tv";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+
+ tv_red {
+ label = "red:tv";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&CPU_SPC {
+ status = "disabled";
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x06000000 /* PAD0_MODE */
+ 0x0000c 0x00080080 /* PAD6_MODE */
+ 0x000e4 0x0006a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x0000004e /* PORT0_STATUS */
+ 0x00094 0x0000004e /* PORT6_STATUS */
+ >;
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi5 {
+ status = "okay";
+
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ MIBIB@20000 {
+ label = "MIBIB";
+ reg = <0x20000 0x20000>;
+ read-only;
+ };
+
+ SBL2@40000 {
+ label = "SBL2";
+ reg = <0x40000 0x40000>;
+ read-only;
+ };
+
+ SBL3@80000 {
+ label = "SBL3";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ DDRCONFIG@100000 {
+ label = "DDRCONFIG";
+ reg = <0x100000 0x10000>;
+ read-only;
+ };
+
+ SSD@110000 {
+ label = "SSD";
+ reg = <0x110000 0x10000>;
+ read-only;
+ };
+
+ TZ@120000 {
+ label = "TZ";
+ reg = <0x120000 0x80000>;
+ read-only;
+ };
+
+ RPM@1a0000 {
+ label = "RPM";
+ reg = <0x1a0000 0x80000>;
+ read-only;
+ };
+
+ APPSBL@220000 {
+ label = "APPSBL";
+ reg = <0x220000 0x80000>;
+ read-only;
+ };
+
+ APPSBLENV@2a0000 {
+ label = "APPSBLENV";
+ reg = <0x2a0000 0x10000>;
+ };
+
+ PRODUCTDATA: PRODUCTDATA@2b0000 {
+ label = "PRODUCTDATA";
+ reg = <0x2b0000 0x30000>;
+ read-only;
+ };
+
+ ART@2e0000 {
+ label = "ART";
+ reg = <0x2e0000 0x40000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ TP@320000 {
+ label = "TP";
+ reg = <0x320000 0x40000>;
+ read-only;
+ };
+
+ TINY@360000 {
+ label = "TINY";
+ reg = <0x360000 0x500000>;
+ read-only;
+ };
+
+ firmware@860000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x860000 0x17a0000>;
+ };
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio16", "gpio54", "gpio24", "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
+ "gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
+ "gpio64", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ usb_pwr_en_pins: usb_pwr_en_pins {
+ mux {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+};
+
+&PRODUCTDATA {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_PRODUCTDATA_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_c: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+
+ macaddr_PRODUCTDATA_12: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
+ * Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
+ * All rights reserved.
+ */
+
+#include "qcom-ipq8064-v1.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ compatible = "compex,wpq864", "qcom,ipq8064";
+ model = "Compex WPQ864";
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ ethernet0 = &gmac1;
+ ethernet1 = &gmac0;
+
+ led-boot = &led_pass;
+ led-failsafe = &led_fail;
+ led-running = &led_pass;
+ led-upgrade = &led_pass;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ rss4 {
+ label = "green:rss4";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ rss3 {
+ label = "green:rss3";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ rss2 {
+ label = "orange:rss2";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ rss1 {
+ label = "red:rss1";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_pass: pass {
+ label = "green:pass";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_fail: fail {
+ label = "green:fail";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "green:usb";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb-pcie {
+ label = "green:usb-pcie";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+
+ pinctrl-0 = <&beeper_pins>;
+ pinctrl-names = "default";
+
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&rpm {
+ pinctrl-0 = <&rpm_pins>;
+ pinctrl-names = "default";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ mt29f2g08abbeah4@0 {
+ compatible = "qcom,nandcs";
+
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ MIBIB@40000 {
+ label = "MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+
+ SBL2@180000 {
+ label = "SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+
+ SBL3@2c0000 {
+ label = "SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+
+ DDRCONFIG@540000 {
+ label = "DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+
+ SSD@660000 {
+ label = "SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+
+ TZ@780000 {
+ label = "TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+
+ RPM@a00000 {
+ label = "RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+
+ APPSBL@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ APPSBLENV@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ };
+
+ ART@1200000 {
+ label = "ART";
+ reg = <0x1200000 0x0140000>;
+ };
+
+ ubi@1340000 {
+ label = "ubi";
+ reg = <0x1340000 0x4000000>;
+ };
+
+ BOOTCONFIG@5340000 {
+ label = "BOOTCONFIG";
+ reg = <0x5340000 0x0060000>;
+ };
+
+ SBL2-1@53a0000- {
+ label = "SBL2_1";
+ reg = <0x53a0000 0x0140000>;
+ read-only;
+ };
+
+ SBL3-1@54e0000 {
+ label = "SBL3_1";
+ reg = <0x54e0000 0x0280000>;
+ read-only;
+ };
+
+ DDRCONFIG-1@5760000 {
+ label = "DDRCONFIG_1";
+ reg = <0x5760000 0x0120000>;
+ read-only;
+ };
+
+ SSD-1@5880000 {
+ label = "SSD_1";
+ reg = <0x5880000 0x0120000>;
+ read-only;
+ };
+
+ TZ-1@59a0000 {
+ label = "TZ_1";
+ reg = <0x59a0000 0x0280000>;
+ read-only;
+ };
+
+ RPM-1@5c20000 {
+ label = "RPM_1";
+ reg = <0x5c20000 0x0280000>;
+ read-only;
+ };
+
+ BOOTCONFIG1@5ea0000 {
+ label = "BOOTCONFIG1";
+ reg = <0x5ea0000 0x0060000>;
+ };
+
+ APPSBL-1@5f00000 {
+ label = "APPSBL_1";
+ reg = <0x5f00000 0x0500000>;
+ read-only;
+ };
+
+ ubi-1@6400000 {
+ label = "ubi_1";
+ reg = <0x6400000 0x4000000>;
+ };
+
+ unused@a400000 {
+ label = "unused";
+ reg = <0xa400000 0x5c00000>;
+ };
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi4_serial {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&flash {
+ compatible = "jedec,spi-nor";
+};
+
+&sata_phy {
+ status = "disabled";
+};
+
+&sata {
+ status = "disabled";
+};
+
+&ss_phy_0 { /* USB3 port 0 SS phy */
+ status = "okay";
+
+ rx_eq = <2>;
+ tx_deamp_3_5db = <32>;
+ mpll = <160>;
+};
+
+&ss_phy_1 { /* USB3 port 1 SS phy */
+ status = "okay";
+
+ rx_eq = <2>;
+ tx_deamp_3_5db = <32>;
+ mpll = <160>;
+};
+
+&pcie0 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie2 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+};
+
+&qcom_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinctrl0 {
+ pcie0_pcie2_perst {
+ pins = "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio22",
+ "gpio23", "gpio24", "gpio25", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ beeper_pins: beeper_pins {
+ mux {
+ pins = "gpio55";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ rpm_pins: rpm_pins {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+
+ uart0_pins: uart0_pins {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "gsbi4";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+
+ clk {
+ pins = "gpio21";
+ function = "gsbi5";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&tcsr {
+ qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Buffalo WXR-2533DHP";
+ compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
+
+ memory@42000000 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &diag;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ /* use "ubi_rootfs" volume in "ubi" partition as rootfs */
+ bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ usb {
+ label = "green:usb";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&hub_port0 &hub_port1>;
+ };
+
+ guestport {
+ label = "green:guestport";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ diag: diag {
+ label = "orange:diag";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet_orange {
+ label = "orange:internet";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ internet_white {
+ label = "white:internet";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wireless_orange {
+ label = "orange:wireless";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wireless_white {
+ label = "white:wireless";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_orange {
+ label = "orange:router";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ router_white {
+ label = "white:router";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ power {
+ label = "power";
+ gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ eject {
+ label = "eject";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_EJECTCD>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ guest {
+ label = "guest";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ router {
+ label = "router";
+ gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ cs@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ubi@0 {
+ label = "ubi";
+ reg = <0x0000000 0x4000000>;
+ };
+
+ rootfs_1@4000000 {
+ label = "rootfs_1";
+ reg = <0x4000000 0x4000000>;
+ };
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x07600000 /* PAD0_MODE */
+ 0x00008 0x01000000 /* PAD5_MODE */
+ 0x0000c 0x00000080 /* PAD6_MODE */
+ 0x00050 0xcc35cc35 /* LED_CTRL0 */
+ 0x00054 0xca35ca35 /* LED_CTRL1 */
+ 0x00058 0xc935c935 /* LED_CTRL2 */
+ 0x0005c 0x03ffff00 /* LED_CTRL3 */
+ 0x000e4 0x0006a545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x0000007e /* PORT0_STATUS */
+ 0x00094 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_ART_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+
+ nvmem-cells = <&macaddr_ART_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gsbi4_serial {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&gsbi5 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_SPI>;
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0 0x10000>;
+ read-only;
+ };
+
+ MIBIB@10000 {
+ label = "MIBIB";
+ reg = <0x10000 0x20000>;
+ read-only;
+ };
+
+ SBL2@30000 {
+ label = "SBL2";
+ reg = <0x30000 0x30000>;
+ read-only;
+ };
+
+ SBL3@60000 {
+ label = "SBL3";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+
+ DDRCONFIG@90000 {
+ label = "DDRCONFIG";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ SSD@a0000 {
+ label = "SSD";
+ reg = <0xa0000 0x10000>;
+ read-only;
+ };
+
+ TZ@b0000 {
+ label = "TZ";
+ reg = <0xb0000 0x30000>;
+ read-only;
+ };
+
+ RPM@e0000 {
+ label = "RPM";
+ reg = <0xe0000 0x20000>;
+ read-only;
+ };
+
+ APPSBL@100000 {
+ label = "APPSBL";
+ reg = <0x100000 0x70000>;
+ read-only;
+ };
+
+ APPSBLENV@170000 {
+ label = "APPSBLENV";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+
+ ART@180000 {
+ label = "ART";
+ reg = <0x180000 0x40000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_ART_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_ART_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ macaddr_ART_18: macaddr@18 {
+ reg = <0x18 0x6>;
+ };
+
+ macaddr_ART_1e: macaddr@1e {
+ reg = <0x1e 0x6>;
+ };
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ BOOTCONFIG@1c0000 {
+ label = "BOOTCONFIG";
+ reg = <0x1c0000 0x10000>;
+ read-only;
+ };
+
+ APPSBL_1@1d0000 {
+ label = "APPSBL_1";
+ reg = <0x1d0000 0x70000>;
+ read-only;
+ };
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&dwc3_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port0: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&dwc3_1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_ART_1e>, <&precal_ART_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&macaddr_ART_18>, <&precal_ART_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
+ "gpio58", "gpio64", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
+ "gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ uart0_pins: uart0_pins {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs{
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ usb_pwr_en_pins: usb_pwr_en_pins {
+ mux{
+ pins = "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ output-high;
+ };
+ };
+};
--- /dev/null
+#include "qcom-ipq8065.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "ZyXEL NBG6817";
+ compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ sdcc1 = &sdcc1;
+
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1";
+ append-rootblock = "root=/dev/mmcblk0p";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ internet {
+ label = "white:internet";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "white:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ wifi2g {
+ label = "amber:wifi2g";
+ gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* wifi2g amber from the manual is missing */
+
+ wifi5g {
+ label = "amber:wifi5g";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* wifi5g amber from the manual is missing */
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio53", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio9", "gpio26", "gpio33", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "gpio";
+ drive-strength = <12>;
+ };
+
+ pwr {
+ pins = "gpio17";
+ bias-pull-down;
+ output-high;
+ };
+
+ ovc {
+ pins = "gpio16";
+ bias-pull-up;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio14", "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ };
+
+ pwr {
+ pins = "gpio14";
+ bias-pull-down;
+ output-high;
+ };
+
+ ovc {
+ pins = "gpio15";
+ bias-pull-up;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi4: spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <51200000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ qca,ar8327-initvals = <
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x0000c 0x80 /* PAD6_MODE */
+ >;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <1>;
+ qcom,phy_mii_type = <0>;
+ qcom,emulation = <0>;
+ qcom,irq = <255>;
+ mdiobus = <&mdio0>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,phy_mii_type = <1>;
+ qcom,emulation = <0>;
+ qcom,irq = <258>;
+ mdiobus = <&mdio0>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&amba {
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+#include "qcom-ipq8065.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ reserved-memory {
+ rsvd@5fe00000 {
+ reg = <0x5fe00000 0x200000>;
+ reusable;
+ };
+
+ ramoops@42100000 {
+ compatible = "ramoops";
+ reg = <0x42100000 0x40000>;
+ record-size = <0x4000>;
+ console-size = <0x4000>;
+ ftrace-size = <0x4000>;
+ pmsg-size = <0x4000>;
+ };
+ };
+
+ aliases {
+ label-mac-device = &gmac2;
+
+ led-boot = &power_white;
+ led-failsafe = &power_amber;
+ led-running = &power_white;
+ led-upgrade = &power_amber;
+
+ mdio-gpio0 = &mdio0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ wifi {
+ label = "wifi";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ power_white: power_white {
+ label = "white:power";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_white {
+ label = "white:wan";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi {
+ label = "white:wifi";
+ gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "white:wps";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9",
+ "gpio22", "gpio23", "gpio24",
+ "gpio26", "gpio53", "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ tx {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32";
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ bias-pull-down;
+ };
+
+ data {
+ pins = "gpio18", "gpio19";
+ drive-strength = <10>;
+ };
+
+ cs {
+ pins = "gpio20";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio21";
+ drive-strength = <12>;
+ };
+ };
+
+ spi6_pins: spi6_pins {
+ mux {
+ pins = "gpio55", "gpio56", "gpio58";
+ function = "gsbi6";
+ bias-pull-down;
+ };
+
+ mosi {
+ pins = "gpio55";
+ drive-strength = <12>;
+ };
+
+ miso {
+ pins = "gpio56";
+ drive-strength = <14>;
+ };
+
+ cs {
+ pins = "gpio57";
+ drive-strength = <12>;
+ bias-pull-up;
+ };
+
+ clk {
+ pins = "gpio58";
+ drive-strength = <12>;
+ };
+
+ reset {
+ pins = "gpio33";
+ drive-strength = <10>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb0_pwr_en_pins: usb0_pwr_en_pins {
+ mux {
+ pins = "gpio15";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ usb1_pwr_en_pins: usb1_pwr_en_pins {
+ mux {
+ pins = "gpio16", "gpio68";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x1180000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "qcadata";
+ reg = <0x0000000 0x0c80000>;
+ read-only;
+ };
+
+ partition@c80000 {
+ label = "APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ partition@1180000 {
+ label = "APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ read-only;
+ };
+
+ art: partition@1200000 {
+ label = "art";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_art_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@1340000 {
+ label = "artbak";
+ reg = <0x1340000 0x0140000>;
+ read-only;
+ };
+
+ partition@1480000 {
+ label = "kernel";
+ reg = <0x1480000 0x0400000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
+ 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
+ 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
+ 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
+ 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
+ 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
+ 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
+ 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
+ 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
+ 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
+ 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
+ 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
+ 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
+ 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
+ >;
+ qca,ar8327-vlans = <
+ 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
+ 0x2 0x21 /* VLAN2 Ports 0/5 */
+ >;
+ };
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ qca,ar8327-initvals = <
+ 0x000e4 0x6a545 /* MAC_POWER_SEL */
+ 0x0000c 0x80 /* PAD6_MODE */
+ >;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+
+ phy-mode = "rgmii";
+ qcom,id = <1>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <0>;
+ qcom,rgmii_delay = <1>;
+ qcom,phy_mii_type = <0>;
+ qcom,emulation = <0>;
+ qcom,irq = <255>;
+ mdiobus = <&mdio0>;
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ nvmem-cells = <&macaddr_art_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ qcom,id = <2>;
+ qcom,phy_mdio_addr = <0>; /* none */
+ qcom,poll_required = <0>; /* no polling */
+ qcom,rgmii_delay = <0>;
+ qcom,phy_mii_type = <1>;
+ qcom,emulation = <0>;
+ qcom,irq = <258>;
+ mdiobus = <&mdio0>;
+
+ nvmem-cells = <&macaddr_art_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+
+ pinctrl-0 = <&usb0_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&usb3_1 {
+ status = "okay";
+
+ pinctrl-0 = <&usb1_pwr_en_pins>;
+ pinctrl-names = "default";
+};
+
+&pcie0 {
+ status = "okay";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
--- /dev/null
+#include "qcom-ipq8065-nighthawk.dtsi"
+
+/ {
+ model = "Netgear Nighthawk X4S R7800";
+ compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
+};
+
+&leds {
+ usb1 {
+ label = "white:usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ esata {
+ label = "white:esata";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&partitions {
+ partition@1880000 {
+ label = "ubi";
+ reg = <0x1880000 0x6080000>;
+ };
+
+ partition@7900000 {
+ label = "reserve";
+ reg = <0x7900000 0x0700000>;
+ read-only;
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(1)>;
+};
+
+&wifi1 {
+ nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <(2)>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq8065.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Askey RT4230W REV6";
+ compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x3e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &ledctrl3;
+ led-failsafe = &ledctrl1;
+ led-running = &ledctrl2;
+ led-upgrade = &ledctrl3;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ ledctrl1: ledctrl1 {
+ label = "ledctrl1";
+ gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ ledctrl2: ledctrl2 {
+ label = "ledctrl2";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ ledctrl3: ledctrl3 {
+ label = "ledctrl3";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio54", "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio22", "gpio23", "gpio24";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "everspin,mr25h256";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "0:SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "0:SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+
+ partition@540000 {
+ label = "0:DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+
+ partition@660000 {
+ label = "0:SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+
+ partition@780000 {
+ label = "0:TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+
+ partition@a00000 {
+ label = "0:RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+
+ partition@c80000 {
+ label = "0:APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+
+ partition@1180000 {
+ label = "0:APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ };
+
+ partition@1200000 {
+ label = "0:ART";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_ART_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_ART_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@1340000 {
+ label = "0:BOOTCONFIG";
+ reg = <0x1340000 0x0060000>;
+ read-only;
+ };
+
+ partition@13a0000 {
+ label = "0:SBL2_1";
+ reg = <0x13a0000 0x0140000>;
+ read-only;
+ };
+
+ partition@14e0000 {
+ label = "0:SBL3_1";
+ reg = <0x14e0000 0x0280000>;
+ read-only;
+ };
+
+ partition@1760000 {
+ label = "0:DDRCONFIG_1";
+ reg = <0x1760000 0x0120000>;
+ read-only;
+ };
+
+ partition@1880000 {
+ label = "0:SSD_1";
+ reg = <0x1880000 0x0120000>;
+ read-only;
+ };
+
+ partition@19a0000 {
+ label = "0:TZ_1";
+ reg = <0x19a0000 0x0280000>;
+ read-only;
+ };
+
+ partition@1c20000 {
+ label = "0:RPM_1";
+ reg = <0x1c20000 0x0280000>;
+ read-only;
+ };
+
+ partition@1ea0000 {
+ label = "0:BOOTCONFIG1";
+ reg = <0x1ea0000 0x0060000>;
+ read-only;
+ };
+
+ partition@1f00000 {
+ label = "0:APPSBL_1";
+ reg = <0x1f00000 0x0500000>;
+ read-only;
+ };
+
+ partition@2400000 {
+ label = "ubi";
+ reg = <0x2400000 0x1a000000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ 0x00050 0xcf02cf02 /* LED_CTRL_0 */
+ 0x00054 0xc832c832 /* LED_CTRL_1 */
+ >;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+
+ nvmem-cells = <&macaddr_ART_0>;
+ nvmem-cell-names = "mac-address";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ nvmem-cells = <&macaddr_ART_6>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_1000>;
+ nvmem-cell-names = "pre-calibration";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_5000>;
+ nvmem-cell-names = "pre-calibration";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq8065.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Arris TR4400 v2";
+ compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064";
+
+ memory@0 {
+ reg = <0x42000000 0x1e000000>;
+ device_type = "memory";
+ };
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs noinitrd";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_status_red: status_red {
+ label = "red:status";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_blue: status_blue {
+ label = "blue:status";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ button_pins: button_pins {
+ mux {
+ pins = "gpio6", "gpio54";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio7", "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ tx {
+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
+ input-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ cs {
+ pins = "gpio20";
+ drive-strength = <12>;
+ };
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi@1a280000 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "everspin,mr25h256";
+ spi-max-frequency = <40000000>;
+ reg = <0>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ reg = <0>;
+ compatible = "qcom,nandcs";
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0000000 0x0040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x0040000 0x0140000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "0:SBL2";
+ reg = <0x0180000 0x0140000>;
+ read-only;
+ };
+ partition@2c0000 {
+ label = "0:SBL3";
+ reg = <0x02c0000 0x0280000>;
+ read-only;
+ };
+ partition@540000 {
+ label = "0:DDRCONFIG";
+ reg = <0x0540000 0x0120000>;
+ read-only;
+ };
+ partition@660000 {
+ label = "0:SSD";
+ reg = <0x0660000 0x0120000>;
+ read-only;
+ };
+ partition@780000 {
+ label = "0:TZ";
+ reg = <0x0780000 0x0280000>;
+ read-only;
+ };
+ partition@a00000 {
+ label = "0:RPM";
+ reg = <0x0a00000 0x0280000>;
+ read-only;
+ };
+ partition@c80000 {
+ label = "0:APPSBL";
+ reg = <0x0c80000 0x0500000>;
+ read-only;
+ };
+ partition@1180000 {
+ label = "0:APPSBLENV";
+ reg = <0x1180000 0x0080000>;
+ };
+ partition@1200000 {
+ label = "0:ART";
+ reg = <0x1200000 0x0140000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_ART_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+ precal_ART_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+ stock_partition@1340000 {
+ label = "stock_rootfs";
+ reg = <0x1340000 0x4000000>;
+ };
+ partition@5340000 {
+ label = "0:BOOTCONFIG";
+ reg = <0x5340000 0x0060000>;
+ read-only;
+ };
+ partition@53a0000 {
+ label = "0:SBL2_1";
+ reg = <0x53a0000 0x0140000>;
+ read-only;
+ };
+ partition@54e0000 {
+ label = "0:SBL3_1";
+ reg = <0x54e0000 0x0280000>;
+ read-only;
+ };
+ partition@5760000 {
+ label = "0:DDRCONFIG_1";
+ reg = <0x5760000 0x0120000>;
+ read-only;
+ };
+ partition@5880000 {
+ label = "0:SSD_1";
+ reg = <0x5880000 0x0120000>;
+ read-only;
+ };
+ partition@59a0000 {
+ label = "0:TZ_1";
+ reg = <0x59a0000 0x0280000>;
+ read-only;
+ };
+ partition@5c20000 {
+ label = "0:RPM_1";
+ reg = <0x5c20000 0x0280000>;
+ read-only;
+ };
+ partition@5ea0000 {
+ label = "0:BOOTCONFIG1";
+ reg = <0x5ea0000 0x0060000>;
+ read-only;
+ };
+ partition@5f00000 {
+ label = "0:APPSBL_1";
+ reg = <0x5f00000 0x0500000>;
+ read-only;
+ };
+ stock_partition@6400000 {
+ label = "stock_rootfs_1";
+ reg = <0x6400000 0x4000000>;
+ };
+ stock_partition@a400000 {
+ label = "stock_fw_env";
+ reg = <0xa400000 0x0100000>;
+ };
+ stock_partition@a500000 {
+ label = "stock_config";
+ reg = <0xa500000 0x0800000>;
+ };
+ stock_partition@ad00000 {
+ label = "stock_PKI";
+ reg = <0xad00000 0x0200000>;
+ };
+ stock_partition@af00000 {
+ label = "stock_scfgmgr";
+ reg = <0xaf00000 0x0100000>;
+ };
+
+ partition@6400000 {
+ label = "fw_env";
+ reg = <0x6400000 0x0100000>;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_fw_env_0: macaddr@0 {
+ reg = <0x00 0x6>;
+ };
+ macaddr_fw_env_6: macaddr@6 {
+ reg = <0x06 0x6>;
+ };
+ macaddr_fw_env_c: macaddr@c {
+ reg = <0x0c 0x6>;
+ };
+ macaddr_fw_env_12: macaddr@12 {
+ reg = <0x12 0x6>;
+ };
+ macaddr_fw_env_18: macaddr@18 {
+ reg = <0x18 0x6>;
+ };
+ };
+ partition@6500000 {
+ label = "ubi";
+ reg = <0x6500000 0x9b00000>;
+ };
+ partition@1340000 {
+ label = "extra";
+ reg = <0x1340000 0x4000000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ ethernet-phy@0 {
+ reg = <0x0>;
+ qca,ar8327-initvals = <
+ 0x00004 0x7600000 /* PAD0_MODE */
+ 0x00008 0x1000000 /* PAD5_MODE */
+ 0x0000c 0x80 /* PAD6_MODE */
+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
+ 0x000e0 0xc74164de /* SGMII_CTRL */
+ 0x0007c 0x4e /* PORT0_STATUS */
+ 0x00094 0x4e /* PORT6_STATUS */
+ >;
+ };
+
+ phy7: ethernet-phy@7 {
+ reg = <7>;
+ };
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii";
+ qcom,id = <0>;
+
+ nvmem-cells = <&macaddr_fw_env_18>;
+ nvmem-cell-names = "mac-address";
+
+ pinctrl-0 = <&rgmii2_pins>;
+ pinctrl-names = "default";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <1>;
+
+ nvmem-cells = <&macaddr_fw_env_0>;
+ nvmem-cell-names = "mac-address";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&gmac3 {
+ status = "okay";
+ phy-mode = "sgmii";
+ qcom,id = <3>;
+ phy-handle = <&phy7>;
+
+ nvmem-cells = <&macaddr_fw_env_6>;
+ nvmem-cell-names = "mac-address";
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "pci168c,0046";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>;
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+ reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+ max-link-speed = <1>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "pci168c,0040";
+ reg = <0x00010000 0 0 0 0>;
+
+ nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>;
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8065-nighthawk.dtsi"
+
+/ {
+ model = "Netgear Nighthawk XR500";
+ compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064";
+
+};
+
+&leds {
+ usb1 {
+ label = "white:usb1";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb2 {
+ label = "white:usb2";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&partitions {
+ partition@1880000 {
+ label = "ubi";
+ reg = <0x1880000 0xce00000>;
+ };
+
+ partition@e680000 {
+ label = "reserve";
+ reg = <0xe680000 0x0780000>;
+ read-only;
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+};
+
+&wifi1 {
+ nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+};
+
+&art {
+ macaddr_art_c: macaddr@c {
+ reg = <0xc 0x6>;
+ };
+};
--- /dev/null
+#include "qcom-ipq8064.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8065";
+ compatible = "qcom,ipq8065", "qcom,ipq8064";
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+};
+
+&gsbi4 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "okay";
+
+ serial@16340000 {
+ status = "okay";
+ };
+ /*
+ * The i2c device on gsbi4 should not be enabled.
+ * On ipq806x designs gsbi4 i2c is meant for exclusive
+ * RPM usage. Turning this on in kernel manifests as
+ * i2c failure for the RPM.
+ */
+};
+
+&pcie0 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+ compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+ ports-implemented = <0x1>;
+};
+
+&smb208_s2a {
+ regulator-min-microvolt = <775000>;
+ regulator-max-microvolt = <1275000>;
+};
+
+&smb208_s2b {
+ regulator-min-microvolt = <775000>;
+ regulator-max-microvolt = <1275000>;
+};
+
+&ss_phy_0 {
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+ qcom,rx-eq = <2>;
+ qcom,tx-deamp_3_5db = <32>;
+ qcom,mpll = <5>;
+};
+
+&opp_table_l2 {
+ /delete-node/opp-1200000000;
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+};
+
+&opp_table0 {
+ /*
+ * On ipq8065 1.2 ghz freq is not present
+ * Remove it to make cpufreq work and not
+ * complain for missing definition
+ */
+
+ /delete-node/opp-1200000000;
+
+ /*
+ * Voltage thresholds are <target min max>
+ */
+ opp-384000000 {
+ opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
+ opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
+ opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
+ };
+
+ opp-600000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
+ opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
+ opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
+ };
+
+ opp-800000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
+ opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
+ opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
+ };
+
+ opp-1000000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
+ opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
+ opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
+ opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
+ };
+
+ opp-1400000000 {
+ opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
+ opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
+ opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
+ opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
+ opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
+ opp-level = <1>;
+ };
+
+ opp-1725000000 {
+ opp-hz = /bits/ 64 <1725000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
+ opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
+ opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
+ opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
+ opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
+ opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
+ opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+/ {
+ memory {
+ device_type = "memory";
+ linux,usable-memory = <0x41500000 0x1ea00000>;
+ reg = <0x40000000 0x20000000>;
+ };
+
+ cpus {
+ idle-states {
+ CPU_SPC: spc {
+ status = "disabled";
+ };
+ };
+ };
+
+ chosen {
+ bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
+ };
+};
+
+&qcom_pinmux {
+ mdio0_pins_active: mdio0_pins_active {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
+ };
+
+ clk {
+ pins = "gpio1";
+ input-disable;
+ };
+ };
+
+ phy_active: phy_active {
+ phy {
+ pins = "gpio6", "gpio7";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-high;
+ };
+ };
+
+ uart1_pins: uart1_pins {
+ mux {
+ pins = "gpio51", "gpio52";
+ function = "gsbi1";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+};
+
+&gsbi1 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
+
+ serial@12450000 {
+ status = "okay";
+
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x0 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi0: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x10000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x0 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi1: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x10000 0 0 0 0>;
+ };
+ };
+};
+
+&pcie2 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x0 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x10000 0 0 0 0>;
+ };
+ };
+};
+
+&adm_dma {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ compatible = "qcom,nandcs";
+
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ nand-is-boot-medium;
+ qcom,boot_pages_size = <0x2140000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "sbl1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "mibib";
+ reg = <0x40000 0x140000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "sbl2";
+ reg = <0x180000 0x140000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "sbl3";
+ reg = <0x2c0000 0x280000>;
+ read-only;
+ };
+
+ partition@540000 {
+ label = "ddrconfig";
+ reg = <0x540000 0x120000>;
+ read-only;
+ };
+
+ partition@660000 {
+ label = "ssd";
+ reg = <0x660000 0x120000>;
+ read-only;
+ };
+
+ partition@780000 {
+ label = "tz";
+ reg = <0x780000 0x280000>;
+ read-only;
+ };
+
+ partition@a00000 {
+ label = "rpm";
+ reg = <0xa00000 0x280000>;
+ read-only;
+ };
+
+ partition@1fc0000 {
+ label = "u-boot";
+ reg = <0x1fc0000 0x180000>;
+ read-only;
+ };
+
+ partition@21c0000 {
+ label = "bootkernel1";
+ reg = <0x21c0000 0xa80000>;
+ };
+
+ partition@2c40000 {
+ label = "bootkernel2";
+ reg = <0x2c40000 0xa80000>;
+ };
+
+ partition@36c0000 {
+ label = "ubi";
+ reg = <0x36c0000 0x46c0000>;
+ };
+
+ partition@7d80000 {
+ label = "art";
+ reg = <0x7d80000 0x200000>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+#include "qcom-ipq8064-v2.0.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Edgecore ECW5410";
+ compatible = "edgecore,ecw5410", "qcom,ipq8064";
+
+ reserved-memory {
+ nss@40000000 {
+ reg = <0x40000000 0x1000000>;
+ no-map;
+ };
+
+ smem: smem@41000000 {
+ reg = <0x41000000 0x200000>;
+ no-map;
+ };
+
+ wifi_dump@44000000 {
+ reg = <0x44000000 0x600000>;
+ no-map;
+ };
+ };
+
+ cpus {
+ idle-states {
+ CPU_SPC: spc {
+ status = "disabled";
+ };
+ };
+ };
+
+ aliases {
+ serial1 = &gsbi1_serial;
+ ethernet0 = &gmac2;
+ ethernet1 = &gmac3;
+
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_green {
+ label = "green:wlan2g";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g_yellow {
+ label = "yellow:wlan2g";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g_green {
+ label = "green:wlan5g";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g_yellow {
+ label = "yellow:wlan5g";
+ gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+
+&qcom_pinmux {
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+
+ clk {
+ pins = "gpio21";
+ function = "gsbi5";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+
+ cs {
+ pins = "gpio20";
+ function = "gpio";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio16", "gpio23", "gpio24", "gpio26",
+ "gpio28", "gpio59";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ uart1_pins: uart1_pins {
+ mux {
+ pins = "gpio51", "gpio52", "gpio53", "gpio54";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-none;
+ };
+ };
+};
+
+&gsbi1 {
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
+ status = "okay";
+
+ serial@12450000 {
+ status = "okay";
+
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ };
+};
+
+&gsbi5 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "okay";
+
+ spi4: spi@1a280000 {
+ status = "okay";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "qcom,smem-part";
+ };
+ };
+ };
+};
+
+&hs_phy_0 { /* USB3 port 0 HS phy */
+ status = "okay";
+};
+
+&hs_phy_1 { /* USB3 port 1 HS phy */
+ status = "okay";
+};
+
+&ss_phy_0 { /* USB3 port 0 SS phy */
+ status = "okay";
+};
+
+&ss_phy_1 { /* USB3 port 1 SS phy */
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
+ };
+ };
+};
+
+&pcie2 {
+ status = "okay";
+
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ /delete-property/ perst-gpios;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ compatible = "qcom,nandcs";
+
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ rootfs1@0 {
+ label = "rootfs1";
+ reg = <0x0000000 0x4000000>;
+ };
+
+ rootfs2@4000000 {
+ label = "rootfs2";
+ reg = <0x4000000 0x4000000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ qcom,id = <2>;
+ mdiobus = <&mdio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy1>;
+};
+
+&gmac3 {
+ status = "okay";
+
+ qcom,id = <3>;
+ mdiobus = <&mdio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&adm_dma {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8068-cryptid-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Meraki MR42";
+ compatible = "meraki,mr42", "qcom,ipq8064";
+
+ aliases {
+ serial1 = &gsbi1_serial;
+ ethernet0 = &gmac3;
+
+ led-boot = &led_active;
+ led-failsafe = &led_power;
+ led-running = &led_active;
+ led-upgrade = &led_active;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power: power {
+ label = "orange:power";
+ gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_active: active {
+ label = "white:active";
+ gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gmac3 {
+ status = "okay";
+
+ qcom,id = <3>;
+ mdiobus = <&mdio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy2>;
+
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gsbi2 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+};
+
+&gsbi2_i2c {
+ status = "okay";
+
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ ina2xx@40 {
+ compatible = "ina219";
+ shunt-resistor = <40000>;
+ reg = <0x40>;
+ };
+
+ eeprom@56 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ reg = <0x56>;
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
+ };
+};
+
+&gsbi6 {
+ qcom,mode = <GSBI_PROT_I2C>;
+ status = "okay";
+};
+
+&gsbi6_i2c {
+ status = "okay";
+
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ tlc591xx@40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59108";
+ reg = <0x40>;
+
+ red@0 {
+ label = "red:user";
+ reg = <0x0>;
+ };
+
+ green@1 {
+ label = "green:user";
+ reg = <0x1>;
+ };
+
+ blue@2 {
+ label = "blue:user";
+ reg = <0x2>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
+ pinctrl-names = "default";
+
+ phy2: ethernet-phy2 {
+ reg = <2>;
+
+ reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <24000>;
+
+ eee-broken-100tx;
+ eee-broken-1000t;
+ };
+};
+
+&qcom_pinmux {
+ i2c0_pins: i2c0_pins {
+ mux {
+ pins = "gpio24", "gpio25";
+ function = "gsbi2";
+ drive-strength = <2>;
+ bias-pull-up;
+ input;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio26";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ i2c1_pins: i2c1_pins {
+ mux {
+ pins = "gpio29", "gpio30";
+ function = "gsbi6";
+ drive-strength = <2>;
+ bias-pull-up;
+ input;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio31", "gpio32";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&wifi1 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <2>;
+};
+
+&wifi2 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <3>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8068-cryptid-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Meraki MR52";
+ compatible = "meraki,mr52", "qcom,ipq8064";
+
+ aliases {
+ serial1 = &gsbi1_serial;
+ mdio-gpio0 = &mdio_gpio0;
+ ethernet0 = &gmac2;
+ ethernet1 = &gmac3;
+
+ led-boot = &led_active;
+ led-failsafe = &led_power;
+ led-running = &led_active;
+ led-upgrade = &led_active;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_power: power {
+ label = "orange:power";
+ gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2_green {
+ label = "green:lan2";
+ gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1_green {
+ label = "green:lan1";
+ gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_active: active {
+ label = "white:active";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_orange {
+ label = "orange:lan2";
+ gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1_orange {
+ label = "orange:lan1";
+ gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gmac2 {
+ status = "okay";
+
+ qcom,id = <2>;
+ mdiobus = <&mdio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+};
+
+&gmac3 {
+ status = "okay";
+
+ qcom,id = <3>;
+ mdiobus = <&mdio_gpio0>;
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy4>;
+
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+};
+
+&gsbi7 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+};
+
+&gsbi7_i2c {
+ status = "okay";
+
+ pinctrl-0 = <&i2c_pins>;
+ pinctrl-names = "default";
+
+ ina2xx@45 {
+ compatible = "ina219";
+ shunt-resistor = <80000>;
+ reg = <0x45>;
+ };
+
+ tlc591xx@49 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59108";
+ reg = <0x49>;
+
+ red@0 {
+ label = "red:user";
+ reg = <0x0>;
+ };
+
+ green@1 {
+ label = "green:user";
+ reg = <0x1>;
+ };
+
+ blue@2 {
+ label = "blue:user";
+ reg = <0x2>;
+ };
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ reg = <0x52>;
+ read-only;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ mac_address: mac-address@66 {
+ reg = <0x66 0x6>;
+ };
+ };
+};
+
+&qcom_pinmux {
+ i2c_pins: i2c_pins {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "gsbi7";
+ drive-strength = <2>;
+ bias-pull-up;
+ input;
+ };
+ };
+
+ led_pins: led_pins {
+ mux {
+ pins = "gpio19", "gpio26";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+
+ button_pins: button_pins {
+ mux {
+ pins = "gpio25";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ input;
+ };
+ };
+};
+
+&soc {
+ mdio_gpio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "okay";
+
+ pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
+ pinctrl-names = "default";
+
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH
+ &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+
+ phy0: ethernet-phy0 {
+ reg = <0>;
+ reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <24000>;
+ };
+
+ phy4: ethernet-phy4 {
+ reg = <4>;
+ reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <24000>;
+ };
+ };
+};
+
+&wifi0 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <4>;
+};
+
+&wifi1 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <3>;
+};
+
+&wifi2 {
+ nvmem-cells = <&mac_address>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <2>;
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8062.dtsi"
-#include <dt-bindings/input/input.h>
-
-/delete-node/ &nand_pins;
-
-/ {
- model = "NEC Platforms Aterm WG2600HP3";
- compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064";
-
- memory {
- device_type = "memory";
- reg = <0x42000000 0x1e000000>;
- };
-
- aliases {
- label-mac-device = &gmac2;
-
- led-boot = &led_power_green;
- led-failsafe = &led_power_red;
- led-running = &led_power_green;
- led-upgrade = &led_power_red;
- };
-
- keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&buttons_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- mode0 {
- label = "mode0";
- gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- mode1 {
- label = "mode1";
- gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&leds_pins>;
- pinctrl-names = "default";
-
- led_power_green: power_green {
- label = "green:power";
- gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
- };
-
- led_power_red: power_red {
- label = "red:power";
- gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>;
- };
-
- active_green {
- label = "green:active";
- gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>;
- };
-
- active_red {
- label = "red:active";
- gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_green {
- label = "green:wlan2g";
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- wlan2g_red {
- label = "red:wlan2g";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_green {
- label = "green:wlan5g";
- gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g_red {
- label = "red:wlan5g";
- gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
- };
-
- tv_green {
- label = "green:tv";
- gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>;
- };
-
- tv_red {
- label = "red:tv";
- gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>;
- };
-
- converter_green {
- label = "green:converter";
- gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>;
- };
-
- converter_red {
- label = "red:converter";
- gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- pinctrl-0 = <&akro_pins>;
- pinctrl-names = "default";
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <10>;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- buttons_pins: buttons_pins {
- mux {
- pins = "gpio22", "gpio24", "gpio40",
- "gpio41";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- leds_pins: leds_pins {
- mux {
- pins = "gpio14", "gpio15", "gpio35",
- "gpio36", "gpio38", "gpio42",
- "gpio43", "gpio46", "gpio55",
- "gpio56", "gpio57", "gpio58";
- function = "gpio";
- bias-pull-down;
- };
-
- akro2 {
- pins = "gpio15", "gpio35", "gpio38",
- "gpio42", "gpio43", "gpio46",
- "gpio55", "gpio56", "gpio57",
- "gpio58";
- drive-strength = <2>;
- };
-
- akro4 {
- pins = "gpio14", "gpio36";
- drive-strength = <4>;
- };
- };
-
- /*
- * Stock firmware has the following settings, so let's do the same.
- * I don't sure why these are required.
- */
- akro_pins: akro_pinmux {
- akro {
- pins = "gpio17", "gpio26", "gpio47";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- reset {
- pins = "gpio45";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- gmac0_rgmii {
- pins = "gpio25";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-};
-
-&gsbi5 {
- status = "okay";
- qcom,mode = <GSBI_PROT_SPI>;
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0000000 0x0020000>;
- read-only;
- };
-
- partition@20000 {
- label = "MIBIB";
- reg = <0x0020000 0x0020000>;
- read-only;
- };
-
- partition@40000 {
- label = "SBL2";
- reg = <0x0040000 0x0040000>;
- read-only;
- };
-
- partition@80000 {
- label = "SBL3";
- reg = <0x0080000 0x0080000>;
- read-only;
- };
-
- partition@100000 {
- label = "DDRCONFIG";
- reg = <0x0100000 0x0010000>;
- read-only;
- };
-
- partition@110000 {
- label = "SSD";
- reg = <0x0110000 0x0010000>;
- read-only;
- };
-
- partition@120000 {
- label = "TZ";
- reg = <0x0120000 0x0080000>;
- read-only;
- };
-
- partition@1a0000 {
- label = "RPM";
- reg = <0x01a0000 0x0080000>;
- read-only;
- };
-
- partition@220000 {
- label = "APPSBL";
- reg = <0x0220000 0x0080000>;
- read-only;
- };
-
- partition@2a0000 {
- label = "APPSBLENV";
- reg = <0x02a0000 0x0010000>;
- read-only;
- };
-
- factory: partition@2b0000 {
- label = "PRODUCTDATA";
- reg = <0x02b0000 0x0030000>;
- read-only;
- };
-
- partition@2e0000 {
- label = "ART";
- reg = <0x02e0000 0x0040000>;
- read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_ART_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_ART_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- partition@320000 {
- label = "TP";
- reg = <0x0320000 0x0040000>;
- read-only;
- };
-
- partition@360000 {
- label = "TINY";
- reg = <0x0360000 0x0500000>;
- read-only;
- };
-
- partition@860000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x0860000 0x17a0000>;
- };
- };
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
-
- qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
-
- nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- force_gen1 = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
-
- ieee80211-freq-limit = <2400000 2483000>;
- qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3";
-
- nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x04 0x80080080 /* PAD0_MODE */
- 0x0c 0x06000000 /* PAD6_MODE */
- 0x10 0x002613a0 /* PWS_REG */
- 0x50 0xcc36cc36 /* LED_CTRL0 */
- 0x54 0xca36ca36 /* LED_CTRL1 */
- 0x58 0xc936c936 /* LED_CTRL2 */
- 0x5c 0x03ffff00 /* LED_CTRL3 */
- 0x7c 0x0000004e /* PORT0_STATUS */
- 0x94 0x0000004e /* PORT6_STATUS */
- 0xe0 0xc74164de /* SGMII_CTRL */
- 0xe4 0x0006a545 /* MAC_PWR_SEL */
- >;
- };
-};
-
-&gmac1 {
- status = "okay";
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
- mdiobus = <&mdio0>;
- nvmem-cells = <&macaddr_factory_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
- mdiobus = <&mdio0>;
- nvmem-cells = <&macaddr_factory_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&factory {
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_factory_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_factory_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- macaddr_PRODUCTDATA_c: macaddr@c {
- reg = <0xc 0x6>;
- };
-
- macaddr_PRODUCTDATA_12: macaddr@12 {
- reg = <0x12 0x6>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-
-#include "qcom-ipq8064.dtsi"
-
-/ {
- model = "Qualcomm IPQ8062";
- compatible = "qcom,ipq8062", "qcom,ipq8064";
-
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-};
-
-&gsbi4 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- serial@16340000 {
- status = "okay";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
-};
-
-&opp_table0 {
- /delete-node/opp-1200000000;
- /delete-node/opp-1400000000;
-
- /*
- * Voltage thresholds are <target min max>
- */
- opp-384000000 {
- opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
- opp-microvolt-speed0-pvs1-v0 = < 925000 878750 971250>;
- opp-microvolt-speed0-pvs2-v0 = < 875000 831250 918750>;
- opp-microvolt-speed0-pvs3-v0 = < 800000 760000 840000>;
- };
-
- opp-600000000 {
- opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
- opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>;
- opp-microvolt-speed0-pvs2-v0 = < 925000 878750 971250>;
- opp-microvolt-speed0-pvs3-v0 = < 850000 807500 892500>;
- };
-
- opp-800000000 {
- opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
- opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs2-v0 = < 995000 945250 1044750>;
- opp-microvolt-speed0-pvs3-v0 = < 900000 855000 945000>;
- };
-
- opp-1000000000 {
- opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>;
- opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
- opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs3-v0 = < 950000 902500 997500>;
- };
-};
-
-&pcie0 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&smb208_s2a {
- regulator-max-microvolt = <1150000>;
-};
-
-&smb208_s2b {
- regulator-max-microvolt = <1150000>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
- label-mac-device = &gmac2;
- };
-};
-
-&qcom_pinmux {
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- usb0_pwr_en_pin: usb0_pwr_en_pin {
- mux {
- pins = "gpio25";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- output-high;
- };
- };
-
- usb1_pwr_en_pin: usb1_pwr_en_pin {
- mux {
- pins = "gpio23";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- output-high;
- };
- };
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "MIBIB";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- partition@40000 {
- label = "SBL2";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "SBL3";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- partition@90000 {
- label = "DDRCONFIG";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- partition@a0000 {
- label = "SSD";
- reg = <0xa0000 0x10000>;
- read-only;
- };
-
- partition@b0000 {
- label = "TZ";
- reg = <0xb0000 0x30000>;
- read-only;
- };
-
- partition@e0000 {
- label = "RPM";
- reg = <0xe0000 0x20000>;
- read-only;
- };
-
- partition@100000 {
- label = "fs-uboot";
- reg = <0x100000 0x70000>;
- read-only;
- };
-
- partition@170000 {
- label = "uboot-env";
- reg = <0x170000 0x40000>;
- read-only;
- };
-
- partition@1b0000 {
- label = "radio";
- reg = <0x1b0000 0x40000>;
- read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_radio_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_radio_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- partition@1f0000 {
- label = "os-image";
- reg = <0x1f0000 0x400000>;
- };
-
- partition@5f0000 {
- label = "rootfs";
- reg = <0x5f0000 0x1900000>;
- };
-
- defaultmac: partition@1ef0000 {
- label = "default-mac";
- reg = <0x1ef0000 0x00200>;
- read-only;
- };
-
- partition@1ef0200 {
- label = "pin";
- reg = <0x1ef0200 0x00200>;
- read-only;
- };
-
- partition@1ef0400 {
- label = "product-info";
- reg = <0x1ef0400 0x0fc00>;
- read-only;
- };
-
- partition@1f00000 {
- label = "partition-table";
- reg = <0x1f00000 0x10000>;
- read-only;
- };
-
- partition@1f10000 {
- label = "soft-version";
- reg = <0x1f10000 0x10000>;
- read-only;
- };
-
- partition@1f20000 {
- label = "support-list";
- reg = <0x1f20000 0x10000>;
- read-only;
- };
-
- partition@1f30000 {
- label = "profile";
- reg = <0x1f30000 0x10000>;
- read-only;
- };
-
- partition@1f40000 {
- label = "default-config";
- reg = <0x1f40000 0x10000>;
- read-only;
- };
-
- partition@1f50000 {
- label = "user-config";
- reg = <0x1f50000 0x40000>;
- read-only;
- };
-
- partition@1f90000 {
- label = "qos-db";
- reg = <0x1f90000 0x40000>;
- read-only;
- };
-
- partition@1fd0000 {
- label = "usb-config";
- reg = <0x1fd0000 0x10000>;
- read-only;
- };
-
- partition@1fe0000 {
- label = "log";
- reg = <0x1fe0000 0x20000>;
- read-only;
- };
- };
- };
- };
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb0_pwr_en_pin>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-
- pinctrl-0 = <&usb1_pwr_en_pin>;
- pinctrl-names = "default";
-};
-
-&pcie0 {
- status = "okay";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <(-1)>;
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_defaultmac_8>, <&precal_radio_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- nvmem-cells = <&macaddr_defaultmac_8>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- nvmem-cells = <&macaddr_defaultmac_8>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&defaultmac {
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_defaultmac_8: macaddr@8 {
- reg = <0x8 0x6>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-ad7200-c2600.dtsi"
-
-/ {
- model = "TP-Link Talon AD7200";
- compatible = "tplink,ad7200", "qcom,ipq8064";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- led_enable {
- label = "led-enable";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_LIGHTS_TOGGLE>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- lan {
- label = "blue:lan";
- gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>;
- };
-
- usb1 {
- label = "blue:usb1";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g {
- label = "blue:wlan5g";
- gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
- };
-
- usb3 {
- label = "blue:usb3";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "blue:wlan2g";
- gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
- };
-
- wan_orange {
- label = "orange:wan";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- wan_blue {
- label = "blue:wan";
- gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "blue:wps";
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
- };
-
- wlan60g {
- label = "blue:wlan60g";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
- };
-
- led_status: status {
- label = "blue:status";
- gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio53", "gpio54", "gpio67";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26",
- "gpio33", "gpio55", "gpio56", "gpio66";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-};
-
-&pcie2 {
- status = "okay";
- max-link-speed = <1>;
-};
+++ /dev/null
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
- model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&flash {
- partitions {
- compatible = "qcom,smem-part";
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
- max-link-speed = <1>;
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
+++ /dev/null
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
- model = "Qualcomm IPQ8064/AP161";
- compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
- };
-};
-
-&qcom_pinmux {
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29",
- "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59",
- "gpio60", "gpio61", "gpio62",
- "gpio2", "gpio66";
- };
- };
-};
-
-&flash {
- partitions {
- compatible = "qcom,smem-part";
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
- max-link-speed = <1>;
-};
-
-&pcie2 {
- status = "okay";
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x20080 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- qca,phy-rgmii-en;
- qca,txclk-delay-en;
- qca,rxclk-delay-en;
- };
-
- phy3: ethernet-phy@3 {
- device_type = "ethernet-phy";
- reg = <3>;
- };
-};
-
-&gmac0 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <0>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
- mdiobus = <&mdio0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <1>;
- mdiobus = <&mdio0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
- mdiobus = <&mdio0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
+++ /dev/null
-#include "qcom-ipq8064-ad7200-c2600.dtsi"
-
-/ {
- model = "TP-Link Archer C2600";
- compatible = "tplink,c2600", "qcom,ipq8064";
-
- aliases {
- led-boot = &power;
- led-failsafe = &general;
- led-running = &power;
- led-upgrade = &general;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- ledswitch {
- label = "ledswitch";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_LIGHTS_TOGGLE>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- lan {
- label = "white:lan";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
- };
-
- usb4 {
- label = "white:usb_4";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "white:usb_2";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "white:wps";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan_amber {
- label = "amber:wan";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- wan_white {
- label = "white:wan";
- gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
- };
-
- power: power {
- label = "white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- general: general {
- label = "white:general";
- gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio16", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
- "gpio53", "gpio66";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-};
+++ /dev/null
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear Nighthawk X4 D7800";
- compatible = "netgear,d7800", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- rsvd@5fe00000 {
- reg = <0x5fe00000 0x200000>;
- reusable;
- };
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
-
- led-boot = &power_white;
- led-failsafe = &power_amber;
- led-running = &power_white;
- led-upgrade = &power_amber;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb1 {
- label = "white:usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "white:usb2";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- power_amber: power_amber {
- label = "amber:power";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan_white {
- label = "white:wan";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wan_amber {
- label = "amber:wan";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "white:wps";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- esata {
- label = "white:esata";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- power_white: power_white {
- label = "white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- wifi {
- label = "white:wifi";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
- "gpio24","gpio26", "gpio53", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- usb0_pwr_en_pins: usb0_pwr_en_pins {
- mux {
- pins = "gpio15";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio16", "gpio68";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-};
-
-&sata_phy {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb0_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-
- pinctrl-0 = <&usb1_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&pcie0 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <(1)>;
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <(2)>;
- };
- };
-};
-
-&pcie2 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie2_pins>;
- pinctrl-names = "default";
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- nand-is-boot-medium;
- qcom,boot_pages_size = <0x1180000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- qcadata@0 {
- label = "qcadata";
- reg = <0x0000000 0x0c80000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- read-only;
- };
-
- art@1200000 {
- label = "art";
- reg = <0x1200000 0x0140000>;
- read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_art_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_art_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- artbak: art@1340000 {
- label = "artbak";
- reg = <0x1340000 0x0140000>;
- read-only;
- };
-
- kernel@1480000 {
- label = "kernel";
- reg = <0x1480000 0x0400000>;
- };
-
- ubi@1880000 {
- label = "ubi";
- reg = <0x1880000 0x6080000>;
- };
-
- reserve@7900000 {
- label = "reserve";
- reg = <0x7900000 0x0700000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- nvmem-cells = <&macaddr_art_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- nvmem-cells = <&macaddr_art_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
+++ /dev/null
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
- model = "Qualcomm IPQ8064/DB149";
- compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
-
- aliases {
- serial0 = &gsbi2_serial;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-};
-
-&qcom_pinmux {
- rgmii0_pins: rgmii0_pins {
- mux {
- pins = "gpio2", "gpio66";
- drive-strength = <8>;
- bias-disable;
- };
- };
-};
-
-&gsbi2 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- gsbi2_serial: serial@12490000 {
- status = "okay";
- };
-};
-
-&gsbi4 {
- status = "disabled";
-};
-
-&gsbi4_serial {
- status = "disabled";
-};
-
-&flash {
- m25p,fast-read;
-
- partition@0 {
- label = "lowlevel_init";
- reg = <0x0 0x1b0000>;
- };
-
- partition@1 {
- label = "u-boot";
- reg = <0x1b0000 0x80000>;
- };
-
- partition@2 {
- label = "u-boot-env";
- reg = <0x230000 0x40000>;
- };
-
- partition@3 {
- label = "caldata";
- reg = <0x270000 0x40000>;
- };
-
- partition@4 {
- label = "firmware";
- reg = <0x2b0000 0x1d50000>;
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&pcie2 {
- status = "okay";
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-
- phy6: ethernet-phy@6 {
- reg = <6>;
- };
-
- phy7: ethernet-phy@7 {
- reg = <7>;
- };
-};
-
-&gmac0 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <0>;
- phy-handle = <&phy4>;
-
- pinctrl-0 = <&rgmii0_pins>;
- pinctrl-names = "default";
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
- phy-handle = <&phy6>;
-};
-
-&gmac3 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <3>;
- phy-handle = <&phy7>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-eax500.dtsi"
-
-/ {
- model = "Linksys EA7500 V1 WiFi Router";
- compatible = "linksys,ea7500-v1", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0xe000000>;
- device_type = "memory";
- };
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- /* look for root deviceblock nbr in this bootarg */
- find-rootblock = "ubi.mtd=";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_power: power {
- label = "white:power";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio65", "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio6";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-};
-
-&partitions {
- partition@5f80000 {
- label = "sysdiag";
- reg = <0x5f80000 0x100000>;
- };
-
- partition@6080000 {
- label = "syscfg";
- reg = <0x6080000 0x1f80000>;
- };
-};
+++ /dev/null
-#include "qcom-ipq8064-eax500.dtsi"
-
-/ {
- model = "Linksys EA8500 WiFi Router";
- compatible = "linksys,ea8500", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
-
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- wps {
- label = "green:wps";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
-
- led_power: power {
- label = "white:power";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- wifi {
- label = "green:wifi";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio65", "gpio67", "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio6", "gpio53", "gpio54";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-};
-
-&sata_phy {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&partitions {
- partition@5f80000 {
- label = "syscfg";
- reg = <0x5f80000 0x2080000>;
- };
-};
-
-&mdio0 {
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,rgmii_delay = <0>;
- qcom,emulation = <0>;
-};
-
-/* LAN */
-&gmac2 {
- qcom,phy_mdio_addr = <0>; /* none */
- qcom,poll_required = <0>; /* no polling */
- qcom,rgmii_delay = <0>;
- qcom,emulation = <0>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- chosen {
- bootargs = "console=ttyMSM0,115200n8";
- /* append to bootargs adding the root deviceblock nbr from bootloader */
- append-rootblock = "ubi.mtd=";
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- max-link-speed = <1>;
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&pcie2 {
- status = "okay";
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- nand-is-boot-medium;
- qcom,boot_pages_size = <0x0c80000>;
-
- partitions: partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- partition@40000 {
- label = "MIBIB";
- reg = <0x0040000 0x0140000>;
- read-only;
- };
-
- partition@180000 {
- label = "SBL2";
- reg = <0x0180000 0x0140000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "SBL3";
- reg = <0x02c0000 0x0280000>;
- read-only;
- };
-
- partition@540000 {
- label = "DDRCONFIG";
- reg = <0x0540000 0x0120000>;
- read-only;
- };
-
- partition@660000 {
- label = "SSD";
- reg = <0x0660000 0x0120000>;
- read-only;
- };
-
- partition@780000 {
- label = "TZ";
- reg = <0x0780000 0x0280000>;
- read-only;
- };
-
- partition@a00000 {
- label = "RPM";
- reg = <0x0a00000 0x0280000>;
- read-only;
- };
-
- art: partition@c80000 {
- label = "art";
- reg = <0x0c80000 0x0140000>;
- read-only;
- };
-
- partition@dc0000 {
- label = "APPSBL";
- reg = <0x0dc0000 0x0100000>;
- read-only;
- };
-
- partition@ec0000 {
- label = "u_env";
- reg = <0x0ec0000 0x0040000>;
- };
-
- partition@f00000 {
- label = "s_env";
- reg = <0x0f00000 0x0040000>;
- };
-
- partition@f40000 {
- label = "devinfo";
- reg = <0x0f40000 0x0040000>;
- };
-
- partition@f80000 {
- label = "kernel1";
- reg = <0x0f80000 0x2800000>; /* 4 MB, spill to rootfs */
- };
-
- partition@1380000 {
- label = "rootfs1";
- reg = <0x1380000 0x2400000>;
- };
-
- partition@3780000 {
- label = "kernel2";
- reg = <0x3780000 0x2800000>;
- };
-
- partition@3b80000 {
- label = "rootfs2";
- reg = <0x3b80000 0x2400000>;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x00010 0x2613a0 /* PWS_REG */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-};
-
-&gmac1 {
- status = "okay";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- compatible = "asrock,g10", "qcom,ipq8064";
- model = "ASRock G10";
-
- aliases {
- ethernet0 = &gmac1;
- ethernet1 = &gmac0;
-
- led-boot = &led_status_blue;
- led-failsafe = &led_status_amber;
- led-running = &led_status_blue;
- led-upgrade = &led_status_amber;
- };
-
- chosen {
- bootargs-override = "console=ttyMSM0,115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- /*
- * this is a bit misleading. Because there are about seven
- * multicolor LEDs connected all wired together in parallel.
- */
-
- status_yellow {
- label = "yellow:status";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_amber: status_amber {
- label = "amber:status";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_blue: status_blue {
- label = "blue:status";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- /*
- * LED is declared in vendors boardfile but it's not
- * working and the manual doesn't mention anything
- * about the LED being white.
-
- status_white {
- label = "white:status";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
- */
- };
-
- i2c-gpio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "i2c-gpio";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
- <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
- i2c-gpio,delay-us = <5>;
- i2c-gpio,scl-output-only;
-
- mcu@50 {
- reg = <0x50>;
- compatible = "sonix,sn8f25e21";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- ir-remote {
- label = "ir-remote";
- gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps5g {
- label = "wps5g";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps2g {
- label = "wps2g";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&gmac1 {
- status = "okay";
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi4_serial {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- nand-is-boot-medium;
- qcom,boot_pages_size = <0x1200000>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi5g: wifi@1,0 {
- reg = <0x00010000 0 0 0 0>;
- compatible = "qcom,ath10k";
- qcom,ath10k-calibration-variant = "ASRock-G10";
- };
- };
-};
-
-&pcie1 {
- status = "okay";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2g: wifi@1,0 {
- reg = <0x00010000 0 0 0 0>;
- compatible = "qcom,ath10k";
- qcom,ath10k-calibration-variant = "ASRock-G10";
- };
- };
-};
-
-&qcom_pinmux {
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio26";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio15", "gpio16", "gpio64", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- uart0_pins: uart0_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gsbi4";
- drive-strength = <10>;
- bias-disable;
- };
- };
-};
-
-&rpm {
- pinctrl-0 = <&i2c4_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&tcsr {
- qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-};
-
-/delete-node/ &pcie2_pins;
-/delete-node/ &pcie2;
+++ /dev/null
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Netgear Nighthawk X4 R7500";
- compatible = "netgear,r7500", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0xe000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
-
- led-boot = &power_white;
- led-failsafe = &power_amber;
- led-running = &power_white;
- led-upgrade = &power_amber;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb1 {
- label = "white:usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "white:usb2";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- power_amber: power_amber {
- label = "amber:power";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan_white {
- label = "white:wan";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wan_amber {
- label = "amber:wan";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "white:wps";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- esata {
- label = "white:esata";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- power_white: power_white {
- label = "white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- wifi {
- label = "white:wifi";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
- "gpio24","gpio26", "gpio53", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-};
-
-&gsbi5 {
- status = "disabled";
-
- spi@1a280000 {
- status = "disabled";
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
- max-link-speed = <1>;
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- nand-is-boot-medium;
- qcom,boot_pages_size = <0x1180000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- qcadata@0 {
- label = "qcadata";
- reg = <0x0000000 0x0c80000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- read-only;
- };
-
- art: art@1200000 {
- label = "art";
- reg = <0x1200000 0x0140000>;
- read-only;
- };
-
- kernel@1340000 {
- label = "kernel";
- reg = <0x1340000 0x0400000>;
- };
-
- ubi@1740000 {
- label = "ubi";
- reg = <0x1740000 0x1600000>;
- };
-
- netgear@2d40000 {
- label = "netgear";
- reg = <0x2d40000 0x0c00000>;
- read-only;
- };
-
- reserve@3940000 {
- label = "reserve";
- reg = <0x3940000 0x46c0000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- nvmem-cells = <&macaddr_art_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- nvmem-cells = <&macaddr_art_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&tcsr {
- qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
- compatible = "qcom,tcsr";
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&art {
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_art_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_art_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-};
+++ /dev/null
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear Nighthawk X4 R7500v2";
- compatible = "netgear,r7500v2", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- rsvd@5fe00000 {
- reg = <0x5fe00000 0x200000>;
- reusable;
- };
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
-
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb1 {
- label = "amber:usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb3 {
- label = "amber:usb3";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- status {
- label = "amber:status";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- internet {
- label = "white:internet";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "white:wan";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "white:wps";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- esata {
- label = "white:esata";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- wifi {
- label = "white:wifi";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
- "gpio24","gpio26", "gpio53", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- usb0_pwr_en_pins: usb0_pwr_en_pins {
- mux {
- pins = "gpio15";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio16", "gpio68";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-};
-
-&sata_phy {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb0_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-
- pinctrl-0 = <&usb1_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&pcie0 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <(1)>;
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <(2)>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- nand-is-boot-medium;
- qcom,boot_pages_size = <0x1180000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- qcadata@0 {
- label = "qcadata";
- reg = <0x0000000 0x0c80000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- read-only;
- };
-
- art@1200000 {
- label = "art";
- reg = <0x1200000 0x0140000>;
- read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_art_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_art_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- artbak: art@1340000 {
- label = "artbak";
- reg = <0x1340000 0x0140000>;
- read-only;
- };
-
- kernel@1480000 {
- label = "kernel";
- reg = <0x1480000 0x0400000>;
- };
-
- ubi@1880000 {
- label = "ubi";
- reg = <0x1880000 0x6080000>;
- };
-
- reserve@7900000 {
- label = "reserve";
- reg = <0x7900000 0x0700000>;
- read-only;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0xaa545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- nvmem-cells = <&macaddr_art_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- nvmem-cells = <&macaddr_art_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Ubiquiti UniFi AC HD";
- compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064";
-
- aliases {
- label-mac-device = &gmac2;
- led-boot = &led_dome_white;
- led-failsafe = &led_dome_white;
- led-running = &led_dome_blue;
- led-upgrade = &led_dome_blue;
- mdio-gpio0 = &mdio0;
- ethernet0 = &gmac2;
- ethernet1 = &gmac1;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_dome_blue: dome_blue {
- label = "blue:dome";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- led_dome_white: dome_white {
- label = "white:dome";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio9", "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- output-low;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <12>;
- };
- };
-};
-
-&CPU_SPC {
- status = "disabled";
-};
-
-&gsbi5 {
- status = "okay";
-
- qcom,mode = <GSBI_PROT_SPI>;
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
- cs-gpios = <&qcom_pinmux 20 0>;
-
- flash@0 {
- compatible = "mx25u25635f", "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "MIBIB";
- reg = <0x20000 0x10000>;
- read-only;
- };
-
- partition@30000 {
- label = "SBL2";
- reg = <0x30000 0x20000>;
- read-only;
- };
-
- partition@50000 {
- label = "SBL3";
- reg = <0x50000 0x30000>;
- read-only;
- };
-
- partition@80000 {
- label = "DDRCONFIG";
- reg = <0x80000 0x10000>;
- read-only;
- };
-
- partition@90000 {
- label = "SSD";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- partition@a0000 {
- label = "TZ";
- reg = <0xa0000 0x30000>;
- read-only;
- };
-
- partition@d0000 {
- label = "RPM";
- reg = <0xd0000 0x20000>;
- read-only;
- };
-
- partition@f0000 {
- label = "APPSBL";
- reg = <0xf0000 0xc0000>;
- read-only;
- };
-
- partition@1b0000 {
- label = "APPSBLENV";
- reg = <0x1b0000 0x10000>;
- read-only;
- };
-
- eeprom: partition@1c0000 {
- label = "EEPROM";
- reg = <0x1c0000 0x10000>;
- read-only;
- };
-
- partition@1d0000 {
- label = "bootselect";
- reg = <0x1d0000 0x10000>;
- };
-
- partition@1e0000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x1e0000 0xe70000>;
- };
-
- partition@1050000 {
- label = "kernel1";
- reg = <0x1050000 0xe70000>;
- read-only;
- };
-
- partition@1ec0000 {
- label = "debug";
- reg = <0x1ec0000 0x100000>;
- read-only;
- };
-
- partition@1fc0000 {
- label = "cfg";
- reg = <0x1fc0000 0x40000>;
- read-only;
- };
- };
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- };
-};
-
-&gmac1 {
- status = "okay";
-
- mdiobus = <&mdio0>;
- phy-handle = <&phy5>;
- phy-mode = "sgmii";
- qcom,id = <1>;
-
- nvmem-cells = <&macaddr_eeprom_6>;
- nvmem-cell-names = "mac-address";
-};
-
-&gmac2 {
- status = "okay";
-
- mdiobus = <&mdio0>;
- phy-handle = <&phy4>;
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- nvmem-cells = <&macaddr_eeprom_0>;
- nvmem-cell-names = "mac-address";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&tcsr {
- status = "okay";
-};
-
-&hs_phy_0 {
- status = "okay";
-};
-
-&ss_phy_0 {
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&hs_phy_1 {
- status = "okay";
-};
-
-&ss_phy_1 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&eeprom {
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_eeprom_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_eeprom_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-};
+++ /dev/null
-#include "qcom-ipq8064.dtsi"
-
-/ {
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-};
-
-&gsbi4 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- serial@16340000 {
- status = "okay";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
-};
-
-&CPU_SPC {
- status = "okay";
-};
-
-&pcie0 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&sata {
- ports-implemented = <0x1>;
-};
-
-&ss_phy_0 {
- qcom,rx-eq = <2>;
- qcom,tx-deamp_3_5db = <32>;
- qcom,mpll = <5>;
-};
-
-&ss_phy_1 {
- qcom,rx-eq = <2>;
- qcom,tx-deamp_3_5db = <32>;
- qcom,mpll = <5>;
-};
+++ /dev/null
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "TP-Link Archer VR2600v";
- compatible = "tplink,vr2600v", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
-
- led-boot = &power;
- led-failsafe = &general;
- led-running = &power;
- led-upgrade = &general;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- dect {
- label = "dect";
- gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- ledswitch {
- label = "ledswitch";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_LIGHTS_TOGGLE>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- dsl {
- label = "white:dsl";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "white:usb";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- lan {
- label = "white:lan";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "white:wlan2g";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g {
- label = "white:wlan5g";
- gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "white:power";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- phone {
- label = "white:phone";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "white:wan";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
- };
-
- general: general {
- label = "white:general";
- gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
- "gpio26", "gpio53", "gpio56", "gpio66";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi4: spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- partition@20000 {
- label = "MIBIB";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- partition@40000 {
- label = "SBL2";
- reg = <0x40000 0x40000>;
- read-only;
- };
-
- partition@80000 {
- label = "SBL3";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "DDRCONFIG";
- reg = <0x100000 0x10000>;
- read-only;
- };
-
- partition@110000 {
- label = "SSD";
- reg = <0x110000 0x10000>;
- read-only;
- };
-
- partition@120000 {
- label = "TZ";
- reg = <0x120000 0x80000>;
- read-only;
- };
-
- partition@1a0000 {
- label = "RPM";
- reg = <0x1a0000 0x80000>;
- read-only;
- };
-
- partition@220000 {
- label = "APPSBL";
- reg = <0x220000 0x80000>;
- read-only;
- };
-
- partition@2a0000 {
- label = "APPSBLENV";
- reg = <0x2a0000 0x40000>;
- read-only;
- };
-
- partition@2e0000 {
- label = "OLDART";
- reg = <0x2e0000 0x40000>;
- read-only;
- };
-
- partition@320000 {
- label = "firmware";
- reg = <0x320000 0xc60000>;
- compatible = "openwrt,uimage";
- openwrt,offset = <512>; /* account for pad-extra 512 */
- };
-
- /* hole 0xf80000 - 0xfaf100 */
-
- partition@faf100 {
- label = "default-mac";
- reg = <0xfaf100 0x00200>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_defaultmac_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
- };
-
- partition@fc0000 {
- label = "ART";
- reg = <0xfc0000 0x40000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_ART_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_ART_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
- };
- };
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <(-1)>;
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_defaultmac_0>, <&precal_ART_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- nvmem-cells = <&macaddr_defaultmac_0>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- nvmem-cells = <&macaddr_defaultmac_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
+++ /dev/null
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "NEC Aterm WG2600HP";
- compatible = "nec,wg2600hp", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
-
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- bridge {
- label = "bridge";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- converter {
- label = "converter";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- converter_green {
- label = "green:converter";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
- };
-
- power_red: power_red {
- label = "red:power";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- active_green {
- label = "green:active";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- active_red {
- label = "red:active";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- power_green: power_green {
- label = "green:power";
- gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
- };
-
- converter_red {
- label = "red:converter";
- gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_green {
- label = "green:wlan2g";
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_red {
- label = "red:wlan2g";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_green {
- label = "green:wlan5g";
- gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_red {
- label = "red:wlan5g";
- gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
- };
-
- tv_green {
- label = "green:tv";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
-
- tv_red {
- label = "red:tv";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&CPU_SPC {
- status = "disabled";
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x06000000 /* PAD0_MODE */
- 0x0000c 0x00080080 /* PAD6_MODE */
- 0x000e4 0x0006a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x0000004e /* PORT0_STATUS */
- 0x00094 0x0000004e /* PORT6_STATUS */
- >;
- };
-
- ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- nvmem-cells = <&macaddr_PRODUCTDATA_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- nvmem-cells = <&macaddr_PRODUCTDATA_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi5 {
- status = "okay";
-
- qcom,mode = <GSBI_PROT_SPI>;
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- MIBIB@20000 {
- label = "MIBIB";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- SBL2@40000 {
- label = "SBL2";
- reg = <0x40000 0x40000>;
- read-only;
- };
-
- SBL3@80000 {
- label = "SBL3";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- DDRCONFIG@100000 {
- label = "DDRCONFIG";
- reg = <0x100000 0x10000>;
- read-only;
- };
-
- SSD@110000 {
- label = "SSD";
- reg = <0x110000 0x10000>;
- read-only;
- };
-
- TZ@120000 {
- label = "TZ";
- reg = <0x120000 0x80000>;
- read-only;
- };
-
- RPM@1a0000 {
- label = "RPM";
- reg = <0x1a0000 0x80000>;
- read-only;
- };
-
- APPSBL@220000 {
- label = "APPSBL";
- reg = <0x220000 0x80000>;
- read-only;
- };
-
- APPSBLENV@2a0000 {
- label = "APPSBLENV";
- reg = <0x2a0000 0x10000>;
- };
-
- PRODUCTDATA: PRODUCTDATA@2b0000 {
- label = "PRODUCTDATA";
- reg = <0x2b0000 0x30000>;
- read-only;
- };
-
- ART@2e0000 {
- label = "ART";
- reg = <0x2e0000 0x40000>;
- read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_ART_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_ART_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- TP@320000 {
- label = "TP";
- reg = <0x320000 0x40000>;
- read-only;
- };
-
- TINY@360000 {
- label = "TINY";
- reg = <0x360000 0x500000>;
- read-only;
- };
-
- firmware@860000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x860000 0x17a0000>;
- };
- };
- };
- };
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio16", "gpio54", "gpio24", "gpio25";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
- "gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
- "gpio64", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- usb_pwr_en_pins: usb_pwr_en_pins {
- mux {
- pins = "gpio22";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- output-high;
- };
- };
-};
-
-&PRODUCTDATA {
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_PRODUCTDATA_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_PRODUCTDATA_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- macaddr_PRODUCTDATA_c: macaddr@c {
- reg = <0xc 0x6>;
- };
-
- macaddr_PRODUCTDATA_12: macaddr@12 {
- reg = <0x12 0x6>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: BSD-3-Clause
-/*
- * Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
- * Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
- * All rights reserved.
- */
-
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- compatible = "compex,wpq864", "qcom,ipq8064";
- model = "Compex WPQ864";
-
- aliases {
- mdio-gpio0 = &mdio0;
- ethernet0 = &gmac1;
- ethernet1 = &gmac0;
-
- led-boot = &led_pass;
- led-failsafe = &led_fail;
- led-running = &led_pass;
- led-upgrade = &led_pass;
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- rss4 {
- label = "green:rss4";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- rss3 {
- label = "green:rss3";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- rss2 {
- label = "orange:rss2";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
- };
-
- rss1 {
- label = "red:rss1";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- led_pass: pass {
- label = "green:pass";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
-
- led_fail: fail {
- label = "green:fail";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "green:usb";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb-pcie {
- label = "green:usb-pcie";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- beeper {
- compatible = "gpio-beeper";
-
- pinctrl-0 = <&beeper_pins>;
- pinctrl-names = "default";
-
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&rpm {
- pinctrl-0 = <&rpm_pins>;
- pinctrl-names = "default";
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- mt29f2g08abbeah4@0 {
- compatible = "qcom,nandcs";
-
- reg = <0>;
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- nand-is-boot-medium;
- qcom,boot_pages_size = <0x1180000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- MIBIB@40000 {
- label = "MIBIB";
- reg = <0x0040000 0x0140000>;
- read-only;
- };
-
- SBL2@180000 {
- label = "SBL2";
- reg = <0x0180000 0x0140000>;
- read-only;
- };
-
- SBL3@2c0000 {
- label = "SBL3";
- reg = <0x02c0000 0x0280000>;
- read-only;
- };
-
- DDRCONFIG@540000 {
- label = "DDRCONFIG";
- reg = <0x0540000 0x0120000>;
- read-only;
- };
-
- SSD@660000 {
- label = "SSD";
- reg = <0x0660000 0x0120000>;
- read-only;
- };
-
- TZ@780000 {
- label = "TZ";
- reg = <0x0780000 0x0280000>;
- read-only;
- };
-
- RPM@a00000 {
- label = "RPM";
- reg = <0x0a00000 0x0280000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- };
-
- ART@1200000 {
- label = "ART";
- reg = <0x1200000 0x0140000>;
- };
-
- ubi@1340000 {
- label = "ubi";
- reg = <0x1340000 0x4000000>;
- };
-
- BOOTCONFIG@5340000 {
- label = "BOOTCONFIG";
- reg = <0x5340000 0x0060000>;
- };
-
- SBL2-1@53a0000- {
- label = "SBL2_1";
- reg = <0x53a0000 0x0140000>;
- read-only;
- };
-
- SBL3-1@54e0000 {
- label = "SBL3_1";
- reg = <0x54e0000 0x0280000>;
- read-only;
- };
-
- DDRCONFIG-1@5760000 {
- label = "DDRCONFIG_1";
- reg = <0x5760000 0x0120000>;
- read-only;
- };
-
- SSD-1@5880000 {
- label = "SSD_1";
- reg = <0x5880000 0x0120000>;
- read-only;
- };
-
- TZ-1@59a0000 {
- label = "TZ_1";
- reg = <0x59a0000 0x0280000>;
- read-only;
- };
-
- RPM-1@5c20000 {
- label = "RPM_1";
- reg = <0x5c20000 0x0280000>;
- read-only;
- };
-
- BOOTCONFIG1@5ea0000 {
- label = "BOOTCONFIG1";
- reg = <0x5ea0000 0x0060000>;
- };
-
- APPSBL-1@5f00000 {
- label = "APPSBL_1";
- reg = <0x5f00000 0x0500000>;
- read-only;
- };
-
- ubi-1@6400000 {
- label = "ubi_1";
- reg = <0x6400000 0x4000000>;
- };
-
- unused@a400000 {
- label = "unused";
- reg = <0xa400000 0x5c00000>;
- };
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi4_serial {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&flash {
- compatible = "jedec,spi-nor";
-};
-
-&sata_phy {
- status = "disabled";
-};
-
-&sata {
- status = "disabled";
-};
-
-&ss_phy_0 { /* USB3 port 0 SS phy */
- status = "okay";
-
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <160>;
-};
-
-&ss_phy_1 { /* USB3 port 1 SS phy */
- status = "okay";
-
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <160>;
-};
-
-&pcie0 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&pcie2 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-};
-
-&qcom_pinmux {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinctrl0 {
- pcie0_pcie2_perst {
- pins = "gpio3";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio22",
- "gpio23", "gpio24", "gpio25", "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio54";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- beeper_pins: beeper_pins {
- mux {
- pins = "gpio55";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- rpm_pins: rpm_pins {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <10>;
- bias-disable;
- };
- };
-
- uart0_pins: uart0_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gsbi4";
- drive-strength = <10>;
- bias-disable;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19";
- function = "gsbi5";
- drive-strength = <10>;
- bias-pull-down;
- };
-
- clk {
- pins = "gpio21";
- function = "gsbi5";
- drive-strength = <12>;
- bias-pull-down;
- };
-
- cs {
- pins = "gpio20";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&tcsr {
- qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Buffalo WXR-2533DHP";
- compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
-
- memory@42000000 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &diag;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- /* use "ubi_rootfs" volume in "ubi" partition as rootfs */
- bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb {
- label = "green:usb";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port0 &hub_port1>;
- };
-
- guestport {
- label = "green:guestport";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- diag: diag {
- label = "orange:diag";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- internet_orange {
- label = "orange:internet";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
- };
-
- internet_white {
- label = "white:internet";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wireless_orange {
- label = "orange:wireless";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wireless_white {
- label = "white:wireless";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- router_orange {
- label = "orange:router";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
- };
-
- router_white {
- label = "white:router";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- power: power {
- label = "white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- power {
- label = "power";
- gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- eject {
- label = "eject";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_EJECTCD>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- guest {
- label = "guest";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- ap {
- label = "ap";
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- router {
- label = "router";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- auto {
- label = "auto";
- gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- ubi@0 {
- label = "ubi";
- reg = <0x0000000 0x4000000>;
- };
-
- rootfs_1@4000000 {
- label = "rootfs_1";
- reg = <0x4000000 0x4000000>;
- };
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x07600000 /* PAD0_MODE */
- 0x00008 0x01000000 /* PAD5_MODE */
- 0x0000c 0x00000080 /* PAD6_MODE */
- 0x00050 0xcc35cc35 /* LED_CTRL0 */
- 0x00054 0xca35ca35 /* LED_CTRL1 */
- 0x00058 0xc935c935 /* LED_CTRL2 */
- 0x0005c 0x03ffff00 /* LED_CTRL3 */
- 0x000e4 0x0006a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x0000007e /* PORT0_STATUS */
- 0x00094 0x0000007e /* PORT6_STATUS */
- >;
- };
-
- ethernet-phy@4 {
- reg = <4>;
- };
-};
-
-&gmac1 {
- status = "okay";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- nvmem-cells = <&macaddr_ART_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- nvmem-cells = <&macaddr_ART_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi4_serial {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&gsbi5 {
- status = "okay";
- qcom,mode = <GSBI_PROT_SPI>;
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- MIBIB@10000 {
- label = "MIBIB";
- reg = <0x10000 0x20000>;
- read-only;
- };
-
- SBL2@30000 {
- label = "SBL2";
- reg = <0x30000 0x30000>;
- read-only;
- };
-
- SBL3@60000 {
- label = "SBL3";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- DDRCONFIG@90000 {
- label = "DDRCONFIG";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- SSD@a0000 {
- label = "SSD";
- reg = <0xa0000 0x10000>;
- read-only;
- };
-
- TZ@b0000 {
- label = "TZ";
- reg = <0xb0000 0x30000>;
- read-only;
- };
-
- RPM@e0000 {
- label = "RPM";
- reg = <0xe0000 0x20000>;
- read-only;
- };
-
- APPSBL@100000 {
- label = "APPSBL";
- reg = <0x100000 0x70000>;
- read-only;
- };
-
- APPSBLENV@170000 {
- label = "APPSBLENV";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- ART@180000 {
- label = "ART";
- reg = <0x180000 0x40000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_ART_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_ART_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- macaddr_ART_18: macaddr@18 {
- reg = <0x18 0x6>;
- };
-
- macaddr_ART_1e: macaddr@1e {
- reg = <0x1e 0x6>;
- };
-
- precal_ART_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_ART_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- BOOTCONFIG@1c0000 {
- label = "BOOTCONFIG";
- reg = <0x1c0000 0x10000>;
- read-only;
- };
-
- APPSBL_1@1d0000 {
- label = "APPSBL_1";
- reg = <0x1d0000 0x70000>;
- read-only;
- };
- };
- };
- };
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&dwc3_0 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&dwc3_1 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_ART_1e>, <&precal_ART_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&macaddr_ART_18>, <&precal_ART_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
- "gpio58", "gpio64", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
- "gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- uart0_pins: uart0_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs{
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- usb_pwr_en_pins: usb_pwr_en_pins {
- mux{
- pins = "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- output-high;
- };
- };
-};
+++ /dev/null
-#include "qcom-ipq8065.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "ZyXEL NBG6817";
- compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- aliases {
- mdio-gpio0 = &mdio0;
- sdcc1 = &sdcc1;
-
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1";
- append-rootblock = "root=/dev/mmcblk0p";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- internet {
- label = "white:internet";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "white:power";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- wifi2g {
- label = "amber:wifi2g";
- gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
- };
-
- /* wifi2g amber from the manual is missing */
-
- wifi5g {
- label = "amber:wifi5g";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- /* wifi5g amber from the manual is missing */
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio53", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio9", "gpio26", "gpio33", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- mdio0_pins: mdio0_pins {
- clk {
- pins = "gpio1";
- input-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- tx {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
- input-disable;
- };
- };
-
- spi_pins: spi_pins {
- cs {
- pins = "gpio20";
- drive-strength = <12>;
- };
- };
-
- usb0_pwr_en_pins: usb0_pwr_en_pins {
- mux {
- pins = "gpio16", "gpio17";
- function = "gpio";
- drive-strength = <12>;
- };
-
- pwr {
- pins = "gpio17";
- bias-pull-down;
- output-high;
- };
-
- ovc {
- pins = "gpio16";
- bias-pull-up;
- };
- };
-
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio14", "gpio15";
- function = "gpio";
- drive-strength = <12>;
- };
-
- pwr {
- pins = "gpio14";
- bias-pull-down;
- output-high;
- };
-
- ovc {
- pins = "gpio15";
- bias-pull-up;
- };
- };
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi4: spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <51200000>;
- reg = <0>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
- };
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb0_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-
- pinctrl-0 = <&usb1_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&pcie0 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-};
-
-&pcie1 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- max-link-speed = <1>;
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0xaa545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
- 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
- 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
- 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
- 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
- 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
- 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
- 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
- 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
- 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
- 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
- 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
- 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
- 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- qca,ar8327-initvals = <
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x0000c 0x80 /* PAD6_MODE */
- >;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <1>;
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <0>;
- qcom,rgmii_delay = <1>;
- qcom,phy_mii_type = <0>;
- qcom,emulation = <0>;
- qcom,irq = <255>;
- mdiobus = <&mdio0>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <2>;
- qcom,phy_mdio_addr = <0>; /* none */
- qcom,poll_required = <0>; /* no polling */
- qcom,rgmii_delay = <0>;
- qcom,phy_mii_type = <1>;
- qcom,emulation = <0>;
- qcom,irq = <258>;
- mdiobus = <&mdio0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&amba {
- sdcc1: sdcc@12400000 {
- status = "okay";
- };
-};
-
-&adm_dma {
- status = "okay";
-};
+++ /dev/null
-#include "qcom-ipq8065.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- rsvd@5fe00000 {
- reg = <0x5fe00000 0x200000>;
- reusable;
- };
-
- ramoops@42100000 {
- compatible = "ramoops";
- reg = <0x42100000 0x40000>;
- record-size = <0x4000>;
- console-size = <0x4000>;
- ftrace-size = <0x4000>;
- pmsg-size = <0x4000>;
- };
- };
-
- aliases {
- label-mac-device = &gmac2;
-
- led-boot = &power_white;
- led-failsafe = &power_amber;
- led-running = &power_white;
- led-upgrade = &power_amber;
-
- mdio-gpio0 = &mdio0;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds: leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- power_white: power_white {
- label = "white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- power_amber: power_amber {
- label = "amber:power";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan_white {
- label = "white:wan";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wan_amber {
- label = "amber:wan";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wifi {
- label = "white:wifi";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "white:wps";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9",
- "gpio22", "gpio23", "gpio24",
- "gpio26", "gpio53", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- mdio0_pins: mdio0_pins {
- clk {
- pins = "gpio1";
- input-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- tx {
- pins = "gpio27", "gpio28", "gpio29",
- "gpio30", "gpio31", "gpio32";
- input-disable;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- spi6_pins: spi6_pins {
- mux {
- pins = "gpio55", "gpio56", "gpio58";
- function = "gsbi6";
- bias-pull-down;
- };
-
- mosi {
- pins = "gpio55";
- drive-strength = <12>;
- };
-
- miso {
- pins = "gpio56";
- drive-strength = <14>;
- };
-
- cs {
- pins = "gpio57";
- drive-strength = <12>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio58";
- drive-strength = <12>;
- };
-
- reset {
- pins = "gpio33";
- drive-strength = <10>;
- bias-pull-down;
- output-high;
- };
- };
-
- usb0_pwr_en_pins: usb0_pwr_en_pins {
- mux {
- pins = "gpio15";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio16", "gpio68";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- nand-is-boot-medium;
- qcom,boot_pages_size = <0x1180000>;
-
- partitions: partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "qcadata";
- reg = <0x0000000 0x0c80000>;
- read-only;
- };
-
- partition@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- partition@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- read-only;
- };
-
- art: partition@1200000 {
- label = "art";
- reg = <0x1200000 0x0140000>;
- read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_art_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_art_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- partition@1340000 {
- label = "artbak";
- reg = <0x1340000 0x0140000>;
- read-only;
- };
-
- partition@1480000 {
- label = "kernel";
- reg = <0x1480000 0x0400000>;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0xaa545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
- 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
- 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
- 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
- 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
- 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
- 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
- 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
- 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
- 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
- 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
- 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
- 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
- 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
- >;
- qca,ar8327-vlans = <
- 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
- 0x2 0x21 /* VLAN2 Ports 0/5 */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- qca,ar8327-initvals = <
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x0000c 0x80 /* PAD6_MODE */
- >;
- };
-};
-
-&gmac1 {
- status = "okay";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <0>;
- qcom,rgmii_delay = <1>;
- qcom,phy_mii_type = <0>;
- qcom,emulation = <0>;
- qcom,irq = <255>;
- mdiobus = <&mdio0>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- nvmem-cells = <&macaddr_art_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
- qcom,phy_mdio_addr = <0>; /* none */
- qcom,poll_required = <0>; /* no polling */
- qcom,rgmii_delay = <0>;
- qcom,phy_mii_type = <1>;
- qcom,emulation = <0>;
- qcom,irq = <258>;
- mdiobus = <&mdio0>;
-
- nvmem-cells = <&macaddr_art_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&sata_phy {
- status = "okay";
-};
-
-&sata {
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb0_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-
- pinctrl-0 = <&usb1_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&pcie0 {
- status = "okay";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi0: wifi@1,0 {
- compatible = "pci168c,0046";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-&pcie1 {
- status = "okay";
-
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi1: wifi@1,0 {
- compatible = "pci168c,0046";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
+++ /dev/null
-#include "qcom-ipq8065-nighthawk.dtsi"
-
-/ {
- model = "Netgear Nighthawk X4S R7800";
- compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
-};
-
-&leds {
- usb1 {
- label = "white:usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "white:usb2";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- esata {
- label = "white:esata";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&partitions {
- partition@1880000 {
- label = "ubi";
- reg = <0x1880000 0x6080000>;
- };
-
- partition@7900000 {
- label = "reserve";
- reg = <0x7900000 0x0700000>;
- read-only;
- };
-};
-
-&wifi0 {
- nvmem-cells = <&macaddr_art_6>, <&precal_art_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <(1)>;
-};
-
-&wifi1 {
- nvmem-cells = <&macaddr_art_6>, <&precal_art_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
- mac-address-increment = <(2)>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq8065.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Askey RT4230W REV6";
- compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x3e000000>;
- device_type = "memory";
- };
-
- aliases {
- led-boot = &ledctrl3;
- led-failsafe = &ledctrl1;
- led-running = &ledctrl2;
- led-upgrade = &ledctrl3;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- ledctrl1: ledctrl1 {
- label = "ledctrl1";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- ledctrl2: ledctrl2 {
- label = "ledctrl2";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- ledctrl3: ledctrl3 {
- label = "ledctrl3";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio54", "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio22", "gpio23", "gpio24";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62";
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
-
- tx {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
- input-disable;
- };
- };
-
- spi_pins: spi_pins {
- cs {
- pins = "gpio20";
- drive-strength = <12>;
- };
- };
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "everspin,mr25h256";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <40000000>;
- reg = <0>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x0040000 0x0140000>;
- read-only;
- };
-
- partition@180000 {
- label = "0:SBL2";
- reg = <0x0180000 0x0140000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "0:SBL3";
- reg = <0x02c0000 0x0280000>;
- read-only;
- };
-
- partition@540000 {
- label = "0:DDRCONFIG";
- reg = <0x0540000 0x0120000>;
- read-only;
- };
-
- partition@660000 {
- label = "0:SSD";
- reg = <0x0660000 0x0120000>;
- read-only;
- };
-
- partition@780000 {
- label = "0:TZ";
- reg = <0x0780000 0x0280000>;
- read-only;
- };
-
- partition@a00000 {
- label = "0:RPM";
- reg = <0x0a00000 0x0280000>;
- read-only;
- };
-
- partition@c80000 {
- label = "0:APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- partition@1180000 {
- label = "0:APPSBLENV";
- reg = <0x1180000 0x0080000>;
- };
-
- partition@1200000 {
- label = "0:ART";
- reg = <0x1200000 0x0140000>;
- read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_ART_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_ART_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- precal_ART_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_ART_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
-
- partition@1340000 {
- label = "0:BOOTCONFIG";
- reg = <0x1340000 0x0060000>;
- read-only;
- };
-
- partition@13a0000 {
- label = "0:SBL2_1";
- reg = <0x13a0000 0x0140000>;
- read-only;
- };
-
- partition@14e0000 {
- label = "0:SBL3_1";
- reg = <0x14e0000 0x0280000>;
- read-only;
- };
-
- partition@1760000 {
- label = "0:DDRCONFIG_1";
- reg = <0x1760000 0x0120000>;
- read-only;
- };
-
- partition@1880000 {
- label = "0:SSD_1";
- reg = <0x1880000 0x0120000>;
- read-only;
- };
-
- partition@19a0000 {
- label = "0:TZ_1";
- reg = <0x19a0000 0x0280000>;
- read-only;
- };
-
- partition@1c20000 {
- label = "0:RPM_1";
- reg = <0x1c20000 0x0280000>;
- read-only;
- };
-
- partition@1ea0000 {
- label = "0:BOOTCONFIG1";
- reg = <0x1ea0000 0x0060000>;
- read-only;
- };
-
- partition@1f00000 {
- label = "0:APPSBL_1";
- reg = <0x1f00000 0x0500000>;
- read-only;
- };
-
- partition@2400000 {
- label = "ubi";
- reg = <0x2400000 0x1a000000>;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0x0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0xaa545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- 0x00050 0xcf02cf02 /* LED_CTRL_0 */
- 0x00054 0xc832c832 /* LED_CTRL_1 */
- >;
- };
-};
-
-&gmac0 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <0>;
-
- nvmem-cells = <&macaddr_ART_0>;
- nvmem-cell-names = "mac-address";
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <1>;
-
- nvmem-cells = <&macaddr_ART_6>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi0: wifi@1,0 {
- compatible = "pci168c,0046";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&precal_ART_1000>;
- nvmem-cell-names = "pre-calibration";
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi1: wifi@1,0 {
- compatible = "pci168c,0046";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&precal_ART_5000>;
- nvmem-cell-names = "pre-calibration";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq8065.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Arris TR4400 v2";
- compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- aliases {
- led-boot = &led_status_blue;
- led-failsafe = &led_status_red;
- led-running = &led_status_blue;
- led-upgrade = &led_status_red;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_status_red: status_red {
- label = "red:status";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- led_status_blue: status_blue {
- label = "blue:status";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- tx {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
- input-disable;
- };
- };
-
- spi_pins: spi_pins {
- cs {
- pins = "gpio20";
- drive-strength = <12>;
- };
- };
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "everspin,mr25h256";
- spi-max-frequency = <40000000>;
- reg = <0>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x0040000 0x0140000>;
- read-only;
- };
- partition@180000 {
- label = "0:SBL2";
- reg = <0x0180000 0x0140000>;
- read-only;
- };
- partition@2c0000 {
- label = "0:SBL3";
- reg = <0x02c0000 0x0280000>;
- read-only;
- };
- partition@540000 {
- label = "0:DDRCONFIG";
- reg = <0x0540000 0x0120000>;
- read-only;
- };
- partition@660000 {
- label = "0:SSD";
- reg = <0x0660000 0x0120000>;
- read-only;
- };
- partition@780000 {
- label = "0:TZ";
- reg = <0x0780000 0x0280000>;
- read-only;
- };
- partition@a00000 {
- label = "0:RPM";
- reg = <0x0a00000 0x0280000>;
- read-only;
- };
- partition@c80000 {
- label = "0:APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
- partition@1180000 {
- label = "0:APPSBLENV";
- reg = <0x1180000 0x0080000>;
- };
- partition@1200000 {
- label = "0:ART";
- reg = <0x1200000 0x0140000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_ART_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
- precal_ART_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
- };
- stock_partition@1340000 {
- label = "stock_rootfs";
- reg = <0x1340000 0x4000000>;
- };
- partition@5340000 {
- label = "0:BOOTCONFIG";
- reg = <0x5340000 0x0060000>;
- read-only;
- };
- partition@53a0000 {
- label = "0:SBL2_1";
- reg = <0x53a0000 0x0140000>;
- read-only;
- };
- partition@54e0000 {
- label = "0:SBL3_1";
- reg = <0x54e0000 0x0280000>;
- read-only;
- };
- partition@5760000 {
- label = "0:DDRCONFIG_1";
- reg = <0x5760000 0x0120000>;
- read-only;
- };
- partition@5880000 {
- label = "0:SSD_1";
- reg = <0x5880000 0x0120000>;
- read-only;
- };
- partition@59a0000 {
- label = "0:TZ_1";
- reg = <0x59a0000 0x0280000>;
- read-only;
- };
- partition@5c20000 {
- label = "0:RPM_1";
- reg = <0x5c20000 0x0280000>;
- read-only;
- };
- partition@5ea0000 {
- label = "0:BOOTCONFIG1";
- reg = <0x5ea0000 0x0060000>;
- read-only;
- };
- partition@5f00000 {
- label = "0:APPSBL_1";
- reg = <0x5f00000 0x0500000>;
- read-only;
- };
- stock_partition@6400000 {
- label = "stock_rootfs_1";
- reg = <0x6400000 0x4000000>;
- };
- stock_partition@a400000 {
- label = "stock_fw_env";
- reg = <0xa400000 0x0100000>;
- };
- stock_partition@a500000 {
- label = "stock_config";
- reg = <0xa500000 0x0800000>;
- };
- stock_partition@ad00000 {
- label = "stock_PKI";
- reg = <0xad00000 0x0200000>;
- };
- stock_partition@af00000 {
- label = "stock_scfgmgr";
- reg = <0xaf00000 0x0100000>;
- };
-
- partition@6400000 {
- label = "fw_env";
- reg = <0x6400000 0x0100000>;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_fw_env_0: macaddr@0 {
- reg = <0x00 0x6>;
- };
- macaddr_fw_env_6: macaddr@6 {
- reg = <0x06 0x6>;
- };
- macaddr_fw_env_c: macaddr@c {
- reg = <0x0c 0x6>;
- };
- macaddr_fw_env_12: macaddr@12 {
- reg = <0x12 0x6>;
- };
- macaddr_fw_env_18: macaddr@18 {
- reg = <0x18 0x6>;
- };
- };
- partition@6500000 {
- label = "ubi";
- reg = <0x6500000 0x9b00000>;
- };
- partition@1340000 {
- label = "extra";
- reg = <0x1340000 0x4000000>;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0x0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0xaa545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy7: ethernet-phy@7 {
- reg = <7>;
- };
-};
-
-&gmac0 {
- status = "okay";
- phy-mode = "rgmii";
- qcom,id = <0>;
-
- nvmem-cells = <&macaddr_fw_env_18>;
- nvmem-cell-names = "mac-address";
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac1 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <1>;
-
- nvmem-cells = <&macaddr_fw_env_0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac3 {
- status = "okay";
- phy-mode = "sgmii";
- qcom,id = <3>;
- phy-handle = <&phy7>;
-
- nvmem-cells = <&macaddr_fw_env_6>;
- nvmem-cell-names = "mac-address";
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi0: wifi@1,0 {
- compatible = "pci168c,0046";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>;
- nvmem-cell-names = "pre-calibration", "mac-address";
- };
- };
-};
-
-&pcie1 {
- status = "okay";
- reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- max-link-speed = <1>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi1: wifi@1,0 {
- compatible = "pci168c,0040";
- reg = <0x00010000 0 0 0 0>;
-
- nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>;
- nvmem-cell-names = "pre-calibration", "mac-address";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8065-nighthawk.dtsi"
-
-/ {
- model = "Netgear Nighthawk XR500";
- compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064";
-
-};
-
-&leds {
- usb1 {
- label = "white:usb1";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "white:usb2";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&partitions {
- partition@1880000 {
- label = "ubi";
- reg = <0x1880000 0xce00000>;
- };
-
- partition@e680000 {
- label = "reserve";
- reg = <0xe680000 0x0780000>;
- read-only;
- };
-};
-
-&wifi0 {
- nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
-};
-
-&wifi1 {
- nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
- nvmem-cell-names = "mac-address", "pre-calibration";
-};
-
-&art {
- macaddr_art_c: macaddr@c {
- reg = <0xc 0x6>;
- };
-};
+++ /dev/null
-#include "qcom-ipq8064.dtsi"
-
-/ {
- model = "Qualcomm IPQ8065";
- compatible = "qcom,ipq8065", "qcom,ipq8064";
-
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-};
-
-&gsbi4 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- serial@16340000 {
- status = "okay";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
-};
-
-&pcie0 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie1 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&pcie2 {
- compatible = "qcom,pcie-ipq8064-v2";
-};
-
-&sata {
- ports-implemented = <0x1>;
-};
-
-&smb208_s2a {
- regulator-min-microvolt = <775000>;
- regulator-max-microvolt = <1275000>;
-};
-
-&smb208_s2b {
- regulator-min-microvolt = <775000>;
- regulator-max-microvolt = <1275000>;
-};
-
-&ss_phy_0 {
- qcom,rx-eq = <2>;
- qcom,tx-deamp_3_5db = <32>;
- qcom,mpll = <5>;
-};
-
-&ss_phy_1 {
- qcom,rx-eq = <2>;
- qcom,tx-deamp_3_5db = <32>;
- qcom,mpll = <5>;
-};
-
-&opp_table_l2 {
- /delete-node/opp-1200000000;
-
- opp-1400000000 {
- opp-hz = /bits/ 64 <1400000000>;
- opp-microvolt = <1150000>;
- clock-latency-ns = <100000>;
- opp-level = <2>;
- };
-};
-
-&opp_table0 {
- /*
- * On ipq8065 1.2 ghz freq is not present
- * Remove it to make cpufreq work and not
- * complain for missing definition
- */
-
- /delete-node/opp-1200000000;
-
- /*
- * Voltage thresholds are <target min max>
- */
- opp-384000000 {
- opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>;
- opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>;
- opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>;
- opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>;
- opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>;
- opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>;
- opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>;
- };
-
- opp-600000000 {
- opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>;
- opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>;
- opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>;
- opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>;
- opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>;
- opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>;
- opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>;
- };
-
- opp-800000000 {
- opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>;
- opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>;
- opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>;
- opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>;
- opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>;
- opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>;
- };
-
- opp-1000000000 {
- opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>;
- opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>;
- opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>;
- opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>;
- opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>;
- opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>;
- };
-
- opp-1400000000 {
- opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>;
- opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>;
- opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>;
- opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>;
- opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>;
- opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>;
- opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>;
- opp-level = <1>;
- };
-
- opp-1725000000 {
- opp-hz = /bits/ 64 <1725000000>;
- opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>;
- opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>;
- opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>;
- opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>;
- opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>;
- opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>;
- opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>;
- opp-supported-hw = <0x1>;
- clock-latency-ns = <100000>;
- opp-level = <2>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-/ {
- memory {
- device_type = "memory";
- linux,usable-memory = <0x41500000 0x1ea00000>;
- reg = <0x40000000 0x20000000>;
- };
-
- cpus {
- idle-states {
- CPU_SPC: spc {
- status = "disabled";
- };
- };
- };
-
- chosen {
- bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art";
- };
-};
-
-&qcom_pinmux {
- mdio0_pins_active: mdio0_pins_active {
- mux {
- pins = "gpio0", "gpio1";
- function = "mdio";
- drive-strength = <2>;
- bias-pull-down;
- output-low;
- };
-
- clk {
- pins = "gpio1";
- input-disable;
- };
- };
-
- phy_active: phy_active {
- phy {
- pins = "gpio6", "gpio7";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- output-high;
- };
- };
-
- uart1_pins: uart1_pins {
- mux {
- pins = "gpio51", "gpio52";
- function = "gsbi1";
- drive-strength = <4>;
- bias-disable;
- };
- };
-};
-
-&gsbi1 {
- status = "okay";
- qcom,mode = <GSBI_PROT_UART_W_FC>;
-
- serial@12450000 {
- status = "okay";
-
- pinctrl-0 = <&uart1_pins>;
- pinctrl-names = "default";
- };
-};
-
-&pcie0 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-
- bridge@0,0 {
- reg = <0x0 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi0: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x10000 0 0 0 0>;
- };
- };
-};
-
-&pcie1 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-
- bridge@0,0 {
- reg = <0x0 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi1: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x10000 0 0 0 0>;
- };
- };
-};
-
-&pcie2 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-
- bridge@0,0 {
- reg = <0x0 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x10000 0 0 0 0>;
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- compatible = "qcom,nandcs";
-
- reg = <0>;
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- nand-is-boot-medium;
- qcom,boot_pages_size = <0x2140000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "mibib";
- reg = <0x40000 0x140000>;
- read-only;
- };
-
- partition@180000 {
- label = "sbl2";
- reg = <0x180000 0x140000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "sbl3";
- reg = <0x2c0000 0x280000>;
- read-only;
- };
-
- partition@540000 {
- label = "ddrconfig";
- reg = <0x540000 0x120000>;
- read-only;
- };
-
- partition@660000 {
- label = "ssd";
- reg = <0x660000 0x120000>;
- read-only;
- };
-
- partition@780000 {
- label = "tz";
- reg = <0x780000 0x280000>;
- read-only;
- };
-
- partition@a00000 {
- label = "rpm";
- reg = <0xa00000 0x280000>;
- read-only;
- };
-
- partition@1fc0000 {
- label = "u-boot";
- reg = <0x1fc0000 0x180000>;
- read-only;
- };
-
- partition@21c0000 {
- label = "bootkernel1";
- reg = <0x21c0000 0xa80000>;
- };
-
- partition@2c40000 {
- label = "bootkernel2";
- reg = <0x2c40000 0xa80000>;
- };
-
- partition@36c0000 {
- label = "ubi";
- reg = <0x36c0000 0x46c0000>;
- };
-
- partition@7d80000 {
- label = "art";
- reg = <0x7d80000 0x200000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Edgecore ECW5410";
- compatible = "edgecore,ecw5410", "qcom,ipq8064";
-
- reserved-memory {
- nss@40000000 {
- reg = <0x40000000 0x1000000>;
- no-map;
- };
-
- smem: smem@41000000 {
- reg = <0x41000000 0x200000>;
- no-map;
- };
-
- wifi_dump@44000000 {
- reg = <0x44000000 0x600000>;
- no-map;
- };
- };
-
- cpus {
- idle-states {
- CPU_SPC: spc {
- status = "disabled";
- };
- };
- };
-
- aliases {
- serial1 = &gsbi1_serial;
- ethernet0 = &gmac2;
- ethernet1 = &gmac3;
-
- led-boot = &led_power_green;
- led-failsafe = &led_power_red;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- chosen {
- bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_power_green: power_green {
- label = "green:power";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_green {
- label = "green:wlan2g";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g_yellow {
- label = "yellow:wlan2g";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g_green {
- label = "green:wlan5g";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- led_power_red: power_red {
- label = "red:power";
- gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
- };
-
- wlan5g_yellow {
- label = "yellow:wlan5g";
- gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-
-&qcom_pinmux {
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19";
- function = "gsbi5";
- drive-strength = <10>;
- bias-pull-down;
- };
-
- clk {
- pins = "gpio21";
- function = "gsbi5";
- drive-strength = <12>;
- bias-pull-down;
- };
-
- cs {
- pins = "gpio20";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio16", "gpio23", "gpio24", "gpio26",
- "gpio28", "gpio59";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio25";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- uart1_pins: uart1_pins {
- mux {
- pins = "gpio51", "gpio52", "gpio53", "gpio54";
- function = "gsbi1";
- drive-strength = <12>;
- bias-none;
- };
- };
-};
-
-&gsbi1 {
- qcom,mode = <GSBI_PROT_UART_W_FC>;
- status = "okay";
-
- serial@12450000 {
- status = "okay";
-
- pinctrl-0 = <&uart1_pins>;
- pinctrl-names = "default";
- };
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi4: spi@1a280000 {
- status = "okay";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
- };
-};
-
-&hs_phy_0 { /* USB3 port 0 HS phy */
- status = "okay";
-};
-
-&hs_phy_1 { /* USB3 port 1 HS phy */
- status = "okay";
-};
-
-&ss_phy_0 { /* USB3 port 0 SS phy */
- status = "okay";
-};
-
-&ss_phy_1 { /* USB3 port 1 SS phy */
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
- };
- };
-};
-
-&pcie2 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L";
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- compatible = "qcom,nandcs";
-
- reg = <0>;
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- rootfs1@0 {
- label = "rootfs1";
- reg = <0x0000000 0x4000000>;
- };
-
- rootfs2@4000000 {
- label = "rootfs2";
- reg = <0x4000000 0x4000000>;
- };
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- qcom,id = <2>;
- mdiobus = <&mdio0>;
-
- phy-mode = "sgmii";
- phy-handle = <&phy1>;
-};
-
-&gmac3 {
- status = "okay";
-
- qcom,id = <3>;
- mdiobus = <&mdio0>;
-
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
-};
-
-&adm_dma {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq8068-cryptid-common.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Meraki MR42";
- compatible = "meraki,mr42", "qcom,ipq8064";
-
- aliases {
- serial1 = &gsbi1_serial;
- ethernet0 = &gmac3;
-
- led-boot = &led_active;
- led-failsafe = &led_power;
- led-running = &led_active;
- led-upgrade = &led_active;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_power: power {
- label = "orange:power";
- gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
- };
-
- led_active: active {
- label = "white:active";
- gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gmac3 {
- status = "okay";
-
- qcom,id = <3>;
- mdiobus = <&mdio0>;
-
- phy-mode = "sgmii";
- phy-handle = <&phy2>;
-
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
-};
-
-&gsbi2 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
-};
-
-&gsbi2_i2c {
- status = "okay";
-
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- ina2xx@40 {
- compatible = "ina219";
- shunt-resistor = <40000>;
- reg = <0x40>;
- };
-
- eeprom@56 {
- compatible = "atmel,24c64";
- pagesize = <32>;
- reg = <0x56>;
- read-only;
- #address-cells = <1>;
- #size-cells = <1>;
-
- mac_address: mac-address@66 {
- reg = <0x66 0x6>;
- };
- };
-};
-
-&gsbi6 {
- qcom,mode = <GSBI_PROT_I2C>;
- status = "okay";
-};
-
-&gsbi6_i2c {
- status = "okay";
-
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
-
- tlc591xx@40 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "ti,tlc59108";
- reg = <0x40>;
-
- red@0 {
- label = "red:user";
- reg = <0x0>;
- };
-
- green@1 {
- label = "green:user";
- reg = <0x1>;
- };
-
- blue@2 {
- label = "blue:user";
- reg = <0x2>;
- };
- };
-};
-
-&mdio0 {
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
- pinctrl-names = "default";
-
- phy2: ethernet-phy2 {
- reg = <2>;
-
- reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- reset-assert-us = <24000>;
-
- eee-broken-100tx;
- eee-broken-1000t;
- };
-};
-
-&qcom_pinmux {
- i2c0_pins: i2c0_pins {
- mux {
- pins = "gpio24", "gpio25";
- function = "gsbi2";
- drive-strength = <2>;
- bias-pull-up;
- input;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio26";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c1_pins: i2c1_pins {
- mux {
- pins = "gpio29", "gpio30";
- function = "gsbi6";
- drive-strength = <2>;
- bias-pull-up;
- input;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio31", "gpio32";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-low;
- };
- };
-};
-
-&wifi0 {
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <1>;
-};
-
-&wifi1 {
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <2>;
-};
-
-&wifi2 {
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <3>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq8068-cryptid-common.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Meraki MR52";
- compatible = "meraki,mr52", "qcom,ipq8064";
-
- aliases {
- serial1 = &gsbi1_serial;
- mdio-gpio0 = &mdio_gpio0;
- ethernet0 = &gmac2;
- ethernet1 = &gmac3;
-
- led-boot = &led_active;
- led-failsafe = &led_power;
- led-running = &led_active;
- led-upgrade = &led_active;
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_power: power {
- label = "orange:power";
- gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>;
- };
-
- lan2_green {
- label = "green:lan2";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- lan1_green {
- label = "green:lan1";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- led_active: active {
- label = "white:active";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- lan2_orange {
- label = "orange:lan2";
- gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>;
- };
-
- lan1_orange {
- label = "orange:lan1";
- gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&gmac2 {
- status = "okay";
-
- qcom,id = <2>;
- mdiobus = <&mdio0>;
-
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
-
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
-};
-
-&gmac3 {
- status = "okay";
-
- qcom,id = <3>;
- mdiobus = <&mdio_gpio0>;
-
- phy-mode = "sgmii";
- phy-handle = <&phy4>;
-
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <1>;
-};
-
-&gsbi7 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
-};
-
-&gsbi7_i2c {
- status = "okay";
-
- pinctrl-0 = <&i2c_pins>;
- pinctrl-names = "default";
-
- ina2xx@45 {
- compatible = "ina219";
- shunt-resistor = <80000>;
- reg = <0x45>;
- };
-
- tlc591xx@49 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "ti,tlc59108";
- reg = <0x49>;
-
- red@0 {
- label = "red:user";
- reg = <0x0>;
- };
-
- green@1 {
- label = "green:user";
- reg = <0x1>;
- };
-
- blue@2 {
- label = "blue:user";
- reg = <0x2>;
- };
- };
-
- eeprom@52 {
- compatible = "atmel,24c64";
- pagesize = <32>;
- reg = <0x52>;
- read-only;
- #address-cells = <1>;
- #size-cells = <1>;
-
- mac_address: mac-address@66 {
- reg = <0x66 0x6>;
- };
- };
-};
-
-&qcom_pinmux {
- i2c_pins: i2c_pins {
- mux {
- pins = "gpio8", "gpio9";
- function = "gsbi7";
- drive-strength = <2>;
- bias-pull-up;
- input;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio19", "gpio26";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-low;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio25";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- input;
- };
- };
-};
-
-&soc {
- mdio_gpio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
- pinctrl-names = "default";
-
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH
- &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-
- phy0: ethernet-phy0 {
- reg = <0>;
- reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>;
- reset-assert-us = <24000>;
- };
-
- phy4: ethernet-phy4 {
- reg = <4>;
- reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- reset-assert-us = <24000>;
- };
- };
-};
-
-&wifi0 {
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <4>;
-};
-
-&wifi1 {
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <3>;
-};
-
-&wifi2 {
- nvmem-cells = <&mac_address>;
- nvmem-cell-names = "mac-address";
- mac-address-increment = <2>;
-};
projects / openwrt / staging / hauke.git / commitdiff