Pull ARM Renesas SoC cleanup, refactoring and more SMP support from Kevin Hilman:
"Lots of cleanup and refactoring and some SMP additions for Renesas
platforms. Due to some inter-dependencies with other arm-soc
branches, this Renesas stuff was separated out for sending after the
other branches were merged.
Highlights:
- remove unused board support and cleanup of unused headers
- refactoring of init and device registration
- simplify IRQ initialization"
* tag 'renesas-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
ARM: shmobile: Per-CPU SMP boot / sleep code for SCU SoCs
ARM: shmobile: Introduce per-CPU SMP boot / sleep code
ARM: shmobile: Use shared SCU CPU Hotplug code on r8a7779
ARM: shmobile: Use shared SCU CPU Hotplug code on sh73a0
ARM: shmobile: Add shared SCU CPU Hotplug code
ARM: shmobile: Use shared SCU SMP boot code on emev2
ARM: shmobile: Use shared SCU SMP boot code on r8a7779
ARM: shmobile: Use shared SCU SMP boot code on sh73a0
ARM: shmobile: Introduce shared SCU SMP boot code
ARM: shmobile: sh73a0: Remove global GPIO_NR definition
ARM: shmobile: kzm9d: remove nfsroot settings from bootargs
ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs
ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup
ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup
ARM: shmobile: bockw: add missing __initdata
ARM: shmobile: r8a7790: add missing __initdata
ARM: shmobile: r8a7779: add missing __initdata
ARM: shmobile: Remove unused shmobile_init_time()
ARM: shmobile: Use clocksource_of_init() on r8a7790
ARM: shmobile: Use default ->init_time() on KZM9G DT ref
...
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb \
r8a73a4-ape6evm.dtb \
+ r8a73a4-ape6evm-reference.dtb \
sh7372-mackerel.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
0 73 0x4>;
};
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a7740";
+ reg = <0xe6050000 0x8000>,
+ <0xe605800c 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
++
+ tpu: pwm@e6600000 {
+ compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+ reg = <0xe6600000 0x100>;
+ status = "disabled";
+ #pwm-cells = <3>;
+ };
};
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select RENESAS_INTC_IRQPIN
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
+ config MACH_BOCKW_REFERENCE
+ bool "BOCK-W - Reference Device Tree Implementation"
+ depends on ARCH_R8A7778
+ select ARCH_REQUIRE_GPIOLIB
+ select RENESAS_INTC_IRQPIN
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select USE_OF
+ ---help---
+ Use reference implementation of BockW board support
+ which makes use of device tree at the expense
+ of not supporting a number of devices.
+
+ This is intended to aid developers
+
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
# Makefile for the linux kernel.
#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include
+
# Common objects
-obj-y := timer.o console.o clock.o
+obj-y := timer.o console.o
# CPU objects
-obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
-obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o
-obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
+obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
- obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o intc-r8a7740.o
++obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
- obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o intc-r8a7779.o
++obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
+obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
+
+# Clock objects
+ifndef CONFIG_COMMON_CLK
+obj-y += clock.o
+obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o
+obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
+obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
+obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o
+endif
# SMP objects
smp-y := platsmp.o headsmp.o
r8a7778_clock_init();
r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices();
- r8a7778_add_usb_phy_device(&usb_phy_platform_data);
r8a7778_add_ether_device(ðer_platform_data);
- r8a7778_add_i2c_device(0);
- r8a7778_add_hspi_device(0);
- r8a7778_add_mmc_device(&sh_mmcif_plat);
+ r8a7778_add_vin_device(0, &vin_platform_data);
+ /* VIN1 has a pin conflict with Ether */
+ if (!IS_ENABLED(CONFIG_SH_ETH))
+ r8a7778_add_vin_device(1, &vin_platform_data);
+ platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
+ &iclink0_ml86v7667,
+ sizeof(iclink0_ml86v7667));
+ platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
+ &iclink1_ml86v7667,
+ sizeof(iclink1_ml86v7667));
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
- #include <mach/hardware.h>
+#include <media/soc_camera.h>
#include <mach/r8a7779.h>
#include <mach/common.h>
#include <mach/irqs.h>
&thermal_device,
&hspi_device,
&leds_device,
+ &usb_phy,
+ &camera0_device,
+ &camera1_device,
};
static const struct pinctrl_map marzen_pinctrl_map[] = {
r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
r8a7779_add_standard_devices();
- r8a7779_add_usb_phy_device(&usb_phy_platform_data);
+ r8a7779_add_vin_device(1, &vin_platform_data);
+ r8a7779_add_vin_device(3, &vin_platform_data);
platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
}
#ifndef __ASM_R8A7778_H__
#define __ASM_R8A7778_H__
- #include <linux/mmc/sh_mmcif.h>
- #include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/sh_eth.h>
- #include <linux/platform_data/usb-rcar-phy.h>
+#include <linux/platform_data/camera-rcar.h>
extern void r8a7778_add_standard_devices(void);
extern void r8a7778_add_standard_devices_dt(void);
extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
- extern void r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
- extern void r8a7778_add_i2c_device(int id);
- extern void r8a7778_add_hspi_device(int id);
- extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info);
+extern void r8a7778_add_vin_device(int id,
+ struct rcar_vin_platform_data *pdata);
+ extern void r8a7778_add_dt_devices(void);
extern void r8a7778_init_late(void);
extern void r8a7778_init_delay(void);
#include <linux/sh_clk.h>
#include <linux/pm_domain.h>
#include <linux/sh_eth.h>
- #include <linux/platform_data/usb-rcar-phy.h>
+#include <linux/platform_data/camera-rcar.h>
struct platform_device;
extern void r8a7779_add_standard_devices(void);
extern void r8a7779_add_standard_devices_dt(void);
extern void r8a7779_add_ether_device(struct sh_eth_plat_data *pdata);
- extern void r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
+extern void r8a7779_add_vin_device(int idx,
+ struct rcar_vin_platform_data *pdata);
extern void r8a7779_init_late(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
hspi_resources + (2 * id), 2);
}
- /* MMC */
- static struct resource mmc_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe4e000, 0x100),
- DEFINE_RES_IRQ(gic_iid(0x5d)),
- };
-
- void __init r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info)
- {
- platform_device_register_resndata(
- &platform_bus, "sh_mmcif", -1,
- mmc_resources, ARRAY_SIZE(mmc_resources),
- info, sizeof(*info));
- }
-
+/* VIN */
+#define R8A7778_VIN(idx) \
+static struct resource vin##idx##_resources[] __initdata = { \
+ DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
+ DEFINE_RES_IRQ(gic_iid(0x5a)), \
+}; \
+ \
+static struct platform_device_info vin##idx##_info __initdata = { \
+ .parent = &platform_bus, \
+ .name = "r8a7778-vin", \
+ .id = idx, \
+ .res = vin##idx##_resources, \
+ .num_res = ARRAY_SIZE(vin##idx##_resources), \
+ .dma_mask = DMA_BIT_MASK(32), \
+}
+
+R8A7778_VIN(0);
+R8A7778_VIN(1);
+
+static struct platform_device_info *vin_info_table[] __initdata = {
+ &vin0_info,
+ &vin1_info,
+};
+
+void __init r8a7778_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
+{
+ BUG_ON(id < 0 || id > 1);
+
+ vin_info_table[id]->data = pdata;
+ vin_info_table[id]->size_data = sizeof(*pdata);
+
+ platform_device_register_full(vin_info_table[id]);
+}
+
- void __init r8a7778_add_standard_devices(void)
+ void __init r8a7778_add_dt_devices(void)
{
int i;
pdata, sizeof(*pdata));
}
- void __init r8a7779_add_usb_phy_device(struct rcar_phy_platform_data *pdata)
- {
- platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1,
- usb_phy_resources,
- ARRAY_SIZE(usb_phy_resources),
- pdata, sizeof(*pdata));
- }
-
+void __init r8a7779_add_vin_device(int id, struct rcar_vin_platform_data *pdata)
+{
+ BUG_ON(id < 0 || id > 3);
+
+ vin_info_table[id]->data = pdata;
+ vin_info_table[id]->size_data = sizeof(*pdata);
+
+ platform_device_register_full(vin_info_table[id]);
+}
+
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak r8a7779_register_twd(void) { }
projects / openwrt / staging / blogic.git / commitdiff