+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "OpenMesh A42";
- compatible = "openmesh,a42";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- red {
- label = "a42:red:status";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
-
- power: green {
- label = "a42:green:status";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- blue {
- label = "a42:blue:status";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
- };
-
- watchdog {
- compatible = "linux,wdt-gpio";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- hw_algo = "toggle";
- /* hw_margin_ms is actually 300s but driver limits it to 60s */
- hw_margin_ms = <60000>;
- always-running;
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- /* partitions are passed via bootloader */
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A42";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A42";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ALFA Network AP120C-AC";
- compatible = "alfa-network,ap120c-ac";
-
- aliases {
- led-boot = &status;
- led-failsafe = &status;
- led-running = &status;
- led-upgrade = &status;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- status: status {
- label = "ap120c-ac:blue:status";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- wan {
- label = "ap120c-ac:amber:wan";
- gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "ap120c-ac:green:wlan2g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "ap120c-ac:red:wlan5g";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- phys = <&usb3_hs_phy>;
- phy-names = "usb2-phy";
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- qca8075: ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_i2c3 {
- status = "okay";
-
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- tpm@29 {
- compatible = "atmel,at97sc3204t";
- reg = <0x29>;
- };
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- pinctrl-0 = <&spi0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
- <&tlmm 4 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition@e0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- };
-
- partition@f0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition@180000 {
- label = "priv_data1";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
-
- partition@190000 {
- label = "priv_data2";
- reg = <0x00190000 0x00010000>;
- read-only;
- };
- };
- };
-
- nand@1 {
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "rootfs1";
- reg = <0x00000000 0x04000000>;
- };
-
- partition@4000000 {
- label = "rootfs2";
- reg = <0x04000000 0x04000000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial0_pins>;
- pinctrl-names = "default";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,forced_duplex = <1>;
- qcom,forced_speed = <1000>;
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- qcom,forced_duplex = <1>;
- qcom,forced_speed = <1000>;
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&tlmm {
- i2c0_pins: i2c0_pinmux {
- mux_i2c {
- function = "blsp_i2c0";
- pins = "gpio58", "gpio59";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_mdio {
- pins = "gpio53";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_mdc {
- pins = "gpio52";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial0_pins: serial0_pinmux {
- mux_uart {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi0_pins: spi0_pinmux {
- mux_spi {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54", "gpio4";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EZVIZ CS-W3-WD1200G EUP";
- compatible = "ezviz,cs-w3-wd1200g-eup";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_blue;
- led-upgrade = &led_status_green;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- reset-delay-us = <5000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status_red: status_red {
- label = "cs-w3-wd1200g-eup:red:status";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- };
-
- led_status_green: status_green {
- label = "cs-w3-wd1200g-eup:green:status";
- gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
- };
-
- led_status_blue: status_blue {
- label = "cs-w3-wd1200g-eup:blue:status";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio53";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio52";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition5@E0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition6@F0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition7@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition9@580000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x00180000 0x00e80000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "D-Link DAP 2610";
- compatible = "dlink,dap-2610";
-
- aliases {
- led-boot = &led_red;
- led-failsafe = &led_red;
- led-running = &led_green;
- led-upgrade = &led_red;
- };
-
- soc {
- edma@c080000 {
- qcom,num_gmac = <1>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- rng@22000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x20>;
- switch_wan_bmp = <0x00>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_red: red {
- label = "dap-2610:red:power";
- gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- };
-
- led_green: green {
- label = "dap-2610:green:power";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fixed-partitions";
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- partition@180000 {
- compatible = "wrg";
- label = "firmware";
- reg = <0x180000 0xdc0000>;
- };
- partition@fb0000 {
- label = "rgbd";
- reg = <0xfb0000 0x10000>;
- read-only;
- };
- partition@fc0000 {
- label = "bdcfg";
- reg = <0xfc0000 0x10000>;
- read-only;
- };
- partition@fd0000 {
- label = "langpack";
- reg = <0xfd0000 0x20000>;
- read-only;
- };
- partition@ff0000 {
- label = "certificate";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- partition@f40000 {
- label = "captival";
- reg = <0xf40000 0x70000>;
- read-only;
- };
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x20>;
-};
-
-&mdio {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "dlink,dap-2610";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "dlink,dap-2610";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Linksys EA6350v3";
- compatible = "linksys,ea6350v3";
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: status {
- label = "EA6350v3:green:status";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-
-&blsp_dma {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
- <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- MBIB@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- QSEE@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- CDT@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- APPSBLENV@d0000 {
- label = "APPSBLENV";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- APPSBL@e0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000e0000 0x00080000>;
- read-only;
- };
- ART@160000 {
- label = "ART";
- reg = <0x00160000 0x00010000>;
- read-only;
- };
- u_env@170000 {
- label = "u_env";
- reg = <0x00170000 0x00020000>;
- };
- s_env@190000 {
- label = "s_env";
- reg = <0x00190000 0x00020000>;
- };
- devinfo@1b0000 {
- label = "devinfo";
- reg = <0x001b0000 0x00010000>;
- };
- /* 0x001c0000 - 0x00200000 unused */
- };
- };
-
- flash@1 {
- status = "okay";
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- kernel@0 {
- label = "kernel";
- reg = <0x00000000 0x02800000>;
- };
- rootfs@300000 {
- label = "rootfs";
- reg = <0x00300000 0x02500000>;
- };
- alt_kernel@2800000 {
- label = "alt_kernel";
- reg = <0x02800000 0x02800000>;
- };
- alt_rootfs@2b00000 {
- label = "alt_rootfs";
- reg = <0x02b00000 0x02500000>;
- };
- sysdiag@5000000 {
- label = "sysdiag";
- reg = <0x05000000 0x00100000>;
- };
- syscfg@5100000 {
- label = "syscfg";
- reg = <0x05100000 0x02F00000>;
- };
- /* 0x00000000 - 0x08000000: 128 MiB */
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EnGenius EAP1300";
- compatible = "engenius,eap1300";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: orange {
- label = "eap1300:orange:power";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "eap1300:blue:lan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
-
- mesh {
- label = "eap1300:blue:mesh";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "eap1300:blue:wlan2g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g {
- label = "eap1300:yellow:wlan5g";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio54", "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "0:APPSBL";
- reg = <0x000f0000 0x00090000>;
- read-only;
- };
- partition7@180000 {
- label = "0:ART";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
- partition8@190000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x190000 0x1dc0000>;
- };
- partition9@1f50000 {
- label = "u-boot-env";
- reg = <0x01f50000 0x00010000>;
- };
- partition10@1f60000 {
- label = "userconfig";
- reg = <0x01f60000 0x000a0000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EnGenius EMD1";
- compatible = "engenius,emd1";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x20>;
- switch_wan_bmp = <0x00>;
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "emd1:white:power";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "emd1:red:wlan2g";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "emd1:blue:wlan5g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- mesh {
- label = "emd1:orange:mesh";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio54", "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "0:APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition7@170000 {
- label = "0:ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition8@180000 {
- label = "userconfig";
- reg = <0x00180000 0x00080000>;
- read-only;
- };
- partition9@200000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x200000 0x01e00000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x20>;
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EMD1";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EMD1";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EnGenius ENS620EXT";
- compatible = "engenius,ens620ext";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- /*
- * Disable the broken restart as a workaround for the buggy
- * 3.0.0/3.0.1 U-boots that ship with the device.
- * Note: The watchdog is now used to restart this device.
- */
- restart@4ab000 {
- status = "disabled";
- };
- };
-
- buttons {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "ens620ext:amber:power";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "ens620ext:green:lan1";
- gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "ens620ext:green:lan2";
- gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- };
-
- wlan2G {
- label = "ens620ext:green:wlan2G";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5G {
- label = "ens620ext:green:wlan5G";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition@e0000 {
- label = "APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00090000>;
- read-only;
- };
- partition@180000 {
- label = "ART";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
- partition@190000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x00190000 0x14d0000>;
- };
- partition@1660000 {
- label = "failsafe";
- reg = <0x01660000 0x008F0000>;
- read-only;
- };
- partition@1f50000 {
- label = "u-boot-env";
- reg = <0x01f50000 0x00010000>;
- read-only;
- };
- partition@1f60000 {
- label = "userconfig";
- reg = <0x01f60000 0x000a0000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear EX6100v2";
- compatible = "netgear,ex6100v2";
-};
-
-&wifi0 {
- qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
-
-&wifi1 {
- qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear EX6150v2";
- compatible = "netgear,ex6150v2";
-};
-
-&wifi0 {
- qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
-
-&wifi1 {
- qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Netgear EX61X0v2";
- compatible = "netgear,ex61x0v2";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- aliases {
- led-boot = &power_amber;
- led-failsafe = &power_amber;
- led-running = &power_green;
- led-upgrade = &power_amber;
- label-mac-device = &gmac0;
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- num-chipselects = <0>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_amber: power_amber {
- label = "ex61x0v2:amber:power";
- gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power_green {
- label = "ex61x0v2:green:power";
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- right {
- label = "ex61x0v2:blue:right";
- gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
- };
-
- left {
- label = "ex61x0v2:blue:left";
- gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
- };
-
- client_green {
- label = "ex61x0v2:green:client";
- gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- client_red {
- label = "ex61x0v2:red:client";
- gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- router_green {
- label = "ex61x0v2:green:router";
- gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- router_red {
- label = "ex61x0v2:red:router";
- gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "ex61x0v2:green:wps";
- gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l12805d@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition5@E0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition6@F0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition7@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition8@180000 {
- label = "config";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
-
- partition9@190000 {
- label = "pot";
- reg = <0x00190000 0x00010000>;
- read-only;
- };
-
- partition10@1a0000 {
- label = "dnidata";
- reg = <0x001a0000 0x00010000>;
- read-only;
- };
-
- partition11@1b0000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x001b0000 0x00e10000>;
- };
-
- partition12@fc0000 {
- label = "language";
- reg = <0x00fc0000 0x00040000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Box 4040";
- compatible = "avm,fritzbox-4040";
-
- aliases {
- led-boot = &power;
- led-failsafe = &flash;
- led-running = &power;
- led-upgrade = &flash;
- label-mac-device = &gmac0;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- qca8075: ess-switch@c000000 {
- status = "okay";
-
- #gpio-cells = <2>;
- gpio-controller;
-
- enable-usb-power {
- gpio-hog;
- line-name = "enable USB3 power";
- gpios = <7 GPIO_ACTIVE_HIGH>;
- output-high;
- };
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- switch-leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "fritz4040:green:wlan";
- gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
- };
-
- panic: info_red {
- label = "fritz4040:red:info";
- gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- wan {
- label = "fritz4040:green:wan";
- gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "fritz4040:green:power";
- gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
- };
-
- lan {
- label = "fritz4040:green:lan";
- gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
- };
-
- flash: info_amber {
- label = "fritz4040:amber:info";
- gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- status = "okay";
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "APPSBLENV"; /* uboot env - empty */
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "urlader"; /* APPSBL */
- reg = <0x000f0000 0x0002dc000>;
- read-only;
- };
- partition7@11dc00 {
- /* make a backup of this partition! */
- label = "urlader_config";
- reg = <0x0011dc00 0x00002400>;
- read-only;
- };
- partition8@120000 {
- label = "tffs1";
- reg = <0x00120000 0x00080000>;
- read-only;
- };
- partition9@1a0000 {
- label = "tffs2";
- reg = <0x001a0000 0x00080000>;
- read-only;
- };
- partition10@220000 {
- label = "uboot";
- reg = <0x00220000 0x00080000>;
- read-only;
- };
- partition11@2A0000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x002a0000 0x01c60000>;
- };
- partition12@1f00000 {
- label = "jffs2";
- reg = <0x01f00000 0x00100000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
-
-#include "qcom-ipq4018-jalapeno.dtsi"
-
-/ {
- model = "8devices Jalapeno";
- compatible = "8dev,jalapeno";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- status = "okay";
-
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>; /* lan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- pinmux_1 {
- pins = "gpio53";
- function = "mdio";
- };
-
- pinmux_2 {
- pins = "gpio52";
- function = "mdc";
- };
-
- pinconf {
- pins = "gpio52", "gpio53";
- bias-pull-up;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <2>;
- bias-disable;
- };
-
- pin_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- status = "okay";
-
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition@e0000 {
- label = "APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- };
- };
-
- spi-nand@1 {
- status = "okay";
-
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ubi";
- reg = <0x00000000 0x08000000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,poll_required = <1>;
- qcom,poll_required_dynamic = <1>;
- qcom,phy_mdio_addr = <3>;
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- qcom,poll_required = <1>;
- qcom,poll_required_dynamic = <1>;
- qcom,phy_mdio_addr = <4>;
- vlan_tag = <2 0x20>;
-};
-
-&wifi0 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&wifi1 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o.
- * Author: Robert Marko <robert@meshpoint.me>
- */
-
-#include "qcom-ipq4018-jalapeno.dtsi"
-
-/ {
- model = "Crisis Innovation Lab MeshPoint.One";
- compatible = "cilab,meshpoint-one";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- soc {
- i2c-gpio {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "i2c-gpio";
- gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
- &tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */
- >;
-
- bme280@76 {
- status = "okay";
-
- compatible = "bosch,bme280";
- reg = <0x76>;
- };
-
- pcf2129@51 {
- status = "okay";
-
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
- ina230@40 {
- status = "okay";
-
- compatible = "ti,ina230";
- reg = <0x40>;
- shunt-resistor = <2000>;
- };
-
- ina230@44 {
- status = "okay";
-
- compatible = "ti,ina230";
- reg = <0x44>;
- shunt-resistor = <2000>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART >;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "meshpoint-one:blue:status";
- gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ZyXEL NBG6617";
- compatible = "zyxel,nbg6617";
-
- chosen {
- /*
- * the vendor u-boot adds root and mtdparts cmdline parameters
- * which we don't want... but we have to overwrite them or else
- * the kernel will take them at face value.
- */
- bootargs-append = " mtdparts= root=31:13";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- power: power {
- label = "nbg6617:green:power";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "nbg6617:green:usb";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
- linux,default-trigger = "usbport";
- };
-
- wlan2G {
- label = "nbg6617:green:wlan2G";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5G {
- label = "nbg6617:green:wlan5G";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "nbg6617:green:wps";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
- };
- led_pins: led_pinmux {
- mux {
- pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
- drive-strength = <0x8>;
- bias-disable;
- output-low;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l25635f@0 {
- compatible = "mx25l25635f", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- status = "okay";
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "APPSBL"; /* u-boot */
- reg = <0x000e0000 0x00080000>;
- /* U-Boot Standalone App "zloader" is located at 0x64000 */
- read-only;
- };
- partition6@160000 {
- label = "APPSBLENV"; /* u-boot env */
- reg = <0x00160000 0x00010000>;
- };
- partition7@170000 {
- /* make a backup of this partition! */
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition8@180000 {
- label = "kernel";
- reg = <0x00180000 0x00400000>;
- };
- partition9@580000 {
- label = "dualflag";
- reg = <0x00580000 0x00010000>;
- read-only;
- };
- partition10@590000 {
- label = "header";
- reg = <0x00590000 0x00010000>;
- };
- partition11@5a0000 {
- label = "romd";
- reg = <0x005a0000 0x00100000>;
- read-only;
- };
- partition12@6a0000 {
- label = "not_root_data";
- /*
- * for some strange reason, someone at ZyXEL
- * had the "great" idea to put the rootfs_data
- * in front of rootfs... Don't do that!
- * As a result this one, full MebiByte remains
- * unused.
- */
- reg = <0x006a0000 0x00100000>;
- };
- partition13@7a0000 {
- label = "rootfs";
- reg = <0x007a0000 0x01860000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ASUS RT-AC58U";
- compatible = "asus,rt-ac58u";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x8000000>;
- };
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs-append = " ubi.mtd=UBI_DEV";
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: status {
- label = "rt-ac58u:blue:status";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "rt-ac58u:blue:wan";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2G {
- label = "rt-ac58u:blue:wlan2G";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5G {
- label = "rt-ac58u:blue:wlan5G";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- usb {
- label = "rt-ac58u:blue:usb";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&usb3_port1>, <&usb3_port2>;
- linux,default-trigger = "usbport";
- };
-
- lan {
- label = "rt-ac58u:blue:lan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
- <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- /*
- * U-boot looks for "n25q128a11" node,
- * if we don't have it, it will spit out the following warning:
- * "ipq: fdt fixup unable to find compatible node".
- */
- compatible = "jedec,spi-nor";
- reg = <0>;
- linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
- spi-max-frequency = <30000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition@e0000 {
- label = "APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- /* 0x00180000 - 0x00200000 unused */
- };
- };
-
- spi-nand@1 {
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <30000000>;
-
- /*
- * U-boot looks for "spinand,mt29f" node,
- * if we don't have it, it will spit out the following warning:
- * "ipq: fdt fixup unable to find compatible node".
- */
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- /*
- * TODO: change to label = "ubi" once we drop 4.14.
- * also drop the bootargs-append and all the
- * userspace CI_UBIPART="UBI_DEV" remains.
- */
- label = "UBI_DEV";
- reg = <0x00000000 0x08000000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "RT-AC58U";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "RT-AC58U";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ZyXEL WRE6606";
- compatible = "zyxel,wre6606";
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- bootargs-append = " mtdparts=";
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wps {
- label = "wre6606:green:wps";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_green {
- label = "wre6606:green:wlan5g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "wre6606:green:power";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_red {
- label = "wre6606:red:wlan5g";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_red {
- label = "wre6606:red:wlan2g";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_green {
- label = "wre6606:green:wlan2g";
- gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l12805d@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition5@E0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition6@F0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition7@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition8@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x00180000 0x00ce0000>;
- };
-
- partition9@e60000 {
- label = "manufacture";
- reg = <0x00e60000 0x00050000>;
- read-only;
- };
-
- partition10@eb0000 {
- label = "storage";
- reg = <0x00eb0000 0x00150000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "OpenMesh A62";
- compatible = "openmesh,a62";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART >;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- red {
- label = "a62:red:status";
- gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
-
- power: green {
- label = "a62:green:status";
- gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- };
-
- blue {
- label = "a62:blue:status";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
- };
-
- watchdog {
- compatible = "linux,wdt-gpio";
- gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- hw_algo = "toggle";
- /* hw_margin_ms is actually 300s but driver limits it to 60s */
- hw_margin_ms = <60000>;
- always-running;
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- enable-usb-power {
- gpio-hog;
- gpios = <58 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "enable USB2 power";
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- /* partitions are passed via bootloader */
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "OM-A62";
- ieee80211-freq-limit = <5170000 5350000>;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A62";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A62";
- ieee80211-freq-limit = <5470000 5875000>;
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk04.1.dtsi"
-
-/ {
- model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
- compatible = "qcom,ipq4019";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- pinctrl@1000000 {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- };
- pinconf {
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- pinmux {
- function = "blsp_i2c0";
- pins = "gpio10", "gpio11";
- };
- pinconf {
- pins = "gpio10", "gpio11";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
-
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
- };
-
- blsp_dma: dma@7884000 {
- status = "okay";
- };
-
- spi0: spi@78b5000 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- mx25l25635e@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "mx25l25635e";
- spi-max-frequency = <24000000>;
- };
- };
-
- i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- usb3_ss_phy: ssphy@9a000 {
- status = "okay";
- };
-
- usb3_hs_phy: hsphy@a6000 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- usb2_hs_phy: hsphy@a8000 {
- status = "okay";
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- cryptobam: dma@8e04000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- qpic_bam: dma@7984000 {
- status = "okay";
- };
-
- nand: qpic-nand@79b0000 {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "MobiPromo CM520-79F";
- compatible = "mobipromo,cm520-79f";
-
- aliases {
- led-boot = &led_sys;
- led-failsafe = &led_sys;
- led-running = &led_sys;
- led-upgrade = &led_sys;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <1000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- ranges;
-
- sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
- num-chipselects = <0>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "cm520-79f:blue:usb";
- gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
- };
-
- led_sys: can {
- label = "cm520-79f:blue:can";
- gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "cm520-79f:blue:wan";
- gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "cm520-79f:blue:lan1";
- gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "cm520-79f:blue:lan2";
- gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "cm520-79f:blue:wlan2g";
- gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "cm520-79f:blue:wlan5g";
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- status = "okay";
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- mtd-mac-address = <&art 0x1006>;
-};
-
-&gmac1 {
- mtd-mac-address = <&art 0x5006>;
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "MIBIB";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "BOOTCONFIG";
- reg = <0x200000 0x100000>;
- };
-
- partition@300000 {
- label = "QSEE";
- reg = <0x300000 0x100000>;
- read-only;
- };
-
- partition@400000 {
- label = "QSEE_1";
- reg = <0x400000 0x100000>;
- read-only;
- };
-
- partition@500000 {
- label = "CDT";
- reg = <0x500000 0x80000>;
- read-only;
- };
-
- partition@580000 {
- label = "CDT_1";
- reg = <0x580000 0x80000>;
- read-only;
- };
-
- partition@600000 {
- label = "BOOTCONFIG1";
- reg = <0x600000 0x80000>;
- };
-
- partition@680000 {
- label = "APPSBLENV";
- reg = <0x680000 0x80000>;
- };
-
- partition@700000 {
- label = "APPSBL";
- reg = <0x700000 0x200000>;
- read-only;
- };
-
- partition@900000 {
- label = "APPSBL_1";
- reg = <0x900000 0x200000>;
- read-only;
- };
-
- art: partition@b00000 {
- label = "ART";
- reg = <0xb00000 0x80000>;
- read-only;
- };
-
- partition@b80000 {
- label = "ubi";
- reg = <0xb80000 0x7480000>;
- };
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "CM520-79F";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "CM520-79F";
-};
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Qxwlan E2600AC c1";
- compatible = "qxwlan,e2600ac-c1";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- partition@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x180000 0x1e80000>;
- };
- };
- };
-};
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Qxwlan E2600AC c2";
- compatible = "qxwlan,e2600ac-c2";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ubi";
- reg = <0x00000000 0x04000000>;
- };
- };
- };
-};
-
-&tlmm {
- nand_pins: nand-pins {
-
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-
- model = "Qxwlan E2600AC";
- compatible = "qcom,ipq4019";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256MB */
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- i2c@78b7000 { /* BLSP1 QUP2 */
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led1 {
- label = "e2600ac:green:wlan0";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- led2 {
- label = "e2600ac:green:wlan1";
- gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
- };
-
- led3 {
- label = "e2600ac:green:usb";
- gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
- trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
- linux,default-trigger = "usbport";
- };
-
- led4 {
- label = "e2600ac:green:ctrl1";
- gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
- };
-
- led5 {
- label = "e2600ac:green:ctrl2";
- gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
- };
-
- led6 {
- label = "e2600ac:green:ctrl3";
- gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- i2c_0_pins: i2c-0-pinmux {
- mux {
- pins = "gpio20", "gpio21";
- function = "blsp_i2c0";
- bias-disable;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial0-pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/*
- * Device Tree Source for Linksys EA8300 (Dallas)
- *
- * Copyright (C) 2019 Jeff Kletsky
- *
- */
-
-/dts-v1/;
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Linksys EA8300 (Dallas)";
- compatible = "linksys,ea8300", "qcom,ipq4019";
-
-
- aliases {
- led-boot = &led_wps_amber;
- led-failsafe = &led_wps;
- led-running = &led_linksys;
- led-upgrade = &led_world;
- serial0 = &blsp1_uart1;
- };
-
-
- leds {
- compatible = "gpio-leds";
-
- // Retain node names from running OEM on EA8300
-
- // Front panel LEDs, top to bottom
-
- led_plug: diag {
- label = "ea8300:amber:plug";
- gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
- };
-
- led_world: internet {
- label = "ea8300:amber:world";
- gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
- };
-
- led_wps: wps {
- label = "ea8300:white:wps";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- };
-
- led_wps_amber: wps_amber {
- label = "ea8300:amber:wps";
- gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- led_linksys: pwr {
- label = "ea8300:white:linksys";
- gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- };
-
- // On back panel, above USB socket
-
- led_usb: usb {
- label = "ea8300:green:usb";
- gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
- trigger-sources = <&usb3_port1>, <&usb3_port2>,
- <&usb2_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
-
- keys {
- compatible = "gpio-keys";
-
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- button@1 {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- };
- };
-
-
- //
- // OEM U-Boot provides either
- // init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \
- // root=ubi0:ubifs rootwait rw
- // or the same with ubi.mtd=13,2048
- //
-
- chosen {
- bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
- };
-
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- status = "okay";
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
-
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "mibib";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "qsee";
- reg = <0x200000 0x100000>;
- read-only;
- };
-
- partition@300000 {
- label = "cdt";
- reg = <0x300000 0x80000>;
- read-only;
- };
-
- partition@380000 {
- label = "appsblenv";
- reg = <0x380000 0x80000>;
- read-only;
- };
-
- partition@400000 {
- label = "ART";
- reg = <0x400000 0x80000>;
- read-only;
- };
-
- partition@480000 {
- label = "appsbl";
- reg = <0x480000 0x200000>;
- read-only;
- };
-
- partition@680000 {
- label = "u_env";
- reg = <0x680000 0x80000>;
- // writable -- U-Boot environment
- };
-
- partition@700000 {
- label = "s_env";
- reg = <0x700000 0x40000>;
- // writable -- Boot counter records
- };
-
- partition@740000 {
- label = "devinfo";
- reg = <0x740000 0x40000>;
- read-only;
- };
-
- partition@780000 {
- label = "kernel";
- reg = <0x780000 0x5800000>;
- };
-
- partition@a80000 {
- label = "rootfs";
- reg = <0xa80000 0x5500000>;
- };
-
- partition@5f80000 {
- label = "alt_kernel";
- reg = <0x5f80000 0x5800000>;
- };
-
- partition@6280000 {
- label = "alt_rootfs";
- reg = <0x6280000 0x5500000>;
- };
-
- partition@b780000 {
- label = "sysdiag";
- reg = <0xb780000 0x100000>;
- read-only;
- };
-
- partition@b880000 {
- label = "syscfg";
- reg = <0xb880000 0x4680000>;
- read-only;
- };
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- serial_0_pins: serial0-pinmux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- // gpio61 controls led_usb
-
- pulldowns {
- pins = "gpio55", "gpio56", "gpio57",
- "gpio60", "gpio62", "gpio63",
- "gpio64", "gpio65", "gpio66",
- "gpio67", "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
-
-&wifi1 {
- status = "okay";
- ieee80211-freq-limit = <5170000 5330000>;
- qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
-
-&wifi2 {
- status = "okay";
- ieee80211-freq-limit = <5490000 5835000>;
- qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "EnGenius EAP2200";
- compatible = "engenius,eap2200";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "eap2200:amber:power";
- gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "eap2200:blue:lan1";
- gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "eap2200:blue:lan2";
- gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "eap2200:blue:wlan2g";
- gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "eap2200:yellow:wlan5g";
- gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wlan5g2 {
- label = "eap2200:yellow:wlan5g2";
- gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy2tpt";
- };
-
- mode {
- label = "eap2200:blue:mode";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x10>;
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "0:APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition7@170000 {
- label = "0:ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- vlan_tag = <1 0x10>;
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "rootfs1";
- reg = <0x00000000 0x04000000>;
- };
- partition@40000000 {
- label = "ubi";
- reg = <0x04000000 0x04000000>;
- };
-
- };
- };
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
- ieee80211-freq-limit = <5470000 5875000>;
- qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
-};
-
-&wifi1 {
- status = "okay";
- ieee80211-freq-limit = <5170000 5350000>;
- qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Box 7530";
- compatible = "avm,fritzbox-7530";
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &info_red;
- led-running = &power_green;
- led-upgrade = &info_green;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- dect {
- label = "dect";
- gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- info_red: info_red {
- label = "fritzbox-7530:red:info";
- gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
- };
-
- info_green: info {
- label = "fritzbox-7530:green:info";
- gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "fritzbox-7530:green:wlan";
- gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
- };
-
- fon {
- label = "fritzbox-7530:green:fon";
- gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power {
- label = "fritzbox-7530:green:power";
- gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "fritzbox-7530:green:wps";
- gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- usb-power {
- line-name = "enable USB3 power";
- gpios = <49 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x000000 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x080000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "CDT";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "QSEE_B";
- reg = <0x1c0000 0x80000>;
- read-only;
- };
-
- partition@240000 {
- label = "urlader0";
- reg = <0x240000 0x40000>;
- read-only;
- };
-
- partition@280000 {
- label = "urlader1";
- reg = <0x280000 0x40000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "nand-tffs";
- reg = <0x2c0000 0x840000>;
- read-only;
- };
-
- partition@b00000 {
- /* 'kernel1' in AVM firmware */
- label = "uboot0";
- reg = <0xb00000 0x400000>;
- };
-
- partition@f00000 {
- /* 'kernel2' in AVM firmware */
- label = "uboot1";
- reg = <0xf00000 0x400000>;
- };
-
- partition@1300000 {
- label = "ubi";
- reg = <0x1300000 0x6d00000>;
- };
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- dsl@1,0 {
- compatible = "intel,vrx518";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Repeater 1200";
- compatible = "avm,fritzrepeater-1200";
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_red;
- label-mac-device = &wifi0;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- phy-mode = "rgmii-rxid";
- qcom,num_gmac = <1>;
- qcom,single-phy;
- };
- };
-
- key {
- compatible = "gpio-keys";
-
- wps {
- label = "WPS button";
- gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_red: power_red {
- label = "fritzwlan-1200:red:power";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power_green {
- label = "fritzwlan-1200:green:power";
- gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- };
-
- power_yellow {
- label = "fritzwlan-1200:yellow:power";
- gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- phy-reset {
- line-name = "PHY-reset";
- gpios = <19 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-
- phy-reset-2 {
- line-name = "PHY-reset-2";
- gpios = <47 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "CDT";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "QSEE_B";
- reg = <0x1c0000 0x80000>;
- read-only;
- };
-
- partition@240000 {
- label = "urlader0";
- reg = <0x240000 0x40000>;
- read-only;
- };
-
- partition@280000 {
- label = "urlader1";
- reg = <0x280000 0x40000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "nand-tffs";
- reg = <0x2c0000 0x840000>;
- read-only;
- };
-
- partition@b00000 {
- /* 'kernel1' in AVM firmware */
- label = "uboot0";
- reg = <0xb00000 0x400000>;
- };
-
- partition@f00000 {
- /* 'kernel2' in AVM firmware */
- label = "uboot1";
- reg = <0xf00000 0x400000>;
- };
-
- partition@1300000 {
- label = "ubi";
- reg = <0x1300000 0x6d00000>;
- };
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <0>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Repeater 3000";
- compatible = "avm,fritzrepeater-3000";
-
- aliases {
- led-boot = &power_led;
- led-failsafe = &power_led;
- led-running = &power_led;
- led-upgrade = &power_led;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- key {
- compatible = "gpio-keys";
-
- connect {
- label = "Connect";
- gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- connect_red {
- label = "fritzwlan-3000:red:connect";
- gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
- };
-
- connect_green {
- label = "fritzwlan-3000:green:connect";
- gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
- };
-
- connect_blue {
- label = "fritzwlan-3000:blue:connect";
- gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
- };
-
- power_led: power {
- label = "fritzwlan-3000:green:power";
- gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x000000 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x080000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "CDT";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "QSEE_B";
- reg = <0x1c0000 0x80000>;
- read-only;
- };
-
- partition@240000 {
- label = "urlader0";
- reg = <0x240000 0x40000>;
- read-only;
- };
-
- partition@280000 {
- label = "urlader1";
- reg = <0x280000 0x40000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "nand-tffs";
- reg = <0x2c0000 0x840000>;
- read-only;
- };
-
- partition@b00000 {
- /* 'kernel1' in AVM firmware */
- label = "uboot0";
- reg = <0xb00000 0x400000>;
- };
-
- partition@f00000 {
- /* 'kernel2' in AVM firmware */
- label = "uboot1";
- reg = <0xf00000 0x400000>;
- };
-
- partition@1300000 {
- label = "ubi";
- reg = <0x1300000 0x6d00000>;
- };
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
-};
-
-&wifi1 {
- status = "okay";
- ieee80211-freq-limit = <5170000 5350000>;
- /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- /* QCA9984 */
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- ieee80211-freq-limit = <5470000 5875000>;
- /* Uses the reference BDF */
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2019, Robert Marko <robimarko@gmail.com> */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "8devices Habanero DVK";
- compatible = "8dev,habanero-dvk";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_upgrade;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- status = "okay";
-
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "habanero-dvk:green:status";
- gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- led_upgrade: upgrade {
- label = "habanero-dvk:green:upgrade";
- gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "habanero-dvk:green:wlan2g";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "habanero-dvk:green:wlan5g";
- gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
- };
-};
-
-&vqmmc {
- status = "okay";
-};
-
-&sdhci {
- status = "okay";
-
- pinctrl-0 = <&sd_pins>;
- pinctrl-names = "default";
- cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&vqmmc>;
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56", "gpio57",
- "gpio60", "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67", "gpio68",
- "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- sd_pins: sd_pins {
- pinmux {
- function = "sdio";
- pins = "gpio23", "gpio24", "gpio25", "gpio26",
- "gpio28", "gpio29", "gpio30", "gpio31";
- drive-strength = <10>;
- };
-
- pinmux_sd_clk {
- function = "sdio";
- pins = "gpio27";
- drive-strength = <16>;
- };
-
- pinmux_sd7 {
- function = "sdio";
- pins = "gpio32";
- drive-strength = <10>;
- bias-disable;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition@e0000 {
- label = "APPSBLENV"; /* uboot env */
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition@180000 {
- label = "cfg";
- reg = <0x00180000 0x00040000>;
- };
- partition@1c0000 {
- label = "firmware";
- compatible = "denx,fit";
- reg = <0x001c0000 0x01e40000>;
- };
- };
- };
-};
-
-/* Some DVK boards ship without NAND */
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- /* Free slot for use */
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- };
-};
-
-&wifi0 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "8devices-Habanero";
-};
-
-&wifi1 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "8devices-Habanero";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/dts-v1/;
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ASUS Lyra MAP-AC2200";
- compatible = "asus,map-ac2200";
-
- aliases {
- led-boot = &led_blue0;
- led-failsafe = &led_red0;
- led-running = &led_blue0;
- led-upgrade = &led_red0;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "CDT";
- reg = <0x200000 0x80000>;
- read-only;
- };
-
- partition@280000 {
- label = "APPSBL";
- reg = <0x280000 0x140000>;
- read-only;
- };
-
- partition@3c0000 {
- label = "APPSBLENV";
- reg = <0x3c0000 0x40000>;
- read-only;
- };
-
- partition@400000 {
- label = "ubi";
- reg = <0x400000 0x7c00000>;
- };
- };
- };
-};
-
-&tlmm {
- i2c_0_pins: i2c_0_pinmux {
- pinmux {
- function = "blsp_i2c0";
- pins = "gpio20", "gpio21";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
- ieee80211-freq-limit = <5470000 5875000>;
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
- ieee80211-freq-limit = <5170000 5350000>;
- };
- };
-};
-
-&usb2_hs_phy {
- /* Bluetooth module attached via USB */
- status = "okay";
-};
-
-&blsp1_i2c3 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- led-controller@32 {
- /* 9-channel RGB LED controller */
- compatible = "national,lp5523";
- reg = <0x32>;
- clock-mode = [01];
-
- led_blue0: blue0 {
- chan-name = "blue0";
- label = "map-ac2200:blue:chan0";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- blue1 {
- chan-name = "blue1";
- label = "map-ac2200:blue:chan1";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- blue2 {
- chan-name = "blue2";
- label = "map-ac2200:blue:chan2";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- led_green0: green0 {
- chan-name = "green0";
- label = "map-ac2200:green:chan0";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- green1 {
- chan-name = "green1";
- label = "map-ac2200:green:chan1";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- green2 {
- chan-name = "green2";
- label = "map-ac2200:green:chan2";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- led_red0: red0 {
- chan-name = "red0";
- label = "map-ac2200:red:chan0";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- red1 {
- chan-name = "red1";
- label = "map-ac2200:red:chan1";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- red2 {
- chan-name = "red2";
- label = "map-ac2200:red:chan2";
- led-cur = [fa];
- max-cur = [ff];
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: ISC
-// Copyright (c) 2015, The Linux Foundation. All rights reserved.
-// Copyright (c) 2019, Cezary Jackiewicz <cezary@eko.one.pl>.
-// Copyright (c) 2020, Pawel Dembicki <paweldembicki@gmail.com>.
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/soc/qcom,tcsr.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Cell C RTL30VW";
- compatible = "cellc,rtl30vw";
-
- aliases {
- led-boot = &led_power_blue;
- led-failsafe = &led_power_red;
- led-running = &led_power_blue;
- led-upgrade = &led_power_red;
- };
-
- chosen {
- bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro";
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- num-chipselects = <1>;
-
- mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <2>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_blue: power_blue {
- gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:power";
- default-state = "on";
- };
-
- led_power_red: power_red {
- gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:red:power";
- };
-
- tp28 {
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- label = "rtl30vw:ext:tp28";
- default-state = "keep";
- };
-
- tp27 {
- gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- label = "rtl30vw:ext:tp27";
- default-state = "keep";
- };
-
- wlan2g {
- gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wlan2g";
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wlan5g";
- linux,default-trigger = "phy1tpt";
- };
-
- wps {
- gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wps";
- };
-
- voip {
- gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:voip";
- };
-
- s1 {
- gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s1";
- };
-
- s2 {
- gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s2";
- };
-
- s3 {
- gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s3";
- };
-
- s4 {
- gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s4";
- };
-
- signal {
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:red:signal";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- /*"n25q128a11" is required for proper nand recognition in u-boot. */
- compatible = "jedec,spi-nor", "n25q128a11";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
-
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- partition@180000 {
- label = "0:BOOTCONFIG";
- reg = <0x180000 0x10000>;
- read-only;
- };
- };
- };
-
- flash@1 {
- /*
- * Factory U-boot looks in 0:BOOTCONFIG partition for active
- * partitions settings and mangle partition config. So kernel
- * /kernel_1 and rootfs/rootfs_1 pairs can be swaped.
- * It isn't a problem but we never can be sure where OFW put
- * factory images. "spinand,mt29f" value is required for proper
- * nand recognition in u-boot.
- */
- compatible = "spi-nand","spinand,mt29f";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x0 0x400000>;
- };
-
- partition@400000 {
- label = "rootfs";
- reg = <0x400000 0x2000000>;
- };
-
- partition@2400000 {
- label = "kernel_1";
- reg = <0x2400000 0x400000>;
- };
-
- partition@2800000 {
- label = "rootfs_1";
- reg = <0x2800000 0x2000000>;
- };
-
- partition@4800000 {
- label = "ubifs";
- reg = <0x4800000 0x3800000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "cellc,rtl30vw";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "cellc,rtl30vw";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "qcom-ipq4019-u4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Unielec U4019 (32M)";
- compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
- broken-flash-reset;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- partition@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x180000 0x1e80000>;
- };
- };
- };
-};
-
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- compatible = "unielec,u4019","qcom,ipq4019";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- serial0 = &blsp1_uart1;
- serial1 = &blsp1_uart2;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_status: led2 {
- label = "u4019:green:led2";
- gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial0-pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- led_pins: led_pinmux {
- mux {
- function = "gpio";
- pins = "gpio68";
- bias-disabled;
- output-low;
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Compex WPJ419";
- compatible = "compex,wpj419", "qcom,ipq4019";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- reserved-memory {
- ranges;
- rsvd1@87000000 {
- /* Reserved for other subsystem */
- reg = <0x87000000 0x500000>;
- no-map;
- };
- wifi_dump@87500000 {
- reg = <0x87500000 0x600000>;
- no-map;
- };
-
- rsvd2@87B00000 {
- /* Reserved for other subsystem */
- reg = <0x87B00000 0x500000>;
- no-map;
- };
- };
-
- chosen {
- bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
- };
-
- soc {
- pinctrl@1000000 {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9", "gpio10", "gpio11";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio20", "gpio21";
- function = "blsp_i2c0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- led_0_pins: led0_pinmux {
- mux_1 {
- pins = "gpio36";
- function = "led0";
- bias-pull-down;
- };
- mux_2 {
- pins = "gpio40";
- function = "led4";
- bias-pull-down;
- };
- };
- };
-
- blsp_dma: dma@7884000 {
- status = "okay";
- };
-
- spi_0: spi@78b5000 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
- num-cs = <2>;
-
- flash0@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
- broken-flash-reset;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x040000 0x020000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:QSEE";
- reg = <0x060000 0x060000>;
- read-only;
- };
-
- partition@c0000 {
- label = "0:CDT";
- reg = <0x0c0000 0x010000>;
- read-only;
- };
-
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x0d0000 0x010000>;
- read-only;
- };
-
- partition@e0000 {
- label = "u-boot-env";
- reg = <0x0e0000 0x010000>;
- };
-
- partition@f0000 {
- label = "u-boot";
- reg = <0x0f0000 0x080000>;
- read-only;
- };
-
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x010000>;
- read-only;
- };
- };
- };
-
- nand@1 {
- reg = <1>;
- status = "okay";
- compatible = "spi-nand";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* The device has 128MB, but we can only address
- * 64MB because of the bootloader's default settings.
- * This is due to the old mt29f driver,
- * which detected the deivce with only 64MB
- */
- partition@0 {
- label = "ubi";
- reg = <0x0000000 0x4000000>;
- };
- };
- };
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <5000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- i2c_0: i2c@78b7000 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- usb3_ss_phy: ssphy@9a000 {
- status = "okay";
- };
-
- usb3_hs_phy: hsphy@a6000 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- usb2_hs_phy: hsphy@a8000 {
- status = "okay";
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- cryptobam: dma@8e04000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x1e>;
- switch_wan_bmp = <0x20>;
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- qpic_bam: dma@7984000 {
- status = "okay";
- };
-
- pcie0: pci@40000000 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- nand: qpic-nand@79b0000 {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
- };
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Compex WPJ428";
- compatible = "compex,wpj428";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &status;
- led-failsafe = &status;
- led-upgrade = &status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- status: rss4 {
- label = "wpj428:green:rss4";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
-
- rss3 {
- label = "wpj428:green:rss3";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- };
- };
-
- beeper: beeper {
- compatible = "gpio-beeper";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio53";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio52";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition5@f0000 {
- label = "0:APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition5@170000 {
- label = "0:ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition6@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x00180000 0x01e80000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Aruba AP-303";
- compatible = "aruba,ap-303";
-
- aliases {
- led-boot = &led_system_green;
- led-failsafe = &led_system_red;
- led-running = &led_system_green;
- led-upgrade = &led_system_red;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi_green {
- label = "ap-303:green:wifi";
- gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wifi_amber {
- label = "ap-303:amber:wifi";
- gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- led_system_red: system_red {
- label = "ap-303:red:system";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_green: system_green {
- label = "ap-303:green:system";
- gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- /*
- * In addition to the Pins listed below,
- * the following GPIOs have "features":
- * 54 - out - active low to force HW reset
- * 41 - out - active low to reset TPM
- * 43 - out - active low to reset BLE radio
- * 19 - in - active high when DC powered
- */
-
- phy-reset {
- line-name = "PHY-reset";
- gpios = <42 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * There is no partition map for the NOR flash
- * in the stock firmware.
- *
- * All partitions here are based on offsets
- * found in the U-Boot GPL code and information
- * from smem.
- */
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "mibib";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "qsee";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "cdt";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "ddrparams";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "ART";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "appsbl";
- reg = <0xf0000 0xf0000>;
- read-only;
- };
-
- partition@1e0000 {
- label = "mfginfo";
- reg = <0x1e0000 0x10000>;
- read-only;
- };
-
- partition@1f0000 {
- label = "apcd";
- reg = <0x1f0000 0x10000>;
- read-only;
- };
-
- partition@200000 {
- label = "osss";
- reg = <0x200000 0x180000>;
- read-only;
- };
-
- partition@380000 {
- /* This is empty */
- label = "appsblenv";
- reg = <0x380000 0x10000>;
- read-only;
- };
-
- partition@390000 {
- label = "pds";
- reg = <0x390000 0x10000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "fcache";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- /* Called osss1 in smem */
- label = "u-boot-env-bak";
- reg = <0x3b0000 0x10000>;
- read-only;
- };
-
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Aruba AP-303H";
- compatible = "aruba,ap-303h";
-
- aliases {
- led-boot = &led_system_green;
- led-failsafe = &led_system_red;
- led-running = &led_system_green;
- led-upgrade = &led_system_amber;
- };
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2000>;
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- i2c_0: i2c@78b7000 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- tpm@29 {
- /* No Driver */
- compatible = "atmel,at97sc3203";
- reg = <0x29>;
- read-only;
- };
-
- power-monitor@40 {
- /* No driver */
- compatible = "isl,isl28022";
- reg = <0x40>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi_green {
- label = "ap-303h:green:wifi";
- gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wifi_amber {
- label = "ap-303h:amber:wifi";
- gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- pse {
- label = "ap-303h:green:pse";
- gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_red: system_red {
- label = "ap-303h:red:system";
- gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_green: system_green {
- label = "ap-303h:green:system";
- gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_amber: system_amber {
- label = "ap-303h:amber:system";
- gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset button";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp1_uart2 {
- /* Texas Instruments CC2540T BLE radio */
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- /*
- * In addition to the Pins listed below,
- * the following GPIOs have "features":
- * 39 - out - active low to force HW reset
- * 32 - out - active low to reset TPM
- * 43 - out - active low to reset BLE radio
- * 41 - out - pulse to set warm reset status
- * 34 - out - active low to enable PSE port
- * 22 - in - active low when 802.3at powered
- * 29 - in - active high when DC powered
- * 40 - in - active low when reset due to cold HW reset
- * 30 - in - active low when USB overcurrent detected
- * 35 - in - interrupt line for power monitor chip
- * 31 - in - active low when PSE port active
- */
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio12", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio20", "gpio21";
- function = "blsp_i2c0";
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- serial_0_pins: serial_0_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial_1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- usb-power {
- line-name = "USB-power";
- gpios = <23 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * There is no partition map for the NOR flash
- * in the stock firmware.
- *
- * All partitions here are based on offsets
- * found in the U-Boot GPL code and information
- * from smem.
- */
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "mibib";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "qsee";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "cdt";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "ddrparams";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "appsblenv";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "appsbl";
- reg = <0xf0000 0x100000>;
- read-only;
- };
-
- partition@1e0000 {
- label = "ART";
- reg = <0x1f0000 0x10000>;
- read-only;
- };
-
- partition@1f0000 {
- label = "osss";
- reg = <0x200000 0x170000>;
- read-only;
- };
-
- partition@200000 {
- label = "pds";
- reg = <0x370000 0x10000>;
- read-only;
- };
-
- partition@380000 {
- label = "apcd";
- reg = <0x380000 0x10000>;
- read-only;
- };
-
- partition@390000 {
- label = "mfginfo";
- reg = <0x390000 0x10000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "fcache";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- /* Called osss1 in smem */
- label = "u-boot-env-bak";
- reg = <0x3b0000 0x10000>;
- read-only;
- };
-
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3c0000 0x40000>;
- read-only;
- };
- };
- };
-
- flash@1 {
- status = "okay";
-
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- /* 'aos0' in Aruba firmware */
- label = "aos0";
- reg = <0x0 0x2000000>;
- read-only;
- };
-
- partition@2000000 {
- /* 'aos1' in Aruba firmware */
- label = "ubi";
- reg = <0x2000000 0x2000000>;
- };
-
- partition@4000000 {
- label = "aruba-ubifs";
- reg = <0x4000000 0x4000000>;
- read-only;
- };
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Aruba AP-365";
- compatible = "aruba,ap-365";
-
- aliases {
- led-boot = &led_system_green;
- led-failsafe = &led_system_red;
- led-running = &led_system_green;
- led-upgrade = &led_system_red;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system_red: system_red {
- label = "ap-365:red:system";
- gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
- };
-
- led_system_green: system_green {
- label = "ap-365:green:system";
- gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
- };
-
- system_amber {
- label = "ap-365:amber:system";
- gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
- };
- };
-
- watchdog {
- compatible = "linux,wdt-gpio";
- gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
- hw_algo = "toggle";
- hw_margin_ms = <1000>;
- always-running;
- };
-};
-
-&tlmm {
- /*
- * In addition to the Pins listed below,
- * the following GPIOs have "features":
- * 39 - out - pulse low to reset watchdog status flipflop
- * 40 - out - active high to enable watchdog
- * 41 - out - watchdog poke
- * 42 - out - active low to reset BLE radio
- * 43 - out - active low to reset TPM
- * 47 - out - pulse low to reset warm reset status
- * 54 - out - active low to force HW reset
- * 18 - in - PHY interrupt line
- * 45 - in - power monitor interrupt
- * 48 - in - active low when cold reset
- * 52 - in - active high when watchdog reset
- */
-
- phy-reset {
- line-name = "PHY-reset";
- gpios = <42 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&i2c_0 {
- power-monitor@40 {
- /* No driver */
- compatible = "isl,isl28022";
- reg = <0x40>;
- };
-
- temperature-sensor@48 {
- compatible = "adi,ad7416";
- reg = <0x48>;
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * There is no partition map for the NOR flash
- * in the stock firmware.
- *
- * All partitions here are based on offsets
- * found in the U-Boot GPL code and information
- * from smem.
- */
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "mibib";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "qsee";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "cdt";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "ddrparams";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "u-boot-env";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "appsbl";
- reg = <0xf0000 0x100000>;
- read-only;
- };
-
- partition@1f0000 {
- label = "ART";
- reg = <0x1f0000 0x10000>;
- read-only;
- };
-
- partition@200000 {
- label = "osss";
- reg = <0x200000 0x170000>;
- read-only;
- };
-
- partition@370000 {
- label = "pds";
- reg = <0x370000 0x10000>;
- read-only;
- };
-
- partition@380000 {
- label = "apcd";
- reg = <0x380000 0x10000>;
- read-only;
- };
-
- partition@390000 {
- label = "mfginfo";
- reg = <0x390000 0x10000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "fcache";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- label = "osss1";
- reg = <0x3b0000 0x50000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- /delete-node/ ethernet-phy@0;
- /delete-node/ ethernet-phy@2;
- /delete-node/ ethernet-phy@3;
- /delete-node/ ethernet-phy@4;
-
- ethernet-phy@5 {
- reg = <0x5>;
- };
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- qcom,single-phy;
- qcom,num_gmac = <1>;
- phy-mode = "rgmii-id";
- status = "okay";
- };
-
- i2c_0: i2c@78b7000 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- tpm@29 {
- /* No Driver */
- compatible = "atmel,at97sc3203";
- reg = <0x29>;
- read-only;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset button";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- /* Texas Instruments CC2540T BLE radio */
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <5>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio10", "gpio11";
- function = "blsp_i2c0";
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- serial_0_pins: serial_0_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial_1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- /* 'aos0' in Aruba firmware */
- label = "aos0";
- reg = <0x0 0x2000000>;
- read-only;
- };
-
- partition@2000000 {
- /* 'aos1' in Aruba firmware */
- label = "ubi";
- reg = <0x2000000 0x2000000>;
- };
-
- partition@4000000 {
- label = "aruba-ubifs";
- reg = <0x4000000 0x4000000>;
- read-only;
- };
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "GL.iNet GL-B1300";
- compatible = "glinet,gl-b1300";
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x18>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "gl-b1300:green:power";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- mesh {
- label = "gl-b1300:green:mesh";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wlan {
- label = "gl-b1300:green:wlan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l25635f@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- MIBIB@40000 {
- label = "MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- QSEE@60000 {
- label = "QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- CDT@c0000 {
- label = "CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- DDRPARAMS@d0000 {
- label = "DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- APPSBLENV@e0000 {
- label = "APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- APPSBL@f0000 {
- label = "APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
-
- ART@170000 {
- label = "ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- firmware@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x180000 0x1e80000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio54";
- };
- pinconf {
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "GL-B1300";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "GL-B1300";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Meraki MR33 (Stinkbug)
- *
- * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
- * Copyright (C) 2017 Christian Lamparter <chunkeey@googlemail.com>
- *
- * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Meraki MR33 Access Point";
- compatible = "meraki,mr33";
-
- aliases {
- led-boot = &status_green;
- led-failsafe = &status_red;
- led-running = &status_green;
- led-upgrade = &power_orange;
- };
-
- /* Do we really need this defined? */
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- /* It is a 56-bit counter that supplies the count to the ARM arch
- timers and without upstream driver */
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- bluetooth {
- compatible = "ti,cc2650";
- enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- qcom,single-phy;
- qcom,num_gmac = <1>;
- phy-mode = "rgmii-rxid";
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_orange: power {
- label = "mr33:orange:power";
- gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
- panic-indicator;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <1>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
-
-&blsp1_i2c3 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- at24@50 {
- compatible = "atmel,24c64";
- pagesize = <32>;
- reg = <0x50>;
- read-only; /* This holds our MAC & Meraki board-data */
- };
-};
-
-&blsp1_i2c4 {
- pinctrl-0 = <&i2c_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- led-controller@30 {
- compatible = "ti,lp5562";
- reg = <0x30>;
- clock-mode = /bits/8 <2>;
- enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
-
- /* RGB led */
- status_red: chan0 {
- chan-name = "mr33:red:status";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- status_green: chan1 {
- chan-name = "mr33:green:status";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- chan2 {
- chan-name = "mr33:blue:status";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- chan3 {
- chan-name = "mr33:white:status";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "sbl1";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@100000 {
- label = "mibib";
- reg = <0x00100000 0x00100000>;
- read-only;
- };
- partition@200000 {
- label = "bootconfig";
- reg = <0x00200000 0x00100000>;
- read-only;
- };
- partition@300000 {
- label = "qsee";
- reg = <0x00300000 0x00100000>;
- read-only;
- };
- partition@400000 {
- label = "qsee_alt";
- reg = <0x00400000 0x00100000>;
- read-only;
- };
- partition@500000 {
- label = "cdt";
- reg = <0x00500000 0x00080000>;
- read-only;
- };
- partition@580000 {
- label = "cdt_alt";
- reg = <0x00580000 0x00080000>;
- read-only;
- };
- partition@600000 {
- label = "ddrparams";
- reg = <0x00600000 0x00080000>;
- read-only;
- };
- partition@700000 {
- label = "u-boot";
- reg = <0x00700000 0x00200000>;
- read-only;
- };
- partition@900000 {
- label = "u-boot-backup";
- reg = <0x00900000 0x00200000>;
- read-only;
- };
- partition@b00000 {
- label = "ART";
- reg = <0x00b00000 0x00080000>;
- read-only;
- };
- partition@c00000 {
- label = "ubi";
- reg = <0x00c00000 0x07000000>;
- /*
- * Do not try to allocate the remaining
- * 4 MiB to this ubi partition. It will
- * confuse the u-boot and it might not
- * find the kernel partition anymore.
- */
- };
- };
- };
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- /*
- * GPIO43 should be 0/1 whenever the unit is
- * powered through PoE or AC-Adapter.
- * That said, playing with this seems to
- * reset the AP.
- */
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- /* We use the i2c-0 pins for serial_1 */
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- pinmux {
- function = "blsp_i2c0";
- pins = "gpio20", "gpio21";
- };
- pinconf {
- pins = "gpio20", "gpio21";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- i2c_1_pins: i2c_1_pinmux {
- pinmux {
- function = "blsp_i2c1";
- pins = "gpio34", "gpio35";
- };
- pinconf {
- pins = "gpio34", "gpio35";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- /*
- * There are 18 pins. 15 pins are common between LCD and NAND.
- * The QPIC controller arbitrates between LCD and NAND. Of the
- * remaining 4, 2 are for NAND and 2 are for LCD exclusively.
- *
- * The meraki source hints that the bluetooth module claims
- * pin 52 as well. But sadly, there's no data whenever this
- * is a NAND or LCD exclusive pin or not.
- */
-
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Meraki-MR33";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Meraki-MR33";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "OpenMesh A42";
- compatible = "openmesh,a42";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- red {
- label = "a42:red:status";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
-
- power: green {
- label = "a42:green:status";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- blue {
- label = "a42:blue:status";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
- };
-
- watchdog {
- compatible = "linux,wdt-gpio";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- hw_algo = "toggle";
- /* hw_margin_ms is actually 300s but driver limits it to 60s */
- hw_margin_ms = <60000>;
- always-running;
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- /* partitions are passed via bootloader */
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A42";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A42";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ALFA Network AP120C-AC";
- compatible = "alfa-network,ap120c-ac";
-
- aliases {
- led-boot = &status;
- led-failsafe = &status;
- led-running = &status;
- led-upgrade = &status;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- status: status {
- label = "ap120c-ac:blue:status";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- wan {
- label = "ap120c-ac:amber:wan";
- gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "ap120c-ac:green:wlan2g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "ap120c-ac:red:wlan5g";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- phys = <&usb3_hs_phy>;
- phy-names = "usb2-phy";
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- qca8075: ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_i2c3 {
- status = "okay";
-
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
-
- tpm@29 {
- compatible = "atmel,at97sc3204t";
- reg = <0x29>;
- };
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- pinctrl-0 = <&spi0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
- <&tlmm 4 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition@e0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- };
-
- partition@f0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition@180000 {
- label = "priv_data1";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
-
- partition@190000 {
- label = "priv_data2";
- reg = <0x00190000 0x00010000>;
- read-only;
- };
- };
- };
-
- nand@1 {
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "rootfs1";
- reg = <0x00000000 0x04000000>;
- };
-
- partition@4000000 {
- label = "rootfs2";
- reg = <0x04000000 0x04000000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial0_pins>;
- pinctrl-names = "default";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,forced_duplex = <1>;
- qcom,forced_speed = <1000>;
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- qcom,forced_duplex = <1>;
- qcom,forced_speed = <1000>;
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&tlmm {
- i2c0_pins: i2c0_pinmux {
- mux_i2c {
- function = "blsp_i2c0";
- pins = "gpio58", "gpio59";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_mdio {
- pins = "gpio53";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_mdc {
- pins = "gpio52";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial0_pins: serial0_pinmux {
- mux_uart {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi0_pins: spi0_pinmux {
- mux_spi {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54", "gpio4";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EZVIZ CS-W3-WD1200G EUP";
- compatible = "ezviz,cs-w3-wd1200g-eup";
-
- aliases {
- led-boot = &led_status_green;
- led-failsafe = &led_status_red;
- led-running = &led_status_blue;
- led-upgrade = &led_status_green;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- reset-delay-us = <5000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status_red: status_red {
- label = "cs-w3-wd1200g-eup:red:status";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- };
-
- led_status_green: status_green {
- label = "cs-w3-wd1200g-eup:green:status";
- gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
- };
-
- led_status_blue: status_blue {
- label = "cs-w3-wd1200g-eup:blue:status";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio53";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio52";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition5@E0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition6@F0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition7@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition9@580000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x00180000 0x00e80000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "D-Link DAP 2610";
- compatible = "dlink,dap-2610";
-
- aliases {
- led-boot = &led_red;
- led-failsafe = &led_red;
- led-running = &led_green;
- led-upgrade = &led_red;
- };
-
- soc {
- edma@c080000 {
- qcom,num_gmac = <1>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- rng@22000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x20>;
- switch_wan_bmp = <0x00>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_red: red {
- label = "dap-2610:red:power";
- gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- };
-
- led_green: green {
- label = "dap-2610:green:power";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fixed-partitions";
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- partition@180000 {
- compatible = "wrg";
- label = "firmware";
- reg = <0x180000 0xdc0000>;
- };
- partition@fb0000 {
- label = "rgbd";
- reg = <0xfb0000 0x10000>;
- read-only;
- };
- partition@fc0000 {
- label = "bdcfg";
- reg = <0xfc0000 0x10000>;
- read-only;
- };
- partition@fd0000 {
- label = "langpack";
- reg = <0xfd0000 0x20000>;
- read-only;
- };
- partition@ff0000 {
- label = "certificate";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- partition@f40000 {
- label = "captival";
- reg = <0xf40000 0x70000>;
- read-only;
- };
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x20>;
-};
-
-&mdio {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "dlink,dap-2610";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "dlink,dap-2610";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Linksys EA6350v3";
- compatible = "linksys,ea6350v3";
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: status {
- label = "EA6350v3:green:status";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "linksys-ea6350v3";
-};
-
-
-&blsp_dma {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
- <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- MBIB@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- QSEE@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- CDT@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- APPSBLENV@d0000 {
- label = "APPSBLENV";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- APPSBL@e0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000e0000 0x00080000>;
- read-only;
- };
- ART@160000 {
- label = "ART";
- reg = <0x00160000 0x00010000>;
- read-only;
- };
- u_env@170000 {
- label = "u_env";
- reg = <0x00170000 0x00020000>;
- };
- s_env@190000 {
- label = "s_env";
- reg = <0x00190000 0x00020000>;
- };
- devinfo@1b0000 {
- label = "devinfo";
- reg = <0x001b0000 0x00010000>;
- };
- /* 0x001c0000 - 0x00200000 unused */
- };
- };
-
- flash@1 {
- status = "okay";
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- kernel@0 {
- label = "kernel";
- reg = <0x00000000 0x02800000>;
- };
- rootfs@300000 {
- label = "rootfs";
- reg = <0x00300000 0x02500000>;
- };
- alt_kernel@2800000 {
- label = "alt_kernel";
- reg = <0x02800000 0x02800000>;
- };
- alt_rootfs@2b00000 {
- label = "alt_rootfs";
- reg = <0x02b00000 0x02500000>;
- };
- sysdiag@5000000 {
- label = "sysdiag";
- reg = <0x05000000 0x00100000>;
- };
- syscfg@5100000 {
- label = "syscfg";
- reg = <0x05100000 0x02F00000>;
- };
- /* 0x00000000 - 0x08000000: 128 MiB */
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EnGenius EAP1300";
- compatible = "engenius,eap1300";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: orange {
- label = "eap1300:orange:power";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
-
- lan {
- label = "eap1300:blue:lan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
-
- mesh {
- label = "eap1300:blue:mesh";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "eap1300:blue:wlan2g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g {
- label = "eap1300:yellow:wlan5g";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio54", "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "0:APPSBL";
- reg = <0x000f0000 0x00090000>;
- read-only;
- };
- partition7@180000 {
- label = "0:ART";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
- partition8@190000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x190000 0x1dc0000>;
- };
- partition9@1f50000 {
- label = "u-boot-env";
- reg = <0x01f50000 0x00010000>;
- };
- partition10@1f60000 {
- label = "userconfig";
- reg = <0x01f60000 0x000a0000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EnGenius EMD1";
- compatible = "engenius,emd1";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x20>;
- switch_wan_bmp = <0x00>;
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "emd1:white:power";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "emd1:red:wlan2g";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "emd1:blue:wlan5g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- mesh {
- label = "emd1:orange:mesh";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio54", "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "0:APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition7@170000 {
- label = "0:ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition8@180000 {
- label = "userconfig";
- reg = <0x00180000 0x00080000>;
- read-only;
- };
- partition9@200000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x200000 0x01e00000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x20>;
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EMD1";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EMD1";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EnGenius EMR3500";
- compatible = "engenius,emr3500";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2_hs_phy: hsphy@a8000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: white {
- label = "emr3500:white:power";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- };
-
- blue {
- label = "emr3500:blue";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
-
- red {
- label = "emr3500:red";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- };
-
- orange {
- label = "emr3500:orange";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio54", "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition@170000 {
- label = "0:ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition@180000 {
- label = "userconfig";
- reg = <0x00180000 0x00080000>;
- read-only;
- };
- partition@200000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x200000 0x1e00000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- vlan_tag = <2 0x20>;
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "EnGenius ENS620EXT";
- compatible = "engenius,ens620ext";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- /*
- * Disable the broken restart as a workaround for the buggy
- * 3.0.0/3.0.1 U-boots that ship with the device.
- * Note: The watchdog is now used to restart this device.
- */
- restart@4ab000 {
- status = "disabled";
- };
- };
-
- buttons {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "ens620ext:amber:power";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "ens620ext:green:lan1";
- gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "ens620ext:green:lan2";
- gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- };
-
- wlan2G {
- label = "ens620ext:green:wlan2G";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5G {
- label = "ens620ext:green:wlan5G";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition@e0000 {
- label = "APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00090000>;
- read-only;
- };
- partition@180000 {
- label = "ART";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
- partition@190000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x00190000 0x14d0000>;
- };
- partition@1660000 {
- label = "failsafe";
- reg = <0x01660000 0x008F0000>;
- read-only;
- };
- partition@1f50000 {
- label = "u-boot-env";
- reg = <0x01f50000 0x00010000>;
- read-only;
- };
- partition@1f60000 {
- label = "userconfig";
- reg = <0x01f60000 0x000a0000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear EX6100v2";
- compatible = "netgear,ex6100v2";
-};
-
-&wifi0 {
- qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
-
-&wifi1 {
- qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4018-ex61x0v2.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear EX6150v2";
- compatible = "netgear,ex6150v2";
-};
-
-&wifi0 {
- qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
-
-&wifi1 {
- qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Netgear EX61X0v2";
- compatible = "netgear,ex61x0v2";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- aliases {
- led-boot = &power_amber;
- led-failsafe = &power_amber;
- led-running = &power_green;
- led-upgrade = &power_amber;
- label-mac-device = &gmac0;
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- num-chipselects = <0>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_amber: power_amber {
- label = "ex61x0v2:amber:power";
- gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power_green {
- label = "ex61x0v2:green:power";
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- right {
- label = "ex61x0v2:blue:right";
- gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
- };
-
- left {
- label = "ex61x0v2:blue:left";
- gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
- };
-
- client_green {
- label = "ex61x0v2:green:client";
- gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- client_red {
- label = "ex61x0v2:red:client";
- gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- router_green {
- label = "ex61x0v2:green:router";
- gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- router_red {
- label = "ex61x0v2:red:router";
- gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "ex61x0v2:green:wps";
- gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l12805d@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition5@E0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition6@F0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition7@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition8@180000 {
- label = "config";
- reg = <0x00180000 0x00010000>;
- read-only;
- };
-
- partition9@190000 {
- label = "pot";
- reg = <0x00190000 0x00010000>;
- read-only;
- };
-
- partition10@1a0000 {
- label = "dnidata";
- reg = <0x001a0000 0x00010000>;
- read-only;
- };
-
- partition11@1b0000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x001b0000 0x00e10000>;
- };
-
- partition12@fc0000 {
- label = "language";
- reg = <0x00fc0000 0x00040000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Box 4040";
- compatible = "avm,fritzbox-4040";
-
- aliases {
- led-boot = &power;
- led-failsafe = &flash;
- led-running = &power;
- led-upgrade = &flash;
- label-mac-device = &gmac0;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- qca8075: ess-switch@c000000 {
- status = "okay";
-
- #gpio-cells = <2>;
- gpio-controller;
-
- enable-usb-power {
- gpio-hog;
- line-name = "enable USB3 power";
- gpios = <7 GPIO_ACTIVE_HIGH>;
- output-high;
- };
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- switch-leds {
- compatible = "gpio-leds";
-
- wlan {
- label = "fritz4040:green:wlan";
- gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
- };
-
- panic: info_red {
- label = "fritz4040:red:info";
- gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- wan {
- label = "fritz4040:green:wan";
- gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "fritz4040:green:power";
- gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
- };
-
- lan {
- label = "fritz4040:green:lan";
- gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
- };
-
- flash: info_amber {
- label = "fritz4040:amber:info";
- gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- status = "okay";
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "APPSBLENV"; /* uboot env - empty */
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "urlader"; /* APPSBL */
- reg = <0x000f0000 0x0002dc000>;
- read-only;
- };
- partition7@11dc00 {
- /* make a backup of this partition! */
- label = "urlader_config";
- reg = <0x0011dc00 0x00002400>;
- read-only;
- };
- partition8@120000 {
- label = "tffs1";
- reg = <0x00120000 0x00080000>;
- read-only;
- };
- partition9@1a0000 {
- label = "tffs2";
- reg = <0x001a0000 0x00080000>;
- read-only;
- };
- partition10@220000 {
- label = "uboot";
- reg = <0x00220000 0x00080000>;
- read-only;
- };
- partition11@2A0000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x002a0000 0x01c60000>;
- };
- partition12@1f00000 {
- label = "jffs2";
- reg = <0x01f00000 0x00100000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
-
-#include "qcom-ipq4018-jalapeno.dtsi"
-
-/ {
- model = "8devices Jalapeno";
- compatible = "8dev,jalapeno";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- status = "okay";
-
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>; /* lan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- pinmux_1 {
- pins = "gpio53";
- function = "mdio";
- };
-
- pinmux_2 {
- pins = "gpio52";
- function = "mdc";
- };
-
- pinconf {
- pins = "gpio52", "gpio53";
- bias-pull-up;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <2>;
- bias-disable;
- };
-
- pin_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- status = "okay";
-
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition@e0000 {
- label = "APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- };
- };
-
- spi-nand@1 {
- status = "okay";
-
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ubi";
- reg = <0x00000000 0x08000000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,poll_required = <1>;
- qcom,poll_required_dynamic = <1>;
- qcom,phy_mdio_addr = <3>;
- vlan_tag = <1 0x10>;
-};
-
-&gmac1 {
- qcom,poll_required = <1>;
- qcom,poll_required_dynamic = <1>;
- qcom,phy_mdio_addr = <4>;
- vlan_tag = <2 0x20>;
-};
-
-&wifi0 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&wifi1 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "8devices-Jalapeno";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o.
- * Author: Robert Marko <robert@meshpoint.me>
- */
-
-#include "qcom-ipq4018-jalapeno.dtsi"
-
-/ {
- model = "Crisis Innovation Lab MeshPoint.One";
- compatible = "cilab,meshpoint-one";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- soc {
- i2c-gpio {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "i2c-gpio";
- gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
- &tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */
- >;
-
- bme280@76 {
- status = "okay";
-
- compatible = "bosch,bme280";
- reg = <0x76>;
- };
-
- pcf2129@51 {
- status = "okay";
-
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
- ina230@40 {
- status = "okay";
-
- compatible = "ti,ina230";
- reg = <0x40>;
- shunt-resistor = <2000>;
- };
-
- ina230@44 {
- status = "okay";
-
- compatible = "ti,ina230";
- reg = <0x44>;
- shunt-resistor = <2000>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART >;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "meshpoint-one:blue:status";
- gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ZyXEL NBG6617";
- compatible = "zyxel,nbg6617";
-
- chosen {
- /*
- * the vendor u-boot adds root and mtdparts cmdline parameters
- * which we don't want... but we have to overwrite them or else
- * the kernel will take them at face value.
- */
- bootargs-append = " mtdparts= root=31:13";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- power: power {
- label = "nbg6617:green:power";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "nbg6617:green:usb";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
- linux,default-trigger = "usbport";
- };
-
- wlan2G {
- label = "nbg6617:green:wlan2G";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5G {
- label = "nbg6617:green:wlan5G";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "nbg6617:green:wps";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
- };
- led_pins: led_pinmux {
- mux {
- pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
- drive-strength = <0x8>;
- bias-disable;
- output-low;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l25635f@0 {
- compatible = "mx25l25635f", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- status = "okay";
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "APPSBL"; /* u-boot */
- reg = <0x000e0000 0x00080000>;
- /* U-Boot Standalone App "zloader" is located at 0x64000 */
- read-only;
- };
- partition6@160000 {
- label = "APPSBLENV"; /* u-boot env */
- reg = <0x00160000 0x00010000>;
- };
- partition7@170000 {
- /* make a backup of this partition! */
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition8@180000 {
- label = "kernel";
- reg = <0x00180000 0x00400000>;
- };
- partition9@580000 {
- label = "dualflag";
- reg = <0x00580000 0x00010000>;
- read-only;
- };
- partition10@590000 {
- label = "header";
- reg = <0x00590000 0x00010000>;
- };
- partition11@5a0000 {
- label = "romd";
- reg = <0x005a0000 0x00100000>;
- read-only;
- };
- partition12@6a0000 {
- label = "not_root_data";
- /*
- * for some strange reason, someone at ZyXEL
- * had the "great" idea to put the rootfs_data
- * in front of rootfs... Don't do that!
- * As a result this one, full MebiByte remains
- * unused.
- */
- reg = <0x006a0000 0x00100000>;
- };
- partition13@7a0000 {
- label = "rootfs";
- reg = <0x007a0000 0x01860000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ASUS RT-AC58U";
- compatible = "asus,rt-ac58u";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x8000000>;
- };
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- chosen {
- bootargs-append = " ubi.mtd=UBI_DEV";
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: status {
- label = "rt-ac58u:blue:status";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "rt-ac58u:blue:wan";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2G {
- label = "rt-ac58u:blue:wlan2G";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5G {
- label = "rt-ac58u:blue:wlan5G";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- usb {
- label = "rt-ac58u:blue:usb";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- trigger-sources = <&usb3_port1>, <&usb3_port2>;
- linux,default-trigger = "usbport";
- };
-
- lan {
- label = "rt-ac58u:blue:lan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- mux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- mux_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp1_spi1 { /* BLSP1 QUP1 */
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
- <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- /*
- * U-boot looks for "n25q128a11" node,
- * if we don't have it, it will spit out the following warning:
- * "ipq: fdt fixup unable to find compatible node".
- */
- compatible = "jedec,spi-nor";
- reg = <0>;
- linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
- spi-max-frequency = <30000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition@e0000 {
- label = "APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- /* 0x00180000 - 0x00200000 unused */
- };
- };
-
- spi-nand@1 {
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <30000000>;
-
- /*
- * U-boot looks for "spinand,mt29f" node,
- * if we don't have it, it will spit out the following warning:
- * "ipq: fdt fixup unable to find compatible node".
- */
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- /*
- * TODO: change to label = "ubi" once we drop 4.14.
- * also drop the bootargs-append and all the
- * userspace CI_UBIPART="UBI_DEV" remains.
- */
- label = "UBI_DEV";
- reg = <0x00000000 0x08000000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "RT-AC58U";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "RT-AC58U";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ZyXEL WRE6606";
- compatible = "zyxel,wre6606";
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- bootargs-append = " mtdparts=";
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wps {
- label = "wre6606:green:wps";
- gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_green {
- label = "wre6606:green:wlan5g";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "wre6606:green:power";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_red {
- label = "wre6606:red:wlan5g";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_red {
- label = "wre6606:red:wlan2g";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_green {
- label = "wre6606:green:wlan2g";
- gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l12805d@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
-
- partition1@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
-
- partition2@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
-
- partition3@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
-
- partition4@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
-
- partition5@E0000 {
- label = "APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
-
- partition6@F0000 {
- label = "APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
-
- partition7@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
-
- partition8@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x00180000 0x00ce0000>;
- };
-
- partition9@e60000 {
- label = "manufacture";
- reg = <0x00e60000 0x00050000>;
- read-only;
- };
-
- partition10@eb0000 {
- label = "storage";
- reg = <0x00eb0000 0x00150000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "OpenMesh A62";
- compatible = "openmesh,a62";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART >;
- };
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- leds {
- compatible = "gpio-leds";
-
- red {
- label = "a62:red:status";
- gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
-
- power: green {
- label = "a62:green:status";
- gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- };
-
- blue {
- label = "a62:blue:status";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-off";
- };
- };
-
- watchdog {
- compatible = "linux,wdt-gpio";
- gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- hw_algo = "toggle";
- /* hw_margin_ms is actually 300s but driver limits it to 60s */
- hw_margin_ms = <60000>;
- always-running;
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- enable-usb-power {
- gpio-hog;
- gpios = <58 GPIO_ACTIVE_HIGH>;
- output-low;
- line-name = "enable USB2 power";
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- /* partitions are passed via bootloader */
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "OM-A62";
- ieee80211-freq-limit = <5170000 5350000>;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A62";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "OM-A62";
- ieee80211-freq-limit = <5470000 5875000>;
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019-ap.dk04.1.dtsi"
-
-/ {
- model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
- compatible = "qcom,ipq4019";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- pinctrl@1000000 {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- };
- pinconf {
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- pinmux {
- function = "blsp_i2c0";
- pins = "gpio10", "gpio11";
- };
- pinconf {
- pins = "gpio10", "gpio11";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
-
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
- };
-
- blsp_dma: dma@7884000 {
- status = "okay";
- };
-
- spi0: spi@78b5000 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- mx25l25635e@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- compatible = "mx25l25635e";
- spi-max-frequency = <24000000>;
- };
- };
-
- i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- usb3_ss_phy: ssphy@9a000 {
- status = "okay";
- };
-
- usb3_hs_phy: hsphy@a6000 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- usb2_hs_phy: hsphy@a8000 {
- status = "okay";
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- cryptobam: dma@8e04000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- qpic_bam: dma@7984000 {
- status = "okay";
- };
-
- nand: qpic-nand@79b0000 {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "MobiPromo CM520-79F";
- compatible = "mobipromo,cm520-79f";
-
- aliases {
- led-boot = &led_sys;
- led-failsafe = &led_sys;
- led-running = &led_sys;
- led-upgrade = &led_sys;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <1000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- ranges;
-
- sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
- num-chipselects = <0>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- usb {
- label = "cm520-79f:blue:usb";
- gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbport";
- trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
- };
-
- led_sys: can {
- label = "cm520-79f:blue:can";
- gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "cm520-79f:blue:wan";
- gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "cm520-79f:blue:lan1";
- gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "cm520-79f:blue:lan2";
- gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "cm520-79f:blue:wlan2g";
- gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "cm520-79f:blue:wlan5g";
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- status = "okay";
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- mtd-mac-address = <&art 0x1006>;
-};
-
-&gmac1 {
- mtd-mac-address = <&art 0x5006>;
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "MIBIB";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "BOOTCONFIG";
- reg = <0x200000 0x100000>;
- };
-
- partition@300000 {
- label = "QSEE";
- reg = <0x300000 0x100000>;
- read-only;
- };
-
- partition@400000 {
- label = "QSEE_1";
- reg = <0x400000 0x100000>;
- read-only;
- };
-
- partition@500000 {
- label = "CDT";
- reg = <0x500000 0x80000>;
- read-only;
- };
-
- partition@580000 {
- label = "CDT_1";
- reg = <0x580000 0x80000>;
- read-only;
- };
-
- partition@600000 {
- label = "BOOTCONFIG1";
- reg = <0x600000 0x80000>;
- };
-
- partition@680000 {
- label = "APPSBLENV";
- reg = <0x680000 0x80000>;
- };
-
- partition@700000 {
- label = "APPSBL";
- reg = <0x700000 0x200000>;
- read-only;
- };
-
- partition@900000 {
- label = "APPSBL_1";
- reg = <0x900000 0x200000>;
- read-only;
- };
-
- art: partition@b00000 {
- label = "ART";
- reg = <0xb00000 0x80000>;
- read-only;
- };
-
- partition@b80000 {
- label = "ubi";
- reg = <0xb80000 0x7480000>;
- };
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "CM520-79F";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "CM520-79F";
-};
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Qxwlan E2600AC c1";
- compatible = "qxwlan,e2600ac-c1";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- partition@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x180000 0x1e80000>;
- };
- };
- };
-};
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019-e2600ac.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Qxwlan E2600AC c2";
- compatible = "qxwlan,e2600ac-c2";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "ubi";
- reg = <0x00000000 0x04000000>;
- };
- };
- };
-};
-
-&tlmm {
- nand_pins: nand-pins {
-
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-
- model = "Qxwlan E2600AC";
- compatible = "qcom,ipq4019";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256MB */
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- i2c@78b7000 { /* BLSP1 QUP2 */
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led1 {
- label = "e2600ac:green:wlan0";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- led2 {
- label = "e2600ac:green:wlan1";
- gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
- };
-
- led3 {
- label = "e2600ac:green:usb";
- gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
- trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
- linux,default-trigger = "usbport";
- };
-
- led4 {
- label = "e2600ac:green:ctrl1";
- gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
- };
-
- led5 {
- label = "e2600ac:green:ctrl2";
- gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
- };
-
- led6 {
- label = "e2600ac:green:ctrl3";
- gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- i2c_0_pins: i2c-0-pinmux {
- mux {
- pins = "gpio20", "gpio21";
- function = "blsp_i2c0";
- bias-disable;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial0-pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/*
- * Device Tree Source for Linksys EA8300 (Dallas)
- *
- * Copyright (C) 2019 Jeff Kletsky
- *
- */
-
-/dts-v1/;
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Linksys EA8300 (Dallas)";
- compatible = "linksys,ea8300", "qcom,ipq4019";
-
-
- aliases {
- led-boot = &led_wps_amber;
- led-failsafe = &led_wps;
- led-running = &led_linksys;
- led-upgrade = &led_world;
- serial0 = &blsp1_uart1;
- };
-
-
- leds {
- compatible = "gpio-leds";
-
- // Retain node names from running OEM on EA8300
-
- // Front panel LEDs, top to bottom
-
- led_plug: diag {
- label = "ea8300:amber:plug";
- gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
- };
-
- led_world: internet {
- label = "ea8300:amber:world";
- gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
- };
-
- led_wps: wps {
- label = "ea8300:white:wps";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- };
-
- led_wps_amber: wps_amber {
- label = "ea8300:amber:wps";
- gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- led_linksys: pwr {
- label = "ea8300:white:linksys";
- gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- };
-
- // On back panel, above USB socket
-
- led_usb: usb {
- label = "ea8300:green:usb";
- gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
- trigger-sources = <&usb3_port1>, <&usb3_port2>,
- <&usb2_port1>;
- linux,default-trigger = "usbport";
- };
- };
-
-
- keys {
- compatible = "gpio-keys";
-
- button@0 {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- button@1 {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- };
- };
-
-
- //
- // OEM U-Boot provides either
- // init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \
- // root=ubi0:ubifs rootwait rw
- // or the same with ubi.mtd=13,2048
- //
-
- chosen {
- bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
- };
-
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb2_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb3_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- usb3_port2: port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- status = "okay";
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
-
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x100000>;
- read-only;
- };
-
- partition@100000 {
- label = "mibib";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "qsee";
- reg = <0x200000 0x100000>;
- read-only;
- };
-
- partition@300000 {
- label = "cdt";
- reg = <0x300000 0x80000>;
- read-only;
- };
-
- partition@380000 {
- label = "appsblenv";
- reg = <0x380000 0x80000>;
- read-only;
- };
-
- partition@400000 {
- label = "ART";
- reg = <0x400000 0x80000>;
- read-only;
- };
-
- partition@480000 {
- label = "appsbl";
- reg = <0x480000 0x200000>;
- read-only;
- };
-
- partition@680000 {
- label = "u_env";
- reg = <0x680000 0x80000>;
- // writable -- U-Boot environment
- };
-
- partition@700000 {
- label = "s_env";
- reg = <0x700000 0x40000>;
- // writable -- Boot counter records
- };
-
- partition@740000 {
- label = "devinfo";
- reg = <0x740000 0x40000>;
- read-only;
- };
-
- partition@780000 {
- label = "kernel";
- reg = <0x780000 0x5800000>;
- };
-
- partition@a80000 {
- label = "rootfs";
- reg = <0xa80000 0x5500000>;
- };
-
- partition@5f80000 {
- label = "alt_kernel";
- reg = <0x5f80000 0x5800000>;
- };
-
- partition@6280000 {
- label = "alt_rootfs";
- reg = <0x6280000 0x5500000>;
- };
-
- partition@b780000 {
- label = "sysdiag";
- reg = <0xb780000 0x100000>;
- read-only;
- };
-
- partition@b880000 {
- label = "syscfg";
- reg = <0xb880000 0x4680000>;
- read-only;
- };
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- serial_0_pins: serial0-pinmux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- // gpio61 controls led_usb
-
- pulldowns {
- pins = "gpio55", "gpio56", "gpio57",
- "gpio60", "gpio62", "gpio63",
- "gpio64", "gpio65", "gpio66",
- "gpio67", "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
-
-&wifi1 {
- status = "okay";
- ieee80211-freq-limit = <5170000 5330000>;
- qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
-
-&wifi2 {
- status = "okay";
- ieee80211-freq-limit = <5490000 5835000>;
- qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "EnGenius EAP2200";
- compatible = "engenius,eap2200";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power {
- label = "eap2200:amber:power";
- gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
- };
-
- lan1 {
- label = "eap2200:blue:lan1";
- gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
- };
-
- lan2 {
- label = "eap2200:blue:lan2";
- gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
- };
-
- wlan2g {
- label = "eap2200:blue:wlan2g";
- gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "eap2200:yellow:wlan5g";
- gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- wlan5g2 {
- label = "eap2200:yellow:wlan5g2";
- gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy2tpt";
- };
-
- mode {
- label = "eap2200:blue:mode";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x10>;
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV";
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition6@f0000 {
- label = "0:APPSBL";
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition7@170000 {
- label = "0:ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- vlan_tag = <1 0x10>;
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "rootfs1";
- reg = <0x00000000 0x04000000>;
- };
- partition@40000000 {
- label = "ubi";
- reg = <0x04000000 0x04000000>;
- };
-
- };
- };
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- reg = <0x00010000 0 0 0 0>;
- ieee80211-freq-limit = <5470000 5875000>;
- qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
-};
-
-&wifi1 {
- status = "okay";
- ieee80211-freq-limit = <5170000 5350000>;
- qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Box 7530";
- compatible = "avm,fritzbox-7530";
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &info_red;
- led-running = &power_green;
- led-upgrade = &info_green;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- qcom,num_gmac = <1>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wlan {
- label = "wlan";
- gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- dect {
- label = "dect";
- gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- info_red: info_red {
- label = "fritzbox-7530:red:info";
- gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
- };
-
- info_green: info {
- label = "fritzbox-7530:green:info";
- gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
- };
-
- wlan {
- label = "fritzbox-7530:green:wlan";
- gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
- };
-
- fon {
- label = "fritzbox-7530:green:fon";
- gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power {
- label = "fritzbox-7530:green:power";
- gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "fritzbox-7530:green:wps";
- gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- usb-power {
- line-name = "enable USB3 power";
- gpios = <49 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x000000 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x080000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "CDT";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "QSEE_B";
- reg = <0x1c0000 0x80000>;
- read-only;
- };
-
- partition@240000 {
- label = "urlader0";
- reg = <0x240000 0x40000>;
- read-only;
- };
-
- partition@280000 {
- label = "urlader1";
- reg = <0x280000 0x40000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "nand-tffs";
- reg = <0x2c0000 0x840000>;
- read-only;
- };
-
- partition@b00000 {
- /* 'kernel1' in AVM firmware */
- label = "uboot0";
- reg = <0xb00000 0x400000>;
- };
-
- partition@f00000 {
- /* 'kernel2' in AVM firmware */
- label = "uboot1";
- reg = <0xf00000 0x400000>;
- };
-
- partition@1300000 {
- label = "ubi";
- reg = <0x1300000 0x6d00000>;
- };
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- dsl@1,0 {
- compatible = "intel,vrx518";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Repeater 1200";
- compatible = "avm,fritzrepeater-1200";
-
- aliases {
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_red;
- label-mac-device = &wifi0;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- status = "okay";
- phy-mode = "rgmii-rxid";
- qcom,num_gmac = <1>;
- qcom,single-phy;
- };
- };
-
- key {
- compatible = "gpio-keys";
-
- wps {
- label = "WPS button";
- gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_red: power_red {
- label = "fritzwlan-1200:red:power";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- power_green: power_green {
- label = "fritzwlan-1200:green:power";
- gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
- };
-
- power_yellow {
- label = "fritzwlan-1200:yellow:power";
- gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- phy-reset {
- line-name = "PHY-reset";
- gpios = <19 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-
- phy-reset-2 {
- line-name = "PHY-reset-2";
- gpios = <47 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "CDT";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "QSEE_B";
- reg = <0x1c0000 0x80000>;
- read-only;
- };
-
- partition@240000 {
- label = "urlader0";
- reg = <0x240000 0x40000>;
- read-only;
- };
-
- partition@280000 {
- label = "urlader1";
- reg = <0x280000 0x40000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "nand-tffs";
- reg = <0x2c0000 0x840000>;
- read-only;
- };
-
- partition@b00000 {
- /* 'kernel1' in AVM firmware */
- label = "uboot0";
- reg = <0xb00000 0x400000>;
- };
-
- partition@f00000 {
- /* 'kernel2' in AVM firmware */
- label = "uboot1";
- reg = <0xf00000 0x400000>;
- };
-
- partition@1300000 {
- label = "ubi";
- reg = <0x1300000 0x6d00000>;
- };
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <0>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "AVM FRITZ!Repeater 3000";
- compatible = "avm,fritzrepeater-3000";
-
- aliases {
- led-boot = &power_led;
- led-failsafe = &power_led;
- led-running = &power_led;
- led-upgrade = &power_led;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
-
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- key {
- compatible = "gpio-keys";
-
- connect {
- label = "Connect";
- gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- connect_red {
- label = "fritzwlan-3000:red:connect";
- gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
- };
-
- connect_green {
- label = "fritzwlan-3000:green:connect";
- gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
- };
-
- connect_blue {
- label = "fritzwlan-3000:blue:connect";
- gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
- };
-
- power_led: power {
- label = "fritzwlan-3000:green:power";
- gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x000000 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x080000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x80000>;
- read-only;
- };
-
- partition@180000 {
- label = "CDT";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "QSEE_B";
- reg = <0x1c0000 0x80000>;
- read-only;
- };
-
- partition@240000 {
- label = "urlader0";
- reg = <0x240000 0x40000>;
- read-only;
- };
-
- partition@280000 {
- label = "urlader1";
- reg = <0x280000 0x40000>;
- read-only;
- };
-
- partition@2c0000 {
- label = "nand-tffs";
- reg = <0x2c0000 0x840000>;
- read-only;
- };
-
- partition@b00000 {
- /* 'kernel1' in AVM firmware */
- label = "uboot0";
- reg = <0xb00000 0x400000>;
- };
-
- partition@f00000 {
- /* 'kernel2' in AVM firmware */
- label = "uboot1";
- reg = <0xf00000 0x400000>;
- };
-
- partition@1300000 {
- label = "ubi";
- reg = <0x1300000 0x6d00000>;
- };
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
-};
-
-&wifi1 {
- status = "okay";
- ieee80211-freq-limit = <5170000 5350000>;
- /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
- qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- /* QCA9984 */
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- ieee80211-freq-limit = <5470000 5875000>;
- /* Uses the reference BDF */
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2019, Robert Marko <robimarko@gmail.com> */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "8devices Habanero DVK";
- compatible = "8dev,habanero-dvk";
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_upgrade;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
-
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- status = "okay";
-
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_status: status {
- label = "habanero-dvk:green:status";
- gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
-
- led_upgrade: upgrade {
- label = "habanero-dvk:green:upgrade";
- gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "habanero-dvk:green:wlan2g";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- label = "habanero-dvk:green:wlan5g";
- gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
- };
-};
-
-&vqmmc {
- status = "okay";
-};
-
-&sdhci {
- status = "okay";
-
- pinctrl-0 = <&sd_pins>;
- pinctrl-names = "default";
- cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&vqmmc>;
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56", "gpio57",
- "gpio60", "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67", "gpio68",
- "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- sd_pins: sd_pins {
- pinmux {
- function = "sdio";
- pins = "gpio23", "gpio24", "gpio25", "gpio26",
- "gpio28", "gpio29", "gpio30", "gpio31";
- drive-strength = <10>;
- };
-
- pinmux_sd_clk {
- function = "sdio";
- pins = "gpio27";
- drive-strength = <16>;
- };
-
- pinmux_sd7 {
- function = "sdio";
- pins = "gpio32";
- drive-strength = <10>;
- bias-disable;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition@40000 {
- label = "MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition@60000 {
- label = "QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition@c0000 {
- label = "CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition@d0000 {
- label = "DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition@e0000 {
- label = "APPSBLENV"; /* uboot env */
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition@f0000 {
- label = "APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition@170000 {
- label = "ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition@180000 {
- label = "cfg";
- reg = <0x00180000 0x00040000>;
- };
- partition@1c0000 {
- label = "firmware";
- compatible = "denx,fit";
- reg = <0x001c0000 0x01e40000>;
- };
- };
- };
-};
-
-/* Some DVK boards ship without NAND */
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- /* Free slot for use */
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- };
-};
-
-&wifi0 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "8devices-Habanero";
-};
-
-&wifi1 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "8devices-Habanero";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/dts-v1/;
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "ASUS Lyra MAP-AC2200";
- compatible = "asus,map-ac2200";
-
- aliases {
- led-boot = &led_blue0;
- led-failsafe = &led_red0;
- led-running = &led_blue0;
- led-upgrade = &led_red0;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SBL1";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "MIBIB";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- partition@100000 {
- label = "QSEE";
- reg = <0x100000 0x100000>;
- read-only;
- };
-
- partition@200000 {
- label = "CDT";
- reg = <0x200000 0x80000>;
- read-only;
- };
-
- partition@280000 {
- label = "APPSBL";
- reg = <0x280000 0x140000>;
- read-only;
- };
-
- partition@3c0000 {
- label = "APPSBLENV";
- reg = <0x3c0000 0x40000>;
- read-only;
- };
-
- partition@400000 {
- label = "ubi";
- reg = <0x400000 0x7c00000>;
- };
- };
- };
-};
-
-&tlmm {
- i2c_0_pins: i2c_0_pinmux {
- pinmux {
- function = "blsp_i2c0";
- pins = "gpio20", "gpio21";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
- ieee80211-freq-limit = <5470000 5875000>;
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
- ieee80211-freq-limit = <5170000 5350000>;
- };
- };
-};
-
-&usb2_hs_phy {
- /* Bluetooth module attached via USB */
- status = "okay";
-};
-
-&blsp1_i2c3 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- led-controller@32 {
- /* 9-channel RGB LED controller */
- compatible = "national,lp5523";
- reg = <0x32>;
- clock-mode = [01];
-
- led_blue0: blue0 {
- chan-name = "blue0";
- label = "map-ac2200:blue:chan0";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- blue1 {
- chan-name = "blue1";
- label = "map-ac2200:blue:chan1";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- blue2 {
- chan-name = "blue2";
- label = "map-ac2200:blue:chan2";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- led_green0: green0 {
- chan-name = "green0";
- label = "map-ac2200:green:chan0";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- green1 {
- chan-name = "green1";
- label = "map-ac2200:green:chan1";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- green2 {
- chan-name = "green2";
- label = "map-ac2200:green:chan2";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- led_red0: red0 {
- chan-name = "red0";
- label = "map-ac2200:red:chan0";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- red1 {
- chan-name = "red1";
- label = "map-ac2200:red:chan1";
- led-cur = [fa];
- max-cur = [ff];
- };
-
- red2 {
- chan-name = "red2";
- label = "map-ac2200:red:chan2";
- led-cur = [fa];
- max-cur = [ff];
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: ISC
-// Copyright (c) 2015, The Linux Foundation. All rights reserved.
-// Copyright (c) 2019, Cezary Jackiewicz <cezary@eko.one.pl>.
-// Copyright (c) 2020, Pawel Dembicki <paweldembicki@gmail.com>.
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/soc/qcom,tcsr.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Cell C RTL30VW";
- compatible = "cellc,rtl30vw";
-
- aliases {
- led-boot = &led_power_blue;
- led-failsafe = &led_power_red;
- led-running = &led_power_blue;
- led-upgrade = &led_power_red;
- };
-
- chosen {
- bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro";
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- num-chipselects = <1>;
-
- mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
- sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
-
- led_gpio: led_gpio@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <2>;
- spi-max-frequency = <1000000>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_blue: power_blue {
- gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:power";
- default-state = "on";
- };
-
- led_power_red: power_red {
- gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:red:power";
- };
-
- tp28 {
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- label = "rtl30vw:ext:tp28";
- default-state = "keep";
- };
-
- tp27 {
- gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- label = "rtl30vw:ext:tp27";
- default-state = "keep";
- };
-
- wlan2g {
- gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wlan2g";
- linux,default-trigger = "phy0tpt";
- };
-
- wlan5g {
- gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wlan5g";
- linux,default-trigger = "phy1tpt";
- };
-
- wps {
- gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:wps";
- };
-
- voip {
- gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:voip";
- };
-
- s1 {
- gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s1";
- };
-
- s2 {
- gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s2";
- };
-
- s3 {
- gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s3";
- };
-
- s4 {
- gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:blue:s4";
- };
-
- signal {
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- label = "rtl30vw:red:signal";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- /*"n25q128a11" is required for proper nand recognition in u-boot. */
- compatible = "jedec,spi-nor", "n25q128a11";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
-
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- partition@180000 {
- label = "0:BOOTCONFIG";
- reg = <0x180000 0x10000>;
- read-only;
- };
- };
- };
-
- flash@1 {
- /*
- * Factory U-boot looks in 0:BOOTCONFIG partition for active
- * partitions settings and mangle partition config. So kernel
- * /kernel_1 and rootfs/rootfs_1 pairs can be swaped.
- * It isn't a problem but we never can be sure where OFW put
- * factory images. "spinand,mt29f" value is required for proper
- * nand recognition in u-boot.
- */
- compatible = "spi-nand","spinand,mt29f";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "kernel";
- reg = <0x0 0x400000>;
- };
-
- partition@400000 {
- label = "rootfs";
- reg = <0x400000 0x2000000>;
- };
-
- partition@2400000 {
- label = "kernel_1";
- reg = <0x2400000 0x400000>;
- };
-
- partition@2800000 {
- label = "rootfs_1";
- reg = <0x2800000 0x2000000>;
- };
-
- partition@4800000 {
- label = "ubifs";
- reg = <0x4800000 0x3800000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio54", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "cellc,rtl30vw";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "cellc,rtl30vw";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-
-#include "qcom-ipq4019-u4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Unielec U4019 (32M)";
- compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
- broken-flash-reset;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
- partition@60000 {
- label = "0:QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
- partition@c0000 {
- label = "0:CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
- partition@e0000 {
- label = "0:APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
- partition@f0000 {
- label = "0:APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
- partition@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x180000 0x1e80000>;
- };
- };
- };
-};
-
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- compatible = "unielec,u4019","qcom,ipq4019";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
-
- dwc3@6000000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- usb3@8af8800 {
- status = "okay";
-
- dwc3@8a00000 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-
- port@2 {
- reg = <2>;
- #trigger-source-cells = <0>;
- };
- };
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- serial0 = &blsp1_uart1;
- serial1 = &blsp1_uart2;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_status: led2 {
- label = "u4019:green:led2";
- gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial0-pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- led_pins: led_pinmux {
- mux {
- function = "gpio";
- pins = "gpio68";
- bias-disabled;
- output-low;
- };
- };
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Compex WPJ419";
- compatible = "compex,wpj419", "qcom,ipq4019";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- reserved-memory {
- ranges;
- rsvd1@87000000 {
- /* Reserved for other subsystem */
- reg = <0x87000000 0x500000>;
- no-map;
- };
- wifi_dump@87500000 {
- reg = <0x87500000 0x600000>;
- no-map;
- };
-
- rsvd2@87B00000 {
- /* Reserved for other subsystem */
- reg = <0x87B00000 0x500000>;
- no-map;
- };
- };
-
- chosen {
- bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
- };
-
- soc {
- pinctrl@1000000 {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- pins = "gpio8", "gpio9", "gpio10", "gpio11";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- bias-disable;
- };
-
- pinmux_cs {
- function = "gpio";
- pins = "gpio12";
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio20", "gpio21";
- function = "blsp_i2c0";
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio52", "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- led_0_pins: led0_pinmux {
- mux_1 {
- pins = "gpio36";
- function = "led0";
- bias-pull-down;
- };
- mux_2 {
- pins = "gpio40";
- function = "led4";
- bias-pull-down;
- };
- };
- };
-
- blsp_dma: dma@7884000 {
- status = "okay";
- };
-
- spi_0: spi@78b5000 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
- num-cs = <2>;
-
- flash0@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <24000000>;
- broken-flash-reset;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "0:SBL1";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "0:MIBIB";
- reg = <0x040000 0x020000>;
- read-only;
- };
-
- partition@60000 {
- label = "0:QSEE";
- reg = <0x060000 0x060000>;
- read-only;
- };
-
- partition@c0000 {
- label = "0:CDT";
- reg = <0x0c0000 0x010000>;
- read-only;
- };
-
- partition@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x0d0000 0x010000>;
- read-only;
- };
-
- partition@e0000 {
- label = "u-boot-env";
- reg = <0x0e0000 0x010000>;
- };
-
- partition@f0000 {
- label = "u-boot";
- reg = <0x0f0000 0x080000>;
- read-only;
- };
-
- partition@170000 {
- label = "0:ART";
- reg = <0x170000 0x010000>;
- read-only;
- };
- };
- };
-
- nand@1 {
- reg = <1>;
- status = "okay";
- compatible = "spi-nand";
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* The device has 128MB, but we can only address
- * 64MB because of the bootloader's default settings.
- * This is due to the old mt29f driver,
- * which detected the deivce with only 64MB
- */
- partition@0 {
- label = "ubi";
- reg = <0x0000000 0x4000000>;
- };
- };
- };
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- reset-delay-us = <5000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- i2c_0: i2c@78b7000 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78af000 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
- usb3_ss_phy: ssphy@9a000 {
- status = "okay";
- };
-
- usb3_hs_phy: hsphy@a6000 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- usb2_hs_phy: hsphy@a8000 {
- status = "okay";
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- cryptobam: dma@8e04000 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x1e>;
- switch_wan_bmp = <0x20>;
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- qpic_bam: dma@7984000 {
- status = "okay";
- };
-
- pcie0: pci@40000000 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
-
- nand: qpic-nand@79b0000 {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
- };
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
- * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Compex WPJ428";
- compatible = "compex,wpj428";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2000>;
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2: usb2@60f8800 {
- status = "okay";
- };
-
- usb3: usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_lan_bmp = <0x10>;
- switch_wan_bmp = <0x20>;
-
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- aliases {
- led-boot = &status;
- led-failsafe = &status;
- led-upgrade = &status;
- };
-
- leds {
- compatible = "gpio-leds";
-
- status: rss4 {
- label = "wpj428:green:rss4";
- gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
- };
-
- rss3 {
- label = "wpj428:green:rss3";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- };
- };
-
- beeper: beeper {
- compatible = "gpio-beeper";
- gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio53";
- function = "mdio";
- bias-pull-up;
- };
-
- mux_2 {
- pins = "gpio52";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition0@0 {
- label = "0:SBL1";
- reg = <0x00000000 0x00040000>;
- read-only;
- };
- partition1@40000 {
- label = "0:MIBIB";
- reg = <0x00040000 0x00020000>;
- read-only;
- };
- partition2@60000 {
- label = "0:QSEE";
- reg = <0x00060000 0x00060000>;
- read-only;
- };
- partition3@c0000 {
- label = "0:CDT";
- reg = <0x000c0000 0x00010000>;
- read-only;
- };
- partition4@d0000 {
- label = "0:DDRPARAMS";
- reg = <0x000d0000 0x00010000>;
- read-only;
- };
- partition5@e0000 {
- label = "0:APPSBLENV"; /* uboot env*/
- reg = <0x000e0000 0x00010000>;
- read-only;
- };
- partition5@f0000 {
- label = "0:APPSBL"; /* uboot */
- reg = <0x000f0000 0x00080000>;
- read-only;
- };
- partition5@170000 {
- label = "0:ART";
- reg = <0x00170000 0x00010000>;
- read-only;
- };
- partition6@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x00180000 0x01e80000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <2 0x20>;
-};
-
-&gmac1 {
- qcom,phy_mdio_addr = <3>;
- qcom,poll_required = <1>;
- qcom,forced_speed = <1000>;
- qcom,forced_duplex = <1>;
- vlan_tag = <1 0x10>;
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
-};
-
-&wifi1 {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Aruba AP-303";
- compatible = "aruba,ap-303";
-
- aliases {
- led-boot = &led_system_green;
- led-failsafe = &led_system_red;
- led-running = &led_system_green;
- led-upgrade = &led_system_red;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi_green {
- label = "ap-303:green:wifi";
- gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wifi_amber {
- label = "ap-303:amber:wifi";
- gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- led_system_red: system_red {
- label = "ap-303:red:system";
- gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_green: system_green {
- label = "ap-303:green:system";
- gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tlmm {
- /*
- * In addition to the Pins listed below,
- * the following GPIOs have "features":
- * 54 - out - active low to force HW reset
- * 41 - out - active low to reset TPM
- * 43 - out - active low to reset BLE radio
- * 19 - in - active high when DC powered
- */
-
- phy-reset {
- line-name = "PHY-reset";
- gpios = <42 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * There is no partition map for the NOR flash
- * in the stock firmware.
- *
- * All partitions here are based on offsets
- * found in the U-Boot GPL code and information
- * from smem.
- */
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "mibib";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "qsee";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "cdt";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "ddrparams";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "ART";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "appsbl";
- reg = <0xf0000 0xf0000>;
- read-only;
- };
-
- partition@1e0000 {
- label = "mfginfo";
- reg = <0x1e0000 0x10000>;
- read-only;
- };
-
- partition@1f0000 {
- label = "apcd";
- reg = <0x1f0000 0x10000>;
- read-only;
- };
-
- partition@200000 {
- label = "osss";
- reg = <0x200000 0x180000>;
- read-only;
- };
-
- partition@380000 {
- /* This is empty */
- label = "appsblenv";
- reg = <0x380000 0x10000>;
- read-only;
- };
-
- partition@390000 {
- label = "pds";
- reg = <0x390000 0x10000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "fcache";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- /* Called osss1 in smem */
- label = "u-boot-env-bak";
- reg = <0x3b0000 0x10000>;
- read-only;
- };
-
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3f0000 0x10000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Aruba AP-303H";
- compatible = "aruba,ap-303h";
-
- aliases {
- led-boot = &led_system_green;
- led-failsafe = &led_system_red;
- led-running = &led_system_green;
- led-upgrade = &led_system_amber;
- };
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
- reset-delay-us = <2000>;
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- };
-
- edma@c080000 {
- status = "okay";
- };
-
- i2c_0: i2c@78b7000 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- tpm@29 {
- /* No Driver */
- compatible = "atmel,at97sc3203";
- reg = <0x29>;
- read-only;
- };
-
- power-monitor@40 {
- /* No driver */
- compatible = "isl,isl28022";
- reg = <0x40>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- wifi_green {
- label = "ap-303h:green:wifi";
- gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wifi_amber {
- label = "ap-303h:amber:wifi";
- gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy1tpt";
- };
-
- pse {
- label = "ap-303h:green:pse";
- gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_red: system_red {
- label = "ap-303h:red:system";
- gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_green: system_green {
- label = "ap-303h:green:system";
- gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
- };
-
- led_system_amber: system_amber {
- label = "ap-303h:amber:system";
- gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset button";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp1_uart2 {
- /* Texas Instruments CC2540T BLE radio */
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- /*
- * In addition to the Pins listed below,
- * the following GPIOs have "features":
- * 39 - out - active low to force HW reset
- * 32 - out - active low to reset TPM
- * 43 - out - active low to reset BLE radio
- * 41 - out - pulse to set warm reset status
- * 34 - out - active low to enable PSE port
- * 22 - in - active low when 802.3at powered
- * 29 - in - active high when DC powered
- * 40 - in - active low when reset due to cold HW reset
- * 30 - in - active low when USB overcurrent detected
- * 35 - in - interrupt line for power monitor chip
- * 31 - in - active low when PSE port active
- */
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio12", "gpio59";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio20", "gpio21";
- function = "blsp_i2c0";
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- serial_0_pins: serial_0_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial_1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- usb-power {
- line-name = "USB-power";
- gpios = <23 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * There is no partition map for the NOR flash
- * in the stock firmware.
- *
- * All partitions here are based on offsets
- * found in the U-Boot GPL code and information
- * from smem.
- */
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "mibib";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "qsee";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "cdt";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "ddrparams";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "appsblenv";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "appsbl";
- reg = <0xf0000 0x100000>;
- read-only;
- };
-
- partition@1e0000 {
- label = "ART";
- reg = <0x1f0000 0x10000>;
- read-only;
- };
-
- partition@1f0000 {
- label = "osss";
- reg = <0x200000 0x170000>;
- read-only;
- };
-
- partition@200000 {
- label = "pds";
- reg = <0x370000 0x10000>;
- read-only;
- };
-
- partition@380000 {
- label = "apcd";
- reg = <0x380000 0x10000>;
- read-only;
- };
-
- partition@390000 {
- label = "mfginfo";
- reg = <0x390000 0x10000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "fcache";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- /* Called osss1 in smem */
- label = "u-boot-env-bak";
- reg = <0x3b0000 0x10000>;
- read-only;
- };
-
- partition@3f0000 {
- label = "u-boot-env";
- reg = <0x3c0000 0x40000>;
- read-only;
- };
- };
- };
-
- flash@1 {
- status = "okay";
-
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- /* 'aos0' in Aruba firmware */
- label = "aos0";
- reg = <0x0 0x2000000>;
- read-only;
- };
-
- partition@2000000 {
- /* 'aos1' in Aruba firmware */
- label = "ubi";
- reg = <0x2000000 0x2000000>;
- };
-
- partition@4000000 {
- label = "aruba-ubifs";
- reg = <0x4000000 0x4000000>;
- read-only;
- };
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Aruba AP-365";
- compatible = "aruba,ap-365";
-
- aliases {
- led-boot = &led_system_green;
- led-failsafe = &led_system_red;
- led-running = &led_system_green;
- led-upgrade = &led_system_red;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_system_red: system_red {
- label = "ap-365:red:system";
- gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
- };
-
- led_system_green: system_green {
- label = "ap-365:green:system";
- gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
- };
-
- system_amber {
- label = "ap-365:amber:system";
- gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
- };
- };
-
- watchdog {
- compatible = "linux,wdt-gpio";
- gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
- hw_algo = "toggle";
- hw_margin_ms = <1000>;
- always-running;
- };
-};
-
-&tlmm {
- /*
- * In addition to the Pins listed below,
- * the following GPIOs have "features":
- * 39 - out - pulse low to reset watchdog status flipflop
- * 40 - out - active high to enable watchdog
- * 41 - out - watchdog poke
- * 42 - out - active low to reset BLE radio
- * 43 - out - active low to reset TPM
- * 47 - out - pulse low to reset warm reset status
- * 54 - out - active low to force HW reset
- * 18 - in - PHY interrupt line
- * 45 - in - power monitor interrupt
- * 48 - in - active low when cold reset
- * 52 - in - active high when watchdog reset
- */
-
- phy-reset {
- line-name = "PHY-reset";
- gpios = <42 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- output-high;
- };
-};
-
-&i2c_0 {
- power-monitor@40 {
- /* No driver */
- compatible = "isl,isl28022";
- reg = <0x40>;
- };
-
- temperature-sensor@48 {
- compatible = "adi,ad7416";
- reg = <0x48>;
- };
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * There is no partition map for the NOR flash
- * in the stock firmware.
- *
- * All partitions here are based on offsets
- * found in the U-Boot GPL code and information
- * from smem.
- */
-
- partition@0 {
- label = "sbl1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "mibib";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "qsee";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- partition@c0000 {
- label = "cdt";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- partition@d0000 {
- label = "ddrparams";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- partition@e0000 {
- label = "u-boot-env";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- partition@f0000 {
- label = "appsbl";
- reg = <0xf0000 0x100000>;
- read-only;
- };
-
- partition@1f0000 {
- label = "ART";
- reg = <0x1f0000 0x10000>;
- read-only;
- };
-
- partition@200000 {
- label = "osss";
- reg = <0x200000 0x170000>;
- read-only;
- };
-
- partition@370000 {
- label = "pds";
- reg = <0x370000 0x10000>;
- read-only;
- };
-
- partition@380000 {
- label = "apcd";
- reg = <0x380000 0x10000>;
- read-only;
- };
-
- partition@390000 {
- label = "mfginfo";
- reg = <0x390000 0x10000>;
- read-only;
- };
-
- partition@3a0000 {
- label = "fcache";
- reg = <0x3a0000 0x10000>;
- read-only;
- };
-
- partition@3b0000 {
- label = "osss1";
- reg = <0x3b0000 0x50000>;
- read-only;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
-
- /delete-node/ ethernet-phy@0;
- /delete-node/ ethernet-phy@2;
- /delete-node/ ethernet-phy@3;
- /delete-node/ ethernet-phy@4;
-
- ethernet-phy@5 {
- reg = <0x5>;
- };
- };
-
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- qcom,single-phy;
- qcom,num_gmac = <1>;
- phy-mode = "rgmii-id";
- status = "okay";
- };
-
- i2c_0: i2c@78b7000 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- tpm@29 {
- /* No Driver */
- compatible = "atmel,at97sc3203";
- reg = <0x29>;
- read-only;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset button";
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- /* Texas Instruments CC2540T BLE radio */
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&blsp1_uart2 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <5>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- nand_pins: nand_pins {
- pullups {
- pins = "gpio53", "gpio58", "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- mux {
- pins = "gpio10", "gpio11";
- function = "blsp_i2c0";
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- serial_0_pins: serial_0_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial_1_pinmux {
- mux {
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- /* 'aos0' in Aruba firmware */
- label = "aos0";
- reg = <0x0 0x2000000>;
- read-only;
- };
-
- partition@2000000 {
- /* 'aos1' in Aruba firmware */
- label = "ubi";
- reg = <0x2000000 0x2000000>;
- };
-
- partition@4000000 {
- label = "aruba-ubifs";
- reg = <0x4000000 0x4000000>;
- read-only;
- };
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Aruba-AP-303";
-};
+++ /dev/null
-/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "GL.iNet GL-B1300";
- compatible = "glinet,gl-b1300";
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- };
-
- ess-psgmii@98000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- usb2@60f8800 {
- status = "okay";
- };
-
- usb3@8af8800 {
- status = "okay";
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- status = "okay";
- switch_lan_bmp = <0x18>;
- switch_wan_bmp = <0x20>;
- };
-
- edma@c080000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- wps {
- label = "wps";
- gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "gl-b1300:green:power";
- gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- mesh {
- label = "gl-b1300:green:mesh";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- };
-
- wlan {
- label = "gl-b1300:green:wlan";
- gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- mx25l25635f@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- MIBIB@40000 {
- label = "MIBIB";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- QSEE@60000 {
- label = "QSEE";
- reg = <0x60000 0x60000>;
- read-only;
- };
-
- CDT@c0000 {
- label = "CDT";
- reg = <0xc0000 0x10000>;
- read-only;
- };
-
- DDRPARAMS@d0000 {
- label = "DDRPARAMS";
- reg = <0xd0000 0x10000>;
- read-only;
- };
-
- APPSBLENV@e0000 {
- label = "APPSBLENV";
- reg = <0xe0000 0x10000>;
- read-only;
- };
-
- APPSBL@f0000 {
- label = "APPSBL";
- reg = <0xf0000 0x80000>;
- read-only;
- };
-
- ART@170000 {
- label = "ART";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- firmware@180000 {
- compatible = "denx,fit";
- label = "firmware";
- reg = <0x180000 0x1e80000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pinmux {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- };
- pinmux_cs {
- function = "gpio";
- pins = "gpio54";
- };
- pinconf {
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <12>;
- bias-disable;
- };
- pinconf_cs {
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "GL-B1300";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "GL-B1300";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree Source for Meraki MR33 (Stinkbug)
- *
- * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
- * Copyright (C) 2017 Christian Lamparter <chunkeey@googlemail.com>
- *
- * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Meraki MR33 Access Point";
- compatible = "meraki,mr33";
-
- aliases {
- led-boot = &status_green;
- led-failsafe = &status_red;
- led-running = &status_green;
- led-upgrade = &power_orange;
- };
-
- /* Do we really need this defined? */
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>;
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- mdio@90000 {
- status = "okay";
- pinctrl-0 = <&mdio_pins>;
- pinctrl-names = "default";
- };
-
- /* It is a 56-bit counter that supplies the count to the ARM arch
- timers and without upstream driver */
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- serial@78b0000 {
- pinctrl-0 = <&serial_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- bluetooth {
- compatible = "ti,cc2650";
- enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
- };
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
-
- ess-switch@c000000 {
- switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
- switch_lan_bmp = <0x0>; /* lan port bitmap */
- switch_wan_bmp = <0x10>; /* wan port bitmap */
- };
-
- edma@c080000 {
- qcom,single-phy;
- qcom,num_gmac = <1>;
- phy-mode = "rgmii-rxid";
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power_orange: power {
- label = "mr33:orange:power";
- gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
- panic-indicator;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac0 {
- qcom,phy_mdio_addr = <1>;
- qcom,poll_required = <1>;
- vlan_tag = <0 0x20>;
-};
-
-&blsp1_i2c3 {
- pinctrl-0 = <&i2c_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- at24@50 {
- compatible = "atmel,24c64";
- pagesize = <32>;
- reg = <0x50>;
- read-only; /* This holds our MAC & Meraki board-data */
- };
-};
-
-&blsp1_i2c4 {
- pinctrl-0 = <&i2c_1_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- led-controller@30 {
- compatible = "ti,lp5562";
- reg = <0x30>;
- clock-mode = /bits/8 <2>;
- enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
-
- /* RGB led */
- status_red: chan0 {
- chan-name = "mr33:red:status";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- status_green: chan1 {
- chan-name = "mr33:green:status";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- chan2 {
- chan-name = "mr33:blue:status";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
-
- chan3 {
- chan-name = "mr33:white:status";
- led-cur = /bits/ 8 <0x20>;
- max-cur = /bits/ 8 <0x60>;
- };
- };
-};
-
-&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- nand@0 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "sbl1";
- reg = <0x00000000 0x00100000>;
- read-only;
- };
- partition@100000 {
- label = "mibib";
- reg = <0x00100000 0x00100000>;
- read-only;
- };
- partition@200000 {
- label = "bootconfig";
- reg = <0x00200000 0x00100000>;
- read-only;
- };
- partition@300000 {
- label = "qsee";
- reg = <0x00300000 0x00100000>;
- read-only;
- };
- partition@400000 {
- label = "qsee_alt";
- reg = <0x00400000 0x00100000>;
- read-only;
- };
- partition@500000 {
- label = "cdt";
- reg = <0x00500000 0x00080000>;
- read-only;
- };
- partition@580000 {
- label = "cdt_alt";
- reg = <0x00580000 0x00080000>;
- read-only;
- };
- partition@600000 {
- label = "ddrparams";
- reg = <0x00600000 0x00080000>;
- read-only;
- };
- partition@700000 {
- label = "u-boot";
- reg = <0x00700000 0x00200000>;
- read-only;
- };
- partition@900000 {
- label = "u-boot-backup";
- reg = <0x00900000 0x00200000>;
- read-only;
- };
- partition@b00000 {
- label = "ART";
- reg = <0x00b00000 0x00080000>;
- read-only;
- };
- partition@c00000 {
- label = "ubi";
- reg = <0x00c00000 0x07000000>;
- /*
- * Do not try to allocate the remaining
- * 4 MiB to this ubi partition. It will
- * confuse the u-boot and it might not
- * find the kernel partition anymore.
- */
- };
- };
- };
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-&qpic_bam {
- status = "okay";
-};
-
-&tlmm {
- /*
- * GPIO43 should be 0/1 whenever the unit is
- * powered through PoE or AC-Adapter.
- * That said, playing with this seems to
- * reset the AP.
- */
-
- mdio_pins: mdio_pinmux {
- mux_1 {
- pins = "gpio6";
- function = "mdio";
- bias-pull-up;
- };
- mux_2 {
- pins = "gpio7";
- function = "mdc";
- bias-pull-up;
- };
- };
-
- serial_0_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- serial_1_pins: serial1_pinmux {
- mux {
- /* We use the i2c-0 pins for serial_1 */
- pins = "gpio8", "gpio9";
- function = "blsp_uart1";
- bias-disable;
- };
- };
-
- i2c_0_pins: i2c_0_pinmux {
- pinmux {
- function = "blsp_i2c0";
- pins = "gpio20", "gpio21";
- };
- pinconf {
- pins = "gpio20", "gpio21";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- i2c_1_pins: i2c_1_pinmux {
- pinmux {
- function = "blsp_i2c1";
- pins = "gpio34", "gpio35";
- };
- pinconf {
- pins = "gpio34", "gpio35";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- /*
- * There are 18 pins. 15 pins are common between LCD and NAND.
- * The QPIC controller arbitrates between LCD and NAND. Of the
- * remaining 4, 2 are for NAND and 2 are for LCD exclusively.
- *
- * The meraki source hints that the bluetooth module claims
- * pin 52 as well. But sadly, there's no data whenever this
- * is a NAND or LCD exclusive pin or not.
- */
-
- pullups {
- pins = "gpio52", "gpio53", "gpio58",
- "gpio59";
- function = "qpic";
- bias-pull-up;
- };
-
- pulldowns {
- pins = "gpio54", "gpio55", "gpio56",
- "gpio57", "gpio60", "gpio61",
- "gpio62", "gpio63", "gpio64",
- "gpio65", "gpio66", "gpio67",
- "gpio68", "gpio69";
- function = "qpic";
- bias-pull-down;
- };
- };
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Meraki-MR33";
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "Meraki-MR33";
-};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017, Sven Eckelmann <sven.eckelmann@openmesh.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "OpenMesh A42";
+ compatible = "openmesh,a42";
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ label = "a42:red:status";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ power: green {
+ label = "a42:green:status";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue {
+ label = "a42:blue:status";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ /* partitions are passed via bootloader */
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <2 0x20>;
+};
+
+&gmac1 {
+ qcom,phy_mdio_addr = <3>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <1 0x10>;
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "OM-A42";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "OM-A42";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ALFA Network AP120C-AC";
+ compatible = "alfa-network,ap120c-ac";
+
+ aliases {
+ led-boot = &status;
+ led-failsafe = &status;
+ led-running = &status;
+ led-upgrade = &status;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status: status {
+ label = "ap120c-ac:blue:status";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ wan {
+ label = "ap120c-ac:amber:wan";
+ gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "ap120c-ac:green:wlan2g";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "ap120c-ac:red:wlan5g";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ phys = <&usb3_hs_phy>;
+ phy-names = "usb2-phy";
+ };
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ qca8075: ess-switch@c000000 {
+ status = "okay";
+
+ switch_lan_bmp = <0x10>;
+ switch_wan_bmp = <0x20>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ tpm@29 {
+ compatible = "atmel,at97sc3204t";
+ reg = <0x29>;
+ };
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+ <&tlmm 4 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ };
+
+ partition@f0000 {
+ label = "APPSBL";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "priv_data1";
+ reg = <0x00180000 0x00010000>;
+ read-only;
+ };
+
+ partition@190000 {
+ label = "priv_data2";
+ reg = <0x00190000 0x00010000>;
+ read-only;
+ };
+ };
+ };
+
+ nand@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "rootfs1";
+ reg = <0x00000000 0x04000000>;
+ };
+
+ partition@4000000 {
+ label = "rootfs2";
+ reg = <0x04000000 0x04000000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial0_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,forced_duplex = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,phy_mdio_addr = <3>;
+ qcom,poll_required = <1>;
+ vlan_tag = <1 0x10>;
+};
+
+&gmac1 {
+ qcom,forced_duplex = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ vlan_tag = <2 0x20>;
+};
+
+&tlmm {
+ i2c0_pins: i2c0_pinmux {
+ mux_i2c {
+ function = "blsp_i2c0";
+ pins = "gpio58", "gpio59";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ mdio_pins: mdio_pinmux {
+ mux_mdio {
+ pins = "gpio53";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_mdc {
+ pins = "gpio52";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial0_pins: serial0_pinmux {
+ mux_uart {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi0_pins: spi0_pinmux {
+ mux_spi {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ mux_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio4";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "EZVIZ CS-W3-WD1200G EUP";
+ compatible = "ezviz,cs-w3-wd1200g-eup";
+
+ aliases {
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_green;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <5000>;
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: status_red {
+ label = "cs-w3-wd1200g-eup:red:status";
+ gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: status_green {
+ label = "cs-w3-wd1200g-eup:green:status";
+ gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_blue: status_blue {
+ label = "cs-w3-wd1200g-eup:blue:status";
+ gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio53";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_2 {
+ pins = "gpio52";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition1@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+
+ partition2@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+
+ partition3@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+
+ partition4@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+
+ partition5@E0000 {
+ label = "APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+
+ partition6@F0000 {
+ label = "APPSBL";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+
+ partition7@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+
+ partition9@580000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x00180000 0x00e80000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "D-Link DAP 2610";
+ compatible = "dlink,dap-2610";
+
+ aliases {
+ led-boot = &led_red;
+ led-failsafe = &led_red;
+ led-running = &led_green;
+ led-upgrade = &led_red;
+ };
+
+ soc {
+ edma@c080000 {
+ qcom,num_gmac = <1>;
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ rng@22000 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ switch_lan_bmp = <0x20>;
+ switch_wan_bmp = <0x00>;
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_red: red {
+ label = "dap-2610:red:power";
+ gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ };
+
+ led_green: green {
+ label = "dap-2610:green:power";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fixed-partitions";
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ partition@d0000 {
+ label = "DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+ partition@f0000 {
+ label = "APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+ partition@170000 {
+ label = "ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+ partition@180000 {
+ compatible = "wrg";
+ label = "firmware";
+ reg = <0x180000 0xdc0000>;
+ };
+ partition@fb0000 {
+ label = "rgbd";
+ reg = <0xfb0000 0x10000>;
+ read-only;
+ };
+ partition@fc0000 {
+ label = "bdcfg";
+ reg = <0xfc0000 0x10000>;
+ read-only;
+ };
+ partition@fd0000 {
+ label = "langpack";
+ reg = <0xfd0000 0x20000>;
+ read-only;
+ };
+ partition@ff0000 {
+ label = "certificate";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ partition@f40000 {
+ label = "captival";
+ reg = <0xf40000 0x70000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <1 0x20>;
+};
+
+&mdio {
+ status = "okay";
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ mux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ mux_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "dlink,dap-2610";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "dlink,dap-2610";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Linksys EA6350v3";
+ compatible = "linksys,ea6350v3";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: status {
+ label = "EA6350v3:green:status";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "linksys-ea6350v3";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "linksys-ea6350v3";
+};
+
+
+&blsp_dma {
+ status = "okay";
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ mux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ mux_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio59";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+ <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ MBIB@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ QSEE@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ CDT@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ APPSBLENV@d0000 {
+ label = "APPSBLENV";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ APPSBL@e0000 {
+ label = "APPSBL"; /* uboot */
+ reg = <0x000e0000 0x00080000>;
+ read-only;
+ };
+ ART@160000 {
+ label = "ART";
+ reg = <0x00160000 0x00010000>;
+ read-only;
+ };
+ u_env@170000 {
+ label = "u_env";
+ reg = <0x00170000 0x00020000>;
+ };
+ s_env@190000 {
+ label = "s_env";
+ reg = <0x00190000 0x00020000>;
+ };
+ devinfo@1b0000 {
+ label = "devinfo";
+ reg = <0x001b0000 0x00010000>;
+ };
+ /* 0x001c0000 - 0x00200000 unused */
+ };
+ };
+
+ flash@1 {
+ status = "okay";
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ kernel@0 {
+ label = "kernel";
+ reg = <0x00000000 0x02800000>;
+ };
+ rootfs@300000 {
+ label = "rootfs";
+ reg = <0x00300000 0x02500000>;
+ };
+ alt_kernel@2800000 {
+ label = "alt_kernel";
+ reg = <0x02800000 0x02800000>;
+ };
+ alt_rootfs@2b00000 {
+ label = "alt_rootfs";
+ reg = <0x02b00000 0x02500000>;
+ };
+ sysdiag@5000000 {
+ label = "sysdiag";
+ reg = <0x05000000 0x00100000>;
+ };
+ syscfg@5100000 {
+ label = "syscfg";
+ reg = <0x05100000 0x02F00000>;
+ };
+ /* 0x00000000 - 0x08000000: 128 MiB */
+ };
+ };
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "EnGenius EAP1300";
+ compatible = "engenius,eap1300";
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: orange {
+ label = "eap1300:orange:power";
+ gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "eap1300:blue:lan";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ mesh {
+ label = "eap1300:blue:mesh";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "eap1300:blue:wlan2g";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "eap1300:yellow:wlan5g";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio54", "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition1@40000 {
+ label = "0:MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition2@60000 {
+ label = "0:QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition3@c0000 {
+ label = "0:CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition4@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition5@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition6@f0000 {
+ label = "0:APPSBL";
+ reg = <0x000f0000 0x00090000>;
+ read-only;
+ };
+ partition7@180000 {
+ label = "0:ART";
+ reg = <0x00180000 0x00010000>;
+ read-only;
+ };
+ partition8@190000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x190000 0x1dc0000>;
+ };
+ partition9@1f50000 {
+ label = "u-boot-env";
+ reg = <0x01f50000 0x00010000>;
+ };
+ partition10@1f60000 {
+ label = "userconfig";
+ reg = <0x01f60000 0x000a0000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ vlan_tag = <2 0x20>;
+};
+
+&gmac1 {
+ vlan_tag = <1 0x10>;
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-EAP1300";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "EnGenius EMD1";
+ compatible = "engenius,emd1";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ switch_lan_bmp = <0x20>;
+ switch_wan_bmp = <0x00>;
+ };
+
+ edma@c080000 {
+ status = "okay";
+ qcom,num_gmac = <1>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "emd1:white:power";
+ gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "emd1:red:wlan2g";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "emd1:blue:wlan5g";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ mesh {
+ label = "emd1:orange:mesh";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio54", "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "0:SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition1@40000 {
+ label = "0:MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition2@60000 {
+ label = "0:QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition3@c0000 {
+ label = "0:CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition4@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition5@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition6@f0000 {
+ label = "0:APPSBL";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+ partition7@170000 {
+ label = "0:ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ partition8@180000 {
+ label = "userconfig";
+ reg = <0x00180000 0x00080000>;
+ read-only;
+ };
+ partition9@200000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x200000 0x01e00000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <1 0x20>;
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-EMD1";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-EMD1";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "EnGenius EMR3500";
+ compatible = "engenius,emr3500";
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: white {
+ label = "emr3500:white:power";
+ gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue {
+ label = "emr3500:blue";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ red {
+ label = "emr3500:red";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ orange {
+ label = "emr3500:orange";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio54", "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition@f0000 {
+ label = "0:APPSBL";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+ partition@170000 {
+ label = "0:ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "userconfig";
+ reg = <0x00180000 0x00080000>;
+ read-only;
+ };
+ partition@200000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x200000 0x1e00000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ vlan_tag = <1 0x10>;
+};
+
+&gmac1 {
+ vlan_tag = <2 0x20>;
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "EnGenius ENS620EXT";
+ compatible = "engenius,ens620ext";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ /*
+ * Disable the broken restart as a workaround for the buggy
+ * 3.0.0/3.0.1 U-boots that ship with the device.
+ * Note: The watchdog is now used to restart this device.
+ */
+ restart@4ab000 {
+ status = "disabled";
+ };
+ };
+
+ buttons {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "ens620ext:amber:power";
+ gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "ens620ext:green:lan1";
+ gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "ens620ext:green:lan2";
+ gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2G {
+ label = "ens620ext:green:wlan2G";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5G {
+ label = "ens620ext:green:wlan5G";
+ gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ mux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ mux_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "APPSBLENV"; /* uboot env*/
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition@f0000 {
+ label = "APPSBL"; /* uboot */
+ reg = <0x000f0000 0x00090000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "ART";
+ reg = <0x00180000 0x00010000>;
+ read-only;
+ };
+ partition@190000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x00190000 0x14d0000>;
+ };
+ partition@1660000 {
+ label = "failsafe";
+ reg = <0x01660000 0x008F0000>;
+ read-only;
+ };
+ partition@1f50000 {
+ label = "u-boot-env";
+ reg = <0x01f50000 0x00010000>;
+ read-only;
+ };
+ partition@1f60000 {
+ label = "userconfig";
+ reg = <0x01f60000 0x000a0000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4018-ex61x0v2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear EX6100v2";
+ compatible = "netgear,ex6100v2";
+};
+
+&wifi0 {
+ qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
+};
+
+&wifi1 {
+ qcom,ath10k-calibration-variant = "Netgear-EX6100v2";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4018-ex61x0v2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Netgear EX6150v2";
+ compatible = "netgear,ex6150v2";
+};
+
+&wifi0 {
+ qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
+};
+
+&wifi1 {
+ qcom,ath10k-calibration-variant = "Netgear-EX6150v2";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Netgear EX61X0v2";
+ compatible = "netgear,ex61x0v2";
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ qcom,num_gmac = <1>;
+ };
+ };
+
+ aliases {
+ led-boot = &power_amber;
+ led-failsafe = &power_amber;
+ led-running = &power_green;
+ led-upgrade = &power_amber;
+ label-mac-device = &gmac0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_amber: power_amber {
+ label = "ex61x0v2:amber:power";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ power_green: power_green {
+ label = "ex61x0v2:green:power";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ right {
+ label = "ex61x0v2:blue:right";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ left {
+ label = "ex61x0v2:blue:left";
+ gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ client_green {
+ label = "ex61x0v2:green:client";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ client_red {
+ label = "ex61x0v2:red:client";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ router_green {
+ label = "ex61x0v2:green:router";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ router_red {
+ label = "ex61x0v2:red:router";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "ex61x0v2:green:wps";
+ gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ mx25l12805d@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition1@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+
+ partition2@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+
+ partition3@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+
+ partition4@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+
+ partition5@E0000 {
+ label = "APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+
+ partition6@F0000 {
+ label = "APPSBL";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+
+ partition7@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+
+ partition8@180000 {
+ label = "config";
+ reg = <0x00180000 0x00010000>;
+ read-only;
+ };
+
+ partition9@190000 {
+ label = "pot";
+ reg = <0x00190000 0x00010000>;
+ read-only;
+ };
+
+ partition10@1a0000 {
+ label = "dnidata";
+ reg = <0x001a0000 0x00010000>;
+ read-only;
+ };
+
+ partition11@1b0000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x001b0000 0x00e10000>;
+ };
+
+ partition12@fc0000 {
+ label = "language";
+ reg = <0x00fc0000 0x00040000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+};
+
+&wifi1 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "AVM FRITZ!Box 4040";
+ compatible = "avm,fritzbox-4040";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &flash;
+ led-running = &power;
+ led-upgrade = &flash;
+ label-mac-device = &gmac0;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ qca8075: ess-switch@c000000 {
+ status = "okay";
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ enable-usb-power {
+ gpio-hog;
+ line-name = "enable USB3 power";
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wlan {
+ label = "wlan";
+ gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ switch-leds {
+ compatible = "gpio-leds";
+
+ wlan {
+ label = "fritz4040:green:wlan";
+ gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ panic: info_red {
+ label = "fritz4040:red:info";
+ gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ wan {
+ label = "fritz4040:green:wan";
+ gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "fritz4040:green:power";
+ gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan {
+ label = "fritz4040:green:lan";
+ gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ flash: info_amber {
+ label = "fritz4040:amber:info";
+ gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ mux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ mux_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ status = "okay";
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition1@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition2@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition3@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition4@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition5@e0000 {
+ label = "APPSBLENV"; /* uboot env - empty */
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition6@f0000 {
+ label = "urlader"; /* APPSBL */
+ reg = <0x000f0000 0x0002dc000>;
+ read-only;
+ };
+ partition7@11dc00 {
+ /* make a backup of this partition! */
+ label = "urlader_config";
+ reg = <0x0011dc00 0x00002400>;
+ read-only;
+ };
+ partition8@120000 {
+ label = "tffs1";
+ reg = <0x00120000 0x00080000>;
+ read-only;
+ };
+ partition9@1a0000 {
+ label = "tffs2";
+ reg = <0x001a0000 0x00080000>;
+ read-only;
+ };
+ partition10@220000 {
+ label = "uboot";
+ reg = <0x00220000 0x00080000>;
+ read-only;
+ };
+ partition11@2A0000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x002a0000 0x01c60000>;
+ };
+ partition12@1f00000 {
+ label = "jffs2";
+ reg = <0x01f00000 0x00100000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
+
+#include "qcom-ipq4018-jalapeno.dtsi"
+
+/ {
+ model = "8devices Jalapeno";
+ compatible = "8dev,jalapeno";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ status = "okay";
+
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+
+ switch_lan_bmp = <0x10>; /* lan port bitmap */
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio_pinmux {
+ pinmux_1 {
+ pins = "gpio53";
+ function = "mdio";
+ };
+
+ pinmux_2 {
+ pins = "gpio52";
+ function = "mdc";
+ };
+
+ pinconf {
+ pins = "gpio52", "gpio53";
+ bias-pull-up;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio59";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ status = "okay";
+
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "APPSBLENV"; /* uboot env*/
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "APPSBL"; /* uboot */
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ };
+ };
+
+ spi-nand@1 {
+ status = "okay";
+
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x00000000 0x08000000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,poll_required = <1>;
+ qcom,poll_required_dynamic = <1>;
+ qcom,phy_mdio_addr = <3>;
+ vlan_tag = <1 0x10>;
+};
+
+&gmac1 {
+ qcom,poll_required = <1>;
+ qcom,poll_required_dynamic = <1>;
+ qcom,phy_mdio_addr = <4>;
+ vlan_tag = <2 0x20>;
+};
+
+&wifi0 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o.
+ * Author: Robert Marko <robert@meshpoint.me>
+ */
+
+#include "qcom-ipq4018-jalapeno.dtsi"
+
+/ {
+ model = "Crisis Innovation Lab MeshPoint.One";
+ compatible = "cilab,meshpoint-one";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ soc {
+ i2c-gpio {
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "i2c-gpio";
+ gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
+ &tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */
+ >;
+
+ bme280@76 {
+ status = "okay";
+
+ compatible = "bosch,bme280";
+ reg = <0x76>;
+ };
+
+ pcf2129@51 {
+ status = "okay";
+
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+
+ ina230@40 {
+ status = "okay";
+
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ ina230@44 {
+ status = "okay";
+
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART >;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "meshpoint-one:blue:status";
+ gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ZyXEL NBG6617";
+ compatible = "zyxel,nbg6617";
+
+ chosen {
+ /*
+ * the vendor u-boot adds root and mtdparts cmdline parameters
+ * which we don't want... but we have to overwrite them or else
+ * the kernel will take them at face value.
+ */
+ bootargs-append = " mtdparts= root=31:13";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+
+ dwc3@6000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ usb3_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wlan {
+ label = "wlan";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RFKILL>;
+ linux,input-type = <EV_SW>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ power: power {
+ label = "nbg6617:green:power";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb {
+ label = "nbg6617:green:usb";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ wlan2G {
+ label = "nbg6617:green:wlan2G";
+ gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5G {
+ label = "nbg6617:green:wlan5G";
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "nbg6617:green:wps";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+ spi_0_pins: spi_0_pinmux {
+ mux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ mux_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+ };
+ led_pins: led_pinmux {
+ mux {
+ pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
+ drive-strength = <0x8>;
+ bias-disable;
+ output-low;
+ };
+ };
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ mx25l25635f@0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ status = "okay";
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition1@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition2@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition3@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition4@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition5@e0000 {
+ label = "APPSBL"; /* u-boot */
+ reg = <0x000e0000 0x00080000>;
+ /* U-Boot Standalone App "zloader" is located at 0x64000 */
+ read-only;
+ };
+ partition6@160000 {
+ label = "APPSBLENV"; /* u-boot env */
+ reg = <0x00160000 0x00010000>;
+ };
+ partition7@170000 {
+ /* make a backup of this partition! */
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ partition8@180000 {
+ label = "kernel";
+ reg = <0x00180000 0x00400000>;
+ };
+ partition9@580000 {
+ label = "dualflag";
+ reg = <0x00580000 0x00010000>;
+ read-only;
+ };
+ partition10@590000 {
+ label = "header";
+ reg = <0x00590000 0x00010000>;
+ };
+ partition11@5a0000 {
+ label = "romd";
+ reg = <0x005a0000 0x00100000>;
+ read-only;
+ };
+ partition12@6a0000 {
+ label = "not_root_data";
+ /*
+ * for some strange reason, someone at ZyXEL
+ * had the "great" idea to put the rootfs_data
+ * in front of rootfs... Don't do that!
+ * As a result this one, full MebiByte remains
+ * unused.
+ */
+ reg = <0x006a0000 0x00100000>;
+ };
+ partition13@7a0000 {
+ label = "rootfs";
+ reg = <0x007a0000 0x01860000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ASUS RT-AC58U";
+ compatible = "asus,rt-ac58u";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>;
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs-append = " ubi.mtd=UBI_DEV";
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ usb3_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: status {
+ label = "rt-ac58u:blue:status";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "rt-ac58u:blue:wan";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2G {
+ label = "rt-ac58u:blue:wlan2G";
+ gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5G {
+ label = "rt-ac58u:blue:wlan5G";
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ usb {
+ label = "rt-ac58u:blue:usb";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&usb3_port1>, <&usb3_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ lan {
+ label = "rt-ac58u:blue:lan";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ mux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ mux_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio59";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp1_spi1 { /* BLSP1 QUP1 */
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+ <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ /*
+ * U-boot looks for "n25q128a11" node,
+ * if we don't have it, it will spit out the following warning:
+ * "ipq: fdt fixup unable to find compatible node".
+ */
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
+ spi-max-frequency = <30000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "APPSBLENV"; /* uboot env*/
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition@f0000 {
+ label = "APPSBL"; /* uboot */
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+ partition@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ /* 0x00180000 - 0x00200000 unused */
+ };
+ };
+
+ spi-nand@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <30000000>;
+
+ /*
+ * U-boot looks for "spinand,mt29f" node,
+ * if we don't have it, it will spit out the following warning:
+ * "ipq: fdt fixup unable to find compatible node".
+ */
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ /*
+ * TODO: change to label = "ubi" once we drop 4.14.
+ * also drop the bootargs-append and all the
+ * userspace CI_UBIPART="UBI_DEV" remains.
+ */
+ label = "UBI_DEV";
+ reg = <0x00000000 0x08000000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "RT-AC58U";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "RT-AC58U";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2018, David Bauer <mail@david-bauer.net>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ZyXEL WRE6606";
+ compatible = "zyxel,wre6606";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ chosen {
+ bootargs-append = " mtdparts=";
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ qcom,num_gmac = <1>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "wre6606:green:wps";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_green {
+ label = "wre6606:green:wlan5g";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ power: power {
+ label = "wre6606:green:power";
+ gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g_red {
+ label = "wre6606:red:wlan5g";
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_red {
+ label = "wre6606:red:wlan2g";
+ gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g_green {
+ label = "wre6606:green:wlan2g";
+ gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ mx25l12805d@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+
+ partition1@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+
+ partition2@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+
+ partition3@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+
+ partition4@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+
+ partition5@E0000 {
+ label = "APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+
+ partition6@F0000 {
+ label = "APPSBL";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+
+ partition7@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+
+ partition8@180000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x00180000 0x00ce0000>;
+ };
+
+ partition9@e60000 {
+ label = "manufacture";
+ reg = <0x00e60000 0x00050000>;
+ read-only;
+ };
+
+ partition10@eb0000 {
+ label = "storage";
+ reg = <0x00eb0000 0x00150000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ZyXEL-WRE6606";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "OpenMesh A62";
+ compatible = "openmesh,a62";
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ switch_lan_bmp = <0x10>;
+ switch_wan_bmp = <0x20>;
+
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART >;
+ };
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ label = "a62:red:status";
+ gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ power: green {
+ label = "a62:green:status";
+ gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+ };
+
+ blue {
+ label = "a62:blue:status";
+ gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ /* hw_margin_ms is actually 300s but driver limits it to 60s */
+ hw_margin_ms = <60000>;
+ always-running;
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ enable-usb-power {
+ gpio-hog;
+ gpios = <58 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "enable USB2 power";
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ /* partitions are passed via bootloader */
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <3>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <1 0x10>;
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "OM-A62";
+ ieee80211-freq-limit = <5170000 5350000>;
+ };
+ };
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "OM-A62";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "OM-A62";
+ ieee80211-freq-limit = <5470000 5875000>;
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019-ap.dk04.1.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
+ compatible = "qcom,ipq4019";
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ pinctrl@1000000 {
+ serial_0_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ serial_1_pins: serial1_pinmux {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12";
+ };
+ pinconf {
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ i2c_0_pins: i2c_0_pinmux {
+ pinmux {
+ function = "blsp_i2c0";
+ pins = "gpio10", "gpio11";
+ };
+ pinconf {
+ pins = "gpio10", "gpio11";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58",
+ "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+ };
+
+ blsp_dma: dma@7884000 {
+ status = "okay";
+ };
+
+ spi0: spi@78b5000 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ mx25l25635e@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ compatible = "mx25l25635e";
+ spi-max-frequency = <24000000>;
+ };
+ };
+
+ i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ };
+
+ serial@78af000 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@78b0000 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ usb3_ss_phy: ssphy@9a000 {
+ status = "okay";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ status = "okay";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "okay";
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ status = "okay";
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
+
+ cryptobam: dma@8e04000 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ qpic_bam: dma@7984000 {
+ status = "okay";
+ };
+
+ nand: qpic-nand@79b0000 {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "MobiPromo CM520-79F";
+ compatible = "mobipromo,cm520-79f";
+
+ aliases {
+ led-boot = &led_sys;
+ led-failsafe = &led_sys;
+ led-running = &led_sys;
+ led-upgrade = &led_sys;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <1000>;
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+
+ dwc3@6000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ usb3_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ ranges;
+
+ sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "cm520-79f:blue:usb";
+ gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbport";
+ trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>;
+ };
+
+ led_sys: can {
+ label = "cm520-79f:blue:can";
+ gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "cm520-79f:blue:wan";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "cm520-79f:blue:lan1";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "cm520-79f:blue:lan2";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "cm520-79f:blue:wlan2g";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "cm520-79f:blue:wlan5g";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ status = "okay";
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ mtd-mac-address = <&art 0x1006>;
+};
+
+&gmac1 {
+ mtd-mac-address = <&art 0x5006>;
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "MIBIB";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "BOOTCONFIG";
+ reg = <0x200000 0x100000>;
+ };
+
+ partition@300000 {
+ label = "QSEE";
+ reg = <0x300000 0x100000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "QSEE_1";
+ reg = <0x400000 0x100000>;
+ read-only;
+ };
+
+ partition@500000 {
+ label = "CDT";
+ reg = <0x500000 0x80000>;
+ read-only;
+ };
+
+ partition@580000 {
+ label = "CDT_1";
+ reg = <0x580000 0x80000>;
+ read-only;
+ };
+
+ partition@600000 {
+ label = "BOOTCONFIG1";
+ reg = <0x600000 0x80000>;
+ };
+
+ partition@680000 {
+ label = "APPSBLENV";
+ reg = <0x680000 0x80000>;
+ };
+
+ partition@700000 {
+ label = "APPSBL";
+ reg = <0x700000 0x200000>;
+ read-only;
+ };
+
+ partition@900000 {
+ label = "APPSBL_1";
+ reg = <0x900000 0x200000>;
+ read-only;
+ };
+
+ art: partition@b00000 {
+ label = "ART";
+ reg = <0xb00000 0x80000>;
+ read-only;
+ };
+
+ partition@b80000 {
+ label = "ubi";
+ reg = <0xb80000 0x7480000>;
+ };
+ };
+ };
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58",
+ "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "CM520-79F";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "CM520-79F";
+};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ *
+ * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
+ *
+ */
+
+#include "qcom-ipq4019-e2600ac.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Qxwlan E2600AC c1";
+ compatible = "qxwlan,e2600ac-c1";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+ partition@f0000 {
+ label = "0:APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+ partition@170000 {
+ label = "0:ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+ partition@180000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x180000 0x1e80000>;
+ };
+ };
+ };
+};
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ *
+ * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
+ *
+ */
+
+#include "qcom-ipq4019-e2600ac.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Qxwlan E2600AC c2";
+ compatible = "qxwlan,e2600ac-c2";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+ partition@f0000 {
+ label = "0:APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+ partition@170000 {
+ label = "0:ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x00000000 0x04000000>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ nand_pins: nand-pins {
+
+ pullups {
+ pins = "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+};
+
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ *
+ * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+
+ model = "Qxwlan E2600AC";
+ compatible = "qcom,ipq4019";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256MB */
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+
+ dwc3@6000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ serial@78af000 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@78b0000 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ i2c@78b7000 { /* BLSP1 QUP2 */
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ usb3_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "e2600ac:green:wlan0";
+ gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ label = "e2600ac:green:wlan1";
+ gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ label = "e2600ac:green:usb";
+ gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ led4 {
+ label = "e2600ac:green:ctrl1";
+ gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
+ };
+
+ led5 {
+ label = "e2600ac:green:ctrl2";
+ gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+ };
+
+ led6 {
+ label = "e2600ac:green:ctrl3";
+ gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ i2c_0_pins: i2c-0-pinmux {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "blsp_i2c0";
+ bias-disable;
+ };
+ };
+
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial_0_pins: serial0-pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ serial_1_pins: serial1_pinmux {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Qxwlan-E2600AC";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/*
+ * Device Tree Source for Linksys EA8300 (Dallas)
+ *
+ * Copyright (C) 2019 Jeff Kletsky
+ *
+ */
+
+/dts-v1/;
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Linksys EA8300 (Dallas)";
+ compatible = "linksys,ea8300", "qcom,ipq4019";
+
+
+ aliases {
+ led-boot = &led_wps_amber;
+ led-failsafe = &led_wps;
+ led-running = &led_linksys;
+ led-upgrade = &led_world;
+ serial0 = &blsp1_uart1;
+ };
+
+
+ leds {
+ compatible = "gpio-leds";
+
+ // Retain node names from running OEM on EA8300
+
+ // Front panel LEDs, top to bottom
+
+ led_plug: diag {
+ label = "ea8300:amber:plug";
+ gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_world: internet {
+ label = "ea8300:amber:world";
+ gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_wps: wps {
+ label = "ea8300:white:wps";
+ gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_wps_amber: wps_amber {
+ label = "ea8300:amber:wps";
+ gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ led_linksys: pwr {
+ label = "ea8300:white:linksys";
+ gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+ };
+
+ // On back panel, above USB socket
+
+ led_usb: usb {
+ label = "ea8300:green:usb";
+ gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&usb3_port1>, <&usb3_port2>,
+ <&usb2_port1>;
+ linux,default-trigger = "usbport";
+ };
+ };
+
+
+ keys {
+ compatible = "gpio-keys";
+
+ button@0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+
+ //
+ // OEM U-Boot provides either
+ // init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \
+ // root=ubi0:ubifs rootwait rw
+ // or the same with ubi.mtd=13,2048
+ //
+
+ chosen {
+ bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro";
+ };
+
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+
+ dwc3@6000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb2_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb3_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ usb3_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+};
+
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ status = "okay";
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "sbl1";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "mibib";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "qsee";
+ reg = <0x200000 0x100000>;
+ read-only;
+ };
+
+ partition@300000 {
+ label = "cdt";
+ reg = <0x300000 0x80000>;
+ read-only;
+ };
+
+ partition@380000 {
+ label = "appsblenv";
+ reg = <0x380000 0x80000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "ART";
+ reg = <0x400000 0x80000>;
+ read-only;
+ };
+
+ partition@480000 {
+ label = "appsbl";
+ reg = <0x480000 0x200000>;
+ read-only;
+ };
+
+ partition@680000 {
+ label = "u_env";
+ reg = <0x680000 0x80000>;
+ // writable -- U-Boot environment
+ };
+
+ partition@700000 {
+ label = "s_env";
+ reg = <0x700000 0x40000>;
+ // writable -- Boot counter records
+ };
+
+ partition@740000 {
+ label = "devinfo";
+ reg = <0x740000 0x40000>;
+ read-only;
+ };
+
+ partition@780000 {
+ label = "kernel";
+ reg = <0x780000 0x5800000>;
+ };
+
+ partition@a80000 {
+ label = "rootfs";
+ reg = <0xa80000 0x5500000>;
+ };
+
+ partition@5f80000 {
+ label = "alt_kernel";
+ reg = <0x5f80000 0x5800000>;
+ };
+
+ partition@6280000 {
+ label = "alt_rootfs";
+ reg = <0x6280000 0x5500000>;
+ };
+
+ partition@b780000 {
+ label = "sysdiag";
+ reg = <0xb780000 0x100000>;
+ read-only;
+ };
+
+ partition@b880000 {
+ label = "syscfg";
+ reg = <0xb880000 0x4680000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ serial_0_pins: serial0-pinmux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ // gpio61 controls led_usb
+
+ pulldowns {
+ pins = "gpio55", "gpio56", "gpio57",
+ "gpio60", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66",
+ "gpio67", "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
+};
+
+&wifi1 {
+ status = "okay";
+ ieee80211-freq-limit = <5170000 5330000>;
+ qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
+};
+
+&wifi2 {
+ status = "okay";
+ ieee80211-freq-limit = <5490000 5835000>;
+ qcom,ath10k-calibration-variant = "linksys-ea8300-fcc";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "EnGenius EAP2200";
+ compatible = "engenius,eap2200";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "eap2200:amber:power";
+ gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1 {
+ label = "eap2200:blue:lan1";
+ gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2 {
+ label = "eap2200:blue:lan2";
+ gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan2g {
+ label = "eap2200:blue:wlan2g";
+ gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "eap2200:yellow:wlan5g";
+ gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g2 {
+ label = "eap2200:yellow:wlan5g2";
+ gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy2tpt";
+ };
+
+ mode {
+ label = "eap2200:blue:mode";
+ gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ switch_lan_bmp = <0x10>;
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "0:SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition1@40000 {
+ label = "0:MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition2@60000 {
+ label = "0:QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition3@c0000 {
+ label = "0:CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition4@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition5@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition6@f0000 {
+ label = "0:APPSBL";
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+ partition7@170000 {
+ label = "0:ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ vlan_tag = <1 0x10>;
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "rootfs1";
+ reg = <0x00000000 0x04000000>;
+ };
+ partition@40000000 {
+ label = "ubi";
+ reg = <0x04000000 0x04000000>;
+ };
+
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x00010000 0 0 0 0>;
+ ieee80211-freq-limit = <5470000 5875000>;
+ qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
+ };
+ };
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+
+ serial_0_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
+};
+
+&wifi1 {
+ status = "okay";
+ ieee80211-freq-limit = <5170000 5350000>;
+ qcom,ath10k-calibration-variant = "EnGenius-EAP2200";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "AVM FRITZ!Box 7530";
+ compatible = "avm,fritzbox-7530";
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &info_red;
+ led-running = &power_green;
+ led-upgrade = &info_green;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ qcom,num_gmac = <1>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wlan {
+ label = "wlan";
+ gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ dect {
+ label = "dect";
+ gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PHONE>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ info_red: info_red {
+ label = "fritzbox-7530:red:info";
+ gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+ };
+
+ info_green: info {
+ label = "fritzbox-7530:green:info";
+ gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "fritzbox-7530:green:wlan";
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+ };
+
+ fon {
+ label = "fritzbox-7530:green:fon";
+ gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ };
+
+ power_green: power {
+ label = "fritzbox-7530:green:power";
+ gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "fritzbox-7530:green:wps";
+ gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&tlmm {
+ serial_0_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+
+ usb-power {
+ line-name = "enable USB3 power";
+ gpios = <49 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x000000 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "MIBIB";
+ reg = <0x080000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "QSEE";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "CDT";
+ reg = <0x180000 0x40000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "QSEE_B";
+ reg = <0x1c0000 0x80000>;
+ read-only;
+ };
+
+ partition@240000 {
+ label = "urlader0";
+ reg = <0x240000 0x40000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "urlader1";
+ reg = <0x280000 0x40000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "nand-tffs";
+ reg = <0x2c0000 0x840000>;
+ read-only;
+ };
+
+ partition@b00000 {
+ /* 'kernel1' in AVM firmware */
+ label = "uboot0";
+ reg = <0xb00000 0x400000>;
+ };
+
+ partition@f00000 {
+ /* 'kernel2' in AVM firmware */
+ label = "uboot1";
+ reg = <0xf00000 0x400000>;
+ };
+
+ partition@1300000 {
+ label = "ubi";
+ reg = <0x1300000 0x6d00000>;
+ };
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
+};
+
+&pcie0 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ dsl@1,0 {
+ compatible = "intel,vrx518";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "AVM FRITZ!Repeater 1200";
+ compatible = "avm,fritzrepeater-1200";
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_red;
+ led-running = &power_green;
+ led-upgrade = &power_red;
+ label-mac-device = &wifi0;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
+ switch_lan_bmp = <0x0>; /* lan port bitmap */
+ switch_wan_bmp = <0x10>; /* wan port bitmap */
+ };
+
+ edma@c080000 {
+ status = "okay";
+ phy-mode = "rgmii-rxid";
+ qcom,num_gmac = <1>;
+ qcom,single-phy;
+ };
+ };
+
+ key {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "WPS button";
+ gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_red: power_red {
+ label = "fritzwlan-1200:red:power";
+ gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ };
+
+ power_green: power_green {
+ label = "fritzwlan-1200:green:power";
+ gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+ };
+
+ power_yellow {
+ label = "fritzwlan-1200:yellow:power";
+ gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&tlmm {
+ serial_0_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ phy-reset {
+ line-name = "PHY-reset";
+ gpios = <19 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+
+ phy-reset-2 {
+ line-name = "PHY-reset-2";
+ gpios = <47 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "MIBIB";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "QSEE";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "CDT";
+ reg = <0x180000 0x40000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "QSEE_B";
+ reg = <0x1c0000 0x80000>;
+ read-only;
+ };
+
+ partition@240000 {
+ label = "urlader0";
+ reg = <0x240000 0x40000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "urlader1";
+ reg = <0x280000 0x40000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "nand-tffs";
+ reg = <0x2c0000 0x840000>;
+ read-only;
+ };
+
+ partition@b00000 {
+ /* 'kernel1' in AVM firmware */
+ label = "uboot0";
+ reg = <0xb00000 0x400000>;
+ };
+
+ partition@f00000 {
+ /* 'kernel2' in AVM firmware */
+ label = "uboot1";
+ reg = <0xf00000 0x400000>;
+ };
+
+ partition@1300000 {
+ label = "ubi";
+ reg = <0x1300000 0x6d00000>;
+ };
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <0>;
+ qcom,poll_required = <1>;
+ vlan_tag = <0 0x20>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "AVM FRITZ!Repeater 3000";
+ compatible = "avm,fritzrepeater-3000";
+
+ aliases {
+ led-boot = &power_led;
+ led-failsafe = &power_led;
+ led-running = &power_led;
+ led-upgrade = &power_led;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+
+ switch_lan_bmp = <0x10>;
+ switch_wan_bmp = <0x20>;
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ key {
+ compatible = "gpio-keys";
+
+ connect {
+ label = "Connect";
+ gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ connect_red {
+ label = "fritzwlan-3000:red:connect";
+ gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+ };
+
+ connect_green {
+ label = "fritzwlan-3000:green:connect";
+ gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+ };
+
+ connect_blue {
+ label = "fritzwlan-3000:blue:connect";
+ gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+ };
+
+ power_led: power {
+ label = "fritzwlan-3000:green:power";
+ gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&tlmm {
+ serial_0_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x000000 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "MIBIB";
+ reg = <0x080000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "QSEE";
+ reg = <0x100000 0x80000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "CDT";
+ reg = <0x180000 0x40000>;
+ read-only;
+ };
+
+ partition@1c0000 {
+ label = "QSEE_B";
+ reg = <0x1c0000 0x80000>;
+ read-only;
+ };
+
+ partition@240000 {
+ label = "urlader0";
+ reg = <0x240000 0x40000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "urlader1";
+ reg = <0x280000 0x40000>;
+ read-only;
+ };
+
+ partition@2c0000 {
+ label = "nand-tffs";
+ reg = <0x2c0000 0x840000>;
+ read-only;
+ };
+
+ partition@b00000 {
+ /* 'kernel1' in AVM firmware */
+ label = "uboot0";
+ reg = <0xb00000 0x400000>;
+ };
+
+ partition@f00000 {
+ /* 'kernel2' in AVM firmware */
+ label = "uboot1";
+ reg = <0xf00000 0x400000>;
+ };
+
+ partition@1300000 {
+ label = "ubi";
+ reg = <0x1300000 0x6d00000>;
+ };
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
+ qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
+};
+
+&wifi1 {
+ status = "okay";
+ ieee80211-freq-limit = <5170000 5350000>;
+ /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */
+ qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000";
+};
+
+&pcie0 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi@1,0 {
+ /* QCA9984 */
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ ieee80211-freq-limit = <5470000 5875000>;
+ /* Uses the reference BDF */
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2019, Robert Marko <robimarko@gmail.com> */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "8devices Habanero DVK";
+ compatible = "8dev,habanero-dvk";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_upgrade;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ status = "okay";
+
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: status {
+ label = "habanero-dvk:green:status";
+ gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ led_upgrade: upgrade {
+ label = "habanero-dvk:green:upgrade";
+ gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "habanero-dvk:green:wlan2g";
+ gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ label = "habanero-dvk:green:wlan5g";
+ gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&vqmmc {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+
+ pinctrl-0 = <&sd_pins>;
+ pinctrl-names = "default";
+ cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+ vqmmc-supply = <&vqmmc>;
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56", "gpio57",
+ "gpio60", "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67", "gpio68",
+ "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+
+ sd_pins: sd_pins {
+ pinmux {
+ function = "sdio";
+ pins = "gpio23", "gpio24", "gpio25", "gpio26",
+ "gpio28", "gpio29", "gpio30", "gpio31";
+ drive-strength = <10>;
+ };
+
+ pinmux_sd_clk {
+ function = "sdio";
+ pins = "gpio27";
+ drive-strength = <16>;
+ };
+
+ pinmux_sd7 {
+ function = "sdio";
+ pins = "gpio32";
+ drive-strength = <10>;
+ bias-disable;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <24000000>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition@d0000 {
+ label = "DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "APPSBLENV"; /* uboot env */
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition@f0000 {
+ label = "APPSBL"; /* uboot */
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+ partition@170000 {
+ label = "ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ partition@180000 {
+ label = "cfg";
+ reg = <0x00180000 0x00040000>;
+ };
+ partition@1c0000 {
+ label = "firmware";
+ compatible = "denx,fit";
+ reg = <0x001c0000 0x01e40000>;
+ };
+ };
+ };
+};
+
+/* Some DVK boards ship without NAND */
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ /* Free slot for use */
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+};
+
+&wifi0 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "8devices-Habanero";
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "8devices-Habanero";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/dts-v1/;
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "ASUS Lyra MAP-AC2200";
+ compatible = "asus,map-ac2200";
+
+ aliases {
+ led-boot = &led_blue0;
+ led-failsafe = &led_red0;
+ led-running = &led_blue0;
+ led-upgrade = &led_red0;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SBL1";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "MIBIB";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "QSEE";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "CDT";
+ reg = <0x200000 0x80000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "APPSBL";
+ reg = <0x280000 0x140000>;
+ read-only;
+ };
+
+ partition@3c0000 {
+ label = "APPSBLENV";
+ reg = <0x3c0000 0x40000>;
+ read-only;
+ };
+
+ partition@400000 {
+ label = "ubi";
+ reg = <0x400000 0x7c00000>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ i2c_0_pins: i2c_0_pinmux {
+ pinmux {
+ function = "blsp_i2c0";
+ pins = "gpio20", "gpio21";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58",
+ "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+ ieee80211-freq-limit = <5470000 5875000>;
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200";
+ ieee80211-freq-limit = <5170000 5350000>;
+ };
+ };
+};
+
+&usb2_hs_phy {
+ /* Bluetooth module attached via USB */
+ status = "okay";
+};
+
+&blsp1_i2c3 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ led-controller@32 {
+ /* 9-channel RGB LED controller */
+ compatible = "national,lp5523";
+ reg = <0x32>;
+ clock-mode = [01];
+
+ led_blue0: blue0 {
+ chan-name = "blue0";
+ label = "map-ac2200:blue:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ blue1 {
+ chan-name = "blue1";
+ label = "map-ac2200:blue:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ blue2 {
+ chan-name = "blue2";
+ label = "map-ac2200:blue:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ led_green0: green0 {
+ chan-name = "green0";
+ label = "map-ac2200:green:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ green1 {
+ chan-name = "green1";
+ label = "map-ac2200:green:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ green2 {
+ chan-name = "green2";
+ label = "map-ac2200:green:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ led_red0: red0 {
+ chan-name = "red0";
+ label = "map-ac2200:red:chan0";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ red1 {
+ chan-name = "red1";
+ label = "map-ac2200:red:chan1";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+
+ red2 {
+ chan-name = "red2";
+ label = "map-ac2200:red:chan2";
+ led-cur = [fa];
+ max-cur = [ff];
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: ISC
+// Copyright (c) 2015, The Linux Foundation. All rights reserved.
+// Copyright (c) 2019, Cezary Jackiewicz <cezary@eko.one.pl>.
+// Copyright (c) 2020, Pawel Dembicki <paweldembicki@gmail.com>.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/soc/qcom,tcsr.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Cell C RTL30VW";
+ compatible = "cellc,rtl30vw";
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_red;
+ };
+
+ chosen {
+ bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro";
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-chipselects = <1>;
+
+ mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <2>;
+ spi-max-frequency = <1000000>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_blue: power_blue {
+ gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:power";
+ default-state = "on";
+ };
+
+ led_power_red: power_red {
+ gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:red:power";
+ };
+
+ tp28 {
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ label = "rtl30vw:ext:tp28";
+ default-state = "keep";
+ };
+
+ tp27 {
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ label = "rtl30vw:ext:tp27";
+ default-state = "keep";
+ };
+
+ wlan2g {
+ gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:wlan2g";
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g {
+ gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:wlan5g";
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wps {
+ gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:wps";
+ };
+
+ voip {
+ gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:voip";
+ };
+
+ s1 {
+ gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:s1";
+ };
+
+ s2 {
+ gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:s2";
+ };
+
+ s3 {
+ gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:s3";
+ };
+
+ s4 {
+ gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:blue:s4";
+ };
+
+ signal {
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ label = "rtl30vw:red:signal";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ /*"n25q128a11" is required for proper nand recognition in u-boot. */
+ compatible = "jedec,spi-nor", "n25q128a11";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "0:APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "0:ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "0:BOOTCONFIG";
+ reg = <0x180000 0x10000>;
+ read-only;
+ };
+ };
+ };
+
+ flash@1 {
+ /*
+ * Factory U-boot looks in 0:BOOTCONFIG partition for active
+ * partitions settings and mangle partition config. So kernel
+ * /kernel_1 and rootfs/rootfs_1 pairs can be swaped.
+ * It isn't a problem but we never can be sure where OFW put
+ * factory images. "spinand,mt29f" value is required for proper
+ * nand recognition in u-boot.
+ */
+ compatible = "spi-nand","spinand,mt29f";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@400000 {
+ label = "rootfs";
+ reg = <0x400000 0x2000000>;
+ };
+
+ partition@2400000 {
+ label = "kernel_1";
+ reg = <0x2400000 0x400000>;
+ };
+
+ partition@2800000 {
+ label = "rootfs_1";
+ reg = <0x2800000 0x2000000>;
+ };
+
+ partition@4800000 {
+ label = "ubifs";
+ reg = <0x4800000 0x3800000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio54", "gpio59";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "cellc,rtl30vw";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "cellc,rtl30vw";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "qcom-ipq4019-u4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Unielec U4019 (32M)";
+ compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <24000000>;
+ broken-flash-reset;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+ partition@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+ partition@f0000 {
+ label = "0:APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+ partition@170000 {
+ label = "0:ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+ partition@180000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x180000 0x1e80000>;
+ };
+ };
+ };
+};
+
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ compatible = "unielec,u4019","qcom,ipq4019";
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2000>;
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+
+ dwc3@6000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+ };
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ serial0 = &blsp1_uart1;
+ serial1 = &blsp1_uart2;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ led_status: led2 {
+ label = "u4019:green:led2";
+ gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&blsp1_uart2 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial_0_pins: serial0-pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+ serial_1_pins: serial1_pinmux {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ led_pins: led_pinmux {
+ mux {
+ function = "gpio";
+ pins = "gpio68";
+ bias-disabled;
+ output-low;
+ };
+ };
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+};
+
+&wifi1 {
+ status = "okay";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Compex WPJ419";
+ compatible = "compex,wpj419", "qcom,ipq4019";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ reserved-memory {
+ ranges;
+ rsvd1@87000000 {
+ /* Reserved for other subsystem */
+ reg = <0x87000000 0x500000>;
+ no-map;
+ };
+ wifi_dump@87500000 {
+ reg = <0x87500000 0x600000>;
+ no-map;
+ };
+
+ rsvd2@87B00000 {
+ /* Reserved for other subsystem */
+ reg = <0x87B00000 0x500000>;
+ no-map;
+ };
+ };
+
+ chosen {
+ bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused";
+ };
+
+ soc {
+ pinctrl@1000000 {
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial_0_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ serial_1_pins: serial1_pinmux {
+ mux {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ bias-disable;
+ };
+
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12";
+ bias-disable;
+ output-high;
+ };
+ };
+
+ i2c_0_pins: i2c_0_pinmux {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "blsp_i2c0";
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+
+ led_0_pins: led0_pinmux {
+ mux_1 {
+ pins = "gpio36";
+ function = "led0";
+ bias-pull-down;
+ };
+ mux_2 {
+ pins = "gpio40";
+ function = "led4";
+ bias-pull-down;
+ };
+ };
+ };
+
+ blsp_dma: dma@7884000 {
+ status = "okay";
+ };
+
+ spi_0: spi@78b5000 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
+ num-cs = <2>;
+
+ flash0@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <24000000>;
+ broken-flash-reset;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x040000 0x020000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x060000 0x060000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0x0c0000 0x010000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0x0d0000 0x010000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0x0e0000 0x010000>;
+ };
+
+ partition@f0000 {
+ label = "u-boot";
+ reg = <0x0f0000 0x080000>;
+ read-only;
+ };
+
+ partition@170000 {
+ label = "0:ART";
+ reg = <0x170000 0x010000>;
+ read-only;
+ };
+ };
+ };
+
+ nand@1 {
+ reg = <1>;
+ status = "okay";
+ compatible = "spi-nand";
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* The device has 128MB, but we can only address
+ * 64MB because of the bootloader's default settings.
+ * This is due to the old mt29f driver,
+ * which detected the deivce with only 64MB
+ */
+ partition@0 {
+ label = "ubi";
+ reg = <0x0000000 0x4000000>;
+ };
+ };
+ };
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <5000>;
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ i2c_0: i2c@78b7000 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@78af000 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@78b0000 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ usb3_ss_phy: ssphy@9a000 {
+ status = "okay";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ status = "okay";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "okay";
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ status = "okay";
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
+
+ cryptobam: dma@8e04000 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ switch_lan_bmp = <0x1e>;
+ switch_wan_bmp = <0x20>;
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ qpic_bam: dma@7984000 {
+ status = "okay";
+ };
+
+ pcie0: pci@40000000 {
+ status = "okay";
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ };
+
+ nand: qpic-nand@79b0000 {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <2 0x20>;
+};
+
+&gmac1 {
+ qcom,phy_mdio_addr = <3>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <1 0x10>;
+};
+
+&wifi0 {
+ status = "okay";
+};
+
+&wifi1 {
+ status = "okay";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017, Christian Mehlis <christian@m3hlis.de>
+ * Copyright (c) 2017-2018, Sven Eckelmann <sven.eckelmann@openmesh.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Compex WPJ428";
+ compatible = "compex,wpj428";
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2000>;
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ switch_lan_bmp = <0x10>;
+ switch_wan_bmp = <0x20>;
+
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ aliases {
+ led-boot = &status;
+ led-failsafe = &status;
+ led-upgrade = &status;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status: rss4 {
+ label = "wpj428:green:rss4";
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ rss3 {
+ label = "wpj428:green:rss3";
+ gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ beeper: beeper {
+ compatible = "gpio-beeper";
+ gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio53";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_2 {
+ pins = "gpio52";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition0@0 {
+ label = "0:SBL1";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition1@40000 {
+ label = "0:MIBIB";
+ reg = <0x00040000 0x00020000>;
+ read-only;
+ };
+ partition2@60000 {
+ label = "0:QSEE";
+ reg = <0x00060000 0x00060000>;
+ read-only;
+ };
+ partition3@c0000 {
+ label = "0:CDT";
+ reg = <0x000c0000 0x00010000>;
+ read-only;
+ };
+ partition4@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0x000d0000 0x00010000>;
+ read-only;
+ };
+ partition5@e0000 {
+ label = "0:APPSBLENV"; /* uboot env*/
+ reg = <0x000e0000 0x00010000>;
+ read-only;
+ };
+ partition5@f0000 {
+ label = "0:APPSBL"; /* uboot */
+ reg = <0x000f0000 0x00080000>;
+ read-only;
+ };
+ partition5@170000 {
+ label = "0:ART";
+ reg = <0x00170000 0x00010000>;
+ read-only;
+ };
+ partition6@180000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x00180000 0x01e80000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <2 0x20>;
+};
+
+&gmac1 {
+ qcom,phy_mdio_addr = <3>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <1 0x10>;
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+};
+
+&wifi1 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Aruba AP-303";
+ compatible = "aruba,ap-303";
+
+ aliases {
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi_green {
+ label = "ap-303:green:wifi";
+ gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_amber {
+ label = "ap-303:amber:wifi";
+ gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ led_system_red: system_red {
+ label = "ap-303:red:system";
+ gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_green: system_green {
+ label = "ap-303:green:system";
+ gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ /*
+ * In addition to the Pins listed below,
+ * the following GPIOs have "features":
+ * 54 - out - active low to force HW reset
+ * 41 - out - active low to reset TPM
+ * 43 - out - active low to reset BLE radio
+ * 19 - in - active high when DC powered
+ */
+
+ phy-reset {
+ line-name = "PHY-reset";
+ gpios = <42 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * There is no partition map for the NOR flash
+ * in the stock firmware.
+ *
+ * All partitions here are based on offsets
+ * found in the U-Boot GPL code and information
+ * from smem.
+ */
+
+ partition@0 {
+ label = "sbl1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "mibib";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "qsee";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "cdt";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "ddrparams";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "ART";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "appsbl";
+ reg = <0xf0000 0xf0000>;
+ read-only;
+ };
+
+ partition@1e0000 {
+ label = "mfginfo";
+ reg = <0x1e0000 0x10000>;
+ read-only;
+ };
+
+ partition@1f0000 {
+ label = "apcd";
+ reg = <0x1f0000 0x10000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "osss";
+ reg = <0x200000 0x180000>;
+ read-only;
+ };
+
+ partition@380000 {
+ /* This is empty */
+ label = "appsblenv";
+ reg = <0x380000 0x10000>;
+ read-only;
+ };
+
+ partition@390000 {
+ label = "pds";
+ reg = <0x390000 0x10000>;
+ read-only;
+ };
+
+ partition@3a0000 {
+ label = "fcache";
+ reg = <0x3a0000 0x10000>;
+ read-only;
+ };
+
+ partition@3b0000 {
+ /* Called osss1 in smem */
+ label = "u-boot-env-bak";
+ reg = <0x3b0000 0x10000>;
+ read-only;
+ };
+
+ partition@3f0000 {
+ label = "u-boot-env";
+ reg = <0x3f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Aruba AP-303H";
+ compatible = "aruba,ap-303h";
+
+ aliases {
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_amber;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2000>;
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ i2c_0: i2c@78b7000 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ tpm@29 {
+ /* No Driver */
+ compatible = "atmel,at97sc3203";
+ reg = <0x29>;
+ read-only;
+ };
+
+ power-monitor@40 {
+ /* No driver */
+ compatible = "isl,isl28022";
+ reg = <0x40>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wifi_green {
+ label = "ap-303h:green:wifi";
+ gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wifi_amber {
+ label = "ap-303h:amber:wifi";
+ gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ pse {
+ label = "ap-303h:green:pse";
+ gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_red: system_red {
+ label = "ap-303h:red:system";
+ gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_green: system_green {
+ label = "ap-303h:green:system";
+ gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system_amber: system_amber {
+ label = "ap-303h:amber:system";
+ gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&blsp1_uart2 {
+ /* Texas Instruments CC2540T BLE radio */
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ /*
+ * In addition to the Pins listed below,
+ * the following GPIOs have "features":
+ * 39 - out - active low to force HW reset
+ * 32 - out - active low to reset TPM
+ * 43 - out - active low to reset BLE radio
+ * 41 - out - pulse to set warm reset status
+ * 34 - out - active low to enable PSE port
+ * 22 - in - active low when 802.3at powered
+ * 29 - in - active high when DC powered
+ * 40 - in - active low when reset due to cold HW reset
+ * 30 - in - active low when USB overcurrent detected
+ * 35 - in - interrupt line for power monitor chip
+ * 31 - in - active low when PSE port active
+ */
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio12", "gpio59";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ i2c_0_pins: i2c_0_pinmux {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "blsp_i2c0";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ serial_0_pins: serial_0_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ serial_1_pins: serial_1_pinmux {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ usb-power {
+ line-name = "USB-power";
+ gpios = <23 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * There is no partition map for the NOR flash
+ * in the stock firmware.
+ *
+ * All partitions here are based on offsets
+ * found in the U-Boot GPL code and information
+ * from smem.
+ */
+
+ partition@0 {
+ label = "sbl1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "mibib";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "qsee";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "cdt";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "ddrparams";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "appsblenv";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "appsbl";
+ reg = <0xf0000 0x100000>;
+ read-only;
+ };
+
+ partition@1e0000 {
+ label = "ART";
+ reg = <0x1f0000 0x10000>;
+ read-only;
+ };
+
+ partition@1f0000 {
+ label = "osss";
+ reg = <0x200000 0x170000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "pds";
+ reg = <0x370000 0x10000>;
+ read-only;
+ };
+
+ partition@380000 {
+ label = "apcd";
+ reg = <0x380000 0x10000>;
+ read-only;
+ };
+
+ partition@390000 {
+ label = "mfginfo";
+ reg = <0x390000 0x10000>;
+ read-only;
+ };
+
+ partition@3a0000 {
+ label = "fcache";
+ reg = <0x3a0000 0x10000>;
+ read-only;
+ };
+
+ partition@3b0000 {
+ /* Called osss1 in smem */
+ label = "u-boot-env-bak";
+ reg = <0x3b0000 0x10000>;
+ read-only;
+ };
+
+ partition@3f0000 {
+ label = "u-boot-env";
+ reg = <0x3c0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+
+ flash@1 {
+ status = "okay";
+
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ /* 'aos0' in Aruba firmware */
+ label = "aos0";
+ reg = <0x0 0x2000000>;
+ read-only;
+ };
+
+ partition@2000000 {
+ /* 'aos1' in Aruba firmware */
+ label = "ubi";
+ reg = <0x2000000 0x2000000>;
+ };
+
+ partition@4000000 {
+ label = "aruba-ubifs";
+ reg = <0x4000000 0x4000000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Aruba-AP-303";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Aruba-AP-303";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Aruba AP-365";
+ compatible = "aruba,ap-365";
+
+ aliases {
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_red;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system_red: system_red {
+ label = "ap-365:red:system";
+ gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
+ };
+
+ led_system_green: system_green {
+ label = "ap-365:green:system";
+ gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+ };
+
+ system_amber {
+ label = "ap-365:amber:system";
+ gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <1000>;
+ always-running;
+ };
+};
+
+&tlmm {
+ /*
+ * In addition to the Pins listed below,
+ * the following GPIOs have "features":
+ * 39 - out - pulse low to reset watchdog status flipflop
+ * 40 - out - active high to enable watchdog
+ * 41 - out - watchdog poke
+ * 42 - out - active low to reset BLE radio
+ * 43 - out - active low to reset TPM
+ * 47 - out - pulse low to reset warm reset status
+ * 54 - out - active low to force HW reset
+ * 18 - in - PHY interrupt line
+ * 45 - in - power monitor interrupt
+ * 48 - in - active low when cold reset
+ * 52 - in - active high when watchdog reset
+ */
+
+ phy-reset {
+ line-name = "PHY-reset";
+ gpios = <42 GPIO_ACTIVE_HIGH>;
+ gpio-hog;
+ output-high;
+ };
+};
+
+&i2c_0 {
+ power-monitor@40 {
+ /* No driver */
+ compatible = "isl,isl28022";
+ reg = <0x40>;
+ };
+
+ temperature-sensor@48 {
+ compatible = "adi,ad7416";
+ reg = <0x48>;
+ };
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * There is no partition map for the NOR flash
+ * in the stock firmware.
+ *
+ * All partitions here are based on offsets
+ * found in the U-Boot GPL code and information
+ * from smem.
+ */
+
+ partition@0 {
+ label = "sbl1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "mibib";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "qsee";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "cdt";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "ddrparams";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "u-boot-env";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "appsbl";
+ reg = <0xf0000 0x100000>;
+ read-only;
+ };
+
+ partition@1f0000 {
+ label = "ART";
+ reg = <0x1f0000 0x10000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "osss";
+ reg = <0x200000 0x170000>;
+ read-only;
+ };
+
+ partition@370000 {
+ label = "pds";
+ reg = <0x370000 0x10000>;
+ read-only;
+ };
+
+ partition@380000 {
+ label = "apcd";
+ reg = <0x380000 0x10000>;
+ read-only;
+ };
+
+ partition@390000 {
+ label = "mfginfo";
+ reg = <0x390000 0x10000>;
+ read-only;
+ };
+
+ partition@3a0000 {
+ label = "fcache";
+ reg = <0x3a0000 0x10000>;
+ read-only;
+ };
+
+ partition@3b0000 {
+ label = "osss1";
+ reg = <0x3b0000 0x50000>;
+ read-only;
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+
+ /delete-node/ ethernet-phy@0;
+ /delete-node/ ethernet-phy@2;
+ /delete-node/ ethernet-phy@3;
+ /delete-node/ ethernet-phy@4;
+
+ ethernet-phy@5 {
+ reg = <0x5>;
+ };
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
+ switch_lan_bmp = <0x0>; /* lan port bitmap */
+ switch_wan_bmp = <0x10>; /* wan port bitmap */
+ };
+
+ edma@c080000 {
+ qcom,single-phy;
+ qcom,num_gmac = <1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+ };
+
+ i2c_0: i2c@78b7000 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ tpm@29 {
+ /* No Driver */
+ compatible = "atmel,at97sc3203";
+ reg = <0x29>;
+ read-only;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ /* Texas Instruments CC2540T BLE radio */
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&blsp1_uart2 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <5>;
+ qcom,poll_required = <1>;
+ vlan_tag = <0 0x20>;
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ i2c_0_pins: i2c_0_pinmux {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c0";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ serial_0_pins: serial_0_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ serial_1_pins: serial_1_pinmux {
+ mux {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ /* 'aos0' in Aruba firmware */
+ label = "aos0";
+ reg = <0x0 0x2000000>;
+ read-only;
+ };
+
+ partition@2000000 {
+ /* 'aos1' in Aruba firmware */
+ label = "ubi";
+ reg = <0x2000000 0x2000000>;
+ };
+
+ partition@4000000 {
+ label = "aruba-ubifs";
+ reg = <0x4000000 0x4000000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Aruba-AP-303";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Aruba-AP-303";
+};
--- /dev/null
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "GL.iNet GL-B1300";
+ compatible = "glinet,gl-b1300";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2@60f8800 {
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ switch_lan_bmp = <0x18>;
+ switch_wan_bmp = <0x20>;
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "gl-b1300:green:power";
+ gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ mesh {
+ label = "gl-b1300:green:mesh";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "gl-b1300:green:wlan";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ mx25l25635f@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ MIBIB@40000 {
+ label = "MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ QSEE@60000 {
+ label = "QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+
+ CDT@c0000 {
+ label = "CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+
+ DDRPARAMS@d0000 {
+ label = "DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+
+ APPSBLENV@e0000 {
+ label = "APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+
+ APPSBL@f0000 {
+ label = "APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+
+ ART@170000 {
+ label = "ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+
+ firmware@180000 {
+ compatible = "denx,fit";
+ label = "firmware";
+ reg = <0x180000 0x1e80000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio54";
+ };
+ pinconf {
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "GL-B1300";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "GL-B1300";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Meraki MR33 (Stinkbug)
+ *
+ * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
+ * Copyright (C) 2017 Christian Lamparter <chunkeey@googlemail.com>
+ *
+ * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "Meraki MR33 Access Point";
+ compatible = "meraki,mr33";
+
+ aliases {
+ led-boot = &status_green;
+ led-failsafe = &status_red;
+ led-running = &status_green;
+ led-upgrade = &power_orange;
+ };
+
+ /* Do we really need this defined? */
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ };
+
+ /* It is a 56-bit counter that supplies the count to the ARM arch
+ timers and without upstream driver */
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ serial@78b0000 {
+ pinctrl-0 = <&serial_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,cc2650";
+ enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
+ switch_lan_bmp = <0x0>; /* lan port bitmap */
+ switch_wan_bmp = <0x10>; /* wan port bitmap */
+ };
+
+ edma@c080000 {
+ qcom,single-phy;
+ qcom,num_gmac = <1>;
+ phy-mode = "rgmii-rxid";
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_orange: power {
+ label = "mr33:orange:power";
+ gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <1>;
+ qcom,poll_required = <1>;
+ vlan_tag = <0 0x20>;
+};
+
+&blsp1_i2c3 {
+ pinctrl-0 = <&i2c_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ at24@50 {
+ compatible = "atmel,24c64";
+ pagesize = <32>;
+ reg = <0x50>;
+ read-only; /* This holds our MAC & Meraki board-data */
+ };
+};
+
+&blsp1_i2c4 {
+ pinctrl-0 = <&i2c_1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ led-controller@30 {
+ compatible = "ti,lp5562";
+ reg = <0x30>;
+ clock-mode = /bits/8 <2>;
+ enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+
+ /* RGB led */
+ status_red: chan0 {
+ chan-name = "mr33:red:status";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ status_green: chan1 {
+ chan-name = "mr33:green:status";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ chan2 {
+ chan-name = "mr33:blue:status";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ chan3 {
+ chan-name = "mr33:white:status";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+ };
+};
+
+&nand {
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "sbl1";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@100000 {
+ label = "mibib";
+ reg = <0x00100000 0x00100000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "bootconfig";
+ reg = <0x00200000 0x00100000>;
+ read-only;
+ };
+ partition@300000 {
+ label = "qsee";
+ reg = <0x00300000 0x00100000>;
+ read-only;
+ };
+ partition@400000 {
+ label = "qsee_alt";
+ reg = <0x00400000 0x00100000>;
+ read-only;
+ };
+ partition@500000 {
+ label = "cdt";
+ reg = <0x00500000 0x00080000>;
+ read-only;
+ };
+ partition@580000 {
+ label = "cdt_alt";
+ reg = <0x00580000 0x00080000>;
+ read-only;
+ };
+ partition@600000 {
+ label = "ddrparams";
+ reg = <0x00600000 0x00080000>;
+ read-only;
+ };
+ partition@700000 {
+ label = "u-boot";
+ reg = <0x00700000 0x00200000>;
+ read-only;
+ };
+ partition@900000 {
+ label = "u-boot-backup";
+ reg = <0x00900000 0x00200000>;
+ read-only;
+ };
+ partition@b00000 {
+ label = "ART";
+ reg = <0x00b00000 0x00080000>;
+ read-only;
+ };
+ partition@c00000 {
+ label = "ubi";
+ reg = <0x00c00000 0x07000000>;
+ /*
+ * Do not try to allocate the remaining
+ * 4 MiB to this ubi partition. It will
+ * confuse the u-boot and it might not
+ * find the kernel partition anymore.
+ */
+ };
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
+ wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
+
+ bridge@0,0 {
+ reg = <0x00000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ wifi2: wifi@1,0 {
+ compatible = "qcom,ath10k";
+ status = "okay";
+ reg = <0x00010000 0 0 0 0>;
+ };
+ };
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&tlmm {
+ /*
+ * GPIO43 should be 0/1 whenever the unit is
+ * powered through PoE or AC-Adapter.
+ * That said, playing with this seems to
+ * reset the AP.
+ */
+
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial_0_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ serial_1_pins: serial1_pinmux {
+ mux {
+ /* We use the i2c-0 pins for serial_1 */
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+
+ i2c_0_pins: i2c_0_pinmux {
+ pinmux {
+ function = "blsp_i2c0";
+ pins = "gpio20", "gpio21";
+ };
+ pinconf {
+ pins = "gpio20", "gpio21";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ i2c_1_pins: i2c_1_pinmux {
+ pinmux {
+ function = "blsp_i2c1";
+ pins = "gpio34", "gpio35";
+ };
+ pinconf {
+ pins = "gpio34", "gpio35";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ nand_pins: nand_pins {
+ /*
+ * There are 18 pins. 15 pins are common between LCD and NAND.
+ * The QPIC controller arbitrates between LCD and NAND. Of the
+ * remaining 4, 2 are for NAND and 2 are for LCD exclusively.
+ *
+ * The meraki source hints that the bluetooth module claims
+ * pin 52 as well. But sadly, there's no data whenever this
+ * is a NAND or LCD exclusive pin or not.
+ */
+
+ pullups {
+ pins = "gpio52", "gpio53", "gpio58",
+ "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio60", "gpio61",
+ "gpio62", "gpio63", "gpio64",
+ "gpio65", "gpio66", "gpio67",
+ "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+};
+
+&wifi0 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Meraki-MR33";
+};
+
+&wifi1 {
+ status = "okay";
+ qcom,ath10k-calibration-variant = "Meraki-MR33";
+};
projects / openwrt / staging / lynxis.git / commitdiff