--- /dev/null
--- /dev/null
- - - error = copy_to_user(buf, tsdata->raw_buffer + *off, read);
- - - if (!error)
- - - *off += read;
+ + /*
+ + * Copyright (C) 2012 Simon Budig, <simon.budig@kernelconcepts.de>
+ + *
+ + * This software is licensed under the terms of the GNU General Public
+ + * License version 2, as published by the Free Software Foundation, and
+ + * may be copied, distributed, and modified under those terms.
+ + *
+ + * This program is distributed in the hope that it will be useful,
+ + * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ + * GNU General Public License for more details.
+ + *
+ + * You should have received a copy of the GNU General Public
+ + * License along with this library; if not, write to the Free Software
+ + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ + */
+ +
+ + /*
+ + * This is a driver for the EDT "Polytouch" family of touch controllers
+ + * based on the FocalTech FT5x06 line of chips.
+ + *
+ + * Development of this driver has been sponsored by Glyn:
+ + * http://www.glyn.com/Products/Displays
+ + */
+ +
+ + #include <linux/module.h>
+ + #include <linux/ratelimit.h>
+ + #include <linux/interrupt.h>
+ + #include <linux/input.h>
+ + #include <linux/i2c.h>
+ + #include <linux/uaccess.h>
+ + #include <linux/delay.h>
+ + #include <linux/debugfs.h>
+ + #include <linux/slab.h>
+ + #include <linux/gpio.h>
+ + #include <linux/input/mt.h>
+ + #include <linux/input/edt-ft5x06.h>
+ +
+ + #define MAX_SUPPORT_POINTS 5
+ +
+ + #define WORK_REGISTER_THRESHOLD 0x00
+ + #define WORK_REGISTER_REPORT_RATE 0x08
+ + #define WORK_REGISTER_GAIN 0x30
+ + #define WORK_REGISTER_OFFSET 0x31
+ + #define WORK_REGISTER_NUM_X 0x33
+ + #define WORK_REGISTER_NUM_Y 0x34
+ +
+ + #define WORK_REGISTER_OPMODE 0x3c
+ + #define FACTORY_REGISTER_OPMODE 0x01
+ +
+ + #define TOUCH_EVENT_DOWN 0x00
+ + #define TOUCH_EVENT_UP 0x01
+ + #define TOUCH_EVENT_ON 0x02
+ + #define TOUCH_EVENT_RESERVED 0x03
+ +
+ + #define EDT_NAME_LEN 23
+ + #define EDT_SWITCH_MODE_RETRIES 10
+ + #define EDT_SWITCH_MODE_DELAY 5 /* msec */
+ + #define EDT_RAW_DATA_RETRIES 100
+ + #define EDT_RAW_DATA_DELAY 1 /* msec */
+ +
+ + struct edt_ft5x06_ts_data {
+ + struct i2c_client *client;
+ + struct input_dev *input;
+ + u16 num_x;
+ + u16 num_y;
+ +
+ + #if defined(CONFIG_DEBUG_FS)
+ + struct dentry *debug_dir;
+ + u8 *raw_buffer;
+ + size_t raw_bufsize;
+ + #endif
+ +
+ + struct mutex mutex;
+ + bool factory_mode;
+ + int threshold;
+ + int gain;
+ + int offset;
+ + int report_rate;
+ +
+ + char name[EDT_NAME_LEN];
+ + };
+ +
+ + static int edt_ft5x06_ts_readwrite(struct i2c_client *client,
+ + u16 wr_len, u8 *wr_buf,
+ + u16 rd_len, u8 *rd_buf)
+ + {
+ + struct i2c_msg wrmsg[2];
+ + int i = 0;
+ + int ret;
+ +
+ + if (wr_len) {
+ + wrmsg[i].addr = client->addr;
+ + wrmsg[i].flags = 0;
+ + wrmsg[i].len = wr_len;
+ + wrmsg[i].buf = wr_buf;
+ + i++;
+ + }
+ + if (rd_len) {
+ + wrmsg[i].addr = client->addr;
+ + wrmsg[i].flags = I2C_M_RD;
+ + wrmsg[i].len = rd_len;
+ + wrmsg[i].buf = rd_buf;
+ + i++;
+ + }
+ +
+ + ret = i2c_transfer(client->adapter, wrmsg, i);
+ + if (ret < 0)
+ + return ret;
+ + if (ret != i)
+ + return -EIO;
+ +
+ + return 0;
+ + }
+ +
+ + static bool edt_ft5x06_ts_check_crc(struct edt_ft5x06_ts_data *tsdata,
+ + u8 *buf, int buflen)
+ + {
+ + int i;
+ + u8 crc = 0;
+ +
+ + for (i = 0; i < buflen - 1; i++)
+ + crc ^= buf[i];
+ +
+ + if (crc != buf[buflen-1]) {
+ + dev_err_ratelimited(&tsdata->client->dev,
+ + "crc error: 0x%02x expected, got 0x%02x\n",
+ + crc, buf[buflen-1]);
+ + return false;
+ + }
+ +
+ + return true;
+ + }
+ +
+ + static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
+ + {
+ + struct edt_ft5x06_ts_data *tsdata = dev_id;
+ + struct device *dev = &tsdata->client->dev;
+ + u8 cmd = 0xf9;
+ + u8 rdbuf[26];
+ + int i, type, x, y, id;
+ + int error;
+ +
+ + memset(rdbuf, 0, sizeof(rdbuf));
+ +
+ + error = edt_ft5x06_ts_readwrite(tsdata->client,
+ + sizeof(cmd), &cmd,
+ + sizeof(rdbuf), rdbuf);
+ + if (error) {
+ + dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
+ + error);
+ + goto out;
+ + }
+ +
+ + if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa || rdbuf[2] != 26) {
+ + dev_err_ratelimited(dev, "Unexpected header: %02x%02x%02x!\n",
+ + rdbuf[0], rdbuf[1], rdbuf[2]);
+ + goto out;
+ + }
+ +
+ + if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, 26))
+ + goto out;
+ +
+ + for (i = 0; i < MAX_SUPPORT_POINTS; i++) {
+ + u8 *buf = &rdbuf[i * 4 + 5];
+ + bool down;
+ +
+ + type = buf[0] >> 6;
+ + /* ignore Reserved events */
+ + if (type == TOUCH_EVENT_RESERVED)
+ + continue;
+ +
+ + x = ((buf[0] << 8) | buf[1]) & 0x0fff;
+ + y = ((buf[2] << 8) | buf[3]) & 0x0fff;
+ + id = (buf[2] >> 4) & 0x0f;
+ + down = (type != TOUCH_EVENT_UP);
+ +
+ + input_mt_slot(tsdata->input, id);
+ + input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER, down);
+ +
+ + if (!down)
+ + continue;
+ +
+ + input_report_abs(tsdata->input, ABS_MT_POSITION_X, x);
+ + input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y);
+ + }
+ +
+ + input_mt_report_pointer_emulation(tsdata->input, true);
+ + input_sync(tsdata->input);
+ +
+ + out:
+ + return IRQ_HANDLED;
+ + }
+ +
+ + static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
+ + u8 addr, u8 value)
+ + {
+ + u8 wrbuf[4];
+ +
+ + wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
+ + wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
+ + wrbuf[2] = value;
+ + wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
+ +
+ + return edt_ft5x06_ts_readwrite(tsdata->client, 4, wrbuf, 0, NULL);
+ + }
+ +
+ + static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
+ + u8 addr)
+ + {
+ + u8 wrbuf[2], rdbuf[2];
+ + int error;
+ +
+ + wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
+ + wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
+ + wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40;
+ +
+ + error = edt_ft5x06_ts_readwrite(tsdata->client, 2, wrbuf, 2, rdbuf);
+ + if (error)
+ + return error;
+ +
+ + if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) {
+ + dev_err(&tsdata->client->dev,
+ + "crc error: 0x%02x expected, got 0x%02x\n",
+ + wrbuf[0] ^ wrbuf[1] ^ rdbuf[0], rdbuf[1]);
+ + return -EIO;
+ + }
+ +
+ + return rdbuf[0];
+ + }
+ +
+ + struct edt_ft5x06_attribute {
+ + struct device_attribute dattr;
+ + size_t field_offset;
+ + u8 limit_low;
+ + u8 limit_high;
+ + u8 addr;
+ + };
+ +
+ + #define EDT_ATTR(_field, _mode, _addr, _limit_low, _limit_high) \
+ + struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = { \
+ + .dattr = __ATTR(_field, _mode, \
+ + edt_ft5x06_setting_show, \
+ + edt_ft5x06_setting_store), \
+ + .field_offset = \
+ + offsetof(struct edt_ft5x06_ts_data, _field), \
+ + .limit_low = _limit_low, \
+ + .limit_high = _limit_high, \
+ + .addr = _addr, \
+ + }
+ +
+ + static ssize_t edt_ft5x06_setting_show(struct device *dev,
+ + struct device_attribute *dattr,
+ + char *buf)
+ + {
+ + struct i2c_client *client = to_i2c_client(dev);
+ + struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+ + struct edt_ft5x06_attribute *attr =
+ + container_of(dattr, struct edt_ft5x06_attribute, dattr);
+ + u8 *field = (u8 *)((char *)tsdata + attr->field_offset);
+ + int val;
+ + size_t count = 0;
+ + int error = 0;
+ +
+ + mutex_lock(&tsdata->mutex);
+ +
+ + if (tsdata->factory_mode) {
+ + error = -EIO;
+ + goto out;
+ + }
+ +
+ + val = edt_ft5x06_register_read(tsdata, attr->addr);
+ + if (val < 0) {
+ + error = val;
+ + dev_err(&tsdata->client->dev,
+ + "Failed to fetch attribute %s, error %d\n",
+ + dattr->attr.name, error);
+ + goto out;
+ + }
+ +
+ + if (val != *field) {
+ + dev_warn(&tsdata->client->dev,
+ + "%s: read (%d) and stored value (%d) differ\n",
+ + dattr->attr.name, val, *field);
+ + *field = val;
+ + }
+ +
+ + count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
+ + out:
+ + mutex_unlock(&tsdata->mutex);
+ + return error ?: count;
+ + }
+ +
+ + static ssize_t edt_ft5x06_setting_store(struct device *dev,
+ + struct device_attribute *dattr,
+ + const char *buf, size_t count)
+ + {
+ + struct i2c_client *client = to_i2c_client(dev);
+ + struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+ + struct edt_ft5x06_attribute *attr =
+ + container_of(dattr, struct edt_ft5x06_attribute, dattr);
+ + u8 *field = (u8 *)((char *)tsdata + attr->field_offset);
+ + unsigned int val;
+ + int error;
+ +
+ + mutex_lock(&tsdata->mutex);
+ +
+ + if (tsdata->factory_mode) {
+ + error = -EIO;
+ + goto out;
+ + }
+ +
+ + error = kstrtouint(buf, 0, &val);
+ + if (error)
+ + goto out;
+ +
+ + if (val < attr->limit_low || val > attr->limit_high) {
+ + error = -ERANGE;
+ + goto out;
+ + }
+ +
+ + error = edt_ft5x06_register_write(tsdata, attr->addr, val);
+ + if (error) {
+ + dev_err(&tsdata->client->dev,
+ + "Failed to update attribute %s, error: %d\n",
+ + dattr->attr.name, error);
+ + goto out;
+ + }
+ +
+ + *field = val;
+ +
+ + out:
+ + mutex_unlock(&tsdata->mutex);
+ + return error ?: count;
+ + }
+ +
+ + static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, 0, 31);
+ + static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, 0, 31);
+ + static EDT_ATTR(threshold, S_IWUSR | S_IRUGO,
+ + WORK_REGISTER_THRESHOLD, 20, 80);
+ + static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO,
+ + WORK_REGISTER_REPORT_RATE, 3, 14);
+ +
+ + static struct attribute *edt_ft5x06_attrs[] = {
+ + &edt_ft5x06_attr_gain.dattr.attr,
+ + &edt_ft5x06_attr_offset.dattr.attr,
+ + &edt_ft5x06_attr_threshold.dattr.attr,
+ + &edt_ft5x06_attr_report_rate.dattr.attr,
+ + NULL
+ + };
+ +
+ + static const struct attribute_group edt_ft5x06_attr_group = {
+ + .attrs = edt_ft5x06_attrs,
+ + };
+ +
+ + #ifdef CONFIG_DEBUG_FS
+ + static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
+ + {
+ + struct i2c_client *client = tsdata->client;
+ + int retries = EDT_SWITCH_MODE_RETRIES;
+ + int ret;
+ + int error;
+ +
+ + disable_irq(client->irq);
+ +
+ + if (!tsdata->raw_buffer) {
+ + tsdata->raw_bufsize = tsdata->num_x * tsdata->num_y *
+ + sizeof(u16);
+ + tsdata->raw_buffer = kzalloc(tsdata->raw_bufsize, GFP_KERNEL);
+ + if (!tsdata->raw_buffer) {
+ + error = -ENOMEM;
+ + goto err_out;
+ + }
+ + }
+ +
+ + /* mode register is 0x3c when in the work mode */
+ + error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03);
+ + if (error) {
+ + dev_err(&client->dev,
+ + "failed to switch to factory mode, error %d\n", error);
+ + goto err_out;
+ + }
+ +
+ + tsdata->factory_mode = true;
+ + do {
+ + mdelay(EDT_SWITCH_MODE_DELAY);
+ + /* mode register is 0x01 when in factory mode */
+ + ret = edt_ft5x06_register_read(tsdata, FACTORY_REGISTER_OPMODE);
+ + if (ret == 0x03)
+ + break;
+ + } while (--retries > 0);
+ +
+ + if (retries == 0) {
+ + dev_err(&client->dev, "not in factory mode after %dms.\n",
+ + EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
+ + error = -EIO;
+ + goto err_out;
+ + }
+ +
+ + return 0;
+ +
+ + err_out:
+ + kfree(tsdata->raw_buffer);
+ + tsdata->raw_buffer = NULL;
+ + tsdata->factory_mode = false;
+ + enable_irq(client->irq);
+ +
+ + return error;
+ + }
+ +
+ + static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
+ + {
+ + struct i2c_client *client = tsdata->client;
+ + int retries = EDT_SWITCH_MODE_RETRIES;
+ + int ret;
+ + int error;
+ +
+ + /* mode register is 0x01 when in the factory mode */
+ + error = edt_ft5x06_register_write(tsdata, FACTORY_REGISTER_OPMODE, 0x1);
+ + if (error) {
+ + dev_err(&client->dev,
+ + "failed to switch to work mode, error: %d\n", error);
+ + return error;
+ + }
+ +
+ + tsdata->factory_mode = false;
+ +
+ + do {
+ + mdelay(EDT_SWITCH_MODE_DELAY);
+ + /* mode register is 0x01 when in factory mode */
+ + ret = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OPMODE);
+ + if (ret == 0x01)
+ + break;
+ + } while (--retries > 0);
+ +
+ + if (retries == 0) {
+ + dev_err(&client->dev, "not in work mode after %dms.\n",
+ + EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
+ + tsdata->factory_mode = true;
+ + return -EIO;
+ + }
+ +
+ + if (tsdata->raw_buffer)
+ + kfree(tsdata->raw_buffer);
+ + tsdata->raw_buffer = NULL;
+ +
+ + /* restore parameters */
+ + edt_ft5x06_register_write(tsdata, WORK_REGISTER_THRESHOLD,
+ + tsdata->threshold);
+ + edt_ft5x06_register_write(tsdata, WORK_REGISTER_GAIN,
+ + tsdata->gain);
+ + edt_ft5x06_register_write(tsdata, WORK_REGISTER_OFFSET,
+ + tsdata->offset);
+ + edt_ft5x06_register_write(tsdata, WORK_REGISTER_REPORT_RATE,
+ + tsdata->report_rate);
+ +
+ + enable_irq(client->irq);
+ +
+ + return 0;
+ + }
+ +
+ + static int edt_ft5x06_debugfs_mode_get(void *data, u64 *mode)
+ + {
+ + struct edt_ft5x06_ts_data *tsdata = data;
+ +
+ + *mode = tsdata->factory_mode;
+ +
+ + return 0;
+ + };
+ +
+ + static int edt_ft5x06_debugfs_mode_set(void *data, u64 mode)
+ + {
+ + struct edt_ft5x06_ts_data *tsdata = data;
+ + int retval = 0;
+ +
+ + if (mode > 1)
+ + return -ERANGE;
+ +
+ + mutex_lock(&tsdata->mutex);
+ +
+ + if (mode != tsdata->factory_mode) {
+ + retval = mode ? edt_ft5x06_factory_mode(tsdata) :
+ + edt_ft5x06_work_mode(tsdata);
+ + }
+ +
+ + mutex_unlock(&tsdata->mutex);
+ +
+ + return retval;
+ + };
+ +
+ + DEFINE_SIMPLE_ATTRIBUTE(debugfs_mode_fops, edt_ft5x06_debugfs_mode_get,
+ + edt_ft5x06_debugfs_mode_set, "%llu\n");
+ +
+ + static int edt_ft5x06_debugfs_raw_data_open(struct inode *inode,
+ + struct file *file)
+ + {
+ + file->private_data = inode->i_private;
+ +
+ + return 0;
+ + }
+ +
+ + static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file,
+ + char __user *buf, size_t count, loff_t *off)
+ + {
+ + struct edt_ft5x06_ts_data *tsdata = file->private_data;
+ + struct i2c_client *client = tsdata->client;
+ + int retries = EDT_RAW_DATA_RETRIES;
+ + int val, i, error;
+ + size_t read = 0;
+ + int colbytes;
+ + char wrbuf[3];
+ + u8 *rdbuf;
+ +
+ + if (*off < 0 || *off >= tsdata->raw_bufsize)
+ + return 0;
+ +
+ + mutex_lock(&tsdata->mutex);
+ +
+ + if (!tsdata->factory_mode || !tsdata->raw_buffer) {
+ + error = -EIO;
+ + goto out;
+ + }
+ +
+ + error = edt_ft5x06_register_write(tsdata, 0x08, 0x01);
+ + if (error) {
+ + dev_dbg(&client->dev,
+ + "failed to write 0x08 register, error %d\n", error);
+ + goto out;
+ + }
+ +
+ + do {
+ + msleep(EDT_RAW_DATA_DELAY);
+ + val = edt_ft5x06_register_read(tsdata, 0x08);
+ + if (val < 1)
+ + break;
+ + } while (--retries > 0);
+ +
+ + if (val < 0) {
+ + error = val;
+ + dev_dbg(&client->dev,
+ + "failed to read 0x08 register, error %d\n", error);
+ + goto out;
+ + }
+ +
+ + if (retries == 0) {
+ + dev_dbg(&client->dev,
+ + "timed out waiting for register to settle\n");
+ + error = -ETIMEDOUT;
+ + goto out;
+ + }
+ +
+ + rdbuf = tsdata->raw_buffer;
+ + colbytes = tsdata->num_y * sizeof(u16);
+ +
+ + wrbuf[0] = 0xf5;
+ + wrbuf[1] = 0x0e;
+ + for (i = 0; i < tsdata->num_x; i++) {
+ + wrbuf[2] = i; /* column index */
+ + error = edt_ft5x06_ts_readwrite(tsdata->client,
+ + sizeof(wrbuf), wrbuf,
+ + colbytes, rdbuf);
+ + if (error)
+ + goto out;
+ +
+ + rdbuf += colbytes;
+ + }
+ +
+ + read = min_t(size_t, count, tsdata->raw_bufsize - *off);
-- -- - error = input_mt_init_slots(input, MAX_SUPPORT_POINTS);
+ + +++ if (copy_to_user(buf, tsdata->raw_buffer + *off, read)) {
+ + +++ error = -EFAULT;
+ + +++ goto out;
+ + +++ }
+ + +++
+ + +++ *off += read;
+ + out:
+ + mutex_unlock(&tsdata->mutex);
+ + return error ?: read;
+ + };
+ +
+ +
+ + static const struct file_operations debugfs_raw_data_fops = {
+ + .open = edt_ft5x06_debugfs_raw_data_open,
+ + .read = edt_ft5x06_debugfs_raw_data_read,
+ + };
+ +
+ + static void __devinit
+ + edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+ + const char *debugfs_name)
+ + {
+ + tsdata->debug_dir = debugfs_create_dir(debugfs_name, NULL);
+ + if (!tsdata->debug_dir)
+ + return;
+ +
+ + debugfs_create_u16("num_x", S_IRUSR, tsdata->debug_dir, &tsdata->num_x);
+ + debugfs_create_u16("num_y", S_IRUSR, tsdata->debug_dir, &tsdata->num_y);
+ +
+ + debugfs_create_file("mode", S_IRUSR | S_IWUSR,
+ + tsdata->debug_dir, tsdata, &debugfs_mode_fops);
+ + debugfs_create_file("raw_data", S_IRUSR,
+ + tsdata->debug_dir, tsdata, &debugfs_raw_data_fops);
+ + }
+ +
+ + static void __devexit
+ + edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+ + {
+ + if (tsdata->debug_dir)
+ + debugfs_remove_recursive(tsdata->debug_dir);
+ + +++ kfree(tsdata->raw_buffer);
+ + }
+ +
+ + #else
+ +
+ + static inline void
+ + edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+ + const char *debugfs_name)
+ + {
+ + }
+ +
+ + static inline void
+ + edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+ + {
+ + }
+ +
+ + #endif /* CONFIG_DEBUGFS */
+ +
+ +
+ +
+ + static int __devinit edt_ft5x06_ts_reset(struct i2c_client *client,
+ + int reset_pin)
+ + {
+ + int error;
+ +
+ + if (gpio_is_valid(reset_pin)) {
+ + /* this pulls reset down, enabling the low active reset */
+ + error = gpio_request_one(reset_pin, GPIOF_OUT_INIT_LOW,
+ + "edt-ft5x06 reset");
+ + if (error) {
+ + dev_err(&client->dev,
+ + "Failed to request GPIO %d as reset pin, error %d\n",
+ + reset_pin, error);
+ + return error;
+ + }
+ +
+ + mdelay(50);
+ + gpio_set_value(reset_pin, 1);
+ + mdelay(100);
+ + }
+ +
+ + return 0;
+ + }
+ +
+ + static int __devinit edt_ft5x06_ts_identify(struct i2c_client *client,
+ + char *model_name,
+ + char *fw_version)
+ + {
+ + u8 rdbuf[EDT_NAME_LEN];
+ + char *p;
+ + int error;
+ +
+ + error = edt_ft5x06_ts_readwrite(client, 1, "\xbb",
+ + EDT_NAME_LEN - 1, rdbuf);
+ + if (error)
+ + return error;
+ +
+ + /* remove last '$' end marker */
+ + rdbuf[EDT_NAME_LEN - 1] = '\0';
+ + if (rdbuf[EDT_NAME_LEN - 2] == '$')
+ + rdbuf[EDT_NAME_LEN - 2] = '\0';
+ +
+ + /* look for Model/Version separator */
+ + p = strchr(rdbuf, '*');
+ + if (p)
+ + *p++ = '\0';
+ +
+ + strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN);
+ + strlcpy(fw_version, p ? p : "", EDT_NAME_LEN);
+ +
+ + return 0;
+ + }
+ +
+ + #define EDT_ATTR_CHECKSET(name, reg) \
+ + if (pdata->name >= edt_ft5x06_attr_##name.limit_low && \
+ + pdata->name <= edt_ft5x06_attr_##name.limit_high) \
+ + edt_ft5x06_register_write(tsdata, reg, pdata->name)
+ +
+ + static void __devinit
+ + edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata,
+ + const struct edt_ft5x06_platform_data *pdata)
+ + {
+ + if (!pdata->use_parameters)
+ + return;
+ +
+ + /* pick up defaults from the platform data */
+ + EDT_ATTR_CHECKSET(threshold, WORK_REGISTER_THRESHOLD);
+ + EDT_ATTR_CHECKSET(gain, WORK_REGISTER_GAIN);
+ + EDT_ATTR_CHECKSET(offset, WORK_REGISTER_OFFSET);
+ + EDT_ATTR_CHECKSET(report_rate, WORK_REGISTER_REPORT_RATE);
+ + }
+ +
+ + static void __devinit
+ + edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
+ + {
+ + tsdata->threshold = edt_ft5x06_register_read(tsdata,
+ + WORK_REGISTER_THRESHOLD);
+ + tsdata->gain = edt_ft5x06_register_read(tsdata, WORK_REGISTER_GAIN);
+ + tsdata->offset = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OFFSET);
+ + tsdata->report_rate = edt_ft5x06_register_read(tsdata,
+ + WORK_REGISTER_REPORT_RATE);
+ + tsdata->num_x = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_X);
+ + tsdata->num_y = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_Y);
+ + }
+ +
+ + static int __devinit edt_ft5x06_ts_probe(struct i2c_client *client,
+ + const struct i2c_device_id *id)
+ + {
+ + const struct edt_ft5x06_platform_data *pdata =
+ + client->dev.platform_data;
+ + struct edt_ft5x06_ts_data *tsdata;
+ + struct input_dev *input;
+ + int error;
+ + char fw_version[EDT_NAME_LEN];
+ +
+ + dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n");
+ +
+ + if (!pdata) {
+ + dev_err(&client->dev, "no platform data?\n");
+ + return -EINVAL;
+ + }
+ +
+ + error = edt_ft5x06_ts_reset(client, pdata->reset_pin);
+ + if (error)
+ + return error;
+ +
+ + if (gpio_is_valid(pdata->irq_pin)) {
+ + error = gpio_request_one(pdata->irq_pin,
+ + GPIOF_IN, "edt-ft5x06 irq");
+ + if (error) {
+ + dev_err(&client->dev,
+ + "Failed to request GPIO %d, error %d\n",
+ + pdata->irq_pin, error);
+ + return error;
+ + }
+ + }
+ +
+ + tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
+ + input = input_allocate_device();
+ + if (!tsdata || !input) {
+ + dev_err(&client->dev, "failed to allocate driver data.\n");
+ + error = -ENOMEM;
+ + goto err_free_mem;
+ + }
+ +
+ + mutex_init(&tsdata->mutex);
+ + tsdata->client = client;
+ + tsdata->input = input;
+ + tsdata->factory_mode = false;
+ +
+ + error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version);
+ + if (error) {
+ + dev_err(&client->dev, "touchscreen probe failed\n");
+ + goto err_free_mem;
+ + }
+ +
+ + edt_ft5x06_ts_get_defaults(tsdata, pdata);
+ + edt_ft5x06_ts_get_parameters(tsdata);
+ +
+ + dev_dbg(&client->dev,
+ + "Model \"%s\", Rev. \"%s\", %dx%d sensors\n",
+ + tsdata->name, fw_version, tsdata->num_x, tsdata->num_y);
+ +
+ + input->name = tsdata->name;
+ + input->id.bustype = BUS_I2C;
+ + input->dev.parent = &client->dev;
+ +
+ + __set_bit(EV_SYN, input->evbit);
+ + __set_bit(EV_KEY, input->evbit);
+ + __set_bit(EV_ABS, input->evbit);
+ + __set_bit(BTN_TOUCH, input->keybit);
+ + input_set_abs_params(input, ABS_X, 0, tsdata->num_x * 64 - 1, 0, 0);
+ + input_set_abs_params(input, ABS_Y, 0, tsdata->num_y * 64 - 1, 0, 0);
+ + input_set_abs_params(input, ABS_MT_POSITION_X,
+ + 0, tsdata->num_x * 64 - 1, 0, 0);
+ + input_set_abs_params(input, ABS_MT_POSITION_Y,
+ + 0, tsdata->num_y * 64 - 1, 0, 0);
- - - kfree(tsdata->raw_buffer);
+++++++ error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
+ + if (error) {
+ + dev_err(&client->dev, "Unable to init MT slots.\n");
+ + goto err_free_mem;
+ + }
+ +
+ + input_set_drvdata(input, tsdata);
+ + i2c_set_clientdata(client, tsdata);
+ +
+ + error = request_threaded_irq(client->irq, NULL, edt_ft5x06_ts_isr,
+ + IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ + client->name, tsdata);
+ + if (error) {
+ + dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+ + goto err_free_mem;
+ + }
+ +
+ + error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+ + if (error)
+ + goto err_free_irq;
+ +
+ + error = input_register_device(input);
+ + if (error)
+ + goto err_remove_attrs;
+ +
+ + edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
+ + device_init_wakeup(&client->dev, 1);
+ +
+ + dev_dbg(&client->dev,
+ + "EDT FT5x06 initialized: IRQ pin %d, Reset pin %d.\n",
+ + pdata->irq_pin, pdata->reset_pin);
+ +
+ + return 0;
+ +
+ + err_remove_attrs:
+ + sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+ + err_free_irq:
+ + free_irq(client->irq, tsdata);
+ + err_free_mem:
+ + input_free_device(input);
+ + kfree(tsdata);
+ +
+ + if (gpio_is_valid(pdata->irq_pin))
+ + gpio_free(pdata->irq_pin);
+ +
+ + return error;
+ + }
+ +
+ + static int __devexit edt_ft5x06_ts_remove(struct i2c_client *client)
+ + {
+ + const struct edt_ft5x06_platform_data *pdata =
+ + dev_get_platdata(&client->dev);
+ + struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+ +
+ + edt_ft5x06_ts_teardown_debugfs(tsdata);
+ + sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+ +
+ + free_irq(client->irq, tsdata);
+ + input_unregister_device(tsdata->input);
+ +
+ + if (gpio_is_valid(pdata->irq_pin))
+ + gpio_free(pdata->irq_pin);
+ + if (gpio_is_valid(pdata->reset_pin))
+ + gpio_free(pdata->reset_pin);
+ +
+ + kfree(tsdata);
+ +
+ + return 0;
+ + }
+ +
+ + #ifdef CONFIG_PM_SLEEP
+ + static int edt_ft5x06_ts_suspend(struct device *dev)
+ + {
+ + struct i2c_client *client = to_i2c_client(dev);
+ +
+ + if (device_may_wakeup(dev))
+ + enable_irq_wake(client->irq);
+ +
+ + return 0;
+ + }
+ +
+ + static int edt_ft5x06_ts_resume(struct device *dev)
+ + {
+ + struct i2c_client *client = to_i2c_client(dev);
+ +
+ + if (device_may_wakeup(dev))
+ + disable_irq_wake(client->irq);
+ +
+ + return 0;
+ + }
+ + #endif
+ +
+ + static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
+ + edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
+ +
+ + static const struct i2c_device_id edt_ft5x06_ts_id[] = {
+ + { "edt-ft5x06", 0 },
+ + { }
+ + };
+ + MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
+ +
+ + static struct i2c_driver edt_ft5x06_ts_driver = {
+ + .driver = {
+ + .owner = THIS_MODULE,
+ + .name = "edt_ft5x06",
+ + .pm = &edt_ft5x06_ts_pm_ops,
+ + },
+ + .id_table = edt_ft5x06_ts_id,
+ + .probe = edt_ft5x06_ts_probe,
+ + .remove = __devexit_p(edt_ft5x06_ts_remove),
+ + };
+ +
+ + module_i2c_driver(edt_ft5x06_ts_driver);
+ +
+ + MODULE_AUTHOR("Simon Budig <simon.budig@kernelconcepts.de>");
+ + MODULE_DESCRIPTION("EDT FT5x06 I2C Touchscreen Driver");
+ + MODULE_LICENSE("GPL");
projects / openwrt / staging / blogic.git / commitdiff