}
/* Write a OV519 register */
-static int reg_w(struct sd *sd, u16 index, u16 value)
+static void reg_w(struct sd *sd, u16 index, u16 value)
{
int ret, req = 0;
+ if (sd->gspca_dev.usb_err < 0)
+ return;
+
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
if (ret < 0) {
err("Write reg 0x%04x -> [0x%02x] failed",
value, index);
- return ret;
+ sd->gspca_dev.usb_err = ret;
+ return;
}
PDEBUG(D_USBO, "Write reg 0x%04x -> [0x%02x]", value, index);
- return 0;
}
/* Read from a OV519 register, note not valid for the w9968cf!! */
int ret;
int req;
+ if (sd->gspca_dev.usb_err < 0)
+ return -1;
+
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
if (ret >= 0) {
ret = sd->gspca_dev.usb_buf[0];
PDEBUG(D_USBI, "Read reg [0x%02X] -> 0x%04X", index, ret);
- } else
+ } else {
err("Read reg [0x%02x] failed", index);
+ sd->gspca_dev.usb_err = ret;
+ }
return ret;
}
{
int ret;
+ if (sd->gspca_dev.usb_err < 0)
+ return -1;
+
ret = usb_control_msg(sd->gspca_dev.dev,
usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
1, /* REQ_IO */
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, sd->gspca_dev.usb_buf, 8, 500);
- if (ret >= 0)
+ if (ret >= 0) {
ret = sd->gspca_dev.usb_buf[0];
- else
+ } else {
err("Read reg 8 [0x%02x] failed", index);
+ sd->gspca_dev.usb_err = ret;
+ }
return ret;
}
* that are in the same position as 0's in "mask" are preserved, regardless
* of their respective state in "value".
*/
-static int reg_w_mask(struct sd *sd,
+static void reg_w_mask(struct sd *sd,
u16 index,
u8 value,
u8 mask)
value &= mask; /* Enforce mask on value */
ret = reg_r(sd, index);
if (ret < 0)
- return ret;
+ return;
oldval = ret & ~mask; /* Clear the masked bits */
value |= oldval; /* Set the desired bits */
}
- return reg_w(sd, index, value);
+ reg_w(sd, index, value);
}
/*
* Writes multiple (n) byte value to a single register. Only valid with certain
* registers (0x30 and 0xc4 - 0xce).
*/
-static int ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n)
+static void ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n)
{
int ret;
+ if (sd->gspca_dev.usb_err < 0)
+ return;
+
*((__le32 *) sd->gspca_dev.usb_buf) = __cpu_to_le32(value);
ret = usb_control_msg(sd->gspca_dev.dev,
sd->gspca_dev.usb_buf, n, 500);
if (ret < 0) {
err("Write reg32 [%02x] %08x failed", index, value);
- return ret;
+ sd->gspca_dev.usb_err = ret;
}
-
- return 0;
}
-static int ov511_i2c_w(struct sd *sd, u8 reg, u8 value)
+static void ov511_i2c_w(struct sd *sd, u8 reg, u8 value)
{
int rc, retries;
/* Three byte write cycle */
for (retries = 6; ; ) {
/* Select camera register */
- rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
- if (rc < 0)
- return rc;
+ reg_w(sd, R51x_I2C_SADDR_3, reg);
/* Write "value" to I2C data port of OV511 */
- rc = reg_w(sd, R51x_I2C_DATA, value);
- if (rc < 0)
- return rc;
+ reg_w(sd, R51x_I2C_DATA, value);
/* Initiate 3-byte write cycle */
- rc = reg_w(sd, R511_I2C_CTL, 0x01);
- if (rc < 0)
- return rc;
+ reg_w(sd, R511_I2C_CTL, 0x01);
do {
rc = reg_r(sd, R511_I2C_CTL);
} while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
if (rc < 0)
- return rc;
+ return;
if ((rc & 2) == 0) /* Ack? */
break;
if (--retries < 0) {
PDEBUG(D_USBO, "i2c write retries exhausted");
- return -1;
+ return;
}
}
-
- return 0;
}
static int ov511_i2c_r(struct sd *sd, u8 reg)
/* Two byte write cycle */
for (retries = 6; ; ) {
/* Select camera register */
- rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
- if (rc < 0)
- return rc;
+ reg_w(sd, R51x_I2C_SADDR_2, reg);
/* Initiate 2-byte write cycle */
- rc = reg_w(sd, R511_I2C_CTL, 0x03);
- if (rc < 0)
- return rc;
+ reg_w(sd, R511_I2C_CTL, 0x03);
do {
rc = reg_r(sd, R511_I2C_CTL);
/* Two byte read cycle */
for (retries = 6; ; ) {
/* Initiate 2-byte read cycle */
- rc = reg_w(sd, R511_I2C_CTL, 0x05);
- if (rc < 0)
- return rc;
+ reg_w(sd, R511_I2C_CTL, 0x05);
do {
rc = reg_r(sd, R511_I2C_CTL);
break;
/* I2C abort */
- rc = reg_w(sd, R511_I2C_CTL, 0x10);
- if (rc < 0)
- return rc;
+ reg_w(sd, R511_I2C_CTL, 0x10);
if (--retries < 0) {
PDEBUG(D_USBI, "i2c read retries exhausted");
PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
/* This is needed to make i2c_w() work */
- rc = reg_w(sd, R511_I2C_CTL, 0x05);
- if (rc < 0)
- return rc;
+ reg_w(sd, R511_I2C_CTL, 0x05);
return value;
}
* This is normally only called from i2c_w(). Note that this function
* always succeeds regardless of whether the sensor is present and working.
*/
-static int ov518_i2c_w(struct sd *sd,
+static void ov518_i2c_w(struct sd *sd,
u8 reg,
u8 value)
{
- int rc;
-
PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
/* Select camera register */
- rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
- if (rc < 0)
- return rc;
+ reg_w(sd, R51x_I2C_SADDR_3, reg);
/* Write "value" to I2C data port of OV511 */
- rc = reg_w(sd, R51x_I2C_DATA, value);
- if (rc < 0)
- return rc;
+ reg_w(sd, R51x_I2C_DATA, value);
/* Initiate 3-byte write cycle */
- rc = reg_w(sd, R518_I2C_CTL, 0x01);
- if (rc < 0)
- return rc;
+ reg_w(sd, R518_I2C_CTL, 0x01);
/* wait for write complete */
msleep(4);
- return reg_r8(sd, R518_I2C_CTL);
+ reg_r8(sd, R518_I2C_CTL);
}
/*
*/
static int ov518_i2c_r(struct sd *sd, u8 reg)
{
- int rc, value;
+ int value;
/* Select camera register */
- rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
- if (rc < 0)
- return rc;
+ reg_w(sd, R51x_I2C_SADDR_2, reg);
/* Initiate 2-byte write cycle */
- rc = reg_w(sd, R518_I2C_CTL, 0x03);
- if (rc < 0)
- return rc;
+ reg_w(sd, R518_I2C_CTL, 0x03);
/* Initiate 2-byte read cycle */
- rc = reg_w(sd, R518_I2C_CTL, 0x05);
- if (rc < 0)
- return rc;
+ reg_w(sd, R518_I2C_CTL, 0x05);
value = reg_r(sd, R51x_I2C_DATA);
PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
return value;
}
-static int ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value)
+static void ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value)
{
int ret;
+ if (sd->gspca_dev.usb_err < 0)
+ return;
+
ret = usb_control_msg(sd->gspca_dev.dev,
usb_sndctrlpipe(sd->gspca_dev.dev, 0),
0x02,
if (ret < 0) {
err("i2c 0x%02x -> [0x%02x] failed", value, reg);
- return ret;
+ sd->gspca_dev.usb_err = ret;
}
PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
- return 0;
}
static int ovfx2_i2c_r(struct sd *sd, u8 reg)
{
int ret;
+ if (sd->gspca_dev.usb_err < 0)
+ return -1;
+
ret = usb_control_msg(sd->gspca_dev.dev,
usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
0x03,
if (ret >= 0) {
ret = sd->gspca_dev.usb_buf[0];
PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, ret);
- } else
+ } else {
err("i2c read [0x%02x] failed", reg);
+ sd->gspca_dev.usb_err = ret;
+ }
return ret;
}
-static int i2c_w(struct sd *sd, u8 reg, u8 value)
+static void i2c_w(struct sd *sd, u8 reg, u8 value)
{
- int ret = -1;
-
if (sd->sensor_reg_cache[reg] == value)
- return 0;
+ return;
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
- ret = ov511_i2c_w(sd, reg, value);
+ ov511_i2c_w(sd, reg, value);
break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
case BRIDGE_OV519:
- ret = ov518_i2c_w(sd, reg, value);
+ ov518_i2c_w(sd, reg, value);
break;
case BRIDGE_OVFX2:
- ret = ovfx2_i2c_w(sd, reg, value);
+ ovfx2_i2c_w(sd, reg, value);
break;
case BRIDGE_W9968CF:
- ret = w9968cf_i2c_w(sd, reg, value);
+ w9968cf_i2c_w(sd, reg, value);
break;
}
- if (ret >= 0) {
+ if (sd->gspca_dev.usb_err >= 0) {
/* Up on sensor reset empty the register cache */
if (reg == 0x12 && (value & 0x80))
memset(sd->sensor_reg_cache, -1,
else
sd->sensor_reg_cache[reg] = value;
}
-
- return ret;
}
static int i2c_r(struct sd *sd, u8 reg)
* that are in the same position as 0's in "mask" are preserved, regardless
* of their respective state in "value".
*/
-static int i2c_w_mask(struct sd *sd,
+static void i2c_w_mask(struct sd *sd,
u8 reg,
u8 value,
u8 mask)
value &= mask; /* Enforce mask on value */
rc = i2c_r(sd, reg);
if (rc < 0)
- return rc;
+ return;
oldval = rc & ~mask; /* Clear the masked bits */
value |= oldval; /* Set the desired bits */
- return i2c_w(sd, reg, value);
+ i2c_w(sd, reg, value);
}
/* Temporarily stops OV511 from functioning. Must do this before changing
* registers while the camera is streaming */
-static inline int ov51x_stop(struct sd *sd)
+static inline void ov51x_stop(struct sd *sd)
{
PDEBUG(D_STREAM, "stopping");
sd->stopped = 1;
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
- return reg_w(sd, R51x_SYS_RESET, 0x3d);
+ reg_w(sd, R51x_SYS_RESET, 0x3d);
+ break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
- return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
+ reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
+ break;
case BRIDGE_OV519:
- return reg_w(sd, OV519_R51_RESET1, 0x0f);
+ reg_w(sd, OV519_R51_RESET1, 0x0f);
+ break;
case BRIDGE_OVFX2:
- return reg_w_mask(sd, 0x0f, 0x00, 0x02);
+ reg_w_mask(sd, 0x0f, 0x00, 0x02);
+ break;
case BRIDGE_W9968CF:
- return reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */
+ reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */
+ break;
}
-
- return 0;
}
/* Restarts OV511 after ov511_stop() is called. Has no effect if it is not
* actually stopped (for performance). */
-static inline int ov51x_restart(struct sd *sd)
+static inline void ov51x_restart(struct sd *sd)
{
- int rc;
-
PDEBUG(D_STREAM, "restarting");
if (!sd->stopped)
- return 0;
+ return;
sd->stopped = 0;
/* Reinitialize the stream */
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
- return reg_w(sd, R51x_SYS_RESET, 0x00);
+ reg_w(sd, R51x_SYS_RESET, 0x00);
+ break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
- rc = reg_w(sd, 0x2f, 0x80);
- if (rc < 0)
- return rc;
- return reg_w(sd, R51x_SYS_RESET, 0x00);
+ reg_w(sd, 0x2f, 0x80);
+ reg_w(sd, R51x_SYS_RESET, 0x00);
+ break;
case BRIDGE_OV519:
- return reg_w(sd, OV519_R51_RESET1, 0x00);
+ reg_w(sd, OV519_R51_RESET1, 0x00);
+ break;
case BRIDGE_OVFX2:
- return reg_w_mask(sd, 0x0f, 0x02, 0x02);
+ reg_w_mask(sd, 0x0f, 0x02, 0x02);
+ break;
case BRIDGE_W9968CF:
- return reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */
+ reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */
+ break;
}
-
- return 0;
}
-static int ov51x_set_slave_ids(struct sd *sd, u8 slave);
+static void ov51x_set_slave_ids(struct sd *sd, u8 slave);
/* This does an initial reset of an OmniVision sensor and ensures that I2C
* is synchronized. Returns <0 on failure.
{
int i;
- if (ov51x_set_slave_ids(sd, slave) < 0)
- return -EIO;
+ ov51x_set_slave_ids(sd, slave);
/* Reset the sensor */
- if (i2c_w(sd, 0x12, 0x80) < 0)
- return -EIO;
+ i2c_w(sd, 0x12, 0x80);
/* Wait for it to initialize */
msleep(150);
}
/* Reset the sensor */
- if (i2c_w(sd, 0x12, 0x80) < 0)
- return -EIO;
+ i2c_w(sd, 0x12, 0x80);
+
/* Wait for it to initialize */
msleep(150);
/* Dummy read to sync I2C */
if (i2c_r(sd, 0x00) < 0)
- return -EIO;
+ return -1;
}
- return -EIO;
+ return -1;
}
/* Set the read and write slave IDs. The "slave" argument is the write slave,
* This should not be called from outside the i2c I/O functions.
* Sets I2C read and write slave IDs. Returns <0 for error
*/
-static int ov51x_set_slave_ids(struct sd *sd,
+static void ov51x_set_slave_ids(struct sd *sd,
u8 slave)
{
- int rc;
-
switch (sd->bridge) {
case BRIDGE_OVFX2:
- return reg_w(sd, OVFX2_I2C_ADDR, slave);
+ reg_w(sd, OVFX2_I2C_ADDR, slave);
+ return;
case BRIDGE_W9968CF:
sd->sensor_addr = slave;
- return 0;
+ return;
}
- rc = reg_w(sd, R51x_I2C_W_SID, slave);
- if (rc < 0)
- return rc;
- return reg_w(sd, R51x_I2C_R_SID, slave + 1);
+ reg_w(sd, R51x_I2C_W_SID, slave);
+ reg_w(sd, R51x_I2C_R_SID, slave + 1);
}
-static int write_regvals(struct sd *sd,
+static void write_regvals(struct sd *sd,
const struct ov_regvals *regvals,
int n)
{
- int rc;
-
while (--n >= 0) {
- rc = reg_w(sd, regvals->reg, regvals->val);
- if (rc < 0)
- return rc;
+ reg_w(sd, regvals->reg, regvals->val);
regvals++;
}
- return 0;
}
-static int write_i2c_regvals(struct sd *sd,
- const struct ov_i2c_regvals *regvals,
- int n)
+static void write_i2c_regvals(struct sd *sd,
+ const struct ov_i2c_regvals *regvals,
+ int n)
{
- int rc;
-
while (--n >= 0) {
- rc = i2c_w(sd, regvals->reg, regvals->val);
- if (rc < 0)
- return rc;
+ i2c_w(sd, regvals->reg, regvals->val);
regvals++;
}
- return 0;
}
/****************************************************************************
***************************************************************************/
/* This initializes the OV2x10 / OV3610 / OV3620 */
-static int ov_hires_configure(struct sd *sd)
+static void ov_hires_configure(struct sd *sd)
{
int high, low;
if (sd->bridge != BRIDGE_OVFX2) {
err("error hires sensors only supported with ovfx2");
- return -1;
+ return;
}
PDEBUG(D_PROBE, "starting ov hires configuration");
} else {
err("Error unknown sensor type: 0x%02x%02x",
high, low);
- return -1;
}
-
- /* Set sensor-specific vars */
- return 0;
}
-
/* This initializes the OV8110, OV8610 sensor. The OV8110 uses
* the same register settings as the OV8610, since they are very similar.
*/
-static int ov8xx0_configure(struct sd *sd)
+static void ov8xx0_configure(struct sd *sd)
{
int rc;
rc = i2c_r(sd, OV7610_REG_COM_I);
if (rc < 0) {
PDEBUG(D_ERR, "Error detecting sensor type");
- return -1;
+ return;
}
- if ((rc & 3) == 1) {
+ if ((rc & 3) == 1)
sd->sensor = SEN_OV8610;
- } else {
+ else
err("Unknown image sensor version: %d", rc & 3);
- return -1;
- }
-
- /* Set sensor-specific vars */
- return 0;
}
/* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses
* the same register settings as the OV7610, since they are very similar.
*/
-static int ov7xx0_configure(struct sd *sd)
+static void ov7xx0_configure(struct sd *sd)
{
int rc, high, low;
* it appears to be wrongly detected as a 7610 by default */
if (rc < 0) {
PDEBUG(D_ERR, "Error detecting sensor type");
- return -1;
+ return;
}
if ((rc & 3) == 3) {
/* quick hack to make OV7670s work */
high = i2c_r(sd, 0x0a);
if (high < 0) {
PDEBUG(D_ERR, "Error detecting camera chip PID");
- return high;
+ return;
}
low = i2c_r(sd, 0x0b);
if (low < 0) {
PDEBUG(D_ERR, "Error detecting camera chip VER");
- return low;
+ return;
}
if (high == 0x76) {
switch (low) {
case 0x30:
err("Sensor is an OV7630/OV7635");
err("7630 is not supported by this driver");
- return -1;
+ return;
case 0x40:
PDEBUG(D_PROBE, "Sensor is an OV7645");
sd->sensor = SEN_OV7640; /* FIXME */
break;
default:
PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
- return -1;
+ return;
}
} else {
PDEBUG(D_PROBE, "Sensor is an OV7620");
}
} else {
err("Unknown image sensor version: %d", rc & 3);
- return -1;
}
-
- /* Set sensor-specific vars */
- return 0;
}
/* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */
-static int ov6xx0_configure(struct sd *sd)
+static void ov6xx0_configure(struct sd *sd)
{
int rc;
PDEBUG(D_PROBE, "starting OV6xx0 configuration");
rc = i2c_r(sd, OV7610_REG_COM_I);
if (rc < 0) {
PDEBUG(D_ERR, "Error detecting sensor type");
- return -1;
+ return;
}
/* Ugh. The first two bits are the version bits, but
break;
default:
err("FATAL: Unknown sensor version: 0x%02x", rc);
- return -1;
+ return;
}
/* Set sensor-specific vars */
sd->sif = 1;
-
- return 0;
}
/* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
}
}
-static int ov51x_upload_quan_tables(struct sd *sd)
+static void ov51x_upload_quan_tables(struct sd *sd)
{
const unsigned char yQuanTable511[] = {
0, 1, 1, 2, 2, 3, 3, 4,
const unsigned char *pYTable, *pUVTable;
unsigned char val0, val1;
- int i, size, rc, reg = R51x_COMP_LUT_BEGIN;
+ int i, size, reg = R51x_COMP_LUT_BEGIN;
PDEBUG(D_PROBE, "Uploading quantization tables");
val0 &= 0x0f;
val1 &= 0x0f;
val0 |= val1 << 4;
- rc = reg_w(sd, reg, val0);
- if (rc < 0)
- return rc;
+ reg_w(sd, reg, val0);
val0 = *pUVTable++;
val1 = *pUVTable++;
val0 &= 0x0f;
val1 &= 0x0f;
val0 |= val1 << 4;
- rc = reg_w(sd, reg + size, val0);
- if (rc < 0)
- return rc;
+ reg_w(sd, reg + size, val0);
reg++;
}
-
- return 0;
}
/* This initializes the OV511/OV511+ and the sensor */
-static int ov511_configure(struct gspca_dev *gspca_dev)
+static void ov511_configure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int rc;
/* For 511 and 511+ */
const struct ov_regvals init_511[] = {
PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID));
- rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511));
- if (rc < 0)
- return rc;
+ write_regvals(sd, init_511, ARRAY_SIZE(init_511));
switch (sd->bridge) {
case BRIDGE_OV511:
- rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
- if (rc < 0)
- return rc;
+ write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
break;
case BRIDGE_OV511PLUS:
- rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
- if (rc < 0)
- return rc;
+ write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
break;
}
/* Init compression */
- rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
- if (rc < 0)
- return rc;
-
- rc = ov51x_upload_quan_tables(sd);
- if (rc < 0) {
- PDEBUG(D_ERR, "Error uploading quantization tables");
- return rc;
- }
+ write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
- return 0;
+ ov51x_upload_quan_tables(sd);
}
/* This initializes the OV518/OV518+ and the sensor */
-static int ov518_configure(struct gspca_dev *gspca_dev)
+static void ov518_configure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int rc;
/* For 518 and 518+ */
const struct ov_regvals init_518[] = {
PDEBUG(D_PROBE, "Device revision %d",
0x1f & reg_r(sd, R51x_SYS_CUST_ID));
- rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518));
- if (rc < 0)
- return rc;
+ write_regvals(sd, init_518, ARRAY_SIZE(init_518));
/* Set LED GPIO pin to output mode */
- rc = reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02);
- if (rc < 0)
- return rc;
+ reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02);
switch (sd->bridge) {
case BRIDGE_OV518:
- rc = write_regvals(sd, norm_518, ARRAY_SIZE(norm_518));
- if (rc < 0)
- return rc;
+ write_regvals(sd, norm_518, ARRAY_SIZE(norm_518));
break;
case BRIDGE_OV518PLUS:
- rc = write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p));
- if (rc < 0)
- return rc;
+ write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p));
break;
}
- rc = ov51x_upload_quan_tables(sd);
- if (rc < 0) {
- PDEBUG(D_ERR, "Error uploading quantization tables");
- return rc;
- }
-
- rc = reg_w(sd, 0x2f, 0x80);
- if (rc < 0)
- return rc;
+ ov51x_upload_quan_tables(sd);
- return 0;
+ reg_w(sd, 0x2f, 0x80);
}
-static int ov519_configure(struct sd *sd)
+static void ov519_configure(struct sd *sd)
{
static const struct ov_regvals init_519[] = {
{ 0x5a, 0x6d }, /* EnableSystem */
/* windows reads 0x55 at this point*/
};
- return write_regvals(sd, init_519, ARRAY_SIZE(init_519));
+ write_regvals(sd, init_519, ARRAY_SIZE(init_519));
}
-static int ovfx2_configure(struct sd *sd)
+static void ovfx2_configure(struct sd *sd)
{
static const struct ov_regvals init_fx2[] = {
{ 0x00, 0x60 },
sd->stopped = 1;
- return write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2));
+ write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2));
}
/* this function is called at probe time */
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam = &gspca_dev->cam;
- int ret = 0;
sd->bridge = id->driver_info & BRIDGE_MASK;
sd->invert_led = id->driver_info & BRIDGE_INVERT_LED;
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
- ret = ov511_configure(gspca_dev);
+ ov511_configure(gspca_dev);
break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
- ret = ov518_configure(gspca_dev);
+ ov518_configure(gspca_dev);
break;
case BRIDGE_OV519:
- ret = ov519_configure(sd);
+ ov519_configure(sd);
break;
case BRIDGE_OVFX2:
- ret = ovfx2_configure(sd);
+ ovfx2_configure(sd);
cam->bulk_size = OVFX2_BULK_SIZE;
cam->bulk_nurbs = MAX_NURBS;
cam->bulk = 1;
break;
case BRIDGE_W9968CF:
- ret = w9968cf_configure(sd);
+ w9968cf_configure(sd);
cam->reverse_alts = 1;
break;
}
- if (ret)
- goto error;
-
ov51x_led_control(sd, 0); /* turn LED off */
/* The OV519 must be more aggressive about sensor detection since
/* Test for 76xx */
if (init_ov_sensor(sd, OV7xx0_SID) >= 0) {
- if (ov7xx0_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure OV7xx0");
- goto error;
- }
+ ov7xx0_configure(sd);
+
/* Test for 6xx0 */
} else if (init_ov_sensor(sd, OV6xx0_SID) >= 0) {
- if (ov6xx0_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure OV6xx0");
- goto error;
- }
+ ov6xx0_configure(sd);
+
/* Test for 8xx0 */
} else if (init_ov_sensor(sd, OV8xx0_SID) >= 0) {
- if (ov8xx0_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure OV8xx0");
- goto error;
- }
+ ov8xx0_configure(sd);
+
/* Test for 3xxx / 2xxx */
} else if (init_ov_sensor(sd, OV_HIRES_SID) >= 0) {
- if (ov_hires_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure high res OV");
- goto error;
- }
+ ov_hires_configure(sd);
} else {
err("Can't determine sensor slave IDs");
goto error;
cam->nmodes--;
/* w9968cf needs initialisation once the sensor is known */
- if (w9968cf_init(sd) < 0)
- goto error;
+ w9968cf_init(sd);
break;
}
gspca_dev->cam.ctrls = sd->ctrls;
gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
- return 0;
+ return gspca_dev->usb_err;
error:
PDEBUG(D_ERR, "OV519 Config failed");
return -EINVAL;
/* initialize the sensor */
switch (sd->sensor) {
case SEN_OV2610:
- if (write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610)))
- return -EIO;
+ write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610));
+
/* Enable autogain, autoexpo, awb, bandfilter */
- if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
- return -EIO;
+ i2c_w_mask(sd, 0x13, 0x27, 0x27);
break;
case SEN_OV3610:
- if (write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b)))
- return -EIO;
+ write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b));
+
/* Enable autogain, autoexpo, awb, bandfilter */
- if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
- return -EIO;
+ i2c_w_mask(sd, 0x13, 0x27, 0x27);
break;
case SEN_OV6620:
- if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
- return -EIO;
+ write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20));
break;
case SEN_OV6630:
case SEN_OV66308AF:
sd->ctrls[CONTRAST].def = 200;
/* The default is too low for the ov6630 */
- if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
- return -EIO;
+ write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30));
break;
default:
/* case SEN_OV7610: */
/* case SEN_OV76BE: */
- if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
- return -EIO;
- if (i2c_w_mask(sd, 0x0e, 0x00, 0x40))
- return -EIO;
+ write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610));
+ i2c_w_mask(sd, 0x0e, 0x00, 0x40);
break;
case SEN_OV7620:
case SEN_OV7620AE:
- if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
- return -EIO;
+ write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620));
break;
case SEN_OV7640:
case SEN_OV7648:
- if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
- return -EIO;
+ write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640));
break;
case SEN_OV7670:
sd->ctrls[FREQ].max = 3; /* auto */
sd->ctrls[FREQ].def = 3;
- if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
- return -EIO;
+ write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670));
break;
case SEN_OV8610:
- if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
- return -EIO;
+ write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610));
break;
}
- return 0;
+ return gspca_dev->usb_err;
}
/* Set up the OV511/OV511+ with the given image parameters.
*
* Do not put any sensor-specific code in here (including I2C I/O functions)
*/
-static int ov511_mode_init_regs(struct sd *sd)
+static void ov511_mode_init_regs(struct sd *sd)
{
int hsegs, vsegs, packet_size, fps, needed;
int interlaced = 0;
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
if (!alt) {
err("Couldn't get altsetting");
- return -EIO;
+ sd->gspca_dev.usb_err = -EIO;
+ return;
}
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE);
reg_w(sd, R51x_SYS_RESET, 0);
-
- return 0;
}
/* Sets up the OV518/OV518+ with the given image parameters
*
* Do not put any sensor-specific code in here (including I2C I/O functions)
*/
-static int ov518_mode_init_regs(struct sd *sd)
+static void ov518_mode_init_regs(struct sd *sd)
{
int hsegs, vsegs, packet_size;
struct usb_host_interface *alt;
alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
if (!alt) {
err("Couldn't get altsetting");
- return -EIO;
+ sd->gspca_dev.usb_err = -EIO;
+ return;
}
packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
}
reg_w(sd, 0x2f, 0x80);
-
- return 0;
}
/* Sets up the OV519 with the given image parameters
*
* Do not put any sensor-specific code in here (including I2C I/O functions)
*/
-static int ov519_mode_init_regs(struct sd *sd)
+static void ov519_mode_init_regs(struct sd *sd)
{
static const struct ov_regvals mode_init_519_ov7670[] = {
{ 0x5d, 0x03 }, /* Turn off suspend mode */
/******** Set the mode ********/
if (sd->sensor != SEN_OV7670) {
- if (write_regvals(sd, mode_init_519,
- ARRAY_SIZE(mode_init_519)))
- return -EIO;
+ write_regvals(sd, mode_init_519, ARRAY_SIZE(mode_init_519));
if (sd->sensor == SEN_OV7640 ||
sd->sensor == SEN_OV7648) {
/* Select 8-bit input mode */
reg_w_mask(sd, OV519_R20_DFR, 0x10, 0x10);
}
} else {
- if (write_regvals(sd, mode_init_519_ov7670,
- ARRAY_SIZE(mode_init_519_ov7670)))
- return -EIO;
+ write_regvals(sd, mode_init_519_ov7670,
+ ARRAY_SIZE(mode_init_519_ov7670));
}
reg_w(sd, OV519_R10_H_SIZE, sd->gspca_dev.width >> 4);
}
break;
}
- return 0;
}
-static int mode_init_ov_sensor_regs(struct sd *sd)
+static void mode_init_ov_sensor_regs(struct sd *sd)
{
struct gspca_dev *gspca_dev;
int qvga, xstart, xend, ystart, yend;
i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
- return 0;
+ return;
case SEN_OV3610:
if (qvga) {
xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4);
i2c_w(sd, 0x18, xend >> 4);
i2c_w(sd, 0x19, ystart >> 3);
i2c_w(sd, 0x1a, yend >> 3);
- return 0;
+ return;
case SEN_OV8610:
/* For OV8610 qvga means qsvga */
i2c_w_mask(sd, OV7610_REG_COM_C, qvga ? (1 << 5) : 0, 1 << 5);
i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
break;
default:
- return -EINVAL;
+ return;
}
/******** Clock programming ********/
i2c_w(sd, 0x11, sd->clockdiv);
-
- return 0;
}
static void sethvflip(struct gspca_dev *gspca_dev)
ov51x_restart(sd);
}
-static int set_ov_sensor_window(struct sd *sd)
+static void set_ov_sensor_window(struct sd *sd)
{
struct gspca_dev *gspca_dev;
int qvga, crop;
int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
- int ret;
/* mode setup is fully handled in mode_init_ov_sensor_regs for these */
if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610 ||
- sd->sensor == SEN_OV7670)
- return mode_init_ov_sensor_regs(sd);
-
+ sd->sensor == SEN_OV7670) {
+ mode_init_ov_sensor_regs(sd);
+ return;
+ }
gspca_dev = &sd->gspca_dev;
qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
crop = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 2;
vwsbase = vwebase = 0x03;
break;
default:
- return -EINVAL;
+ return;
}
switch (sd->sensor) {
}
}
- ret = mode_init_ov_sensor_regs(sd);
- if (ret < 0)
- return ret;
+ mode_init_ov_sensor_regs(sd);
i2c_w(sd, 0x17, hwsbase);
i2c_w(sd, 0x18, hwebase + (sd->sensor_width >> hwscale));
i2c_w(sd, 0x19, vwsbase);
i2c_w(sd, 0x1a, vwebase + (sd->sensor_height >> vwscale));
-
- return 0;
}
/* -- start the camera -- */
static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int ret = 0;
/* Default for most bridges, allow bridge_mode_init_regs to override */
sd->sensor_width = sd->gspca_dev.width;
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
- ret = ov511_mode_init_regs(sd);
+ ov511_mode_init_regs(sd);
break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
- ret = ov518_mode_init_regs(sd);
+ ov518_mode_init_regs(sd);
break;
case BRIDGE_OV519:
- ret = ov519_mode_init_regs(sd);
+ ov519_mode_init_regs(sd);
break;
/* case BRIDGE_OVFX2: nothing to do */
case BRIDGE_W9968CF:
- ret = w9968cf_mode_init_regs(sd);
+ w9968cf_mode_init_regs(sd);
break;
}
- if (ret < 0)
- goto out;
- ret = set_ov_sensor_window(sd);
- if (ret < 0)
- goto out;
+ set_ov_sensor_window(sd);
setcontrast(gspca_dev);
setbrightness(gspca_dev);
sd->first_frame = 3;
- ret = ov51x_restart(sd);
- if (ret < 0)
- goto out;
+ ov51x_restart(sd);
ov51x_led_control(sd, 1);
- return 0;
-out:
- PDEBUG(D_ERR, "camera start error:%d", ret);
- return ret;
+ return gspca_dev->usb_err;
}
static void sd_stopN(struct gspca_dev *gspca_dev)
.colorspace = V4L2_COLORSPACE_JPEG},
};
-static int reg_w(struct sd *sd, u16 index, u16 value);
+static void reg_w(struct sd *sd, u16 index, u16 value);
/*--------------------------------------------------------------------------
Write 64-bit data to the fast serial bus registers.
Return 0 on success, -1 otherwise.
--------------------------------------------------------------------------*/
-static int w9968cf_write_fsb(struct sd *sd, u16* data)
+static void w9968cf_write_fsb(struct sd *sd, u16* data)
{
struct usb_device *udev = sd->gspca_dev.dev;
u16 value;
int ret;
+ if (sd->gspca_dev.usb_err < 0)
+ return;
+
value = *data++;
memcpy(sd->gspca_dev.usb_buf, data, 6);
value, 0x06, sd->gspca_dev.usb_buf, 6, 500);
if (ret < 0) {
err("Write FSB registers failed (%d)", ret);
- return ret;
+ sd->gspca_dev.usb_err = ret;
}
-
- return 0;
}
/*--------------------------------------------------------------------------
Write data to the serial bus control register.
Return 0 on success, a negative number otherwise.
--------------------------------------------------------------------------*/
-static int w9968cf_write_sb(struct sd *sd, u16 value)
+static void w9968cf_write_sb(struct sd *sd, u16 value)
{
int ret;
+ if (sd->gspca_dev.usb_err < 0)
+ return;
+
/* We don't use reg_w here, as that would cause all writes when
bitbanging i2c to be logged, making the logs impossible to read */
ret = usb_control_msg(sd->gspca_dev.dev,
if (ret < 0) {
err("Write SB reg [01] %04x failed", value);
- return ret;
+ sd->gspca_dev.usb_err = ret;
}
-
- return 0;
}
/*--------------------------------------------------------------------------
{
int ret;
+ if (sd->gspca_dev.usb_err < 0)
+ return -1;
+
/* We don't use reg_r here, as the w9968cf is special and has 16
bit registers instead of 8 bit */
ret = usb_control_msg(sd->gspca_dev.dev,
1,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, 0x01, sd->gspca_dev.usb_buf, 2, 500);
- if (ret >= 0)
+ if (ret >= 0) {
ret = sd->gspca_dev.usb_buf[0] |
(sd->gspca_dev.usb_buf[1] << 8);
- else
+ } else {
err("Read SB reg [01] failed");
+ sd->gspca_dev.usb_err = ret;
+ }
udelay(W9968CF_I2C_BUS_DELAY);
This function is called by w9968cf_start_transfer().
Return 0 on success, a negative number otherwise.
--------------------------------------------------------------------------*/
-static int w9968cf_upload_quantizationtables(struct sd *sd)
+static void w9968cf_upload_quantizationtables(struct sd *sd)
{
u16 a, b;
- int ret = 0, i, j;
+ int i, j;
- ret += reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */
+ reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */
for (i = 0, j = 0; i < 32; i++, j += 2) {
a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j + 1]) << 8);
reg_w(sd, 0x40 + i, a);
reg_w(sd, 0x60 + i, b);
}
- ret += reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */
-
- return ret;
+ reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */
}
/****************************************************************************
* i2c_adap_read_byte() *
****************************************************************************/
-static int w9968cf_smbus_start(struct sd *sd)
+static void w9968cf_smbus_start(struct sd *sd)
{
- int ret = 0;
-
- ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
- ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-
- return ret;
+ w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+ w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
}
-static int w9968cf_smbus_stop(struct sd *sd)
+static void w9968cf_smbus_stop(struct sd *sd)
{
- int ret = 0;
-
- ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
- ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
- ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
-
- return ret;
+ w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
+ w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+ w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
}
-static int w9968cf_smbus_write_byte(struct sd *sd, u8 v)
+static void w9968cf_smbus_write_byte(struct sd *sd, u8 v)
{
u8 bit;
- int ret = 0, sda;
+ int sda;
for (bit = 0 ; bit < 8 ; bit++) {
sda = (v & 0x80) ? 2 : 0;
v <<= 1;
/* SDE=1, SDA=sda, SCL=0 */
- ret += w9968cf_write_sb(sd, 0x10 | sda);
+ w9968cf_write_sb(sd, 0x10 | sda);
/* SDE=1, SDA=sda, SCL=1 */
- ret += w9968cf_write_sb(sd, 0x11 | sda);
+ w9968cf_write_sb(sd, 0x11 | sda);
/* SDE=1, SDA=sda, SCL=0 */
- ret += w9968cf_write_sb(sd, 0x10 | sda);
+ w9968cf_write_sb(sd, 0x10 | sda);
}
-
- return ret;
}
-static int w9968cf_smbus_read_byte(struct sd *sd, u8* v)
+static void w9968cf_smbus_read_byte(struct sd *sd, u8 *v)
{
u8 bit;
- int ret = 0;
/* No need to ensure SDA is high as we are always called after
read_ack which ends with SDA high */
for (bit = 0 ; bit < 8 ; bit++) {
*v <<= 1;
/* SDE=1, SDA=1, SCL=1 */
- ret += w9968cf_write_sb(sd, 0x0013);
+ w9968cf_write_sb(sd, 0x0013);
*v |= (w9968cf_read_sb(sd) & 0x0008) ? 1 : 0;
/* SDE=1, SDA=1, SCL=0 */
- ret += w9968cf_write_sb(sd, 0x0012);
+ w9968cf_write_sb(sd, 0x0012);
}
-
- return ret;
}
-static int w9968cf_smbus_write_nack(struct sd *sd)
+static void w9968cf_smbus_write_nack(struct sd *sd)
{
- int ret = 0;
-
/* No need to ensure SDA is high as we are always called after
read_byte which ends with SDA high */
- ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
- ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
-
- return ret;
+ w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+ w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
}
-static int w9968cf_smbus_read_ack(struct sd *sd)
+static void w9968cf_smbus_read_ack(struct sd *sd)
{
- int ret = 0, sda;
+ int sda;
/* Ensure SDA is high before raising clock to avoid a spurious stop */
- ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
- ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+ w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+ w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
sda = w9968cf_read_sb(sd);
- ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
- if (sda < 0)
- ret += sda;
- else if (sda & 0x08) {
+ w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+ if (sda >= 0 && (sda & 0x08)) {
PDEBUG(D_USBI, "Did not receive i2c ACK");
- ret += -1;
+ sd->gspca_dev.usb_err = -EIO;
}
-
- return ret;
}
/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
-static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
+static void w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
{
u16* data = (u16 *)sd->gspca_dev.usb_buf;
- int ret = 0;
data[0] = 0x082f | ((sd->sensor_addr & 0x80) ? 0x1500 : 0x0);
data[0] |= (sd->sensor_addr & 0x40) ? 0x4000 : 0x0;
data[3] = 0x1d20 | ((sd->sensor_addr & 0x02) ? 0x0001 : 0x0);
data[3] |= (sd->sensor_addr & 0x01) ? 0x0054 : 0x0;
- ret += w9968cf_write_fsb(sd, data);
+ w9968cf_write_fsb(sd, data);
data[0] = 0x8208 | ((reg & 0x80) ? 0x0015 : 0x0);
data[0] |= (reg & 0x40) ? 0x0540 : 0x0;
data[2] |= (reg & 0x01) ? 0x5400 : 0x0;
data[3] = 0x001d;
- ret += w9968cf_write_fsb(sd, data);
+ w9968cf_write_fsb(sd, data);
data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
data[0] |= (value & 0x40) ? 0x0540 : 0x0;
data[2] |= (value & 0x01) ? 0x5400 : 0x0;
data[3] = 0xfe1d;
- ret += w9968cf_write_fsb(sd, data);
-
- if (!ret)
- PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
- else
- PDEBUG(D_ERR, "i2c 0x%02x -> [0x%02x] failed", value, reg);
+ w9968cf_write_fsb(sd, data);
- return ret;
+ PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
}
/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
u8 value;
/* Fast serial bus data control disable */
- ret += w9968cf_write_sb(sd, 0x0013); /* don't change ! */
-
- ret += w9968cf_smbus_start(sd);
- ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr);
- ret += w9968cf_smbus_read_ack(sd);
- ret += w9968cf_smbus_write_byte(sd, reg);
- ret += w9968cf_smbus_read_ack(sd);
- ret += w9968cf_smbus_stop(sd);
- ret += w9968cf_smbus_start(sd);
- ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr + 1);
- ret += w9968cf_smbus_read_ack(sd);
- ret += w9968cf_smbus_read_byte(sd, &value);
+ w9968cf_write_sb(sd, 0x0013); /* don't change ! */
+
+ w9968cf_smbus_start(sd);
+ w9968cf_smbus_write_byte(sd, sd->sensor_addr);
+ w9968cf_smbus_read_ack(sd);
+ w9968cf_smbus_write_byte(sd, reg);
+ w9968cf_smbus_read_ack(sd);
+ w9968cf_smbus_stop(sd);
+ w9968cf_smbus_start(sd);
+ w9968cf_smbus_write_byte(sd, sd->sensor_addr + 1);
+ w9968cf_smbus_read_ack(sd);
+ w9968cf_smbus_read_byte(sd, &value);
/* signal we don't want to read anymore, the v4l1 driver used to
send an ack here which is very wrong! (and then fixed
the issues this gave by retrying reads) */
- ret += w9968cf_smbus_write_nack(sd);
- ret += w9968cf_smbus_stop(sd);
+ w9968cf_smbus_write_nack(sd);
+ w9968cf_smbus_stop(sd);
/* Fast serial bus data control re-enable */
- ret += w9968cf_write_sb(sd, 0x0030);
+ w9968cf_write_sb(sd, 0x0030);
- if (!ret) {
+ if (sd->gspca_dev.usb_err >= 0) {
ret = value;
PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
} else
Turn on the LED on some webcams. A beep should be heard too.
Return 0 on success, a negative number otherwise.
--------------------------------------------------------------------------*/
-static int w9968cf_configure(struct sd *sd)
+static void w9968cf_configure(struct sd *sd)
{
- int ret = 0;
-
- ret += reg_w(sd, 0x00, 0xff00); /* power-down */
- ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
- ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
- ret += reg_w(sd, 0x01, 0x0010); /* serial bus, SDS high */
- ret += reg_w(sd, 0x01, 0x0000); /* serial bus, SDS low */
- ret += reg_w(sd, 0x01, 0x0010); /* ..high 'beep-beep' */
- ret += reg_w(sd, 0x01, 0x0030); /* Set sda scl to FSB mode */
-
- if (ret)
- PDEBUG(D_ERR, "Couldn't turn on the LED");
+ reg_w(sd, 0x00, 0xff00); /* power-down */
+ reg_w(sd, 0x00, 0xbf17); /* reset everything */
+ reg_w(sd, 0x00, 0xbf10); /* normal operation */
+ reg_w(sd, 0x01, 0x0010); /* serial bus, SDS high */
+ reg_w(sd, 0x01, 0x0000); /* serial bus, SDS low */
+ reg_w(sd, 0x01, 0x0010); /* ..high 'beep-beep' */
+ reg_w(sd, 0x01, 0x0030); /* Set sda scl to FSB mode */
sd->stopped = 1;
-
- return ret;
}
-static int w9968cf_init(struct sd *sd)
+static void w9968cf_init(struct sd *sd)
{
- int ret = 0;
unsigned long hw_bufsize = sd->sif ? (352 * 288 * 2) : (640 * 480 * 2),
y0 = 0x0000,
u0 = y0 + hw_bufsize / 2,
u1 = y1 + hw_bufsize / 2,
v1 = u1 + hw_bufsize / 4;
- ret += reg_w(sd, 0x00, 0xff00); /* power off */
- ret += reg_w(sd, 0x00, 0xbf10); /* power on */
-
- ret += reg_w(sd, 0x03, 0x405d); /* DRAM timings */
- ret += reg_w(sd, 0x04, 0x0030); /* SDRAM timings */
+ reg_w(sd, 0x00, 0xff00); /* power off */
+ reg_w(sd, 0x00, 0xbf10); /* power on */
- ret += reg_w(sd, 0x20, y0 & 0xffff); /* Y buf.0, low */
- ret += reg_w(sd, 0x21, y0 >> 16); /* Y buf.0, high */
- ret += reg_w(sd, 0x24, u0 & 0xffff); /* U buf.0, low */
- ret += reg_w(sd, 0x25, u0 >> 16); /* U buf.0, high */
- ret += reg_w(sd, 0x28, v0 & 0xffff); /* V buf.0, low */
- ret += reg_w(sd, 0x29, v0 >> 16); /* V buf.0, high */
+ reg_w(sd, 0x03, 0x405d); /* DRAM timings */
+ reg_w(sd, 0x04, 0x0030); /* SDRAM timings */
- ret += reg_w(sd, 0x22, y1 & 0xffff); /* Y buf.1, low */
- ret += reg_w(sd, 0x23, y1 >> 16); /* Y buf.1, high */
- ret += reg_w(sd, 0x26, u1 & 0xffff); /* U buf.1, low */
- ret += reg_w(sd, 0x27, u1 >> 16); /* U buf.1, high */
- ret += reg_w(sd, 0x2a, v1 & 0xffff); /* V buf.1, low */
- ret += reg_w(sd, 0x2b, v1 >> 16); /* V buf.1, high */
+ reg_w(sd, 0x20, y0 & 0xffff); /* Y buf.0, low */
+ reg_w(sd, 0x21, y0 >> 16); /* Y buf.0, high */
+ reg_w(sd, 0x24, u0 & 0xffff); /* U buf.0, low */
+ reg_w(sd, 0x25, u0 >> 16); /* U buf.0, high */
+ reg_w(sd, 0x28, v0 & 0xffff); /* V buf.0, low */
+ reg_w(sd, 0x29, v0 >> 16); /* V buf.0, high */
- ret += reg_w(sd, 0x32, y1 & 0xffff); /* JPEG buf 0 low */
- ret += reg_w(sd, 0x33, y1 >> 16); /* JPEG buf 0 high */
+ reg_w(sd, 0x22, y1 & 0xffff); /* Y buf.1, low */
+ reg_w(sd, 0x23, y1 >> 16); /* Y buf.1, high */
+ reg_w(sd, 0x26, u1 & 0xffff); /* U buf.1, low */
+ reg_w(sd, 0x27, u1 >> 16); /* U buf.1, high */
+ reg_w(sd, 0x2a, v1 & 0xffff); /* V buf.1, low */
+ reg_w(sd, 0x2b, v1 >> 16); /* V buf.1, high */
- ret += reg_w(sd, 0x34, y1 & 0xffff); /* JPEG buf 1 low */
- ret += reg_w(sd, 0x35, y1 >> 16); /* JPEG bug 1 high */
+ reg_w(sd, 0x32, y1 & 0xffff); /* JPEG buf 0 low */
+ reg_w(sd, 0x33, y1 >> 16); /* JPEG buf 0 high */
- ret += reg_w(sd, 0x36, 0x0000);/* JPEG restart interval */
- ret += reg_w(sd, 0x37, 0x0804);/*JPEG VLE FIFO threshold*/
- ret += reg_w(sd, 0x38, 0x0000);/* disable hw up-scaling */
- ret += reg_w(sd, 0x3f, 0x0000); /* JPEG/MCTL test data */
+ reg_w(sd, 0x34, y1 & 0xffff); /* JPEG buf 1 low */
+ reg_w(sd, 0x35, y1 >> 16); /* JPEG bug 1 high */
- return ret;
+ reg_w(sd, 0x36, 0x0000);/* JPEG restart interval */
+ reg_w(sd, 0x37, 0x0804);/*JPEG VLE FIFO threshold*/
+ reg_w(sd, 0x38, 0x0000);/* disable hw up-scaling */
+ reg_w(sd, 0x3f, 0x0000); /* JPEG/MCTL test data */
}
-static int w9968cf_set_crop_window(struct sd *sd)
+static void w9968cf_set_crop_window(struct sd *sd)
{
- int ret = 0, start_cropx, start_cropy, x, y, fw, fh, cw, ch,
+ int start_cropx, start_cropy, x, y, fw, fh, cw, ch,
max_width, max_height;
if (sd->sif) {
x = (max_width - cw) / 2;
y = (max_height - ch) / 2;
- ret += reg_w(sd, 0x10, start_cropx + x);
- ret += reg_w(sd, 0x11, start_cropy + y);
- ret += reg_w(sd, 0x12, start_cropx + x + cw);
- ret += reg_w(sd, 0x13, start_cropy + y + ch);
-
- return ret;
+ reg_w(sd, 0x10, start_cropx + x);
+ reg_w(sd, 0x11, start_cropy + y);
+ reg_w(sd, 0x12, start_cropx + x + cw);
+ reg_w(sd, 0x13, start_cropy + y + ch);
}
-static int w9968cf_mode_init_regs(struct sd *sd)
+static void w9968cf_mode_init_regs(struct sd *sd)
{
- int ret = 0, val, vs_polarity, hs_polarity;
+ int val, vs_polarity, hs_polarity;
- ret += w9968cf_set_crop_window(sd);
+ w9968cf_set_crop_window(sd);
- ret += reg_w(sd, 0x14, sd->gspca_dev.width);
- ret += reg_w(sd, 0x15, sd->gspca_dev.height);
+ reg_w(sd, 0x14, sd->gspca_dev.width);
+ reg_w(sd, 0x15, sd->gspca_dev.height);
/* JPEG width & height */
- ret += reg_w(sd, 0x30, sd->gspca_dev.width);
- ret += reg_w(sd, 0x31, sd->gspca_dev.height);
+ reg_w(sd, 0x30, sd->gspca_dev.width);
+ reg_w(sd, 0x31, sd->gspca_dev.height);
/* Y & UV frame buffer strides (in WORD) */
if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
V4L2_PIX_FMT_JPEG) {
- ret += reg_w(sd, 0x2c, sd->gspca_dev.width / 2);
- ret += reg_w(sd, 0x2d, sd->gspca_dev.width / 4);
+ reg_w(sd, 0x2c, sd->gspca_dev.width / 2);
+ reg_w(sd, 0x2d, sd->gspca_dev.width / 4);
} else
- ret += reg_w(sd, 0x2c, sd->gspca_dev.width);
+ reg_w(sd, 0x2c, sd->gspca_dev.width);
- ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
- ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
+ reg_w(sd, 0x00, 0xbf17); /* reset everything */
+ reg_w(sd, 0x00, 0xbf10); /* normal operation */
/* Transfer size in WORDS (for UYVY format only) */
val = sd->gspca_dev.width * sd->gspca_dev.height;
- ret += reg_w(sd, 0x3d, val & 0xffff); /* low bits */
- ret += reg_w(sd, 0x3e, val >> 16); /* high bits */
+ reg_w(sd, 0x3d, val & 0xffff); /* low bits */
+ reg_w(sd, 0x3e, val >> 16); /* high bits */
if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
V4L2_PIX_FMT_JPEG) {
jpeg_define(sd->jpeg_hdr, sd->gspca_dev.height,
sd->gspca_dev.width, 0x22); /* JPEG 420 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
- ret += w9968cf_upload_quantizationtables(sd);
+ w9968cf_upload_quantizationtables(sd);
}
/* Video Capture Control Register */
val |= 0x8000; /* capt. enable */
- ret += reg_w(sd, 0x16, val);
+ reg_w(sd, 0x16, val);
sd->gspca_dev.empty_packet = 0;
-
- return ret;
}
static void w9968cf_stop0(struct sd *sd)
projects / openwrt / staging / blogic.git / commitdiff