--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ compatible = "beeline,smartbox-flash", "mediatek,mt7621-soc";
+ model = "Beeline SmartBox Flash";
+
+ aliases {
+ led-boot = &led_status_red;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "blue:wan";
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_green: led-1 {
+ label = "green:status";
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_red: led-2 {
+ label = "red:status";
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ ubi-concat {
+ compatible = "mtd-concat";
+ devices = <&ubiconcat0 &ubiconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x0 0x5240000>;
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x100000 0x100000>;
+ };
+
+ factory: partition@200000 {
+ label = "Factory";
+ reg = <0x200000 0x100000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_fff0: macaddr@fff0 {
+ reg = <0xfff0 0x6>;
+ };
+ };
+
+ partition@300000 {
+ label = "firmware";
+ reg = <0x300000 0x2000000>;
+
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0x440000>;
+ };
+
+ ubiconcat0: partition@400000 {
+ label = "ubiconcat0";
+ reg = <0x440000 0x1bc0000>;
+ };
+ };
+
+ partition@2300000 {
+ label = "Firmware2";
+ reg = <0x2300000 0x2000000>;
+ read-only;
+ };
+
+ partition@4300000 {
+ label = "glbcfg";
+ reg = <0x4300000 0x200000>;
+ read-only;
+ };
+
+ partition@4500000 {
+ label = "board_data";
+ reg = <0x4500000 0x100000>;
+ read-only;
+ };
+
+ partition@4600000 {
+ label = "glbcfg2";
+ reg = <0x4600000 0x200000>;
+ read-only;
+ };
+
+ partition@4800000 {
+ label = "board_data2";
+ reg = <0x4800000 0x100000>;
+ read-only;
+ };
+
+ ubiconcat1: partition@4900000 {
+ label = "ubiconcat1";
+ reg = <0x4900000 0x3680000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0>;
+ };
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_fff0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&switch0 {
+ ports {
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "jtag";
+ function = "gpio";
+ };
+};
KERNEL_DTB += -d21
DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME
+define Build/beeline-trx
+ echo -ne "hsqs" > $@.hsqs
+ $(STAGING_DIR_HOST)/bin/otrx create $@.trx -M 0x746f435d -f $@ \
+ -a 0x20000 -b 0x420000 -f $@.hsqs -a 1000
+ mv $@.trx $@
+ dd if=/dev/zero bs=1024 count=1 >> $@.tail
+ echo -ne "HDR0" | dd of=$@.tail bs=1 seek=$$((0x10c)) count=4 \
+ conv=notrunc 2>/dev/null
+ dd if=$@.tail >> $@ 2>/dev/null
+ rm $@.hsqs $@.tail
+endef
+
define Build/gemtek-trailer
printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
endef
endef
TARGET_DEVICES += asus_rt-n56u-b1
+define Device/beeline_smartbox-flash
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ DEVICE_VENDOR := Beeline
+ DEVICE_MODEL := SmartBox Flash
+ IMAGE_SIZE := 32768k
+ KERNEL_SIZE := 4352k
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \
+ uImage none | beeline-trx | pad-to $$(KERNEL_SIZE)
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \
+ uImage none
+ IMAGES += factory.trx
+ IMAGE/factory.trx := append-kernel | append-ubi | check-size
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware \
+ uboot-envtools
+endef
+TARGET_DEVICES += beeline_smartbox-flash
+
define Device/buffalo_wsr-1166dhp
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
projects / openwrt / openwrt.git / commitdiff