refresh 2.6.28 patches

SVN-Revision: 15419

diff --git a/target/linux/ar71xx/patches-2.6.28/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.28/003-ar71xx_usb_host.patch
index 43bd4a152b2335edbda87679298d90bf686293e6..53f811bc998b91fac9f7af378310bcb7a26c5f60 100644 (file)
--- a/target/linux/ar71xx/patches-2.6.28/003-ar71xx_usb_host.patch
+++ b/target/linux/ar71xx/patches-2.6.28/003-ar71xx_usb_host.patch
@@ -1,25 +1,27 @@
 --- a/drivers/usb/host/Kconfig
 +++ b/drivers/usb/host/Kconfig
-@@ -81,6 +81,12 @@ config USB_EHCI_BIG_ENDIAN_DESC
+@@ -81,6 +81,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
        depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
        default y
  
 +config USB_EHCI_AR71XX
 +      bool "USB EHCI support for AR71xx"
 +      depends on USB_EHCI_HCD && ATHEROS_AR71XX
++      default y
 +      help
 +        Support for Atheros AR71xx built-in EHCI controller
 +
  config USB_EHCI_FSL
        bool "Support for Freescale on-chip EHCI USB controller"
        depends on USB_EHCI_HCD && FSL_SOC
-@@ -140,6 +146,12 @@ config USB_OHCI_HCD
+@@ -140,6 +147,13 @@ config USB_OHCI_HCD
          To compile this driver as a module, choose M here: the
          module will be called ohci-hcd.
  
 +config USB_OHCI_AR71XX
 +      bool "USB OHCI support for Atheros AR71xx"
 +      depends on USB_OHCI_HCD && ATHEROS_AR71XX
++      default y
 +      help
 +        Support for Atheros AR71xx built-in OHCI controller
 +

diff --git a/target/linux/ar71xx/patches-2.6.28/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.28/101-ksz8041_phy_driver.patch
index 1170b0c839f8e09e17d3f558e93d2135103a4f01..541ae0af3d248e6be014957c10919385a7e0a9d8 100644 (file)
--- a/target/linux/ar71xx/patches-2.6.28/101-ksz8041_phy_driver.patch
+++ b/target/linux/ar71xx/patches-2.6.28/101-ksz8041_phy_driver.patch
@@ -1,8 +1,8 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -80,6 +80,11 @@ config ADM6996_PHY
- config MVSWITCH_PHY
-       tristate "Driver for Marvell 88E6060 switches"
+@@ -84,6 +84,11 @@ config IP175C_PHY
+       tristate "Driver for IC+ IP175C/IP178C switches"
+       select SWCONFIG
  
 +config MICREL_PHY
 +      tristate "Drivers for Micrel/Kendin PHYs"
@@ -14,9 +14,9 @@
        depends on PHYLIB=y
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY)     += icplus.o
- obj-$(CONFIG_ADM6996_PHY)     += adm6996.o
+@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)    += adm6996.o
  obj-$(CONFIG_MVSWITCH_PHY)    += mvswitch.o
+ obj-$(CONFIG_IP175C_PHY)      += ip175c.o
  obj-$(CONFIG_REALTEK_PHY)     += realtek.o
 +obj-$(CONFIG_MICREL_PHY)      += micrel.o
  obj-$(CONFIG_FIXED_PHY)               += fixed.o