kirkwood: set sata/usb led trigger for NSA3xx

these two devices have a Sata led for each sata port.
These leds must be controlled separately by a special
sata led trigger already used in oxnas target.

Both these devices have a single USB led, and to keep
consistent behaviour with the Sata leds that show
sata activity, this led uses usb-host trigger
to show usb activity.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>

diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds
index e6da9fd49a045c0b4eccc311a9d039771773b48e..06084405333fabd88d8f3ff0275c4327f8b93d7f 100755 (executable)
--- a/target/linux/kirkwood/base-files/etc/board.d/01_leds
+++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds
@@ -40,9 +40,15 @@ case "$board" in
        ;;
 "nsa310b")
        ucidef_set_led_default "health" "health" "nsa310:green:sys" "1"
+       ucidef_set_led_usbhost "usb" "USB" "nsa310:green:usb"
+       ucidef_set_led_ataport "hdd" "HDD" "nsa310:green:hdd" "1"
+       ucidef_set_led_ataport "esata" "eSata" "nsa310:green:esata" "2"
        ;;
 "nsa325")
        ucidef_set_led_default "health" "health" "nsa325:green:sys" "1"
+       ucidef_set_led_usbhost "usb" "USB" "nsa325:green:usb"
+       ucidef_set_led_ataport "hdd1" "HDD1" "nsa325:green:sata1" "1"
+       ucidef_set_led_ataport "hdd2" "HDD2" "nsa325:green:sata2" "2"
        ;;
 "sheevaplug" | \
 "sheevaplug-esata")

diff --git a/target/linux/kirkwood/config-4.4 b/target/linux/kirkwood/config-4.4
index f5d3164e61086f3143c4d678aa81e7444d8f1d93..67a876008e2a89476d4356ea57a0ecc4f8a810c0 100644 (file)
--- a/target/linux/kirkwood/config-4.4
+++ b/target/linux/kirkwood/config-4.4
@@ -26,6 +26,7 @@ CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
 CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_WANT_LIBATA_LEDS=y
 CONFIG_ARM=y
 # CONFIG_ARMADA_THERMAL is not set
 CONFIG_ARM_APPENDED_DTB=y
@@ -41,6 +42,7 @@ CONFIG_ARM_PATCH_PHYS_VIRT=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ATA=y
 CONFIG_ATAGS=y
+CONFIG_ATA_LEDS=y
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CACHE_FEROCEON_L2=y
@@ -306,6 +308,7 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_ORION=y
 # CONFIG_USB_EHCI_HCD_PLATFORM is not set
 CONFIG_USB_EHCI_PCI=y
+CONFIG_USB_LED_TRIG=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_SUPPORT=y
 # CONFIG_USB_UHCI_HCD is not set

diff --git a/target/linux/kirkwood/patches-4.4/210-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-4.4/210-enable-sata-port-specific-led-triggers.patch
new file mode 100644 (file)
index 0000000..96c4f7b
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/210-enable-sata-port-specific-led-triggers.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/mach-mvebu/Kconfig
++++ b/arch/arm/mach-mvebu/Kconfig
+@@ -105,6 +105,7 @@ config MACH_DOVE
+ config MACH_KIRKWOOD
+       bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+       select ARCH_REQUIRE_GPIOLIB
++      select ARCH_WANT_LIBATA_LEDS
+       select CPU_FEROCEON
+       select KIRKWOOD_CLK
+       select MACH_MVEBU_ANY