+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "mikrotik,rb750gr3", "mediatek,mt7621-soc";
- model = "MikroTik RouterBOARD 750Gr3";
-
- aliases {
- led-boot = &led_usr;
- led-failsafe = &led_usr;
- led-running = &led_usr;
- led-upgrade = &led_usr;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- pwr {
- label = "rb750gr3:blue:pwr";
- gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- led_usr: usr {
- label = "rb750gr3:green:usr";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- mode {
- label = "mode";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- reset {
- label = "reset";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- beeper {
- compatible = "gpio-beeper";
- gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- usb_power {
- gpio-export,name = "usb_power";
- gpio-export,output = <1>;
- gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "RouterBoot";
- reg = <0x0 0x40000>;
- read-only;
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader1";
- reg = <0x0 0xf000>;
- read-only;
- };
-
- hard_config: partition@f000 {
- label = "hard_config";
- reg = <0xf000 0x1000>;
- read-only;
- };
-
- partition@10000 {
- label = "bootloader2";
- reg = <0x10000 0xf000>;
- read-only;
- };
-
- partition@20000 {
- label = "soft_config";
- reg = <0x20000 0x1000>;
- };
-
- partition@30000 {
- label = "bios";
- reg = <0x30000 0x1000>;
- read-only;
- };
- };
-
- partition@40000 {
- compatible = "mikrotik,minor";
- label = "firmware";
- reg = <0x040000 0xfc0000>;
- };
- };
- };
-};
-
-&gmac0 {
- mtd-mac-address = <&hard_config 0x0010>;
- mtd-mac-address-increment = <1>;
-};
-
-&switch0 {
- ports {
- port@0 {
- status = "okay";
- label = "wan";
- mtd-mac-address = <&hard_config 0x0010>;
- mtd-mac-address-increment = <2>;
- };
-
- port@1 {
- status = "okay";
- label = "lan2";
- };
-
- port@2 {
- status = "okay";
- label = "lan3";
- };
-
- port@3 {
- status = "okay";
- label = "lan4";
- };
-
- port@4 {
- status = "okay";
- label = "lan5";
- };
- };
-};
-
-&state_default {
- gpio {
- /* via gpio7 (uart3 group) the PoE status can be read */
- groups = "uart2", "uart3", "jtag", "wdt";
- function = "gpio";
- };
-};
-
-&sdhci {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "mikrotik,rbm11g", "mediatek,mt7621-soc";
- model = "MikroTik RouterBOARD M11G";
-
- aliases {
- led-boot = &led_usr;
- led-failsafe = &led_usr;
- led-running = &led_usr;
- led-upgrade = &led_usr;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_usr: usr {
- label = "rbm11g:green:usr";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
-
- rssi0 {
- label = "rbm11g:green:rssi0";
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- };
-
- rssi1 {
- label = "rbm11g:green:rssi1";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- };
-
- rssi2 {
- label = "rbm11g:green:rssi2";
- gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
- };
-
- rssi3 {
- label = "rbm11g:green:rssi3";
- gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
- };
-
- rssi4 {
- label = "rbm11g:green:rssi4";
- gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- res {
- label = "reset";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- pcie0_vcc_reg {
- compatible = "regulator-fixed";
- regulator-name = "pcie0_vcc";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&spi0 {
- status = "okay";
-
- w25q128@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- // XXX empiric value to obtain actual 10MHz SCK at the chip
- spi-max-frequency = <3125000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "RouterBoot";
- reg = <0x0 0x40000>;
- read-only;
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader1";
- reg = <0x0 0xf000>;
- read-only;
- };
-
- hard_config: partition@f000 {
- label = "hard_config";
- reg = <0xf000 0x1000>;
- read-only;
- };
-
- partition@10000 {
- label = "bootloader2";
- reg = <0x10000 0xf000>;
- read-only;
- };
-
- partition@20000 {
- label = "soft_config";
- reg = <0x20000 0x1000>;
- };
-
- partition@30000 {
- label = "bios";
- reg = <0x30000 0x1000>;
- read-only;
- };
- };
-
- partition@40000 {
- compatible = "mikrotik,minor";
- label = "firmware";
- reg = <0x040000 0xFC0000>;
- };
- };
- };
-};
-
-&gmac0 {
- mtd-mac-address = <&hard_config 0x0010>;
- mtd-mac-address-increment = <1>;
-};
-
-&switch0 {
- ports {
- port@0 {
- status = "okay";
- label = "lan";
- };
- };
-};
-
-&state_default {
- gpio {
- groups = "uart2", "wdt", "rgmii2";
- function = "gpio";
- };
-};
-
-&i2c {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- compatible = "mikrotik,rbm33g", "mediatek,mt7621-soc";
- model = "MikroTik RouterBOARD M33G";
-
- aliases {
- led-boot = &led_usr;
- led-failsafe = &led_usr;
- led-running = &led_usr;
- led-upgrade = &led_usr;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_usr: usr {
- label = "rbm33g:green:usr";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- res {
- label = "res";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- pcie0_vcc_reg {
- compatible = "regulator-fixed";
- regulator-name = "pcie0_vcc";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- };
-
- pcie1_vcc_reg {
- compatible = "regulator-fixed";
- regulator-name = "pcie1_vcc";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- };
-
- pcie2_vcc_reg {
- compatible = "regulator-fixed";
- regulator-name = "pcie2_vcc";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- };
-
- usb_vcc_reg {
- compatible = "regulator-fixed";
- regulator-name = "usb_vcc";
-
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio 12 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-};
-
-&spi0 {
- status = "okay";
-
- w25q40@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <3125000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "RouterBoot";
- reg = <0x0 0x40000>;
- read-only;
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "bootloader1";
- reg = <0x0 0xf000>;
- read-only;
- };
-
- hard_config: partition@f000 {
- label = "hard_config";
- reg = <0xf000 0x1000>;
- read-only;
- };
-
- partition@10000 {
- label = "bootloader2";
- reg = <0x10000 0xf000>;
- read-only;
- };
-
- partition@20000 {
- label = "soft_config";
- reg = <0x20000 0x1000>;
- };
-
- partition@30000 {
- label = "bios";
- reg = <0x30000 0x1000>;
- read-only;
- };
- };
- };
- };
-
- w25q128@1 {
- compatible = "jedec,spi-nor";
- reg = <1>;
- // XXX empiric value to obtain actual 10MHz SCK at the chip
- spi-max-frequency = <3125000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- // Region <0x0 0x40000> seems reserved by OEM
-
- partition@40000 {
- compatible = "mikrotik,minor";
- label = "firmware";
- reg = <0x040000 0xFC0000>;
- };
- };
- };
-};
-
-&gmac0 {
- mtd-mac-address = <&hard_config 0x0010>;
- mtd-mac-address-increment = <1>;
-};
-
-&switch0 {
- ports {
- port@0 {
- status = "okay";
- label = "wan";
- mtd-mac-address = <&hard_config 0x0010>;
- mtd-mac-address-increment = <2>;
- };
-
- port@1 {
- status = "okay";
- label = "lan1";
- };
-
- port@2 {
- status = "okay";
- label = "lan2";
- };
- };
-};
-
-&state_default {
- gpio {
- groups = "uart2", "wdt";
- function = "gpio";
- };
-};
-
-&sdhci {
- status = "okay";
-};
-
-&i2c {
- status = "okay";
-};
-
-&pcie {
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "mikrotik,routerboard-750gr3", "mediatek,mt7621-soc";
+ model = "MikroTik RouterBOARD 750Gr3";
+
+ aliases {
+ led-boot = &led_usr;
+ led-failsafe = &led_usr;
+ led-running = &led_usr;
+ led-upgrade = &led_usr;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr {
+ label = "routerboard-750gr3:blue:pwr";
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_usr: usr {
+ label = "routerboard-750gr3:green:usr";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ mode {
+ label = "mode";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb_power {
+ gpio-export,name = "usb_power";
+ gpio-export,output = <1>;
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RouterBoot";
+ reg = <0x0 0x40000>;
+ read-only;
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0xf000>;
+ read-only;
+ };
+
+ hard_config: partition@f000 {
+ label = "hard_config";
+ reg = <0xf000 0x1000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0xf000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "soft_config";
+ reg = <0x20000 0x1000>;
+ };
+
+ partition@30000 {
+ label = "bios";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
+ };
+
+ partition@40000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x040000 0xfc0000>;
+ };
+ };
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&hard_config 0x0010>;
+ mtd-mac-address-increment = <1>;
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&hard_config 0x0010>;
+ mtd-mac-address-increment = <2>;
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "lan5";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ /* via gpio7 (uart3 group) the PoE status can be read */
+ groups = "uart2", "uart3", "jtag", "wdt";
+ function = "gpio";
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "mikrotik,routerboard-m11g", "mediatek,mt7621-soc";
+ model = "MikroTik RouterBOARD M11G";
+
+ aliases {
+ led-boot = &led_usr;
+ led-failsafe = &led_usr;
+ led-running = &led_usr;
+ led-upgrade = &led_usr;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_usr: usr {
+ label = "routerboard-m11g:green:usr";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ rssi0 {
+ label = "routerboard-m11g:green:rssi0";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "routerboard-m11g:green:rssi1";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "routerboard-m11g:green:rssi2";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi3 {
+ label = "routerboard-m11g:green:rssi3";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi4 {
+ label = "routerboard-m11g:green:rssi4";
+ gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ res {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ pcie0_vcc_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie0_vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ w25q128@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ // XXX empiric value to obtain actual 10MHz SCK at the chip
+ spi-max-frequency = <3125000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RouterBoot";
+ reg = <0x0 0x40000>;
+ read-only;
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0xf000>;
+ read-only;
+ };
+
+ hard_config: partition@f000 {
+ label = "hard_config";
+ reg = <0xf000 0x1000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0xf000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "soft_config";
+ reg = <0x20000 0x1000>;
+ };
+
+ partition@30000 {
+ label = "bios";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
+ };
+
+ partition@40000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x040000 0xFC0000>;
+ };
+ };
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&hard_config 0x0010>;
+ mtd-mac-address-increment = <1>;
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart2", "wdt", "rgmii2";
+ function = "gpio";
+ };
+};
+
+&i2c {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
--- /dev/null
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ compatible = "mikrotik,routerboard-m33g", "mediatek,mt7621-soc";
+ model = "MikroTik RouterBOARD M33G";
+
+ aliases {
+ led-boot = &led_usr;
+ led-failsafe = &led_usr;
+ led-running = &led_usr;
+ led-upgrade = &led_usr;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_usr: usr {
+ label = "routerboard-m33g:green:usr";
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ res {
+ label = "res";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ pcie0_vcc_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie0_vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ pcie1_vcc_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie1_vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ pcie2_vcc_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie2_vcc";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ usb_vcc_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vcc";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ w25q40@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <3125000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RouterBoot";
+ reg = <0x0 0x40000>;
+ read-only;
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0xf000>;
+ read-only;
+ };
+
+ hard_config: partition@f000 {
+ label = "hard_config";
+ reg = <0xf000 0x1000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0xf000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "soft_config";
+ reg = <0x20000 0x1000>;
+ };
+
+ partition@30000 {
+ label = "bios";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
+ };
+ };
+ };
+
+ w25q128@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ // XXX empiric value to obtain actual 10MHz SCK at the chip
+ spi-max-frequency = <3125000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ // Region <0x0 0x40000> seems reserved by OEM
+
+ partition@40000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x040000 0xFC0000>;
+ };
+ };
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&hard_config 0x0010>;
+ mtd-mac-address-increment = <1>;
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&hard_config 0x0010>;
+ mtd-mac-address-increment = <2>;
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart2", "wdt";
+ function = "gpio";
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
check-size
endef
-define Device/mikrotik_rb750gr3
+define Device/mikrotik_routerboard-750gr3
$(Device/MikroTik)
- DEVICE_MODEL := RouterBOARD RB750G
- DEVICE_VARIANT := r3
+ DEVICE_MODEL := RouterBOARD 750Gr3
DEVICE_PACKAGES += kmod-gpio-beeper
+ SUPPORTED_DEVICES += mikrotik,rb750gr3
endef
-TARGET_DEVICES += mikrotik_rb750gr3
+TARGET_DEVICES += mikrotik_routerboard-750gr3
-define Device/mikrotik_rbm11g
+define Device/mikrotik_routerboard-m11g
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD M11G
+ SUPPORTED_DEVICES += mikrotik,rbm11g
endef
-TARGET_DEVICES += mikrotik_rbm11g
+TARGET_DEVICES += mikrotik_routerboard-m11g
-define Device/mikrotik_rbm33g
+define Device/mikrotik_routerboard-m33g
$(Device/MikroTik)
DEVICE_MODEL := RouterBOARD M33G
+ SUPPORTED_DEVICES += mikrotik,rbm33g
endef
-TARGET_DEVICES += mikrotik_rbm33g
+TARGET_DEVICES += mikrotik_routerboard-m33g
define Device/mqmaker_witi
IMAGE_SIZE := 16064k
ucidef_set_led_netdev "lan1" "lan1" "$boardname:green:lan1" "lan1"
ucidef_set_led_netdev "lan2" "lan2" "$boardname:green:lan2" "lan2"
;;
-mikrotik,rbm11g)
+mikrotik,routerboard-m11g)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
;;
asiarf,ap7621-nv1|\
lenovo,newifi-d1|\
- mikrotik,rbm33g|\
+ mikrotik,routerboard-m33g|\
xiaomi,mir3g|\
xiaomi,mir3g-v2)
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
linksys,re6500)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
;;
- mikrotik,rbm11g|\
+ mikrotik,routerboard-m11g|\
netgear,ex6150|\
thunder,timecloud|\
tplink,re350-v1|\
ubnt,unifi-nanohd)
ucidef_set_interface_lan "lan"
;;
- mikrotik,rb750gr3)
+ mikrotik,routerboard-750gr3)
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan"
;;
ubiquiti,edgerouterx|\
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
label_mac=$wan_mac
;;
- mikrotik,rb750gr3|\
- mikrotik,rbm11g|\
- mikrotik,rbm33g)
+ mikrotik,routerboard-750gr3|\
+ mikrotik,routerboard-m11g|\
+ mikrotik,routerboard-m33g)
label_mac=$(mtd_get_mac_binary hard_config 0x10)
;;
zbtlink,zbt-we1326|\
board=$(board_name)
case "$board" in
-mikrotik,rb750gr3)
+mikrotik,routerboard-750gr3)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17"
;;
telco-electronics,x1)
. /lib/functions/migrations.sh
board=$(board_name)
+boardonly="${board##*,}"
case "$board" in
+mikrotik,routerboard-750gr3)
+ migrate_leds "^rb750gr3:=$boardonly:"
+mikrotik,routerboard-m11g)
+ migrate_leds "^rbm11g:=$boardonly:"
+mikrotik,routerboard-m33g)
+ migrate_leds "^rbm33g:=$boardonly:"
netgear,wndr3700-v5)
- migrate_leds "^wndr3700v5:=wndr3700-v5:"
+ migrate_leds "^wndr3700v5:=$boardonly:"
;;
+
esac
migrations_apply system
fi
}
;;
- mikrotik,rb750gr3|\
- mikrotik,rbm11g|\
- mikrotik,rbm33g)
+ mikrotik,routerboard-750gr3|\
+ mikrotik,routerboard-m11g|\
+ mikrotik,routerboard-m33g)
[ -z "$(rootfs_type)" ] && mtd erase firmware
;;
asus,rt-ac65p|\
projects / openwrt / staging / adrian.git / commitdiff