ath79: ar934x: Update dts for current ag71xx driver

Enable mdio1 by default because mdio1 is needed when eth1 is enabled.

PS: If a ar9341 device has only one port and you only want to use gmac0,
change compatible of gmac1 to "syscon", "simple-mfd" in dts.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

diff --git a/target/linux/ath79/dts/ar9341.dtsi b/target/linux/ath79/dts/ar9341.dtsi
index 751db2a1e80cd998e1d8c3be20463f00b100a4cd..a7c5ac6262f08330a71188774f45feebc164b0b9 100644 (file)
--- a/target/linux/ath79/dts/ar9341.dtsi
+++ b/target/linux/ath79/dts/ar9341.dtsi
@@ -16,3 +16,11 @@
        interrupt-parent = <&cpuintc>;
        interrupts = <2>;
 };
+
+&eth0 {
+       phy-mode = "mii";
+};
+
+&eth1 {
+       status = "okay";
+};

diff --git a/target/linux/ath79/dts/ar934x.dtsi b/target/linux/ath79/dts/ar934x.dtsi
index 75865a718a8c61bd1b015324741f9fb9e9a9ff43..a93739ceed87a33019adf715b1ae05c43f316a83 100644 (file)
--- a/target/linux/ath79/dts/ar934x.dtsi
+++ b/target/linux/ath79/dts/ar934x.dtsi
@@ -191,12 +191,13 @@
 };
 
 &mdio0 {
+       compatible = "qca,ar9340-mdio";
        resets = <&rst 22>;
        reset-names = "mdio";
 };
 
 &eth0 {
-       compatible = "qca,ar9340-eth", "syscon";
+       compatible = "qca,ar9340-eth", "syscon", "simple-mfd";
 
        pll-data = <0x16000000 0x00000101 0x00001616>;
        pll-reg = <0x4 0x2c 17>;
@@ -207,13 +208,38 @@
 };
 
 &mdio1 {
+       status = "okay";
+
+       compatible = "qca,ar9340-mdio";
        resets = <&rst 23>;
        reset-names = "mdio";
        builtin-switch;
+
+       builtin_switch: switch0@1f {
+               compatible = "qca,ar8229-builtin";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg = <0x1f>;
+               phy-mode = "gmii";
+               phy4-mii-enable;
+
+               mdio-bus {
+                       swphy0: ethernet-phy@0 {
+                               reg = <0>;
+                               phy-mode = "mii";
+                       };
+
+                       swphy4: ethernet-phy@4 {
+                               reg = <4>;
+                               phy-mode = "mii";
+                       };
+               };
+       };
 };
 
 &eth1 {
-       compatible = "qca,ar9340-eth", "syscon";
+       compatible = "qca,ar9340-eth", "syscon", "simple-mfd";
 
        resets = <&rst 13>;
        reset-names = "mac";

diff --git a/target/linux/ath79/dts/ath79.dtsi b/target/linux/ath79/dts/ath79.dtsi
index cec4d0b6b0d95e6450754a52771d3af52a51796d..a57c58659f1e14d54e47e6187e7011bd2eb9c183 100644 (file)
--- a/target/linux/ath79/dts/ath79.dtsi
+++ b/target/linux/ath79/dts/ath79.dtsi
@@ -43,7 +43,7 @@
                eth0: eth@19000000 {
                        status = "disabled";
 
-                       compatible = "qca,ath79-eth", "syscon";
+                       compatible = "qca,ath79-eth", "syscon", "simple-mfd";
                        reg = <0x19000000 0x200>;
 
                        interrupts = <4>;
@@ -51,6 +51,8 @@
 
                        mdio0: mdio-bus {
                                status = "disabled";
+
+                               compatible = "qca,ath79-mdio";
                                #address-cells = <1>;
                                #size-cells = <0>;
 
@@ -64,7 +66,7 @@
                eth1: eth@1a000000 {
                        status = "disabled";
 
-                       compatible = "qca,ath79-eth", "syscon";
+                       compatible = "qca,ath79-eth", "syscon", "simple-mfd";
                        reg = <0x1a000000 0x200>;
 
                        interrupts = <5>;
@@ -72,6 +74,8 @@
 
                        mdio1: mdio-bus {
                                status = "disabled";
+
+                               compatible = "qca,ath79-mdio";
                                #address-cells = <1>;
                                #size-cells = <0>;