brcm63xx: add VW6339GU support

Completely untested except for booting from network; wan port
only works in 10/HD, lan1 only in 100/FD.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39678

diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 6233531ffd1c50eb6843390d1622ffd6110c7ce8..93e2cb70f05185d5e2cd80b4bbab347ccc6902cb 100755 (executable)
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -102,6 +102,13 @@ NB6)
        ucidef_add_switch_vlan "switch0" "2" "0 9t"
        ;;
 
+VW6339GU)
+       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+       ucidef_add_switch "switch0" "1" "1"
+       ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
+       ucidef_add_switch_vlan "switch0" "2" "4 8t"
+       ;;
+
 *)
        ucidef_set_interfaces_lan_wan "eth1" "eth0"
        ;;

diff --git a/target/linux/brcm63xx/patches-3.10/559-board_vw6339gu.patch b/target/linux/brcm63xx/patches-3.10/559-board_vw6339gu.patch
new file mode 100644 (file)
index 0000000..08e4046
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/559-board_vw6339gu.patch
@@ -0,0 +1,119 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4538,6 +4538,108 @@ static struct board_info __initdata boar
+               },
+       },
+ };
++
++static struct board_info __initdata board_vw6339gu = {
++      .name                           = "VW6339GU",
++      .expected_cpu_id                = 0x63268,
++
++      .has_uart0                      = 1,
++
++      .has_ehci0                      = 1,
++      .has_ohci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .has_enetsw                     = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN2",
++                      },
++
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN4",
++                      },
++
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++
++                      [4] = {
++                              .used   = 1,
++                              .phy_id = 7,
++                              .name   = "WAN",
++                      },
++              },
++      },
++
++      .leds = {
++              {
++                      .name           = "VW6339GU:green:power",
++                      .gpio           = 1,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:red:power",
++                      .gpio           = 0,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:green:internet",
++                      .gpio           = 8,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:red:internet",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:green:dsl",
++                      .gpio           = 3,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:green:wps",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "VW6339GU:green:usb",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 32,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ 
+ /*
+@@ -4628,6 +4730,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+       &board_963269bhr,
++      &board_vw6339gu,
+ #endif
+ };
+ 

diff --git a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
index 178bad706ad9c58fcc43422c97aa556b0239775a..9e7c9bbbffbc813fa393ec0d143b006818d83d95 100644 (file)
--- a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -4636,7 +4637,7 @@ static const struct board_info __initcon
+@@ -4739,7 +4740,7 @@ static const struct board_info __initcon
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
        .revision               = 0x02,
        .board_rev              = 0x17,
        .country_code           = 0x0,
-@@ -4656,6 +4657,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -4759,6 +4760,7 @@ static struct ssb_sprom bcm63xx_sprom =
        .boardflags_lo          = 0x2848,
        .boardflags_hi          = 0x0000,
  };