--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH 1/4] net: phy: update Broadcom drivers to v4.5
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/drivers/net/phy/bcm7xxx.c
++++ b/drivers/net/phy/bcm7xxx.c
+@@ -250,10 +250,6 @@ static int bcm7xxx_config_init(struct ph
+ phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
+ phy_read(phydev, MII_BCM7XXX_AUX_MODE);
+
+- /* Workaround only required for 100Mbits/sec capable PHYs */
+- if (phydev->supported & PHY_GBIT_FEATURES)
+- return 0;
+-
+ /* set shadow mode 2 */
+ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
+ MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2);
+@@ -270,7 +266,7 @@ static int bcm7xxx_config_init(struct ph
+ phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555);
+
+ /* reset shadow mode 2 */
+- ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0);
++ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2);
+ if (ret < 0)
+ return ret;
+
+@@ -307,11 +303,6 @@ static int bcm7xxx_suspend(struct phy_de
+ return 0;
+ }
+
+-static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
+-{
+- return 0;
+-}
+-
+ #define BCM7XXX_28NM_GPHY(_oui, _name) \
+ { \
+ .phy_id = (_oui), \
+@@ -338,7 +329,7 @@ static struct phy_driver bcm7xxx_driver[
+ .phy_id = PHY_ID_BCM7425,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7425",
+- .features = PHY_GBIT_FEATURES |
++ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+@@ -351,7 +342,7 @@ static struct phy_driver bcm7xxx_driver[
+ .phy_id = PHY_ID_BCM7429,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM7429",
+- .features = PHY_GBIT_FEATURES |
++ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+ .flags = PHY_IS_INTERNAL,
+ .config_init = bcm7xxx_config_init,
+@@ -361,31 +352,18 @@ static struct phy_driver bcm7xxx_driver[
+ .resume = bcm7xxx_config_init,
+ .driver = { .owner = THIS_MODULE },
+ }, {
+- .phy_id = PHY_BCM_OUI_4,
+- .phy_id_mask = 0xffff0000,
+- .name = "Broadcom BCM7XXX 40nm",
+- .features = PHY_GBIT_FEATURES |
+- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+- .flags = PHY_IS_INTERNAL,
+- .config_init = bcm7xxx_config_init,
+- .config_aneg = genphy_config_aneg,
+- .read_status = genphy_read_status,
+- .suspend = bcm7xxx_suspend,
+- .resume = bcm7xxx_config_init,
+- .driver = { .owner = THIS_MODULE },
+-}, {
+- .phy_id = PHY_BCM_OUI_5,
+- .phy_id_mask = 0xffffff00,
+- .name = "Broadcom BCM7XXX 65nm",
+- .features = PHY_BASIC_FEATURES |
++ .phy_id = PHY_ID_BCM7435,
++ .phy_id_mask = 0xfffffff0,
++ .name = "Broadcom BCM7435",
++ .features = PHY_BASIC_FEATURES |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+- .flags = PHY_IS_INTERNAL,
+- .config_init = bcm7xxx_dummy_config_init,
+- .config_aneg = genphy_config_aneg,
+- .read_status = genphy_read_status,
+- .suspend = bcm7xxx_suspend,
+- .resume = bcm7xxx_config_init,
+- .driver = { .owner = THIS_MODULE },
++ .flags = PHY_IS_INTERNAL,
++ .config_init = bcm7xxx_config_init,
++ .config_aneg = genphy_config_aneg,
++ .read_status = genphy_read_status,
++ .suspend = bcm7xxx_suspend,
++ .resume = bcm7xxx_config_init,
++ .driver = { .owner = THIS_MODULE },
+ } };
+
+ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+@@ -395,9 +373,8 @@ static struct mdio_device_id __maybe_unu
+ { PHY_ID_BCM7425, 0xfffffff0, },
+ { PHY_ID_BCM7429, 0xfffffff0, },
+ { PHY_ID_BCM7439, 0xfffffff0, },
++ { PHY_ID_BCM7435, 0xfffffff0, },
+ { PHY_ID_BCM7445, 0xfffffff0, },
+- { PHY_BCM_OUI_4, 0xffff0000 },
+- { PHY_BCM_OUI_5, 0xffffff00 },
+ { }
+ };
+
+--- a/include/linux/brcmphy.h
++++ b/include/linux/brcmphy.h
+@@ -26,6 +26,7 @@
+ #define PHY_ID_BCM7366 0x600d8490
+ #define PHY_ID_BCM7425 0x600d86b0
+ #define PHY_ID_BCM7429 0x600d8730
++#define PHY_ID_BCM7435 0x600d8750
+ #define PHY_ID_BCM7439 0x600d8480
+ #define PHY_ID_BCM7439_2 0xae025080
+ #define PHY_ID_BCM7445 0x600d8510
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH 2/4] net: phy: update Broadcom drivers to v4.6
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/drivers/net/phy/bcm7xxx.c
++++ b/drivers/net/phy/bcm7xxx.c
+@@ -24,7 +24,7 @@
+ #define MII_BCM7XXX_100TX_FALSE_CAR 0x13
+ #define MII_BCM7XXX_100TX_DISC 0x14
+ #define MII_BCM7XXX_AUX_MODE 0x1d
+-#define MII_BCM7XX_64CLK_MDIO BIT(12)
++#define MII_BCM7XXX_64CLK_MDIO BIT(12)
+ #define MII_BCM7XXX_TEST 0x1f
+ #define MII_BCM7XXX_SHD_MODE_2 BIT(2)
+
+@@ -247,7 +247,7 @@ static int bcm7xxx_config_init(struct ph
+ int ret;
+
+ /* Enable 64 clock MDIO */
+- phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
++ phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO);
+ phy_read(phydev, MII_BCM7XXX_AUX_MODE);
+
+ /* set shadow mode 2 */
+@@ -318,6 +318,22 @@ static int bcm7xxx_suspend(struct phy_de
+ .driver = { .owner = THIS_MODULE }, \
+ }
+
++#define BCM7XXX_40NM_EPHY(_oui, _name) \
++{ \
++ .phy_id = (_oui), \
++ .phy_id_mask = 0xfffffff0, \
++ .name = _name, \
++ .features = PHY_BASIC_FEATURES | \
++ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \
++ .flags = PHY_IS_INTERNAL, \
++ .config_init = bcm7xxx_config_init, \
++ .config_aneg = genphy_config_aneg, \
++ .read_status = genphy_read_status, \
++ .suspend = bcm7xxx_suspend, \
++ .resume = bcm7xxx_config_init, \
++ .driver = { .owner = THIS_MODULE }, \
++}
++
+ static struct phy_driver bcm7xxx_driver[] = {
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
+@@ -325,51 +341,19 @@ static struct phy_driver bcm7xxx_driver[
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
+-{
+- .phy_id = PHY_ID_BCM7425,
+- .phy_id_mask = 0xfffffff0,
+- .name = "Broadcom BCM7425",
+- .features = PHY_BASIC_FEATURES |
+- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+- .flags = PHY_IS_INTERNAL,
+- .config_init = bcm7xxx_config_init,
+- .config_aneg = genphy_config_aneg,
+- .read_status = genphy_read_status,
+- .suspend = bcm7xxx_suspend,
+- .resume = bcm7xxx_config_init,
+- .driver = { .owner = THIS_MODULE },
+-}, {
+- .phy_id = PHY_ID_BCM7429,
+- .phy_id_mask = 0xfffffff0,
+- .name = "Broadcom BCM7429",
+- .features = PHY_BASIC_FEATURES |
+- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+- .flags = PHY_IS_INTERNAL,
+- .config_init = bcm7xxx_config_init,
+- .config_aneg = genphy_config_aneg,
+- .read_status = genphy_read_status,
+- .suspend = bcm7xxx_suspend,
+- .resume = bcm7xxx_config_init,
+- .driver = { .owner = THIS_MODULE },
+-}, {
+- .phy_id = PHY_ID_BCM7435,
+- .phy_id_mask = 0xfffffff0,
+- .name = "Broadcom BCM7435",
+- .features = PHY_BASIC_FEATURES |
+- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+- .flags = PHY_IS_INTERNAL,
+- .config_init = bcm7xxx_config_init,
+- .config_aneg = genphy_config_aneg,
+- .read_status = genphy_read_status,
+- .suspend = bcm7xxx_suspend,
+- .resume = bcm7xxx_config_init,
+- .driver = { .owner = THIS_MODULE },
+-} };
++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"),
++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"),
++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),
++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"),
++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"),
++};
+
+ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7250, 0xfffffff0, },
+ { PHY_ID_BCM7364, 0xfffffff0, },
+ { PHY_ID_BCM7366, 0xfffffff0, },
++ { PHY_ID_BCM7346, 0xfffffff0, },
++ { PHY_ID_BCM7362, 0xfffffff0, },
+ { PHY_ID_BCM7425, 0xfffffff0, },
+ { PHY_ID_BCM7429, 0xfffffff0, },
+ { PHY_ID_BCM7439, 0xfffffff0, },
+--- a/include/linux/brcmphy.h
++++ b/include/linux/brcmphy.h
+@@ -24,6 +24,8 @@
+ #define PHY_ID_BCM7250 0xae025280
+ #define PHY_ID_BCM7364 0xae025260
+ #define PHY_ID_BCM7366 0x600d8490
++#define PHY_ID_BCM7346 0x600d8650
++#define PHY_ID_BCM7362 0x600d84b0
+ #define PHY_ID_BCM7425 0x600d86b0
+ #define PHY_ID_BCM7429 0x600d8730
+ #define PHY_ID_BCM7435 0x600d8750
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH 1/2] net: phy: cherry-pick Broadcom drivers updates from
+ v4.10-rc1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This includes following upstream commits:
+5519da874ad0 net: phy: broadcom: Move bcm54xx_auxctl_{read, write} to common library
+b14995ac2527 net: phy: broadcom: Add BCM54810 PHY entry
+5b4e29005123 net: phy: broadcom: add bcm54xx_auxctl_read
+d92ead16be40 net: phy: broadcom: Add support for BCM54612E
+3cf25904fe46 net: phy: broadcom: Update Auxiliary Control Register macros
+
+Other commits were skipped as they depend on other changes like
+ETHTOOL_PHY_DOWNSHIFT & DOWNSHIFT_DEV_DISABLE and new APIs like
+get_sset_count.
+
+One exception was picking new regs from commit d06f78c4232d ("net: phy:
+broadcom: Add support code for downshift/Wirespeed").
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -77,7 +77,7 @@ config BROADCOM_PHY
+ select BCM_NET_PHYLIB
+ ---help---
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+- BCM5481 and BCM5482 PHYs.
++ BCM5481, BCM54810 and BCM5482 PHYs.
+
+ config BCM_CYGNUS_PHY
+ tristate "Drivers for Broadcom Cygnus SoC internal PHY"
+--- a/drivers/net/phy/bcm-phy-lib.c
++++ b/drivers/net/phy/bcm-phy-lib.c
+@@ -50,6 +50,23 @@ int bcm_phy_read_exp(struct phy_device *
+ }
+ EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
+
++int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum)
++{
++ /* The register must be written to both the Shadow Register Select and
++ * the Shadow Read Register Selector
++ */
++ phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum |
++ regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT);
++ return phy_read(phydev, MII_BCM54XX_AUX_CTL);
++}
++EXPORT_SYMBOL_GPL(bcm54xx_auxctl_read);
++
++int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
++{
++ return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
++}
++EXPORT_SYMBOL(bcm54xx_auxctl_write);
++
+ int bcm_phy_write_misc(struct phy_device *phydev,
+ u16 reg, u16 chl, u16 val)
+ {
+--- a/drivers/net/phy/bcm-phy-lib.h
++++ b/drivers/net/phy/bcm-phy-lib.h
+@@ -19,6 +19,9 @@
+ int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
+ int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+
++int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val);
++int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum);
++
+ int bcm_phy_write_misc(struct phy_device *phydev,
+ u16 reg, u16 chl, u16 value);
+ int bcm_phy_read_misc(struct phy_device *phydev,
+--- a/drivers/net/phy/broadcom.c
++++ b/drivers/net/phy/broadcom.c
+@@ -18,7 +18,7 @@
+ #include <linux/module.h>
+ #include <linux/phy.h>
+ #include <linux/brcmphy.h>
+-
++#include <linux/of.h>
+
+ #define BRCM_PHY_MODEL(phydev) \
+ ((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
+@@ -30,9 +30,32 @@ MODULE_DESCRIPTION("Broadcom PHY driver"
+ MODULE_AUTHOR("Maciej W. Rozycki");
+ MODULE_LICENSE("GPL");
+
+-static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
++static int bcm54810_config(struct phy_device *phydev)
+ {
+- return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
++ int rc, val;
++
++ val = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
++ val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
++ rc = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
++ val);
++ if (rc < 0)
++ return rc;
++
++ val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
++ val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
++ val |= MII_BCM54XX_AUXCTL_MISC_WREN;
++ rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
++ val);
++ if (rc < 0)
++ return rc;
++
++ val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
++ val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
++ rc = bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
++ if (rc < 0)
++ return rc;
++
++ return 0;
+ }
+
+ /* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
+@@ -207,6 +230,12 @@ static int bcm54xx_config_init(struct ph
+ (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+ bcm54xx_adjust_rxrefclk(phydev);
+
++ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
++ err = bcm54810_config(phydev);
++ if (err)
++ return err;
++ }
++
+ bcm54xx_phydsp_config(phydev);
+
+ return 0;
+@@ -304,6 +333,7 @@ static int bcm5482_read_status(struct ph
+
+ static int bcm5481_config_aneg(struct phy_device *phydev)
+ {
++ struct device_node *np = phydev->dev.of_node;
+ int ret;
+
+ /* Aneg firsly. */
+@@ -334,6 +364,49 @@ static int bcm5481_config_aneg(struct ph
+ phy_write(phydev, 0x18, reg);
+ }
+
++ if (of_property_read_bool(np, "enet-phy-lane-swap")) {
++ /* Lane Swap - Undocumented register...magic! */
++ ret = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_SEL_ER + 0x9,
++ 0x11B);
++ if (ret < 0)
++ return ret;
++ }
++
++ return ret;
++}
++
++static int bcm54612e_config_aneg(struct phy_device *phydev)
++{
++ int ret;
++
++ /* First, auto-negotiate. */
++ ret = genphy_config_aneg(phydev);
++
++ /* Clear TX internal delay unless requested. */
++ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
++ (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) {
++ /* Disable TXD to GTXCLK clock delay (default set) */
++ /* Bit 9 is the only field in shadow register 00011 */
++ bcm_phy_write_shadow(phydev, 0x03, 0);
++ }
++
++ /* Clear RX internal delay unless requested. */
++ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) &&
++ (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
++ u16 reg;
++
++ /* Errata: reads require filling in the write selector field */
++ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
++ MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
++ reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
++ /* Disable RXD to RXC delay (default set) */
++ reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
++ /* Clear shadow selector field */
++ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
++ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
++ MII_BCM54XX_AUXCTL_MISC_WREN | reg);
++ }
++
+ return ret;
+ }
+
+@@ -488,6 +561,18 @@ static struct phy_driver broadcom_driver
+ .config_intr = bcm_phy_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ }, {
++ .phy_id = PHY_ID_BCM54612E,
++ .phy_id_mask = 0xfffffff0,
++ .name = "Broadcom BCM54612E",
++ .features = PHY_GBIT_FEATURES |
++ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
++ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
++ .config_init = bcm54xx_config_init,
++ .config_aneg = bcm54612e_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = bcm_phy_ack_intr,
++ .config_intr = bcm_phy_config_intr,
++}, {
+ .phy_id = PHY_ID_BCM54616S,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM54616S",
+@@ -527,6 +612,18 @@ static struct phy_driver broadcom_driver
+ .config_intr = bcm_phy_config_intr,
+ .driver = { .owner = THIS_MODULE },
+ }, {
++ .phy_id = PHY_ID_BCM54810,
++ .phy_id_mask = 0xfffffff0,
++ .name = "Broadcom BCM54810",
++ .features = PHY_GBIT_FEATURES |
++ SUPPORTED_Pause | SUPPORTED_Asym_Pause,
++ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
++ .config_init = bcm54xx_config_init,
++ .config_aneg = bcm5481_config_aneg,
++ .read_status = genphy_read_status,
++ .ack_interrupt = bcm_phy_ack_intr,
++ .config_intr = bcm_phy_config_intr,
++}, {
+ .phy_id = PHY_ID_BCM5482,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Broadcom BCM5482",
+@@ -612,9 +709,11 @@ static struct mdio_device_id __maybe_unu
+ { PHY_ID_BCM5411, 0xfffffff0 },
+ { PHY_ID_BCM5421, 0xfffffff0 },
+ { PHY_ID_BCM5461, 0xfffffff0 },
++ { PHY_ID_BCM54612E, 0xfffffff0 },
+ { PHY_ID_BCM54616S, 0xfffffff0 },
+ { PHY_ID_BCM5464, 0xfffffff0 },
+ { PHY_ID_BCM5481, 0xfffffff0 },
++ { PHY_ID_BCM54810, 0xfffffff0 },
+ { PHY_ID_BCM5482, 0xfffffff0 },
+ { PHY_ID_BCM50610, 0xfffffff0 },
+ { PHY_ID_BCM50610M, 0xfffffff0 },
+--- a/include/linux/brcmphy.h
++++ b/include/linux/brcmphy.h
+@@ -13,11 +13,13 @@
+ #define PHY_ID_BCM5241 0x0143bc30
+ #define PHY_ID_BCMAC131 0x0143bc70
+ #define PHY_ID_BCM5481 0x0143bca0
++#define PHY_ID_BCM54810 0x03625d00
+ #define PHY_ID_BCM5482 0x0143bcb0
+ #define PHY_ID_BCM5411 0x00206070
+ #define PHY_ID_BCM5421 0x002060e0
+ #define PHY_ID_BCM5464 0x002060b0
+ #define PHY_ID_BCM5461 0x002060c0
++#define PHY_ID_BCM54612E 0x03625e60
+ #define PHY_ID_BCM54616S 0x03625d10
+ #define PHY_ID_BCM57780 0x03625d90
+
+@@ -55,6 +57,7 @@
+ #define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000
+ #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000
+ #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000
++
+ /* Broadcom BCM7xxx specific workarounds */
+ #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff)
+ #define PHY_BRCM_7XXX_PATCH(x) ((x) & 0xff)
+@@ -105,11 +108,14 @@
+ #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800
+
+ #define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
++#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100
+ #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
+ #define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000
+ #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007
++#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12
++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8)
+
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
++#define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007
+
+ /*
+ * Broadcom LED source encodings. These are used in BCM5461, BCM5481,
+@@ -124,6 +130,7 @@
+ #define BCM_LED_SRC_INTR 0x6
+ #define BCM_LED_SRC_QUALITY 0x7
+ #define BCM_LED_SRC_RCVLED 0x8
++#define BCM_LED_SRC_WIRESPEED 0x9
+ #define BCM_LED_SRC_MULTICOLOR1 0xa
+ #define BCM_LED_SRC_OPENSHORT 0xb
+ #define BCM_LED_SRC_OFF 0xe /* Tied high */
+@@ -135,6 +142,14 @@
+ * Shadow values go into bits [14:10] of register 0x1c to select a shadow
+ * register to access.
+ */
++
++/* 00100: Reserved control register 2 */
++#define BCM54XX_SHD_SCR2 0x04
++#define BCM54XX_SHD_SCR2_WSPD_RTRY_DIS 0x100
++#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT 2
++#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET 2
++#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK 0x7
++
+ /* 00101: Spare Control Register 3 */
+ #define BCM54XX_SHD_SCR3 0x05
+ #define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
+@@ -189,6 +204,12 @@
+ #define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */
+ #define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */
+
++/* BCM54810 Registers */
++#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL (MII_BCM54XX_EXP_SEL_ER + 0x90)
++#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0)
++#define BCM54810_SHD_CLK_CTL 0x3
++#define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9)
++
+
+ /*****************************************************************************/
+ /* Fast Ethernet Transceiver definitions. */
--- /dev/null
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH 2/2] net: phy: pick Broadcom drivers updates from net-next for
+ 4.11
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/drivers/net/phy/bcm7xxx.c
++++ b/drivers/net/phy/bcm7xxx.c
+@@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf
+ return 0;
+ }
+
++static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev)
++{
++ /* +1 RC_CAL codes for RL centering for both LT and HT conditions */
++ bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003);
++
++ /* Cut master bias current by 2% to compensate for RC_CAL offset */
++ bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b);
++
++ /* Improve hybrid leakage */
++ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3);
++
++ /* Change rx_on_tune 8 to 0xf */
++ bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6);
++
++ /* Change 100Tx EEE bandwidth */
++ bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d);
++
++ /* Enable ffe zero detection for Vitesse interoperability */
++ bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015);
++
++ r_rc_cal_reset(phydev);
++
++ return 0;
++}
++
+ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
+ {
+ u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
+ u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
+ int ret = 0;
+
++ /* Newer devices have moved the revision information back into a
++ * standard location in MII_PHYS_ID[23]
++ */
++ if (rev == 0)
++ rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
++
+ pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
+ dev_name(&phydev->dev), phydev->drv->name, rev, patch);
+
+@@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru
+ case 0x10:
+ ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
+ break;
++ case 0x01:
++ ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev);
++ break;
+ default:
+ break;
+ }
+@@ -336,6 +370,7 @@ static int bcm7xxx_suspend(struct phy_de
+
+ static struct phy_driver bcm7xxx_driver[] = {
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
++ BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
+@@ -350,6 +385,7 @@ static struct phy_driver bcm7xxx_driver[
+
+ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
+ { PHY_ID_BCM7250, 0xfffffff0, },
++ { PHY_ID_BCM7278, 0xfffffff0, },
+ { PHY_ID_BCM7364, 0xfffffff0, },
+ { PHY_ID_BCM7366, 0xfffffff0, },
+ { PHY_ID_BCM7346, 0xfffffff0, },
+--- a/drivers/net/phy/broadcom.c
++++ b/drivers/net/phy/broadcom.c
+@@ -395,12 +395,10 @@ static int bcm54612e_config_aneg(struct
+ (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) {
+ u16 reg;
+
+- /* Errata: reads require filling in the write selector field */
+- bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+- MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC);
+- reg = phy_read(phydev, MII_BCM54XX_AUX_CTL);
++ reg = bcm54xx_auxctl_read(phydev,
++ MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+ /* Disable RXD to RXC delay (default set) */
+- reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW;
++ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+ /* Clear shadow selector field */
+ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK;
+ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
+--- a/include/linux/brcmphy.h
++++ b/include/linux/brcmphy.h
+@@ -24,6 +24,7 @@
+ #define PHY_ID_BCM57780 0x03625d90
+
+ #define PHY_ID_BCM7250 0xae025280
++#define PHY_ID_BCM7278 0xae0251a0
+ #define PHY_ID_BCM7364 0xae025260
+ #define PHY_ID_BCM7366 0x600d8490
+ #define PHY_ID_BCM7346 0x600d8650
+@@ -103,18 +104,17 @@
+ /*
+ * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18)
+ */
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000
++#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00
+ #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400
+ #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800
+
+-#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
+-#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100
+-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
+-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12
+-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8)
++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07
++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010
++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100
++#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200
++#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000
+
++#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12
+ #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007
+
+ /*
projects / openwrt / staging / noltari.git / commitdiff