--- /dev/null
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_AIROHA=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_PSCI=y
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_SMMU is not set
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_PM=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_EN7523=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MISC=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_REMAP=y
+CONFIG_DTC=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_EN7523=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_SMP=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_FIXED=0
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGRATION=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NLS=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=2
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_MEDIATEK=y
+CONFIG_PCIE_PME=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_PWM=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_AIROHA_EN7523=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SRCU=y
+CONFIG_STACKTRACE=y
+# CONFIG_SWAP is not set
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_XHCI_HCD=y
+# CONFIG_USB_XHCI_PLATFORM is not set
+CONFIG_USE_OF=y
+# CONFIG_VFP is not set
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
--- /dev/null
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -572,6 +572,18 @@ config ARCH_VIRT
+ select HAVE_ARM_ARCH_TIMER
+ select ARCH_SUPPORTS_BIG_ENDIAN
+
++config ARCH_AIROHA
++ bool "Airoha SoC Support"
++ depends on ARCH_MULTI_V7
++ select ARM_AMBA
++ select ARM_GIC
++ select ARM_GIC_V3
++ select ARM_PSCI
++ select HAVE_ARM_ARCH_TIMER
++ select COMMON_CLK
++ help
++ Support for Airoha EN7523 SoCs
++
+ #
+ # This is sorted alphabetically by mach-* pathname. However, plat-*
+ # Kconfigs may be included either alphabetically (according to the
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -156,6 +156,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x003080
+ # Machine directory name. This list is sorted alphanumerically
+ # by CONFIG_* macro name.
+ machine-$(CONFIG_ARCH_ACTIONS) += actions
++machine-$(CONFIG_ARCH_AIROHA) += airoha
+ machine-$(CONFIG_ARCH_ALPINE) += alpine
+ machine-$(CONFIG_ARCH_ARTPEC) += artpec
+ machine-$(CONFIG_ARCH_ASPEED) += aspeed
--- /dev/null
+--- a/drivers/clk/Kconfig
++++ b/drivers/clk/Kconfig
+@@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
+ help
+ If you say yes here you get support for the CS2000 clock multiplier.
+
++config COMMON_CLK_EN7523
++ bool "Clock driver for Airoha EN7523 SoC system clocks"
++ depends on OF
++ depends on ARCH_AIROHA || COMPILE_TEST
++ default ARCH_AIROHA
++ help
++ This driver provides the fixed clocks and gates present on Airoha
++ ARM silicon.
++
+ config COMMON_CLK_FSL_FLEXSPI
+ tristate "Clock driver for FlexSPI on Layerscape SoCs"
+ depends on ARCH_LAYERSCAPE || COMPILE_TEST
+--- a/drivers/clk/Makefile
++++ b/drivers/clk/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-
+ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
+ obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
+ obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o
++obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o
+ obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
+ obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o
+ obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
--- /dev/null
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -247,6 +247,16 @@ config GPIO_EM
+ help
+ Say yes here to support GPIO on Renesas Emma Mobile SoCs.
+
++config GPIO_EN7523
++ tristate "Airoha GPIO support"
++ depends on ARCH_AIROHA
++ default ARCH_AIROHA
++ select GPIO_GENERIC
++ select GPIOLIB_IRQCHIP
++ help
++ Say Y or M here to support the GPIO controller block on the
++ Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
++
+ config GPIO_EP93XX
+ def_bool y
+ depends on ARCH_EP93XX
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -57,6 +57,7 @@ obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
+ obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
+ obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o
+ obj-$(CONFIG_GPIO_EM) += gpio-em.o
++obj-$(CONFIG_GPIO_EN7523) += gpio-en7523.o
+ obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
+ obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o
+ obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
--- /dev/null
+From 48342ae751c797ac73ac9c894b3f312df18ffd21 Mon Sep 17 00:00:00 2001
+From: Geert Uytterhoeven <geert+renesas@glider.be>
+Date: Wed, 15 Sep 2021 13:46:20 +0100
+Subject: [PATCH] ARM: 9124/1: uncompress: Parse "linux,usable-memory-range" DT
+ property
+
+Add support for parsing the "linux,usable-memory-range" DT property.
+This property is used to describe the usable memory reserved for the
+crash dump kernel, and thus makes the memory reservation explicit.
+If present, Linux no longer needs to mask the program counter, and rely
+on the "mem=" kernel parameter to obtain the start and size of usable
+memory.
+
+For backwards compatibility, the traditional method to derive the start
+of memory is still used if "linux,usable-memory-range" is absent.
+
+Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
+Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
+---
+ .../arm/boot/compressed/fdt_check_mem_start.c | 48 ++++++++++++++++---
+ 1 file changed, 42 insertions(+), 6 deletions(-)
+
+--- a/arch/arm/boot/compressed/fdt_check_mem_start.c
++++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
+@@ -55,16 +55,17 @@ static uint64_t get_val(const fdt32_t *c
+ * DTB, and, if out-of-range, replace it by the real start address.
+ * To preserve backwards compatibility (systems reserving a block of memory
+ * at the start of physical memory, kdump, ...), the traditional method is
+- * always used if it yields a valid address.
++ * used if it yields a valid address, unless the "linux,usable-memory-range"
++ * property is present.
+ *
+ * Return value: start address of physical memory to use
+ */
+ uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+ {
+- uint32_t addr_cells, size_cells, base;
++ uint32_t addr_cells, size_cells, usable_base, base;
+ uint32_t fdt_mem_start = 0xffffffff;
+- const fdt32_t *reg, *endp;
+- uint64_t size, end;
++ const fdt32_t *usable, *reg, *endp;
++ uint64_t size, usable_end, end;
+ const char *type;
+ int offset, len;
+
+@@ -80,6 +81,27 @@ uint32_t fdt_check_mem_start(uint32_t me
+ if (addr_cells > 2 || size_cells > 2)
+ return mem_start;
+
++ /*
++ * Usable memory in case of a crash dump kernel
++ * This property describes a limitation: memory within this range is
++ * only valid when also described through another mechanism
++ */
++ usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
++ (addr_cells + size_cells) * sizeof(fdt32_t));
++ if (usable) {
++ size = get_val(usable + addr_cells, size_cells);
++ if (!size)
++ return mem_start;
++
++ if (addr_cells > 1 && fdt32_ld(usable)) {
++ /* Outside 32-bit address space */
++ return mem_start;
++ }
++
++ usable_base = fdt32_ld(usable + addr_cells - 1);
++ usable_end = usable_base + size;
++ }
++
+ /* Walk all memory nodes and regions */
+ for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+@@ -107,7 +129,20 @@ uint32_t fdt_check_mem_start(uint32_t me
+
+ base = fdt32_ld(reg + addr_cells - 1);
+ end = base + size;
+- if (mem_start >= base && mem_start < end) {
++ if (usable) {
++ /*
++ * Clip to usable range, which takes precedence
++ * over mem_start
++ */
++ if (base < usable_base)
++ base = usable_base;
++
++ if (end > usable_end)
++ end = usable_end;
++
++ if (end <= base)
++ continue;
++ } else if (mem_start >= base && mem_start < end) {
+ /* Calculated address is valid, use it */
+ return mem_start;
+ }
+@@ -123,7 +158,8 @@ uint32_t fdt_check_mem_start(uint32_t me
+ }
+
+ /*
+- * The calculated address is not usable.
++ * The calculated address is not usable, or was overridden by the
++ * "linux,usable-memory-range" property.
+ * Use the lowest usable physical memory address from the DTB instead,
+ * and make sure this is a multiple of 2 MiB for phys/virt patching.
+ */
--- /dev/null
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -307,6 +307,12 @@ config SPI_DLN2
+ This driver can also be built as a module. If so, the module
+ will be called spi-dln2.
+
++config SPI_AIROHA_EN7523
++ bool "Airoha EN7523 SPI controller support"
++ depends on ARCH_AIROHA
++ help
++ This enables SPI controller support for the Airoha EN7523 SoC.
++
+ config SPI_EP93XX
+ tristate "Cirrus Logic EP93xx SPI controller"
+ depends on ARCH_EP93XX || COMPILE_TEST
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_DW_BT1) += spi-dw-bt1.
+ obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o
+ obj-$(CONFIG_SPI_DW_PCI) += spi-dw-pci.o
+ obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
++obj-$(CONFIG_SPI_AIROHA_EN7523) += spi-en7523.o
+ obj-$(CONFIG_SPI_FALCON) += spi-falcon.o
+ obj-$(CONFIG_SPI_FSI) += spi-fsi.o
+ obj-$(CONFIG_SPI_FSL_CPM) += spi-fsl-cpm.o
+--- /dev/null
++++ b/drivers/spi/spi-en7523.c
+@@ -0,0 +1,313 @@
++// SPDX-License-Identifier: GPL-2.0
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/mod_devicetable.h>
++#include <linux/spi/spi.h>
++
++
++#define ENSPI_READ_IDLE_EN 0x0004
++#define ENSPI_MTX_MODE_TOG 0x0014
++#define ENSPI_RDCTL_FSM 0x0018
++#define ENSPI_MANUAL_EN 0x0020
++#define ENSPI_MANUAL_OPFIFO_EMPTY 0x0024
++#define ENSPI_MANUAL_OPFIFO_WDATA 0x0028
++#define ENSPI_MANUAL_OPFIFO_FULL 0x002C
++#define ENSPI_MANUAL_OPFIFO_WR 0x0030
++#define ENSPI_MANUAL_DFIFO_FULL 0x0034
++#define ENSPI_MANUAL_DFIFO_WDATA 0x0038
++#define ENSPI_MANUAL_DFIFO_EMPTY 0x003C
++#define ENSPI_MANUAL_DFIFO_RD 0x0040
++#define ENSPI_MANUAL_DFIFO_RDATA 0x0044
++#define ENSPI_IER 0x0090
++#define ENSPI_NFI2SPI_EN 0x0130
++
++// TODO not in spi block
++#define ENSPI_CLOCK_DIVIDER ((void __iomem *)0x1fa201c4)
++
++#define OP_CSH 0x00
++#define OP_CSL 0x01
++#define OP_CK 0x02
++#define OP_OUTS 0x08
++#define OP_OUTD 0x09
++#define OP_OUTQ 0x0A
++#define OP_INS 0x0C
++#define OP_INS0 0x0D
++#define OP_IND 0x0E
++#define OP_INQ 0x0F
++#define OP_OS2IS 0x10
++#define OP_OS2ID 0x11
++#define OP_OS2IQ 0x12
++#define OP_OD2IS 0x13
++#define OP_OD2ID 0x14
++#define OP_OD2IQ 0x15
++#define OP_OQ2IS 0x16
++#define OP_OQ2ID 0x17
++#define OP_OQ2IQ 0x18
++#define OP_OSNIS 0x19
++#define OP_ODNID 0x1A
++
++#define MATRIX_MODE_AUTO 1
++#define CONF_MTX_MODE_AUTO 0
++#define MANUALEN_AUTO 0
++#define MATRIX_MODE_MANUAL 0
++#define CONF_MTX_MODE_MANUAL 9
++#define MANUALEN_MANUAL 1
++
++#define _ENSPI_MAX_XFER 0x1ff
++
++#define REG(x) (iobase + x)
++
++
++static void __iomem *iobase;
++
++
++static void opfifo_write(u32 cmd, u32 len)
++{
++ u32 tmp = ((cmd & 0x1f) << 9) | (len & 0x1ff);
++
++ writel(tmp, REG(ENSPI_MANUAL_OPFIFO_WDATA));
++
++ /* Wait for room in OPFIFO */
++ while (readl(REG(ENSPI_MANUAL_OPFIFO_FULL)))
++ ;
++
++ /* Shift command into OPFIFO */
++ writel(1, REG(ENSPI_MANUAL_OPFIFO_WR));
++
++ /* Wait for command to finish */
++ while (!readl(REG(ENSPI_MANUAL_OPFIFO_EMPTY)))
++ ;
++}
++
++static void set_cs(int state)
++{
++ if (state)
++ opfifo_write(OP_CSH, 1);
++ else
++ opfifo_write(OP_CSL, 1);
++}
++
++static void manual_begin_cmd(void)
++{
++ /* Disable read idle state */
++ writel(0, REG(ENSPI_READ_IDLE_EN));
++
++ /* Wait for FSM to reach idle state */
++ while (readl(REG(ENSPI_RDCTL_FSM)))
++ ;
++
++ /* Set SPI core to manual mode */
++ writel(CONF_MTX_MODE_MANUAL, REG(ENSPI_MTX_MODE_TOG));
++ writel(MANUALEN_MANUAL, REG(ENSPI_MANUAL_EN));
++}
++
++static void manual_end_cmd(void)
++{
++ /* Set SPI core to auto mode */
++ writel(CONF_MTX_MODE_AUTO, REG(ENSPI_MTX_MODE_TOG));
++ writel(MANUALEN_AUTO, REG(ENSPI_MANUAL_EN));
++
++ /* Enable read idle state */
++ writel(1, REG(ENSPI_READ_IDLE_EN));
++}
++
++static void dfifo_read(u8 *buf, int len)
++{
++ int i;
++
++ for (i = 0; i < len; i++) {
++ /* Wait for requested data to show up in DFIFO */
++ while (readl(REG(ENSPI_MANUAL_DFIFO_EMPTY)))
++ ;
++ buf[i] = readl(REG(ENSPI_MANUAL_DFIFO_RDATA));
++ /* Queue up next byte */
++ writel(1, REG(ENSPI_MANUAL_DFIFO_RD));
++ }
++}
++
++static void dfifo_write(const u8 *buf, int len)
++{
++ int i;
++
++ for (i = 0; i < len; i++) {
++ /* Wait for room in DFIFO */
++ while (readl(REG(ENSPI_MANUAL_DFIFO_FULL)))
++ ;
++ writel(buf[i], REG(ENSPI_MANUAL_DFIFO_WDATA));
++ }
++}
++
++#if 0
++static void set_spi_clock_speed(int freq_mhz)
++{
++ u32 tmp, val;
++
++ tmp = readl(ENSPI_CLOCK_DIVIDER);
++ tmp &= 0xffff0000;
++ writel(tmp, ENSPI_CLOCK_DIVIDER);
++
++ val = (400 / (freq_mhz * 2));
++ tmp |= (val << 8) | 1;
++ writel(tmp, ENSPI_CLOCK_DIVIDER);
++}
++#endif
++
++static void init_hw(void)
++{
++ /* Disable manual/auto mode clash interrupt */
++ writel(0, REG(ENSPI_IER));
++
++ // TODO via clk framework
++ // set_spi_clock_speed(50);
++
++ /* Disable DMA */
++ writel(0, REG(ENSPI_NFI2SPI_EN));
++}
++
++static int xfer_read(struct spi_transfer *xfer)
++{
++ int opcode;
++ uint8_t *buf = xfer->rx_buf;
++
++ switch (xfer->rx_nbits) {
++ case SPI_NBITS_SINGLE:
++ opcode = OP_INS;
++ break;
++ case SPI_NBITS_DUAL:
++ opcode = OP_IND;
++ break;
++ case SPI_NBITS_QUAD:
++ opcode = OP_INQ;
++ break;
++ }
++
++ opfifo_write(opcode, xfer->len);
++ dfifo_read(buf, xfer->len);
++
++ return xfer->len;
++}
++
++static int xfer_write(struct spi_transfer *xfer, int next_xfer_is_rx)
++{
++ int opcode;
++ const uint8_t *buf = xfer->tx_buf;
++
++ if (next_xfer_is_rx) {
++ /* need to use Ox2Ix opcode to set the core to input afterwards */
++ switch (xfer->tx_nbits) {
++ case SPI_NBITS_SINGLE:
++ opcode = OP_OS2IS;
++ break;
++ case SPI_NBITS_DUAL:
++ opcode = OP_OS2ID;
++ break;
++ case SPI_NBITS_QUAD:
++ opcode = OP_OS2IQ;
++ break;
++ }
++ } else {
++ switch (xfer->tx_nbits) {
++ case SPI_NBITS_SINGLE:
++ opcode = OP_OUTS;
++ break;
++ case SPI_NBITS_DUAL:
++ opcode = OP_OUTD;
++ break;
++ case SPI_NBITS_QUAD:
++ opcode = OP_OUTQ;
++ break;
++ }
++ }
++
++ opfifo_write(opcode, xfer->len);
++ dfifo_write(buf, xfer->len);
++
++ return xfer->len;
++}
++
++size_t max_transfer_size(struct spi_device *spi)
++{
++ return _ENSPI_MAX_XFER;
++}
++
++int transfer_one_message(struct spi_controller *ctrl, struct spi_message *msg)
++{
++ struct spi_transfer *xfer;
++ int next_xfer_is_rx = 0;
++
++ manual_begin_cmd();
++ set_cs(0);
++ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
++ if (xfer->tx_buf) {
++ if (!list_is_last(&xfer->transfer_list, &msg->transfers)
++ && list_next_entry(xfer, transfer_list)->rx_buf != NULL)
++ next_xfer_is_rx = 1;
++ else
++ next_xfer_is_rx = 0;
++ msg->actual_length += xfer_write(xfer, next_xfer_is_rx);
++ } else if (xfer->rx_buf) {
++ msg->actual_length += xfer_read(xfer);
++ }
++ }
++ set_cs(1);
++ manual_end_cmd();
++
++ msg->status = 0;
++ spi_finalize_current_message(ctrl);
++
++ return 0;
++}
++
++static int spi_probe(struct platform_device *pdev)
++{
++ struct spi_controller *ctrl;
++ int err;
++
++ ctrl = devm_spi_alloc_master(&pdev->dev, 0);
++ if (!ctrl) {
++ dev_err(&pdev->dev, "Error allocating SPI controller\n");
++ return -ENOMEM;
++ }
++
++ iobase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
++ if (IS_ERR(iobase)) {
++ dev_err(&pdev->dev, "Could not map SPI register address");
++ return -ENOMEM;
++ }
++
++ init_hw();
++
++ ctrl->dev.of_node = pdev->dev.of_node;
++ ctrl->flags = SPI_CONTROLLER_HALF_DUPLEX;
++ ctrl->mode_bits = SPI_RX_DUAL | SPI_TX_DUAL;
++ ctrl->max_transfer_size = max_transfer_size;
++ ctrl->transfer_one_message = transfer_one_message;
++ err = devm_spi_register_controller(&pdev->dev, ctrl);
++ if (err) {
++ dev_err(&pdev->dev, "Could not register SPI controller\n");
++ return -ENODEV;
++ }
++
++ return 0;
++}
++
++static const struct of_device_id spi_of_ids[] = {
++ { .compatible = "airoha,en7523-spi" },
++ { /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, spi_of_ids);
++
++static struct platform_driver spi_driver = {
++ .probe = spi_probe,
++ .driver = {
++ .name = "airoha-en7523-spi",
++ .of_match_table = spi_of_ids,
++ },
++};
++
++module_platform_driver(spi_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
++MODULE_DESCRIPTION("Airoha EN7523 SPI driver");
--- /dev/null
+From b3b76fc86f0fb4d98918f48c784138bfa950dff6 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 15 Jun 2022 14:53:34 +0200
+Subject: [PATCH] PCI: mediatek: Allow building for ARCH_AIROHA
+
+Allow selecting the pcie-mediatek driver if ARCH_AIROHA is set, because the
+Airoha EN7523 SoC uses the same controller as MT7622.
+
+The driver itself is not modified. The PCIe controller DT node should use
+mediatek,mt7622-pcie after airoha,en7523-pcie.
+
+Link: https://lore.kernel.org/r/20220615125335.96089-2-nbd@nbd.name
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
+Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
+---
+ drivers/pci/controller/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/pci/controller/Kconfig
++++ b/drivers/pci/controller/Kconfig
+@@ -233,7 +233,7 @@ config PCIE_ROCKCHIP_EP
+
+ config PCIE_MEDIATEK
+ tristate "MediaTek PCIe controller"
+- depends on ARCH_MEDIATEK || COMPILE_TEST
++ depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
+ depends on PCI_MSI_IRQ_DOMAIN
+ help
projects / openwrt / staging / thess.git / commitdiff