Asus WL-330gE Support

Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.

Signed-off-by: David Cooper <dave@kupesoft.com>
SVN-Revision: 14624

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index e47f28101b80ab3d6f0a5c2d29087abea84470c1..341880a70ea26bc8db7e179c37efa86d6944aecb 100644 (file)
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -68,6 +68,7 @@ enum {
        WLHDD,
        WL300G,
        WL320GE,
+       WL330GE,
        WL500G,
        WL500GD,
        WL500GP,
@@ -307,6 +308,15 @@ static struct platform_t __initdata platforms[] = {
                        { .name = "link",       .gpio = 1 << 11, .polarity = REVERSE },
                },
        },
+       [WL330GE] = {
+               .name           = "ASUS WL-330gE",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 2 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
        [WL500G] = {
                .name           = "ASUS WL-500g",
                .buttons        = {
@@ -764,6 +774,8 @@ static struct platform_t __init *platform_detect(void)
                        return &platforms[WL520GC];
                if (startswith(buf,"WL520GU-")) /* WL520GU-* */
                        return &platforms[WL520GU];
+               if (startswith(buf,"WL330GE-")) /* WL330GE-* */
+                       return &platforms[WL330GE];
        }
 
        /* Based on "ModelId" */

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 44e2de25c93cd7305da6c399ae262fdfb87bb06c..a53209e06a26cbc2bd35bb582b0792436d6ccd63 100755 (executable)
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -57,6 +57,12 @@ start() {
                        c["wan_ifname"] = ""
                        c["lan_ifname"] = "eth1"
                }
+               if (model == "ASUS WL-330gE") {
+                       c["wan_ifname"] = ""
+                       c["lan_ifname"] = "eth0"
+                       c["vlan0ports"] = ""
+                       c["vlan1ports"] = ""
+               }
                if (model == "ASUS WL-500g") {
                        c["wan_ifname"] = "eth1"
                        c["lan_ifname"] = "eth0"
@@ -149,12 +155,14 @@ start() {
                        c["vlan1ports"] = ""
                }
 
-               print "#### VLAN configuration "
-               print "config switch eth0"
-               p("vlan0", "vlan0ports")
-               p("vlan1", "vlan1ports")
-               print ""
-               print ""
+               if (c["vlan0ports"] || c["vlan1ports"]) {
+                       print "#### VLAN configuration "
+                       print "config switch eth0"
+                       p("vlan0", "vlan0ports")
+                       p("vlan1", "vlan1ports")
+                       print ""
+                       print ""
+               }
                print "#### Loopback configuration"
                print "config interface loopback"
                print " option ifname   \"lo\""
@@ -173,10 +181,16 @@ start() {
                print " option netmask  255.255.255.0"
                print ""
                print ""
-               print "#### WAN configuration"
-               print "config interface wan"
-               p("ifname", "wan_ifname")
-               p("macaddr", "wan_macaddr")
-               print " option proto    dhcp"
+               if (c["wan_ifname"]) {
+                       print "#### WAN configuration"
+                       print "config interface wan"
+                       p("ifname", "wan_ifname")
+                       p("macaddr", "wan_macaddr")
+                       print " option proto    dhcp"
+               } else {
+                       print "#### WAN configuration (disabled)"
+                       print "#config interface wan"
+                       print "#        option proto    dhcp"
+               }
        }' > /etc/config/network
 }