ramips: add support for Mercusys MR70X
authorDavid Bauer <mail@david-bauer.net>
Thu, 23 Mar 2023 22:53:47 +0000 (23:53 +0100)
committerDavid Bauer <mail@david-bauer.net>
Fri, 24 Mar 2023 15:04:38 +0000 (16:04 +0100)
Hardware
========
- SoC: MediaTek MT7621AT (880MHz, Duel-Core)
- RAM: DDR3 128MB
- Flash: Winbond W25Q128JV (SPI-NOR 16MB)
- WiFi: MediaTek MT7915D (2.4GHz, 5GHz, DBDC)
- Ethernet: MediaTek MT7530 (WAN x1, LAN x3, SoC)
- UART: >TX RX GND 3v3 (115200 8N1, J1)
        Do not connect 3v3. TX is marked with an arrow.

Installation
============
Flash factory image. This can be done using stock web ui.

Revert to stock firmware
========================
Flash stock firmware via OEM Web UI Recovery mode.

Web UI Recovery method
======================
1. Unplug the router
2. Plug in and hold reset button 5~10 secs
3. Set your computer IP address manually to 192.168.1.x / 255.255.255.0
4. Flash image with web browser to 192.168.1.1

Co-authored-by: Robert Senderek <robert.senderek@10g.pl>
Co-authored-by: Yoonji Park <koreapyj@dcmys.kr>
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 47de2c686291e69afc9f443e27e1dfd11ed5fbe7)

target/linux/ramips/dts/mt7621_mercusys_mr70x-v1.dts [new file with mode: 0644]
target/linux/ramips/image/mt7621.mk
target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

diff --git a/target/linux/ramips/dts/mt7621_mercusys_mr70x-v1.dts b/target/linux/ramips/dts/mt7621_mercusys_mr70x-v1.dts
new file mode 100644 (file)
index 0000000..7eb94ba
--- /dev/null
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "mercusys,mr70x-v1", "mediatek,mt7621-soc";
+       model = "Mercusys MR70X v1";
+
+       aliases {
+               led-boot = &led_power_green;
+               led-failsafe = &led_power_orange;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_orange;
+               label-mac-device = &gmac0;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power_green: power-green {
+                       label = "green:power";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power_orange: power-orange {
+                       label = "orange:power";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <80000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x040000 0xf60000>;
+                       };
+
+                       config: partition@fa0000 {
+                               label = "config";
+                               reg = <0xfa0000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@fb0000 {
+                               label = "tplink";
+                               reg = <0xfb0000 0x040000>;
+                               read-only;
+                       };
+
+                       radio: partition@ff0000 {
+                               label = "radio";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&radio 0x0>;
+               nvmem-cells = <&macaddr_config_8>;
+               nvmem-cell-names = "mac-address";
+               mediatek,disable-radar-background;
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_config_8>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy0>;
+
+       nvmem-cells = <&macaddr_config_8>;
+       nvmem-cell-names = "mac-address";
+       mac-address-increment = <1>;
+};
+
+&mdio {
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+};
+
+&switch0 {
+       ports {
+               port@1 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan3";
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "i2c", "uart3";
+               function = "gpio";
+       };
+};
+
+&config {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_config_8: macaddr@8 {
+               reg = <0x8 0x6>;
+       };
+};
index 11a1e4cb6ac931112cfe4915919d063575b0ab18..df2b935c886df50badb2cfed64d803e36f995894 100644 (file)
@@ -1143,6 +1143,19 @@ define Device/mediatek_mt7621-eval-board
 endef
 TARGET_DEVICES += mediatek_mt7621-eval-board
 
+define Device/mercusys_mr70x-v1
+  $(Device/dsa-migration)
+  $(Device/tplink-safeloader)
+  DEVICE_VENDOR := Mercusys
+  DEVICE_MODEL := MR70X
+  DEVICE_VARIANT := v1
+  DEVICE_PACKAGES := kmod-mt7915e -uboot-envtools
+  TPLINK_BOARD_ID := MR70X
+  KERNEL := $(KERNEL_DTB) | uImage lzma
+  IMAGE_SIZE := 15744k
+endef
+TARGET_DEVICES += mercusys_mr70x-v1
+
 define Device/MikroTik
   $(Device/dsa-migration)
   DEVICE_VENDOR := MikroTik
index d4f259e141b351b7311bf3d6504d47f9568fe810..07cfd9c51a7527113938dfdf761509eaeddb9f7a 100644 (file)
@@ -75,6 +75,11 @@ case "$board" in
                [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
                [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
                ;;
+       mercusys,mr70x-v1|\
+       tplink,archer-ax23-v1)
+               hw_mac_addr="$(mtd_get_mac_binary config 0x8)"
+               [ "$PHYNBR" = "1" ] &&  macaddr_add "$hw_mac_addr" -1 > "/sys${DEVPATH}/macaddress"
+               ;;
        mts,wg430223)
                hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
                [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
@@ -98,10 +103,6 @@ case "$board" in
                hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
                [ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
                ;;
-       tplink,archer-ax23-v1)
-               hw_mac_addr="$(mtd_get_mac_binary config 0x8)"
-               [ "$PHYNBR" = "1" ] &&  macaddr_add "$hw_mac_addr" -1 > "/sys${DEVPATH}/macaddress"
-               ;;
        tplink,eap615-wall-v1)
                hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)"
                macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress"