return tid;
}
-void iwl_mvm_rs_init_wk(struct work_struct *wk)
-{
- struct iwl_mvm_sta *mvmsta = container_of(wk, struct iwl_mvm_sta,
- rs_init_wk);
- struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif);
- struct ieee80211_sta *sta;
-
- rcu_read_lock();
-
- sta = rcu_dereference(mvmvif->mvm->fw_id_to_mac_id[mvmsta->sta_id]);
- if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) {
- rcu_read_unlock();
- return;
- }
-
- iwl_mvm_rs_rate_init(mvmvif->mvm, sta, mvmvif->phy_ctxt->channel->band,
- true);
-
- rcu_read_unlock();
-}
-
-static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm,
- struct ieee80211_sta *sta,
- int tid, struct ieee80211_tx_info *info,
- bool ndp)
-{
- int legacy_success;
- int retries;
- int i;
- struct iwl_lq_cmd *table;
- u32 lq_hwrate;
- struct rs_rate lq_rate, tx_resp_rate;
- struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
- u32 tlc_info = (uintptr_t)info->status.status_driver_data[0];
- u8 reduced_txp = tlc_info & RS_DRV_DATA_TXP_MSK;
- u8 lq_color = RS_DRV_DATA_LQ_COLOR_GET(tlc_info);
- u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1];
- struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
- struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta.rs_drv;
-
- /* Treat uninitialized rate scaling data same as non-existing. */
- if (!lq_sta) {
- IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n");
- return;
- } else if (!lq_sta->pers.drv) {
- IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n");
- return;
- }
-
- /* This packet was aggregated but doesn't carry status info */
- if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
- !(info->flags & IEEE80211_TX_STAT_AMPDU))
- return;
-
- if (rs_rate_from_ucode_rate(tx_resp_hwrate, info->band,
- &tx_resp_rate)) {
- WARN_ON_ONCE(1);
- return;
- }
-
-#ifdef CONFIG_MAC80211_DEBUGFS
- /* Disable last tx check if we are debugging with fixed rate but
- * update tx stats */
- if (lq_sta->pers.dbg_fixed_rate) {
- int index = tx_resp_rate.index;
- enum rs_column column;
- int attempts, success;
-
- column = rs_get_column_from_rate(&tx_resp_rate);
- if (WARN_ONCE(column == RS_COLUMN_INVALID,
- "Can't map rate 0x%x to column",
- tx_resp_hwrate))
- return;
-
- if (info->flags & IEEE80211_TX_STAT_AMPDU) {
- attempts = info->status.ampdu_len;
- success = info->status.ampdu_ack_len;
- } else {
- attempts = info->status.rates[0].count;
- success = !!(info->flags & IEEE80211_TX_STAT_ACK);
- }
-
- lq_sta->pers.tx_stats[column][index].total += attempts;
- lq_sta->pers.tx_stats[column][index].success += success;
-
- IWL_DEBUG_RATE(mvm, "Fixed rate 0x%x success %d attempts %d\n",
- tx_resp_hwrate, success, attempts);
- return;
- }
-#endif
-
- if (time_after(jiffies,
- (unsigned long)(lq_sta->last_tx +
- (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) {
- IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n");
- schedule_work(&mvmsta->rs_init_wk);
- return;
- }
- lq_sta->last_tx = jiffies;
-
- /* Ignore this Tx frame response if its initial rate doesn't match
- * that of latest Link Quality command. There may be stragglers
- * from a previous Link Quality command, but we're no longer interested
- * in those; they're either from the "active" mode while we're trying
- * to check "search" mode, or a prior "search" mode after we've moved
- * to a new "search" mode (which might become the new "active" mode).
- */
- table = &lq_sta->lq;
- lq_hwrate = le32_to_cpu(table->rs_table[0]);
- if (rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate)) {
- WARN_ON_ONCE(1);
- return;
- }
-
- /* Here we actually compare this rate to the latest LQ command */
- if (lq_color != LQ_FLAG_COLOR_GET(table->flags)) {
- IWL_DEBUG_RATE(mvm,
- "tx resp color 0x%x does not match 0x%x\n",
- lq_color, LQ_FLAG_COLOR_GET(table->flags));
-
- /*
- * Since rates mis-match, the last LQ command may have failed.
- * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
- * ... driver.
- */
- lq_sta->missed_rate_counter++;
- if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) {
- lq_sta->missed_rate_counter = 0;
- IWL_DEBUG_RATE(mvm,
- "Too many rates mismatch. Send sync LQ. rs_state %d\n",
- lq_sta->rs_state);
- iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq);
- }
- /* Regardless, ignore this status info for outdated rate */
- return;
- } else
- /* Rate did match, so reset the missed_rate_counter */
- lq_sta->missed_rate_counter = 0;
-
- if (!lq_sta->search_better_tbl) {
- curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
- other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
- } else {
- curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
- other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
- }
-
- if (WARN_ON_ONCE(!rs_rate_column_match(&lq_rate, &curr_tbl->rate))) {
- IWL_DEBUG_RATE(mvm,
- "Neither active nor search matches tx rate\n");
- tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
- rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE");
- tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
- rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH");
- rs_dump_rate(mvm, &lq_rate, "ACTUAL");
-
- /*
- * no matching table found, let's by-pass the data collection
- * and continue to perform rate scale to find the rate table
- */
- rs_stay_in_table(lq_sta, true);
- goto done;
- }
-
- /*
- * Updating the frame history depends on whether packets were
- * aggregated.
- *
- * For aggregation, all packets were transmitted at the same rate, the
- * first index into rate scale table.
- */
- if (info->flags & IEEE80211_TX_STAT_AMPDU) {
- rs_collect_tpc_data(mvm, lq_sta, curr_tbl, tx_resp_rate.index,
- info->status.ampdu_len,
- info->status.ampdu_ack_len,
- reduced_txp);
-
- /* ampdu_ack_len = 0 marks no BA was received. For TLC, treat
- * it as a single frame loss as we don't want the success ratio
- * to dip too quickly because a BA wasn't received.
- * For TPC, there's no need for this optimisation since we want
- * to recover very quickly from a bad power reduction and,
- * therefore we'd like the success ratio to get an immediate hit
- * when failing to get a BA, so we'd switch back to a lower or
- * zero power reduction. When FW transmits agg with a rate
- * different from the initial rate, it will not use reduced txp
- * and will send BA notification twice (one empty with reduced
- * txp equal to the value from LQ and one with reduced txp 0).
- * We need to update counters for each txp level accordingly.
- */
- if (info->status.ampdu_ack_len == 0)
- info->status.ampdu_len = 1;
-
- rs_collect_tlc_data(mvm, mvmsta, tid, curr_tbl,
- tx_resp_rate.index,
- info->status.ampdu_len,
- info->status.ampdu_ack_len);
-
- /* Update success/fail counts if not searching for new mode */
- if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) {
- lq_sta->total_success += info->status.ampdu_ack_len;
- lq_sta->total_failed += (info->status.ampdu_len -
- info->status.ampdu_ack_len);
- }
- } else {
- /* For legacy, update frame history with for each Tx retry. */
- retries = info->status.rates[0].count - 1;
- /* HW doesn't send more than 15 retries */
- retries = min(retries, 15);
-
- /* The last transmission may have been successful */
- legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
- /* Collect data for each rate used during failed TX attempts */
- for (i = 0; i <= retries; ++i) {
- lq_hwrate = le32_to_cpu(table->rs_table[i]);
- if (rs_rate_from_ucode_rate(lq_hwrate, info->band,
- &lq_rate)) {
- WARN_ON_ONCE(1);
- return;
- }
-
- /*
- * Only collect stats if retried rate is in the same RS
- * table as active/search.
- */
- if (rs_rate_column_match(&lq_rate, &curr_tbl->rate))
- tmp_tbl = curr_tbl;
- else if (rs_rate_column_match(&lq_rate,
- &other_tbl->rate))
- tmp_tbl = other_tbl;
- else
- continue;
-
- rs_collect_tpc_data(mvm, lq_sta, tmp_tbl,
- tx_resp_rate.index, 1,
- i < retries ? 0 : legacy_success,
- reduced_txp);
- rs_collect_tlc_data(mvm, mvmsta, tid, tmp_tbl,
- tx_resp_rate.index, 1,
- i < retries ? 0 : legacy_success);
- }
-
- /* Update success/fail counts if not searching for new mode */
- if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) {
- lq_sta->total_success += legacy_success;
- lq_sta->total_failed += retries + (1 - legacy_success);
- }
- }
- /* The last TX rate is cached in lq_sta; it's set in if/else above */
- lq_sta->last_rate_n_flags = lq_hwrate;
- IWL_DEBUG_RATE(mvm, "reduced txpower: %d\n", reduced_txp);
-done:
- /* See if there's a better rate or modulation mode to try. */
- if (sta->supp_rates[info->band])
- rs_rate_scale_perform(mvm, sta, lq_sta, tid, ndp);
-}
-
-void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
- int tid, struct ieee80211_tx_info *info, bool ndp)
-{
- struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
-
- /* If it's locked we are in middle of init flow
- * just wait for next tx status to update the lq_sta data
- */
- if (!mutex_trylock(&mvmsta->lq_sta.rs_drv.mutex))
- return;
-
- __iwl_mvm_rs_tx_status(mvm, sta, tid, info, ndp);
- mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex);
-}
-
/*
* mac80211 sends us Tx status
*/
struct ieee80211_supported_band *sband;
unsigned long supp; /* must be unsigned long for for_each_set_bit */
+ lockdep_assert_held(&mvmsta->lq_sta.rs_drv.pers.lock);
+
/* clear all non-persistent lq data */
memset(lq_sta, 0, offsetof(typeof(*lq_sta), pers));
iwl_mvm_rs_rate_init(mvm, sta, sband->band, true);
}
+static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm,
+ struct ieee80211_sta *sta,
+ int tid, struct ieee80211_tx_info *info,
+ bool ndp)
+{
+ int legacy_success;
+ int retries;
+ int i;
+ struct iwl_lq_cmd *table;
+ u32 lq_hwrate;
+ struct rs_rate lq_rate, tx_resp_rate;
+ struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
+ u32 tlc_info = (uintptr_t)info->status.status_driver_data[0];
+ u8 reduced_txp = tlc_info & RS_DRV_DATA_TXP_MSK;
+ u8 lq_color = RS_DRV_DATA_LQ_COLOR_GET(tlc_info);
+ u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1];
+ struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+ struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta.rs_drv;
+
+ /* Treat uninitialized rate scaling data same as non-existing. */
+ if (!lq_sta) {
+ IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n");
+ return;
+ } else if (!lq_sta->pers.drv) {
+ IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n");
+ return;
+ }
+
+ /* This packet was aggregated but doesn't carry status info */
+ if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
+ !(info->flags & IEEE80211_TX_STAT_AMPDU))
+ return;
+
+ if (rs_rate_from_ucode_rate(tx_resp_hwrate, info->band,
+ &tx_resp_rate)) {
+ WARN_ON_ONCE(1);
+ return;
+ }
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+ /* Disable last tx check if we are debugging with fixed rate but
+ * update tx stats
+ */
+ if (lq_sta->pers.dbg_fixed_rate) {
+ int index = tx_resp_rate.index;
+ enum rs_column column;
+ int attempts, success;
+
+ column = rs_get_column_from_rate(&tx_resp_rate);
+ if (WARN_ONCE(column == RS_COLUMN_INVALID,
+ "Can't map rate 0x%x to column",
+ tx_resp_hwrate))
+ return;
+
+ if (info->flags & IEEE80211_TX_STAT_AMPDU) {
+ attempts = info->status.ampdu_len;
+ success = info->status.ampdu_ack_len;
+ } else {
+ attempts = info->status.rates[0].count;
+ success = !!(info->flags & IEEE80211_TX_STAT_ACK);
+ }
+
+ lq_sta->pers.tx_stats[column][index].total += attempts;
+ lq_sta->pers.tx_stats[column][index].success += success;
+
+ IWL_DEBUG_RATE(mvm, "Fixed rate 0x%x success %d attempts %d\n",
+ tx_resp_hwrate, success, attempts);
+ return;
+ }
+#endif
+
+ if (time_after(jiffies,
+ (unsigned long)(lq_sta->last_tx +
+ (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) {
+ IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n");
+ /* reach here only in case of driver RS, call directly
+ * the unlocked version
+ */
+ rs_drv_rate_init(mvm, sta, info->band);
+ return;
+ }
+ lq_sta->last_tx = jiffies;
+
+ /* Ignore this Tx frame response if its initial rate doesn't match
+ * that of latest Link Quality command. There may be stragglers
+ * from a previous Link Quality command, but we're no longer interested
+ * in those; they're either from the "active" mode while we're trying
+ * to check "search" mode, or a prior "search" mode after we've moved
+ * to a new "search" mode (which might become the new "active" mode).
+ */
+ table = &lq_sta->lq;
+ lq_hwrate = le32_to_cpu(table->rs_table[0]);
+ if (rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate)) {
+ WARN_ON_ONCE(1);
+ return;
+ }
+
+ /* Here we actually compare this rate to the latest LQ command */
+ if (lq_color != LQ_FLAG_COLOR_GET(table->flags)) {
+ IWL_DEBUG_RATE(mvm,
+ "tx resp color 0x%x does not match 0x%x\n",
+ lq_color, LQ_FLAG_COLOR_GET(table->flags));
+
+ /* Since rates mis-match, the last LQ command may have failed.
+ * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
+ * ... driver.
+ */
+ lq_sta->missed_rate_counter++;
+ if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) {
+ lq_sta->missed_rate_counter = 0;
+ IWL_DEBUG_RATE(mvm,
+ "Too many rates mismatch. Send sync LQ. rs_state %d\n",
+ lq_sta->rs_state);
+ iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq);
+ }
+ /* Regardless, ignore this status info for outdated rate */
+ return;
+ }
+
+ /* Rate did match, so reset the missed_rate_counter */
+ lq_sta->missed_rate_counter = 0;
+
+ if (!lq_sta->search_better_tbl) {
+ curr_tbl = &lq_sta->lq_info[lq_sta->active_tbl];
+ other_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl];
+ } else {
+ curr_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl];
+ other_tbl = &lq_sta->lq_info[lq_sta->active_tbl];
+ }
+
+ if (WARN_ON_ONCE(!rs_rate_column_match(&lq_rate, &curr_tbl->rate))) {
+ IWL_DEBUG_RATE(mvm,
+ "Neither active nor search matches tx rate\n");
+ tmp_tbl = &lq_sta->lq_info[lq_sta->active_tbl];
+ rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE");
+ tmp_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl];
+ rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH");
+ rs_dump_rate(mvm, &lq_rate, "ACTUAL");
+
+ /* no matching table found, let's by-pass the data collection
+ * and continue to perform rate scale to find the rate table
+ */
+ rs_stay_in_table(lq_sta, true);
+ goto done;
+ }
+
+ /* Updating the frame history depends on whether packets were
+ * aggregated.
+ *
+ * For aggregation, all packets were transmitted at the same rate, the
+ * first index into rate scale table.
+ */
+ if (info->flags & IEEE80211_TX_STAT_AMPDU) {
+ rs_collect_tpc_data(mvm, lq_sta, curr_tbl, tx_resp_rate.index,
+ info->status.ampdu_len,
+ info->status.ampdu_ack_len,
+ reduced_txp);
+
+ /* ampdu_ack_len = 0 marks no BA was received. For TLC, treat
+ * it as a single frame loss as we don't want the success ratio
+ * to dip too quickly because a BA wasn't received.
+ * For TPC, there's no need for this optimisation since we want
+ * to recover very quickly from a bad power reduction and,
+ * therefore we'd like the success ratio to get an immediate hit
+ * when failing to get a BA, so we'd switch back to a lower or
+ * zero power reduction. When FW transmits agg with a rate
+ * different from the initial rate, it will not use reduced txp
+ * and will send BA notification twice (one empty with reduced
+ * txp equal to the value from LQ and one with reduced txp 0).
+ * We need to update counters for each txp level accordingly.
+ */
+ if (info->status.ampdu_ack_len == 0)
+ info->status.ampdu_len = 1;
+
+ rs_collect_tlc_data(mvm, mvmsta, tid, curr_tbl,
+ tx_resp_rate.index,
+ info->status.ampdu_len,
+ info->status.ampdu_ack_len);
+
+ /* Update success/fail counts if not searching for new mode */
+ if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) {
+ lq_sta->total_success += info->status.ampdu_ack_len;
+ lq_sta->total_failed += (info->status.ampdu_len -
+ info->status.ampdu_ack_len);
+ }
+ } else {
+ /* For legacy, update frame history with for each Tx retry. */
+ retries = info->status.rates[0].count - 1;
+ /* HW doesn't send more than 15 retries */
+ retries = min(retries, 15);
+
+ /* The last transmission may have been successful */
+ legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
+ /* Collect data for each rate used during failed TX attempts */
+ for (i = 0; i <= retries; ++i) {
+ lq_hwrate = le32_to_cpu(table->rs_table[i]);
+ if (rs_rate_from_ucode_rate(lq_hwrate, info->band,
+ &lq_rate)) {
+ WARN_ON_ONCE(1);
+ return;
+ }
+
+ /* Only collect stats if retried rate is in the same RS
+ * table as active/search.
+ */
+ if (rs_rate_column_match(&lq_rate, &curr_tbl->rate))
+ tmp_tbl = curr_tbl;
+ else if (rs_rate_column_match(&lq_rate,
+ &other_tbl->rate))
+ tmp_tbl = other_tbl;
+ else
+ continue;
+
+ rs_collect_tpc_data(mvm, lq_sta, tmp_tbl,
+ tx_resp_rate.index, 1,
+ i < retries ? 0 : legacy_success,
+ reduced_txp);
+ rs_collect_tlc_data(mvm, mvmsta, tid, tmp_tbl,
+ tx_resp_rate.index, 1,
+ i < retries ? 0 : legacy_success);
+ }
+
+ /* Update success/fail counts if not searching for new mode */
+ if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) {
+ lq_sta->total_success += legacy_success;
+ lq_sta->total_failed += retries + (1 - legacy_success);
+ }
+ }
+ /* The last TX rate is cached in lq_sta; it's set in if/else above */
+ lq_sta->last_rate_n_flags = lq_hwrate;
+ IWL_DEBUG_RATE(mvm, "reduced txpower: %d\n", reduced_txp);
+done:
+ /* See if there's a better rate or modulation mode to try. */
+ if (sta->supp_rates[info->band])
+ rs_rate_scale_perform(mvm, sta, lq_sta, tid, ndp);
+}
+
+void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
+ int tid, struct ieee80211_tx_info *info, bool ndp)
+{
+ struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+
+ /* If it's locked we are in middle of init flow
+ * just wait for next tx status to update the lq_sta data
+ */
+ if (!spin_trylock(&mvmsta->lq_sta.rs_drv.pers.lock))
+ return;
+
+ __iwl_mvm_rs_tx_status(mvm, sta, tid, info, ndp);
+ spin_unlock(&mvmsta->lq_sta.rs_drv.pers.lock);
+}
+
#ifdef CONFIG_MAC80211_DEBUGFS
static void rs_build_rates_table_from_fixed(struct iwl_mvm *mvm,
struct iwl_lq_cmd *lq_cmd,
} else {
struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
- mutex_lock(&mvmsta->lq_sta.rs_drv.mutex);
+ spin_lock(&mvmsta->lq_sta.rs_drv.pers.lock);
rs_drv_rate_init(mvm, sta, band);
- mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex);
+ spin_unlock(&mvmsta->lq_sta.rs_drv.pers.lock);
}
}
projects / openwrt / staging / blogic.git / commitdiff