/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
/* Use local offsets on gpiochip/port "G" */
GPIO_LOOKUP_IDX("G", 1, NULL, 0,
};
static struct gpiod_lookup_table avila_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
};
static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
};
static struct gpiod_lookup_table fsg_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
#endif /* CONFIG_MTD_NAND_PLATFORM */
static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
};
static struct gpiod_lookup_table nas100d_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NAS100D_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
};
static struct gpiod_lookup_table nslu2_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", NSLU2_SDA_PIN,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
};
static struct gpiod_lookup_table palmz72_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", 118, NULL, 0,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
/* i2c */
static struct gpiod_lookup_table viper_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.1",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", VIPER_RTC_I2C_SDA_GPIO,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
__setup("tpm=", viper_tpm_setup);
struct gpiod_lookup_table viper_tpm_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", VIPER_TPM_I2C_SDA_GPIO,
NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
* i2c
*/
static struct gpiod_lookup_table simpad_i2c_gpiod_table = {
- .dev_id = "i2c-gpio",
+ .dev_id = "i2c-gpio.0",
.table = {
GPIO_LOOKUP_IDX("gpio", 21, NULL, 0,
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),