clk: tegra: Do not disable PLLE when under hardware control
authorMark Kuo <mkuo@nvidia.com>
Thu, 14 Jan 2016 19:24:36 +0000 (14:24 -0500)
committerThierry Reding <treding@nvidia.com>
Tue, 2 Feb 2016 14:49:25 +0000 (15:49 +0100)
Software should not disable PLLE if PLLE is already put under hardware
control.

Signed-off-by: Mark Kuo <mkuo@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drivers/clk/tegra/clk-pll.c

index 65156486889a6e540ea85d59b9e7ac737649c6d3..d9c3109b75bd5c98ed45699a06c960186da75424 100644 (file)
@@ -2012,7 +2012,7 @@ static int clk_plle_tegra210_enable(struct clk_hw *hw)
        struct tegra_clk_pll *pll = to_clk_pll(hw);
        struct tegra_clk_pll_freq_table sel;
        u32 val;
-       int ret;
+       int ret = 0;
        unsigned long flags = 0;
        unsigned long input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
 
@@ -2022,16 +2022,14 @@ static int clk_plle_tegra210_enable(struct clk_hw *hw)
        if (pll->lock)
                spin_lock_irqsave(pll->lock, flags);
 
+       val = pll_readl(pll->params->aux_reg, pll);
+       if (val & PLLE_AUX_SEQ_ENABLE)
+               goto out;
+
        val = pll_readl_base(pll);
        val &= ~BIT(30); /* Disable lock override */
        pll_writel_base(val, pll);
 
-       val = pll_readl(pll->params->aux_reg, pll);
-       val |= PLLE_AUX_ENABLE_SWCTL;
-       val &= ~PLLE_AUX_SEQ_ENABLE;
-       pll_writel(val, pll->params->aux_reg, pll);
-       udelay(1);
-
        val = pll_readl_misc(pll);
        val |= PLLE_MISC_LOCK_ENABLE;
        val |= PLLE_MISC_IDDQ_SW_CTRL;
@@ -2104,15 +2102,25 @@ static void clk_plle_tegra210_disable(struct clk_hw *hw)
        if (pll->lock)
                spin_lock_irqsave(pll->lock, flags);
 
+       /* If PLLE HW sequencer is enabled, SW should not disable PLLE */
+       val = pll_readl(pll->params->aux_reg, pll);
+       if (val & PLLE_AUX_SEQ_ENABLE)
+               goto out;
+
        val = pll_readl_base(pll);
        val &= ~PLLE_BASE_ENABLE;
        pll_writel_base(val, pll);
 
+       val = pll_readl(pll->params->aux_reg, pll);
+       val |= PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL;
+       pll_writel(val, pll->params->aux_reg, pll);
+
        val = pll_readl_misc(pll);
        val |= PLLE_MISC_IDDQ_SW_CTRL | PLLE_MISC_IDDQ_SW_VALUE;
        pll_writel_misc(val, pll);
        udelay(1);
 
+out:
        if (pll->lock)
                spin_unlock_irqrestore(pll->lock, flags);
 }