--- /dev/null
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <linux/bootmem.h>
+#include <asm/processor.h>
+#include <asm/i387.h>
+#include <asm/msr.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/mtrr.h>
+#include <asm/mce.h>
+#include <asm/pat.h>
+#include <asm/numa.h>
+#ifdef CONFIG_X86_LOCAL_APIC
+#include <asm/mpspec.h>
+#include <asm/apic.h>
+#include <mach_apic.h>
+#endif
+
+#include "cpu.h"
+
+/* We need valid kernel segments for data and code in long mode too
+ * IRET will check the segment types kkeil 2000/10/28
+ * Also sysret mandates a special GDT layout
+ */
+/* The TLS descriptors are currently at a different place compared to i386.
+ Hopefully nobody expects them at a fixed place (Wine?) */
+DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
+ [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
+ [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
+ [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
+ [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
+ [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
+ [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
+} };
+EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
+
+__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+
+/* Current gdt points %fs at the "master" per-cpu area: after this,
+ * it's on the real one. */
+void switch_to_new_gdt(void)
+{
+ struct desc_ptr gdt_descr;
+
+ gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
+ gdt_descr.size = GDT_SIZE - 1;
+ load_gdt(&gdt_descr);
+}
+
+struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
+
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
+{
+ display_cacheinfo(c);
+}
+
+static struct cpu_dev __cpuinitdata default_cpu = {
+ .c_init = default_init,
+ .c_vendor = "Unknown",
+};
+static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
+
+int __cpuinit get_model_name(struct cpuinfo_x86 *c)
+{
+ unsigned int *v;
+
+ if (c->extended_cpuid_level < 0x80000004)
+ return 0;
+
+ v = (unsigned int *) c->x86_model_id;
+ cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
+ cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
+ cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
+ c->x86_model_id[48] = 0;
+ return 1;
+}
+
+
+void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
+{
+ unsigned int n, dummy, eax, ebx, ecx, edx;
+
+ n = c->extended_cpuid_level;
+
+ if (n >= 0x80000005) {
+ cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
+ printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
+ "D cache %dK (%d bytes/line)\n",
+ edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
+ c->x86_cache_size = (ecx>>24) + (edx>>24);
+ /* On K8 L1 TLB is inclusive, so don't count it */
+ c->x86_tlbsize = 0;
+ }
+
+ if (n >= 0x80000006) {
+ cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
+ ecx = cpuid_ecx(0x80000006);
+ c->x86_cache_size = ecx >> 16;
+ c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
+
+ printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
+ c->x86_cache_size, ecx & 0xFF);
+ }
+ if (n >= 0x80000008) {
+ cpuid(0x80000008, &eax, &dummy, &dummy, &dummy);
+ c->x86_virt_bits = (eax >> 8) & 0xff;
+ c->x86_phys_bits = eax & 0xff;
+ }
+}
+
+void __cpuinit detect_ht(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_SMP
+ u32 eax, ebx, ecx, edx;
+ int index_msb, core_bits;
+
+ cpuid(1, &eax, &ebx, &ecx, &edx);
+
+
+ if (!cpu_has(c, X86_FEATURE_HT))
+ return;
+ if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
+ goto out;
+
+ smp_num_siblings = (ebx & 0xff0000) >> 16;
+
+ if (smp_num_siblings == 1) {
+ printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
+ } else if (smp_num_siblings > 1) {
+
+ if (smp_num_siblings > NR_CPUS) {
+ printk(KERN_WARNING "CPU: Unsupported number of "
+ "siblings %d", smp_num_siblings);
+ smp_num_siblings = 1;
+ return;
+ }
+
+ index_msb = get_count_order(smp_num_siblings);
+ c->phys_proc_id = phys_pkg_id(index_msb);
+
+ smp_num_siblings = smp_num_siblings / c->x86_max_cores;
+
+ index_msb = get_count_order(smp_num_siblings);
+
+ core_bits = get_count_order(c->x86_max_cores);
+
+ c->cpu_core_id = phys_pkg_id(index_msb) &
+ ((1 << core_bits) - 1);
+ }
+out:
+ if ((c->x86_max_cores * smp_num_siblings) > 1) {
+ printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
+ c->phys_proc_id);
+ printk(KERN_INFO "CPU: Processor Core ID: %d\n",
+ c->cpu_core_id);
+ }
+
+#endif
+}
+
+static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
+{
+ char *v = c->x86_vendor_id;
+ int i;
+ static int printed;
+
+ for (i = 0; i < X86_VENDOR_NUM; i++) {
+ if (cpu_devs[i]) {
+ if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
+ (cpu_devs[i]->c_ident[1] &&
+ !strcmp(v, cpu_devs[i]->c_ident[1]))) {
+ c->x86_vendor = i;
+ this_cpu = cpu_devs[i];
+ return;
+ }
+ }
+ }
+ if (!printed) {
+ printed++;
+ printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
+ printk(KERN_ERR "CPU: Your system may be unstable.\n");
+ }
+ c->x86_vendor = X86_VENDOR_UNKNOWN;
+}
+
+static void __init early_cpu_support_print(void)
+{
+ int i,j;
+ struct cpu_dev *cpu_devx;
+
+ printk("KERNEL supported cpus:\n");
+ for (i = 0; i < X86_VENDOR_NUM; i++) {
+ cpu_devx = cpu_devs[i];
+ if (!cpu_devx)
+ continue;
+ for (j = 0; j < 2; j++) {
+ if (!cpu_devx->c_ident[j])
+ continue;
+ printk(" %s %s\n", cpu_devx->c_vendor,
+ cpu_devx->c_ident[j]);
+ }
+ }
+}
+
+static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
+
+void __init early_cpu_init(void)
+{
+ struct cpu_vendor_dev *cvdev;
+
+ for (cvdev = __x86cpuvendor_start ;
+ cvdev < __x86cpuvendor_end ;
+ cvdev++)
+ cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
+ early_cpu_support_print();
+ early_identify_cpu(&boot_cpu_data);
+}
+
+/* Do some early cpuid on the boot CPU to get some parameter that are
+ needed before check_bugs. Everything advanced is in identify_cpu
+ below. */
+static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
+{
+ u32 tfms, xlvl;
+
+ c->loops_per_jiffy = loops_per_jiffy;
+ c->x86_cache_size = -1;
+ c->x86_vendor = X86_VENDOR_UNKNOWN;
+ c->x86_model = c->x86_mask = 0; /* So far unknown... */
+ c->x86_vendor_id[0] = '\0'; /* Unset */
+ c->x86_model_id[0] = '\0'; /* Unset */
+ c->x86_clflush_size = 64;
+ c->x86_cache_alignment = c->x86_clflush_size;
+ c->x86_max_cores = 1;
+ c->x86_coreid_bits = 0;
+ c->extended_cpuid_level = 0;
+ memset(&c->x86_capability, 0, sizeof c->x86_capability);
+
+ /* Get vendor name */
+ cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
+ (unsigned int *)&c->x86_vendor_id[0],
+ (unsigned int *)&c->x86_vendor_id[8],
+ (unsigned int *)&c->x86_vendor_id[4]);
+
+ get_cpu_vendor(c);
+
+ /* Initialize the standard set of capabilities */
+ /* Note that the vendor-specific code below might override */
+
+ /* Intel-defined flags: level 0x00000001 */
+ if (c->cpuid_level >= 0x00000001) {
+ __u32 misc;
+ cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
+ &c->x86_capability[0]);
+ c->x86 = (tfms >> 8) & 0xf;
+ c->x86_model = (tfms >> 4) & 0xf;
+ c->x86_mask = tfms & 0xf;
+ if (c->x86 == 0xf)
+ c->x86 += (tfms >> 20) & 0xff;
+ if (c->x86 >= 0x6)
+ c->x86_model += ((tfms >> 16) & 0xF) << 4;
+ if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
+ c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
+ } else {
+ /* Have CPUID level 0 only - unheard of */
+ c->x86 = 4;
+ }
+
+ c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
+#ifdef CONFIG_SMP
+ c->phys_proc_id = c->initial_apicid;
+#endif
+ /* AMD-defined flags: level 0x80000001 */
+ xlvl = cpuid_eax(0x80000000);
+ c->extended_cpuid_level = xlvl;
+ if ((xlvl & 0xffff0000) == 0x80000000) {
+ if (xlvl >= 0x80000001) {
+ c->x86_capability[1] = cpuid_edx(0x80000001);
+ c->x86_capability[6] = cpuid_ecx(0x80000001);
+ }
+ if (xlvl >= 0x80000004)
+ get_model_name(c); /* Default name */
+ }
+
+ /* Transmeta-defined flags: level 0x80860001 */
+ xlvl = cpuid_eax(0x80860000);
+ if ((xlvl & 0xffff0000) == 0x80860000) {
+ /* Don't set x86_cpuid_level here for now to not confuse. */
+ if (xlvl >= 0x80860001)
+ c->x86_capability[2] = cpuid_edx(0x80860001);
+ }
+
+ c->extended_cpuid_level = cpuid_eax(0x80000000);
+ if (c->extended_cpuid_level >= 0x80000007)
+ c->x86_power = cpuid_edx(0x80000007);
+
+ if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
+ cpu_devs[c->x86_vendor]->c_early_init)
+ cpu_devs[c->x86_vendor]->c_early_init(c);
+
+ validate_pat_support(c);
+
+ /* early_param could clear that, but recall get it set again */
+ if (disable_apic)
+ clear_cpu_cap(c, X86_FEATURE_APIC);
+}
+
+/*
+ * This does the hard work of actually picking apart the CPU stuff...
+ */
+void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
+{
+ int i;
+
+ early_identify_cpu(c);
+
+ init_scattered_cpuid_features(c);
+
+ c->apicid = phys_pkg_id(0);
+
+ /*
+ * Vendor-specific initialization. In this section we
+ * canonicalize the feature flags, meaning if there are
+ * features a certain CPU supports which CPUID doesn't
+ * tell us, CPUID claiming incorrect flags, or other bugs,
+ * we handle them here.
+ *
+ * At the end of this section, c->x86_capability better
+ * indicate the features this CPU genuinely supports!
+ */
+ if (this_cpu->c_init)
+ this_cpu->c_init(c);
+
+ detect_ht(c);
+
+ /*
+ * On SMP, boot_cpu_data holds the common feature set between
+ * all CPUs; so make sure that we indicate which features are
+ * common between the CPUs. The first time this routine gets
+ * executed, c == &boot_cpu_data.
+ */
+ if (c != &boot_cpu_data) {
+ /* AND the already accumulated flags with these */
+ for (i = 0; i < NCAPINTS; i++)
+ boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
+ }
+
+ /* Clear all flags overriden by options */
+ for (i = 0; i < NCAPINTS; i++)
+ c->x86_capability[i] &= ~cleared_cpu_caps[i];
+
+#ifdef CONFIG_X86_MCE
+ mcheck_init(c);
+#endif
+ select_idle_routine(c);
+
+#ifdef CONFIG_NUMA
+ numa_add_cpu(smp_processor_id());
+#endif
+
+}
+
+void __cpuinit identify_boot_cpu(void)
+{
+ identify_cpu(&boot_cpu_data);
+}
+
+void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
+{
+ BUG_ON(c == &boot_cpu_data);
+ identify_cpu(c);
+ mtrr_ap_init();
+}
+
+static __init int setup_noclflush(char *arg)
+{
+ setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
+ return 1;
+}
+__setup("noclflush", setup_noclflush);
+
+void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
+{
+ if (c->x86_model_id[0])
+ printk(KERN_CONT "%s", c->x86_model_id);
+
+ if (c->x86_mask || c->cpuid_level >= 0)
+ printk(KERN_CONT " stepping %02x\n", c->x86_mask);
+ else
+ printk(KERN_CONT "\n");
+}
+
+static __init int setup_disablecpuid(char *arg)
+{
+ int bit;
+ if (get_option(&arg, &bit) && bit < NCAPINTS*32)
+ setup_clear_cpu_cap(bit);
+ else
+ return 0;
+ return 1;
+}
+__setup("clearcpuid=", setup_disablecpuid);
+++ /dev/null
-/*
- * Copyright (C) 1995 Linus Torvalds
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/highmem.h>
-#include <linux/bootmem.h>
-#include <linux/module.h>
-#include <asm/processor.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/crash_dump.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-#include <asm/pci-direct.h>
-#include <linux/efi.h>
-#include <linux/acpi.h>
-#include <linux/kallsyms.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/mmzone.h>
-#include <linux/kexec.h>
-#include <linux/cpufreq.h>
-#include <linux/dmi.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-#include <linux/sort.h>
-#include <linux/uaccess.h>
-#include <linux/init_ohci1394_dma.h>
-#include <linux/kvm_para.h>
-
-#include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/vsyscall.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/msr.h>
-#include <asm/desc.h>
-#include <video/edid.h>
-#include <asm/e820.h>
-#include <asm/mpspec.h>
-#include <asm/dma.h>
-#include <asm/gart.h>
-#include <asm/mpspec.h>
-#include <asm/mmu_context.h>
-#include <asm/proto.h>
-#include <asm/setup.h>
-#include <asm/numa.h>
-#include <asm/sections.h>
-#include <asm/dmi.h>
-#include <asm/cacheflush.h>
-#include <asm/mce.h>
-#include <asm/ds.h>
-#include <asm/topology.h>
-#include <asm/trampoline.h>
-#include <asm/pat.h>
-
-#include <mach_apic.h>
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define ARCH_SETUP
-#endif
-
-/*
- * Machine setup..
- */
-
-struct cpuinfo_x86 boot_cpu_data __read_mostly;
-EXPORT_SYMBOL(boot_cpu_data);
-
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
-
-unsigned long mmu_cr4_features;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-unsigned long saved_video_mode;
-
-/*
- * Early DMI memory
- */
-int dmi_alloc_index;
-char dmi_alloc_data[DMI_MAX_DATA];
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct sys_desc_table_struct {
- unsigned short length;
- unsigned char table[0];
-};
-
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-
-extern int root_mountflags;
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-
-static struct resource standard_io_resources[] = {
- { .name = "dma1", .start = 0x00, .end = 0x1f,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "pic1", .start = 0x20, .end = 0x21,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "timer0", .start = 0x40, .end = 0x43,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "timer1", .start = 0x50, .end = 0x53,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "keyboard", .start = 0x60, .end = 0x60,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "keyboard", .start = 0x64, .end = 0x64,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "dma page reg", .start = 0x80, .end = 0x8f,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "pic2", .start = 0xa0, .end = 0xa1,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "dma2", .start = 0xc0, .end = 0xdf,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO },
- { .name = "fpu", .start = 0xf0, .end = 0xff,
- .flags = IORESOURCE_BUSY | IORESOURCE_IO }
-};
-
-#define IORESOURCE_RAM (IORESOURCE_BUSY | IORESOURCE_MEM)
-
-static struct resource data_resource = {
- .name = "Kernel data",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_RAM,
-};
-static struct resource code_resource = {
- .name = "Kernel code",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_RAM,
-};
-static struct resource bss_resource = {
- .name = "Kernel bss",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_RAM,
-};
-
-static void __init early_cpu_init(void);
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
-
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel. This option will be passed
- * by kexec loader to the capture kernel.
- */
-static int __init setup_elfcorehdr(char *arg)
-{
- char *end;
- if (!arg)
- return -EINVAL;
- elfcorehdr_addr = memparse(arg, &end);
- return end > arg ? 0 : -EINVAL;
-}
-early_param("elfcorehdr", setup_elfcorehdr);
-#endif
-
-#ifndef CONFIG_NUMA
-static void __init
-contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
-{
- unsigned long bootmap_size, bootmap;
-
- bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
- bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size,
- PAGE_SIZE);
- if (bootmap == -1L)
- panic("Cannot find bootmem map of size %ld\n", bootmap_size);
- bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
- e820_register_active_regions(0, start_pfn, end_pfn);
- free_bootmem_with_active_regions(0, end_pfn);
- early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT);
- reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
-}
-#endif
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- * from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
- memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
- sizeof(edd.mbr_signature));
- memcpy(edd.edd_info, boot_params.eddbuf, sizeof(edd.edd_info));
- edd.mbr_signature_nr = boot_params.edd_mbr_sig_buf_entries;
- edd.edd_info_nr = boot_params.eddbuf_entries;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-void __attribute__((weak)) __init memory_setup(void)
-{
- machine_specific_memory_setup();
-}
-
-/* Current gdt points %fs at the "master" per-cpu area: after this,
- * it's on the real one. */
-void switch_to_new_gdt(void)
-{
- struct desc_ptr gdt_descr;
-
- gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
- gdt_descr.size = GDT_SIZE - 1;
- load_gdt(&gdt_descr);
-}
-
-/*
- * setup_arch - architecture-specific boot-time initializations
- *
- * Note: On x86_64, fixmaps are ready for use even before this is called.
- */
-void __init setup_arch(char **cmdline_p)
-{
- unsigned i;
-
- printk(KERN_INFO "Command line: %s\n", boot_command_line);
-
- ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
- screen_info = boot_params.screen_info;
- edid_info = boot_params.edid_info;
- saved_video_mode = boot_params.hdr.vid_mode;
- bootloader_type = boot_params.hdr.type_of_loader;
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
- rd_prompt = ((boot_params.hdr.ram_size & RAMDISK_PROMPT_FLAG) != 0);
- rd_doload = ((boot_params.hdr.ram_size & RAMDISK_LOAD_FLAG) != 0);
-#endif
-#ifdef CONFIG_EFI
- if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
- "EL64", 4)) {
- efi_enabled = 1;
- efi_reserve_early();
- }
-#endif
-
- ARCH_SETUP
-
- setup_memory_map();
- copy_edd();
-
- if (!boot_params.hdr.root_flags)
- root_mountflags &= ~MS_RDONLY;
- init_mm.start_code = (unsigned long) &_text;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
- init_mm.brk = (unsigned long) &_end;
-
- code_resource.start = virt_to_phys(&_text);
- code_resource.end = virt_to_phys(&_etext)-1;
- data_resource.start = virt_to_phys(&_etext);
- data_resource.end = virt_to_phys(&_edata)-1;
- bss_resource.start = virt_to_phys(&__bss_start);
- bss_resource.end = virt_to_phys(&__bss_stop)-1;
-
- early_cpu_init();
- early_identify_cpu(&boot_cpu_data);
-
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- parse_setup_data();
-
- parse_early_param();
-
- if (acpi_mps_check()) {
- disable_apic = 1;
- clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
- }
-
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
- if (init_ohci1394_dma_early)
- init_ohci1394_dma_on_all_controllers();
-#endif
-
- finish_e820_parsing();
-
- /* after parse_early_param, so could debug it */
- insert_resource(&iomem_resource, &code_resource);
- insert_resource(&iomem_resource, &data_resource);
- insert_resource(&iomem_resource, &bss_resource);
-
- early_gart_iommu_check();
-
- e820_register_active_regions(0, 0, -1UL);
- /*
- * partially used pages are not usable - thus
- * we are rounding upwards:
- */
- end_pfn = e820_end_of_ram();
-
- /* pre allocte 4k for mptable mpc */
- early_reserve_e820_mpc_new();
- /* update e820 for memory not covered by WB MTRRs */
- mtrr_bp_init();
- if (mtrr_trim_uncached_memory(end_pfn)) {
- remove_all_active_ranges();
- e820_register_active_regions(0, 0, -1UL);
- end_pfn = e820_end_of_ram();
- }
-
- num_physpages = end_pfn;
-
- check_efer();
-
- max_pfn_mapped = init_memory_mapping(0, (end_pfn << PAGE_SHIFT));
- if (efi_enabled)
- efi_init();
-
- vsmp_init();
-
- dmi_scan_machine();
-
- io_delay_init();
-
-#ifdef CONFIG_KVM_CLOCK
- kvmclock_init();
-#endif
-
- /*
- * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
- * Call this early for SRAT node setup.
- */
- acpi_boot_table_init();
-
- /* How many end-of-memory variables you have, grandma! */
- max_low_pfn = end_pfn;
- max_pfn = end_pfn;
- high_memory = (void *)__va(end_pfn * PAGE_SIZE - 1) + 1;
-
- /* Remove active ranges so rediscovery with NUMA-awareness happens */
- remove_all_active_ranges();
-
-#ifdef CONFIG_ACPI_NUMA
- /*
- * Parse SRAT to discover nodes.
- */
- acpi_numa_init();
-#endif
-
-#ifdef CONFIG_NUMA
- numa_initmem_init(0, end_pfn);
-#else
- contig_initmem_init(0, end_pfn);
-#endif
-
- dma32_reserve_bootmem();
-
-#ifdef CONFIG_ACPI_SLEEP
- /*
- * Reserve low memory region for sleep support.
- */
- acpi_reserve_bootmem();
-#endif
-
-#ifdef CONFIG_X86_MPPARSE
- /*
- * Find and reserve possible boot-time SMP configuration:
- */
- find_smp_config();
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
- if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
- unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
- unsigned long ramdisk_size = boot_params.hdr.ramdisk_size;
- unsigned long ramdisk_end = ramdisk_image + ramdisk_size;
- unsigned long end_of_mem = end_pfn << PAGE_SHIFT;
-
- if (ramdisk_end <= end_of_mem) {
- /*
- * don't need to reserve again, already reserved early
- * in x86_64_start_kernel, and early_res_to_bootmem
- * convert that to reserved in bootmem
- */
- initrd_start = ramdisk_image + PAGE_OFFSET;
- initrd_end = initrd_start+ramdisk_size;
- } else {
- free_bootmem(ramdisk_image, ramdisk_size);
- printk(KERN_ERR "initrd extends beyond end of memory "
- "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
- ramdisk_end, end_of_mem);
- initrd_start = 0;
- }
- }
-#endif
- reserve_crashkernel();
-
- reserve_ibft_region();
-
- paging_init();
- map_vsyscall();
-
- early_quirks();
-
- /*
- * Read APIC and some other early information from ACPI tables.
- */
- acpi_boot_init();
-
- init_cpu_to_node();
-
-#ifdef CONFIG_X86_MPPARSE
- /*
- * get boot-time SMP configuration:
- */
- if (smp_found_config)
- get_smp_config();
-#endif
- init_apic_mappings();
- ioapic_init_mappings();
-
- kvm_guest_init();
-
- /*
- * We trust e820 completely. No explicit ROM probing in memory.
- */
- e820_reserve_resources();
- e820_mark_nosave_regions(end_pfn);
-
- /* request I/O space for devices used on all i[345]86 PCs */
- for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
- request_resource(&ioport_resource, &standard_io_resources[i]);
-
- e820_setup_gap();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
- if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
- conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
-#endif
-}
-
-struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
-
-static void __cpuinit default_init(struct cpuinfo_x86 *c)
-{
- display_cacheinfo(c);
-}
-
-static struct cpu_dev __cpuinitdata default_cpu = {
- .c_init = default_init,
- .c_vendor = "Unknown",
-};
-static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
-
-int __cpuinit get_model_name(struct cpuinfo_x86 *c)
-{
- unsigned int *v;
-
- if (c->extended_cpuid_level < 0x80000004)
- return 0;
-
- v = (unsigned int *) c->x86_model_id;
- cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
- cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
- cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
- c->x86_model_id[48] = 0;
- return 1;
-}
-
-
-void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
-{
- unsigned int n, dummy, eax, ebx, ecx, edx;
-
- n = c->extended_cpuid_level;
-
- if (n >= 0x80000005) {
- cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
- printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), "
- "D cache %dK (%d bytes/line)\n",
- edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
- c->x86_cache_size = (ecx>>24) + (edx>>24);
- /* On K8 L1 TLB is inclusive, so don't count it */
- c->x86_tlbsize = 0;
- }
-
- if (n >= 0x80000006) {
- cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
- ecx = cpuid_ecx(0x80000006);
- c->x86_cache_size = ecx >> 16;
- c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
-
- printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
- c->x86_cache_size, ecx & 0xFF);
- }
- if (n >= 0x80000008) {
- cpuid(0x80000008, &eax, &dummy, &dummy, &dummy);
- c->x86_virt_bits = (eax >> 8) & 0xff;
- c->x86_phys_bits = eax & 0xff;
- }
-}
-
-void __cpuinit detect_ht(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
- u32 eax, ebx, ecx, edx;
- int index_msb, core_bits;
-
- cpuid(1, &eax, &ebx, &ecx, &edx);
-
-
- if (!cpu_has(c, X86_FEATURE_HT))
- return;
- if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
- goto out;
-
- smp_num_siblings = (ebx & 0xff0000) >> 16;
-
- if (smp_num_siblings == 1) {
- printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
- } else if (smp_num_siblings > 1) {
-
- if (smp_num_siblings > NR_CPUS) {
- printk(KERN_WARNING "CPU: Unsupported number of "
- "siblings %d", smp_num_siblings);
- smp_num_siblings = 1;
- return;
- }
-
- index_msb = get_count_order(smp_num_siblings);
- c->phys_proc_id = phys_pkg_id(index_msb);
-
- smp_num_siblings = smp_num_siblings / c->x86_max_cores;
-
- index_msb = get_count_order(smp_num_siblings);
-
- core_bits = get_count_order(c->x86_max_cores);
-
- c->cpu_core_id = phys_pkg_id(index_msb) &
- ((1 << core_bits) - 1);
- }
-out:
- if ((c->x86_max_cores * smp_num_siblings) > 1) {
- printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
- c->phys_proc_id);
- printk(KERN_INFO "CPU: Processor Core ID: %d\n",
- c->cpu_core_id);
- }
-
-#endif
-}
-
-static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
-{
- char *v = c->x86_vendor_id;
- int i;
- static int printed;
-
- for (i = 0; i < X86_VENDOR_NUM; i++) {
- if (cpu_devs[i]) {
- if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
- (cpu_devs[i]->c_ident[1] &&
- !strcmp(v, cpu_devs[i]->c_ident[1]))) {
- c->x86_vendor = i;
- this_cpu = cpu_devs[i];
- return;
- }
- }
- }
- if (!printed) {
- printed++;
- printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n");
- printk(KERN_ERR "CPU: Your system may be unstable.\n");
- }
- c->x86_vendor = X86_VENDOR_UNKNOWN;
-}
-
-static void __init early_cpu_support_print(void)
-{
- int i,j;
- struct cpu_dev *cpu_devx;
-
- printk("KERNEL supported cpus:\n");
- for (i = 0; i < X86_VENDOR_NUM; i++) {
- cpu_devx = cpu_devs[i];
- if (!cpu_devx)
- continue;
- for (j = 0; j < 2; j++) {
- if (!cpu_devx->c_ident[j])
- continue;
- printk(" %s %s\n", cpu_devx->c_vendor,
- cpu_devx->c_ident[j]);
- }
- }
-}
-
-static void __init early_cpu_init(void)
-{
- struct cpu_vendor_dev *cvdev;
-
- for (cvdev = __x86cpuvendor_start ;
- cvdev < __x86cpuvendor_end ;
- cvdev++)
- cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
- early_cpu_support_print();
-}
-
-/* Do some early cpuid on the boot CPU to get some parameter that are
- needed before check_bugs. Everything advanced is in identify_cpu
- below. */
-static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
-{
- u32 tfms, xlvl;
-
- c->loops_per_jiffy = loops_per_jiffy;
- c->x86_cache_size = -1;
- c->x86_vendor = X86_VENDOR_UNKNOWN;
- c->x86_model = c->x86_mask = 0; /* So far unknown... */
- c->x86_vendor_id[0] = '\0'; /* Unset */
- c->x86_model_id[0] = '\0'; /* Unset */
- c->x86_clflush_size = 64;
- c->x86_cache_alignment = c->x86_clflush_size;
- c->x86_max_cores = 1;
- c->x86_coreid_bits = 0;
- c->extended_cpuid_level = 0;
- memset(&c->x86_capability, 0, sizeof c->x86_capability);
-
- /* Get vendor name */
- cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
- (unsigned int *)&c->x86_vendor_id[0],
- (unsigned int *)&c->x86_vendor_id[8],
- (unsigned int *)&c->x86_vendor_id[4]);
-
- get_cpu_vendor(c);
-
- /* Initialize the standard set of capabilities */
- /* Note that the vendor-specific code below might override */
-
- /* Intel-defined flags: level 0x00000001 */
- if (c->cpuid_level >= 0x00000001) {
- __u32 misc;
- cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4],
- &c->x86_capability[0]);
- c->x86 = (tfms >> 8) & 0xf;
- c->x86_model = (tfms >> 4) & 0xf;
- c->x86_mask = tfms & 0xf;
- if (c->x86 == 0xf)
- c->x86 += (tfms >> 20) & 0xff;
- if (c->x86 >= 0x6)
- c->x86_model += ((tfms >> 16) & 0xF) << 4;
- if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
- c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
- } else {
- /* Have CPUID level 0 only - unheard of */
- c->x86 = 4;
- }
-
- c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
-#ifdef CONFIG_SMP
- c->phys_proc_id = c->initial_apicid;
-#endif
- /* AMD-defined flags: level 0x80000001 */
- xlvl = cpuid_eax(0x80000000);
- c->extended_cpuid_level = xlvl;
- if ((xlvl & 0xffff0000) == 0x80000000) {
- if (xlvl >= 0x80000001) {
- c->x86_capability[1] = cpuid_edx(0x80000001);
- c->x86_capability[6] = cpuid_ecx(0x80000001);
- }
- if (xlvl >= 0x80000004)
- get_model_name(c); /* Default name */
- }
-
- /* Transmeta-defined flags: level 0x80860001 */
- xlvl = cpuid_eax(0x80860000);
- if ((xlvl & 0xffff0000) == 0x80860000) {
- /* Don't set x86_cpuid_level here for now to not confuse. */
- if (xlvl >= 0x80860001)
- c->x86_capability[2] = cpuid_edx(0x80860001);
- }
-
- c->extended_cpuid_level = cpuid_eax(0x80000000);
- if (c->extended_cpuid_level >= 0x80000007)
- c->x86_power = cpuid_edx(0x80000007);
-
- if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
- cpu_devs[c->x86_vendor]->c_early_init)
- cpu_devs[c->x86_vendor]->c_early_init(c);
-
- validate_pat_support(c);
-
- /* early_param could clear that, but recall get it set again */
- if (disable_apic)
- clear_cpu_cap(c, X86_FEATURE_APIC);
-}
-
-/*
- * This does the hard work of actually picking apart the CPU stuff...
- */
-void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
-{
- int i;
-
- early_identify_cpu(c);
-
- init_scattered_cpuid_features(c);
-
- c->apicid = phys_pkg_id(0);
-
- /*
- * Vendor-specific initialization. In this section we
- * canonicalize the feature flags, meaning if there are
- * features a certain CPU supports which CPUID doesn't
- * tell us, CPUID claiming incorrect flags, or other bugs,
- * we handle them here.
- *
- * At the end of this section, c->x86_capability better
- * indicate the features this CPU genuinely supports!
- */
- if (this_cpu->c_init)
- this_cpu->c_init(c);
-
- detect_ht(c);
-
- /*
- * On SMP, boot_cpu_data holds the common feature set between
- * all CPUs; so make sure that we indicate which features are
- * common between the CPUs. The first time this routine gets
- * executed, c == &boot_cpu_data.
- */
- if (c != &boot_cpu_data) {
- /* AND the already accumulated flags with these */
- for (i = 0; i < NCAPINTS; i++)
- boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
- }
-
- /* Clear all flags overriden by options */
- for (i = 0; i < NCAPINTS; i++)
- c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
-#ifdef CONFIG_X86_MCE
- mcheck_init(c);
-#endif
- select_idle_routine(c);
-
-#ifdef CONFIG_NUMA
- numa_add_cpu(smp_processor_id());
-#endif
-
-}
-
-void __cpuinit identify_boot_cpu(void)
-{
- identify_cpu(&boot_cpu_data);
-}
-
-void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
-{
- BUG_ON(c == &boot_cpu_data);
- identify_cpu(c);
- mtrr_ap_init();
-}
-
-static __init int setup_noclflush(char *arg)
-{
- setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
- return 1;
-}
-__setup("noclflush", setup_noclflush);
-
-void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
-{
- if (c->x86_model_id[0])
- printk(KERN_CONT "%s", c->x86_model_id);
-
- if (c->x86_mask || c->cpuid_level >= 0)
- printk(KERN_CONT " stepping %02x\n", c->x86_mask);
- else
- printk(KERN_CONT "\n");
-}
-
-static __init int setup_disablecpuid(char *arg)
-{
- int bit;
- if (get_option(&arg, &bit) && bit < NCAPINTS*32)
- setup_clear_cpu_cap(bit);
- else
- return 0;
- return 1;
-}
-__setup("clearcpuid=", setup_disablecpuid);
projects / openwrt / staging / blogic.git / commitdiff