arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators

Currently the rates of the xo and sleep clocks are hard-coded in the
GCC driver, but this is a board layout description that actually should
be in the DT. Moving them into DT also allows us to insert the RPM
controlled clocks between the DT and GCC clocks.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 82881948aaeb0aa62e234b5af6018312dd56becf..f9844097640dab37f25db9b3235129f3ce11215a 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -74,6 +74,20 @@
                             <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
        };
 
+       clocks {
+               xo_board: xo_board {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <19200000>;
+               };
+
+               sleep_clk: sleep_clk {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <32768>;
+               };
+       };
+
        soc: soc {
                #address-cells = <1>;
                #size-cells = <1>;