Refreshed all patches.
Fixes:
- CVE-2013-1798
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
-LINUX_VERSION-4.14 = .169
+LINUX_VERSION-4.14 = .171
LINUX_VERSION-4.19 = .101
-LINUX_KERNEL_HASH-4.14.169 = d88ea97993c56b1fa0b0a05061bcde476c6be4fc3bb2de8bd97a8f8ff7278249
+LINUX_KERNEL_HASH-4.14.171 = 4fe02489e4b4a187eccf0ef87df6100534c9d485e76d876b1fa247c7635332a0
LINUX_KERNEL_HASH-4.19.101 = be26156abdb38ac0576a34a235ef456bb8ca67fbbe56fc6649b8d069159f8bc4
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -1299,4 +1299,12 @@ config GPIO_VIPERBOARD
+@@ -1300,4 +1300,12 @@ config GPIO_VIPERBOARD
endmenu
+#endif
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -1251,7 +1251,6 @@ menu "SPI GPIO expanders"
+@@ -1252,7 +1252,6 @@ menu "SPI GPIO expanders"
config GPIO_74X164
tristate "74x164 serial-in/parallel-out 8-bits shift register"
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -1306,4 +1306,9 @@ config GPIO_NXP_74HC153
+@@ -1307,4 +1307,9 @@ config GPIO_NXP_74HC153
Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
provides a GPIO interface supporting input mode only.
* No flags defined yet.
--- a/net/core/utils.c
+++ b/net/core/utils.c
-@@ -424,8 +424,14 @@ void inet_proto_csum_replace16(__sum16 *
+@@ -441,8 +441,14 @@ void inet_proto_csum_replace16(__sum16 *
bool pseudohdr)
{
__be32 diff[] = {
+MODULE_ALIAS("platform:" DRIVER_NAME);
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -1646,6 +1646,13 @@ config PIC32_DMT
+@@ -1647,6 +1647,13 @@ config PIC32_DMT
To compile this driver as a loadable module, choose M here.
The module will be called pic32-dmt.
* No flags defined yet.
--- a/net/core/utils.c
+++ b/net/core/utils.c
-@@ -424,8 +424,14 @@ void inet_proto_csum_replace16(__sum16 *
+@@ -441,8 +441,14 @@ void inet_proto_csum_replace16(__sum16 *
bool pseudohdr)
{
__be32 diff[] = {
#include <linux/uaccess.h>
#include <asm/io.h>
-@@ -2248,6 +2250,69 @@ static void b44_adjust_link(struct net_d
+@@ -2251,6 +2253,69 @@ static void b44_adjust_link(struct net_d
}
}
static int b44_register_phy_one(struct b44 *bp)
{
struct mii_bus *mii_bus;
-@@ -2283,6 +2348,9 @@ static int b44_register_phy_one(struct b
+@@ -2286,6 +2351,9 @@ static int b44_register_phy_one(struct b
if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
(sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
dev_info(sdev->dev,
"could not find PHY at %i, use fixed one\n",
bp->phy_addr);
-@@ -2477,6 +2545,7 @@ static void b44_remove_one(struct ssb_de
+@@ -2480,6 +2548,7 @@ static void b44_remove_one(struct ssb_de
unregister_netdev(dev);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
b44_unregister_phy_one(bp);
if (bp->flags & B44_FLAG_EXTERNAL_PHY)
return 0;
-@@ -2178,6 +2203,8 @@ static int b44_get_invariants(struct b44
+@@ -2181,6 +2206,8 @@ static int b44_get_invariants(struct b44
* valid PHY address. */
bp->phy_addr &= 0x1F;
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -1472,6 +1472,15 @@ config WDT_MTX1
+@@ -1473,6 +1473,15 @@ config WDT_MTX1
Hardware driver for the MTX-1 boards. This is a watchdog timer that
will reboot the machine after a 100 seconds timer expired.
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1226,6 +1226,18 @@ static const struct flash_info *spi_nor_
+@@ -1230,6 +1230,18 @@ static const struct flash_info *spi_nor_
}
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);
config MODULES_TREE_LOOKUP
--- a/kernel/module.c
+++ b/kernel/module.c
-@@ -3022,9 +3022,11 @@ static struct module *setup_load_info(st
+@@ -3024,9 +3024,11 @@ static struct module *setup_load_info(st
static int check_modinfo(struct module *mod, struct load_info *info, int flags)
{
if (flags & MODULE_INIT_IGNORE_VERMAGIC)
modmagic = NULL;
-@@ -3045,6 +3047,7 @@ static int check_modinfo(struct module *
+@@ -3047,6 +3049,7 @@ static int check_modinfo(struct module *
mod->name);
add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
}
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1032,6 +1032,7 @@ static const struct flash_info spi_nor_i
+@@ -1037,6 +1037,7 @@ static const struct flash_info spi_nor_i
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-@@ -1205,11 +1206,12 @@ static const struct flash_info spi_nor_i
+@@ -1209,11 +1210,12 @@ static const struct flash_info spi_nor_i
{ },
};
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
-@@ -1220,10 +1222,16 @@ static const struct flash_info *spi_nor_
+@@ -1224,10 +1226,16 @@ static const struct flash_info *spi_nor_
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
info = &spi_nor_ids[tmp];
if (info->id_len) {
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);
return ERR_PTR(-ENODEV);
-@@ -2683,7 +2691,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2687,7 +2695,7 @@ int spi_nor_scan(struct spi_nor *nor, co
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
if (!info)
if (IS_ERR_OR_NULL(info))
return -ENOENT;
-@@ -2694,7 +2702,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2698,7 +2706,7 @@ int spi_nor_scan(struct spi_nor *nor, co
if (name && info->id_len) {
const struct flash_info *jinfo;
---
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1031,7 +1031,7 @@ static const struct flash_info spi_nor_i
+@@ -1036,7 +1036,7 @@ static const struct flash_info spi_nor_i
{ "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
return 0;
err4:
-@@ -1073,6 +1225,8 @@ static void dwc3_get_properties(struct d
+@@ -1076,6 +1228,8 @@ static void dwc3_get_properties(struct d
&hird_threshold);
dwc->usb3_lpm_capable = device_property_read_bool(dev,
"snps,usb3_lpm_capable");
dwc->disable_scramble_quirk = device_property_read_bool(dev,
"snps,disable_scramble_quirk");
-@@ -1105,8 +1259,16 @@ static void dwc3_get_properties(struct d
+@@ -1108,8 +1262,16 @@ static void dwc3_get_properties(struct d
dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
"snps,dis-tx-ipgap-linecheck-quirk");
device_property_read_u8(dev, "snps,tx_de_emphasis",
&tx_de_emphasis);
device_property_read_string(dev, "snps,hsphy_interface",
-@@ -1117,6 +1279,9 @@ static void dwc3_get_properties(struct d
+@@ -1120,6 +1282,9 @@ static void dwc3_get_properties(struct d
dwc->dis_metastability_quirk = device_property_read_bool(dev,
"snps,dis_metastability_quirk");
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
-@@ -1368,12 +1533,14 @@ static int dwc3_resume_common(struct dwc
+@@ -1371,12 +1536,14 @@ static int dwc3_resume_common(struct dwc
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
if (kvm_is_device_pfn(pfn)) {
mem_type = PAGE_S2_DEVICE;
flags |= KVM_S2PTE_FLAG_IS_IOMAP;
-@@ -1918,6 +1961,9 @@ int kvm_arch_prepare_memory_region(struc
+@@ -1919,6 +1962,9 @@ int kvm_arch_prepare_memory_region(struc
gpa_t gpa = mem->guest_phys_addr +
(vm_start - mem->userspace_addr);
phys_addr_t pa;
pa = (phys_addr_t)vma->vm_pgoff << PAGE_SHIFT;
pa += vm_start - vma->vm_start;
-@@ -1928,9 +1974,13 @@ int kvm_arch_prepare_memory_region(struc
+@@ -1929,9 +1975,13 @@ int kvm_arch_prepare_memory_region(struc
goto out;
}
case SNOR_MFR_MICRON:
/* Some Micron need WREN command; all will accept it */
need_wren = true;
-@@ -1039,7 +1040,7 @@ static const struct flash_info spi_nor_i
+@@ -1044,7 +1045,7 @@ static const struct flash_info spi_nor_i
{ "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
{ "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
{ "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
-@@ -1054,6 +1055,12 @@ static const struct flash_info spi_nor_i
+@@ -1059,6 +1060,12 @@ static const struct flash_info spi_nor_i
{ "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
/* PMC */
{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
{ "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
-@@ -2435,6 +2442,7 @@ static int spi_nor_init_params(struct sp
+@@ -2439,6 +2446,7 @@ static int spi_nor_init_params(struct sp
params->quad_enable = macronix_quad_enable;
break;
case SNOR_MFR_MICRON:
break;
-@@ -2753,7 +2761,8 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2757,7 +2765,8 @@ int spi_nor_scan(struct spi_nor *nor, co
mtd->_read = spi_nor_read;
/* NOR protection support for STmicro/Micron chips and similar */
static void quirk_no_pm_reset(struct pci_dev *dev)
{
/*
-@@ -4884,3 +4891,11 @@ static void quirk_no_ats(struct pci_dev
+@@ -4918,3 +4925,11 @@ static void quirk_no_ats(struct pci_dev
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_no_ats);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6900, quirk_no_ats);
#endif /* CONFIG_PCI_ATS */
L: keyrings@vger.kernel.org
--- a/drivers/tee/optee/Kconfig
+++ b/drivers/tee/optee/Kconfig
-@@ -5,3 +5,11 @@ config OPTEE
+@@ -6,3 +6,11 @@ config OPTEE
help
This implements the OP-TEE Trusted Execution Environment (TEE)
driver.
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1154,6 +1154,11 @@ static const struct flash_info spi_nor_i
+@@ -1159,6 +1159,11 @@ static const struct flash_info spi_nor_i
{ "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
{ "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
-@@ -836,6 +836,14 @@ config CMDLINE_FORCE
+@@ -837,6 +837,14 @@ config CMDLINE_FORCE
This is useful if you cannot or don't want to change the
command-line options your boot loader passes to the kernel.
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2667,6 +2667,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2671,6 +2671,7 @@ int spi_nor_scan(struct spi_nor *nor, co
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
-@@ -2742,7 +2743,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2746,7 +2747,12 @@ int spi_nor_scan(struct spi_nor *nor, co
spi_nor_wait_till_ready(nor);
}
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2737,6 +2737,18 @@ static const struct usb_device_id uvc_id
+@@ -2749,6 +2749,18 @@ static const struct usb_device_id uvc_id
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_FORCE_Y8 },
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
return ret;
-@@ -1177,7 +1229,7 @@ static const struct flash_info spi_nor_i
+@@ -1182,7 +1234,7 @@ static const struct flash_info spi_nor_i
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
-@@ -1241,6 +1293,9 @@ static int spi_nor_read(struct mtd_info
+@@ -1245,6 +1297,9 @@ static int spi_nor_read(struct mtd_info
if (ret)
return ret;
while (len) {
loff_t addr = from;
-@@ -1265,6 +1320,18 @@ static int spi_nor_read(struct mtd_info
+@@ -1269,6 +1324,18 @@ static int spi_nor_read(struct mtd_info
ret = 0;
read_err:
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
return ret;
}
-@@ -1366,6 +1433,10 @@ static int spi_nor_write(struct mtd_info
+@@ -1370,6 +1437,10 @@ static int spi_nor_write(struct mtd_info
if (ret)
return ret;
for (i = 0; i < len; ) {
ssize_t written;
loff_t addr = to + i;
-@@ -1406,6 +1477,7 @@ static int spi_nor_write(struct mtd_info
+@@ -1410,6 +1481,7 @@ static int spi_nor_write(struct mtd_info
}
write_err:
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
}
-@@ -2822,8 +2894,10 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2826,8 +2898,10 @@ int spi_nor_scan(struct spi_nor *nor, co
} else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
/*
* Write status register 1 byte
* Returns negative if error occurred.
-@@ -2894,9 +2903,16 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2898,9 +2907,16 @@ int spi_nor_scan(struct spi_nor *nor, co
} else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1061,6 +1061,11 @@ static const struct flash_info spi_nor_i
+@@ -1066,6 +1066,11 @@ static const struct flash_info spi_nor_i
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
},
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1098,6 +1098,7 @@ static const struct flash_info spi_nor_i
+@@ -1103,6 +1103,7 @@ static const struct flash_info spi_nor_i
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-@@ -1271,11 +1272,12 @@ static const struct flash_info spi_nor_i
+@@ -1275,11 +1276,12 @@ static const struct flash_info spi_nor_i
{ },
};
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
-@@ -1286,10 +1288,16 @@ static const struct flash_info *spi_nor_
+@@ -1290,10 +1292,16 @@ static const struct flash_info *spi_nor_
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
info = &spi_nor_ids[tmp];
if (info->id_len) {
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);
return ERR_PTR(-ENODEV);
-@@ -2769,7 +2777,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2773,7 +2781,7 @@ int spi_nor_scan(struct spi_nor *nor, co
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
if (!info)
if (IS_ERR_OR_NULL(info))
return -ENOENT;
-@@ -2780,7 +2788,7 @@ int spi_nor_scan(struct spi_nor *nor, co
+@@ -2784,7 +2792,7 @@ int spi_nor_scan(struct spi_nor *nor, co
if (name && info->id_len) {
const struct flash_info *jinfo;