--- /dev/null
+From 3784b6d64dc52ed3fbebad61a85ab9b7a687a167 Mon Sep 17 00:00:00 2001
+From: Robin Gong <b38343@freescale.com>
+Date: Thu, 25 Jul 2013 11:33:18 +0800
+Subject: [PATCH] regulator: pfuze100: add pfuze100 regulator driver
+
+Add pfuze100 regulator driver.
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ .../devicetree/bindings/regulator/pfuze100.txt | 113 +++++
+ drivers/regulator/Kconfig | 7 +
+ drivers/regulator/Makefile | 1 +
+ drivers/regulator/pfuze100-regulator.c | 454 +++++++++++++++++++++
+ include/linux/regulator/pfuze100.h | 44 ++
+ 5 files changed, 619 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/regulator/pfuze100.txt
+ create mode 100644 drivers/regulator/pfuze100-regulator.c
+ create mode 100644 include/linux/regulator/pfuze100.h
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
+@@ -0,0 +1,113 @@
++PFUZE100 family of regulators
++
++Required properties:
++- compatible: "fsl,pfuze100"
++- reg: I2C slave address
++- regulators: This is the list of child nodes that specify the regulator
++ initialization data for defined regulators. Please refer to below doc
++ Documentation/devicetree/bindings/regulator/regulator.txt.
++
++ The valid names for regulators are:
++ sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
++
++Each regulator is defined using the standard binding for regulators.
++
++Example:
++
++ pmic: pfuze100@08 {
++ compatible = "fsl,pfuze100";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1ab {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw1c_reg: sw1c {
++ regulator-min-microvolt = <300000>;
++ regulator-max-microvolt = <1875000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3a {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3b_reg: sw3b {
++ regulator-min-microvolt = <400000>;
++ regulator-max-microvolt = <1975000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw4_reg: sw4 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vgen1 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen2_reg: vgen2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vgen3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ };
++
++ vgen4_reg: vgen4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vgen5 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vgen6 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
+--- a/drivers/regulator/Kconfig
++++ b/drivers/regulator/Kconfig
+@@ -300,6 +300,13 @@ config REGULATOR_PCF50633
+ Say Y here to support the voltage regulators and convertors
+ on PCF50633
+
++config REGULATOR_PFUZE100
++ tristate "Support regulators on Freescale PFUZE100 PMIC"
++ depends on I2C
++ help
++ Say y here to support the regulators found on the Freescale PFUZE100
++ PMIC.
++
+ config REGULATOR_RC5T583
+ tristate "RICOH RC5T583 Power regulators"
+ depends on MFD_RC5T583
+--- a/drivers/regulator/Makefile
++++ b/drivers/regulator/Makefile
+@@ -45,6 +45,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc137
+ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
+ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+ obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
++obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
+ obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
+ obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
+ obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
+--- /dev/null
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -0,0 +1,454 @@
++/*
++ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/err.h>
++#include <linux/of.h>
++#include <linux/of_device.h>
++#include <linux/regulator/of_regulator.h>
++#include <linux/platform_device.h>
++#include <linux/regulator/driver.h>
++#include <linux/regulator/machine.h>
++#include <linux/regulator/pfuze100.h>
++#include <linux/i2c.h>
++#include <linux/slab.h>
++#include <linux/regmap.h>
++
++#define PFUZE_NUMREGS 128
++#define PFUZE100_VOL_OFFSET 0
++#define PFUZE100_STANDBY_OFFSET 1
++#define PFUZE100_MODE_OFFSET 3
++#define PFUZE100_CONF_OFFSET 4
++
++#define PFUZE100_DEVICEID 0x0
++#define PFUZE100_REVID 0x3
++#define PFUZE100_FABID 0x3
++
++#define PFUZE100_SW1ABVOL 0x20
++#define PFUZE100_SW1CVOL 0x2e
++#define PFUZE100_SW2VOL 0x35
++#define PFUZE100_SW3AVOL 0x3c
++#define PFUZE100_SW3BVOL 0x43
++#define PFUZE100_SW4VOL 0x4a
++#define PFUZE100_SWBSTCON1 0x66
++#define PFUZE100_VREFDDRCON 0x6a
++#define PFUZE100_VSNVSVOL 0x6b
++#define PFUZE100_VGEN1VOL 0x6c
++#define PFUZE100_VGEN2VOL 0x6d
++#define PFUZE100_VGEN3VOL 0x6e
++#define PFUZE100_VGEN4VOL 0x6f
++#define PFUZE100_VGEN5VOL 0x70
++#define PFUZE100_VGEN6VOL 0x71
++
++struct pfuze_regulator {
++ struct regulator_desc desc;
++ unsigned char stby_reg;
++ unsigned char stby_mask;
++};
++
++struct pfuze_chip {
++ struct regmap *regmap;
++ struct device *dev;
++ struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
++ struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
++};
++
++static const int pfuze100_swbst[] = {
++ 5000000, 5050000, 5100000, 5150000,
++};
++
++static const int pfuze100_vsnvs[] = {
++ 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
++};
++
++static const struct i2c_device_id pfuze_device_id[] = {
++ {.name = "pfuze100"},
++ {},
++};
++MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
++
++static const struct of_device_id pfuze_dt_ids[] = {
++ { .compatible = "fsl,pfuze100" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
++
++static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
++{
++ struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
++ int id = rdev->desc->id;
++ unsigned int val, ramp_bits, reg;
++ int ret;
++
++ if (id < PFUZE100_SWBST) {
++ if (id == PFUZE100_SW1AB)
++ reg = PFUZE100_SW1ABVOL;
++ else
++ reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
++ regmap_read(pfuze100->regmap, reg, &val);
++
++ if (id <= PFUZE100_SW1C)
++ ramp_delay = 25000 / (2 * ramp_delay);
++ else if (val & 0x40)
++ ramp_delay = 50000 / (4 * ramp_delay);
++ else
++ ramp_delay = 25000 / (2 * ramp_delay);
++
++ ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
++ ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
++ ramp_bits << 6);
++ if (ret < 0)
++ dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
++ } else
++ ret = -EACCES;
++
++ return ret;
++}
++
++static struct regulator_ops pfuze100_ldo_regulator_ops = {
++ .enable = regulator_enable_regmap,
++ .disable = regulator_disable_regmap,
++ .is_enabled = regulator_is_enabled_regmap,
++ .list_voltage = regulator_list_voltage_linear,
++ .set_voltage_sel = regulator_set_voltage_sel_regmap,
++ .get_voltage_sel = regulator_get_voltage_sel_regmap,
++};
++
++static struct regulator_ops pfuze100_fixed_regulator_ops = {
++ .list_voltage = regulator_list_voltage_linear,
++};
++
++static struct regulator_ops pfuze100_sw_regulator_ops = {
++ .list_voltage = regulator_list_voltage_linear,
++ .set_voltage_sel = regulator_set_voltage_sel_regmap,
++ .get_voltage_sel = regulator_get_voltage_sel_regmap,
++ .set_voltage_time_sel = regulator_set_voltage_time_sel,
++ .set_ramp_delay = pfuze100_set_ramp_delay,
++};
++
++static struct regulator_ops pfuze100_swb_regulator_ops = {
++ .list_voltage = regulator_list_voltage_table,
++ .set_voltage_sel = regulator_set_voltage_sel_regmap,
++ .get_voltage_sel = regulator_get_voltage_sel_regmap,
++
++};
++
++#define PFUZE100_FIXED_REG(_name, base, voltage) \
++ [PFUZE100_ ## _name] = { \
++ .desc = { \
++ .name = #_name, \
++ .n_voltages = 1, \
++ .ops = &pfuze100_fixed_regulator_ops, \
++ .type = REGULATOR_VOLTAGE, \
++ .id = PFUZE100_ ## _name, \
++ .owner = THIS_MODULE, \
++ .min_uV = (voltage), \
++ .enable_reg = (base), \
++ .enable_mask = 0x10, \
++ }, \
++ }
++
++#define PFUZE100_SW_REG(_name, base, min, max, step) \
++ [PFUZE100_ ## _name] = { \
++ .desc = { \
++ .name = #_name,\
++ .n_voltages = ((max) - (min)) / (step) + 1, \
++ .ops = &pfuze100_sw_regulator_ops, \
++ .type = REGULATOR_VOLTAGE, \
++ .id = PFUZE100_ ## _name, \
++ .owner = THIS_MODULE, \
++ .min_uV = (min), \
++ .uV_step = (step), \
++ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
++ .vsel_mask = 0x3f, \
++ }, \
++ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
++ .stby_mask = 0x3f, \
++ }
++
++#define PFUZE100_SWB_REG(_name, base, mask, voltages) \
++ [PFUZE100_ ## _name] = { \
++ .desc = { \
++ .name = #_name, \
++ .n_voltages = ARRAY_SIZE(voltages), \
++ .ops = &pfuze100_swb_regulator_ops, \
++ .type = REGULATOR_VOLTAGE, \
++ .id = PFUZE100_ ## _name, \
++ .owner = THIS_MODULE, \
++ .volt_table = voltages, \
++ .vsel_reg = (base), \
++ .vsel_mask = (mask), \
++ }, \
++ }
++
++#define PFUZE100_VGEN_REG(_name, base, min, max, step) \
++ [PFUZE100_ ## _name] = { \
++ .desc = { \
++ .name = #_name, \
++ .n_voltages = ((max) - (min)) / (step) + 1, \
++ .ops = &pfuze100_ldo_regulator_ops, \
++ .type = REGULATOR_VOLTAGE, \
++ .id = PFUZE100_ ## _name, \
++ .owner = THIS_MODULE, \
++ .min_uV = (min), \
++ .uV_step = (step), \
++ .vsel_reg = (base), \
++ .vsel_mask = 0xf, \
++ .enable_reg = (base), \
++ .enable_mask = 0x10, \
++ }, \
++ .stby_reg = (base), \
++ .stby_mask = 0x20, \
++ }
++
++static struct pfuze_regulator pfuze100_regulators[] = {
++ PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
++ PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
++ PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
++ PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
++ PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
++ PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
++ PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
++ PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
++ PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000),
++ PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
++ PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
++ PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
++ PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
++};
++
++#ifdef CONFIG_OF
++static struct of_regulator_match pfuze100_matches[] = {
++ { .name = "sw1ab", },
++ { .name = "sw1c", },
++ { .name = "sw2", },
++ { .name = "sw3a", },
++ { .name = "sw3b", },
++ { .name = "sw4", },
++ { .name = "swbst", },
++ { .name = "vsnvs", },
++ { .name = "vrefddr", },
++ { .name = "vgen1", },
++ { .name = "vgen2", },
++ { .name = "vgen3", },
++ { .name = "vgen4", },
++ { .name = "vgen5", },
++ { .name = "vgen6", },
++};
++
++static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
++{
++ struct device *dev = chip->dev;
++ struct device_node *np, *parent;
++ int ret;
++
++ np = of_node_get(dev->parent->of_node);
++ if (!np)
++ return 0;
++
++ parent = of_find_node_by_name(np, "regulators");
++ if (!parent) {
++ dev_err(dev, "regulators node not found\n");
++ return -EINVAL;
++ }
++
++ ret = of_regulator_match(dev, parent, pfuze100_matches,
++ ARRAY_SIZE(pfuze100_matches));
++
++ of_node_put(parent);
++ if (ret < 0) {
++ dev_err(dev, "Error parsing regulator init data: %d\n",
++ ret);
++ return ret;
++ }
++
++ return 0;
++}
++
++static inline struct regulator_init_data *match_init_data(int index)
++{
++ return pfuze100_matches[index].init_data;
++}
++
++static inline struct device_node *match_of_node(int index)
++{
++ return pfuze100_matches[index].of_node;
++}
++#else
++static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
++{
++ return NULL;
++}
++
++static inline struct regulator_init_data *match_init_data(int index)
++{
++ return NULL;
++}
++
++static inline struct device_node *match_of_node(int index)
++{
++ return NULL;
++}
++#endif
++
++static int pfuze_identify(struct pfuze_chip *pfuze_chip)
++{
++ unsigned int value;
++ int ret;
++
++ ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value);
++ if (ret)
++ return ret;
++
++ if (value & 0x0f) {
++ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
++ return -ENODEV;
++ }
++
++ ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
++ if (ret)
++ return ret;
++ dev_info(pfuze_chip->dev,
++ "Full lay: %x, Metal lay: %x\n",
++ (value & 0xf0) >> 4, value & 0x0f);
++
++ ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
++ if (ret)
++ return ret;
++ dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n",
++ (value & 0xc) >> 2, value & 0x3);
++
++ return 0;
++}
++
++static const struct regmap_config pfuze_regmap_config = {
++ .reg_bits = 8,
++ .val_bits = 8,
++ .max_register = PFUZE_NUMREGS,
++ .cache_type = REGCACHE_RBTREE,
++};
++
++static int pfuze100_regulator_probe(struct i2c_client *client,
++ const struct i2c_device_id *id)
++{
++ struct pfuze_chip *pfuze_chip;
++ struct pfuze_regulator_platform_data *pdata =
++ dev_get_platdata(&client->dev);
++ struct regulator_config config = { };
++ int i, ret;
++
++ pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
++ GFP_KERNEL);
++ if (!pfuze_chip)
++ return -ENOMEM;
++
++ dev_set_drvdata(&client->dev, pfuze_chip);
++
++ memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
++ sizeof(pfuze_chip->regulator_descs));
++
++ pfuze_chip->dev = &client->dev;
++
++ pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
++ if (IS_ERR(pfuze_chip->regmap)) {
++ ret = PTR_ERR(pfuze_chip->regmap);
++ dev_err(&client->dev,
++ "regmap allocation failed with err %d\n", ret);
++ return ret;
++ }
++
++ ret = pfuze_identify(pfuze_chip);
++ if (ret) {
++ dev_err(&client->dev, "unrecognized pfuze chip ID!\n");
++ return ret;
++ }
++
++ ret = pfuze_parse_regulators_dt(pfuze_chip);
++ if (ret)
++ return ret;
++
++ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
++ struct regulator_init_data *init_data;
++ int val;
++
++ if (pdata)
++ init_data = pdata->init_data[i];
++ else
++ init_data = match_init_data(i);
++
++ /* SW2~SW4 high bit check and modify the voltage value table */
++ if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
++ regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
++ (i - PFUZE100_SW2) * 7, &val);
++ if (val & 0x40) {
++ pfuze_chip->regulator_descs[i].desc.min_uV
++ = 800000;
++ pfuze_chip->regulator_descs[i].desc.uV_step
++ = 50000;
++ }
++ }
++
++ config.dev = &client->dev;
++ config.init_data = init_data;
++ config.driver_data = pfuze_chip;
++ config.of_node = match_of_node(i);
++
++ pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
++ ->regulator_descs[i].desc, &config);
++ if (IS_ERR(pfuze_chip->regulators[i])) {
++ dev_err(&client->dev, "register regulator%s failed\n",
++ pfuze100_regulators[i].desc.name);
++ ret = PTR_ERR(pfuze_chip->regulators[i]);
++ while (--i >= 0)
++ regulator_unregister(pfuze_chip->regulators[i]);
++ return ret;
++ }
++ }
++
++ return 0;
++}
++
++static int pfuze100_regulator_remove(struct i2c_client *client)
++{
++ int i;
++ struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
++
++ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
++ regulator_unregister(pfuze_chip->regulators[i]);
++
++ return 0;
++}
++
++static struct i2c_driver pfuze_driver = {
++ .id_table = pfuze_device_id,
++ .driver = {
++ .name = "pfuze100-regulator",
++ .owner = THIS_MODULE,
++ .of_match_table = pfuze_dt_ids,
++ },
++ .probe = pfuze100_regulator_probe,
++ .remove = pfuze100_regulator_remove,
++};
++module_i2c_driver(pfuze_driver);
++
++MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
++MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
++MODULE_ALIAS("pfuze100-regulator");
+--- /dev/null
++++ b/include/linux/regulator/pfuze100.h
+@@ -0,0 +1,44 @@
++/*
++ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++#ifndef __LINUX_REG_PFUZE100_H
++#define __LINUX_REG_PFUZE100_H
++
++#define PFUZE100_SW1AB 0
++#define PFUZE100_SW1C 1
++#define PFUZE100_SW2 2
++#define PFUZE100_SW3A 3
++#define PFUZE100_SW3B 4
++#define PFUZE100_SW4 5
++#define PFUZE100_SWBST 6
++#define PFUZE100_VSNVS 7
++#define PFUZE100_VREFDDR 8
++#define PFUZE100_VGEN1 9
++#define PFUZE100_VGEN2 10
++#define PFUZE100_VGEN3 11
++#define PFUZE100_VGEN4 12
++#define PFUZE100_VGEN5 13
++#define PFUZE100_VGEN6 14
++#define PFUZE100_MAX_REGULATOR 15
++
++struct regulator_init_data;
++
++struct pfuze_regulator_platform_data {
++ struct regulator_init_data *init_data[PFUZE100_MAX_REGULATOR];
++};
++
++#endif /* __LINUX_REG_PFUZE100_H */
+++ /dev/null
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -300,6 +300,14 @@ config REGULATOR_PCF50633
- Say Y here to support the voltage regulators and convertors
- on PCF50633
-
-+config REGULATOR_PFUZE100
-+ tristate "Support regulators on Freescale PFUZE100 PMIC"
-+ depends on I2C
-+ select REGMAP_I2C
-+ help
-+ Say y here to support the regulators found on the Freescale PFUZE100
-+ PMIC.
-+
- config REGULATOR_RC5T583
- tristate "RICOH RC5T583 Power regulators"
- depends on MFD_RC5T583
---- a/drivers/regulator/Makefile
-+++ b/drivers/regulator/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc137
- obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
- obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
- obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
-+obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
- obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
- obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
- obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
---- /dev/null
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -0,0 +1,445 @@
-+/*
-+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/regulator/of_regulator.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/driver.h>
-+#include <linux/regulator/machine.h>
-+#include <linux/regulator/pfuze100.h>
-+#include <linux/i2c.h>
-+#include <linux/slab.h>
-+#include <linux/regmap.h>
-+
-+#define PFUZE_NUMREGS 128
-+#define PFUZE100_VOL_OFFSET 0
-+#define PFUZE100_STANDBY_OFFSET 1
-+#define PFUZE100_MODE_OFFSET 3
-+#define PFUZE100_CONF_OFFSET 4
-+
-+#define PFUZE100_DEVICEID 0x0
-+#define PFUZE100_REVID 0x3
-+#define PFUZE100_FABID 0x3
-+
-+#define PFUZE100_SW1ABVOL 0x20
-+#define PFUZE100_SW1CVOL 0x2e
-+#define PFUZE100_SW2VOL 0x35
-+#define PFUZE100_SW3AVOL 0x3c
-+#define PFUZE100_SW3BVOL 0x43
-+#define PFUZE100_SW4VOL 0x4a
-+#define PFUZE100_SWBSTCON1 0x66
-+#define PFUZE100_VREFDDRCON 0x6a
-+#define PFUZE100_VSNVSVOL 0x6b
-+#define PFUZE100_VGEN1VOL 0x6c
-+#define PFUZE100_VGEN2VOL 0x6d
-+#define PFUZE100_VGEN3VOL 0x6e
-+#define PFUZE100_VGEN4VOL 0x6f
-+#define PFUZE100_VGEN5VOL 0x70
-+#define PFUZE100_VGEN6VOL 0x71
-+
-+struct pfuze_regulator {
-+ struct regulator_desc desc;
-+ unsigned char stby_reg;
-+ unsigned char stby_mask;
-+};
-+
-+struct pfuze_chip {
-+ struct regmap *regmap;
-+ struct device *dev;
-+ struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
-+ struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
-+};
-+
-+static const int pfuze100_swbst[] = {
-+ 5000000, 5050000, 5100000, 5150000,
-+};
-+
-+static const int pfuze100_vsnvs[] = {
-+ 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
-+};
-+
-+static const struct i2c_device_id pfuze_device_id[] = {
-+ {.name = "pfuze100"},
-+ {},
-+};
-+MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
-+
-+static const struct of_device_id pfuze_dt_ids[] = {
-+ { .compatible = "fsl,pfuze100" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
-+
-+static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-+{
-+ struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
-+ int id = rdev->desc->id;
-+ unsigned int ramp_bits;
-+ int ret;
-+
-+ if (id < PFUZE100_SWBST) {
-+ ramp_delay = 12500 / ramp_delay;
-+ ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
-+ ret = regmap_update_bits(pfuze100->regmap,
-+ rdev->desc->vsel_reg + 4,
-+ 0xc0, ramp_bits << 6);
-+ if (ret < 0)
-+ dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
-+ } else
-+ ret = -EACCES;
-+
-+ return ret;
-+}
-+
-+static struct regulator_ops pfuze100_ldo_regulator_ops = {
-+ .enable = regulator_enable_regmap,
-+ .disable = regulator_disable_regmap,
-+ .is_enabled = regulator_is_enabled_regmap,
-+ .list_voltage = regulator_list_voltage_linear,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+};
-+
-+static struct regulator_ops pfuze100_fixed_regulator_ops = {
-+ .list_voltage = regulator_list_voltage_linear,
-+};
-+
-+static struct regulator_ops pfuze100_sw_regulator_ops = {
-+ .list_voltage = regulator_list_voltage_linear,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
-+ .set_ramp_delay = pfuze100_set_ramp_delay,
-+};
-+
-+static struct regulator_ops pfuze100_swb_regulator_ops = {
-+ .list_voltage = regulator_list_voltage_table,
-+ .map_voltage = regulator_map_voltage_ascend,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+
-+};
-+
-+#define PFUZE100_FIXED_REG(_name, base, voltage) \
-+ [PFUZE100_ ## _name] = { \
-+ .desc = { \
-+ .name = #_name, \
-+ .n_voltages = 1, \
-+ .ops = &pfuze100_fixed_regulator_ops, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = PFUZE100_ ## _name, \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (voltage), \
-+ .enable_reg = (base), \
-+ .enable_mask = 0x10, \
-+ }, \
-+ }
-+
-+#define PFUZE100_SW_REG(_name, base, min, max, step) \
-+ [PFUZE100_ ## _name] = { \
-+ .desc = { \
-+ .name = #_name,\
-+ .n_voltages = ((max) - (min)) / (step) + 1, \
-+ .ops = &pfuze100_sw_regulator_ops, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = PFUZE100_ ## _name, \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (min), \
-+ .uV_step = (step), \
-+ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
-+ .vsel_mask = 0x3f, \
-+ }, \
-+ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
-+ .stby_mask = 0x3f, \
-+ }
-+
-+#define PFUZE100_SWB_REG(_name, base, mask, voltages) \
-+ [PFUZE100_ ## _name] = { \
-+ .desc = { \
-+ .name = #_name, \
-+ .n_voltages = ARRAY_SIZE(voltages), \
-+ .ops = &pfuze100_swb_regulator_ops, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = PFUZE100_ ## _name, \
-+ .owner = THIS_MODULE, \
-+ .volt_table = voltages, \
-+ .vsel_reg = (base), \
-+ .vsel_mask = (mask), \
-+ }, \
-+ }
-+
-+#define PFUZE100_VGEN_REG(_name, base, min, max, step) \
-+ [PFUZE100_ ## _name] = { \
-+ .desc = { \
-+ .name = #_name, \
-+ .n_voltages = ((max) - (min)) / (step) + 1, \
-+ .ops = &pfuze100_ldo_regulator_ops, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = PFUZE100_ ## _name, \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (min), \
-+ .uV_step = (step), \
-+ .vsel_reg = (base), \
-+ .vsel_mask = 0xf, \
-+ .enable_reg = (base), \
-+ .enable_mask = 0x10, \
-+ }, \
-+ .stby_reg = (base), \
-+ .stby_mask = 0x20, \
-+ }
-+
-+static struct pfuze_regulator pfuze100_regulators[] = {
-+ PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
-+ PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
-+ PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
-+ PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
-+ PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
-+ PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000),
-+ PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
-+ PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
-+ PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
-+};
-+
-+#ifdef CONFIG_OF
-+static struct of_regulator_match pfuze100_matches[] = {
-+ { .name = "sw1ab", },
-+ { .name = "sw1c", },
-+ { .name = "sw2", },
-+ { .name = "sw3a", },
-+ { .name = "sw3b", },
-+ { .name = "sw4", },
-+ { .name = "swbst", },
-+ { .name = "vsnvs", },
-+ { .name = "vrefddr", },
-+ { .name = "vgen1", },
-+ { .name = "vgen2", },
-+ { .name = "vgen3", },
-+ { .name = "vgen4", },
-+ { .name = "vgen5", },
-+ { .name = "vgen6", },
-+};
-+
-+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
-+{
-+ struct device *dev = chip->dev;
-+ struct device_node *np, *parent;
-+ int ret;
-+
-+ np = of_node_get(dev->parent->of_node);
-+ if (!np)
-+ return 0;
-+
-+ parent = of_find_node_by_name(np, "regulators");
-+ if (!parent) {
-+ dev_err(dev, "regulators node not found\n");
-+ return -EINVAL;
-+ }
-+
-+ ret = of_regulator_match(dev, parent, pfuze100_matches,
-+ ARRAY_SIZE(pfuze100_matches));
-+
-+ of_node_put(parent);
-+ if (ret < 0) {
-+ dev_err(dev, "Error parsing regulator init data: %d\n",
-+ ret);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline struct regulator_init_data *match_init_data(int index)
-+{
-+ return pfuze100_matches[index].init_data;
-+}
-+
-+static inline struct device_node *match_of_node(int index)
-+{
-+ return pfuze100_matches[index].of_node;
-+}
-+#else
-+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
-+{
-+ return 0;
-+}
-+
-+static inline struct regulator_init_data *match_init_data(int index)
-+{
-+ return NULL;
-+}
-+
-+static inline struct device_node *match_of_node(int index)
-+{
-+ return NULL;
-+}
-+#endif
-+
-+static int pfuze_identify(struct pfuze_chip *pfuze_chip)
-+{
-+ unsigned int value;
-+ int ret;
-+
-+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value);
-+ if (ret)
-+ return ret;
-+
-+ if (value & 0x0f) {
-+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-+ return -ENODEV;
-+ }
-+
-+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
-+ if (ret)
-+ return ret;
-+ dev_info(pfuze_chip->dev,
-+ "Full lay: %x, Metal lay: %x\n",
-+ (value & 0xf0) >> 4, value & 0x0f);
-+
-+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
-+ if (ret)
-+ return ret;
-+ dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n",
-+ (value & 0xc) >> 2, value & 0x3);
-+
-+ return 0;
-+}
-+
-+static const struct regmap_config pfuze_regmap_config = {
-+ .reg_bits = 8,
-+ .val_bits = 8,
-+ .max_register = PFUZE_NUMREGS - 1,
-+ .cache_type = REGCACHE_RBTREE,
-+};
-+
-+static int pfuze100_regulator_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct pfuze_chip *pfuze_chip;
-+ struct pfuze_regulator_platform_data *pdata =
-+ dev_get_platdata(&client->dev);
-+ struct regulator_config config = { };
-+ int i, ret;
-+
-+ pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
-+ GFP_KERNEL);
-+ if (!pfuze_chip)
-+ return -ENOMEM;
-+
-+ i2c_set_clientdata(client, pfuze_chip);
-+
-+ memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
-+ sizeof(pfuze_chip->regulator_descs));
-+
-+ pfuze_chip->dev = &client->dev;
-+
-+ pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
-+ if (IS_ERR(pfuze_chip->regmap)) {
-+ ret = PTR_ERR(pfuze_chip->regmap);
-+ dev_err(&client->dev,
-+ "regmap allocation failed with err %d\n", ret);
-+ return ret;
-+ }
-+
-+ ret = pfuze_identify(pfuze_chip);
-+ if (ret) {
-+ dev_err(&client->dev, "unrecognized pfuze chip ID!\n");
-+ return ret;
-+ }
-+
-+ ret = pfuze_parse_regulators_dt(pfuze_chip);
-+ if (ret)
-+ return ret;
-+
-+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
-+ struct regulator_init_data *init_data;
-+ struct regulator_desc *desc;
-+ int val;
-+
-+ desc = &pfuze_chip->regulator_descs[i].desc;
-+
-+ if (pdata)
-+ init_data = pdata->init_data[i];
-+ else
-+ init_data = match_init_data(i);
-+
-+ /* SW2~SW4 high bit check and modify the voltage value table */
-+ if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
-+ regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
-+ if (val & 0x40) {
-+ desc->min_uV = 800000;
-+ desc->uV_step = 50000;
-+ desc->n_voltages = 51;
-+ }
-+ }
-+
-+ config.dev = &client->dev;
-+ config.init_data = init_data;
-+ config.driver_data = pfuze_chip;
-+ config.of_node = match_of_node(i);
-+
-+ pfuze_chip->regulators[i] = regulator_register(desc, &config);
-+ if (IS_ERR(pfuze_chip->regulators[i])) {
-+ dev_err(&client->dev, "register regulator%s failed\n",
-+ pfuze100_regulators[i].desc.name);
-+ ret = PTR_ERR(pfuze_chip->regulators[i]);
-+ while (--i >= 0)
-+ regulator_unregister(pfuze_chip->regulators[i]);
-+ return ret;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int pfuze100_regulator_remove(struct i2c_client *client)
-+{
-+ int i;
-+ struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
-+
-+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
-+ regulator_unregister(pfuze_chip->regulators[i]);
-+
-+ return 0;
-+}
-+
-+static struct i2c_driver pfuze_driver = {
-+ .id_table = pfuze_device_id,
-+ .driver = {
-+ .name = "pfuze100-regulator",
-+ .owner = THIS_MODULE,
-+ .of_match_table = pfuze_dt_ids,
-+ },
-+ .probe = pfuze100_regulator_probe,
-+ .remove = pfuze100_regulator_remove,
-+};
-+module_i2c_driver(pfuze_driver);
-+
-+MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
-+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("i2c:pfuze100-regulator");
---- /dev/null
-+++ b/include/linux/regulator/pfuze100.h
-@@ -0,0 +1,44 @@
-+/*
-+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+#ifndef __LINUX_REG_PFUZE100_H
-+#define __LINUX_REG_PFUZE100_H
-+
-+#define PFUZE100_SW1AB 0
-+#define PFUZE100_SW1C 1
-+#define PFUZE100_SW2 2
-+#define PFUZE100_SW3A 3
-+#define PFUZE100_SW3B 4
-+#define PFUZE100_SW4 5
-+#define PFUZE100_SWBST 6
-+#define PFUZE100_VSNVS 7
-+#define PFUZE100_VREFDDR 8
-+#define PFUZE100_VGEN1 9
-+#define PFUZE100_VGEN2 10
-+#define PFUZE100_VGEN3 11
-+#define PFUZE100_VGEN4 12
-+#define PFUZE100_VGEN5 13
-+#define PFUZE100_VGEN6 14
-+#define PFUZE100_MAX_REGULATOR 15
-+
-+struct regulator_init_data;
-+
-+struct pfuze_regulator_platform_data {
-+ struct regulator_init_data *init_data[PFUZE100_MAX_REGULATOR];
-+};
-+
-+#endif /* __LINUX_REG_PFUZE100_H */
--- /dev/null
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: REGULATOR_PFUZE100 needs to select
+ REGMAP_I2C
+
+This fixes below build errors:
+
+ CC [M] drivers/regulator/pfuze100-regulator.o
+drivers/regulator/pfuze100-regulator.c:342:21: error: variable 'pfuze_regmap_config' has initializer but incomplete type
+drivers/regulator/pfuze100-regulator.c:343:2: error: unknown field 'reg_bits' specified in initializer
+drivers/regulator/pfuze100-regulator.c:343:2: warning: excess elements in struct initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:343:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
+drivers/regulator/pfuze100-regulator.c:344:2: error: unknown field 'val_bits' specified in initializer
+drivers/regulator/pfuze100-regulator.c:344:2: warning: excess elements in struct initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:344:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
+drivers/regulator/pfuze100-regulator.c:345:2: error: unknown field 'max_register' specified in initializer
+drivers/regulator/pfuze100-regulator.c:345:2: warning: excess elements in struct initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:345:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
+drivers/regulator/pfuze100-regulator.c:346:2: error: unknown field 'cache_type' specified in initializer
+drivers/regulator/pfuze100-regulator.c:346:2: warning: excess elements in struct initializer [enabled by default]
+drivers/regulator/pfuze100-regulator.c:346:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
+drivers/regulator/pfuze100-regulator.c: In function 'pfuze100_regulator_probe':
+drivers/regulator/pfuze100-regulator.c:370:2: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
+drivers/regulator/pfuze100-regulator.c:370:21: warning: assignment makes pointer from integer without a cast [enabled by default]
+cc1: some warnings being treated as errors
+make[2]: *** [drivers/regulator/pfuze100-regulator.o] Error 1
+make[1]: *** [drivers/regulator] Error 2
+make: *** [drivers] Error 2
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/regulator/Kconfig
++++ b/drivers/regulator/Kconfig
+@@ -303,6 +303,7 @@ config REGULATOR_PCF50633
+ config REGULATOR_PFUZE100
+ tristate "Support regulators on Freescale PFUZE100 PMIC"
+ depends on I2C
++ select REGMAP_I2C
+ help
+ Say y here to support the regulators found on the Freescale PFUZE100
+ PMIC.
+++ /dev/null
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -308,9 +308,14 @@ static int pfuze_identify(struct pfuze_c
- if (ret)
- return ret;
-
-- if (value & 0x0f) {
-- dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-- return -ENODEV;
-+ switch (value & 0xf) {
-+ case 0x0:
-+ /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
-+ case 0x8:
-+ break;
-+ default:
-+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-+ return -ENODEV;
- }
-
- ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
--- /dev/null
+From: Robin Gong <b38343@freescale.com>
+Subject: [PATCH] regulator:pfuze100: fix build warning and correct the binding
+ doc
+
+fix building warning and correct the binding doc
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ Documentation/devicetree/bindings/regulator/pfuze100.txt | 2 ++
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
++++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
+@@ -3,6 +3,8 @@ PFUZE100 family of regulators
+ Required properties:
+ - compatible: "fsl,pfuze100"
+ - reg: I2C slave address
++
++Required child node:
+ - regulators: This is the list of child nodes that specify the regulator
+ initialization data for defined regulators. Please refer to below doc
+ Documentation/devicetree/bindings/regulator/regulator.txt.
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -295,7 +295,7 @@ static inline struct device_node *match_
+ #else
+ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
+ {
+- return NULL;
++ return 0;
+ }
+
+ static inline struct regulator_init_data *match_init_data(int index)
--- /dev/null
+From: Robin Gong <b38343@freescale.com>
+Subject: [PATCH] regulator: pfuze100: add MODULE_LICENSE() in pfuze100 driver
+
+Fix building error on x86_64 and i386:
+WARNING: modpost: missing MODULE_LICENSE() in
+drivers/regulator/pfuze100-regulator.o
+
+Signed-off-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -451,4 +451,5 @@ module_i2c_driver(pfuze_driver);
+
+ MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
+ MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
++MODULE_LICENSE("GPL v2");
+ MODULE_ALIAS("pfuze100-regulator");
--- /dev/null
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Use i2c_[set|get]_clientdata
+
+Since this is a i2c driver, use i2c_[set|get]_clientdata instead of
+dev_[set|get]_drvdata.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -360,7 +360,7 @@ static int pfuze100_regulator_probe(stru
+ if (!pfuze_chip)
+ return -ENOMEM;
+
+- dev_set_drvdata(&client->dev, pfuze_chip);
++ i2c_set_clientdata(client, pfuze_chip);
+
+ memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
+ sizeof(pfuze_chip->regulator_descs));
+@@ -429,7 +429,7 @@ static int pfuze100_regulator_probe(stru
+ static int pfuze100_regulator_remove(struct i2c_client *client)
+ {
+ int i;
+- struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
++ struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
+
+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
+ regulator_unregister(pfuze_chip->regulators[i]);
--- /dev/null
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Fix module alias prefix
+
+i2c drivers use "i2c:" prefix for module alias.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -452,4 +452,4 @@ module_i2c_driver(pfuze_driver);
+ MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
+ MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
+ MODULE_LICENSE("GPL v2");
+-MODULE_ALIAS("pfuze100-regulator");
++MODULE_ALIAS("i2c:pfuze100-regulator");
--- /dev/null
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Use regulator_map_voltage_ascend
+
+All table based voltage list have ascendant order.
+Use regulator_map_voltage_ascend for them.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -144,6 +144,7 @@ static struct regulator_ops pfuze100_sw_
+
+ static struct regulator_ops pfuze100_swb_regulator_ops = {
+ .list_voltage = regulator_list_voltage_table,
++ .map_voltage = regulator_map_voltage_ascend,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+
--- /dev/null
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with
+ high bit set
+
+Current code adjust min_uV and uV_step but missed adjusting the n_voltages
+setting.
+
+When BIT6 is clear:
+ n_voltages = (1975000 - 400000) / 25000 + 1 = 64
+When BIT6 is set:
+ n_voltages = (3300000 - 800000) / 50000 + 1 = 51
+
+The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved.
+When using regulator_list_voltage_linear, the n_voltages does matter here
+because wrong n_voltages setting make the equation return wrong result.
+e.g. if selector is 63, regulator_list_voltage_linear returns
+ 800000 + (50000 * 63) = 4000000
+ It should return -EINVAL if the selector is in the range of 51 ~ 63.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -388,8 +388,11 @@ static int pfuze100_regulator_probe(stru
+
+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
+ struct regulator_init_data *init_data;
++ struct regulator_desc *desc;
+ int val;
+
++ desc = &pfuze_chip->regulator_descs[i].desc;
++
+ if (pdata)
+ init_data = pdata->init_data[i];
+ else
+@@ -397,13 +400,11 @@ static int pfuze100_regulator_probe(stru
+
+ /* SW2~SW4 high bit check and modify the voltage value table */
+ if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
+- regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
+- (i - PFUZE100_SW2) * 7, &val);
++ regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
+ if (val & 0x40) {
+- pfuze_chip->regulator_descs[i].desc.min_uV
+- = 800000;
+- pfuze_chip->regulator_descs[i].desc.uV_step
+- = 50000;
++ desc->min_uV = 800000;
++ desc->uV_step = 50000;
++ desc->n_voltages = 51;
+ }
+ }
+
+@@ -412,8 +413,7 @@ static int pfuze100_regulator_probe(stru
+ config.driver_data = pfuze_chip;
+ config.of_node = match_of_node(i);
+
+- pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
+- ->regulator_descs[i].desc, &config);
++ pfuze_chip->regulators[i] = regulator_register(desc, &config);
+ if (IS_ERR(pfuze_chip->regulators[i])) {
+ dev_err(&client->dev, "register regulator%s failed\n",
+ pfuze100_regulators[i].desc.name);
--- /dev/null
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Simplify pfuze100_set_ramp_delay
+ implementation
+
+Simplify the equation to calculate ramp_delay.
+Below equations are equivalent:
+ ramp_delay = 25000 / (2 * ramp_delay);
+ ramp_delay = 50000 / (4 * ramp_delay);
+ ramp_delay = 25000 / (2 * ramp_delay);
+ ramp_delay = 12500 / ramp_delay;
+So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different
+equations.
+
+Also use rdev->desc->vsel_reg instead of run-time calculate register address.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Reviewed-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 21 +++++----------------
+ 1 file changed, 5 insertions(+), 16 deletions(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -93,26 +93,15 @@ static int pfuze100_set_ramp_delay(struc
+ {
+ struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
+ int id = rdev->desc->id;
+- unsigned int val, ramp_bits, reg;
++ unsigned int ramp_bits;
+ int ret;
+
+ if (id < PFUZE100_SWBST) {
+- if (id == PFUZE100_SW1AB)
+- reg = PFUZE100_SW1ABVOL;
+- else
+- reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
+- regmap_read(pfuze100->regmap, reg, &val);
+-
+- if (id <= PFUZE100_SW1C)
+- ramp_delay = 25000 / (2 * ramp_delay);
+- else if (val & 0x40)
+- ramp_delay = 50000 / (4 * ramp_delay);
+- else
+- ramp_delay = 25000 / (2 * ramp_delay);
+-
++ ramp_delay = 12500 / ramp_delay;
+ ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
+- ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
+- ramp_bits << 6);
++ ret = regmap_update_bits(pfuze100->regmap,
++ rdev->desc->vsel_reg + 4,
++ 0xc0, ramp_bits << 6);
+ if (ret < 0)
+ dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
+ } else
--- /dev/null
+From: Axel Lin <axel.lin@ingics.com>
+Subject: [PATCH] regulator: pfuze100: Fix off-by-one for max_register setting
+
+max_register should be register count - 1.
+
+Signed-off-by: Axel Lin <axel.lin@ingics.com>
+Reviewed-by: Robin Gong <b38343@freescale.com>
+Signed-off-by: Mark Brown <broonie@linaro.org>
+---
+ drivers/regulator/pfuze100-regulator.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -332,7 +332,7 @@ static int pfuze_identify(struct pfuze_c
+ static const struct regmap_config pfuze_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+- .max_register = PFUZE_NUMREGS,
++ .max_register = PFUZE_NUMREGS - 1,
+ .cache_type = REGCACHE_RBTREE,
+ };
+
--- /dev/null
+--- a/drivers/regulator/pfuze100-regulator.c
++++ b/drivers/regulator/pfuze100-regulator.c
+@@ -308,9 +308,14 @@ static int pfuze_identify(struct pfuze_c
+ if (ret)
+ return ret;
+
+- if (value & 0x0f) {
+- dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
+- return -ENODEV;
++ switch (value & 0xf) {
++ case 0x0:
++ /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
++ case 0x8:
++ break;
++ default:
++ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
++ return -ENODEV;
+ }
+
+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
-From 73a0e49b562da9b06e487fb8e051075543495be5 Mon Sep 17 00:00:00 2001
From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 17 Oct 2013 15:50:48 -0700
Subject: [PATCH 1/5] PCI: imx6: swizzle interrupts
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
-@@ -676,7 +676,13 @@ int dw_pcie_map_irq(const struct pci_dev
+@@ -447,7 +447,13 @@ int dw_pcie_map_irq(const struct pci_dev
{
struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
+ }
}
- static void dw_pcie_add_bus(struct pci_bus *bus)
+ static struct hw_pci dw_pci = {
projects / openwrt / staging / jogo.git / commitdiff