--- /dev/null
+QorIQ DPAA Queue Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+ - QMan Portal
+ - QMan Pool Channel
+ - Example
+
+QMan Portal Node
+
+Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the QMan
+
+PROPERTIES
+
+- compatible
+ Usage: Required
+ Value type: <stringlist>
+ Definition: Must include "fsl,qman-portal-<hardware revision>"
+ May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"
+
+- reg
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Two regions. The first is the cache-enabled region of
+ the portal. The second is the cache-inhibited region of
+ the portal
+
+- interrupts
+ Usage: Required
+ Value type: <prop-encoded-array>
+ Definition: Standard property
+
+- fsl,liodn
+ Usage: See pamu.txt
+ Value type: <prop-encoded-array>
+ Definition: Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+ (FLIODN)
+
+- fsl,iommu-parent
+ Usage: See pamu.txt
+ Value type: <phandle>
+ Definition: PAMU property used for dynamic LIODN assignment
+
+ For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- fsl,qman-channel-id
+ Usage: Required
+ Value type: <u32>
+ Definition: The hardware index of the channel. This can also be
+ determined by dividing any of the channel's 8 work queue
+ IDs by 8
+
+In addition to these properties the qman-portals should have sub-nodes to
+represent the HW devices/portals that are connected to the software portal
+described here
+
+The currently supported sub-nodes are:
+ * fman0
+ * fman1
+ * pme
+ * crypto
+
+These subnodes should have the following properties:
+
+- fsl,liodn
+ Usage: See pamu.txt
+ Value type: <prop-encoded-array>
+ Definition: PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+ Usage: See pamu.txt
+ Value type: <phandle>
+ Definition: PAMU property used for dynamic LIODN assignment
+
+- dev-handle
+ Usage: Required
+ Value type: <phandle>
+ Definition: The phandle to the particular hardware device that this
+ portal is connected to.
+
+DPAA QMan Pool Channel Nodes
+
+Pool Channels are defined with the following properties.
+
+PROPERTIES
+
+- compatible
+ Usage: Required
+ Value type: <stringlist>
+ Definition: Must include "fsl,qman-pool-channel"
+ May include "fsl,<SoC>-qman-pool-channel"
+
+- fsl,qman-channel-id
+ Usage: Required
+ Value type: <u32>
+ Definition: The hardware index of the channel. This can also be
+ determined by dividing any of the channel's 8 work queue
+ IDs by 8
+
+EXAMPLE
+
+The example below shows a (P4080) QMan portals container/bus node with two portals
+
+ qman-portals@ff4200000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0xf 0xf4200000 0x200000>;
+
+ qman-portal@0 {
+ compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+ reg = <0 0x4000>, <0x100000 0x1000>;
+ interrupts = <104 2 0 0>;
+ fsl,liodn = <1 2>;
+ fsl,qman-channel-id = <0>;
+
+ fman0 {
+ fsl,liodn = <0x21>;
+ dev-handle = <&fman0>;
+ };
+ fman1 {
+ fsl,liodn = <0xa1>;
+ dev-handle = <&fman1>;
+ };
+ crypto {
+ fsl,liodn = <0x41 0x66>;
+ dev-handle = <&crypto>;
+ };
+ };
+ qman-portal@4000 {
+ compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+ reg = <0x4000 0x4000>, <0x101000 0x1000>;
+ interrupts = <106 2 0 0>;
+ fsl,liodn = <3 4>;
+ fsl,qman-channel-id = <1>;
+
+ fman0 {
+ fsl,liodn = <0x22>;
+ dev-handle = <&fman0>;
+ };
+ fman1 {
+ fsl,liodn = <0xa2>;
+ dev-handle = <&fman1>;
+ };
+ crypto {
+ fsl,liodn = <0x42 0x67>;
+ dev-handle = <&crypto>;
+ };
+ };
+ };