Update SMC91x driver for m32r.
- Remove needless NONCACHE_OFFSET adjustment.
> [PATCH 2.6.14-rc4] m32r: NONCACHE_OFFSET in _port2addr
> Change _port2addr() not to add NONCACHE_OFFSET.
> Adding NONCACHE_OFFSET requires needless address adjusting by a driver
> using ioremap() like a SMC91x driver.
- Fix lots of warnings as following:
/usr/src/ctest/git/kernel/drivers/net/smc91x.c: In function `smc_reset':
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:324: warning: passing arg 2 of `_outw' makes integer from pointer without a cast
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:325: warning: passing arg 2 of `_outw' makes integer from pointer without a cast
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:341: warning: passing arg 2 of `_outw' makes integer from pointer without a cast
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:342: warning: passing arg 2 of `_outw' makes integer from pointer without a cast
:
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:1915: warning: passing arg 1 of `_inw' makes integer from pointer without a cast
/usr/src/ctest/git/kernel/drivers/net/smc91x.c:1915: warning: passing arg 1 of `_inw' makes integer from pointer without a cast
Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* from 0x10000000 to 0x13ffffff on physical address.
* The base address of LAN controller(LAN91C111) is 0x300.
*/
-#define LAN_IOSTART 0x300
-#define LAN_IOEND 0x320
+#define LAN_IOSTART 0xa0000300
+#define LAN_IOEND 0xa0000320
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+ return (void *)(port + 0x10000000);
}
static inline void *_port2addr_usb(unsigned long port)
{
return (void *)(port | (NONCACHE_OFFSET));
}
-#define LAN_IOSTART 0x300
-#define LAN_IOEND 0x320
-
#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
static inline void *__port2addr_ata(unsigned long port)
{
}
#endif
+#define LAN_IOSTART 0xa0000300
+#define LAN_IOEND 0xa0000320
#ifdef CONFIG_CHIP_OPSP
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+ return (void *)(port + 0x10000000);
}
#else
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x04000000);
+ return (void *)(port + 0x04000000);
}
#endif
static inline void *_port2addr_usb(unsigned long port)
return (void *)(port + NONCACHE_OFFSET);
}
-#define LAN_IOSTART 0x300
-#define LAN_IOEND 0x320
-
#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
static inline void *__port2addr_ata(unsigned long port)
{
}
#endif
+#define LAN_IOSTART 0xa0000300
+#define LAN_IOEND 0xa0000320
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+ return (void *)(port + 0x10000000);
}
static inline void *_port2addr_usb(unsigned long port)
* from 0x10000000 to 0x13ffffff on physical address.
* The base address of LAN controller(LAN91C111) is 0x300.
*/
-#define LAN_IOSTART 0x300
-#define LAN_IOEND 0x320
+#define LAN_IOSTART 0xa0000300
+#define LAN_IOEND 0xa0000320
static inline void *_port2addr_ne(unsigned long port)
{
- return (void *)(port + NONCACHE_OFFSET + 0x10000000);
+ return (void *)(port + 0x10000000);
}
static inline void *_port2addr_usb(unsigned long port)
{
#define SMC_CAN_USE_16BIT 1
#define SMC_CAN_USE_32BIT 0
-#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000)
-#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
-#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
-#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
-#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
-#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
+#define SMC_inb(a, r) inb((u32)a) + (r))
+#define SMC_inw(a, r) inw(((u32)a) + (r))
+#define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
+#define SMC_outw(v, a, r) outw(v, ((u32)a) + (r))
+#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
+#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
#define set_irq_type(irq, type) do {} while(0)