ARM: dt: sun8i: switch the H3 to the new CCU driver
authorMaxime Ripard <maxime.ripard@free-electrons.com>
Wed, 29 Jun 2016 19:05:35 +0000 (21:05 +0200)
committerMichael Turquette <mturquette@baylibre.com>
Mon, 11 Jul 2016 21:38:01 +0000 (14:38 -0700)
Now that we have a different clock representation, switch to it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20160629190535.11855-15-maxime.ripard@free-electrons.com

arch/arm/boot/dts/sun8i-h3.dtsi

index 4a4926b0b0ed70774533eb81aaff0243a1f07dd6..9871bad34742faa756251f02e084938e483203a6 100644 (file)
 
 #include "skeleton.dtsi"
 
+#include <dt-bindings/clock/sun8i-h3-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun8i-h3-ccu.h>
 
 / {
        interrupt-parent = <&gic>;
                        clock-output-names = "osc32k";
                };
 
-               pll1: clk@01c20000 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun8i-a23-pll1-clk";
-                       reg = <0x01c20000 0x4>;
-                       clocks = <&osc24M>;
-                       clock-output-names = "pll1";
-               };
-
-               /* dummy clock until actually implemented */
-               pll5: pll5_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-clock";
-                       clock-frequency = <0>;
-                       clock-output-names = "pll5";
-               };
-
-               pll6: clk@01c20028 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-pll6-clk";
-                       reg = <0x01c20028 0x4>;
-                       clocks = <&osc24M>;
-                       clock-output-names = "pll6", "pll6x2";
-               };
-
-               pll6d2: pll6d2_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-factor-clock";
-                       clock-div = <2>;
-                       clock-mult = <1>;
-                       clocks = <&pll6 0>;
-                       clock-output-names = "pll6d2";
-               };
-
-               /* dummy clock until pll6 can be reused */
-               pll8: pll8_clk {
-                       #clock-cells = <0>;
-                       compatible = "fixed-clock";
-                       clock-frequency = <1>;
-                       clock-output-names = "pll8";
-               };
-
-               cpu: cpu_clk@01c20050 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-cpu-clk";
-                       reg = <0x01c20050 0x4>;
-                       clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-                       clock-output-names = "cpu";
-               };
-
-               axi: axi_clk@01c20050 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-axi-clk";
-                       reg = <0x01c20050 0x4>;
-                       clocks = <&cpu>;
-                       clock-output-names = "axi";
-               };
-
-               ahb1: ahb1_clk@01c20054 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun6i-a31-ahb1-clk";
-                       reg = <0x01c20054 0x4>;
-                       clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-                       clock-output-names = "ahb1";
-               };
-
-               ahb2: ahb2_clk@01c2005c {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun8i-h3-ahb2-clk";
-                       reg = <0x01c2005c 0x4>;
-                       clocks = <&ahb1>, <&pll6d2>;
-                       clock-output-names = "ahb2";
-               };
-
-               apb1: apb1_clk@01c20054 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-apb0-clk";
-                       reg = <0x01c20054 0x4>;
-                       clocks = <&ahb1>;
-                       clock-output-names = "apb1";
-               };
-
-               apb2: apb2_clk@01c20058 {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun4i-a10-apb1-clk";
-                       reg = <0x01c20058 0x4>;
-                       clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-                       clock-output-names = "apb2";
-               };
-
-               bus_gates: clk@01c20060 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun8i-h3-bus-gates-clk";
-                       reg = <0x01c20060 0x14>;
-                       clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
-                       clock-names = "ahb1", "ahb2", "apb1", "apb2";
-                       clock-indices = <5>, <6>, <8>,
-                                       <9>, <10>, <13>,
-                                       <14>, <17>, <18>,
-                                       <19>, <20>,
-                                       <21>, <23>,
-                                       <24>, <25>,
-                                       <26>, <27>,
-                                       <28>, <29>,
-                                       <30>, <31>, <32>,
-                                       <35>, <36>, <37>,
-                                       <40>, <41>, <43>,
-                                       <44>, <52>, <53>,
-                                       <54>, <64>,
-                                       <65>, <69>, <72>,
-                                       <76>, <77>, <78>,
-                                       <96>, <97>, <98>,
-                                       <112>, <113>,
-                                       <114>, <115>,
-                                       <116>, <128>, <135>;
-                       clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
-                                            "bus_mmc1", "bus_mmc2", "bus_nand",
-                                            "bus_sdram", "bus_gmac", "bus_ts",
-                                            "bus_hstimer", "bus_spi0",
-                                            "bus_spi1", "bus_otg",
-                                            "bus_otg_ehci0", "bus_ehci1",
-                                            "bus_ehci2", "bus_ehci3",
-                                            "bus_otg_ohci0", "bus_ohci1",
-                                            "bus_ohci2", "bus_ohci3", "bus_ve",
-                                            "bus_lcd0", "bus_lcd1", "bus_deint",
-                                            "bus_csi", "bus_tve", "bus_hdmi",
-                                            "bus_de", "bus_gpu", "bus_msgbox",
-                                            "bus_spinlock", "bus_codec",
-                                            "bus_spdif", "bus_pio", "bus_ths",
-                                            "bus_i2s0", "bus_i2s1", "bus_i2s2",
-                                            "bus_i2c0", "bus_i2c1", "bus_i2c2",
-                                            "bus_uart0", "bus_uart1",
-                                            "bus_uart2", "bus_uart3",
-                                            "bus_scr", "bus_ephy", "bus_dbg";
-               };
-
-               mmc0_clk: clk@01c20088 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-a10-mmc-clk";
-                       reg = <0x01c20088 0x4>;
-                       clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-                       clock-output-names = "mmc0",
-                                            "mmc0_output",
-                                            "mmc0_sample";
-               };
-
-               mmc1_clk: clk@01c2008c {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-a10-mmc-clk";
-                       reg = <0x01c2008c 0x4>;
-                       clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-                       clock-output-names = "mmc1",
-                                            "mmc1_output",
-                                            "mmc1_sample";
-               };
-
-               mmc2_clk: clk@01c20090 {
-                       #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-a10-mmc-clk";
-                       reg = <0x01c20090 0x4>;
-                       clocks = <&osc24M>, <&pll6 0>, <&pll8>;
-                       clock-output-names = "mmc2",
-                                            "mmc2_output",
-                                            "mmc2_sample";
-               };
-
-               usb_clk: clk@01c200cc {
-                       #clock-cells = <1>;
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun8i-h3-usb-clk";
-                       reg = <0x01c200cc 0x4>;
-                       clocks = <&osc24M>;
-                       clock-output-names = "usb_phy0", "usb_phy1",
-                                            "usb_phy2", "usb_phy3",
-                                            "usb_ohci0", "usb_ohci1",
-                                            "usb_ohci2", "usb_ohci3";
-               };
-
-               mbus_clk: clk@01c2015c {
-                       #clock-cells = <0>;
-                       compatible = "allwinner,sun8i-a23-mbus-clk";
-                       reg = <0x01c2015c 0x4>;
-                       clocks = <&osc24M>, <&pll6 1>, <&pll5>;
-                       clock-output-names = "mbus";
-               };
-
                apb0: apb0_clk {
                        compatible = "fixed-factor-clock";
                        #clock-cells = <0>;
                        compatible = "allwinner,sun8i-h3-dma";
                        reg = <0x01c02000 0x1000>;
                        interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 6>;
-                       resets = <&ahb_rst 6>;
+                       clocks = <&ccu CLK_BUS_DMA>;
+                       resets = <&ccu RST_BUS_DMA>;
                        #dma-cells = <1>;
                };
 
                mmc0: mmc@01c0f000 {
                        compatible = "allwinner,sun5i-a13-mmc";
                        reg = <0x01c0f000 0x1000>;
-                       clocks = <&bus_gates 8>,
-                                <&mmc0_clk 0>,
-                                <&mmc0_clk 1>,
-                                <&mmc0_clk 2>;
+                       clocks = <&ccu CLK_BUS_MMC0>,
+                                <&ccu CLK_MMC0>,
+                                <&ccu CLK_MMC0_OUTPUT>,
+                                <&ccu CLK_MMC0_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",
                                      "sample";
-                       resets = <&ahb_rst 8>;
+                       resets = <&ccu RST_BUS_MMC0>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
                        status = "disabled";
                mmc1: mmc@01c10000 {
                        compatible = "allwinner,sun5i-a13-mmc";
                        reg = <0x01c10000 0x1000>;
-                       clocks = <&bus_gates 9>,
-                                <&mmc1_clk 0>,
-                                <&mmc1_clk 1>,
-                                <&mmc1_clk 2>;
+                       clocks = <&ccu CLK_BUS_MMC1>,
+                                <&ccu CLK_MMC1>,
+                                <&ccu CLK_MMC1_OUTPUT>,
+                                <&ccu CLK_MMC1_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",
                                      "sample";
-                       resets = <&ahb_rst 9>;
+                       resets = <&ccu RST_BUS_MMC1>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
                        status = "disabled";
                mmc2: mmc@01c11000 {
                        compatible = "allwinner,sun5i-a13-mmc";
                        reg = <0x01c11000 0x1000>;
-                       clocks = <&bus_gates 10>,
-                                <&mmc2_clk 0>,
-                                <&mmc2_clk 1>,
-                                <&mmc2_clk 2>;
+                       clocks = <&ccu CLK_BUS_MMC2>,
+                                <&ccu CLK_MMC2>,
+                                <&ccu CLK_MMC2_OUTPUT>,
+                                <&ccu CLK_MMC2_SAMPLE>;
                        clock-names = "ahb",
                                      "mmc",
                                      "output",
                                      "sample";
-                       resets = <&ahb_rst 10>;
+                       resets = <&ccu RST_BUS_MMC2>;
                        reset-names = "ahb";
                        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
                        status = "disabled";
                                    "pmu1",
                                    "pmu2",
                                    "pmu3";
-                       clocks = <&usb_clk 8>,
-                                <&usb_clk 9>,
-                                <&usb_clk 10>,
-                                <&usb_clk 11>;
+                       clocks = <&ccu CLK_USB_PHY0>,
+                                <&ccu CLK_USB_PHY1>,
+                                <&ccu CLK_USB_PHY2>,
+                                <&ccu CLK_USB_PHY3>;
                        clock-names = "usb0_phy",
                                      "usb1_phy",
                                      "usb2_phy",
                                      "usb3_phy";
-                       resets = <&usb_clk 0>,
-                                <&usb_clk 1>,
-                                <&usb_clk 2>,
-                                <&usb_clk 3>;
+                       resets = <&ccu RST_USB_PHY0>,
+                                <&ccu RST_USB_PHY1>,
+                                <&ccu RST_USB_PHY2>,
+                                <&ccu RST_USB_PHY3>;
                        reset-names = "usb0_reset",
                                      "usb1_reset",
                                      "usb2_reset",
                        compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
                        reg = <0x01c1b000 0x100>;
                        interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 25>, <&bus_gates 29>;
-                       resets = <&ahb_rst 25>, <&ahb_rst 29>;
+                       clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
+                       resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
                        phys = <&usbphy 1>;
                        phy-names = "usb";
                        status = "disabled";
                        compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
                        reg = <0x01c1b400 0x100>;
                        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 29>, <&bus_gates 25>,
-                                <&usb_clk 17>;
-                       resets = <&ahb_rst 29>, <&ahb_rst 25>;
+                       clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>,
+                                <&ccu CLK_USB_OHCI1>;
+                       resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
                        phys = <&usbphy 1>;
                        phy-names = "usb";
                        status = "disabled";
                        compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
                        reg = <0x01c1c000 0x100>;
                        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 26>, <&bus_gates 30>;
-                       resets = <&ahb_rst 26>, <&ahb_rst 30>;
+                       clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
+                       resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
                        phys = <&usbphy 2>;
                        phy-names = "usb";
                        status = "disabled";
                        compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
                        reg = <0x01c1c400 0x100>;
                        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 30>, <&bus_gates 26>,
-                                <&usb_clk 18>;
-                       resets = <&ahb_rst 30>, <&ahb_rst 26>;
+                       clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>,
+                                <&ccu CLK_USB_OHCI2>;
+                       resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
                        phys = <&usbphy 2>;
                        phy-names = "usb";
                        status = "disabled";
                        compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
                        reg = <0x01c1d000 0x100>;
                        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 27>, <&bus_gates 31>;
-                       resets = <&ahb_rst 27>, <&ahb_rst 31>;
+                       clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
+                       resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
                        phys = <&usbphy 3>;
                        phy-names = "usb";
                        status = "disabled";
                        compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
                        reg = <0x01c1d400 0x100>;
                        interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 31>, <&bus_gates 27>,
-                                <&usb_clk 19>;
-                       resets = <&ahb_rst 31>, <&ahb_rst 27>;
+                       clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>,
+                                <&ccu CLK_USB_OHCI3>;
+                       resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
                        phys = <&usbphy 3>;
                        phy-names = "usb";
                        status = "disabled";
                };
 
+               ccu: clock@01c20000 {
+                       compatible = "allwinner,sun8i-h3-ccu";
+                       reg = <0x01c20000 0x400>;
+                       clocks = <&osc24M>, <&osc32k>;
+                       clock-names = "hosc", "losc";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
                pio: pinctrl@01c20800 {
                        compatible = "allwinner,sun8i-h3-pinctrl";
                        reg = <0x01c20800 0x400>;
                        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
                                     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&bus_gates 69>;
+                       clocks = <&ccu CLK_BUS_PIO>;
                        gpio-controller;
                        #gpio-cells = <3>;
                        interrupt-controller;
                        };
                };
 
-               ahb_rst: reset@01c202c0 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-ahb1-reset";
-                       reg = <0x01c202c0 0xc>;
-               };
-
-               apb1_rst: reset@01c202d0 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-clock-reset";
-                       reg = <0x01c202d0 0x4>;
-               };
-
-               apb2_rst: reset@01c202d8 {
-                       #reset-cells = <1>;
-                       compatible = "allwinner,sun6i-a31-clock-reset";
-                       reg = <0x01c202d8 0x4>;
-               };
-
                timer@01c20c00 {
                        compatible = "allwinner,sun4i-a10-timer";
                        reg = <0x01c20c00 0xa0>;
                        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 112>;
-                       resets = <&apb2_rst 16>;
+                       clocks = <&ccu CLK_BUS_UART0>;
+                       resets = <&ccu RST_BUS_UART0>;
                        dmas = <&dma 6>, <&dma 6>;
                        dma-names = "rx", "tx";
                        status = "disabled";
                        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 113>;
-                       resets = <&apb2_rst 17>;
+                       clocks = <&ccu CLK_BUS_UART1>;
+                       resets = <&ccu RST_BUS_UART1>;
                        dmas = <&dma 7>, <&dma 7>;
                        dma-names = "rx", "tx";
                        status = "disabled";
                        interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 114>;
-                       resets = <&apb2_rst 18>;
+                       clocks = <&ccu CLK_BUS_UART2>;
+                       resets = <&ccu RST_BUS_UART2>;
                        dmas = <&dma 8>, <&dma 8>;
                        dma-names = "rx", "tx";
                        status = "disabled";
                        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&bus_gates 115>;
-                       resets = <&apb2_rst 19>;
+                       clocks = <&ccu CLK_BUS_UART3>;
+                       resets = <&ccu RST_BUS_UART3>;
                        dmas = <&dma 9>, <&dma 9>;
                        dma-names = "rx", "tx";
                        status = "disabled";