--- /dev/null
+# CONFIG_AEABI is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_AR6000_WLAN is not set
+# CONFIG_ARCH_BAST is not set
+# CONFIG_ARCH_H1940 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C2440 is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SMDK2410 is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_ARCH_U300 is not set
+CONFIG_ARM=y
+CONFIG_ARM_THUMB=y
+# CONFIG_ARPD is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_BACKLIGHT_PWM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_BATTERY_BQ27000_HDQ=y
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BINARY_PRINTF is not set
+CONFIG_BITREVERSE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_CHARGER_PCF50633=y
+CONFIG_CMDLINE="unused -- bootloader passes ATAG list"
+CONFIG_COMPAT_BRK=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CONSTRUCTORS=y
+CONFIG_CPU_32=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_LLSERIAL_S3C2440=y
+CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_CPU_S3C2442=y
+CONFIG_CPU_S3C244X=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CRC16=y
+CONFIG_CRC7=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_S3C_UART=2
+# CONFIG_DEBUG_USER is not set
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DISPLAY_JBT6K74=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_ELF_CORE=y
+# CONFIG_EMBEDDED is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FB=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3C2410 is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FIQ=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_10x18 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FREEZER=y
+# CONFIG_FSNOTIFY is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAVE_AOUT=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PWM=y
+CONFIG_HDQ_GPIO_BITBANG=y
+CONFIG_HID=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GREENASIA=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_KYE=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SMARTJOYPLUS=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID_THRUSTMASTER=y
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_ZEROPLUS=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_HZ=200
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_S3C2410=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_GPIO_BUTTONS is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_LIS302DL=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+CONFIG_INPUT_PCF50633_PMU=y
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_ISDN is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GTA02_VIBRATOR=y
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_S3C24XX is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LOCK_KERNEL=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_MACH_AML_M5900 is not set
+# CONFIG_MACH_ANUBIS is not set
+# CONFIG_MACH_AT2440EVB is not set
+# CONFIG_MACH_JIVE is not set
+# CONFIG_MACH_MINI2440 is not set
+# CONFIG_MACH_N30 is not set
+CONFIG_MACH_NEO1973=y
+CONFIG_MACH_NEO1973_GTA02=y
+# CONFIG_MACH_NEXCODER_2440 is not set
+# CONFIG_MACH_OSIRIS is not set
+# CONFIG_MACH_OTOM is not set
+# CONFIG_MACH_QT2410 is not set
+# CONFIG_MACH_RX3715 is not set
+# CONFIG_MACH_SMDK2412 is not set
+# CONFIG_MACH_SMDK2413 is not set
+# CONFIG_MACH_SMDK2443 is not set
+# CONFIG_MACH_TCT_HAMMER is not set
+# CONFIG_MACH_VR1000 is not set
+# CONFIG_MACH_VSTMS is not set
+CONFIG_MFD_CORE=y
+CONFIG_MFD_GLAMO=y
+CONFIG_MFD_GLAMO_FB=y
+CONFIG_MFD_GLAMO_GPIO=y
+# CONFIG_MFD_GLAMO_MCI is not set
+CONFIG_MFD_PCF50633=y
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD_ABSENT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_S3C2410=y
+# CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set
+# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
+CONFIG_MTD_NAND_S3C2410_HWECC=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_ROM=y
+CONFIG_NAMESPACES=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NET_NS is not set
+CONFIG_NLS=y
+CONFIG_NO_IOPORT=y
+CONFIG_NR_TTY_DEVICES=6
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCF50633_ADC=y
+CONFIG_PCF50633_GPIO=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_PLAT_S3C=y
+CONFIG_PLAT_S3C24XX=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PREEMPT=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_GZIP=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_PCF50633=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_LEDS=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_PCF50633=y
+# CONFIG_RTC_DRV_RX8025 is not set
+CONFIG_RTC_DRV_S3C=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_PM=y
+# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+CONFIG_S3C2410_WATCHDOG=y
+# CONFIG_S3C24XX_ADC is not set
+CONFIG_S3C24XX_GPIO_EXTRA=64
+CONFIG_S3C24XX_GPIO_EXTRA64=y
+CONFIG_S3C24XX_PWM=y
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+# CONFIG_S3C_BOOT_WATCHDOG is not set
+CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DMA=y
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_LOWLEVEL_UART_PORT=2
+CONFIG_S3C_PWM=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_S3C2440=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+CONFIG_SERIO=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_SND=m
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_JACK=y
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+CONFIG_SND_PCM=m
+# CONFIG_SND_RAWMIDI_SEQ is not set
+CONFIG_SND_S3C24XX_SOC=m
+CONFIG_SND_S3C24XX_SOC_I2S=m
+# CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650 is not set
+CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753=m
+# CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_TIMER=m
+# CONFIG_SND_USB is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_S3C24XX=y
+CONFIG_SPI_S3C24XX_GPIO=y
+# CONFIG_SPI_SPIDEV is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_SQUASHFS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TCP_MD5SIG=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+CONFIG_TOUCHSCREEN_FILTER=y
+CONFIG_TOUCHSCREEN_FILTER_GROUP=y
+CONFIG_TOUCHSCREEN_FILTER_LINEAR=y
+CONFIG_TOUCHSCREEN_FILTER_MEAN=y
+CONFIG_TOUCHSCREEN_FILTER_MEDIAN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+CONFIG_TOUCHSCREEN_S3C2410=y
+# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+CONFIG_UID16=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_FILE_STORAGE is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+CONFIG_USB_GADGET_S3C2410=y
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_VBUS_DRAW=500
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_G_SERIAL is not set
+CONFIG_USB_HID=y
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_S3C2410=y
+# CONFIG_USB_S3C2410_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USER_NS is not set
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_VLAN_8021Q is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_W1=m
+# CONFIG_WLAN_80211 is not set
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+/*
+ * Bluetooth PM code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/err.h>
+#include <mach/gpio-fns.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+#include <linux/regulator/consumer.h>
+
+#define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
+
+struct gta02_pm_bt_data {
+ struct regulator *regulator;
+ struct rfkill *rfkill;
+ int pre_resume_state;
+};
+
+static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int ret = 0;
+ if (!strcmp(attr->attr.name, "power_on")) {
+ if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
+ ret = 1;
+ } else if (!strcmp(attr->attr.name, "reset")) {
+ if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
+ ret = 1;
+ }
+
+ if (!ret) {
+ return strlcpy(buf, "0\n", 3);
+ } else {
+ return strlcpy(buf, "1\n", 3);
+ }
+}
+
+static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
+{
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+ dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
+
+ bt_data = dev_get_drvdata(dev);
+
+ s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, !on);
+
+ if (on) {
+ if (!regulator_is_enabled(bt_data->regulator))
+ regulator_enable(bt_data->regulator);
+ } else {
+ if (regulator_is_enabled(bt_data->regulator))
+ regulator_disable(bt_data->regulator);
+ }
+
+ s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on);
+}
+
+
+static int bt_rfkill_set_block(void *data, bool blocked)
+{
+ struct device *dev = data;
+
+ __gta02_pm_bt_toggle_radio(dev, !blocked);
+
+ return 0;
+}
+
+static const struct rfkill_ops gta02_bt_rfkill_ops = {
+ .set_block = bt_rfkill_set_block,
+};
+
+
+static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long on = simple_strtoul(buf, NULL, 10);
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+ if (!strcmp(attr->attr.name, "power_on")) {
+ rfkill_set_sw_state(bt_data->rfkill, on ? 1 : 0);
+
+ __gta02_pm_bt_toggle_radio(dev, on);
+ } else if (!strcmp(attr->attr.name, "reset")) {
+ /* reset is low-active, so we need to invert */
+ s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
+static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
+
+#ifdef CONFIG_PM
+static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+
+ dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
+
+ bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
+ __gta02_pm_bt_toggle_radio(&pdev->dev, 0);
+
+ return 0;
+}
+
+static int gta02_bt_resume(struct platform_device *pdev)
+{
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+ dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
+
+ __gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
+ return 0;
+}
+#else
+#define gta02_bt_suspend NULL
+#define gta02_bt_resume NULL
+#endif
+
+static struct attribute *gta02_bt_sysfs_entries[] = {
+ &dev_attr_power_on.attr,
+ &dev_attr_reset.attr,
+ NULL
+};
+
+static struct attribute_group gta02_bt_attr_group = {
+ .name = NULL,
+ .attrs = gta02_bt_sysfs_entries,
+};
+
+static int __init gta02_bt_probe(struct platform_device *pdev)
+{
+ struct rfkill *rfkill;
+ struct regulator *regulator;
+ struct gta02_pm_bt_data *bt_data;
+ int ret;
+
+ dev_info(&pdev->dev, DRVMSG ": starting\n");
+
+ bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
+ dev_set_drvdata(&pdev->dev, bt_data);
+
+ regulator = regulator_get(&pdev->dev, "BT_3V2");
+ if (IS_ERR(regulator))
+ return -ENODEV;
+
+ bt_data->regulator = regulator;
+
+ /* this tests the true physical state of the regulator... */
+ if (regulator_is_enabled(regulator)) {
+ /*
+ * but these only operate on the logical state of the
+ * regulator... so we need to logicaly "adopt" it on
+ * to turn it off
+ */
+ regulator_enable(regulator);
+ regulator_disable(regulator);
+ }
+
+ /* we pull reset to low to make sure that the chip doesn't
+ * drain power through the reset line */
+ s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0);
+
+ rfkill = rfkill_alloc(pdev->name, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+ >a02_bt_rfkill_ops, &pdev->dev);
+
+ if (!rfkill) {
+ dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+ return -ENOMEM;
+ }
+
+ rfkill_init_sw_state(rfkill, 0);
+
+ ret = rfkill_register(rfkill);
+ if (ret) {
+ rfkill_destroy(rfkill);
+ dev_err(&pdev->dev, "Failed to register rfkill\n");
+ return ret;
+ }
+
+ bt_data->rfkill = rfkill;
+
+ return sysfs_create_group(&pdev->dev.kobj, >a02_bt_attr_group);
+}
+
+static int gta02_bt_remove(struct platform_device *pdev)
+{
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+ struct regulator *regulator;
+
+ sysfs_remove_group(&pdev->dev.kobj, >a02_bt_attr_group);
+
+ if (bt_data->rfkill) {
+ rfkill_destroy(bt_data->rfkill);
+ }
+
+ if (!bt_data || !bt_data->regulator)
+ return 0;
+
+ regulator = bt_data->regulator;
+
+ /* Make sure regulator is disabled before calling regulator_put */
+ if (regulator_is_enabled(regulator))
+ regulator_disable(regulator);
+
+ regulator_put(regulator);
+
+ kfree(bt_data);
+
+ return 0;
+}
+
+static struct platform_driver gta02_bt_driver = {
+ .probe = gta02_bt_probe,
+ .remove = gta02_bt_remove,
+ .suspend = gta02_bt_suspend,
+ .resume = gta02_bt_resume,
+ .driver = {
+ .name = "gta02-pm-bt",
+ },
+};
+
+static int __devinit gta02_bt_init(void)
+{
+ return platform_driver_register(>a02_bt_driver);
+}
+
+static void gta02_bt_exit(void)
+{
+ platform_driver_unregister(>a02_bt_driver);
+}
+
+module_init(gta02_bt_init);
+module_exit(gta02_bt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION(DRVMSG);
--- /dev/null
+/*
+ * GPS Power Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007-2009 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio-fns.h>
+#include <mach/cpu.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+
+struct gta02_pm_gps_data {
+#ifdef CONFIG_PM
+ int keep_on_in_suspend;
+#endif
+ int power_was_on;
+ struct regulator *regulator;
+};
+
+static struct gta02_pm_gps_data gta02_gps;
+
+int gta02_pm_gps_is_on(void)
+{
+ return gta02_gps.power_was_on;
+}
+EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
+
+/* This is the POWERON pin */
+static void gps_pwron_set(int on)
+{
+ if (on) {
+ /* return UART pins to being UART pins */
+ s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPH4_TXD1);
+ /* remove pulldown now it won't be floating any more */
+ s3c2410_gpio_pullup(S3C2410_GPH(5), 0);
+
+ if (!gta02_gps.power_was_on)
+ regulator_enable(gta02_gps.regulator);
+ } else {
+ /*
+ * take care not to power unpowered GPS from UART TX
+ * return them to GPIO and force low
+ */
+ s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPH(4), 0);
+ /* don't let RX from unpowered GPS float */
+ s3c2410_gpio_pullup(S3C2410_GPH(5), 1);
+ if (gta02_gps.power_was_on)
+ regulator_disable(gta02_gps.regulator);
+ }
+}
+
+static int gps_pwron_get(void)
+{
+ return regulator_is_enabled(gta02_gps.regulator);
+}
+
+#ifdef CONFIG_PM
+/* This is the flag for keeping gps ON during suspend */
+static void gps_keep_on_in_suspend_set(int on)
+{
+ gta02_gps.keep_on_in_suspend = on;
+}
+
+static int gps_keep_on_in_suspend_get(void)
+{
+ return gta02_gps.keep_on_in_suspend;
+}
+#endif
+
+static ssize_t power_gps_read(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret = 0;
+
+ if (!strcmp(attr->attr.name, "power_on") ||
+ !strcmp(attr->attr.name, "pwron")) {
+ ret = gps_pwron_get();
+#ifdef CONFIG_PM
+ } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+ ret = gps_keep_on_in_suspend_get();
+#endif
+ }
+ if (ret)
+ return strlcpy(buf, "1\n", 3);
+ else
+ return strlcpy(buf, "0\n", 3);
+}
+
+static ssize_t power_gps_write(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ unsigned long on = simple_strtoul(buf, NULL, 10);
+
+ if (!strcmp(attr->attr.name, "power_on") ||
+ !strcmp(attr->attr.name, "pwron")) {
+ gps_pwron_set(on);
+ gta02_gps.power_was_on = !!on;
+#ifdef CONFIG_PM
+ } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+ gps_keep_on_in_suspend_set(on);
+#endif
+ }
+ return count;
+}
+
+#ifdef CONFIG_PM
+static int gta02_pm_gps_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ if (!gta02_gps.keep_on_in_suspend ||
+ !gta02_gps.power_was_on)
+ gps_pwron_set(0);
+ else
+ dev_warn(&pdev->dev, "GTA02: keeping gps ON "
+ "during suspend\n");
+ return 0;
+}
+
+static int gta02_pm_gps_resume(struct platform_device *pdev)
+{
+ if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
+ gps_pwron_set(1);
+
+ return 0;
+}
+
+static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
+#else
+#define gta02_pm_gps_suspend NULL
+#define gta02_pm_gps_resume NULL
+#endif
+
+static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
+
+static struct attribute *gta02_gps_sysfs_entries[] = {
+ &dev_attr_power_on.attr,
+#ifdef CONFIG_PM
+ &dev_attr_keep_on_in_suspend.attr,
+#endif
+ NULL
+};
+
+static struct attribute_group gta02_gps_attr_group = {
+ .name = NULL,
+ .attrs = gta02_gps_sysfs_entries,
+};
+
+static int __init gta02_pm_gps_probe(struct platform_device *pdev)
+{
+ gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
+ if (IS_ERR(gta02_gps.regulator)) {
+ dev_err(&pdev->dev, "probe failed %ld\n",
+ PTR_ERR(gta02_gps.regulator));
+
+ return PTR_ERR(gta02_gps.regulator);
+ }
+
+ dev_info(&pdev->dev, "starting\n");
+
+ /*
+ * Here we should call the code that handles the set GPS power
+ * off action. But, the regulator API does not allow us to
+ * reassert regulator state, and when we read the regulator API
+ * logical state, it can differ from the actual state, So
+ * a workaround for this is to just set the regulator off in the
+ * PMU directly. Because that's different from normal flow, we
+ * have to reproduce other things from the OFF action here too.
+ */
+
+ /*
+ * u-boot enables LDO5 (GPS), which doesn't make sense and
+ * causes confusion. We therefore disable the regulator here.
+ */
+ pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
+
+ /*
+ * take care not to power unpowered GPS from UART TX
+ * return them to GPIO and force low
+ */
+ s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPH(4), 0);
+ /* don't let RX from unpowered GPS float */
+ s3c2410_gpio_pullup(S3C2410_GPH(5), 1);
+
+ return sysfs_create_group(&pdev->dev.kobj,
+ >a02_gps_attr_group);
+}
+
+static int gta02_pm_gps_remove(struct platform_device *pdev)
+{
+ regulator_put(gta02_gps.regulator);
+ sysfs_remove_group(&pdev->dev.kobj, >a02_gps_attr_group);
+ return 0;
+}
+
+static struct platform_driver gta02_pm_gps_driver = {
+ .probe = gta02_pm_gps_probe,
+ .remove = gta02_pm_gps_remove,
+ .suspend = gta02_pm_gps_suspend,
+ .resume = gta02_pm_gps_resume,
+ .driver = {
+ .name = "gta02-pm-gps",
+ },
+};
+
+static int __devinit gta02_pm_gps_init(void)
+{
+ return platform_driver_register(>a02_pm_gps_driver);
+}
+
+static void gta02_pm_gps_exit(void)
+{
+ platform_driver_unregister(>a02_pm_gps_driver);
+}
+
+module_init(gta02_pm_gps_init);
+module_exit(gta02_pm_gps_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
--- /dev/null
+/*
+ * GSM Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <mach/gpio.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/cpu.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+
+int gta_gsm_interrupts;
+EXPORT_SYMBOL(gta_gsm_interrupts);
+
+extern void s3c24xx_serial_console_set_silence(int);
+
+struct gta02pm_priv {
+ int gpio_ndl_gsm;
+ struct console *con;
+};
+
+static struct gta02pm_priv gta02_gsm;
+
+static struct console *find_s3c24xx_console(void)
+{
+ struct console *con;
+
+ acquire_console_sem();
+
+ for (con = console_drivers; con; con = con->next) {
+ if (!strcmp(con->name, "ttySAC"))
+ break;
+ }
+
+ release_console_sem();
+
+ return con;
+}
+
+static ssize_t gsm_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ if (!strcmp(attr->attr.name, "power_on")) {
+ if (pcf50633_gpio_get(gta02_pcf, PCF50633_GPIO2))
+ goto out_1;
+ } else if (!strcmp(attr->attr.name, "download")) {
+ if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM))
+ goto out_1;
+ } else if (!strcmp(attr->attr.name, "flowcontrolled")) {
+ if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT)
+ goto out_1;
+ }
+
+ return strlcpy(buf, "0\n", 3);
+out_1:
+ return strlcpy(buf, "1\n", 3);
+}
+
+static void gsm_on_off(struct device *dev, int on)
+{
+ if (!on) {
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPIO_INPUT);
+
+ pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 0);
+
+ if (gta02_gsm.con) {
+ s3c24xx_serial_console_set_silence(0);
+ console_start(gta02_gsm.con);
+
+ dev_dbg(dev, "powered down gta02 GSM, enabling "
+ "serial console\n");
+ }
+
+ return;
+ }
+
+ if (gta02_gsm.con) {
+ dev_dbg(dev, "powering up GSM, thus "
+ "disconnecting serial console\n");
+
+ console_stop(gta02_gsm.con);
+ s3c24xx_serial_console_set_silence(1);
+ }
+
+ /* allow UART to talk to GSM side now we will power it */
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+
+ pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 7);
+
+ msleep(100);
+
+ s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 1);
+ msleep(500);
+ s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 0);
+
+ /*
+ * workaround for calypso firmware moko10 and earlier,
+ * without this it will leave IRQ line high after
+ * booting
+ */
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+ msleep(1000);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+
+}
+
+static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long on = simple_strtoul(buf, NULL, 10);
+
+ if (!strcmp(attr->attr.name, "power_on")) {
+ gsm_on_off(dev, on);
+
+ return count;
+ }
+
+ if (!strcmp(attr->attr.name, "download")) {
+ /*
+ * the keyboard / buttons driver requests and enables
+ * the JACK_INSERT IRQ. We have to take care about
+ * not enabling and disabling the IRQ when it was
+ * already in that state or we get "unblanaced IRQ"
+ * kernel warnings and stack dumps. So we use the
+ * copy of the ndl_gsm state to figure out if we should
+ * enable or disable the jack interrupt
+ */
+ if (on) {
+ if (gta02_gsm.gpio_ndl_gsm)
+ disable_irq(gpio_to_irq(
+ GTA02_GPIO_JACK_INSERT));
+ } else {
+ if (!gta02_gsm.gpio_ndl_gsm)
+ enable_irq(gpio_to_irq(
+ GTA02_GPIO_JACK_INSERT));
+ }
+
+ gta02_gsm.gpio_ndl_gsm = !on;
+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on);
+
+ return count;
+ }
+
+ if (!strcmp(attr->attr.name, "flowcontrolled")) {
+ if (on) {
+ gta_gsm_interrupts = 0;
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+ } else
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(download, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write);
+
+#ifdef CONFIG_PM
+
+static int gta02_gsm_resume(struct platform_device *pdev);
+static int gta02_gsm_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+ * don't need to do much here. */
+
+ /* If flowcontrol asserted, abort if GSM already interrupted */
+ if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
+ if (gta_gsm_interrupts)
+ goto busy;
+ }
+
+ /* disable DL GSM to prevent jack_insert becoming 'floating' */
+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+ return 0;
+
+busy:
+ return -EBUSY;
+}
+
+static int
+gta02_gsm_suspend_late(struct platform_device *pdev, pm_message_t state)
+{
+ /* Last chance: abort if GSM already interrupted */
+ if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
+ if (gta_gsm_interrupts)
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static int gta02_gsm_resume(struct platform_device *pdev)
+{
+ /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+ * don't need to do much here. */
+
+ /* Make sure that the kernel console on the serial port is still
+ * disabled. FIXME: resume ordering race with serial driver! */
+ if (gta02_gsm.con && s3c2410_gpio_getpin(GTA02_GPIO_MODEM_ON))
+ console_stop(gta02_gsm.con);
+
+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta02_gsm.gpio_ndl_gsm);
+
+ return 0;
+}
+#else
+#define gta02_gsm_suspend NULL
+#define gta02_gsm_suspend_late NULL
+#define gta02_gsm_resume NULL
+#endif /* CONFIG_PM */
+
+static struct attribute *gta02_gsm_sysfs_entries[] = {
+ &dev_attr_power_on.attr,
+ &dev_attr_reset.attr,
+ &dev_attr_download.attr,
+ &dev_attr_flowcontrolled.attr,
+ NULL
+};
+
+static struct attribute_group gta02_gsm_attr_group = {
+ .name = NULL,
+ .attrs = gta02_gsm_sysfs_entries,
+};
+
+static int __init gta02_gsm_probe(struct platform_device *pdev)
+{
+ switch (S3C_SYSTEM_REV_ATAG) {
+ case GTA02v1_SYSTEM_REV:
+ case GTA02v2_SYSTEM_REV:
+ case GTA02v3_SYSTEM_REV:
+ case GTA02v4_SYSTEM_REV:
+ case GTA02v5_SYSTEM_REV:
+ case GTA02v6_SYSTEM_REV:
+ break;
+ default:
+ dev_warn(&pdev->dev, "Unknown Freerunner Revision 0x%x, "
+ "some PM features not available!!!\n",
+ system_rev);
+ break;
+ }
+
+ gta02_gsm.con = find_s3c24xx_console();
+ if (!gta02_gsm.con)
+ dev_warn(&pdev->dev,
+ "cannot find S3C24xx console driver\n");
+
+ /* note that download initially disabled, and enforce that */
+ gta02_gsm.gpio_ndl_gsm = 1;
+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+
+ /* GSM is to be initially off (at boot, or if this module inserted) */
+ gsm_on_off(&pdev->dev, 0);
+
+ return sysfs_create_group(&pdev->dev.kobj, >a02_gsm_attr_group);
+}
+
+static int gta02_gsm_remove(struct platform_device *pdev)
+{
+ sysfs_remove_group(&pdev->dev.kobj, >a02_gsm_attr_group);
+
+ return 0;
+}
+
+static struct platform_driver gta02_gsm_driver = {
+ .probe = gta02_gsm_probe,
+ .remove = gta02_gsm_remove,
+ .suspend = gta02_gsm_suspend,
+ .suspend_late = gta02_gsm_suspend_late,
+ .resume = gta02_gsm_resume,
+ .driver = {
+ .name = "gta02-pm-gsm",
+ },
+};
+
+static int __devinit gta02_gsm_init(void)
+{
+ return platform_driver_register(>a02_gsm_driver);
+}
+
+static void gta02_gsm_exit(void)
+{
+ platform_driver_unregister(>a02_gsm_driver);
+}
+
+module_init(gta02_gsm_init);
+module_exit(gta02_gsm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner GSM Power Management");
--- /dev/null
+/*
+ * GTA02 WLAN power management
+ *
+ * (C) 2008, 2009 by Openmoko Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <mach/gta02-pm-wlan.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/gpio-fns.h>
+
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+
+/* ----- Module hardware reset ("power") ----------------------------------- */
+
+
+void gta02_wlan_reset(int assert_reset)
+{
+ if (assert_reset) {
+ s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
+ msleep(200); /* probably excessive but we don't have specs */
+ } else {
+ s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
+ }
+}
+
+/* ----- rfkill ------------------------------------------------------------ */
+
+/*
+ * S3C MCI handles suspend/resume through device removal/insertion. In order to
+ * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt,
+ * we therefore need to maintain rfkill state outside the driver.
+ *
+ * This platform driver is as good a place as any other.
+ */
+
+static int (*gta02_wlan_rfkill_cb)(void *user, int on);
+static void *gta02_wlan_rfkill_user;
+static DEFINE_MUTEX(gta02_wlan_rfkill_lock);
+static int gta02_wlan_rfkill_on;
+
+/*
+ * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the
+ * driver is ready to process rfkill callbacks. To prevent the state from
+ * changing until the driver has completed its initialization, we grab and hold
+ * the rfkill lock.
+ *
+ * A call to gta02_wlan_query_rfkill_lock must be followed by either
+ * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or
+ * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process.
+ */
+
+int gta02_wlan_query_rfkill_lock(void)
+{
+ mutex_lock(>a02_wlan_rfkill_lock);
+ return gta02_wlan_rfkill_on;
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock);
+
+void gta02_wlan_query_rfkill_unlock(void)
+{
+ mutex_unlock(>a02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock);
+
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user)
+{
+ BUG_ON(!mutex_is_locked(>a02_wlan_rfkill_lock));
+ BUG_ON(gta02_wlan_rfkill_cb);
+ gta02_wlan_rfkill_cb = cb;
+ gta02_wlan_rfkill_user = user;
+ mutex_unlock(>a02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb);
+
+void gta02_wlan_clear_rfkill_cb(void)
+{
+ mutex_lock(>a02_wlan_rfkill_lock);
+ BUG_ON(!gta02_wlan_rfkill_cb);
+ gta02_wlan_rfkill_cb = NULL;
+ mutex_unlock(>a02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb);
+
+static int gta02_wlan_set_radio_block(void *data, bool blocked)
+{
+ struct device *dev = data;
+ int res = 0;
+
+ dev_dbg(dev, "gta02_wlan_toggle_radio: blocked %d (%p)\n",
+ blocked, gta02_wlan_rfkill_cb);
+ mutex_lock(>a02_wlan_rfkill_lock);
+ if (gta02_wlan_rfkill_cb)
+ res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, !blocked);
+ if (!res)
+ gta02_wlan_rfkill_on = !blocked;
+ mutex_unlock(>a02_wlan_rfkill_lock);
+ return res;
+}
+
+static const struct rfkill_ops gta02_wlan_rfkill_ops = {
+ .set_block = gta02_wlan_set_radio_block,
+};
+
+/* ----- Initialization/removal -------------------------------------------- */
+
+
+static int __init gta02_wlan_probe(struct platform_device *pdev)
+{
+ /* default-on for now */
+ const int default_state = 1;
+ struct rfkill *rfkill;
+ int ret;
+
+ dev_info(&pdev->dev, "starting\n");
+
+ s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
+ gta02_wlan_reset(1);
+ gta02_wlan_reset(0);
+
+ rfkill = rfkill_alloc("ar6000", &pdev->dev, RFKILL_TYPE_WLAN,
+ >a02_wlan_rfkill_ops, &pdev->dev);
+
+
+ if (!rfkill) {
+ dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+ return -ENOMEM;
+ }
+
+ rfkill_init_sw_state(rfkill, default_state);
+ /*
+ * If the WLAN driver somehow managed to get activated before we're
+ * ready, the driver is now in an unknown state, which isn't something
+ * we're prepared to handle. This can't happen, so just fail hard.
+ */
+ BUG_ON(gta02_wlan_rfkill_cb);
+ gta02_wlan_rfkill_on = default_state;
+
+ ret = rfkill_register(rfkill);
+ if (ret) {
+ rfkill_destroy(rfkill);
+ dev_err(&pdev->dev, "Failed to register rfkill\n");
+ return ret;
+ }
+
+ dev_set_drvdata(&pdev->dev, rfkill);
+
+ return 0;
+}
+
+static int gta02_wlan_remove(struct platform_device *pdev)
+{
+ struct rfkill *rfkill = dev_get_drvdata(&pdev->dev);
+
+ rfkill_destroy(rfkill);
+
+ return 0;
+}
+
+static struct platform_driver gta02_wlan_driver = {
+ .probe = gta02_wlan_probe,
+ .remove = gta02_wlan_remove,
+ .driver = {
+ .name = "gta02-pm-wlan",
+ },
+};
+
+static int __devinit gta02_wlan_init(void)
+{
+ return platform_driver_register(>a02_wlan_driver);
+}
+
+static void gta02_wlan_exit(void)
+{
+ platform_driver_unregister(>a02_wlan_driver);
+}
+
+module_init(gta02_wlan_init);
+module_exit(gta02_wlan_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management");
--- /dev/null
+extern int gta02_pm_gps_is_on(void);
--- /dev/null
+extern int gta_gsm_interrupts;
--- /dev/null
+#ifndef __MACH_GTA02_PM_WLAN_H
+#define __MACH_GTA02_PM_WLAN_H
+
+void gta02_wlan_reset(int assert_reset);
+int gta02_wlan_query_rfkill_lock(void);
+void gta02_wlan_query_rfkill_unlock(void);
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user);
+void gta02_wlan_clear_rfkill_cb(void);
+
+#endif /* __MACH_GTA02_PM_WLAN_H */
--- /dev/null
+#ifndef _GTA02_H
+#define _GTA02_H
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/gpio.h>
+#include <mach/irqs.h>
+
+/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
+#define GTA02v1_SYSTEM_REV 0x00000310
+#define GTA02v2_SYSTEM_REV 0x00000320
+#define GTA02v3_SYSTEM_REV 0x00000330
+#define GTA02v4_SYSTEM_REV 0x00000340
+#define GTA02v5_SYSTEM_REV 0x00000350
+#define GTA02v6_SYSTEM_REV 0x00000360
+
+#define GTA02_GPIO_n3DL_GSM S3C2410_GPA(13) /* v1 + v2 + v3 only */
+
+#define GTA02_GPIO_PWR_LED1 S3C2410_GPB(0)
+#define GTA02_GPIO_PWR_LED2 S3C2410_GPB(1)
+#define GTA02_GPIO_AUX_LED S3C2410_GPB(2)
+#define GTA02_GPIO_VIBRATOR_ON S3C2410_GPB(3)
+#define GTA02_GPIO_MODEM_RST S3C2410_GPB(5)
+#define GTA02_GPIO_BT_EN S3C2410_GPB(6)
+#define GTA02_GPIO_MODEM_ON S3C2410_GPB(7)
+#define GTA02_GPIO_EXTINT8 S3C2410_GPB(8)
+#define GTA02_GPIO_USB_PULLUP S3C2410_GPB(9)
+
+#define GTA02_GPIO_PIO5 S3C2410_GPC(5) /* v3 + v4 only */
+#define GTA02v3_GPIO_nG1_CS S3C2410_GPD(12) /* v3 + v4 only */
+#define GTA02v3_GPIO_nG2_CS S3C2410_GPD(13) /* v3 + v4 only */
+#define GTA02v5_GPIO_HDQ S3C2410_GPD(14) /* v5 + */
+
+#define GTA02_GPIO_nG1_INT S3C2410_GPF(0)
+#define GTA02_GPIO_IO1 S3C2410_GPF(1)
+#define GTA02_GPIO_PIO_2 S3C2410_GPF(2) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_JACK_INSERT S3C2410_GPF(4)
+#define GTA02_GPIO_WLAN_GPIO1 S3C2410_GPF(5) /* v2 + v3 + v4 only */
+#define GTA02_GPIO_AUX_KEY S3C2410_GPF(6)
+#define GTA02_GPIO_HOLD_KEY S3C2410_GPF(7)
+
+#define GTA02_GPIO_3D_IRQ S3C2410_GPG(4)
+#define GTA02v2_GPIO_nG2_INT S3C2410_GPG(8) /* v2 + v3 + v4 only */
+#define GTA02v3_GPIO_nUSB_OC S3C2410_GPG(9) /* v3 + v4 only */
+#define GTA02v3_GPIO_nUSB_FLT S3C2410_GPG(10) /* v3 + v4 only */
+#define GTA02v3_GPIO_nGSM_OC S3C2410_GPG(11) /* v3 + v4 only */
+
+#define GTA02_GPIO_AMP_SHUT S3C2440_GPJ1 /* v2 + v3 + v4 only */
+#define GTA02v1_GPIO_WLAN_GPIO10 S3C2440_GPJ2
+#define GTA02_GPIO_HP_IN S3C2440_GPJ2 /* v2 + v3 + v4 only */
+#define GTA02_GPIO_INT0 S3C2440_GPJ3 /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nGSM_EN S3C2440_GPJ4
+#define GTA02_GPIO_3D_RESET S3C2440_GPJ5
+#define GTA02_GPIO_nDL_GSM S3C2440_GPJ6 /* v4 + v5 only */
+#define GTA02_GPIO_WLAN_GPIO0 S3C2440_GPJ7
+#define GTA02v1_GPIO_BAT_ID S3C2440_GPJ8
+#define GTA02_GPIO_KEEPACT S3C2440_GPJ8
+#define GTA02v1_GPIO_HP_IN S3C2440_GPJ10
+#define GTA02_CHIP_PWD S3C2440_GPJ11 /* v2 + v3 + v4 only */
+#define GTA02_GPIO_nWLAN_RESET S3C2440_GPJ12 /* v2 + v3 + v4 only */
+
+#define GTA02_IRQ_GSENSOR_1 IRQ_EINT0
+#define GTA02_IRQ_MODEM IRQ_EINT1
+#define GTA02_IRQ_PIO_2 IRQ_EINT2 /* v2 + v3 + v4 only */
+#define GTA02_IRQ_nJACK_INSERT IRQ_EINT4
+#define GTA02_IRQ_WLAN_GPIO1 IRQ_EINT5
+#define GTA02_IRQ_AUX IRQ_EINT6
+#define GTA02_IRQ_nHOLD IRQ_EINT7
+#define GTA02_IRQ_PCF50633 IRQ_EINT9
+#define GTA02_IRQ_3D IRQ_EINT12
+#define GTA02_IRQ_GSENSOR_2 IRQ_EINT16 /* v2 + v3 + v4 only */
+#define GTA02v3_IRQ_nUSB_OC IRQ_EINT17 /* v3 + v4 only */
+#define GTA02v3_IRQ_nUSB_FLT IRQ_EINT18 /* v3 + v4 only */
+#define GTA02v3_IRQ_nGSM_OC IRQ_EINT19 /* v3 + v4 only */
+
+/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
+#define GTA02_PCB_ID1_0 S3C2410_GPC(13)
+#define GTA02_PCB_ID1_1 S3C2410_GPC(15)
+#define GTA02_PCB_ID1_2 S3C2410_GPD(0)
+#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
+#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
+
+#define GTA02_GPIO_GLAMO_BASE S3C_GPIO_END
+#define GTA02_GPIO_GLAMO(x) (GTA02_GPIO_GLAMO_BASE + x)
+
+int gta02_get_pcb_revision(void);
+
+extern struct pcf50633 *gta02_pcf;
+
+#endif /* _GTA02_H */
--- /dev/null
+/*
+ * linux/arch/arm/mach-s3c2442/mach-gta02.c
+ *
+ * S3C2442 Machine Support for the Openmoko Freerunner (GTA02)
+ *
+ * Copyright (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/mmc/host.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <linux/i2c.h>
+#include <linux/backlight.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/lis302dl.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/fb.h>
+#include <mach/mci.h>
+#include <mach/ts.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
+#include <mach/regs-mem.h>
+#include <plat/pwm.h>
+#include <mach/cpu.h>
+
+#include <mach/gta02.h>
+
+#include <plat/regs-serial.h>
+#include <plat/nand.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/udc.h>
+#include <plat/iic.h>
+#include <plat/usb-control.h>
+#include <plat/regs-timer.h>
+#include <plat/gpio-core.h>
+
+#include <mach/gta02-pm-gsm.h>
+#include <mach/gta02-pm-gps.h>
+#include <mach/gta02-pm-wlan.h>
+
+#include <linux/jbt6k74.h>
+#include <linux/glamofb.h>
+#include <linux/mfd/glamo.h>
+
+#include <linux/hdq.h>
+#include <linux/bq27000_battery.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+#include <linux/touchscreen/ts_filter_linear.h>
+#include <linux/touchscreen/ts_filter_mean.h>
+#include <linux/touchscreen/ts_filter_median.h>
+#include <linux/touchscreen/ts_filter_group.h>
+#endif
+
+#include <asm/fiq.h>
+
+#include <linux/gta02-vibrator.h>
+
+/* -------------------------------------------------------------------------------
+ * GTA02 FIQ related
+ *
+ * Calls into vibrator and hdq and based on the return values
+ * determines if we the FIQ source be kept alive
+ */
+
+#define DIVISOR_FROM_US(x) ((x) << 3)
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
+extern int hdq_fiq_handler(void);
+#endif
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
+extern int gta02_vibrator_fiq_handler(void);
+#endif
+
+#if defined(CONFIG_LEDS_GTA02_VIBRATOR) || defined(CONFIG_HDQ_GPIO_BITBANG)
+
+/* Global data related to our fiq source */
+static u32 gta02_fiq_ack_mask;
+static struct s3c2410_pwm gta02_fiq_pwm_timer;
+static u16 gta02_fiq_timer_index;
+static int gta02_fiq_irq;
+
+static void gta02_fiq_handler(void)
+{
+ u16 divisor = 0xffff;
+
+ /* Vibrator servicing */
+
+ /* disable further timer interrupts if nobody has any work
+ * or adjust rate according to who still has work
+ *
+ * CAUTION: it means forground code must disable FIQ around
+ * its own non-atomic S3C2410_INTMSK changes... not common
+ * thankfully and taken care of by the fiq-basis patch
+ */
+
+#ifdef CONFIG_LEDS_GTA02_VIBRATOR
+ if (gta02_vibrator_fiq_handler())
+ divisor = FIQ_DIVISOR_VIBRATOR;
+#endif
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+ if (hdq_fiq_handler())
+ divisor = FIQ_DIVISOR_HDQ;
+#endif
+
+ if (divisor == 0xffff) /* mask the fiq irq source */
+ __raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask,
+ S3C2410_INTMSK);
+ else /* still working, maybe at a different rate */
+ __raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index));
+
+ __raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
+}
+
+static void gta02_fiq_kick(void)
+{
+ unsigned long flags;
+ u32 tcon;
+
+ /* we have to take care about FIQ because this modification is
+ * non-atomic, FIQ could come in after the read and before the
+ * writeback and its changes to the register would be lost
+ * (platform INTMSK mod code is taken care of already)
+ */
+ local_save_flags(flags);
+ local_fiq_disable();
+ /* allow FIQs to resume */
+ __raw_writel(__raw_readl(S3C2410_INTMSK) &
+ ~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)),
+ S3C2410_INTMSK);
+ tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START;
+ /* fake the timer to a count of 1 */
+ __raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index));
+ __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON);
+ __raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START,
+ S3C2410_TCON);
+ __raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON);
+ local_irq_restore(flags);
+}
+
+static int gta02_fiq_enable(void)
+{
+ int irq_index_fiq = IRQ_TIMER3;
+ int rc = 0;
+
+ local_fiq_disable();
+
+ gta02_fiq_irq = irq_index_fiq;
+ gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET);
+ gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0);
+
+ /* set up the timer to operate as a pwm device */
+
+ rc = s3c2410_pwm_init(>a02_fiq_pwm_timer);
+ if (rc)
+ goto bail;
+
+ gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index;
+ gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2;
+ gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2;
+ /* default rate == ~32us */
+ gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000;
+
+ rc = s3c2410_pwm_enable(>a02_fiq_pwm_timer);
+ if (rc)
+ goto bail;
+
+ s3c2410_pwm_start(>a02_fiq_pwm_timer);
+
+ /* let our selected interrupt be a magic FIQ interrupt */
+ __raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
+
+ /* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
+ local_fiq_enable();
+
+ set_fiq_c_handler(gta02_fiq_handler);
+
+ return 0;
+
+bail:
+ printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc);
+
+ return rc;
+}
+
+static void gta02_fiq_disable(void)
+{
+ __raw_writel(0, S3C2410_INTMOD);
+ local_fiq_disable();
+ gta02_fiq_irq = 0; /* no active source interrupt now either */
+
+}
+/* -------------------- /GTA02 FIQ Handler ------------------------------------- */
+
+#endif
+
+/*
+ * this gets called every 1ms when we paniced.
+ */
+
+static long gta02_panic_blink(long count)
+{
+ long delay = 0;
+ static long last_blink;
+ static char led;
+
+ if (count - last_blink < 100) /* 200ms period, fast blink */
+ return 0;
+
+ led ^= 1;
+ s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(GTA02_GPIO_AUX_LED, led);
+
+ last_blink = count;
+ return delay;
+}
+
+
+/**
+ * returns PCB revision information in b9,b8 and b2,b1,b0
+ * Pre-GTA02 A6 returns 0x000
+ * GTA02 A6 returns 0x101
+ * ...
+ */
+
+int gta02_get_pcb_revision(void)
+{
+ int n;
+ int u = 0;
+ static unsigned long pinlist[] = {
+ GTA02_PCB_ID1_0,
+ GTA02_PCB_ID1_1,
+ GTA02_PCB_ID1_2,
+ GTA02_PCB_ID2_0,
+ GTA02_PCB_ID2_1,
+ };
+ static int pin_offset[] = {
+ 0, 1, 2, 8, 9
+ };
+
+ for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) {
+ /*
+ * set the PCB version GPIO to be pulled-down input
+ * force low briefly first
+ */
+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(pinlist[n], 0);
+ /* misnomer: it is a pullDOWN in 2442 */
+ s3c2410_gpio_pullup(pinlist[n], 1);
+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT);
+
+ udelay(10);
+
+ if (s3c2410_gpio_getpin(pinlist[n]))
+ u |= 1 << pin_offset[n];
+
+ /*
+ * when not being interrogated, all of the revision GPIO
+ * are set to output HIGH without pulldown so no current flows
+ * if they are NC or pulled up.
+ */
+ s3c2410_gpio_setpin(pinlist[n], 1);
+ s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
+ /* misnomer: it is a pullDOWN in 2442 */
+ s3c2410_gpio_pullup(pinlist[n], 0);
+ }
+
+ return u;
+}
+
+struct platform_device gta02_resume_reason_device = {
+ .name = "gta02-resume",
+ .num_resources = 0,
+};
+
+static struct map_desc gta02_iodesc[] __initdata = {
+ {
+ .virtual = 0xe0000000,
+ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ },
+};
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg gta02_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+
+};
+
+struct pcf50633 *gta02_pcf;
+
+#ifdef CONFIG_CHARGER_PCF50633
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+static int gta02_get_charger_online_status(void)
+{
+ struct pcf50633 *pcf = gta02_pcf;
+
+ return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
+}
+
+static int gta02_get_charger_active_status(void)
+{
+ struct pcf50633 *pcf = gta02_pcf;
+
+ return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
+}
+#endif
+
+#define ADC_NOM_CHG_DETECT_1A 6
+#define ADC_NOM_CHG_DETECT_USB 43
+
+static void
+gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
+{
+ int ma;
+
+ /* Interpret charger type */
+ if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
+
+ /* Stop GPO driving out now that we have a IA charger */
+ pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
+
+ ma = 1000;
+ } else
+ ma = 100;
+
+ pcf50633_mbc_usb_curlim_set(pcf, ma);
+}
+
+static struct delayed_work gta02_charger_work;
+static int gta02_usb_vbus_draw;
+
+static void gta02_charger_worker(struct work_struct *work)
+{
+ struct pcf50633 *pcf = gta02_pcf;
+
+ if (gta02_usb_vbus_draw) {
+ pcf50633_mbc_usb_curlim_set(pcf, gta02_usb_vbus_draw);
+ return;
+ } else {
+#ifdef CONFIG_PCF50633_ADC
+ pcf50633_adc_async_read(pcf,
+ PCF50633_ADCC1_MUX_ADCIN1,
+ PCF50633_ADCC1_AVERAGE_16,
+ gta02_configure_pmu_for_charger, NULL);
+#else
+ /* If the PCF50633 ADC is disabled we fallback to a 100mA limit for safety. */
+ pcf50633_mbc_usb_curlim_set(pcf, 100);
+#endif
+ return;
+ }
+}
+
+#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
+static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
+{
+ if (irq == PCF50633_IRQ_USBINS) {
+ schedule_delayed_work(>a02_charger_work,
+ GTA02_CHARGER_CONFIGURE_TIMEOUT);
+ return;
+ } else if (irq == PCF50633_IRQ_USBREM) {
+ cancel_delayed_work_sync(>a02_charger_work);
+ gta02_usb_vbus_draw = 0;
+ }
+}
+
+static void gta02_pmu_force_shutdown(struct pcf50633 *pcf)
+{
+ pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN,
+ PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
+}
+
+
+static void gta02_udc_vbus_draw(unsigned int ma)
+{
+ if (!gta02_pcf)
+ return;
+
+ gta02_usb_vbus_draw = ma;
+
+ schedule_delayed_work(>a02_charger_work,
+ GTA02_CHARGER_CONFIGURE_TIMEOUT);
+}
+
+static int gta02_udc_vbus_status(void)
+{
+ struct pcf50633 *pcf = gta02_pcf;
+ if (!gta02_pcf)
+ return -ENODEV;
+
+ return !!(pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE);
+}
+
+#else /* !CONFIG_CHARGER_PCF50633 */
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+#define gta02_get_charger_online_status NULL
+#define gta02_get_charger_active_status NULL
+#endif
+#define gta02_pmu_event_callback NULL
+#define gta02_udc_vbus_draw NULL
+#define gta02_udc_vbus_status NULL
+#endif
+
+
+static struct platform_device gta02_pm_gps_dev = {
+ .name = "gta02-pm-gps",
+};
+
+static struct platform_device gta02_pm_bt_dev = {
+ .name = "gta02-pm-bt",
+};
+
+static struct platform_device gta02_pm_gsm_dev = {
+ .name = "gta02-pm-gsm",
+};
+
+static struct platform_device gta02_pm_wlan_dev = {
+ .name = "gta02-pm-wlan",
+};
+
+/* this is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device. Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent. This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static struct platform_device gta02_glamo_dev;
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
+static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id);
+
+static struct regulator_consumer_supply ldo4_consumers[] = {
+ {
+ .dev = >a02_pm_bt_dev.dev,
+ .supply = "BT_3V2",
+ },
+};
+
+static struct regulator_consumer_supply ldo5_consumers[] = {
+ {
+ .dev = >a02_pm_gps_dev.dev,
+ .supply = "RF_3V",
+ },
+};
+
+static struct regulator_consumer_supply hcldo_consumers[] = {
+ {
+ .dev = >a02_glamo_dev.dev,
+ .supply = "SD_3V3",
+ },
+};
+
+static struct regulator_consumer_supply ldo6_consumers[] = {
+ { .supply = "VDC" },
+ { .supply = "VDDIO" },
+};
+
+static char *gta02_batteries[] = {
+ "battery",
+};
+
+#ifdef CONFIG_CHARGER_PCF50633
+
+struct pcf50633_platform_data gta02_pcf_pdata = {
+ .resumers = {
+ [0] = PCF50633_INT1_USBINS |
+ PCF50633_INT1_USBREM |
+ PCF50633_INT1_ALARM,
+ [1] = PCF50633_INT2_ONKEYF,
+ [2] = PCF50633_INT3_ONKEY1S,
+ [3] = PCF50633_INT4_LOWSYS |
+ PCF50633_INT4_LOWBAT |
+ PCF50633_INT4_HIGHTMP,
+ },
+
+ .batteries = gta02_batteries,
+ .num_batteries = ARRAY_SIZE(gta02_batteries),
+ .charging_restart_interval = (900 * HZ),
+ .chg_ref_current_ma = 1000,
+
+ .reg_init_data = {
+ [PCF50633_REGULATOR_AUTO] = {
+ .constraints = {
+ .name = "IO_3V3",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .boot_on = 1,
+ .always_on = 1,
+ .apply_uV = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = 0,
+ },
+ [PCF50633_REGULATOR_DOWN1] = {
+ .constraints = {
+ .name = "CORE_1V3",
+ .min_uV = 1300000,
+ .max_uV = 1600000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .boot_on = 1,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = 0,
+ },
+ [PCF50633_REGULATOR_DOWN2] = {
+ .constraints = {
+ .name = "IO_1V8",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .boot_on = 1,
+ .always_on = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = 0,
+ },
+ [PCF50633_REGULATOR_HCLDO] = {
+ .constraints = {
+ .name = "SD_3V3",
+ .min_uV = 2000000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(hcldo_consumers),
+ .consumer_supplies = hcldo_consumers,
+ },
+ [PCF50633_REGULATOR_LDO1] = {
+ .constraints = {
+ .name = "GSENSOR_3V3",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = 0,
+ },
+ [PCF50633_REGULATOR_LDO2] = {
+ .constraints = {
+ .name = "CODEC_3V3",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = 0,
+ },
+ [PCF50633_REGULATOR_LDO3] = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = 0,
+ },
+ [PCF50633_REGULATOR_LDO4] = {
+ .constraints = {
+ .name = "BT_3V2",
+ .min_uV = 3200000,
+ .max_uV = 3200000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo4_consumers),
+ .consumer_supplies = ldo4_consumers,
+ },
+ [PCF50633_REGULATOR_LDO5] = {
+ .constraints = {
+ .name = "RF_3V",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ .state_mem = {
+ .enabled = 1,
+ },
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo5_consumers),
+ .consumer_supplies = ldo5_consumers,
+ },
+ [PCF50633_REGULATOR_LDO6] = {
+ .constraints = {
+ .name = "LCM_3V",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .always_on = 0,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .apply_uV = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ldo6_consumers),
+ .consumer_supplies = ldo6_consumers,
+ },
+ },
+ .probe_done = gta02_pmu_attach_child_devices,
+ .regulator_registered = gta02_pmu_regulator_registered,
+ .mbc_event_callback = gta02_pmu_event_callback,
+ .force_shutdown = gta02_pmu_force_shutdown,
+};
+
+#endif
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+/* BQ27000 Battery */
+
+struct bq27000_platform_data bq27000_pdata = {
+ .name = "battery",
+ .rsense_mohms = 20,
+ .hdq_read = hdq_read,
+ .hdq_write = hdq_write,
+ .hdq_initialized = hdq_initialized,
+ .get_charger_online_status = gta02_get_charger_online_status,
+ .get_charger_active_status = gta02_get_charger_active_status
+};
+
+struct platform_device bq27000_battery_device = {
+ .name = "bq27000-battery",
+ .dev = {
+ .platform_data = &bq27000_pdata,
+ },
+};
+
+/* HDQ */
+
+static void gta02_hdq_attach_child_devices(struct device *parent_device)
+{
+ switch (S3C_SYSTEM_REV_ATAG) {
+ case GTA02v5_SYSTEM_REV:
+ case GTA02v6_SYSTEM_REV:
+ bq27000_battery_device.dev.parent = parent_device;
+ platform_device_register(&bq27000_battery_device);
+ break;
+ default:
+ break;
+ }
+}
+
+static void gta02_hdq_gpio_direction_out(void)
+{
+ s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
+}
+
+static void gta02_hdq_gpio_direction_in(void)
+{
+ s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
+}
+
+static void gta02_hdq_gpio_set_value(int val)
+{
+
+ s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
+}
+
+static int gta02_hdq_gpio_get_value(void)
+{
+ return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
+}
+
+static struct resource gta02_hdq_resources[] = {
+ [0] = {
+ .start = GTA02v5_GPIO_HDQ,
+ .end = GTA02v5_GPIO_HDQ,
+ },
+};
+
+struct hdq_platform_data gta02_hdq_platform_data = {
+ .attach_child_devices = gta02_hdq_attach_child_devices,
+ .gpio_dir_out = gta02_hdq_gpio_direction_out,
+ .gpio_dir_in = gta02_hdq_gpio_direction_in,
+ .gpio_set = gta02_hdq_gpio_set_value,
+ .gpio_get = gta02_hdq_gpio_get_value,
+
+ .enable_fiq = gta02_fiq_enable,
+ .disable_fiq = gta02_fiq_disable,
+ .kick_fiq = gta02_fiq_kick,
+
+};
+
+struct platform_device gta02_hdq_device = {
+ .name = "hdq",
+ .num_resources = 1,
+ .resource = gta02_hdq_resources,
+ .dev = {
+ .platform_data = >a02_hdq_platform_data,
+ },
+};
+#endif
+
+
+/* vibrator (child of FIQ) */
+
+static struct resource gta02_vibrator_resources[] = {
+ [0] = {
+ .start = GTA02_GPIO_VIBRATOR_ON,
+ .end = GTA02_GPIO_VIBRATOR_ON,
+ },
+};
+struct gta02_vib_platform_data gta02_vib_pdata = {
+ .enable_fiq = gta02_fiq_enable,
+ .disable_fiq = gta02_fiq_disable,
+ .kick_fiq = gta02_fiq_kick,
+};
+
+static struct platform_device gta02_vibrator_dev = {
+ .name = "gta02-vibrator",
+ .num_resources = ARRAY_SIZE(gta02_vibrator_resources),
+ .resource = gta02_vibrator_resources,
+ .dev = {
+ .platform_data = >a02_vib_pdata,
+ },
+};
+
+/* NOR Flash */
+
+#define GTA02_FLASH_BASE S3C2410_CS3 /* GCS3 */
+#define GTA02_FLASH_SIZE 0x200000 /* 2MBytes */
+
+static struct physmap_flash_data gta02_nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource gta02_nor_flash_resource = {
+ .start = GTA02_FLASH_BASE,
+ .end = GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device gta02_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = >a02_nor_flash_data,
+ },
+ .resource = >a02_nor_flash_resource,
+ .num_resources = 1,
+};
+
+
+struct platform_device s3c24xx_pwm_device = {
+ .name = "s3c24xx_pwm",
+ .num_resources = 0,
+};
+
+static struct i2c_board_info gta02_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf50633", 0x73),
+ .irq = GTA02_IRQ_PCF50633,
+ .platform_data = >a02_pcf_pdata,
+ },
+ {
+ I2C_BOARD_INFO("wm8753", 0x1a),
+ },
+};
+
+static struct s3c2410_nand_set gta02_nand_sets[] = {
+ [0] = {
+ .name = "neo1973-nand",
+ .nr_chips = 1,
+ .flags = S3C2410_NAND_BBT,
+ },
+};
+
+/* choose a set of timings derived from S3C@2442B MCP54
+ * data sheet (K5D2G13ACM-D075 MCP Memory)
+ */
+
+static struct s3c2410_platform_nand gta02_nand_info = {
+ .tacls = 0,
+ .twrph0 = 25,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(gta02_nand_sets),
+ .sets = gta02_nand_sets,
+ .software_ecc = 1,
+};
+
+
+static void gta02_s3c_mmc_set_power(unsigned char power_mode,
+ unsigned short vdd)
+{
+ static int is_on = -1;
+ int on;
+
+ on = power_mode == MMC_POWER_ON || power_mode == MMC_POWER_UP;
+ if (is_on != on)
+ gta02_wlan_reset(!on);
+ is_on = on;
+}
+
+
+static struct s3c24xx_mci_pdata gta02_s3c_mmc_cfg = {
+ .set_power = gta02_s3c_mmc_set_power,
+};
+
+static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
+{
+ switch (cmd) {
+ case S3C2410_UDC_P_ENABLE:
+ printk(KERN_DEBUG "%s S3C2410_UDC_P_ENABLE\n", __func__);
+ s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 1);
+ break;
+ case S3C2410_UDC_P_DISABLE:
+ printk(KERN_DEBUG "%s S3C2410_UDC_P_DISABLE\n", __func__);
+ s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 0);
+ break;
+ case S3C2410_UDC_P_RESET:
+ printk(KERN_DEBUG "%s S3C2410_UDC_P_RESET\n", __func__);
+ /* FIXME! */
+ break;
+ default:
+ break;
+ }
+}
+
+/* get PMU to set USB current limit accordingly */
+
+static struct s3c2410_udc_mach_info gta02_udc_cfg = {
+ .vbus_draw = gta02_udc_vbus_draw,
+ .udc_command = gta02_udc_command,
+/* .get_vbus_status = gta02_udc_vbus_status,*/
+};
+
+
+/* Touchscreen configuration. */
+
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+const static struct ts_filter_group_configuration gta02_ts_group = {
+ .length = 12,
+ .close_enough = 10,
+ .threshold = 6, /* At least half of the points in a group. */
+ .attempts = 10,
+};
+
+const static struct ts_filter_median_configuration gta02_ts_median = {
+ .extent = 20,
+ .decimation_below = 3,
+ .decimation_threshold = 8 * 3,
+ .decimation_above = 4,
+};
+
+const static struct ts_filter_mean_configuration gta02_ts_mean = {
+ .length = 4,
+};
+
+const static struct ts_filter_linear_configuration gta02_ts_linear = {
+ .constants = {1, 0, 0, 0, 1, 0, 1}, /* Don't modify coords. */
+ .coord0 = 0,
+ .coord1 = 1,
+};
+#endif
+
+const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
+{
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+ {&ts_filter_group_api, >a02_ts_group.config},
+ {&ts_filter_median_api, >a02_ts_median.config},
+ {&ts_filter_mean_api, >a02_ts_mean.config},
+ {&ts_filter_linear_api, >a02_ts_linear.config},
+#endif
+ {NULL, NULL},
+};
+
+const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
+ .delay = 10000,
+ .presc = 0xff, /* slow as we can go */
+ .filter_config = gta02_filter_configuration,
+};
+
+
+
+static void gta02_bl_set_intensity(int intensity)
+{
+ struct pcf50633 *pcf = gta02_pcf;
+ int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+ int ret;
+
+ /*
+ * One code path that leads here is from a kernel panic. Trying to turn
+ * the backlight on just gives us a nearly endless stream of complaints
+ * and accomplishes nothing. We can't win. Just give up.
+ *
+ * In the unlikely event that there's another path leading here while
+ * we're atomic, we print at least a warning.
+ */
+ if (in_atomic()) {
+ printk(KERN_ERR
+ "gta02_bl_set_intensity called while atomic\n");
+ return;
+ }
+
+ if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
+ old_intensity = 0;
+ else
+ old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+
+ if (intensity == old_intensity)
+ return;
+
+ /* We can't do this anywhere else */
+ pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
+
+ /*
+ * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
+ * if seen, you have to re-enable the LED unit
+ */
+ if (!intensity || !old_intensity)
+ pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
+
+ if (!intensity) /* illegal to set LEDOUT to 0 */
+ ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
+ 2);
+ else
+ ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
+ intensity);
+
+ if (intensity)
+ pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
+
+}
+
+static struct generic_bl_info gta02_bl_info = {
+ .name = "gta02-bl",
+ .max_intensity = 0x3f,
+ .default_intensity = 0x3f,
+ .set_bl_intensity = gta02_bl_set_intensity,
+};
+
+static struct platform_device gta02_bl_dev = {
+ .name = "generic-bl",
+ .id = 1,
+ .dev = {
+ .platform_data = >a02_bl_info,
+ },
+};
+
+/* SPI: LCM control interface attached to Glamo3362 */
+
+static void gta02_jbt6k74_reset(int devidx, int level)
+{
+ gpio_set_value(GTA02_GPIO_GLAMO(4), level);
+}
+
+static int jbt_probed = 0;
+
+static void gta02_jbt6k74_probe_completed(struct device *dev)
+{
+ struct pcf50633 *pcf = gta02_pcf;
+ if (!jbt_probed) {
+ /* Switch on backlight. Qi does not do it for us */
+ pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01);
+ pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
+ pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01);
+ pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01);
+
+ gta02_bl_dev.dev.parent = dev;
+ platform_device_register(>a02_bl_dev);
+ jbt_probed = 1;
+ }
+}
+
+const struct jbt6k74_platform_data jbt6k74_pdata = {
+ .reset = gta02_jbt6k74_reset,
+ .probe_completed = gta02_jbt6k74_probe_completed,
+};
+
+/*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */
+
+void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
+{
+ struct lis302dl_platform_data *pdata = lis->pdata;
+
+ if (!resume) {
+ /*
+ * we don't want to power them with a high level
+ * because GSENSOR_3V3 is not up during suspend
+ */
+ s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
+ s3c2410_gpio_setpin(pdata->pin_clk, 0);
+ s3c2410_gpio_setpin(pdata->pin_mosi, 0);
+ /* misnomer: it is a pullDOWN in 2442 */
+ s3c2410_gpio_pullup(pdata->pin_miso, 1);
+ return;
+ }
+
+ /* back to normal */
+ s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
+ s3c2410_gpio_setpin(pdata->pin_clk, 1);
+ /* misnomer: it is a pullDOWN in 2442 */
+ s3c2410_gpio_pullup(pdata->pin_miso, 0);
+
+ s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
+
+}
+
+struct lis302dl_platform_data lis302_pdata_top = {
+ .name = "lis302-1 (top)",
+ .pin_chip_select= S3C2410_GPD(12),
+ .pin_clk = S3C2410_GPG(7),
+ .pin_mosi = S3C2410_GPG(6),
+ .pin_miso = S3C2410_GPG(5),
+ .interrupt = GTA02_IRQ_GSENSOR_1,
+ .open_drain = 1, /* altered at runtime by PCB rev */
+ .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
+};
+
+struct lis302dl_platform_data lis302_pdata_bottom = {
+ .name = "lis302-2 (bottom)",
+ .pin_chip_select= S3C2410_GPD(13),
+ .pin_clk = S3C2410_GPG(7),
+ .pin_mosi = S3C2410_GPG(6),
+ .pin_miso = S3C2410_GPG(5),
+ .interrupt = GTA02_IRQ_GSENSOR_2,
+ .open_drain = 1, /* altered at runtime by PCB rev */
+ .lis302dl_suspend_io = gta02_lis302dl_suspend_io,
+};
+
+static struct spi_board_info gta02_spi_board_info[] = {
+ {
+ .modalias = "jbt6k74",
+ .platform_data = &jbt6k74_pdata,
+ .controller_data = (void*)GTA02_GPIO_GLAMO(12),
+ /* irq */
+ .max_speed_hz = 100 * 1000,
+ .bus_num = 2,
+ .chip_select = 0
+ },
+ {
+ .modalias = "lis302dl",
+ /* platform_data */
+ .platform_data = &lis302_pdata_top,
+ /* controller_data */
+ /* irq */
+ .max_speed_hz = 100 * 1000,
+ .bus_num = 3,
+ .chip_select = 0,
+ },
+
+ {
+ .modalias = "lis302dl",
+ /* platform_data */
+ .platform_data = &lis302_pdata_bottom,
+ /* controller_data */
+ /* irq */
+ .max_speed_hz = 100 * 1000,
+ .bus_num = 3,
+ .chip_select = 1,
+ },
+
+};
+
+static void gta02_lis302_chip_select(struct s3c2410_spigpio_info *info, int csid, int cs)
+{
+
+ /*
+ * Huh... "quirk"... CS on this device is not really "CS" like you can
+ * expect.
+ *
+ * When it is 0 it selects SPI interface mode.
+ * When it is 1 it selects I2C interface mode.
+ *
+ * Because we have 2 devices on one interface we have to make sure
+ * that the "disabled" device (actually in I2C mode) don't think we're
+ * talking to it.
+ *
+ * When we talk to the "enabled" device, the "disabled" device sees
+ * the clocks as I2C clocks, creating havoc.
+ *
+ * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
+ * must ensure this is never issued.
+ */
+
+ int cs_gpio, other_cs_gpio;
+
+ cs_gpio = csid ? S3C2410_GPD(13) : S3C2410_GPD(12);
+ other_cs_gpio = csid ? S3C2410_GPD(12) : S3C2410_GPD(13);
+
+
+ if (cs == BITBANG_CS_ACTIVE) {
+ s3c2410_gpio_setpin(other_cs_gpio, 1);
+ s3c2410_gpio_setpin(cs_gpio, 1);
+ s3c2410_gpio_setpin(info->pin_clk, 1);
+ s3c2410_gpio_setpin(cs_gpio, 0);
+ } else {
+ s3c2410_gpio_setpin(cs_gpio, 1);
+ s3c2410_gpio_setpin(other_cs_gpio, 1);
+ }
+}
+
+static struct s3c2410_spigpio_info gta02_spigpio_cfg = {
+ .pin_clk = S3C2410_GPG(7),
+ .pin_mosi = S3C2410_GPG(6),
+ .pin_miso = S3C2410_GPG(5),
+ .bus_num = 3,
+ .num_chipselect = 2,
+ .chip_select = gta02_lis302_chip_select,
+};
+
+static struct platform_device gta02_spi_gpio_dev = {
+ .name = "spi_s3c24xx_gpio",
+ .dev = {
+ .platform_data = >a02_spigpio_cfg,
+ },
+};
+
+/*----------- / SPI: Accelerometers attached to SPI of s3c244x ----------------- */
+
+static struct gpio_led gta02_gpio_leds[] = {
+ {
+ .name = "gta02-power:orange",
+ .gpio = GTA02_GPIO_PWR_LED1,
+ }, {
+ .name = "gta02-power:blue",
+ .gpio = GTA02_GPIO_PWR_LED2,
+ }, {
+ .name = "gta02-aux:red",
+ .gpio = GTA02_GPIO_AUX_LED,
+ },
+};
+
+static struct gpio_led_platform_data gta02_gpio_leds_pdata = {
+ .leds = gta02_gpio_leds,
+ .num_leds = ARRAY_SIZE(gta02_gpio_leds),
+};
+
+struct platform_device gta02_led_dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = >a02_gpio_leds_pdata,
+ },
+};
+
+static struct gpio_keys_button gta02_buttons[] = {
+ {
+ .gpio = GTA02_GPIO_AUX_KEY,
+ .code = KEY_PHONE,
+ .desc = "Aux",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+ {
+ .gpio = GTA02_GPIO_HOLD_KEY,
+ .code = KEY_PAUSE,
+ .desc = "Hold",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+ .buttons = gta02_buttons,
+ .nbuttons = ARRAY_SIZE(gta02_buttons),
+};
+
+static struct platform_device gta02_button_dev = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = >a02_buttons_pdata,
+ },
+};
+
+static struct platform_device gta02_pm_usbhost_dev = {
+ .name = "gta02-pm-host",
+};
+
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info = {
+ .port[0] = {
+ .flags = S3C_HCDFLG_USED,
+ },
+ .port[1] = {
+ .flags = 0,
+ },
+};
+
+/*
+ * we crank down SD Card clock dynamically when GPS is powered
+ */
+
+static int gta02_glamo_mci_use_slow(void)
+{
+ return gta02_pm_gps_is_on();
+}
+
+static void gta02_glamo_external_reset(int level)
+{
+ s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
+ s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
+}
+
+/*
+static struct fb_videomode gta02_glamo_modes[] = {
+ {
+ .name = "480x640",
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 40816,
+ .left_margin = 8,
+ .right_margin = 63,
+ .upper_margin = 2,
+ .lower_margin = 4,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }, {
+ .name = "240x320",
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 40816,
+ .left_margin = 8,
+ .right_margin = 88,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }
+};*/
+
+struct spi_gpio_platform_data spigpio_platform_data = {
+ .sck = GTA02_GPIO_GLAMO(10),
+ .mosi = GTA02_GPIO_GLAMO(11),
+ .miso = GTA02_GPIO_GLAMO(5),
+ .num_chipselect = 1,
+};
+
+static struct platform_device spigpio_device = {
+ .name = "spi_gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &spigpio_platform_data,
+ },
+};
+
+static void gta02_glamo_registered(struct device *dev)
+{
+ if (gpio_request(GTA02_GPIO_GLAMO(4), "jbt6k74 reset"))
+ printk("gta02: Failed to request jbt6k74 reset pin\n");
+ if (gpio_direction_output(GTA02_GPIO_GLAMO(4), 1))
+ printk("gta02: Failed to configure jbt6k74 reset pin\n");
+ spigpio_device.dev.parent = dev;
+ platform_device_register(&spigpio_device);
+}
+
+static struct fb_videomode gta02_glamo_modes[] = {
+ {
+ .name = "480x640",
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 40816,
+ .left_margin = 8,
+ .right_margin = 16,
+ .upper_margin = 2,
+ .lower_margin = 16,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }, {
+ .name = "240x320",
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 40816,
+ .left_margin = 8,
+ .right_margin = 16,
+ .upper_margin = 2,
+ .lower_margin = 16,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }
+};
+
+
+static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
+ .width = 43,
+ .height = 58,
+
+ .num_modes = ARRAY_SIZE(gta02_glamo_modes),
+ .modes = gta02_glamo_modes,
+};
+
+static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = {
+ .glamo_mmc_use_slow = gta02_glamo_mci_use_slow,
+};
+
+static struct glamo_platform_data gta02_glamo_pdata = {
+ .fb_data = >a02_glamo_fb_pdata,
+ .mmc_data = >a02_glamo_mmc_pdata,
+ .gpio_base = GTA02_GPIO_GLAMO_BASE,
+
+ .osci_clock_rate = 32768,
+
+ .glamo_external_reset = gta02_glamo_external_reset,
+ .registered = gta02_glamo_registered,
+};
+
+static struct resource gta02_glamo_resources[] = {
+ [0] = {
+ .start = S3C2410_CS1,
+ .end = S3C2410_CS1 + 0x1000000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = GTA02_IRQ_3D,
+ .end = GTA02_IRQ_3D,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = GTA02_GPIO_3D_RESET,
+ .end = GTA02_GPIO_3D_RESET,
+ },
+};
+
+static struct platform_device gta02_glamo_dev = {
+ .name = "glamo3362",
+ .num_resources = ARRAY_SIZE(gta02_glamo_resources),
+ .resource = gta02_glamo_resources,
+ .dev = {
+ .platform_data = >a02_glamo_pdata,
+ },
+};
+
+static void __init gta02_map_io(void)
+{
+ s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+}
+
+static irqreturn_t gta02_modem_irq(int irq, void *param)
+{
+/* printk(KERN_DEBUG "modem wakeup interrupt\n");*/
+ gta_gsm_interrupts++;
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ar6000_wow_irq(int irq, void *param)
+{
+/* printk(KERN_DEBUG "ar6000_wow interrupt\n");*/
+ return IRQ_HANDLED;
+}
+
+/*
+ * hardware_ecc=1|0
+ */
+static char hardware_ecc_str[4] __initdata = "";
+
+static int __init hardware_ecc_setup(char *str)
+{
+ if (str)
+ strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str));
+ return 1;
+}
+
+__setup("hardware_ecc=", hardware_ecc_setup);
+
+/* these are the guys that don't need to be children of PMU */
+
+static struct platform_device *gta02_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_usb,
+ &s3c_device_wdt,
+ &s3c_device_sdi,
+ &s3c_device_usbgadget,
+ &s3c_device_nand,
+ >a02_nor_flash,
+
+ &s3c24xx_pwm_device,
+ >a02_led_dev,
+ >a02_pm_wlan_dev, /* not dependent on PMU */
+ &s3c_device_iis,
+};
+
+/* these guys DO need to be children of PMU */
+
+static struct platform_device *gta02_devices_pmu_children[] = {
+ &s3c_device_ts, /* input 1 */
+ >a02_pm_gsm_dev,
+ >a02_pm_usbhost_dev,
+ >a02_spi_gpio_dev, /* input 2 and 3 */
+ >a02_button_dev, /* input 4 */
+ >a02_resume_reason_device,
+};
+
+static void gta02_register_glamo(void)
+{
+ platform_device_register(>a02_glamo_dev);
+}
+
+static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
+{
+ struct platform_device *regulator, *pdev;
+
+ gta02_pcf = pcf;
+
+ regulator = pcf->regulator_pdev[id];
+
+ switch(id) {
+ case PCF50633_REGULATOR_LDO4:
+ pdev = >a02_pm_bt_dev;
+ break;
+ case PCF50633_REGULATOR_LDO5:
+ pdev = >a02_pm_gps_dev;
+ break;
+ case PCF50633_REGULATOR_HCLDO:
+ gta02_register_glamo();
+ return;
+ default:
+ return;
+ }
+
+ pdev->dev.parent = ®ulator->dev;
+ platform_device_register(pdev);
+}
+
+/* this is called when pc50633 is probed, unfortunately quite late in the
+ * day since it is an I2C bus device. Here we can belatedly define some
+ * platform devices with the advantage that we can mark the pcf50633 as the
+ * parent. This makes them get suspended and resumed with their parent
+ * the pcf50633 still around.
+ */
+
+static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
+{
+ int n;
+
+ for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
+ gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
+
+ platform_add_devices(gta02_devices_pmu_children,
+ ARRAY_SIZE(gta02_devices_pmu_children));
+
+ regulator_has_full_constraints();
+}
+
+static void gta02_poweroff(void)
+{
+ pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN,
+ PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
+}
+
+
+/* On hardware rev 5 and earlier the leds are missing a resistor and reading
+ * from their gpio pins will always return 0, so we have to shadow the
+ * led states software */
+static unsigned long gpb_shadow;
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static void gta02_gpb_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB(0));
+ unsigned long flags;
+ unsigned long dat;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04) | gpb_shadow;
+ dat &= ~(1 << offset);
+ gpb_shadow &= ~(1 << offset);
+ if (value) {
+ dat |= 1 << offset;
+ switch (offset) {
+ case 0 ... 2:
+ gpb_shadow |= 1 << offset;
+ break;
+ default:
+ break;
+ }
+ }
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+}
+
+static int gta02_gpb_get(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB(0));
+ unsigned long val;
+
+ val = __raw_readl(base + 0x04) | gpb_shadow;
+ val >>= offset;
+ val &= 1;
+
+ return val;
+}
+
+static void gta02_hijack_gpb(void) {
+ s3c24xx_gpios[1].chip.set = gta02_gpb_set;
+ s3c24xx_gpios[1].chip.get = gta02_gpb_get;
+}
+
+static void __init gta02_machine_init(void)
+{
+ int rc;
+
+ /* set the panic callback to make AUX blink fast */
+ panic_blink = gta02_panic_blink;
+
+ switch (S3C_SYSTEM_REV_ATAG) {
+ case GTA02v6_SYSTEM_REV:
+ /* we need push-pull interrupt from motion sensors */
+ lis302_pdata_top.open_drain = 0;
+ lis302_pdata_bottom.open_drain = 0;
+ break;
+ default:
+ break;
+ }
+ if (S3C_SYSTEM_REV_ATAG <= GTA02v5_SYSTEM_REV)
+ gta02_hijack_gpb();
+
+#ifdef CONFIG_CHARGER_PCF50633
+ INIT_DELAYED_WORK(>a02_charger_work, gta02_charger_worker);
+#endif
+
+ /* Glamo chip select optimization */
+/* *((u32 *)(S3C2410_MEMREG(((1 + 1) << 2)))) = 0x1280; */
+
+ /* do not force soft ecc if we are asked to use hardware_ecc */
+ if (hardware_ecc_str[0] == '1')
+ gta02_nand_info.software_ecc = 0;
+
+ s3c_device_usb.dev.platform_data = >a02_usb_info;
+ s3c_device_nand.dev.platform_data = >a02_nand_info;
+ s3c_device_sdi.dev.platform_data = >a02_s3c_mmc_cfg;
+
+ /* acc sensor chip selects */
+ s3c2410_gpio_setpin(S3C2410_GPD(12), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(12), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPD(13), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(13), S3C2410_GPIO_OUTPUT);
+
+
+ s3c24xx_udc_set_platdata(>a02_udc_cfg);
+ s3c_i2c0_set_platdata(NULL);
+ set_s3c2410ts_info(>a02_ts_cfg);
+
+ i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+ spi_register_board_info(gta02_spi_board_info,
+ ARRAY_SIZE(gta02_spi_board_info));
+
+ platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+
+ s3c_pm_init();
+
+ /* Make sure the modem can wake us up */
+ set_irq_type(GTA02_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
+ rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED,
+ "modem", NULL);
+ if (rc < 0)
+ printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n");
+ enable_irq_wake(GTA02_IRQ_MODEM);
+
+ /* Make sure the wifi module can wake us up*/
+ set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQ_TYPE_EDGE_RISING);
+ rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED,
+ "ar6000", NULL);
+
+ if (rc < 0)
+ printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n");
+ enable_irq_wake(GTA02_IRQ_WLAN_GPIO1);
+
+ pm_power_off = gta02_poweroff;
+
+ /* Register the HDQ and vibrator as children of pwm device */
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+ gta02_hdq_device.dev.parent = &s3c24xx_pwm_device.dev;
+ platform_device_register(>a02_hdq_device);
+#endif
+ gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev;
+ platform_device_register(>a02_vibrator_dev);
+}
+
+MACHINE_START(NEO1973_GTA02, "GTA02")
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = gta02_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = gta02_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+config AR6000_WLAN
+ tristate "AR6000 wireless networking over SDIO"
+ depends on MMC
+ select WIRELESS_EXT
+ default m
+ help
+ good luck.
+
+config AR6000_WLAN_DEBUG
+ bool "Enable retrieval of firmware debugging information"
+ depends on AR6000_WLAN
+ default n
+ help
+ The AR6k firmware maintains a log of debugging events that
+ gets flushed to the host on various occasions. Retrieval of
+ this data is very slow, taking several seconds.
+
+ If in doubt, say N.
+
+config AR6000_WLAN_RESET
+ bool "Soft-reset when shutting down"
+ depends on AR6000_WLAN
+ default n
+ help
+ The AR6k module can be explicitly reset when shutting down
+ the device. This adds a delay of about two seconds to suspend,
+ module removal, and so on. Since the WLAN SDIO function is
+ generally disabled soon thereafter anyway, this reset seems
+ superfluous.
+
+ If in doubt, say N.
--- /dev/null
+REV ?= 2
+
+PWD := $(shell pwd)
+
+EXTRA_CFLAGS += -I$(src)/include
+
+EXTRA_CFLAGS += -DLINUX -D__KERNEL__ -DHTC_RAW_INTERFACE\
+ -DTCMD -DUSER_KEYS \
+ -DNO_SYNC_FLUSH #\
+ -DMULTIPLE_FRAMES_PER_INTERRUPT -DAR6000REV$(REV) \
+ -DBLOCK_TX_PATH_FLAG \
+ -DSDIO \
+
+EXTRA_CFLAGS += -DKERNEL_2_6
+
+obj-$(CONFIG_AR6000_WLAN) += ar6000.o
+
+ar6000-objs += htc/ar6k.o \
+ htc/ar6k_events.o \
+ htc/htc_send.o \
+ htc/htc_recv.o \
+ htc/htc_services.o \
+ htc/htc.o \
+ hif/hif2.o \
+ bmi/bmi.o \
+ ar6000/ar6000_drv.o \
+ ar6000/ar6000_raw_if.o \
+ ar6000/netbuf.o \
+ ar6000/wireless_ext.o \
+ ar6000/ioctl.o \
+ miscdrv/common_drv.o \
+ miscdrv/credit_dist.o \
+ wmi/wmi.o \
+ wlan/wlan_node.o \
+ wlan/wlan_recv_beacon.o \
+ wlan/wlan_utils.o
+
+
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * This driver is a pseudo ethernet driver to access the Atheros AR6000
+ * WLAN Device
+ */
+static const char athId[] __attribute__ ((unused)) = "$Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/ar6000_drv.c#2 $";
+
+#include "ar6000_drv.h"
+#include "htc.h"
+
+MODULE_LICENSE("GPL and additional rights");
+
+#ifndef REORG_APTC_HEURISTICS
+#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+#endif /* REORG_APTC_HEURISTICS */
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+#define APTC_TRAFFIC_SAMPLING_INTERVAL 100 /* msec */
+#define APTC_UPPER_THROUGHPUT_THRESHOLD 3000 /* Kbps */
+#define APTC_LOWER_THROUGHPUT_THRESHOLD 2000 /* Kbps */
+
+typedef struct aptc_traffic_record {
+ A_BOOL timerScheduled;
+ struct timeval samplingTS;
+ unsigned long bytesReceived;
+ unsigned long bytesTransmitted;
+} APTC_TRAFFIC_RECORD;
+
+A_TIMER aptcTimer;
+APTC_TRAFFIC_RECORD aptcTR;
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+unsigned int bypasswmi = 0;
+unsigned int debuglevel = 0;
+int tspecCompliance = 1;
+unsigned int busspeedlow = 0;
+unsigned int onebitmode = 0;
+unsigned int skipflash = 0;
+unsigned int wmitimeout = 2;
+unsigned int wlanNodeCaching = 1;
+unsigned int enableuartprint = 0;
+unsigned int logWmiRawMsgs = 0;
+unsigned int enabletimerwar = 0;
+unsigned int mbox_yield_limit = 99;
+int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF;
+int allow_trace_signal = 0;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+unsigned int testmode =0;
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(bypasswmi, int, 0644);
+module_param(debuglevel, int, 0644);
+module_param(tspecCompliance, int, 0644);
+module_param(onebitmode, int, 0644);
+module_param(busspeedlow, int, 0644);
+module_param(skipflash, int, 0644);
+module_param(wmitimeout, int, 0644);
+module_param(wlanNodeCaching, int, 0644);
+module_param(logWmiRawMsgs, int, 0644);
+module_param(enableuartprint, int, 0644);
+module_param(enabletimerwar, int, 0644);
+module_param(mbox_yield_limit, int, 0644);
+module_param(reduce_credit_dribble, int, 0644);
+module_param(allow_trace_signal, int, 0644);
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+module_param(testmode, int, 0644);
+#endif
+#else
+
+#define __user
+/* for linux 2.4 and lower */
+MODULE_PARM(bypasswmi,"i");
+MODULE_PARM(debuglevel, "i");
+MODULE_PARM(onebitmode,"i");
+MODULE_PARM(busspeedlow, "i");
+MODULE_PARM(skipflash, "i");
+MODULE_PARM(wmitimeout, "i");
+MODULE_PARM(wlanNodeCaching, "i");
+MODULE_PARM(enableuartprint,"i");
+MODULE_PARM(logWmiRawMsgs, "i");
+MODULE_PARM(enabletimerwar,"i");
+MODULE_PARM(mbox_yield_limit,"i");
+MODULE_PARM(reduce_credit_dribble,"i");
+MODULE_PARM(allow_trace_signal,"i");
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+MODULE_PARM(testmode, "i");
+#endif
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
+/* in 2.6.10 and later this is now a pointer to a uint */
+unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX;
+#define mboxnum &_mboxnum
+#else
+unsigned int mboxnum = HTC_MAILBOX_NUM_MAX;
+#endif
+
+#ifdef CONFIG_AR6000_WLAN_RESET
+unsigned int resetok = 1;
+#else
+unsigned int resetok = 0;
+#endif
+
+#ifdef DEBUG
+A_UINT32 g_dbg_flags = DBG_DEFAULTS;
+unsigned int debugflags = 0;
+int debugdriver = 1;
+unsigned int debughtc = 128;
+unsigned int debugbmi = 1;
+unsigned int debughif = 2;
+unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0};
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(debugflags, int, 0644);
+module_param(debugdriver, int, 0644);
+module_param(debughtc, int, 0644);
+module_param(debugbmi, int, 0644);
+module_param(debughif, int, 0644);
+module_param(resetok, int, 0644);
+module_param_array(txcreditsavailable, int, mboxnum, 0644);
+module_param_array(txcreditsconsumed, int, mboxnum, 0644);
+module_param_array(txcreditintrenable, int, mboxnum, 0644);
+module_param_array(txcreditintrenableaggregate, int, mboxnum, 0644);
+#else
+/* linux 2.4 and lower */
+MODULE_PARM(debugflags,"i");
+MODULE_PARM(debugdriver, "i");
+MODULE_PARM(debughtc, "i");
+MODULE_PARM(debugbmi, "i");
+MODULE_PARM(debughif, "i");
+MODULE_PARM(resetok, "i");
+MODULE_PARM(txcreditsavailable, "0-3i");
+MODULE_PARM(txcreditsconsumed, "0-3i");
+MODULE_PARM(txcreditintrenable, "0-3i");
+MODULE_PARM(txcreditintrenableaggregate, "0-3i");
+#endif
+
+#endif /* DEBUG */
+
+unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0};
+unsigned int hifBusRequestNumMax = 40;
+unsigned int war23838_disabled = 0;
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+unsigned int enableAPTCHeuristics = 1;
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param_array(tx_attempt, int, mboxnum, 0644);
+module_param_array(tx_post, int, mboxnum, 0644);
+module_param_array(tx_complete, int, mboxnum, 0644);
+module_param(hifBusRequestNumMax, int, 0644);
+module_param(war23838_disabled, int, 0644);
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+module_param(enableAPTCHeuristics, int, 0644);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#else
+MODULE_PARM(tx_attempt, "0-3i");
+MODULE_PARM(tx_post, "0-3i");
+MODULE_PARM(tx_complete, "0-3i");
+MODULE_PARM(hifBusRequestNumMax, "i");
+MODULE_PARM(war23838_disabled, "i");
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+MODULE_PARM(enableAPTCHeuristics, "i");
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+#endif
+
+#ifdef BLOCK_TX_PATH_FLAG
+int blocktx = 0;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+module_param(blocktx, int, 0644);
+#else
+MODULE_PARM(blocktx, "i");
+#endif
+#endif /* BLOCK_TX_PATH_FLAG */
+
+// TODO move to arsoft_c
+USER_RSSI_THOLD rssi_map[12];
+
+int reconnect_flag = 0;
+
+DECLARE_WAIT_QUEUE_HEAD(ar6000_scan_queue);
+
+/* Function declarations */
+static int ar6000_init_module(void);
+static void ar6000_cleanup_module(void);
+
+int ar6000_init(struct net_device *dev);
+static int ar6000_open(struct net_device *dev);
+static int ar6000_close(struct net_device *dev);
+static int ar6000_cleanup(struct net_device *dev);
+static void ar6000_init_control_info(AR_SOFTC_T *ar);
+static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev);
+
+static void ar6000_destroy(struct net_device *dev, unsigned int unregister);
+static void ar6000_detect_error(unsigned long ptr);
+static struct net_device_stats *ar6000_get_stats(struct net_device *dev);
+static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev);
+
+/*
+ * HTC service connection handlers
+ */
+static void ar6000_avail_ev(HTC_HANDLE HTCHandle);
+
+static void ar6000_unavail_ev(void *Instance);
+
+static void ar6000_target_failure(void *Instance, A_STATUS Status);
+
+static void ar6000_rx(void *Context, HTC_PACKET *pPacket);
+
+static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint);
+
+static void ar6000_tx_complete(void *Context, HTC_PACKET *pPacket);
+
+static void ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint);
+
+static void ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint);
+
+/*
+ * Static variables
+ */
+
+static struct net_device *ar6000_devices[MAX_AR6000];
+extern struct iw_handler_def ath_iw_handler_def;
+DECLARE_WAIT_QUEUE_HEAD(arEvent);
+static void ar6000_cookie_init(AR_SOFTC_T *ar);
+static void ar6000_cookie_cleanup(AR_SOFTC_T *ar);
+static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie);
+static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar);
+static void ar6000_TxDataCleanup(AR_SOFTC_T *ar);
+
+#ifdef USER_KEYS
+static A_STATUS ar6000_reinstall_keys(AR_SOFTC_T *ar,A_UINT8 key_op_ctrl);
+#endif
+
+
+static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM];
+
+#define HOST_INTEREST_ITEM_ADDRESS(ar, item) \
+((ar->arTargetType == TARGET_TYPE_AR6001) ? \
+ AR6001_HOST_INTEREST_ITEM_ADDRESS(item) : \
+ AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
+
+
+/* Debug log support */
+
+/*
+ * Flag to govern whether the debug logs should be parsed in the kernel
+ * or reported to the application.
+ */
+#ifdef DEBUG
+#define REPORT_DEBUG_LOGS_TO_APP
+#endif
+
+A_STATUS
+ar6000_set_host_app_area(AR_SOFTC_T *ar)
+{
+ A_UINT32 address, data;
+ struct host_app_area_s host_app_area;
+
+ /* Fetch the address of the host_app_area_s instance in the host interest area */
+ address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest);
+ if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) {
+ return A_ERROR;
+ }
+ address = data;
+ host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION;
+ if (ar6000_WriteDataDiag(ar->arHifDevice, address,
+ (A_UCHAR *)&host_app_area,
+ sizeof(struct host_app_area_s)) != A_OK)
+ {
+ return A_ERROR;
+ }
+
+ return A_OK;
+}
+
+A_UINT32
+dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar)
+{
+ A_UINT32 param;
+ A_UINT32 address;
+ A_STATUS status;
+
+ address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr);
+ if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address,
+ (A_UCHAR *)¶m, 4)) != A_OK)
+ {
+ param = 0;
+ }
+
+ return param;
+}
+
+/*
+ * The dbglog module has been initialized. Its ok to access the relevant
+ * data stuctures over the diagnostic window.
+ */
+void
+ar6000_dbglog_init_done(AR_SOFTC_T *ar)
+{
+ ar->dbglog_init_done = TRUE;
+}
+
+A_UINT32
+dbglog_get_debug_fragment(A_INT8 *datap, A_UINT32 len, A_UINT32 limit)
+{
+ A_INT32 *buffer;
+ A_UINT32 count;
+ A_UINT32 numargs;
+ A_UINT32 length;
+ A_UINT32 fraglen;
+
+ count = fraglen = 0;
+ buffer = (A_INT32 *)datap;
+ length = (limit >> 2);
+
+ if (len <= limit) {
+ fraglen = len;
+ } else {
+ while (count < length) {
+ numargs = DBGLOG_GET_NUMARGS(buffer[count]);
+ fraglen = (count << 2);
+ count += numargs + 1;
+ }
+ }
+
+ return fraglen;
+}
+
+void
+dbglog_parse_debug_logs(A_INT8 *datap, A_UINT32 len)
+{
+ A_INT32 *buffer;
+ A_UINT32 count;
+ A_UINT32 timestamp;
+ A_UINT32 debugid;
+ A_UINT32 moduleid;
+ A_UINT32 numargs;
+ A_UINT32 length;
+
+ count = 0;
+ buffer = (A_INT32 *)datap;
+ length = (len >> 2);
+ while (count < length) {
+ debugid = DBGLOG_GET_DBGID(buffer[count]);
+ moduleid = DBGLOG_GET_MODULEID(buffer[count]);
+ numargs = DBGLOG_GET_NUMARGS(buffer[count]);
+ timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]);
+ switch (numargs) {
+ case 0:
+ AR_DEBUG_PRINTF("%d %d (%d)\n", moduleid, debugid, timestamp);
+ break;
+
+ case 1:
+ AR_DEBUG_PRINTF("%d %d (%d): 0x%x\n", moduleid, debugid,
+ timestamp, buffer[count+1]);
+ break;
+
+ case 2:
+ AR_DEBUG_PRINTF("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid,
+ timestamp, buffer[count+1], buffer[count+2]);
+ break;
+
+ default:
+ AR_DEBUG_PRINTF("Invalid args: %d\n", numargs);
+ }
+ count += numargs + 1;
+ }
+}
+
+int
+ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar)
+{
+ struct dbglog_hdr_s debug_hdr;
+ struct dbglog_buf_s debug_buf;
+ A_UINT32 address;
+ A_UINT32 length;
+ A_UINT32 dropped;
+ A_UINT32 firstbuf;
+ A_UINT32 debug_hdr_ptr;
+
+ if (!ar->dbglog_init_done) return A_ERROR;
+
+#ifndef CONFIG_AR6000_WLAN_DEBUG
+ return 0;
+#endif
+
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ if (ar->dbgLogFetchInProgress) {
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ return A_EBUSY;
+ }
+
+ /* block out others */
+ ar->dbgLogFetchInProgress = TRUE;
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+ debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar);
+ printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr);
+
+ /* Get the contents of the ring buffer */
+ if (debug_hdr_ptr) {
+ address = debug_hdr_ptr;
+ length = sizeof(struct dbglog_hdr_s);
+ ar6000_ReadDataDiag(ar->arHifDevice, address,
+ (A_UCHAR *)&debug_hdr, length);
+ address = (A_UINT32)debug_hdr.dbuf;
+ firstbuf = address;
+ dropped = debug_hdr.dropped;
+ length = sizeof(struct dbglog_buf_s);
+ ar6000_ReadDataDiag(ar->arHifDevice, address,
+ (A_UCHAR *)&debug_buf, length);
+
+ do {
+ address = (A_UINT32)debug_buf.buffer;
+ length = debug_buf.length;
+ if ((length) && (debug_buf.length <= debug_buf.bufsize)) {
+ /* Rewind the index if it is about to overrun the buffer */
+ if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) {
+ ar->log_cnt = 0;
+ }
+ if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
+ (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length))
+ {
+ break;
+ }
+ ar6000_dbglog_event(ar, dropped, &ar->log_buffer[ar->log_cnt], length);
+ ar->log_cnt += length;
+ } else {
+ AR_DEBUG_PRINTF("Length: %d (Total size: %d)\n",
+ debug_buf.length, debug_buf.bufsize);
+ }
+
+ address = (A_UINT32)debug_buf.next;
+ length = sizeof(struct dbglog_buf_s);
+ if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
+ (A_UCHAR *)&debug_buf, length))
+ {
+ break;
+ }
+
+ } while (address != firstbuf);
+ }
+
+ ar->dbgLogFetchInProgress = FALSE;
+
+ return A_OK;
+}
+
+void
+ar6000_dbglog_event(AR_SOFTC_T *ar, A_UINT32 dropped,
+ A_INT8 *buffer, A_UINT32 length)
+{
+#ifdef REPORT_DEBUG_LOGS_TO_APP
+ #define MAX_WIRELESS_EVENT_SIZE 252
+ /*
+ * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages.
+ * There seems to be a limitation on the length of message that could be
+ * transmitted to the user app via this mechanism.
+ */
+ A_UINT32 send, sent;
+
+ sent = 0;
+ send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
+ MAX_WIRELESS_EVENT_SIZE);
+ while (send) {
+ ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, &buffer[sent], send);
+ sent += send;
+ send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
+ MAX_WIRELESS_EVENT_SIZE);
+ }
+#else
+ AR_DEBUG_PRINTF("Dropped logs: 0x%x\nDebug info length: %d\n",
+ dropped, length);
+
+ /* Interpret the debug logs */
+ dbglog_parse_debug_logs(buffer, length);
+#endif /* REPORT_DEBUG_LOGS_TO_APP */
+}
+
+
+
+static int __init
+ar6000_init_module(void)
+{
+ static int probed = 0;
+ A_STATUS status;
+ HTC_INIT_INFO initInfo;
+
+ A_MEMZERO(&initInfo,sizeof(initInfo));
+ initInfo.AddInstance = ar6000_avail_ev;
+ initInfo.DeleteInstance = ar6000_unavail_ev;
+ initInfo.TargetFailure = ar6000_target_failure;
+
+
+#ifdef DEBUG
+ /* Set the debug flags if specified at load time */
+ if(debugflags != 0)
+ {
+ g_dbg_flags = debugflags;
+ }
+#endif
+
+ if (probed) {
+ return -ENODEV;
+ }
+ probed++;
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+ memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD));
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+ ar6000_gpio_init();
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+ status = HTCInit(&initInfo);
+ if(status != A_OK)
+ return -ENODEV;
+
+ return 0;
+}
+
+static void __exit
+ar6000_cleanup_module(void)
+{
+ int i = 0;
+ struct net_device *ar6000_netdev;
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+ /* Delete the Adaptive Power Control timer */
+ if (timer_pending(&aptcTimer)) {
+ del_timer_sync(&aptcTimer);
+ }
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+ for (i=0; i < MAX_AR6000; i++) {
+ if (ar6000_devices[i] != NULL) {
+ ar6000_netdev = ar6000_devices[i];
+ ar6000_devices[i] = NULL;
+ ar6000_destroy(ar6000_netdev, 1);
+ }
+ }
+
+ /* shutting down HTC will cause the HIF layer to detach from the
+ * underlying bus driver which will cause the subsequent deletion of
+ * all HIF and HTC instances */
+ HTCShutDown();
+
+ AR_DEBUG_PRINTF("ar6000_cleanup: success\n");
+}
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+void
+aptcTimerHandler(unsigned long arg)
+{
+ A_UINT32 numbytes;
+ A_UINT32 throughput;
+ AR_SOFTC_T *ar;
+ A_STATUS status;
+
+ ar = (AR_SOFTC_T *)arg;
+ A_ASSERT(ar != NULL);
+ A_ASSERT(!timer_pending(&aptcTimer));
+
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ /* Get the number of bytes transferred */
+ numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
+ aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
+
+ /* Calculate and decide based on throughput thresholds */
+ throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */
+ if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) {
+ /* Enable Sleep and delete the timer */
+ A_ASSERT(ar->arWmiReady == TRUE);
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ status = wmi_powermode_cmd(ar->arWmi, REC_POWER);
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ A_ASSERT(status == A_OK);
+ aptcTR.timerScheduled = FALSE;
+ } else {
+ A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
+ }
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+
+
+/* set HTC block size, assume BMI is already initialized */
+A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar)
+{
+ A_STATUS status;
+ A_UINT32 blocksizes[HTC_MAILBOX_NUM_MAX];
+
+ do {
+ /* get the block sizes */
+ status = HIFConfigureDevice(ar->arHifDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+ blocksizes, sizeof(blocksizes));
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF("Failed to get block size info from HIF layer...\n");
+ break;
+ }
+ /* note: we actually get the block size for mailbox 1, for SDIO the block
+ * size on mailbox 0 is artificially set to 1 */
+ /* must be a power of 2 */
+ A_ASSERT((blocksizes[1] & (blocksizes[1] - 1)) == 0);
+
+ /* set the host interest area for the block size */
+ status = BMIWriteMemory(ar->arHifDevice,
+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz),
+ (A_UCHAR *)&blocksizes[1],
+ 4);
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF("BMIWriteMemory for IO block size failed \n");
+ break;
+ }
+
+ AR_DEBUG_PRINTF("Block Size Set: %d (target address:0x%X)\n",
+ blocksizes[1], HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz));
+
+ /* set the host interest area for the mbox ISR yield limit */
+ status = BMIWriteMemory(ar->arHifDevice,
+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_isr_yield_limit),
+ (A_UCHAR *)&mbox_yield_limit,
+ 4);
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF("BMIWriteMemory for yield limit failed \n");
+ break;
+ }
+
+ } while (FALSE);
+
+ return status;
+}
+
+static void free_raw_buffers(AR_SOFTC_T *ar)
+{
+ int i, j;
+
+ for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
+ for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++)
+ kfree(ar->raw_htc_read_buffer[i][j]);
+ for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++)
+ kfree(ar->raw_htc_write_buffer[i][j]);
+ }
+}
+
+static int alloc_raw_buffers(AR_SOFTC_T *ar)
+{
+ int i, j;
+ raw_htc_buffer *b;
+
+ for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) {
+ for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++) {
+ b = kzalloc(sizeof(*b), GFP_KERNEL);
+ if (!b)
+ return -ENOMEM;
+ ar->raw_htc_read_buffer[i][j] = b;
+ }
+ for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++) {
+ b = kzalloc(sizeof(*b), GFP_KERNEL);
+ if (!b)
+ return -ENOMEM;
+ ar->raw_htc_write_buffer[i][j] = b;
+ }
+ }
+ return 0;
+}
+
+static const struct net_device_ops ar6000_netdev_ops = {
+ .ndo_init = &ar6000_init,
+ .ndo_open = &ar6000_open,
+ .ndo_stop = &ar6000_close,
+ .ndo_start_xmit = &ar6000_data_tx,
+ .ndo_get_stats = &ar6000_get_stats,
+ .ndo_do_ioctl = &ar6000_ioctl,
+};
+/*
+ * HTC Event handlers
+ */
+static void
+ar6000_avail_ev(HTC_HANDLE HTCHandle)
+{
+ int i;
+ struct net_device *dev;
+ AR_SOFTC_T *ar;
+ int device_index = 0;
+
+ AR_DEBUG_PRINTF("ar6000_available\n");
+
+ for (i=0; i < MAX_AR6000; i++) {
+ if (ar6000_devices[i] == NULL) {
+ break;
+ }
+ }
+
+ if (i == MAX_AR6000) {
+ AR_DEBUG_PRINTF("ar6000_available: max devices reached\n");
+ return;
+ }
+
+ /* Save this. It gives a bit better readability especially since */
+ /* we use another local "i" variable below. */
+ device_index = i;
+
+ A_ASSERT(HTCHandle != NULL);
+
+ dev = alloc_etherdev(sizeof(AR_SOFTC_T));
+ if (dev == NULL) {
+ AR_DEBUG_PRINTF("ar6000_available: can't alloc etherdev\n");
+ return;
+ }
+
+ ether_setup(dev);
+
+ if (netdev_priv(dev) == NULL) {
+ printk(KERN_CRIT "ar6000_available: Could not allocate memory\n");
+ return;
+ }
+
+ A_MEMZERO(netdev_priv(dev), sizeof(AR_SOFTC_T));
+
+ ar = (AR_SOFTC_T *)netdev_priv(dev);
+ ar->arNetDev = dev;
+ ar->arHtcTarget = HTCHandle;
+ ar->arHifDevice = HTCGetHifDevice(HTCHandle);
+ ar->arWlanState = WLAN_ENABLED;
+ ar->arRadioSwitch = WLAN_ENABLED;
+ ar->arDeviceIndex = device_index;
+
+ A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev);
+ ar->arHBChallengeResp.seqNum = 0;
+ ar->arHBChallengeResp.outstanding = FALSE;
+ ar->arHBChallengeResp.missCnt = 0;
+ ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT;
+ ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT;
+
+ ar6000_init_control_info(ar);
+ init_waitqueue_head(&arEvent);
+ sema_init(&ar->arSem, 1);
+
+ if (alloc_raw_buffers(ar)) {
+ free_raw_buffers(ar);
+ /*
+ * @@@ Clean up our own mess, but for anything else, cheerfully mimick
+ * the beautiful error non-handling of the rest of this function.
+ */
+ return;
+ }
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+ A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+ /*
+ * If requested, perform some magic which requires no cooperation from
+ * the Target. It causes the Target to ignore flash and execute to the
+ * OS from ROM.
+ *
+ * This is intended to support recovery from a corrupted flash on Targets
+ * that support flash.
+ */
+ if (skipflash)
+ {
+ ar6000_reset_device_skipflash(ar->arHifDevice);
+ }
+
+ BMIInit();
+ {
+ struct bmi_target_info targ_info;
+
+ if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) {
+ return;
+ }
+
+ ar->arVersion.target_ver = targ_info.target_ver;
+ ar->arTargetType = targ_info.target_type;
+ }
+
+ if (enableuartprint) {
+ A_UINT32 param;
+ param = 1;
+ if (BMIWriteMemory(ar->arHifDevice,
+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable),
+ (A_UCHAR *)¶m,
+ 4)!= A_OK)
+ {
+ AR_DEBUG_PRINTF("BMIWriteMemory for enableuartprint failed \n");
+ return ;
+ }
+ AR_DEBUG_PRINTF("Serial console prints enabled\n");
+ }
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+ if(testmode) {
+ ar->arTargetMode = AR6000_TCMD_MODE;
+ }else {
+ ar->arTargetMode = AR6000_WLAN_MODE;
+ }
+#endif
+ if (enabletimerwar) {
+ A_UINT32 param;
+
+ if (BMIReadMemory(ar->arHifDevice,
+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
+ (A_UCHAR *)¶m,
+ 4)!= A_OK)
+ {
+ AR_DEBUG_PRINTF("BMIReadMemory for enabletimerwar failed \n");
+ return;
+ }
+
+ param |= HI_OPTION_TIMER_WAR;
+
+ if (BMIWriteMemory(ar->arHifDevice,
+ HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
+ (A_UCHAR *)¶m,
+ 4) != A_OK)
+ {
+ AR_DEBUG_PRINTF("BMIWriteMemory for enabletimerwar failed \n");
+ return;
+ }
+ AR_DEBUG_PRINTF("Timer WAR enabled\n");
+ }
+
+
+ /* since BMIInit is called in the driver layer, we have to set the block
+ * size here for the target */
+
+ if (A_FAILED(ar6000_SetHTCBlockSize(ar))) {
+ return;
+ }
+
+ spin_lock_init(&ar->arLock);
+
+ dev->netdev_ops = &ar6000_netdev_ops;
+ dev->watchdog_timeo = AR6000_TX_TIMEOUT;
+ ar6000_ioctl_iwsetup(&ath_iw_handler_def);
+ dev->wireless_handlers = &ath_iw_handler_def;
+ ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */
+
+ /*
+ * We need the OS to provide us with more headroom in order to
+ * perform dix to 802.3, WMI header encap, and the HTC header
+ */
+ dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) +
+ sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN;
+
+ /* This runs the init function */
+ SET_NETDEV_DEV(dev, HIFGetOSDevice(ar->arHifDevice));
+ if (register_netdev(dev)) {
+ AR_DEBUG_PRINTF("ar6000_avail: register_netdev failed\n");
+ ar6000_destroy(dev, 0);
+ return;
+ }
+
+ HTCSetInstance(ar->arHtcTarget, ar);
+
+ /* We only register the device in the global list if we succeed. */
+ /* If the device is in the global list, it will be destroyed */
+ /* when the module is unloaded. */
+ ar6000_devices[device_index] = dev;
+
+ AR_DEBUG_PRINTF("ar6000_avail: name=%s htcTarget=0x%x, dev=0x%x (%d), ar=0x%x\n",
+ dev->name, (A_UINT32)HTCHandle, (A_UINT32)dev, device_index,
+ (A_UINT32)ar);
+}
+
+static void ar6000_target_failure(void *Instance, A_STATUS Status)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
+ WMI_TARGET_ERROR_REPORT_EVENT errEvent;
+ static A_BOOL sip = FALSE;
+
+ if (Status != A_OK) {
+ if (timer_pending(&ar->arHBChallengeResp.timer)) {
+ A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
+ }
+
+ /* try dumping target assertion information (if any) */
+ ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType);
+
+ /*
+ * Fetch the logs from the target via the diagnostic
+ * window.
+ */
+ ar6000_dbglog_get_debug_logs(ar);
+
+ /* Report the error only once */
+ if (!sip) {
+ sip = TRUE;
+ errEvent.errorVal = WMI_TARGET_COM_ERR |
+ WMI_TARGET_FATAL_ERR;
+#ifdef SEND_EVENT_TO_APP
+ ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
+ (A_UINT8 *)&errEvent,
+ sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
+#endif
+ }
+ }
+}
+
+static void
+ar6000_unavail_ev(void *Instance)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
+ /* NULL out it's entry in the global list */
+ ar6000_devices[ar->arDeviceIndex] = NULL;
+ ar6000_destroy(ar->arNetDev, 1);
+}
+
+/*
+ * We need to differentiate between the surprise and planned removal of the
+ * device because of the following consideration:
+ * - In case of surprise removal, the hcd already frees up the pending
+ * for the device and hence there is no need to unregister the function
+ * driver inorder to get these requests. For planned removal, the function
+ * driver has to explictly unregister itself to have the hcd return all the
+ * pending requests before the data structures for the devices are freed up.
+ * Note that as per the current implementation, the function driver will
+ * end up releasing all the devices since there is no API to selectively
+ * release a particular device.
+ * - Certain commands issued to the target can be skipped for surprise
+ * removal since they will anyway not go through.
+ */
+static void
+ar6000_destroy(struct net_device *dev, unsigned int unregister)
+{
+ AR_SOFTC_T *ar;
+
+ AR_DEBUG_PRINTF("+ar6000_destroy \n");
+
+ if((dev == NULL) || ((ar = netdev_priv(dev)) == NULL))
+ {
+ AR_DEBUG_PRINTF("%s(): Failed to get device structure.\n", __func__);
+ return;
+ }
+
+ /* Clear the tx counters */
+ memset(tx_attempt, 0, sizeof(tx_attempt));
+ memset(tx_post, 0, sizeof(tx_post));
+ memset(tx_complete, 0, sizeof(tx_complete));
+
+ /* Free up the device data structure */
+ if (unregister) {
+ unregister_netdev(dev);
+ } else {
+ ar6000_close(dev);
+ ar6000_cleanup(dev);
+ }
+
+ free_raw_buffers(ar);
+
+#ifndef free_netdev
+ kfree(dev);
+#else
+ free_netdev(dev);
+#endif
+
+ AR_DEBUG_PRINTF("-ar6000_destroy \n");
+}
+
+static void ar6000_detect_error(unsigned long ptr)
+{
+ struct net_device *dev = (struct net_device *)ptr;
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_TARGET_ERROR_REPORT_EVENT errEvent;
+
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ if (ar->arHBChallengeResp.outstanding) {
+ ar->arHBChallengeResp.missCnt++;
+ } else {
+ ar->arHBChallengeResp.missCnt = 0;
+ }
+
+ if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) {
+ /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */
+ ar->arHBChallengeResp.missCnt = 0;
+ ar->arHBChallengeResp.seqNum = 0;
+ errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR;
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+#ifdef SEND_EVENT_TO_APP
+ ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
+ (A_UINT8 *)&errEvent,
+ sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
+#endif
+ return;
+ }
+
+ /* Generate the sequence number for the next challenge */
+ ar->arHBChallengeResp.seqNum++;
+ ar->arHBChallengeResp.outstanding = TRUE;
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+ /* Send the challenge on the control channel */
+ if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) {
+ AR_DEBUG_PRINTF("Unable to send heart beat challenge\n");
+ }
+
+
+ /* Reschedule the timer for the next challenge */
+ A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
+}
+
+void ar6000_init_profile_info(AR_SOFTC_T *ar)
+{
+ ar->arSsidLen = 0;
+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+ ar->arNetworkType = INFRA_NETWORK;
+ ar->arDot11AuthMode = OPEN_AUTH;
+ ar->arAuthMode = NONE_AUTH;
+ ar->arPairwiseCrypto = NONE_CRYPT;
+ ar->arPairwiseCryptoLen = 0;
+ ar->arGroupCrypto = NONE_CRYPT;
+ ar->arGroupCryptoLen = 0;
+ A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
+ A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+ A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
+ ar->arBssChannel = 0;
+}
+
+static void
+ar6000_init_control_info(AR_SOFTC_T *ar)
+{
+ ar->arWmiEnabled = FALSE;
+ ar6000_init_profile_info(ar);
+ ar->arDefTxKeyIndex = 0;
+ A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
+ ar->arChannelHint = 0;
+ ar->arListenInterval = MAX_LISTEN_INTERVAL;
+ ar->arVersion.host_ver = AR6K_SW_VERSION;
+ ar->arRssi = 0;
+ ar->arTxPwr = 0;
+ ar->arTxPwrSet = FALSE;
+ ar->arSkipScan = 0;
+ ar->arBeaconInterval = 0;
+ ar->arBitRate = 0;
+ ar->arMaxRetries = 0;
+ ar->arWmmEnabled = TRUE;
+}
+
+static int
+ar6000_open(struct net_device *dev)
+{
+ /* Wake up the queues */
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+static int
+ar6000_close(struct net_device *dev)
+{
+ /* Stop the transmit queues */
+ netif_stop_queue(dev);
+ return 0;
+}
+
+static int
+ar6000_cleanup(struct net_device *dev)
+{
+ AR_SOFTC_T *ar = netdev_priv(dev);
+
+ /* Stop the transmit queues */
+ netif_stop_queue(dev);
+
+ /* Disable the target and the interrupts associated with it */
+ if (ar->arWmiReady == TRUE)
+ {
+ if (!bypasswmi)
+ {
+ if (ar->arConnected == TRUE || ar->arConnectPending == TRUE)
+ {
+ AR_DEBUG_PRINTF("%s(): Disconnect\n", __func__);
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ ar6000_init_profile_info(ar);
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ wmi_disconnect_cmd(ar->arWmi);
+ }
+
+ ar6000_dbglog_get_debug_logs(ar);
+ ar->arWmiReady = FALSE;
+ ar->arConnected = FALSE;
+ ar->arConnectPending = FALSE;
+ wmi_shutdown(ar->arWmi);
+ ar->arWmiEnabled = FALSE;
+ ar->arWmi = NULL;
+ ar->arWlanState = WLAN_ENABLED;
+#ifdef USER_KEYS
+ ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+ ar->user_key_ctrl = 0;
+#endif
+ }
+
+ AR_DEBUG_PRINTF("%s(): WMI stopped\n", __func__);
+ }
+ else
+ {
+ AR_DEBUG_PRINTF("%s(): WMI not ready 0x%08x 0x%08x\n",
+ __func__, (unsigned int) ar, (unsigned int) ar->arWmi);
+
+ /* Shut down WMI if we have started it */
+ if(ar->arWmiEnabled == TRUE)
+ {
+ AR_DEBUG_PRINTF("%s(): Shut down WMI\n", __func__);
+ wmi_shutdown(ar->arWmi);
+ ar->arWmiEnabled = FALSE;
+ ar->arWmi = NULL;
+ }
+ }
+
+ /* stop HTC */
+ HTCStop(ar->arHtcTarget);
+
+ /* set the instance to NULL so we do not get called back on remove incase we
+ * we're explicity destroyed by module unload */
+ HTCSetInstance(ar->arHtcTarget, NULL);
+
+ if (resetok) {
+ /* try to reset the device if we can
+ * The driver may have been configure NOT to reset the target during
+ * a debug session */
+ AR_DEBUG_PRINTF(" Attempting to reset target on instance destroy.... \n");
+ ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
+ } else {
+ AR_DEBUG_PRINTF(" Host does not want target reset. \n");
+ }
+
+ /* Done with cookies */
+ ar6000_cookie_cleanup(ar);
+
+ /* Cleanup BMI */
+ BMIInit();
+
+ return 0;
+}
+
+/* connect to a service */
+static A_STATUS ar6000_connectservice(AR_SOFTC_T *ar,
+ HTC_SERVICE_CONNECT_REQ *pConnect,
+ WMI_PRI_STREAM_ID WmiStreamID,
+ char *pDesc)
+{
+ A_STATUS status;
+ HTC_SERVICE_CONNECT_RESP response;
+
+ do {
+
+ A_MEMZERO(&response,sizeof(response));
+
+ status = HTCConnectService(ar->arHtcTarget,
+ pConnect,
+ &response);
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(" Failed to connect to %s service status:%d \n", pDesc, status);
+ break;
+ }
+
+ if (WmiStreamID == WMI_NOT_MAPPED) {
+ /* done */
+ break;
+ }
+
+ /* set endpoint mapping for the WMI stream in the driver layer */
+ arSetWMIStream2EndpointIDMap(ar,WmiStreamID,response.Endpoint);
+
+ } while (FALSE);
+
+ return status;
+}
+
+static void ar6000_TxDataCleanup(AR_SOFTC_T *ar)
+{
+ /* flush all the data (non-control) streams
+ * we only flush packets that are tagged as data, we leave any control packets that
+ * were in the TX queues alone */
+ HTCFlushEndpoint(ar->arHtcTarget,
+ arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI),
+ AR6K_DATA_PKT_TAG);
+ HTCFlushEndpoint(ar->arHtcTarget,
+ arWMIStream2EndpointID(ar,WMI_LOW_PRI),
+ AR6K_DATA_PKT_TAG);
+ HTCFlushEndpoint(ar->arHtcTarget,
+ arWMIStream2EndpointID(ar,WMI_HIGH_PRI),
+ AR6K_DATA_PKT_TAG);
+ HTCFlushEndpoint(ar->arHtcTarget,
+ arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI),
+ AR6K_DATA_PKT_TAG);
+}
+
+/* This function does one time initialization for the lifetime of the device */
+int ar6000_init(struct net_device *dev)
+{
+ AR_SOFTC_T *ar;
+ A_STATUS status;
+ A_INT32 timeleft;
+
+ if((ar = netdev_priv(dev)) == NULL)
+ {
+ return(-EIO);
+ }
+
+ /* Do we need to finish the BMI phase */
+ if(BMIDone(ar->arHifDevice) != A_OK)
+ {
+ return -EIO;
+ }
+
+ if (!bypasswmi)
+ {
+#if 0 /* TBDXXX */
+ if (ar->arVersion.host_ver != ar->arVersion.target_ver) {
+ A_PRINTF("WARNING: Host version 0x%x does not match Target "
+ " version 0x%x!\n",
+ ar->arVersion.host_ver, ar->arVersion.target_ver);
+ }
+#endif
+
+ /* Indicate that WMI is enabled (although not ready yet) */
+ ar->arWmiEnabled = TRUE;
+ if ((ar->arWmi = wmi_init((void *) ar)) == NULL)
+ {
+ AR_DEBUG_PRINTF("%s() Failed to initialize WMI.\n", __func__);
+ return(-EIO);
+ }
+
+ AR_DEBUG_PRINTF("%s() Got WMI @ 0x%08x.\n", __func__,
+ (unsigned int) ar->arWmi);
+ }
+
+ do {
+ HTC_SERVICE_CONNECT_REQ connect;
+
+ /* the reason we have to wait for the target here is that the driver layer
+ * has to init BMI in order to set the host block size,
+ */
+ status = HTCWaitTarget(ar->arHtcTarget);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ A_MEMZERO(&connect,sizeof(connect));
+ /* meta data is unused for now */
+ connect.pMetaData = NULL;
+ connect.MetaDataLength = 0;
+ /* these fields are the same for all service endpoints */
+ connect.EpCallbacks.pContext = ar;
+ connect.EpCallbacks.EpTxComplete = ar6000_tx_complete;
+ connect.EpCallbacks.EpRecv = ar6000_rx;
+ connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill;
+ connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full;
+ connect.EpCallbacks.EpSendAvail = ar6000_tx_queue_avail;
+ /* set the max queue depth so that our ar6000_tx_queue_full handler gets called.
+ * Linux has the peculiarity of not providing flow control between the
+ * NIC and the network stack. There is no API to indicate that a TX packet
+ * was sent which could provide some back pressure to the network stack.
+ * Under linux you would have to wait till the network stack consumed all sk_buffs
+ * before any back-flow kicked in. Which isn't very friendly.
+ * So we have to manage this ourselves */
+ connect.MaxSendQueueDepth = 32;
+
+ /* connect to control service */
+ connect.ServiceID = WMI_CONTROL_SVC;
+ status = ar6000_connectservice(ar,
+ &connect,
+ WMI_CONTROL_PRI,
+ "WMI CONTROL");
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* for the remaining data services set the connection flag to reduce dribbling,
+ * if configured to do so */
+ if (reduce_credit_dribble) {
+ connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE;
+ /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value
+ * of 0-3 */
+ connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
+ connect.ConnectionFlags |=
+ ((A_UINT16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
+ }
+ /* connect to best-effort service */
+ connect.ServiceID = WMI_DATA_BE_SVC;
+
+ status = ar6000_connectservice(ar,
+ &connect,
+ WMI_BEST_EFFORT_PRI,
+ "WMI DATA BE");
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* connect to back-ground
+ * map this to WMI LOW_PRI */
+ connect.ServiceID = WMI_DATA_BK_SVC;
+ status = ar6000_connectservice(ar,
+ &connect,
+ WMI_LOW_PRI,
+ "WMI DATA BK");
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* connect to Video service, map this to
+ * to HI PRI */
+ connect.ServiceID = WMI_DATA_VI_SVC;
+ status = ar6000_connectservice(ar,
+ &connect,
+ WMI_HIGH_PRI,
+ "WMI DATA VI");
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* connect to VO service, this is currently not
+ * mapped to a WMI priority stream due to historical reasons.
+ * WMI originally defined 3 priorities over 3 mailboxes
+ * We can change this when WMI is reworked so that priorities are not
+ * dependent on mailboxes */
+ connect.ServiceID = WMI_DATA_VO_SVC;
+ status = ar6000_connectservice(ar,
+ &connect,
+ WMI_HIGHEST_PRI,
+ "WMI DATA VO");
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_CONTROL_PRI) != 0);
+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI) != 0);
+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_LOW_PRI) != 0);
+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGH_PRI) != 0);
+ A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI) != 0);
+ } while (FALSE);
+
+ if (A_FAILED(status)) {
+ return (-EIO);
+ }
+
+ /*
+ * give our connected endpoints some buffers
+ */
+ ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_CONTROL_PRI));
+
+ ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI));
+
+ /*
+ * We will post the receive buffers only for SPE testing and so we are
+ * making it conditional on the 'bypasswmi' flag.
+ */
+ if (bypasswmi) {
+ ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_LOW_PRI));
+ ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_HIGH_PRI));
+ }
+
+ /* setup credit distribution */
+ ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo);
+
+ /* Since cookies are used for HTC transports, they should be */
+ /* initialized prior to enabling HTC. */
+ ar6000_cookie_init(ar);
+
+ /* start HTC */
+ status = HTCStart(ar->arHtcTarget);
+
+ if (status != A_OK) {
+ if (ar->arWmiEnabled == TRUE) {
+ wmi_shutdown(ar->arWmi);
+ ar->arWmiEnabled = FALSE;
+ ar->arWmi = NULL;
+ }
+ ar6000_cookie_cleanup(ar);
+ return -EIO;
+ }
+
+ if (!bypasswmi) {
+ /* Wait for Wmi event to be ready */
+ timeleft = wait_event_interruptible_timeout(arEvent,
+ (ar->arWmiReady == TRUE), wmitimeout * HZ);
+
+ if(!timeleft || signal_pending(current))
+ {
+ AR_DEBUG_PRINTF("WMI is not ready or wait was interrupted\n");
+#if defined(DWSIM) /* TBDXXX */
+ AR_DEBUG_PRINTF(".....but proceed anyway.\n");
+#else
+ return -EIO;
+#endif
+ }
+
+ AR_DEBUG_PRINTF("%s() WMI is ready\n", __func__);
+
+ /* Communicate the wmi protocol verision to the target */
+ if ((ar6000_set_host_app_area(ar)) != A_OK) {
+ AR_DEBUG_PRINTF("Unable to set the host app area\n");
+ }
+ }
+
+ ar->arNumDataEndPts = 1;
+
+ return(0);
+}
+
+
+void
+ar6000_bitrate_rx(void *devt, A_INT32 rateKbps)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+ ar->arBitRate = rateKbps;
+ wake_up(&arEvent);
+}
+
+void
+ar6000_ratemask_rx(void *devt, A_UINT16 ratemask)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+ ar->arRateMask = ratemask;
+ wake_up(&arEvent);
+}
+
+void
+ar6000_txPwr_rx(void *devt, A_UINT8 txPwr)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+ ar->arTxPwr = txPwr;
+ wake_up(&arEvent);
+}
+
+
+void
+ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+ A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (A_UINT16));
+ ar->arNumChannels = numChan;
+
+ wake_up(&arEvent);
+}
+
+A_UINT8
+ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, A_UINT32 * mapNo)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ A_UINT8 *datap;
+ ATH_MAC_HDR *macHdr;
+ A_UINT32 i, eptMap;
+
+ (*mapNo) = 0;
+ datap = A_NETBUF_DATA(skb);
+ macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR));
+ if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) {
+ return ENDPOINT_2;
+ }
+
+ eptMap = -1;
+ for (i = 0; i < ar->arNodeNum; i ++) {
+ if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) {
+ (*mapNo) = i + 1;
+ ar->arNodeMap[i].txPending ++;
+ return ar->arNodeMap[i].epId;
+ }
+
+ if ((eptMap == -1) && !ar->arNodeMap[i].txPending) {
+ eptMap = i;
+ }
+ }
+
+ if (eptMap == -1) {
+ eptMap = ar->arNodeNum;
+ ar->arNodeNum ++;
+ A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM);
+ }
+
+ A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN);
+
+ for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) {
+ if (!ar->arTxPending[i]) {
+ ar->arNodeMap[eptMap].epId = i;
+ break;
+ }
+ // No free endpoint is available, start redistribution on the inuse endpoints.
+ if (i == ENDPOINT_5) {
+ ar->arNodeMap[eptMap].epId = ar->arNexEpId;
+ ar->arNexEpId ++;
+ if (ar->arNexEpId > ENDPOINT_5) {
+ ar->arNexEpId = ENDPOINT_2;
+ }
+ }
+ }
+
+ (*mapNo) = eptMap + 1;
+ ar->arNodeMap[eptMap].txPending ++;
+
+ return ar->arNodeMap[eptMap].epId;
+}
+
+#ifdef DEBUG
+static void ar6000_dump_skb(struct sk_buff *skb)
+{
+ u_char *ch;
+ for (ch = A_NETBUF_DATA(skb);
+ (A_UINT32)ch < ((A_UINT32)A_NETBUF_DATA(skb) +
+ A_NETBUF_LEN(skb)); ch++)
+ {
+ AR_DEBUG_PRINTF("%2.2x ", *ch);
+ }
+ AR_DEBUG_PRINTF("\n");
+}
+#endif
+
+static int
+ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_PRI_STREAM_ID streamID = WMI_NOT_MAPPED;
+ A_UINT32 mapNo = 0;
+ int len;
+ struct ar_cookie *cookie;
+ A_BOOL checkAdHocPsMapping = FALSE;
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
+ skb->list = NULL;
+#endif
+
+ AR_DEBUG2_PRINTF("ar6000_data_tx start - skb=0x%x, data=0x%x, len=0x%x\n",
+ (A_UINT32)skb, (A_UINT32)A_NETBUF_DATA(skb),
+ A_NETBUF_LEN(skb));
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+ /* TCMD doesnt support any data, free the buf and return */
+ if(ar->arTargetMode == AR6000_TCMD_MODE) {
+ A_NETBUF_FREE(skb);
+ return 0;
+ }
+#endif
+ do {
+
+ if (ar->arWmiReady == FALSE && bypasswmi == 0) {
+ break;
+ }
+
+#ifdef BLOCK_TX_PATH_FLAG
+ if (blocktx) {
+ break;
+ }
+#endif /* BLOCK_TX_PATH_FLAG */
+
+ if (ar->arWmiEnabled) {
+ if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len) {
+ struct sk_buff *newbuf;
+ /*
+ * We really should have gotten enough headroom but sometimes
+ * we still get packets with not enough headroom. Copy the packet.
+ */
+ len = A_NETBUF_LEN(skb);
+ newbuf = A_NETBUF_ALLOC(len);
+ if (newbuf == NULL) {
+ break;
+ }
+ A_NETBUF_PUT(newbuf, len);
+ A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len);
+ A_NETBUF_FREE(skb);
+ skb = newbuf;
+ /* fall through and assemble header */
+ }
+
+ if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) {
+ AR_DEBUG_PRINTF("ar6000_data_tx - wmi_dix_2_dot3 failed\n");
+ break;
+ }
+
+ if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE) != A_OK) {
+ AR_DEBUG_PRINTF("ar6000_data_tx - wmi_data_hdr_add failed\n");
+ break;
+ }
+
+ if ((ar->arNetworkType == ADHOC_NETWORK) &&
+ ar->arIbssPsEnable && ar->arConnected) {
+ /* flag to check adhoc mapping once we take the lock below: */
+ checkAdHocPsMapping = TRUE;
+
+ } else {
+ /* get the stream mapping */
+ if (ar->arWmmEnabled) {
+ streamID = wmi_get_stream_id(ar->arWmi,
+ wmi_implicit_create_pstream(ar->arWmi, skb, UPLINK_TRAFFIC, UNDEFINED_PRI));
+ } else {
+ streamID = WMI_BEST_EFFORT_PRI;
+ }
+ }
+
+ } else {
+ struct iphdr *ipHdr;
+ /*
+ * the endpoint is directly based on the TOS field in the IP
+ * header **** only for testing ******
+ */
+ ipHdr = A_NETBUF_DATA(skb) + sizeof(ATH_MAC_HDR);
+ /* here we map the TOS field to an endpoint number, this is for
+ * the endpointping test application */
+ streamID = IP_TOS_TO_WMI_PRI(ipHdr->tos);
+ }
+
+ } while (FALSE);
+
+ /* did we succeed ? */
+ if ((streamID == WMI_NOT_MAPPED) && !checkAdHocPsMapping) {
+ /* cleanup and exit */
+ A_NETBUF_FREE(skb);
+ AR6000_STAT_INC(ar, tx_dropped);
+ AR6000_STAT_INC(ar, tx_aborted_errors);
+ return 0;
+ }
+
+ cookie = NULL;
+
+ /* take the lock to protect driver data */
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ do {
+
+ if (checkAdHocPsMapping) {
+ streamID = ar6000_ibss_map_epid(skb, dev, &mapNo);
+ }
+
+ A_ASSERT(streamID != WMI_NOT_MAPPED);
+
+ /* validate that the endpoint is connected */
+ if (arWMIStream2EndpointID(ar,streamID) == 0) {
+ AR_DEBUG_PRINTF("Stream %d is NOT mapped!\n",streamID);
+ break;
+ }
+ /* allocate resource for this packet */
+ cookie = ar6000_alloc_cookie(ar);
+
+ if (cookie != NULL) {
+ /* update counts while the lock is held */
+ ar->arTxPending[streamID]++;
+ ar->arTotalTxDataPending++;
+ }
+
+ } while (FALSE);
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+ if (cookie != NULL) {
+ cookie->arc_bp[0] = (A_UINT32)skb;
+ cookie->arc_bp[1] = mapNo;
+ SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
+ cookie,
+ A_NETBUF_DATA(skb),
+ A_NETBUF_LEN(skb),
+ arWMIStream2EndpointID(ar,streamID),
+ AR6K_DATA_PKT_TAG);
+
+#ifdef DEBUG
+ if (debugdriver >= 3) {
+ ar6000_dump_skb(skb);
+ }
+#endif
+ /* HTC interface is asynchronous, if this fails, cleanup will happen in
+ * the ar6000_tx_complete callback */
+ HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
+ } else {
+ /* no packet to send, cleanup */
+ A_NETBUF_FREE(skb);
+ AR6000_STAT_INC(ar, tx_dropped);
+ AR6000_STAT_INC(ar, tx_aborted_errors);
+ }
+
+ return 0;
+}
+
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+static void
+tvsub(register struct timeval *out, register struct timeval *in)
+{
+ if((out->tv_usec -= in->tv_usec) < 0) {
+ out->tv_sec--;
+ out->tv_usec += 1000000;
+ }
+ out->tv_sec -= in->tv_sec;
+}
+
+void
+applyAPTCHeuristics(AR_SOFTC_T *ar)
+{
+ A_UINT32 duration;
+ A_UINT32 numbytes;
+ A_UINT32 throughput;
+ struct timeval ts;
+ A_STATUS status;
+
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) {
+ do_gettimeofday(&ts);
+ tvsub(&ts, &aptcTR.samplingTS);
+ duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */
+ numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
+
+ if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) {
+ /* Initialize the time stamp and byte count */
+ aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
+ do_gettimeofday(&aptcTR.samplingTS);
+
+ /* Calculate and decide based on throughput thresholds */
+ throughput = ((numbytes * 8) / duration);
+ if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) {
+ /* Disable Sleep and schedule a timer */
+ A_ASSERT(ar->arWmiReady == TRUE);
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
+ aptcTR.timerScheduled = TRUE;
+ }
+ }
+ }
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+static void
+ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *) Context;
+
+ if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
+ if (!bypasswmi) {
+ /* under normal WMI if this is getting full, then something is running rampant
+ * the host should not be exhausting the WMI queue with too many commands
+ * the only exception to this is during testing using endpointping */
+
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ /* set flag to handle subsequent messages */
+ ar->arWMIControlEpFull = TRUE;
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ AR_DEBUG_PRINTF("WMI Control Endpoint is FULL!!! \n");
+ }
+ } else {
+ /* one of the data endpoints queues is getting full..need to stop network stack
+ * the queue will resume after credits received */
+ netif_stop_queue(ar->arNetDev);
+ }
+}
+
+static void
+ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+
+ if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) {
+ /* FIXME: what do for it? */
+ } else {
+ /* Wake up interface, rescheduling prevented. */
+ if (ar->arConnected == TRUE || bypasswmi)
+ netif_wake_queue(ar->arNetDev);
+ }
+}
+
+static void
+ar6000_tx_complete(void *Context, HTC_PACKET *pPacket)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+ void *cookie = (void *)pPacket->pPktContext;
+ struct sk_buff *skb = NULL;
+ A_UINT32 mapNo = 0;
+ A_STATUS status;
+ struct ar_cookie * ar_cookie;
+ WMI_PRI_STREAM_ID streamID;
+ A_BOOL wakeEvent = FALSE;
+
+ status = pPacket->Status;
+ ar_cookie = (struct ar_cookie *)cookie;
+ skb = (struct sk_buff *)ar_cookie->arc_bp[0];
+ streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
+ mapNo = ar_cookie->arc_bp[1];
+
+ A_ASSERT(skb);
+ A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(skb));
+
+ if (A_SUCCESS(status)) {
+ A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(skb));
+ }
+
+ AR_DEBUG2_PRINTF("ar6000_tx_complete skb=0x%x data=0x%x len=0x%x sid=%d ",
+ (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
+ pPacket->ActualLength,
+ streamID);
+
+ /* lock the driver as we update internal state */
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ ar->arTxPending[streamID]--;
+
+ if ((streamID != WMI_CONTROL_PRI) || bypasswmi) {
+ ar->arTotalTxDataPending--;
+ }
+
+ if (streamID == WMI_CONTROL_PRI)
+ {
+ if (ar->arWMIControlEpFull) {
+ /* since this packet completed, the WMI EP is no longer full */
+ ar->arWMIControlEpFull = FALSE;
+ }
+
+ if (ar->arTxPending[streamID] == 0) {
+ wakeEvent = TRUE;
+ }
+ }
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF("%s() -TX ERROR, status: 0x%x\n", __func__,
+ status);
+ AR6000_STAT_INC(ar, tx_errors);
+ } else {
+ AR_DEBUG2_PRINTF("OK\n");
+ AR6000_STAT_INC(ar, tx_packets);
+ ar->arNetStats.tx_bytes += A_NETBUF_LEN(skb);
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+ aptcTR.bytesTransmitted += a_netbuf_to_len(skb);
+ applyAPTCHeuristics(ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+ }
+
+ // TODO this needs to be looked at
+ if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable
+ && (streamID != WMI_CONTROL_PRI) && mapNo)
+ {
+ mapNo --;
+ ar->arNodeMap[mapNo].txPending --;
+
+ if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) {
+ A_UINT32 i;
+ for (i = ar->arNodeNum; i > 0; i --) {
+ if (!ar->arNodeMap[i - 1].txPending) {
+ A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping));
+ ar->arNodeNum --;
+ } else {
+ break;
+ }
+ }
+ }
+ }
+
+ /* Freeing a cookie should not be contingent on either of */
+ /* these flags, just if we have a cookie or not. */
+ /* Can we even get here without a cookie? Fix later. */
+ if (ar->arWmiReady == TRUE || (bypasswmi))
+ {
+ ar6000_free_cookie(ar, cookie);
+ }
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+ /* lock is released, we can freely call other kernel APIs */
+
+ /* this indirectly frees the HTC_PACKET */
+ A_NETBUF_FREE(skb);
+
+ if (wakeEvent) {
+ wake_up(&arEvent);
+ }
+}
+
+/*
+ * Receive event handler. This is called by HTC when a packet is received
+ */
+int pktcount;
+static void
+ar6000_rx(void *Context, HTC_PACKET *pPacket)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+ struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext;
+ int minHdrLen;
+ A_STATUS status = pPacket->Status;
+ WMI_PRI_STREAM_ID streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint);
+ HTC_ENDPOINT_ID ept = pPacket->Endpoint;
+
+ A_ASSERT((status != A_OK) || (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN)));
+
+ AR_DEBUG2_PRINTF("ar6000_rx ar=0x%x sid=%d, skb=0x%x, data=0x%x, len=0x%x ",
+ (A_UINT32)ar, streamID, (A_UINT32)skb, (A_UINT32)pPacket->pBuffer,
+ pPacket->ActualLength);
+ if (status != A_OK) {
+ AR_DEBUG2_PRINTF("ERR\n");
+ } else {
+ AR_DEBUG2_PRINTF("OK\n");
+ }
+
+ /* take lock to protect buffer counts
+ * and adaptive power throughput state */
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ ar->arRxBuffers[streamID]--;
+
+ if (A_SUCCESS(status)) {
+ AR6000_STAT_INC(ar, rx_packets);
+ ar->arNetStats.rx_bytes += pPacket->ActualLength;
+#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
+ aptcTR.bytesReceived += a_netbuf_to_len(skb);
+ applyAPTCHeuristics(ar);
+#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
+
+ A_NETBUF_PUT(skb, pPacket->ActualLength + HTC_HEADER_LEN);
+ A_NETBUF_PULL(skb, HTC_HEADER_LEN);
+
+#ifdef DEBUG
+ if (debugdriver >= 2) {
+ ar6000_dump_skb(skb);
+ }
+#endif /* DEBUG */
+ }
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+ if (status != A_OK) {
+ AR6000_STAT_INC(ar, rx_errors);
+ A_NETBUF_FREE(skb);
+ } else if (ar->arWmiEnabled == TRUE) {
+ if (streamID == WMI_CONTROL_PRI) {
+ /*
+ * this is a wmi control msg
+ */
+ wmi_control_rx(ar->arWmi, skb);
+ } else {
+ WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb);
+ if (WMI_DATA_HDR_IS_MSG_TYPE(dhdr, CNTL_MSGTYPE)) {
+ /*
+ * this is a wmi control msg
+ */
+ /* strip off WMI hdr */
+ wmi_data_hdr_remove(ar->arWmi, skb);
+ wmi_control_rx(ar->arWmi, skb);
+ } else {
+ /*
+ * this is a wmi data packet
+ */
+ minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) +
+ sizeof(ATH_LLC_SNAP_HDR);
+
+ if ((pPacket->ActualLength < minHdrLen) ||
+ (pPacket->ActualLength > AR6000_BUFFER_SIZE))
+ {
+ /*
+ * packet is too short or too long
+ */
+ AR_DEBUG_PRINTF("TOO SHORT or TOO LONG\n");
+ AR6000_STAT_INC(ar, rx_errors);
+ AR6000_STAT_INC(ar, rx_length_errors);
+ A_NETBUF_FREE(skb);
+ } else {
+ if (ar->arWmmEnabled) {
+ wmi_implicit_create_pstream(ar->arWmi, skb,
+ DNLINK_TRAFFIC, UNDEFINED_PRI);
+ }
+#if 0
+ /* Access RSSI values here */
+ AR_DEBUG_PRINTF("RSSI %d\n",
+ ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi);
+#endif
+ wmi_data_hdr_remove(ar->arWmi, skb);
+ wmi_dot3_2_dix(ar->arWmi, skb);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
+ /*
+ * extra push and memcpy, for eth_type_trans() of 2.4 kernel
+ * will pull out hard_header_len bytes of the skb.
+ */
+ A_NETBUF_PUSH(skb, sizeof(WMI_DATA_HDR) + sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN);
+ A_MEMCPY(A_NETBUF_DATA(skb), A_NETBUF_DATA(skb) + sizeof(WMI_DATA_HDR) +
+ sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN, sizeof(ATH_MAC_HDR));
+#endif
+ if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
+ {
+ skb->dev = ar->arNetDev;
+ skb->protocol = eth_type_trans(skb, ar->arNetDev);
+ netif_rx(skb);
+ }
+ else
+ {
+ A_NETBUF_FREE(skb);
+ }
+ }
+ }
+ }
+ } else {
+ if ((ar->arNetDev->flags & IFF_UP) == IFF_UP)
+ {
+ skb->dev = ar->arNetDev;
+ skb->protocol = eth_type_trans(skb, ar->arNetDev);
+ netif_rx(skb);
+ }
+ else
+ {
+ A_NETBUF_FREE(skb);
+ }
+ }
+
+ if (status != A_ECANCELED) {
+ /*
+ * HTC provides A_ECANCELED status when it doesn't want to be refilled
+ * (probably due to a shutdown)
+ */
+ ar6000_rx_refill(Context, ept);
+ }
+
+
+}
+
+static void
+ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+ void *osBuf;
+ int RxBuffers;
+ int buffersToRefill;
+ HTC_PACKET *pPacket;
+ WMI_PRI_STREAM_ID streamId = arEndpoint2WMIStreamID(ar,Endpoint);
+
+ buffersToRefill = (int)AR6000_MAX_RX_BUFFERS -
+ (int)ar->arRxBuffers[streamId];
+
+ if (buffersToRefill <= 0) {
+ /* fast return, nothing to fill */
+ return;
+ }
+
+ AR_DEBUG2_PRINTF("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n",
+ buffersToRefill, Endpoint);
+
+ for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) {
+ osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE);
+ if (NULL == osBuf) {
+ break;
+ }
+ /* the HTC packet wrapper is at the head of the reserved area
+ * in the skb */
+ pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
+ /* set re-fill info */
+ SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint);
+ /* add this packet */
+ HTCAddReceivePkt(ar->arHtcTarget, pPacket);
+ }
+
+ /* update count */
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ ar->arRxBuffers[streamId] += RxBuffers;
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+}
+
+static struct net_device_stats *
+ar6000_get_stats(struct net_device *dev)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ return &ar->arNetStats;
+}
+
+static struct iw_statistics *
+ar6000_get_iwstats(struct net_device * dev)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ TARGET_STATS *pStats = &ar->arTargetStats;
+ struct iw_statistics * pIwStats = &ar->arIwStats;
+
+ if ((ar->arWmiReady == FALSE)
+ /*
+ * The in_atomic function is used to determine if the scheduling is
+ * allowed in the current context or not. This was introduced in 2.6
+ * From what I have read on the differences between 2.4 and 2.6, the
+ * 2.4 kernel did not support preemption and so this check might not
+ * be required for 2.4 kernels.
+ */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+ || (in_atomic())
+#endif
+ )
+ {
+ pIwStats->status = 0;
+ pIwStats->qual.qual = 0;
+ pIwStats->qual.level =0;
+ pIwStats->qual.noise = 0;
+ pIwStats->discard.code =0;
+ pIwStats->discard.retries=0;
+ pIwStats->miss.beacon =0;
+ return pIwStats;
+ }
+ if (down_interruptible(&ar->arSem)) {
+ pIwStats->status = 0;
+ return pIwStats;
+ }
+
+
+ ar->statsUpdatePending = TRUE;
+
+ if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
+ up(&ar->arSem);
+ pIwStats->status = 0;
+ return pIwStats;
+ }
+
+ wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
+
+ if (signal_pending(current)) {
+ AR_DEBUG_PRINTF("ar6000 : WMI get stats timeout \n");
+ up(&ar->arSem);
+ pIwStats->status = 0;
+ return pIwStats;
+ }
+ pIwStats->status = 1 ;
+ pIwStats->qual.qual = pStats->cs_aveBeacon_rssi;
+ pIwStats->qual.level =pStats->cs_aveBeacon_rssi + 161; /* noise is -95 dBm */
+ pIwStats->qual.noise = pStats->noise_floor_calibation;
+ pIwStats->discard.code = pStats->rx_decrypt_err;
+ pIwStats->discard.retries = pStats->tx_retry_cnt;
+ pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
+ up(&ar->arSem);
+ return pIwStats;
+}
+
+void
+ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+ struct net_device *dev = ar->arNetDev;
+
+ ar->arWmiReady = TRUE;
+ wake_up(&arEvent);
+ A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN);
+ AR_DEBUG_PRINTF("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+ dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3],
+ dev->dev_addr[4], dev->dev_addr[5]);
+
+ ar->arPhyCapability = phyCap;
+}
+
+A_UINT8
+ar6000_iptos_to_userPriority(A_UINT8 *pkt)
+{
+ struct iphdr *ipHdr = (struct iphdr *)pkt;
+ A_UINT8 userPriority;
+
+ /*
+ * IP Tos format :
+ * (Refer Pg 57 WMM-test-plan-v1.2)
+ * IP-TOS - 8bits
+ * : DSCP(6-bits) ECN(2-bits)
+ * : DSCP - P2 P1 P0 X X X
+ * where (P2 P1 P0) form 802.1D
+ */
+ userPriority = ipHdr->tos >> 5;
+ return (userPriority & 0x7);
+}
+
+void
+ar6000_connect_event(AR_SOFTC_T *ar, A_UINT16 channel, A_UINT8 *bssid,
+ A_UINT16 listenInterval, A_UINT16 beaconInterval,
+ NETWORK_TYPE networkType, A_UINT8 beaconIeLen,
+ A_UINT8 assocReqLen, A_UINT8 assocRespLen,
+ A_UINT8 *assocInfo)
+{
+ union iwreq_data wrqu;
+ int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos;
+ static const char *tag1 = "ASSOCINFO(ReqIEs=";
+ static const char *tag2 = "ASSOCRESPIE=";
+ static const char *beaconIetag = "BEACONIE=";
+ char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + sizeof(tag1)];
+ char *pos;
+ A_UINT8 key_op_ctrl;
+
+ A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid));
+ ar->arBssChannel = channel;
+
+ A_PRINTF("AR6000 connected event on freq %d ", channel);
+ A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
+ " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d"
+ " assocRespLen =%d\n",
+ bssid[0], bssid[1], bssid[2],
+ bssid[3], bssid[4], bssid[5],
+ listenInterval, beaconInterval,
+ beaconIeLen, assocReqLen, assocRespLen);
+ if (networkType & ADHOC_NETWORK) {
+ if (networkType & ADHOC_CREATOR) {
+ A_PRINTF("Network: Adhoc (Creator)\n");
+ } else {
+ A_PRINTF("Network: Adhoc (Joiner)\n");
+ }
+ } else {
+ A_PRINTF("Network: Infrastructure\n");
+ }
+
+ if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) {
+ AR_DEBUG_PRINTF("\nBeaconIEs= ");
+
+ beacon_ie_pos = 0;
+ A_MEMZERO(buf, sizeof(buf));
+ sprintf(buf, "%s", beaconIetag);
+ pos = buf + 9;
+ for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) {
+ AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+ sprintf(pos, "%2.2x", assocInfo[i]);
+ pos += 2;
+ }
+ AR_DEBUG_PRINTF("\n");
+
+ A_MEMZERO(&wrqu, sizeof(wrqu));
+ wrqu.data.length = strlen(buf);
+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+ }
+
+ if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2))))
+ {
+ assoc_resp_ie_pos = beaconIeLen + assocReqLen +
+ sizeof(A_UINT16) + /* capinfo*/
+ sizeof(A_UINT16) + /* status Code */
+ sizeof(A_UINT16) ; /* associd */
+ A_MEMZERO(buf, sizeof(buf));
+ sprintf(buf, "%s", tag2);
+ pos = buf + 12;
+ AR_DEBUG_PRINTF("\nAssocRespIEs= ");
+ /*
+ * The Association Response Frame w.o. the WLAN header is delivered to
+ * the host, so skip over to the IEs
+ */
+ for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++)
+ {
+ AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+ sprintf(pos, "%2.2x", assocInfo[i]);
+ pos += 2;
+ }
+ AR_DEBUG_PRINTF("\n");
+
+ A_MEMZERO(&wrqu, sizeof(wrqu));
+ wrqu.data.length = strlen(buf);
+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+ }
+
+ if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) {
+ /*
+ * assoc Request includes capability and listen interval. Skip these.
+ */
+ assoc_req_ie_pos = beaconIeLen +
+ sizeof(A_UINT16) + /* capinfo*/
+ sizeof(A_UINT16); /* listen interval */
+
+ A_MEMZERO(buf, sizeof(buf));
+ sprintf(buf, "%s", tag1);
+ pos = buf + 17;
+ AR_DEBUG_PRINTF("AssocReqIEs= ");
+ for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) {
+ AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+ sprintf(pos, "%2.2x", assocInfo[i]);
+ pos += 2;;
+ }
+ AR_DEBUG_PRINTF("\n");
+
+ A_MEMZERO(&wrqu, sizeof(wrqu));
+ wrqu.data.length = strlen(buf);
+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+ }
+
+#ifdef USER_KEYS
+ if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN &&
+ ar->user_saved_keys.keyOk == TRUE)
+ {
+
+ key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC;
+ if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) {
+ key_op_ctrl &= ~KEY_OP_INIT_RSC;
+ } else {
+ key_op_ctrl |= KEY_OP_INIT_RSC;
+ }
+ ar6000_reinstall_keys(ar, key_op_ctrl);
+ }
+#endif /* USER_KEYS */
+
+ /* flush data queues */
+ ar6000_TxDataCleanup(ar);
+
+ netif_start_queue(ar->arNetDev);
+
+ if ((OPEN_AUTH == ar->arDot11AuthMode) &&
+ (NONE_AUTH == ar->arAuthMode) &&
+ (WEP_CRYPT == ar->arPairwiseCrypto))
+ {
+ if (!ar->arConnected) {
+ ar6000_install_static_wep_keys(ar);
+ }
+ }
+
+ ar->arConnected = TRUE;
+ ar->arConnectPending = FALSE;
+
+ reconnect_flag = 0;
+
+ A_MEMZERO(&wrqu, sizeof(wrqu));
+ A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+ wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
+ if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) {
+ A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap));
+ ar->arNodeNum = 0;
+ ar->arNexEpId = ENDPOINT_2;
+ }
+
+}
+
+void ar6000_set_numdataendpts(AR_SOFTC_T *ar, A_UINT32 num)
+{
+ A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1));
+ ar->arNumDataEndPts = num;
+}
+
+void
+ar6000_disconnect_event(AR_SOFTC_T *ar, A_UINT8 reason, A_UINT8 *bssid,
+ A_UINT8 assocRespLen, A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus)
+{
+ A_UINT8 i;
+
+ A_PRINTF("AR6000 disconnected");
+ if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) {
+ A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
+ bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
+ }
+ A_PRINTF("\n");
+
+ AR_DEBUG_PRINTF("\nDisconnect Reason is %d", reason);
+ AR_DEBUG_PRINTF("\nProtocol Reason/Status Code is %d", protocolReasonStatus);
+ AR_DEBUG_PRINTF("\nAssocResp Frame = %s",
+ assocRespLen ? " " : "NULL");
+ for (i = 0; i < assocRespLen; i++) {
+ if (!(i % 0x10)) {
+ AR_DEBUG_PRINTF("\n");
+ }
+ AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]);
+ }
+ AR_DEBUG_PRINTF("\n");
+ /*
+ * If the event is due to disconnect cmd from the host, only they the target
+ * would stop trying to connect. Under any other condition, target would
+ * keep trying to connect.
+ *
+ */
+ if( reason == DISCONNECT_CMD)
+ {
+ ar->arConnectPending = FALSE;
+ } else {
+ ar->arConnectPending = TRUE;
+ if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) ||
+ ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) {
+ ar->arConnected = TRUE;
+ return;
+ }
+ }
+ ar->arConnected = FALSE;
+
+ if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) {
+ reconnect_flag = 0;
+ }
+
+#ifdef USER_KEYS
+ if (reason != CSERV_DISCONNECT)
+ {
+ ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+ ar->user_key_ctrl = 0;
+ }
+#endif /* USER_KEYS */
+
+ netif_stop_queue(ar->arNetDev);
+ A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
+ ar->arBssChannel = 0;
+ ar->arBeaconInterval = 0;
+
+ ar6000_TxDataCleanup(ar);
+}
+
+void
+ar6000_regDomain_event(AR_SOFTC_T *ar, A_UINT32 regCode)
+{
+ A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode);
+ ar->arRegCode = regCode;
+}
+
+void
+ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info)
+{
+ static const char *tag = "PRE-AUTH";
+ char buf[128];
+ union iwreq_data wrqu;
+ int i;
+
+ AR_DEBUG_PRINTF("AR6000 Neighbor Report Event\n");
+ for (i=0; i < numAps; info++, i++) {
+ AR_DEBUG_PRINTF("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
+ info->bssid[0], info->bssid[1], info->bssid[2],
+ info->bssid[3], info->bssid[4], info->bssid[5]);
+ if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) {
+ AR_DEBUG_PRINTF("preauth-cap");
+ }
+ if (info->bssFlags & WMI_PMKID_VALID_BSS) {
+ AR_DEBUG_PRINTF(" pmkid-valid\n");
+ continue; /* we skip bss if the pmkid is already valid */
+ }
+ AR_DEBUG_PRINTF("\n");
+ snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x",
+ tag,
+ info->bssid[0], info->bssid[1], info->bssid[2],
+ info->bssid[3], info->bssid[4], info->bssid[5],
+ i, info->bssFlags);
+ A_MEMZERO(&wrqu, sizeof(wrqu));
+ wrqu.data.length = strlen(buf);
+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+ }
+}
+
+void
+ar6000_tkip_micerr_event(AR_SOFTC_T *ar, A_UINT8 keyid, A_BOOL ismcast)
+{
+ static const char *tag = "MLME-MICHAELMICFAILURE.indication";
+ char buf[128];
+ union iwreq_data wrqu;
+
+ A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n",
+ keyid, ismcast ? "multi": "uni");
+ snprintf(buf, sizeof(buf), "%s(keyid=%d %scat)", tag, keyid,
+ ismcast ? "multi" : "uni");
+ memset(&wrqu, 0, sizeof(wrqu));
+ wrqu.data.length = strlen(buf);
+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+}
+
+void
+ar6000_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status)
+{
+ AR_DEBUG_PRINTF("AR6000 scan complete: %d\n", status);
+
+ ar->scan_complete = 1;
+ wake_up_interruptible(&ar6000_scan_queue);
+}
+
+void
+ar6000_targetStats_event(AR_SOFTC_T *ar, WMI_TARGET_STATS *pTarget)
+{
+ TARGET_STATS *pStats = &ar->arTargetStats;
+ A_UINT8 ac;
+
+ /*A_PRINTF("AR6000 updating target stats\n");*/
+ pStats->tx_packets += pTarget->txrxStats.tx_stats.tx_packets;
+ pStats->tx_bytes += pTarget->txrxStats.tx_stats.tx_bytes;
+ pStats->tx_unicast_pkts += pTarget->txrxStats.tx_stats.tx_unicast_pkts;
+ pStats->tx_unicast_bytes += pTarget->txrxStats.tx_stats.tx_unicast_bytes;
+ pStats->tx_multicast_pkts += pTarget->txrxStats.tx_stats.tx_multicast_pkts;
+ pStats->tx_multicast_bytes += pTarget->txrxStats.tx_stats.tx_multicast_bytes;
+ pStats->tx_broadcast_pkts += pTarget->txrxStats.tx_stats.tx_broadcast_pkts;
+ pStats->tx_broadcast_bytes += pTarget->txrxStats.tx_stats.tx_broadcast_bytes;
+ pStats->tx_rts_success_cnt += pTarget->txrxStats.tx_stats.tx_rts_success_cnt;
+ for(ac = 0; ac < WMM_NUM_AC; ac++)
+ pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac];
+ pStats->tx_errors += pTarget->txrxStats.tx_stats.tx_errors;
+ pStats->tx_failed_cnt += pTarget->txrxStats.tx_stats.tx_failed_cnt;
+ pStats->tx_retry_cnt += pTarget->txrxStats.tx_stats.tx_retry_cnt;
+ pStats->tx_rts_fail_cnt += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt;
+ pStats->tx_unicast_rate = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate);
+
+ pStats->rx_packets += pTarget->txrxStats.rx_stats.rx_packets;
+ pStats->rx_bytes += pTarget->txrxStats.rx_stats.rx_bytes;
+ pStats->rx_unicast_pkts += pTarget->txrxStats.rx_stats.rx_unicast_pkts;
+ pStats->rx_unicast_bytes += pTarget->txrxStats.rx_stats.rx_unicast_bytes;
+ pStats->rx_multicast_pkts += pTarget->txrxStats.rx_stats.rx_multicast_pkts;
+ pStats->rx_multicast_bytes += pTarget->txrxStats.rx_stats.rx_multicast_bytes;
+ pStats->rx_broadcast_pkts += pTarget->txrxStats.rx_stats.rx_broadcast_pkts;
+ pStats->rx_broadcast_bytes += pTarget->txrxStats.rx_stats.rx_broadcast_bytes;
+ pStats->rx_fragment_pkt += pTarget->txrxStats.rx_stats.rx_fragment_pkt;
+ pStats->rx_errors += pTarget->txrxStats.rx_stats.rx_errors;
+ pStats->rx_crcerr += pTarget->txrxStats.rx_stats.rx_crcerr;
+ pStats->rx_key_cache_miss += pTarget->txrxStats.rx_stats.rx_key_cache_miss;
+ pStats->rx_decrypt_err += pTarget->txrxStats.rx_stats.rx_decrypt_err;
+ pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames;
+ pStats->rx_unicast_rate = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate);
+
+
+ pStats->tkip_local_mic_failure
+ += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure;
+ pStats->tkip_counter_measures_invoked
+ += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked;
+ pStats->tkip_replays += pTarget->txrxStats.tkipCcmpStats.tkip_replays;
+ pStats->tkip_format_errors += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors;
+ pStats->ccmp_format_errors += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors;
+ pStats->ccmp_replays += pTarget->txrxStats.tkipCcmpStats.ccmp_replays;
+
+
+ pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt;
+ pStats->noise_floor_calibation = pTarget->noise_floor_calibation;
+
+ pStats->cs_bmiss_cnt += pTarget->cservStats.cs_bmiss_cnt;
+ pStats->cs_lowRssi_cnt += pTarget->cservStats.cs_lowRssi_cnt;
+ pStats->cs_connect_cnt += pTarget->cservStats.cs_connect_cnt;
+ pStats->cs_disconnect_cnt += pTarget->cservStats.cs_disconnect_cnt;
+ pStats->cs_aveBeacon_snr = pTarget->cservStats.cs_aveBeacon_snr;
+ pStats->cs_aveBeacon_rssi = pTarget->cservStats.cs_aveBeacon_rssi;
+ pStats->cs_lastRoam_msec = pTarget->cservStats.cs_lastRoam_msec;
+ pStats->cs_snr = pTarget->cservStats.cs_snr;
+ pStats->cs_rssi = pTarget->cservStats.cs_rssi;
+
+ pStats->lq_val = pTarget->lqVal;
+
+ pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped;
+ pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups;
+ pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups;
+ pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded;
+
+ ar->statsUpdatePending = FALSE;
+ wake_up(&arEvent);
+}
+
+void
+ar6000_rssiThreshold_event(AR_SOFTC_T *ar, WMI_RSSI_THRESHOLD_VAL newThreshold, A_INT16 rssi)
+{
+ USER_RSSI_THOLD userRssiThold;
+
+ userRssiThold.tag = rssi_map[newThreshold].tag;
+ userRssiThold.rssi = rssi;
+ AR_DEBUG2_PRINTF("rssi Threshold range = %d tag = %d rssi = %d\n", newThreshold, userRssiThold.tag, rssi);
+#ifdef SEND_EVENT_TO_APP
+ ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(A_UINT8 *)&userRssiThold, sizeof(USER_RSSI_THOLD));
+#endif
+}
+
+
+void
+ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, A_UINT32 cookie, A_UINT32 source)
+{
+ if (source == APP_HB_CHALLENGE) {
+ /* Report it to the app in case it wants a positive acknowledgement */
+#ifdef SEND_EVENT_TO_APP
+ ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID,
+ (A_UINT8 *)&cookie, sizeof(cookie));
+#endif
+ } else {
+ /* This would ignore the replys that come in after their due time */
+ if (cookie == ar->arHBChallengeResp.seqNum) {
+ ar->arHBChallengeResp.outstanding = FALSE;
+ }
+ }
+}
+
+
+void
+ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal)
+{
+ char *errString[] = {
+ [WMI_TARGET_PM_ERR_FAIL] "WMI_TARGET_PM_ERR_FAIL",
+ [WMI_TARGET_KEY_NOT_FOUND] "WMI_TARGET_KEY_NOT_FOUND",
+ [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR",
+ [WMI_TARGET_BMISS] "WMI_TARGET_BMISS",
+ [WMI_PSDISABLE_NODE_JOIN] "WMI_PSDISABLE_NODE_JOIN"
+ };
+
+ A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal);
+
+ /* One error is reported at a time, and errorval is a bitmask */
+ if(errorVal & (errorVal - 1))
+ return;
+
+ A_PRINTF("AR6000 Error type = ");
+ switch(errorVal)
+ {
+ case WMI_TARGET_PM_ERR_FAIL:
+ case WMI_TARGET_KEY_NOT_FOUND:
+ case WMI_TARGET_DECRYPTION_ERR:
+ case WMI_TARGET_BMISS:
+ case WMI_PSDISABLE_NODE_JOIN:
+ A_PRINTF("%s\n", errString[errorVal]);
+ break;
+ default:
+ A_PRINTF("INVALID\n");
+ break;
+ }
+
+}
+
+
+void
+ar6000_cac_event(AR_SOFTC_T *ar, A_UINT8 ac, A_UINT8 cacIndication,
+ A_UINT8 statusCode, A_UINT8 *tspecSuggestion)
+{
+ WMM_TSPEC_IE *tspecIe;
+
+ /*
+ * This is the TSPEC IE suggestion from AP.
+ * Suggestion provided by AP under some error
+ * cases, could be helpful for the host app.
+ * Check documentation.
+ */
+ tspecIe = (WMM_TSPEC_IE *)tspecSuggestion;
+
+ /*
+ * What do we do, if we get TSPEC rejection? One thought
+ * that comes to mind is implictly delete the pstream...
+ */
+ A_PRINTF("AR6000 CAC notification. "
+ "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n",
+ ac, cacIndication, statusCode);
+}
+
+#define AR6000_PRINT_BSSID(_pBss) do { \
+ A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\
+ (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\
+ (_pBss)[4],(_pBss)[5]); \
+} while(0)
+
+void
+ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl)
+{
+ A_UINT8 i;
+
+ A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n",
+ pTbl->numEntries, pTbl->roamMode);
+ for (i= 0; i < pTbl->numEntries; i++) {
+ A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i,
+ pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1],
+ pTbl->bssRoamInfo[i].bssid[2],
+ pTbl->bssRoamInfo[i].bssid[3],
+ pTbl->bssRoamInfo[i].bssid[4],
+ pTbl->bssRoamInfo[i].bssid[5]);
+ A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d"
+ " BIAS %d\n",
+ pTbl->bssRoamInfo[i].rssi,
+ pTbl->bssRoamInfo[i].rssidt,
+ pTbl->bssRoamInfo[i].last_rssi,
+ pTbl->bssRoamInfo[i].util,
+ pTbl->bssRoamInfo[i].roam_util,
+ pTbl->bssRoamInfo[i].bias);
+ }
+}
+
+void
+ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply)
+{
+ A_UINT8 i,j;
+
+ /*Each event now contains exactly one filter, see bug 26613*/
+ A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num, wow_reply->num_filters);
+ A_PRINTF("wow mode = %s host mode = %s\n",
+ (wow_reply->wow_mode == 0? "disabled":"enabled"),
+ (wow_reply->host_mode == 1 ? "awake":"asleep"));
+
+
+ /*If there are no patterns, the reply will only contain generic
+ WoW information. Pattern information will exist only if there are
+ patterns present. Bug 26716*/
+
+ /* If this event contains pattern information, display it*/
+ if (wow_reply->this_filter_num) {
+ i=0;
+ A_PRINTF("id=%d size=%d offset=%d\n",
+ wow_reply->wow_filters[i].wow_filter_id,
+ wow_reply->wow_filters[i].wow_filter_size,
+ wow_reply->wow_filters[i].wow_filter_offset);
+ A_PRINTF("wow pattern = ");
+ for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
+ A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]);
+ }
+
+ A_PRINTF("\nwow mask = ");
+ for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
+ A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]);
+ }
+ A_PRINTF("\n");
+ }
+}
+
+/*
+ * Report the Roaming related data collected on the target
+ */
+void
+ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p)
+{
+ A_PRINTF("Disconnect Data : BSSID: ");
+ AR6000_PRINT_BSSID(p->disassoc_bssid);
+ A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n",
+ p->disassoc_bss_rssi,p->disassoc_time,
+ p->no_txrx_time);
+ A_PRINTF("Connect Data: BSSID: ");
+ AR6000_PRINT_BSSID(p->assoc_bssid);
+ A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n",
+ p->assoc_bss_rssi,p->assoc_time,
+ p->allow_txrx_time);
+ A_PRINTF("Last Data Tx Time (b4 Disassoc) %d "\
+ "First Data Tx Time (after Assoc) %d\n",
+ p->last_data_txrx_time, p->first_data_txrx_time);
+}
+
+void
+ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p)
+{
+ switch (p->roamDataType) {
+ case ROAM_DATA_TIME:
+ ar6000_display_roam_time(&p->u.roamTime);
+ break;
+ default:
+ break;
+ }
+}
+
+void
+ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, A_UINT8 *datap, int len)
+{
+ struct sk_buff *skb;
+ WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap;
+
+
+ if (!ar->arMgmtFilter) {
+ return;
+ }
+ if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) &&
+ (bih->frameType != BEACON_FTYPE)) ||
+ ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) &&
+ (bih->frameType != PROBERESP_FTYPE)))
+ {
+ return;
+ }
+
+ if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) {
+
+ A_NETBUF_PUT(skb, len);
+ A_MEMCPY(A_NETBUF_DATA(skb), datap, len);
+ skb->dev = ar->arNetDev;
+ printk("MAC RAW...\n");
+// skb->mac.raw = A_NETBUF_DATA(skb);
+ skb->ip_summed = CHECKSUM_NONE;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->protocol = __constant_htons(0x0019);
+ netif_rx(skb);
+ }
+}
+
+A_UINT32 wmiSendCmdNum;
+
+A_STATUS
+ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+ A_STATUS status = A_OK;
+ struct ar_cookie *cookie = NULL;
+ int i;
+
+ /* take lock to protect ar6000_alloc_cookie() */
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ do {
+
+ AR_DEBUG2_PRINTF("ar_contrstatus = ol_tx: skb=0x%x, len=0x%x, sid=%d\n",
+ (A_UINT32)osbuf, A_NETBUF_LEN(osbuf), streamID);
+
+ if ((streamID == WMI_CONTROL_PRI) && (ar->arWMIControlEpFull)) {
+ /* control endpoint is full, don't allocate resources, we
+ * are just going to drop this packet */
+ cookie = NULL;
+ AR_DEBUG_PRINTF(" WMI Control EP full, dropping packet : 0x%X, len:%d \n",
+ (A_UINT32)osbuf, A_NETBUF_LEN(osbuf));
+ } else {
+ cookie = ar6000_alloc_cookie(ar);
+ }
+
+ if (cookie == NULL) {
+ status = A_NO_MEMORY;
+ break;
+ }
+
+ if(logWmiRawMsgs) {
+ A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum);
+ for(i = 0; i < a_netbuf_to_len(osbuf); i++)
+ A_PRINTF("%x ", ((A_UINT8 *)a_netbuf_to_data(osbuf))[i]);
+ A_PRINTF("\n");
+ }
+
+ wmiSendCmdNum++;
+
+ } while (FALSE);
+
+ if (cookie != NULL) {
+ /* got a structure to send it out on */
+ ar->arTxPending[streamID]++;
+
+ if (streamID != WMI_CONTROL_PRI) {
+ ar->arTotalTxDataPending++;
+ }
+ }
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+ if (cookie != NULL) {
+ cookie->arc_bp[0] = (A_UINT32)osbuf;
+ cookie->arc_bp[1] = 0;
+ SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
+ cookie,
+ A_NETBUF_DATA(osbuf),
+ A_NETBUF_LEN(osbuf),
+ arWMIStream2EndpointID(ar,streamID),
+ AR6K_CONTROL_PKT_TAG);
+ /* this interface is asynchronous, if there is an error, cleanup will happen in the
+ * TX completion callback */
+ HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
+ status = A_OK;
+ }
+
+ return status;
+}
+
+/* indicate tx activity or inactivity on a WMI stream */
+void ar6000_indicate_tx_activity(void *devt, A_UINT8 TrafficClass, A_BOOL Active)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+ WMI_PRI_STREAM_ID streamid;
+
+ if (ar->arWmiEnabled) {
+ streamid = wmi_get_stream_id(ar->arWmi, TrafficClass);
+ } else {
+ /* for mbox ping testing, the traffic class is mapped directly as a stream ID,
+ * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c */
+ streamid = (WMI_PRI_STREAM_ID)TrafficClass;
+ }
+
+ /* notify HTC, this may cause credit distribution changes */
+
+ HTCIndicateActivityChange(ar->arHtcTarget,
+ arWMIStream2EndpointID(ar,streamid),
+ Active);
+
+}
+
+module_init(ar6000_init_module);
+module_exit(ar6000_cleanup_module);
+
+/* Init cookie queue */
+static void
+ar6000_cookie_init(AR_SOFTC_T *ar)
+{
+ A_UINT32 i;
+
+ ar->arCookieList = NULL;
+ A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem));
+
+ for (i = 0; i < MAX_COOKIE_NUM; i++) {
+ ar6000_free_cookie(ar, &s_ar_cookie_mem[i]);
+ }
+}
+
+/* cleanup cookie queue */
+static void
+ar6000_cookie_cleanup(AR_SOFTC_T *ar)
+{
+ /* It is gone .... */
+ ar->arCookieList = NULL;
+}
+
+/* Init cookie queue */
+static void
+ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie)
+{
+ /* Insert first */
+ A_ASSERT(ar != NULL);
+ A_ASSERT(cookie != NULL);
+ cookie->arc_list_next = ar->arCookieList;
+ ar->arCookieList = cookie;
+}
+
+/* cleanup cookie queue */
+static struct ar_cookie *
+ar6000_alloc_cookie(AR_SOFTC_T *ar)
+{
+ struct ar_cookie *cookie;
+
+ cookie = ar->arCookieList;
+ if(cookie != NULL)
+ {
+ ar->arCookieList = cookie->arc_list_next;
+ }
+
+ return cookie;
+}
+
+#ifdef SEND_EVENT_TO_APP
+/*
+ * This function is used to send event which come from taget to
+ * the application. The buf which send to application is include
+ * the event ID and event content.
+ */
+#define EVENT_ID_LEN 2
+void ar6000_send_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId,
+ A_UINT8 *datap, int len)
+{
+
+#if (WIRELESS_EXT >= 15)
+
+/* note: IWEVCUSTOM only exists in wireless extensions after version 15 */
+
+ char *buf;
+ A_UINT16 size;
+ union iwreq_data wrqu;
+
+ size = len + EVENT_ID_LEN;
+
+ if (size > IW_CUSTOM_MAX) {
+ AR_DEBUG_PRINTF("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n",
+ eventId, size, IW_CUSTOM_MAX);
+ return;
+ }
+
+ buf = A_MALLOC_NOWAIT(size);
+ A_MEMZERO(buf, size);
+ A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
+ A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
+
+ //AR_DEBUG_PRINTF("event ID = %d,len = %d\n",*(A_UINT16*)buf, size);
+ A_MEMZERO(&wrqu, sizeof(wrqu));
+ wrqu.data.length = size;
+ wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
+
+ A_FREE(buf);
+#endif
+
+
+}
+#endif
+
+
+void
+ar6000_tx_retry_err_event(void *devt)
+{
+ AR_DEBUG2_PRINTF("Tx retries reach maximum!\n");
+}
+
+void
+ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, A_UINT8 snr)
+{
+ AR_DEBUG2_PRINTF("snr threshold range %d, snr %d\n", newThreshold, snr);
+}
+
+void
+ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, A_UINT8 lq)
+{
+ AR_DEBUG2_PRINTF("lq threshold range %d, lq %d\n", newThreshold, lq);
+}
+
+
+
+A_UINT32
+a_copy_to_user(void *to, const void *from, A_UINT32 n)
+{
+ return(copy_to_user(to, from, n));
+}
+
+A_UINT32
+a_copy_from_user(void *to, const void *from, A_UINT32 n)
+{
+ return(copy_from_user(to, from, n));
+}
+
+
+A_STATUS
+ar6000_get_driver_cfg(struct net_device *dev,
+ A_UINT16 cfgParam,
+ void *result)
+{
+
+ A_STATUS ret = 0;
+
+ switch(cfgParam)
+ {
+ case AR6000_DRIVER_CFG_GET_WLANNODECACHING:
+ *((A_UINT32 *)result) = wlanNodeCaching;
+ break;
+ case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS:
+ *((A_UINT32 *)result) = logWmiRawMsgs;
+ break;
+ default:
+ ret = EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+void
+ar6000_keepalive_rx(void *devt, A_UINT8 configured)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+
+ ar->arKeepaliveConfigured = configured;
+ wake_up(&arEvent);
+}
+
+void
+ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, WMI_PMKID *pmkidList)
+{
+ A_UINT8 i, j;
+
+ A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID);
+
+ for (i = 0; i < numPMKID; i++) {
+ A_PRINTF("\nPMKID %d ", i);
+ for (j = 0; j < WMI_PMKID_LEN; j++) {
+ A_PRINTF("%2.2x", pmkidList->pmkid[j]);
+ }
+ pmkidList++;
+ }
+}
+
+#ifdef USER_KEYS
+static A_STATUS
+
+ar6000_reinstall_keys(AR_SOFTC_T *ar, A_UINT8 key_op_ctrl)
+{
+ A_STATUS status = A_OK;
+ struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik;
+ struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik;
+ CRYPTO_TYPE keyType = ar->user_saved_keys.keyType;
+
+ if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) {
+ if (NONE_CRYPT == keyType) {
+ goto _reinstall_keys_out;
+ }
+
+ if (uik->ik_keylen) {
+ status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix,
+ ar->user_saved_keys.keyType, PAIRWISE_USAGE,
+ uik->ik_keylen, (A_UINT8 *)&uik->ik_keyrsc,
+ uik->ik_keydata, key_op_ctrl, SYNC_BEFORE_WMIFLAG);
+ }
+
+ } else {
+ status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata);
+ }
+
+ if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) {
+ if (NONE_CRYPT == keyType) {
+ goto _reinstall_keys_out;
+ }
+
+ if (bik->ik_keylen) {
+ status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix,
+ ar->user_saved_keys.keyType, GROUP_USAGE,
+ bik->ik_keylen, (A_UINT8 *)&bik->ik_keyrsc,
+ bik->ik_keydata, key_op_ctrl, NO_SYNC_WMIFLAG);
+ }
+ } else {
+ status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata);
+ }
+
+_reinstall_keys_out:
+ ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
+ ar->user_key_ctrl = 0;
+
+ return status;
+}
+#endif /* USER_KEYS */
+
+
+void
+ar6000_dset_open_req(
+ void *context,
+ A_UINT32 id,
+ A_UINT32 targHandle,
+ A_UINT32 targReplyFn,
+ A_UINT32 targReplyArg)
+{
+}
+
+void
+ar6000_dset_close(
+ void *context,
+ A_UINT32 access_cookie)
+{
+ return;
+}
+
+void
+ar6000_dset_data_req(
+ void *context,
+ A_UINT32 accessCookie,
+ A_UINT32 offset,
+ A_UINT32 length,
+ A_UINT32 targBuf,
+ A_UINT32 targReplyFn,
+ A_UINT32 targReplyArg)
+{
+}
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _AR6000_H_
+#define _AR6000_H_
+
+#include <linux/version.h>
+
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/iw_handler.h>
+#include <linux/if_arp.h>
+#include <linux/ip.h>
+#include <linux/semaphore.h>
+#include <linux/wireless.h>
+#include <linux/module.h>
+#include <asm/io.h>
+
+#include <a_config.h>
+#include <athdefs.h>
+#include "a_types.h"
+#include "a_osapi.h"
+#include "htc_api.h"
+#include "wmi.h"
+#include "a_drv.h"
+#include "bmi.h"
+#include <ieee80211.h>
+#include <ieee80211_ioctl.h>
+#include <wlan_api.h>
+#include <wmi_api.h>
+#include "gpio_api.h"
+#include "gpio.h"
+#include <host_version.h>
+#include <linux/rtnetlink.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include "AR6Khwreg.h"
+#include "ar6000_api.h"
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+#include <testcmd.h>
+#endif
+
+#include "targaddrs.h"
+#include "dbglog_api.h"
+#include "ar6000_diag.h"
+#include "common_drv.h"
+
+#ifndef __dev_put
+#define __dev_put(dev) dev_put(dev)
+#endif
+
+#ifdef USER_KEYS
+
+#define USER_SAVEDKEYS_STAT_INIT 0
+#define USER_SAVEDKEYS_STAT_RUN 1
+
+// TODO this needs to move into the AR_SOFTC struct
+struct USER_SAVEDKEYS {
+ struct ieee80211req_key ucast_ik;
+ struct ieee80211req_key bcast_ik;
+ CRYPTO_TYPE keyType;
+ A_BOOL keyOk;
+};
+#endif
+
+#define DBG_INFO 0x00000001
+#define DBG_ERROR 0x00000002
+#define DBG_WARNING 0x00000004
+#define DBG_SDIO 0x00000008
+#define DBG_HIF 0x00000010
+#define DBG_HTC 0x00000020
+#define DBG_WMI 0x00000040
+#define DBG_WMI2 0x00000080
+#define DBG_DRIVER 0x00000100
+
+#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING)
+
+
+#ifdef DEBUG
+#define AR_DEBUG_PRINTF(args...) if (debugdriver) A_PRINTF(args);
+#define AR_DEBUG2_PRINTF(args...) if (debugdriver >= 2) A_PRINTF(args);
+extern int debugdriver;
+#else
+#define AR_DEBUG_PRINTF(args...)
+#define AR_DEBUG2_PRINTF(args...)
+#endif
+
+A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define MAX_AR6000 1
+#define AR6000_MAX_RX_BUFFERS 16
+#define AR6000_BUFFER_SIZE 1664
+#define AR6000_TX_TIMEOUT 10
+#define AR6000_ETH_ADDR_LEN 6
+#define AR6000_MAX_ENDPOINTS 4
+#define MAX_NODE_NUM 15
+#define MAX_COOKIE_NUM 150
+#define AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT 1
+#define AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT 1
+
+enum {
+ DRV_HB_CHALLENGE = 0,
+ APP_HB_CHALLENGE
+};
+
+/* HTC RAW streams */
+typedef enum _HTC_RAW_STREAM_ID {
+ HTC_RAW_STREAM_NOT_MAPPED = -1,
+ HTC_RAW_STREAM_0 = 0,
+ HTC_RAW_STREAM_1 = 1,
+ HTC_RAW_STREAM_2 = 2,
+ HTC_RAW_STREAM_3 = 3,
+ HTC_RAW_STREAM_NUM_MAX
+} HTC_RAW_STREAM_ID;
+
+#define RAW_HTC_READ_BUFFERS_NUM 4
+#define RAW_HTC_WRITE_BUFFERS_NUM 4
+
+typedef struct {
+ int currPtr;
+ int length;
+ unsigned char data[AR6000_BUFFER_SIZE];
+ HTC_PACKET HTCPacket;
+} raw_htc_buffer;
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/*
+ * add TCMD_MODE besides wmi and bypasswmi
+ * in TCMD_MODE, only few TCMD releated wmi commands
+ * counld be hanlder
+ */
+enum {
+ AR6000_WMI_MODE = 0,
+ AR6000_BYPASS_MODE,
+ AR6000_TCMD_MODE,
+ AR6000_WLAN_MODE
+};
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+struct ar_wep_key {
+ A_UINT8 arKeyIndex;
+ A_UINT8 arKeyLen;
+ A_UINT8 arKey[64];
+} ;
+
+struct ar_node_mapping {
+ A_UINT8 macAddress[6];
+ A_UINT8 epId;
+ A_UINT8 txPending;
+};
+
+struct ar_cookie {
+ A_UINT32 arc_bp[2]; /* Must be first field */
+ HTC_PACKET HtcPkt; /* HTC packet wrapper */
+ struct ar_cookie *arc_list_next;
+};
+
+struct ar_hb_chlng_resp {
+ A_TIMER timer;
+ A_UINT32 frequency;
+ A_UINT32 seqNum;
+ A_BOOL outstanding;
+ A_UINT8 missCnt;
+ A_UINT8 missThres;
+};
+
+typedef struct ar6_softc {
+ struct net_device *arNetDev; /* net_device pointer */
+ void *arWmi;
+ int arTxPending[WMI_PRI_MAX_COUNT];
+ int arTotalTxDataPending;
+ A_UINT8 arNumDataEndPts;
+ A_BOOL arWmiEnabled;
+ A_BOOL arWmiReady;
+ A_BOOL arConnected;
+ A_BOOL arRadioSwitch;
+ HTC_HANDLE arHtcTarget;
+ void *arHifDevice;
+ spinlock_t arLock;
+ struct semaphore arSem;
+ int arRxBuffers[WMI_PRI_MAX_COUNT];
+ int arSsidLen;
+ u_char arSsid[32];
+ A_UINT8 arNetworkType;
+ A_UINT8 arDot11AuthMode;
+ A_UINT8 arAuthMode;
+ A_UINT8 arPairwiseCrypto;
+ A_UINT8 arPairwiseCryptoLen;
+ A_UINT8 arGroupCrypto;
+ A_UINT8 arGroupCryptoLen;
+ A_UINT8 arDefTxKeyIndex;
+ struct ar_wep_key arWepKeyList[WMI_MAX_KEY_INDEX + 1];
+ A_UINT8 arBssid[6];
+ A_UINT8 arReqBssid[6];
+ A_UINT16 arChannelHint;
+ A_UINT16 arBssChannel;
+ A_UINT16 arListenInterval;
+ struct ar6000_version arVersion;
+ A_UINT32 arTargetType;
+ A_INT8 arRssi;
+ A_UINT8 arTxPwr;
+ A_BOOL arTxPwrSet;
+ A_INT32 arBitRate;
+ struct net_device_stats arNetStats;
+ struct iw_statistics arIwStats;
+ A_INT8 arNumChannels;
+ A_UINT16 arChannelList[32];
+ A_UINT32 arRegCode;
+ A_BOOL statsUpdatePending;
+ TARGET_STATS arTargetStats;
+ A_INT8 arMaxRetries;
+ A_UINT8 arPhyCapability;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+ A_UINT8 tcmdRxReport;
+ A_UINT32 tcmdRxTotalPkt;
+ A_INT32 tcmdRxRssi;
+ A_UINT32 tcmdPm;
+ A_UINT32 arTargetMode;
+#endif
+ AR6000_WLAN_STATE arWlanState;
+ struct ar_node_mapping arNodeMap[MAX_NODE_NUM];
+ A_UINT8 arIbssPsEnable;
+ A_UINT8 arNodeNum;
+ A_UINT8 arNexEpId;
+ struct ar_cookie *arCookieList;
+ A_UINT16 arRateMask;
+ A_UINT8 arSkipScan;
+ A_UINT16 arBeaconInterval;
+ A_BOOL arConnectPending;
+ A_BOOL arWmmEnabled;
+ struct ar_hb_chlng_resp arHBChallengeResp;
+ A_UINT8 arKeepaliveConfigured;
+ A_UINT32 arMgmtFilter;
+ HTC_ENDPOINT_ID arWmi2EpMapping[WMI_PRI_MAX_COUNT];
+ WMI_PRI_STREAM_ID arEp2WmiMapping[ENDPOINT_MAX];
+#ifdef HTC_RAW_INTERFACE
+ HTC_ENDPOINT_ID arRaw2EpMapping[HTC_RAW_STREAM_NUM_MAX];
+ HTC_RAW_STREAM_ID arEp2RawMapping[ENDPOINT_MAX];
+ struct semaphore raw_htc_read_sem[HTC_RAW_STREAM_NUM_MAX];
+ struct semaphore raw_htc_write_sem[HTC_RAW_STREAM_NUM_MAX];
+ wait_queue_head_t raw_htc_read_queue[HTC_RAW_STREAM_NUM_MAX];
+ wait_queue_head_t raw_htc_write_queue[HTC_RAW_STREAM_NUM_MAX];
+ raw_htc_buffer *raw_htc_read_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_READ_BUFFERS_NUM];
+ raw_htc_buffer *raw_htc_write_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_WRITE_BUFFERS_NUM];
+ A_BOOL write_buffer_available[HTC_RAW_STREAM_NUM_MAX];
+ A_BOOL read_buffer_available[HTC_RAW_STREAM_NUM_MAX];
+#endif
+ A_BOOL arRawIfInit;
+ int arDeviceIndex;
+ COMMON_CREDIT_STATE_INFO arCreditStateInfo;
+ A_BOOL arWMIControlEpFull;
+ A_BOOL dbgLogFetchInProgress;
+ A_UCHAR log_buffer[DBGLOG_HOST_LOG_BUFFER_SIZE];
+ A_UINT32 log_cnt;
+ A_UINT32 dbglog_init_done;
+ A_UINT32 arConnectCtrlFlags;
+ A_UINT32 scan_complete;
+#ifdef USER_KEYS
+ A_INT32 user_savedkeys_stat;
+ A_UINT32 user_key_ctrl;
+ struct USER_SAVEDKEYS user_saved_keys;
+#endif
+} AR_SOFTC_T;
+
+
+#define arWMIStream2EndpointID(ar,wmi) (ar)->arWmi2EpMapping[(wmi)]
+#define arSetWMIStream2EndpointIDMap(ar,wmi,ep) \
+{ (ar)->arWmi2EpMapping[(wmi)] = (ep); \
+ (ar)->arEp2WmiMapping[(ep)] = (wmi); }
+#define arEndpoint2WMIStreamID(ar,ep) (ar)->arEp2WmiMapping[(ep)]
+
+#define arRawIfEnabled(ar) (ar)->arRawIfInit
+#define arRawStream2EndpointID(ar,raw) (ar)->arRaw2EpMapping[(raw)]
+#define arSetRawStream2EndpointIDMap(ar,raw,ep) \
+{ (ar)->arRaw2EpMapping[(raw)] = (ep); \
+ (ar)->arEp2RawMapping[(ep)] = (raw); }
+#define arEndpoint2RawStreamID(ar,ep) (ar)->arEp2RawMapping[(ep)]
+
+struct ar_giwscan_param {
+ char *current_ev;
+ char *end_buf;
+ A_BOOL firstPass;
+};
+
+#define AR6000_STAT_INC(ar, stat) (ar->arNetStats.stat++)
+
+#define AR6000_SPIN_LOCK(lock, param) do { \
+ if (irqs_disabled()) { \
+ AR_DEBUG_PRINTF("IRQs disabled:AR6000_LOCK\n"); \
+ } \
+ spin_lock_bh(lock); \
+} while (0)
+
+#define AR6000_SPIN_UNLOCK(lock, param) do { \
+ if (irqs_disabled()) { \
+ AR_DEBUG_PRINTF("IRQs disabled: AR6000_UNLOCK\n"); \
+ } \
+ spin_unlock_bh(lock); \
+} while (0)
+
+int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+int ar6000_ioctl_dispatcher(struct net_device *dev, struct ifreq *rq, int cmd);
+void ar6000_ioctl_iwsetup(struct iw_handler_def *def);
+void ar6000_gpio_init(void);
+void ar6000_init_profile_info(AR_SOFTC_T *ar);
+void ar6000_install_static_wep_keys(AR_SOFTC_T *ar);
+int ar6000_init(struct net_device *dev);
+int ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar);
+A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar);
+
+#ifdef HTC_RAW_INTERFACE
+
+#ifndef __user
+#define __user
+#endif
+
+int ar6000_htc_raw_open(AR_SOFTC_T *ar);
+int ar6000_htc_raw_close(AR_SOFTC_T *ar);
+ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar,
+ HTC_RAW_STREAM_ID StreamID,
+ char __user *buffer, size_t count);
+ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar,
+ HTC_RAW_STREAM_ID StreamID,
+ char __user *buffer, size_t count);
+
+#endif /* HTC_RAW_INTERFACE */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _AR6000_H_ */
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+#ifdef HTC_RAW_INTERFACE
+
+static void
+ar6000_htc_raw_read_cb(void *Context, HTC_PACKET *pPacket)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+ raw_htc_buffer *busy;
+ HTC_RAW_STREAM_ID streamID;
+
+ busy = (raw_htc_buffer *)pPacket->pPktContext;
+ A_ASSERT(busy != NULL);
+
+ if (pPacket->Status == A_ECANCELED) {
+ /*
+ * HTC provides A_ECANCELED status when it doesn't want to be refilled
+ * (probably due to a shutdown)
+ */
+ return;
+ }
+
+ streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
+ A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
+
+#ifdef CF
+ if (down_trylock(&ar->raw_htc_read_sem[streamID])) {
+#else
+ if (down_interruptible(&ar->raw_htc_read_sem[streamID])) {
+#endif /* CF */
+ AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
+ }
+
+ A_ASSERT((pPacket->Status != A_OK) ||
+ (pPacket->pBuffer == (busy->data + HTC_HEADER_LEN)));
+
+ busy->length = pPacket->ActualLength + HTC_HEADER_LEN;
+ busy->currPtr = HTC_HEADER_LEN;
+ ar->read_buffer_available[streamID] = TRUE;
+ //AR_DEBUG_PRINTF("raw read cb: 0x%X 0x%X \n", busy->currPtr,busy->length);
+ up(&ar->raw_htc_read_sem[streamID]);
+
+ /* Signal the waiting process */
+ AR_DEBUG2_PRINTF("Waking up the StreamID(%d) read process\n", streamID);
+ wake_up_interruptible(&ar->raw_htc_read_queue[streamID]);
+}
+
+static void
+ar6000_htc_raw_write_cb(void *Context, HTC_PACKET *pPacket)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
+ raw_htc_buffer *free;
+ HTC_RAW_STREAM_ID streamID;
+
+ free = (raw_htc_buffer *)pPacket->pPktContext;
+ A_ASSERT(free != NULL);
+
+ if (pPacket->Status == A_ECANCELED) {
+ /*
+ * HTC provides A_ECANCELED status when it doesn't want to be refilled
+ * (probably due to a shutdown)
+ */
+ return;
+ }
+
+ streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint);
+ A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED);
+
+#ifdef CF
+ if (down_trylock(&ar->raw_htc_write_sem[streamID])) {
+#else
+ if (down_interruptible(&ar->raw_htc_write_sem[streamID])) {
+#endif
+ AR_DEBUG2_PRINTF("Unable to down the semaphore\n");
+ }
+
+ A_ASSERT(pPacket->pBuffer == (free->data + HTC_HEADER_LEN));
+
+ free->length = 0;
+ ar->write_buffer_available[streamID] = TRUE;
+ up(&ar->raw_htc_write_sem[streamID]);
+
+ /* Signal the waiting process */
+ AR_DEBUG2_PRINTF("Waking up the StreamID(%d) write process\n", streamID);
+ wake_up_interruptible(&ar->raw_htc_write_queue[streamID]);
+}
+
+/* connect to a service */
+static A_STATUS ar6000_connect_raw_service(AR_SOFTC_T *ar,
+ HTC_RAW_STREAM_ID StreamID)
+{
+ A_STATUS status;
+ HTC_SERVICE_CONNECT_RESP response;
+ A_UINT8 streamNo;
+ HTC_SERVICE_CONNECT_REQ connect;
+
+ do {
+
+ A_MEMZERO(&connect,sizeof(connect));
+ /* pass the stream ID as meta data to the RAW streams service */
+ streamNo = (A_UINT8)StreamID;
+ connect.pMetaData = &streamNo;
+ connect.MetaDataLength = sizeof(A_UINT8);
+ /* these fields are the same for all endpoints */
+ connect.EpCallbacks.pContext = ar;
+ connect.EpCallbacks.EpTxComplete = ar6000_htc_raw_write_cb;
+ connect.EpCallbacks.EpRecv = ar6000_htc_raw_read_cb;
+ /* simple interface, we don't need these optional callbacks */
+ connect.EpCallbacks.EpRecvRefill = NULL;
+ connect.EpCallbacks.EpSendFull = NULL;
+ connect.EpCallbacks.EpSendAvail = NULL;
+ connect.MaxSendQueueDepth = RAW_HTC_WRITE_BUFFERS_NUM;
+
+ /* connect to the raw streams service, we may be able to get 1 or more
+ * connections, depending on WHAT is running on the target */
+ connect.ServiceID = HTC_RAW_STREAMS_SVC;
+
+ A_MEMZERO(&response,sizeof(response));
+
+ /* try to connect to the raw stream, it is okay if this fails with
+ * status HTC_SERVICE_NO_MORE_EP */
+ status = HTCConnectService(ar->arHtcTarget,
+ &connect,
+ &response);
+
+ if (A_FAILED(status)) {
+ if (response.ConnectRespCode == HTC_SERVICE_NO_MORE_EP) {
+ AR_DEBUG_PRINTF("HTC RAW , No more streams allowed \n");
+ status = A_OK;
+ }
+ break;
+ }
+
+ /* set endpoint mapping for the RAW HTC streams */
+ arSetRawStream2EndpointIDMap(ar,StreamID,response.Endpoint);
+
+ AR_DEBUG_PRINTF("HTC RAW : stream ID: %d, endpoint: %d\n",
+ StreamID, arRawStream2EndpointID(ar,StreamID));
+
+ } while (FALSE);
+
+ return status;
+}
+
+int ar6000_htc_raw_open(AR_SOFTC_T *ar)
+{
+ A_STATUS status;
+ int streamID, endPt, count2;
+ raw_htc_buffer *buffer;
+ HTC_SERVICE_ID servicepriority;
+
+ A_ASSERT(ar->arHtcTarget != NULL);
+
+ /* wait for target */
+ status = HTCWaitTarget(ar->arHtcTarget);
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF("HTCWaitTarget failed (%d)\n", status);
+ return -ENODEV;
+ }
+
+ for (endPt = 0; endPt < ENDPOINT_MAX; endPt++) {
+ ar->arEp2RawMapping[endPt] = HTC_RAW_STREAM_NOT_MAPPED;
+ }
+
+ for (streamID = HTC_RAW_STREAM_0; streamID < HTC_RAW_STREAM_NUM_MAX; streamID++) {
+ /* Initialize the data structures */
+ init_MUTEX(&ar->raw_htc_read_sem[streamID]);
+ init_MUTEX(&ar->raw_htc_write_sem[streamID]);
+ init_waitqueue_head(&ar->raw_htc_read_queue[streamID]);
+ init_waitqueue_head(&ar->raw_htc_write_queue[streamID]);
+
+ /* try to connect to the raw service */
+ status = ar6000_connect_raw_service(ar,streamID);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ if (arRawStream2EndpointID(ar,streamID) == 0) {
+ break;
+ }
+
+ for (count2 = 0; count2 < RAW_HTC_READ_BUFFERS_NUM; count2 ++) {
+ /* Initialize the receive buffers */
+ buffer = ar->raw_htc_write_buffer[streamID][count2];
+ memset(buffer, 0, sizeof(raw_htc_buffer));
+ buffer = ar->raw_htc_read_buffer[streamID][count2];
+ memset(buffer, 0, sizeof(raw_htc_buffer));
+
+ SET_HTC_PACKET_INFO_RX_REFILL(&buffer->HTCPacket,
+ buffer,
+ buffer->data,
+ AR6000_BUFFER_SIZE,
+ arRawStream2EndpointID(ar,streamID));
+
+ /* Queue buffers to HTC for receive */
+ if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != A_OK)
+ {
+ BMIInit();
+ return -EIO;
+ }
+ }
+
+ for (count2 = 0; count2 < RAW_HTC_WRITE_BUFFERS_NUM; count2 ++) {
+ /* Initialize the receive buffers */
+ buffer = ar->raw_htc_write_buffer[streamID][count2];
+ memset(buffer, 0, sizeof(raw_htc_buffer));
+ }
+
+ ar->read_buffer_available[streamID] = FALSE;
+ ar->write_buffer_available[streamID] = TRUE;
+ }
+
+ if (A_FAILED(status)) {
+ return -EIO;
+ }
+
+ AR_DEBUG_PRINTF("HTC RAW, number of streams the target supports: %d \n", streamID);
+
+ servicepriority = HTC_RAW_STREAMS_SVC; /* only 1 */
+
+ /* set callbacks and priority list */
+ HTCSetCreditDistribution(ar->arHtcTarget,
+ ar,
+ NULL, /* use default */
+ NULL, /* use default */
+ &servicepriority,
+ 1);
+
+ /* Start the HTC component */
+ if ((status = HTCStart(ar->arHtcTarget)) != A_OK) {
+ BMIInit();
+ return -EIO;
+ }
+
+ (ar)->arRawIfInit = TRUE;
+
+ return 0;
+}
+
+int ar6000_htc_raw_close(AR_SOFTC_T *ar)
+{
+ A_PRINTF("ar6000_htc_raw_close called \n");
+ HTCStop(ar->arHtcTarget);
+
+ /* reset the device */
+ ar6000_reset_device(ar->arHifDevice, ar->arTargetType);
+ /* Initialize the BMI component */
+ BMIInit();
+
+ return 0;
+}
+
+raw_htc_buffer *
+get_filled_buffer(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID)
+{
+ int count;
+ raw_htc_buffer *busy;
+
+ /* Check for data */
+ for (count = 0; count < RAW_HTC_READ_BUFFERS_NUM; count ++) {
+ busy = ar->raw_htc_read_buffer[StreamID][count];
+ if (busy->length) {
+ break;
+ }
+ }
+ if (busy->length) {
+ ar->read_buffer_available[StreamID] = TRUE;
+ } else {
+ ar->read_buffer_available[StreamID] = FALSE;
+ }
+
+ return busy;
+}
+
+ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
+ char __user *buffer, size_t length)
+{
+ int readPtr;
+ raw_htc_buffer *busy;
+
+ if (arRawStream2EndpointID(ar,StreamID) == 0) {
+ AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
+ return -EFAULT;
+ }
+
+ if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
+ return -ERESTARTSYS;
+ }
+
+ busy = get_filled_buffer(ar,StreamID);
+ while (!ar->read_buffer_available[StreamID]) {
+ up(&ar->raw_htc_read_sem[StreamID]);
+
+ /* Wait for the data */
+ AR_DEBUG2_PRINTF("Sleeping StreamID(%d) read process\n", StreamID);
+ if (wait_event_interruptible(ar->raw_htc_read_queue[StreamID],
+ ar->read_buffer_available[StreamID]))
+ {
+ return -EINTR;
+ }
+ if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) {
+ return -ERESTARTSYS;
+ }
+ busy = get_filled_buffer(ar,StreamID);
+ }
+
+ /* Read the data */
+ readPtr = busy->currPtr;
+ if (length > busy->length - HTC_HEADER_LEN) {
+ length = busy->length - HTC_HEADER_LEN;
+ }
+ if (copy_to_user(buffer, &busy->data[readPtr], length)) {
+ up(&ar->raw_htc_read_sem[StreamID]);
+ return -EFAULT;
+ }
+
+ busy->currPtr += length;
+
+ //AR_DEBUG_PRINTF("raw read ioctl: currPTR : 0x%X 0x%X \n", busy->currPtr,busy->length);
+
+ if (busy->currPtr == busy->length)
+ {
+ busy->currPtr = 0;
+ busy->length = 0;
+ HTC_PACKET_RESET_RX(&busy->HTCPacket);
+ //AR_DEBUG_PRINTF("raw read ioctl: ep for packet:%d \n", busy->HTCPacket.Endpoint);
+ HTCAddReceivePkt(ar->arHtcTarget, &busy->HTCPacket);
+ }
+ ar->read_buffer_available[StreamID] = FALSE;
+ up(&ar->raw_htc_read_sem[StreamID]);
+
+ return length;
+}
+
+static raw_htc_buffer *
+get_free_buffer(AR_SOFTC_T *ar, HTC_ENDPOINT_ID StreamID)
+{
+ int count;
+ raw_htc_buffer *free;
+
+ free = NULL;
+ for (count = 0; count < RAW_HTC_WRITE_BUFFERS_NUM; count ++) {
+ free = ar->raw_htc_write_buffer[StreamID][count];
+ if (free->length == 0) {
+ break;
+ }
+ }
+ if (!free->length) {
+ ar->write_buffer_available[StreamID] = TRUE;
+ } else {
+ ar->write_buffer_available[StreamID] = FALSE;
+ }
+
+ return free;
+}
+
+ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID,
+ char __user *buffer, size_t length)
+{
+ int writePtr;
+ raw_htc_buffer *free;
+
+ if (arRawStream2EndpointID(ar,StreamID) == 0) {
+ AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID);
+ return -EFAULT;
+ }
+
+ if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
+ return -ERESTARTSYS;
+ }
+
+ /* Search for a free buffer */
+ free = get_free_buffer(ar,StreamID);
+
+ /* Check if there is space to write else wait */
+ while (!ar->write_buffer_available[StreamID]) {
+ up(&ar->raw_htc_write_sem[StreamID]);
+
+ /* Wait for buffer to become free */
+ AR_DEBUG2_PRINTF("Sleeping StreamID(%d) write process\n", StreamID);
+ if (wait_event_interruptible(ar->raw_htc_write_queue[StreamID],
+ ar->write_buffer_available[StreamID]))
+ {
+ return -EINTR;
+ }
+ if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) {
+ return -ERESTARTSYS;
+ }
+ free = get_free_buffer(ar,StreamID);
+ }
+
+ /* Send the data */
+ writePtr = HTC_HEADER_LEN;
+ if (length > (AR6000_BUFFER_SIZE - HTC_HEADER_LEN)) {
+ length = AR6000_BUFFER_SIZE - HTC_HEADER_LEN;
+ }
+
+ if (copy_from_user(&free->data[writePtr], buffer, length)) {
+ up(&ar->raw_htc_read_sem[StreamID]);
+ return -EFAULT;
+ }
+
+ free->length = length;
+
+ SET_HTC_PACKET_INFO_TX(&free->HTCPacket,
+ free,
+ &free->data[writePtr],
+ length,
+ arRawStream2EndpointID(ar,StreamID),
+ AR6K_DATA_PKT_TAG);
+
+ HTCSendPkt(ar->arHtcTarget,&free->HTCPacket);
+
+ ar->write_buffer_available[StreamID] = FALSE;
+ up(&ar->raw_htc_write_sem[StreamID]);
+
+ return length;
+}
+#endif /* HTC_RAW_INTERFACE */
--- /dev/null
+#ifndef _AR6XAPI_LINUX_H
+#define _AR6XAPI_LINUX_H
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct ar6_softc;
+
+void ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap);
+A_UINT8 ar6000_iptos_to_userPriority(A_UINT8 *pkt);
+A_STATUS ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID);
+void ar6000_connect_event(struct ar6_softc *ar, A_UINT16 channel,
+ A_UINT8 *bssid, A_UINT16 listenInterval,
+ A_UINT16 beaconInterval, NETWORK_TYPE networkType,
+ A_UINT8 beaconIeLen, A_UINT8 assocReqLen,
+ A_UINT8 assocRespLen,A_UINT8 *assocInfo);
+void ar6000_disconnect_event(struct ar6_softc *ar, A_UINT8 reason,
+ A_UINT8 *bssid, A_UINT8 assocRespLen,
+ A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus);
+void ar6000_tkip_micerr_event(struct ar6_softc *ar, A_UINT8 keyid,
+ A_BOOL ismcast);
+void ar6000_bitrate_rx(void *devt, A_INT32 rateKbps);
+void ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList);
+void ar6000_regDomain_event(struct ar6_softc *ar, A_UINT32 regCode);
+void ar6000_txPwr_rx(void *devt, A_UINT8 txPwr);
+void ar6000_keepalive_rx(void *devt, A_UINT8 configured);
+void ar6000_neighborReport_event(struct ar6_softc *ar, int numAps,
+ WMI_NEIGHBOR_INFO *info);
+void ar6000_set_numdataendpts(struct ar6_softc *ar, A_UINT32 num);
+void ar6000_scanComplete_event(struct ar6_softc *ar, A_STATUS status);
+void ar6000_targetStats_event(struct ar6_softc *ar, WMI_TARGET_STATS *pStats);
+void ar6000_rssiThreshold_event(struct ar6_softc *ar,
+ WMI_RSSI_THRESHOLD_VAL newThreshold,
+ A_INT16 rssi);
+void ar6000_reportError_event(struct ar6_softc *, WMI_TARGET_ERROR_VAL errorVal);
+void ar6000_cac_event(struct ar6_softc *ar, A_UINT8 ac, A_UINT8 cac_indication,
+ A_UINT8 statusCode, A_UINT8 *tspecSuggestion);
+void ar6000_hbChallengeResp_event(struct ar6_softc *, A_UINT32 cookie, A_UINT32 source);
+void
+ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl);
+
+void
+ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p);
+
+void
+ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters,
+ WMI_GET_WOW_LIST_REPLY *wow_reply);
+
+void ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID,
+ WMI_PMKID *pmkidList);
+
+void ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values);
+void ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value);
+void ar6000_gpio_ack_rx(void);
+
+void ar6000_dbglog_init_done(struct ar6_softc *ar);
+
+#ifdef SEND_EVENT_TO_APP
+void ar6000_send_event_to_app(struct ar6_softc *ar, A_UINT16 eventId, A_UINT8 *datap, int len);
+#endif
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+void ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len);
+#endif
+
+void ar6000_tx_retry_err_event(void *devt);
+
+void ar6000_snrThresholdEvent_rx(void *devt,
+ WMI_SNR_THRESHOLD_VAL newThreshold,
+ A_UINT8 snr);
+
+void ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL range, A_UINT8 lqVal);
+
+
+void ar6000_ratemask_rx(void *devt, A_UINT16 ratemask);
+
+A_STATUS ar6000_get_driver_cfg(struct net_device *dev,
+ A_UINT16 cfgParam,
+ void *result);
+void ar6000_bssInfo_event_rx(struct ar6_softc *ar, A_UINT8 *data, int len);
+
+void ar6000_dbglog_event(struct ar6_softc *ar, A_UINT32 dropped,
+ A_INT8 *buffer, A_UINT32 length);
+
+int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar);
+
+void ar6000_indicate_tx_activity(void *devt, A_UINT8 trafficClass, A_BOOL Active);
+
+void ar6000_dset_open_req(void *devt,
+ A_UINT32 id,
+ A_UINT32 targ_handle,
+ A_UINT32 targ_reply_fn,
+ A_UINT32 targ_reply_arg);
+void ar6000_dset_close(void *devt, A_UINT32 access_cookie);
+void ar6000_dset_data_req(void *devt,
+ A_UINT32 access_cookie,
+ A_UINT32 offset,
+ A_UINT32 length,
+ A_UINT32 targ_buf,
+ A_UINT32 targ_reply_fn,
+ A_UINT32 targ_reply_arg);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHDRV_LINUX_H
+#define _ATHDRV_LINUX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+ * There are two types of ioctl's here: Standard ioctls and
+ * eXtended ioctls. All extended ioctls (XIOCTL) are multiplexed
+ * off of the single ioctl command, AR6000_IOCTL_EXTENDED. The
+ * arguments for every XIOCTL starts with a 32-bit command word
+ * that is used to select which extended ioctl is in use. After
+ * the command word are command-specific arguments.
+ */
+
+/* Linux standard Wireless Extensions, private ioctl interfaces */
+#define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0)
+#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1)
+#define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+2)
+#define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+3)
+#define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+4)
+#define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+5)
+#define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+6)
+#define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+7)
+//#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+7)
+#define IEEE80211_IOCTL_ADDPMKID (SIOCIWFIRSTPRIV+8)
+//#define IEEE80211_IOCTL_SETAUTHALG (SIOCIWFIRSTPRIV+10)
+#define IEEE80211_IOCTL_LASTONE (SIOCIWFIRSTPRIV+9)
+
+
+
+/* ====WMI Ioctls==== */
+/*
+ *
+ * Many ioctls simply provide WMI services to application code:
+ * an application makes such an ioctl call with a set of arguments
+ * that are packaged into the corresponding WMI message, and sent
+ * to the Target.
+ */
+
+#define AR6000_IOCTL_WMI_GETREV (SIOCIWFIRSTPRIV+10)
+/*
+ * arguments:
+ * ar6000_version *revision
+ */
+
+#define AR6000_IOCTL_WMI_SETPWR (SIOCIWFIRSTPRIV+11)
+/*
+ * arguments:
+ * WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h)
+ * uses: WMI_SET_POWER_MODE_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETSCAN (SIOCIWFIRSTPRIV+12)
+/*
+ * arguments:
+ * WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h)
+ * uses: WMI_SET_SCAN_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETLISTENINT (SIOCIWFIRSTPRIV+13)
+/*
+ * arguments:
+ * UINT32 listenInterval
+ * uses: WMI_SET_LISTEN_INT_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SETBSSFILTER (SIOCIWFIRSTPRIV+14)
+/*
+ * arguments:
+ * WMI_BSS_FILTER filter (see include/wmi.h)
+ * uses: WMI_SET_BSS_FILTER_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS (SIOCIWFIRSTPRIV+16)
+/*
+ * arguments:
+ * WMI_CHANNEL_PARAMS_CMD chParams
+ * uses: WMI_SET_CHANNEL_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_PROBEDSSID (SIOCIWFIRSTPRIV+17)
+/*
+ * arguments:
+ * WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h)
+ * uses: WMI_SETPROBED_SSID_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_PMPARAMS (SIOCIWFIRSTPRIV+18)
+/*
+ * arguments:
+ * WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h)
+ * uses: WMI_SET_POWER_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_BADAP (SIOCIWFIRSTPRIV+19)
+/*
+ * arguments:
+ * WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h)
+ * uses: WMI_ADD_BAD_AP_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_GET_QOS_QUEUE (SIOCIWFIRSTPRIV+20)
+/*
+ * arguments:
+ * ar6000_queuereq queueRequest (see below)
+ */
+
+#define AR6000_IOCTL_WMI_CREATE_QOS (SIOCIWFIRSTPRIV+21)
+/*
+ * arguments:
+ * WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h)
+ * uses: WMI_CREATE_PSTREAM_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_DELETE_QOS (SIOCIWFIRSTPRIV+22)
+/*
+ * arguments:
+ * WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h)
+ * uses: WMI_DELETE_PSTREAM_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD (SIOCIWFIRSTPRIV+23)
+/*
+ * arguments:
+ * WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24)
+/*
+ * arguments:
+ * WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h)
+ * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_GET_TARGET_STATS (SIOCIWFIRSTPRIV+25)
+/*
+ * arguments:
+ * TARGET_STATS *targetStats (see below)
+ * uses: WMI_GET_STATISTICS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ASSOC_INFO (SIOCIWFIRSTPRIV+26)
+/*
+ * arguments:
+ * WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd
+ * uses: WMI_SET_ASSOC_INFO_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS (SIOCIWFIRSTPRIV+27)
+/*
+ * arguments:
+ * WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h)
+ * uses: WMI_SET_ACCESS_PARAMS_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_BMISS_TIME (SIOCIWFIRSTPRIV+28)
+/*
+ * arguments:
+ * UINT32 beaconMissTime
+ * uses: WMI_SET_BMISS_TIME_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT (SIOCIWFIRSTPRIV+29)
+/*
+ * arguments:
+ * WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h)
+ * uses: WMI_SET_DISC_TIMEOUT_CMDID
+ */
+
+#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS (SIOCIWFIRSTPRIV+30)
+/*
+ * arguments:
+ * WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd
+ * uses: WMI_SET_IBSS_PM_CAPS_CMDID
+ */
+
+/*
+ * There is a very small space available for driver-private
+ * wireless ioctls. In order to circumvent this limitation,
+ * we multiplex a bunch of ioctls (XIOCTLs) on top of a
+ * single AR6000_IOCTL_EXTENDED ioctl.
+ */
+#define AR6000_IOCTL_EXTENDED (SIOCIWFIRSTPRIV+31)
+
+
+/* ====BMI Extended Ioctls==== */
+
+#define AR6000_XIOCTL_BMI_DONE 1
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_BMI_DONE)
+ * uses: BMI_DONE
+ */
+
+#define AR6000_XIOCTL_BMI_READ_MEMORY 2
+/*
+ * arguments:
+ * union {
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY)
+ * UINT32 address
+ * UINT32 length
+ * }
+ * char results[length]
+ * }
+ * uses: BMI_READ_MEMORY
+ */
+
+#define AR6000_XIOCTL_BMI_WRITE_MEMORY 3
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY)
+ * UINT32 address
+ * UINT32 length
+ * char data[length]
+ * uses: BMI_WRITE_MEMORY
+ */
+
+#define AR6000_XIOCTL_BMI_EXECUTE 4
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE)
+ * UINT32 TargetAddress
+ * UINT32 parameter
+ * uses: BMI_EXECUTE
+ */
+
+#define AR6000_XIOCTL_BMI_SET_APP_START 5
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START)
+ * UINT32 TargetAddress
+ * uses: BMI_SET_APP_START
+ */
+
+#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER 6
+/*
+ * arguments:
+ * union {
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER)
+ * UINT32 TargetAddress, 32-bit aligned
+ * }
+ * UINT32 result
+ * }
+ * uses: BMI_READ_SOC_REGISTER
+ */
+
+#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER 7
+/*
+ * arguments:
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER)
+ * UINT32 TargetAddress, 32-bit aligned
+ * UINT32 newValue
+ * }
+ * uses: BMI_WRITE_SOC_REGISTER
+ */
+
+#define AR6000_XIOCTL_BMI_TEST 8
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_BMI_TEST)
+ * UINT32 address
+ * UINT32 length
+ * UINT32 count
+ */
+
+
+
+/* Historical Host-side DataSet support */
+#define AR6000_XIOCTL_UNUSED9 9
+#define AR6000_XIOCTL_UNUSED10 10
+#define AR6000_XIOCTL_UNUSED11 11
+
+/* ====Misc Extended Ioctls==== */
+
+#define AR6000_XIOCTL_FORCE_TARGET_RESET 12
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET)
+ */
+
+
+#ifdef HTC_RAW_INTERFACE
+/* HTC Raw Interface Ioctls */
+#define AR6000_XIOCTL_HTC_RAW_OPEN 13
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN)
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_CLOSE 14
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE)
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_READ 15
+/*
+ * arguments:
+ * union {
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ)
+ * UINT32 mailboxID
+ * UINT32 length
+ * }
+ * results[length]
+ * }
+ */
+
+#define AR6000_XIOCTL_HTC_RAW_WRITE 16
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE)
+ * UINT32 mailboxID
+ * UINT32 length
+ * char buffer[length]
+ */
+#endif /* HTC_RAW_INTERFACE */
+
+#define AR6000_XIOCTL_CHECK_TARGET_READY 17
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY)
+ */
+
+
+
+/* ====GPIO (General Purpose I/O) Extended Ioctls==== */
+
+#define AR6000_XIOCTL_GPIO_OUTPUT_SET 18
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET)
+ * ar6000_gpio_output_set_cmd_s (see below)
+ * uses: WMIX_GPIO_OUTPUT_SET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INPUT_GET 19
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET)
+ * uses: WMIX_GPIO_INPUT_GET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_REGISTER_SET 20
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET)
+ * ar6000_gpio_register_cmd_s (see below)
+ * uses: WMIX_GPIO_REGISTER_SET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_REGISTER_GET 21
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET)
+ * ar6000_gpio_register_cmd_s (see below)
+ * uses: WMIX_GPIO_REGISTER_GET_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INTR_ACK 22
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK)
+ * ar6000_cpio_intr_ack_cmd_s (see below)
+ * uses: WMIX_GPIO_INTR_ACK_CMDID
+ */
+
+#define AR6000_XIOCTL_GPIO_INTR_WAIT 23
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT)
+ */
+
+
+
+/* ====more wireless commands==== */
+
+#define AR6000_XIOCTL_SET_ADHOC_BSSID 24
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID)
+ * WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h)
+ */
+
+#define AR6000_XIOCTL_SET_OPT_MODE 25
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE)
+ * WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h)
+ * uses: WMI_SET_OPT_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_OPT_SEND_FRAME 26
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME)
+ * WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h)
+ * uses: WMI_OPT_TX_FRAME_CMDID
+ */
+
+#define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL 27
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL)
+ * WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h)
+ * uses: WMI_SET_BEACON_INT_CMDID
+ */
+
+
+#define IEEE80211_IOCTL_SETAUTHALG 28
+
+
+#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE 29
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE)
+ * WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h)
+ * uses: WMI_SET_VOICE_PKT_SIZE_CMDID
+ */
+
+
+#define AR6000_XIOCTL_SET_MAX_SP 30
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP)
+ * WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h)
+ * uses: WMI_SET_MAX_SP_LEN_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_GET_ROAM_TBL 31
+
+#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL 32
+
+#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS 33
+
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS)
+ * WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h)
+ * WMI_SET_POWERSAVE_TIMERS_CMDID
+ */
+
+#define AR6000_XIOCTRL_WMI_GET_POWER_MODE 34
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE)
+ */
+
+#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE 35
+typedef enum {
+ WLAN_DISABLED,
+ WLAN_ENABLED
+} AR6000_WLAN_STATE;
+/*
+ * arguments:
+ * enable/disable
+ */
+
+#define AR6000_XIOCTL_WMI_GET_ROAM_DATA 36
+
+#define AR6000_XIOCTL_WMI_SETRETRYLIMITS 37
+/*
+ * arguments:
+ * WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd
+ * uses: WMI_SET_RETRY_LIMITS_CMDID
+ */
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/* ====extended commands for radio test ==== */
+
+#define AR6000_XIOCTL_TCMD_CONT_TX 38
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX)
+ * WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h)
+ * uses: WMI_TCMD_CONT_TX_CMDID
+ */
+
+#define AR6000_XIOCTL_TCMD_CONT_RX 39
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX)
+ * WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h)
+ * uses: WMI_TCMD_CONT_RX_CMDID
+ */
+
+#define AR6000_XIOCTL_TCMD_PM 40
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_TCMD_PM)
+ * WMI_TCMD_PM_CMD pmCmd (see include/wmi.h)
+ * uses: WMI_TCMD_PM_CMDID
+ */
+
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+#define AR6000_XIOCTL_WMI_STARTSCAN 41
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN)
+ * UINT8 scanType
+ * UINT8 scanConnected
+ * A_BOOL forceFgScan
+ * uses: WMI_START_SCAN_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SETFIXRATES 42
+
+#define AR6000_XIOCTL_WMI_GETFIXRATES 43
+
+
+#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD 44
+/*
+ * arguments:
+ * WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_CLR_RSSISNR 45
+/*
+ * arguments:
+ * WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_CLR_RSSISNR_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD 46
+/*
+ * arguments:
+ * WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h)
+ * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_RTS 47
+/*
+ * arguments:
+ * WMI_SET_RTS_MODE_CMD (see include/wmi.h)
+ * uses: WMI_SET_RTS_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_LPREAMBLE 48
+
+#define AR6000_XIOCTL_WMI_SET_AUTHMODE 49
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE)
+ * UINT8 mode
+ * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_SET_REASSOCMODE 50
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM)
+ * UINT8 mode
+ * uses: WMI_SET_WMM_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_WMM 51
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS)
+ * UINT32 frequency
+ * UINT8 threshold
+ */
+#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS 52
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP)
+ * UINT32 cookie
+ */
+#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP 53
+
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD)
+ * UINT32 regDomain
+ */
+#define AR6000_XIOCTL_WMI_GET_RD 54
+
+#define AR6000_XIOCTL_DIAG_READ 55
+
+#define AR6000_XIOCTL_DIAG_WRITE 56
+
+/*
+ * arguments cmd (AR6000_XIOCTL_SET_TXOP)
+ * WMI_TXOP_CFG txopEnable
+ */
+#define AR6000_XIOCTL_WMI_SET_TXOP 57
+
+#ifdef USER_KEYS
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS)
+ * UINT32 keyOpCtrl
+ * uses AR6000_USER_SETKEYS_INFO
+ */
+#define AR6000_XIOCTL_USER_SETKEYS 58
+#endif /* USER_KEYS */
+
+#define AR6000_XIOCTL_WMI_SET_KEEPALIVE 59
+/*
+ * arguments:
+ * UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE)
+ * UINT8 keepaliveInterval
+ * uses: WMI_SET_KEEPALIVE_CMDID
+ */
+
+#define AR6000_XIOCTL_WMI_GET_KEEPALIVE 60
+/*
+ * arguments:
+ * UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE)
+ * UINT8 keepaliveInterval
+ * A_BOOL configured
+ * uses: WMI_GET_KEEPALIVE_CMDID
+ */
+
+/* ====ROM Patching Extended Ioctls==== */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL 61
+/*
+ * arguments:
+ * union {
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL)
+ * UINT32 ROM Address
+ * UINT32 RAM Address
+ * UINT32 number of bytes
+ * UINT32 activate? (0 or 1)
+ * }
+ * A_UINT32 resulting rompatch ID
+ * }
+ * uses: BMI_ROMPATCH_INSTALL
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL 62
+/*
+ * arguments:
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL)
+ * UINT32 rompatch ID
+ * }
+ * uses: BMI_ROMPATCH_UNINSTALL
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE 63
+/*
+ * arguments:
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE)
+ * UINT32 rompatch count
+ * UINT32 rompatch IDs[rompatch count]
+ * }
+ * uses: BMI_ROMPATCH_ACTIVATE
+ */
+
+#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE 64
+/*
+ * arguments:
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE)
+ * UINT32 rompatch count
+ * UINT32 rompatch IDs[rompatch count]
+ * }
+ * uses: BMI_ROMPATCH_DEACTIVATE
+ */
+
+#define AR6000_XIOCTL_WMI_SET_APPIE 65
+/*
+ * arguments:
+ * struct {
+ * UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE)
+ * UINT32 app_frmtype;
+ * UINT32 app_buflen;
+ * UINT8 app_buf[];
+ * }
+ */
+#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER 66
+/*
+ * arguments:
+ * A_UINT32 filter_type;
+ */
+
+#define AR6000_XIOCTL_DBGLOG_CFG_MODULE 67
+
+#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS 68
+
+#define AR6000_XIOCTL_WMI_SET_WSC_STATUS 70
+/*
+ * arguments:
+ * A_UINT32 wsc_status;
+ * (WSC_REG_INACTIVE or WSC_REG_ACTIVE)
+ */
+
+/*
+ * arguments:
+ * struct {
+ * A_UINT8 streamType;
+ * A_UINT8 status;
+ * }
+ * uses: WMI_SET_BT_STATUS_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_BT_STATUS 71
+
+/*
+ * arguments:
+ * struct {
+ * A_UINT8 paramType;
+ * union {
+ * A_UINT8 noSCOPkts;
+ * BT_PARAMS_A2DP a2dpParams;
+ * BT_COEX_REGS regs;
+ * };
+ * }
+ * uses: WMI_SET_BT_PARAM_CMDID
+ */
+#define AR6000_XIOCTL_WMI_SET_BT_PARAMS 72
+
+#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE 73
+#define AR6000_XIOCTL_WMI_SET_WOW_MODE 74
+#define AR6000_XIOCTL_WMI_GET_WOW_LIST 75
+#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN 76
+#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN 77
+
+
+
+#define AR6000_XIOCTL_TARGET_INFO 78
+/*
+ * arguments:
+ * UINT32 cmd (AR6000_XIOCTL_TARGET_INFO)
+ * A_UINT32 TargetVersion (returned)
+ * A_UINT32 TargetType (returned)
+ * (See also bmi_msg.h target_ver and target_type)
+ */
+
+#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE 79
+/*
+ * arguments:
+ * none
+ */
+
+#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE 80
+/*
+ * This ioctl is used to emulate traffic activity
+ * timeouts. Activity/inactivity will trigger the driver
+ * to re-balance credits.
+ *
+ * arguments:
+ * ar6000_traffic_activity_change
+ */
+
+#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS 81
+/*
+ * This ioctl is used to set the connect control flags
+ *
+ * arguments:
+ * A_UINT32 connectCtrlFlags
+ */
+
+#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS 82
+/*
+ * This IOCTL sets any Authentication,Key Management and Protection
+ * related parameters. This is used along with the information set in
+ * Connect Command.
+ * Currently this enables Multiple PMKIDs to an AP.
+ *
+ * arguments:
+ * struct {
+ * A_UINT32 akmpInfo;
+ * }
+ * uses: WMI_SET_AKMP_PARAMS_CMD
+ */
+
+#define AR6000_XIOCTL_WMI_GET_PMKID_LIST 83
+
+#define AR6000_XIOCTL_WMI_SET_PMKID_LIST 84
+/*
+ * This IOCTL is used to set a list of PMKIDs. This list of
+ * PMKIDs is used in the [Re]AssocReq Frame. This list is used
+ * only if the MultiPMKID option is enabled via the
+ * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS IOCTL.
+ *
+ * arguments:
+ * struct {
+ * A_UINT32 numPMKID;
+ * WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
+ * }
+ * uses: WMI_SET_PMKIDLIST_CMD
+ */
+
+/* Historical DSETPATCH support for INI patches */
+#define AR6000_XIOCTL_UNUSED90 90
+
+
+
+/* used by AR6000_IOCTL_WMI_GETREV */
+struct ar6000_version {
+ A_UINT32 host_ver;
+ A_UINT32 target_ver;
+};
+
+/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */
+struct ar6000_queuereq {
+ A_UINT8 trafficClass;
+ A_UINT16 activeTsids;
+};
+
+/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */
+typedef struct targetStats_t {
+ A_UINT64 tx_packets;
+ A_UINT64 tx_bytes;
+ A_UINT64 tx_unicast_pkts;
+ A_UINT64 tx_unicast_bytes;
+ A_UINT64 tx_multicast_pkts;
+ A_UINT64 tx_multicast_bytes;
+ A_UINT64 tx_broadcast_pkts;
+ A_UINT64 tx_broadcast_bytes;
+ A_UINT64 tx_rts_success_cnt;
+ A_UINT64 tx_packet_per_ac[4];
+
+ A_UINT64 tx_errors;
+ A_UINT64 tx_failed_cnt;
+ A_UINT64 tx_retry_cnt;
+ A_UINT64 tx_rts_fail_cnt;
+ A_INT32 tx_unicast_rate;
+ A_UINT64 rx_packets;
+ A_UINT64 rx_bytes;
+ A_UINT64 rx_unicast_pkts;
+ A_UINT64 rx_unicast_bytes;
+ A_UINT64 rx_multicast_pkts;
+ A_UINT64 rx_multicast_bytes;
+ A_UINT64 rx_broadcast_pkts;
+ A_UINT64 rx_broadcast_bytes;
+ A_UINT64 rx_fragment_pkt;
+
+ A_UINT64 rx_errors;
+ A_UINT64 rx_crcerr;
+ A_UINT64 rx_key_cache_miss;
+ A_UINT64 rx_decrypt_err;
+ A_UINT64 rx_duplicate_frames;
+ A_INT32 rx_unicast_rate;
+
+ A_UINT64 tkip_local_mic_failure;
+ A_UINT64 tkip_counter_measures_invoked;
+ A_UINT64 tkip_replays;
+ A_UINT64 tkip_format_errors;
+ A_UINT64 ccmp_format_errors;
+ A_UINT64 ccmp_replays;
+
+ A_UINT64 power_save_failure_cnt;
+ A_INT16 noise_floor_calibation;
+
+ A_UINT64 cs_bmiss_cnt;
+ A_UINT64 cs_lowRssi_cnt;
+ A_UINT64 cs_connect_cnt;
+ A_UINT64 cs_disconnect_cnt;
+ A_UINT8 cs_aveBeacon_snr;
+ A_INT16 cs_aveBeacon_rssi;
+ A_UINT8 cs_lastRoam_msec;
+ A_UINT8 cs_snr;
+ A_INT16 cs_rssi;
+
+ A_UINT32 lq_val;
+
+ A_UINT32 wow_num_pkts_dropped;
+ A_UINT8 wow_num_host_pkt_wakeups;
+ A_UINT8 wow_num_host_event_wakeups;
+ A_UINT16 wow_num_events_discarded;
+
+}TARGET_STATS;
+
+typedef struct targetStats_cmd_t {
+ TARGET_STATS targetStats;
+ int clearStats;
+} TARGET_STATS_CMD;
+
+/* used by AR6000_XIOCTL_USER_SETKEYS */
+
+/*
+ * Setting this bit to 1 doesnot initialize the RSC on the firmware
+ */
+#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL 1
+#define AR6000_USER_SETKEYS_RSC_UNCHANGED 0x00000002
+
+typedef struct {
+ A_UINT32 keyOpCtrl; /* Bit Map of Key Mgmt Ctrl Flags */
+} AR6000_USER_SETKEYS_INFO;
+
+
+/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */
+struct ar6000_gpio_output_set_cmd_s {
+ A_UINT32 set_mask;
+ A_UINT32 clear_mask;
+ A_UINT32 enable_mask;
+ A_UINT32 disable_mask;
+};
+
+/*
+ * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET
+ */
+struct ar6000_gpio_register_cmd_s {
+ A_UINT32 gpioreg_id;
+ A_UINT32 value;
+};
+
+/* used by AR6000_XIOCTL_GPIO_INTR_ACK */
+struct ar6000_gpio_intr_ack_cmd_s {
+ A_UINT32 ack_mask;
+};
+
+/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */
+struct ar6000_gpio_intr_wait_cmd_s {
+ A_UINT32 intr_mask;
+ A_UINT32 input_values;
+};
+
+/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */
+typedef struct ar6000_dbglog_module_config_s {
+ A_UINT32 valid;
+ A_UINT16 mmask;
+ A_UINT16 tsr;
+ A_BOOL rep;
+ A_UINT16 size;
+} DBGLOG_MODULE_CONFIG;
+
+typedef struct user_rssi_thold_t {
+ A_INT16 tag;
+ A_INT16 rssi;
+} USER_RSSI_THOLD;
+
+typedef struct user_rssi_params_t {
+ A_UINT8 weight;
+ A_UINT32 pollTime;
+ USER_RSSI_THOLD tholds[12];
+} USER_RSSI_PARAMS;
+
+/*
+ * Host driver may have some config parameters. Typically, these
+ * config params are one time config parameters. These could
+ * correspond to any of the underlying modules. Host driver exposes
+ * an api for the underlying modules to get this config.
+ */
+#define AR6000_DRIVER_CFG_BASE 0x8000
+
+/* Should driver perform wlan node caching? */
+#define AR6000_DRIVER_CFG_GET_WLANNODECACHING 0x8001
+/*Should we log raw WMI msgs */
+#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS 0x8002
+
+/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */
+struct ar6000_diag_window_cmd_s {
+ unsigned int addr;
+ unsigned int value;
+};
+
+
+struct ar6000_traffic_activity_change {
+ A_UINT32 StreamID; /* stream ID to indicate activity change */
+ A_UINT32 Active; /* active (1) or inactive (0) */
+};
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/athtypes_linux.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHTYPES_LINUX_H_
+#define _ATHTYPES_LINUX_H_
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#endif
+
+typedef int8_t A_INT8;
+typedef int16_t A_INT16;
+typedef int32_t A_INT32;
+typedef int64_t A_INT64;
+
+typedef u_int8_t A_UINT8;
+typedef u_int16_t A_UINT16;
+typedef u_int32_t A_UINT32;
+typedef u_int64_t A_UINT64;
+
+typedef int A_BOOL;
+typedef char A_CHAR;
+typedef unsigned char A_UCHAR;
+typedef unsigned long A_ATH_TIMER;
+
+
+#endif /* _ATHTYPES_LINUX_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _CONFIG_LINUX_H_
+#define _CONFIG_LINUX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Host-side GPIO support is optional.
+ * If run-time access to GPIO pins is not required, then
+ * this should be changed to #undef.
+ */
+#define CONFIG_HOST_GPIO_SUPPORT
+
+/*
+ * Host side Test Command support
+ */
+#define CONFIG_HOST_TCMD_SUPPORT
+
+#define USE_4BYTE_REGISTER_ACCESS
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _DEBUG_LINUX_H_
+#define _DEBUG_LINUX_H_
+
+#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING)
+
+extern A_UINT32 g_dbg_flags;
+
+#define DBGFMT "%s() : "
+#define DBGARG __func__
+#define DBGFN A_PRINTF
+
+/* ------- Debug related stuff ------- */
+enum {
+ ATH_DEBUG_SEND = 0x0001,
+ ATH_DEBUG_RECV = 0x0002,
+ ATH_DEBUG_SYNC = 0x0004,
+ ATH_DEBUG_DUMP = 0x0008,
+ ATH_DEBUG_IRQ = 0x0010,
+ ATH_DEBUG_TRC = 0x0020,
+ ATH_DEBUG_WARN = 0x0040,
+ ATH_DEBUG_ERR = 0x0080,
+ ATH_LOG_INF = 0x0100,
+ ATH_DEBUG_BMI = 0x0110,
+ ATH_DEBUG_WMI = 0x0120,
+ ATH_DEBUG_HIF = 0x0140,
+ ATH_DEBUG_HTC = 0x0180,
+ ATH_DEBUG_WLAN = 0x1000,
+ ATH_LOG_ERR = 0x1010,
+ ATH_DEBUG_ANY = 0xFFFF,
+};
+
+#ifdef DEBUG
+
+#define A_DPRINTF(f, a) \
+ if(g_dbg_flags & (f)) \
+ { \
+ DBGFN a ; \
+ }
+
+
+// TODO FIX usage of A_PRINTF!
+#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
+#define AR_DEBUG_PRINTBUF(buffer, length, desc) do { \
+ if (debughtc & ATH_DEBUG_DUMP) { \
+ DebugDumpBytes(buffer, length,desc); \
+ } \
+} while(0)
+#define PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(flags, args) do { \
+ if (debughtc & (flags)) { \
+ A_PRINTF(KERN_ALERT PRINTX_ARG args); \
+ } \
+} while (0)
+#define AR_DEBUG_ASSERT(test) do { \
+ if (!(test)) { \
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test)); \
+ } \
+} while(0)
+extern int debughtc;
+#else
+#define AR_DEBUG_PRINTF(flags, args)
+#define AR_DEBUG_PRINTBUF(buffer, length, desc)
+#define AR_DEBUG_ASSERT(test)
+#define AR_DEBUG_LVL_CHECK(lvl) 0
+#define A_DPRINTF(f, a)
+#endif
+
+#endif /* _DEBUG_LINUX_H_ */
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+static A_UINT8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
+extern USER_RSSI_THOLD rssi_map[12];
+extern unsigned int wmitimeout;
+extern A_WAITQUEUE_HEAD arEvent;
+extern int tspecCompliance;
+extern int bypasswmi;
+
+static int
+ar6000_ioctl_get_roam_tbl(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if(wmi_get_roam_tbl_cmd(ar->arWmi) != A_OK) {
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int
+ar6000_ioctl_get_roam_data(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+
+ /* currently assume only roam times are required */
+ if(wmi_get_roam_data_cmd(ar->arWmi, ROAM_DATA_TIME) != A_OK) {
+ return -EIO;
+ }
+
+
+ return 0;
+}
+
+static int
+ar6000_ioctl_set_roam_ctrl(struct net_device *dev, char *userdata)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SET_ROAM_CTRL_CMD cmd;
+ A_UINT8 size = sizeof(cmd);
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+
+ if (copy_from_user(&cmd, userdata, size)) {
+ return -EFAULT;
+ }
+
+ if (cmd.roamCtrlType == WMI_SET_HOST_BIAS) {
+ if (cmd.info.bssBiasInfo.numBss > 1) {
+ size += (cmd.info.bssBiasInfo.numBss - 1) * sizeof(WMI_BSS_BIAS);
+ }
+ }
+
+ if (copy_from_user(&cmd, userdata, size)) {
+ return -EFAULT;
+ }
+
+ if(wmi_set_roam_ctrl_cmd(ar->arWmi, &cmd, size) != A_OK) {
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int
+ar6000_ioctl_set_powersave_timers(struct net_device *dev, char *userdata)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_POWERSAVE_TIMERS_POLICY_CMD cmd;
+ A_UINT8 size = sizeof(cmd);
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, userdata, size)) {
+ return -EFAULT;
+ }
+
+ if (copy_from_user(&cmd, userdata, size)) {
+ return -EFAULT;
+ }
+
+ if(wmi_set_powersave_timers_cmd(ar->arWmi, &cmd, size) != A_OK) {
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int
+ar6000_ioctl_set_wmm(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SET_WMM_CMD cmd;
+ A_STATUS ret;
+
+ if ((dev->flags & IFF_UP) != IFF_UP) {
+ return -EIO;
+ }
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
+ sizeof(cmd)))
+ {
+ return -EFAULT;
+ }
+
+ if (cmd.status == WMI_WMM_ENABLED) {
+ ar->arWmmEnabled = TRUE;
+ } else {
+ ar->arWmmEnabled = FALSE;
+ }
+
+ ret = wmi_set_wmm_cmd(ar->arWmi, cmd.status);
+
+ switch (ret) {
+ case A_OK:
+ return 0;
+ case A_EBUSY :
+ return -EBUSY;
+ case A_NO_MEMORY:
+ return -ENOMEM;
+ case A_EINVAL:
+ default:
+ return -EFAULT;
+ }
+}
+
+static int
+ar6000_ioctl_set_txop(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SET_WMM_TXOP_CMD cmd;
+ A_STATUS ret;
+
+ if ((dev->flags & IFF_UP) != IFF_UP) {
+ return -EIO;
+ }
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1),
+ sizeof(cmd)))
+ {
+ return -EFAULT;
+ }
+
+ ret = wmi_set_wmm_txop(ar->arWmi, cmd.txopEnable);
+
+ switch (ret) {
+ case A_OK:
+ return 0;
+ case A_EBUSY :
+ return -EBUSY;
+ case A_NO_MEMORY:
+ return -ENOMEM;
+ case A_EINVAL:
+ default:
+ return -EFAULT;
+ }
+}
+
+static int
+ar6000_ioctl_get_rd(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ A_STATUS ret = 0;
+
+ if ((dev->flags & IFF_UP) != IFF_UP || ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if(copy_to_user((char *)((unsigned int*)rq->ifr_data + 1),
+ &ar->arRegCode, sizeof(ar->arRegCode)))
+ ret = -EFAULT;
+
+ return ret;
+}
+
+
+/* Get power mode command */
+static int
+ar6000_ioctl_get_power_mode(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_POWER_MODE_CMD power_mode;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ power_mode.powerMode = wmi_get_power_mode_cmd(ar->arWmi);
+ if (copy_to_user(rq->ifr_data, &power_mode, sizeof(WMI_POWER_MODE_CMD))) {
+ ret = -EFAULT;
+ }
+
+ return ret;
+}
+
+
+static int
+ar6000_ioctl_set_channelParams(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_CHANNEL_PARAMS_CMD cmd, *cmdp;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (cmd.numChannels > 1) {
+ cmdp = A_MALLOC(130);
+ if (copy_from_user(cmdp, rq->ifr_data,
+ sizeof (*cmdp) +
+ ((cmd.numChannels - 1) * sizeof(A_UINT16))))
+ {
+ kfree(cmdp);
+ return -EFAULT;
+ }
+ } else {
+ cmdp = &cmd;
+ }
+
+ if ((ar->arPhyCapability == WMI_11G_CAPABILITY) &&
+ ((cmdp->phyMode == WMI_11A_MODE) || (cmdp->phyMode == WMI_11AG_MODE)))
+ {
+ ret = -EINVAL;
+ }
+
+ if (!ret &&
+ (wmi_set_channelParams_cmd(ar->arWmi, cmdp->scanParam, cmdp->phyMode,
+ cmdp->numChannels, cmdp->channelList)
+ != A_OK))
+ {
+ ret = -EIO;
+ }
+
+ if (cmd.numChannels > 1) {
+ kfree(cmdp);
+ }
+
+ return ret;
+}
+
+static int
+ar6000_ioctl_set_snr_threshold(struct net_device *dev, struct ifreq *rq)
+{
+
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SNR_THRESHOLD_PARAMS_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if( wmi_set_snr_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int
+ar6000_ioctl_set_rssi_threshold(struct net_device *dev, struct ifreq *rq)
+{
+#define SWAP_THOLD(thold1, thold2) do { \
+ USER_RSSI_THOLD tmpThold; \
+ tmpThold.tag = thold1.tag; \
+ tmpThold.rssi = thold1.rssi; \
+ thold1.tag = thold2.tag; \
+ thold1.rssi = thold2.rssi; \
+ thold2.tag = tmpThold.tag; \
+ thold2.rssi = tmpThold.rssi; \
+} while (0)
+
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_RSSI_THRESHOLD_PARAMS_CMD cmd;
+ USER_RSSI_PARAMS rssiParams;
+ A_INT32 i, j;
+
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user((char *)&rssiParams, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(USER_RSSI_PARAMS))) {
+ return -EFAULT;
+ }
+ cmd.weight = rssiParams.weight;
+ cmd.pollTime = rssiParams.pollTime;
+
+ A_MEMCPY(rssi_map, &rssiParams.tholds, sizeof(rssi_map));
+ /*
+ * only 6 elements, so use bubble sorting, in ascending order
+ */
+ for (i = 5; i > 0; i--) {
+ for (j = 0; j < i; j++) { /* above tholds */
+ if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
+ SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
+ } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
+ return EFAULT;
+ }
+ }
+ }
+ for (i = 11; i > 6; i--) {
+ for (j = 6; j < i; j++) { /* below tholds */
+ if (rssi_map[j+1].rssi < rssi_map[j].rssi) {
+ SWAP_THOLD(rssi_map[j+1], rssi_map[j]);
+ } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) {
+ return EFAULT;
+ }
+ }
+ }
+
+#ifdef DEBUG
+ for (i = 0; i < 12; i++) {
+ AR_DEBUG2_PRINTF("thold[%d].tag: %d, thold[%d].rssi: %d \n",
+ i, rssi_map[i].tag, i, rssi_map[i].rssi);
+ }
+#endif
+ cmd.thresholdAbove1_Val = rssi_map[0].rssi;
+ cmd.thresholdAbove2_Val = rssi_map[1].rssi;
+ cmd.thresholdAbove3_Val = rssi_map[2].rssi;
+ cmd.thresholdAbove4_Val = rssi_map[3].rssi;
+ cmd.thresholdAbove5_Val = rssi_map[4].rssi;
+ cmd.thresholdAbove6_Val = rssi_map[5].rssi;
+ cmd.thresholdBelow1_Val = rssi_map[6].rssi;
+ cmd.thresholdBelow2_Val = rssi_map[7].rssi;
+ cmd.thresholdBelow3_Val = rssi_map[8].rssi;
+ cmd.thresholdBelow4_Val = rssi_map[9].rssi;
+ cmd.thresholdBelow5_Val = rssi_map[10].rssi;
+ cmd.thresholdBelow6_Val = rssi_map[11].rssi;
+
+ if( wmi_set_rssi_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int
+ar6000_ioctl_set_lq_threshold(struct net_device *dev, struct ifreq *rq)
+{
+
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_LQ_THRESHOLD_PARAMS_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if( wmi_set_lq_threshold_params(ar->arWmi, &cmd) != A_OK ) {
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+
+static int
+ar6000_ioctl_set_probedSsid(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_PROBED_SSID_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (wmi_probedSsid_cmd(ar->arWmi, cmd.entryIndex, cmd.flag, cmd.ssidLength,
+ cmd.ssid) != A_OK)
+ {
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int
+ar6000_ioctl_set_badAp(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_ADD_BAD_AP_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (cmd.badApIndex > WMI_MAX_BAD_AP_INDEX) {
+ return -EIO;
+ }
+
+ if (A_MEMCMP(cmd.bssid, null_mac, AR6000_ETH_ADDR_LEN) == 0) {
+ /*
+ * This is a delete badAP.
+ */
+ if (wmi_deleteBadAp_cmd(ar->arWmi, cmd.badApIndex) != A_OK) {
+ ret = -EIO;
+ }
+ } else {
+ if (wmi_addBadAp_cmd(ar->arWmi, cmd.badApIndex, cmd.bssid) != A_OK) {
+ ret = -EIO;
+ }
+ }
+
+ return ret;
+}
+
+static int
+ar6000_ioctl_create_qos(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_CREATE_PSTREAM_CMD cmd;
+ A_STATUS ret;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ ret = wmi_verify_tspec_params(&cmd, tspecCompliance);
+ if (ret == A_OK)
+ ret = wmi_create_pstream_cmd(ar->arWmi, &cmd);
+
+ switch (ret) {
+ case A_OK:
+ return 0;
+ case A_EBUSY :
+ return -EBUSY;
+ case A_NO_MEMORY:
+ return -ENOMEM;
+ case A_EINVAL:
+ default:
+ return -EFAULT;
+ }
+}
+
+static int
+ar6000_ioctl_delete_qos(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_DELETE_PSTREAM_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ ret = wmi_delete_pstream_cmd(ar->arWmi, cmd.trafficClass, cmd.tsid);
+
+ switch (ret) {
+ case A_OK:
+ return 0;
+ case A_EBUSY :
+ return -EBUSY;
+ case A_NO_MEMORY:
+ return -ENOMEM;
+ case A_EINVAL:
+ default:
+ return -EFAULT;
+ }
+}
+
+static int
+ar6000_ioctl_get_qos_queue(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct ar6000_queuereq qreq;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if( copy_from_user(&qreq, rq->ifr_data,
+ sizeof(struct ar6000_queuereq)))
+ return -EFAULT;
+
+ qreq.activeTsids = wmi_get_mapped_qos_queue(ar->arWmi, qreq.trafficClass);
+
+ if (copy_to_user(rq->ifr_data, &qreq,
+ sizeof(struct ar6000_queuereq)))
+ {
+ ret = -EFAULT;
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+ar6000_ioctl_tcmd_get_rx_report(struct net_device *dev,
+ struct ifreq *rq, A_UINT8 *data, A_UINT32 len)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ A_UINT32 buf[2];
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+ ar->tcmdRxReport = 0;
+ if (wmi_test_cmd(ar->arWmi, data, len) != A_OK) {
+ up(&ar->arSem);
+ return -EIO;
+ }
+
+ wait_event_interruptible_timeout(arEvent, ar->tcmdRxReport != 0, wmitimeout * HZ);
+
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ }
+
+ buf[0] = ar->tcmdRxTotalPkt;
+ buf[1] = ar->tcmdRxRssi;
+ if (!ret && copy_to_user(rq->ifr_data, buf, sizeof(buf))) {
+ ret = -EFAULT;
+ }
+
+ up(&ar->arSem);
+
+ return ret;
+}
+
+void
+ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
+ TCMD_CONT_RX * rx_rep = (TCMD_CONT_RX *)results;
+
+ ar->tcmdRxTotalPkt = rx_rep->u.report.totalPkt;
+ ar->tcmdRxRssi = rx_rep->u.report.rssiInDBm;
+ ar->tcmdRxReport = 1;
+
+ wake_up(&arEvent);
+}
+#endif /* CONFIG_HOST_TCMD_SUPPORT*/
+
+static int
+ar6000_ioctl_set_error_report_bitmask(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_TARGET_ERROR_REPORT_BITMASK cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ ret = wmi_set_error_report_bitmask(ar->arWmi, cmd.bitmask);
+
+ return (ret==0 ? ret : -EINVAL);
+}
+
+static int
+ar6000_clear_target_stats(struct net_device *dev)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ TARGET_STATS *pStats = &ar->arTargetStats;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ A_MEMZERO(pStats, sizeof(TARGET_STATS));
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ return ret;
+}
+
+static int
+ar6000_ioctl_get_target_stats(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ TARGET_STATS_CMD cmd;
+ TARGET_STATS *pStats = &ar->arTargetStats;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+
+ ar->statsUpdatePending = TRUE;
+
+ if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
+ up(&ar->arSem);
+ return -EIO;
+ }
+
+ wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ);
+
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ }
+
+ if (!ret && copy_to_user(rq->ifr_data, pStats, sizeof(*pStats))) {
+ ret = -EFAULT;
+ }
+
+ if (cmd.clearStats == 1) {
+ ret = ar6000_clear_target_stats(dev);
+ }
+
+ up(&ar->arSem);
+
+ return ret;
+}
+
+static int
+ar6000_ioctl_set_access_params(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SET_ACCESS_PARAMS_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (wmi_set_access_params_cmd(ar->arWmi, cmd.txop, cmd.eCWmin, cmd.eCWmax,
+ cmd.aifsn) == A_OK)
+ {
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+
+ return (ret);
+}
+
+static int
+ar6000_ioctl_set_disconnect_timeout(struct net_device *dev, struct ifreq *rq)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_DISC_TIMEOUT_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (wmi_disctimeout_cmd(ar->arWmi, cmd.disconnectTimeout) == A_OK)
+ {
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+
+ return (ret);
+}
+
+static int
+ar6000_xioctl_set_voice_pkt_size(struct net_device *dev, char * userdata)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SET_VOICE_PKT_SIZE_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (wmi_set_voice_pkt_size_cmd(ar->arWmi, cmd.voicePktSize) == A_OK)
+ {
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+
+
+ return (ret);
+}
+
+static int
+ar6000_xioctl_set_max_sp_len(struct net_device *dev, char * userdata)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SET_MAX_SP_LEN_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (wmi_set_max_sp_len_cmd(ar->arWmi, cmd.maxSPLen) == A_OK)
+ {
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+
+ return (ret);
+}
+
+
+static int
+ar6000_xioctl_set_bt_status_cmd(struct net_device *dev, char * userdata)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SET_BT_STATUS_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (wmi_set_bt_status_cmd(ar->arWmi, cmd.streamType, cmd.status) == A_OK)
+ {
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+
+ return (ret);
+}
+
+static int
+ar6000_xioctl_set_bt_params_cmd(struct net_device *dev, char * userdata)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_SET_BT_PARAMS_CMD cmd;
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (copy_from_user(&cmd, userdata, sizeof(cmd))) {
+ return -EFAULT;
+ }
+
+ if (wmi_set_bt_params_cmd(ar->arWmi, &cmd) == A_OK)
+ {
+ ret = 0;
+ } else {
+ ret = -EINVAL;
+ }
+
+ return (ret);
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+struct ar6000_gpio_intr_wait_cmd_s gpio_intr_results;
+/* gpio_reg_results and gpio_data_available are protected by arSem */
+static struct ar6000_gpio_register_cmd_s gpio_reg_results;
+static A_BOOL gpio_data_available; /* Requested GPIO data available */
+static A_BOOL gpio_intr_available; /* GPIO interrupt info available */
+static A_BOOL gpio_ack_received; /* GPIO ack was received */
+
+/* Host-side initialization for General Purpose I/O support */
+void ar6000_gpio_init(void)
+{
+ gpio_intr_available = FALSE;
+ gpio_data_available = FALSE;
+ gpio_ack_received = FALSE;
+}
+
+/*
+ * Called when a GPIO interrupt is received from the Target.
+ * intr_values shows which GPIO pins have interrupted.
+ * input_values shows a recent value of GPIO pins.
+ */
+void
+ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values)
+{
+ gpio_intr_results.intr_mask = intr_mask;
+ gpio_intr_results.input_values = input_values;
+ *((volatile A_BOOL *)&gpio_intr_available) = TRUE;
+ wake_up(&arEvent);
+}
+
+/*
+ * This is called when a response is received from the Target
+ * for a previous or ar6000_gpio_input_get or ar6000_gpio_register_get
+ * call.
+ */
+void
+ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value)
+{
+ gpio_reg_results.gpioreg_id = reg_id;
+ gpio_reg_results.value = value;
+ *((volatile A_BOOL *)&gpio_data_available) = TRUE;
+ wake_up(&arEvent);
+}
+
+/*
+ * This is called when an acknowledgement is received from the Target
+ * for a previous or ar6000_gpio_output_set or ar6000_gpio_register_set
+ * call.
+ */
+void
+ar6000_gpio_ack_rx(void)
+{
+ gpio_ack_received = TRUE;
+ wake_up(&arEvent);
+}
+
+A_STATUS
+ar6000_gpio_output_set(struct net_device *dev,
+ A_UINT32 set_mask,
+ A_UINT32 clear_mask,
+ A_UINT32 enable_mask,
+ A_UINT32 disable_mask)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ gpio_ack_received = FALSE;
+ return wmi_gpio_output_set(ar->arWmi,
+ set_mask, clear_mask, enable_mask, disable_mask);
+}
+
+static A_STATUS
+ar6000_gpio_input_get(struct net_device *dev)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ *((volatile A_BOOL *)&gpio_data_available) = FALSE;
+ return wmi_gpio_input_get(ar->arWmi);
+}
+
+static A_STATUS
+ar6000_gpio_register_set(struct net_device *dev,
+ A_UINT32 gpioreg_id,
+ A_UINT32 value)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ gpio_ack_received = FALSE;
+ return wmi_gpio_register_set(ar->arWmi, gpioreg_id, value);
+}
+
+static A_STATUS
+ar6000_gpio_register_get(struct net_device *dev,
+ A_UINT32 gpioreg_id)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ *((volatile A_BOOL *)&gpio_data_available) = FALSE;
+ return wmi_gpio_register_get(ar->arWmi, gpioreg_id);
+}
+
+static A_STATUS
+ar6000_gpio_intr_ack(struct net_device *dev,
+ A_UINT32 ack_mask)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ gpio_intr_available = FALSE;
+ return wmi_gpio_intr_ack(ar->arWmi, ack_mask);
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ HIF_DEVICE *hifDevice = ar->arHifDevice;
+ int ret, param, param2;
+ unsigned int address = 0;
+ unsigned int length = 0;
+ unsigned char *buffer;
+ char *userdata;
+ A_UINT32 connectCtrlFlags;
+
+
+ static WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
+ WMI_SHORTSCANRATIO_DEFAULT,
+ DEFAULT_SCAN_CTRL_FLAGS,
+ 0};
+ WMI_SET_AKMP_PARAMS_CMD akmpParams;
+ WMI_SET_PMKID_LIST_CMD pmkidInfo;
+
+ if (cmd == AR6000_IOCTL_EXTENDED)
+ {
+ /*
+ * This allows for many more wireless ioctls than would otherwise
+ * be available. Applications embed the actual ioctl command in
+ * the first word of the parameter block, and use the command
+ * AR6000_IOCTL_EXTENDED_CMD on the ioctl call.
+ */
+ get_user(cmd, (int *)rq->ifr_data);
+ userdata = (char *)(((unsigned int *)rq->ifr_data)+1);
+ }
+ else
+ {
+ userdata = (char *)rq->ifr_data;
+ }
+
+ if ((ar->arWlanState == WLAN_DISABLED) &&
+ ((cmd != AR6000_XIOCTRL_WMI_SET_WLAN_STATE) &&
+ (cmd != AR6000_XIOCTL_DIAG_READ) &&
+ (cmd != AR6000_XIOCTL_DIAG_WRITE)))
+ {
+ return -EIO;
+ }
+
+ ret = 0;
+ switch(cmd)
+ {
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+ case AR6000_XIOCTL_TCMD_CONT_TX:
+ {
+ TCMD_CONT_TX txCmd;
+
+ if (ar->tcmdPm == TCMD_PM_SLEEP) {
+ A_PRINTF("Can NOT send tx tcmd when target is asleep! \n");
+ return -EFAULT;
+ }
+
+ if(copy_from_user(&txCmd, userdata, sizeof(TCMD_CONT_TX)))
+ return -EFAULT;
+ wmi_test_cmd(ar->arWmi,(A_UINT8 *)&txCmd, sizeof(TCMD_CONT_TX));
+ }
+ break;
+ case AR6000_XIOCTL_TCMD_CONT_RX:
+ {
+ TCMD_CONT_RX rxCmd;
+
+ if (ar->tcmdPm == TCMD_PM_SLEEP) {
+ A_PRINTF("Can NOT send rx tcmd when target is asleep! \n");
+ return -EFAULT;
+ }
+ if(copy_from_user(&rxCmd, userdata, sizeof(TCMD_CONT_RX)))
+ return -EFAULT;
+ switch(rxCmd.act)
+ {
+ case TCMD_CONT_RX_PROMIS:
+ case TCMD_CONT_RX_FILTER:
+ case TCMD_CONT_RX_SETMAC:
+ wmi_test_cmd(ar->arWmi,(A_UINT8 *)&rxCmd,
+ sizeof(TCMD_CONT_RX));
+ break;
+ case TCMD_CONT_RX_REPORT:
+ ar6000_ioctl_tcmd_get_rx_report(dev, rq,
+ (A_UINT8 *)&rxCmd, sizeof(TCMD_CONT_RX));
+ break;
+ default:
+ A_PRINTF("Unknown Cont Rx mode: %d\n",rxCmd.act);
+ return -EINVAL;
+ }
+ }
+ break;
+ case AR6000_XIOCTL_TCMD_PM:
+ {
+ TCMD_PM pmCmd;
+
+ if(copy_from_user(&pmCmd, userdata, sizeof(TCMD_PM)))
+ return -EFAULT;
+ ar->tcmdPm = pmCmd.mode;
+ wmi_test_cmd(ar->arWmi, (A_UINT8*)&pmCmd, sizeof(TCMD_PM));
+ }
+ break;
+#endif /* CONFIG_HOST_TCMD_SUPPORT */
+
+ case AR6000_XIOCTL_BMI_DONE:
+ ret = BMIDone(hifDevice);
+ break;
+
+ case AR6000_XIOCTL_BMI_READ_MEMORY:
+ get_user(address, (unsigned int *)userdata);
+ get_user(length, (unsigned int *)userdata + 1);
+ AR_DEBUG_PRINTF("Read Memory (address: 0x%x, length: %d)\n",
+ address, length);
+ if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+ A_MEMZERO(buffer, length);
+ ret = BMIReadMemory(hifDevice, address, buffer, length);
+ if (copy_to_user(rq->ifr_data, buffer, length)) {
+ ret = -EFAULT;
+ }
+ A_FREE(buffer);
+ } else {
+ ret = -ENOMEM;
+ }
+ break;
+
+ case AR6000_XIOCTL_BMI_WRITE_MEMORY:
+ get_user(address, (unsigned int *)userdata);
+ get_user(length, (unsigned int *)userdata + 1);
+ AR_DEBUG_PRINTF("Write Memory (address: 0x%x, length: %d)\n",
+ address, length);
+ if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+ A_MEMZERO(buffer, length);
+ if (copy_from_user(buffer, &userdata[sizeof(address) +
+ sizeof(length)], length))
+ {
+ ret = -EFAULT;
+ } else {
+ ret = BMIWriteMemory(hifDevice, address, buffer, length);
+ }
+ A_FREE(buffer);
+ } else {
+ ret = -ENOMEM;
+ }
+ break;
+
+ case AR6000_XIOCTL_BMI_TEST:
+ AR_DEBUG_PRINTF("No longer supported\n");
+ ret = -EOPNOTSUPP;
+ break;
+
+ case AR6000_XIOCTL_BMI_EXECUTE:
+ get_user(address, (unsigned int *)userdata);
+ get_user(param, (unsigned int *)userdata + 1);
+ AR_DEBUG_PRINTF("Execute (address: 0x%x, param: %d)\n",
+ address, param);
+ ret = BMIExecute(hifDevice, address, ¶m);
+ put_user(param, (unsigned int *)rq->ifr_data); /* return value */
+ break;
+
+ case AR6000_XIOCTL_BMI_SET_APP_START:
+ get_user(address, (unsigned int *)userdata);
+ AR_DEBUG_PRINTF("Set App Start (address: 0x%x)\n", address);
+ ret = BMISetAppStart(hifDevice, address);
+ break;
+
+ case AR6000_XIOCTL_BMI_READ_SOC_REGISTER:
+ get_user(address, (unsigned int *)userdata);
+ ret = BMIReadSOCRegister(hifDevice, address, ¶m);
+ put_user(param, (unsigned int *)rq->ifr_data); /* return value */
+ break;
+
+ case AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER:
+ get_user(address, (unsigned int *)userdata);
+ get_user(param, (unsigned int *)userdata + 1);
+ ret = BMIWriteSOCRegister(hifDevice, address, param);
+ break;
+
+#ifdef HTC_RAW_INTERFACE
+ case AR6000_XIOCTL_HTC_RAW_OPEN:
+ ret = A_OK;
+ if (!arRawIfEnabled(ar)) {
+ /* make sure block size is set in case the target was reset since last
+ * BMI phase (i.e. flashup downloads) */
+ ret = ar6000_SetHTCBlockSize(ar);
+ if (A_FAILED(ret)) {
+ break;
+ }
+ /* Terminate the BMI phase */
+ ret = BMIDone(hifDevice);
+ if (ret == A_OK) {
+ ret = ar6000_htc_raw_open(ar);
+ }
+ }
+ break;
+
+ case AR6000_XIOCTL_HTC_RAW_CLOSE:
+ if (arRawIfEnabled(ar)) {
+ ret = ar6000_htc_raw_close(ar);
+ arRawIfEnabled(ar) = FALSE;
+ } else {
+ ret = A_ERROR;
+ }
+ break;
+
+ case AR6000_XIOCTL_HTC_RAW_READ:
+ if (arRawIfEnabled(ar)) {
+ unsigned int streamID;
+ get_user(streamID, (unsigned int *)userdata);
+ get_user(length, (unsigned int *)userdata + 1);
+ buffer = rq->ifr_data + sizeof(length);
+ ret = ar6000_htc_raw_read(ar, (HTC_RAW_STREAM_ID)streamID,
+ buffer, length);
+ put_user(ret, (unsigned int *)rq->ifr_data);
+ } else {
+ ret = A_ERROR;
+ }
+ break;
+
+ case AR6000_XIOCTL_HTC_RAW_WRITE:
+ if (arRawIfEnabled(ar)) {
+ unsigned int streamID;
+ get_user(streamID, (unsigned int *)userdata);
+ get_user(length, (unsigned int *)userdata + 1);
+ buffer = userdata + sizeof(streamID) + sizeof(length);
+ ret = ar6000_htc_raw_write(ar, (HTC_RAW_STREAM_ID)streamID,
+ buffer, length);
+ put_user(ret, (unsigned int *)rq->ifr_data);
+ } else {
+ ret = A_ERROR;
+ }
+ break;
+#endif /* HTC_RAW_INTERFACE */
+
+ case AR6000_IOCTL_WMI_GETREV:
+ {
+ if (copy_to_user(rq->ifr_data, &ar->arVersion,
+ sizeof(ar->arVersion)))
+ {
+ ret = -EFAULT;
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SETPWR:
+ {
+ WMI_POWER_MODE_CMD pwrModeCmd;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&pwrModeCmd, userdata,
+ sizeof(pwrModeCmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_powermode_cmd(ar->arWmi, pwrModeCmd.powerMode)
+ != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS:
+ {
+ WMI_IBSS_PM_CAPS_CMD ibssPmCaps;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&ibssPmCaps, userdata,
+ sizeof(ibssPmCaps)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_ibsspmcaps_cmd(ar->arWmi, ibssPmCaps.power_saving, ibssPmCaps.ttl,
+ ibssPmCaps.atim_windows, ibssPmCaps.timeout_value) != A_OK)
+ {
+ ret = -EIO;
+ }
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ ar->arIbssPsEnable = ibssPmCaps.power_saving;
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_PMPARAMS:
+ {
+ WMI_POWER_PARAMS_CMD pmParams;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&pmParams, userdata,
+ sizeof(pmParams)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_pmparams_cmd(ar->arWmi, pmParams.idle_period,
+ pmParams.pspoll_number,
+ pmParams.dtim_policy) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SETSCAN:
+ {
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&scParams, userdata,
+ sizeof(scParams)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (CAN_SCAN_IN_CONNECT(scParams.scanCtrlFlags)) {
+ ar->arSkipScan = FALSE;
+ } else {
+ ar->arSkipScan = TRUE;
+ }
+
+ if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
+ scParams.fg_end_period,
+ scParams.bg_period,
+ scParams.minact_chdwell_time,
+ scParams.maxact_chdwell_time,
+ scParams.pas_chdwell_time,
+ scParams.shortScanRatio,
+ scParams.scanCtrlFlags,
+ scParams.max_dfsch_act_time) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SETLISTENINT:
+ {
+ WMI_LISTEN_INT_CMD listenCmd;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&listenCmd, userdata,
+ sizeof(listenCmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_listeninterval_cmd(ar->arWmi, listenCmd.listenInterval, listenCmd.numBeacons) != A_OK) {
+ ret = -EIO;
+ } else {
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ ar->arListenInterval = param;
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ }
+
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_BMISS_TIME:
+ {
+ WMI_BMISS_TIME_CMD bmissCmd;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&bmissCmd, userdata,
+ sizeof(bmissCmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_bmisstime_cmd(ar->arWmi, bmissCmd.bmissTime, bmissCmd.numBeacons) != A_OK) {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SETBSSFILTER:
+ {
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else {
+
+ get_user(param, (unsigned char *)userdata);
+ get_user(param2, (unsigned int *)(userdata + 1));
+ printk("SETBSSFILTER: filter 0x%x, mask: 0x%x\n", param, param2);
+ if (wmi_bssfilter_cmd(ar->arWmi, param, param2) != A_OK) {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_SNRTHRESHOLD:
+ {
+ ret = ar6000_ioctl_set_snr_threshold(dev, rq);
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD:
+ {
+ ret = ar6000_ioctl_set_rssi_threshold(dev, rq);
+ break;
+ }
+ case AR6000_XIOCTL_WMI_CLR_RSSISNR:
+ {
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ }
+ ret = wmi_clr_rssi_snr(ar->arWmi);
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_LQTHRESHOLD:
+ {
+ ret = ar6000_ioctl_set_lq_threshold(dev, rq);
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_LPREAMBLE:
+ {
+ WMI_SET_LPREAMBLE_CMD setLpreambleCmd;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&setLpreambleCmd, userdata,
+ sizeof(setLpreambleCmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_lpreamble_cmd(ar->arWmi, setLpreambleCmd.status)
+ != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_RTS:
+ {
+ WMI_SET_RTS_CMD rtsCmd;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&rtsCmd, userdata,
+ sizeof(rtsCmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_rts_cmd(ar->arWmi, rtsCmd.threshold)
+ != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_WMM:
+ {
+ ret = ar6000_ioctl_set_wmm(dev, rq);
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_TXOP:
+ {
+ ret = ar6000_ioctl_set_txop(dev, rq);
+ break;
+ }
+ case AR6000_XIOCTL_WMI_GET_RD:
+ {
+ ret = ar6000_ioctl_get_rd(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_CHANNELPARAMS:
+ {
+ ret = ar6000_ioctl_set_channelParams(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_PROBEDSSID:
+ {
+ ret = ar6000_ioctl_set_probedSsid(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_BADAP:
+ {
+ ret = ar6000_ioctl_set_badAp(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_CREATE_QOS:
+ {
+ ret = ar6000_ioctl_create_qos(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_DELETE_QOS:
+ {
+ ret = ar6000_ioctl_delete_qos(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_GET_QOS_QUEUE:
+ {
+ ret = ar6000_ioctl_get_qos_queue(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_GET_TARGET_STATS:
+ {
+ ret = ar6000_ioctl_get_target_stats(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK:
+ {
+ ret = ar6000_ioctl_set_error_report_bitmask(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_ASSOC_INFO:
+ {
+ WMI_SET_ASSOC_INFO_CMD cmd;
+ A_UINT8 assocInfo[WMI_MAX_ASSOC_INFO_LEN];
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else {
+ get_user(cmd.ieType, userdata);
+ if (cmd.ieType >= WMI_MAX_ASSOC_INFO_TYPE) {
+ ret = -EIO;
+ } else {
+ get_user(cmd.bufferSize, userdata + 1);
+ if (cmd.bufferSize > WMI_MAX_ASSOC_INFO_LEN) {
+ ret = -EFAULT;
+ break;
+ }
+ if (copy_from_user(assocInfo, userdata + 2,
+ cmd.bufferSize))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_associnfo_cmd(ar->arWmi, cmd.ieType,
+ cmd.bufferSize,
+ assocInfo) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ }
+ }
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_ACCESS_PARAMS:
+ {
+ ret = ar6000_ioctl_set_access_params(dev, rq);
+ break;
+ }
+ case AR6000_IOCTL_WMI_SET_DISC_TIMEOUT:
+ {
+ ret = ar6000_ioctl_set_disconnect_timeout(dev, rq);
+ break;
+ }
+ case AR6000_XIOCTL_FORCE_TARGET_RESET:
+ {
+ if (ar->arHtcTarget)
+ {
+// HTCForceReset(htcTarget);
+ }
+ else
+ {
+ AR_DEBUG_PRINTF("ar6000_ioctl cannot attempt reset.\n");
+ }
+ break;
+ }
+ case AR6000_XIOCTL_TARGET_INFO:
+ case AR6000_XIOCTL_CHECK_TARGET_READY: /* backwards compatibility */
+ {
+ /* If we made it to here, then the Target exists and is ready. */
+
+ if (cmd == AR6000_XIOCTL_TARGET_INFO) {
+ if (copy_to_user((A_UINT32 *)rq->ifr_data, &ar->arVersion.target_ver,
+ sizeof(ar->arVersion.target_ver)))
+ {
+ ret = -EFAULT;
+ }
+ if (copy_to_user(((A_UINT32 *)rq->ifr_data)+1, &ar->arTargetType,
+ sizeof(ar->arTargetType)))
+ {
+ ret = -EFAULT;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS:
+ {
+ WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD hbparam;
+
+ if (copy_from_user(&hbparam, userdata, sizeof(hbparam)))
+ {
+ ret = -EFAULT;
+ } else {
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ /* Start a cyclic timer with the parameters provided. */
+ if (hbparam.frequency) {
+ ar->arHBChallengeResp.frequency = hbparam.frequency;
+ }
+ if (hbparam.threshold) {
+ ar->arHBChallengeResp.missThres = hbparam.threshold;
+ }
+
+ /* Delete the pending timer and start a new one */
+ if (timer_pending(&ar->arHBChallengeResp.timer)) {
+ A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
+ }
+ A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP:
+ {
+ A_UINT32 cookie;
+
+ if (copy_from_user(&cookie, userdata, sizeof(cookie))) {
+ return -EFAULT;
+ }
+
+ /* Send the challenge on the control channel */
+ if (wmi_get_challenge_resp_cmd(ar->arWmi, cookie, APP_HB_CHALLENGE) != A_OK) {
+ return -EIO;
+ }
+ break;
+ }
+#ifdef USER_KEYS
+ case AR6000_XIOCTL_USER_SETKEYS:
+ {
+
+ ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_RUN;
+
+ if (copy_from_user(&ar->user_key_ctrl, userdata,
+ sizeof(ar->user_key_ctrl)))
+ {
+ return -EFAULT;
+ }
+
+ A_PRINTF("ar6000 USER set key %x\n", ar->user_key_ctrl);
+ break;
+ }
+#endif /* USER_KEYS */
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+ case AR6000_XIOCTL_GPIO_OUTPUT_SET:
+ {
+ struct ar6000_gpio_output_set_cmd_s gpio_output_set_cmd;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+
+ if (copy_from_user(&gpio_output_set_cmd, userdata,
+ sizeof(gpio_output_set_cmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ ret = ar6000_gpio_output_set(dev,
+ gpio_output_set_cmd.set_mask,
+ gpio_output_set_cmd.clear_mask,
+ gpio_output_set_cmd.enable_mask,
+ gpio_output_set_cmd.disable_mask);
+ if (ret != A_OK) {
+ ret = EIO;
+ }
+ }
+ up(&ar->arSem);
+ break;
+ }
+ case AR6000_XIOCTL_GPIO_INPUT_GET:
+ {
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+
+ ret = ar6000_gpio_input_get(dev);
+ if (ret != A_OK) {
+ up(&ar->arSem);
+ return -EIO;
+ }
+
+ /* Wait for Target to respond. */
+ wait_event_interruptible(arEvent, gpio_data_available);
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ } else {
+ A_ASSERT(gpio_reg_results.gpioreg_id == GPIO_ID_NONE);
+
+ if (copy_to_user(userdata, &gpio_reg_results.value,
+ sizeof(gpio_reg_results.value)))
+ {
+ ret = -EFAULT;
+ }
+ }
+ up(&ar->arSem);
+ break;
+ }
+ case AR6000_XIOCTL_GPIO_REGISTER_SET:
+ {
+ struct ar6000_gpio_register_cmd_s gpio_register_cmd;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+
+ if (copy_from_user(&gpio_register_cmd, userdata,
+ sizeof(gpio_register_cmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ ret = ar6000_gpio_register_set(dev,
+ gpio_register_cmd.gpioreg_id,
+ gpio_register_cmd.value);
+ if (ret != A_OK) {
+ ret = EIO;
+ }
+
+ /* Wait for acknowledgement from Target */
+ wait_event_interruptible(arEvent, gpio_ack_received);
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ }
+ }
+ up(&ar->arSem);
+ break;
+ }
+ case AR6000_XIOCTL_GPIO_REGISTER_GET:
+ {
+ struct ar6000_gpio_register_cmd_s gpio_register_cmd;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+
+ if (copy_from_user(&gpio_register_cmd, userdata,
+ sizeof(gpio_register_cmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ ret = ar6000_gpio_register_get(dev, gpio_register_cmd.gpioreg_id);
+ if (ret != A_OK) {
+ up(&ar->arSem);
+ return -EIO;
+ }
+
+ /* Wait for Target to respond. */
+ wait_event_interruptible(arEvent, gpio_data_available);
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ } else {
+ A_ASSERT(gpio_register_cmd.gpioreg_id == gpio_reg_results.gpioreg_id);
+ if (copy_to_user(userdata, &gpio_reg_results,
+ sizeof(gpio_reg_results)))
+ {
+ ret = -EFAULT;
+ }
+ }
+ }
+ up(&ar->arSem);
+ break;
+ }
+ case AR6000_XIOCTL_GPIO_INTR_ACK:
+ {
+ struct ar6000_gpio_intr_ack_cmd_s gpio_intr_ack_cmd;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+
+ if (copy_from_user(&gpio_intr_ack_cmd, userdata,
+ sizeof(gpio_intr_ack_cmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ ret = ar6000_gpio_intr_ack(dev, gpio_intr_ack_cmd.ack_mask);
+ if (ret != A_OK) {
+ ret = EIO;
+ }
+ }
+ up(&ar->arSem);
+ break;
+ }
+ case AR6000_XIOCTL_GPIO_INTR_WAIT:
+ {
+ /* Wait for Target to report an interrupt. */
+ dev_hold(dev);
+ rtnl_unlock();
+ wait_event_interruptible(arEvent, gpio_intr_available);
+ rtnl_lock();
+ __dev_put(dev);
+
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ } else {
+ if (copy_to_user(userdata, &gpio_intr_results,
+ sizeof(gpio_intr_results)))
+ {
+ ret = -EFAULT;
+ }
+ }
+ break;
+ }
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+ case AR6000_XIOCTL_DBGLOG_CFG_MODULE:
+ {
+ struct ar6000_dbglog_module_config_s config;
+
+ if (copy_from_user(&config, userdata, sizeof(config))) {
+ return -EFAULT;
+ }
+
+ /* Send the challenge on the control channel */
+ if (wmi_config_debug_module_cmd(ar->arWmi, config.mmask,
+ config.tsr, config.rep,
+ config.size, config.valid) != A_OK)
+ {
+ return -EIO;
+ }
+ break;
+ }
+
+ case AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS:
+ {
+ /* Send the challenge on the control channel */
+ if (ar6000_dbglog_get_debug_logs(ar) != A_OK)
+ {
+ return -EIO;
+ }
+ break;
+ }
+
+ case AR6000_XIOCTL_SET_ADHOC_BSSID:
+ {
+ WMI_SET_ADHOC_BSSID_CMD adhocBssid;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&adhocBssid, userdata,
+ sizeof(adhocBssid)))
+ {
+ ret = -EFAULT;
+ } else if (A_MEMCMP(adhocBssid.bssid, bcast_mac,
+ AR6000_ETH_ADDR_LEN) == 0)
+ {
+ ret = -EFAULT;
+ } else {
+
+ A_MEMCPY(ar->arReqBssid, adhocBssid.bssid, sizeof(ar->arReqBssid));
+ }
+ break;
+ }
+
+ case AR6000_XIOCTL_SET_OPT_MODE:
+ {
+ WMI_SET_OPT_MODE_CMD optModeCmd;
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&optModeCmd, userdata,
+ sizeof(optModeCmd)))
+ {
+ ret = -EFAULT;
+ } else if (ar->arConnected && optModeCmd.optMode == SPECIAL_ON) {
+ ret = -EFAULT;
+
+ } else if (wmi_set_opt_mode_cmd(ar->arWmi, optModeCmd.optMode)
+ != A_OK)
+ {
+ ret = -EIO;
+ }
+ break;
+ }
+
+ case AR6000_XIOCTL_OPT_SEND_FRAME:
+ {
+ WMI_OPT_TX_FRAME_CMD optTxFrmCmd;
+ A_UINT8 data[MAX_OPT_DATA_LEN];
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&optTxFrmCmd, userdata,
+ sizeof(optTxFrmCmd)))
+ {
+ ret = -EFAULT;
+ } else if (copy_from_user(data,
+ userdata+sizeof(WMI_OPT_TX_FRAME_CMD)-1,
+ optTxFrmCmd.optIEDataLen))
+ {
+ ret = -EFAULT;
+ } else {
+ ret = wmi_opt_tx_frame_cmd(ar->arWmi,
+ optTxFrmCmd.frmType,
+ optTxFrmCmd.dstAddr,
+ optTxFrmCmd.bssid,
+ optTxFrmCmd.optIEDataLen,
+ data);
+ }
+
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SETRETRYLIMITS:
+ {
+ WMI_SET_RETRY_LIMITS_CMD setRetryParams;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&setRetryParams, userdata,
+ sizeof(setRetryParams)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_retry_limits_cmd(ar->arWmi, setRetryParams.frameType,
+ setRetryParams.trafficClass,
+ setRetryParams.maxRetries,
+ setRetryParams.enableNotify) != A_OK)
+ {
+ ret = -EIO;
+ }
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ ar->arMaxRetries = setRetryParams.maxRetries;
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ }
+ break;
+ }
+
+ case AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL:
+ {
+ WMI_BEACON_INT_CMD bIntvlCmd;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&bIntvlCmd, userdata,
+ sizeof(bIntvlCmd)))
+ {
+ ret = -EFAULT;
+ } else if (wmi_set_adhoc_bconIntvl_cmd(ar->arWmi, bIntvlCmd.beaconInterval)
+ != A_OK)
+ {
+ ret = -EIO;
+ }
+ break;
+ }
+ case IEEE80211_IOCTL_SETAUTHALG:
+ {
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct ieee80211req_authalg req;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&req, userdata,
+ sizeof(struct ieee80211req_authalg)))
+ {
+ ret = -EFAULT;
+ } else if (req.auth_alg == AUTH_ALG_OPEN_SYSTEM) {
+ ar->arDot11AuthMode = OPEN_AUTH;
+ ar->arPairwiseCrypto = NONE_CRYPT;
+ ar->arGroupCrypto = NONE_CRYPT;
+ } else if (req.auth_alg == AUTH_ALG_LEAP) {
+ ar->arDot11AuthMode = LEAP_AUTH;
+ } else {
+ ret = -EIO;
+ }
+ break;
+ }
+
+ case AR6000_XIOCTL_SET_VOICE_PKT_SIZE:
+ ret = ar6000_xioctl_set_voice_pkt_size(dev, userdata);
+ break;
+
+ case AR6000_XIOCTL_SET_MAX_SP:
+ ret = ar6000_xioctl_set_max_sp_len(dev, userdata);
+ break;
+
+ case AR6000_XIOCTL_WMI_GET_ROAM_TBL:
+ ret = ar6000_ioctl_get_roam_tbl(dev, rq);
+ break;
+ case AR6000_XIOCTL_WMI_SET_ROAM_CTRL:
+ ret = ar6000_ioctl_set_roam_ctrl(dev, userdata);
+ break;
+ case AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS:
+ ret = ar6000_ioctl_set_powersave_timers(dev, userdata);
+ break;
+ case AR6000_XIOCTRL_WMI_GET_POWER_MODE:
+ ret = ar6000_ioctl_get_power_mode(dev, rq);
+ break;
+ case AR6000_XIOCTRL_WMI_SET_WLAN_STATE:
+ get_user(ar->arWlanState, (unsigned int *)userdata);
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ break;
+ }
+
+ if (ar->arWlanState == WLAN_ENABLED) {
+ /* Enable foreground scanning */
+ if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period,
+ scParams.fg_end_period,
+ scParams.bg_period,
+ scParams.minact_chdwell_time,
+ scParams.maxact_chdwell_time,
+ scParams.pas_chdwell_time,
+ scParams.shortScanRatio,
+ scParams.scanCtrlFlags,
+ scParams.max_dfsch_act_time) != A_OK)
+ {
+ ret = -EIO;
+ }
+ if (ar->arSsidLen) {
+ ar->arConnectPending = TRUE;
+ if (wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
+ ar->arDot11AuthMode, ar->arAuthMode,
+ ar->arPairwiseCrypto,
+ ar->arPairwiseCryptoLen,
+ ar->arGroupCrypto, ar->arGroupCryptoLen,
+ ar->arSsidLen, ar->arSsid,
+ ar->arReqBssid, ar->arChannelHint,
+ ar->arConnectCtrlFlags) != A_OK)
+ {
+ ret = -EIO;
+ ar->arConnectPending = FALSE;
+ }
+ }
+ } else {
+ /* Disconnect from the AP and disable foreground scanning */
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) {
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ wmi_disconnect_cmd(ar->arWmi);
+ } else {
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ }
+
+ if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0xFF, 0) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ case AR6000_XIOCTL_WMI_GET_ROAM_DATA:
+ ret = ar6000_ioctl_get_roam_data(dev, rq);
+ break;
+ case AR6000_XIOCTL_WMI_SET_BT_STATUS:
+ ret = ar6000_xioctl_set_bt_status_cmd(dev, userdata);
+ break;
+ case AR6000_XIOCTL_WMI_SET_BT_PARAMS:
+ ret = ar6000_xioctl_set_bt_params_cmd(dev, userdata);
+ break;
+ case AR6000_XIOCTL_WMI_STARTSCAN:
+ {
+ WMI_START_SCAN_CMD setStartScanCmd;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&setStartScanCmd, userdata,
+ sizeof(setStartScanCmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_startscan_cmd(ar->arWmi, setStartScanCmd.scanType,
+ setStartScanCmd.forceFgScan,
+ setStartScanCmd.isLegacy,
+ setStartScanCmd.homeDwellTime,
+ setStartScanCmd.forceScanInterval) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SETFIXRATES:
+ {
+ WMI_FIX_RATES_CMD setFixRatesCmd;
+ A_STATUS returnStatus;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&setFixRatesCmd, userdata,
+ sizeof(setFixRatesCmd)))
+ {
+ ret = -EFAULT;
+ } else {
+ returnStatus = wmi_set_fixrates_cmd(ar->arWmi, setFixRatesCmd.fixRateMask);
+ if (returnStatus == A_EINVAL)
+ {
+ ret = -EINVAL;
+ }
+ else if(returnStatus != A_OK) {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+
+ case AR6000_XIOCTL_WMI_GETFIXRATES:
+ {
+ WMI_FIX_RATES_CMD getFixRatesCmd;
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+ /* Used copy_from_user/copy_to_user to access user space data */
+ if (copy_from_user(&getFixRatesCmd, userdata, sizeof(getFixRatesCmd))) {
+ ret = -EFAULT;
+ } else {
+ ar->arRateMask = 0xFFFF;
+
+ if (wmi_get_ratemask_cmd(ar->arWmi) != A_OK) {
+ up(&ar->arSem);
+ return -EIO;
+ }
+
+ wait_event_interruptible_timeout(arEvent, ar->arRateMask != 0xFFFF, wmitimeout * HZ);
+
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ }
+
+ if (!ret) {
+ getFixRatesCmd.fixRateMask = ar->arRateMask;
+ }
+
+ if(copy_to_user(userdata, &getFixRatesCmd, sizeof(getFixRatesCmd))) {
+ ret = -EFAULT;
+ }
+
+ up(&ar->arSem);
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_AUTHMODE:
+ {
+ WMI_SET_AUTH_MODE_CMD setAuthMode;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&setAuthMode, userdata,
+ sizeof(setAuthMode)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_authmode_cmd(ar->arWmi, setAuthMode.mode) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_REASSOCMODE:
+ {
+ WMI_SET_REASSOC_MODE_CMD setReassocMode;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&setReassocMode, userdata,
+ sizeof(setReassocMode)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_reassocmode_cmd(ar->arWmi, setReassocMode.mode) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_DIAG_READ:
+ {
+ A_UINT32 addr, data;
+ get_user(addr, (unsigned int *)userdata);
+ if (ar6000_ReadRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
+ ret = -EIO;
+ }
+ put_user(data, (unsigned int *)userdata + 1);
+ break;
+ }
+ case AR6000_XIOCTL_DIAG_WRITE:
+ {
+ A_UINT32 addr, data;
+ get_user(addr, (unsigned int *)userdata);
+ get_user(data, (unsigned int *)userdata + 1);
+ if (ar6000_WriteRegDiag(ar->arHifDevice, &addr, &data) != A_OK) {
+ ret = -EIO;
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_KEEPALIVE:
+ {
+ WMI_SET_KEEPALIVE_CMD setKeepAlive;
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ } else if (copy_from_user(&setKeepAlive, userdata,
+ sizeof(setKeepAlive))){
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_keepalive_cmd(ar->arWmi, setKeepAlive.keepaliveInterval) != A_OK) {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_GET_KEEPALIVE:
+ {
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_GET_KEEPALIVE_CMD getKeepAlive;
+ int ret = 0;
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+ if (copy_from_user(&getKeepAlive, userdata,sizeof(getKeepAlive))) {
+ ret = -EFAULT;
+ } else {
+ getKeepAlive.keepaliveInterval = wmi_get_keepalive_cmd(ar->arWmi);
+ ar->arKeepaliveConfigured = 0xFF;
+ if (wmi_get_keepalive_configured(ar->arWmi) != A_OK){
+ up(&ar->arSem);
+ return -EIO;
+ }
+ wait_event_interruptible_timeout(arEvent, ar->arKeepaliveConfigured != 0xFF, wmitimeout * HZ);
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ }
+
+ if (!ret) {
+ getKeepAlive.configured = ar->arKeepaliveConfigured;
+ }
+ if (copy_to_user(userdata, &getKeepAlive, sizeof(getKeepAlive))) {
+ ret = -EFAULT;
+ }
+ up(&ar->arSem);
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_APPIE:
+ {
+ WMI_SET_APPIE_CMD appIEcmd;
+ A_UINT8 appIeInfo[IEEE80211_APPIE_FRAME_MAX_LEN];
+ A_UINT32 fType,ieLen;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ get_user(fType, (A_UINT32 *)userdata);
+ appIEcmd.mgmtFrmType = fType;
+ if (appIEcmd.mgmtFrmType >= IEEE80211_APPIE_NUM_OF_FRAME) {
+ ret = -EIO;
+ } else {
+ get_user(ieLen, (A_UINT32 *)(userdata + 4));
+ appIEcmd.ieLen = ieLen;
+ if (appIEcmd.ieLen > IEEE80211_APPIE_FRAME_MAX_LEN) {
+ ret = -EIO;
+ break;
+ }
+ if (copy_from_user(appIeInfo, userdata + 8, appIEcmd.ieLen)) {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_appie_cmd(ar->arWmi, appIEcmd.mgmtFrmType,
+ appIEcmd.ieLen, appIeInfo) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER:
+ {
+ WMI_BSS_FILTER_CMD cmd;
+ A_UINT32 filterType;
+
+ if (copy_from_user(&filterType, userdata, sizeof(A_UINT32)))
+ {
+ return -EFAULT;
+ }
+ if (filterType & (IEEE80211_FILTER_TYPE_BEACON |
+ IEEE80211_FILTER_TYPE_PROBE_RESP))
+ {
+ cmd.bssFilter = ALL_BSS_FILTER;
+ } else {
+ cmd.bssFilter = NONE_BSS_FILTER;
+ }
+ if (wmi_bssfilter_cmd(ar->arWmi, cmd.bssFilter, 0) != A_OK) {
+ ret = -EIO;
+ }
+
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ ar->arMgmtFilter = filterType;
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_WSC_STATUS:
+ {
+ A_UINT32 wsc_status;
+
+ if (copy_from_user(&wsc_status, userdata, sizeof(A_UINT32)))
+ {
+ return -EFAULT;
+ }
+ if (wmi_set_wsc_status_cmd(ar->arWmi, wsc_status) != A_OK) {
+ ret = -EIO;
+ }
+ break;
+ }
+ case AR6000_XIOCTL_BMI_ROMPATCH_INSTALL:
+ {
+ A_UINT32 ROM_addr;
+ A_UINT32 RAM_addr;
+ A_UINT32 nbytes;
+ A_UINT32 do_activate;
+ A_UINT32 rompatch_id;
+
+ get_user(ROM_addr, (A_UINT32 *)userdata);
+ get_user(RAM_addr, (A_UINT32 *)userdata + 1);
+ get_user(nbytes, (A_UINT32 *)userdata + 2);
+ get_user(do_activate, (A_UINT32 *)userdata + 3);
+ AR_DEBUG_PRINTF("Install rompatch from ROM: 0x%x to RAM: 0x%x length: %d\n",
+ ROM_addr, RAM_addr, nbytes);
+ ret = BMIrompatchInstall(hifDevice, ROM_addr, RAM_addr,
+ nbytes, do_activate, &rompatch_id);
+ if (ret == A_OK) {
+ put_user(rompatch_id, (unsigned int *)rq->ifr_data); /* return value */
+ }
+ break;
+ }
+
+ case AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL:
+ {
+ A_UINT32 rompatch_id;
+
+ get_user(rompatch_id, (A_UINT32 *)userdata);
+ AR_DEBUG_PRINTF("UNinstall rompatch_id %d\n", rompatch_id);
+ ret = BMIrompatchUninstall(hifDevice, rompatch_id);
+ break;
+ }
+
+ case AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE:
+ case AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE:
+ {
+ A_UINT32 rompatch_count;
+
+ get_user(rompatch_count, (A_UINT32 *)userdata);
+ AR_DEBUG_PRINTF("Change rompatch activation count=%d\n", rompatch_count);
+ length = sizeof(A_UINT32) * rompatch_count;
+ if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) {
+ A_MEMZERO(buffer, length);
+ if (copy_from_user(buffer, &userdata[sizeof(rompatch_count)], length))
+ {
+ ret = -EFAULT;
+ } else {
+ if (cmd == AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) {
+ ret = BMIrompatchActivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
+ } else {
+ ret = BMIrompatchDeactivate(hifDevice, rompatch_count, (A_UINT32 *)buffer);
+ }
+ }
+ A_FREE(buffer);
+ } else {
+ ret = -ENOMEM;
+ }
+
+ break;
+ }
+
+ case AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE:
+ {
+ WMI_SET_HOST_SLEEP_MODE_CMD setHostSleepMode;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&setHostSleepMode, userdata,
+ sizeof(setHostSleepMode)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_host_sleep_mode_cmd(ar->arWmi,
+ &setHostSleepMode) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_SET_WOW_MODE:
+ {
+ WMI_SET_WOW_MODE_CMD setWowMode;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&setWowMode, userdata,
+ sizeof(setWowMode)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_wow_mode_cmd(ar->arWmi,
+ &setWowMode) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_GET_WOW_LIST:
+ {
+ WMI_GET_WOW_LIST_CMD getWowList;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&getWowList, userdata,
+ sizeof(getWowList)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_get_wow_list_cmd(ar->arWmi,
+ &getWowList) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_WMI_ADD_WOW_PATTERN:
+ {
+#define WOW_PATTERN_SIZE 64
+#define WOW_MASK_SIZE 64
+
+ WMI_ADD_WOW_PATTERN_CMD cmd;
+ A_UINT8 mask_data[WOW_PATTERN_SIZE]={0};
+ A_UINT8 pattern_data[WOW_PATTERN_SIZE]={0};
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else {
+
+ if(copy_from_user(&cmd, userdata,
+ sizeof(WMI_ADD_WOW_PATTERN_CMD)))
+ return -EFAULT;
+ if (copy_from_user(pattern_data,
+ userdata + 3,
+ cmd.filter_size)){
+ ret = -EFAULT;
+ break;
+ }
+ if (copy_from_user(mask_data,
+ (userdata + 3 + cmd.filter_size),
+ cmd.filter_size)){
+ ret = -EFAULT;
+ break;
+ } else {
+ if (wmi_add_wow_pattern_cmd(ar->arWmi,
+ &cmd, pattern_data, mask_data, cmd.filter_size) != A_OK){
+ ret = -EIO;
+ }
+ }
+ }
+#undef WOW_PATTERN_SIZE
+#undef WOW_MASK_SIZE
+ break;
+ }
+ case AR6000_XIOCTL_WMI_DEL_WOW_PATTERN:
+ {
+ WMI_DEL_WOW_PATTERN_CMD delWowPattern;
+
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&delWowPattern, userdata,
+ sizeof(delWowPattern)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_del_wow_pattern_cmd(ar->arWmi,
+ &delWowPattern) != A_OK)
+ {
+ ret = -EIO;
+ }
+ }
+ break;
+ }
+ case AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE:
+ if (ar->arHtcTarget != NULL) {
+ HTCDumpCreditStates(ar->arHtcTarget);
+ }
+ break;
+ case AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE:
+ if (ar->arHtcTarget != NULL) {
+ struct ar6000_traffic_activity_change data;
+
+ if (copy_from_user(&data, userdata, sizeof(data)))
+ {
+ return -EFAULT;
+ }
+ /* note, this is used for testing (mbox ping testing), indicate activity
+ * change using the stream ID as the traffic class */
+ ar6000_indicate_tx_activity(ar,
+ (A_UINT8)data.StreamID,
+ data.Active ? TRUE : FALSE);
+ }
+ break;
+ case AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS:
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&connectCtrlFlags, userdata,
+ sizeof(connectCtrlFlags)))
+ {
+ ret = -EFAULT;
+ } else {
+ ar->arConnectCtrlFlags = connectCtrlFlags;
+ }
+ break;
+ case AR6000_XIOCTL_WMI_SET_AKMP_PARAMS:
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else if (copy_from_user(&akmpParams, userdata,
+ sizeof(WMI_SET_AKMP_PARAMS_CMD)))
+ {
+ ret = -EFAULT;
+ } else {
+ if (wmi_set_akmp_params_cmd(ar->arWmi, &akmpParams) != A_OK) {
+ ret = -EIO;
+ }
+ }
+ break;
+ case AR6000_XIOCTL_WMI_SET_PMKID_LIST:
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else {
+ if (copy_from_user(&pmkidInfo.numPMKID, userdata,
+ sizeof(pmkidInfo.numPMKID)))
+ {
+ ret = -EFAULT;
+ break;
+ }
+ if (copy_from_user(&pmkidInfo.pmkidList,
+ userdata + sizeof(pmkidInfo.numPMKID),
+ pmkidInfo.numPMKID * sizeof(WMI_PMKID)))
+ {
+ ret = -EFAULT;
+ break;
+ }
+ if (wmi_set_pmkid_list_cmd(ar->arWmi, &pmkidInfo) != A_OK) {
+ ret = -EIO;
+ }
+ }
+ break;
+ case AR6000_XIOCTL_WMI_GET_PMKID_LIST:
+ if (ar->arWmiReady == FALSE) {
+ ret = -EIO;
+ } else {
+ if (wmi_get_pmkid_list_cmd(ar->arWmi) != A_OK) {
+ ret = -EIO;
+ }
+ }
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ return ret;
+}
+
--- /dev/null
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <a_config.h>
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "htc_packet.h"
+
+#define AR6000_DATA_OFFSET 64
+
+void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt)
+{
+ skb_queue_tail((struct sk_buff_head *) q, (struct sk_buff *) pkt);
+}
+
+void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt)
+{
+ skb_queue_head((struct sk_buff_head *) q, (struct sk_buff *) pkt);
+}
+
+void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q)
+{
+ return((void *) skb_dequeue((struct sk_buff_head *) q));
+}
+
+int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q)
+{
+ return(skb_queue_len((struct sk_buff_head *) q));
+}
+
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q)
+{
+ return(skb_queue_empty((struct sk_buff_head *) q));
+}
+
+void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q)
+{
+ skb_queue_head_init((struct sk_buff_head *) q);
+}
+
+void *
+a_netbuf_alloc(int size)
+{
+ struct sk_buff *skb;
+ skb = dev_alloc_skb(AR6000_DATA_OFFSET + sizeof(HTC_PACKET) + size);
+ skb_reserve(skb, AR6000_DATA_OFFSET + sizeof(HTC_PACKET));
+ return ((void *)skb);
+}
+
+/*
+ * Allocate an SKB w.o. any encapsulation requirement.
+ */
+void *
+a_netbuf_alloc_raw(int size)
+{
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(size);
+
+ return ((void *)skb);
+}
+
+void
+a_netbuf_free(void *bufPtr)
+{
+ struct sk_buff *skb = (struct sk_buff *)bufPtr;
+
+ dev_kfree_skb(skb);
+}
+
+A_UINT32
+a_netbuf_to_len(void *bufPtr)
+{
+ return (((struct sk_buff *)bufPtr)->len);
+}
+
+void *
+a_netbuf_to_data(void *bufPtr)
+{
+ return (((struct sk_buff *)bufPtr)->data);
+}
+
+/*
+ * Add len # of bytes to the beginning of the network buffer
+ * pointed to by bufPtr
+ */
+A_STATUS
+a_netbuf_push(void *bufPtr, A_INT32 len)
+{
+ skb_push((struct sk_buff *)bufPtr, len);
+
+ return A_OK;
+}
+
+/*
+ * Add len # of bytes to the beginning of the network buffer
+ * pointed to by bufPtr and also fill with data
+ */
+A_STATUS
+a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len)
+{
+ skb_push((struct sk_buff *) bufPtr, len);
+ A_MEMCPY(((struct sk_buff *)bufPtr)->data, srcPtr, len);
+
+ return A_OK;
+}
+
+/*
+ * Add len # of bytes to the end of the network buffer
+ * pointed to by bufPtr
+ */
+A_STATUS
+a_netbuf_put(void *bufPtr, A_INT32 len)
+{
+ skb_put((struct sk_buff *)bufPtr, len);
+
+ return A_OK;
+}
+
+/*
+ * Add len # of bytes to the end of the network buffer
+ * pointed to by bufPtr and also fill with data
+ */
+A_STATUS
+a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len)
+{
+ char *start = ((struct sk_buff *)bufPtr)->data +
+ ((struct sk_buff *)bufPtr)->len;
+ skb_put((struct sk_buff *)bufPtr, len);
+ A_MEMCPY(start, srcPtr, len);
+
+ return A_OK;
+}
+
+
+/*
+ * Trim the network buffer pointed to by bufPtr to len # of bytes
+ */
+A_STATUS
+a_netbuf_setlen(void *bufPtr, A_INT32 len)
+{
+ skb_trim((struct sk_buff *)bufPtr, len);
+
+ return A_OK;
+}
+
+/*
+ * Chop of len # of bytes from the end of the buffer.
+ */
+A_STATUS
+a_netbuf_trim(void *bufPtr, A_INT32 len)
+{
+ skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
+
+ return A_OK;
+}
+
+/*
+ * Chop of len # of bytes from the end of the buffer and return the data.
+ */
+A_STATUS
+a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len)
+{
+ char *start = ((struct sk_buff *)bufPtr)->data +
+ (((struct sk_buff *)bufPtr)->len - len);
+
+ A_MEMCPY(dstPtr, start, len);
+ skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len);
+
+ return A_OK;
+}
+
+
+/*
+ * Returns the number of bytes available to a a_netbuf_push()
+ */
+A_INT32
+a_netbuf_headroom(void *bufPtr)
+{
+ return (skb_headroom((struct sk_buff *)bufPtr));
+}
+
+/*
+ * Removes specified number of bytes from the beginning of the buffer
+ */
+A_STATUS
+a_netbuf_pull(void *bufPtr, A_INT32 len)
+{
+ skb_pull((struct sk_buff *)bufPtr, len);
+
+ return A_OK;
+}
+
+/*
+ * Removes specified number of bytes from the beginning of the buffer
+ * and return the data
+ */
+A_STATUS
+a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len)
+{
+ A_MEMCPY(dstPtr, ((struct sk_buff *)bufPtr)->data, len);
+ skb_pull((struct sk_buff *)bufPtr, len);
+
+ return A_OK;
+}
+
--- /dev/null
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/osapi_linux.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _OSAPI_LINUX_H_
+#define _OSAPI_LINUX_H_
+
+#ifdef __KERNEL__
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <linux/jiffies.h>
+#endif
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#ifdef KERNEL_2_4
+#include <asm/arch/irq.h>
+#include <asm/irq.h>
+#endif
+
+#ifdef __GNUC__
+#define __ATTRIB_PACK __attribute__ ((packed))
+#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2)))
+#define __ATTRIB_NORETURN __attribute__ ((noreturn))
+#ifndef INLINE
+#define INLINE __inline__
+#endif
+#else /* Not GCC */
+#define __ATTRIB_PACK
+#define __ATTRIB_PRINTF
+#define __ATTRIB_NORETURN
+#ifndef INLINE
+#define INLINE __inline
+#endif
+#endif /* End __GNUC__ */
+
+#define PREPACK
+#define POSTPACK __ATTRIB_PACK
+
+/*
+ * Endianes macros
+ */
+#define A_BE2CPU8(x) ntohb(x)
+#define A_BE2CPU16(x) ntohs(x)
+#define A_BE2CPU32(x) ntohl(x)
+
+#define A_LE2CPU8(x) (x)
+#define A_LE2CPU16(x) (x)
+#define A_LE2CPU32(x) (x)
+
+#define A_CPU2BE8(x) htonb(x)
+#define A_CPU2BE16(x) htons(x)
+#define A_CPU2BE32(x) htonl(x)
+
+#define A_MEMCPY(dst, src, len) memcpy((A_UINT8 *)(dst), (src), (len))
+#define A_MEMZERO(addr, len) memset(addr, 0, len)
+#define A_MEMCMP(addr1, addr2, len) memcmp((addr1), (addr2), (len))
+#define A_MALLOC(size) kmalloc((size), GFP_KERNEL)
+#define A_MALLOC_NOWAIT(size) kmalloc((size), GFP_ATOMIC)
+#define A_FREE(addr) kfree(addr)
+#define A_PRINTF(args...) printk(args)
+
+/* Mutual Exclusion */
+typedef spinlock_t A_MUTEX_T;
+#define A_MUTEX_INIT(mutex) spin_lock_init(mutex)
+#define A_MUTEX_LOCK(mutex) spin_lock_bh(mutex)
+#define A_MUTEX_UNLOCK(mutex) spin_unlock_bh(mutex)
+#define A_IS_MUTEX_VALID(mutex) TRUE /* okay to return true, since A_MUTEX_DELETE does nothing */
+#define A_MUTEX_DELETE(mutex) /* spin locks are not kernel resources so nothing to free.. */
+
+/* Get current time in ms adding a constant offset (in ms) */
+#define A_GET_MS(offset) \
+ (jiffies + ((offset) / 1000) * HZ)
+
+/*
+ * Timer Functions
+ */
+#define A_MDELAY(msecs) mdelay(msecs)
+typedef struct timer_list A_TIMER;
+
+#define A_INIT_TIMER(pTimer, pFunction, pArg) do { \
+ init_timer(pTimer); \
+ (pTimer)->function = (pFunction); \
+ (pTimer)->data = (unsigned long)(pArg); \
+} while (0)
+
+/*
+ * Start a Timer that elapses after 'periodMSec' milli-seconds
+ * Support is provided for a one-shot timer. The 'repeatFlag' is
+ * ignored.
+ */
+#define A_TIMEOUT_MS(pTimer, periodMSec, repeatFlag) do { \
+ if (repeatFlag) { \
+ printk("\n" __FILE__ ":%d: Timer Repeat requested\n",__LINE__); \
+ panic("Timer Repeat"); \
+ } \
+ mod_timer((pTimer), jiffies + HZ * (periodMSec) / 1000); \
+} while (0)
+
+/*
+ * Cancel the Timer.
+ */
+#define A_UNTIMEOUT(pTimer) do { \
+ del_timer((pTimer)); \
+} while (0)
+
+#define A_DELETE_TIMER(pTimer) do { \
+} while (0)
+
+/*
+ * Wait Queue related functions
+ */
+typedef wait_queue_head_t A_WAITQUEUE_HEAD;
+#define A_INIT_WAITQUEUE_HEAD(head) init_waitqueue_head(head)
+#ifndef wait_event_interruptible_timeout
+#define __wait_event_interruptible_timeout(wq, condition, ret) \
+do { \
+ wait_queue_t __wait; \
+ init_waitqueue_entry(&__wait, current); \
+ \
+ add_wait_queue(&wq, &__wait); \
+ for (;;) { \
+ set_current_state(TASK_INTERRUPTIBLE); \
+ if (condition) \
+ break; \
+ if (!signal_pending(current)) { \
+ ret = schedule_timeout(ret); \
+ if (!ret) \
+ break; \
+ continue; \
+ } \
+ ret = -ERESTARTSYS; \
+ break; \
+ } \
+ current->state = TASK_RUNNING; \
+ remove_wait_queue(&wq, &__wait); \
+} while (0)
+
+#define wait_event_interruptible_timeout(wq, condition, timeout) \
+({ \
+ long __ret = timeout; \
+ if (!(condition)) \
+ __wait_event_interruptible_timeout(wq, condition, __ret); \
+ __ret; \
+})
+#endif /* wait_event_interruptible_timeout */
+
+#define A_WAIT_EVENT_INTERRUPTIBLE_TIMEOUT(head, condition, timeout) do { \
+ wait_event_interruptible_timeout(head, condition, timeout); \
+} while (0)
+
+#define A_WAKE_UP(head) wake_up(head)
+
+#ifdef DEBUG
+#define A_ASSERT(expr) \
+ if (!(expr)) { \
+ printk(KERN_ALERT "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
+ panic(#expr); \
+ }
+
+#else
+#define A_ASSERT(expr)
+#endif /* DEBUG */
+
+/*
+ * Initialization of the network buffer subsystem
+ */
+#define A_NETBUF_INIT()
+
+/*
+ * Network buffer queue support
+ */
+typedef struct sk_buff_head A_NETBUF_QUEUE_T;
+
+#define A_NETBUF_QUEUE_INIT(q) \
+ a_netbuf_queue_init(q)
+
+#define A_NETBUF_ENQUEUE(q, pkt) \
+ a_netbuf_enqueue((q), (pkt))
+#define A_NETBUF_PREQUEUE(q, pkt) \
+ a_netbuf_prequeue((q), (pkt))
+#define A_NETBUF_DEQUEUE(q) \
+ (a_netbuf_dequeue(q))
+#define A_NETBUF_QUEUE_SIZE(q) \
+ a_netbuf_queue_size(q)
+#define A_NETBUF_QUEUE_EMPTY(q) \
+ a_netbuf_queue_empty(q)
+
+/*
+ * Network buffer support
+ */
+#define A_NETBUF_ALLOC(size) \
+ a_netbuf_alloc(size)
+#define A_NETBUF_ALLOC_RAW(size) \
+ a_netbuf_alloc_raw(size)
+#define A_NETBUF_FREE(bufPtr) \
+ a_netbuf_free(bufPtr)
+#define A_NETBUF_DATA(bufPtr) \
+ a_netbuf_to_data(bufPtr)
+#define A_NETBUF_LEN(bufPtr) \
+ a_netbuf_to_len(bufPtr)
+#define A_NETBUF_PUSH(bufPtr, len) \
+ a_netbuf_push(bufPtr, len)
+#define A_NETBUF_PUT(bufPtr, len) \
+ a_netbuf_put(bufPtr, len)
+#define A_NETBUF_TRIM(bufPtr,len) \
+ a_netbuf_trim(bufPtr, len)
+#define A_NETBUF_PULL(bufPtr, len) \
+ a_netbuf_pull(bufPtr, len)
+#define A_NETBUF_HEADROOM(bufPtr)\
+ a_netbuf_headroom(bufPtr)
+#define A_NETBUF_SETLEN(bufPtr,len) \
+ a_netbuf_setlen(bufPtr, len)
+
+/* Add data to end of a buffer */
+#define A_NETBUF_PUT_DATA(bufPtr, srcPtr, len) \
+ a_netbuf_put_data(bufPtr, srcPtr, len)
+
+/* Add data to start of the buffer */
+#define A_NETBUF_PUSH_DATA(bufPtr, srcPtr, len) \
+ a_netbuf_push_data(bufPtr, srcPtr, len)
+
+/* Remove data at start of the buffer */
+#define A_NETBUF_PULL_DATA(bufPtr, dstPtr, len) \
+ a_netbuf_pull_data(bufPtr, dstPtr, len)
+
+/* Remove data from the end of the buffer */
+#define A_NETBUF_TRIM_DATA(bufPtr, dstPtr, len) \
+ a_netbuf_trim_data(bufPtr, dstPtr, len)
+
+/* View data as "size" contiguous bytes of type "t" */
+#define A_NETBUF_VIEW_DATA(bufPtr, t, size) \
+ (t )( ((struct skbuf *)(bufPtr))->data)
+
+/* return the beginning of the headroom for the buffer */
+#define A_NETBUF_HEAD(bufPtr) \
+ ((((struct sk_buff *)(bufPtr))->head))
+
+/*
+ * OS specific network buffer access routines
+ */
+void *a_netbuf_alloc(int size);
+void *a_netbuf_alloc_raw(int size);
+void a_netbuf_free(void *bufPtr);
+void *a_netbuf_to_data(void *bufPtr);
+A_UINT32 a_netbuf_to_len(void *bufPtr);
+A_STATUS a_netbuf_push(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len);
+A_STATUS a_netbuf_put(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len);
+A_STATUS a_netbuf_pull(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len);
+A_STATUS a_netbuf_trim(void *bufPtr, A_INT32 len);
+A_STATUS a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len);
+A_STATUS a_netbuf_setlen(void *bufPtr, A_INT32 len);
+A_INT32 a_netbuf_headroom(void *bufPtr);
+void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt);
+void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt);
+void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
+int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q);
+void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q);
+
+/*
+ * Kernel v.s User space functions
+ */
+A_UINT32 a_copy_to_user(void *to, const void *from, A_UINT32 n);
+A_UINT32 a_copy_from_user(void *to, const void *from, A_UINT32 n);
+
+#else /* __KERNEL__ */
+
+#ifdef __GNUC__
+#define __ATTRIB_PACK __attribute__ ((packed))
+#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2)))
+#define __ATTRIB_NORETURN __attribute__ ((noreturn))
+#ifndef INLINE
+#define INLINE __inline__
+#endif
+#else /* Not GCC */
+#define __ATTRIB_PACK
+#define __ATTRIB_PRINTF
+#define __ATTRIB_NORETURN
+#ifndef INLINE
+#define INLINE __inline
+#endif
+#endif /* End __GNUC__ */
+
+#define PREPACK
+#define POSTPACK __ATTRIB_PACK
+
+#endif /* __KERNEL__ */
+
+#endif /* _OSAPI_LINUX_H_ */
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "ar6000_drv.h"
+
+static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+static void ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi);
+extern unsigned int wmitimeout;
+extern A_WAITQUEUE_HEAD arEvent;
+extern wait_queue_head_t ar6000_scan_queue;
+
+/*
+ * Encode a WPA or RSN information element as a custom
+ * element using the hostap format.
+ */
+static u_int
+encode_ie(void *buf, size_t bufsize,
+ const u_int8_t *ie, size_t ielen,
+ const char *leader, size_t leader_len)
+{
+ u_int8_t *p;
+ int i;
+
+ if (bufsize < leader_len)
+ return 0;
+ p = buf;
+ memcpy(p, leader, leader_len);
+ bufsize -= leader_len;
+ p += leader_len;
+ for (i = 0; i < ielen && bufsize > 2; i++)
+ p += sprintf(p, "%02x", ie[i]);
+ return (i == ielen ? p - (u_int8_t *)buf : 0);
+}
+
+void
+ar6000_scan_node(void *arg, bss_t *ni)
+{
+ struct iw_event iwe;
+#if WIRELESS_EXT > 14
+ char buf[64*2 + 30];
+#endif
+ struct ar_giwscan_param *param;
+ A_CHAR *current_ev;
+ A_CHAR *end_buf;
+ struct ieee80211_common_ie *cie;
+ struct iw_request_info info;
+
+ info.cmd = 0;
+ info.flags = 0;
+
+ param = (struct ar_giwscan_param *)arg;
+
+ if (param->current_ev >= param->end_buf) {
+ return;
+ }
+ if ((param->firstPass == TRUE) &&
+ ((ni->ni_cie.ie_wpa == NULL) && (ni->ni_cie.ie_rsn == NULL))) {
+ /*
+ * Only forward wpa bss's in first pass
+ */
+ return;
+ }
+
+ if ((param->firstPass == FALSE) &&
+ ((ni->ni_cie.ie_wpa != NULL) || (ni->ni_cie.ie_rsn != NULL))) {
+ /*
+ * Only forward non-wpa bss's in 2nd pass
+ */
+ return;
+ }
+
+ current_ev = param->current_ev;
+ end_buf = param->end_buf;
+
+ cie = &ni->ni_cie;
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ A_MEMCPY(iwe.u.ap_addr.sa_data, ni->ni_macaddr, 6);
+ current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+ IW_EV_ADDR_LEN);
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ iwe.u.data.length = cie->ie_ssid[1];
+ current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+ &cie->ie_ssid[2]);
+
+ if (cie->ie_capInfo & (IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) {
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = SIOCGIWMODE;
+ iwe.u.mode = cie->ie_capInfo & IEEE80211_CAPINFO_ESS ?
+ IW_MODE_MASTER : IW_MODE_ADHOC;
+ current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+ IW_EV_UINT_LEN);
+ }
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = cie->ie_chan * 100000;
+ iwe.u.freq.e = 1;
+ current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+ IW_EV_FREQ_LEN);
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = IWEVQUAL;
+ ar6000_set_quality(&iwe.u.qual, ni->ni_snr);
+ current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe,
+ IW_EV_QUAL_LEN);
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = SIOCGIWENCODE;
+ if (cie->ie_capInfo & IEEE80211_CAPINFO_PRIVACY) {
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ } else {
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ }
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, "");
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ snprintf(buf, sizeof(buf), "bcn_int=%d", cie->ie_beaconInt);
+ iwe.u.data.length = strlen(buf);
+ current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, buf);
+
+ if (cie->ie_wpa != NULL) {
+ static const char wpa_leader[] = "wpa_ie=";
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wpa,
+ cie->ie_wpa[1]+2,
+ wpa_leader, sizeof(wpa_leader)-1);
+
+ if (iwe.u.data.length != 0) {
+ current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+ buf);
+ }
+ }
+
+ if (cie->ie_rsn != NULL && cie->ie_rsn[0] == IEEE80211_ELEMID_RSN) {
+ static const char rsn_leader[] = "rsn_ie=";
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_rsn,
+ cie->ie_rsn[1]+2,
+ rsn_leader, sizeof(rsn_leader)-1);
+
+ if (iwe.u.data.length != 0) {
+ current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+ buf);
+ }
+ }
+
+ if (cie->ie_wmm != NULL) {
+ static const char wmm_leader[] = "wmm_ie=";
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wmm,
+ cie->ie_wmm[1]+2,
+ wmm_leader, sizeof(wmm_leader)-1);
+ if (iwe.u.data.length != 0) {
+ current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+ buf);
+ }
+ }
+
+ if (cie->ie_ath != NULL) {
+ static const char ath_leader[] = "ath_ie=";
+
+ A_MEMZERO(&iwe, sizeof(iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_ath,
+ cie->ie_ath[1]+2,
+ ath_leader, sizeof(ath_leader)-1);
+ if (iwe.u.data.length != 0) {
+ current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe,
+ buf);
+ }
+ }
+
+ param->current_ev = current_ev;
+}
+
+int
+ar6000_ioctl_giwscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct ar_giwscan_param param;
+ int i;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ param.current_ev = extra;
+ param.end_buf = extra + IW_SCAN_MAX_DATA;
+ param.firstPass = TRUE;
+
+ /*
+ * Do two passes to insure WPA scan candidates
+ * are sorted to the front. This is a hack to deal with
+ * the wireless extensions capping scan results at
+ * IW_SCAN_MAX_DATA bytes. In densely populated environments
+ * it's easy to overflow this buffer (especially with WPA/RSN
+ * information elements). Note this sorting hack does not
+ * guarantee we won't overflow anyway.
+ */
+ for (i = 0; i < 2; i++) {
+ /*
+ * Translate data to WE format.
+ */
+ wmi_iterate_nodes(ar->arWmi, ar6000_scan_node, ¶m);
+ param.firstPass = FALSE;
+ if (param.current_ev >= param.end_buf) {
+ data->length = param.current_ev - extra;
+ return -E2BIG;
+ }
+ }
+
+ data->length = param.current_ev - extra;
+ return 0;
+}
+
+extern int reconnect_flag;
+/* SIOCSIWESSID */
+static int
+ar6000_ioctl_siwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *ssid)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ A_STATUS status;
+ A_UINT8 arNetworkType;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ /*
+ * iwconfig passes a string with length excluding any trailing NUL.
+ * FIXME: we should be able to set an ESSID of 32 bytes, yet things fall
+ * over badly if we do. So we limit the ESSID to 31 bytes.
+ */
+ if (data->flags && (!data->length || data->length >= sizeof(ar->arSsid))) {
+ /*
+ * ssid is invalid
+ */
+ return -EINVAL;
+ }
+ /* Added for bug 25178, return an IOCTL error instead of target returning
+ Illegal parameter error when either the BSSID or channel is missing
+ and we cannot scan during connect.
+ */
+ if (data->flags) {
+ if (ar->arSkipScan == TRUE &&
+ (ar->arChannelHint == 0 ||
+ (!ar->arReqBssid[0] && !ar->arReqBssid[1] && !ar->arReqBssid[2] &&
+ !ar->arReqBssid[3] && !ar->arReqBssid[4] && !ar->arReqBssid[5])))
+ {
+ return -EINVAL;
+ }
+ }
+
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+
+ if (ar->arTxPending[WMI_CONTROL_PRI]) {
+ /*
+ * sleep until the command queue drains
+ */
+ wait_event_interruptible_timeout(arEvent,
+ ar->arTxPending[WMI_CONTROL_PRI] == 0, wmitimeout * HZ);
+ if (signal_pending(current)) {
+ return -EINTR;
+ }
+ }
+
+ if (!data->flags) {
+ arNetworkType = ar->arNetworkType;
+ ar6000_init_profile_info(ar);
+ ar->arNetworkType = arNetworkType;
+ }
+
+ /*
+ * The original logic here prevented a disconnect if issuing an "essid off"
+ * if no ESSID was set, presumably to prevent sending multiple disconnects
+ * to the WMI.
+ *
+ * Unfortunately, this also meant that no disconnect was sent when we were
+ * already connected, but the profile has been changed since (which also
+ * clears the ESSID as a reminder that the WMI needs updating.)
+ *
+ * The "1 ||" makes sure we always disconnect or reconnect. The WMI doesn't
+ * seem to mind being sent multiple disconnects.
+ */
+ if (1 || (ar->arSsidLen) || (!data->flags))
+ {
+ if ((!data->flags) ||
+ (A_MEMCMP(ar->arSsid, ssid, ar->arSsidLen) != 0) ||
+ (ar->arSsidLen != (data->length)))
+ {
+ /*
+ * SSID set previously or essid off has been issued.
+ *
+ * Disconnect Command is issued in two cases after wmi is ready
+ * (1) ssid is different from the previous setting
+ * (2) essid off has been issued
+ *
+ */
+ if (ar->arWmiReady == TRUE) {
+ reconnect_flag = 0;
+ status = wmi_disconnect_cmd(ar->arWmi);
+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+ ar->arSsidLen = 0;
+ if (ar->arSkipScan == FALSE) {
+ A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+ }
+ if (!data->flags) {
+ up(&ar->arSem);
+ return 0;
+ }
+ } else {
+ up(&ar->arSem);
+ }
+ }
+ else
+ {
+ /*
+ * SSID is same, so we assume profile hasn't changed.
+ * If the interface is up and wmi is ready, we issue
+ * a reconnect cmd. Issue a reconnect only we are already
+ * connected.
+ */
+ if((ar->arConnected == TRUE) && (ar->arWmiReady == TRUE))
+ {
+ reconnect_flag = TRUE;
+ status = wmi_reconnect_cmd(ar->arWmi,ar->arReqBssid,
+ ar->arChannelHint);
+ up(&ar->arSem);
+ if (status != A_OK) {
+ return -EIO;
+ }
+ return 0;
+ }
+ else{
+ /*
+ * Dont return if connect is pending.
+ */
+ if(!(ar->arConnectPending)) {
+ up(&ar->arSem);
+ return 0;
+ }
+ }
+ }
+ }
+
+ ar->arSsidLen = data->length;
+ A_MEMCPY(ar->arSsid, ssid, ar->arSsidLen);
+
+ /* The ssid length check prevents second "essid off" from the user,
+ to be treated as a connect cmd. The second "essid off" is ignored.
+ */
+ if((ar->arWmiReady == TRUE) && (ar->arSsidLen > 0) )
+ {
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+ if (SHARED_AUTH == ar->arDot11AuthMode) {
+ ar6000_install_static_wep_keys(ar);
+ }
+ AR_DEBUG_PRINTF("Connect called with authmode %d dot11 auth %d"\
+ " PW crypto %d PW crypto Len %d GRP crypto %d"\
+ " GRP crypto Len %d\n",
+ ar->arAuthMode, ar->arDot11AuthMode,
+ ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
+ ar->arGroupCrypto, ar->arGroupCryptoLen);
+ reconnect_flag = 0;
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+ status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
+ ar->arDot11AuthMode, ar->arAuthMode,
+ ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
+ ar->arGroupCrypto,ar->arGroupCryptoLen,
+ ar->arSsidLen, ar->arSsid,
+ ar->arReqBssid, ar->arChannelHint,
+ ar->arConnectCtrlFlags);
+
+
+ up(&ar->arSem);
+
+ if (status != A_OK) {
+ return -EIO;
+ }
+ ar->arConnectPending = TRUE;
+ }else{
+ up(&ar->arSem);
+ }
+ return 0;
+}
+
+/* SIOCGIWESSID */
+static int
+ar6000_ioctl_giwessid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *essid)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ data->flags = 1;
+ data->length = ar->arSsidLen;
+ A_MEMCPY(essid, ar->arSsid, ar->arSsidLen);
+
+ return 0;
+}
+
+
+void ar6000_install_static_wep_keys(AR_SOFTC_T *ar)
+{
+ A_UINT8 index;
+ A_UINT8 keyUsage;
+
+ for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) {
+ if (ar->arWepKeyList[index].arKeyLen) {
+ keyUsage = GROUP_USAGE;
+ if (index == ar->arDefTxKeyIndex) {
+ keyUsage |= TX_USAGE;
+ }
+ wmi_addKey_cmd(ar->arWmi,
+ index,
+ WEP_CRYPT,
+ keyUsage,
+ ar->arWepKeyList[index].arKeyLen,
+ NULL,
+ ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL,
+ NO_SYNC_WMIFLAG);
+ }
+ }
+}
+
+int
+ar6000_ioctl_delkey(struct net_device *dev, struct iw_request_info *info,
+ void *w, char *extra)
+{
+ return 0;
+}
+
+int
+ar6000_ioctl_setmlme(struct net_device *dev, struct iw_request_info *info,
+ void *w, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct ieee80211req_mlme *mlme = (struct ieee80211req_mlme *)extra;
+
+ if ((ar->arWmiReady == FALSE) || (ar->arConnected != TRUE))
+ return -EIO;
+
+ switch (mlme->im_op) {
+ case IEEE80211_MLME_DISASSOC:
+ case IEEE80211_MLME_DEAUTH:
+ /* Not Supported */
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+
+int
+ar6000_ioctl_setwmmparams(struct net_device *dev, struct iw_request_info *info,
+ void *w, char *extra)
+{
+ return -EIO; /* for now */
+}
+
+int
+ar6000_ioctl_getwmmparams(struct net_device *dev, struct iw_request_info *info,
+ void *w, char *extra)
+{
+ return -EIO; /* for now */
+}
+
+int ar6000_ioctl_setoptie(struct net_device *dev, struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+ /* The target generates the WPA/RSN IE */
+ return 0;
+}
+
+int
+ar6000_ioctl_setauthalg(struct net_device *dev, struct iw_request_info *info,
+ void *w, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct ieee80211req_authalg *req = (struct ieee80211req_authalg *)extra;
+ int ret = 0;
+
+
+ AR6000_SPIN_LOCK(&ar->arLock, 0);
+
+ if (req->auth_alg == AUTH_ALG_OPEN_SYSTEM) {
+ ar->arDot11AuthMode = OPEN_AUTH;
+ } else if (req->auth_alg == AUTH_ALG_LEAP) {
+ ar->arDot11AuthMode = LEAP_AUTH;
+ ar->arPairwiseCrypto = WEP_CRYPT;
+ ar->arGroupCrypto = WEP_CRYPT;
+ } else {
+ ret = -EIO;
+ }
+
+ AR6000_SPIN_UNLOCK(&ar->arLock, 0);
+
+ return ret;
+}
+static int
+ar6000_ioctl_addpmkid(struct net_device *dev, struct iw_request_info *info,
+ void *w, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct ieee80211req_addpmkid *req = (struct ieee80211req_addpmkid *)extra;
+ A_STATUS status;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ AR_DEBUG_PRINTF("Add pmkid for %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x en=%d\n",
+ req->pi_bssid[0], req->pi_bssid[1], req->pi_bssid[2],
+ req->pi_bssid[3], req->pi_bssid[4], req->pi_bssid[5],
+ req->pi_enable);
+
+ status = wmi_setPmkid_cmd(ar->arWmi, req->pi_bssid, req->pi_pmkid,
+ req->pi_enable);
+
+ if (status != A_OK) {
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * SIOCSIWRATE
+ */
+int
+ar6000_ioctl_siwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ A_UINT32 kbps;
+
+ if (rrq->fixed) {
+ kbps = rrq->value / 1000; /* rrq->value is in bps */
+ } else {
+ kbps = -1; /* -1 indicates auto rate */
+ }
+ if(kbps != -1 && wmi_validate_bitrate(ar->arWmi, kbps) == A_EINVAL)
+ {
+ AR_DEBUG_PRINTF("BitRate is not Valid %d\n", kbps);
+ return -EINVAL;
+ }
+ ar->arBitRate = kbps;
+ if(ar->arWmiReady == TRUE)
+ {
+ if (wmi_set_bitrate_cmd(ar->arWmi, kbps) != A_OK) {
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+/*
+ * SIOCGIWRATE
+ */
+int
+ar6000_ioctl_giwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ int ret = 0;
+
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+ if(ar->arWmiReady == TRUE)
+ {
+ ar->arBitRate = 0xFFFF;
+ if (wmi_get_bitrate_cmd(ar->arWmi) != A_OK) {
+ up(&ar->arSem);
+ return -EIO;
+ }
+ wait_event_interruptible_timeout(arEvent, ar->arBitRate != 0xFFFF, wmitimeout * HZ);
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ }
+ }
+ /* If the interface is down or wmi is not ready or the target is not
+ connected - return the value stored in the device structure */
+ if (!ret) {
+ if (ar->arBitRate == -1) {
+ rrq->fixed = TRUE;
+ rrq->value = 0;
+ } else {
+ rrq->value = ar->arBitRate * 1000;
+ }
+ }
+
+ up(&ar->arSem);
+
+ return ret;
+}
+
+/*
+ * SIOCSIWTXPOW
+ */
+static int
+ar6000_ioctl_siwtxpow(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ A_UINT8 dbM;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (ar->arRadioSwitch == WLAN_ENABLED
+ && rrq->disabled) {
+ if (wmi_switch_radio(ar->arWmi, WLAN_DISABLED) < 0)
+ return -EIO;
+ ar->arRadioSwitch = WLAN_DISABLED;
+ } else if (ar->arRadioSwitch == WLAN_DISABLED
+ && !rrq->disabled) {
+ if (wmi_switch_radio(ar->arWmi, WLAN_ENABLED) < 0)
+ return -EIO;
+ ar->arRadioSwitch = WLAN_ENABLED;
+ }
+
+ if (rrq->fixed) {
+ if (rrq->flags != IW_TXPOW_DBM) {
+ return -EOPNOTSUPP;
+ }
+ ar->arTxPwr= dbM = rrq->value;
+ ar->arTxPwrSet = TRUE;
+ } else {
+ ar->arTxPwr = dbM = 0;
+ ar->arTxPwrSet = FALSE;
+ }
+ if(ar->arWmiReady == TRUE)
+ {
+ AR_DEBUG_PRINTF("Set tx pwr cmd %d dbM\n", dbM);
+ wmi_set_txPwr_cmd(ar->arWmi, dbM);
+ }
+ return 0;
+}
+
+/*
+ * SIOCGIWTXPOW
+ */
+int
+ar6000_ioctl_giwtxpow(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ int ret = 0;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (ar->arRadioSwitch == WLAN_DISABLED) {
+ rrq->disabled = 1;
+ return 0;
+ }
+
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+ if((ar->arWmiReady == TRUE) && (ar->arConnected == TRUE))
+ {
+ ar->arTxPwr = 0;
+
+ if (wmi_get_txPwr_cmd(ar->arWmi) != A_OK) {
+ up(&ar->arSem);
+ return -EIO;
+ }
+
+ wait_event_interruptible_timeout(arEvent, ar->arTxPwr != 0, wmitimeout * HZ);
+
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ }
+ }
+ /* If the interace is down or wmi is not ready or target is not connected
+ then return value stored in the device structure */
+
+ if (!ret) {
+ if (ar->arTxPwrSet == TRUE) {
+ rrq->fixed = TRUE;
+ }
+ rrq->value = ar->arTxPwr;
+ rrq->flags = IW_TXPOW_DBM;
+ }
+
+ up(&ar->arSem);
+
+ return ret;
+}
+
+/*
+ * SIOCSIWRETRY
+ * since iwconfig only provides us with one max retry value, we use it
+ * to apply to data frames of the BE traffic class.
+ */
+static int
+ar6000_ioctl_siwretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (rrq->disabled) {
+ return -EOPNOTSUPP;
+ }
+
+ if ((rrq->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT) {
+ return -EOPNOTSUPP;
+ }
+
+ if ( !(rrq->value >= WMI_MIN_RETRIES) || !(rrq->value <= WMI_MAX_RETRIES)) {
+ return - EINVAL;
+ }
+ if(ar->arWmiReady == TRUE)
+ {
+ if (wmi_set_retry_limits_cmd(ar->arWmi, DATA_FRAMETYPE, WMM_AC_BE,
+ rrq->value, 0) != A_OK){
+ return -EINVAL;
+ }
+ }
+ ar->arMaxRetries = rrq->value;
+ return 0;
+}
+
+/*
+ * SIOCGIWRETRY
+ */
+static int
+ar6000_ioctl_giwretry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rrq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ rrq->disabled = 0;
+ switch (rrq->flags & IW_RETRY_TYPE) {
+ case IW_RETRY_LIFETIME:
+ return -EOPNOTSUPP;
+ break;
+ case IW_RETRY_LIMIT:
+ rrq->flags = IW_RETRY_LIMIT;
+ switch (rrq->flags & IW_RETRY_MODIFIER) {
+ case IW_RETRY_MIN:
+ rrq->flags |= IW_RETRY_MIN;
+ rrq->value = WMI_MIN_RETRIES;
+ break;
+ case IW_RETRY_MAX:
+ rrq->flags |= IW_RETRY_MAX;
+ rrq->value = ar->arMaxRetries;
+ break;
+ }
+ break;
+ }
+ return 0;
+}
+
+/*
+ * SIOCSIWENCODE
+ */
+static int
+ar6000_ioctl_siwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq, char *keybuf)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ int index;
+ A_INT32 auth = ar->arDot11AuthMode;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ index = erq->flags & IW_ENCODE_INDEX;
+
+ if (index && (((index - 1) < WMI_MIN_KEY_INDEX) ||
+ ((index - 1) > WMI_MAX_KEY_INDEX)))
+ {
+ return -EIO;
+ }
+
+ if (erq->flags & IW_ENCODE_DISABLED) {
+ /*
+ * Encryption disabled
+ */
+ if (index) {
+ /*
+ * If key index was specified then clear the specified key
+ */
+ index--;
+ A_MEMZERO(ar->arWepKeyList[index].arKey,
+ sizeof(ar->arWepKeyList[index].arKey));
+ ar->arWepKeyList[index].arKeyLen = 0;
+ }
+ ar->arDot11AuthMode = OPEN_AUTH;
+ ar->arPairwiseCrypto = NONE_CRYPT;
+ ar->arGroupCrypto = NONE_CRYPT;
+ ar->arAuthMode = NONE_AUTH;
+ } else {
+ /*
+ * Enabling WEP encryption
+ */
+ if (index) {
+ index--; /* keyindex is off base 1 in iwconfig */
+ }
+
+ if (erq->flags & IW_ENCODE_OPEN) {
+ auth = OPEN_AUTH;
+ } else if (erq->flags & IW_ENCODE_RESTRICTED) {
+ auth = SHARED_AUTH;
+ }
+
+ if (erq->length) {
+ if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(erq->length)) {
+ return -EIO;
+ }
+
+ A_MEMZERO(ar->arWepKeyList[index].arKey,
+ sizeof(ar->arWepKeyList[index].arKey));
+ A_MEMCPY(ar->arWepKeyList[index].arKey, keybuf, erq->length);
+ ar->arWepKeyList[index].arKeyLen = erq->length;
+ } else {
+ if (ar->arWepKeyList[index].arKeyLen == 0) {
+ return -EIO;
+ }
+ ar->arDefTxKeyIndex = index;
+ }
+
+ ar->arPairwiseCrypto = WEP_CRYPT;
+ ar->arGroupCrypto = WEP_CRYPT;
+ ar->arDot11AuthMode = auth;
+ ar->arAuthMode = NONE_AUTH;
+ }
+
+ /*
+ * profile has changed. Erase ssid to signal change
+ */
+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+ ar->arSsidLen = 0;
+
+ return 0;
+}
+
+static int
+ar6000_ioctl_giwencode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *erq, char *key)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ A_UINT8 keyIndex;
+ struct ar_wep_key *wk;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (ar->arPairwiseCrypto == NONE_CRYPT) {
+ erq->length = 0;
+ erq->flags = IW_ENCODE_DISABLED;
+ } else {
+ /* get the keyIndex */
+ keyIndex = erq->flags & IW_ENCODE_INDEX;
+ if (0 == keyIndex) {
+ keyIndex = ar->arDefTxKeyIndex;
+ } else if ((keyIndex - 1 < WMI_MIN_KEY_INDEX) ||
+ (keyIndex - 1 > WMI_MAX_KEY_INDEX))
+ {
+ keyIndex = WMI_MIN_KEY_INDEX;
+ } else {
+ keyIndex--;
+ }
+ erq->flags = keyIndex + 1;
+ erq->flags |= IW_ENCODE_ENABLED;
+ wk = &ar->arWepKeyList[keyIndex];
+ if (erq->length > wk->arKeyLen) {
+ erq->length = wk->arKeyLen;
+ }
+ if (wk->arKeyLen) {
+ A_MEMCPY(key, wk->arKey, erq->length);
+ }
+ if (ar->arDot11AuthMode == OPEN_AUTH) {
+ erq->flags |= IW_ENCODE_OPEN;
+ } else if (ar->arDot11AuthMode == SHARED_AUTH) {
+ erq->flags |= IW_ENCODE_RESTRICTED;
+ }
+ }
+
+ return 0;
+}
+
+static int ar6000_ioctl_siwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ WMI_POWER_MODE power_mode;
+
+ if (wrqu->power.disabled)
+ power_mode = MAX_PERF_POWER;
+ else
+ power_mode = REC_POWER;
+
+ if (wmi_powermode_cmd(ar->arWmi, power_mode) < 0)
+ return -EIO;
+
+ return 0;
+}
+
+static int ar6000_ioctl_giwpower(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ /*
+ * FIXME:
+ * https://docs.openmoko.org/trac/ticket/2267
+ * When starting wpa_supplicant the kernel oopses.
+ * The following condition avoids the oops.
+ * Remove this comment to bless this solution.
+ */
+ if (ar->arWlanState == WLAN_DISABLED || ar->arWmiReady == FALSE)
+ return -EIO;
+
+ return wmi_get_power_mode_cmd(ar->arWmi);
+}
+
+static int ar6000_ioctl_siwgenie(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ /* The target does that for us */
+ return 0;
+}
+
+static int ar6000_ioctl_giwgenie(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ return 0;
+}
+
+static int ar6000_ioctl_siwauth(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *param,
+ char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ int reset = 0;
+
+ switch (param->flags & IW_AUTH_INDEX) {
+ case IW_AUTH_WPA_VERSION:
+ if (param->value & IW_AUTH_WPA_VERSION_DISABLED) {
+ ar->arAuthMode = NONE_AUTH;
+ }
+ if (param->value & IW_AUTH_WPA_VERSION_WPA) {
+ ar->arAuthMode = WPA_AUTH;
+ }
+ if (param->value & IW_AUTH_WPA_VERSION_WPA2) {
+ ar->arAuthMode = WPA2_AUTH;
+ }
+
+ reset = 1;
+ break;
+ case IW_AUTH_CIPHER_PAIRWISE:
+ if (param->value & IW_AUTH_CIPHER_NONE) {
+ ar->arPairwiseCrypto = NONE_CRYPT;
+ }
+ if (param->value & IW_AUTH_CIPHER_WEP40) {
+ ar->arPairwiseCrypto = WEP_CRYPT;
+ }
+ if (param->value & IW_AUTH_CIPHER_TKIP) {
+ ar->arPairwiseCrypto = TKIP_CRYPT;
+ }
+ if (param->value & IW_AUTH_CIPHER_CCMP) {
+ ar->arPairwiseCrypto = AES_CRYPT;
+ }
+
+ reset = 1;
+ break;
+ case IW_AUTH_CIPHER_GROUP:
+ if (param->value & IW_AUTH_CIPHER_NONE) {
+ ar->arGroupCrypto = NONE_CRYPT;
+ }
+ if (param->value & IW_AUTH_CIPHER_WEP40) {
+ ar->arGroupCrypto = WEP_CRYPT;
+ }
+ if (param->value & IW_AUTH_CIPHER_TKIP) {
+ ar->arGroupCrypto = TKIP_CRYPT;
+ }
+ if (param->value & IW_AUTH_CIPHER_CCMP) {
+ ar->arGroupCrypto = AES_CRYPT;
+ }
+
+ reset = 1;
+ break;
+ case IW_AUTH_KEY_MGMT:
+ if (param->value & IW_AUTH_KEY_MGMT_PSK) {
+ if (ar->arAuthMode == WPA_AUTH) {
+ ar->arAuthMode = WPA_PSK_AUTH;
+ } else if (ar->arAuthMode == WPA2_AUTH) {
+ ar->arAuthMode = WPA2_PSK_AUTH;
+ }
+
+ reset = 1;
+ }
+ break;
+
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ wmi_set_tkip_countermeasures_cmd(ar->arWmi, param->value);
+ break;
+
+ case IW_AUTH_DROP_UNENCRYPTED:
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+ if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) {
+ ar->arDot11AuthMode = OPEN_AUTH;
+ }
+ if (param->value & IW_AUTH_ALG_SHARED_KEY) {
+ ar->arDot11AuthMode = SHARED_AUTH;
+ }
+ if (param->value & IW_AUTH_ALG_LEAP) {
+ ar->arDot11AuthMode = LEAP_AUTH;
+ ar->arPairwiseCrypto = WEP_CRYPT;
+ ar->arGroupCrypto = WEP_CRYPT;
+ }
+
+ reset = 1;
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ reset = 1;
+ break;
+
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ break;
+
+ case IW_AUTH_PRIVACY_INVOKED:
+ break;
+
+ default:
+ printk("%s(): Unknown flag 0x%x\n", __FUNCTION__, param->flags);
+ return -EOPNOTSUPP;
+ }
+
+ if (reset) {
+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+ ar->arSsidLen = 0;
+ }
+
+ return 0;
+}
+
+static int ar6000_ioctl_giwauth(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *dwrq,
+ char *extra)
+{
+ return 0;
+}
+
+static int ar6000_ioctl_siwencodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct iw_point *encoding = &wrqu->encoding;
+ struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
+ int alg = ext->alg, idx;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ /* Determine and validate the key index */
+ idx = (encoding->flags & IW_ENCODE_INDEX) - 1;
+ if (idx) {
+ if (idx < 0 || idx > 3)
+ return -EINVAL;
+ }
+
+ if ((alg == IW_ENCODE_ALG_TKIP) || (alg == IW_ENCODE_ALG_CCMP)) {
+ struct ieee80211req_key ik;
+ KEY_USAGE key_usage;
+ CRYPTO_TYPE key_type = NONE_CRYPT;
+ int status;
+
+ ar->user_saved_keys.keyOk = FALSE;
+
+ if (alg == IW_ENCODE_ALG_TKIP) {
+ key_type = TKIP_CRYPT;
+ ik.ik_type = IEEE80211_CIPHER_TKIP;
+ } else {
+ key_type = AES_CRYPT;
+ ik.ik_type = IEEE80211_CIPHER_AES_CCM;
+ }
+
+ ik.ik_keyix = idx;
+ ik.ik_keylen = ext->key_len;
+ ik.ik_flags = IEEE80211_KEY_RECV;
+ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ ik.ik_flags |= IEEE80211_KEY_XMIT
+ | IEEE80211_KEY_DEFAULT;
+ }
+
+ if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
+ memcpy(&ik.ik_keyrsc, ext->rx_seq, 8);
+ }
+
+ memcpy(ik.ik_keydata, ext->key, ext->key_len);
+
+ ar->user_saved_keys.keyType = key_type;
+ if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+ key_usage = GROUP_USAGE;
+ memset(ik.ik_macaddr, 0, ETH_ALEN);
+ memcpy(&ar->user_saved_keys.bcast_ik, &ik,
+ sizeof(struct ieee80211req_key));
+ } else {
+ key_usage = PAIRWISE_USAGE;
+ memcpy(ik.ik_macaddr, ext->addr.sa_data, ETH_ALEN);
+ memcpy(&ar->user_saved_keys.ucast_ik, &ik,
+ sizeof(struct ieee80211req_key));
+ }
+
+ status = wmi_addKey_cmd(ar->arWmi, ik.ik_keyix, key_type,
+ key_usage, ik.ik_keylen,
+ (A_UINT8 *)&ik.ik_keyrsc,
+ ik.ik_keydata,
+ KEY_OP_INIT_VAL, SYNC_BEFORE_WMIFLAG);
+
+ if (status < 0)
+ return -EIO;
+
+ ar->user_saved_keys.keyOk = TRUE;
+
+ return 0;
+
+ } else {
+ /* WEP falls back to SIWENCODE */
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+
+static int ar6000_ioctl_giwencodeext(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ return 0;
+}
+
+
+static int
+ar6000_ioctl_setparam(struct net_device *dev,
+ struct iw_request_info *info,
+ void *erq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ int *i = (int *)extra;
+ int param = i[0];
+ int value = i[1];
+ int ret = 0;
+ A_BOOL profChanged = FALSE;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ switch (param) {
+ case IEEE80211_PARAM_WPA:
+ switch (value) {
+ case WPA_MODE_WPA1:
+ ar->arAuthMode = WPA_AUTH;
+ profChanged = TRUE;
+ break;
+ case WPA_MODE_WPA2:
+ ar->arAuthMode = WPA2_AUTH;
+ profChanged = TRUE;
+ break;
+ case WPA_MODE_NONE:
+ ar->arAuthMode = NONE_AUTH;
+ profChanged = TRUE;
+ break;
+ default:
+ printk("IEEE80211_PARAM_WPA: Unknown value %d\n", value);
+ }
+ break;
+ case IEEE80211_PARAM_AUTHMODE:
+ switch(value) {
+ case IEEE80211_AUTH_WPA_PSK:
+ if (WPA_AUTH == ar->arAuthMode) {
+ ar->arAuthMode = WPA_PSK_AUTH;
+ profChanged = TRUE;
+ } else if (WPA2_AUTH == ar->arAuthMode) {
+ ar->arAuthMode = WPA2_PSK_AUTH;
+ profChanged = TRUE;
+ } else {
+ AR_DEBUG_PRINTF("Error - Setting PSK mode when WPA "\
+ "param was set to %d\n",
+ ar->arAuthMode);
+ ret = -1;
+ }
+ break;
+ case IEEE80211_AUTH_WPA_CCKM:
+ if (WPA2_AUTH == ar->arAuthMode) {
+ ar->arAuthMode = WPA2_AUTH_CCKM;
+ } else {
+ ar->arAuthMode = WPA_AUTH_CCKM;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ case IEEE80211_PARAM_UCASTCIPHER:
+ switch (value) {
+ case IEEE80211_CIPHER_AES_CCM:
+ ar->arPairwiseCrypto = AES_CRYPT;
+ profChanged = TRUE;
+ break;
+ case IEEE80211_CIPHER_TKIP:
+ ar->arPairwiseCrypto = TKIP_CRYPT;
+ profChanged = TRUE;
+ break;
+ case IEEE80211_CIPHER_WEP:
+ ar->arPairwiseCrypto = WEP_CRYPT;
+ profChanged = TRUE;
+ break;
+ case IEEE80211_CIPHER_NONE:
+ ar->arPairwiseCrypto = NONE_CRYPT;
+ profChanged = TRUE;
+ break;
+ }
+ break;
+ case IEEE80211_PARAM_UCASTKEYLEN:
+ if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
+ ret = -EIO;
+ } else {
+ ar->arPairwiseCryptoLen = value;
+ }
+ break;
+ case IEEE80211_PARAM_MCASTCIPHER:
+ switch (value) {
+ case IEEE80211_CIPHER_AES_CCM:
+ ar->arGroupCrypto = AES_CRYPT;
+ profChanged = TRUE;
+ break;
+ case IEEE80211_CIPHER_TKIP:
+ ar->arGroupCrypto = TKIP_CRYPT;
+ profChanged = TRUE;
+ break;
+ case IEEE80211_CIPHER_WEP:
+ ar->arGroupCrypto = WEP_CRYPT;
+ profChanged = TRUE;
+ break;
+ case IEEE80211_CIPHER_NONE:
+ ar->arGroupCrypto = NONE_CRYPT;
+ profChanged = TRUE;
+ break;
+ }
+ break;
+ case IEEE80211_PARAM_MCASTKEYLEN:
+ if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) {
+ ret = -EIO;
+ } else {
+ ar->arGroupCryptoLen = value;
+ }
+ break;
+ case IEEE80211_PARAM_COUNTERMEASURES:
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+ wmi_set_tkip_countermeasures_cmd(ar->arWmi, value);
+ break;
+ default:
+ break;
+ }
+
+ if (profChanged == TRUE) {
+ /*
+ * profile has changed. Erase ssid to signal change
+ */
+ A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
+ ar->arSsidLen = 0;
+ }
+
+ return ret;
+}
+
+int
+ar6000_ioctl_getparam(struct net_device *dev, struct iw_request_info *info,
+ void *w, char *extra)
+{
+ return -EIO; /* for now */
+}
+
+int
+ar6000_ioctl_setkey(struct net_device *dev, struct iw_request_info *info,
+ void *w, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct ieee80211req_key *ik = (struct ieee80211req_key *)extra;
+ KEY_USAGE keyUsage;
+ A_STATUS status;
+ CRYPTO_TYPE keyType = NONE_CRYPT;
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ ar->user_saved_keys.keyOk = FALSE;
+
+ if ( 0 == memcmp(ik->ik_macaddr, "\x00\x00\x00\x00\x00\x00",
+ IEEE80211_ADDR_LEN)) {
+ keyUsage = GROUP_USAGE;
+ A_MEMCPY(&ar->user_saved_keys.bcast_ik, ik,
+ sizeof(struct ieee80211req_key));
+ } else {
+ keyUsage = PAIRWISE_USAGE;
+ A_MEMCPY(&ar->user_saved_keys.ucast_ik, ik,
+ sizeof(struct ieee80211req_key));
+ }
+
+ switch (ik->ik_type) {
+ case IEEE80211_CIPHER_WEP:
+ keyType = WEP_CRYPT;
+ break;
+ case IEEE80211_CIPHER_TKIP:
+ keyType = TKIP_CRYPT;
+ break;
+ case IEEE80211_CIPHER_AES_CCM:
+ keyType = AES_CRYPT;
+ break;
+ default:
+ break;
+ }
+ ar->user_saved_keys.keyType = keyType;
+
+ if (IEEE80211_CIPHER_CCKM_KRK != ik->ik_type) {
+ if (NONE_CRYPT == keyType) {
+ return -EIO;
+ }
+
+ status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, keyUsage,
+ ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc,
+ ik->ik_keydata, KEY_OP_INIT_VAL,
+ SYNC_BEFORE_WMIFLAG);
+
+ if (status != A_OK) {
+ return -EIO;
+ }
+ } else {
+ status = wmi_add_krk_cmd(ar->arWmi, ik->ik_keydata);
+ }
+
+ ar->user_saved_keys.keyOk = TRUE;
+
+ return 0;
+}
+
+
+/*
+ * SIOCGIWNAME
+ */
+int
+ar6000_ioctl_giwname(struct net_device *dev,
+ struct iw_request_info *info,
+ char *name, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ switch (ar->arPhyCapability) {
+ case (WMI_11A_CAPABILITY):
+ strncpy(name, "AR6000 802.11a", IFNAMSIZ);
+ break;
+ case (WMI_11G_CAPABILITY):
+ strncpy(name, "AR6000 802.11g", IFNAMSIZ);
+ break;
+ case (WMI_11AG_CAPABILITY):
+ strncpy(name, "AR6000 802.11ag", IFNAMSIZ);
+ break;
+ default:
+ strncpy(name, "AR6000 802.11", IFNAMSIZ);
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * SIOCSIWFREQ
+ */
+int
+ar6000_ioctl_siwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ /*
+ * We support limiting the channels via wmiconfig.
+ *
+ * We use this command to configure the channel hint for the connect cmd
+ * so it is possible the target will end up connecting to a different
+ * channel.
+ */
+ if (freq->e > 1) {
+ return -EINVAL;
+ } else if (freq->e == 1) {
+ ar->arChannelHint = freq->m / 100000;
+ } else {
+ ar->arChannelHint = wlan_ieee2freq(freq->m);
+ }
+
+ A_PRINTF("channel hint set to %d\n", ar->arChannelHint);
+ return 0;
+}
+
+/*
+ * SIOCGIWFREQ
+ */
+int
+ar6000_ioctl_giwfreq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *freq, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (ar->arConnected != TRUE) {
+ return -EINVAL;
+ }
+
+ freq->m = ar->arBssChannel * 100000;
+ freq->e = 1;
+
+ return 0;
+}
+
+/*
+ * SIOCSIWMODE
+ */
+int
+ar6000_ioctl_siwmode(struct net_device *dev,
+ struct iw_request_info *info,
+ __u32 *mode, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ switch (*mode) {
+ case IW_MODE_INFRA:
+ ar->arNetworkType = INFRA_NETWORK;
+ break;
+ case IW_MODE_ADHOC:
+ ar->arNetworkType = ADHOC_NETWORK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * SIOCGIWMODE
+ */
+int
+ar6000_ioctl_giwmode(struct net_device *dev,
+ struct iw_request_info *info,
+ __u32 *mode, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ switch (ar->arNetworkType) {
+ case INFRA_NETWORK:
+ *mode = IW_MODE_INFRA;
+ break;
+ case ADHOC_NETWORK:
+ *mode = IW_MODE_ADHOC;
+ break;
+ default:
+ return -EIO;
+ }
+ return 0;
+}
+
+/*
+ * SIOCSIWSENS
+ */
+int
+ar6000_ioctl_siwsens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *sens, char *extra)
+{
+ return 0;
+}
+
+/*
+ * SIOCGIWSENS
+ */
+int
+ar6000_ioctl_giwsens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *sens, char *extra)
+{
+ sens->value = 0;
+ sens->fixed = 1;
+
+ return 0;
+}
+
+/*
+ * SIOCGIWRANGE
+ */
+int
+ar6000_ioctl_giwrange(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ struct iw_range *range = (struct iw_range *) extra;
+ int i, ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (down_interruptible(&ar->arSem)) {
+ return -ERESTARTSYS;
+ }
+ ar->arNumChannels = -1;
+ A_MEMZERO(ar->arChannelList, sizeof (ar->arChannelList));
+
+ if (wmi_get_channelList_cmd(ar->arWmi) != A_OK) {
+ up(&ar->arSem);
+ return -EIO;
+ }
+
+ wait_event_interruptible_timeout(arEvent, ar->arNumChannels != -1, wmitimeout * HZ);
+
+ if (signal_pending(current)) {
+ up(&ar->arSem);
+ return -EINTR;
+ }
+
+ data->length = sizeof(struct iw_range);
+ A_MEMZERO(range, sizeof(struct iw_range));
+
+ range->txpower_capa = IW_TXPOW_DBM;
+
+ range->min_pmp = 1 * 1024;
+ range->max_pmp = 65535 * 1024;
+ range->min_pmt = 1 * 1024;
+ range->max_pmt = 1000 * 1024;
+ range->pmp_flags = IW_POWER_PERIOD;
+ range->pmt_flags = IW_POWER_TIMEOUT;
+ range->pm_capa = 0;
+
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 13;
+
+ range->retry_capa = IW_RETRY_LIMIT;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->min_retry = 0;
+ range->max_retry = 255;
+
+ range->num_frequency = range->num_channels = ar->arNumChannels;
+ for (i = 0; i < ar->arNumChannels; i++) {
+ range->freq[i].i = wlan_freq2ieee(ar->arChannelList[i]);
+ range->freq[i].m = ar->arChannelList[i] * 100000;
+ range->freq[i].e = 1;
+ /*
+ * Linux supports max of 32 channels, bail out once you
+ * reach the max.
+ */
+ if (i == IW_MAX_FREQUENCIES) {
+ break;
+ }
+ }
+
+ /* Max quality is max field value minus noise floor */
+ range->max_qual.qual = 0xff - 161;
+
+ /*
+ * In order to use dBm measurements, 'level' must be lower
+ * than any possible measurement (see iw_print_stats() in
+ * wireless tools). It's unclear how this is meant to be
+ * done, but setting zero in these values forces dBm and
+ * the actual numbers are not used.
+ */
+ range->max_qual.level = 0;
+ range->max_qual.noise = 0;
+
+ range->sensitivity = 3;
+
+ range->max_encoding_tokens = 4;
+ /* XXX query driver to find out supported key sizes */
+ range->num_encoding_sizes = 3;
+ range->encoding_size[0] = 5; /* 40-bit */
+ range->encoding_size[1] = 13; /* 104-bit */
+ range->encoding_size[2] = 16; /* 128-bit */
+
+ range->num_bitrates = 0;
+
+ /* estimated maximum TCP throughput values (bps) */
+ range->throughput = 22000000;
+
+ range->min_rts = 0;
+ range->max_rts = 2347;
+ range->min_frag = 256;
+ range->max_frag = 2346;
+
+ up(&ar->arSem);
+
+ return ret;
+}
+
+
+/*
+ * SIOCSIWAP
+ * This ioctl is used to set the desired bssid for the connect command.
+ */
+int
+ar6000_ioctl_siwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (ap_addr->sa_family != ARPHRD_ETHER) {
+ return -EIO;
+ }
+
+ if (A_MEMCMP(&ap_addr->sa_data, bcast_mac, AR6000_ETH_ADDR_LEN) == 0) {
+ A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
+ } else {
+ A_MEMCPY(ar->arReqBssid, &ap_addr->sa_data, sizeof(ar->arReqBssid));
+ }
+
+ return 0;
+}
+
+/*
+ * SIOCGIWAP
+ */
+int
+ar6000_ioctl_giwap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *ap_addr, char *extra)
+{
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ if (ar->arConnected != TRUE) {
+ return -EINVAL;
+ }
+
+ A_MEMCPY(&ap_addr->sa_data, ar->arBssid, sizeof(ar->arBssid));
+ ap_addr->sa_family = ARPHRD_ETHER;
+
+ return 0;
+}
+
+/*
+ * SIOCGIWAPLIST
+ */
+int
+ar6000_ioctl_iwaplist(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+ return -EIO; /* for now */
+}
+
+/*
+ * SIOCSIWSCAN
+ */
+int
+ar6000_ioctl_siwscan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+#define ACT_DWELLTIME_DEFAULT 105
+#define HOME_TXDRAIN_TIME 100
+#define SCAN_INT HOME_TXDRAIN_TIME + ACT_DWELLTIME_DEFAULT
+ AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev);
+ int ret = 0;
+
+ if (ar->arWmiReady == FALSE) {
+ return -EIO;
+ }
+
+ if (ar->arWlanState == WLAN_DISABLED) {
+ return -EIO;
+ }
+
+ /* We ask for everything from the target */
+ if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) {
+ printk("Couldn't set filtering\n");
+ ret = -EIO;
+ }
+
+ if (wmi_startscan_cmd(ar->arWmi, WMI_LONG_SCAN, FALSE, FALSE, \
+ HOME_TXDRAIN_TIME, SCAN_INT) != A_OK) {
+ ret = -EIO;
+ }
+
+ ar->scan_complete = 0;
+ wait_event_interruptible_timeout(ar6000_scan_queue, ar->scan_complete,
+ 5 * HZ);
+
+ if (wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0) != A_OK) {
+ printk("Couldn't set filtering\n");
+ ret = -EIO;
+ }
+
+ return ret;
+#undef ACT_DWELLTIME_DEFAULT
+#undef HOME_TXDRAIN_TIME
+#undef SCAN_INT
+}
+
+
+/*
+ * Units are in db above the noise floor. That means the
+ * rssi values reported in the tx/rx descriptors in the
+ * driver are the SNR expressed in db.
+ *
+ * If you assume that the noise floor is -95, which is an
+ * excellent assumption 99.5 % of the time, then you can
+ * derive the absolute signal level (i.e. -95 + rssi).
+ * There are some other slight factors to take into account
+ * depending on whether the rssi measurement is from 11b,
+ * 11g, or 11a. These differences are at most 2db and
+ * can be documented.
+ *
+ * NB: various calculations are based on the orinoco/wavelan
+ * drivers for compatibility
+ */
+static void
+ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi)
+{
+ if (rssi < 0) {
+ iq->qual = 0;
+ } else {
+ iq->qual = rssi;
+ }
+
+ /* NB: max is 94 because noise is hardcoded to 161 */
+ if (iq->qual > 94)
+ iq->qual = 94;
+
+ iq->noise = 161; /* -95dBm */
+ iq->level = iq->noise + iq->qual;
+ iq->updated = 7;
+}
+
+
+/* Structures to export the Wireless Handlers */
+static const iw_handler ath_handlers[] = {
+ (iw_handler) NULL, /* SIOCSIWCOMMIT */
+ (iw_handler) ar6000_ioctl_giwname, /* SIOCGIWNAME */
+ (iw_handler) NULL, /* SIOCSIWNWID */
+ (iw_handler) NULL, /* SIOCGIWNWID */
+ (iw_handler) ar6000_ioctl_siwfreq, /* SIOCSIWFREQ */
+ (iw_handler) ar6000_ioctl_giwfreq, /* SIOCGIWFREQ */
+ (iw_handler) ar6000_ioctl_siwmode, /* SIOCSIWMODE */
+ (iw_handler) ar6000_ioctl_giwmode, /* SIOCGIWMODE */
+ (iw_handler) ar6000_ioctl_siwsens, /* SIOCSIWSENS */
+ (iw_handler) ar6000_ioctl_giwsens, /* SIOCGIWSENS */
+ (iw_handler) NULL /* not _used */, /* SIOCSIWRANGE */
+ (iw_handler) ar6000_ioctl_giwrange, /* SIOCGIWRANGE */
+ (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */
+ (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */
+ (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */
+ (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */
+ (iw_handler) NULL, /* SIOCSIWSPY */
+ (iw_handler) NULL, /* SIOCGIWSPY */
+ (iw_handler) NULL, /* SIOCSIWTHRSPY */
+ (iw_handler) NULL, /* SIOCGIWTHRSPY */
+ (iw_handler) ar6000_ioctl_siwap, /* SIOCSIWAP */
+ (iw_handler) ar6000_ioctl_giwap, /* SIOCGIWAP */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) ar6000_ioctl_iwaplist, /* SIOCGIWAPLIST */
+ (iw_handler) ar6000_ioctl_siwscan, /* SIOCSIWSCAN */
+ (iw_handler) ar6000_ioctl_giwscan, /* SIOCGIWSCAN */
+ (iw_handler) ar6000_ioctl_siwessid, /* SIOCSIWESSID */
+ (iw_handler) ar6000_ioctl_giwessid, /* SIOCGIWESSID */
+ (iw_handler) NULL, /* SIOCSIWNICKN */
+ (iw_handler) NULL, /* SIOCGIWNICKN */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) ar6000_ioctl_siwrate, /* SIOCSIWRATE */
+ (iw_handler) ar6000_ioctl_giwrate, /* SIOCGIWRATE */
+ (iw_handler) NULL, /* SIOCSIWRTS */
+ (iw_handler) NULL, /* SIOCGIWRTS */
+ (iw_handler) NULL, /* SIOCSIWFRAG */
+ (iw_handler) NULL, /* SIOCGIWFRAG */
+ (iw_handler) ar6000_ioctl_siwtxpow, /* SIOCSIWTXPOW */
+ (iw_handler) ar6000_ioctl_giwtxpow, /* SIOCGIWTXPOW */
+ (iw_handler) ar6000_ioctl_siwretry, /* SIOCSIWRETRY */
+ (iw_handler) ar6000_ioctl_giwretry, /* SIOCGIWRETRY */
+ (iw_handler) ar6000_ioctl_siwencode, /* SIOCSIWENCODE */
+ (iw_handler) ar6000_ioctl_giwencode, /* SIOCGIWENCODE */
+ (iw_handler) ar6000_ioctl_siwpower, /* SIOCSIWPOWER */
+ (iw_handler) ar6000_ioctl_giwpower, /* SIOCGIWPOWER */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) ar6000_ioctl_siwgenie, /* SIOCSIWGENIE */
+ (iw_handler) ar6000_ioctl_giwgenie, /* SIOCGIWGENIE */
+ (iw_handler) ar6000_ioctl_siwauth, /* SIOCSIWAUTH */
+ (iw_handler) ar6000_ioctl_giwauth, /* SIOCGIWAUTH */
+ (iw_handler) ar6000_ioctl_siwencodeext,/* SIOCSIWENCODEEXT */
+ (iw_handler) ar6000_ioctl_giwencodeext,/* SIOCGIWENCODEEXT */
+ (iw_handler) NULL, /* SIOCSIWPMKSA */
+};
+
+static const iw_handler ath_priv_handlers[] = {
+ (iw_handler) ar6000_ioctl_setparam, /* SIOCWFIRSTPRIV+0 */
+ (iw_handler) ar6000_ioctl_getparam, /* SIOCWFIRSTPRIV+1 */
+ (iw_handler) ar6000_ioctl_setkey, /* SIOCWFIRSTPRIV+2 */
+ (iw_handler) ar6000_ioctl_setwmmparams, /* SIOCWFIRSTPRIV+3 */
+ (iw_handler) ar6000_ioctl_delkey, /* SIOCWFIRSTPRIV+4 */
+ (iw_handler) ar6000_ioctl_getwmmparams, /* SIOCWFIRSTPRIV+5 */
+ (iw_handler) ar6000_ioctl_setoptie, /* SIOCWFIRSTPRIV+6 */
+ (iw_handler) ar6000_ioctl_setmlme, /* SIOCWFIRSTPRIV+7 */
+ (iw_handler) ar6000_ioctl_addpmkid, /* SIOCWFIRSTPRIV+8 */
+};
+
+#define IW_PRIV_TYPE_KEY \
+ (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_key))
+#define IW_PRIV_TYPE_DELKEY \
+ (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_del_key))
+#define IW_PRIV_TYPE_MLME \
+ (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_mlme))
+#define IW_PRIV_TYPE_ADDPMKID \
+ (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_addpmkid))
+
+static const struct iw_priv_args ar6000_priv_args[] = {
+ { IEEE80211_IOCTL_SETKEY,
+ IW_PRIV_TYPE_KEY | IW_PRIV_SIZE_FIXED, 0, "setkey"},
+ { IEEE80211_IOCTL_DELKEY,
+ IW_PRIV_TYPE_DELKEY | IW_PRIV_SIZE_FIXED, 0, "delkey"},
+ { IEEE80211_IOCTL_SETPARAM,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "setparam"},
+ { IEEE80211_IOCTL_GETPARAM,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getparam"},
+ { IEEE80211_IOCTL_SETWMMPARAMS,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, 0, "setwmmparams"},
+ { IEEE80211_IOCTL_GETWMMPARAMS,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwmmparams"},
+ { IEEE80211_IOCTL_SETOPTIE,
+ IW_PRIV_TYPE_BYTE, 0, "setie"},
+ { IEEE80211_IOCTL_SETMLME,
+ IW_PRIV_TYPE_MLME, 0, "setmlme"},
+ { IEEE80211_IOCTL_ADDPMKID,
+ IW_PRIV_TYPE_ADDPMKID | IW_PRIV_SIZE_FIXED, 0, "addpmkid"},
+};
+
+void ar6000_ioctl_iwsetup(struct iw_handler_def *def)
+{
+ def->private_args = (struct iw_priv_args *)ar6000_priv_args;
+ def->num_private_args = ARRAY_SIZE(ar6000_priv_args);
+}
+
+struct iw_handler_def ath_iw_handler_def = {
+ .standard = (iw_handler *)ath_handlers,
+ .num_standard = ARRAY_SIZE(ath_handlers),
+ .private = (iw_handler *)ath_priv_handlers,
+ .num_private = ARRAY_SIZE(ath_priv_handlers),
+};
+
+
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "hif.h"
+#include "bmi.h"
+#include "htc_api.h"
+#include "bmi_internal.h"
+
+/*
+Although we had envisioned BMI to run on top of HTC, this is not what the
+final implementation boiled down to on dragon. Its a part of BSP and does
+not use the HTC protocol either. On the host side, however, we were still
+living with the original idea. I think the time has come to accept the truth
+and separate it from HTC which has been carrying BMI's burden all this while.
+It shall make HTC state machine relatively simpler
+*/
+
+/* APIs visible to the driver */
+void
+BMIInit(void)
+{
+ bmiDone = FALSE;
+}
+
+A_STATUS
+BMIDone(HIF_DEVICE *device)
+{
+ A_STATUS status;
+ A_UINT32 cid;
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n"));
+ return A_OK;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device));
+ bmiDone = TRUE;
+ cid = BMI_DONE;
+
+ status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n"));
+
+ return A_OK;
+}
+
+A_STATUS
+BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
+{
+ A_STATUS status;
+ A_UINT32 cid;
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device));
+ cid = BMI_GET_TARGET_INFO;
+
+ status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid));
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+
+ status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver,
+ sizeof(targ_info->target_ver));
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n"));
+ return A_ERROR;
+ }
+
+ if (targ_info->target_ver == TARGET_VERSION_SENTINAL) {
+ /* Determine how many bytes are in the Target's targ_info */
+ status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count,
+ sizeof(targ_info->target_info_byte_count));
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n"));
+ return A_ERROR;
+ }
+
+ /*
+ * The Target's targ_info doesn't match the Host's targ_info.
+ * We need to do some backwards compatibility work to make this OK.
+ */
+ A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info));
+
+ /* Read the remainder of the targ_info */
+ status = bmiBufferReceive(device,
+ ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count),
+ sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count));
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n",
+ targ_info->target_info_byte_count));
+ return A_ERROR;
+ }
+ } else {
+ /*
+ * Target must be an AR6001 whose firmware does not
+ * support BMI_GET_TARGET_INFO. Construct the data
+ * that it would have sent.
+ */
+ targ_info->target_info_byte_count = sizeof(targ_info);
+ targ_info->target_type = TARGET_TYPE_AR6001;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
+ targ_info->target_ver, targ_info->target_type));
+ printk("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n",
+ targ_info->target_ver, targ_info->target_type);
+
+ return A_OK;
+}
+
+A_STATUS
+BMIReadMemory(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UCHAR *buffer,
+ A_UINT32 length)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ A_UINT32 remaining, rxlen;
+ static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
+ memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length));
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
+ device, address, length));
+
+ cid = BMI_READ_MEMORY;
+
+ remaining = length;
+
+ while (remaining)
+ {
+ rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX;
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &address, sizeof(address));
+ offset += sizeof(address);
+ A_MEMCPY(&data[offset], &rxlen, sizeof(rxlen));
+ offset += sizeof(length);
+
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+ status = bmiBufferReceive(device, data, rxlen);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+ return A_ERROR;
+ }
+ A_MEMCPY(&buffer[length - remaining], data, rxlen);
+ remaining -= rxlen; address += rxlen;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n"));
+ return A_OK;
+}
+
+A_STATUS
+BMIWriteMemory(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UCHAR *buffer,
+ A_UINT32 length)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ A_UINT32 remaining, txlen;
+ const A_UINT32 header = sizeof(cid) + sizeof(address) + sizeof(length);
+ static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)];
+ memset (&data, 0, header);
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n",
+ device, address, length));
+
+ cid = BMI_WRITE_MEMORY;
+
+ remaining = length;
+ while (remaining)
+ {
+ txlen = (remaining < (BMI_DATASZ_MAX - header)) ?
+ remaining : (BMI_DATASZ_MAX - header);
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &address, sizeof(address));
+ offset += sizeof(address);
+ A_MEMCPY(&data[offset], &txlen, sizeof(txlen));
+ offset += sizeof(txlen);
+ A_MEMCPY(&data[offset], &buffer[length - remaining], txlen);
+ offset += txlen;
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+ remaining -= txlen; address += txlen;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n"));
+
+ return A_OK;
+}
+
+A_STATUS
+BMIExecute(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UINT32 *param)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(*param)];
+ memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(*param));
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
+ device, address, *param));
+
+ cid = BMI_EXECUTE;
+
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &address, sizeof(address));
+ offset += sizeof(address);
+ A_MEMCPY(&data[offset], param, sizeof(*param));
+ offset += sizeof(*param);
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+
+ status = bmiBufferReceive(device, data, sizeof(*param));
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+ return A_ERROR;
+ }
+
+ A_MEMCPY(param, data, sizeof(*param));
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param));
+ return A_OK;
+}
+
+A_STATUS
+BMISetAppStart(HIF_DEVICE *device,
+ A_UINT32 address)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ static A_UCHAR data[sizeof(cid) + sizeof(address)];
+ memset (&data, 0, sizeof(cid) + sizeof(address));
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n",
+ device, address));
+
+ cid = BMI_SET_APP_START;
+
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &address, sizeof(address));
+ offset += sizeof(address);
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n"));
+ return A_OK;
+}
+
+A_STATUS
+BMIReadSOCRegister(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UINT32 *param)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ static A_UCHAR data[sizeof(cid) + sizeof(address)];
+ memset (&data, 0, sizeof(cid) + sizeof(address));
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n",
+ device, address));
+
+ cid = BMI_READ_SOC_REGISTER;
+
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &address, sizeof(address));
+ offset += sizeof(address);
+
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+
+ status = bmiBufferReceive(device, data, sizeof(*param));
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+ return A_ERROR;
+ }
+ A_MEMCPY(param, data, sizeof(*param));
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param));
+ return A_OK;
+}
+
+A_STATUS
+BMIWriteSOCRegister(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UINT32 param)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(param)];
+
+ memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(param));
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n",
+ device, address, param));
+
+ cid = BMI_WRITE_SOC_REGISTER;
+
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &address, sizeof(address));
+ offset += sizeof(address);
+ A_MEMCPY(&data[offset], ¶m, sizeof(param));
+ offset += sizeof(param);
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n"));
+ return A_OK;
+}
+
+A_STATUS
+BMIrompatchInstall(HIF_DEVICE *device,
+ A_UINT32 ROM_addr,
+ A_UINT32 RAM_addr,
+ A_UINT32 nbytes,
+ A_UINT32 do_activate,
+ A_UINT32 *rompatch_id)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ static A_UCHAR data[sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
+ sizeof(nbytes) + sizeof(do_activate)];
+
+ memset (&data, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) +
+ sizeof(nbytes) + sizeof(do_activate));
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n",
+ device, ROM_addr, RAM_addr, nbytes, do_activate));
+
+ cid = BMI_ROMPATCH_INSTALL;
+
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &ROM_addr, sizeof(ROM_addr));
+ offset += sizeof(ROM_addr);
+ A_MEMCPY(&data[offset], &RAM_addr, sizeof(RAM_addr));
+ offset += sizeof(RAM_addr);
+ A_MEMCPY(&data[offset], &nbytes, sizeof(nbytes));
+ offset += sizeof(nbytes);
+ A_MEMCPY(&data[offset], &do_activate, sizeof(do_activate));
+ offset += sizeof(do_activate);
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+
+ status = bmiBufferReceive(device, (A_UCHAR *)rompatch_id, sizeof(*rompatch_id));
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id));
+ return A_OK;
+}
+
+A_STATUS
+BMIrompatchUninstall(HIF_DEVICE *device,
+ A_UINT32 rompatch_id)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ static A_UCHAR data[sizeof(cid) + sizeof(rompatch_id)];
+ memset (&data, 0, sizeof(cid) + sizeof(rompatch_id));
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n",
+ device, rompatch_id));
+
+ cid = BMI_ROMPATCH_UNINSTALL;
+
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &rompatch_id, sizeof(rompatch_id));
+ offset += sizeof(rompatch_id);
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id));
+ return A_OK;
+}
+
+static A_STATUS
+_BMIrompatchChangeActivation(HIF_DEVICE *device,
+ A_UINT32 rompatch_count,
+ A_UINT32 *rompatch_list,
+ A_UINT32 do_activate)
+{
+ A_UINT32 cid;
+ A_STATUS status;
+ A_UINT32 offset;
+ static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)];
+ A_UINT32 length;
+
+ memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count));
+
+ if (bmiDone) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI,
+ ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n",
+ device, rompatch_count));
+
+ cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE;
+
+ offset = 0;
+ A_MEMCPY(&data[offset], &cid, sizeof(cid));
+ offset += sizeof(cid);
+ A_MEMCPY(&data[offset], &rompatch_count, sizeof(rompatch_count));
+ offset += sizeof(rompatch_count);
+ length = rompatch_count * sizeof(*rompatch_list);
+ A_MEMCPY(&data[offset], rompatch_list, length);
+ offset += length;
+ status = bmiBufferSend(device, data, offset);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n"));
+ return A_ERROR;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n"));
+
+ return A_OK;
+}
+
+A_STATUS
+BMIrompatchActivate(HIF_DEVICE *device,
+ A_UINT32 rompatch_count,
+ A_UINT32 *rompatch_list)
+{
+ return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1);
+}
+
+A_STATUS
+BMIrompatchDeactivate(HIF_DEVICE *device,
+ A_UINT32 rompatch_count,
+ A_UINT32 *rompatch_list)
+{
+ return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0);
+}
+
+/* BMI Access routines */
+A_STATUS
+bmiBufferSend(HIF_DEVICE *device,
+ A_UCHAR *buffer,
+ A_UINT32 length)
+{
+ A_STATUS status;
+ A_UINT32 timeout;
+ A_UINT32 address;
+ static A_UINT32 cmdCredits;
+ A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
+
+ HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
+ &mboxAddress, sizeof(mboxAddress));
+
+ cmdCredits = 0;
+ timeout = BMI_COMMUNICATION_TIMEOUT;
+
+ while(timeout-- && !cmdCredits) {
+ /* Read the counter register to get the command credits */
+ address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4;
+ /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause
+ * a decrement, while the remaining 3 bytes has no effect. The rationale behind this is to
+ * make all HIF accesses 4-byte aligned */
+ status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, 4,
+ HIF_RD_SYNC_BYTE_INC, NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n"));
+ return A_ERROR;
+ }
+ /* the counter is only 8=bits, ignore anything in the upper 3 bytes */
+ cmdCredits &= 0xFF;
+ }
+
+ if (cmdCredits) {
+ address = mboxAddress[ENDPOINT1];
+ status = HIFReadWrite(device, address, buffer, length,
+ HIF_WR_SYNC_BYTE_INC, NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n"));
+ return A_ERROR;
+ }
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout\n"));
+ return A_ERROR;
+ }
+
+ return status;
+}
+
+A_STATUS
+bmiBufferReceive(HIF_DEVICE *device,
+ A_UCHAR *buffer,
+ A_UINT32 length)
+{
+ A_STATUS status;
+ A_UINT32 address;
+ A_UINT32 timeout;
+ static A_UINT32 cmdCredits;
+ A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX];
+
+ HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR,
+ &mboxAddress, sizeof(mboxAddress));
+
+ cmdCredits = 0;
+ timeout = BMI_COMMUNICATION_TIMEOUT;
+ while(timeout-- && !cmdCredits) {
+ /* Read the counter register to get the command credits */
+ address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1;
+ /* read the counter using a 4-byte read. Since the counter is NOT auto-decrementing,
+ * we can read this counter multiple times using a non-incrementing address mode.
+ * The rationale here is to make all HIF accesses a multiple of 4 bytes */
+ status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, sizeof(cmdCredits),
+ HIF_RD_SYNC_BYTE_FIX, NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n"));
+ return A_ERROR;
+ }
+ /* we did a 4-byte read to the same count register so mask off upper bytes */
+ cmdCredits &= 0xFF;
+ status = A_ERROR;
+ }
+
+ if (cmdCredits) {
+ address = mboxAddress[ENDPOINT1];
+ status = HIFReadWrite(device, address, buffer, length,
+ HIF_RD_SYNC_BYTE_INC, NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n"));
+ return A_ERROR;
+ }
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Communication timeout\n"));
+ return A_ERROR;
+ }
+
+ return status;
+}
--- /dev/null
+#ifndef BMI_INTERNAL_H
+#define BMI_INTERNAL_H
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "AR6Khwreg.h"
+#include "bmi_msg.h"
+
+#define BMI_COMMUNICATION_TIMEOUT 100000
+
+/* ------ Global Variable Declarations ------- */
+A_BOOL bmiDone;
+
+A_STATUS
+bmiBufferSend(HIF_DEVICE *device,
+ A_UCHAR *buffer,
+ A_UINT32 length);
+
+A_STATUS
+bmiBufferReceive(HIF_DEVICE *device,
+ A_UCHAR *buffer,
+ A_UINT32 length);
+
+#endif
--- /dev/null
+/*
+ * @file: hif.c
+ *
+ * @abstract: HIF layer reference implementation for Atheros SDIO stack
+ *
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "hif_internal.h"
+
+/* ------ Static Variables ------ */
+
+/* ------ Global Variable Declarations ------- */
+SD_PNP_INFO Ids[] = {
+ {
+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xB,
+ .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+ .SDIO_FunctionClass = FUNCTION_CLASS,
+ .SDIO_FunctionNo = 1
+ },
+ {
+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xA,
+ .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+ .SDIO_FunctionClass = FUNCTION_CLASS,
+ .SDIO_FunctionNo = 1
+ },
+ {
+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x9,
+ .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+ .SDIO_FunctionClass = FUNCTION_CLASS,
+ .SDIO_FunctionNo = 1
+ },
+ {
+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x8,
+ .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+ .SDIO_FunctionClass = FUNCTION_CLASS,
+ .SDIO_FunctionNo = 1
+ },
+ {
+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x0,
+ .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+ .SDIO_FunctionClass = FUNCTION_CLASS,
+ .SDIO_FunctionNo = 1
+ },
+ {
+ .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x1,
+ .SDIO_ManufacturerCode = MANUFACTURER_CODE,
+ .SDIO_FunctionClass = FUNCTION_CLASS,
+ .SDIO_FunctionNo = 1
+ },
+ {
+ } //list is null termintaed
+};
+
+TARGET_FUNCTION_CONTEXT FunctionContext = {
+ .function.Version = CT_SDIO_STACK_VERSION_CODE,
+ .function.pName = "sdio_wlan",
+ .function.MaxDevices = 1,
+ .function.NumDevices = 0,
+ .function.pIds = Ids,
+ .function.pProbe = hifDeviceInserted,
+ .function.pRemove = hifDeviceRemoved,
+ .function.pSuspend = NULL,
+ .function.pResume = NULL,
+ .function.pWake = NULL,
+ .function.pContext = &FunctionContext,
+};
+
+HIF_DEVICE hifDevice[HIF_MAX_DEVICES];
+HTC_CALLBACKS htcCallbacks;
+BUS_REQUEST busRequest[BUS_REQUEST_MAX_NUM];
+static BUS_REQUEST *s_busRequestFreeQueue = NULL;
+OS_CRITICALSECTION lock;
+extern A_UINT32 onebitmode;
+extern A_UINT32 busspeedlow;
+
+#ifdef DEBUG
+extern A_UINT32 debughif;
+#define ATH_DEBUG_ERROR 1
+#define ATH_DEBUG_WARN 2
+#define ATH_DEBUG_TRACE 3
+#define _AR_DEBUG_PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(lvl, args)\
+ {if (lvl <= debughif)\
+ A_PRINTF(KERN_ALERT _AR_DEBUG_PRINTX_ARG args);\
+ }
+#else
+#define AR_DEBUG_PRINTF(lvl, args)
+#endif
+
+static BUS_REQUEST *hifAllocateBusRequest(void);
+static void hifFreeBusRequest(BUS_REQUEST *busrequest);
+static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper);
+static void ResetAllCards(void);
+
+/* ------ Functions ------ */
+int HIFInit(HTC_CALLBACKS *callbacks)
+{
+ SDIO_STATUS status;
+ DBG_ASSERT(callbacks != NULL);
+
+ /* Store the callback and event handlers */
+ htcCallbacks.deviceInsertedHandler = callbacks->deviceInsertedHandler;
+ htcCallbacks.deviceRemovedHandler = callbacks->deviceRemovedHandler;
+ htcCallbacks.deviceSuspendHandler = callbacks->deviceSuspendHandler;
+ htcCallbacks.deviceResumeHandler = callbacks->deviceResumeHandler;
+ htcCallbacks.deviceWakeupHandler = callbacks->deviceWakeupHandler;
+ htcCallbacks.rwCompletionHandler = callbacks->rwCompletionHandler;
+ htcCallbacks.dsrHandler = callbacks->dsrHandler;
+
+ CriticalSectionInit(&lock);
+
+ /* Register with bus driver core */
+ status = SDIO_RegisterFunction(&FunctionContext.function);
+ DBG_ASSERT(SDIO_SUCCESS(status));
+
+ return(0);
+}
+
+A_STATUS
+HIFReadWrite(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UCHAR *buffer,
+ A_UINT32 length,
+ A_UINT32 request,
+ void *context)
+{
+ A_UINT8 rw;
+ A_UINT8 mode;
+ A_UINT8 funcNo;
+ A_UINT8 opcode;
+ A_UINT16 count;
+ SDREQUEST *sdrequest;
+ SDIO_STATUS sdiostatus;
+ BUS_REQUEST *busrequest;
+ A_STATUS status = A_OK;
+
+ DBG_ASSERT(device != NULL);
+ DBG_ASSERT(device->handle != NULL);
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+
+ do {
+ busrequest = hifAllocateBusRequest();
+ if (busrequest == NULL) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("HIF Unable to allocate bus request\n"));
+ status = A_NO_RESOURCE;
+ break;
+ }
+
+ sdrequest = busrequest->request;
+ busrequest->context = context;
+
+ sdrequest->pDataBuffer = buffer;
+ if (request & HIF_SYNCHRONOUS) {
+ sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS;
+ sdrequest->pCompleteContext = NULL;
+ sdrequest->pCompletion = NULL;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Synchronous\n"));
+ } else if (request & HIF_ASYNCHRONOUS) {
+ sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS |
+ SDREQ_FLAGS_TRANS_ASYNC;
+ sdrequest->pCompleteContext = busrequest;
+ sdrequest->pCompletion = hifRWCompletionHandler;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Asynchronous\n"));
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Invalid execution mode: 0x%08x\n", request));
+ status = A_EINVAL;
+ break;
+ }
+
+ if (request & HIF_EXTENDED_IO) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Command type: CMD53\n"));
+ sdrequest->Command = CMD53;
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Invalid command type: 0x%08x\n", request));
+ status = A_EINVAL;
+ break;
+ }
+
+ if (request & HIF_BLOCK_BASIS) {
+ mode = CMD53_BLOCK_BASIS;
+ sdrequest->BlockLen = HIF_MBOX_BLOCK_SIZE;
+ sdrequest->BlockCount = length / HIF_MBOX_BLOCK_SIZE;
+ count = sdrequest->BlockCount;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("Block mode (BlockLen: %d, BlockCount: %d)\n",
+ sdrequest->BlockLen, sdrequest->BlockCount));
+ } else if (request & HIF_BYTE_BASIS) {
+ mode = CMD53_BYTE_BASIS;
+ sdrequest->BlockLen = length;
+ sdrequest->BlockCount = 1;
+ count = sdrequest->BlockLen;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("Byte mode (BlockLen: %d, BlockCount: %d)\n",
+ sdrequest->BlockLen, sdrequest->BlockCount));
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Invalid data mode: 0x%08x\n", request));
+ status = A_EINVAL;
+ break;
+ }
+
+#if 0
+ /* useful for checking register accesses */
+ if (length & 0x3) {
+ A_PRINTF(KERN_ALERT"HIF (%s) is not a multiple of 4 bytes, addr:0x%X, len:%d\n",
+ request & HIF_WRITE ? "write":"read", address, length);
+ }
+#endif
+
+ if ((address >= HIF_MBOX_START_ADDR(0)) &&
+ (address <= HIF_MBOX_END_ADDR(3)))
+ {
+
+ DBG_ASSERT(length <= HIF_MBOX_WIDTH);
+
+ /*
+ * Mailbox write. Adjust the address so that the last byte
+ * falls on the EOM address.
+ */
+ address += (HIF_MBOX_WIDTH - length);
+ }
+
+
+
+ if (request & HIF_WRITE) {
+ rw = CMD53_WRITE;
+ sdrequest->Flags |= SDREQ_FLAGS_DATA_WRITE;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Write\n"));
+ } else if (request & HIF_READ) {
+ rw = CMD53_READ;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Read\n"));
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Invalid direction: 0x%08x\n", request));
+ status = A_EINVAL;
+ break;
+ }
+
+ if (request & HIF_FIXED_ADDRESS) {
+ opcode = CMD53_FIXED_ADDRESS;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Fixed\n"));
+ } else if (request & HIF_INCREMENTAL_ADDRESS) {
+ opcode = CMD53_INCR_ADDRESS;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Incremental\n"));
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Invalid address mode: 0x%08x\n", request));
+ status = A_EINVAL;
+ break;
+ }
+
+ funcNo = SDDEVICE_GET_SDIO_FUNCNO(device->handle);
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Function number: %d\n", funcNo));
+ SDIO_SET_CMD53_ARG(sdrequest->Argument, rw, funcNo,
+ mode, opcode, address, count);
+
+ /* Send the command out */
+ sdiostatus = SDDEVICE_CALL_REQUEST_FUNC(device->handle, sdrequest);
+
+ if (!SDIO_SUCCESS(sdiostatus)) {
+ status = A_ERROR;
+ }
+
+ } while (FALSE);
+
+ if (A_FAILED(status) || (request & HIF_SYNCHRONOUS)) {
+ if (busrequest != NULL) {
+ hifFreeBusRequest(busrequest);
+ }
+ }
+
+ if (A_FAILED(status) && (request & HIF_ASYNCHRONOUS)) {
+ /* call back async handler on failure */
+ htcCallbacks.rwCompletionHandler(context, status);
+ }
+
+ return status;
+}
+
+A_STATUS
+HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
+ void *config, A_UINT32 configLen)
+{
+ A_UINT32 count;
+
+ switch(opcode) {
+ case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
+ ((A_UINT32 *)config)[0] = HIF_MBOX0_BLOCK_SIZE;
+ ((A_UINT32 *)config)[1] = HIF_MBOX1_BLOCK_SIZE;
+ ((A_UINT32 *)config)[2] = HIF_MBOX2_BLOCK_SIZE;
+ ((A_UINT32 *)config)[3] = HIF_MBOX3_BLOCK_SIZE;
+ break;
+
+ case HIF_DEVICE_GET_MBOX_ADDR:
+ for (count = 0; count < 4; count ++) {
+ ((A_UINT32 *)config)[count] = HIF_MBOX_START_ADDR(count);
+ }
+ break;
+ case HIF_DEVICE_GET_IRQ_PROC_MODE:
+ /* the SDIO stack allows the interrupts to be processed either way, ASYNC or SYNC */
+ *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = HIF_DEVICE_IRQ_ASYNC_SYNC;
+ break;
+ default:
+ AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
+ ("Unsupported configuration opcode: %d\n", opcode));
+ return A_ERROR;
+ }
+
+ return A_OK;
+}
+
+void
+HIFShutDownDevice(HIF_DEVICE *device)
+{
+ A_UINT8 data;
+ A_UINT32 count;
+ SDIO_STATUS status;
+ SDCONFIG_BUS_MODE_DATA busSettings;
+ SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
+
+ if (device != NULL) {
+ DBG_ASSERT(device->handle != NULL);
+
+ /* Remove the allocated current if any */
+ status = SDLIB_IssueConfig(device->handle,
+ SDCONFIG_FUNC_FREE_SLOT_CURRENT, NULL, 0);
+ DBG_ASSERT(SDIO_SUCCESS(status));
+
+ /* Disable the card */
+ fData.EnableFlags = SDCONFIG_DISABLE_FUNC;
+ fData.TimeOut = 1;
+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ENABLE_DISABLE,
+ &fData, sizeof(fData));
+ DBG_ASSERT(SDIO_SUCCESS(status));
+
+ /* Perform a soft I/O reset */
+ data = SDIO_IO_RESET;
+ status = SDLIB_IssueCMD52(device->handle, 0, SDIO_IO_ABORT_REG,
+ &data, 1, 1);
+ DBG_ASSERT(SDIO_SUCCESS(status));
+
+ /*
+ * WAR - Codetelligence driver does not seem to shutdown correctly in 1
+ * bit mode. By default it configures the HC in the 4 bit. Its later in
+ * our driver that we switch to 1 bit mode. If we try to shutdown, the
+ * driver hangs so we revert to 4 bit mode, to be transparent to the
+ * underlying bus driver.
+ */
+ if (onebitmode) {
+ ZERO_OBJECT(busSettings);
+ busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(device->handle);
+ SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
+ SDCONFIG_BUS_WIDTH_4_BIT);
+
+ /* Issue config request to change the bus width to 4 bit */
+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_BUS_MODE_CTRL,
+ &busSettings,
+ sizeof(SDCONFIG_BUS_MODE_DATA));
+ DBG_ASSERT(SDIO_SUCCESS(status));
+ }
+
+ /* Free the bus requests */
+ for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
+ SDDeviceFreeRequest(device->handle, busRequest[count].request);
+ }
+ /* Clean up the queue */
+ s_busRequestFreeQueue = NULL;
+ } else {
+ /* since we are unloading the driver anyways, reset all cards in case the SDIO card
+ * is externally powered and we are unloading the SDIO stack. This avoids the problem when
+ * the SDIO stack is reloaded and attempts are made to re-enumerate a card that is already
+ * enumerated */
+ ResetAllCards();
+ /* Unregister with bus driver core */
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("Unregistering with the bus driver\n"));
+ status = SDIO_UnregisterFunction(&FunctionContext.function);
+ DBG_ASSERT(SDIO_SUCCESS(status));
+ }
+}
+
+void
+hifRWCompletionHandler(SDREQUEST *request)
+{
+ A_STATUS status;
+ void *context;
+ BUS_REQUEST *busrequest;
+
+ if (SDIO_SUCCESS(request->Status)) {
+ status = A_OK;
+ } else {
+ status = A_ERROR;
+ }
+
+ DBG_ASSERT(status == A_OK);
+ busrequest = (BUS_REQUEST *) request->pCompleteContext;
+ context = (void *) busrequest->context;
+ /* free the request before calling the callback, in case the
+ * callback submits another request, this guarantees that
+ * there is at least 1 free request available everytime the callback
+ * is invoked */
+ hifFreeBusRequest(busrequest);
+ htcCallbacks.rwCompletionHandler(context, status);
+}
+
+void
+hifIRQHandler(void *context)
+{
+ A_STATUS status;
+ HIF_DEVICE *device;
+
+ device = (HIF_DEVICE *)context;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+ status = htcCallbacks.dsrHandler(device->htc_handle);
+ DBG_ASSERT(status == A_OK);
+}
+
+BOOL
+hifDeviceInserted(SDFUNCTION *function, SDDEVICE *handle)
+{
+ BOOL enabled;
+ A_UINT8 data;
+ A_UINT32 count;
+ HIF_DEVICE *device;
+ SDIO_STATUS status;
+ A_UINT16 maxBlocks;
+ A_UINT16 maxBlockSize;
+ SDCONFIG_BUS_MODE_DATA busSettings;
+ SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData;
+ TARGET_FUNCTION_CONTEXT *functionContext;
+ SDCONFIG_FUNC_SLOT_CURRENT_DATA slotCurrent;
+ SD_BUSCLOCK_RATE currentBusClock;
+
+ DBG_ASSERT(function != NULL);
+ DBG_ASSERT(handle != NULL);
+
+ device = addHifDevice(handle);
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device));
+ functionContext = (TARGET_FUNCTION_CONTEXT *)function->pContext;
+
+ /*
+ * Issue commands to get the manufacturer ID and stuff and compare it
+ * against the rev Id derived from the ID registered during the
+ * initialization process. Report the device only in the case there
+ * is a match. In the case od SDIO, the bus driver has already queried
+ * these details so we just need to use their data structures to get the
+ * relevant values. Infact, the driver has already matched it against
+ * the Ids that we registered with it so we dont need to the step here.
+ */
+
+ /* Configure the SDIO Bus Width */
+ if (onebitmode) {
+ data = SDIO_BUS_WIDTH_1_BIT;
+ status = SDLIB_IssueCMD52(handle, 0, SDIO_BUS_IF_REG, &data, 1, 1);
+ if (!SDIO_SUCCESS(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Unable to set the bus width to 1 bit\n"));
+ return FALSE;
+ }
+ }
+
+ /* Get current bus flags */
+ ZERO_OBJECT(busSettings);
+
+ busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(handle);
+ if (onebitmode) {
+ SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags,
+ SDCONFIG_BUS_WIDTH_1_BIT);
+ }
+
+ /* get the current operating clock, the bus driver sets us up based
+ * on what our CIS reports and what the host controller can handle
+ * we can use this to determine whether we want to drop our clock rate
+ * down */
+ currentBusClock = SDDEVICE_GET_OPER_CLOCK(handle);
+ busSettings.ClockRate = currentBusClock;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("HIF currently running at: %d \n",currentBusClock));
+
+ /* see if HIF wants to run at a lower clock speed, we may already be
+ * at that lower clock speed */
+ if (currentBusClock > (SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow)) {
+ busSettings.ClockRate = SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow;
+ AR_DEBUG_PRINTF(ATH_DEBUG_WARN,
+ ("HIF overriding clock to %d \n",busSettings.ClockRate));
+ }
+
+ /* Issue config request to override clock rate */
+ status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_CHANGE_BUS_MODE, &busSettings,
+ sizeof(SDCONFIG_BUS_MODE_DATA));
+ if (!SDIO_SUCCESS(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Unable to configure the host clock\n"));
+ return FALSE;
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("Configured clock: %d, Maximum clock: %d\n",
+ busSettings.ActualClockRate,
+ SDDEVICE_GET_MAX_CLOCK(handle)));
+ }
+
+ /*
+ * Check if the target supports block mode. This result of this check
+ * can be used to implement the HIFReadWrite API.
+ */
+ if (SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)) {
+ /* Limit block size to operational block limit or card function
+ capability */
+ maxBlockSize = min(SDDEVICE_GET_OPER_BLOCK_LEN(handle),
+ SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle));
+
+ /* check if the card support multi-block transfers */
+ if (!(SDDEVICE_GET_SDIOCARD_CAPS(handle) & SDIO_CAPS_MULTI_BLOCK)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Byte basis only\n"));
+
+ /* Limit block size to max byte basis */
+ maxBlockSize = min(maxBlockSize,
+ (A_UINT16)SDIO_MAX_LENGTH_BYTE_BASIS);
+ maxBlocks = 1;
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Multi-block capable\n"));
+ maxBlocks = SDDEVICE_GET_OPER_BLOCKS(handle);
+ status = SDLIB_SetFunctionBlockSize(handle, HIF_MBOX_BLOCK_SIZE);
+ if (!SDIO_SUCCESS(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Failed to set block size. Err:%d\n", status));
+ return FALSE;
+ }
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("Bytes Per Block: %d bytes, Block Count:%d \n",
+ maxBlockSize, maxBlocks));
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Function does not support Block Mode!\n"));
+ return FALSE;
+ }
+
+ /* Allocate the slot current */
+ status = SDLIB_GetDefaultOpCurrent(handle, &slotCurrent.SlotCurrent);
+ if (SDIO_SUCCESS(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Allocating Slot current: %d mA\n",
+ slotCurrent.SlotCurrent));
+ status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ALLOC_SLOT_CURRENT,
+ &slotCurrent, sizeof(slotCurrent));
+ if (!SDIO_SUCCESS(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Failed to allocate slot current %d\n", status));
+ return FALSE;
+ }
+ }
+
+ /* Enable the dragon function */
+ count = 0;
+ enabled = FALSE;
+ fData.TimeOut = 1;
+ fData.EnableFlags = SDCONFIG_ENABLE_FUNC;
+ while ((count++ < SDWLAN_ENABLE_DISABLE_TIMEOUT) && !enabled)
+ {
+ /* Enable dragon */
+ status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ENABLE_DISABLE,
+ &fData, sizeof(fData));
+ if (!SDIO_SUCCESS(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("Attempting to enable the card again\n"));
+ continue;
+ }
+
+ /* Mark the status as enabled */
+ enabled = TRUE;
+ }
+
+ /* Check if we were succesful in enabling the target */
+ if (!enabled) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
+ ("Failed to communicate with the target\n"));
+ return FALSE;
+ }
+
+ /* Allocate the bus requests to be used later */
+ A_MEMZERO(busRequest, sizeof(busRequest));
+ for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) {
+ if ((busRequest[count].request = SDDeviceAllocRequest(handle)) == NULL){
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("Unable to allocate memory\n"));
+ /* TODO: Free the memory that has already been allocated */
+ return FALSE;
+ }
+ hifFreeBusRequest(&busRequest[count]);
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("0x%08x = busRequest[%d].request = 0x%08x\n",
+ (unsigned int) &busRequest[count], count,
+ (unsigned int) busRequest[count].request));
+ }
+
+ /* Schedule a worker to handle device inserted, this is a temporary workaround
+ * to fix a deadlock if the device fails to intialize in the insertion handler
+ * The failure causes the instance to shutdown the HIF layer and unregister the
+ * function driver within the busdriver probe context which can deadlock
+ *
+ * NOTE: we cannot use the default work queue because that would block
+ * SD bus request processing for all synchronous I/O. We must use a kernel
+ * thread that is creating using the helper library.
+ * */
+
+ if (SDIO_SUCCESS(SDLIB_OSCreateHelper(&device->insert_helper,
+ insert_helper_func,
+ device))) {
+ device->helper_started = TRUE;
+ }
+
+ return TRUE;
+}
+
+static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper)
+{
+
+ /*
+ * Adding a wait of around a second before we issue the very first
+ * command to dragon. During the process of loading/unloading the
+ * driver repeatedly it was observed that we get a data timeout
+ * while accessing function 1 registers in the chip. The theory at
+ * this point is that some initialization delay in dragon is
+ * causing the SDIO state in dragon core to be not ready even after
+ * the ready bit indicates that function 1 is ready. Accomodating
+ * for this behavior by adding some delay in the driver before it
+ * issues the first command after switching on dragon. Need to
+ * investigate this a bit more - TODO
+ */
+
+ A_MDELAY(1000);
+ /* Inform HTC */
+ if ((htcCallbacks.deviceInsertedHandler(SD_GET_OS_HELPER_CONTEXT(pHelper))) != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device rejected\n"));
+ }
+
+ return 0;
+}
+
+void
+HIFAckInterrupt(HIF_DEVICE *device)
+{
+ SDIO_STATUS status;
+ DBG_ASSERT(device != NULL);
+ DBG_ASSERT(device->handle != NULL);
+
+ /* Acknowledge our function IRQ */
+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ACK_IRQ,
+ NULL, 0);
+ DBG_ASSERT(SDIO_SUCCESS(status));
+}
+
+void
+HIFUnMaskInterrupt(HIF_DEVICE *device)
+{
+ SDIO_STATUS status;
+
+ DBG_ASSERT(device != NULL);
+ DBG_ASSERT(device->handle != NULL);
+
+ /* Register the IRQ Handler */
+ SDDEVICE_SET_IRQ_HANDLER(device->handle, hifIRQHandler, device);
+
+ /* Unmask our function IRQ */
+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_UNMASK_IRQ,
+ NULL, 0);
+ DBG_ASSERT(SDIO_SUCCESS(status));
+}
+
+void HIFMaskInterrupt(HIF_DEVICE *device)
+{
+ SDIO_STATUS status;
+ DBG_ASSERT(device != NULL);
+ DBG_ASSERT(device->handle != NULL);
+
+ /* Mask our function IRQ */
+ status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_MASK_IRQ,
+ NULL, 0);
+ DBG_ASSERT(SDIO_SUCCESS(status));
+
+ /* Unregister the IRQ Handler */
+ SDDEVICE_SET_IRQ_HANDLER(device->handle, NULL, NULL);
+}
+
+static BUS_REQUEST *hifAllocateBusRequest(void)
+{
+ BUS_REQUEST *busrequest;
+
+ /* Acquire lock */
+ CriticalSectionAcquire(&lock);
+
+ /* Remove first in list */
+ if((busrequest = s_busRequestFreeQueue) != NULL)
+ {
+ s_busRequestFreeQueue = busrequest->next;
+ }
+
+ /* Release lock */
+ CriticalSectionRelease(&lock);
+
+ return busrequest;
+}
+
+static void
+hifFreeBusRequest(BUS_REQUEST *busrequest)
+{
+ DBG_ASSERT(busrequest != NULL);
+
+ /* Acquire lock */
+ CriticalSectionAcquire(&lock);
+
+ /* Insert first in list */
+ busrequest->next = s_busRequestFreeQueue;
+ s_busRequestFreeQueue = busrequest;
+
+ /* Release lock */
+ CriticalSectionRelease(&lock);
+}
+
+void
+hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *handle)
+{
+ A_STATUS status;
+ HIF_DEVICE *device;
+ DBG_ASSERT(function != NULL);
+ DBG_ASSERT(handle != NULL);
+
+ device = getHifDevice(handle);
+ status = htcCallbacks.deviceRemovedHandler(device->htc_handle, A_OK);
+
+ /* cleanup the helper thread */
+ if (device->helper_started) {
+ SDLIB_OSDeleteHelper(&device->insert_helper);
+ device->helper_started = FALSE;
+ }
+
+ delHifDevice(handle);
+ DBG_ASSERT(status == A_OK);
+}
+
+HIF_DEVICE *
+addHifDevice(SDDEVICE *handle)
+{
+ DBG_ASSERT(handle != NULL);
+ hifDevice[0].handle = handle;
+ return &hifDevice[0];
+}
+
+HIF_DEVICE *
+getHifDevice(SDDEVICE *handle)
+{
+ DBG_ASSERT(handle != NULL);
+ return &hifDevice[0];
+}
+
+void
+delHifDevice(SDDEVICE *handle)
+{
+ DBG_ASSERT(handle != NULL);
+ hifDevice[0].handle = NULL;
+}
+
+struct device*
+HIFGetOSDevice(HIF_DEVICE *device)
+{
+ return &device->handle->Device->dev;
+}
+
+static void ResetAllCards(void)
+{
+ UINT8 data;
+ SDIO_STATUS status;
+ int i;
+
+ data = SDIO_IO_RESET;
+
+ /* set the I/O CARD reset bit:
+ * NOTE: we are exploiting a "feature" of the SDIO core that resets the core when you
+ * set the RES bit in the SDIO_IO_ABORT register. This bit however "normally" resets the
+ * I/O functions leaving the SDIO core in the same state (as per SDIO spec).
+ * In this design, this reset can be used to reset the SDIO core itself */
+ for (i = 0; i < HIF_MAX_DEVICES; i++) {
+ if (hifDevice[i].handle != NULL) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
+ ("Issuing I/O Card reset for instance: %d \n",i));
+ /* set the I/O Card reset bit */
+ status = SDLIB_IssueCMD52(hifDevice[i].handle,
+ 0, /* function 0 space */
+ SDIO_IO_ABORT_REG,
+ &data,
+ 1, /* 1 byte */
+ TRUE); /* write */
+ }
+ }
+
+}
+
+void HIFSetHandle(void *hif_handle, void *handle)
+{
+ HIF_DEVICE *device = (HIF_DEVICE *) hif_handle;
+
+ device->htc_handle = handle;
+
+ return;
+}
--- /dev/null
+/*
+ * hif2.c - HIF layer re-implementation for the Linux SDIO stack
+ *
+ * Copyright (C) 2008, 2009 by OpenMoko, Inc.
+ * Written by Werner Almesberger <werner@openmoko.org>
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Based on:
+ *
+ * @abstract: HIF layer reference implementation for Atheros SDIO stack
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/sdio_ids.h>
+
+#include "athdefs.h"
+#include "a_types.h"
+#include "hif.h"
+
+
+/* @@@ Hack - this wants cleaning up */
+
+#ifdef CONFIG_MACH_NEO1973_GTA02
+
+#include <mach/gta02-pm-wlan.h>
+
+#else /* CONFIG_MACH_NEO1973_GTA02 */
+
+#define gta02_wlan_query_rfkill_lock() 1
+#define gta02_wlan_set_rfkill_cb(cb, hif) ((void) cb)
+#define gta02_wlan_query_rfkill_unlock()
+#define gta02_wlan_clear_rfkill_cb()
+
+#endif /* !CONFIG_MACH_NEO1973_GTA02 */
+
+
+/*
+ * KNOWN BUGS:
+ *
+ * - HIF_DEVICE_IRQ_ASYNC_SYNC doesn't work yet (gets MMC errors)
+ * - latency can reach hundreds of ms, probably because of scheduling delays
+ * - packets go through about three queues before finally hitting the network
+ */
+
+/*
+ * Differences from Atheros' HIFs:
+ *
+ * - synchronous and asynchronous requests may get reordered with respect to
+ * each other, e.g., if HIFReadWrite returns for an asynchronous request and
+ * then HIFReadWrite is called for a synchronous request, the synchronous
+ * request may be executed before the asynchronous request.
+ *
+ * - request queue locking seems unnecessarily complex in the Atheros HIFs.
+ *
+ * - Atheros mask interrupts by calling sdio_claim_irq/sdio_release_irq, which
+ * can cause quite a bit of overhead. This HIF has its own light-weight
+ * interrupt masking.
+ *
+ * - Atheros call deviceInsertedHandler from a thread spawned off the probe or
+ * device insertion function. The original explanation for the Atheros SDIO
+ * stack said that this is done because a delay is needed to let the chip
+ * complete initialization. There is indeed a one second delay in the thread.
+ *
+ * The Atheros Linux SDIO HIF removes the delay and only retains the thread.
+ * Experimentally removing the thread didn't show any conflicts, so let's get
+ * rid of it for good.
+ *
+ * - The Atheros SDIO stack with Samuel's driver sets SDIO_CCCR_POWER in
+ * SDIO_POWER_EMPC. Atheros' Linux SDIO code apparently doesn't. We don't
+ * either, and this seems to work fine.
+ * @@@ Need to check this with Atheros.
+ */
+
+
+#define MBOXES 4
+
+#define HIF_MBOX_BLOCK_SIZE 128
+#define HIF_MBOX_BASE_ADDR 0x800
+#define HIF_MBOX_WIDTH 0x800
+#define HIF_MBOX_START_ADDR(mbox) \
+ (HIF_MBOX_BASE_ADDR+(mbox)*HIF_MBOX_WIDTH)
+
+
+struct hif_device {
+ void *htc_handle;
+ struct sdio_func *func;
+
+ /*
+ * @@@ our sweet little bit of bogosity - the mechanism that lets us
+ * use the SDIO stack from softirqs. This really wants to use skbs.
+ */
+ struct list_head queue;
+ spinlock_t queue_lock;
+ struct task_struct *io_task;
+ wait_queue_head_t wait;
+
+ /*
+ * activate_lock protects "active" and the activation/deactivation
+ * process itself.
+ *
+ * Relation to other locks: The SDIO function can be claimed while
+ * activate_lock is being held, but trying to acquire activate_lock
+ * while having ownership of the SDIO function could cause a deadlock.
+ */
+ int active;
+ struct mutex activate_lock;
+};
+
+struct hif_request {
+ struct list_head list;
+ struct sdio_func *func;
+ int (*read)(struct sdio_func *func,
+ void *dst, unsigned int addr, int count);
+ int (*write)(struct sdio_func *func,
+ unsigned int addr, void *src, int count);
+ void *buf;
+ unsigned long addr;
+ int len;
+ A_STATUS (*completion)(void *context, A_STATUS status);
+ void *context;
+};
+
+
+static HTC_CALLBACKS htcCallbacks;
+
+/*
+ * shutdown_lock prevents recursion through HIFShutDownDevice
+ */
+static DEFINE_MUTEX(shutdown_lock);
+
+
+/* ----- Request processing ------------------------------------------------ */
+
+
+static A_STATUS process_request(struct hif_request *req)
+{
+ int ret;
+ A_STATUS status;
+
+ dev_dbg(&req->func->dev, "process_request(req %p)\n", req);
+ sdio_claim_host(req->func);
+ if (req->read) {
+ ret = req->read(req->func, req->buf, req->addr, req->len);
+ } else {
+ ret = req->write(req->func, req->addr, req->buf, req->len);
+ }
+ sdio_release_host(req->func);
+ status = ret ? A_ERROR : A_OK;
+ if (req->completion)
+ req->completion(req->context, status);
+ kfree(req);
+ return status;
+}
+
+
+static void enqueue_request(struct hif_device *hif, struct hif_request *req)
+{
+ unsigned long flags;
+
+ dev_dbg(&req->func->dev, "enqueue_request(req %p)\n", req);
+ spin_lock_irqsave(&hif->queue_lock, flags);
+ list_add_tail(&req->list, &hif->queue);
+ spin_unlock_irqrestore(&hif->queue_lock, flags);
+ wake_up(&hif->wait);
+}
+
+
+static struct hif_request *dequeue_request(struct hif_device *hif)
+{
+ struct hif_request *req;
+ unsigned long flags;
+
+ spin_lock_irqsave(&hif->queue_lock, flags);
+ if (list_empty(&hif->queue))
+ req = NULL;
+ else {
+ req = list_first_entry(&hif->queue,
+ struct hif_request, list);
+ list_del(&req->list);
+ }
+ spin_unlock_irqrestore(&hif->queue_lock, flags);
+ return req;
+}
+
+
+static void wait_queue_empty(struct hif_device *hif)
+{
+ unsigned long flags;
+ int empty;
+
+ while (1) {
+ spin_lock_irqsave(&hif->queue_lock, flags);
+ empty = list_empty(&hif->queue);
+ spin_unlock_irqrestore(&hif->queue_lock, flags);
+ if (empty)
+ break;
+ else
+ yield();
+ }
+}
+
+
+static int io(void *data)
+{
+ struct hif_device *hif = data;
+ struct sched_param param = { .sched_priority = 2 };
+ /* one priority level slower than ksdioirqd (which is at 1) */
+ DEFINE_WAIT(wait);
+ struct hif_request *req;
+
+ sched_setscheduler(current, SCHED_FIFO, ¶m);
+
+ while (1) {
+ while (1) {
+ /*
+ * Since we never use signals here, one might think
+ * that this ought to be TASK_UNINTERRUPTIBLE. However,
+ * such a task would increase the load average and,
+ * worse, it would trigger the softlockup check.
+ */
+ prepare_to_wait(&hif->wait, &wait, TASK_INTERRUPTIBLE);
+ if (kthread_should_stop()) {
+ finish_wait(&hif->wait, &wait);
+ return 0;
+ }
+ req = dequeue_request(hif);
+ if (req)
+ break;
+ schedule();
+ }
+ finish_wait(&hif->wait, &wait);
+
+ (void) process_request(req);
+ }
+ return 0;
+}
+
+
+A_STATUS HIFReadWrite(HIF_DEVICE *hif, A_UINT32 address, A_UCHAR *buffer,
+ A_UINT32 length, A_UINT32 request, void *context)
+{
+ struct device *dev = HIFGetOSDevice(hif);
+ struct hif_request *req;
+
+ dev_dbg(dev, "HIFReadWrite(device %p, address 0x%x, buffer %p, "
+ "length %d, request 0x%x, context %p)\n",
+ hif, address, buffer, length, request, context);
+
+ BUG_ON(!(request & (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)));
+ BUG_ON(!(request & (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)));
+ BUG_ON(!(request & (HIF_READ | HIF_WRITE)));
+ BUG_ON(!(request & HIF_EXTENDED_IO));
+
+ if (address >= HIF_MBOX_START_ADDR(0) &&
+ address < HIF_MBOX_START_ADDR(MBOXES+1)) {
+ BUG_ON(length > HIF_MBOX_WIDTH);
+ /* Adjust the address so that the last byte falls on the EOM
+ address. */
+ address += HIF_MBOX_WIDTH-length;
+ }
+
+ req = kzalloc(sizeof(*req), GFP_ATOMIC);
+ if (!req) {
+ if (request & HIF_ASYNCHRONOUS)
+ htcCallbacks.rwCompletionHandler(context, A_ERROR);
+ return A_ERROR;
+ }
+
+ req->func = hif->func;
+ req->addr = address;
+ req->buf = buffer;
+ req->len = length;
+
+ if (request & HIF_READ) {
+ if (request & HIF_FIXED_ADDRESS)
+ req->read = sdio_readsb;
+ else
+ req->read = sdio_memcpy_fromio;
+ } else {
+ if (request & HIF_FIXED_ADDRESS)
+ req->write = sdio_writesb;
+ else
+ req->write = sdio_memcpy_toio;
+ }
+
+ if (!(request & HIF_ASYNCHRONOUS))
+ return process_request(req);
+
+ req->completion = htcCallbacks.rwCompletionHandler;
+ req->context = context;
+ enqueue_request(hif, req);
+
+ return A_OK;
+}
+
+
+/* ----- Interrupt handling ------------------------------------------------ */
+
+/*
+ * Volatile ought to be good enough to make gcc do the right thing on S3C24xx.
+ * No need to use atomic or put barriers, keeping the code more readable.
+ *
+ * Warning: this story changes if going SMP/SMT.
+ */
+
+static volatile int masked = 1;
+static volatile int pending;
+static volatile int in_interrupt;
+
+
+static void ar6000_do_irq(struct sdio_func *func)
+{
+ HIF_DEVICE *hif = sdio_get_drvdata(func);
+ struct device *dev = HIFGetOSDevice(hif);
+ A_STATUS status;
+
+ dev_dbg(dev, "ar6000_do_irq -> %p\n", htcCallbacks.dsrHandler);
+
+ status = htcCallbacks.dsrHandler(hif->htc_handle);
+ BUG_ON(status != A_OK);
+}
+
+
+static void sdio_ar6000_irq(struct sdio_func *func)
+{
+ HIF_DEVICE *hif = sdio_get_drvdata(func);
+ struct device *dev = HIFGetOSDevice(hif);
+
+ dev_dbg(dev, "sdio_ar6000_irq\n");
+
+ in_interrupt = 1;
+ if (masked) {
+ in_interrupt = 0;
+ pending++;
+ return;
+ }
+ /*
+ * @@@ This is ugly. If we don't drop the lock, we'll deadlock when
+ * the handler tries to do SDIO. So there are four choices:
+ *
+ * 1) Break the call chain by calling the callback from a workqueue.
+ * Ugh.
+ * 2) Make process_request aware that we already have the lock.
+ * 3) Drop the lock. Which is ugly but should be safe as long as we're
+ * making sure the device doesn't go away.
+ * 4) Change the AR6k driver such that it only issues asynchronous
+ * quests when called from an interrupt.
+ *
+ * Solution 2) is probably the best for now. Will try it later.
+ */
+ sdio_release_host(func);
+ ar6000_do_irq(func);
+ sdio_claim_host(func);
+ in_interrupt = 0;
+}
+
+
+void HIFAckInterrupt(HIF_DEVICE *hif)
+{
+ struct device *dev = HIFGetOSDevice(hif);
+
+ dev_dbg(dev, "HIFAckInterrupt\n");
+ /* do nothing */
+}
+
+
+void HIFUnMaskInterrupt(HIF_DEVICE *hif)
+{
+ struct device *dev = HIFGetOSDevice(hif);
+
+ dev_dbg(dev, "HIFUnMaskInterrupt\n");
+ do {
+ masked = 1;
+ if (pending) {
+ pending = 0;
+ ar6000_do_irq(hif->func);
+ /* We may take an interrupt before unmasking and thus
+ get it pending. In this case, we just loop back. */
+ }
+ masked = 0;
+ }
+ while (pending);
+}
+
+
+void HIFMaskInterrupt(HIF_DEVICE *hif)
+{
+ struct device *dev = HIFGetOSDevice(hif);
+
+ dev_dbg(dev, "HIFMaskInterrupt\n");
+ /*
+ * Since sdio_ar6000_irq can also be called from a process context, we
+ * may conceivably end up racing with it. Thus, we need to wait until
+ * we can be sure that no concurrent interrupt processing is going on
+ * before we return.
+ *
+ * Note: this may be a bit on the paranoid side - the callers may
+ * actually be nice enough to disable scheduling. Check later.
+ */
+ masked = 1;
+ while (in_interrupt)
+ yield();
+}
+
+
+/* ----- HIF API glue functions -------------------------------------------- */
+
+
+struct device *HIFGetOSDevice(HIF_DEVICE *hif)
+{
+ return &hif->func->dev;
+}
+
+
+void HIFSetHandle(void *hif_handle, void *handle)
+{
+ HIF_DEVICE *hif = (HIF_DEVICE *) hif_handle;
+
+ hif->htc_handle = handle;
+}
+
+
+/* ----- Device configuration (HIF side) ----------------------------------- */
+
+
+A_STATUS HIFConfigureDevice(HIF_DEVICE *hif,
+ HIF_DEVICE_CONFIG_OPCODE opcode, void *config, A_UINT32 configLen)
+{
+ struct device *dev = HIFGetOSDevice(hif);
+ HIF_DEVICE_IRQ_PROCESSING_MODE *ipm_cfg = config;
+ A_UINT32 *mbs_cfg = config;
+ int i;
+
+ dev_dbg(dev, "HIFConfigureDevice\n");
+
+ switch (opcode) {
+ case HIF_DEVICE_GET_MBOX_BLOCK_SIZE:
+ for (i = 0; i != MBOXES; i++)
+ mbs_cfg[i] = HIF_MBOX_BLOCK_SIZE;
+ break;
+ case HIF_DEVICE_GET_MBOX_ADDR:
+ for (i = 0; i != MBOXES; i++)
+ mbs_cfg[i] = HIF_MBOX_START_ADDR(i);
+ break;
+ case HIF_DEVICE_GET_IRQ_PROC_MODE:
+ *ipm_cfg = HIF_DEVICE_IRQ_SYNC_ONLY;
+// *ipm_cfg = HIF_DEVICE_IRQ_ASYNC_SYNC;
+ break;
+ default:
+ return A_ERROR;
+ }
+ return A_OK;
+}
+
+
+/* ----- Device probe and removal (Linux side) ----------------------------- */
+
+
+static int ar6000_do_activate(struct hif_device *hif)
+{
+ struct sdio_func *func = hif->func;
+ struct device *dev = &func->dev;
+ int ret;
+
+ dev_dbg(dev, "ar6000_do_activate\n");
+
+ sdio_claim_host(func);
+ sdio_enable_func(func);
+
+ INIT_LIST_HEAD(&hif->queue);
+ init_waitqueue_head(&hif->wait);
+ spin_lock_init(&hif->queue_lock);
+
+ ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE);
+ if (ret < 0) {
+ dev_err(dev, "sdio_set_block_size returns %d\n", ret);
+ goto out_enabled;
+ }
+ ret = sdio_claim_irq(func, sdio_ar6000_irq);
+ if (ret) {
+ dev_err(dev, "sdio_claim_irq returns %d\n", ret);
+ goto out_enabled;
+ }
+ /* Set SDIO_BUS_CD_DISABLE in SDIO_CCCR_IF ? */
+#if 0
+ sdio_f0_writeb(func, SDIO_CCCR_CAP_E4MI, SDIO_CCCR_CAPS, &ret);
+ if (ret) {
+ dev_err(dev, "sdio_f0_writeb(SDIO_CCCR_CAPS) returns %d\n",
+ ret);
+ goto out_got_irq;
+ }
+#else
+ if (0) /* avoid warning */
+ goto out_got_irq;
+#endif
+
+ sdio_release_host(func);
+
+ hif->io_task = kthread_run(io, hif, "ar6000_io");
+ ret = IS_ERR(hif->io_task);
+ if (ret) {
+ dev_err(dev, "kthread_run(ar6000_io): %d\n", ret);
+ goto out_func_ready;
+ }
+
+ ret = htcCallbacks.deviceInsertedHandler(hif);
+ if (ret == A_OK)
+ return 0;
+
+ dev_err(dev, "deviceInsertedHandler: %d\n", ret);
+
+ ret = kthread_stop(hif->io_task);
+ if (ret)
+ dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
+
+out_func_ready:
+ sdio_claim_host(func);
+
+out_got_irq:
+ sdio_release_irq(func);
+
+out_enabled:
+ sdio_disable_func(func);
+ sdio_release_host(func);
+
+ return ret;
+}
+
+
+static void ar6000_do_deactivate(struct hif_device *hif)
+{
+ struct sdio_func *func = hif->func;
+ struct device *dev = &func->dev;
+ int ret;
+
+ dev_dbg(dev, "ar6000_do_deactivate\n");
+ if (!hif->active)
+ return;
+
+ if (mutex_trylock(&shutdown_lock)) {
+ /*
+ * Funny, Atheros' HIF does this call, but this just puts us in
+ * a recursion through HTCShutDown/HIFShutDown if unloading the
+ * module.
+ *
+ * However, we need it for suspend/resume. See the comment at
+ * HIFShutDown, below.
+ */
+ ret = htcCallbacks.deviceRemovedHandler(hif->htc_handle, A_OK);
+ if (ret != A_OK)
+ dev_err(dev, "deviceRemovedHandler: %d\n", ret);
+ mutex_unlock(&shutdown_lock);
+ }
+ wait_queue_empty(hif);
+ ret = kthread_stop(hif->io_task);
+ if (ret)
+ dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret);
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+}
+
+
+static int ar6000_activate(struct hif_device *hif)
+{
+ int ret = 0;
+
+ dev_dbg(&hif->func->dev, "ar6000_activate\n");
+ mutex_lock(&hif->activate_lock);
+ if (!hif->active) {
+ ret = ar6000_do_activate(hif);
+ if (ret) {
+ printk(KERN_ERR "%s: Failed to activate %d\n",
+ __func__, ret);
+ goto out;
+ }
+ hif->active = 1;
+ }
+out:
+ mutex_unlock(&hif->activate_lock);
+ return ret;
+}
+
+
+static void ar6000_deactivate(struct hif_device *hif)
+{
+ dev_dbg(&hif->func->dev, "ar6000_deactivate\n");
+ mutex_lock(&hif->activate_lock);
+ if (hif->active) {
+ ar6000_do_deactivate(hif);
+ hif->active = 0;
+ }
+ mutex_unlock(&hif->activate_lock);
+}
+
+
+static int ar6000_rfkill_cb(void *data, int on)
+{
+ struct hif_device *hif = data;
+ struct sdio_func *func = hif->func;
+ struct device *dev = &func->dev;
+
+ dev_dbg(dev, "ar6000_rfkill_cb: on %d\n", on);
+ if (on)
+ return ar6000_activate(hif);
+ ar6000_deactivate(hif);
+ return 0;
+}
+
+
+static int sdio_ar6000_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct device *dev = &func->dev;
+ struct hif_device *hif;
+ int ret = 0;
+
+ dev_dbg(dev, "sdio_ar6000_probe\n");
+ BUG_ON(!htcCallbacks.deviceInsertedHandler);
+
+ hif = kzalloc(sizeof(*hif), GFP_KERNEL);
+ if (!hif)
+ return -ENOMEM;
+
+ sdio_set_drvdata(func, hif);
+ hif->func = func;
+ mutex_init(&hif->activate_lock);
+ hif->active = 0;
+
+ if (gta02_wlan_query_rfkill_lock())
+ ret = ar6000_activate(hif);
+ if (!ret) {
+ gta02_wlan_set_rfkill_cb(ar6000_rfkill_cb, hif);
+ return 0;
+ }
+ gta02_wlan_query_rfkill_unlock();
+ sdio_set_drvdata(func, NULL);
+ kfree(hif);
+ return ret;
+}
+
+
+static void sdio_ar6000_remove(struct sdio_func *func)
+{
+ struct device *dev = &func->dev;
+ HIF_DEVICE *hif = sdio_get_drvdata(func);
+
+ dev_dbg(dev, "sdio_ar6000_remove\n");
+ gta02_wlan_clear_rfkill_cb();
+ ar6000_deactivate(hif);
+ sdio_set_drvdata(func, NULL);
+ kfree(hif);
+}
+
+
+/* ----- Device registration/unregistration (called by HIF) ---------------- */
+
+
+#define ATHEROS_SDIO_DEVICE(id, offset) \
+ SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_##id | (offset))
+
+static const struct sdio_device_id sdio_ar6000_ids[] = {
+ { ATHEROS_SDIO_DEVICE(AR6002, 0) },
+ { ATHEROS_SDIO_DEVICE(AR6002, 0x1) },
+ { ATHEROS_SDIO_DEVICE(AR6001, 0x8) },
+ { ATHEROS_SDIO_DEVICE(AR6001, 0x9) },
+ { ATHEROS_SDIO_DEVICE(AR6001, 0xa) },
+ { ATHEROS_SDIO_DEVICE(AR6001, 0xb) },
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(sdio, sdio_ar6000_ids);
+
+
+static struct sdio_driver sdio_ar6000_driver = {
+ .probe = sdio_ar6000_probe,
+ .remove = sdio_ar6000_remove,
+ .name = "sdio_ar6000",
+ .id_table = sdio_ar6000_ids,
+};
+
+
+int HIFInit(HTC_CALLBACKS *callbacks)
+{
+ int ret;
+
+ BUG_ON(!callbacks);
+
+ printk(KERN_DEBUG "HIFInit\n");
+ htcCallbacks = *callbacks;
+
+ ret = sdio_register_driver(&sdio_ar6000_driver);
+ if (ret) {
+ printk(KERN_ERR
+ "sdio_register_driver(sdio_ar6000_driver): %d\n", ret);
+ return A_ERROR;
+ }
+
+ return 0;
+}
+
+
+/*
+ * We have four possible call chains here:
+ *
+ * System shutdown/reboot:
+ *
+ * kernel_restart_prepare ...> device_shutdown ... > s3cmci_shutdown ->
+ * mmc_remove_host ..> sdio_bus_remove -> sdio_ar6000_remove ->
+ * ar6000_deactivate -> ar6000_do_deactivate ->
+ * deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ * This is roughly the same sequence as suspend, described below.
+ *
+ * Module removal:
+ *
+ * sys_delete_module -> ar6000_cleanup_module -> HTCShutDown ->
+ * HIFShutDownDevice -> sdio_unregister_driver ...> sdio_bus_remove ->
+ * sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate
+ *
+ * In this case, HIFShutDownDevice must call sdio_unregister_driver to
+ * notify the driver about its removal. ar6000_do_deactivate must not call
+ * deviceRemovedHandler, because that would loop back into HIFShutDownDevice.
+ *
+ * Suspend:
+ *
+ * device_suspend ...> s3cmci_suspend ...> sdio_bus_remove ->
+ * sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate ->
+ * deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ * We must call deviceRemovedHandler to inform the ar6k stack that the device
+ * has been removed. Since HTCTargetRemovedHandler calls back into
+ * HIFShutDownDevice, we must also prevent the call to
+ * sdio_unregister_driver, or we'd end up recursing into the SDIO stack,
+ * eventually deadlocking somewhere.
+ *
+ * rfkill:
+ *
+ * rfkill_state_store -> rfkill_toggle_radio -> gta02_wlan_toggle_radio ->
+ * ar6000_rfkill_cb -> ar6000_deactivate -> ar6000_do_deactivate ->
+ * deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice
+ *
+ * This is similar to suspend - only the entry point changes.
+ */
+
+void HIFShutDownDevice(HIF_DEVICE *hif)
+{
+ /* Beware, HTCShutDown calls us with hif == NULL ! */
+ if (mutex_trylock(&shutdown_lock)) {
+ sdio_unregister_driver(&sdio_ar6000_driver);
+ mutex_unlock(&shutdown_lock);
+ }
+}
--- /dev/null
+/*
+ * @file: hif_internal.h
+ *
+ * @abstract: internal header file for hif layer
+ *
+ * @notice: Copyright (c) 2004-2006 Atheros Communications Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <linux/sdio/ctsystem.h>
+#include <linux/sdio/sdio_busdriver.h>
+#include <linux/sdio/_sdio_defs.h>
+#include <linux/sdio/sdio_lib.h>
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "hif.h"
+
+#define MANUFACTURER_ID_AR6001_BASE 0x100
+#define MANUFACTURER_ID_AR6002_BASE 0x200
+#define FUNCTION_CLASS 0x0
+#define MANUFACTURER_CODE 0x271
+
+#define BUS_REQUEST_MAX_NUM 64
+
+#define SDIO_CLOCK_FREQUENCY_DEFAULT 25000000
+#define SDWLAN_ENABLE_DISABLE_TIMEOUT 20
+#define FLAGS_CARD_ENAB 0x02
+#define FLAGS_CARD_IRQ_UNMSK 0x04
+
+#define HIF_MBOX_BLOCK_SIZE 128
+#define HIF_MBOX_BASE_ADDR 0x800
+#define HIF_MBOX_WIDTH 0x800
+#define HIF_MBOX0_BLOCK_SIZE 1
+#define HIF_MBOX1_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE
+#define HIF_MBOX2_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE
+#define HIF_MBOX3_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE
+
+#define HIF_MBOX_START_ADDR(mbox) \
+ HIF_MBOX_BASE_ADDR + mbox * HIF_MBOX_WIDTH
+
+#define HIF_MBOX_END_ADDR(mbox) \
+ HIF_MBOX_START_ADDR(mbox) + HIF_MBOX_WIDTH - 1
+
+struct hif_device {
+ SDDEVICE *handle;
+ void *htc_handle;
+ OSKERNEL_HELPER insert_helper;
+ BOOL helper_started;
+};
+
+typedef struct target_function_context {
+ SDFUNCTION function; /* function description of the bus driver */
+ OS_SEMAPHORE instanceSem; /* instance lock. Unused */
+ SDLIST instanceList; /* list of instances. Unused */
+} TARGET_FUNCTION_CONTEXT;
+
+typedef struct bus_request {
+ struct bus_request *next;
+ SDREQUEST *request;
+ void *context;
+} BUS_REQUEST;
+
+BOOL
+hifDeviceInserted(SDFUNCTION *function, SDDEVICE *device);
+
+void
+hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *device);
+
+SDREQUEST *
+hifAllocateDeviceRequest(SDDEVICE *device);
+
+void
+hifFreeDeviceRequest(SDREQUEST *request);
+
+void
+hifRWCompletionHandler(SDREQUEST *request);
+
+void
+hifIRQHandler(void *context);
+
+HIF_DEVICE *
+addHifDevice(SDDEVICE *handle);
+
+HIF_DEVICE *
+getHifDevice(SDDEVICE *handle);
+
+void
+delHifDevice(SDDEVICE *handle);
--- /dev/null
+/*
+ * AR6K device layer that handles register level I/O
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "hif.h"
+#include "htc_packet.h"
+#include "ar6k.h"
+
+#define MAILBOX_FOR_BLOCK_SIZE 1
+
+extern A_UINT32 resetok;
+
+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev);
+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev);
+
+#define LOCK_AR6K(p) A_MUTEX_LOCK(&(p)->Lock);
+#define UNLOCK_AR6K(p) A_MUTEX_UNLOCK(&(p)->Lock);
+
+void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket)
+{
+ LOCK_AR6K(pDev);
+ HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket);
+ UNLOCK_AR6K(pDev);
+}
+
+HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev)
+{
+ HTC_PACKET *pPacket;
+
+ LOCK_AR6K(pDev);
+ pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList);
+ UNLOCK_AR6K(pDev);
+
+ return pPacket;
+}
+
+A_STATUS DevSetup(AR6K_DEVICE *pDev)
+{
+ A_UINT32 mailboxaddrs[AR6K_MAILBOXES];
+ A_UINT32 blocksizes[AR6K_MAILBOXES];
+ A_STATUS status = A_OK;
+ int i;
+
+ AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16);
+ AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4);
+
+ do {
+ /* give a handle to HIF for this target */
+ HIFSetHandle(pDev->HIFDevice, (void *)pDev);
+ /* initialize our free list of IO packets */
+ INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList);
+ A_MUTEX_INIT(&pDev->Lock);
+
+ /* get the addresses for all 4 mailboxes */
+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
+ mailboxaddrs, sizeof(mailboxaddrs));
+
+ if (status != A_OK) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* carve up register I/O packets (these are for ASYNC register I/O ) */
+ for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) {
+ HTC_PACKET *pIOPacket;
+ pIOPacket = &pDev->RegIOBuffers[i].HtcPacket;
+ SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket,
+ pDev,
+ pDev->RegIOBuffers[i].Buffer,
+ AR6K_REG_IO_BUFFER_SIZE,
+ 0); /* don't care */
+ AR6KFreeIOPacket(pDev,pIOPacket);
+ }
+
+ /* get the address of the mailbox we are using */
+ pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX];
+
+ /* get the block sizes */
+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+ blocksizes, sizeof(blocksizes));
+
+ if (status != A_OK) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* note: we actually get the block size of a mailbox other than 0, for SDIO the block
+ * size on mailbox 0 is artificially set to 1. So we use the block size that is set
+ * for the other 3 mailboxes */
+ pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE];
+ /* must be a power of 2 */
+ AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0);
+
+ /* assemble mask, used for padding to a block */
+ pDev->BlockMask = pDev->BlockSize - 1;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n",
+ pDev->BlockSize, pDev->MailboxAddress));
+
+ pDev->GetPendingEventsFunc = NULL;
+ /* see if the HIF layer implements the get pending events function */
+ HIFConfigureDevice(pDev->HIFDevice,
+ HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
+ &pDev->GetPendingEventsFunc,
+ sizeof(pDev->GetPendingEventsFunc));
+
+ /* assume we can process HIF interrupt events asynchronously */
+ pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC;
+
+ /* see if the HIF layer overrides this assumption */
+ HIFConfigureDevice(pDev->HIFDevice,
+ HIF_DEVICE_GET_IRQ_PROC_MODE,
+ &pDev->HifIRQProcessingMode,
+ sizeof(pDev->HifIRQProcessingMode));
+
+ switch (pDev->HifIRQProcessingMode) {
+ case HIF_DEVICE_IRQ_SYNC_ONLY:
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n"));
+ break;
+ case HIF_DEVICE_IRQ_ASYNC_SYNC:
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n"));
+ break;
+ default:
+ AR_DEBUG_ASSERT(FALSE);
+ }
+
+ pDev->HifMaskUmaskRecvEvent = NULL;
+
+ /* see if the HIF layer implements the mask/unmask recv events function */
+ HIFConfigureDevice(pDev->HIFDevice,
+ HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
+ &pDev->HifMaskUmaskRecvEvent,
+ sizeof(pDev->HifMaskUmaskRecvEvent));
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n",
+ (A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent));
+
+ status = DevDisableInterrupts(pDev);
+
+ } while (FALSE);
+
+ if (A_FAILED(status)) {
+ /* make sure handle is cleared */
+ HIFSetHandle(pDev->HIFDevice, NULL);
+ }
+
+ return status;
+
+}
+
+static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev)
+{
+ A_STATUS status;
+ AR6K_IRQ_ENABLE_REGISTERS regs;
+
+ LOCK_AR6K(pDev);
+
+ /* Enable all the interrupts except for the dragon interrupt */
+ pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) |
+ INT_STATUS_ENABLE_CPU_SET(0x01) |
+ INT_STATUS_ENABLE_COUNTER_SET(0x01);
+
+ if (NULL == pDev->GetPendingEventsFunc) {
+ pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+ } else {
+ /* The HIF layer provided us with a pending events function which means that
+ * the detection of pending mbox messages is handled in the HIF layer.
+ * This is the case for the SPI2 interface.
+ * In the normal case we enable MBOX interrupts, for the case
+ * with HIFs that offer this mechanism, we keep these interrupts
+ * masked */
+ pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+ }
+
+
+ /* Set up the CPU Interrupt Status Register */
+ pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00);
+
+ /* Set up the Error Interrupt Status Register */
+ pDev->IrqEnableRegisters.error_status_enable =
+ ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) |
+ ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01);
+
+ /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */
+ pDev->IrqEnableRegisters.counter_int_status_enable =
+ COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK);
+
+ /* copy into our temp area */
+ A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+ UNLOCK_AR6K(pDev);
+
+ /* always synchronous */
+ status = HIFReadWrite(pDev->HIFDevice,
+ INT_STATUS_ENABLE_ADDRESS,
+ ®s.int_status_enable,
+ AR6K_IRQ_ENABLE_REGS_SIZE,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ /* Can't write it for some reason */
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Failed to update interrupt control registers err: %d\n", status));
+
+ }
+
+ return status;
+}
+
+static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev)
+{
+ AR6K_IRQ_ENABLE_REGISTERS regs;
+
+ LOCK_AR6K(pDev);
+ /* Disable all interrupts */
+ pDev->IrqEnableRegisters.int_status_enable = 0;
+ pDev->IrqEnableRegisters.cpu_int_status_enable = 0;
+ pDev->IrqEnableRegisters.error_status_enable = 0;
+ pDev->IrqEnableRegisters.counter_int_status_enable = 0;
+ /* copy into our temp area */
+ A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+ UNLOCK_AR6K(pDev);
+
+ /* always synchronous */
+ return HIFReadWrite(pDev->HIFDevice,
+ INT_STATUS_ENABLE_ADDRESS,
+ ®s.int_status_enable,
+ AR6K_IRQ_ENABLE_REGS_SIZE,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+}
+
+/* enable device interrupts */
+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev)
+{
+ /* Unmask the host controller interrupts */
+ HIFUnMaskInterrupt(pDev->HIFDevice);
+
+ return DevEnableInterrupts(pDev);
+}
+
+/* disable all device interrupts */
+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev)
+{
+ A_STATUS status;
+
+ status = DevDisableInterrupts(pDev);
+
+ if (A_SUCCESS(status)) {
+ /* Disable the interrupt at the HIF layer */
+ HIFMaskInterrupt(pDev->HIFDevice);
+ }
+
+ return status;
+}
+
+/* callback when our fetch to enable/disable completes */
+static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket)
+{
+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+ if (A_FAILED(pPacket->Status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ (" Failed to disable receiver, status:%d \n", pPacket->Status));
+ }
+ /* free this IO packet */
+ AR6KFreeIOPacket(pDev,pPacket);
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n"));
+}
+
+/* disable packet reception (used in case the host runs out of buffers)
+ * this is the "override" method when the HIF reports another methods to
+ * disable recv events */
+static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
+{
+ A_STATUS status = A_OK;
+ HTC_PACKET *pIOPacket = NULL;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
+ EnableRecv,AsyncMode));
+
+ do {
+
+ if (AsyncMode) {
+
+ pIOPacket = AR6KAllocIOPacket(pDev);
+
+ if (NULL == pIOPacket) {
+ status = A_NO_MEMORY;
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* stick in our completion routine when the I/O operation completes */
+ pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
+ pIOPacket->pContext = pDev;
+
+ /* call the HIF layer override and do this asynchronously */
+ status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
+ EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
+ pIOPacket);
+ break;
+ }
+
+ /* if we get here we are doing it synchronously */
+ status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
+ EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
+ NULL);
+
+ } while (FALSE);
+
+ if (A_FAILED(status) && (pIOPacket != NULL)) {
+ AR6KFreeIOPacket(pDev,pIOPacket);
+ }
+
+ return status;
+}
+
+/* disable packet reception (used in case the host runs out of buffers)
+ * this is the "normal" method using the interrupt enable registers through
+ * the host I/F */
+static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
+{
+ A_STATUS status = A_OK;
+ HTC_PACKET *pIOPacket = NULL;
+ AR6K_IRQ_ENABLE_REGISTERS regs;
+
+ /* take the lock to protect interrupt enable shadows */
+ LOCK_AR6K(pDev);
+
+ if (EnableRecv) {
+ pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+ } else {
+ pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01);
+ }
+
+ /* copy into our temp area */
+ A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE);
+ UNLOCK_AR6K(pDev);
+
+ do {
+
+ if (AsyncMode) {
+
+ pIOPacket = AR6KAllocIOPacket(pDev);
+
+ if (NULL == pIOPacket) {
+ status = A_NO_MEMORY;
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* copy values to write to our async I/O buffer */
+ A_MEMCPY(pIOPacket->pBuffer,®s,AR6K_IRQ_ENABLE_REGS_SIZE);
+
+ /* stick in our completion routine when the I/O operation completes */
+ pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
+ pIOPacket->pContext = pDev;
+
+ /* write it out asynchronously */
+ HIFReadWrite(pDev->HIFDevice,
+ INT_STATUS_ENABLE_ADDRESS,
+ pIOPacket->pBuffer,
+ AR6K_IRQ_ENABLE_REGS_SIZE,
+ HIF_WR_ASYNC_BYTE_INC,
+ pIOPacket);
+ break;
+ }
+
+ /* if we get here we are doing it synchronously */
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ INT_STATUS_ENABLE_ADDRESS,
+ ®s.int_status_enable,
+ AR6K_IRQ_ENABLE_REGS_SIZE,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ } while (FALSE);
+
+ if (A_FAILED(status) && (pIOPacket != NULL)) {
+ AR6KFreeIOPacket(pDev,pIOPacket);
+ }
+
+ return status;
+}
+
+
+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
+{
+ if (NULL == pDev->HifMaskUmaskRecvEvent) {
+ return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode);
+ } else {
+ return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode);
+ }
+}
+
+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode)
+{
+ if (NULL == pDev->HifMaskUmaskRecvEvent) {
+ return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode);
+ } else {
+ return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode);
+ }
+}
+
+void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs,
+ AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs)
+{
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n"));
+
+ if (pIrqProcRegs != NULL) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Int Status: 0x%x\n",pIrqProcRegs->host_int_status));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("CPU Int Status: 0x%x\n",pIrqProcRegs->cpu_int_status));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Error Int Status: 0x%x\n",pIrqProcRegs->error_int_status));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Counter Int Status: 0x%x\n",pIrqProcRegs->counter_int_status));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Mbox Frame: 0x%x\n",pIrqProcRegs->mbox_frame));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Rx Lookahead Valid: 0x%x\n",pIrqProcRegs->rx_lookahead_valid));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Rx Lookahead 0: 0x%x\n",pIrqProcRegs->rx_lookahead[0]));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Rx Lookahead 1: 0x%x\n",pIrqProcRegs->rx_lookahead[1]));
+ }
+
+ if (pIrqEnableRegs != NULL) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Int Status Enable: 0x%x\n",pIrqEnableRegs->int_status_enable));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP,
+ ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable));
+ AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n"));
+ }
+}
+
+
+#ifdef MBOXHW_UNIT_TEST
+
+
+/* This is a mailbox hardware unit test that must be called in a schedulable context
+ * This test is very simple, it will send a list of buffers with a counting pattern
+ * and the target will invert the data and send the message back
+ *
+ * the unit test has the following constraints:
+ *
+ * The target has at least 8 buffers of 256 bytes each. The host will send
+ * the following pattern of buffers in rapid succession :
+ *
+ * 1 buffer - 128 bytes
+ * 1 buffer - 256 bytes
+ * 1 buffer - 512 bytes
+ * 1 buffer - 1024 bytes
+ *
+ * The host will send the buffers to one mailbox and wait for buffers to be reflected
+ * back from the same mailbox. The target sends the buffers FIFO order.
+ * Once the final buffer has been received for a mailbox, the next mailbox is tested.
+ *
+ *
+ * Note: To simplifythe test , we assume that the chosen buffer sizes
+ * will fall on a nice block pad
+ *
+ * It is expected that higher-order tests will be written to stress the mailboxes using
+ * a message-based protocol (with some performance timming) that can create more
+ * randomness in the packets sent over mailboxes.
+ *
+ * */
+
+#define A_ROUND_UP_PWR2(x, align) (((int) (x) + ((align)-1)) & ~((align)-1))
+
+#define BUFFER_BLOCK_PAD 128
+
+#if 0
+#define BUFFER1 128
+#define BUFFER2 256
+#define BUFFER3 512
+#define BUFFER4 1024
+#endif
+
+#if 1
+#define BUFFER1 80
+#define BUFFER2 200
+#define BUFFER3 444
+#define BUFFER4 800
+#endif
+
+#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \
+ A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \
+ A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \
+ A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) )
+
+#define TEST_BYTES (BUFFER1 + BUFFER2 + BUFFER3 + BUFFER4)
+
+#define TEST_CREDITS_RECV_TIMEOUT 100
+
+static A_UINT8 g_Buffer[TOTAL_BYTES];
+static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES];
+static A_UINT32 g_BlockSizes[AR6K_MAILBOXES];
+
+#define BUFFER_PROC_LIST_DEPTH 4
+
+typedef struct _BUFFER_PROC_LIST{
+ A_UINT8 *pBuffer;
+ A_UINT32 length;
+}BUFFER_PROC_LIST;
+
+
+#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \
+{ \
+ (pList)->pBuffer = (pCurrpos); \
+ (pList)->length = (len); \
+ (pCurrpos) += (len); \
+ (pList)++; \
+}
+
+/* a simple and crude way to send different "message" sizes */
+static void AssembleBufferList(BUFFER_PROC_LIST *pList)
+{
+ A_UINT8 *pBuffer = g_Buffer;
+
+#if BUFFER_PROC_LIST_DEPTH < 4
+#error "Buffer processing list depth is not deep enough!!"
+#endif
+
+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer);
+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer);
+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer);
+ PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer);
+
+}
+
+#define FILL_ZERO TRUE
+#define FILL_COUNTING FALSE
+static void InitBuffers(A_BOOL Zero)
+{
+ A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer;
+ int i;
+
+ /* fill buffer with 16 bit counting pattern or zeros */
+ for (i = 0; i < (TOTAL_BYTES / 2) ; i++) {
+ if (!Zero) {
+ pBuffer16[i] = (A_UINT16)i;
+ } else {
+ pBuffer16[i] = 0;
+ }
+ }
+}
+
+
+static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length)
+{
+ int i;
+ A_UINT16 startCount;
+ A_BOOL success = TRUE;
+
+ /* get the starting count */
+ startCount = pBuffer16[0];
+ /* invert it, this is the expected value */
+ startCount = ~startCount;
+ /* scan the buffer and verify */
+ for (i = 0; i < (Length / 2) ; i++,startCount++) {
+ /* target will invert all the data */
+ if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) {
+ success = FALSE;
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n",
+ pBuffer16[i], ((A_UINT16)~startCount), i, Length));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n",
+ pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3]));
+ break;
+ }
+ }
+
+ return success;
+}
+
+static A_BOOL CheckBuffers(void)
+{
+ int i;
+ A_BOOL success = TRUE;
+ BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
+
+ /* assemble the list */
+ AssembleBufferList(checkList);
+
+ /* scan the buffers and verify */
+ for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
+ success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length);
+ if (!success) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
+ (A_UINT32)checkList[i].pBuffer, checkList[i].length));
+ break;
+ }
+ }
+
+ return success;
+}
+
+ /* find the end marker for the last buffer we will be sending */
+static A_UINT16 GetEndMarker(void)
+{
+ A_UINT8 *pBuffer;
+ BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
+
+ /* fill up buffers with the normal counting pattern */
+ InitBuffers(FILL_COUNTING);
+
+ /* assemble the list we will be sending down */
+ AssembleBufferList(checkList);
+ /* point to the last 2 bytes of the last buffer */
+ pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]);
+
+ /* the last count in the last buffer is the marker */
+ return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8);
+}
+
+#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR
+
+/* send the ordered buffers to the target */
+static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox)
+{
+ A_STATUS status = A_OK;
+ A_UINT32 request = HIF_WR_SYNC_BLOCK_INC;
+ BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH];
+ int i;
+ int totalBytes = 0;
+ int paddedLength;
+ int totalwPadding = 0;
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox));
+
+ /* fill buffer with counting pattern */
+ InitBuffers(FILL_COUNTING);
+
+ /* assemble the order in which we send */
+ AssembleBufferList(sendList);
+
+ for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) {
+
+ /* we are doing block transfers, so we need to pad everything to a block size */
+ paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) &
+ (~(g_BlockSizes[mbox] - 1));
+
+ /* send each buffer synchronously */
+ status = HIFReadWrite(pDev->HIFDevice,
+ g_MailboxAddrs[mbox],
+ sendList[i].pBuffer,
+ paddedLength,
+ request,
+ NULL);
+ if (status != A_OK) {
+ break;
+ }
+ totalBytes += sendList[i].length;
+ totalwPadding += paddedLength;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox));
+
+ return status;
+}
+
+/* poll the mailbox credit counter until we get a credit or timeout */
+static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits)
+{
+ A_STATUS status = A_OK;
+ int timeout = TEST_CREDITS_RECV_TIMEOUT;
+ A_UINT8 credits = 0;
+ A_UINT32 address;
+
+ while (TRUE) {
+
+ /* Read the counter register to get credits, this auto-decrements */
+ address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4;
+ status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits),
+ HIF_RD_SYNC_BYTE_FIX, NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Unable to decrement the command credit count register (mbox=%d)\n",mbox));
+ status = A_ERROR;
+ break;
+ }
+
+ if (credits) {
+ break;
+ }
+
+ timeout--;
+
+ if (timeout <= 0) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address));
+ status = A_ERROR;
+ break;
+ }
+
+ /* delay a little, target may not be ready */
+ msleep(1000);
+
+ }
+
+ if (status == A_OK) {
+ *pCredits = credits;
+ }
+
+ return status;
+}
+
+
+/* wait for the buffers to come back */
+static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox)
+{
+ A_STATUS status = A_OK;
+ A_UINT32 request = HIF_RD_SYNC_BLOCK_INC;
+ BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH];
+ int curBuffer;
+ int credits;
+ int i;
+ int totalBytes = 0;
+ int paddedLength;
+ int totalwPadding = 0;
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox));
+
+ /* zero the buffers */
+ InitBuffers(FILL_ZERO);
+
+ /* assemble the order in which we should receive */
+ AssembleBufferList(recvList);
+
+ curBuffer = 0;
+
+ while (curBuffer < BUFFER_PROC_LIST_DEPTH) {
+
+ /* get number of buffers that have been completed, this blocks
+ * until we get at least 1 credit or it times out */
+ status = GetCredits(pDev, mbox, &credits);
+
+ if (status != A_OK) {
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox));
+
+ /* get all the buffers that are sitting on the queue */
+ for (i = 0; i < credits; i++) {
+ AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH);
+ /* recv the current buffer synchronously, the buffers should come back in
+ * order... with padding applied by the target */
+ paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) &
+ (~(g_BlockSizes[mbox] - 1));
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ g_MailboxAddrs[mbox],
+ recvList[curBuffer].pBuffer,
+ paddedLength,
+ request,
+ NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n",
+ recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox]));
+ break;
+ }
+
+ totalwPadding += paddedLength;
+ totalBytes += recvList[curBuffer].length;
+ curBuffer++;
+ }
+
+ if (status != A_OK) {
+ break;
+ }
+ /* go back and get some more */
+ credits = 0;
+ }
+
+ if (totalBytes != TEST_BYTES) {
+ AR_DEBUG_ASSERT(FALSE);
+ } else {
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n",
+ mbox, totalBytes, totalwPadding));
+ }
+
+ return status;
+
+
+}
+
+static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox)
+{
+ A_STATUS status;
+
+ do {
+ /* send out buffers */
+ status = SendBuffers(pDev,mbox);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox));
+ break;
+ }
+
+ /* go get them, this will block */
+ status = RecvBuffers(pDev, mbox);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox));
+ break;
+ }
+
+ /* check the returned data patterns */
+ if (!CheckBuffers()) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox));
+ status = A_ERROR;
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox));
+
+ } while (FALSE);
+
+ return status;
+}
+
+/* here is where the test starts */
+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev)
+{
+ int i;
+ A_STATUS status;
+ int credits = 0;
+ A_UINT8 params[4];
+ int numBufs;
+ int bufferSize;
+ A_UINT16 temp;
+
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START - \n"));
+
+ do {
+ /* get the addresses for all 4 mailboxes */
+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR,
+ g_MailboxAddrs, sizeof(g_MailboxAddrs));
+
+ if (status != A_OK) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* get the block sizes */
+ status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+ g_BlockSizes, sizeof(g_BlockSizes));
+
+ if (status != A_OK) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* note, the HIF layer usually reports mbox 0 to have a block size of
+ * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes
+ * the same. */
+ g_BlockSizes[0] = g_BlockSizes[1];
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0]));
+
+ if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) {
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n",
+ g_BlockSizes[1], BUFFER_BLOCK_PAD));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n"));
+
+ /* the target lets us know it is ready by giving us 1 credit on
+ * mailbox 0 */
+ status = GetCredits(pDev, 0, &credits);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n"));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n"));
+
+ /* read the first 4 scratch registers */
+ status = HIFReadWrite(pDev->HIFDevice,
+ SCRATCH_ADDRESS,
+ params,
+ 4,
+ HIF_RD_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n"));
+ break;
+ }
+
+ numBufs = params[0];
+ bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]);
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE,
+ ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n",
+ numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES));
+
+ if ((numBufs * bufferSize) < TOTAL_BYTES) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n",
+ TOTAL_BYTES, (numBufs*bufferSize)));
+ status = A_ERROR;
+ break;
+ }
+
+ temp = GetEndMarker();
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ SCRATCH_ADDRESS + 4,
+ (A_UINT8 *)&temp,
+ 2,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n"));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp));
+
+ temp = (A_UINT16)g_BlockSizes[1];
+ /* convert to a mask */
+ temp = temp - 1;
+ status = HIFReadWrite(pDev->HIFDevice,
+ SCRATCH_ADDRESS + 6,
+ (A_UINT8 *)&temp,
+ 2,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n"));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp));
+
+ /* execute the test on each mailbox */
+ for (i = 0; i < AR6K_MAILBOXES; i++) {
+ status = DoOneMboxHWTest(pDev, i);
+ if (status != A_OK) {
+ break;
+ }
+ }
+
+ } while (FALSE);
+
+ if (status == A_OK) {
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! - \n"));
+ } else {
+ AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! - \n"));
+ }
+ /* don't let HTC_Start continue, the target is actually not running any HTC code */
+ return A_ERROR;
+}
+#endif
+
+
+
--- /dev/null
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef AR6K_H_
+#define AR6K_H_
+
+#define AR6K_MAILBOXES 4
+
+/* HTC runs over mailbox 0 */
+#define HTC_MAILBOX 0
+
+#define AR6K_TARGET_DEBUG_INTR_MASK 0x01
+
+#define OTHER_INTS_ENABLED (INT_STATUS_ENABLE_ERROR_MASK | \
+ INT_STATUS_ENABLE_CPU_MASK | \
+ INT_STATUS_ENABLE_COUNTER_MASK)
+
+//#define MBOXHW_UNIT_TEST 1
+
+#include "athstartpack.h"
+typedef PREPACK struct _AR6K_IRQ_PROC_REGISTERS {
+ A_UINT8 host_int_status;
+ A_UINT8 cpu_int_status;
+ A_UINT8 error_int_status;
+ A_UINT8 counter_int_status;
+ A_UINT8 mbox_frame;
+ A_UINT8 rx_lookahead_valid;
+ A_UINT8 hole[2];
+ A_UINT32 rx_lookahead[2];
+} POSTPACK AR6K_IRQ_PROC_REGISTERS;
+
+#define AR6K_IRQ_PROC_REGS_SIZE sizeof(AR6K_IRQ_PROC_REGISTERS)
+
+
+
+typedef PREPACK struct _AR6K_IRQ_ENABLE_REGISTERS {
+ A_UINT8 int_status_enable;
+ A_UINT8 cpu_int_status_enable;
+ A_UINT8 error_status_enable;
+ A_UINT8 counter_int_status_enable;
+} POSTPACK AR6K_IRQ_ENABLE_REGISTERS;
+
+#include "athendpack.h"
+
+#define AR6K_IRQ_ENABLE_REGS_SIZE sizeof(AR6K_IRQ_ENABLE_REGISTERS)
+
+#define AR6K_REG_IO_BUFFER_SIZE 32
+#define AR6K_MAX_REG_IO_BUFFERS 8
+
+/* buffers for ASYNC I/O */
+typedef struct AR6K_ASYNC_REG_IO_BUFFER {
+ HTC_PACKET HtcPacket; /* we use an HTC packet as a wrapper for our async register-based I/O */
+ A_UINT8 Buffer[AR6K_REG_IO_BUFFER_SIZE];
+} AR6K_ASYNC_REG_IO_BUFFER;
+
+typedef struct _AR6K_DEVICE {
+ A_MUTEX_T Lock;
+ AR6K_IRQ_PROC_REGISTERS IrqProcRegisters;
+ AR6K_IRQ_ENABLE_REGISTERS IrqEnableRegisters;
+ void *HIFDevice;
+ A_UINT32 BlockSize;
+ A_UINT32 BlockMask;
+ A_UINT32 MailboxAddress;
+ HIF_PENDING_EVENTS_FUNC GetPendingEventsFunc;
+ void *HTCContext;
+ HTC_PACKET_QUEUE RegisterIOList;
+ AR6K_ASYNC_REG_IO_BUFFER RegIOBuffers[AR6K_MAX_REG_IO_BUFFERS];
+ void (*TargetFailureCallback)(void *Context);
+ A_STATUS (*MessagePendingCallback)(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
+ HIF_DEVICE_IRQ_PROCESSING_MODE HifIRQProcessingMode;
+ HIF_MASK_UNMASK_RECV_EVENT HifMaskUmaskRecvEvent;
+} AR6K_DEVICE;
+
+#define IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(pDev) ((pDev)->HifIRQProcessingMode != HIF_DEVICE_IRQ_SYNC_ONLY)
+
+A_STATUS DevSetup(AR6K_DEVICE *pDev);
+A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev);
+A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev);
+A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
+ A_UINT32 *pLookAhead,
+ int TimeoutMS);
+A_STATUS DevRWCompletionHandler(void *context, A_STATUS status);
+A_STATUS DevDsrHandler(void *context);
+A_STATUS DevCheckPendingRecvMsgsAsync(void *context);
+void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs,
+ AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs);
+
+#define DEV_STOP_RECV_ASYNC TRUE
+#define DEV_STOP_RECV_SYNC FALSE
+#define DEV_ENABLE_RECV_ASYNC TRUE
+#define DEV_ENABLE_RECV_SYNC FALSE
+A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
+A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode);
+
+static INLINE A_STATUS DevSendPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 SendLength) {
+ A_UINT32 paddedLength;
+ A_BOOL sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
+ A_STATUS status;
+
+ /* adjust the length to be a multiple of block size if appropriate */
+ paddedLength = (SendLength + (pDev->BlockMask)) &
+ (~(pDev->BlockMask));
+#if 0 // BufferLength may not be set in , fix this...
+ if (paddedLength > pPacket->BufferLength) {
+ AR_DEBUG_ASSERT(FALSE);
+ if (pPacket->Completion != NULL) {
+ COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
+ }
+ return A_EINVAL;
+ }
+#endif
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+ ("DevSendPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
+ paddedLength,
+ pDev->MailboxAddress,
+ sync ? "SYNC" : "ASYNC"));
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ pDev->MailboxAddress,
+ pPacket->pBuffer,
+ paddedLength, /* the padded length */
+ sync ? HIF_WR_SYNC_BLOCK_INC : HIF_WR_ASYNC_BLOCK_INC,
+ sync ? NULL : pPacket); /* pass the packet as the context to the HIF request */
+
+ if (sync) {
+ pPacket->Status = status;
+ }
+
+ return status;
+}
+
+static INLINE A_STATUS DevRecvPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 RecvLength) {
+ A_UINT32 paddedLength;
+ A_STATUS status;
+ A_BOOL sync = (pPacket->Completion == NULL) ? TRUE : FALSE;
+
+ /* adjust the length to be a multiple of block size if appropriate */
+ paddedLength = (RecvLength + (pDev->BlockMask)) &
+ (~(pDev->BlockMask));
+ if (paddedLength > pPacket->BufferLength) {
+ AR_DEBUG_ASSERT(FALSE);
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("DevRecvPacket, Not enough space for padlen:%d recvlen:%d bufferlen:%d \n",
+ paddedLength,RecvLength,pPacket->BufferLength));
+ if (pPacket->Completion != NULL) {
+ COMPLETE_HTC_PACKET(pPacket,A_EINVAL);
+ }
+ return A_EINVAL;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+ ("DevRecvPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n",
+ paddedLength,
+ pDev->MailboxAddress,
+ sync ? "SYNC" : "ASYNC"));
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ pDev->MailboxAddress,
+ pPacket->pBuffer,
+ paddedLength,
+ sync ? HIF_RD_SYNC_BLOCK_INC : HIF_RD_ASYNC_BLOCK_INC,
+ sync ? NULL : pPacket); /* pass the packet as the context to the HIF request */
+
+ if (sync) {
+ pPacket->Status = status;
+ }
+
+ return status;
+}
+
+#ifdef MBOXHW_UNIT_TEST
+A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev);
+#endif
+
+#endif /*AR6K_H_*/
--- /dev/null
+/*
+ * AR6K Driver layer event handling (i.e. interrupts, message polling)
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "hif.h"
+#include "htc_packet.h"
+#include "ar6k.h"
+
+extern void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket);
+extern HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev);
+
+static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev);
+
+#define DELAY_PER_INTERVAL_MS 10 /* 10 MS delay per polling interval */
+
+/* completion routine for ALL HIF layer async I/O */
+A_STATUS DevRWCompletionHandler(void *context, A_STATUS status)
+{
+ HTC_PACKET *pPacket = (HTC_PACKET *)context;
+
+ COMPLETE_HTC_PACKET(pPacket,status);
+
+ return A_OK;
+}
+
+/* mailbox recv message polling */
+A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev,
+ A_UINT32 *pLookAhead,
+ int TimeoutMS)
+{
+ A_STATUS status = A_OK;
+ int timeout = TimeoutMS/DELAY_PER_INTERVAL_MS;
+
+ AR_DEBUG_ASSERT(timeout > 0);
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevPollMboxMsgRecv \n"));
+
+ while (TRUE) {
+
+ if (pDev->GetPendingEventsFunc != NULL)
+ {
+
+ HIF_PENDING_EVENTS_INFO events;
+
+ /* the HIF layer uses a special mechanism to get events, do this
+ * synchronously */
+ status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+ &events,
+ NULL);
+ if (A_FAILED(status))
+ {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to get pending events \n"));
+ break;
+ }
+
+ if (events.Events & HIF_RECV_MSG_AVAIL)
+ {
+ /* there is a message available, the lookahead should be valid now */
+ *pLookAhead = events.LookAhead;
+
+ break;
+ }
+ }
+ else
+ {
+
+ /* this is the standard HIF way.... */
+ /* load the register table */
+ status = HIFReadWrite(pDev->HIFDevice,
+ HOST_INT_STATUS_ADDRESS,
+ (A_UINT8 *)&pDev->IrqProcRegisters,
+ AR6K_IRQ_PROC_REGS_SIZE,
+ HIF_RD_SYNC_BYTE_INC,
+ NULL);
+
+ if (A_FAILED(status))
+ {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to read register table \n"));
+ break;
+ }
+
+ /* check for MBOX data and valid lookahead */
+ if (pDev->IrqProcRegisters.host_int_status & (1 << HTC_MAILBOX))
+ {
+ if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX))
+ {
+ /* mailbox has a message and the look ahead is valid */
+ *pLookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
+ break;
+ }
+ }
+
+ }
+
+ timeout--;
+
+ if (timeout <= 0)
+ {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Timeout waiting for recv message \n"));
+ status = A_ERROR;
+
+ /* check if the target asserted */
+ if ( pDev->IrqProcRegisters.counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
+ /* target signaled an assert, process this pending interrupt
+ * this will call the target failure handler */
+ DevServiceDebugInterrupt(pDev);
+ }
+
+ break;
+ }
+
+ /* delay a little */
+ msleep(DELAY_PER_INTERVAL_MS);
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" Retry Mbox Poll : %d \n",timeout));
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevPollMboxMsgRecv \n"));
+
+ return status;
+}
+
+static A_STATUS DevServiceCPUInterrupt(AR6K_DEVICE *pDev)
+{
+ A_STATUS status;
+ A_UINT8 cpu_int_status;
+ A_UINT8 regBuffer[4];
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("CPU Interrupt\n"));
+ cpu_int_status = pDev->IrqProcRegisters.cpu_int_status &
+ pDev->IrqEnableRegisters.cpu_int_status_enable;
+ AR_DEBUG_ASSERT(cpu_int_status);
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+ ("Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n",
+ cpu_int_status));
+
+ /* Clear the interrupt */
+ pDev->IrqProcRegisters.cpu_int_status &= ~cpu_int_status; /* W1C */
+
+ /* set up the register transfer buffer to hit the register 4 times , this is done
+ * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
+ * restrict bus transfer lengths to be a multiple of 4-bytes */
+
+ /* set W1C value to clear the interrupt, this hits the register first */
+ regBuffer[0] = cpu_int_status;
+ /* the remaining 4 values are set to zero which have no-effect */
+ regBuffer[1] = 0;
+ regBuffer[2] = 0;
+ regBuffer[3] = 0;
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ CPU_INT_STATUS_ADDRESS,
+ regBuffer,
+ 4,
+ HIF_WR_SYNC_BYTE_FIX,
+ NULL);
+
+ AR_DEBUG_ASSERT(status == A_OK);
+ return status;
+}
+
+
+static A_STATUS DevServiceErrorInterrupt(AR6K_DEVICE *pDev)
+{
+ A_STATUS status;
+ A_UINT8 error_int_status;
+ A_UINT8 regBuffer[4];
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error Interrupt\n"));
+ error_int_status = pDev->IrqProcRegisters.error_int_status & 0x0F;
+ AR_DEBUG_ASSERT(error_int_status);
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+ ("Valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n",
+ error_int_status));
+
+ if (ERROR_INT_STATUS_WAKEUP_GET(error_int_status)) {
+ /* Wakeup */
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error : Wakeup\n"));
+ }
+
+ if (ERROR_INT_STATUS_RX_UNDERFLOW_GET(error_int_status)) {
+ /* Rx Underflow */
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Rx Underflow\n"));
+ }
+
+ if (ERROR_INT_STATUS_TX_OVERFLOW_GET(error_int_status)) {
+ /* Tx Overflow */
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Tx Overflow\n"));
+ }
+
+ /* Clear the interrupt */
+ pDev->IrqProcRegisters.error_int_status &= ~error_int_status; /* W1C */
+
+ /* set up the register transfer buffer to hit the register 4 times , this is done
+ * to make the access 4-byte aligned to mitigate issues with host bus interconnects that
+ * restrict bus transfer lengths to be a multiple of 4-bytes */
+
+ /* set W1C value to clear the interrupt, this hits the register first */
+ regBuffer[0] = error_int_status;
+ /* the remaining 4 values are set to zero which have no-effect */
+ regBuffer[1] = 0;
+ regBuffer[2] = 0;
+ regBuffer[3] = 0;
+
+ status = HIFReadWrite(pDev->HIFDevice,
+ ERROR_INT_STATUS_ADDRESS,
+ regBuffer,
+ 4,
+ HIF_WR_SYNC_BYTE_FIX,
+ NULL);
+
+ AR_DEBUG_ASSERT(status == A_OK);
+ return status;
+}
+
+static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev)
+{
+ A_UINT32 dummy;
+ A_STATUS status;
+
+ /* Send a target failure event to the application */
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Target debug interrupt\n"));
+
+ if (pDev->TargetFailureCallback != NULL) {
+ pDev->TargetFailureCallback(pDev->HTCContext);
+ }
+
+ /* clear the interrupt , the debug error interrupt is
+ * counter 0 */
+ /* read counter to clear interrupt */
+ status = HIFReadWrite(pDev->HIFDevice,
+ COUNT_DEC_ADDRESS,
+ (A_UINT8 *)&dummy,
+ 4,
+ HIF_RD_SYNC_BYTE_INC,
+ NULL);
+
+ AR_DEBUG_ASSERT(status == A_OK);
+ return status;
+}
+
+static A_STATUS DevServiceCounterInterrupt(AR6K_DEVICE *pDev)
+{
+ A_UINT8 counter_int_status;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Counter Interrupt\n"));
+
+ counter_int_status = pDev->IrqProcRegisters.counter_int_status &
+ pDev->IrqEnableRegisters.counter_int_status_enable;
+
+ AR_DEBUG_ASSERT(counter_int_status);
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+ ("Valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n",
+ counter_int_status));
+
+ /* Check if the debug interrupt is pending */
+ if (counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) {
+ return DevServiceDebugInterrupt(pDev);
+ }
+
+ return A_OK;
+}
+
+/* callback when our fetch to get interrupt status registers completes */
+static void DevGetEventAsyncHandler(void *Context, HTC_PACKET *pPacket)
+{
+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context;
+ A_UINT32 lookAhead = 0;
+ A_BOOL otherInts = FALSE;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevGetEventAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+ do {
+
+ if (A_FAILED(pPacket->Status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ (" GetEvents I/O request failed, status:%d \n", pPacket->Status));
+ /* bail out, don't unmask HIF interrupt */
+ break;
+ }
+
+ if (pDev->GetPendingEventsFunc != NULL) {
+ /* the HIF layer collected the information for us */
+ HIF_PENDING_EVENTS_INFO *pEvents = (HIF_PENDING_EVENTS_INFO *)pPacket->pBuffer;
+ if (pEvents->Events & HIF_RECV_MSG_AVAIL) {
+ lookAhead = pEvents->LookAhead;
+ if (0 == lookAhead) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler1, lookAhead is zero! \n"));
+ }
+ }
+ if (pEvents->Events & HIF_OTHER_EVENTS) {
+ otherInts = TRUE;
+ }
+ } else {
+ /* standard interrupt table handling.... */
+ AR6K_IRQ_PROC_REGISTERS *pReg = (AR6K_IRQ_PROC_REGISTERS *)pPacket->pBuffer;
+ A_UINT8 host_int_status;
+
+ host_int_status = pReg->host_int_status & pDev->IrqEnableRegisters.int_status_enable;
+
+ if (host_int_status & (1 << HTC_MAILBOX)) {
+ host_int_status &= ~(1 << HTC_MAILBOX);
+ if (pReg->rx_lookahead_valid & (1 << HTC_MAILBOX)) {
+ /* mailbox has a message and the look ahead is valid */
+ lookAhead = pReg->rx_lookahead[HTC_MAILBOX];
+ if (0 == lookAhead) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler2, lookAhead is zero! \n"));
+ }
+ }
+ }
+
+ if (host_int_status) {
+ /* there are other interrupts to handle */
+ otherInts = TRUE;
+ }
+ }
+
+ if (otherInts || (lookAhead == 0)) {
+ /* if there are other interrupts to process, we cannot do this in the async handler so
+ * ack the interrupt which will cause our sync handler to run again
+ * if however there are no more messages, we can now ack the interrupt */
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+ (" Acking interrupt from DevGetEventAsyncHandler (otherints:%d, lookahead:0x%X)\n",
+ otherInts, lookAhead));
+ HIFAckInterrupt(pDev->HIFDevice);
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+ (" DevGetEventAsyncHandler : detected another message, lookahead :0x%X \n",
+ lookAhead));
+ /* lookahead is non-zero and there are no other interrupts to service,
+ * go get the next message */
+ pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, NULL);
+ }
+
+ } while (FALSE);
+
+ /* free this IO packet */
+ AR6KFreeIOPacket(pDev,pPacket);
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevGetEventAsyncHandler \n"));
+}
+
+/* called by the HTC layer when it wants us to check if the device has any more pending
+ * recv messages, this starts off a series of async requests to read interrupt registers */
+A_STATUS DevCheckPendingRecvMsgsAsync(void *context)
+{
+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)context;
+ A_STATUS status = A_OK;
+ HTC_PACKET *pIOPacket;
+
+ /* this is called in an ASYNC only context, we may NOT block, sleep or call any apis that can
+ * cause us to switch contexts */
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevCheckPendingRecvMsgsAsync: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+ do {
+
+ if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
+ /* break the async processing chain right here, no need to continue.
+ * The DevDsrHandler() will handle things in a loop when things are driven
+ * synchronously */
+ break;
+ }
+ /* first allocate one of our HTC packets we created for async I/O
+ * we reuse HTC packet definitions so that we can use the completion mechanism
+ * in DevRWCompletionHandler() */
+ pIOPacket = AR6KAllocIOPacket(pDev);
+
+ if (NULL == pIOPacket) {
+ /* there should be only 1 asynchronous request out at a time to read these registers
+ * so this should actually never happen */
+ status = A_NO_MEMORY;
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* stick in our completion routine when the I/O operation completes */
+ pIOPacket->Completion = DevGetEventAsyncHandler;
+ pIOPacket->pContext = pDev;
+
+ if (pDev->GetPendingEventsFunc) {
+ /* HIF layer has it's own mechanism, pass the IO to it.. */
+ status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+ (HIF_PENDING_EVENTS_INFO *)pIOPacket->pBuffer,
+ pIOPacket);
+
+ } else {
+ /* standard way, read the interrupt register table asynchronously again */
+ status = HIFReadWrite(pDev->HIFDevice,
+ HOST_INT_STATUS_ADDRESS,
+ pIOPacket->pBuffer,
+ AR6K_IRQ_PROC_REGS_SIZE,
+ HIF_RD_ASYNC_BYTE_INC,
+ pIOPacket);
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Async IO issued to get interrupt status...\n"));
+ } while (FALSE);
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevCheckPendingRecvMsgsAsync \n"));
+
+ return status;
+}
+
+/* process pending interrupts synchronously */
+static A_STATUS ProcessPendingIRQs(AR6K_DEVICE *pDev, A_BOOL *pDone, A_BOOL *pASyncProcessing)
+{
+ A_STATUS status = A_OK;
+ A_UINT8 host_int_status = 0;
+ A_UINT32 lookAhead = 0;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+ProcessPendingIRQs: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+ /*** NOTE: the HIF implementation guarantees that the context of this call allows
+ * us to perform SYNCHRONOUS I/O, that is we can block, sleep or call any API that
+ * can block or switch thread/task ontexts.
+ * This is a fully schedulable context.
+ * */
+ do {
+
+ if (pDev->GetPendingEventsFunc != NULL) {
+ HIF_PENDING_EVENTS_INFO events;
+
+ /* the HIF layer uses a special mechanism to get events
+ * get this synchronously */
+ status = pDev->GetPendingEventsFunc(pDev->HIFDevice,
+ &events,
+ NULL);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ if (events.Events & HIF_RECV_MSG_AVAIL) {
+ lookAhead = events.LookAhead;
+ if (0 == lookAhead) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs1 lookAhead is zero! \n"));
+ }
+ }
+
+ if (!(events.Events & HIF_OTHER_EVENTS) ||
+ !(pDev->IrqEnableRegisters.int_status_enable & OTHER_INTS_ENABLED)) {
+ /* no need to read the register table, no other interesting interrupts.
+ * Some interfaces (like SPI) can shadow interrupt sources without
+ * requiring the host to do a full table read */
+ break;
+ }
+
+ /* otherwise fall through and read the register table */
+ }
+
+ /*
+ * Read the first 28 bytes of the HTC register table. This will yield us
+ * the value of different int status registers and the lookahead
+ * registers.
+ * length = sizeof(int_status) + sizeof(cpu_int_status) +
+ * sizeof(error_int_status) + sizeof(counter_int_status) +
+ * sizeof(mbox_frame) + sizeof(rx_lookahead_valid) +
+ * sizeof(hole) + sizeof(rx_lookahead) +
+ * sizeof(int_status_enable) + sizeof(cpu_int_status_enable) +
+ * sizeof(error_status_enable) +
+ * sizeof(counter_int_status_enable);
+ *
+ */
+ status = HIFReadWrite(pDev->HIFDevice,
+ HOST_INT_STATUS_ADDRESS,
+ (A_UINT8 *)&pDev->IrqProcRegisters,
+ AR6K_IRQ_PROC_REGS_SIZE,
+ HIF_RD_SYNC_BYTE_INC,
+ NULL);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_IRQ)) {
+ DevDumpRegisters(&pDev->IrqProcRegisters,
+ &pDev->IrqEnableRegisters);
+ }
+
+ /* Update only those registers that are enabled */
+ host_int_status = pDev->IrqProcRegisters.host_int_status &
+ pDev->IrqEnableRegisters.int_status_enable;
+
+ if (NULL == pDev->GetPendingEventsFunc) {
+ /* only look at mailbox status if the HIF layer did not provide this function,
+ * on some HIF interfaces reading the RX lookahead is not valid to do */
+ if (host_int_status & (1 << HTC_MAILBOX)) {
+ /* mask out pending mailbox value, we use "lookAhead" as the real flag for
+ * mailbox processing below */
+ host_int_status &= ~(1 << HTC_MAILBOX);
+ if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) {
+ /* mailbox has a message and the look ahead is valid */
+ lookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX];
+ if (0 == lookAhead) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs2, lookAhead is zero! \n"));
+ }
+ }
+ }
+ } else {
+ /* not valid to check if the HIF has another mechanism for reading mailbox pending status*/
+ host_int_status &= ~(1 << HTC_MAILBOX);
+ }
+
+ } while (FALSE);
+
+
+ do {
+
+ /* did the interrupt status fetches succeed? */
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ if ((0 == host_int_status) && (0 == lookAhead)) {
+ /* nothing to process, the caller can use this to break out of a loop */
+ *pDone = TRUE;
+ break;
+ }
+
+ if (lookAhead != 0) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Pending mailbox message, LookAhead: 0x%X\n",lookAhead));
+ /* Mailbox Interrupt, the HTC layer may issue async requests to empty the
+ * mailbox...
+ * When emptying the recv mailbox we use the async handler above called from the
+ * completion routine of the callers read request. This can improve performance
+ * by reducing context switching when we rapidly pull packets */
+ status = pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, pASyncProcessing);
+ if (A_FAILED(status)) {
+ break;
+ }
+ }
+
+ /* now handle the rest of them */
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,
+ (" Valid interrupt source(s) for OTHER interrupts: 0x%x\n",
+ host_int_status));
+
+ if (HOST_INT_STATUS_CPU_GET(host_int_status)) {
+ /* CPU Interrupt */
+ status = DevServiceCPUInterrupt(pDev);
+ if (A_FAILED(status)){
+ break;
+ }
+ }
+
+ if (HOST_INT_STATUS_ERROR_GET(host_int_status)) {
+ /* Error Interrupt */
+ status = DevServiceErrorInterrupt(pDev);
+ if (A_FAILED(status)){
+ break;
+ }
+ }
+
+ if (HOST_INT_STATUS_COUNTER_GET(host_int_status)) {
+ /* Counter Interrupt */
+ status = DevServiceCounterInterrupt(pDev);
+ if (A_FAILED(status)){
+ break;
+ }
+ }
+
+ } while (FALSE);
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-ProcessPendingIRQs: (done:%d, async:%d) status=%d \n",
+ *pDone, *pASyncProcessing, status));
+
+ return status;
+}
+
+
+/* Synchronousinterrupt handler, this handler kicks off all interrupt processing.*/
+A_STATUS DevDsrHandler(void *context)
+{
+ AR6K_DEVICE *pDev = (AR6K_DEVICE *)context;
+ A_STATUS status = A_OK;
+ A_BOOL done = FALSE;
+ A_BOOL asyncProc = FALSE;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDsrHandler: (dev: 0x%X)\n", (A_UINT32)pDev));
+
+
+ while (!done) {
+ status = ProcessPendingIRQs(pDev, &done, &asyncProc);
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) {
+ /* the HIF layer does not allow async IRQ processing, override the asyncProc flag */
+ asyncProc = FALSE;
+ /* this will cause us to re-enter ProcessPendingIRQ() and re-read interrupt status registers.
+ * this has a nice side effect of blocking us until all async read requests are completed.
+ * This behavior is required on some HIF implementations that do not allow ASYNC
+ * processing in interrupt handlers (like Windows CE) */
+ }
+
+ if (asyncProc) {
+ /* the function performed some async I/O for performance, we
+ need to exit the ISR immediately, the check below will prevent the interrupt from being
+ Ack'd while we handle it asynchronously */
+ break;
+ }
+
+ }
+
+ if (A_SUCCESS(status) && !asyncProc) {
+ /* Ack the interrupt only if :
+ * 1. we did not get any errors in processing interrupts
+ * 2. there are no outstanding async processing requests */
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Acking interrupt from DevDsrHandler \n"));
+ HIFAckInterrupt(pDev->HIFDevice);
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDsrHandler \n"));
+ return A_OK;
+}
+
+
--- /dev/null
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+
+static HTC_INIT_INFO HTCInitInfo = {NULL,NULL,NULL};
+static A_BOOL HTCInitialized = FALSE;
+
+static A_STATUS HTCTargetInsertedHandler(void *hif_handle);
+static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status);
+static void HTCReportFailure(void *Context);
+
+/* Initializes the HTC layer */
+A_STATUS HTCInit(HTC_INIT_INFO *pInitInfo)
+{
+ HTC_CALLBACKS htcCallbacks;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Enter\n"));
+ if (HTCInitialized) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
+ return A_OK;
+ }
+
+ A_MEMCPY(&HTCInitInfo,pInitInfo,sizeof(HTC_INIT_INFO));
+
+ A_MEMZERO(&htcCallbacks, sizeof(HTC_CALLBACKS));
+
+ /* setup HIF layer callbacks */
+ htcCallbacks.deviceInsertedHandler = HTCTargetInsertedHandler;
+ htcCallbacks.deviceRemovedHandler = HTCTargetRemovedHandler;
+ /* the device layer handles these */
+ htcCallbacks.rwCompletionHandler = DevRWCompletionHandler;
+ htcCallbacks.dsrHandler = DevDsrHandler;
+ HIFInit(&htcCallbacks);
+ HTCInitialized = TRUE;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n"));
+ return A_OK;
+}
+
+void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList)
+{
+ LOCK_HTC(target);
+ HTC_PACKET_ENQUEUE(pList,pPacket);
+ UNLOCK_HTC(target);
+}
+
+HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList)
+{
+ HTC_PACKET *pPacket;
+
+ LOCK_HTC(target);
+ pPacket = HTC_PACKET_DEQUEUE(pList);
+ UNLOCK_HTC(target);
+
+ return pPacket;
+}
+
+/* cleanup the HTC instance */
+static void HTCCleanup(HTC_TARGET *target)
+{
+ if (A_IS_MUTEX_VALID(&target->HTCLock)) {
+ A_MUTEX_DELETE(&target->HTCLock);
+ }
+
+ if (A_IS_MUTEX_VALID(&target->HTCRxLock)) {
+ A_MUTEX_DELETE(&target->HTCRxLock);
+ }
+
+ if (A_IS_MUTEX_VALID(&target->HTCTxLock)) {
+ A_MUTEX_DELETE(&target->HTCTxLock);
+ }
+ /* free our instance */
+ A_FREE(target);
+}
+
+/* registered target arrival callback from the HIF layer */
+static A_STATUS HTCTargetInsertedHandler(void *hif_handle)
+{
+ HTC_TARGET *target = NULL;
+ A_STATUS status;
+ int i;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Enter\n"));
+
+ do {
+
+ /* allocate target memory */
+ if ((target = (HTC_TARGET *)A_MALLOC(sizeof(HTC_TARGET))) == NULL) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to allocate memory\n"));
+ status = A_ERROR;
+ break;
+ }
+
+ A_MEMZERO(target, sizeof(HTC_TARGET));
+ A_MUTEX_INIT(&target->HTCLock);
+ A_MUTEX_INIT(&target->HTCRxLock);
+ A_MUTEX_INIT(&target->HTCTxLock);
+ INIT_HTC_PACKET_QUEUE(&target->ControlBufferTXFreeList);
+ INIT_HTC_PACKET_QUEUE(&target->ControlBufferRXFreeList);
+
+ /* give device layer the hif device handle */
+ target->Device.HIFDevice = hif_handle;
+ /* give the device layer our context (for event processing)
+ * the device layer will register it's own context with HIF
+ * so we need to set this so we can fetch it in the target remove handler */
+ target->Device.HTCContext = target;
+ /* set device layer target failure callback */
+ target->Device.TargetFailureCallback = HTCReportFailure;
+ /* set device layer recv message pending callback */
+ target->Device.MessagePendingCallback = HTCRecvMessagePendingHandler;
+ target->EpWaitingForBuffers = ENDPOINT_MAX;
+
+ /* setup device layer */
+ status = DevSetup(&target->Device);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* carve up buffers/packets for control messages */
+ for (i = 0; i < NUM_CONTROL_RX_BUFFERS; i++) {
+ HTC_PACKET *pControlPacket;
+ pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
+ SET_HTC_PACKET_INFO_RX_REFILL(pControlPacket,
+ target,
+ target->HTCControlBuffers[i].Buffer,
+ HTC_CONTROL_BUFFER_SIZE,
+ ENDPOINT_0);
+ HTC_FREE_CONTROL_RX(target,pControlPacket);
+ }
+
+ for (;i < NUM_CONTROL_BUFFERS;i++) {
+ HTC_PACKET *pControlPacket;
+ pControlPacket = &target->HTCControlBuffers[i].HtcPacket;
+ INIT_HTC_PACKET_INFO(pControlPacket,
+ target->HTCControlBuffers[i].Buffer,
+ HTC_CONTROL_BUFFER_SIZE);
+ HTC_FREE_CONTROL_TX(target,pControlPacket);
+ }
+
+ } while (FALSE);
+
+ if (A_SUCCESS(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" calling AddInstance callback \n"));
+ /* announce ourselves */
+ HTCInitInfo.AddInstance((HTC_HANDLE)target);
+ } else {
+ if (target != NULL) {
+ HTCCleanup(target);
+ }
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Exit\n"));
+
+ return status;
+}
+
+/* registered removal callback from the HIF layer */
+static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status)
+{
+ HTC_TARGET *target;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCTargetRemovedHandler handle:0x%X \n",(A_UINT32)handle));
+
+ if (NULL == handle) {
+ /* this could be NULL in the event that target initialization failed */
+ return A_OK;
+ }
+
+ target = ((AR6K_DEVICE *)handle)->HTCContext;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" removing target:0x%X instance:0x%X ... \n",
+ (A_UINT32)target, (A_UINT32)target->pInstanceContext));
+
+ if (target->pInstanceContext != NULL) {
+ /* let upper layer know, it needs to call HTCStop() */
+ HTCInitInfo.DeleteInstance(target->pInstanceContext);
+ }
+
+ HIFShutDownDevice(target->Device.HIFDevice);
+
+ HTCCleanup(target);
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCTargetRemovedHandler \n"));
+ return A_OK;
+}
+
+/* get the low level HIF device for the caller , the caller may wish to do low level
+ * HIF requests */
+void *HTCGetHifDevice(HTC_HANDLE HTCHandle)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ return target->Device.HIFDevice;
+}
+
+/* set the instance block for this HTC handle, so that on removal, the blob can be
+ * returned to the caller */
+void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+
+ target->pInstanceContext = Instance;
+}
+
+/* wait for the target to arrive (sends HTC Ready message)
+ * this operation is fully synchronous and the message is polled for */
+A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ A_STATUS status;
+ HTC_PACKET *pPacket = NULL;
+ HTC_READY_MSG *pRdyMsg;
+ HTC_SERVICE_CONNECT_REQ connect;
+ HTC_SERVICE_CONNECT_RESP resp;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Enter (target:0x%X) \n", (A_UINT32)target));
+
+ do {
+
+#ifdef MBOXHW_UNIT_TEST
+
+ status = DoMboxHWTest(&target->Device);
+
+ if (status != A_OK) {
+ break;
+ }
+
+#endif
+
+ /* we should be getting 1 control message that the target is ready */
+ status = HTCWaitforControlMessage(target, &pPacket);
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Target Not Available!!\n"));
+ break;
+ }
+
+ /* we controlled the buffer creation so it has to be properly aligned */
+ pRdyMsg = (HTC_READY_MSG *)pPacket->pBuffer;
+
+ if ((pRdyMsg->MessageID != HTC_MSG_READY_ID) ||
+ (pPacket->ActualLength < sizeof(HTC_READY_MSG))) {
+ /* this message is not valid */
+ AR_DEBUG_ASSERT(FALSE);
+ status = A_EPROTO;
+ break;
+ }
+
+ if (pRdyMsg->CreditCount == 0 || pRdyMsg->CreditSize == 0) {
+ /* this message is not valid */
+ AR_DEBUG_ASSERT(FALSE);
+ status = A_EPROTO;
+ break;
+ }
+
+ target->TargetCredits = pRdyMsg->CreditCount;
+ target->TargetCreditSize = pRdyMsg->CreditSize;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Target Ready: credits: %d credit size: %d\n",
+ target->TargetCredits, target->TargetCreditSize));
+
+ /* setup our pseudo HTC control endpoint connection */
+ A_MEMZERO(&connect,sizeof(connect));
+ A_MEMZERO(&resp,sizeof(resp));
+ connect.EpCallbacks.pContext = target;
+ connect.EpCallbacks.EpTxComplete = HTCControlTxComplete;
+ connect.EpCallbacks.EpRecv = HTCControlRecv;
+ connect.EpCallbacks.EpRecvRefill = NULL; /* not needed */
+ connect.EpCallbacks.EpSendFull = NULL; /* not needed */
+ connect.EpCallbacks.EpSendAvail = NULL; /* not needed */
+ connect.MaxSendQueueDepth = NUM_CONTROL_BUFFERS;
+ connect.ServiceID = HTC_CTRL_RSVD_SVC;
+
+ /* connect fake service */
+ status = HTCConnectService((HTC_HANDLE)target,
+ &connect,
+ &resp);
+
+ if (!A_FAILED(status)) {
+ break;
+ }
+
+ } while (FALSE);
+
+ if (pPacket != NULL) {
+ HTC_FREE_CONTROL_RX(target,pPacket);
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Exit\n"));
+
+ return status;
+}
+
+
+
+/* Start HTC, enable interrupts and let the target know host has finished setup */
+A_STATUS HTCStart(HTC_HANDLE HTCHandle)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ HTC_PACKET *pPacket;
+ A_STATUS status;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Enter\n"));
+
+ /* now that we are starting, push control receive buffers into the
+ * HTC control endpoint */
+
+ while (1) {
+ pPacket = HTC_ALLOC_CONTROL_RX(target);
+ if (NULL == pPacket) {
+ break;
+ }
+ HTCAddReceivePkt((HTC_HANDLE)target,pPacket);
+ }
+
+ do {
+
+ AR_DEBUG_ASSERT(target->InitCredits != NULL);
+ AR_DEBUG_ASSERT(target->EpCreditDistributionListHead != NULL);
+ AR_DEBUG_ASSERT(target->EpCreditDistributionListHead->pNext != NULL);
+
+ /* call init credits callback to do the distribution ,
+ * NOTE: the first entry in the distribution list is ENDPOINT_0, so
+ * we pass the start of the list after this one. */
+ target->InitCredits(target->pCredDistContext,
+ target->EpCreditDistributionListHead->pNext,
+ target->TargetCredits);
+
+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_TRC)) {
+ DumpCreditDistStates(target);
+ }
+
+ /* the caller is done connecting to services, so we can indicate to the
+ * target that the setup phase is complete */
+ status = HTCSendSetupComplete(target);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* unmask interrupts */
+ status = DevUnmaskInterrupts(&target->Device);
+
+ if (A_FAILED(status)) {
+ HTCStop(target);
+ }
+
+ } while (FALSE);
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Exit\n"));
+ return status;
+}
+
+
+/* stop HTC communications, i.e. stop interrupt reception, and flush all queued buffers */
+void HTCStop(HTC_HANDLE HTCHandle)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCStop \n"));
+
+ /* mark that we are shutting down .. */
+ target->HTCStateFlags |= HTC_STATE_STOPPING;
+
+ /* Masking interrupts is a synchronous operation, when this function returns
+ * all pending HIF I/O has completed, we can safely flush the queues */
+ DevMaskInterrupts(&target->Device);
+
+ /* flush all send packets */
+ HTCFlushSendPkts(target);
+ /* flush all recv buffers */
+ HTCFlushRecvBuffers(target);
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCStop \n"));
+}
+
+/* undo what was done in HTCInit() */
+void HTCShutDown(void)
+{
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCShutDown: \n"));
+ HTCInitialized = FALSE;
+ /* undo HTCInit */
+ HIFShutDownDevice(NULL);
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCShutDown: \n"));
+}
+
+void HTCDumpCreditStates(HTC_HANDLE HTCHandle)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+
+ LOCK_HTC_TX(target);
+
+ DumpCreditDistStates(target);
+
+ UNLOCK_HTC_TX(target);
+}
+
+/* report a target failure from the device, this is a callback from the device layer
+ * which uses a mechanism to report errors from the target (i.e. special interrupts) */
+static void HTCReportFailure(void *Context)
+{
+ HTC_TARGET *target = (HTC_TARGET *)Context;
+
+ target->TargetFailure = TRUE;
+
+ if ((target->pInstanceContext != NULL) && (HTCInitInfo.TargetFailure != NULL)) {
+ /* let upper layer know, it needs to call HTCStop() */
+ HTCInitInfo.TargetFailure(target->pInstanceContext, A_ERROR);
+ }
+}
+
+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription)
+{
+ A_CHAR stream[60];
+ A_UINT32 i;
+ A_UINT16 offset, count;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<---------Dumping %d Bytes : %s ------>\n", length, pDescription));
+
+ count = 0;
+ offset = 0;
+ for(i = 0; i < length; i++) {
+ sprintf(stream + offset, "%2.2X ", buffer[i]);
+ count ++;
+ offset += 3;
+
+ if(count == 16) {
+ count = 0;
+ offset = 0;
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
+ A_MEMZERO(stream, 60);
+ }
+ }
+
+ if(offset != 0) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream));
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<------------------------------------------------->\n"));
+}
+
+A_BOOL HTCGetEndpointStatistics(HTC_HANDLE HTCHandle,
+ HTC_ENDPOINT_ID Endpoint,
+ HTC_ENDPOINT_STAT_ACTION Action,
+ HTC_ENDPOINT_STATS *pStats)
+{
+
+#ifdef HTC_EP_STAT_PROFILING
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ A_BOOL clearStats = FALSE;
+ A_BOOL sample = FALSE;
+
+ switch (Action) {
+ case HTC_EP_STAT_SAMPLE :
+ sample = TRUE;
+ break;
+ case HTC_EP_STAT_SAMPLE_AND_CLEAR :
+ sample = TRUE;
+ clearStats = TRUE;
+ break;
+ case HTC_EP_STAT_CLEAR :
+ clearStats = TRUE;
+ break;
+ default:
+ break;
+ }
+
+ A_ASSERT(Endpoint < ENDPOINT_MAX);
+
+ /* lock out TX and RX while we sample and/or clear */
+ LOCK_HTC_TX(target);
+ LOCK_HTC_RX(target);
+
+ if (sample) {
+ A_ASSERT(pStats != NULL);
+ /* return the stats to the caller */
+ A_MEMCPY(pStats, &target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
+ }
+
+ if (clearStats) {
+ /* reset stats */
+ A_MEMZERO(&target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS));
+ }
+
+ UNLOCK_HTC_RX(target);
+ UNLOCK_HTC_TX(target);
+
+ return TRUE;
+#else
+ return FALSE;
+#endif
+}
--- /dev/null
+#ifndef HTC_DEBUG_H_
+#define HTC_DEBUG_H_
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/* ------- Debug related stuff ------- */
+enum {
+ ATH_DEBUG_SEND = 0x0001,
+ ATH_DEBUG_RECV = 0x0002,
+ ATH_DEBUG_SYNC = 0x0004,
+ ATH_DEBUG_DUMP = 0x0008,
+ ATH_DEBUG_IRQ = 0x0010,
+ ATH_DEBUG_TRC = 0x0020,
+ ATH_DEBUG_WARN = 0x0040,
+ ATH_DEBUG_ERR = 0x0080,
+ ATH_DEBUG_ANY = 0xFFFF,
+};
+
+#ifdef DEBUG
+
+// TODO FIX usage of A_PRINTF!
+#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl))
+#define AR_DEBUG_PRINTBUF(buffer, length, desc) do { \
+ if (debughtc & ATH_DEBUG_DUMP) { \
+ DebugDumpBytes(buffer, length,desc); \
+ } \
+} while(0)
+#define PRINTX_ARG(arg...) arg
+#define AR_DEBUG_PRINTF(flags, args) do { \
+ if (debughtc & (flags)) { \
+ A_PRINTF(KERN_ALERT PRINTX_ARG args); \
+ } \
+} while (0)
+#define AR_DEBUG_ASSERT(test) do { \
+ if (!(test)) { \
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test)); \
+ } \
+} while(0)
+extern int debughtc;
+#else
+#define AR_DEBUG_PRINTF(flags, args)
+#define AR_DEBUG_PRINTBUF(buffer, length, desc)
+#define AR_DEBUG_ASSERT(test)
+#define AR_DEBUG_LVL_CHECK(lvl) 0
+#endif
+
+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
+
+#endif /*HTC_DEBUG_H_*/
--- /dev/null
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _HTC_INTERNAL_H_
+#define _HTC_INTERNAL_H_
+
+/* for debugging, uncomment this to capture the last frame header, on frame header
+ * processing errors, the last frame header is dump for comparison */
+//#define HTC_CAPTURE_LAST_FRAME
+
+//#define HTC_EP_STAT_PROFILING
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "htc.h"
+#include "htc_api.h"
+#include "bmi_msg.h"
+#include "hif.h"
+#include "ar6k.h"
+
+/* HTC operational parameters */
+#define HTC_TARGET_RESPONSE_TIMEOUT 2000 /* in ms */
+#define HTC_TARGET_DEBUG_INTR_MASK 0x01
+#define HTC_TARGET_CREDIT_INTR_MASK 0xF0
+
+typedef struct _HTC_ENDPOINT {
+ HTC_SERVICE_ID ServiceID; /* service ID this endpoint is bound to
+ non-zero value means this endpoint is in use */
+ HTC_PACKET_QUEUE TxQueue; /* HTC frame buffer TX queue */
+ HTC_PACKET_QUEUE RxBuffers; /* HTC frame buffer RX list */
+ HTC_ENDPOINT_CREDIT_DIST CreditDist; /* credit distribution structure (exposed to driver layer) */
+ HTC_EP_CALLBACKS EpCallBacks; /* callbacks associated with this endpoint */
+ int MaxTxQueueDepth; /* max depth of the TX queue before we need to
+ call driver's full handler */
+ int CurrentTxQueueDepth; /* current TX queue depth */
+ int MaxMsgLength; /* max length of endpoint message */
+#ifdef HTC_EP_STAT_PROFILING
+ HTC_ENDPOINT_STATS EndPointStats; /* endpoint statistics */
+#endif
+} HTC_ENDPOINT;
+
+#ifdef HTC_EP_STAT_PROFILING
+#define INC_HTC_EP_STAT(p,stat,count) (p)->EndPointStats.stat += (count);
+#else
+#define INC_HTC_EP_STAT(p,stat,count)
+#endif
+
+#define HTC_SERVICE_TX_PACKET_TAG HTC_TX_PACKET_TAG_INTERNAL
+
+#define NUM_CONTROL_BUFFERS 8
+#define NUM_CONTROL_TX_BUFFERS 2
+#define NUM_CONTROL_RX_BUFFERS (NUM_CONTROL_BUFFERS - NUM_CONTROL_TX_BUFFERS)
+
+#define HTC_CONTROL_BUFFER_SIZE (HTC_MAX_CONTROL_MESSAGE_LENGTH + HTC_HDR_LENGTH)
+
+typedef struct HTC_CONTROL_BUFFER {
+ HTC_PACKET HtcPacket;
+ A_UINT8 Buffer[HTC_CONTROL_BUFFER_SIZE];
+} HTC_CONTROL_BUFFER;
+
+/* our HTC target state */
+typedef struct _HTC_TARGET {
+ HTC_ENDPOINT EndPoint[ENDPOINT_MAX];
+ HTC_CONTROL_BUFFER HTCControlBuffers[NUM_CONTROL_BUFFERS];
+ HTC_ENDPOINT_CREDIT_DIST *EpCreditDistributionListHead;
+ HTC_PACKET_QUEUE ControlBufferTXFreeList;
+ HTC_PACKET_QUEUE ControlBufferRXFreeList;
+ HTC_CREDIT_DIST_CALLBACK DistributeCredits;
+ HTC_CREDIT_INIT_CALLBACK InitCredits;
+ void *pCredDistContext;
+ int TargetCredits;
+ int TargetCreditSize;
+ A_MUTEX_T HTCLock;
+ A_MUTEX_T HTCRxLock;
+ A_MUTEX_T HTCTxLock;
+ AR6K_DEVICE Device; /* AR6K - specific state */
+ A_UINT32 HTCStateFlags;
+ HTC_ENDPOINT_ID EpWaitingForBuffers;
+ A_BOOL TargetFailure;
+ void *pInstanceContext;
+#define HTC_STATE_WAIT_BUFFERS (1 << 0)
+#define HTC_STATE_STOPPING (1 << 1)
+#ifdef HTC_CAPTURE_LAST_FRAME
+ HTC_FRAME_HDR LastFrameHdr; /* useful for debugging */
+ A_UINT8 LastTrailer[256];
+ A_UINT8 LastTrailerLength;
+#endif
+} HTC_TARGET;
+
+#define HTC_STOPPING(t) ((t)->HTCStateFlags & HTC_STATE_STOPPING)
+#define LOCK_HTC(t) A_MUTEX_LOCK(&(t)->HTCLock);
+#define UNLOCK_HTC(t) A_MUTEX_UNLOCK(&(t)->HTCLock);
+#define LOCK_HTC_RX(t) A_MUTEX_LOCK(&(t)->HTCRxLock);
+#define UNLOCK_HTC_RX(t) A_MUTEX_UNLOCK(&(t)->HTCRxLock);
+#define LOCK_HTC_TX(t) A_MUTEX_LOCK(&(t)->HTCTxLock);
+#define UNLOCK_HTC_TX(t) A_MUTEX_UNLOCK(&(t)->HTCTxLock);
+
+#define GET_HTC_TARGET_FROM_HANDLE(hnd) ((HTC_TARGET *)(hnd))
+#define HTC_RECYCLE_RX_PKT(target,p) \
+{ \
+ HTC_PACKET_RESET_RX(pPacket); \
+ HTCAddReceivePkt((HTC_HANDLE)(target),(p)); \
+}
+
+/* internal HTC functions */
+void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket);
+void HTCControlRecv(void *Context, HTC_PACKET *pPacket);
+A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket);
+HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList);
+void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList);
+A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 Flags);
+A_STATUS HTCIssueRecv(HTC_TARGET *target, HTC_PACKET *pPacket);
+void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket);
+A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc);
+void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint);
+A_STATUS HTCSendSetupComplete(HTC_TARGET *target);
+void HTCFlushRecvBuffers(HTC_TARGET *target);
+void HTCFlushSendPkts(HTC_TARGET *target);
+void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist);
+void DumpCreditDistStates(HTC_TARGET *target);
+void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription);
+
+static INLINE HTC_PACKET *HTC_ALLOC_CONTROL_TX(HTC_TARGET *target) {
+ HTC_PACKET *pPacket = HTCAllocControlBuffer(target,&target->ControlBufferTXFreeList);
+ if (pPacket != NULL) {
+ /* set payload pointer area with some headroom */
+ pPacket->pBuffer = pPacket->pBufferStart + HTC_HDR_LENGTH;
+ }
+ return pPacket;
+}
+
+#define HTC_FREE_CONTROL_TX(t,p) HTCFreeControlBuffer((t),(p),&(t)->ControlBufferTXFreeList)
+#define HTC_ALLOC_CONTROL_RX(t) HTCAllocControlBuffer((t),&(t)->ControlBufferRXFreeList)
+#define HTC_FREE_CONTROL_RX(t,p) \
+{ \
+ HTC_PACKET_RESET_RX(p); \
+ HTCFreeControlBuffer((t),(p),&(t)->ControlBufferRXFreeList); \
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HTC_INTERNAL_H_ */
--- /dev/null
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+#define HTCIssueRecv(t, p) \
+ DevRecvPacket(&(t)->Device, \
+ (p), \
+ (p)->ActualLength)
+
+#define DO_RCV_COMPLETION(t,p,e) \
+{ \
+ if ((p)->ActualLength > 0) { \
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" completing packet 0x%X (%d bytes) on ep : %d \n", \
+ (A_UINT32)(p), (p)->ActualLength, (p)->Endpoint)); \
+ (e)->EpCallBacks.EpRecv((e)->EpCallBacks.pContext, \
+ (p)); \
+ } else { \
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" recycling empty packet \n")); \
+ HTC_RECYCLE_RX_PKT((t), (p)); \
+ } \
+}
+
+#ifdef HTC_EP_STAT_PROFILING
+#define HTC_RX_STAT_PROFILE(t,ep,lookAhead) \
+{ \
+ LOCK_HTC_RX((t)); \
+ INC_HTC_EP_STAT((ep), RxReceived, 1); \
+ if ((lookAhead) != 0) { \
+ INC_HTC_EP_STAT((ep), RxLookAheads, 1); \
+ } \
+ UNLOCK_HTC_RX((t)); \
+}
+#else
+#define HTC_RX_STAT_PROFILE(t,ep,lookAhead)
+#endif
+
+static INLINE A_STATUS HTCProcessTrailer(HTC_TARGET *target,
+ A_UINT8 *pBuffer,
+ int Length,
+ A_UINT32 *pNextLookAhead,
+ HTC_ENDPOINT_ID FromEndpoint)
+{
+ HTC_RECORD_HDR *pRecord;
+ A_UINT8 *pRecordBuf;
+ HTC_LOOKAHEAD_REPORT *pLookAhead;
+ A_UINT8 *pOrigBuffer;
+ int origLength;
+ A_STATUS status;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessTrailer (length:%d) \n", Length));
+
+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+ AR_DEBUG_PRINTBUF(pBuffer,Length,"Recv Trailer");
+ }
+
+ pOrigBuffer = pBuffer;
+ origLength = Length;
+ status = A_OK;
+
+ while (Length > 0) {
+
+ if (Length < sizeof(HTC_RECORD_HDR)) {
+ status = A_EPROTO;
+ break;
+ }
+ /* these are byte aligned structs */
+ pRecord = (HTC_RECORD_HDR *)pBuffer;
+ Length -= sizeof(HTC_RECORD_HDR);
+ pBuffer += sizeof(HTC_RECORD_HDR);
+
+ if (pRecord->Length > Length) {
+ /* no room left in buffer for record */
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ (" invalid record length: %d (id:%d) buffer has: %d bytes left \n",
+ pRecord->Length, pRecord->RecordID, Length));
+ status = A_EPROTO;
+ break;
+ }
+ /* start of record follows the header */
+ pRecordBuf = pBuffer;
+
+ switch (pRecord->RecordID) {
+ case HTC_RECORD_CREDITS:
+ AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_CREDIT_REPORT));
+ HTCProcessCreditRpt(target,
+ (HTC_CREDIT_REPORT *)pRecordBuf,
+ pRecord->Length / (sizeof(HTC_CREDIT_REPORT)),
+ FromEndpoint);
+ break;
+ case HTC_RECORD_LOOKAHEAD:
+ AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_LOOKAHEAD_REPORT));
+ pLookAhead = (HTC_LOOKAHEAD_REPORT *)pRecordBuf;
+ if ((pLookAhead->PreValid == ((~pLookAhead->PostValid) & 0xFF)) &&
+ (pNextLookAhead != NULL)) {
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+ (" LookAhead Report Found (pre valid:0x%X, post valid:0x%X) \n",
+ pLookAhead->PreValid,
+ pLookAhead->PostValid));
+
+ /* look ahead bytes are valid, copy them over */
+ ((A_UINT8 *)pNextLookAhead)[0] = pLookAhead->LookAhead[0];
+ ((A_UINT8 *)pNextLookAhead)[1] = pLookAhead->LookAhead[1];
+ ((A_UINT8 *)pNextLookAhead)[2] = pLookAhead->LookAhead[2];
+ ((A_UINT8 *)pNextLookAhead)[3] = pLookAhead->LookAhead[3];
+
+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+ DebugDumpBytes((A_UINT8 *)pNextLookAhead,4,"Next Look Ahead");
+ }
+ }
+ break;
+ default:
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" unhandled record: id:%d length:%d \n",
+ pRecord->RecordID, pRecord->Length));
+ break;
+ }
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* advance buffer past this record for next time around */
+ pBuffer += pRecord->Length;
+ Length -= pRecord->Length;
+ }
+
+ if (A_FAILED(status)) {
+ DebugDumpBytes(pOrigBuffer,origLength,"BAD Recv Trailer");
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessTrailer \n"));
+ return status;
+
+}
+
+/* process a received message (i.e. strip off header, process any trailer data)
+ * note : locks must be released when this function is called */
+static A_STATUS HTCProcessRecvHeader(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT32 *pNextLookAhead)
+{
+ A_UINT8 temp;
+ A_UINT8 *pBuf;
+ A_STATUS status = A_OK;
+ A_UINT16 payloadLen;
+ A_UINT32 lookAhead;
+
+ pBuf = pPacket->pBuffer;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessRecvHeader \n"));
+
+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+ AR_DEBUG_PRINTBUF(pBuf,pPacket->ActualLength,"HTC Recv PKT");
+ }
+
+ do {
+ /* note, we cannot assume the alignment of pBuffer, so we use the safe macros to
+ * retrieve 16 bit fields */
+ payloadLen = A_GET_UINT16_FIELD(pBuf, HTC_FRAME_HDR, PayloadLen);
+
+ ((A_UINT8 *)&lookAhead)[0] = pBuf[0];
+ ((A_UINT8 *)&lookAhead)[1] = pBuf[1];
+ ((A_UINT8 *)&lookAhead)[2] = pBuf[2];
+ ((A_UINT8 *)&lookAhead)[3] = pBuf[3];
+
+ if (lookAhead != pPacket->HTCReserved) {
+ /* somehow the lookahead that gave us the full read length did not
+ * reflect the actual header in the pending message */
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("HTCProcessRecvHeader, lookahead mismatch! \n"));
+ DebugDumpBytes((A_UINT8 *)&pPacket->HTCReserved,4,"Expected Message LookAhead");
+ DebugDumpBytes(pBuf,sizeof(HTC_FRAME_HDR),"Current Frame Header");
+#ifdef HTC_CAPTURE_LAST_FRAME
+ DebugDumpBytes((A_UINT8 *)&target->LastFrameHdr,sizeof(HTC_FRAME_HDR),"Last Frame Header");
+ if (target->LastTrailerLength != 0) {
+ DebugDumpBytes(target->LastTrailer,
+ target->LastTrailerLength,
+ "Last trailer");
+ }
+#endif
+ status = A_EPROTO;
+ break;
+ }
+
+ /* get flags */
+ temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, Flags);
+
+ if (temp & HTC_FLAGS_RECV_TRAILER) {
+ /* this packet has a trailer */
+
+ /* extract the trailer length in control byte 0 */
+ temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, ControlBytes[0]);
+
+ if ((temp < sizeof(HTC_RECORD_HDR)) || (temp > payloadLen)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("HTCProcessRecvHeader, invalid header (payloadlength should be :%d, CB[0] is:%d) \n",
+ payloadLen, temp));
+ status = A_EPROTO;
+ break;
+ }
+
+ /* process trailer data that follows HDR + application payload */
+ status = HTCProcessTrailer(target,
+ (pBuf + HTC_HDR_LENGTH + payloadLen - temp),
+ temp,
+ pNextLookAhead,
+ pPacket->Endpoint);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+#ifdef HTC_CAPTURE_LAST_FRAME
+ A_MEMCPY(target->LastTrailer, (pBuf + HTC_HDR_LENGTH + payloadLen - temp), temp);
+ target->LastTrailerLength = temp;
+#endif
+ /* trim length by trailer bytes */
+ pPacket->ActualLength -= temp;
+ }
+#ifdef HTC_CAPTURE_LAST_FRAME
+ else {
+ target->LastTrailerLength = 0;
+ }
+#endif
+
+ /* if we get to this point, the packet is good */
+ /* remove header and adjust length */
+ pPacket->pBuffer += HTC_HDR_LENGTH;
+ pPacket->ActualLength -= HTC_HDR_LENGTH;
+
+ } while (FALSE);
+
+ if (A_FAILED(status)) {
+ /* dump the whole packet */
+ DebugDumpBytes(pBuf,pPacket->ActualLength,"BAD HTC Recv PKT");
+ } else {
+#ifdef HTC_CAPTURE_LAST_FRAME
+ A_MEMCPY(&target->LastFrameHdr,pBuf,sizeof(HTC_FRAME_HDR));
+#endif
+ if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) {
+ if (pPacket->ActualLength > 0) {
+ AR_DEBUG_PRINTBUF(pPacket->pBuffer,pPacket->ActualLength,"HTC - Application Msg");
+ }
+ }
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessRecvHeader \n"));
+ return status;
+}
+
+/* asynchronous completion handler for recv packet fetching, when the device layer
+ * completes a read request, it will call this completion handler */
+void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket)
+{
+ HTC_TARGET *target = (HTC_TARGET *)Context;
+ HTC_ENDPOINT *pEndpoint;
+ A_UINT32 nextLookAhead = 0;
+ A_STATUS status;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCRecvCompleteHandler (status:%d, ep:%d) \n",
+ pPacket->Status, pPacket->Endpoint));
+
+ AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
+ pEndpoint = &target->EndPoint[pPacket->Endpoint];
+ pPacket->Completion = NULL;
+
+ /* get completion status */
+ status = pPacket->Status;
+
+ do {
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HTCRecvCompleteHandler: request failed (status:%d, ep:%d) \n",
+ pPacket->Status, pPacket->Endpoint));
+ break;
+ }
+ /* process the header for any trailer data */
+ status = HTCProcessRecvHeader(target,pPacket,&nextLookAhead);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+ /* was there a lookahead for the next packet? */
+ if (nextLookAhead != 0) {
+ A_STATUS nextStatus;
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+ ("HTCRecvCompleteHandler - next look ahead was non-zero : 0x%X \n",
+ nextLookAhead));
+ /* we have another packet, get the next packet fetch started (pipelined) before
+ * we call into the endpoint's callback, this will start another async request */
+ nextStatus = HTCRecvMessagePendingHandler(target,nextLookAhead,NULL);
+ if (A_EPROTO == nextStatus) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Next look ahead from recv header was INVALID\n"));
+ DebugDumpBytes((A_UINT8 *)&nextLookAhead,
+ 4,
+ "BAD lookahead from lookahead report");
+ }
+ } else {
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+ ("HTCRecvCompleteHandler - rechecking for more messages...\n"));
+ /* if we did not get anything on the look-ahead,
+ * call device layer to asynchronously re-check for messages. If we can keep the async
+ * processing going we get better performance. If there is a pending message we will keep processing
+ * messages asynchronously which should pipeline things nicely */
+ DevCheckPendingRecvMsgsAsync(&target->Device);
+ }
+
+ HTC_RX_STAT_PROFILE(target,pEndpoint,nextLookAhead);
+ DO_RCV_COMPLETION(target,pPacket,pEndpoint);
+
+ } while (FALSE);
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("HTCRecvCompleteHandler , message fetch failed (status = %d) \n",
+ status));
+ /* recyle this packet */
+ HTC_RECYCLE_RX_PKT(target, pPacket);
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCRecvCompleteHandler\n"));
+}
+
+/* synchronously wait for a control message from the target,
+ * This function is used at initialization time ONLY. At init messages
+ * on ENDPOINT 0 are expected. */
+A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket)
+{
+ A_STATUS status;
+ A_UINT32 lookAhead;
+ HTC_PACKET *pPacket = NULL;
+ HTC_FRAME_HDR *pHdr;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCWaitforControlMessage \n"));
+
+ do {
+
+ *ppControlPacket = NULL;
+
+ /* call the polling function to see if we have a message */
+ status = DevPollMboxMsgRecv(&target->Device,
+ &lookAhead,
+ HTC_TARGET_RESPONSE_TIMEOUT);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,
+ ("HTCWaitforControlMessage : lookAhead : 0x%X \n", lookAhead));
+
+ /* check the lookahead */
+ pHdr = (HTC_FRAME_HDR *)&lookAhead;
+
+ if (pHdr->EndpointID != ENDPOINT_0) {
+ /* unexpected endpoint number, should be zero */
+ AR_DEBUG_ASSERT(FALSE);
+ status = A_EPROTO;
+ break;
+ }
+
+ if (A_FAILED(status)) {
+ /* bad message */
+ AR_DEBUG_ASSERT(FALSE);
+ status = A_EPROTO;
+ break;
+ }
+
+ pPacket = HTC_ALLOC_CONTROL_RX(target);
+
+ if (pPacket == NULL) {
+ AR_DEBUG_ASSERT(FALSE);
+ status = A_NO_MEMORY;
+ break;
+ }
+
+ pPacket->HTCReserved = lookAhead;
+ pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
+
+ if (pPacket->ActualLength > pPacket->BufferLength) {
+ AR_DEBUG_ASSERT(FALSE);
+ status = A_EPROTO;
+ break;
+ }
+
+ /* we want synchronous operation */
+ pPacket->Completion = NULL;
+
+ /* get the message from the device, this will block */
+ status = HTCIssueRecv(target, pPacket);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* process receive header */
+ status = HTCProcessRecvHeader(target,pPacket,NULL);
+
+ pPacket->Status = status;
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("HTCWaitforControlMessage, HTCProcessRecvHeader failed (status = %d) \n",
+ status));
+ break;
+ }
+
+ /* give the caller this control message packet, they are responsible to free */
+ *ppControlPacket = pPacket;
+
+ } while (FALSE);
+
+ if (A_FAILED(status)) {
+ if (pPacket != NULL) {
+ /* cleanup buffer on error */
+ HTC_FREE_CONTROL_RX(target,pPacket);
+ }
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCWaitforControlMessage \n"));
+
+ return status;
+}
+
+/* callback when device layer or lookahead report parsing detects a pending message */
+A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc)
+{
+ HTC_TARGET *target = (HTC_TARGET *)Context;
+ A_STATUS status = A_OK;
+ HTC_PACKET *pPacket = NULL;
+ HTC_FRAME_HDR *pHdr;
+ HTC_ENDPOINT *pEndpoint;
+ A_BOOL asyncProc = FALSE;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCRecvMessagePendingHandler LookAhead:0x%X \n",LookAhead));
+
+ if (IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(&target->Device)) {
+ /* We use async mode to get the packets if the device layer supports it.
+ * The device layer interfaces with HIF in which HIF may have restrictions on
+ * how interrupts are processed */
+ asyncProc = TRUE;
+ }
+
+ if (pAsyncProc != NULL) {
+ /* indicate to caller how we decided to process this */
+ *pAsyncProc = asyncProc;
+ }
+
+ while (TRUE) {
+
+ pHdr = (HTC_FRAME_HDR *)&LookAhead;
+
+ if (pHdr->EndpointID >= ENDPOINT_MAX) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid Endpoint in look-ahead: %d \n",pHdr->EndpointID));
+ /* invalid endpoint */
+ status = A_EPROTO;
+ break;
+ }
+
+ if (pHdr->PayloadLen > HTC_MAX_PAYLOAD_LENGTH) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Payload length %d exceeds max HTC : %d !\n",
+ pHdr->PayloadLen, HTC_MAX_PAYLOAD_LENGTH));
+ status = A_EPROTO;
+ break;
+ }
+
+ pEndpoint = &target->EndPoint[pHdr->EndpointID];
+
+ if (0 == pEndpoint->ServiceID) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Endpoint %d is not connected !\n",pHdr->EndpointID));
+ /* endpoint isn't even connected */
+ status = A_EPROTO;
+ break;
+ }
+
+ /* lock RX to get a buffer */
+ LOCK_HTC_RX(target);
+
+ /* get a packet from the endpoint recv queue */
+ pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+
+ if (NULL == pPacket) {
+ /* check for refill handler */
+ if (pEndpoint->EpCallBacks.EpRecvRefill != NULL) {
+ UNLOCK_HTC_RX(target);
+ /* call the re-fill handler */
+ pEndpoint->EpCallBacks.EpRecvRefill(pEndpoint->EpCallBacks.pContext,
+ pHdr->EndpointID);
+ LOCK_HTC_RX(target);
+ /* check if we have more buffers */
+ pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+ /* fall through */
+ }
+ }
+
+ if (NULL == pPacket) {
+ /* this is not an error, we simply need to mark that we are waiting for buffers.*/
+ target->HTCStateFlags |= HTC_STATE_WAIT_BUFFERS;
+ target->EpWaitingForBuffers = pHdr->EndpointID;
+ status = A_NO_MEMORY;
+ }
+
+ UNLOCK_HTC_RX(target);
+
+ if (A_FAILED(status)) {
+ /* no buffers */
+ break;
+ }
+
+ AR_DEBUG_ASSERT(pPacket->Endpoint == pHdr->EndpointID);
+
+ /* make sure this message can fit in the endpoint buffer */
+ if ((pHdr->PayloadLen + HTC_HDR_LENGTH) > pPacket->BufferLength) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Payload Length Error : header reports payload of: %d, endpoint buffer size: %d \n",
+ pHdr->PayloadLen, pPacket->BufferLength));
+ status = A_EPROTO;
+ break;
+ }
+
+ pPacket->HTCReserved = LookAhead; /* set expected look ahead */
+ /* set the amount of data to fetch */
+ pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH;
+
+ if (asyncProc) {
+ /* we use async mode to get the packet if the device layer supports it
+ * set our callback and context */
+ pPacket->Completion = HTCRecvCompleteHandler;
+ pPacket->pContext = target;
+ } else {
+ /* fully synchronous */
+ pPacket->Completion = NULL;
+ }
+
+ /* go fetch the packet */
+ status = HTCIssueRecv(target, pPacket);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ if (asyncProc) {
+ /* we did this asynchronously so we can get out of the loop, the asynch processing
+ * creates a chain of requests to continue processing pending messages in the
+ * context of callbacks */
+ break;
+ }
+
+ /* in the sync case, we process the packet, check lookaheads and then repeat */
+
+ LookAhead = 0;
+ status = HTCProcessRecvHeader(target,pPacket,&LookAhead);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ HTC_RX_STAT_PROFILE(target,pEndpoint,LookAhead);
+ DO_RCV_COMPLETION(target,pPacket,pEndpoint);
+
+ pPacket = NULL;
+
+ if (0 == LookAhead) {
+ break;
+ }
+
+ }
+
+ if (A_NO_MEMORY == status) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ (" Endpoint :%d has no buffers, blocking receiver to prevent overrun.. \n",
+ pHdr->EndpointID));
+ /* try to stop receive at the device layer */
+ DevStopRecv(&target->Device, asyncProc ? DEV_STOP_RECV_ASYNC : DEV_STOP_RECV_SYNC);
+ status = A_OK;
+ } else if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Failed to get pending message : LookAhead Value: 0x%X (status = %d) \n",
+ LookAhead, status));
+ if (pPacket != NULL) {
+ /* clean up packet on error */
+ HTC_RECYCLE_RX_PKT(target, pPacket);
+ }
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCRecvMessagePendingHandler \n"));
+
+ return status;
+}
+
+/* Makes a buffer available to the HTC module */
+A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ HTC_ENDPOINT *pEndpoint;
+ A_BOOL unblockRecv = FALSE;
+ A_STATUS status = A_OK;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+ ("+- HTCAddReceivePkt: endPointId: %d, buffer: 0x%X, length: %d\n",
+ pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->BufferLength));
+
+ do {
+
+ if (HTC_STOPPING(target)) {
+ status = A_ECANCELED;
+ break;
+ }
+
+ AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX);
+
+ pEndpoint = &target->EndPoint[pPacket->Endpoint];
+
+ LOCK_HTC_RX(target);
+
+ /* store receive packet */
+ HTC_PACKET_ENQUEUE(&pEndpoint->RxBuffers, pPacket);
+
+ /* check if we are blocked waiting for a new buffer */
+ if (target->HTCStateFlags & HTC_STATE_WAIT_BUFFERS) {
+ if (target->EpWaitingForBuffers == pPacket->Endpoint) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" receiver was blocked on ep:%d, unblocking.. \n",
+ target->EpWaitingForBuffers));
+ target->HTCStateFlags &= ~HTC_STATE_WAIT_BUFFERS;
+ target->EpWaitingForBuffers = ENDPOINT_MAX;
+ unblockRecv = TRUE;
+ }
+ }
+
+ UNLOCK_HTC_RX(target);
+
+ if (unblockRecv && !HTC_STOPPING(target)) {
+ /* TODO : implement a buffer threshold count? */
+ DevEnableRecv(&target->Device,DEV_ENABLE_RECV_SYNC);
+ }
+
+ } while (FALSE);
+
+ return status;
+}
+
+static void HTCFlushEndpointRX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint)
+{
+ HTC_PACKET *pPacket;
+
+ LOCK_HTC_RX(target);
+
+ while (1) {
+ pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers);
+ if (NULL == pPacket) {
+ break;
+ }
+ UNLOCK_HTC_RX(target);
+ pPacket->Status = A_ECANCELED;
+ pPacket->ActualLength = 0;
+ AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" Flushing RX packet:0x%X, length:%d, ep:%d \n",
+ (A_UINT32)pPacket, pPacket->BufferLength, pPacket->Endpoint));
+ /* give the packet back */
+ pEndpoint->EpCallBacks.EpRecv(pEndpoint->EpCallBacks.pContext,
+ pPacket);
+ LOCK_HTC_RX(target);
+ }
+
+ UNLOCK_HTC_RX(target);
+
+
+}
+
+void HTCFlushRecvBuffers(HTC_TARGET *target)
+{
+ HTC_ENDPOINT *pEndpoint;
+ int i;
+
+ /* NOTE: no need to flush endpoint 0, these buffers were
+ * allocated as part of the HTC struct */
+ for (i = ENDPOINT_1; i < ENDPOINT_MAX; i++) {
+ pEndpoint = &target->EndPoint[i];
+ if (pEndpoint->ServiceID == 0) {
+ /* not in use.. */
+ continue;
+ }
+ HTCFlushEndpointRX(target,pEndpoint);
+ }
+
+
+}
+
+
--- /dev/null
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+#define DO_EP_TX_COMPLETION(ep,p) \
+{ \
+ (p)->Completion = NULL; \
+ (ep)->EpCallBacks.EpTxComplete((ep)->EpCallBacks.pContext,(p)); \
+}
+
+
+/* call the distribute credits callback with the distribution */
+#define DO_DISTRIBUTION(t,reason,description,pList) \
+{ \
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, \
+ (" calling distribute function (%s) (dfn:0x%X, ctxt:0x%X, dist:0x%X) \n", \
+ (description), \
+ (A_UINT32)(t)->DistributeCredits, \
+ (A_UINT32)(t)->pCredDistContext, \
+ (A_UINT32)pList)); \
+ (t)->DistributeCredits((t)->pCredDistContext, \
+ (pList), \
+ (reason)); \
+}
+
+/* our internal send packet completion handler when packets are submited to the AR6K device
+ * layer */
+static void HTCSendPktCompletionHandler(void *Context, HTC_PACKET *pPacket)
+{
+ HTC_TARGET *target = (HTC_TARGET *)Context;
+ HTC_ENDPOINT *pEndpoint = &target->EndPoint[pPacket->Endpoint];
+
+
+ if (A_FAILED(pPacket->Status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("HTCSendPktCompletionHandler: request failed (status:%d, ep:%d) \n",
+ pPacket->Status, pPacket->Endpoint));
+ }
+ /* first, fixup the head room we allocated */
+ pPacket->pBuffer += HTC_HDR_LENGTH;
+ /* do completion */
+ DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+}
+
+A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 SendFlags)
+{
+ A_STATUS status;
+ A_UINT8 *pHdrBuf;
+ A_BOOL sync = FALSE;
+
+ /* caller always provides headrooom */
+ pPacket->pBuffer -= HTC_HDR_LENGTH;
+ pHdrBuf = pPacket->pBuffer;
+ /* setup frame header */
+ A_SET_UINT16_FIELD(pHdrBuf,HTC_FRAME_HDR,PayloadLen,(A_UINT16)pPacket->ActualLength);
+ A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,Flags,SendFlags);
+ A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,EndpointID, (A_UINT8)pPacket->Endpoint);
+
+ if (pPacket->Completion == NULL) {
+ /* mark that this request was synchronously issued */
+ sync = TRUE;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+ ("+-HTCIssueSend: transmit length : %d (%s) \n",
+ pPacket->ActualLength + HTC_HDR_LENGTH,
+ sync ? "SYNC" : "ASYNC" ));
+
+ /* send message to device */
+ status = DevSendPacket(&target->Device,
+ pPacket,
+ pPacket->ActualLength + HTC_HDR_LENGTH);
+
+ if (sync) {
+ /* use local sync variable. If this was issued asynchronously, pPacket is no longer
+ * safe to access. */
+ pPacket->pBuffer += HTC_HDR_LENGTH;
+ }
+
+ /* if this request was asynchronous, the packet completion routine will be invoked by
+ * the device layer when the HIF layer completes the request */
+
+ return status;
+}
+
+/* try to send the current packet or a packet at the head of the TX queue,
+ * if there are no credits, the packet remains in the queue. */
+static void HTCTrySend(HTC_TARGET *target,
+ HTC_PACKET *pPacketToSend,
+ HTC_ENDPOINT_ID ep)
+{
+ HTC_PACKET *pPacket;
+ HTC_ENDPOINT *pEndpoint;
+ int creditsRequired;
+ A_UINT8 sendFlags;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("+HTCTrySend (pPkt:0x%X)\n",(A_UINT32)pPacketToSend));
+
+ pEndpoint = &target->EndPoint[ep];
+
+ LOCK_HTC_TX(target);
+
+ if (pPacketToSend != NULL) {
+ /* caller supplied us a packet to queue to the tail of the HTC TX queue before
+ * we check the tx queue */
+ HTC_PACKET_ENQUEUE(&pEndpoint->TxQueue,pPacketToSend);
+ pEndpoint->CurrentTxQueueDepth++;
+ }
+
+ /* now drain the TX queue for transmission as long as we have enough
+ * credits */
+
+ while (1) {
+
+ if (HTC_QUEUE_EMPTY(&pEndpoint->TxQueue)) {
+ /* nothing in the queue */
+ break;
+ }
+
+ sendFlags = 0;
+
+ /* get packet at head, but don't remove it */
+ pPacket = HTC_GET_PKT_AT_HEAD(&pEndpoint->TxQueue);
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Got head packet:0x%X , Queue Depth: %d\n",
+ (A_UINT32)pPacket, pEndpoint->CurrentTxQueueDepth));
+
+ /* figure out how many credits this message requires */
+ creditsRequired = pPacket->ActualLength + HTC_HDR_LENGTH;
+ creditsRequired += target->TargetCreditSize - 1;
+ creditsRequired /= target->TargetCreditSize;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Creds Required:%d Got:%d\n",
+ creditsRequired, pEndpoint->CreditDist.TxCredits));
+
+ if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
+
+ /* not enough credits */
+
+ if (pPacket->Endpoint == ENDPOINT_0) {
+ /* leave it in the queue */
+ break;
+ }
+ /* invoke the registered distribution function only if this is not
+ * endpoint 0, we let the driver layer provide more credits if it can.
+ * We pass the credit distribution list starting at the endpoint in question
+ * */
+
+ /* set how many credits we need */
+ pEndpoint->CreditDist.TxCreditsSeek =
+ creditsRequired - pEndpoint->CreditDist.TxCredits;
+ DO_DISTRIBUTION(target,
+ HTC_CREDIT_DIST_SEEK_CREDITS,
+ "Seek Credits",
+ &pEndpoint->CreditDist);
+
+ pEndpoint->CreditDist.TxCreditsSeek = 0;
+
+ if (pEndpoint->CreditDist.TxCredits < creditsRequired) {
+ /* still not enough credits to send, leave packet in the queue */
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+ (" Not enough credits for ep %d leaving packet in queue..\n",
+ pPacket->Endpoint));
+ break;
+ }
+
+ }
+
+ pEndpoint->CreditDist.TxCredits -= creditsRequired;
+ INC_HTC_EP_STAT(pEndpoint, TxCreditsConsummed, creditsRequired);
+
+ /* check if we need credits */
+ if (pEndpoint->CreditDist.TxCredits < pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
+ sendFlags |= HTC_FLAGS_NEED_CREDIT_UPDATE;
+ INC_HTC_EP_STAT(pEndpoint, TxCreditLowIndications, 1);
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Host Needs Credits \n"));
+ }
+
+ /* now we can fully dequeue */
+ pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->TxQueue);
+ pEndpoint->CurrentTxQueueDepth--;
+
+ INC_HTC_EP_STAT(pEndpoint, TxIssued, 1);
+
+ UNLOCK_HTC_TX(target);
+
+ HTCIssueSend(target, pPacket, sendFlags);
+
+ LOCK_HTC_TX(target);
+
+ /* go back and check for more messages */
+ }
+
+ if (pEndpoint->CurrentTxQueueDepth >= pEndpoint->MaxTxQueueDepth) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d, TX queue is full, Depth:%d, Max:%d \n",
+ ep, pEndpoint->CurrentTxQueueDepth, pEndpoint->MaxTxQueueDepth));
+ UNLOCK_HTC_TX(target);
+ /* queue is now full, let caller know */
+ if (pEndpoint->EpCallBacks.EpSendFull != NULL) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Calling driver's send full callback.... \n"));
+ pEndpoint->EpCallBacks.EpSendFull(pEndpoint->EpCallBacks.pContext, ep);
+ }
+ } else {
+ UNLOCK_HTC_TX(target);
+ /* queue is now available for new packet, let caller know */
+ if (pEndpoint->EpCallBacks.EpSendAvail)
+ pEndpoint->EpCallBacks.EpSendAvail(pEndpoint->EpCallBacks.pContext, ep);
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("-HTCTrySend: \n"));
+}
+
+/* HTC API - HTCSendPkt */
+A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ HTC_ENDPOINT *pEndpoint;
+ HTC_ENDPOINT_ID ep;
+ A_STATUS status = A_OK;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND,
+ ("+HTCSendPkt: Enter endPointId: %d, buffer: 0x%X, length: %d \n",
+ pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->ActualLength));
+
+ ep = pPacket->Endpoint;
+ AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
+ pEndpoint = &target->EndPoint[ep];
+
+ do {
+
+ if (HTC_STOPPING(target)) {
+ status = A_ECANCELED;
+ pPacket->Status = status;
+ DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+ break;
+ }
+ /* everything sent through this interface is asynchronous */
+ /* fill in HTC completion routines */
+ pPacket->Completion = HTCSendPktCompletionHandler;
+ pPacket->pContext = target;
+
+ HTCTrySend(target, pPacket, ep);
+
+ } while (FALSE);
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCSendPkt \n"));
+
+ return status;
+}
+
+
+/* check TX queues to drain because of credit distribution update */
+static INLINE void HTCCheckEndpointTxQueues(HTC_TARGET *target)
+{
+ HTC_ENDPOINT *pEndpoint;
+ HTC_ENDPOINT_CREDIT_DIST *pDistItem;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCCheckEndpointTxQueues \n"));
+ pDistItem = target->EpCreditDistributionListHead;
+
+ /* run through the credit distribution list to see
+ * if there are packets queued
+ * NOTE: no locks need to be taken since the distribution list
+ * is not dynamic (cannot be re-ordered) and we are not modifying any state */
+ while (pDistItem != NULL) {
+ pEndpoint = (HTC_ENDPOINT *)pDistItem->pHTCReserved;
+
+ if (pEndpoint->CurrentTxQueueDepth > 0) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Ep %d has %d credits and %d Packets in TX Queue \n",
+ pDistItem->Endpoint, pEndpoint->CreditDist.TxCredits, pEndpoint->CurrentTxQueueDepth));
+ /* try to start the stalled queue, this list is ordered by priority.
+ * Highest priority queue get's processed first, if there are credits available the
+ * highest priority queue will get a chance to reclaim credits from lower priority
+ * ones */
+ HTCTrySend(target, NULL, pDistItem->Endpoint);
+ }
+
+ pDistItem = pDistItem->pNext;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCCheckEndpointTxQueues \n"));
+}
+
+/* process credit reports and call distribution function */
+void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint)
+{
+ int i;
+ HTC_ENDPOINT *pEndpoint;
+ int totalCredits = 0;
+ A_BOOL doDist = FALSE;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCProcessCreditRpt, Credit Report Entries:%d \n", NumEntries));
+
+ /* lock out TX while we update credits */
+ LOCK_HTC_TX(target);
+
+ for (i = 0; i < NumEntries; i++, pRpt++) {
+ if (pRpt->EndpointID >= ENDPOINT_MAX) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ pEndpoint = &target->EndPoint[pRpt->EndpointID];
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d got %d credits \n",
+ pRpt->EndpointID, pRpt->Credits));
+
+
+#ifdef HTC_EP_STAT_PROFILING
+
+ INC_HTC_EP_STAT(pEndpoint, TxCreditRpts, 1);
+ INC_HTC_EP_STAT(pEndpoint, TxCreditsReturned, pRpt->Credits);
+
+ if (FromEndpoint == pRpt->EndpointID) {
+ /* this credit report arrived on the same endpoint indicating it arrived in an RX
+ * packet */
+ INC_HTC_EP_STAT(pEndpoint, TxCreditsFromRx, pRpt->Credits);
+ INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromRx, 1);
+ } else if (FromEndpoint == ENDPOINT_0) {
+ /* this credit arrived on endpoint 0 as a NULL message */
+ INC_HTC_EP_STAT(pEndpoint, TxCreditsFromEp0, pRpt->Credits);
+ INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromEp0, 1);
+ } else {
+ /* arrived on another endpoint */
+ INC_HTC_EP_STAT(pEndpoint, TxCreditsFromOther, pRpt->Credits);
+ INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromOther, 1);
+ }
+
+#endif
+
+ if (ENDPOINT_0 == pRpt->EndpointID) {
+ /* always give endpoint 0 credits back */
+ pEndpoint->CreditDist.TxCredits += pRpt->Credits;
+ } else {
+ /* for all other endpoints, update credits to distribute, the distribution function
+ * will handle giving out credits back to the endpoints */
+ pEndpoint->CreditDist.TxCreditsToDist += pRpt->Credits;
+ /* flag that we have to do the distribution */
+ doDist = TRUE;
+ }
+
+ totalCredits += pRpt->Credits;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Report indicated %d credits to distribute \n", totalCredits));
+
+ if (doDist) {
+ /* this was a credit return based on a completed send operations
+ * note, this is done with the lock held */
+ DO_DISTRIBUTION(target,
+ HTC_CREDIT_DIST_SEND_COMPLETE,
+ "Send Complete",
+ target->EpCreditDistributionListHead->pNext);
+ }
+
+ UNLOCK_HTC_TX(target);
+
+ if (totalCredits) {
+ HTCCheckEndpointTxQueues(target);
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCProcessCreditRpt \n"));
+}
+
+/* flush endpoint TX queue */
+static void HTCFlushEndpointTX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint, HTC_TX_TAG Tag)
+{
+ HTC_PACKET *pPacket;
+ HTC_PACKET_QUEUE discardQueue;
+
+ /* initialize the discard queue */
+ INIT_HTC_PACKET_QUEUE(&discardQueue);
+
+ LOCK_HTC_TX(target);
+
+ /* interate from the front of the TX queue and flush out packets */
+ ITERATE_OVER_LIST_ALLOW_REMOVE(&pEndpoint->TxQueue, pPacket, HTC_PACKET, ListLink) {
+
+ /* check for removal */
+ if ((HTC_TX_PACKET_TAG_ALL == Tag) || (Tag == pPacket->PktInfo.AsTx.Tag)) {
+ /* remove from queue */
+ HTC_PACKET_REMOVE(pPacket);
+ /* add it to the discard pile */
+ HTC_PACKET_ENQUEUE(&discardQueue, pPacket);
+ pEndpoint->CurrentTxQueueDepth--;
+ }
+
+ } ITERATE_END;
+
+ UNLOCK_HTC_TX(target);
+
+ /* empty the discard queue */
+ while (1) {
+ pPacket = HTC_PACKET_DEQUEUE(&discardQueue);
+ if (NULL == pPacket) {
+ break;
+ }
+ pPacket->Status = A_ECANCELED;
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Flushing TX packet:0x%X, length:%d, ep:%d tag:0x%X \n",
+ (A_UINT32)pPacket, pPacket->ActualLength, pPacket->Endpoint, pPacket->PktInfo.AsTx.Tag));
+ DO_EP_TX_COMPLETION(pEndpoint,pPacket);
+ }
+
+}
+
+void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist)
+{
+#ifdef DEBUG
+ HTC_ENDPOINT *pEndpoint = (HTC_ENDPOINT *)pEPDist->pHTCReserved;
+#endif
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("--- EP : %d ServiceID: 0x%X --------------\n",
+ pEPDist->Endpoint, pEPDist->ServiceID));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" this:0x%X next:0x%X prev:0x%X\n",
+ (A_UINT32)pEPDist, (A_UINT32)pEPDist->pNext, (A_UINT32)pEPDist->pPrev));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" DistFlags : 0x%X \n", pEPDist->DistFlags));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsNorm : %d \n", pEPDist->TxCreditsNorm));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsMin : %d \n", pEPDist->TxCreditsMin));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCredits : %d \n", pEPDist->TxCredits));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsAssigned : %d \n", pEPDist->TxCreditsAssigned));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsSeek : %d \n", pEPDist->TxCreditsSeek));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditSize : %d \n", pEPDist->TxCreditSize));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsPerMaxMsg : %d \n", pEPDist->TxCreditsPerMaxMsg));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsToDist : %d \n", pEPDist->TxCreditsToDist));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxQueueDepth : %d \n", pEndpoint->CurrentTxQueueDepth));
+ AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("----------------------------------------------------\n"));
+}
+
+void DumpCreditDistStates(HTC_TARGET *target)
+{
+ HTC_ENDPOINT_CREDIT_DIST *pEPList = target->EpCreditDistributionListHead;
+
+ while (pEPList != NULL) {
+ DumpCreditDist(pEPList);
+ pEPList = pEPList->pNext;
+ }
+
+ if (target->DistributeCredits != NULL) {
+ DO_DISTRIBUTION(target,
+ HTC_DUMP_CREDIT_STATE,
+ "Dump State",
+ NULL);
+ }
+}
+
+/* flush all send packets from all endpoint queues */
+void HTCFlushSendPkts(HTC_TARGET *target)
+{
+ HTC_ENDPOINT *pEndpoint;
+ int i;
+
+ DumpCreditDistStates(target);
+
+ for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) {
+ pEndpoint = &target->EndPoint[i];
+ if (pEndpoint->ServiceID == 0) {
+ /* not in use.. */
+ continue;
+ }
+ HTCFlushEndpointTX(target,pEndpoint,HTC_TX_PACKET_TAG_ALL);
+ }
+
+}
+
+/* HTC API to flush an endpoint's TX queue*/
+void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ HTC_ENDPOINT *pEndpoint = &target->EndPoint[Endpoint];
+
+ if (pEndpoint->ServiceID == 0) {
+ AR_DEBUG_ASSERT(FALSE);
+ /* not in use.. */
+ return;
+ }
+
+ HTCFlushEndpointTX(target, pEndpoint, Tag);
+}
+
+/* HTC API to indicate activity to the credit distribution function */
+void HTCIndicateActivityChange(HTC_HANDLE HTCHandle,
+ HTC_ENDPOINT_ID Endpoint,
+ A_BOOL Active)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ HTC_ENDPOINT *pEndpoint = &target->EndPoint[Endpoint];
+ A_BOOL doDist = FALSE;
+
+ if (pEndpoint->ServiceID == 0) {
+ AR_DEBUG_ASSERT(FALSE);
+ /* not in use.. */
+ return;
+ }
+
+ LOCK_HTC_TX(target);
+
+ if (Active) {
+ if (!(pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE)) {
+ /* mark active now */
+ pEndpoint->CreditDist.DistFlags |= HTC_EP_ACTIVE;
+ doDist = TRUE;
+ }
+ } else {
+ if (pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE) {
+ /* mark inactive now */
+ pEndpoint->CreditDist.DistFlags &= ~HTC_EP_ACTIVE;
+ doDist = TRUE;
+ }
+ }
+
+ if (doDist) {
+ /* do distribution again based on activity change
+ * note, this is done with the lock held */
+ DO_DISTRIBUTION(target,
+ HTC_CREDIT_DIST_ACTIVITY_CHANGE,
+ "Activity Change",
+ target->EpCreditDistributionListHead->pNext);
+ }
+
+ UNLOCK_HTC_TX(target);
+
+}
--- /dev/null
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "htc_internal.h"
+
+void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket)
+{
+ /* not implemented
+ * we do not send control TX frames during normal runtime, only during setup */
+ AR_DEBUG_ASSERT(FALSE);
+}
+
+ /* callback when a control message arrives on this endpoint */
+void HTCControlRecv(void *Context, HTC_PACKET *pPacket)
+{
+ AR_DEBUG_ASSERT(pPacket->Endpoint == ENDPOINT_0);
+
+ /* the only control messages we are expecting are NULL messages (credit resports), which should
+ * never get here */
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("HTCControlRecv, got message with length:%d \n",
+ pPacket->ActualLength + HTC_HDR_LENGTH));
+
+ /* dump header and message */
+ DebugDumpBytes(pPacket->pBuffer - HTC_HDR_LENGTH,
+ pPacket->ActualLength + HTC_HDR_LENGTH,
+ "Unexpected ENDPOINT 0 Message");
+
+ HTC_RECYCLE_RX_PKT((HTC_TARGET*)Context,pPacket);
+}
+
+A_STATUS HTCSendSetupComplete(HTC_TARGET *target)
+{
+ HTC_PACKET *pSendPacket = NULL;
+ A_STATUS status;
+ HTC_SETUP_COMPLETE_MSG *pSetupComplete;
+
+ do {
+ /* allocate a packet to send to the target */
+ pSendPacket = HTC_ALLOC_CONTROL_TX(target);
+
+ if (NULL == pSendPacket) {
+ status = A_NO_MEMORY;
+ break;
+ }
+
+ /* assemble setup complete message */
+ pSetupComplete = (HTC_SETUP_COMPLETE_MSG *)pSendPacket->pBuffer;
+ A_MEMZERO(pSetupComplete,sizeof(HTC_SETUP_COMPLETE_MSG));
+ pSetupComplete->MessageID = HTC_MSG_SETUP_COMPLETE_ID;
+
+ SET_HTC_PACKET_INFO_TX(pSendPacket,
+ NULL,
+ (A_UINT8 *)pSetupComplete,
+ sizeof(HTC_SETUP_COMPLETE_MSG),
+ ENDPOINT_0,
+ HTC_SERVICE_TX_PACKET_TAG);
+
+ /* we want synchronous operation */
+ pSendPacket->Completion = NULL;
+ /* send the message */
+ status = HTCIssueSend(target,pSendPacket,0);
+
+ } while (FALSE);
+
+ if (pSendPacket != NULL) {
+ HTC_FREE_CONTROL_TX(target,pSendPacket);
+ }
+
+ return status;
+}
+
+
+A_STATUS HTCConnectService(HTC_HANDLE HTCHandle,
+ HTC_SERVICE_CONNECT_REQ *pConnectReq,
+ HTC_SERVICE_CONNECT_RESP *pConnectResp)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ A_STATUS status = A_OK;
+ HTC_PACKET *pRecvPacket = NULL;
+ HTC_PACKET *pSendPacket = NULL;
+ HTC_CONNECT_SERVICE_RESPONSE_MSG *pResponseMsg;
+ HTC_CONNECT_SERVICE_MSG *pConnectMsg;
+ HTC_ENDPOINT_ID assignedEndpoint = ENDPOINT_MAX;
+ HTC_ENDPOINT *pEndpoint;
+ int maxMsgSize = 0;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCConnectService, target:0x%X SvcID:0x%X \n",
+ (A_UINT32)target, pConnectReq->ServiceID));
+
+ do {
+
+ AR_DEBUG_ASSERT(pConnectReq->ServiceID != 0);
+
+ if (HTC_CTRL_RSVD_SVC == pConnectReq->ServiceID) {
+ /* special case for pseudo control service */
+ assignedEndpoint = ENDPOINT_0;
+ maxMsgSize = HTC_MAX_CONTROL_MESSAGE_LENGTH;
+ } else {
+ /* allocate a packet to send to the target */
+ pSendPacket = HTC_ALLOC_CONTROL_TX(target);
+
+ if (NULL == pSendPacket) {
+ AR_DEBUG_ASSERT(FALSE);
+ status = A_NO_MEMORY;
+ break;
+ }
+ /* assemble connect service message */
+ pConnectMsg = (HTC_CONNECT_SERVICE_MSG *)pSendPacket->pBuffer;
+ AR_DEBUG_ASSERT(pConnectMsg != NULL);
+ A_MEMZERO(pConnectMsg,sizeof(HTC_CONNECT_SERVICE_MSG));
+ pConnectMsg->MessageID = HTC_MSG_CONNECT_SERVICE_ID;
+ pConnectMsg->ServiceID = pConnectReq->ServiceID;
+ pConnectMsg->ConnectionFlags = pConnectReq->ConnectionFlags;
+ /* check caller if it wants to transfer meta data */
+ if ((pConnectReq->pMetaData != NULL) &&
+ (pConnectReq->MetaDataLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
+ /* copy meta data into message buffer (after header ) */
+ A_MEMCPY((A_UINT8 *)pConnectMsg + sizeof(HTC_CONNECT_SERVICE_MSG),
+ pConnectReq->pMetaData,
+ pConnectReq->MetaDataLength);
+ pConnectMsg->ServiceMetaLength = pConnectReq->MetaDataLength;
+ }
+
+ SET_HTC_PACKET_INFO_TX(pSendPacket,
+ NULL,
+ (A_UINT8 *)pConnectMsg,
+ sizeof(HTC_CONNECT_SERVICE_MSG) + pConnectMsg->ServiceMetaLength,
+ ENDPOINT_0,
+ HTC_SERVICE_TX_PACKET_TAG);
+
+ /* we want synchronous operation */
+ pSendPacket->Completion = NULL;
+
+ status = HTCIssueSend(target,pSendPacket,0);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /* wait for response */
+ status = HTCWaitforControlMessage(target, &pRecvPacket);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+ /* we controlled the buffer creation so it has to be properly aligned */
+ pResponseMsg = (HTC_CONNECT_SERVICE_RESPONSE_MSG *)pRecvPacket->pBuffer;
+
+ if ((pResponseMsg->MessageID != HTC_MSG_CONNECT_SERVICE_RESPONSE_ID) ||
+ (pRecvPacket->ActualLength < sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG))) {
+ /* this message is not valid */
+ AR_DEBUG_ASSERT(FALSE);
+ status = A_EPROTO;
+ break;
+ }
+
+ pConnectResp->ConnectRespCode = pResponseMsg->Status;
+ /* check response status */
+ if (pResponseMsg->Status != HTC_SERVICE_SUCCESS) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ (" Target failed service 0x%X connect request (status:%d)\n",
+ pResponseMsg->ServiceID, pResponseMsg->Status));
+ status = A_EPROTO;
+ break;
+ }
+
+ assignedEndpoint = pResponseMsg->EndpointID;
+ maxMsgSize = pResponseMsg->MaxMsgSize;
+
+ if ((pConnectResp->pMetaData != NULL) &&
+ (pResponseMsg->ServiceMetaLength > 0) &&
+ (pResponseMsg->ServiceMetaLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) {
+ /* caller supplied a buffer and the target responded with data */
+ int copyLength = min((int)pConnectResp->BufferLength, (int)pResponseMsg->ServiceMetaLength);
+ /* copy the meta data */
+ A_MEMCPY(pConnectResp->pMetaData,
+ ((A_UINT8 *)pResponseMsg) + sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG),
+ copyLength);
+ pConnectResp->ActualLength = copyLength;
+ }
+
+ }
+
+ /* the rest of these are parameter checks so set the error status */
+ status = A_EPROTO;
+
+ if (assignedEndpoint >= ENDPOINT_MAX) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ if (0 == maxMsgSize) {
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ pEndpoint = &target->EndPoint[assignedEndpoint];
+
+ if (pEndpoint->ServiceID != 0) {
+ /* endpoint already in use! */
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+
+ /* return assigned endpoint to caller */
+ pConnectResp->Endpoint = assignedEndpoint;
+ pConnectResp->MaxMsgLength = maxMsgSize;
+
+ /* setup the endpoint */
+ pEndpoint->ServiceID = pConnectReq->ServiceID; /* this marks the endpoint in use */
+ pEndpoint->MaxTxQueueDepth = pConnectReq->MaxSendQueueDepth;
+ pEndpoint->MaxMsgLength = maxMsgSize;
+ /* copy all the callbacks */
+ pEndpoint->EpCallBacks = pConnectReq->EpCallbacks;
+ INIT_HTC_PACKET_QUEUE(&pEndpoint->RxBuffers);
+ INIT_HTC_PACKET_QUEUE(&pEndpoint->TxQueue);
+ /* set the credit distribution info for this endpoint, this information is
+ * passed back to the credit distribution callback function */
+ pEndpoint->CreditDist.ServiceID = pConnectReq->ServiceID;
+ pEndpoint->CreditDist.pHTCReserved = pEndpoint;
+ pEndpoint->CreditDist.Endpoint = assignedEndpoint;
+ pEndpoint->CreditDist.TxCreditSize = target->TargetCreditSize;
+ pEndpoint->CreditDist.TxCreditsPerMaxMsg = maxMsgSize / target->TargetCreditSize;
+
+ if (0 == pEndpoint->CreditDist.TxCreditsPerMaxMsg) {
+ pEndpoint->CreditDist.TxCreditsPerMaxMsg = 1;
+ }
+
+ status = A_OK;
+
+ } while (FALSE);
+
+ if (pSendPacket != NULL) {
+ HTC_FREE_CONTROL_TX(target,pSendPacket);
+ }
+
+ if (pRecvPacket != NULL) {
+ HTC_FREE_CONTROL_RX(target,pRecvPacket);
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCConnectService \n"));
+
+ return status;
+}
+
+static void AddToEndpointDistList(HTC_TARGET *target, HTC_ENDPOINT_CREDIT_DIST *pEpDist)
+{
+ HTC_ENDPOINT_CREDIT_DIST *pCurEntry,*pLastEntry;
+
+ if (NULL == target->EpCreditDistributionListHead) {
+ target->EpCreditDistributionListHead = pEpDist;
+ pEpDist->pNext = NULL;
+ pEpDist->pPrev = NULL;
+ return;
+ }
+
+ /* queue to the end of the list, this does not have to be very
+ * fast since this list is built at startup time */
+ pCurEntry = target->EpCreditDistributionListHead;
+
+ while (pCurEntry) {
+ pLastEntry = pCurEntry;
+ pCurEntry = pCurEntry->pNext;
+ }
+
+ pLastEntry->pNext = pEpDist;
+ pEpDist->pPrev = pLastEntry;
+ pEpDist->pNext = NULL;
+}
+
+
+
+/* default credit init callback */
+static void HTCDefaultCreditInit(void *Context,
+ HTC_ENDPOINT_CREDIT_DIST *pEPList,
+ int TotalCredits)
+{
+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+ int totalEps = 0;
+ int creditsPerEndpoint;
+
+ pCurEpDist = pEPList;
+ /* first run through the list and figure out how many endpoints we are dealing with */
+ while (pCurEpDist != NULL) {
+ pCurEpDist = pCurEpDist->pNext;
+ totalEps++;
+ }
+
+ /* even distribution */
+ creditsPerEndpoint = TotalCredits/totalEps;
+
+ pCurEpDist = pEPList;
+ /* run through the list and set minimum and normal credits and
+ * provide the endpoint with some credits to start */
+ while (pCurEpDist != NULL) {
+
+ if (creditsPerEndpoint < pCurEpDist->TxCreditsPerMaxMsg) {
+ /* too many endpoints and not enough credits */
+ AR_DEBUG_ASSERT(FALSE);
+ break;
+ }
+ /* our minimum is set for at least 1 max message */
+ pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
+ /* this value is ignored by our credit alg, since we do
+ * not dynamically adjust credits, this is the policy of
+ * the "default" credit distribution, something simple and easy */
+ pCurEpDist->TxCreditsNorm = 0xFFFF;
+ /* give the endpoint minimum credits */
+ pCurEpDist->TxCredits = creditsPerEndpoint;
+ pCurEpDist->TxCreditsAssigned = creditsPerEndpoint;
+ pCurEpDist = pCurEpDist->pNext;
+ }
+
+}
+
+/* default credit distribution callback, NOTE, this callback holds the TX lock */
+void HTCDefaultCreditDist(void *Context,
+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
+ HTC_CREDIT_DIST_REASON Reason)
+{
+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+
+ if (Reason == HTC_CREDIT_DIST_SEND_COMPLETE) {
+ pCurEpDist = pEPDistList;
+ /* simple distribution */
+ while (pCurEpDist != NULL) {
+ if (pCurEpDist->TxCreditsToDist > 0) {
+ /* just give the endpoint back the credits */
+ pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
+ pCurEpDist->TxCreditsToDist = 0;
+ }
+ pCurEpDist = pCurEpDist->pNext;
+ }
+ }
+
+ /* note we do not need to handle the other reason codes as this is a very
+ * simple distribution scheme, no need to seek for more credits or handle inactivity */
+}
+
+void HTCSetCreditDistribution(HTC_HANDLE HTCHandle,
+ void *pCreditDistContext,
+ HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
+ HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
+ HTC_SERVICE_ID ServicePriorityOrder[],
+ int ListLength)
+{
+ HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle);
+ int i;
+ int ep;
+
+ if (CreditInitFunc != NULL) {
+ /* caller has supplied their own distribution functions */
+ target->InitCredits = CreditInitFunc;
+ AR_DEBUG_ASSERT(CreditDistFunc != NULL);
+ target->DistributeCredits = CreditDistFunc;
+ target->pCredDistContext = pCreditDistContext;
+ } else {
+ /* caller wants HTC to do distribution */
+ /* if caller wants service to handle distributions then
+ * it must set both of these to NULL! */
+ AR_DEBUG_ASSERT(CreditDistFunc == NULL);
+ target->InitCredits = HTCDefaultCreditInit;
+ target->DistributeCredits = HTCDefaultCreditDist;
+ target->pCredDistContext = target;
+ }
+
+ /* always add HTC control endpoint first, we only expose the list after the
+ * first one, this is added for TX queue checking */
+ AddToEndpointDistList(target, &target->EndPoint[ENDPOINT_0].CreditDist);
+
+ /* build the list of credit distribution structures in priority order
+ * supplied by the caller, these will follow endpoint 0 */
+ for (i = 0; i < ListLength; i++) {
+ /* match services with endpoints and add the endpoints to the distribution list
+ * in FIFO order */
+ for (ep = ENDPOINT_1; ep < ENDPOINT_MAX; ep++) {
+ if (target->EndPoint[ep].ServiceID == ServicePriorityOrder[i]) {
+ /* queue this one to the list */
+ AddToEndpointDistList(target, &target->EndPoint[ep].CreditDist);
+ break;
+ }
+ }
+ AR_DEBUG_ASSERT(ep < ENDPOINT_MAX);
+ }
+
+}
--- /dev/null
+/*
+ * Copyright (c) 2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __AR6000_REGDUMP_H__
+#define __AR6000_REGDUMP_H__
+
+#if !defined(__ASSEMBLER__)
+/*
+ * Target CPU state at the time of failure is reflected
+ * in a register dump, which the Host can fetch through
+ * the diagnostic window.
+ */
+
+struct MIPS_exception_frame_s {
+ A_UINT32 pc; /* Program Counter */
+ A_UINT32 at; /* MIPS General Purpose registers */
+ A_UINT32 v0;
+ A_UINT32 v1;
+ A_UINT32 a0;
+ A_UINT32 a1;
+ A_UINT32 a2;
+ A_UINT32 a3;
+ A_UINT32 t0;
+ A_UINT32 t1;
+ A_UINT32 t2;
+ A_UINT32 t3;
+ A_UINT32 t4;
+ A_UINT32 t5;
+ A_UINT32 t6;
+ A_UINT32 t7;
+ A_UINT32 s0;
+ A_UINT32 s1;
+ A_UINT32 s2;
+ A_UINT32 s3;
+ A_UINT32 s4;
+ A_UINT32 s5;
+ A_UINT32 s6;
+ A_UINT32 s7;
+ A_UINT32 t8;
+ A_UINT32 t9;
+ A_UINT32 k0;
+ A_UINT32 k1;
+ A_UINT32 gp;
+ A_UINT32 sp;
+ A_UINT32 s8;
+ A_UINT32 ra;
+ A_UINT32 cause; /* Selected coprocessor regs */
+ A_UINT32 status;
+};
+typedef struct MIPS_exception_frame_s CPU_exception_frame_t;
+
+#endif
+
+/*
+ * Offsets into MIPS_exception_frame structure, for use in assembler code
+ * MUST MATCH C STRUCTURE ABOVE
+ */
+#define RD_pc 0
+#define RD_at 1
+#define RD_v0 2
+#define RD_v1 3
+#define RD_a0 4
+#define RD_a1 5
+#define RD_a2 6
+#define RD_a3 7
+#define RD_t0 8
+#define RD_t1 9
+#define RD_t2 10
+#define RD_t3 11
+#define RD_t4 12
+#define RD_t5 13
+#define RD_t6 14
+#define RD_t7 15
+#define RD_s0 16
+#define RD_s1 17
+#define RD_s2 18
+#define RD_s3 19
+#define RD_s4 20
+#define RD_s5 21
+#define RD_s6 22
+#define RD_s7 23
+#define RD_t8 24
+#define RD_t9 25
+#define RD_k0 26
+#define RD_k1 27
+#define RD_gp 28
+#define RD_sp 29
+#define RD_s8 30
+#define RD_ra 31
+#define RD_cause 32
+#define RD_status 33
+
+#define RD_SIZE (34*4) /* Space for this number of words */
+
+#endif /* __AR6000_REGDUMP_H__ */
--- /dev/null
+#define __VER_MAJOR_ 2
+#define __VER_MINOR_ 0
+#define __VER_PATCH_ 0
+
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * The makear6ksdk script (used for release builds) modifies the following line.
+ */
+#define __BUILD_NUMBER_ 18
+
+
+/* Format of the version number. */
+#define VER_MAJOR_BIT_OFFSET 28
+#define VER_MINOR_BIT_OFFSET 24
+#define VER_PATCH_BIT_OFFSET 16
+#define VER_BUILD_NUM_BIT_OFFSET 0
+
+
+/*
+ * The version has the following format:
+ * Bits 28-31: Major version
+ * Bits 24-27: Minor version
+ * Bits 16-23: Patch version
+ * Bits 0-15: Build number (automatically generated during build process )
+ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
+ *
+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
+ */
+#define AR6K_SW_VERSION ( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
+
+
--- /dev/null
+#define __VER_MAJOR_ 2
+#define __VER_MINOR_ 0
+#define __VER_PATCH_ 0
+
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * The makear6ksdk script (used for release builds) modifies the following line.
+ */
+#define __BUILD_NUMBER_ 18
+
+
+/* Format of the version number. */
+#define VER_MAJOR_BIT_OFFSET 28
+#define VER_MINOR_BIT_OFFSET 24
+#define VER_PATCH_BIT_OFFSET 16
+#define VER_BUILD_NUM_BIT_OFFSET 0
+
+
+/*
+ * The version has the following format:
+ * Bits 28-31: Major version
+ * Bits 24-27: Minor version
+ * Bits 16-23: Patch version
+ * Bits 0-15: Build number (automatically generated during build process )
+ * E.g. Build 1.1.3.7 would be represented as 0x11030007.
+ *
+ * DO NOT split the following macro into multiple lines as this may confuse the build scripts.
+ */
+#define AR6K_SW_VERSION ( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) )
+
+
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions for AR6001 registers
+ * that may be directly manipulated by Host software.
+ */
+
+#ifndef __AR6KHWREG_H__
+#define __AR6KHWREG_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Host registers */
+#define HOST_INT_STATUS_ADDRESS 0x00000400
+#define CPU_INT_STATUS_ADDRESS 0x00000401
+#define ERROR_INT_STATUS_ADDRESS 0x00000402
+#define INT_STATUS_ENABLE_ADDRESS 0x00000418
+#define CPU_INT_STATUS_ENABLE_ADDRESS 0x00000419
+#define COUNT_ADDRESS 0x00000420
+#define COUNT_DEC_ADDRESS 0x00000440
+#define WINDOW_DATA_ADDRESS 0x00000474
+#define WINDOW_WRITE_ADDR_ADDRESS 0x00000478
+#define WINDOW_READ_ADDR_ADDRESS 0x0000047c
+
+/* Target addresses */
+#define RESET_CONTROL_ADDRESS 0x0c000000
+#define MC_REMAP_VALID_ADDRESS 0x0c004080
+#define MC_REMAP_SIZE_ADDRESS 0x0c004100
+#define MC_REMAP_COMPARE_ADDRESS 0x0c004180
+#define MC_REMAP_TARGET_ADDRESS 0x0c004200
+#define LOCAL_COUNT_ADDRESS 0x0c014080
+#define LOCAL_SCRATCH_ADDRESS 0x0c0140c0
+
+
+#define INT_STATUS_ENABLE_ERROR_MSB 7
+#define INT_STATUS_ENABLE_ERROR_LSB 7
+#define INT_STATUS_ENABLE_ERROR_MASK 0x00000080
+#define INT_STATUS_ENABLE_ERROR_GET(x) (((x) & INT_STATUS_ENABLE_ERROR_MASK) >> INT_STATUS_ENABLE_ERROR_LSB)
+#define INT_STATUS_ENABLE_ERROR_SET(x) (((x) << INT_STATUS_ENABLE_ERROR_LSB) & INT_STATUS_ENABLE_ERROR_MASK)
+
+#define INT_STATUS_ENABLE_CPU_MSB 6
+#define INT_STATUS_ENABLE_CPU_LSB 6
+#define INT_STATUS_ENABLE_CPU_MASK 0x00000040
+#define INT_STATUS_ENABLE_CPU_GET(x) (((x) & INT_STATUS_ENABLE_CPU_MASK) >> INT_STATUS_ENABLE_CPU_LSB)
+#define INT_STATUS_ENABLE_CPU_SET(x) (((x) << INT_STATUS_ENABLE_CPU_LSB) & INT_STATUS_ENABLE_CPU_MASK)
+
+#define INT_STATUS_ENABLE_COUNTER_MSB 4
+#define INT_STATUS_ENABLE_COUNTER_LSB 4
+#define INT_STATUS_ENABLE_COUNTER_MASK 0x00000010
+#define INT_STATUS_ENABLE_COUNTER_GET(x) (((x) & INT_STATUS_ENABLE_COUNTER_MASK) >> INT_STATUS_ENABLE_COUNTER_LSB)
+#define INT_STATUS_ENABLE_COUNTER_SET(x) (((x) << INT_STATUS_ENABLE_COUNTER_LSB) & INT_STATUS_ENABLE_COUNTER_MASK)
+
+#define INT_STATUS_ENABLE_MBOX_DATA_MSB 3
+#define INT_STATUS_ENABLE_MBOX_DATA_LSB 0
+#define INT_STATUS_ENABLE_MBOX_DATA_MASK 0x0000000f
+#define INT_STATUS_ENABLE_MBOX_DATA_GET(x) (((x) & INT_STATUS_ENABLE_MBOX_DATA_MASK) >> INT_STATUS_ENABLE_MBOX_DATA_LSB)
+#define INT_STATUS_ENABLE_MBOX_DATA_SET(x) (((x) << INT_STATUS_ENABLE_MBOX_DATA_LSB) & INT_STATUS_ENABLE_MBOX_DATA_MASK)
+
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MSB 1
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB 1
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK 0x00000002
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_GET(x) (((x) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) >> ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB)
+#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(x) (((x) << ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK)
+
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MSB 0
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB 0
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK 0x00000001
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_GET(x) (((x) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) >> ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB)
+#define ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(x) (((x) << ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK)
+
+
+#define CPU_INT_STATUS_ENABLE_BIT_MSB 7
+#define CPU_INT_STATUS_ENABLE_BIT_LSB 0
+#define CPU_INT_STATUS_ENABLE_BIT_MASK 0x000000ff
+#define CPU_INT_STATUS_ENABLE_BIT_GET(x) (((x) & CPU_INT_STATUS_ENABLE_BIT_MASK) >> CPU_INT_STATUS_ENABLE_BIT_LSB)
+#define CPU_INT_STATUS_ENABLE_BIT_SET(x) (((x) << CPU_INT_STATUS_ENABLE_BIT_LSB) & CPU_INT_STATUS_ENABLE_BIT_MASK)
+
+#define COUNTER_INT_STATUS_ENABLE_BIT_MSB 7
+#define COUNTER_INT_STATUS_ENABLE_BIT_LSB 0
+#define COUNTER_INT_STATUS_ENABLE_BIT_MASK 0x000000ff
+#define COUNTER_INT_STATUS_ENABLE_BIT_GET(x) (((x) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) >> COUNTER_INT_STATUS_ENABLE_BIT_LSB)
+#define COUNTER_INT_STATUS_ENABLE_BIT_SET(x) (((x) << COUNTER_INT_STATUS_ENABLE_BIT_LSB) & COUNTER_INT_STATUS_ENABLE_BIT_MASK)
+
+#define ERROR_INT_STATUS_WAKEUP_MSB 2
+#define ERROR_INT_STATUS_WAKEUP_LSB 2
+#define ERROR_INT_STATUS_WAKEUP_MASK 0x00000004
+#define ERROR_INT_STATUS_WAKEUP_GET(x) (((x) & ERROR_INT_STATUS_WAKEUP_MASK) >> ERROR_INT_STATUS_WAKEUP_LSB)
+#define ERROR_INT_STATUS_WAKEUP_SET(x) (((x) << ERROR_INT_STATUS_WAKEUP_LSB) & ERROR_INT_STATUS_WAKEUP_MASK)
+
+#define ERROR_INT_STATUS_RX_UNDERFLOW_MSB 1
+#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB 1
+#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK 0x00000002
+#define ERROR_INT_STATUS_RX_UNDERFLOW_GET(x) (((x) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) >> ERROR_INT_STATUS_RX_UNDERFLOW_LSB)
+#define ERROR_INT_STATUS_RX_UNDERFLOW_SET(x) (((x) << ERROR_INT_STATUS_RX_UNDERFLOW_LSB) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK)
+
+#define ERROR_INT_STATUS_TX_OVERFLOW_MSB 0
+#define ERROR_INT_STATUS_TX_OVERFLOW_LSB 0
+#define ERROR_INT_STATUS_TX_OVERFLOW_MASK 0x00000001
+#define ERROR_INT_STATUS_TX_OVERFLOW_GET(x) (((x) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) >> ERROR_INT_STATUS_TX_OVERFLOW_LSB)
+#define ERROR_INT_STATUS_TX_OVERFLOW_SET(x) (((x) << ERROR_INT_STATUS_TX_OVERFLOW_LSB) & ERROR_INT_STATUS_TX_OVERFLOW_MASK)
+
+#define HOST_INT_STATUS_ERROR_MSB 7
+#define HOST_INT_STATUS_ERROR_LSB 7
+#define HOST_INT_STATUS_ERROR_MASK 0x00000080
+#define HOST_INT_STATUS_ERROR_GET(x) (((x) & HOST_INT_STATUS_ERROR_MASK) >> HOST_INT_STATUS_ERROR_LSB)
+#define HOST_INT_STATUS_ERROR_SET(x) (((x) << HOST_INT_STATUS_ERROR_LSB) & HOST_INT_STATUS_ERROR_MASK)
+
+#define HOST_INT_STATUS_CPU_MSB 6
+#define HOST_INT_STATUS_CPU_LSB 6
+#define HOST_INT_STATUS_CPU_MASK 0x00000040
+#define HOST_INT_STATUS_CPU_GET(x) (((x) & HOST_INT_STATUS_CPU_MASK) >> HOST_INT_STATUS_CPU_LSB)
+#define HOST_INT_STATUS_CPU_SET(x) (((x) << HOST_INT_STATUS_CPU_LSB) & HOST_INT_STATUS_CPU_MASK)
+
+#define HOST_INT_STATUS_COUNTER_MSB 4
+#define HOST_INT_STATUS_COUNTER_LSB 4
+#define HOST_INT_STATUS_COUNTER_MASK 0x00000010
+#define HOST_INT_STATUS_COUNTER_GET(x) (((x) & HOST_INT_STATUS_COUNTER_MASK) >> HOST_INT_STATUS_COUNTER_LSB)
+#define HOST_INT_STATUS_COUNTER_SET(x) (((x) << HOST_INT_STATUS_COUNTER_LSB) & HOST_INT_STATUS_COUNTER_MASK)
+
+#define RESET_CONTROL_WARM_RST_MSB 7
+#define RESET_CONTROL_WARM_RST_LSB 7
+#define RESET_CONTROL_WARM_RST_MASK 0x00000080
+#define RESET_CONTROL_WARM_RST_GET(x) (((x) & RESET_CONTROL_WARM_RST_MASK) >> RESET_CONTROL_WARM_RST_LSB)
+#define RESET_CONTROL_WARM_RST_SET(x) (((x) << RESET_CONTROL_WARM_RST_LSB) & RESET_CONTROL_WARM_RST_MASK)
+
+#define RESET_CONTROL_COLD_RST_MSB 8
+#define RESET_CONTROL_COLD_RST_LSB 8
+#define RESET_CONTROL_COLD_RST_MASK 0x00000100
+#define RESET_CONTROL_COLD_RST_GET(x) (((x) & RESET_CONTROL_COLD_RST_MASK) >> RESET_CONTROL_COLD_RST_LSB)
+#define RESET_CONTROL_COLD_RST_SET(x) (((x) << RESET_CONTROL_COLD_RST_LSB) & RESET_CONTROL_COLD_RST_MASK)
+
+#define RESET_CAUSE_LAST_MSB 2
+#define RESET_CAUSE_LAST_LSB 0
+#define RESET_CAUSE_LAST_MASK 0x00000007
+#define RESET_CAUSE_LAST_GET(x) (((x) & RESET_CAUSE_LAST_MASK) >> RESET_CAUSE_LAST_LSB)
+#define RESET_CAUSE_LAST_SET(x) (((x) << RESET_CAUSE_LAST_LSB) & RESET_CAUSE_LAST_MASK)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __AR6KHWREG_H__ */
--- /dev/null
+#ifndef _A_CONFIG_H_
+#define _A_CONFIG_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * This file contains software configuration options that enables
+ * specific software "features"
+ */
+#include "../ar6000/config_linux.h"
+
+#endif
--- /dev/null
+#ifndef _A_DEBUG_H_
+#define _A_DEBUG_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_types.h>
+#include <a_osapi.h>
+
+#define DBG_INFO 0x00000001
+#define DBG_ERROR 0x00000002
+#define DBG_WARNING 0x00000004
+#define DBG_SDIO 0x00000008
+#define DBG_HIF 0x00000010
+#define DBG_HTC 0x00000020
+#define DBG_WMI 0x00000040
+#define DBG_WMI2 0x00000080
+#define DBG_DRIVER 0x00000100
+
+#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING)
+
+#include "../ar6000/debug_linux.h"
+
+#endif
--- /dev/null
+#ifndef _A_DRV_H_
+#define _A_DRV_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_drv.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/athdrv_linux.h"
+
+#endif /* _ADRV_H_ */
--- /dev/null
+#ifndef _A_DRV_API_H_
+#define _A_DRV_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/****************************************************************************/
+/****************************************************************************/
+/** **/
+/** WMI related hooks **/
+/** **/
+/****************************************************************************/
+/****************************************************************************/
+
+#include <ar6000_api.h>
+
+#define A_WMI_CHANNELLIST_RX(devt, numChan, chanList) \
+ ar6000_channelList_rx((devt), (numChan), (chanList))
+
+#define A_WMI_SET_NUMDATAENDPTS(devt, num) \
+ ar6000_set_numdataendpts((devt), (num))
+
+#define A_WMI_CONTROL_TX(devt, osbuf, streamID) \
+ ar6000_control_tx((devt), (osbuf), (streamID))
+
+#define A_WMI_TARGETSTATS_EVENT(devt, pStats) \
+ ar6000_targetStats_event((devt), (pStats))
+
+#define A_WMI_SCANCOMPLETE_EVENT(devt, status) \
+ ar6000_scanComplete_event((devt), (status))
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+
+#define A_WMI_DSET_DATA_REQ(devt, access_cookie, offset, length, targ_buf, targ_reply_fn, targ_reply_arg) \
+ ar6000_dset_data_req((devt), (access_cookie), (offset), (length), (targ_buf), (targ_reply_fn), (targ_reply_arg))
+
+#define A_WMI_DSET_CLOSE(devt, access_cookie) \
+ ar6000_dset_close((devt), (access_cookie))
+
+#endif
+
+#define A_WMI_DSET_OPEN_REQ(devt, id, targ_handle, targ_reply_fn, targ_reply_arg) \
+ ar6000_dset_open_req((devt), (id), (targ_handle), (targ_reply_fn), (targ_reply_arg))
+
+#define A_WMI_CONNECT_EVENT(devt, channel, bssid, listenInterval, beaconInterval, networkType, beaconIeLen, assocReqLen, assocRespLen, assocInfo) \
+ ar6000_connect_event((devt), (channel), (bssid), (listenInterval), (beaconInterval), (networkType), (beaconIeLen), (assocReqLen), (assocRespLen), (assocInfo))
+
+#define A_WMI_REGDOMAIN_EVENT(devt, regCode) \
+ ar6000_regDomain_event((devt), (regCode))
+
+#define A_WMI_NEIGHBORREPORT_EVENT(devt, numAps, info) \
+ ar6000_neighborReport_event((devt), (numAps), (info))
+
+#define A_WMI_DISCONNECT_EVENT(devt, reason, bssid, assocRespLen, assocInfo, protocolReasonStatus) \
+ ar6000_disconnect_event((devt), (reason), (bssid), (assocRespLen), (assocInfo), (protocolReasonStatus))
+
+#define A_WMI_TKIP_MICERR_EVENT(devt, keyid, ismcast) \
+ ar6000_tkip_micerr_event((devt), (keyid), (ismcast))
+
+#define A_WMI_BITRATE_RX(devt, rateKbps) \
+ ar6000_bitrate_rx((devt), (rateKbps))
+
+#define A_WMI_TXPWR_RX(devt, txPwr) \
+ ar6000_txPwr_rx((devt), (txPwr))
+
+#define A_WMI_READY_EVENT(devt, datap, phyCap) \
+ ar6000_ready_event((devt), (datap), (phyCap))
+
+#define A_WMI_DBGLOG_INIT_DONE(ar) \
+ ar6000_dbglog_init_done(ar);
+
+#define A_WMI_RSSI_THRESHOLD_EVENT(devt, newThreshold, rssi) \
+ ar6000_rssiThreshold_event((devt), (newThreshold), (rssi))
+
+#define A_WMI_REPORT_ERROR_EVENT(devt, errorVal) \
+ ar6000_reportError_event((devt), (errorVal))
+
+#define A_WMI_ROAM_TABLE_EVENT(devt, pTbl) \
+ ar6000_roam_tbl_event((devt), (pTbl))
+
+#define A_WMI_ROAM_DATA_EVENT(devt, p) \
+ ar6000_roam_data_event((devt), (p))
+
+#define A_WMI_WOW_LIST_EVENT(devt, num_filters, wow_filters) \
+ ar6000_wow_list_event((devt), (num_filters), (wow_filters))
+
+#define A_WMI_CAC_EVENT(devt, ac, cac_indication, statusCode, tspecSuggestion) \
+ ar6000_cac_event((devt), (ac), (cac_indication), (statusCode), (tspecSuggestion))
+
+#define A_WMI_IPTOS_TO_USERPRIORITY(pkt) \
+ ar6000_iptos_to_userPriority((pkt))
+
+#define A_WMI_PMKID_LIST_EVENT(devt, num_pmkid, pmkid_list) \
+ ar6000_pmkid_list_event((devt), (num_pmkid), (pmkid_list))
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+
+#define A_WMI_GPIO_INTR_RX(intr_mask, input_values) \
+ ar6000_gpio_intr_rx((intr_mask), (input_values))
+
+#define A_WMI_GPIO_DATA_RX(reg_id, value) \
+ ar6000_gpio_data_rx((reg_id), (value))
+
+#define A_WMI_GPIO_ACK_RX() \
+ ar6000_gpio_ack_rx()
+
+#endif
+
+#ifdef SEND_EVENT_TO_APP
+
+#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) \
+ ar6000_send_event_to_app((ar), (eventId), (datap), (len))
+
+#else
+
+#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len)
+
+#endif
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+#define A_WMI_TCMD_RX_REPORT_EVENT(devt, results, len) \
+ ar6000_tcmd_rx_report_event((devt), (results), (len))
+#endif
+
+#define A_WMI_HBCHALLENGERESP_EVENT(devt, cookie, source) \
+ ar6000_hbChallengeResp_event((devt), (cookie), (source))
+
+#define A_WMI_TX_RETRY_ERR_EVENT(devt) \
+ ar6000_tx_retry_err_event((devt))
+
+#define A_WMI_SNR_THRESHOLD_EVENT_RX(devt, newThreshold, snr) \
+ ar6000_snrThresholdEvent_rx((devt), (newThreshold), (snr))
+
+#define A_WMI_LQ_THRESHOLD_EVENT_RX(devt, range, lqVal) \
+ ar6000_lqThresholdEvent_rx((devt), (range), (lqVal))
+
+#define A_WMI_RATEMASK_RX(devt, ratemask) \
+ ar6000_ratemask_rx((devt), (ratemask))
+
+#define A_WMI_KEEPALIVE_RX(devt, configured) \
+ ar6000_keepalive_rx((devt), (configured))
+
+#define A_WMI_BSSINFO_EVENT_RX(ar, datp, len) \
+ ar6000_bssInfo_event_rx((ar), (datap), (len))
+
+#define A_WMI_DBGLOG_EVENT(ar, dropped, buffer, length) \
+ ar6000_dbglog_event((ar), (dropped), (buffer), (length));
+
+#define A_WMI_STREAM_TX_ACTIVE(devt,trafficClass) \
+ ar6000_indicate_tx_activity((devt),(trafficClass), TRUE)
+
+#define A_WMI_STREAM_TX_INACTIVE(devt,trafficClass) \
+ ar6000_indicate_tx_activity((devt),(trafficClass), FALSE)
+
+/****************************************************************************/
+/****************************************************************************/
+/** **/
+/** HTC related hooks **/
+/** **/
+/****************************************************************************/
+/****************************************************************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+#ifndef _A_OSAPI_H_
+#define _A_OSAPI_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_osapi.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/osapi_linux.h"
+
+#endif /* _OSAPI_H_ */
--- /dev/null
+#ifndef _A_TYPES_H_
+#define _A_TYPES_H_
+/*
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_types.h#1 $
+ *
+ * This file contains the definitions of the basic atheros data types.
+ * It is used to map the data types in atheros files to a platform specific
+ * type.
+ *
+ * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/athtypes_linux.h"
+
+#endif /* _ATHTYPES_H_ */
--- /dev/null
+#ifndef _AR6000_API_H_
+#define _AR6000_API_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the API to access the OS dependent atheros host driver
+ * by the WMI or WLAN generic modules.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/ar6000_api.h#1 $
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "../ar6000/ar6xapi_linux.h"
+
+#endif /* _AR6000_API_H */
+
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef AR6000_DIAG_H_
+#define AR6000_DIAG_H_
+
+
+A_STATUS
+ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+A_STATUS
+ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+
+A_STATUS
+ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+ A_UCHAR *data, A_UINT32 length);
+
+A_STATUS
+ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+ A_UCHAR *data, A_UINT32 length);
+
+#endif /*AR6000_DIAG_H_*/
--- /dev/null
+#ifndef __ATHDEFS_H__
+#define __ATHDEFS_H__
+
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains definitions that may be used across both
+ * Host and Target software. Nothing here is module-dependent
+ * or platform-dependent.
+ */
+
+/*
+ * Generic error codes that can be used by hw, sta, ap, sim, dk
+ * and any other environments. Since these are enums, feel free to
+ * add any more codes that you need.
+ */
+
+typedef enum {
+ A_ERROR = -1, /* Generic error return */
+ A_OK = 0, /* success */
+ /* Following values start at 1 */
+ A_DEVICE_NOT_FOUND, /* not able to find PCI device */
+ A_NO_MEMORY, /* not able to allocate memory, not available */
+ A_MEMORY_NOT_AVAIL, /* memory region is not free for mapping */
+ A_NO_FREE_DESC, /* no free descriptors available */
+ A_BAD_ADDRESS, /* address does not match descriptor */
+ A_WIN_DRIVER_ERROR, /* used in NT_HW version, if problem at init */
+ A_REGS_NOT_MAPPED, /* registers not correctly mapped */
+ A_EPERM, /* Not superuser */
+ A_EACCES, /* Access denied */
+ A_ENOENT, /* No such entry, search failed, etc. */
+ A_EEXIST, /* The object already exists (can't create) */
+ A_EFAULT, /* Bad address fault */
+ A_EBUSY, /* Object is busy */
+ A_EINVAL, /* Invalid parameter */
+ A_EMSGSIZE, /* Inappropriate message buffer length */
+ A_ECANCELED, /* Operation canceled */
+ A_ENOTSUP, /* Operation not supported */
+ A_ECOMM, /* Communication error on send */
+ A_EPROTO, /* Protocol error */
+ A_ENODEV, /* No such device */
+ A_EDEVNOTUP, /* device is not UP */
+ A_NO_RESOURCE, /* No resources for requested operation */
+ A_HARDWARE, /* Hardware failure */
+ A_PENDING, /* Asynchronous routine; will send up results la
+ter (typically in callback) */
+ A_EBADCHANNEL, /* The channel cannot be used */
+ A_DECRYPT_ERROR, /* Decryption error */
+ A_PHY_ERROR, /* RX PHY error */
+ A_CONSUMED /* Object was consumed */
+} A_STATUS;
+
+#define A_SUCCESS(x) (x == A_OK)
+#define A_FAILED(x) (!A_SUCCESS(x))
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/*
+ * The following definition is WLAN specific definition
+ */
+typedef enum {
+ MODE_11A = 0, /* 11a Mode */
+ MODE_11G = 1, /* 11g + 11b Mode */
+ MODE_11B = 2, /* 11b Mode */
+ MODE_11GONLY = 3, /* 11g only Mode */
+ MODE_UNKNOWN = 4,
+ MODE_MAX = 4
+} WLAN_PHY_MODE;
+
+typedef enum {
+ WLAN_11A_CAPABILITY = 1,
+ WLAN_11G_CAPABILITY = 2,
+ WLAN_11AG_CAPABILITY = 3,
+}WLAN_CAPABILITY;
+
+#endif /* __ATHDEFS_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _ATHDRV_H_
+#define _ATHDRV_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ATHDRV_H_ */
--- /dev/null
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ * @file: athendpack.h
+ *
+ * @abstract: end compiler-specific structure packing
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+#ifdef VXWORKS
+#endif /* VXWORKS */
+
+#ifdef LINUX
+#endif /* LINUX */
+
+#ifdef QNX
+#endif /* QNX */
+
+#ifdef INTEGRITY
+#include "integrity/athendpack_integrity.h"
+#endif /* INTEGRITY */
+
+#ifdef NUCLEUS
+#endif /* NUCLEUS */
+
+#ifdef UNDER_CE
+#include "../os/wince/include/athendpack_wince.h"
+#endif /* WINCE */
+
--- /dev/null
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ * @file: athstartpack.h
+ *
+ * @abstract: start compiler-specific structure packing
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef VXWORKS
+#endif /* VXWORKS */
+
+#ifdef LINUX
+#endif /* LINUX */
+
+#ifdef QNX
+#endif /* QNX */
+
+#ifdef INTEGRITY
+#include "integrity/athstartpack_integrity.h"
+#endif /* INTEGRITY */
+
+#ifdef NUCLEUS
+#endif /* NUCLEUS */
+
+#ifdef UNDER_CE
+#include "../os/wince/include/athstartpack_wince.h"
+#endif /* WINCE */
+
--- /dev/null
+#ifndef _BMI_H_
+#define _BMI_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ * BMI declarations and prototypes
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "hif.h"
+#include "a_osapi.h"
+#include "bmi_msg.h"
+
+void
+BMIInit(void);
+
+A_STATUS
+BMIDone(HIF_DEVICE *device);
+
+A_STATUS
+BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info);
+
+A_STATUS
+BMIReadMemory(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UCHAR *buffer,
+ A_UINT32 length);
+
+A_STATUS
+BMIWriteMemory(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UCHAR *buffer,
+ A_UINT32 length);
+
+A_STATUS
+BMIExecute(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UINT32 *param);
+
+A_STATUS
+BMISetAppStart(HIF_DEVICE *device,
+ A_UINT32 address);
+
+A_STATUS
+BMIReadSOCRegister(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UINT32 *param);
+
+A_STATUS
+BMIWriteSOCRegister(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UINT32 param);
+
+A_STATUS
+BMIrompatchInstall(HIF_DEVICE *device,
+ A_UINT32 ROM_addr,
+ A_UINT32 RAM_addr,
+ A_UINT32 nbytes,
+ A_UINT32 do_activate,
+ A_UINT32 *patch_id);
+
+A_STATUS
+BMIrompatchUninstall(HIF_DEVICE *device,
+ A_UINT32 rompatch_id);
+
+A_STATUS
+BMIrompatchActivate(HIF_DEVICE *device,
+ A_UINT32 rompatch_count,
+ A_UINT32 *rompatch_list);
+
+A_STATUS
+BMIrompatchDeactivate(HIF_DEVICE *device,
+ A_UINT32 rompatch_count,
+ A_UINT32 *rompatch_list);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _BMI_H_ */
--- /dev/null
+#ifndef __BMI_MSG_H__
+#define __BMI_MSG_H__
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * Bootloader Messaging Interface (BMI)
+ *
+ * BMI is a very simple messaging interface used during initialization
+ * to read memory, write memory, execute code, and to define an
+ * application entry PC.
+ *
+ * It is used to download an application to AR6K, to provide
+ * patches to code that is already resident on AR6K, and generally
+ * to examine and modify state. The Host has an opportunity to use
+ * BMI only once during bootup. Once the Host issues a BMI_DONE
+ * command, this opportunity ends.
+ *
+ * The Host writes BMI requests to mailbox0, and reads BMI responses
+ * from mailbox0. BMI requests all begin with a command
+ * (see below for specific commands), and are followed by
+ * command-specific data.
+ *
+ * Flow control:
+ * The Host can only issue a command once the Target gives it a
+ * "BMI Command Credit", using AR6K Counter #4. As soon as the
+ * Target has completed a command, it issues another BMI Command
+ * Credit (so the Host can issue the next command).
+ *
+ * BMI handles all required Target-side cache flushing.
+ */
+
+
+/* Maximum data size used for BMI transfers */
+#define BMI_DATASZ_MAX 32
+
+/* BMI Commands */
+
+#define BMI_NO_COMMAND 0
+
+#define BMI_DONE 1
+ /*
+ * Semantics: Host is done using BMI
+ * Request format:
+ * A_UINT32 command (BMI_DONE)
+ * Response format: none
+ */
+
+#define BMI_READ_MEMORY 2
+ /*
+ * Semantics: Host reads AR6K memory
+ * Request format:
+ * A_UINT32 command (BMI_READ_MEMORY)
+ * A_UINT32 address
+ * A_UINT32 length, at most BMI_DATASZ_MAX
+ * Response format:
+ * A_UINT8 data[length]
+ */
+
+#define BMI_WRITE_MEMORY 3
+ /*
+ * Semantics: Host writes AR6K memory
+ * Request format:
+ * A_UINT32 command (BMI_WRITE_MEMORY)
+ * A_UINT32 address
+ * A_UINT32 length, at most BMI_DATASZ_MAX
+ * A_UINT8 data[length]
+ * Response format: none
+ */
+
+#define BMI_EXECUTE 4
+ /*
+ * Semantics: Causes AR6K to execute code
+ * Request format:
+ * A_UINT32 command (BMI_EXECUTE)
+ * A_UINT32 address
+ * A_UINT32 parameter
+ * Response format:
+ * A_UINT32 return value
+ */
+
+#define BMI_SET_APP_START 5
+ /*
+ * Semantics: Set Target application starting address
+ * Request format:
+ * A_UINT32 command (BMI_SET_APP_START)
+ * A_UINT32 address
+ * Response format: none
+ */
+
+#define BMI_READ_SOC_REGISTER 6
+ /*
+ * Semantics: Read a 32-bit Target SOC register.
+ * Request format:
+ * A_UINT32 command (BMI_READ_REGISTER)
+ * A_UINT32 address
+ * Response format:
+ * A_UINT32 value
+ */
+
+#define BMI_WRITE_SOC_REGISTER 7
+ /*
+ * Semantics: Write a 32-bit Target SOC register.
+ * Request format:
+ * A_UINT32 command (BMI_WRITE_REGISTER)
+ * A_UINT32 address
+ * A_UINT32 value
+ *
+ * Response format: none
+ */
+
+#define BMI_GET_TARGET_ID 8
+#define BMI_GET_TARGET_INFO 8
+ /*
+ * Semantics: Fetch the 4-byte Target information
+ * Request format:
+ * A_UINT32 command (BMI_GET_TARGET_ID/INFO)
+ * Response format1 (old firmware):
+ * A_UINT32 TargetVersionID
+ * Response format2 (newer firmware):
+ * A_UINT32 TARGET_VERSION_SENTINAL
+ * struct bmi_target_info;
+ */
+
+struct bmi_target_info {
+ A_UINT32 target_info_byte_count; /* size of this structure */
+ A_UINT32 target_ver; /* Target Version ID */
+ A_UINT32 target_type; /* Target type */
+};
+#define TARGET_VERSION_SENTINAL 0xffffffff
+#define TARGET_TYPE_AR6001 1
+#define TARGET_TYPE_AR6002 2
+
+
+#define BMI_ROMPATCH_INSTALL 9
+ /*
+ * Semantics: Install a ROM Patch.
+ * Request format:
+ * A_UINT32 command (BMI_ROMPATCH_INSTALL)
+ * A_UINT32 Target ROM Address
+ * A_UINT32 Target RAM Address
+ * A_UINT32 Size, in bytes
+ * A_UINT32 Activate? 1-->activate;
+ * 0-->install but do not activate
+ * Response format:
+ * A_UINT32 PatchID
+ */
+
+#define BMI_ROMPATCH_UNINSTALL 10
+ /*
+ * Semantics: Uninstall a previously-installed ROM Patch,
+ * automatically deactivating, if necessary.
+ * Request format:
+ * A_UINT32 command (BMI_ROMPATCH_UNINSTALL)
+ * A_UINT32 PatchID
+ *
+ * Response format: none
+ */
+
+#define BMI_ROMPATCH_ACTIVATE 11
+ /*
+ * Semantics: Activate a list of previously-installed ROM Patches.
+ * Request format:
+ * A_UINT32 command (BMI_ROMPATCH_ACTIVATE)
+ * A_UINT32 rompatch_count
+ * A_UINT32 PatchID[rompatch_count]
+ *
+ * Response format: none
+ */
+
+#define BMI_ROMPATCH_DEACTIVATE 12
+ /*
+ * Semantics: Deactivate a list of active ROM Patches.
+ * Request format:
+ * A_UINT32 command (BMI_ROMPATCH_DEACTIVATE)
+ * A_UINT32 rompatch_count
+ * A_UINT32 PatchID[rompatch_count]
+ *
+ * Response format: none
+ */
+
+
+#endif /* __BMI_MSG_H__ */
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+
+#ifndef COMMON_DRV_H_
+#define COMMON_DRV_H_
+
+#include "hif.h"
+#include "htc_packet.h"
+
+
+
+/* structure that is the state information for the default credit distribution callback
+ * drivers should instantiate (zero-init as well) this structure in their driver instance
+ * and pass it as a context to the HTC credit distribution functions */
+typedef struct _COMMON_CREDIT_STATE_INFO {
+ int TotalAvailableCredits; /* total credits in the system at startup */
+ int CurrentFreeCredits; /* credits available in the pool that have not been
+ given out to endpoints */
+ HTC_ENDPOINT_CREDIT_DIST *pLowestPriEpDist; /* pointer to the lowest priority endpoint dist struct */
+} COMMON_CREDIT_STATE_INFO;
+
+
+/* HTC TX packet tagging definitions */
+#define AR6K_CONTROL_PKT_TAG HTC_TX_PACKET_TAG_USER_DEFINED
+#define AR6K_DATA_PKT_TAG (AR6K_CONTROL_PKT_TAG + 1)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* OS-independent APIs */
+A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo);
+A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data);
+A_STATUS ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, A_UCHAR *data, A_UINT32 length);
+A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
+void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType);
+A_STATUS ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*COMMON_DRV_H_*/
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions and data structures associated with
+ * the log based debug mechanism.
+ *
+ */
+
+#ifndef _DBGLOG_H_
+#define _DBGLOG_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define DBGLOG_TIMESTAMP_OFFSET 0
+#define DBGLOG_TIMESTAMP_MASK 0x0000FFFF /* Bit 0-15. Contains bit
+ 8-23 of the LF0 timer */
+#define DBGLOG_DBGID_OFFSET 16
+#define DBGLOG_DBGID_MASK 0x03FF0000 /* Bit 16-25 */
+#define DBGLOG_DBGID_NUM_MAX 256 /* Upper limit is width of mask */
+
+#define DBGLOG_MODULEID_OFFSET 26
+#define DBGLOG_MODULEID_MASK 0x3C000000 /* Bit 26-29 */
+#define DBGLOG_MODULEID_NUM_MAX 16 /* Upper limit is width of mask */
+
+/*
+ * Please ensure that the definition of any new module intrduced is captured
+ * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The
+ * structure is required for the parser to correctly pick up the values for
+ * different modules.
+ */
+#define DBGLOG_MODULEID_START
+#define DBGLOG_MODULEID_INF 0
+#define DBGLOG_MODULEID_WMI 1
+#define DBGLOG_MODULEID_CSERV 2
+#define DBGLOG_MODULEID_PM 3
+#define DBGLOG_MODULEID_TXRX_MGMTBUF 4
+#define DBGLOG_MODULEID_TXRX_TXBUF 5
+#define DBGLOG_MODULEID_TXRX_RXBUF 6
+#define DBGLOG_MODULEID_WOW 7
+#define DBGLOG_MODULEID_WHAL 8
+#define DBGLOG_MODULEID_END
+
+#define DBGLOG_NUM_ARGS_OFFSET 30
+#define DBGLOG_NUM_ARGS_MASK 0xC0000000 /* Bit 30-31 */
+#define DBGLOG_NUM_ARGS_MAX 2 /* Upper limit is width of mask */
+
+#define DBGLOG_MODULE_LOG_ENABLE_OFFSET 0
+#define DBGLOG_MODULE_LOG_ENABLE_MASK 0x0000FFFF
+
+#define DBGLOG_REPORTING_ENABLED_OFFSET 16
+#define DBGLOG_REPORTING_ENABLED_MASK 0x00010000
+
+#define DBGLOG_TIMESTAMP_RESOLUTION_OFFSET 17
+#define DBGLOG_TIMESTAMP_RESOLUTION_MASK 0x000E0000
+
+#define DBGLOG_REPORT_SIZE_OFFSET 20
+#define DBGLOG_REPORT_SIZE_MASK 0x3FF00000
+
+#define DBGLOG_LOG_BUFFER_SIZE 1500
+#define DBGLOG_DBGID_DEFINITION_LEN_MAX 64
+
+struct dbglog_buf_s {
+ struct dbglog_buf_s *next;
+ A_INT8 *buffer;
+ A_UINT32 bufsize;
+ A_UINT32 length;
+ A_UINT32 count;
+ A_UINT32 free;
+};
+
+struct dbglog_hdr_s {
+ struct dbglog_buf_s *dbuf;
+ A_UINT32 dropped;
+};
+
+struct dbglog_config_s {
+ A_UINT32 cfgvalid; /* Mask with valid config bits */
+ union {
+ /* TODO: Take care of endianness */
+ struct {
+ A_UINT32 mmask:16; /* Mask of modules with logging on */
+ A_UINT32 rep:1; /* Reporting enabled or not */
+ A_UINT32 tsr:3; /* Time stamp resolution. Def: 1 ms */
+ A_UINT32 size:10; /* Report size in number of messages */
+ A_UINT32 reserved:2;
+ } dbglog_config;
+
+ A_UINT32 value;
+ } u;
+};
+
+#define cfgmmask u.dbglog_config.mmask
+#define cfgrep u.dbglog_config.rep
+#define cfgtsr u.dbglog_config.tsr
+#define cfgsize u.dbglog_config.size
+#define cfgvalue u.value
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_H_ */
--- /dev/null
+#ifndef _DBGLOG_API_H_
+#define _DBGLOG_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ * This file contains host side debug primitives.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "dbglog.h"
+
+#define DBGLOG_HOST_LOG_BUFFER_SIZE DBGLOG_LOG_BUFFER_SIZE
+
+#define DBGLOG_GET_DBGID(arg) \
+ ((arg & DBGLOG_DBGID_MASK) >> DBGLOG_DBGID_OFFSET)
+
+#define DBGLOG_GET_MODULEID(arg) \
+ ((arg & DBGLOG_MODULEID_MASK) >> DBGLOG_MODULEID_OFFSET)
+
+#define DBGLOG_GET_NUMARGS(arg) \
+ ((arg & DBGLOG_NUM_ARGS_MASK) >> DBGLOG_NUM_ARGS_OFFSET)
+
+#define DBGLOG_GET_TIMESTAMP(arg) \
+ ((arg & DBGLOG_TIMESTAMP_MASK) >> DBGLOG_TIMESTAMP_OFFSET)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_API_H_ */
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions of the debug identifiers for different
+ * modules.
+ *
+ */
+
+#ifndef _DBGLOG_ID_H_
+#define _DBGLOG_ID_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * The nomenclature for the debug identifiers is MODULE_DESCRIPTION.
+ * Please ensure that the definition of any new debugid introduced is captured
+ * between the <MODULE>_DBGID_DEFINITION_START and
+ * <MODULE>_DBGID_DEFINITION_END defines. The structure is required for the
+ * parser to correctly pick up the values for different debug identifiers.
+ */
+
+/* INF debug identifier definitions */
+#define INF_DBGID_DEFINITION_START
+#define INF_ASSERTION_FAILED 1
+#define INF_TARGET_ID 2
+#define INF_DBGID_DEFINITION_END
+
+/* WMI debug identifier definitions */
+#define WMI_DBGID_DEFINITION_START
+#define WMI_CMD_RX_XTND_PKT_TOO_SHORT 1
+#define WMI_EXTENDED_CMD_NOT_HANDLED 2
+#define WMI_CMD_RX_PKT_TOO_SHORT 3
+#define WMI_CALLING_WMI_EXTENSION_FN 4
+#define WMI_CMD_NOT_HANDLED 5
+#define WMI_IN_SYNC 6
+#define WMI_TARGET_WMI_SYNC_CMD 7
+#define WMI_SET_SNR_THRESHOLD_PARAMS 8
+#define WMI_SET_RSSI_THRESHOLD_PARAMS 9
+#define WMI_SET_LQ_TRESHOLD_PARAMS 10
+#define WMI_TARGET_CREATE_PSTREAM_CMD 11
+#define WMI_WI_DTM_INUSE 12
+#define WMI_TARGET_DELETE_PSTREAM_CMD 13
+#define WMI_TARGET_IMPLICIT_DELETE_PSTREAM_CMD 14
+#define WMI_TARGET_GET_BIT_RATE_CMD 15
+#define WMI_GET_RATE_MASK_CMD_FIX_RATE_MASK_IS 16
+#define WMI_TARGET_GET_AVAILABLE_CHANNELS_CMD 17
+#define WMI_TARGET_GET_TX_PWR_CMD 18
+#define WMI_FREE_EVBUF_WMIBUF 19
+#define WMI_FREE_EVBUF_DATABUF 20
+#define WMI_FREE_EVBUF_BADFLAG 21
+#define WMI_HTC_RX_ERROR_DATA_PACKET 22
+#define WMI_HTC_RX_SYNC_PAUSING_FOR_MBOX 23
+#define WMI_INCORRECT_WMI_DATA_HDR_DROPPING_PKT 24
+#define WMI_SENDING_READY_EVENT 25
+#define WMI_SETPOWER_MDOE_TO_MAXPERF 26
+#define WMI_SETPOWER_MDOE_TO_REC 27
+#define WMI_BSSINFO_EVENT_FROM 28
+#define WMI_TARGET_GET_STATS_CMD 29
+#define WMI_SENDING_SCAN_COMPLETE_EVENT 30
+#define WMI_SENDING_RSSI_INDB_THRESHOLD_EVENT 31
+#define WMI_SENDING_RSSI_INDBM_THRESHOLD_EVENT 32
+#define WMI_SENDING_LINK_QUALITY_THRESHOLD_EVENT 33
+#define WMI_SENDING_ERROR_REPORT_EVENT 34
+#define WMI_SENDING_CAC_EVENT 35
+#define WMI_TARGET_GET_ROAM_TABLE_CMD 36
+#define WMI_TARGET_GET_ROAM_DATA_CMD 37
+#define WMI_SENDING_GPIO_INTR_EVENT 38
+#define WMI_SENDING_GPIO_ACK_EVENT 39
+#define WMI_SENDING_GPIO_DATA_EVENT 40
+#define WMI_CMD_RX 41
+#define WMI_CMD_RX_XTND 42
+#define WMI_EVENT_SEND 43
+#define WMI_EVENT_SEND_XTND 44
+#define WMI_DBGID_DEFINITION_END
+
+/* CSERV debug identifier definitions */
+#define CSERV_DBGID_DEFINITION_START
+#define CSERV_BEGIN_SCAN1 1
+#define CSERV_BEGIN_SCAN2 2
+#define CSERV_END_SCAN1 3
+#define CSERV_END_SCAN2 4
+#define CSERV_CHAN_SCAN_START 5
+#define CSERV_CHAN_SCAN_STOP 6
+#define CSERV_CHANNEL_OPPPORTUNITY 7
+#define CSERV_NC_TIMEOUT 8
+#define CSERV_BACK_HOME 10
+#define CSERV_CHMGR_CH_CALLBACK1 11
+#define CSERV_CHMGR_CH_CALLBACK2 12
+#define CSERV_CHMGR_CH_CALLBACK3 13
+#define CSERV_SET_SCAN_PARAMS1 14
+#define CSERV_SET_SCAN_PARAMS2 15
+#define CSERV_SET_SCAN_PARAMS3 16
+#define CSERV_SET_SCAN_PARAMS4 17
+#define CSERV_ABORT_SCAN 18
+#define CSERV_NEWSTATE 19
+#define CSERV_MINCHMGR_OP_END 20
+#define CSERV_CHMGR_OP_END 21
+#define CSERV_DISCONNECT_TIMEOUT 22
+#define CSERV_ROAM_TIMEOUT 23
+#define CSERV_FORCE_SCAN1 24
+#define CSERV_FORCE_SCAN2 25
+#define CSERV_FORCE_SCAN3 26
+#define CSERV_UTIL_TIMEOUT 27
+#define CSERV_RSSIPOLLER 28
+#define CSERV_RETRY_CONNECT_TIMEOUT 29
+#define CSERV_RSSIINDBMPOLLER 30
+#define CSERV_BGSCAN_ENABLE 31
+#define CSERV_BGSCAN_DISABLE 32
+#define CSERV_WLAN_START_SCAN_CMD1 33
+#define CSERV_WLAN_START_SCAN_CMD2 34
+#define CSERV_WLAN_START_SCAN_CMD3 35
+#define CSERV_START_SCAN_CMD 36
+#define CSERV_START_FORCE_SCAN 37
+#define CSERV_NEXT_CHAN 38
+#define CSERV_SET_REGCODE 39
+#define CSERV_START_ADHOC 40
+#define CSERV_ADHOC_AT_HOME 41
+#define CSERV_OPT_AT_HOME 42
+#define CSERV_WLAN_CONNECT_CMD 43
+#define CSERV_WLAN_RECONNECT_CMD 44
+#define CSERV_WLAN_DISCONNECT_CMD 45
+#define CSERV_BSS_CHANGE_CHANNEL 46
+#define CSERV_BEACON_RX 47
+#define CSERV_KEEPALIVE_CHECK 48
+#define CSERV_RC_BEGIN_SCAN 49
+#define CSERV_RC_SCAN_START 50
+#define CSERV_RC_SCAN_STOP 51
+#define CSERV_RC_NEXT 52
+#define CSERV_RC_SCAN_END 53
+#define CSERV_PROBE_CALLBACK 54
+#define CSERV_ROAM1 55
+#define CSERV_ROAM2 56
+#define CSERV_ROAM3 57
+#define CSERV_CONNECT_EVENT 58
+#define CSERV_DISCONNECT_EVENT 59
+#define CSERV_BMISS_HANDLER1 60
+#define CSERV_BMISS_HANDLER2 61
+#define CSERV_BMISS_HANDLER3 62
+#define CSERV_LOWRSSI_HANDLER 63
+#define CSERV_WLAN_SET_PMKID_CMD 64
+#define CSERV_RECONNECT_REQUEST 65
+#define CSERV_KEYSPLUMBED_EVENT 66
+#define CSERV_NEW_REG 67
+#define CSERV_SET_RSSI_THOLD 68
+#define CSERV_RSSITHRESHOLDCHECK 69
+#define CSERV_RSSIINDBMTHRESHOLDCHECK 70
+#define CSERV_WLAN_SET_OPT_CMD1 71
+#define CSERV_WLAN_SET_OPT_CMD2 72
+#define CSERV_WLAN_SET_OPT_CMD3 73
+#define CSERV_WLAN_SET_OPT_CMD4 74
+#define CSERV_SCAN_CONNECT_STOP 75
+#define CSERV_BMISS_HANDLER4 76
+#define CSERV_INITIALIZE_TIMER 77
+#define CSERV_ARM_TIMER 78
+#define CSERV_DISARM_TIMER 79
+#define CSERV_UNINITIALIZE_TIMER 80
+#define CSERV_DISCONNECT_EVENT2 81
+#define CSERV_SCAN_CONNECT_START 82
+#define CSERV_BSSINFO_MEMORY_ALLOC_FAILED 83
+#define CSERV_SET_SCAN_PARAMS5 84
+#define CSERV_DBGID_DEFINITION_END
+
+/* TXRX debug identifier definitions */
+#define TXRX_TXBUF_DBGID_DEFINITION_START
+#define TXRX_TXBUF_ALLOCATE_BUF 1
+#define TXRX_TXBUF_QUEUE_BUF_TO_MBOX 2
+#define TXRX_TXBUF_QUEUE_BUF_TO_TXQ 3
+#define TXRX_TXBUF_TXQ_DEPTH 4
+#define TXRX_TXBUF_IBSS_QUEUE_TO_SFQ 5
+#define TXRX_TXBUF_IBSS_QUEUE_TO_TXQ_FRM_SFQ 6
+#define TXRX_TXBUF_INITIALIZE_TIMER 7
+#define TXRX_TXBUF_ARM_TIMER 8
+#define TXRX_TXBUF_DISARM_TIMER 9
+#define TXRX_TXBUF_UNINITIALIZE_TIMER 10
+#define TXRX_TXBUF_DBGID_DEFINITION_END
+
+#define TXRX_RXBUF_DBGID_DEFINITION_START
+#define TXRX_RXBUF_ALLOCATE_BUF 1
+#define TXRX_RXBUF_QUEUE_TO_HOST 2
+#define TXRX_RXBUF_QUEUE_TO_WLAN 3
+#define TXRX_RXBUF_ZERO_LEN_BUF 4
+#define TXRX_RXBUF_QUEUE_TO_HOST_LASTBUF_IN_RXCHAIN 5
+#define TXRX_RXBUF_LASTBUF_IN_RXCHAIN_ZEROBUF 6
+#define TXRX_RXBUF_QUEUE_EMPTY_QUEUE_TO_WLAN 7
+#define TXRX_RXBUF_SEND_TO_RECV_MGMT 8
+#define TXRX_RXBUF_SEND_TO_IEEE_LAYER 9
+#define TXRX_RXBUF_DBGID_DEFINITION_END
+
+#define TXRX_MGMTBUF_DBGID_DEFINITION_START
+#define TXRX_MGMTBUF_ALLOCATE_BUF 1
+#define TXRX_MGMTBUF_ALLOCATE_SM_BUF 2
+#define TXRX_MGMTBUF_ALLOCATE_RMBUF 3
+#define TXRX_MGMTBUF_GET_BUF 4
+#define TXRX_MGMTBUF_GET_SM_BUF 5
+#define TXRX_MGMTBUF_QUEUE_BUF_TO_TXQ 6
+#define TXRX_MGMTBUF_REAPED_BUF 7
+#define TXRX_MGMTBUF_REAPED_SM_BUF 8
+#define TXRX_MGMTBUF_WAIT_FOR_TXQ_DRAIN 9
+#define TXRX_MGMTBUF_WAIT_FOR_TXQ_SFQ_DRAIN 10
+#define TXRX_MGMTBUF_ENQUEUE_INTO_SFQ 11
+#define TXRX_MGMTBUF_DEQUEUE_FROM_SFQ 12
+#define TXRX_MGMTBUF_PAUSE_TXQ 13
+#define TXRX_MGMTBUF_RESUME_TXQ 14
+#define TXRX_MGMTBUF_WAIT_FORTXQ_DRAIN_TIMEOUT 15
+#define TXRX_MGMTBUF_DRAINQ 16
+#define TXRX_MGMTBUF_INDICATE_Q_DRAINED 17
+#define TXRX_MGMTBUF_DBGID_DEFINITION_END
+
+/* PM (Power Module) debug identifier definitions */
+#define PM_DBGID_DEFINITION_START
+#define PM_INIT 1
+#define PM_ENABLE 2
+#define PM_SET_STATE 3
+#define PM_SET_POWERMODE 4
+#define PM_CONN_NOTIFY 5
+#define PM_REF_COUNT_NEGATIVE 6
+#define PM_APSD_ENABLE 7
+#define PM_UPDATE_APSD_STATE 8
+#define PM_CHAN_OP_REQ 9
+#define PM_SET_MY_BEACON_POLICY 10
+#define PM_SET_ALL_BEACON_POLICY 11
+#define PM_SET_PM_PARAMS1 12
+#define PM_SET_PM_PARAMS2 13
+#define PM_ADHOC_SET_PM_CAPS_FAIL 14
+#define PM_ADHOC_UNKNOWN_IBSS_ATTRIB_ID 15
+#define PM_DBGID_DEFINITION_END
+
+/* Wake on Wireless debug identifier definitions */
+#define WOW_DBGID_DEFINITION_START
+#define WOW_INIT 1
+#define WOW_GET_CONFIG_DSET 2
+#define WOW_NO_CONFIG_DSET 3
+#define WOW_INVALID_CONFIG_DSET 4
+#define WOW_USE_DEFAULT_CONFIG 5
+#define WOW_SETUP_GPIO 6
+#define WOW_INIT_DONE 7
+#define WOW_SET_GPIO_PIN 8
+#define WOW_CLEAR_GPIO_PIN 9
+#define WOW_SET_WOW_MODE_CMD 10
+#define WOW_SET_HOST_MODE_CMD 11
+#define WOW_ADD_WOW_PATTERN_CMD 12
+#define WOW_NEW_WOW_PATTERN_AT_INDEX 13
+#define WOW_DEL_WOW_PATTERN_CMD 14
+#define WOW_LIST_CONTAINS_PATTERNS 15
+#define WOW_GET_WOW_LIST_CMD 16
+#define WOW_INVALID_FILTER_ID 17
+#define WOW_INVALID_FILTER_LISTID 18
+#define WOW_NO_VALID_FILTER_AT_ID 19
+#define WOW_NO_VALID_LIST_AT_ID 20
+#define WOW_NUM_PATTERNS_EXCEEDED 21
+#define WOW_NUM_LISTS_EXCEEDED 22
+#define WOW_GET_WOW_STATS 23
+#define WOW_CLEAR_WOW_STATS 24
+#define WOW_WAKEUP_HOST 25
+#define WOW_EVENT_WAKEUP_HOST 26
+#define WOW_EVENT_DISCARD 27
+#define WOW_PATTERN_MATCH 28
+#define WOW_PATTERN_NOT_MATCH 29
+#define WOW_PATTERN_NOT_MATCH_OFFSET 30
+#define WOW_DISABLED_HOST_ASLEEP 31
+#define WOW_ENABLED_HOST_ASLEEP_NO_PATTERNS 32
+#define WOW_ENABLED_HOST_ASLEEP_NO_MATCH_FOUND 33
+#define WOW_DBGID_DEFINITION_END
+
+/* WHAL debug identifier definitions */
+#define WHAL_DBGID_DEFINITION_START
+#define WHAL_ERROR_ANI_CONTROL 1
+#define WHAL_ERROR_CHIP_TEST1 2
+#define WHAL_ERROR_CHIP_TEST2 3
+#define WHAL_ERROR_EEPROM_CHECKSUM 4
+#define WHAL_ERROR_EEPROM_MACADDR 5
+#define WHAL_ERROR_INTERRUPT_HIU 6
+#define WHAL_ERROR_KEYCACHE_RESET 7
+#define WHAL_ERROR_KEYCACHE_SET 8
+#define WHAL_ERROR_KEYCACHE_TYPE 9
+#define WHAL_ERROR_KEYCACHE_TKIPENTRY 10
+#define WHAL_ERROR_KEYCACHE_WEPLENGTH 11
+#define WHAL_ERROR_PHY_INVALID_CHANNEL 12
+#define WHAL_ERROR_POWER_AWAKE 13
+#define WHAL_ERROR_POWER_SET 14
+#define WHAL_ERROR_RECV_STOPDMA 15
+#define WHAL_ERROR_RECV_STOPPCU 16
+#define WHAL_ERROR_RESET_CHANNF1 17
+#define WHAL_ERROR_RESET_CHANNF2 18
+#define WHAL_ERROR_RESET_PM 19
+#define WHAL_ERROR_RESET_OFFSETCAL 20
+#define WHAL_ERROR_RESET_RFGRANT 21
+#define WHAL_ERROR_RESET_RXFRAME 22
+#define WHAL_ERROR_RESET_STOPDMA 23
+#define WHAL_ERROR_RESET_RECOVER 24
+#define WHAL_ERROR_XMIT_COMPUTE 25
+#define WHAL_ERROR_XMIT_NOQUEUE 26
+#define WHAL_ERROR_XMIT_ACTIVEQUEUE 27
+#define WHAL_ERROR_XMIT_BADTYPE 28
+#define WHAL_DBGID_DEFINITION_END
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DBGLOG_ID_H_ */
--- /dev/null
+/*
+ *
+ * Double-link list definitions (adapted from Atheros SDIO stack)
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+#ifndef __DL_LIST_H___
+#define __DL_LIST_H___
+
+#define A_CONTAINING_STRUCT(address, struct_type, field_name)\
+ ((struct_type *)((A_UINT32)(address) - (A_UINT32)(&((struct_type *)0)->field_name)))
+
+/* list functions */
+/* pointers for the list */
+typedef struct _DL_LIST {
+ struct _DL_LIST *pPrev;
+ struct _DL_LIST *pNext;
+}DL_LIST, *PDL_LIST;
+/*
+ * DL_LIST_INIT , initialize doubly linked list
+*/
+#define DL_LIST_INIT(pList)\
+ {(pList)->pPrev = pList; (pList)->pNext = pList;}
+
+#define DL_LIST_IS_EMPTY(pList) (((pList)->pPrev == (pList)) && ((pList)->pNext == (pList)))
+#define DL_LIST_GET_ITEM_AT_HEAD(pList) (pList)->pNext
+#define DL_LIST_GET_ITEM_AT_TAIL(pList) (pList)->pPrev
+/*
+ * ITERATE_OVER_LIST pStart is the list, pTemp is a temp list member
+ * NOT: do not use this function if the items in the list are deleted inside the
+ * iteration loop
+*/
+#define ITERATE_OVER_LIST(pStart, pTemp) \
+ for((pTemp) =(pStart)->pNext; pTemp != (pStart); (pTemp) = (pTemp)->pNext)
+
+
+/* safe iterate macro that allows the item to be removed from the list
+ * the iteration continues to the next item in the list
+ */
+#define ITERATE_OVER_LIST_ALLOW_REMOVE(pStart,pItem,st,offset) \
+{ \
+ PDL_LIST pTemp; \
+ pTemp = (pStart)->pNext; \
+ while (pTemp != (pStart)) { \
+ (pItem) = A_CONTAINING_STRUCT(pTemp,st,offset); \
+ pTemp = pTemp->pNext; \
+
+#define ITERATE_END }}
+
+/*
+ * DL_ListInsertTail - insert pAdd to the end of the list
+*/
+static INLINE PDL_LIST DL_ListInsertTail(PDL_LIST pList, PDL_LIST pAdd) {
+ /* insert at tail */
+ pAdd->pPrev = pList->pPrev;
+ pAdd->pNext = pList;
+ pList->pPrev->pNext = pAdd;
+ pList->pPrev = pAdd;
+ return pAdd;
+}
+
+/*
+ * DL_ListInsertHead - insert pAdd into the head of the list
+*/
+static INLINE PDL_LIST DL_ListInsertHead(PDL_LIST pList, PDL_LIST pAdd) {
+ /* insert at head */
+ pAdd->pPrev = pList;
+ pAdd->pNext = pList->pNext;
+ pList->pNext->pPrev = pAdd;
+ pList->pNext = pAdd;
+ return pAdd;
+}
+
+#define DL_ListAdd(pList,pItem) DL_ListInsertHead((pList),(pItem))
+/*
+ * DL_ListRemove - remove pDel from list
+*/
+static INLINE PDL_LIST DL_ListRemove(PDL_LIST pDel) {
+ pDel->pNext->pPrev = pDel->pPrev;
+ pDel->pPrev->pNext = pDel->pNext;
+ /* point back to itself just to be safe, incase remove is called again */
+ pDel->pNext = pDel;
+ pDel->pPrev = pDel;
+ return pDel;
+}
+
+/*
+ * DL_ListRemoveItemFromHead - get a list item from the head
+*/
+static INLINE PDL_LIST DL_ListRemoveItemFromHead(PDL_LIST pList) {
+ PDL_LIST pItem = NULL;
+ if (pList->pNext != pList) {
+ pItem = pList->pNext;
+ /* remove the first item from head */
+ DL_ListRemove(pItem);
+ }
+ return pItem;
+}
+
+#endif /* __DL_LIST_H___ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/dset_api.h#1 $
+ *
+ * Host-side DataSet API.
+ *
+ */
+
+#ifndef _DSET_API_H_
+#define _DSET_API_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/*
+ * Host-side DataSet support is optional, and is not
+ * currently required for correct operation. To disable
+ * Host-side DataSet support, set this to 0.
+ */
+#ifndef CONFIG_HOST_DSET_SUPPORT
+#define CONFIG_HOST_DSET_SUPPORT 1
+#endif
+
+/* Called to send a DataSet Open Reply back to the Target. */
+A_STATUS wmi_dset_open_reply(struct wmi_t *wmip,
+ A_UINT32 status,
+ A_UINT32 access_cookie,
+ A_UINT32 size,
+ A_UINT32 version,
+ A_UINT32 targ_handle,
+ A_UINT32 targ_reply_fn,
+ A_UINT32 targ_reply_arg);
+
+/* Called to send a DataSet Data Reply back to the Target. */
+A_STATUS wmi_dset_data_reply(struct wmi_t *wmip,
+ A_UINT32 status,
+ A_UINT8 *host_buf,
+ A_UINT32 length,
+ A_UINT32 targ_buf,
+ A_UINT32 targ_reply_fn,
+ A_UINT32 targ_reply_arg);
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+
+#endif /* _DSET_API_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __DSET_INTERNAL_H__
+#define __DSET_INTERNAL_H__
+
+/*
+ * Internal dset definitions, common for DataSet layer.
+ */
+
+#define DSET_TYPE_STANDARD 0
+#define DSET_TYPE_BPATCHED 1
+#define DSET_TYPE_COMPRESSED 2
+
+/* Dataset descriptor */
+
+typedef struct dset_descriptor_s {
+ struct dset_descriptor_s *next; /* List link. NULL only at the last
+ descriptor */
+ A_UINT16 id; /* Dset ID */
+ A_UINT16 size; /* Dset size. */
+ void *DataPtr; /* Pointer to raw data for standard
+ DataSet or pointer to original
+ dset_descriptor for patched
+ DataSet */
+ A_UINT32 data_type; /* DSET_TYPE_*, above */
+
+ void *AuxPtr; /* Additional data that might
+ needed for data_type. For
+ example, pointer to patch
+ Dataset descriptor for BPatch. */
+} dset_descriptor_t;
+
+#endif /* __DSET_INTERNAL_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __DSETID_H__
+#define __DSETID_H__
+
+/* Well-known DataSet IDs */
+#define DSETID_UNUSED 0x00000000
+#define DSETID_BOARD_DATA 0x00000001 /* Cal and board data */
+#define DSETID_REGDB 0x00000002 /* Regulatory Database */
+#define DSETID_POWER_CONTROL 0x00000003 /* TX Pwr Lim & Ant Gain */
+#define DSETID_USER_CONFIG 0x00000004 /* User Configuration */
+
+#define DSETID_ANALOG_CONTROL_DATA_START 0x00000005
+#define DSETID_ANALOG_CONTROL_DATA_END 0x00000025
+/*
+ * Get DSETID for various reference clock speeds.
+ * For each speed there are three DataSets that correspond
+ * to the three columns of bank6 data (addr, 11a, 11b/g).
+ * This macro returns the dsetid of the first of those
+ * three DataSets.
+ */
+#define ANALOG_CONTROL_DATA_DSETID(refclk) \
+ (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk)
+
+/*
+ * There are TWO STARTUP_PATCH DataSets.
+ * DSETID_STARTUP_PATCH is historical, and was applied before BMI on
+ * earlier systems. On AR6002, it is applied after BMI, just like
+ * DSETID_STARTUP_PATCH2.
+ */
+#define DSETID_STARTUP_PATCH 0x00000026
+#define DSETID_GPIO_CONFIG_PATCH 0x00000027
+#define DSETID_WLANREGS 0x00000028 /* override wlan regs */
+#define DSETID_STARTUP_PATCH2 0x00000029
+
+#define DSETID_WOW_CONFIG 0x00000090 /* WoW Configuration */
+
+/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */
+#define DSETID_INI_DATA 0x00000100
+/* Reserved for WHAL INI Tables: 0x100..0x11f */
+#define DSETID_INI_DATA_END 0x0000011f
+
+#define DSETID_VENDOR_START 0x00010000 /* Vendor-defined DataSets */
+
+#define DSETID_INDEX_END 0xfffffffe /* Reserved to indicate the
+ end of a memory-based
+ DataSet Index */
+#define DSETID_INDEX_FREE 0xffffffff /* An unused index entry */
+
+/*
+ * PATCH DataSet format:
+ * A list of patches, terminated by a patch with
+ * address=PATCH_END.
+ *
+ * This allows for patches to be stored in flash.
+ */
+struct patch_s {
+ A_UINT32 *address;
+ A_UINT32 data;
+};
+
+/*
+ * Skip some patches. Can be used to erase a single patch in a
+ * patch DataSet without having to re-write the DataSet. May
+ * also be used to embed information for use by subsequent
+ * patch code. The "data" in a PATCH_SKIP tells how many
+ * bytes of length "patch_s" to skip.
+ */
+#define PATCH_SKIP ((A_UINT32 *)0x00000000)
+
+/*
+ * Execute code at the address specified by "data".
+ * The address of the patch structure is passed as
+ * the one parameter.
+ */
+#define PATCH_CODE_ABS ((A_UINT32 *)0x00000001)
+
+/*
+ * Same as PATCH_CODE_ABS, but treat "data" as an
+ * offset from the start of the patch word.
+ */
+#define PATCH_CODE_REL ((A_UINT32 *)0x00000002)
+
+/* Mark the end of this patch DataSet. */
+#define PATCH_END ((A_UINT32 *)0xffffffff)
+
+/*
+ * A DataSet which contains a Binary Patch to some other DataSet
+ * uses the original dsetid with the DSETID_BPATCH_FLAG bit set.
+ * Such a BPatch DataSet consists of BPatch metadata followed by
+ * the bdiff bytes. BPatch metadata consists of a single 32-bit
+ * word that contains the size of the BPatched final image.
+ *
+ * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff
+ * to create "diffs":
+ * bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs
+ * Then add BPatch metadata to the start of "diffs".
+ *
+ * NB: There are some implementation-induced restrictions
+ * on which DataSets can be BPatched.
+ */
+#define DSETID_BPATCH_FLAG 0x80000000
+
+#endif /* __DSETID_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#if defined(AR6001)
+#define GPIO_PIN_COUNT 18
+#else
+#define GPIO_PIN_COUNT 18
+#endif
+
+/*
+ * Possible values for WMIX_GPIO_SET_REGISTER_CMDID.
+ * NB: These match hardware order, so that addresses can
+ * easily be computed.
+ */
+#define GPIO_ID_OUT 0x00000000
+#define GPIO_ID_OUT_W1TS 0x00000001
+#define GPIO_ID_OUT_W1TC 0x00000002
+#define GPIO_ID_ENABLE 0x00000003
+#define GPIO_ID_ENABLE_W1TS 0x00000004
+#define GPIO_ID_ENABLE_W1TC 0x00000005
+#define GPIO_ID_IN 0x00000006
+#define GPIO_ID_STATUS 0x00000007
+#define GPIO_ID_STATUS_W1TS 0x00000008
+#define GPIO_ID_STATUS_W1TC 0x00000009
+#define GPIO_ID_PIN0 0x0000000a
+#define GPIO_ID_PIN(n) (GPIO_ID_PIN0+(n))
+
+#define GPIO_LAST_REGISTER_ID GPIO_ID_PIN(17)
+#define GPIO_ID_NONE 0xffffffff
--- /dev/null
+#ifndef _GPIO_API_H_
+#define _GPIO_API_H_
+/*
+ * Copyright 2005 Atheros Communications, Inc., All Rights Reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+/*
+ * Host-side General Purpose I/O API.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/gpio_api.h#1 $
+ */
+
+/*
+ * Send a command to the Target in order to change output on GPIO pins.
+ */
+A_STATUS wmi_gpio_output_set(struct wmi_t *wmip,
+ A_UINT32 set_mask,
+ A_UINT32 clear_mask,
+ A_UINT32 enable_mask,
+ A_UINT32 disable_mask);
+
+/*
+ * Send a command to the Target requesting input state of GPIO pins.
+ */
+A_STATUS wmi_gpio_input_get(struct wmi_t *wmip);
+
+/*
+ * Send a command to the Target to change the value of a GPIO register.
+ */
+A_STATUS wmi_gpio_register_set(struct wmi_t *wmip,
+ A_UINT32 gpioreg_id,
+ A_UINT32 value);
+
+/*
+ * Send a command to the Target to fetch the value of a GPIO register.
+ */
+A_STATUS wmi_gpio_register_get(struct wmi_t *wmip, A_UINT32 gpioreg_id);
+
+/*
+ * Send a command to the Target, acknowledging some GPIO interrupts.
+ */
+A_STATUS wmi_gpio_intr_ack(struct wmi_t *wmip, A_UINT32 ack_mask);
+
+#endif /* _GPIO_API_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ * HIF specific declarations and prototypes
+ */
+
+#ifndef _HIF_H_
+#define _HIF_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* Header files */
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+
+typedef struct htc_callbacks HTC_CALLBACKS;
+typedef struct hif_device HIF_DEVICE;
+
+/*
+ * direction - Direction of transfer (HIF_READ/HIF_WRITE).
+ */
+#define HIF_READ 0x00000001
+#define HIF_WRITE 0x00000002
+#define HIF_DIR_MASK (HIF_READ | HIF_WRITE)
+
+/*
+ * type - An interface may support different kind of read/write commands.
+ * The command type is divided into a basic and an extended command
+ * and can be specified using HIF_BASIC_IO/HIF_EXTENDED_IO.
+ */
+#define HIF_BASIC_IO 0x00000004
+#define HIF_EXTENDED_IO 0x00000008
+#define HIF_TYPE_MASK (HIF_BASIC_IO | HIF_EXTENDED_IO)
+
+/*
+ * emode - This indicates the whether the command is to be executed in a
+ * blocking or non-blocking fashion (HIF_SYNCHRONOUS/
+ * HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
+ * implemented using the asynchronous mode allowing the the bus
+ * driver to indicate the completion of operation through the
+ * registered callback routine. The requirement primarily comes
+ * from the contexts these operations get called from (a driver's
+ * transmit context or the ISR context in case of receive).
+ * Support for both of these modes is essential.
+ */
+#define HIF_SYNCHRONOUS 0x00000010
+#define HIF_ASYNCHRONOUS 0x00000020
+#define HIF_EMODE_MASK (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
+
+/*
+ * dmode - An interface may support different kinds of commands based on
+ * the tradeoff between the amount of data it can carry and the
+ * setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
+ * HIF_BLOCK_BASIS). In case of latter, the data is rounded off
+ * to the nearest block size by padding. The size of the block is
+ * configurable at compile time using the HIF_BLOCK_SIZE and is
+ * negotiated with the target during initialization after the
+ * dragon interrupts are enabled.
+ */
+#define HIF_BYTE_BASIS 0x00000040
+#define HIF_BLOCK_BASIS 0x00000080
+#define HIF_DMODE_MASK (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
+
+/*
+ * amode - This indicates if the address has to be incremented on dragon
+ * after every read/write operation (HIF?FIXED_ADDRESS/
+ * HIF_INCREMENTAL_ADDRESS).
+ */
+#define HIF_FIXED_ADDRESS 0x00000100
+#define HIF_INCREMENTAL_ADDRESS 0x00000200
+#define HIF_AMODE_MASK (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
+
+#define HIF_WR_ASYNC_BYTE_FIX \
+ (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_WR_ASYNC_BYTE_INC \
+ (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_ASYNC_BLOCK_INC \
+ (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_SYNC_BYTE_FIX \
+ (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_WR_SYNC_BYTE_INC \
+ (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_WR_SYNC_BLOCK_INC \
+ (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BYTE_INC \
+ (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BYTE_FIX \
+ (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BYTE_FIX \
+ (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BLOCK_FIX \
+ (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
+#define HIF_RD_ASYNC_BYTE_INC \
+ (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_ASYNC_BLOCK_INC \
+ (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+#define HIF_RD_SYNC_BLOCK_INC \
+ (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
+
+
+typedef enum {
+ HIF_DEVICE_POWER_STATE = 0,
+ HIF_DEVICE_GET_MBOX_BLOCK_SIZE,
+ HIF_DEVICE_GET_MBOX_ADDR,
+ HIF_DEVICE_GET_PENDING_EVENTS_FUNC,
+ HIF_DEVICE_GET_IRQ_PROC_MODE,
+ HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC,
+} HIF_DEVICE_CONFIG_OPCODE;
+
+/*
+ * HIF CONFIGURE definitions:
+ *
+ * HIF_DEVICE_GET_MBOX_BLOCK_SIZE
+ * input : none
+ * output : array of 4 A_UINT32s
+ * notes: block size is returned for each mailbox (4)
+ *
+ * HIF_DEVICE_GET_MBOX_ADDR
+ * input : none
+ * output : array of 4 A_UINT32
+ * notes: address is returned for each mailbox (4) in the array
+ *
+ * HIF_DEVICE_GET_PENDING_EVENTS_FUNC
+ * input : none
+ * output: HIF_PENDING_EVENTS_FUNC function pointer
+ * notes: this is optional for the HIF layer, if the request is
+ * not handled then it indicates that the upper layer can use
+ * the standard device methods to get pending events (IRQs, mailbox messages etc..)
+ * otherwise it can call the function pointer to check pending events.
+ *
+ * HIF_DEVICE_GET_IRQ_PROC_MODE
+ * input : none
+ * output : HIF_DEVICE_IRQ_PROCESSING_MODE (interrupt processing mode)
+ * note: the hif layer interfaces with the underlying OS-specific bus driver. The HIF
+ * layer can report whether IRQ processing is requires synchronous behavior or
+ * can be processed using asynchronous bus requests (typically faster).
+ *
+ * HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC
+ * input :
+ * output : HIF_MASK_UNMASK_RECV_EVENT function pointer
+ * notes: this is optional for the HIF layer. The HIF layer may require a special mechanism
+ * to mask receive message events. The upper layer can call this pointer when it needs
+ * to mask/unmask receive events (in case it runs out of buffers).
+ *
+ *
+ */
+
+typedef enum {
+ HIF_DEVICE_IRQ_SYNC_ONLY, /* for HIF implementations that require the DSR to process all
+ interrupts before returning */
+ HIF_DEVICE_IRQ_ASYNC_SYNC, /* for HIF implementations that allow DSR to process interrupts
+ using ASYNC I/O (that is HIFAckInterrupt can be called at a
+ later time */
+} HIF_DEVICE_IRQ_PROCESSING_MODE;
+
+#define HIF_MAX_DEVICES 1
+
+struct htc_callbacks {
+ A_UCHAR *name;
+ A_UINT32 id;
+ A_STATUS (* deviceInsertedHandler)(void *hif_handle);
+ A_STATUS (* deviceRemovedHandler)(void *htc_handle, A_STATUS status);
+ A_STATUS (* deviceSuspendHandler)(void *htc_handle);
+ A_STATUS (* deviceResumeHandler)(void *htc_handle);
+ A_STATUS (* deviceWakeupHandler)(void *htc_handle);
+ A_STATUS (* rwCompletionHandler)(void *context, A_STATUS status);
+ A_STATUS (* dsrHandler)(void *htc_handle);
+};
+
+
+#define HIF_OTHER_EVENTS (1 << 0) /* other interrupts (non-Recv) are pending, host
+ needs to read the register table to figure out what */
+#define HIF_RECV_MSG_AVAIL (1 << 1) /* pending recv packet */
+
+typedef struct _HIF_PENDING_EVENTS_INFO {
+ A_UINT32 Events;
+ A_UINT32 LookAhead;
+} HIF_PENDING_EVENTS_INFO;
+
+ /* function to get pending events , some HIF modules use special mechanisms
+ * to detect packet available and other interrupts */
+typedef A_STATUS ( *HIF_PENDING_EVENTS_FUNC)(HIF_DEVICE *device,
+ HIF_PENDING_EVENTS_INFO *pEvents,
+ void *AsyncContext);
+
+#define HIF_MASK_RECV TRUE
+#define HIF_UNMASK_RECV FALSE
+ /* function to mask recv events */
+typedef A_STATUS ( *HIF_MASK_UNMASK_RECV_EVENT)(HIF_DEVICE *device,
+ A_BOOL Mask,
+ void *AsyncContext);
+
+
+/*
+ * This API is used by the HTC layer to initialize the HIF layer and to
+ * register different callback routines. Support for following events has
+ * been captured - DSR, Read/Write completion, Device insertion/removal,
+ * Device suspension/resumption/wakeup. In addition to this, the API is
+ * also used to register the name and the revision of the chip. The latter
+ * can be used to verify the revision of the chip read from the device
+ * before reporting it to HTC.
+ */
+int HIFInit(HTC_CALLBACKS *callbacks);
+
+/*
+ * This API is used to provide the read/write interface over the specific bus
+ * interface.
+ * address - Starting address in the dragon's address space. For mailbox
+ * writes, it refers to the start of the mbox boundary. It should
+ * be ensured that the last byte falls on the mailbox's EOM. For
+ * mailbox reads, it refers to the end of the mbox boundary.
+ * buffer - Pointer to the buffer containg the data to be transmitted or
+ * received.
+ * length - Amount of data to be transmitted or received.
+ * request - Characterizes the attributes of the command.
+ */
+A_STATUS
+HIFReadWrite(HIF_DEVICE *device,
+ A_UINT32 address,
+ A_UCHAR *buffer,
+ A_UINT32 length,
+ A_UINT32 request,
+ void *context);
+
+/*
+ * This can be initiated from the unload driver context ie when the HTCShutdown
+ * routine is called.
+ */
+void HIFShutDownDevice(HIF_DEVICE *device);
+
+/*
+ * This should translate to an acknowledgment to the bus driver indicating that
+ * the previous interrupt request has been serviced and the all the relevant
+ * sources have been cleared. HTC is ready to process more interrupts.
+ * This should prevent the bus driver from raising an interrupt unless the
+ * previous one has been serviced and acknowledged using the previous API.
+ */
+void HIFAckInterrupt(HIF_DEVICE *device);
+
+void HIFMaskInterrupt(HIF_DEVICE *device);
+
+void HIFUnMaskInterrupt(HIF_DEVICE *device);
+
+/*
+ * This set of functions are to be used by the bus driver to notify
+ * the HIF module about various events.
+ * These are not implemented if the bus driver provides an alternative
+ * way for this notification though callbacks for instance.
+ */
+int HIFInsertEventNotify(void);
+
+int HIFRemoveEventNotify(void);
+
+int HIFIRQEventNotify(void);
+
+int HIFRWCompleteEventNotify(void);
+
+/*
+ * This function associates a opaque handle with the HIF layer
+ * to be used in communication with upper layer i.e. HTC.
+ * This would normaly be a pointer to htc_target data structure.
+ */
+void HIFSetHandle(void *hif_handle, void *handle);
+
+A_STATUS
+HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode,
+ void *config, A_UINT32 configLen);
+
+
+struct device;
+struct device*
+HIFGetOSDevice(HIF_DEVICE *device);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HIF_H_ */
--- /dev/null
+#ifndef _HOST_VERSION_H_
+#define _HOST_VERSION_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains version information for the sample host driver for the
+ * AR6000 chip
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/host_version.h#2 $
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <AR6K_version.h>
+
+/*
+ * The version number is made up of major, minor, patch and build
+ * numbers. These are 16 bit numbers. The build and release script will
+ * set the build number using a Perforce counter. Here the build number is
+ * set to 9999 so that builds done without the build-release script are easily
+ * identifiable.
+ */
+
+#define ATH_SW_VER_MAJOR __VER_MAJOR_
+#define ATH_SW_VER_MINOR __VER_MINOR_
+#define ATH_SW_VER_PATCH __VER_PATCH_
+#define ATH_SW_VER_BUILD 9999
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HOST_VERSION_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+
+#ifndef __HTC_H__
+#define __HTC_H__
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#define A_OFFSETOF(type,field) (int)(&(((type *)NULL)->field))
+
+#define ASSEMBLE_UNALIGNED_UINT16(p,highbyte,lowbyte) \
+ (((A_UINT16)(((A_UINT8 *)(p))[(highbyte)])) << 8 | (A_UINT16)(((A_UINT8 *)(p))[(lowbyte)]))
+
+/* alignment independent macros (little-endian) to fetch UINT16s or UINT8s from a
+ * structure using only the type and field name.
+ * Use these macros if there is the potential for unaligned buffer accesses. */
+#define A_GET_UINT16_FIELD(p,type,field) \
+ ASSEMBLE_UNALIGNED_UINT16(p,\
+ A_OFFSETOF(type,field) + 1, \
+ A_OFFSETOF(type,field))
+
+#define A_SET_UINT16_FIELD(p,type,field,value) \
+{ \
+ ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (A_UINT8)(value); \
+ ((A_UINT8 *)(p))[A_OFFSETOF(type,field) + 1] = (A_UINT8)((value) >> 8); \
+}
+
+#define A_GET_UINT8_FIELD(p,type,field) \
+ ((A_UINT8 *)(p))[A_OFFSETOF(type,field)]
+
+#define A_SET_UINT8_FIELD(p,type,field,value) \
+ ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (value)
+
+/****** DANGER DANGER ***************
+ *
+ * The frame header length and message formats defined herein were
+ * selected to accommodate optimal alignment for target processing. This reduces code
+ * size and improves performance.
+ *
+ * Any changes to the header length may alter the alignment and cause exceptions
+ * on the target. When adding to the message structures insure that fields are
+ * properly aligned.
+ *
+ */
+
+/* HTC frame header */
+typedef PREPACK struct _HTC_FRAME_HDR{
+ /* do not remove or re-arrange these fields, these are minimally required
+ * to take advantage of 4-byte lookaheads in some hardware implementations */
+ A_UINT8 EndpointID;
+ A_UINT8 Flags;
+ A_UINT16 PayloadLen; /* length of data (including trailer) that follows the header */
+
+ /***** end of 4-byte lookahead ****/
+
+ A_UINT8 ControlBytes[2];
+
+ /* message payload starts after the header */
+
+} POSTPACK HTC_FRAME_HDR;
+
+/* frame header flags */
+#define HTC_FLAGS_NEED_CREDIT_UPDATE (1 << 0)
+#define HTC_FLAGS_RECV_TRAILER (1 << 1)
+
+
+#define HTC_HDR_LENGTH (sizeof(HTC_FRAME_HDR))
+#define HTC_MAX_TRAILER_LENGTH 255
+#define HTC_MAX_PAYLOAD_LENGTH (2048 - sizeof(HTC_FRAME_HDR))
+
+/* HTC control message IDs */
+typedef enum {
+ HTC_MSG_READY_ID = 1,
+ HTC_MSG_CONNECT_SERVICE_ID = 2,
+ HTC_MSG_CONNECT_SERVICE_RESPONSE_ID = 3,
+ HTC_MSG_SETUP_COMPLETE_ID = 4,
+} HTC_MSG_IDS;
+
+#define HTC_MAX_CONTROL_MESSAGE_LENGTH 256
+
+/* base message ID header */
+typedef PREPACK struct {
+ A_UINT16 MessageID;
+} POSTPACK HTC_UNKNOWN_MSG;
+
+/* HTC ready message
+ * direction : target-to-host */
+typedef PREPACK struct {
+ A_UINT16 MessageID; /* ID */
+ A_UINT16 CreditCount; /* number of credits the target can offer */
+ A_UINT16 CreditSize; /* size of each credit */
+ A_UINT8 MaxEndpoints; /* maximum number of endpoints the target has resources for */
+ A_UINT8 _Pad1;
+} POSTPACK HTC_READY_MSG;
+
+#define HTC_SERVICE_META_DATA_MAX_LENGTH 128
+
+/* connect service
+ * direction : host-to-target */
+typedef PREPACK struct {
+ A_UINT16 MessageID;
+ A_UINT16 ServiceID; /* service ID of the service to connect to */
+ A_UINT16 ConnectionFlags; /* connection flags */
+
+#define HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE (1 << 2) /* reduce credit dribbling when
+ the host needs credits */
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK (0x3)
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_FOURTH 0x0
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF 0x1
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_THREE_FOURTHS 0x2
+#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_UNITY 0x3
+
+ A_UINT8 ServiceMetaLength; /* length of meta data that follows */
+ A_UINT8 _Pad1;
+
+ /* service-specific meta data starts after the header */
+
+} POSTPACK HTC_CONNECT_SERVICE_MSG;
+
+/* connect response
+ * direction : target-to-host */
+typedef PREPACK struct {
+ A_UINT16 MessageID;
+ A_UINT16 ServiceID; /* service ID that the connection request was made */
+ A_UINT8 Status; /* service connection status */
+ A_UINT8 EndpointID; /* assigned endpoint ID */
+ A_UINT16 MaxMsgSize; /* maximum expected message size on this endpoint */
+ A_UINT8 ServiceMetaLength; /* length of meta data that follows */
+ A_UINT8 _Pad1;
+
+ /* service-specific meta data starts after the header */
+
+} POSTPACK HTC_CONNECT_SERVICE_RESPONSE_MSG;
+
+typedef PREPACK struct {
+ A_UINT16 MessageID;
+ /* currently, no other fields */
+} POSTPACK HTC_SETUP_COMPLETE_MSG;
+
+
+/* connect response status codes */
+#define HTC_SERVICE_SUCCESS 0 /* success */
+#define HTC_SERVICE_NOT_FOUND 1 /* service could not be found */
+#define HTC_SERVICE_FAILED 2 /* specific service failed the connect */
+#define HTC_SERVICE_NO_RESOURCES 3 /* no resources (i.e. no more endpoints) */
+#define HTC_SERVICE_NO_MORE_EP 4 /* specific service is not allowing any more
+ endpoints */
+
+/* report record IDs */
+typedef enum {
+ HTC_RECORD_NULL = 0,
+ HTC_RECORD_CREDITS = 1,
+ HTC_RECORD_LOOKAHEAD = 2,
+} HTC_RPT_IDS;
+
+typedef PREPACK struct {
+ A_UINT8 RecordID; /* Record ID */
+ A_UINT8 Length; /* Length of record */
+} POSTPACK HTC_RECORD_HDR;
+
+typedef PREPACK struct {
+ A_UINT8 EndpointID; /* Endpoint that owns these credits */
+ A_UINT8 Credits; /* credits to report since last report */
+} POSTPACK HTC_CREDIT_REPORT;
+
+typedef PREPACK struct {
+ A_UINT8 PreValid; /* pre valid guard */
+ A_UINT8 LookAhead[4]; /* 4 byte lookahead */
+ A_UINT8 PostValid; /* post valid guard */
+
+ /* NOTE: the LookAhead array is guarded by a PreValid and Post Valid guard bytes.
+ * The PreValid bytes must equal the inverse of the PostValid byte */
+
+} POSTPACK HTC_LOOKAHEAD_REPORT;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+
+#endif /* __HTC_H__ */
+
--- /dev/null
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef _HTC_API_H_
+#define _HTC_API_H_
+
+#include <htc.h>
+#include <htc_services.h>
+#include "htc_packet.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/* TODO.. for BMI */
+#define ENDPOINT1 0
+// TODO -remove me, but we have to fix BMI first
+#define HTC_MAILBOX_NUM_MAX 4
+
+
+/* ------ Endpoint IDS ------ */
+typedef enum
+{
+ ENDPOINT_UNUSED = -1,
+ ENDPOINT_0 = 0,
+ ENDPOINT_1 = 1,
+ ENDPOINT_2 = 2,
+ ENDPOINT_3,
+ ENDPOINT_4,
+ ENDPOINT_5,
+ ENDPOINT_6,
+ ENDPOINT_7,
+ ENDPOINT_8,
+ ENDPOINT_MAX,
+} HTC_ENDPOINT_ID;
+
+/* this is the amount of header room required by users of HTC */
+#define HTC_HEADER_LEN HTC_HDR_LENGTH
+
+typedef void *HTC_HANDLE;
+
+typedef A_UINT16 HTC_SERVICE_ID;
+
+typedef struct _HTC_INIT_INFO {
+ void (*AddInstance)(HTC_HANDLE);
+ void (*DeleteInstance)(void *Instance);
+ void (*TargetFailure)(void *Instance, A_STATUS Status);
+} HTC_INIT_INFO;
+
+/* per service connection send completion */
+typedef void (*HTC_EP_SEND_PKT_COMPLETE)(void *,HTC_PACKET *);
+/* per service connection pkt received */
+typedef void (*HTC_EP_RECV_PKT)(void *,HTC_PACKET *);
+
+/* Optional per service connection receive buffer re-fill callback,
+ * On some OSes (like Linux) packets are allocated from a global pool and indicated up
+ * to the network stack. The driver never gets the packets back from the OS. For these OSes
+ * a refill callback can be used to allocate and re-queue buffers into HTC.
+ *
+ * On other OSes, the network stack can call into the driver's OS-specifc "return_packet" handler and
+ * the driver can re-queue these buffers into HTC. In this regard a refill callback is
+ * unnecessary */
+typedef void (*HTC_EP_RECV_REFILL)(void *, HTC_ENDPOINT_ID Endpoint);
+
+/* Optional per service connection callback when a send queue is full. This can occur if the
+ * host continues queueing up TX packets faster than credits can arrive
+ * To prevent the host (on some Oses like Linux) from continuously queueing packets
+ * and consuming resources, this callback is provided so that that the host
+ * can disable TX in the subsystem (i.e. network stack)
+ * Other OSes require a "per-packet" indication_RAW_STREAM_NUM_MAX for each completed TX packet, this
+ * closed loop mechanism will prevent the network stack from overunning the NIC */
+typedef void (*HTC_EP_SEND_QUEUE_FULL)(void *, HTC_ENDPOINT_ID Endpoint);
+/* Optional per service connection callback when a send queue is available for receive new packet. */
+typedef void (*HTC_EP_SEND_QUEUE_AVAIL)(void *, HTC_ENDPOINT_ID Endpoint);
+
+typedef struct _HTC_EP_CALLBACKS {
+ void *pContext; /* context for each callback */
+ HTC_EP_SEND_PKT_COMPLETE EpTxComplete; /* tx completion callback for connected endpoint */
+ HTC_EP_RECV_PKT EpRecv; /* receive callback for connected endpoint */
+ HTC_EP_RECV_REFILL EpRecvRefill; /* OPTIONAL receive re-fill callback for connected endpoint */
+ HTC_EP_SEND_QUEUE_FULL EpSendFull; /* OPTIONAL send full callback */
+ HTC_EP_SEND_QUEUE_AVAIL EpSendAvail; /* OPTIONAL send available callback */
+} HTC_EP_CALLBACKS;
+
+/* service connection information */
+typedef struct _HTC_SERVICE_CONNECT_REQ {
+ HTC_SERVICE_ID ServiceID; /* service ID to connect to */
+ A_UINT16 ConnectionFlags; /* connection flags, see htc protocol definition */
+ A_UINT8 *pMetaData; /* ptr to optional service-specific meta-data */
+ A_UINT8 MetaDataLength; /* optional meta data length */
+ HTC_EP_CALLBACKS EpCallbacks; /* endpoint callbacks */
+ int MaxSendQueueDepth; /* maximum depth of any send queue */
+} HTC_SERVICE_CONNECT_REQ;
+
+/* service connection response information */
+typedef struct _HTC_SERVICE_CONNECT_RESP {
+ A_UINT8 *pMetaData; /* caller supplied buffer to optional meta-data */
+ A_UINT8 BufferLength; /* length of caller supplied buffer */
+ A_UINT8 ActualLength; /* actual length of meta data */
+ HTC_ENDPOINT_ID Endpoint; /* endpoint to communicate over */
+ int MaxMsgLength; /* max length of all messages over this endpoint */
+ A_UINT8 ConnectRespCode; /* connect response code from target */
+} HTC_SERVICE_CONNECT_RESP;
+
+/* endpoint distribution structure */
+typedef struct _HTC_ENDPOINT_CREDIT_DIST {
+ struct _HTC_ENDPOINT_CREDIT_DIST *pNext;
+ struct _HTC_ENDPOINT_CREDIT_DIST *pPrev;
+ HTC_SERVICE_ID ServiceID; /* Service ID (set by HTC) */
+ HTC_ENDPOINT_ID Endpoint; /* endpoint for this distribution struct (set by HTC) */
+ A_UINT32 DistFlags; /* distribution flags, distribution function can
+ set default activity using SET_EP_ACTIVE() macro */
+ int TxCreditsNorm; /* credits for normal operation, anything above this
+ indicates the endpoint is over-subscribed, this field
+ is only relevant to the credit distribution function */
+ int TxCreditsMin; /* floor for credit distribution, this field is
+ only relevant to the credit distribution function */
+ int TxCreditsAssigned; /* number of credits assigned to this EP, this field
+ is only relevant to the credit dist function */
+ int TxCredits; /* current credits available, this field is used by
+ HTC to determine whether a message can be sent or
+ must be queued */
+ int TxCreditsToDist; /* pending credits to distribute on this endpoint, this
+ is set by HTC when credit reports arrive.
+ The credit distribution functions sets this to zero
+ when it distributes the credits */
+ int TxCreditsSeek; /* this is the number of credits that the current pending TX
+ packet needs to transmit. This is set by HTC when
+ and endpoint needs credits in order to transmit */
+ int TxCreditSize; /* size in bytes of each credit (set by HTC) */
+ int TxCreditsPerMaxMsg; /* credits required for a maximum sized messages (set by HTC) */
+ void *pHTCReserved; /* reserved for HTC use */
+} HTC_ENDPOINT_CREDIT_DIST;
+
+#define HTC_EP_ACTIVE (1 << 31)
+
+/* macro to check if an endpoint has gone active, useful for credit
+ * distributions */
+#define IS_EP_ACTIVE(epDist) ((epDist)->DistFlags & HTC_EP_ACTIVE)
+#define SET_EP_ACTIVE(epDist) (epDist)->DistFlags |= HTC_EP_ACTIVE
+
+ /* credit distibution code that is passed into the distrbution function,
+ * there are mandatory and optional codes that must be handled */
+typedef enum _HTC_CREDIT_DIST_REASON {
+ HTC_CREDIT_DIST_SEND_COMPLETE = 0, /* credits available as a result of completed
+ send operations (MANDATORY) resulting in credit reports */
+ HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1, /* a change in endpoint activity occured (OPTIONAL) */
+ HTC_CREDIT_DIST_SEEK_CREDITS, /* an endpoint needs to "seek" credits (OPTIONAL) */
+ HTC_DUMP_CREDIT_STATE /* for debugging, dump any state information that is kept by
+ the distribution function */
+} HTC_CREDIT_DIST_REASON;
+
+typedef void (*HTC_CREDIT_DIST_CALLBACK)(void *Context,
+ HTC_ENDPOINT_CREDIT_DIST *pEPList,
+ HTC_CREDIT_DIST_REASON Reason);
+
+typedef void (*HTC_CREDIT_INIT_CALLBACK)(void *Context,
+ HTC_ENDPOINT_CREDIT_DIST *pEPList,
+ int TotalCredits);
+
+ /* endpoint statistics action */
+typedef enum _HTC_ENDPOINT_STAT_ACTION {
+ HTC_EP_STAT_SAMPLE = 0, /* only read statistics */
+ HTC_EP_STAT_SAMPLE_AND_CLEAR = 1, /* sample and immediately clear statistics */
+ HTC_EP_STAT_CLEAR /* clear only */
+} HTC_ENDPOINT_STAT_ACTION;
+
+ /* endpoint statistics */
+typedef struct _HTC_ENDPOINT_STATS {
+ A_UINT32 TxCreditLowIndications; /* number of times the host set the credit-low flag in a send message on
+ this endpoint */
+ A_UINT32 TxIssued; /* running count of TX packets issued */
+ A_UINT32 TxCreditRpts; /* running count of total credit reports received for this endpoint */
+ A_UINT32 TxCreditRptsFromRx;
+ A_UINT32 TxCreditRptsFromOther;
+ A_UINT32 TxCreditRptsFromEp0;
+ A_UINT32 TxCreditsFromRx; /* count of credits received via Rx packets on this endpoint */
+ A_UINT32 TxCreditsFromOther; /* count of credits received via another endpoint */
+ A_UINT32 TxCreditsFromEp0; /* count of credits received via another endpoint */
+ A_UINT32 TxCreditsConsummed; /* count of consummed credits */
+ A_UINT32 TxCreditsReturned; /* count of credits returned */
+ A_UINT32 RxReceived; /* count of RX packets received */
+ A_UINT32 RxLookAheads; /* count of lookahead records
+ found in messages received on this endpoint */
+} HTC_ENDPOINT_STATS;
+
+/* ------ Function Prototypes ------ */
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Initialize HTC
+ @function name: HTCInit
+ @input: pInfo - initialization information
+ @output:
+ @return: A_OK on success
+ @notes: The caller initializes global HTC state and registers various instance
+ notification callbacks (see HTC_INIT_INFO).
+
+ @example:
+ @see also: HTCShutdown
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS HTCInit(HTC_INIT_INFO *pInfo);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Get the underlying HIF device handle
+ @function name: HTCGetHifDevice
+ @input: HTCHandle - handle passed into the AddInstance callback
+ @output:
+ @return: opaque HIF device handle usable in HIF API calls.
+ @notes:
+ @example:
+ @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void *HTCGetHifDevice(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Set the associated instance for the HTC handle
+ @function name: HTCSetInstance
+ @input: HTCHandle - handle passed into the AddInstance callback
+ Instance - caller supplied instance object
+ @output:
+ @return:
+ @notes: Caller must set the instance information for the HTC handle in order to receive
+ notifications for instance deletion (DeleteInstance callback is called) and for target
+ failure notification.
+ @example:
+ @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Set credit distribution parameters
+ @function name: HTCSetCreditDistribution
+ @input: HTCHandle - HTC handle
+ pCreditDistCont - caller supplied context to pass into distribution functions
+ CreditDistFunc - Distribution function callback
+ CreditDistInit - Credit Distribution initialization callback
+ ServicePriorityOrder - Array containing list of service IDs, lowest index is highest
+ priority
+ ListLength - number of elements in ServicePriorityOrder
+ @output:
+ @return:
+ @notes: The user can set a custom credit distribution function to handle special requirements
+ for each endpoint. A default credit distribution routine can be used by setting
+ CreditInitFunc to NULL. The default credit distribution is only provided for simple
+ "fair" credit distribution without regard to any prioritization.
+
+ @example:
+ @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void HTCSetCreditDistribution(HTC_HANDLE HTCHandle,
+ void *pCreditDistContext,
+ HTC_CREDIT_DIST_CALLBACK CreditDistFunc,
+ HTC_CREDIT_INIT_CALLBACK CreditInitFunc,
+ HTC_SERVICE_ID ServicePriorityOrder[],
+ int ListLength);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Wait for the target to indicate the HTC layer is ready
+ @function name: HTCWaitTarget
+ @input: HTCHandle - HTC handle
+ @output:
+ @return:
+ @notes: This API blocks until the target responds with an HTC ready message.
+ The caller should not connect services until the target has indicated it is
+ ready.
+ @example:
+ @see also: HTCConnectService
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Start target service communications
+ @function name: HTCStart
+ @input: HTCHandle - HTC handle
+ @output:
+ @return:
+ @notes: This API indicates to the target that the service connection phase is complete
+ and the target can freely start all connected services. This API should only be
+ called AFTER all service connections have been made. TCStart will issue a
+ SETUP_COMPLETE message to the target to indicate that all service connections
+ have been made and the target can start communicating over the endpoints.
+ @example:
+ @see also: HTCConnectService
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS HTCStart(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Add receive packet to HTC
+ @function name: HTCAddReceivePkt
+ @input: HTCHandle - HTC handle
+ pPacket - HTC receive packet to add
+ @output:
+ @return: A_OK on success
+ @notes: user must supply HTC packets for capturing incomming HTC frames. The caller
+ must initialize each HTC packet using the SET_HTC_PACKET_INFO_RX_REFILL()
+ macro.
+ @example:
+ @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Connect to an HTC service
+ @function name: HTCConnectService
+ @input: HTCHandle - HTC handle
+ pReq - connection details
+ @output: pResp - connection response
+ @return:
+ @notes: Service connections must be performed before HTCStart. User provides callback handlers
+ for various endpoint events.
+ @example:
+ @see also: HTCStart
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS HTCConnectService(HTC_HANDLE HTCHandle,
+ HTC_SERVICE_CONNECT_REQ *pReq,
+ HTC_SERVICE_CONNECT_RESP *pResp);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Send an HTC packet
+ @function name: HTCSendPkt
+ @input: HTCHandle - HTC handle
+ pPacket - packet to send
+ @output:
+ @return: A_OK
+ @notes: Caller must initialize packet using SET_HTC_PACKET_INFO_TX() macro.
+ This interface is fully asynchronous. On error, HTC SendPkt will
+ call the registered Endpoint callback to cleanup the packet.
+ @example:
+ @see also: HTCFlushEndpoint
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Stop HTC service communications
+ @function name: HTCStop
+ @input: HTCHandle - HTC handle
+ @output:
+ @return:
+ @notes: HTC communications is halted. All receive and pending TX packets will
+ be flushed.
+ @example:
+ @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void HTCStop(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Shutdown HTC
+ @function name: HTCShutdown
+ @input:
+ @output:
+ @return:
+ @notes: This cleans up all resources allocated by HTCInit().
+ @example:
+ @see also: HTCInit
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void HTCShutDown(void);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Flush pending TX packets
+ @function name: HTCFlushEndpoint
+ @input: HTCHandle - HTC handle
+ Endpoint - Endpoint to flush
+ Tag - flush tag
+ @output:
+ @return:
+ @notes: The Tag parameter is used to selectively flush packets with matching tags.
+ The value of 0 forces all packets to be flush regardless of tag.
+ @example:
+ @see also: HTCSendPkt
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Dump credit distribution state
+ @function name: HTCDumpCreditStates
+ @input: HTCHandle - HTC handle
+ @output:
+ @return:
+ @notes: This dumps all credit distribution information to the debugger
+ @example:
+ @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void HTCDumpCreditStates(HTC_HANDLE HTCHandle);
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Indicate a traffic activity change on an endpoint
+ @function name: HTCIndicateActivityChange
+ @input: HTCHandle - HTC handle
+ Endpoint - endpoint in which activity has changed
+ Active - TRUE if active, FALSE if it has become inactive
+ @output:
+ @return:
+ @notes: This triggers the registered credit distribution function to
+ re-adjust credits for active/inactive endpoints.
+ @example:
+ @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+void HTCIndicateActivityChange(HTC_HANDLE HTCHandle,
+ HTC_ENDPOINT_ID Endpoint,
+ A_BOOL Active);
+
+/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ @desc: Get endpoint statistics
+ @function name: HTCGetEndpointStatistics
+ @input: HTCHandle - HTC handle
+ Endpoint - Endpoint identifier
+ Action - action to take with statistics
+ @output:
+ pStats - statistics that were sampled (can be NULL if Action is HTC_EP_STAT_CLEAR)
+
+ @return: TRUE if statistics profiling is enabled, otherwise FALSE.
+
+ @notes: Statistics is a compile-time option and this function may return FALSE
+ if HTC is not compiled with profiling.
+
+ The caller can specify the statistic "action" to take when sampling
+ the statistics. This includes:
+
+ HTC_EP_STAT_SAMPLE: The pStats structure is filled with the current values.
+ HTC_EP_STAT_SAMPLE_AND_CLEAR: The structure is filled and the current statistics
+ are cleared.
+ HTC_EP_STAT_CLEA : the statistics are cleared, the called can pass a NULL value for
+ pStats
+
+ @example:
+ @see also:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
+A_BOOL HTCGetEndpointStatistics(HTC_HANDLE HTCHandle,
+ HTC_ENDPOINT_ID Endpoint,
+ HTC_ENDPOINT_STAT_ACTION Action,
+ HTC_ENDPOINT_STATS *pStats);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HTC_API_H_ */
--- /dev/null
+/*
+ *
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifndef HTC_PACKET_H_
+#define HTC_PACKET_H_
+
+
+#include "dl_list.h"
+
+struct _HTC_PACKET;
+
+typedef void (* HTC_PACKET_COMPLETION)(void *,struct _HTC_PACKET *);
+
+typedef A_UINT16 HTC_TX_TAG;
+
+typedef struct _HTC_TX_PACKET_INFO {
+ HTC_TX_TAG Tag; /* tag used to selective flush packets */
+} HTC_TX_PACKET_INFO;
+
+#define HTC_TX_PACKET_TAG_ALL 0 /* a tag of zero is reserved and used to flush ALL packets */
+#define HTC_TX_PACKET_TAG_INTERNAL 1 /* internal tags start here */
+#define HTC_TX_PACKET_TAG_USER_DEFINED (HTC_TX_PACKET_TAG_INTERNAL + 9) /* user-defined tags start here */
+
+typedef struct _HTC_RX_PACKET_INFO {
+ A_UINT32 Unused; /* for future use and to make compilers happy */
+} HTC_RX_PACKET_INFO;
+
+/* wrapper around endpoint-specific packets */
+typedef struct _HTC_PACKET {
+ DL_LIST ListLink; /* double link */
+ void *pPktContext; /* caller's per packet specific context */
+
+ A_UINT8 *pBufferStart; /* the true buffer start , the caller can
+ store the real buffer start here. In
+ receive callbacks, the HTC layer sets pBuffer
+ to the start of the payload past the header. This
+ field allows the caller to reset pBuffer when it
+ recycles receive packets back to HTC */
+ /*
+ * Pointer to the start of the buffer. In the transmit
+ * direction this points to the start of the payload. In the
+ * receive direction, however, the buffer when queued up
+ * points to the start of the HTC header but when returned
+ * to the caller points to the start of the payload
+ */
+ A_UINT8 *pBuffer; /* payload start (RX/TX) */
+ A_UINT32 BufferLength; /* length of buffer */
+ A_UINT32 ActualLength; /* actual length of payload */
+ int Endpoint; /* endpoint that this packet was sent/recv'd from */
+ A_STATUS Status; /* completion status */
+ union {
+ HTC_TX_PACKET_INFO AsTx; /* Tx Packet specific info */
+ HTC_RX_PACKET_INFO AsRx; /* Rx Packet specific info */
+ } PktInfo;
+
+ /* the following fields are for internal HTC use */
+ HTC_PACKET_COMPLETION Completion; /* completion */
+ void *pContext; /* HTC private completion context */
+ A_UINT32 HTCReserved; /* reserved */
+} HTC_PACKET;
+
+
+
+#define COMPLETE_HTC_PACKET(p,status) \
+{ \
+ (p)->Status = (status); \
+ (p)->Completion((p)->pContext,(p)); \
+}
+
+#define INIT_HTC_PACKET_INFO(p,b,len) \
+{ \
+ (p)->pBufferStart = (b); \
+ (p)->BufferLength = (len); \
+}
+
+/* macro to set an initial RX packet for refilling HTC */
+#define SET_HTC_PACKET_INFO_RX_REFILL(p,c,b,len,ep) \
+{ \
+ (p)->pPktContext = (c); \
+ (p)->pBuffer = (b); \
+ (p)->pBufferStart = (b); \
+ (p)->BufferLength = (len); \
+ (p)->Endpoint = (ep); \
+}
+
+/* fast macro to recycle an RX packet that will be re-queued to HTC */
+#define HTC_PACKET_RESET_RX(p) \
+ (p)->pBuffer = (p)->pBufferStart
+
+/* macro to set packet parameters for TX */
+#define SET_HTC_PACKET_INFO_TX(p,c,b,len,ep,tag) \
+{ \
+ (p)->pPktContext = (c); \
+ (p)->pBuffer = (b); \
+ (p)->ActualLength = (len); \
+ (p)->Endpoint = (ep); \
+ (p)->PktInfo.AsTx.Tag = (tag); \
+}
+
+/* HTC Packet Queueing Macros */
+typedef DL_LIST HTC_PACKET_QUEUE;
+/* initialize queue */
+#define INIT_HTC_PACKET_QUEUE(pQ) DL_LIST_INIT((pQ))
+/* enqueue HTC packet to the tail of the queue */
+#define HTC_PACKET_ENQUEUE(pQ,p) DL_ListInsertTail((pQ),&(p)->ListLink)
+/* test if a queue is empty */
+#define HTC_QUEUE_EMPTY(pQ) DL_LIST_IS_EMPTY((pQ))
+/* get packet at head without removing it */
+#define HTC_GET_PKT_AT_HEAD(pQ) A_CONTAINING_STRUCT((DL_LIST_GET_ITEM_AT_HEAD(pQ)),HTC_PACKET,ListLink);
+/* remove a packet from the current list it is linked to */
+#define HTC_PACKET_REMOVE(p) DL_ListRemove(&(p)->ListLink)
+
+/* dequeue an HTC packet from the head of the queue */
+static INLINE HTC_PACKET *HTC_PACKET_DEQUEUE(HTC_PACKET_QUEUE *queue) {
+ DL_LIST *pItem = DL_ListRemoveItemFromHead(queue);
+ if (pItem != NULL) {
+ return A_CONTAINING_STRUCT(pItem, HTC_PACKET, ListLink);
+ }
+ return NULL;
+}
+
+#endif /*HTC_PACKET_H_*/
--- /dev/null
+/*
+ * Copyright (c) 2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __HTC_SERVICES_H__
+#define __HTC_SERVICES_H__
+
+/* Current service IDs */
+
+typedef enum {
+ RSVD_SERVICE_GROUP = 0,
+ WMI_SERVICE_GROUP = 1,
+
+ HTC_TEST_GROUP = 254,
+ HTC_SERVICE_GROUP_LAST = 255
+}HTC_SERVICE_GROUP_IDS;
+
+#define MAKE_SERVICE_ID(group,index) \
+ (int)(((int)group << 8) | (int)(index))
+
+/* NOTE: service ID of 0x0000 is reserved and should never be used */
+#define HTC_CTRL_RSVD_SVC MAKE_SERVICE_ID(RSVD_SERVICE_GROUP,1)
+#define WMI_CONTROL_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,0)
+#define WMI_DATA_BE_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,1)
+#define WMI_DATA_BK_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,2)
+#define WMI_DATA_VI_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,3)
+#define WMI_DATA_VO_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,4)
+#define WMI_MAX_SERVICES 5
+
+/* raw stream service (i.e. flash, tcmd, calibration apps) */
+#define HTC_RAW_STREAMS_SVC MAKE_SERVICE_ID(HTC_TEST_GROUP,0)
+
+#endif /*HTC_SERVICES_H_*/
--- /dev/null
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2006 Atheros Communications, Inc.
+ *
+ * Wireless Network driver for Atheros AR6001
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _NET80211_IEEE80211_H_
+#define _NET80211_IEEE80211_H_
+
+#include "athstartpack.h"
+
+/*
+ * 802.11 protocol definitions.
+ */
+
+#define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */
+/* is 802.11 address multicast/broadcast? */
+#define IEEE80211_IS_MULTICAST(_a) (*(_a) & 0x01)
+#define IEEE80211_ADDR_EQ(addr1, addr2) \
+ (A_MEMCMP(addr1, addr2, IEEE80211_ADDR_LEN) == 0)
+
+#define IEEE80211_KEYBUF_SIZE 16
+#define IEEE80211_MICBUF_SIZE (8+8) /* space for both tx and rx */
+
+/*
+ * NB: these values are ordered carefully; there are lots of
+ * of implications in any reordering. In particular beware
+ * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY.
+ */
+#define IEEE80211_CIPHER_WEP 0
+#define IEEE80211_CIPHER_TKIP 1
+#define IEEE80211_CIPHER_AES_OCB 2
+#define IEEE80211_CIPHER_AES_CCM 3
+#define IEEE80211_CIPHER_CKIP 5
+#define IEEE80211_CIPHER_CCKM_KRK 6
+#define IEEE80211_CIPHER_NONE 7 /* pseudo value */
+
+#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE+1)
+
+#define IEEE80211_IS_VALID_WEP_CIPHER_LEN(len) \
+ (((len) == 5) || ((len) == 13) || ((len) == 16))
+
+
+
+/*
+ * generic definitions for IEEE 802.11 frames
+ */
+PREPACK struct ieee80211_frame {
+ A_UINT8 i_fc[2];
+ A_UINT8 i_dur[2];
+ A_UINT8 i_addr1[IEEE80211_ADDR_LEN];
+ A_UINT8 i_addr2[IEEE80211_ADDR_LEN];
+ A_UINT8 i_addr3[IEEE80211_ADDR_LEN];
+ A_UINT8 i_seq[2];
+ /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */
+ /* see below */
+} POSTPACK;
+
+#define IEEE80211_FC0_VERSION_MASK 0x03
+#define IEEE80211_FC0_VERSION_SHIFT 0
+#define IEEE80211_FC0_VERSION_0 0x00
+#define IEEE80211_FC0_TYPE_MASK 0x0c
+#define IEEE80211_FC0_TYPE_SHIFT 2
+#define IEEE80211_FC0_TYPE_MGT 0x00
+#define IEEE80211_FC0_TYPE_CTL 0x04
+#define IEEE80211_FC0_TYPE_DATA 0x08
+
+#define IEEE80211_FC0_SUBTYPE_MASK 0xf0
+#define IEEE80211_FC0_SUBTYPE_SHIFT 4
+/* for TYPE_MGT */
+#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00
+#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10
+#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20
+#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30
+#define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40
+#define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50
+#define IEEE80211_FC0_SUBTYPE_BEACON 0x80
+#define IEEE80211_FC0_SUBTYPE_ATIM 0x90
+#define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0
+#define IEEE80211_FC0_SUBTYPE_AUTH 0xb0
+#define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0
+/* for TYPE_CTL */
+#define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0
+#define IEEE80211_FC0_SUBTYPE_RTS 0xb0
+#define IEEE80211_FC0_SUBTYPE_CTS 0xc0
+#define IEEE80211_FC0_SUBTYPE_ACK 0xd0
+#define IEEE80211_FC0_SUBTYPE_CF_END 0xe0
+#define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0
+/* for TYPE_DATA (bit combination) */
+#define IEEE80211_FC0_SUBTYPE_DATA 0x00
+#define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10
+#define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20
+#define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30
+#define IEEE80211_FC0_SUBTYPE_NODATA 0x40
+#define IEEE80211_FC0_SUBTYPE_CFACK 0x50
+#define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60
+#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70
+#define IEEE80211_FC0_SUBTYPE_QOS 0x80
+#define IEEE80211_FC0_SUBTYPE_QOS_NULL 0xc0
+
+#define IEEE80211_FC1_DIR_MASK 0x03
+#define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */
+#define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */
+#define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */
+#define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */
+
+#define IEEE80211_FC1_MORE_FRAG 0x04
+#define IEEE80211_FC1_RETRY 0x08
+#define IEEE80211_FC1_PWR_MGT 0x10
+#define IEEE80211_FC1_MORE_DATA 0x20
+#define IEEE80211_FC1_WEP 0x40
+#define IEEE80211_FC1_ORDER 0x80
+
+#define IEEE80211_SEQ_FRAG_MASK 0x000f
+#define IEEE80211_SEQ_FRAG_SHIFT 0
+#define IEEE80211_SEQ_SEQ_MASK 0xfff0
+#define IEEE80211_SEQ_SEQ_SHIFT 4
+
+#define IEEE80211_NWID_LEN 32
+
+/*
+ * 802.11 rate set.
+ */
+#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */
+#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */
+
+#define WMM_NUM_AC 4 /* 4 AC categories */
+
+#define WMM_PARAM_ACI_M 0x60 /* Mask for ACI field */
+#define WMM_PARAM_ACI_S 5 /* Shift for ACI field */
+#define WMM_PARAM_ACM_M 0x10 /* Mask for ACM bit */
+#define WMM_PARAM_ACM_S 4 /* Shift for ACM bit */
+#define WMM_PARAM_AIFSN_M 0x0f /* Mask for aifsn field */
+#define WMM_PARAM_LOGCWMIN_M 0x0f /* Mask for CwMin field (in log) */
+#define WMM_PARAM_LOGCWMAX_M 0xf0 /* Mask for CwMax field (in log) */
+#define WMM_PARAM_LOGCWMAX_S 4 /* Shift for CwMax field */
+
+#define WMM_AC_TO_TID(_ac) ( \
+ ((_ac) == WMM_AC_VO) ? 6 : \
+ ((_ac) == WMM_AC_VI) ? 5 : \
+ ((_ac) == WMM_AC_BK) ? 1 : \
+ 0)
+
+#define TID_TO_WMM_AC(_tid) ( \
+ ((_tid) < 1) ? WMM_AC_BE : \
+ ((_tid) < 3) ? WMM_AC_BK : \
+ ((_tid) < 6) ? WMM_AC_VI : \
+ WMM_AC_VO)
+/*
+ * Management information element payloads.
+ */
+
+enum {
+ IEEE80211_ELEMID_SSID = 0,
+ IEEE80211_ELEMID_RATES = 1,
+ IEEE80211_ELEMID_FHPARMS = 2,
+ IEEE80211_ELEMID_DSPARMS = 3,
+ IEEE80211_ELEMID_CFPARMS = 4,
+ IEEE80211_ELEMID_TIM = 5,
+ IEEE80211_ELEMID_IBSSPARMS = 6,
+ IEEE80211_ELEMID_COUNTRY = 7,
+ IEEE80211_ELEMID_CHALLENGE = 16,
+ /* 17-31 reserved for challenge text extension */
+ IEEE80211_ELEMID_PWRCNSTR = 32,
+ IEEE80211_ELEMID_PWRCAP = 33,
+ IEEE80211_ELEMID_TPCREQ = 34,
+ IEEE80211_ELEMID_TPCREP = 35,
+ IEEE80211_ELEMID_SUPPCHAN = 36,
+ IEEE80211_ELEMID_CHANSWITCH = 37,
+ IEEE80211_ELEMID_MEASREQ = 38,
+ IEEE80211_ELEMID_MEASREP = 39,
+ IEEE80211_ELEMID_QUIET = 40,
+ IEEE80211_ELEMID_IBSSDFS = 41,
+ IEEE80211_ELEMID_ERP = 42,
+ IEEE80211_ELEMID_RSN = 48,
+ IEEE80211_ELEMID_XRATES = 50,
+ IEEE80211_ELEMID_TPC = 150,
+ IEEE80211_ELEMID_CCKM = 156,
+ IEEE80211_ELEMID_VENDOR = 221, /* vendor private */
+};
+
+#define ATH_OUI 0x7f0300 /* Atheros OUI */
+#define ATH_OUI_TYPE 0x01
+#define ATH_OUI_SUBTYPE 0x01
+#define ATH_OUI_VERSION 0x00
+
+#define WPA_OUI 0xf25000
+#define WPA_OUI_TYPE 0x01
+#define WPA_VERSION 1 /* current supported version */
+
+#define WPA_CSE_NULL 0x00
+#define WPA_CSE_WEP40 0x01
+#define WPA_CSE_TKIP 0x02
+#define WPA_CSE_CCMP 0x04
+#define WPA_CSE_WEP104 0x05
+
+#define WPA_ASE_NONE 0x00
+#define WPA_ASE_8021X_UNSPEC 0x01
+#define WPA_ASE_8021X_PSK 0x02
+
+#define RSN_OUI 0xac0f00
+#define RSN_VERSION 1 /* current supported version */
+
+#define RSN_CSE_NULL 0x00
+#define RSN_CSE_WEP40 0x01
+#define RSN_CSE_TKIP 0x02
+#define RSN_CSE_WRAP 0x03
+#define RSN_CSE_CCMP 0x04
+#define RSN_CSE_WEP104 0x05
+
+#define RSN_ASE_NONE 0x00
+#define RSN_ASE_8021X_UNSPEC 0x01
+#define RSN_ASE_8021X_PSK 0x02
+
+#define RSN_CAP_PREAUTH 0x01
+
+#define WMM_OUI 0xf25000
+#define WMM_OUI_TYPE 0x02
+#define WMM_INFO_OUI_SUBTYPE 0x00
+#define WMM_PARAM_OUI_SUBTYPE 0x01
+#define WMM_VERSION 1
+
+/* WMM stream classes */
+#define WMM_NUM_AC 4
+#define WMM_AC_BE 0 /* best effort */
+#define WMM_AC_BK 1 /* background */
+#define WMM_AC_VI 2 /* video */
+#define WMM_AC_VO 3 /* voice */
+
+/* TSPEC related */
+#define ACTION_CATEGORY_CODE_TSPEC 17
+#define ACTION_CODE_TSPEC_ADDTS 0
+#define ACTION_CODE_TSPEC_ADDTS_RESP 1
+#define ACTION_CODE_TSPEC_DELTS 2
+
+typedef enum {
+ TSPEC_STATUS_CODE_ADMISSION_ACCEPTED = 0,
+ TSPEC_STATUS_CODE_ADDTS_INVALID_PARAMS = 0x1,
+ TSPEC_STATUS_CODE_ADDTS_REQUEST_REFUSED = 0x3,
+ TSPEC_STATUS_CODE_UNSPECIFIED_QOS_RELATED_FAILURE = 0xC8,
+ TSPEC_STATUS_CODE_REQUESTED_REFUSED_POLICY_CONFIGURATION = 0xC9,
+ TSPEC_STATUS_CODE_INSUFFCIENT_BANDWIDTH = 0xCA,
+ TSPEC_STATUS_CODE_INVALID_PARAMS = 0xCB,
+ TSPEC_STATUS_CODE_DELTS_SENT = 0x30,
+ TSPEC_STATUS_CODE_DELTS_RECV = 0x31,
+} TSPEC_STATUS_CODE;
+
+/*
+ * WMM/802.11e Tspec Element
+ */
+typedef PREPACK struct wmm_tspec_ie_t {
+ A_UINT8 elementId;
+ A_UINT8 len;
+ A_UINT8 oui[3];
+ A_UINT8 ouiType;
+ A_UINT8 ouiSubType;
+ A_UINT8 version;
+ A_UINT16 tsInfo_info;
+ A_UINT8 tsInfo_reserved;
+ A_UINT16 nominalMSDU;
+ A_UINT16 maxMSDU;
+ A_UINT32 minServiceInt;
+ A_UINT32 maxServiceInt;
+ A_UINT32 inactivityInt;
+ A_UINT32 suspensionInt;
+ A_UINT32 serviceStartTime;
+ A_UINT32 minDataRate;
+ A_UINT32 meanDataRate;
+ A_UINT32 peakDataRate;
+ A_UINT32 maxBurstSize;
+ A_UINT32 delayBound;
+ A_UINT32 minPhyRate;
+ A_UINT16 sba;
+ A_UINT16 mediumTime;
+} POSTPACK WMM_TSPEC_IE;
+
+
+/*
+ * BEACON management packets
+ *
+ * octet timestamp[8]
+ * octet beacon interval[2]
+ * octet capability information[2]
+ * information element
+ * octet elemid
+ * octet length
+ * octet information[length]
+ */
+
+#define IEEE80211_BEACON_INTERVAL(beacon) \
+ ((beacon)[8] | ((beacon)[9] << 8))
+#define IEEE80211_BEACON_CAPABILITY(beacon) \
+ ((beacon)[10] | ((beacon)[11] << 8))
+
+#define IEEE80211_CAPINFO_ESS 0x0001
+#define IEEE80211_CAPINFO_IBSS 0x0002
+#define IEEE80211_CAPINFO_CF_POLLABLE 0x0004
+#define IEEE80211_CAPINFO_CF_POLLREQ 0x0008
+#define IEEE80211_CAPINFO_PRIVACY 0x0010
+#define IEEE80211_CAPINFO_SHORT_PREAMBLE 0x0020
+#define IEEE80211_CAPINFO_PBCC 0x0040
+#define IEEE80211_CAPINFO_CHNL_AGILITY 0x0080
+/* bits 8-9 are reserved */
+#define IEEE80211_CAPINFO_SHORT_SLOTTIME 0x0400
+#define IEEE80211_CAPINFO_APSD 0x0800
+/* bit 12 is reserved */
+#define IEEE80211_CAPINFO_DSSSOFDM 0x2000
+/* bits 14-15 are reserved */
+
+/*
+ * Authentication Modes
+ */
+
+enum ieee80211_authmode {
+ IEEE80211_AUTH_NONE = 0,
+ IEEE80211_AUTH_OPEN = 1,
+ IEEE80211_AUTH_SHARED = 2,
+ IEEE80211_AUTH_8021X = 3,
+ IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */
+ /* NB: these are used only for ioctls */
+ IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x */
+ IEEE80211_AUTH_WPA_PSK = 6, /* WPA/RSN w/ PSK */
+ IEEE80211_AUTH_WPA_CCKM = 7, /* WPA/RSN IE w/ CCKM */
+};
+
+#include "athendpack.h"
+
+#endif /* _NET80211_IEEE80211_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $
+ */
+
+#ifndef _IEEE80211_IOCTL_H_
+#define _IEEE80211_IOCTL_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Extracted from the MADWIFI net80211/ieee80211_ioctl.h
+ */
+
+/*
+ * WPA/RSN get/set key request. Specify the key/cipher
+ * type and whether the key is to be used for sending and/or
+ * receiving. The key index should be set only when working
+ * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
+ * Otherwise a unicast/pairwise key is specified by the bssid
+ * (on a station) or mac address (on an ap). They key length
+ * must include any MIC key data; otherwise it should be no
+ more than IEEE80211_KEYBUF_SIZE.
+ */
+struct ieee80211req_key {
+ u_int8_t ik_type; /* key/cipher type */
+ u_int8_t ik_pad;
+ u_int16_t ik_keyix; /* key index */
+ u_int8_t ik_keylen; /* key length in bytes */
+ u_int8_t ik_flags;
+#define IEEE80211_KEY_XMIT 0x01
+#define IEEE80211_KEY_RECV 0x02
+#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */
+ u_int8_t ik_macaddr[IEEE80211_ADDR_LEN];
+ u_int64_t ik_keyrsc; /* key receive sequence counter */
+ u_int64_t ik_keytsc; /* key transmit sequence counter */
+ u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
+};
+/*
+ * Delete a key either by index or address. Set the index
+ * to IEEE80211_KEYIX_NONE when deleting a unicast key.
+ */
+struct ieee80211req_del_key {
+ u_int8_t idk_keyix; /* key index */
+ u_int8_t idk_macaddr[IEEE80211_ADDR_LEN];
+};
+/*
+ * MLME state manipulation request. IEEE80211_MLME_ASSOC
+ * only makes sense when operating as a station. The other
+ * requests can be used when operating as a station or an
+ * ap (to effect a station).
+ */
+struct ieee80211req_mlme {
+ u_int8_t im_op; /* operation to perform */
+#define IEEE80211_MLME_ASSOC 1 /* associate station */
+#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */
+#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */
+#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */
+#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */
+ u_int16_t im_reason; /* 802.11 reason code */
+ u_int8_t im_macaddr[IEEE80211_ADDR_LEN];
+};
+
+struct ieee80211req_addpmkid {
+ u_int8_t pi_bssid[IEEE80211_ADDR_LEN];
+ u_int8_t pi_enable;
+ u_int8_t pi_pmkid[16];
+};
+
+#define AUTH_ALG_OPEN_SYSTEM 0x01
+#define AUTH_ALG_SHARED_KEY 0x02
+#define AUTH_ALG_LEAP 0x04
+
+struct ieee80211req_authalg {
+ u_int8_t auth_alg;
+};
+
+/*
+ * Request to add an IE to a Management Frame
+ */
+enum{
+ IEEE80211_APPIE_FRAME_BEACON = 0,
+ IEEE80211_APPIE_FRAME_PROBE_REQ = 1,
+ IEEE80211_APPIE_FRAME_PROBE_RESP = 2,
+ IEEE80211_APPIE_FRAME_ASSOC_REQ = 3,
+ IEEE80211_APPIE_FRAME_ASSOC_RESP = 4,
+ IEEE80211_APPIE_NUM_OF_FRAME = 5
+};
+
+/*
+ * The Maximum length of the IE that can be added to a Management frame
+ */
+#define IEEE80211_APPIE_FRAME_MAX_LEN 78
+
+struct ieee80211req_getset_appiebuf {
+ u_int32_t app_frmtype; /* management frame type for which buffer is added */
+ u_int32_t app_buflen; /*application supplied buffer length */
+ u_int8_t app_buf[];
+};
+
+/*
+ * The following definitions are used by an application to set filter
+ * for receiving management frames
+ */
+enum {
+ IEEE80211_FILTER_TYPE_BEACON = 0x1,
+ IEEE80211_FILTER_TYPE_PROBE_REQ = 0x2,
+ IEEE80211_FILTER_TYPE_PROBE_RESP = 0x4,
+ IEEE80211_FILTER_TYPE_ASSOC_REQ = 0x8,
+ IEEE80211_FILTER_TYPE_ASSOC_RESP = 0x10,
+ IEEE80211_FILTER_TYPE_AUTH = 0x20,
+ IEEE80211_FILTER_TYPE_DEAUTH = 0x40,
+ IEEE80211_FILTER_TYPE_DISASSOC = 0x80,
+ IEEE80211_FILTER_TYPE_ALL = 0xFF /* used to check the valid filter bits */
+};
+
+struct ieee80211req_set_filter {
+ u_int32_t app_filterype; /* management frame filter type */
+};
+
+enum {
+ IEEE80211_PARAM_AUTHMODE = 3, /* Authentication Mode */
+ IEEE80211_PARAM_MCASTCIPHER = 5,
+ IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */
+ IEEE80211_PARAM_UCASTCIPHER = 8,
+ IEEE80211_PARAM_UCASTKEYLEN = 9, /* unicast key length */
+ IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */
+ IEEE80211_PARAM_ROAMING = 12, /* roaming mode */
+ IEEE80211_PARAM_PRIVACY = 13, /* privacy invoked */
+ IEEE80211_PARAM_COUNTERMEASURES = 14, /* WPA/TKIP countermeasures */
+ IEEE80211_PARAM_DROPUNENCRYPTED = 15, /* discard unencrypted frames */
+};
+
+/*
+ * Values for IEEE80211_PARAM_WPA
+ */
+#define WPA_MODE_WPA1 1
+#define WPA_MODE_WPA2 2
+#define WPA_MODE_AUTO 3
+#define WPA_MODE_NONE 4
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _IEEE80211_IOCTL_H_ */
--- /dev/null
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2006 Atheros Communications, Inc.
+ *
+ * Wireless Network driver for Atheros AR6001
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _IEEE80211_NODE_H_
+#define _IEEE80211_NODE_H_
+
+/*
+ * Node locking definitions.
+ */
+#define IEEE80211_NODE_LOCK_INIT(_nt) A_MUTEX_INIT(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_DESTROY(_nt)
+#define IEEE80211_NODE_LOCK(_nt) A_MUTEX_LOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_UNLOCK(_nt) A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_BH(_nt) A_MUTEX_LOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_UNLOCK_BH(_nt) A_MUTEX_UNLOCK(&(_nt)->nt_nodelock)
+#define IEEE80211_NODE_LOCK_ASSERT(_nt)
+
+/*
+ * Node reference counting definitions.
+ *
+ * ieee80211_node_initref initialize the reference count to 1
+ * ieee80211_node_incref add a reference
+ * ieee80211_node_decref remove a reference
+ * ieee80211_node_dectestref remove a reference and return 1 if this
+ * is the last reference, otherwise 0
+ * ieee80211_node_refcnt reference count for printing (only)
+ */
+#define ieee80211_node_initref(_ni) ((_ni)->ni_refcnt = 1)
+#define ieee80211_node_incref(_ni) ((_ni)->ni_refcnt++)
+#define ieee80211_node_decref(_ni) ((_ni)->ni_refcnt--)
+#define ieee80211_node_dectestref(_ni) (((_ni)->ni_refcnt--) == 0)
+#define ieee80211_node_refcnt(_ni) ((_ni)->ni_refcnt)
+
+#define IEEE80211_NODE_HASHSIZE 32
+/* simple hash is enough for variation of macaddr */
+#define IEEE80211_NODE_HASH(addr) \
+ (((const A_UINT8 *)(addr))[IEEE80211_ADDR_LEN - 1] % \
+ IEEE80211_NODE_HASHSIZE)
+
+/*
+ * Table of ieee80211_node instances. Each ieee80211com
+ * has at least one for holding the scan candidates.
+ * When operating as an access point or in ibss mode there
+ * is a second table for associated stations or neighbors.
+ */
+struct ieee80211_node_table {
+ void *nt_wmip; /* back reference */
+ A_MUTEX_T nt_nodelock; /* on node table */
+ struct bss *nt_node_first; /* information of all nodes */
+ struct bss *nt_node_last; /* information of all nodes */
+ struct bss *nt_hash[IEEE80211_NODE_HASHSIZE];
+ const char *nt_name; /* for debugging */
+ A_UINT32 nt_scangen; /* gen# for timeout scan */
+ A_TIMER nt_inact_timer;
+ A_UINT8 isTimerArmed; /* is the node timer armed */
+};
+
+#define WLAN_NODE_INACT_TIMEOUT_MSEC 10000
+
+#endif /* _IEEE80211_NODE_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+#ifndef _INI_DSET_H_
+#define _INI_DSET_H_
+
+/*
+ * Each of these represents a WHAL INI table, which consists
+ * of an "address column" followed by 1 or more "value columns".
+ *
+ * Software uses the base WHAL_INI_DATA_ID+column to access a
+ * DataSet that holds a particular column of data.
+ */
+typedef enum {
+ WHAL_INI_DATA_ID_NULL =0,
+ WHAL_INI_DATA_ID_MODE_SPECIFIC =1, /* 2,3 */
+ WHAL_INI_DATA_ID_COMMON =4, /* 5 */
+ WHAL_INI_DATA_ID_BB_RFGAIN =6, /* 7,8 */
+ WHAL_INI_DATA_ID_ANALOG_BANK1 =9, /* 10 */
+ WHAL_INI_DATA_ID_ANALOG_BANK2 =11, /* 12 */
+ WHAL_INI_DATA_ID_ANALOG_BANK3 =13, /* 14, 15 */
+ WHAL_INI_DATA_ID_ANALOG_BANK6 =16, /* 17, 18 */
+ WHAL_INI_DATA_ID_ANALOG_BANK7 =19, /* 20 */
+ WHAL_INI_DATA_ID_MODE_OVERRIDES =21, /* 22,23 */
+ WHAL_INI_DATA_ID_COMMON_OVERRIDES =24, /* 25 */
+
+ WHAL_INI_DATA_ID_MAX =25
+} WHAL_INI_DATA_ID;
+
+typedef PREPACK struct {
+ A_UINT16 freqIndex; // 1 - A mode 2 - B or G mode 0 - common
+ A_UINT16 offset;
+ A_UINT32 newValue;
+} POSTPACK INI_DSET_REG_OVERRIDE;
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005 Atheros Communications, Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This module contains the header files for regulatory module,
+ * which include the DB schema and DB values.
+ * $Id:
+ */
+
+#ifndef __REG_DB_H__
+#define __REG_DB_H__
+
+#include "./regulatory/reg_dbschema.h"
+#include "./regulatory/reg_dbvalues.h"
+
+#endif /* __REG_DB_H__ */
--- /dev/null
+#ifndef __REGDUMP_H__
+#define __REGDUMP_H__
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+#if defined(AR6001)
+#include "AR6001/AR6001_regdump.h"
+#endif
+#if defined(AR6002)
+#include "AR6002/AR6002_regdump.h"
+#endif
+
+#if !defined(__ASSEMBLER__)
+/*
+ * Target CPU state at the time of failure is reflected
+ * in a register dump, which the Host can fetch through
+ * the diagnostic window.
+ */
+struct register_dump_s {
+ A_UINT32 target_id; /* Target ID */
+ A_UINT32 assline; /* Line number (if assertion failure) */
+ A_UINT32 pc; /* Program Counter at time of exception */
+ A_UINT32 badvaddr; /* Virtual address causing exception */
+ CPU_exception_frame_t exc_frame; /* CPU-specific exception info */
+
+ /* Could copy top of stack here, too.... */
+};
+#endif /* __ASSEMBLER__ */
+#endif /* __REGDUMP_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __TARGADDRS_H__
+#define __TARGADDRS_H__
+#if defined(AR6001)
+#include "AR6001/addrs.h"
+#endif
+#if defined(AR6002)
+#include "AR6002/addrs.h"
+#endif
+
+/*
+ * AR6K option bits, to enable/disable various features.
+ * By default, all option bits are 0.
+ * These bits can be set in LOCAL_SCRATCH register 0.
+ */
+#define AR6K_OPTION_BMI_DISABLE 0x01 /* Disable BMI comm with Host */
+#define AR6K_OPTION_SERIAL_ENABLE 0x02 /* Enable serial port msgs */
+#define AR6K_OPTION_WDT_DISABLE 0x04 /* WatchDog Timer override */
+#define AR6K_OPTION_SLEEP_DISABLE 0x08 /* Disable system sleep */
+#define AR6K_OPTION_STOP_BOOT 0x10 /* Stop boot processes (for ATE) */
+#define AR6K_OPTION_ENABLE_NOANI 0x20 /* Operate without ANI */
+#define AR6K_OPTION_DSET_DISABLE 0x40 /* Ignore DataSets */
+#define AR6K_OPTION_IGNORE_FLASH 0x80 /* Ignore flash during bootup */
+
+/*
+ * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
+ * host_interest structure. It must match the address of the _host_interest
+ * symbol (see linker script).
+ *
+ * Host Interest is shared between Host and Target in order to coordinate
+ * between the two, and is intended to remain constant (with additions only
+ * at the end) across software releases.
+ */
+#define AR6001_HOST_INTEREST_ADDRESS 0x80000600
+#define AR6002_HOST_INTEREST_ADDRESS 0x00500400
+
+#define HOST_INTEREST_MAX_SIZE 0x100
+
+#if !defined(__ASSEMBLER__)
+struct register_dump_s;
+struct dbglog_hdr_s;
+
+/*
+ * These are items that the Host may need to access
+ * via BMI or via the Diagnostic Window. The position
+ * of items in this structure must remain constant
+ * across firmware revisions!
+ *
+ * Types for each item must be fixed size across
+ * target and host platforms.
+ *
+ * More items may be added at the end.
+ */
+struct host_interest_s {
+ /*
+ * Pointer to application-defined area, if any.
+ * Set by Target application during startup.
+ */
+ A_UINT32 hi_app_host_interest; /* 0x00 */
+
+ /* Pointer to register dump area, valid after Target crash. */
+ A_UINT32 hi_failure_state; /* 0x04 */
+
+ /* Pointer to debug logging header */
+ A_UINT32 hi_dbglog_hdr; /* 0x08 */
+
+ /* Indicates whether or not flash is present on Target.
+ * NB: flash_is_present indicator is here not just
+ * because it might be of interest to the Host; but
+ * also because it's set early on by Target's startup
+ * asm code and we need it to have a special RAM address
+ * so that it doesn't get reinitialized with the rest
+ * of data.
+ */
+ A_UINT32 hi_flash_is_present; /* 0x0c */
+
+ /*
+ * General-purpose flag bits, similar to AR6000_OPTION_* flags.
+ * Can be used by application rather than by OS.
+ */
+ A_UINT32 hi_option_flag; /* 0x10 */
+
+ /*
+ * Boolean that determines whether or not to
+ * display messages on the serial port.
+ */
+ A_UINT32 hi_serial_enable; /* 0x14 */
+
+ /* Start address of Flash DataSet index, if any */
+ A_UINT32 hi_dset_list_head; /* 0x18 */
+
+ /* Override Target application start address */
+ A_UINT32 hi_app_start; /* 0x1c */
+
+ /* Clock and voltage tuning */
+ A_UINT32 hi_skip_clock_init; /* 0x20 */
+ A_UINT32 hi_core_clock_setting; /* 0x24 */
+ A_UINT32 hi_cpu_clock_setting; /* 0x28 */
+ A_UINT32 hi_system_sleep_setting; /* 0x2c */
+ A_UINT32 hi_xtal_control_setting; /* 0x30 */
+ A_UINT32 hi_pll_ctrl_setting_24ghz; /* 0x34 */
+ A_UINT32 hi_pll_ctrl_setting_5ghz; /* 0x38 */
+ A_UINT32 hi_ref_voltage_trim_setting; /* 0x3c */
+ A_UINT32 hi_clock_info; /* 0x40 */
+
+ /*
+ * Flash configuration overrides, used only
+ * when firmware is not executing from flash.
+ * (When using flash, modify the global variables
+ * with equivalent names.)
+ */
+ A_UINT32 hi_bank0_addr_value; /* 0x44 */
+ A_UINT32 hi_bank0_read_value; /* 0x48 */
+ A_UINT32 hi_bank0_write_value; /* 0x4c */
+ A_UINT32 hi_bank0_config_value; /* 0x50 */
+
+ /* Pointer to Board Data */
+ A_UINT32 hi_board_data; /* 0x54 */
+ A_UINT32 hi_board_data_initialized; /* 0x58 */
+
+ A_UINT32 hi_dset_RAM_index_table; /* 0x5c */
+
+ A_UINT32 hi_desired_baud_rate; /* 0x60 */
+ A_UINT32 hi_dbglog_config; /* 0x64 */
+ A_UINT32 hi_end_RAM_reserve_sz; /* 0x68 */
+ A_UINT32 hi_mbox_io_block_sz; /* 0x6c */
+
+ A_UINT32 hi_num_bpatch_streams; /* 0x70 */
+ A_UINT32 hi_mbox_isr_yield_limit; /* 0x74 */
+
+ A_UINT32 hi_refclk_hz; /* 0x78 */
+};
+
+/* Bits defined in hi_option_flag */
+#define HI_OPTION_TIMER_WAR 1 /* not really used */
+
+/*
+ * Intended for use by Host software, this macro returns the Target RAM
+ * address of any item in the host_interest structure.
+ * Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data);
+ */
+#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \
+ ((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item)))
+
+#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \
+ ((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item)))
+
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __TARGADDRS_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef TESTCMD_H_
+#define TESTCMD_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ZEROES_PATTERN = 0,
+ ONES_PATTERN,
+ REPEATING_10,
+ PN7_PATTERN,
+ PN9_PATTERN,
+ PN15_PATTERN
+}TX_DATA_PATTERN;
+
+/* Continous tx
+ mode : TCMD_CONT_TX_OFF - Disabling continous tx
+ TCMD_CONT_TX_SINE - Enable continuous unmodulated tx
+ TCMD_CONT_TX_FRAME- Enable continuous modulated tx
+ freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g)
+dataRate: 0 - 1 Mbps
+ 1 - 2 Mbps
+ 2 - 5.5 Mbps
+ 3 - 11 Mbps
+ 4 - 6 Mbps
+ 5 - 9 Mbps
+ 6 - 12 Mbps
+ 7 - 18 Mbps
+ 8 - 24 Mbps
+ 9 - 36 Mbps
+ 10 - 28 Mbps
+ 11 - 54 Mbps
+ txPwr: Tx power in dBm[5 -11] for unmod Tx, [5-14] for mod Tx
+antenna: 1 - one antenna
+ 2 - two antenna
+Note : Enable/disable continuous tx test cmd works only when target is awake.
+*/
+
+typedef enum {
+ TCMD_CONT_TX_OFF = 0,
+ TCMD_CONT_TX_SINE,
+ TCMD_CONT_TX_FRAME,
+ TCMD_CONT_TX_TX99,
+ TCMD_CONT_TX_TX100
+} TCMD_CONT_TX_MODE;
+
+typedef PREPACK struct {
+ A_UINT32 testCmdId;
+ A_UINT32 mode;
+ A_UINT32 freq;
+ A_UINT32 dataRate;
+ A_INT32 txPwr;
+ A_UINT32 antenna;
+ A_UINT32 enANI;
+ A_UINT32 scramblerOff;
+ A_UINT32 aifsn;
+ A_UINT16 pktSz;
+ A_UINT16 txPattern;
+} POSTPACK TCMD_CONT_TX;
+
+#define TCMD_TXPATTERN_ZERONE 0x1
+#define TCMD_TXPATTERN_ZERONE_DIS_SCRAMBLE 0x2
+
+/* Continuous Rx
+ act: TCMD_CONT_RX_PROMIS - promiscuous mode (accept all incoming frames)
+ TCMD_CONT_RX_FILTER - filter mode (accept only frames with dest
+ address equal specified
+ mac address (set via act =3)
+ TCMD_CONT_RX_REPORT off mode (disable cont rx mode and get the
+ report from the last cont
+ Rx test)
+
+ TCMD_CONT_RX_SETMAC - set MacAddr mode (sets the MAC address for the
+ target. This Overrides
+ the default MAC address.)
+
+*/
+typedef enum {
+ TCMD_CONT_RX_PROMIS =0,
+ TCMD_CONT_RX_FILTER,
+ TCMD_CONT_RX_REPORT,
+ TCMD_CONT_RX_SETMAC
+} TCMD_CONT_RX_ACT;
+
+typedef PREPACK struct {
+ A_UINT32 testCmdId;
+ A_UINT32 act;
+ A_UINT32 enANI;
+ PREPACK union {
+ struct PREPACK TCMD_CONT_RX_PARA {
+ A_UINT32 freq;
+ A_UINT32 antenna;
+ } POSTPACK para;
+ struct PREPACK TCMD_CONT_RX_REPORT {
+ A_UINT32 totalPkt;
+ A_INT32 rssiInDBm;
+ } POSTPACK report;
+ struct PREPACK TCMD_CONT_RX_MAC {
+ A_UCHAR addr[ATH_MAC_LEN];
+ } POSTPACK mac;
+ } POSTPACK u;
+} POSTPACK TCMD_CONT_RX;
+
+/* Force sleep/wake test cmd
+ mode: TCMD_PM_WAKEUP - Wakeup the target
+ TCMD_PM_SLEEP - Force the target to sleep.
+ */
+typedef enum {
+ TCMD_PM_WAKEUP = 1, /* be consistent with target */
+ TCMD_PM_SLEEP
+} TCMD_PM_MODE;
+
+typedef PREPACK struct {
+ A_UINT32 testCmdId;
+ A_UINT32 mode;
+} POSTPACK TCMD_PM;
+
+typedef enum{
+ TCMD_CONT_TX_ID,
+ TCMD_CONT_RX_ID,
+ TCMD_PM_ID
+ } TCMD_ID;
+
+typedef PREPACK union {
+ TCMD_CONT_TX contTx;
+ TCMD_CONT_RX contRx;
+ TCMD_PM pm ;
+} POSTPACK TEST_CMD;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* TESTCMD_H_ */
--- /dev/null
+#ifndef _HOST_WLAN_API_H_
+#define _HOST_WLAN_API_H_
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the API for the host wlan module
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wlan_api.h#1 $
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct ieee80211_node_table;
+struct ieee80211_frame;
+
+struct ieee80211_common_ie {
+ A_UINT16 ie_chan;
+ A_UINT8 *ie_tstamp;
+ A_UINT8 *ie_ssid;
+ A_UINT8 *ie_rates;
+ A_UINT8 *ie_xrates;
+ A_UINT8 *ie_country;
+ A_UINT8 *ie_wpa;
+ A_UINT8 *ie_rsn;
+ A_UINT8 *ie_wmm;
+ A_UINT8 *ie_ath;
+ A_UINT16 ie_capInfo;
+ A_UINT16 ie_beaconInt;
+ A_UINT8 *ie_tim;
+ A_UINT8 *ie_chswitch;
+ A_UINT8 ie_erp;
+ A_UINT8 *ie_wsc;
+};
+
+typedef struct bss {
+ A_UINT8 ni_macaddr[6];
+ A_UINT8 ni_snr;
+ A_INT16 ni_rssi;
+ struct bss *ni_list_next;
+ struct bss *ni_list_prev;
+ struct bss *ni_hash_next;
+ struct bss *ni_hash_prev;
+ struct ieee80211_common_ie ni_cie;
+ A_UINT8 *ni_buf;
+ struct ieee80211_node_table *ni_table;
+ A_UINT32 ni_refcnt;
+ int ni_scangen;
+ A_UINT32 ni_tstamp;
+} bss_t;
+
+typedef void wlan_node_iter_func(void *arg, bss_t *);
+
+bss_t *wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size);
+void wlan_node_free(bss_t *ni);
+void wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
+ const A_UINT8 *macaddr);
+bss_t *wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr);
+void wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni);
+void wlan_free_allnodes(struct ieee80211_node_table *nt);
+void wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
+ void *arg);
+
+void wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt);
+void wlan_node_table_reset(struct ieee80211_node_table *nt);
+void wlan_node_table_cleanup(struct ieee80211_node_table *nt);
+
+A_STATUS wlan_parse_beacon(A_UINT8 *buf, int framelen,
+ struct ieee80211_common_ie *cie);
+
+A_UINT16 wlan_ieee2freq(int chan);
+A_UINT32 wlan_freq2ieee(A_UINT16 freq);
+
+
+bss_t *
+wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
+ A_UINT32 ssidLength, A_BOOL bIsWPA2);
+
+void
+wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HOST_WLAN_API_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2007 Atheros Communications, Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ */
+
+#ifndef __WLAN_DSET_H__
+#define __WKAN_DSET_H__
+
+typedef PREPACK struct wow_config_dset {
+
+ A_UINT8 valid_dset;
+ A_UINT8 gpio_enable;
+ A_UINT16 gpio_pin;
+} POSTPACK WOW_CONFIG_DSET;
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains the definitions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI). It includes definitions of all the
+ * commands and events. Commands are messages from the host to the WM.
+ * Events and Replies are messages from the WM to the host.
+ *
+ * Ownership of correctness in regards to WMI commands
+ * belongs to the host driver and the WM is not required to validate
+ * parameters for value, proper range, or any other checking.
+ *
+ */
+
+#ifndef _WMI_H_
+#define _WMI_H_
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include "wmix.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define WMI_PROTOCOL_VERSION 0x0002
+#define WMI_PROTOCOL_REVISION 0x0000
+
+#define ATH_MAC_LEN 6 /* length of mac in bytes */
+#define WMI_CMD_MAX_LEN 100
+#define WMI_CONTROL_MSG_MAX_LEN 256
+#define WMI_OPT_CONTROL_MSG_MAX_LEN 1536
+#define IS_ETHERTYPE(_typeOrLen) ((_typeOrLen) >= 0x0600)
+#define RFC1042OUI {0x00, 0x00, 0x00}
+
+#define IP_ETHERTYPE 0x0800
+
+#define WMI_IMPLICIT_PSTREAM 0xFF
+#define WMI_MAX_THINSTREAM 15
+
+struct host_app_area_s {
+ A_UINT32 wmi_protocol_ver;
+};
+
+/*
+ * Data Path
+ */
+typedef PREPACK struct {
+ A_UINT8 dstMac[ATH_MAC_LEN];
+ A_UINT8 srcMac[ATH_MAC_LEN];
+ A_UINT16 typeOrLen;
+} POSTPACK ATH_MAC_HDR;
+
+typedef PREPACK struct {
+ A_UINT8 dsap;
+ A_UINT8 ssap;
+ A_UINT8 cntl;
+ A_UINT8 orgCode[3];
+ A_UINT16 etherType;
+} POSTPACK ATH_LLC_SNAP_HDR;
+
+typedef enum {
+ DATA_MSGTYPE = 0x0,
+ CNTL_MSGTYPE,
+ SYNC_MSGTYPE
+} WMI_MSG_TYPE;
+
+
+typedef PREPACK struct {
+ A_INT8 rssi;
+ A_UINT8 info; /* WMI_MSG_TYPE in lower 2 bits - b1b0 */
+ /* UP in next 3 bits - b4b3b2 */
+#define WMI_DATA_HDR_MSG_TYPE_MASK 0x03
+#define WMI_DATA_HDR_MSG_TYPE_SHIFT 0
+#define WMI_DATA_HDR_UP_MASK 0x07
+#define WMI_DATA_HDR_UP_SHIFT 2
+#define WMI_DATA_HDR_IS_MSG_TYPE(h, t) (((h)->info & (WMI_DATA_HDR_MSG_TYPE_MASK)) == (t))
+} POSTPACK WMI_DATA_HDR;
+
+
+#define WMI_DATA_HDR_SET_MSG_TYPE(h, t) (h)->info = (((h)->info & ~(WMI_DATA_HDR_MSG_TYPE_MASK << WMI_DATA_HDR_MSG_TYPE_SHIFT)) | (t << WMI_DATA_HDR_MSG_TYPE_SHIFT))
+#define WMI_DATA_HDR_SET_UP(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_UP_MASK << WMI_DATA_HDR_UP_SHIFT)) | (p << WMI_DATA_HDR_UP_SHIFT))
+
+/*
+ * Control Path
+ */
+typedef PREPACK struct {
+ A_UINT16 commandId;
+} POSTPACK WMI_CMD_HDR; /* used for commands and events */
+
+/*
+ * List of Commnands
+ */
+typedef enum {
+ WMI_CONNECT_CMDID = 0x0001,
+ WMI_RECONNECT_CMDID,
+ WMI_DISCONNECT_CMDID,
+ WMI_SYNCHRONIZE_CMDID,
+ WMI_CREATE_PSTREAM_CMDID,
+ WMI_DELETE_PSTREAM_CMDID,
+ WMI_START_SCAN_CMDID,
+ WMI_SET_SCAN_PARAMS_CMDID,
+ WMI_SET_BSS_FILTER_CMDID,
+ WMI_SET_PROBED_SSID_CMDID,
+ WMI_SET_LISTEN_INT_CMDID,
+ WMI_SET_BMISS_TIME_CMDID,
+ WMI_SET_DISC_TIMEOUT_CMDID,
+ WMI_GET_CHANNEL_LIST_CMDID,
+ WMI_SET_BEACON_INT_CMDID,
+ WMI_GET_STATISTICS_CMDID,
+ WMI_SET_CHANNEL_PARAMS_CMDID,
+ WMI_SET_POWER_MODE_CMDID,
+ WMI_SET_IBSS_PM_CAPS_CMDID,
+ WMI_SET_POWER_PARAMS_CMDID,
+ WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
+ WMI_ADD_CIPHER_KEY_CMDID,
+ WMI_DELETE_CIPHER_KEY_CMDID,
+ WMI_ADD_KRK_CMDID,
+ WMI_DELETE_KRK_CMDID,
+ WMI_SET_PMKID_CMDID,
+ WMI_SET_TX_PWR_CMDID,
+ WMI_GET_TX_PWR_CMDID,
+ WMI_SET_ASSOC_INFO_CMDID,
+ WMI_ADD_BAD_AP_CMDID,
+ WMI_DELETE_BAD_AP_CMDID,
+ WMI_SET_TKIP_COUNTERMEASURES_CMDID,
+ WMI_RSSI_THRESHOLD_PARAMS_CMDID,
+ WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
+ WMI_SET_ACCESS_PARAMS_CMDID,
+ WMI_SET_RETRY_LIMITS_CMDID,
+ WMI_SET_OPT_MODE_CMDID,
+ WMI_OPT_TX_FRAME_CMDID,
+ WMI_SET_VOICE_PKT_SIZE_CMDID,
+ WMI_SET_MAX_SP_LEN_CMDID,
+ WMI_SET_ROAM_CTRL_CMDID,
+ WMI_GET_ROAM_TBL_CMDID,
+ WMI_GET_ROAM_DATA_CMDID,
+ WMI_ENABLE_RM_CMDID,
+ WMI_SET_MAX_OFFHOME_DURATION_CMDID,
+ WMI_EXTENSION_CMDID, /* Non-wireless extensions */
+ WMI_SNR_THRESHOLD_PARAMS_CMDID,
+ WMI_LQ_THRESHOLD_PARAMS_CMDID,
+ WMI_SET_LPREAMBLE_CMDID,
+ WMI_SET_RTS_CMDID,
+ WMI_CLR_RSSI_SNR_CMDID,
+ WMI_SET_FIXRATES_CMDID,
+ WMI_GET_FIXRATES_CMDID,
+ WMI_SET_AUTH_MODE_CMDID,
+ WMI_SET_REASSOC_MODE_CMDID,
+ WMI_SET_WMM_CMDID,
+ WMI_SET_WMM_TXOP_CMDID,
+ WMI_TEST_CMDID,
+ WMI_SET_BT_STATUS_CMDID,
+ WMI_SET_BT_PARAMS_CMDID,
+
+ WMI_SET_KEEPALIVE_CMDID,
+ WMI_GET_KEEPALIVE_CMDID,
+ WMI_SET_APPIE_CMDID,
+ WMI_GET_APPIE_CMDID,
+ WMI_SET_WSC_STATUS_CMDID,
+
+ /* Wake on Wireless */
+ WMI_SET_HOST_SLEEP_MODE_CMDID,
+ WMI_SET_WOW_MODE_CMDID,
+ WMI_GET_WOW_LIST_CMDID,
+ WMI_ADD_WOW_PATTERN_CMDID,
+ WMI_DEL_WOW_PATTERN_CMDID,
+ WMI_SET_MAC_ADDRESS_CMDID,
+ WMI_SET_AKMP_PARAMS_CMDID,
+ WMI_SET_PMKID_LIST_CMDID,
+ WMI_GET_PMKID_LIST_CMDID,
+
+ /*
+ * Developer commands starts at 0xF000
+ */
+ WMI_SET_BITRATE_CMDID = 0xF000,
+ WMI_GET_BITRATE_CMDID,
+ WMI_SET_WHALPARAM_CMDID,
+
+} WMI_COMMAND_ID;
+
+/*
+ * Frame Types
+ */
+typedef enum {
+ WMI_FRAME_BEACON = 0,
+ WMI_FRAME_PROBE_REQ,
+ WMI_FRAME_PROBE_RESP,
+ WMI_FRAME_ASSOC_REQ,
+ WMI_FRAME_ASSOC_RESP,
+ WMI_NUM_MGMT_FRAME
+} WMI_MGMT_FRAME_TYPE;
+
+/*
+ * Connect Command
+ */
+typedef enum {
+ INFRA_NETWORK = 0x01,
+ ADHOC_NETWORK = 0x02,
+ ADHOC_CREATOR = 0x04,
+} NETWORK_TYPE;
+
+typedef enum {
+ OPEN_AUTH = 0x01,
+ SHARED_AUTH = 0x02,
+ LEAP_AUTH = 0x04, /* different from IEEE_AUTH_MODE definitions */
+} DOT11_AUTH_MODE;
+
+typedef enum {
+ NONE_AUTH = 0x01,
+ WPA_AUTH = 0x02,
+ WPA_PSK_AUTH = 0x03,
+ WPA2_AUTH = 0x04,
+ WPA2_PSK_AUTH = 0x05,
+ WPA_AUTH_CCKM = 0x06,
+ WPA2_AUTH_CCKM = 0x07,
+} AUTH_MODE;
+
+typedef enum {
+ NONE_CRYPT = 0x01,
+ WEP_CRYPT = 0x02,
+ TKIP_CRYPT = 0x03,
+ AES_CRYPT = 0x04,
+} CRYPTO_TYPE;
+
+#define WMI_MIN_CRYPTO_TYPE NONE_CRYPT
+#define WMI_MAX_CRYPTO_TYPE (AES_CRYPT + 1)
+
+#define WMI_MIN_KEY_INDEX 0
+#define WMI_MAX_KEY_INDEX 3
+
+#define WMI_MAX_KEY_LEN 32
+
+#define WMI_MAX_SSID_LEN 32
+
+typedef enum {
+ CONNECT_ASSOC_POLICY_USER = 0x0001,
+ CONNECT_SEND_REASSOC = 0x0002,
+ CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+ CONNECT_PROFILE_MATCH_DONE = 0x0008,
+ CONNECT_IGNORE_AAC_BEACON = 0x0010,
+ CONNECT_CSA_FOLLOW_BSS = 0x0020,
+} WMI_CONNECT_CTRL_FLAGS_BITS;
+
+#define DEFAULT_CONNECT_CTRL_FLAGS (CONNECT_CSA_FOLLOW_BSS)
+
+typedef PREPACK struct {
+ A_UINT8 networkType;
+ A_UINT8 dot11AuthMode;
+ A_UINT8 authMode;
+ A_UINT8 pairwiseCryptoType;
+ A_UINT8 pairwiseCryptoLen;
+ A_UINT8 groupCryptoType;
+ A_UINT8 groupCryptoLen;
+ A_UINT8 ssidLength;
+ A_UCHAR ssid[WMI_MAX_SSID_LEN];
+ A_UINT16 channel;
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT32 ctrl_flags;
+} POSTPACK WMI_CONNECT_CMD;
+
+/*
+ * WMI_RECONNECT_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT16 channel; /* hint */
+ A_UINT8 bssid[ATH_MAC_LEN]; /* mandatory if set */
+} POSTPACK WMI_RECONNECT_CMD;
+
+/*
+ * WMI_ADD_CIPHER_KEY_CMDID
+ */
+typedef enum {
+ PAIRWISE_USAGE = 0x00,
+ GROUP_USAGE = 0x01,
+ TX_USAGE = 0x02, /* default Tx Key - Static WEP only */
+} KEY_USAGE;
+
+/*
+ * Bit Flag
+ * Bit 0 - Initialise TSC - default is Initialize
+ */
+#define KEY_OP_INIT_TSC 0x01
+#define KEY_OP_INIT_RSC 0x02
+
+#define KEY_OP_INIT_VAL 0x03 /* Default Initialise the TSC & RSC */
+#define KEY_OP_VALID_MASK 0x03
+
+typedef PREPACK struct {
+ A_UINT8 keyIndex;
+ A_UINT8 keyType;
+ A_UINT8 keyUsage; /* KEY_USAGE */
+ A_UINT8 keyLength;
+ A_UINT8 keyRSC[8]; /* key replay sequence counter */
+ A_UINT8 key[WMI_MAX_KEY_LEN];
+ A_UINT8 key_op_ctrl; /* Additional Key Control information */
+} POSTPACK WMI_ADD_CIPHER_KEY_CMD;
+
+/*
+ * WMI_DELETE_CIPHER_KEY_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT8 keyIndex;
+} POSTPACK WMI_DELETE_CIPHER_KEY_CMD;
+
+#define WMI_KRK_LEN 16
+/*
+ * WMI_ADD_KRK_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT8 krk[WMI_KRK_LEN];
+} POSTPACK WMI_ADD_KRK_CMD;
+
+/*
+ * WMI_SET_TKIP_COUNTERMEASURES_CMDID
+ */
+typedef enum {
+ WMI_TKIP_CM_DISABLE = 0x0,
+ WMI_TKIP_CM_ENABLE = 0x1,
+} WMI_TKIP_CM_CONTROL;
+
+typedef PREPACK struct {
+ A_UINT8 cm_en; /* WMI_TKIP_CM_CONTROL */
+} POSTPACK WMI_SET_TKIP_COUNTERMEASURES_CMD;
+
+/*
+ * WMI_SET_PMKID_CMDID
+ */
+
+#define WMI_PMKID_LEN 16
+
+typedef enum {
+ PMKID_DISABLE = 0,
+ PMKID_ENABLE = 1,
+} PMKID_ENABLE_FLG;
+
+typedef PREPACK struct {
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT8 enable; /* PMKID_ENABLE_FLG */
+ A_UINT8 pmkid[WMI_PMKID_LEN];
+} POSTPACK WMI_SET_PMKID_CMD;
+
+/*
+ * WMI_START_SCAN_CMD
+ */
+typedef enum {
+ WMI_LONG_SCAN = 0,
+ WMI_SHORT_SCAN = 1,
+} WMI_SCAN_TYPE;
+
+typedef PREPACK struct {
+ A_BOOL forceFgScan;
+ A_BOOL isLegacy; /* For Legacy Cisco AP compatibility */
+ A_UINT32 homeDwellTime; /* Maximum duration in the home channel(milliseconds) */
+ A_UINT32 forceScanInterval; /* Time interval between scans (milliseconds)*/
+ A_UINT8 scanType; /* WMI_SCAN_TYPE */
+} POSTPACK WMI_START_SCAN_CMD;
+
+/*
+ * WMI_SET_SCAN_PARAMS_CMDID
+ */
+#define WMI_SHORTSCANRATIO_DEFAULT 3
+typedef enum {
+ CONNECT_SCAN_CTRL_FLAGS = 0x01, /* set if can scan in the Connect cmd */
+ SCAN_CONNECTED_CTRL_FLAGS = 0x02, /* set if scan for the SSID it is */
+ /* already connected to */
+ ACTIVE_SCAN_CTRL_FLAGS = 0x04, /* set if enable active scan */
+ ROAM_SCAN_CTRL_FLAGS = 0x08, /* set if enable roam scan when bmiss and lowrssi */
+ REPORT_BSSINFO_CTRL_FLAGS = 0x10, /* set if follows customer BSSINFO reporting rule */
+ ENABLE_AUTO_CTRL_FLAGS = 0x20, /* if disabled, target doesn't
+ scan after a disconnect event */
+ ENABLE_SCAN_ABORT_EVENT = 0x40 /* Scan complete event with canceled status will be generated when a scan is prempted before it gets completed */
+
+} WMI_SCAN_CTRL_FLAGS_BITS;
+
+#define CAN_SCAN_IN_CONNECT(flags) (flags & CONNECT_SCAN_CTRL_FLAGS)
+#define CAN_SCAN_CONNECTED(flags) (flags & SCAN_CONNECTED_CTRL_FLAGS)
+#define ENABLE_ACTIVE_SCAN(flags) (flags & ACTIVE_SCAN_CTRL_FLAGS)
+#define ENABLE_ROAM_SCAN(flags) (flags & ROAM_SCAN_CTRL_FLAGS)
+#define CONFIG_REPORT_BSSINFO(flags) (flags & REPORT_BSSINFO_CTRL_FLAGS)
+#define IS_AUTO_SCAN_ENABLED(flags) (flags & ENABLE_AUTO_CTRL_FLAGS)
+#define SCAN_ABORT_EVENT_ENABLED(flags) (flags & ENABLE_SCAN_ABORT_EVENT)
+
+#define DEFAULT_SCAN_CTRL_FLAGS (CONNECT_SCAN_CTRL_FLAGS| SCAN_CONNECTED_CTRL_FLAGS| ACTIVE_SCAN_CTRL_FLAGS| ROAM_SCAN_CTRL_FLAGS | ENABLE_AUTO_CTRL_FLAGS)
+
+
+typedef PREPACK struct {
+ A_UINT16 fg_start_period; /* seconds */
+ A_UINT16 fg_end_period; /* seconds */
+ A_UINT16 bg_period; /* seconds */
+ A_UINT16 maxact_chdwell_time; /* msec */
+ A_UINT16 pas_chdwell_time; /* msec */
+ A_UINT8 shortScanRatio; /* how many shorts scan for one long */
+ A_UINT8 scanCtrlFlags;
+ A_UINT16 minact_chdwell_time; /* msec */
+ A_UINT32 max_dfsch_act_time; /* msecs */
+} POSTPACK WMI_SCAN_PARAMS_CMD;
+
+/*
+ * WMI_SET_BSS_FILTER_CMDID
+ */
+typedef enum {
+ NONE_BSS_FILTER = 0x0, /* no beacons forwarded */
+ ALL_BSS_FILTER, /* all beacons forwarded */
+ PROFILE_FILTER, /* only beacons matching profile */
+ ALL_BUT_PROFILE_FILTER, /* all but beacons matching profile */
+ CURRENT_BSS_FILTER, /* only beacons matching current BSS */
+ ALL_BUT_BSS_FILTER, /* all but beacons matching BSS */
+ PROBED_SSID_FILTER, /* beacons matching probed ssid */
+ LAST_BSS_FILTER, /* marker only */
+} WMI_BSS_FILTER;
+
+typedef PREPACK struct {
+ A_UINT8 bssFilter; /* see WMI_BSS_FILTER */
+ A_UINT32 ieMask;
+} POSTPACK WMI_BSS_FILTER_CMD;
+
+/*
+ * WMI_SET_PROBED_SSID_CMDID
+ */
+#define MAX_PROBED_SSID_INDEX 5
+
+typedef enum {
+ DISABLE_SSID_FLAG = 0, /* disables entry */
+ SPECIFIC_SSID_FLAG = 0x01, /* probes specified ssid */
+ ANY_SSID_FLAG = 0x02, /* probes for any ssid */
+} WMI_SSID_FLAG;
+
+typedef PREPACK struct {
+ A_UINT8 entryIndex; /* 0 to MAX_PROBED_SSID_INDEX */
+ A_UINT8 flag; /* WMI_SSID_FLG */
+ A_UINT8 ssidLength;
+ A_UINT8 ssid[32];
+} POSTPACK WMI_PROBED_SSID_CMD;
+
+/*
+ * WMI_SET_LISTEN_INT_CMDID
+ * The Listen interval is between 15 and 3000 TUs
+ */
+#define MIN_LISTEN_INTERVAL 15
+#define MAX_LISTEN_INTERVAL 5000
+#define MIN_LISTEN_BEACONS 1
+#define MAX_LISTEN_BEACONS 50
+
+typedef PREPACK struct {
+ A_UINT16 listenInterval;
+ A_UINT16 numBeacons;
+} POSTPACK WMI_LISTEN_INT_CMD;
+
+/*
+ * WMI_SET_BEACON_INT_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT16 beaconInterval;
+} POSTPACK WMI_BEACON_INT_CMD;
+
+/*
+ * WMI_SET_BMISS_TIME_CMDID
+ * valid values are between 1000 and 5000 TUs
+ */
+
+#define MIN_BMISS_TIME 1000
+#define MAX_BMISS_TIME 5000
+#define MIN_BMISS_BEACONS 1
+#define MAX_BMISS_BEACONS 50
+
+typedef PREPACK struct {
+ A_UINT16 bmissTime;
+ A_UINT16 numBeacons;
+} POSTPACK WMI_BMISS_TIME_CMD;
+
+/*
+ * WMI_SET_POWER_MODE_CMDID
+ */
+typedef enum {
+ REC_POWER = 0x01,
+ MAX_PERF_POWER,
+} WMI_POWER_MODE;
+
+typedef PREPACK struct {
+ A_UINT8 powerMode; /* WMI_POWER_MODE */
+} POSTPACK WMI_POWER_MODE_CMD;
+
+/*
+ * WMI_SET_POWER_PARAMS_CMDID
+ */
+typedef enum {
+ IGNORE_DTIM = 0x01,
+ NORMAL_DTIM = 0x02,
+ STICK_DTIM = 0x03,
+} WMI_DTIM_POLICY;
+
+typedef PREPACK struct {
+ A_UINT16 idle_period; /* msec */
+ A_UINT16 pspoll_number;
+ A_UINT16 dtim_policy;
+} POSTPACK WMI_POWER_PARAMS_CMD;
+
+typedef PREPACK struct {
+ A_UINT8 power_saving;
+ A_UINT8 ttl; /* number of beacon periods */
+ A_UINT16 atim_windows; /* msec */
+ A_UINT16 timeout_value; /* msec */
+} POSTPACK WMI_IBSS_PM_CAPS_CMD;
+
+/*
+ * WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID
+ */
+typedef enum {
+ IGNORE_TIM_ALL_QUEUES_APSD = 0,
+ PROCESS_TIM_ALL_QUEUES_APSD = 1,
+ IGNORE_TIM_SIMULATED_APSD = 2,
+ PROCESS_TIM_SIMULATED_APSD = 3,
+} APSD_TIM_POLICY;
+
+typedef PREPACK struct {
+ A_UINT16 psPollTimeout; /* msec */
+ A_UINT16 triggerTimeout; /* msec */
+ A_UINT32 apsdTimPolicy; /* TIM behavior with ques APSD enabled. Default is IGNORE_TIM_ALL_QUEUES_APSD */
+ A_UINT32 simulatedAPSDTimPolicy; /* TIM behavior with simulated APSD enabled. Default is PROCESS_TIM_SIMULATED_APSD */
+} POSTPACK WMI_POWERSAVE_TIMERS_POLICY_CMD;
+
+/*
+ * WMI_SET_VOICE_PKT_SIZE_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT16 voicePktSize;
+} POSTPACK WMI_SET_VOICE_PKT_SIZE_CMD;
+
+/*
+ * WMI_SET_MAX_SP_LEN_CMDID
+ */
+typedef enum {
+ DELIVER_ALL_PKT = 0x0,
+ DELIVER_2_PKT = 0x1,
+ DELIVER_4_PKT = 0x2,
+ DELIVER_6_PKT = 0x3,
+} APSD_SP_LEN_TYPE;
+
+typedef PREPACK struct {
+ A_UINT8 maxSPLen;
+} POSTPACK WMI_SET_MAX_SP_LEN_CMD;
+
+/*
+ * WMI_SET_DISC_TIMEOUT_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT8 disconnectTimeout; /* seconds */
+} POSTPACK WMI_DISC_TIMEOUT_CMD;
+
+typedef enum {
+ UPLINK_TRAFFIC = 0,
+ DNLINK_TRAFFIC = 1,
+ BIDIR_TRAFFIC = 2,
+} DIR_TYPE;
+
+typedef enum {
+ DISABLE_FOR_THIS_AC = 0,
+ ENABLE_FOR_THIS_AC = 1,
+ ENABLE_FOR_ALL_AC = 2,
+} VOICEPS_CAP_TYPE;
+
+typedef enum {
+ TRAFFIC_TYPE_APERIODIC = 0,
+ TRAFFIC_TYPE_PERIODIC = 1,
+}TRAFFIC_TYPE;
+
+/*
+ * WMI_CREATE_PSTREAM_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT32 minServiceInt; /* in milli-sec */
+ A_UINT32 maxServiceInt; /* in milli-sec */
+ A_UINT32 inactivityInt; /* in milli-sec */
+ A_UINT32 suspensionInt; /* in milli-sec */
+ A_UINT32 serviceStartTime;
+ A_UINT32 minDataRate; /* in bps */
+ A_UINT32 meanDataRate; /* in bps */
+ A_UINT32 peakDataRate; /* in bps */
+ A_UINT32 maxBurstSize;
+ A_UINT32 delayBound;
+ A_UINT32 minPhyRate; /* in bps */
+ A_UINT32 sba;
+ A_UINT32 mediumTime;
+ A_UINT16 nominalMSDU; /* in octects */
+ A_UINT16 maxMSDU; /* in octects */
+ A_UINT8 trafficClass;
+ A_UINT8 trafficType; /* TRAFFIC_TYPE */
+ A_UINT8 trafficDirection; /* TRAFFIC_DIR */
+ A_UINT8 voicePSCapability; /* VOICEPS_CAP_TYPE */
+ A_UINT8 tsid;
+ A_UINT8 userPriority; /* 802.1D user priority */
+} POSTPACK WMI_CREATE_PSTREAM_CMD;
+
+/*
+ * WMI_DELETE_PSTREAM_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT8 trafficClass;
+ A_UINT8 tsid;
+} POSTPACK WMI_DELETE_PSTREAM_CMD;
+
+/*
+ * WMI_SET_CHANNEL_PARAMS_CMDID
+ */
+typedef enum {
+ WMI_11A_MODE = 0x1,
+ WMI_11G_MODE = 0x2,
+ WMI_11AG_MODE = 0x3,
+ WMI_11B_MODE = 0x4,
+ WMI_11GONLY_MODE = 0x5,
+} WMI_PHY_MODE;
+
+#define WMI_MAX_CHANNELS 32
+
+typedef PREPACK struct {
+ A_UINT8 reserved1;
+ A_UINT8 scanParam; /* set if enable scan */
+ A_UINT8 phyMode; /* see WMI_PHY_MODE */
+ A_UINT8 numChannels; /* how many channels follow */
+ A_UINT16 channelList[1]; /* channels in Mhz */
+} POSTPACK WMI_CHANNEL_PARAMS_CMD;
+
+
+/*
+ * WMI_RSSI_THRESHOLD_PARAMS_CMDID
+ * Setting the polltime to 0 would disable polling.
+ * Threshold values are in the ascending order, and should agree to:
+ * (lowThreshold_lowerVal < lowThreshold_upperVal < highThreshold_lowerVal
+ * < highThreshold_upperVal)
+ */
+
+typedef PREPACK struct WMI_RSSI_THRESHOLD_PARAMS{
+ A_UINT32 pollTime; /* Polling time as a factor of LI */
+ A_INT16 thresholdAbove1_Val; /* lowest of upper */
+ A_INT16 thresholdAbove2_Val;
+ A_INT16 thresholdAbove3_Val;
+ A_INT16 thresholdAbove4_Val;
+ A_INT16 thresholdAbove5_Val;
+ A_INT16 thresholdAbove6_Val; /* highest of upper */
+ A_INT16 thresholdBelow1_Val; /* lowest of bellow */
+ A_INT16 thresholdBelow2_Val;
+ A_INT16 thresholdBelow3_Val;
+ A_INT16 thresholdBelow4_Val;
+ A_INT16 thresholdBelow5_Val;
+ A_INT16 thresholdBelow6_Val; /* highest of bellow */
+ A_UINT8 weight; /* "alpha" */
+ A_UINT8 reserved[3];
+} POSTPACK WMI_RSSI_THRESHOLD_PARAMS_CMD;
+
+/*
+ * WMI_SNR_THRESHOLD_PARAMS_CMDID
+ * Setting the polltime to 0 would disable polling.
+ */
+
+typedef PREPACK struct WMI_SNR_THRESHOLD_PARAMS{
+ A_UINT32 pollTime; /* Polling time as a factor of LI */
+ A_UINT8 weight; /* "alpha" */
+ A_UINT8 thresholdAbove1_Val; /* lowest of uppper*/
+ A_UINT8 thresholdAbove2_Val;
+ A_UINT8 thresholdAbove3_Val;
+ A_UINT8 thresholdAbove4_Val; /* highest of upper */
+ A_UINT8 thresholdBelow1_Val; /* lowest of bellow */
+ A_UINT8 thresholdBelow2_Val;
+ A_UINT8 thresholdBelow3_Val;
+ A_UINT8 thresholdBelow4_Val; /* highest of bellow */
+ A_UINT8 reserved[3];
+} POSTPACK WMI_SNR_THRESHOLD_PARAMS_CMD;
+
+/*
+ * WMI_LQ_THRESHOLD_PARAMS_CMDID
+ */
+typedef PREPACK struct WMI_LQ_THRESHOLD_PARAMS {
+ A_UINT8 enable;
+ A_UINT8 thresholdAbove1_Val;
+ A_UINT8 thresholdAbove2_Val;
+ A_UINT8 thresholdAbove3_Val;
+ A_UINT8 thresholdAbove4_Val;
+ A_UINT8 thresholdBelow1_Val;
+ A_UINT8 thresholdBelow2_Val;
+ A_UINT8 thresholdBelow3_Val;
+ A_UINT8 thresholdBelow4_Val;
+ A_UINT8 reserved[3];
+} POSTPACK WMI_LQ_THRESHOLD_PARAMS_CMD;
+
+typedef enum {
+ WMI_LPREAMBLE_DISABLED = 0,
+ WMI_LPREAMBLE_ENABLED
+} WMI_LPREAMBLE_STATUS;
+
+typedef PREPACK struct {
+ A_UINT8 status;
+}POSTPACK WMI_SET_LPREAMBLE_CMD;
+
+typedef PREPACK struct {
+ A_UINT16 threshold;
+}POSTPACK WMI_SET_RTS_CMD;
+
+/*
+ * WMI_TARGET_ERROR_REPORT_BITMASK_CMDID
+ * Sets the error reporting event bitmask in target. Target clears it
+ * upon an error. Subsequent errors are counted, but not reported
+ * via event, unless the bitmask is set again.
+ */
+typedef PREPACK struct {
+ A_UINT32 bitmask;
+} POSTPACK WMI_TARGET_ERROR_REPORT_BITMASK;
+
+/*
+ * WMI_SET_TX_PWR_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT8 dbM; /* in dbM units */
+} POSTPACK WMI_SET_TX_PWR_CMD, WMI_TX_PWR_REPLY;
+
+/*
+ * WMI_SET_ASSOC_INFO_CMDID
+ *
+ * A maximum of 2 private IEs can be sent in the [Re]Assoc request.
+ * A 3rd one, the CCX version IE can also be set from the host.
+ */
+#define WMI_MAX_ASSOC_INFO_TYPE 2
+#define WMI_CCX_VER_IE 2 /* ieType to set CCX Version IE */
+
+#define WMI_MAX_ASSOC_INFO_LEN 240
+
+typedef PREPACK struct {
+ A_UINT8 ieType;
+ A_UINT8 bufferSize;
+ A_UINT8 assocInfo[1]; /* up to WMI_MAX_ASSOC_INFO_LEN */
+} POSTPACK WMI_SET_ASSOC_INFO_CMD;
+
+
+/*
+ * WMI_GET_TX_PWR_CMDID does not take any parameters
+ */
+
+/*
+ * WMI_ADD_BAD_AP_CMDID
+ */
+#define WMI_MAX_BAD_AP_INDEX 1
+
+typedef PREPACK struct {
+ A_UINT8 badApIndex; /* 0 to WMI_MAX_BAD_AP_INDEX */
+ A_UINT8 bssid[ATH_MAC_LEN];
+} POSTPACK WMI_ADD_BAD_AP_CMD;
+
+/*
+ * WMI_DELETE_BAD_AP_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT8 badApIndex; /* 0 to WMI_MAX_BAD_AP_INDEX */
+} POSTPACK WMI_DELETE_BAD_AP_CMD;
+
+/*
+ * WMI_SET_ACCESS_PARAMS_CMDID
+ */
+#define WMI_DEFAULT_TXOP_ACPARAM 0 /* implies one MSDU */
+#define WMI_DEFAULT_ECWMIN_ACPARAM 4 /* corresponds to CWmin of 15 */
+#define WMI_DEFAULT_ECWMAX_ACPARAM 10 /* corresponds to CWmax of 1023 */
+#define WMI_MAX_CW_ACPARAM 15 /* maximum eCWmin or eCWmax */
+#define WMI_DEFAULT_AIFSN_ACPARAM 2
+#define WMI_MAX_AIFSN_ACPARAM 15
+typedef PREPACK struct {
+ A_UINT16 txop; /* in units of 32 usec */
+ A_UINT8 eCWmin;
+ A_UINT8 eCWmax;
+ A_UINT8 aifsn;
+} POSTPACK WMI_SET_ACCESS_PARAMS_CMD;
+
+
+/*
+ * WMI_SET_RETRY_LIMITS_CMDID
+ *
+ * This command is used to customize the number of retries the
+ * wlan device will perform on a given frame.
+ */
+#define WMI_MIN_RETRIES 2
+#define WMI_MAX_RETRIES 13
+typedef enum {
+ MGMT_FRAMETYPE = 0,
+ CONTROL_FRAMETYPE = 1,
+ DATA_FRAMETYPE = 2
+} WMI_FRAMETYPE;
+
+typedef PREPACK struct {
+ A_UINT8 frameType; /* WMI_FRAMETYPE */
+ A_UINT8 trafficClass; /* applies only to DATA_FRAMETYPE */
+ A_UINT8 maxRetries;
+ A_UINT8 enableNotify;
+} POSTPACK WMI_SET_RETRY_LIMITS_CMD;
+
+/*
+ * WMI_SET_ROAM_CTRL_CMDID
+ *
+ * This command is used to influence the Roaming behaviour
+ * Set the host biases of the BSSs before setting the roam mode as bias
+ * based.
+ */
+
+/*
+ * Different types of Roam Control
+ */
+
+typedef enum {
+ WMI_FORCE_ROAM = 1, /* Roam to the specified BSSID */
+ WMI_SET_ROAM_MODE = 2, /* default ,progd bias, no roam */
+ WMI_SET_HOST_BIAS = 3, /* Set the Host Bias */
+ WMI_SET_LOWRSSI_SCAN_PARAMS = 4, /* Set lowrssi Scan parameters */
+} WMI_ROAM_CTRL_TYPE;
+
+#define WMI_MIN_ROAM_CTRL_TYPE WMI_FORCE_ROAM
+#define WMI_MAX_ROAM_CTRL_TYPE WMI_SET_LOWRSSI_SCAN_PARAMS
+
+/*
+ * ROAM MODES
+ */
+
+typedef enum {
+ WMI_DEFAULT_ROAM_MODE = 1, /* RSSI based ROAM */
+ WMI_HOST_BIAS_ROAM_MODE = 2, /* HOST BIAS based ROAM */
+ WMI_LOCK_BSS_MODE = 3 /* Lock to the Current BSS - no Roam */
+} WMI_ROAM_MODE;
+
+/*
+ * BSS HOST BIAS INFO
+ */
+
+typedef PREPACK struct {
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_INT8 bias;
+} POSTPACK WMI_BSS_BIAS;
+
+typedef PREPACK struct {
+ A_UINT8 numBss;
+ WMI_BSS_BIAS bssBias[1];
+} POSTPACK WMI_BSS_BIAS_INFO;
+
+typedef PREPACK struct WMI_LOWRSSI_SCAN_PARAMS {
+ A_UINT16 lowrssi_scan_period;
+ A_INT16 lowrssi_scan_threshold;
+ A_INT16 lowrssi_roam_threshold;
+ A_UINT8 roam_rssi_floor;
+ A_UINT8 reserved[1]; /* For alignment */
+} POSTPACK WMI_LOWRSSI_SCAN_PARAMS;
+
+typedef PREPACK struct {
+ PREPACK union {
+ A_UINT8 bssid[ATH_MAC_LEN]; /* WMI_FORCE_ROAM */
+ A_UINT8 roamMode; /* WMI_SET_ROAM_MODE */
+ WMI_BSS_BIAS_INFO bssBiasInfo; /* WMI_SET_HOST_BIAS */
+ WMI_LOWRSSI_SCAN_PARAMS lrScanParams;
+ } POSTPACK info;
+ A_UINT8 roamCtrlType ;
+} POSTPACK WMI_SET_ROAM_CTRL_CMD;
+
+/*
+ * WMI_ENABLE_RM_CMDID
+ */
+typedef PREPACK struct {
+ A_BOOL enable_radio_measurements;
+} POSTPACK WMI_ENABLE_RM_CMD;
+
+/*
+ * WMI_SET_MAX_OFFHOME_DURATION_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT8 max_offhome_duration;
+} POSTPACK WMI_SET_MAX_OFFHOME_DURATION_CMD;
+
+typedef PREPACK struct {
+ A_UINT32 frequency;
+ A_UINT8 threshold;
+} POSTPACK WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD;
+
+typedef enum {
+ BT_STREAM_UNDEF = 0,
+ BT_STREAM_SCO, /* SCO stream */
+ BT_STREAM_A2DP, /* A2DP stream */
+ BT_STREAM_MAX
+} BT_STREAM_TYPE;
+
+typedef enum {
+ BT_PARAM_SCO = 1, /* SCO stream parameters */
+ BT_PARAM_A2DP, /* A2DP stream parameters */
+ BT_PARAM_MISC, /* miscellaneous parameters */
+ BT_PARAM_REGS, /* co-existence register parameters */
+ BT_PARAM_MAX
+} BT_PARAM_TYPE;
+
+typedef enum {
+ BT_STATUS_UNDEF = 0,
+ BT_STATUS_START,
+ BT_STATUS_STOP,
+ BT_STATUS_RESUME,
+ BT_STATUS_SUSPEND,
+ BT_STATUS_MAX
+} BT_STREAM_STATUS;
+
+typedef PREPACK struct {
+ A_UINT8 streamType;
+ A_UINT8 status;
+} POSTPACK WMI_SET_BT_STATUS_CMD;
+
+typedef PREPACK struct {
+ A_UINT8 noSCOPkts;
+ A_UINT8 pspollTimeout;
+ A_UINT8 stompbt;
+} POSTPACK BT_PARAMS_SCO;
+
+typedef PREPACK struct {
+ A_UINT32 period;
+ A_UINT32 dutycycle;
+ A_UINT8 stompbt;
+} POSTPACK BT_PARAMS_A2DP;
+
+typedef PREPACK struct {
+ A_UINT32 mode;
+ A_UINT32 scoWghts;
+ A_UINT32 a2dpWghts;
+ A_UINT32 genWghts;
+ A_UINT32 mode2;
+ A_UINT8 setVal;
+} POSTPACK BT_COEX_REGS;
+
+typedef enum {
+ WLAN_PROTECT_POLICY = 1,
+ WLAN_COEX_CTRL_FLAGS
+} BT_PARAMS_MISC_TYPE;
+
+typedef enum {
+ WLAN_PROTECT_PER_STREAM = 0x01, /* default */
+ WLAN_PROTECT_ANY_TX = 0x02
+} WLAN_PROTECT_FLAGS;
+
+
+#define WLAN_DISABLE_COEX_IN_DISCONNECT 0x01 /* default */
+#define WLAN_KEEP_COEX_IN_DISCONNECT 0x02
+#define WLAN_STOMPBT_IN_DISCONNECT 0x04
+
+#define WLAN_DISABLE_COEX_IN_ROAM 0x10 /* default */
+#define WLAN_KEEP_COEX_IN_ROAM 0x20
+#define WLAN_STOMPBT_IN_ROAM 0x40
+
+#define WLAN_DISABLE_COEX_IN_SCAN 0x100 /* default */
+#define WLAN_KEEP_COEX_IN_SCAN 0x200
+#define WLAN_STOMPBT_IN_SCAN 0x400
+
+#define WLAN_DISABLE_COEX_BT_OFF 0x1000 /* default */
+#define WLAN_KEEP_COEX_BT_OFF 0x2000
+#define WLAN_STOMPBT_BT_OFF 0x4000
+
+typedef PREPACK struct {
+ A_UINT32 period;
+ A_UINT32 dutycycle;
+ A_UINT8 stompbt;
+ A_UINT8 policy;
+} POSTPACK WLAN_PROTECT_POLICY_TYPE;
+
+typedef PREPACK struct {
+ PREPACK union {
+ WLAN_PROTECT_POLICY_TYPE protectParams;
+ A_UINT16 wlanCtrlFlags;
+ } POSTPACK info;
+ A_UINT8 paramType;
+} POSTPACK BT_PARAMS_MISC;
+
+typedef PREPACK struct {
+ PREPACK union {
+ BT_PARAMS_SCO scoParams;
+ BT_PARAMS_A2DP a2dpParams;
+ BT_PARAMS_MISC miscParams;
+ BT_COEX_REGS regs;
+ } POSTPACK info;
+ A_UINT8 paramType;
+} POSTPACK WMI_SET_BT_PARAMS_CMD;
+
+/*
+ * Command Replies
+ */
+
+/*
+ * WMI_GET_CHANNEL_LIST_CMDID reply
+ */
+typedef PREPACK struct {
+ A_UINT8 reserved1;
+ A_UINT8 numChannels; /* number of channels in reply */
+ A_UINT16 channelList[1]; /* channel in Mhz */
+} POSTPACK WMI_CHANNEL_LIST_REPLY;
+
+typedef enum {
+ A_SUCCEEDED = A_OK,
+ A_FAILED_DELETE_STREAM_DOESNOT_EXIST=250,
+ A_SUCCEEDED_MODIFY_STREAM=251,
+ A_FAILED_INVALID_STREAM = 252,
+ A_FAILED_MAX_THINSTREAMS = 253,
+ A_FAILED_CREATE_REMOVE_PSTREAM_FIRST = 254,
+} PSTREAM_REPLY_STATUS;
+
+/*
+ * List of Events (target to host)
+ */
+typedef enum {
+ WMI_READY_EVENTID = 0x1001,
+ WMI_CONNECT_EVENTID,
+ WMI_DISCONNECT_EVENTID,
+ WMI_BSSINFO_EVENTID,
+ WMI_CMDERROR_EVENTID,
+ WMI_REGDOMAIN_EVENTID,
+ WMI_PSTREAM_TIMEOUT_EVENTID,
+ WMI_NEIGHBOR_REPORT_EVENTID,
+ WMI_TKIP_MICERR_EVENTID,
+ WMI_SCAN_COMPLETE_EVENTID,
+ WMI_REPORT_STATISTICS_EVENTID,
+ WMI_RSSI_THRESHOLD_EVENTID,
+ WMI_ERROR_REPORT_EVENTID,
+ WMI_OPT_RX_FRAME_EVENTID,
+ WMI_REPORT_ROAM_TBL_EVENTID,
+ WMI_EXTENSION_EVENTID,
+ WMI_CAC_EVENTID,
+ WMI_SNR_THRESHOLD_EVENTID,
+ WMI_LQ_THRESHOLD_EVENTID,
+ WMI_TX_RETRY_ERR_EVENTID,
+ WMI_REPORT_ROAM_DATA_EVENTID,
+ WMI_TEST_EVENTID,
+ WMI_APLIST_EVENTID,
+ WMI_GET_WOW_LIST_EVENTID,
+ WMI_GET_PMKID_LIST_EVENTID
+} WMI_EVENT_ID;
+
+typedef enum {
+ WMI_11A_CAPABILITY = 1,
+ WMI_11G_CAPABILITY = 2,
+ WMI_11AG_CAPABILITY = 3,
+} WMI_PHY_CAPABILITY;
+
+typedef PREPACK struct {
+ A_UINT8 macaddr[ATH_MAC_LEN];
+ A_UINT8 phyCapability; /* WMI_PHY_CAPABILITY */
+} POSTPACK WMI_READY_EVENT;
+
+/*
+ * Connect Event
+ */
+typedef PREPACK struct {
+ A_UINT16 channel;
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT16 listenInterval;
+ A_UINT16 beaconInterval;
+ A_UINT32 networkType;
+ A_UINT8 beaconIeLen;
+ A_UINT8 assocReqLen;
+ A_UINT8 assocRespLen;
+ A_UINT8 assocInfo[1];
+} POSTPACK WMI_CONNECT_EVENT;
+
+/*
+ * Disconnect Event
+ */
+typedef enum {
+ NO_NETWORK_AVAIL = 0x01,
+ LOST_LINK = 0x02, /* bmiss */
+ DISCONNECT_CMD = 0x03,
+ BSS_DISCONNECTED = 0x04,
+ AUTH_FAILED = 0x05,
+ ASSOC_FAILED = 0x06,
+ NO_RESOURCES_AVAIL = 0x07,
+ CSERV_DISCONNECT = 0x08,
+ INVALID_PROFILE = 0x0a,
+ DOT11H_CHANNEL_SWITCH = 0x0b,
+} WMI_DISCONNECT_REASON;
+
+typedef PREPACK struct {
+ A_UINT16 protocolReasonStatus; /* reason code, see 802.11 spec. */
+ A_UINT8 bssid[ATH_MAC_LEN]; /* set if known */
+ A_UINT8 disconnectReason ; /* see WMI_DISCONNECT_REASON */
+ A_UINT8 assocRespLen;
+ A_UINT8 assocInfo[1];
+} POSTPACK WMI_DISCONNECT_EVENT;
+
+/*
+ * BSS Info Event.
+ * Mechanism used to inform host of the presence and characteristic of
+ * wireless networks present. Consists of bss info header followed by
+ * the beacon or probe-response frame body. The 802.11 header is not included.
+ */
+typedef enum {
+ BEACON_FTYPE = 0x1,
+ PROBERESP_FTYPE,
+ ACTION_MGMT_FTYPE,
+} WMI_BI_FTYPE;
+
+enum {
+ BSS_ELEMID_CHANSWITCH = 0x01,
+ BSS_ELEMID_ATHEROS = 0x02,
+};
+
+typedef PREPACK struct {
+ A_UINT16 channel;
+ A_UINT8 frameType; /* see WMI_BI_FTYPE */
+ A_UINT8 snr;
+ A_INT16 rssi;
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT32 ieMask;
+} POSTPACK WMI_BSS_INFO_HDR;
+
+/*
+ * Command Error Event
+ */
+typedef enum {
+ INVALID_PARAM = 0x01,
+ ILLEGAL_STATE = 0x02,
+ INTERNAL_ERROR = 0x03,
+} WMI_ERROR_CODE;
+
+typedef PREPACK struct {
+ A_UINT16 commandId;
+ A_UINT8 errorCode;
+} POSTPACK WMI_CMD_ERROR_EVENT;
+
+/*
+ * New Regulatory Domain Event
+ */
+typedef PREPACK struct {
+ A_UINT32 regDomain;
+} POSTPACK WMI_REG_DOMAIN_EVENT;
+
+typedef PREPACK struct {
+ A_UINT8 trafficClass;
+} POSTPACK WMI_PSTREAM_TIMEOUT_EVENT;
+
+/*
+ * The WMI_NEIGHBOR_REPORT Event is generated by the target to inform
+ * the host of BSS's it has found that matches the current profile.
+ * It can be used by the host to cache PMKs and/to initiate pre-authentication
+ * if the BSS supports it. The first bssid is always the current associated
+ * BSS.
+ * The bssid and bssFlags information repeats according to the number
+ * or APs reported.
+ */
+typedef enum {
+ WMI_DEFAULT_BSS_FLAGS = 0x00,
+ WMI_PREAUTH_CAPABLE_BSS = 0x01,
+ WMI_PMKID_VALID_BSS = 0x02,
+} WMI_BSS_FLAGS;
+
+typedef PREPACK struct {
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT8 bssFlags; /* see WMI_BSS_FLAGS */
+} POSTPACK WMI_NEIGHBOR_INFO;
+
+typedef PREPACK struct {
+ A_INT8 numberOfAps;
+ WMI_NEIGHBOR_INFO neighbor[1];
+} POSTPACK WMI_NEIGHBOR_REPORT_EVENT;
+
+/*
+ * TKIP MIC Error Event
+ */
+typedef PREPACK struct {
+ A_UINT8 keyid;
+ A_UINT8 ismcast;
+} POSTPACK WMI_TKIP_MICERR_EVENT;
+
+/*
+ * WMI_SCAN_COMPLETE_EVENTID - no parameters (old), staus parameter (new)
+ */
+typedef PREPACK struct {
+ A_STATUS status;
+} POSTPACK WMI_SCAN_COMPLETE_EVENT;
+
+#define MAX_OPT_DATA_LEN 1400
+
+/*
+ * WMI_SET_ADHOC_BSSID_CMDID
+ */
+typedef PREPACK struct {
+ A_UINT8 bssid[ATH_MAC_LEN];
+} POSTPACK WMI_SET_ADHOC_BSSID_CMD;
+
+/*
+ * WMI_SET_OPT_MODE_CMDID
+ */
+typedef enum {
+ SPECIAL_OFF,
+ SPECIAL_ON,
+} OPT_MODE_TYPE;
+
+typedef PREPACK struct {
+ A_UINT8 optMode;
+} POSTPACK WMI_SET_OPT_MODE_CMD;
+
+/*
+ * WMI_TX_OPT_FRAME_CMDID
+ */
+typedef enum {
+ OPT_PROBE_REQ = 0x01,
+ OPT_PROBE_RESP = 0x02,
+ OPT_CPPP_START = 0x03,
+ OPT_CPPP_STOP = 0x04,
+} WMI_OPT_FTYPE;
+
+typedef PREPACK struct {
+ A_UINT16 optIEDataLen;
+ A_UINT8 frmType;
+ A_UINT8 dstAddr[ATH_MAC_LEN];
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT8 reserved; /* For alignment */
+ A_UINT8 optIEData[1];
+} POSTPACK WMI_OPT_TX_FRAME_CMD;
+
+/*
+ * Special frame receive Event.
+ * Mechanism used to inform host of the receiption of the special frames.
+ * Consists of special frame info header followed by special frame body.
+ * The 802.11 header is not included.
+ */
+typedef PREPACK struct {
+ A_UINT16 channel;
+ A_UINT8 frameType; /* see WMI_OPT_FTYPE */
+ A_INT8 snr;
+ A_UINT8 srcAddr[ATH_MAC_LEN];
+ A_UINT8 bssid[ATH_MAC_LEN];
+} POSTPACK WMI_OPT_RX_INFO_HDR;
+
+/*
+ * Reporting statistics.
+ */
+typedef PREPACK struct {
+ A_UINT32 tx_packets;
+ A_UINT32 tx_bytes;
+ A_UINT32 tx_unicast_pkts;
+ A_UINT32 tx_unicast_bytes;
+ A_UINT32 tx_multicast_pkts;
+ A_UINT32 tx_multicast_bytes;
+ A_UINT32 tx_broadcast_pkts;
+ A_UINT32 tx_broadcast_bytes;
+ A_UINT32 tx_rts_success_cnt;
+ A_UINT32 tx_packet_per_ac[4];
+ A_UINT32 tx_errors_per_ac[4];
+
+ A_UINT32 tx_errors;
+ A_UINT32 tx_failed_cnt;
+ A_UINT32 tx_retry_cnt;
+ A_UINT32 tx_rts_fail_cnt;
+ A_INT32 tx_unicast_rate;
+}POSTPACK tx_stats_t;
+
+typedef PREPACK struct {
+ A_UINT32 rx_packets;
+ A_UINT32 rx_bytes;
+ A_UINT32 rx_unicast_pkts;
+ A_UINT32 rx_unicast_bytes;
+ A_UINT32 rx_multicast_pkts;
+ A_UINT32 rx_multicast_bytes;
+ A_UINT32 rx_broadcast_pkts;
+ A_UINT32 rx_broadcast_bytes;
+ A_UINT32 rx_fragment_pkt;
+
+ A_UINT32 rx_errors;
+ A_UINT32 rx_crcerr;
+ A_UINT32 rx_key_cache_miss;
+ A_UINT32 rx_decrypt_err;
+ A_UINT32 rx_duplicate_frames;
+ A_INT32 rx_unicast_rate;
+}POSTPACK rx_stats_t;
+
+typedef PREPACK struct {
+ A_UINT32 tkip_local_mic_failure;
+ A_UINT32 tkip_counter_measures_invoked;
+ A_UINT32 tkip_replays;
+ A_UINT32 tkip_format_errors;
+ A_UINT32 ccmp_format_errors;
+ A_UINT32 ccmp_replays;
+}POSTPACK tkip_ccmp_stats_t;
+
+typedef PREPACK struct {
+ A_UINT32 power_save_failure_cnt;
+}POSTPACK pm_stats_t;
+
+typedef PREPACK struct {
+ A_UINT32 cs_bmiss_cnt;
+ A_UINT32 cs_lowRssi_cnt;
+ A_UINT16 cs_connect_cnt;
+ A_UINT16 cs_disconnect_cnt;
+ A_INT16 cs_aveBeacon_rssi;
+ A_UINT16 cs_roam_count;
+ A_UINT16 cs_rssi;
+ A_UINT8 cs_snr;
+ A_UINT8 cs_aveBeacon_snr;
+ A_UINT8 cs_lastRoam_msec;
+} POSTPACK cserv_stats_t;
+
+typedef PREPACK struct {
+ tx_stats_t tx_stats;
+ rx_stats_t rx_stats;
+ tkip_ccmp_stats_t tkipCcmpStats;
+}POSTPACK wlan_net_stats_t;
+
+typedef PREPACK struct {
+ A_UINT32 wow_num_pkts_dropped;
+ A_UINT16 wow_num_events_discarded;
+ A_UINT8 wow_num_host_pkt_wakeups;
+ A_UINT8 wow_num_host_event_wakeups;
+} POSTPACK wlan_wow_stats_t;
+
+typedef PREPACK struct {
+ A_UINT32 lqVal;
+ A_INT32 noise_floor_calibation;
+ pm_stats_t pmStats;
+ wlan_net_stats_t txrxStats;
+ wlan_wow_stats_t wowStats;
+ cserv_stats_t cservStats;
+} POSTPACK WMI_TARGET_STATS;
+
+/*
+ * WMI_RSSI_THRESHOLD_EVENTID.
+ * Indicate the RSSI events to host. Events are indicated when we breach a
+ * thresold value.
+ */
+typedef enum{
+ WMI_RSSI_THRESHOLD1_ABOVE = 0,
+ WMI_RSSI_THRESHOLD2_ABOVE,
+ WMI_RSSI_THRESHOLD3_ABOVE,
+ WMI_RSSI_THRESHOLD4_ABOVE,
+ WMI_RSSI_THRESHOLD5_ABOVE,
+ WMI_RSSI_THRESHOLD6_ABOVE,
+ WMI_RSSI_THRESHOLD1_BELOW,
+ WMI_RSSI_THRESHOLD2_BELOW,
+ WMI_RSSI_THRESHOLD3_BELOW,
+ WMI_RSSI_THRESHOLD4_BELOW,
+ WMI_RSSI_THRESHOLD5_BELOW,
+ WMI_RSSI_THRESHOLD6_BELOW
+}WMI_RSSI_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+ A_INT16 rssi;
+ A_UINT8 range;
+}POSTPACK WMI_RSSI_THRESHOLD_EVENT;
+
+/*
+ * WMI_ERROR_REPORT_EVENTID
+ */
+typedef enum{
+ WMI_TARGET_PM_ERR_FAIL = 0x00000001,
+ WMI_TARGET_KEY_NOT_FOUND = 0x00000002,
+ WMI_TARGET_DECRYPTION_ERR = 0x00000004,
+ WMI_TARGET_BMISS = 0x00000008,
+ WMI_PSDISABLE_NODE_JOIN = 0x00000010,
+ WMI_TARGET_COM_ERR = 0x00000020,
+ WMI_TARGET_FATAL_ERR = 0x00000040
+} WMI_TARGET_ERROR_VAL;
+
+typedef PREPACK struct {
+ A_UINT32 errorVal;
+}POSTPACK WMI_TARGET_ERROR_REPORT_EVENT;
+
+typedef PREPACK struct {
+ A_UINT8 retrys;
+}POSTPACK WMI_TX_RETRY_ERR_EVENT;
+
+typedef enum{
+ WMI_SNR_THRESHOLD1_ABOVE = 1,
+ WMI_SNR_THRESHOLD1_BELOW,
+ WMI_SNR_THRESHOLD2_ABOVE,
+ WMI_SNR_THRESHOLD2_BELOW,
+ WMI_SNR_THRESHOLD3_ABOVE,
+ WMI_SNR_THRESHOLD3_BELOW,
+ WMI_SNR_THRESHOLD4_ABOVE,
+ WMI_SNR_THRESHOLD4_BELOW
+} WMI_SNR_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+ A_UINT8 range; /* WMI_SNR_THRESHOLD_VAL */
+ A_UINT8 snr;
+}POSTPACK WMI_SNR_THRESHOLD_EVENT;
+
+typedef enum{
+ WMI_LQ_THRESHOLD1_ABOVE = 1,
+ WMI_LQ_THRESHOLD1_BELOW,
+ WMI_LQ_THRESHOLD2_ABOVE,
+ WMI_LQ_THRESHOLD2_BELOW,
+ WMI_LQ_THRESHOLD3_ABOVE,
+ WMI_LQ_THRESHOLD3_BELOW,
+ WMI_LQ_THRESHOLD4_ABOVE,
+ WMI_LQ_THRESHOLD4_BELOW
+} WMI_LQ_THRESHOLD_VAL;
+
+typedef PREPACK struct {
+ A_INT32 lq;
+ A_UINT8 range; /* WMI_LQ_THRESHOLD_VAL */
+}POSTPACK WMI_LQ_THRESHOLD_EVENT;
+/*
+ * WMI_REPORT_ROAM_TBL_EVENTID
+ */
+#define MAX_ROAM_TBL_CAND 5
+
+typedef PREPACK struct {
+ A_INT32 roam_util;
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_INT8 rssi;
+ A_INT8 rssidt;
+ A_INT8 last_rssi;
+ A_INT8 util;
+ A_INT8 bias;
+ A_UINT8 reserved; /* For alignment */
+} POSTPACK WMI_BSS_ROAM_INFO;
+
+
+typedef PREPACK struct {
+ A_UINT16 roamMode;
+ A_UINT16 numEntries;
+ WMI_BSS_ROAM_INFO bssRoamInfo[1];
+} POSTPACK WMI_TARGET_ROAM_TBL;
+
+/*
+ * WMI_CAC_EVENTID
+ */
+typedef enum {
+ CAC_INDICATION_ADMISSION = 0x00,
+ CAC_INDICATION_ADMISSION_RESP = 0x01,
+ CAC_INDICATION_DELETE = 0x02,
+ CAC_INDICATION_NO_RESP = 0x03,
+}CAC_INDICATION;
+
+#define WMM_TSPEC_IE_LEN 63
+
+typedef PREPACK struct {
+ A_UINT8 ac;
+ A_UINT8 cac_indication;
+ A_UINT8 statusCode;
+ A_UINT8 tspecSuggestion[WMM_TSPEC_IE_LEN];
+}POSTPACK WMI_CAC_EVENT;
+
+/*
+ * WMI_APLIST_EVENTID
+ */
+
+typedef enum {
+ APLIST_VER1 = 1,
+} APLIST_VER;
+
+typedef PREPACK struct {
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT16 channel;
+} POSTPACK WMI_AP_INFO_V1;
+
+typedef PREPACK union {
+ WMI_AP_INFO_V1 apInfoV1;
+} POSTPACK WMI_AP_INFO;
+
+typedef PREPACK struct {
+ A_UINT8 apListVer;
+ A_UINT8 numAP;
+ WMI_AP_INFO apList[1];
+} POSTPACK WMI_APLIST_EVENT;
+
+/*
+ * developer commands
+ */
+
+/*
+ * WMI_SET_BITRATE_CMDID
+ *
+ * Get bit rate cmd uses same definition as set bit rate cmd
+ */
+typedef enum {
+ RATE_AUTO = -1,
+ RATE_1Mb = 0,
+ RATE_2Mb = 1,
+ RATE_5_5Mb = 2,
+ RATE_11Mb = 3,
+ RATE_6Mb = 4,
+ RATE_9Mb = 5,
+ RATE_12Mb = 6,
+ RATE_18Mb = 7,
+ RATE_24Mb = 8,
+ RATE_36Mb = 9,
+ RATE_48Mb = 10,
+ RATE_54Mb = 11,
+} WMI_BIT_RATE;
+
+typedef PREPACK struct {
+ A_INT8 rateIndex; /* see WMI_BIT_RATE */
+} POSTPACK WMI_BIT_RATE_CMD, WMI_BIT_RATE_REPLY;
+
+/*
+ * WMI_SET_FIXRATES_CMDID
+ *
+ * Get fix rates cmd uses same definition as set fix rates cmd
+ */
+typedef enum {
+ FIX_RATE_1Mb = 0x1,
+ FIX_RATE_2Mb = 0x2,
+ FIX_RATE_5_5Mb = 0x4,
+ FIX_RATE_11Mb = 0x8,
+ FIX_RATE_6Mb = 0x10,
+ FIX_RATE_9Mb = 0x20,
+ FIX_RATE_12Mb = 0x40,
+ FIX_RATE_18Mb = 0x80,
+ FIX_RATE_24Mb = 0x100,
+ FIX_RATE_36Mb = 0x200,
+ FIX_RATE_48Mb = 0x400,
+ FIX_RATE_54Mb = 0x800,
+} WMI_FIX_RATES_MASK;
+
+typedef PREPACK struct {
+ A_UINT16 fixRateMask; /* see WMI_BIT_RATE */
+} POSTPACK WMI_FIX_RATES_CMD, WMI_FIX_RATES_REPLY;
+
+/*
+ * WMI_SET_RECONNECT_AUTH_MODE_CMDID
+ *
+ * Set authentication mode
+ */
+typedef enum {
+ RECONN_DO_AUTH = 0x00,
+ RECONN_NOT_AUTH = 0x01
+} WMI_AUTH_MODE;
+
+typedef PREPACK struct {
+ A_UINT8 mode;
+} POSTPACK WMI_SET_AUTH_MODE_CMD;
+
+/*
+ * WMI_SET_REASSOC_MODE_CMDID
+ *
+ * Set authentication mode
+ */
+typedef enum {
+ REASSOC_DO_DISASSOC = 0x00,
+ REASSOC_DONOT_DISASSOC = 0x01
+} WMI_REASSOC_MODE;
+
+typedef PREPACK struct {
+ A_UINT8 mode;
+}POSTPACK WMI_SET_REASSOC_MODE_CMD;
+
+typedef enum {
+ ROAM_DATA_TIME = 1, /* Get The Roam Time Data */
+} ROAM_DATA_TYPE;
+
+typedef PREPACK struct {
+ A_UINT32 disassoc_time;
+ A_UINT32 no_txrx_time;
+ A_UINT32 assoc_time;
+ A_UINT32 allow_txrx_time;
+ A_UINT32 last_data_txrx_time;
+ A_UINT32 first_data_txrx_time;
+ A_UINT8 disassoc_bssid[ATH_MAC_LEN];
+ A_INT8 disassoc_bss_rssi;
+ A_UINT8 assoc_bssid[ATH_MAC_LEN];
+ A_INT8 assoc_bss_rssi;
+} POSTPACK WMI_TARGET_ROAM_TIME;
+
+typedef PREPACK struct {
+ PREPACK union {
+ WMI_TARGET_ROAM_TIME roamTime;
+ } POSTPACK u;
+ A_UINT8 roamDataType ;
+} POSTPACK WMI_TARGET_ROAM_DATA;
+
+typedef enum {
+ WMI_WMM_DISABLED = 0,
+ WMI_WMM_ENABLED
+} WMI_WMM_STATUS;
+
+typedef PREPACK struct {
+ A_UINT8 status;
+}POSTPACK WMI_SET_WMM_CMD;
+
+typedef enum {
+ WMI_TXOP_DISABLED = 0,
+ WMI_TXOP_ENABLED
+} WMI_TXOP_CFG;
+
+typedef PREPACK struct {
+ A_UINT8 txopEnable;
+}POSTPACK WMI_SET_WMM_TXOP_CMD;
+
+typedef PREPACK struct {
+ A_UINT8 keepaliveInterval;
+} POSTPACK WMI_SET_KEEPALIVE_CMD;
+
+typedef PREPACK struct {
+ A_BOOL configured;
+ A_UINT8 keepaliveInterval;
+} POSTPACK WMI_GET_KEEPALIVE_CMD;
+
+/*
+ * Add Application specified IE to a management frame
+ */
+#define WMI_MAX_IE_LEN 78
+
+typedef PREPACK struct {
+ A_UINT8 mgmtFrmType; /* one of WMI_MGMT_FRAME_TYPE */
+ A_UINT8 ieLen; /* Length of the IE that should be added to the MGMT frame */
+ A_UINT8 ieInfo[1];
+} POSTPACK WMI_SET_APPIE_CMD;
+
+/*
+ * Notify the WSC registration status to the target
+ */
+#define WSC_REG_ACTIVE 1
+#define WSC_REG_INACTIVE 0
+/* Generic Hal Interface for setting hal paramters. */
+/* Add new Set HAL Param cmdIds here for newer params */
+typedef enum {
+ WHAL_SETCABTO_CMDID = 1,
+}WHAL_CMDID;
+
+typedef PREPACK struct {
+ A_UINT8 cabTimeOut;
+} POSTPACK WHAL_SETCABTO_PARAM;
+
+typedef PREPACK struct {
+ A_UINT8 whalCmdId;
+ A_UINT8 data[1];
+} POSTPACK WHAL_PARAMCMD;
+
+
+#define WOW_MAX_FILTER_LISTS 1 /*4*/
+#define WOW_MAX_FILTERS_PER_LIST 4
+#define WOW_PATTERN_SIZE 64
+#define WOW_MASK_SIZE 64
+
+typedef PREPACK struct {
+ A_UINT8 wow_valid_filter;
+ A_UINT8 wow_filter_id;
+ A_UINT8 wow_filter_size;
+ A_UINT8 wow_filter_offset;
+ A_UINT8 wow_filter_mask[WOW_MASK_SIZE];
+ A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE];
+} POSTPACK WOW_FILTER;
+
+
+typedef PREPACK struct {
+ A_UINT8 wow_valid_list;
+ A_UINT8 wow_list_id;
+ A_UINT8 wow_num_filters;
+ A_UINT8 wow_total_list_size;
+ WOW_FILTER list[WOW_MAX_FILTERS_PER_LIST];
+} POSTPACK WOW_FILTER_LIST;
+
+typedef PREPACK struct {
+ A_BOOL awake;
+ A_BOOL asleep;
+} POSTPACK WMI_SET_HOST_SLEEP_MODE_CMD;
+
+typedef PREPACK struct {
+ A_BOOL enable_wow;
+} POSTPACK WMI_SET_WOW_MODE_CMD;
+
+typedef PREPACK struct {
+ A_UINT8 filter_list_id;
+} POSTPACK WMI_GET_WOW_LIST_CMD;
+
+/*
+ * WMI_GET_WOW_LIST_CMD reply
+ */
+typedef PREPACK struct {
+ A_UINT8 num_filters; /* number of patterns in reply */
+ A_UINT8 this_filter_num; /* this is filter # x of total num_filters */
+ A_UINT8 wow_mode;
+ A_UINT8 host_mode;
+ WOW_FILTER wow_filters[1];
+} POSTPACK WMI_GET_WOW_LIST_REPLY;
+
+typedef PREPACK struct {
+ A_UINT8 filter_list_id;
+ A_UINT8 filter_size;
+ A_UINT8 filter_offset;
+ A_UINT8 filter[1];
+} POSTPACK WMI_ADD_WOW_PATTERN_CMD;
+
+typedef PREPACK struct {
+ A_UINT16 filter_list_id;
+ A_UINT16 filter_id;
+} POSTPACK WMI_DEL_WOW_PATTERN_CMD;
+
+typedef PREPACK struct {
+ A_UINT8 macaddr[ATH_MAC_LEN];
+} POSTPACK WMI_SET_MAC_ADDRESS_CMD;
+
+/*
+ * WMI_SET_AKMP_PARAMS_CMD
+ */
+
+#define WMI_AKMP_MULTI_PMKID_EN 0x000001
+
+typedef PREPACK struct {
+ A_UINT32 akmpInfo;
+} POSTPACK WMI_SET_AKMP_PARAMS_CMD;
+
+typedef PREPACK struct {
+ A_UINT8 pmkid[WMI_PMKID_LEN];
+} POSTPACK WMI_PMKID;
+
+/*
+ * WMI_SET_PMKID_LIST_CMD
+ */
+#define WMI_MAX_PMKID_CACHE 8
+
+typedef PREPACK struct {
+ A_UINT32 numPMKID;
+ WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
+} POSTPACK WMI_SET_PMKID_LIST_CMD;
+
+/*
+ * WMI_GET_PMKID_LIST_CMD Reply
+ * Following the Number of PMKIDs is the list of PMKIDs
+ */
+typedef PREPACK struct {
+ A_UINT32 numPMKID;
+ WMI_PMKID pmkidList[1];
+} POSTPACK WMI_PMKID_LIST_REPLY;
+
+/* index used for priority streams */
+typedef enum {
+ WMI_NOT_MAPPED = -1,
+ WMI_CONTROL_PRI = 0,
+ WMI_BEST_EFFORT_PRI = 1,
+ WMI_LOW_PRI = 2,
+ WMI_HIGH_PRI = 3,
+ WMI_HIGHEST_PRI,
+ WMI_PRI_MAX_COUNT
+} WMI_PRI_STREAM_ID;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_H_ */
--- /dev/null
+#ifndef _WMI_API_H_
+#define _WMI_API_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains the definitions for the Wireless Module Interface (WMI).
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wmi_api.h#2 $
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * IP QoS Field definitions according to 802.1p
+ */
+#define BEST_EFFORT_PRI 0
+#define BACKGROUND_PRI 1
+#define EXCELLENT_EFFORT_PRI 3
+#define CONTROLLED_LOAD_PRI 4
+#define VIDEO_PRI 5
+#define VOICE_PRI 6
+#define NETWORK_CONTROL_PRI 7
+#define MAX_NUM_PRI 8
+
+#define UNDEFINED_PRI (0xff)
+
+/* simple mapping of IP TOS field to a WMI priority stream
+ * this mapping was taken from the original linux driver implementation
+ * The operation maps the following
+ *
+ * */
+#define IP_TOS_TO_WMI_PRI(tos) \
+ ((WMI_PRI_STREAM_ID)(((tos) >> 1) & 0x03))
+
+#define WMI_IMPLICIT_PSTREAM_INACTIVITY_INT 5000 /* 5 seconds */
+
+
+struct wmi_t;
+
+void *wmi_init(void *devt);
+
+void wmi_qos_state_init(struct wmi_t *wmip);
+void wmi_shutdown(struct wmi_t *wmip);
+A_UINT16 wmi_get_mapped_qos_queue(struct wmi_t *, A_UINT8);
+A_STATUS wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType);
+A_STATUS wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf);
+A_STATUS wmi_syncpoint(struct wmi_t *wmip);
+A_STATUS wmi_syncpoint_reset(struct wmi_t *wmip);
+WMI_PRI_STREAM_ID wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass);
+A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up);
+
+A_STATUS wmi_control_rx(struct wmi_t *wmip, void *osbuf);
+void wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg);
+void wmi_free_allnodes(struct wmi_t *wmip);
+bss_t *wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr);
+
+
+typedef enum {
+ NO_SYNC_WMIFLAG = 0,
+ SYNC_BEFORE_WMIFLAG, /* transmit all queued data before cmd */
+ SYNC_AFTER_WMIFLAG, /* any new data waits until cmd execs */
+ SYNC_BOTH_WMIFLAG,
+ END_WMIFLAG /* end marker */
+} WMI_SYNC_FLAG;
+
+A_STATUS wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+ WMI_SYNC_FLAG flag);
+A_STATUS wmi_connect_cmd(struct wmi_t *wmip,
+ NETWORK_TYPE netType,
+ DOT11_AUTH_MODE dot11AuthMode,
+ AUTH_MODE authMode,
+ CRYPTO_TYPE pairwiseCrypto,
+ A_UINT8 pairwiseCryptoLen,
+ CRYPTO_TYPE groupCrypto,
+ A_UINT8 groupCryptoLen,
+ int ssidLength,
+ A_UCHAR *ssid,
+ A_UINT8 *bssid,
+ A_UINT16 channel,
+ A_UINT32 ctrl_flags);
+A_STATUS wmi_reconnect_cmd(struct wmi_t *wmip,
+ A_UINT8 *bssid,
+ A_UINT16 channel);
+A_STATUS wmi_disconnect_cmd(struct wmi_t *wmip);
+A_STATUS wmi_getrev_cmd(struct wmi_t *wmip);
+A_STATUS wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
+ A_BOOL forceFgScan, A_BOOL isLegacy,
+ A_UINT32 homeDwellTime, A_UINT32 forceScanInterval);
+A_STATUS wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
+ A_UINT16 fg_end_sec, A_UINT16 bg_sec,
+ A_UINT16 minact_chdw_msec,
+ A_UINT16 maxact_chdw_msec, A_UINT16 pas_chdw_msec,
+ A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
+ A_UINT32 max_dfsch_act_time);
+A_STATUS wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask);
+A_STATUS wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
+ A_UINT8 ssidLength, A_UCHAR *ssid);
+A_STATUS wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons);
+A_STATUS wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmisstime, A_UINT16 bmissbeacons);
+A_STATUS wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
+ A_UINT8 ieLen, A_UINT8 *ieInfo);
+A_STATUS wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode);
+A_STATUS wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
+ A_UINT16 atim_windows, A_UINT16 timeout_value);
+A_STATUS wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
+ A_UINT16 psPollNum, A_UINT16 dtimPolicy);
+A_STATUS wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout);
+A_STATUS wmi_sync_cmd(struct wmi_t *wmip, A_UINT8 syncNumber);
+A_STATUS wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *pstream);
+A_STATUS wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 streamID);
+A_STATUS wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate);
+A_STATUS wmi_get_bitrate_cmd(struct wmi_t *wmip);
+A_INT8 wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate);
+A_STATUS wmi_get_regDomain_cmd(struct wmi_t *wmip);
+A_STATUS wmi_get_channelList_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
+ WMI_PHY_MODE mode, A_INT8 numChan,
+ A_UINT16 *channelList);
+
+A_STATUS wmi_set_snr_threshold_params(struct wmi_t *wmip,
+ WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd);
+A_STATUS wmi_set_rssi_threshold_params(struct wmi_t *wmip,
+ WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd);
+A_STATUS wmi_clr_rssi_snr(struct wmi_t *wmip);
+A_STATUS wmi_set_lq_threshold_params(struct wmi_t *wmip,
+ WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd);
+A_STATUS wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold);
+A_STATUS wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status);
+
+A_STATUS wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 bitmask);
+
+A_STATUS wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie,
+ A_UINT32 source);
+A_STATUS wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
+ A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
+ A_UINT32 valid);
+A_STATUS wmi_get_stats_cmd(struct wmi_t *wmip);
+A_STATUS wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex,
+ CRYPTO_TYPE keyType, A_UINT8 keyUsage,
+ A_UINT8 keyLength,A_UINT8 *keyRSC,
+ A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
+ WMI_SYNC_FLAG sync_flag);
+A_STATUS wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk);
+A_STATUS wmi_delete_krk_cmd(struct wmi_t *wmip);
+A_STATUS wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex);
+A_STATUS wmi_set_akmp_params_cmd(struct wmi_t *wmip,
+ WMI_SET_AKMP_PARAMS_CMD *akmpParams);
+A_STATUS wmi_get_pmkid_list_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
+ WMI_SET_PMKID_LIST_CMD *pmkInfo);
+A_STATUS wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM);
+A_STATUS wmi_get_txPwr_cmd(struct wmi_t *wmip);
+A_STATUS wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on);
+A_STATUS wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid);
+A_STATUS wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex);
+A_STATUS wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en);
+A_STATUS wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
+ A_BOOL set);
+A_STATUS wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop,
+ A_UINT8 eCWmin, A_UINT8 eCWmax,
+ A_UINT8 aifsn);
+A_STATUS wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
+ A_UINT8 trafficClass, A_UINT8 maxRetries,
+ A_UINT8 enableNotify);
+
+void wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid);
+
+A_STATUS wmi_get_roam_tbl_cmd(struct wmi_t *wmip);
+A_STATUS wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType);
+A_STATUS wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
+ A_UINT8 size);
+A_STATUS wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
+ WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
+ A_UINT8 size);
+
+A_STATUS wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode);
+A_STATUS wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
+ A_UINT8 frmType,
+ A_UINT8 *dstMacAddr,
+ A_UINT8 *bssid,
+ A_UINT16 optIEDataLen,
+ A_UINT8 *optIEData);
+
+A_STATUS wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl);
+A_STATUS wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize);
+A_STATUS wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSpLen);
+A_UINT8 convert_userPriority_to_trafficClass(A_UINT8 userPriority);
+A_UINT8 wmi_get_power_mode_cmd(struct wmi_t *wmip);
+A_STATUS wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance);
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+A_STATUS wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32 len);
+#endif
+
+A_STATUS wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status);
+A_STATUS wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd);
+
+
+/*
+ * This function is used to configure the fix rates mask to the target.
+ */
+A_STATUS wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask);
+A_STATUS wmi_get_ratemask_cmd(struct wmi_t *wmip);
+
+A_STATUS wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
+
+A_STATUS wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode);
+
+A_STATUS wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status);
+A_STATUS wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG txEnable);
+
+A_STATUS wmi_get_keepalive_configured(struct wmi_t *wmip);
+A_UINT8 wmi_get_keepalive_cmd(struct wmi_t *wmip);
+A_STATUS wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval);
+
+A_STATUS wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType,
+ A_UINT8 ieLen,A_UINT8 *ieInfo);
+
+A_STATUS wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen);
+A_INT32 wmi_get_rate(A_INT8 rateindex);
+
+/*Wake on Wireless WMI commands*/
+A_STATUS wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, WMI_SET_HOST_SLEEP_MODE_CMD *cmd);
+A_STATUS wmi_set_wow_mode_cmd(struct wmi_t *wmip, WMI_SET_WOW_MODE_CMD *cmd);
+A_STATUS wmi_get_wow_list_cmd(struct wmi_t *wmip, WMI_GET_WOW_LIST_CMD *cmd);
+A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
+ WMI_ADD_WOW_PATTERN_CMD *cmd, A_UINT8* pattern, A_UINT8* mask, A_UINT8 pattern_size);
+A_STATUS wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
+ WMI_DEL_WOW_PATTERN_CMD *cmd);
+A_STATUS wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status);
+
+bss_t *
+wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
+ A_UINT32 ssidLength, A_BOOL bIsWPA2);
+
+void
+wmi_node_return (struct wmi_t *wmip, bss_t *bss);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_API_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * $ATH_LICENSE_HOSTSDK0_C$
+ *
+ * This file contains extensions of the WMI protocol specified in the
+ * Wireless Module Interface (WMI). It includes definitions of all
+ * extended commands and events. Extensions include useful commands
+ * that are not directly related to wireless activities. They may
+ * be hardware-specific, and they might not be supported on all
+ * implementations.
+ *
+ * Extended WMIX commands are encapsulated in a WMI message with
+ * cmd=WMI_EXTENSION_CMD.
+ *
+ */
+
+#ifndef _WMIX_H_
+#define _WMIX_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef ATH_TARGET
+#include "athstartpack.h"
+#endif
+
+#include "dbglog.h"
+
+/*
+ * Extended WMI commands are those that are needed during wireless
+ * operation, but which are not really wireless commands. This allows,
+ * for instance, platform-specific commands. Extended WMI commands are
+ * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID.
+ * Extended WMI events are similarly embedded in a WMI event message with
+ * WMI_EVENT_ID=WMI_EXTENSION_EVENTID.
+ */
+typedef PREPACK struct {
+ A_UINT32 commandId;
+} POSTPACK WMIX_CMD_HDR;
+
+typedef enum {
+ WMIX_DSETOPEN_REPLY_CMDID = 0x2001,
+ WMIX_DSETDATA_REPLY_CMDID,
+ WMIX_GPIO_OUTPUT_SET_CMDID,
+ WMIX_GPIO_INPUT_GET_CMDID,
+ WMIX_GPIO_REGISTER_SET_CMDID,
+ WMIX_GPIO_REGISTER_GET_CMDID,
+ WMIX_GPIO_INTR_ACK_CMDID,
+ WMIX_HB_CHALLENGE_RESP_CMDID,
+ WMIX_DBGLOG_CFG_MODULE_CMDID,
+} WMIX_COMMAND_ID;
+
+typedef enum {
+ WMIX_DSETOPENREQ_EVENTID = 0x3001,
+ WMIX_DSETCLOSE_EVENTID,
+ WMIX_DSETDATAREQ_EVENTID,
+ WMIX_GPIO_INTR_EVENTID,
+ WMIX_GPIO_DATA_EVENTID,
+ WMIX_GPIO_ACK_EVENTID,
+ WMIX_HB_CHALLENGE_RESP_EVENTID,
+ WMIX_DBGLOG_EVENTID,
+} WMIX_EVENT_ID;
+
+/*
+ * =============DataSet support=================
+ */
+
+/*
+ * WMIX_DSETOPENREQ_EVENTID
+ * DataSet Open Request Event
+ */
+typedef PREPACK struct {
+ A_UINT32 dset_id;
+ A_UINT32 targ_dset_handle; /* echo'ed, not used by Host, */
+ A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */
+ A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETOPENREQ_EVENT;
+
+/*
+ * WMIX_DSETCLOSE_EVENTID
+ * DataSet Close Event
+ */
+typedef PREPACK struct {
+ A_UINT32 access_cookie;
+} POSTPACK WMIX_DSETCLOSE_EVENT;
+
+/*
+ * WMIX_DSETDATAREQ_EVENTID
+ * DataSet Data Request Event
+ */
+typedef PREPACK struct {
+ A_UINT32 access_cookie;
+ A_UINT32 offset;
+ A_UINT32 length;
+ A_UINT32 targ_buf; /* echo'ed, not used by Host, */
+ A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */
+ A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */
+} POSTPACK WMIX_DSETDATAREQ_EVENT;
+
+typedef PREPACK struct {
+ A_UINT32 status;
+ A_UINT32 targ_dset_handle;
+ A_UINT32 targ_reply_fn;
+ A_UINT32 targ_reply_arg;
+ A_UINT32 access_cookie;
+ A_UINT32 size;
+ A_UINT32 version;
+} POSTPACK WMIX_DSETOPEN_REPLY_CMD;
+
+typedef PREPACK struct {
+ A_UINT32 status;
+ A_UINT32 targ_buf;
+ A_UINT32 targ_reply_fn;
+ A_UINT32 targ_reply_arg;
+ A_UINT32 length;
+ A_UINT8 buf[1];
+} POSTPACK WMIX_DSETDATA_REPLY_CMD;
+
+
+/*
+ * =============GPIO support=================
+ * All masks are 18-bit masks with bit N operating on GPIO pin N.
+ */
+
+#include "gpio.h"
+
+/*
+ * Set GPIO pin output state.
+ * In order for output to be driven, a pin must be enabled for output.
+ * This can be done during initialization through the GPIO Configuration
+ * DataSet, or during operation with the enable_mask.
+ *
+ * If a request is made to simultaneously set/clear or set/disable or
+ * clear/disable or disable/enable, results are undefined.
+ */
+typedef PREPACK struct {
+ A_UINT32 set_mask; /* pins to set */
+ A_UINT32 clear_mask; /* pins to clear */
+ A_UINT32 enable_mask; /* pins to enable for output */
+ A_UINT32 disable_mask; /* pins to disable/tristate */
+} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD;
+
+/*
+ * Set a GPIO register. For debug/exceptional cases.
+ * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a
+ * platform-dependent header.
+ */
+typedef PREPACK struct {
+ A_UINT32 gpioreg_id; /* GPIO register ID */
+ A_UINT32 value; /* value to write */
+} POSTPACK WMIX_GPIO_REGISTER_SET_CMD;
+
+/* Get a GPIO register. For debug/exceptional cases. */
+typedef PREPACK struct {
+ A_UINT32 gpioreg_id; /* GPIO register to read */
+} POSTPACK WMIX_GPIO_REGISTER_GET_CMD;
+
+/*
+ * Host acknowledges and re-arms GPIO interrupts. A single
+ * message should be used to acknowledge all interrupts that
+ * were delivered in an earlier WMIX_GPIO_INTR_EVENT message.
+ */
+typedef PREPACK struct {
+ A_UINT32 ack_mask; /* interrupts to acknowledge */
+} POSTPACK WMIX_GPIO_INTR_ACK_CMD;
+
+/*
+ * Target informs Host of GPIO interrupts that have ocurred since the
+ * last WMIX_GIPO_INTR_ACK_CMD was received. Additional information --
+ * the current GPIO input values is provided -- in order to support
+ * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
+ */
+typedef PREPACK struct {
+ A_UINT32 intr_mask; /* pending GPIO interrupts */
+ A_UINT32 input_values; /* recent GPIO input values */
+} POSTPACK WMIX_GPIO_INTR_EVENT;
+
+/*
+ * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ * value set to the mask of GPIO pin inputs and
+ * reg_id set to GPIO_ID_NONE
+ *
+ *
+ * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request
+ * using a GPIO_DATA_EVENT with
+ * value set to the value of the requested register and
+ * reg_id identifying the register (reflects the original request)
+ * NB: reg_id supports the future possibility of unsolicited
+ * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may
+ * simplify Host GPIO support.
+ */
+typedef PREPACK struct {
+ A_UINT32 value;
+ A_UINT32 reg_id;
+} POSTPACK WMIX_GPIO_DATA_EVENT;
+
+/*
+ * =============Error Detection support=================
+ */
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_CMDID
+ * Heartbeat Challenge Response command
+ */
+typedef PREPACK struct {
+ A_UINT32 cookie;
+ A_UINT32 source;
+} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD;
+
+/*
+ * WMIX_HB_CHALLENGE_RESP_EVENTID
+ * Heartbeat Challenge Response Event
+ */
+#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD
+
+typedef PREPACK struct {
+ struct dbglog_config_s config;
+} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD;
+
+#ifndef ATH_TARGET
+#include "athendpack.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMIX_H_ */
--- /dev/null
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "AR6Khwreg.h"
+#include "targaddrs.h"
+#include "a_osapi.h"
+#include "hif.h"
+#include "htc_api.h"
+#include "bmi.h"
+#include "bmi_msg.h"
+#include "common_drv.h"
+#include "a_debug.h"
+#include "targaddrs.h"
+
+#define HOST_INTEREST_ITEM_ADDRESS(target, item) \
+(((TargetType) == TARGET_TYPE_AR6001) ? \
+ AR6001_HOST_INTEREST_ITEM_ADDRESS(item) : \
+ AR6002_HOST_INTEREST_ITEM_ADDRESS(item))
+
+
+/* Compile the 4BYTE version of the window register setup routine,
+ * This mitigates host interconnect issues with non-4byte aligned bus requests, some
+ * interconnects use bus adapters that impose strict limitations.
+ * Since diag window access is not intended for performance critical operations, the 4byte mode should
+ * be satisfactory even though it generates 4X the bus activity. */
+
+#ifdef USE_4BYTE_REGISTER_ACCESS
+
+ /* set the window address register (using 4-byte register access ). */
+A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
+{
+ A_STATUS status;
+ A_UINT8 addrValue[4];
+ int i;
+
+ /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
+ * last to initiate the access cycle */
+
+ for (i = 1; i <= 3; i++) {
+ /* fill the buffer with the address byte value we want to hit 4 times*/
+ addrValue[0] = ((A_UINT8 *)&Address)[i];
+ addrValue[1] = addrValue[0];
+ addrValue[2] = addrValue[0];
+ addrValue[3] = addrValue[0];
+
+ /* hit each byte of the register address with a 4-byte write operation to the same address,
+ * this is a harmless operation */
+ status = HIFReadWrite(hifDevice,
+ RegisterAddr+i,
+ addrValue,
+ 4,
+ HIF_WR_SYNC_BYTE_FIX,
+ NULL);
+ if (status != A_OK) {
+ break;
+ }
+ }
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
+ RegisterAddr, Address));
+ return status;
+ }
+
+ /* write the address register again, this time write the whole 4-byte value.
+ * The effect here is that the LSB write causes the cycle to start, the extra
+ * 3 byte write to bytes 1,2,3 has no effect since we are writing the same values again */
+ status = HIFReadWrite(hifDevice,
+ RegisterAddr,
+ (A_UCHAR *)(&Address),
+ 4,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
+ RegisterAddr, Address));
+ return status;
+ }
+
+ return A_OK;
+
+
+
+}
+
+
+#else
+
+ /* set the window address register */
+A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address)
+{
+ A_STATUS status;
+
+ /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written
+ * last to initiate the access cycle */
+ status = HIFReadWrite(hifDevice,
+ RegisterAddr+1, /* write upper 3 bytes */
+ ((A_UCHAR *)(&Address))+1,
+ sizeof(A_UINT32)-1,
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n",
+ RegisterAddr, Address));
+ return status;
+ }
+
+ /* write the LSB of the register, this initiates the operation */
+ status = HIFReadWrite(hifDevice,
+ RegisterAddr,
+ (A_UCHAR *)(&Address),
+ sizeof(A_UINT8),
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n",
+ RegisterAddr, Address));
+ return status;
+ }
+
+ return A_OK;
+}
+
+#endif
+
+/*
+ * Read from the AR6000 through its diagnostic window.
+ * No cooperation from the Target is required for this.
+ */
+A_STATUS
+ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
+{
+ A_STATUS status;
+
+ /* set window register to start read cycle */
+ status = ar6000_SetAddressWindowRegister(hifDevice,
+ WINDOW_READ_ADDR_ADDRESS,
+ *address);
+
+ if (status != A_OK) {
+ return status;
+ }
+
+ /* read the data */
+ status = HIFReadWrite(hifDevice,
+ WINDOW_DATA_ADDRESS,
+ (A_UCHAR *)data,
+ sizeof(A_UINT32),
+ HIF_RD_SYNC_BYTE_INC,
+ NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from WINDOW_DATA_ADDRESS\n"));
+ return status;
+ }
+
+ return status;
+}
+
+
+/*
+ * Write to the AR6000 through its diagnostic window.
+ * No cooperation from the Target is required for this.
+ */
+A_STATUS
+ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data)
+{
+ A_STATUS status;
+
+ /* set write data */
+ status = HIFReadWrite(hifDevice,
+ WINDOW_DATA_ADDRESS,
+ (A_UCHAR *)data,
+ sizeof(A_UINT32),
+ HIF_WR_SYNC_BYTE_INC,
+ NULL);
+ if (status != A_OK) {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to WINDOW_DATA_ADDRESS\n", *data));
+ return status;
+ }
+
+ /* set window register, which starts the write cycle */
+ return ar6000_SetAddressWindowRegister(hifDevice,
+ WINDOW_WRITE_ADDR_ADDRESS,
+ *address);
+}
+
+A_STATUS
+ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+ A_UCHAR *data, A_UINT32 length)
+{
+ A_UINT32 count;
+ A_STATUS status = A_OK;
+
+ for (count = 0; count < length; count += 4, address += 4) {
+ if ((status = ar6000_ReadRegDiag(hifDevice, &address,
+ (A_UINT32 *)&data[count])) != A_OK)
+ {
+ break;
+ }
+ }
+
+ return status;
+}
+
+A_STATUS
+ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address,
+ A_UCHAR *data, A_UINT32 length)
+{
+ A_UINT32 count;
+ A_STATUS status = A_OK;
+
+ for (count = 0; count < length; count += 4, address += 4) {
+ if ((status = ar6000_WriteRegDiag(hifDevice, &address,
+ (A_UINT32 *)&data[count])) != A_OK)
+ {
+ break;
+ }
+ }
+
+ return status;
+}
+
+A_STATUS
+ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice)
+{
+ int i;
+ struct forceROM_s {
+ A_UINT32 addr;
+ A_UINT32 data;
+ };
+ struct forceROM_s *ForceROM;
+ int szForceROM;
+ A_UINT32 instruction;
+
+ static struct forceROM_s ForceROM_REV2[] = {
+ /* NB: This works for old REV2 ROM (old). */
+ {0x00001ff0, 0x175b0027}, /* jump instruction at 0xa0001ff0 */
+ {0x00001ff4, 0x00000000}, /* nop instruction at 0xa0001ff4 */
+
+ {MC_REMAP_TARGET_ADDRESS, 0x00001ff0}, /* remap to 0xa0001ff0 */
+ {MC_REMAP_COMPARE_ADDRESS, 0x01000040},/* ...from 0xbfc00040 */
+ {MC_REMAP_SIZE_ADDRESS, 0x00000000}, /* ...1 cache line */
+ {MC_REMAP_VALID_ADDRESS, 0x00000001}, /* ...remap is valid */
+
+ {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
+
+ {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
+ };
+
+ static struct forceROM_s ForceROM_NEW[] = {
+ /* NB: This works for AR6000 ROM REV3 and beyond. */
+ {LOCAL_SCRATCH_ADDRESS, AR6K_OPTION_IGNORE_FLASH},
+ {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */
+ {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK},
+ };
+
+ /*
+ * Examine a semi-arbitrary instruction that's different
+ * in REV2 and other revisions.
+ * NB: If a Host port does not require simultaneous support
+ * for multiple revisions of Target ROM, this code can be elided.
+ */
+ (void)ar6000_ReadDataDiag(hifDevice, 0x01000040,
+ (A_UCHAR *)&instruction, 4);
+
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("instruction=0x%x\n", instruction));
+
+ if (instruction == 0x3c1aa200) {
+ /* It's an old ROM */
+ ForceROM = ForceROM_REV2;
+ szForceROM = sizeof(ForceROM_REV2)/sizeof(*ForceROM);
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using OLD method\n"));
+ } else {
+ ForceROM = ForceROM_NEW;
+ szForceROM = sizeof(ForceROM_NEW)/sizeof(*ForceROM);
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using NEW method\n"));
+ }
+
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Force Target to execute from ROM....\n"));
+ for (i = 0; i < szForceROM; i++)
+ {
+ if (ar6000_WriteRegDiag(hifDevice,
+ &ForceROM[i].addr,
+ &ForceROM[i].data) != A_OK)
+ {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot force Target to execute ROM!\n"));
+ return A_ERROR;
+ }
+ }
+
+ msleep(50); /* delay to allow dragon to come to BMI phase */
+ return A_OK;
+}
+
+/* reset device */
+A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
+{
+
+#if !defined(DWSIM)
+ A_STATUS status = A_OK;
+ A_UINT32 address;
+ A_UINT32 data;
+
+ do {
+
+ // address = RESET_CONTROL_ADDRESS;
+ data = RESET_CONTROL_COLD_RST_MASK;
+
+ /* Hardcode the address of RESET_CONTROL_ADDRESS based on the target type */
+ if (TargetType == TARGET_TYPE_AR6001) {
+ address = 0x0C000000;
+ } else {
+ if (TargetType == TARGET_TYPE_AR6002) {
+ address = 0x00004000;
+ } else {
+ A_ASSERT(0);
+ }
+ }
+
+ status = ar6000_WriteRegDiag(hifDevice, &address, &data);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ /*
+ * Read back the RESET CAUSE register to ensure that the cold reset
+ * went through.
+ */
+ msleep(2000); /* 2 second delay to allow things to settle down */
+
+
+ // address = RESET_CAUSE_ADDRESS;
+ /* Hardcode the address of RESET_CAUSE_ADDRESS based on the target type */
+ if (TargetType == TARGET_TYPE_AR6001) {
+ address = 0x0C0000CC;
+ } else {
+ if (TargetType == TARGET_TYPE_AR6002) {
+ address = 0x000040C0;
+ } else {
+ A_ASSERT(0);
+ }
+ }
+
+ data = 0;
+ status = ar6000_ReadRegDiag(hifDevice, &address, &data);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Reset Cause readback: 0x%X \n",data));
+ data &= RESET_CAUSE_LAST_MASK;
+ if (data != 2) {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Unable to cold reset the target \n"));
+ }
+
+ } while (FALSE);
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Failed to reset target \n"));
+ }
+#endif
+ return A_OK;
+}
+
+#define REG_DUMP_COUNT_AR6001 38 /* WORDs, derived from AR6001_regdump.h */
+#define REG_DUMP_COUNT_AR6002 32 /* WORDs, derived from AR6002_regdump.h */
+
+
+#if REG_DUMP_COUNT_AR6001 <= REG_DUMP_COUNT_AR6002
+#define REGISTER_DUMP_LEN_MAX REG_DUMP_COUNT_AR6002
+#else
+#define REGISTER_DUMP_LEN_MAX REG_DUMP_COUNT_AR6001
+#endif
+
+void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType)
+{
+ A_UINT32 address;
+ A_UINT32 regDumpArea = 0;
+ A_STATUS status;
+ A_UINT32 regDumpValues[REGISTER_DUMP_LEN_MAX];
+ A_UINT32 regDumpCount = 0;
+ A_UINT32 i;
+
+ do {
+
+ /* the reg dump pointer is copied to the host interest area */
+ address = HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_failure_state);
+
+ if (TargetType == TARGET_TYPE_AR6001) {
+ /* for AR6001, this is a fixed location because the ptr is actually stuck in cache,
+ * this may be fixed in later firmware versions */
+ address = 0x18a0;
+ regDumpCount = REG_DUMP_COUNT_AR6001;
+
+ } else if (TargetType == TARGET_TYPE_AR6002) {
+
+ regDumpCount = REG_DUMP_COUNT_AR6002;
+
+ } else {
+ A_ASSERT(0);
+ }
+
+ /* read RAM location through diagnostic window */
+ status = ar6000_ReadRegDiag(hifDevice, &address, ®DumpArea);
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get ptr to register dump area \n"));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Location of register dump data: 0x%X \n",regDumpArea));
+
+ if (regDumpArea == 0) {
+ /* no reg dump */
+ break;
+ }
+
+ if (TargetType == TARGET_TYPE_AR6001) {
+ regDumpArea &= 0x0FFFFFFF; /* convert to physical address in target memory */
+ }
+
+ /* fetch register dump data */
+ status = ar6000_ReadDataDiag(hifDevice,
+ regDumpArea,
+ (A_UCHAR *)®DumpValues[0],
+ regDumpCount * (sizeof(A_UINT32)));
+
+ if (A_FAILED(status)) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get register dump \n"));
+ break;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Register Dump: \n"));
+
+ for (i = 0; i < regDumpCount; i++) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" %d : 0x%8.8X \n",i, regDumpValues[i]));
+ }
+
+ } while (FALSE);
+
+}
+
--- /dev/null
+
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include "a_debug.h"
+#include "htc_api.h"
+#include "common_drv.h"
+
+/********* CREDIT DISTRIBUTION FUNCTIONS ******************************************/
+
+#define NO_VO_SERVICE 1 /* currently WMI only uses 3 data streams, so we leave VO service inactive */
+
+#ifdef NO_VO_SERVICE
+#define DATA_SVCS_USED 3
+#else
+#define DATA_SVCS_USED 4
+#endif
+
+static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
+
+static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList);
+
+/* reduce an ep's credits back to a set limit */
+static INLINE void ReduceCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+ HTC_ENDPOINT_CREDIT_DIST *pEpDist,
+ int Limit)
+{
+ int credits;
+
+ /* set the new limit */
+ pEpDist->TxCreditsAssigned = Limit;
+
+ if (pEpDist->TxCredits <= Limit) {
+ return;
+ }
+
+ /* figure out how much to take away */
+ credits = pEpDist->TxCredits - Limit;
+ /* take them away */
+ pEpDist->TxCredits -= credits;
+ pCredInfo->CurrentFreeCredits += credits;
+}
+
+/* give an endpoint some credits from the free credit pool */
+#define GiveCredits(pCredInfo,pEpDist,credits) \
+{ \
+ (pEpDist)->TxCredits += (credits); \
+ (pEpDist)->TxCreditsAssigned += (credits); \
+ (pCredInfo)->CurrentFreeCredits -= (credits); \
+}
+
+
+/* default credit init callback.
+ * This function is called in the context of HTCStart() to setup initial (application-specific)
+ * credit distributions */
+static void ar6000_credit_init(void *Context,
+ HTC_ENDPOINT_CREDIT_DIST *pEPList,
+ int TotalCredits)
+{
+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+ int count;
+ COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
+
+ pCredInfo->CurrentFreeCredits = TotalCredits;
+ pCredInfo->TotalAvailableCredits = TotalCredits;
+
+ pCurEpDist = pEPList;
+
+ /* run through the list and initialize */
+ while (pCurEpDist != NULL) {
+
+ /* set minimums for each endpoint */
+ pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg;
+
+ if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
+ /* give control service some credits */
+ GiveCredits(pCredInfo,pCurEpDist,pCurEpDist->TxCreditsMin);
+ /* control service is always marked active, it never goes inactive EVER */
+ SET_EP_ACTIVE(pCurEpDist);
+ } else if (pCurEpDist->ServiceID == WMI_DATA_BK_SVC) {
+ /* this is the lowest priority data endpoint, save this off for easy access */
+ pCredInfo->pLowestPriEpDist = pCurEpDist;
+ }
+
+ /* Streams have to be created (explicit | implicit)for all kinds
+ * of traffic. BE endpoints are also inactive in the beginning.
+ * When BE traffic starts it creates implicit streams that
+ * redistributes credits.
+ */
+
+ /* note, all other endpoints have minimums set but are initially given NO credits.
+ * Credits will be distributed as traffic activity demands */
+ pCurEpDist = pCurEpDist->pNext;
+ }
+
+ if (pCredInfo->CurrentFreeCredits <= 0) {
+ AR_DEBUG_PRINTF(ATH_LOG_INF, ("Not enough credits (%d) to do credit distributions \n", TotalCredits));
+ A_ASSERT(FALSE);
+ return;
+ }
+
+ /* reset list */
+ pCurEpDist = pEPList;
+ /* now run through the list and set max operating credit limits for everyone */
+ while (pCurEpDist != NULL) {
+ if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) {
+ /* control service max is just 1 max message */
+ pCurEpDist->TxCreditsNorm = pCurEpDist->TxCreditsPerMaxMsg;
+ } else {
+ /* for the remaining data endpoints, we assume that each TxCreditsPerMaxMsg are
+ * the same.
+ * We use a simple calculation here, we take the remaining credits and
+ * determine how many max messages this can cover and then set each endpoint's
+ * normal value equal to half this amount.
+ * */
+ count = (pCredInfo->CurrentFreeCredits/pCurEpDist->TxCreditsPerMaxMsg) * pCurEpDist->TxCreditsPerMaxMsg;
+ count = count >> 1;
+ count = max(count,pCurEpDist->TxCreditsPerMaxMsg);
+ /* set normal */
+ pCurEpDist->TxCreditsNorm = count;
+
+ }
+ pCurEpDist = pCurEpDist->pNext;
+ }
+
+}
+
+
+/* default credit distribution callback
+ * This callback is invoked whenever endpoints require credit distributions.
+ * A lock is held while this function is invoked, this function shall NOT block.
+ * The pEPDistList is a list of distribution structures in prioritized order as
+ * defined by the call to the HTCSetCreditDistribution() api.
+ *
+ */
+static void ar6000_credit_distribute(void *Context,
+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList,
+ HTC_CREDIT_DIST_REASON Reason)
+{
+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+ COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context;
+
+ switch (Reason) {
+ case HTC_CREDIT_DIST_SEND_COMPLETE :
+ pCurEpDist = pEPDistList;
+ /* we are given the start of the endpoint distribution list.
+ * There may be one or more endpoints to service.
+ * Run through the list and distribute credits */
+ while (pCurEpDist != NULL) {
+
+ if (pCurEpDist->TxCreditsToDist > 0) {
+ /* return the credits back to the endpoint */
+ pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist;
+ /* always zero out when we are done */
+ pCurEpDist->TxCreditsToDist = 0;
+
+ if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsAssigned) {
+ /* reduce to the assigned limit, previous credit reductions
+ * could have caused the limit to change */
+ ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsAssigned);
+ }
+
+ if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsNorm) {
+ /* oversubscribed endpoints need to reduce back to normal */
+ ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsNorm);
+ }
+ }
+
+ pCurEpDist = pCurEpDist->pNext;
+ }
+
+ A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
+
+ break;
+
+ case HTC_CREDIT_DIST_ACTIVITY_CHANGE :
+ RedistributeCredits(pCredInfo,pEPDistList);
+ break;
+ case HTC_CREDIT_DIST_SEEK_CREDITS :
+ SeekCredits(pCredInfo,pEPDistList);
+ break;
+ case HTC_DUMP_CREDIT_STATE :
+ AR_DEBUG_PRINTF(ATH_LOG_INF, ("Credit Distribution, total : %d, free : %d\n",
+ pCredInfo->TotalAvailableCredits, pCredInfo->CurrentFreeCredits));
+ break;
+ default:
+ break;
+
+ }
+
+}
+
+/* redistribute credits based on activity change */
+static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+ HTC_ENDPOINT_CREDIT_DIST *pEPDistList)
+{
+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist = pEPDistList;
+
+ /* walk through the list and remove credits from inactive endpoints */
+ while (pCurEpDist != NULL) {
+
+ if (pCurEpDist->ServiceID != WMI_CONTROL_SVC) {
+ if (!IS_EP_ACTIVE(pCurEpDist)) {
+ /* EP is inactive, reduce credits back to zero */
+ ReduceCredits(pCredInfo, pCurEpDist, 0);
+ }
+ }
+
+ /* NOTE in the active case, we do not need to do anything further,
+ * when an EP goes active and needs credits, HTC will call into
+ * our distribution function using a reason code of HTC_CREDIT_DIST_SEEK_CREDITS */
+
+ pCurEpDist = pCurEpDist->pNext;
+ }
+
+ A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits);
+
+}
+
+/* HTC has an endpoint that needs credits, pEPDist is the endpoint in question */
+static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo,
+ HTC_ENDPOINT_CREDIT_DIST *pEPDist)
+{
+ HTC_ENDPOINT_CREDIT_DIST *pCurEpDist;
+ int credits = 0;
+ int need;
+
+ do {
+
+ if (pEPDist->ServiceID == WMI_CONTROL_SVC) {
+ /* we never oversubscribe on the control service, this is not
+ * a high performance path and the target never holds onto control
+ * credits for too long */
+ break;
+ }
+
+ /* for all other services, we follow a simple algorithm of
+ * 1. checking the free pool for credits
+ * 2. checking lower priority endpoints for credits to take */
+
+ if (pCredInfo->CurrentFreeCredits >= 2 * pEPDist->TxCreditsSeek) {
+ /* try to give more credits than it needs */
+ credits = 2 * pEPDist->TxCreditsSeek;
+ } else {
+ /* give what we can */
+ credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
+ }
+
+ if (credits >= pEPDist->TxCreditsSeek) {
+ /* we found some to fullfill the seek request */
+ break;
+ }
+
+ /* we don't have enough in the free pool, try taking away from lower priority services
+ *
+ * The rule for taking away credits:
+ * 1. Only take from lower priority endpoints
+ * 2. Only take what is allocated above the minimum (never starve an endpoint completely)
+ * 3. Only take what you need.
+ *
+ * */
+
+ /* starting at the lowest priority */
+ pCurEpDist = pCredInfo->pLowestPriEpDist;
+
+ /* work backwards until we hit the endpoint again */
+ while (pCurEpDist != pEPDist) {
+ /* calculate how many we need so far */
+ need = pEPDist->TxCreditsSeek - pCredInfo->CurrentFreeCredits;
+
+ if ((pCurEpDist->TxCreditsAssigned - need) > pCurEpDist->TxCreditsMin) {
+ /* the current one has been allocated more than it's minimum and it
+ * has enough credits assigned above it's minimum to fullfill our need
+ * try to take away just enough to fullfill our need */
+ ReduceCredits(pCredInfo,
+ pCurEpDist,
+ pCurEpDist->TxCreditsAssigned - need);
+
+ if (pCredInfo->CurrentFreeCredits >= pEPDist->TxCreditsSeek) {
+ /* we have enough */
+ break;
+ }
+ }
+
+ pCurEpDist = pCurEpDist->pPrev;
+ }
+
+ /* return what we can get */
+ credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
+
+ } while (FALSE);
+
+ /* did we find some credits? */
+ if (credits) {
+ /* give what we can */
+ GiveCredits(pCredInfo, pEPDist, credits);
+ }
+
+}
+
+/* initialize and setup credit distribution */
+A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo)
+{
+ HTC_SERVICE_ID servicepriority[5];
+
+ A_MEMZERO(pCredInfo,sizeof(COMMON_CREDIT_STATE_INFO));
+
+ servicepriority[0] = WMI_CONTROL_SVC; /* highest */
+ servicepriority[1] = WMI_DATA_VO_SVC;
+ servicepriority[2] = WMI_DATA_VI_SVC;
+ servicepriority[3] = WMI_DATA_BE_SVC;
+ servicepriority[4] = WMI_DATA_BK_SVC; /* lowest */
+
+ /* set callbacks and priority list */
+ HTCSetCreditDistribution(HTCHandle,
+ pCredInfo,
+ ar6000_credit_distribute,
+ ar6000_credit_init,
+ servicepriority,
+ 5);
+
+ return A_OK;
+}
+
--- /dev/null
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_node.c#1 $
+ */
+/*
+ * IEEE 802.11 node handling support.
+ */
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+#include <a_debug.h>
+#include <ieee80211.h>
+#include <wlan_api.h>
+#include <ieee80211_node.h>
+#include <htc_api.h>
+#include <wmi.h>
+#include <wmi_api.h>
+
+static void wlan_node_timeout(A_ATH_TIMER arg);
+static bss_t * _ieee80211_find_node(struct ieee80211_node_table *nt,
+ const A_UINT8 *macaddr);
+
+bss_t *
+wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size)
+{
+ bss_t *ni;
+
+ ni = A_MALLOC_NOWAIT(sizeof(bss_t));
+
+ if (ni != NULL) {
+ ni->ni_buf = A_MALLOC_NOWAIT(wh_size);
+ if (ni->ni_buf == NULL) {
+ A_FREE(ni);
+ ni = NULL;
+ return ni;
+ }
+ } else {
+ return ni;
+ }
+
+ /* Make sure our lists are clean */
+ ni->ni_list_next = NULL;
+ ni->ni_list_prev = NULL;
+ ni->ni_hash_next = NULL;
+ ni->ni_hash_prev = NULL;
+
+ //
+ // ni_scangen never initialized before and during suspend/resume of winmobile, customer (LG/SEMCO) identified
+ // that some junk has been stored in this, due to this scan list didn't properly updated
+ //
+ ni->ni_scangen = 0;
+
+ return ni;
+}
+
+void
+wlan_node_free(bss_t *ni)
+{
+ if (ni->ni_buf != NULL) {
+ A_FREE(ni->ni_buf);
+ }
+ A_FREE(ni);
+}
+
+void
+wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni,
+ const A_UINT8 *macaddr)
+{
+ int hash;
+
+ A_MEMCPY(ni->ni_macaddr, macaddr, IEEE80211_ADDR_LEN);
+ hash = IEEE80211_NODE_HASH(macaddr);
+ ieee80211_node_initref(ni); /* mark referenced */
+
+ ni->ni_tstamp = A_GET_MS(WLAN_NODE_INACT_TIMEOUT_MSEC);
+ IEEE80211_NODE_LOCK_BH(nt);
+
+ /* Insert at the end of the node list */
+ ni->ni_list_next = NULL;
+ ni->ni_list_prev = nt->nt_node_last;
+ if(nt->nt_node_last != NULL)
+ {
+ nt->nt_node_last->ni_list_next = ni;
+ }
+ nt->nt_node_last = ni;
+ if(nt->nt_node_first == NULL)
+ {
+ nt->nt_node_first = ni;
+ }
+
+ /* Insert into the hash list i.e. the bucket */
+ if((ni->ni_hash_next = nt->nt_hash[hash]) != NULL)
+ {
+ nt->nt_hash[hash]->ni_hash_prev = ni;
+ }
+ ni->ni_hash_prev = NULL;
+ nt->nt_hash[hash] = ni;
+
+ if (!nt->isTimerArmed) {
+ A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
+ nt->isTimerArmed = TRUE;
+ }
+
+ IEEE80211_NODE_UNLOCK_BH(nt);
+}
+
+static bss_t *
+_ieee80211_find_node(struct ieee80211_node_table *nt,
+ const A_UINT8 *macaddr)
+{
+ bss_t *ni;
+ int hash;
+
+ IEEE80211_NODE_LOCK_ASSERT(nt);
+
+ hash = IEEE80211_NODE_HASH(macaddr);
+ for(ni = nt->nt_hash[hash]; ni; ni = ni->ni_hash_next) {
+ if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) {
+ ieee80211_node_incref(ni); /* mark referenced */
+ return ni;
+ }
+ }
+ return NULL;
+}
+
+bss_t *
+wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr)
+{
+ bss_t *ni;
+
+ IEEE80211_NODE_LOCK(nt);
+ ni = _ieee80211_find_node(nt, macaddr);
+ IEEE80211_NODE_UNLOCK(nt);
+ return ni;
+}
+
+/*
+ * Reclaim a node. If this is the last reference count then
+ * do the normal free work. Otherwise remove it from the node
+ * table and mark it gone by clearing the back-reference.
+ */
+void
+wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni)
+{
+ IEEE80211_NODE_LOCK(nt);
+
+ if(ni->ni_list_prev == NULL)
+ {
+ /* First in list so fix the list head */
+ nt->nt_node_first = ni->ni_list_next;
+ }
+ else
+ {
+ ni->ni_list_prev->ni_list_next = ni->ni_list_next;
+ }
+
+ if(ni->ni_list_next == NULL)
+ {
+ /* Last in list so fix list tail */
+ nt->nt_node_last = ni->ni_list_prev;
+ }
+ else
+ {
+ ni->ni_list_next->ni_list_prev = ni->ni_list_prev;
+ }
+
+ if(ni->ni_hash_prev == NULL)
+ {
+ /* First in list so fix the list head */
+ int hash;
+ hash = IEEE80211_NODE_HASH(ni->ni_macaddr);
+ nt->nt_hash[hash] = ni->ni_hash_next;
+ }
+ else
+ {
+ ni->ni_hash_prev->ni_hash_next = ni->ni_hash_next;
+ }
+
+ if(ni->ni_hash_next != NULL)
+ {
+ ni->ni_hash_next->ni_hash_prev = ni->ni_hash_prev;
+ }
+ wlan_node_free(ni);
+
+ IEEE80211_NODE_UNLOCK(nt);
+}
+
+static void
+wlan_node_dec_free(bss_t *ni)
+{
+ if (ieee80211_node_dectestref(ni)) {
+ wlan_node_free(ni);
+ }
+}
+
+void
+wlan_free_allnodes(struct ieee80211_node_table *nt)
+{
+ bss_t *ni;
+
+ while ((ni = nt->nt_node_first) != NULL) {
+ wlan_node_reclaim(nt, ni);
+ }
+}
+
+void
+wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f,
+ void *arg)
+{
+ bss_t *ni;
+ A_UINT32 gen;
+
+ gen = ++nt->nt_scangen;
+
+ IEEE80211_NODE_LOCK(nt);
+ for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
+ if (ni->ni_scangen != gen) {
+ ni->ni_scangen = gen;
+ (void) ieee80211_node_incref(ni);
+ (*f)(arg, ni);
+ wlan_node_dec_free(ni);
+ }
+ }
+ IEEE80211_NODE_UNLOCK(nt);
+}
+
+/*
+ * Node table support.
+ */
+void
+wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt)
+{
+ int i;
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_WLAN, ("node table = 0x%x\n", (A_UINT32)nt));
+ IEEE80211_NODE_LOCK_INIT(nt);
+
+ nt->nt_node_first = nt->nt_node_last = NULL;
+ for(i = 0; i < IEEE80211_NODE_HASHSIZE; i++)
+ {
+ nt->nt_hash[i] = NULL;
+ }
+ A_INIT_TIMER(&nt->nt_inact_timer, wlan_node_timeout, nt);
+ nt->isTimerArmed = FALSE;
+ nt->nt_wmip = wmip;
+}
+
+static void
+wlan_node_timeout(A_ATH_TIMER arg)
+{
+ struct ieee80211_node_table *nt = (struct ieee80211_node_table *)arg;
+ bss_t *bss, *nextBss;
+ A_UINT8 myBssid[IEEE80211_ADDR_LEN], reArmTimer = FALSE;
+
+ wmi_get_current_bssid(nt->nt_wmip, myBssid);
+
+ bss = nt->nt_node_first;
+ while (bss != NULL)
+ {
+ nextBss = bss->ni_list_next;
+ if (A_MEMCMP(myBssid, bss->ni_macaddr, sizeof(myBssid)) != 0)
+ {
+
+ if (bss->ni_tstamp <= A_GET_MS(0))
+ {
+ /*
+ * free up all but the current bss - if set
+ */
+ wlan_node_reclaim(nt, bss);
+ }
+ else
+ {
+ /*
+ * Re-arm timer, only when we have a bss other than
+ * current bss AND it is not aged-out.
+ */
+ reArmTimer = TRUE;
+ }
+ }
+ bss = nextBss;
+ }
+
+ if(reArmTimer)
+ A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0);
+
+ nt->isTimerArmed = reArmTimer;
+}
+
+void
+wlan_node_table_cleanup(struct ieee80211_node_table *nt)
+{
+ A_UNTIMEOUT(&nt->nt_inact_timer);
+ A_DELETE_TIMER(&nt->nt_inact_timer);
+ wlan_free_allnodes(nt);
+ IEEE80211_NODE_LOCK_DESTROY(nt);
+}
+
+bss_t *
+wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid,
+ A_UINT32 ssidLength, A_BOOL bIsWPA2)
+{
+ bss_t *ni = NULL;
+ A_UCHAR *pIESsid = NULL;
+
+ IEEE80211_NODE_LOCK (nt);
+
+ for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) {
+ pIESsid = ni->ni_cie.ie_ssid;
+ if (pIESsid[1] <= 32) {
+
+ // Step 1 : Check SSID
+ if (0x00 == memcmp (pSsid, &pIESsid[2], ssidLength)) {
+
+ // Step 2 : if SSID matches, check WPA or WPA2
+ if (TRUE == bIsWPA2 && NULL != ni->ni_cie.ie_rsn) {
+ ieee80211_node_incref (ni); /* mark referenced */
+ IEEE80211_NODE_UNLOCK (nt);
+ return ni;
+ }
+ if (FALSE == bIsWPA2 && NULL != ni->ni_cie.ie_wpa) {
+ ieee80211_node_incref(ni); /* mark referenced */
+ IEEE80211_NODE_UNLOCK (nt);
+ return ni;
+ }
+ }
+ }
+ }
+
+ IEEE80211_NODE_UNLOCK (nt);
+
+ return NULL;
+}
+
+void
+wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni)
+{
+ IEEE80211_NODE_LOCK (nt);
+ wlan_node_dec_free (ni);
+ IEEE80211_NODE_UNLOCK (nt);
+}
--- /dev/null
+/*-
+ * Copyright (c) 2001 Atsushi Onoe
+ * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/*
+ * IEEE 802.11 input handling.
+ */
+
+#include "a_config.h"
+#include "athdefs.h"
+#include "a_types.h"
+#include "a_osapi.h"
+#include <wmi.h>
+#include <ieee80211.h>
+#include <wlan_api.h>
+
+#define IEEE80211_VERIFY_LENGTH(_len, _minlen) do { \
+ if ((_len) < (_minlen)) { \
+ return A_EINVAL; \
+ } \
+} while (0)
+
+#define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen) do { \
+ if ((__elem) == NULL) { \
+ return A_EINVAL; \
+ } \
+ if ((__elem)[1] > (__maxlen)) { \
+ return A_EINVAL; \
+ } \
+} while (0)
+
+
+/* unaligned little endian access */
+#define LE_READ_2(p) \
+ ((A_UINT16) \
+ ((((A_UINT8 *)(p))[0] ) | (((A_UINT8 *)(p))[1] << 8)))
+
+#define LE_READ_4(p) \
+ ((A_UINT32) \
+ ((((A_UINT8 *)(p))[0] ) | (((A_UINT8 *)(p))[1] << 8) | \
+ (((A_UINT8 *)(p))[2] << 16) | (((A_UINT8 *)(p))[3] << 24)))
+
+
+static int __inline
+iswpaoui(const A_UINT8 *frm)
+{
+ return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
+}
+
+static int __inline
+iswmmoui(const A_UINT8 *frm)
+{
+ return frm[1] > 3 && LE_READ_4(frm+2) == ((WMM_OUI_TYPE<<24)|WMM_OUI);
+}
+
+static int __inline
+iswmmparam(const A_UINT8 *frm)
+{
+ return frm[1] > 5 && frm[6] == WMM_PARAM_OUI_SUBTYPE;
+}
+
+static int __inline
+iswmminfo(const A_UINT8 *frm)
+{
+ return frm[1] > 5 && frm[6] == WMM_INFO_OUI_SUBTYPE;
+}
+
+static int __inline
+isatherosoui(const A_UINT8 *frm)
+{
+ return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
+}
+
+static int __inline
+iswscoui(const A_UINT8 *frm)
+{
+ return frm[1] > 3 && LE_READ_4(frm+2) == ((0x04<<24)|WPA_OUI);
+}
+
+A_STATUS
+wlan_parse_beacon(A_UINT8 *buf, int framelen, struct ieee80211_common_ie *cie)
+{
+ A_UINT8 *frm, *efrm;
+
+ frm = buf;
+ efrm = (A_UINT8 *) (frm + framelen);
+
+ /*
+ * beacon/probe response frame format
+ * [8] time stamp
+ * [2] beacon interval
+ * [2] capability information
+ * [tlv] ssid
+ * [tlv] supported rates
+ * [tlv] country information
+ * [tlv] parameter set (FH/DS)
+ * [tlv] erp information
+ * [tlv] extended supported rates
+ * [tlv] WMM
+ * [tlv] WPA or RSN
+ * [tlv] Atheros Advanced Capabilities
+ */
+ IEEE80211_VERIFY_LENGTH(efrm - frm, 12);
+ A_MEMZERO(cie, sizeof(*cie));
+
+ cie->ie_tstamp = frm; frm += 8;
+ cie->ie_beaconInt = A_LE2CPU16(*(A_UINT16 *)frm); frm += 2;
+ cie->ie_capInfo = A_LE2CPU16(*(A_UINT16 *)frm); frm += 2;
+ cie->ie_chan = 0;
+
+ while (frm < efrm) {
+ switch (*frm) {
+ case IEEE80211_ELEMID_SSID:
+ cie->ie_ssid = frm;
+ break;
+ case IEEE80211_ELEMID_RATES:
+ cie->ie_rates = frm;
+ break;
+ case IEEE80211_ELEMID_COUNTRY:
+ cie->ie_country = frm;
+ break;
+ case IEEE80211_ELEMID_FHPARMS:
+ break;
+ case IEEE80211_ELEMID_DSPARMS:
+ cie->ie_chan = frm[2];
+ break;
+ case IEEE80211_ELEMID_TIM:
+ cie->ie_tim = frm;
+ break;
+ case IEEE80211_ELEMID_IBSSPARMS:
+ break;
+ case IEEE80211_ELEMID_XRATES:
+ cie->ie_xrates = frm;
+ break;
+ case IEEE80211_ELEMID_ERP:
+ if (frm[1] != 1) {
+ //A_PRINTF("Discarding ERP Element - Bad Len\n");
+ return A_EINVAL;
+ }
+ cie->ie_erp = frm[2];
+ break;
+ case IEEE80211_ELEMID_RSN:
+ cie->ie_rsn = frm;
+ break;
+ case IEEE80211_ELEMID_VENDOR:
+ if (iswpaoui(frm)) {
+ cie->ie_wpa = frm;
+ } else if (iswmmoui(frm)) {
+ cie->ie_wmm = frm;
+ } else if (isatherosoui(frm)) {
+ cie->ie_ath = frm;
+ } else if(iswscoui(frm)) {
+ cie->ie_wsc = frm;
+ }
+ break;
+ default:
+ break;
+ }
+ frm += frm[1] + 2;
+ }
+ IEEE80211_VERIFY_ELEMENT(cie->ie_rates, IEEE80211_RATE_MAXSIZE);
+ IEEE80211_VERIFY_ELEMENT(cie->ie_ssid, IEEE80211_NWID_LEN);
+
+ return A_OK;
+}
--- /dev/null
+/*
+ * Copyright (c) 2004-2005 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This module implements frequently used wlan utilies
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_utils.c#1 $
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+
+/*
+ * converts ieee channel number to frequency
+ */
+A_UINT16
+wlan_ieee2freq(int chan)
+{
+ if (chan == 14) {
+ return 2484;
+ }
+ if (chan < 14) { /* 0-13 */
+ return (2407 + (chan*5));
+ }
+ if (chan < 27) { /* 15-26 */
+ return (2512 + ((chan-15)*20));
+ }
+ return (5000 + (chan*5));
+}
+
+/*
+ * Converts MHz frequency to IEEE channel number.
+ */
+A_UINT32
+wlan_freq2ieee(A_UINT16 freq)
+{
+ if (freq == 2484)
+ return 14;
+ if (freq < 2484)
+ return (freq - 2407) / 5;
+ if (freq < 5000)
+ return 15 + ((freq - 2512) / 20);
+ return (freq - 5000) / 5;
+}
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This module implements the hardware independent layer of the
+ * Wireless Module Interface (WMI) protocol.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi.c#3 $
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#include <a_config.h>
+#include <athdefs.h>
+#include <a_types.h>
+#include <a_osapi.h>
+#include "htc.h"
+#include "htc_api.h"
+#include "wmi.h"
+#include <ieee80211.h>
+#include <ieee80211_node.h>
+#include <wlan_api.h>
+#include <wmi_api.h>
+#include "dset_api.h"
+#include "gpio_api.h"
+#include "wmi_host.h"
+#include "a_drv.h"
+#include "a_drv_api.h"
+#include "a_debug.h"
+#include "dbglog_api.h"
+
+static A_STATUS wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_sync_point(struct wmi_t *wmip);
+
+static A_STATUS wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+
+static A_STATUS wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+#ifdef CONFIG_HOST_DSET_SUPPORT
+static A_STATUS wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+
+static A_STATUS wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap,
+ int len);
+static A_STATUS
+wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len);
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+static A_STATUS wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+static A_STATUS wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+#endif
+
+static A_STATUS
+wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_BOOL
+wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex);
+
+static A_STATUS
+wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS
+wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+static A_STATUS wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len);
+
+int wps_enable;
+static const A_INT32 wmi_rateTable[] = {
+ 1000,
+ 2000,
+ 5500,
+ 11000,
+ 6000,
+ 9000,
+ 12000,
+ 18000,
+ 24000,
+ 36000,
+ 48000,
+ 54000,
+ 0};
+
+#define MODE_A_SUPPORT_RATE_START 4
+#define MODE_A_SUPPORT_RATE_STOP 11
+
+#define MODE_GONLY_SUPPORT_RATE_START MODE_A_SUPPORT_RATE_START
+#define MODE_GONLY_SUPPORT_RATE_STOP MODE_A_SUPPORT_RATE_STOP
+
+#define MODE_B_SUPPORT_RATE_START 0
+#define MODE_B_SUPPORT_RATE_STOP 3
+
+#define MODE_G_SUPPORT_RATE_START 0
+#define MODE_G_SUPPORT_RATE_STOP 11
+
+#define MAX_NUMBER_OF_SUPPORT_RATES (MODE_G_SUPPORT_RATE_STOP + 1)
+
+/* 802.1d to AC mapping. Refer pg 57 of WMM-test-plan-v1.2 */
+const A_UINT8 up_to_ac[]= {
+ WMM_AC_BE,
+ WMM_AC_BK,
+ WMM_AC_BK,
+ WMM_AC_BE,
+ WMM_AC_VI,
+ WMM_AC_VI,
+ WMM_AC_VO,
+ WMM_AC_VO,
+ };
+
+void *
+wmi_init(void *devt)
+{
+ struct wmi_t *wmip;
+
+ wmip = A_MALLOC(sizeof(struct wmi_t));
+ if (wmip == NULL) {
+ return (NULL);
+ }
+ A_MEMZERO(wmip, sizeof(*wmip));
+ A_MUTEX_INIT(&wmip->wmi_lock);
+ wmip->wmi_devt = devt;
+ wlan_node_table_init(wmip, &wmip->wmi_scan_table);
+ wmi_qos_state_init(wmip);
+ wmip->wmi_powerMode = REC_POWER;
+ wmip->wmi_phyMode = WMI_11G_MODE;
+
+ return (wmip);
+}
+
+void
+wmi_qos_state_init(struct wmi_t *wmip)
+{
+ A_UINT8 i;
+
+ if (wmip == NULL) {
+ return;
+ }
+ LOCK_WMI(wmip);
+
+ /* Initialize QoS States */
+ wmip->wmi_numQoSStream = 0;
+
+ wmip->wmi_fatPipeExists = 0;
+
+ for (i=0; i < WMM_NUM_AC; i++) {
+ wmip->wmi_streamExistsForAC[i]=0;
+ }
+
+ /* Initialize the static Wmi stream Pri to WMM AC mappings Arrays */
+ WMI_INIT_WMISTREAM_AC_MAP(wmip);
+
+ UNLOCK_WMI(wmip);
+
+ A_WMI_SET_NUMDATAENDPTS(wmip->wmi_devt, 1);
+}
+
+void
+wmi_shutdown(struct wmi_t *wmip)
+{
+ if (wmip != NULL) {
+ wlan_node_table_cleanup(&wmip->wmi_scan_table);
+ if (A_IS_MUTEX_VALID(&wmip->wmi_lock)) {
+ A_MUTEX_DELETE(&wmip->wmi_lock);
+ }
+ A_FREE(wmip);
+ }
+}
+
+/*
+ * performs DIX to 802.3 encapsulation for transmit packets.
+ * uses passed in buffer. Returns buffer or NULL if failed.
+ * Assumes the entire DIX header is contigous and that there is
+ * enough room in the buffer for a 802.3 mac header and LLC+SNAP headers.
+ */
+A_STATUS
+wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf)
+{
+ A_UINT8 *datap;
+ A_UINT16 typeorlen;
+ ATH_MAC_HDR macHdr;
+ ATH_LLC_SNAP_HDR *llcHdr;
+
+ A_ASSERT(osbuf != NULL);
+
+ if (A_NETBUF_HEADROOM(osbuf) <
+ (sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR)))
+ {
+ return A_NO_MEMORY;
+ }
+
+ datap = A_NETBUF_DATA(osbuf);
+
+ typeorlen = *(A_UINT16 *)(datap + ATH_MAC_LEN + ATH_MAC_LEN);
+
+ if (!IS_ETHERTYPE(A_BE2CPU16(typeorlen))) {
+ /*
+ * packet is already in 802.3 format - return success
+ */
+ A_DPRINTF(DBG_WMI, (DBGFMT "packet already 802.3\n", DBGARG));
+ return (A_OK);
+ }
+
+ /*
+ * Save mac fields and length to be inserted later
+ */
+ A_MEMCPY(macHdr.dstMac, datap, ATH_MAC_LEN);
+ A_MEMCPY(macHdr.srcMac, datap + ATH_MAC_LEN, ATH_MAC_LEN);
+ macHdr.typeOrLen = A_CPU2BE16(A_NETBUF_LEN(osbuf) - sizeof(ATH_MAC_HDR) +
+ sizeof(ATH_LLC_SNAP_HDR));
+
+ /*
+ * Make room for LLC+SNAP headers
+ */
+ if (A_NETBUF_PUSH(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
+ return A_NO_MEMORY;
+ }
+
+ datap = A_NETBUF_DATA(osbuf);
+
+ A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
+
+ llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
+ llcHdr->dsap = 0xAA;
+ llcHdr->ssap = 0xAA;
+ llcHdr->cntl = 0x03;
+ llcHdr->orgCode[0] = 0x0;
+ llcHdr->orgCode[1] = 0x0;
+ llcHdr->orgCode[2] = 0x0;
+ llcHdr->etherType = typeorlen;
+
+ return (A_OK);
+}
+
+/*
+ * Adds a WMI data header
+ * Assumes there is enough room in the buffer to add header.
+ */
+A_STATUS
+wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType)
+{
+ WMI_DATA_HDR *dtHdr;
+
+ A_ASSERT(osbuf != NULL);
+
+ if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
+ return A_NO_MEMORY;
+ }
+
+ dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
+ dtHdr->info = msgType;
+ dtHdr->rssi = 0;
+
+ return (A_OK);
+}
+
+A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up)
+{
+ A_UINT8 *datap;
+ A_UINT8 trafficClass = WMM_AC_BE, userPriority = up;
+ ATH_LLC_SNAP_HDR *llcHdr;
+ A_UINT16 ipType = IP_ETHERTYPE;
+ WMI_DATA_HDR *dtHdr;
+ WMI_CREATE_PSTREAM_CMD cmd;
+ A_BOOL streamExists = FALSE;
+
+ A_ASSERT(osbuf != NULL);
+
+ datap = A_NETBUF_DATA(osbuf);
+
+ if (up == UNDEFINED_PRI) {
+ llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(WMI_DATA_HDR) +
+ sizeof(ATH_MAC_HDR));
+
+ if (llcHdr->etherType == A_CPU2BE16(ipType)) {
+ /* Extract the endpoint info from the TOS field in the IP header */
+ userPriority = A_WMI_IPTOS_TO_USERPRIORITY(((A_UINT8 *)llcHdr) + sizeof(ATH_LLC_SNAP_HDR));
+ }
+ }
+
+ if (userPriority < MAX_NUM_PRI) {
+ trafficClass = convert_userPriority_to_trafficClass(userPriority);
+ }
+
+ dtHdr = (WMI_DATA_HDR *)datap;
+ if(dir==UPLINK_TRAFFIC)
+ dtHdr->info |= (userPriority & WMI_DATA_HDR_UP_MASK) << WMI_DATA_HDR_UP_SHIFT; /* lower 3-bits are 802.1d priority */
+
+ LOCK_WMI(wmip);
+ streamExists = wmip->wmi_fatPipeExists;
+ UNLOCK_WMI(wmip);
+
+ if (!(streamExists & (1 << trafficClass))) {
+
+ A_MEMZERO(&cmd, sizeof(cmd));
+ cmd.trafficClass = trafficClass;
+ cmd.userPriority = userPriority;
+ cmd.inactivityInt = WMI_IMPLICIT_PSTREAM_INACTIVITY_INT;
+ /* Implicit streams are created with TSID 0xFF */
+ cmd.tsid = WMI_IMPLICIT_PSTREAM;
+ wmi_create_pstream_cmd(wmip, &cmd);
+ }
+
+ return trafficClass;
+}
+
+WMI_PRI_STREAM_ID
+wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass)
+{
+ return WMI_ACCESSCATEGORY_WMISTREAM(wmip, trafficClass);
+}
+
+/*
+ * performs 802.3 to DIX encapsulation for received packets.
+ * Assumes the entire 802.3 header is contigous.
+ */
+A_STATUS
+wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf)
+{
+ A_UINT8 *datap;
+ ATH_MAC_HDR macHdr;
+ ATH_LLC_SNAP_HDR *llcHdr;
+
+ A_ASSERT(osbuf != NULL);
+ datap = A_NETBUF_DATA(osbuf);
+
+ A_MEMCPY(&macHdr, datap, sizeof(ATH_MAC_HDR));
+ llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR));
+ macHdr.typeOrLen = llcHdr->etherType;
+
+ if (A_NETBUF_PULL(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) {
+ return A_NO_MEMORY;
+ }
+
+ datap = A_NETBUF_DATA(osbuf);
+
+ A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR));
+
+ return (A_OK);
+}
+
+/*
+ * Removes a WMI data header
+ */
+A_STATUS
+wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf)
+{
+ A_ASSERT(osbuf != NULL);
+
+ return (A_NETBUF_PULL(osbuf, sizeof(WMI_DATA_HDR)));
+}
+
+void
+wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg)
+{
+ wlan_iterate_nodes(&wmip->wmi_scan_table, f, arg);
+}
+
+/*
+ * WMI Extended Event received from Target.
+ */
+A_STATUS
+wmi_control_rx_xtnd(struct wmi_t *wmip, void *osbuf)
+{
+ WMIX_CMD_HDR *cmd;
+ A_UINT16 id;
+ A_UINT8 *datap;
+ A_UINT32 len;
+ A_STATUS status = A_OK;
+
+ if (A_NETBUF_LEN(osbuf) < sizeof(WMIX_CMD_HDR)) {
+ A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
+ wmip->wmi_stats.cmd_len_err++;
+ A_NETBUF_FREE(osbuf);
+ return A_ERROR;
+ }
+
+ cmd = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
+ id = cmd->commandId;
+
+ if (A_NETBUF_PULL(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
+ A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
+ wmip->wmi_stats.cmd_len_err++;
+ A_NETBUF_FREE(osbuf);
+ return A_ERROR;
+ }
+
+ datap = A_NETBUF_DATA(osbuf);
+ len = A_NETBUF_LEN(osbuf);
+
+ switch (id) {
+ case (WMIX_DSETOPENREQ_EVENTID):
+ status = wmi_dset_open_req_rx(wmip, datap, len);
+ break;
+#ifdef CONFIG_HOST_DSET_SUPPORT
+ case (WMIX_DSETCLOSE_EVENTID):
+ status = wmi_dset_close_rx(wmip, datap, len);
+ break;
+ case (WMIX_DSETDATAREQ_EVENTID):
+ status = wmi_dset_data_req_rx(wmip, datap, len);
+ break;
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+ case (WMIX_GPIO_INTR_EVENTID):
+ wmi_gpio_intr_rx(wmip, datap, len);
+ break;
+ case (WMIX_GPIO_DATA_EVENTID):
+ wmi_gpio_data_rx(wmip, datap, len);
+ break;
+ case (WMIX_GPIO_ACK_EVENTID):
+ wmi_gpio_ack_rx(wmip, datap, len);
+ break;
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+ case (WMIX_HB_CHALLENGE_RESP_EVENTID):
+ wmi_hbChallengeResp_rx(wmip, datap, len);
+ break;
+ case (WMIX_DBGLOG_EVENTID):
+ wmi_dbglog_event_rx(wmip, datap, len);
+ break;
+ default:
+ A_DPRINTF(DBG_WMI|DBG_ERROR,
+ (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
+ wmip->wmi_stats.cmd_id_err++;
+ status = A_ERROR;
+ break;
+ }
+
+ return status;
+}
+
+/*
+ * Control Path
+ */
+A_UINT32 cmdRecvNum;
+
+A_STATUS
+wmi_control_rx(struct wmi_t *wmip, void *osbuf)
+{
+ WMI_CMD_HDR *cmd;
+ A_UINT16 id;
+ A_UINT8 *datap;
+ A_UINT32 len, i, loggingReq;
+ A_STATUS status = A_OK;
+
+ A_ASSERT(osbuf != NULL);
+ if (A_NETBUF_LEN(osbuf) < sizeof(WMI_CMD_HDR)) {
+ A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG));
+ wmip->wmi_stats.cmd_len_err++;
+ A_NETBUF_FREE(osbuf);
+ return A_ERROR;
+ }
+
+ cmd = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
+ id = cmd->commandId;
+
+ if (A_NETBUF_PULL(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
+ A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG));
+ wmip->wmi_stats.cmd_len_err++;
+ A_NETBUF_FREE(osbuf);
+ return A_ERROR;
+ }
+
+ datap = A_NETBUF_DATA(osbuf);
+ len = A_NETBUF_LEN(osbuf);
+
+ ar6000_get_driver_cfg(wmip->wmi_devt,
+ AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS,
+ &loggingReq);
+
+ if(loggingReq) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI %d \n",id));
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI recv, MsgNo %d : ", cmdRecvNum));
+ for(i = 0; i < len; i++)
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("%x ", datap[i]));
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("\n"));
+ }
+
+ LOCK_WMI(wmip);
+ cmdRecvNum++;
+ UNLOCK_WMI(wmip);
+
+ switch (id) {
+ case (WMI_GET_BITRATE_CMDID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_BITRATE_CMDID\n", DBGARG));
+ status = wmi_bitrate_reply_rx(wmip, datap, len);
+ break;
+ case (WMI_GET_CHANNEL_LIST_CMDID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_CHANNEL_LIST_CMDID\n", DBGARG));
+ status = wmi_channelList_reply_rx(wmip, datap, len);
+ break;
+ case (WMI_GET_TX_PWR_CMDID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_TX_PWR_CMDID\n", DBGARG));
+ status = wmi_txPwr_reply_rx(wmip, datap, len);
+ break;
+ case (WMI_READY_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_READY_EVENTID\n", DBGARG));
+ status = wmi_ready_event_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ A_WMI_DBGLOG_INIT_DONE(wmip->wmi_devt);
+ break;
+ case (WMI_CONNECT_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CONNECT_EVENTID\n", DBGARG));
+ status = wmi_connect_event_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_DISCONNECT_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_DISCONNECT_EVENTID\n", DBGARG));
+ status = wmi_disconnect_event_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_TKIP_MICERR_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TKIP_MICERR_EVENTID\n", DBGARG));
+ status = wmi_tkip_micerr_event_rx(wmip, datap, len);
+ break;
+ case (WMI_BSSINFO_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_BSSINFO_EVENTID\n", DBGARG));
+ status = wmi_bssInfo_event_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_REGDOMAIN_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REGDOMAIN_EVENTID\n", DBGARG));
+ status = wmi_regDomain_event_rx(wmip, datap, len);
+ break;
+ case (WMI_PSTREAM_TIMEOUT_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_PSTREAM_TIMEOUT_EVENTID\n", DBGARG));
+ status = wmi_pstream_timeout_event_rx(wmip, datap, len);
+ /* pstreams are fatpipe abstractions that get implicitly created.
+ * User apps only deal with thinstreams. creation of a thinstream
+ * by the user or data traffic flow in an AC triggers implicit
+ * pstream creation. Do we need to send this event to App..?
+ * no harm in sending it.
+ */
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_NEIGHBOR_REPORT_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_NEIGHBOR_REPORT_EVENTID\n", DBGARG));
+ status = wmi_neighborReport_event_rx(wmip, datap, len);
+ break;
+ case (WMI_SCAN_COMPLETE_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SCAN_COMPLETE_EVENTID\n", DBGARG));
+ status = wmi_scanComplete_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_CMDERROR_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CMDERROR_EVENTID\n", DBGARG));
+ status = wmi_errorEvent_rx(wmip, datap, len);
+ break;
+ case (WMI_REPORT_STATISTICS_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_STATISTICS_EVENTID\n", DBGARG));
+ status = wmi_statsEvent_rx(wmip, datap, len);
+ break;
+ case (WMI_RSSI_THRESHOLD_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_RSSI_THRESHOLD_EVENTID\n", DBGARG));
+ status = wmi_rssiThresholdEvent_rx(wmip, datap, len);
+ break;
+ case (WMI_ERROR_REPORT_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_ERROR_REPORT_EVENTID\n", DBGARG));
+ status = wmi_reportErrorEvent_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_OPT_RX_FRAME_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_OPT_RX_FRAME_EVENTID\n", DBGARG));
+ status = wmi_opt_frame_event_rx(wmip, datap, len);
+ break;
+ case (WMI_REPORT_ROAM_TBL_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_TBL_EVENTID\n", DBGARG));
+ status = wmi_roam_tbl_event_rx(wmip, datap, len);
+ break;
+ case (WMI_EXTENSION_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_EXTENSION_EVENTID\n", DBGARG));
+ status = wmi_control_rx_xtnd(wmip, osbuf);
+ break;
+ case (WMI_CAC_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CAC_EVENTID\n", DBGARG));
+ status = wmi_cac_event_rx(wmip, datap, len);
+ break;
+ case (WMI_REPORT_ROAM_DATA_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_DATA_EVENTID\n", DBGARG));
+ status = wmi_roam_data_event_rx(wmip, datap, len);
+ break;
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+ case (WMI_TEST_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TEST_EVENTID\n", DBGARG));
+ status = wmi_tcmd_test_report_rx(wmip, datap, len);
+ break;
+#endif
+ case (WMI_GET_FIXRATES_CMDID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_FIXRATES_CMDID\n", DBGARG));
+ status = wmi_ratemask_reply_rx(wmip, datap, len);
+ break;
+ case (WMI_TX_RETRY_ERR_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TX_RETRY_ERR_EVENTID\n", DBGARG));
+ status = wmi_txRetryErrEvent_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_SNR_THRESHOLD_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SNR_THRESHOLD_EVENTID\n", DBGARG));
+ status = wmi_snrThresholdEvent_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_LQ_THRESHOLD_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_LQ_THRESHOLD_EVENTID\n", DBGARG));
+ status = wmi_lqThresholdEvent_rx(wmip, datap, len);
+ A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len);
+ break;
+ case (WMI_APLIST_EVENTID):
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Received APLIST Event\n"));
+ status = wmi_aplistEvent_rx(wmip, datap, len);
+ break;
+ case (WMI_GET_KEEPALIVE_CMDID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_KEEPALIVE_CMDID\n", DBGARG));
+ status = wmi_keepalive_reply_rx(wmip, datap, len);
+ break;
+ case (WMI_GET_WOW_LIST_EVENTID):
+ status = wmi_get_wow_list_event_rx(wmip, datap, len);
+ break;
+ case (WMI_GET_PMKID_LIST_EVENTID):
+ A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_PMKID_LIST Event\n", DBGARG));
+ status = wmi_get_pmkid_list_event_rx(wmip, datap, len);
+ break;
+ default:
+ A_DPRINTF(DBG_WMI|DBG_ERROR,
+ (DBGFMT "Unknown id 0x%x\n", DBGARG, id));
+ wmip->wmi_stats.cmd_id_err++;
+ status = A_ERROR;
+ break;
+ }
+
+ A_NETBUF_FREE(osbuf);
+
+ return status;
+}
+
+static A_STATUS
+wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_READY_EVENT *ev = (WMI_READY_EVENT *)datap;
+
+ if (len < sizeof(WMI_READY_EVENT)) {
+ return A_EINVAL;
+ }
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+ wmip->wmi_ready = TRUE;
+ A_WMI_READY_EVENT(wmip->wmi_devt, ev->macaddr, ev->phyCapability);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_CONNECT_EVENT *ev;
+
+ if (len < sizeof(WMI_CONNECT_EVENT)) {
+ return A_EINVAL;
+ }
+ ev = (WMI_CONNECT_EVENT *)datap;
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "freq %d bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+ DBGARG, ev->channel,
+ ev->bssid[0], ev->bssid[1], ev->bssid[2],
+ ev->bssid[3], ev->bssid[4], ev->bssid[5]));
+
+ A_MEMCPY(wmip->wmi_bssid, ev->bssid, ATH_MAC_LEN);
+
+ A_WMI_CONNECT_EVENT(wmip->wmi_devt, ev->channel, ev->bssid,
+ ev->listenInterval, ev->beaconInterval,
+ ev->networkType, ev->beaconIeLen,
+ ev->assocReqLen, ev->assocRespLen,
+ ev->assocInfo);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_REG_DOMAIN_EVENT *ev;
+
+ if (len < sizeof(*ev)) {
+ return A_EINVAL;
+ }
+ ev = (WMI_REG_DOMAIN_EVENT *)datap;
+
+ A_WMI_REGDOMAIN_EVENT(wmip->wmi_devt, ev->regDomain);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_NEIGHBOR_REPORT_EVENT *ev;
+ int numAps;
+
+ if (len < sizeof(*ev)) {
+ return A_EINVAL;
+ }
+ ev = (WMI_NEIGHBOR_REPORT_EVENT *)datap;
+ numAps = ev->numberOfAps;
+
+ if (len < (int)(sizeof(*ev) + ((numAps - 1) * sizeof(WMI_NEIGHBOR_INFO)))) {
+ return A_EINVAL;
+ }
+
+ A_WMI_NEIGHBORREPORT_EVENT(wmip->wmi_devt, numAps, ev->neighbor);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_DISCONNECT_EVENT *ev;
+
+ if (len < sizeof(WMI_DISCONNECT_EVENT)) {
+ return A_EINVAL;
+ }
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ ev = (WMI_DISCONNECT_EVENT *)datap;
+
+ A_MEMZERO(wmip->wmi_bssid, sizeof(wmip->wmi_bssid));
+
+ A_WMI_DISCONNECT_EVENT(wmip->wmi_devt, ev->disconnectReason, ev->bssid,
+ ev->assocRespLen, ev->assocInfo, ev->protocolReasonStatus);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_TKIP_MICERR_EVENT *ev;
+
+ if (len < sizeof(*ev)) {
+ return A_EINVAL;
+ }
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ ev = (WMI_TKIP_MICERR_EVENT *)datap;
+ A_WMI_TKIP_MICERR_EVENT(wmip->wmi_devt, ev->keyid, ev->ismcast);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ bss_t *bss;
+ WMI_BSS_INFO_HDR *bih;
+ A_UINT8 *buf;
+ A_UINT32 nodeCachingAllowed;
+
+ if (len <= sizeof(WMI_BSS_INFO_HDR)) {
+ return A_EINVAL;
+ }
+
+ A_WMI_BSSINFO_EVENT_RX(wmip->wmi_devt, datap, len);
+ /* What is driver config for wlan node caching? */
+ if(ar6000_get_driver_cfg(wmip->wmi_devt,
+ AR6000_DRIVER_CFG_GET_WLANNODECACHING,
+ &nodeCachingAllowed) != A_OK) {
+ return A_EINVAL;
+ }
+
+ if(!nodeCachingAllowed) {
+ return A_OK;
+ }
+
+
+ bih = (WMI_BSS_INFO_HDR *)datap;
+ buf = datap + sizeof(WMI_BSS_INFO_HDR);
+ len -= sizeof(WMI_BSS_INFO_HDR);
+
+ A_DPRINTF(DBG_WMI2, (DBGFMT "bssInfo event - ch %u, rssi %02x, "
+ "bssid \"%02x:%02x:%02x:%02x:%02x:%02x\"\n", DBGARG,
+ bih->channel, (unsigned char) bih->rssi, bih->bssid[0],
+ bih->bssid[1], bih->bssid[2], bih->bssid[3], bih->bssid[4],
+ bih->bssid[5]));
+
+ if(wps_enable && (bih->frameType == PROBERESP_FTYPE) ) {
+ printk("%s() A_OK 2\n", __FUNCTION__);
+ return A_OK;
+ }
+
+ bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
+ if (bss != NULL) {
+ /*
+ * Free up the node. Not the most efficient process given
+ * we are about to allocate a new node but it is simple and should be
+ * adequate.
+ */
+ wlan_node_reclaim(&wmip->wmi_scan_table, bss);
+ }
+
+ bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
+ if (bss == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ bss->ni_snr = bih->snr;
+ bss->ni_rssi = bih->rssi;
+ A_ASSERT(bss->ni_buf != NULL);
+ A_MEMCPY(bss->ni_buf, buf, len);
+
+ if (wlan_parse_beacon(bss->ni_buf, len, &bss->ni_cie) != A_OK) {
+ wlan_node_free(bss);
+ return A_EINVAL;
+ }
+
+ /*
+ * Update the frequency in ie_chan, overwriting of channel number
+ * which is done in wlan_parse_beacon
+ */
+ bss->ni_cie.ie_chan = bih->channel;
+ wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ bss_t *bss;
+ WMI_OPT_RX_INFO_HDR *bih;
+ A_UINT8 *buf;
+
+ if (len <= sizeof(WMI_OPT_RX_INFO_HDR)) {
+ return A_EINVAL;
+ }
+
+ bih = (WMI_OPT_RX_INFO_HDR *)datap;
+ buf = datap + sizeof(WMI_OPT_RX_INFO_HDR);
+ len -= sizeof(WMI_OPT_RX_INFO_HDR);
+
+ A_DPRINTF(DBG_WMI2, (DBGFMT "opt frame event %2.2x:%2.2x\n", DBGARG,
+ bih->bssid[4], bih->bssid[5]));
+
+ bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid);
+ if (bss != NULL) {
+ /*
+ * Free up the node. Not the most efficient process given
+ * we are about to allocate a new node but it is simple and should be
+ * adequate.
+ */
+ wlan_node_reclaim(&wmip->wmi_scan_table, bss);
+ }
+
+ bss = wlan_node_alloc(&wmip->wmi_scan_table, len);
+ if (bss == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ bss->ni_snr = bih->snr;
+ bss->ni_cie.ie_chan = bih->channel;
+ A_ASSERT(bss->ni_buf != NULL);
+ A_MEMCPY(bss->ni_buf, buf, len);
+ wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid);
+
+ return A_OK;
+}
+
+ /* This event indicates inactivity timeout of a fatpipe(pstream)
+ * at the target
+ */
+static A_STATUS
+wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_PSTREAM_TIMEOUT_EVENT *ev;
+
+ if (len < sizeof(WMI_PSTREAM_TIMEOUT_EVENT)) {
+ return A_EINVAL;
+ }
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "wmi_pstream_timeout_event_rx\n", DBGARG));
+
+ ev = (WMI_PSTREAM_TIMEOUT_EVENT *)datap;
+
+ /* When the pstream (fat pipe == AC) timesout, it means there were no
+ * thinStreams within this pstream & it got implicitly created due to
+ * data flow on this AC. We start the inactivity timer only for
+ * implicitly created pstream. Just reset the host state.
+ */
+ /* Set the activeTsids for this AC to 0 */
+ LOCK_WMI(wmip);
+ wmip->wmi_streamExistsForAC[ev->trafficClass]=0;
+ wmip->wmi_fatPipeExists &= ~(1 << ev->trafficClass);
+ UNLOCK_WMI(wmip);
+
+ /*Indicate inactivity to driver layer for this fatpipe (pstream)*/
+ A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, ev->trafficClass);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_BIT_RATE_CMD *reply;
+ A_INT32 rate;
+
+ if (len < sizeof(WMI_BIT_RATE_CMD)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_BIT_RATE_CMD *)datap;
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Enter - rateindex %d\n", DBGARG, reply->rateIndex));
+
+ if (reply->rateIndex == RATE_AUTO) {
+ rate = RATE_AUTO;
+ } else {
+ rate = wmi_rateTable[(A_UINT32) reply->rateIndex];
+ }
+
+ A_WMI_BITRATE_RX(wmip->wmi_devt, rate);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_FIX_RATES_CMD *reply;
+
+ if (len < sizeof(WMI_BIT_RATE_CMD)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_FIX_RATES_CMD *)datap;
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Enter - fixed rate mask %x\n", DBGARG, reply->fixRateMask));
+
+ A_WMI_RATEMASK_RX(wmip->wmi_devt, reply->fixRateMask);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_CHANNEL_LIST_REPLY *reply;
+
+ if (len < sizeof(WMI_CHANNEL_LIST_REPLY)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_CHANNEL_LIST_REPLY *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_CHANNELLIST_RX(wmip->wmi_devt, reply->numChannels,
+ reply->channelList);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_TX_PWR_REPLY *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_TX_PWR_REPLY *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_TXPWR_RX(wmip->wmi_devt, reply->dbM);
+
+ return A_OK;
+}
+static A_STATUS
+wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_GET_KEEPALIVE_CMD *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_GET_KEEPALIVE_CMD *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_KEEPALIVE_RX(wmip->wmi_devt, reply->configured);
+
+ return A_OK;
+}
+
+
+static A_STATUS
+wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMIX_DSETOPENREQ_EVENT *dsetopenreq;
+
+ if (len < sizeof(WMIX_DSETOPENREQ_EVENT)) {
+ return A_EINVAL;
+ }
+ dsetopenreq = (WMIX_DSETOPENREQ_EVENT *)datap;
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Enter - dset_id=0x%x\n", DBGARG, dsetopenreq->dset_id));
+ A_WMI_DSET_OPEN_REQ(wmip->wmi_devt,
+ dsetopenreq->dset_id,
+ dsetopenreq->targ_dset_handle,
+ dsetopenreq->targ_reply_fn,
+ dsetopenreq->targ_reply_arg);
+
+ return A_OK;
+}
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+static A_STATUS
+wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMIX_DSETCLOSE_EVENT *dsetclose;
+
+ if (len < sizeof(WMIX_DSETCLOSE_EVENT)) {
+ return A_EINVAL;
+ }
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ dsetclose = (WMIX_DSETCLOSE_EVENT *)datap;
+ A_WMI_DSET_CLOSE(wmip->wmi_devt, dsetclose->access_cookie);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMIX_DSETDATAREQ_EVENT *dsetdatareq;
+
+ if (len < sizeof(WMIX_DSETDATAREQ_EVENT)) {
+ return A_EINVAL;
+ }
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ dsetdatareq = (WMIX_DSETDATAREQ_EVENT *)datap;
+ A_WMI_DSET_DATA_REQ(wmip->wmi_devt,
+ dsetdatareq->access_cookie,
+ dsetdatareq->offset,
+ dsetdatareq->length,
+ dsetdatareq->targ_buf,
+ dsetdatareq->targ_reply_fn,
+ dsetdatareq->targ_reply_arg);
+
+ return A_OK;
+}
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+static A_STATUS
+wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_SCAN_COMPLETE_EVENT *ev;
+
+ ev = (WMI_SCAN_COMPLETE_EVENT *)datap;
+ A_WMI_SCANCOMPLETE_EVENT(wmip->wmi_devt, ev->status);
+
+ return A_OK;
+}
+
+/*
+ * Target is reporting a programming error. This is for
+ * developer aid only. Target only checks a few common violations
+ * and it is responsibility of host to do all error checking.
+ * Behavior of target after wmi error event is undefined.
+ * A reset is recommended.
+ */
+static A_STATUS
+wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_CMD_ERROR_EVENT *ev;
+
+ ev = (WMI_CMD_ERROR_EVENT *)datap;
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Programming Error: cmd=%d ", ev->commandId));
+ switch (ev->errorCode) {
+ case (INVALID_PARAM):
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal Parameter\n"));
+ break;
+ case (ILLEGAL_STATE):
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal State\n"));
+ break;
+ case (INTERNAL_ERROR):
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Internal Error\n"));
+ break;
+ }
+
+ return A_OK;
+}
+
+
+static A_STATUS
+wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_TARGET_STATS *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_TARGET_STATS *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_TARGETSTATS_EVENT(wmip->wmi_devt, reply);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_RSSI_THRESHOLD_EVENT *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_RSSI_THRESHOLD_EVENT *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_RSSI_THRESHOLD_EVENT(wmip->wmi_devt, reply->range, reply->rssi);
+
+ return A_OK;
+}
+
+
+static A_STATUS
+wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_TARGET_ERROR_REPORT_EVENT *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_TARGET_ERROR_REPORT_EVENT *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_REPORT_ERROR_EVENT(wmip->wmi_devt, reply->errorVal);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_CAC_EVENT *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_CAC_EVENT *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_CAC_EVENT(wmip->wmi_devt, reply->ac,
+ reply->cac_indication, reply->statusCode,
+ reply->tspecSuggestion);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMIX_HB_CHALLENGE_RESP_EVENT *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMIX_HB_CHALLENGE_RESP_EVENT *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "wmi: challenge response event\n", DBGARG));
+
+ A_WMI_HBCHALLENGERESP_EVENT(wmip->wmi_devt, reply->cookie, reply->source);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_TARGET_ROAM_TBL *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_TARGET_ROAM_TBL *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_ROAM_TABLE_EVENT(wmip->wmi_devt, reply);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_TARGET_ROAM_DATA *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_TARGET_ROAM_DATA *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_ROAM_DATA_EVENT(wmip->wmi_devt, reply);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_TX_RETRY_ERR_EVENT *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_TX_RETRY_ERR_EVENT *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_TX_RETRY_ERR_EVENT(wmip->wmi_devt);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_SNR_THRESHOLD_EVENT *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_SNR_THRESHOLD_EVENT *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_SNR_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->snr);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_LQ_THRESHOLD_EVENT *reply;
+
+ if (len < sizeof(*reply)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_LQ_THRESHOLD_EVENT *)datap;
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_LQ_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->lq);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ A_UINT16 ap_info_entry_size;
+ WMI_APLIST_EVENT *ev = (WMI_APLIST_EVENT *)datap;
+ WMI_AP_INFO_V1 *ap_info_v1;
+ A_UINT8 i;
+
+ if (len < sizeof(WMI_APLIST_EVENT)) {
+ return A_EINVAL;
+ }
+
+ if (ev->apListVer == APLIST_VER1) {
+ ap_info_entry_size = sizeof(WMI_AP_INFO_V1);
+ ap_info_v1 = (WMI_AP_INFO_V1 *)ev->apList;
+ } else {
+ return A_EINVAL;
+ }
+
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Number of APs in APLIST Event is %d\n", ev->numAP));
+ if (len < (int)(sizeof(WMI_APLIST_EVENT) +
+ (ev->numAP - 1) * ap_info_entry_size))
+ {
+ return A_EINVAL;
+ }
+
+ /*
+ * AP List Ver1 Contents
+ */
+ for (i = 0; i < ev->numAP; i++) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("AP#%d BSSID %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x "\
+ "Channel %d\n", i,
+ ap_info_v1->bssid[0], ap_info_v1->bssid[1],
+ ap_info_v1->bssid[2], ap_info_v1->bssid[3],
+ ap_info_v1->bssid[4], ap_info_v1->bssid[5],
+ ap_info_v1->channel));
+ ap_info_v1++;
+ }
+ return A_OK;
+}
+
+static A_STATUS
+wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ A_UINT32 dropped;
+
+ dropped = *((A_UINT32 *)datap);
+ datap += sizeof(dropped);
+ len -= sizeof(dropped);
+ A_WMI_DBGLOG_EVENT(wmip->wmi_devt, dropped, datap, len);
+ return A_OK;
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+static A_STATUS
+wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMIX_GPIO_INTR_EVENT *gpio_intr = (WMIX_GPIO_INTR_EVENT *)datap;
+
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Enter - intrmask=0x%x input=0x%x.\n", DBGARG,
+ gpio_intr->intr_mask, gpio_intr->input_values));
+
+ A_WMI_GPIO_INTR_RX(gpio_intr->intr_mask, gpio_intr->input_values);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMIX_GPIO_DATA_EVENT *gpio_data = (WMIX_GPIO_DATA_EVENT *)datap;
+
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG,
+ gpio_data->reg_id, gpio_data->value));
+
+ A_WMI_GPIO_DATA_RX(gpio_data->reg_id, gpio_data->value);
+
+ return A_OK;
+}
+
+static A_STATUS
+wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_GPIO_ACK_RX();
+
+ return A_OK;
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+/*
+ * Called to send a wmi command. Command specific data is already built
+ * on osbuf and current osbuf->data points to it.
+ */
+A_STATUS
+wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+ WMI_SYNC_FLAG syncflag)
+{
+#define IS_LONG_CMD(cmdId) ((cmdId == WMI_OPT_TX_FRAME_CMDID) || (cmdId == WMI_ADD_WOW_PATTERN_CMDID))
+ WMI_CMD_HDR *cHdr;
+ WMI_PRI_STREAM_ID streamID = WMI_CONTROL_PRI;
+
+ A_ASSERT(osbuf != NULL);
+
+ if (syncflag >= END_WMIFLAG) {
+ return A_EINVAL;
+ }
+
+ if ((syncflag == SYNC_BEFORE_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
+ /*
+ * We want to make sure all data currently queued is transmitted before
+ * the cmd execution. Establish a new sync point.
+ */
+ wmi_sync_point(wmip);
+ }
+
+ if (A_NETBUF_PUSH(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) {
+ return A_NO_MEMORY;
+ }
+
+ cHdr = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf);
+ cHdr->commandId = cmdId;
+
+ /*
+ * Send cmd, some via control pipe, others via data pipe
+ */
+ if (IS_LONG_CMD(cmdId)) {
+ wmi_data_hdr_add(wmip, osbuf, CNTL_MSGTYPE);
+ // TODO ... these can now go through the control endpoint via HTC 2.0
+ streamID = WMI_BEST_EFFORT_PRI;
+ }
+ A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID);
+
+ if ((syncflag == SYNC_AFTER_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) {
+ /*
+ * We want to make sure all new data queued waits for the command to
+ * execute. Establish a new sync point.
+ */
+ wmi_sync_point(wmip);
+ }
+ return (A_OK);
+#undef IS_LONG_CMD
+}
+
+A_STATUS
+wmi_cmd_send_xtnd(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId,
+ WMI_SYNC_FLAG syncflag)
+{
+ WMIX_CMD_HDR *cHdr;
+
+ if (A_NETBUF_PUSH(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) {
+ return A_NO_MEMORY;
+ }
+
+ cHdr = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf);
+ cHdr->commandId = cmdId;
+
+ return wmi_cmd_send(wmip, osbuf, WMI_EXTENSION_CMDID, syncflag);
+}
+
+A_STATUS
+wmi_connect_cmd(struct wmi_t *wmip, NETWORK_TYPE netType,
+ DOT11_AUTH_MODE dot11AuthMode, AUTH_MODE authMode,
+ CRYPTO_TYPE pairwiseCrypto, A_UINT8 pairwiseCryptoLen,
+ CRYPTO_TYPE groupCrypto,A_UINT8 groupCryptoLen,
+ int ssidLength, A_UCHAR *ssid,
+ A_UINT8 *bssid, A_UINT16 channel, A_UINT32 ctrl_flags)
+{
+ void *osbuf;
+ WMI_CONNECT_CMD *cc;
+
+ if ((pairwiseCrypto == NONE_CRYPT) && (groupCrypto != NONE_CRYPT)) {
+ return A_EINVAL;
+ }
+ if ((pairwiseCrypto != NONE_CRYPT) && (groupCrypto == NONE_CRYPT)) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(WMI_CONNECT_CMD));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(WMI_CONNECT_CMD));
+
+ cc = (WMI_CONNECT_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cc, sizeof(*cc));
+
+ A_MEMCPY(cc->ssid, ssid, ssidLength);
+ cc->ssidLength = ssidLength;
+ cc->networkType = netType;
+ cc->dot11AuthMode = dot11AuthMode;
+ cc->authMode = authMode;
+ cc->pairwiseCryptoType = pairwiseCrypto;
+ cc->pairwiseCryptoLen = pairwiseCryptoLen;
+ cc->groupCryptoType = groupCrypto;
+ cc->groupCryptoLen = groupCryptoLen;
+ cc->channel = channel;
+ cc->ctrl_flags = ctrl_flags;
+
+ if (bssid != NULL) {
+ A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
+ }
+ if (wmi_set_keepalive_cmd(wmip, wmip->wmi_keepaliveInterval) != A_OK) {
+ return(A_ERROR);
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_CONNECT_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_reconnect_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT16 channel)
+{
+ void *osbuf;
+ WMI_RECONNECT_CMD *cc;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(WMI_RECONNECT_CMD));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(WMI_RECONNECT_CMD));
+
+ cc = (WMI_RECONNECT_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cc, sizeof(*cc));
+
+ cc->channel = channel;
+
+ if (bssid != NULL) {
+ A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN);
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_RECONNECT_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_disconnect_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+ A_STATUS status;
+
+ osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ /* Bug fix for 24817(elevator bug) - the disconnect command does not
+ need to do a SYNC before.*/
+ status = (wmi_cmd_send(wmip, osbuf, WMI_DISCONNECT_CMDID,
+ NO_SYNC_WMIFLAG));
+
+ return status;
+}
+
+A_STATUS
+wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType,
+ A_BOOL forceFgScan, A_BOOL isLegacy,
+ A_UINT32 homeDwellTime, A_UINT32 forceScanInterval)
+{
+ void *osbuf;
+ WMI_START_SCAN_CMD *sc;
+
+ if ((scanType != WMI_LONG_SCAN) && (scanType != WMI_SHORT_SCAN)) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*sc));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*sc));
+
+ sc = (WMI_START_SCAN_CMD *)(A_NETBUF_DATA(osbuf));
+ sc->scanType = scanType;
+ sc->forceFgScan = forceFgScan;
+ sc->isLegacy = isLegacy;
+ sc->homeDwellTime = homeDwellTime;
+ sc->forceScanInterval = forceScanInterval;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_START_SCAN_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec,
+ A_UINT16 fg_end_sec, A_UINT16 bg_sec,
+ A_UINT16 minact_chdw_msec, A_UINT16 maxact_chdw_msec,
+ A_UINT16 pas_chdw_msec,
+ A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags,
+ A_UINT32 max_dfsch_act_time)
+{
+ void *osbuf;
+ WMI_SCAN_PARAMS_CMD *sc;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*sc));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*sc));
+
+ sc = (WMI_SCAN_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(sc, sizeof(*sc));
+ sc->fg_start_period = fg_start_sec;
+ sc->fg_end_period = fg_end_sec;
+ sc->bg_period = bg_sec;
+ sc->minact_chdwell_time = minact_chdw_msec;
+ sc->maxact_chdwell_time = maxact_chdw_msec;
+ sc->pas_chdwell_time = pas_chdw_msec;
+ sc->shortScanRatio = shScanRatio;
+ sc->scanCtrlFlags = scanCtrlFlags;
+ sc->max_dfsch_act_time = max_dfsch_act_time;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_SCAN_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask)
+{
+ void *osbuf;
+ WMI_BSS_FILTER_CMD *cmd;
+
+ if (filter >= LAST_BSS_FILTER) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_BSS_FILTER_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->bssFilter = filter;
+ cmd->ieMask = ieMask;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BSS_FILTER_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag,
+ A_UINT8 ssidLength, A_UCHAR *ssid)
+{
+ void *osbuf;
+ WMI_PROBED_SSID_CMD *cmd;
+
+ if (index > MAX_PROBED_SSID_INDEX) {
+ return A_EINVAL;
+ }
+ if (ssidLength > sizeof(cmd->ssid)) {
+ return A_EINVAL;
+ }
+ if ((flag & (DISABLE_SSID_FLAG | ANY_SSID_FLAG)) && (ssidLength > 0)) {
+ return A_EINVAL;
+ }
+ if ((flag & SPECIFIC_SSID_FLAG) && !ssidLength) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_PROBED_SSID_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->entryIndex = index;
+ cmd->flag = flag;
+ cmd->ssidLength = ssidLength;
+ A_MEMCPY(cmd->ssid, ssid, ssidLength);
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_PROBED_SSID_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons)
+{
+ void *osbuf;
+ WMI_LISTEN_INT_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_LISTEN_INT_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->listenInterval = listenInterval;
+ cmd->numBeacons = listenBeacons;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_LISTEN_INT_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmissTime, A_UINT16 bmissBeacons)
+{
+ void *osbuf;
+ WMI_BMISS_TIME_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_BMISS_TIME_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->bmissTime = bmissTime;
+ cmd->numBeacons = bmissBeacons;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BMISS_TIME_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType,
+ A_UINT8 ieLen, A_UINT8 *ieInfo)
+{
+ void *osbuf;
+ WMI_SET_ASSOC_INFO_CMD *cmd;
+ A_UINT16 cmdLen;
+
+ cmdLen = sizeof(*cmd) + ieLen - 1;
+ osbuf = A_NETBUF_ALLOC(cmdLen);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, cmdLen);
+
+ cmd = (WMI_SET_ASSOC_INFO_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, cmdLen);
+ cmd->ieType = ieType;
+ cmd->bufferSize = ieLen;
+ A_MEMCPY(cmd->assocInfo, ieInfo, ieLen);
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_ASSOC_INFO_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode)
+{
+ void *osbuf;
+ WMI_POWER_MODE_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_POWER_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->powerMode = powerMode;
+ wmip->wmi_powerMode = powerMode;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_MODE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl,
+ A_UINT16 atim_windows, A_UINT16 timeout_value)
+{
+ void *osbuf;
+ WMI_IBSS_PM_CAPS_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_IBSS_PM_CAPS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->power_saving = pmEnable;
+ cmd->ttl = ttl;
+ cmd->atim_windows = atim_windows;
+ cmd->timeout_value = timeout_value;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_IBSS_PM_CAPS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod,
+ A_UINT16 psPollNum, A_UINT16 dtimPolicy)
+{
+ void *osbuf;
+ WMI_POWER_PARAMS_CMD *pm;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*pm));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*pm));
+
+ pm = (WMI_POWER_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(pm, sizeof(*pm));
+ pm->idle_period = idlePeriod;
+ pm->pspoll_number = psPollNum;
+ pm->dtim_policy = dtimPolicy;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout)
+{
+ void *osbuf;
+ WMI_DISC_TIMEOUT_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_DISC_TIMEOUT_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->disconnectTimeout = timeout;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_DISC_TIMEOUT_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, CRYPTO_TYPE keyType,
+ A_UINT8 keyUsage, A_UINT8 keyLength, A_UINT8 *keyRSC,
+ A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl,
+ WMI_SYNC_FLAG sync_flag)
+{
+ void *osbuf;
+ WMI_ADD_CIPHER_KEY_CMD *cmd;
+
+ if ((keyIndex > WMI_MAX_KEY_INDEX) || (keyLength > WMI_MAX_KEY_LEN) ||
+ (keyMaterial == NULL))
+ {
+ return A_EINVAL;
+ }
+
+ if ((WEP_CRYPT != keyType) && (NULL == keyRSC)) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_ADD_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->keyIndex = keyIndex;
+ cmd->keyType = keyType;
+ cmd->keyUsage = keyUsage;
+ cmd->keyLength = keyLength;
+ A_MEMCPY(cmd->key, keyMaterial, keyLength);
+ if (NULL != keyRSC) {
+ A_MEMCPY(cmd->keyRSC, keyRSC, sizeof(cmd->keyRSC));
+ }
+ cmd->key_op_ctrl = key_op_ctrl;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_ADD_CIPHER_KEY_CMDID, sync_flag));
+}
+
+A_STATUS
+wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk)
+{
+ void *osbuf;
+ WMI_ADD_KRK_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_ADD_KRK_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ A_MEMCPY(cmd->krk, krk, WMI_KRK_LEN);
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_ADD_KRK_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_delete_krk_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(0);
+
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_KRK_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex)
+{
+ void *osbuf;
+ WMI_DELETE_CIPHER_KEY_CMD *cmd;
+
+ if (keyIndex > WMI_MAX_KEY_INDEX) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_DELETE_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->keyIndex = keyIndex;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_CIPHER_KEY_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId,
+ A_BOOL set)
+{
+ void *osbuf;
+ WMI_SET_PMKID_CMD *cmd;
+
+ if (bssid == NULL) {
+ return A_EINVAL;
+ }
+
+ if ((set == TRUE) && (pmkId == NULL)) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_PMKID_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+ if (set == TRUE) {
+ A_MEMCPY(cmd->pmkid, pmkId, sizeof(cmd->pmkid));
+ cmd->enable = PMKID_ENABLE;
+ } else {
+ A_MEMZERO(cmd->pmkid, sizeof(cmd->pmkid));
+ cmd->enable = PMKID_DISABLE;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en)
+{
+ void *osbuf;
+ WMI_SET_TKIP_COUNTERMEASURES_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_TKIP_COUNTERMEASURES_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->cm_en = (en == TRUE)? WMI_TKIP_CM_ENABLE : WMI_TKIP_CM_DISABLE;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_TKIP_COUNTERMEASURES_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_akmp_params_cmd(struct wmi_t *wmip,
+ WMI_SET_AKMP_PARAMS_CMD *akmpParams)
+{
+ void *osbuf;
+ WMI_SET_AKMP_PARAMS_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+ cmd = (WMI_SET_AKMP_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->akmpInfo = akmpParams->akmpInfo;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_AKMP_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_pmkid_list_cmd(struct wmi_t *wmip,
+ WMI_SET_PMKID_LIST_CMD *pmkInfo)
+{
+ void *osbuf;
+ WMI_SET_PMKID_LIST_CMD *cmd;
+ A_UINT16 cmdLen;
+ A_UINT8 i;
+
+ cmdLen = sizeof(pmkInfo->numPMKID) +
+ pmkInfo->numPMKID * sizeof(WMI_PMKID);
+
+ osbuf = A_NETBUF_ALLOC(cmdLen);
+
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, cmdLen);
+ cmd = (WMI_SET_PMKID_LIST_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->numPMKID = pmkInfo->numPMKID;
+
+ for (i = 0; i < cmd->numPMKID; i++) {
+ A_MEMCPY(&cmd->pmkidList[i], &pmkInfo->pmkidList[i],
+ WMI_PMKID_LEN);
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_LIST_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_pmkid_list_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_PMKID_LIST_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_dataSync_send(struct wmi_t *wmip, void *osbuf, WMI_PRI_STREAM_ID streamID)
+{
+ WMI_DATA_HDR *dtHdr;
+
+ A_ASSERT(streamID != WMI_CONTROL_PRI);
+ A_ASSERT(osbuf != NULL);
+
+ if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) {
+ return A_NO_MEMORY;
+ }
+
+ dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf);
+ dtHdr->info =
+ (SYNC_MSGTYPE & WMI_DATA_HDR_MSG_TYPE_MASK) << WMI_DATA_HDR_MSG_TYPE_SHIFT;
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter - streamID %d\n", DBGARG, streamID));
+
+ return (A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID));
+}
+
+typedef struct _WMI_DATA_SYNC_BUFS {
+ A_UINT8 trafficClass;
+ void *osbuf;
+}WMI_DATA_SYNC_BUFS;
+
+static A_STATUS
+wmi_sync_point(struct wmi_t *wmip)
+{
+ void *cmd_osbuf;
+ WMI_DATA_SYNC_BUFS dataSyncBufs[WMM_NUM_AC];
+ A_UINT8 i,numPriStreams=0;
+ A_STATUS status;
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ memset(dataSyncBufs,0,sizeof(dataSyncBufs));
+
+ /* lock out while we walk through the priority list and assemble our local array */
+ LOCK_WMI(wmip);
+
+ for (i=0; i < WMM_NUM_AC ; i++) {
+ if (wmip->wmi_fatPipeExists & (1 << i)) {
+ numPriStreams++;
+ dataSyncBufs[numPriStreams-1].trafficClass = i;
+ }
+ }
+
+ UNLOCK_WMI(wmip);
+
+ /* dataSyncBufs is now filled with entries (starting at index 0) containing valid streamIDs */
+
+ do {
+ /*
+ * We allocate all network buffers needed so we will be able to
+ * send all required frames.
+ */
+ cmd_osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (cmd_osbuf == NULL) {
+ status = A_NO_MEMORY;
+ break;
+ }
+
+ for (i=0; i < numPriStreams ; i++) {
+ dataSyncBufs[i].osbuf = A_NETBUF_ALLOC(0);
+ if (dataSyncBufs[i].osbuf == NULL) {
+ status = A_NO_MEMORY;
+ break;
+ }
+ } //end for
+
+ /*
+ * Send sync cmd followed by sync data messages on all endpoints being
+ * used
+ */
+ status = wmi_cmd_send(wmip, cmd_osbuf, WMI_SYNCHRONIZE_CMDID,
+ NO_SYNC_WMIFLAG);
+
+ if (A_FAILED(status)) {
+ break;
+ }
+ /* cmd buffer sent, we no longer own it */
+ cmd_osbuf = NULL;
+
+ for(i=0; i < numPriStreams; i++) {
+ A_ASSERT(dataSyncBufs[i].osbuf != NULL);
+
+ status = wmi_dataSync_send(wmip, dataSyncBufs[i].osbuf,
+ WMI_ACCESSCATEGORY_WMISTREAM(wmip,dataSyncBufs[i].trafficClass));
+
+ if (A_FAILED(status)) {
+ break;
+ }
+ /* we don't own this buffer anymore, NULL it out of the array so it
+ * won't get cleaned up */
+ dataSyncBufs[i].osbuf = NULL;
+ } //end for
+
+ } while(FALSE);
+
+ /* free up any resources left over (possibly due to an error) */
+
+ if (cmd_osbuf != NULL) {
+ A_NETBUF_FREE(cmd_osbuf);
+ }
+
+ for (i = 0; i < numPriStreams; i++) {
+ if (dataSyncBufs[i].osbuf != NULL) {
+ A_NETBUF_FREE(dataSyncBufs[i].osbuf);
+ }
+ }
+
+ return (status);
+}
+
+A_STATUS
+wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *params)
+{
+ void *osbuf;
+ WMI_CREATE_PSTREAM_CMD *cmd;
+ A_UINT16 activeTsids=0;
+ A_UINT8 fatPipeExistsForAC=0;
+
+ /* Validate all the parameters. */
+ if( !((params->userPriority < 8) &&
+ (params->userPriority <= 0x7) &&
+ (convert_userPriority_to_trafficClass(params->userPriority) == params->trafficClass) &&
+ (params->trafficDirection == UPLINK_TRAFFIC ||
+ params->trafficDirection == DNLINK_TRAFFIC ||
+ params->trafficDirection == BIDIR_TRAFFIC) &&
+ (params->trafficType == TRAFFIC_TYPE_APERIODIC ||
+ params->trafficType == TRAFFIC_TYPE_PERIODIC ) &&
+ (params->voicePSCapability == DISABLE_FOR_THIS_AC ||
+ params->voicePSCapability == ENABLE_FOR_THIS_AC ||
+ params->voicePSCapability == ENABLE_FOR_ALL_AC) &&
+ (params->tsid == WMI_IMPLICIT_PSTREAM || params->tsid <= WMI_MAX_THINSTREAM)) )
+ {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Sending create_pstream_cmd: ac=%d tsid:%d\n", DBGARG,
+ params->trafficClass, params->tsid));
+
+ cmd = (WMI_CREATE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ A_MEMCPY(cmd, params, sizeof(*cmd));
+
+ /* this is an implicitly created Fat pipe */
+ if (params->tsid == WMI_IMPLICIT_PSTREAM) {
+ LOCK_WMI(wmip);
+ fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
+ wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
+ UNLOCK_WMI(wmip);
+ } else {
+ /* this is an explicitly created thin stream within a fat pipe */
+ LOCK_WMI(wmip);
+ fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass));
+ activeTsids = wmip->wmi_streamExistsForAC[params->trafficClass];
+ wmip->wmi_streamExistsForAC[params->trafficClass] |= (1<<params->tsid);
+ /* if a thinstream becomes active, the fat pipe automatically
+ * becomes active
+ */
+ wmip->wmi_fatPipeExists |= (1<<params->trafficClass);
+ UNLOCK_WMI(wmip);
+ }
+
+ /* Indicate activty change to driver layer only if this is the
+ * first TSID to get created in this AC explicitly or an implicit
+ * fat pipe is getting created.
+ */
+ if (!fatPipeExistsForAC) {
+ A_WMI_STREAM_TX_ACTIVE(wmip->wmi_devt, params->trafficClass);
+ }
+
+ /* mike: should be SYNC_BEFORE_WMIFLAG */
+ return (wmi_cmd_send(wmip, osbuf, WMI_CREATE_PSTREAM_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 tsid)
+{
+ void *osbuf;
+ WMI_DELETE_PSTREAM_CMD *cmd;
+ A_STATUS status;
+ A_UINT16 activeTsids=0;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_DELETE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+
+ cmd->trafficClass = trafficClass;
+ cmd->tsid = tsid;
+
+ LOCK_WMI(wmip);
+ activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+ UNLOCK_WMI(wmip);
+
+ /* Check if the tsid was created & exists */
+ if (!(activeTsids & (1<<tsid))) {
+
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "TSID %d does'nt exist for trafficClass: %d\n", DBGARG, tsid, trafficClass));
+ /* TODO: return a more appropriate err code */
+ return A_ERROR;
+ }
+
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Sending delete_pstream_cmd: trafficClass: %d tsid=%d\n", DBGARG, trafficClass, tsid));
+
+ status = (wmi_cmd_send(wmip, osbuf, WMI_DELETE_PSTREAM_CMDID,
+ SYNC_BEFORE_WMIFLAG));
+
+ LOCK_WMI(wmip);
+ wmip->wmi_streamExistsForAC[trafficClass] &= ~(1<<tsid);
+ activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+ UNLOCK_WMI(wmip);
+
+
+ /* Indicate stream inactivity to driver layer only if all tsids
+ * within this AC are deleted.
+ */
+ if(!activeTsids) {
+ A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, trafficClass);
+ wmip->wmi_fatPipeExists &= ~(1<<trafficClass);
+ }
+
+ return status;
+}
+
+/*
+ * used to set the bit rate. rate is in Kbps. If rate == -1
+ * then auto selection is used.
+ */
+A_STATUS
+wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate)
+{
+ void *osbuf;
+ WMI_BIT_RATE_CMD *cmd;
+ A_INT8 index;
+
+ if (rate != -1) {
+ index = wmi_validate_bitrate(wmip, rate);
+ if(index == A_EINVAL){
+ return A_EINVAL;
+ }
+ } else {
+ index = -1;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_BIT_RATE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+
+ cmd->rateIndex = index;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_bitrate_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_BITRATE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+/*
+ * Returns TRUE iff the given rate index is legal in the current PHY mode.
+ */
+A_BOOL
+wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex)
+{
+ WMI_PHY_MODE phyMode = wmip->wmi_phyMode;
+ A_BOOL isValid = TRUE;
+ switch(phyMode) {
+ case WMI_11A_MODE:
+ if ((rateIndex < MODE_A_SUPPORT_RATE_START) || (rateIndex > MODE_A_SUPPORT_RATE_STOP)) {
+ isValid = FALSE;
+ }
+ break;
+
+ case WMI_11B_MODE:
+ if ((rateIndex < MODE_B_SUPPORT_RATE_START) || (rateIndex > MODE_B_SUPPORT_RATE_STOP)) {
+ isValid = FALSE;
+ }
+ break;
+
+ case WMI_11GONLY_MODE:
+ if ((rateIndex < MODE_GONLY_SUPPORT_RATE_START) || (rateIndex > MODE_GONLY_SUPPORT_RATE_STOP)) {
+ isValid = FALSE;
+ }
+ break;
+
+ case WMI_11G_MODE:
+ case WMI_11AG_MODE:
+ if ((rateIndex < MODE_G_SUPPORT_RATE_START) || (rateIndex > MODE_G_SUPPORT_RATE_STOP)) {
+ isValid = FALSE;
+ }
+ break;
+
+ default:
+ A_ASSERT(FALSE);
+ break;
+ }
+
+ return isValid;
+}
+
+A_INT8
+wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate)
+{
+ A_INT8 i;
+ if (rate != -1)
+ {
+ for (i=0;;i++)
+ {
+ if (wmi_rateTable[(A_UINT32) i] == 0) {
+ return A_EINVAL;
+ }
+ if (wmi_rateTable[(A_UINT32) i] == rate) {
+ break;
+ }
+ }
+ }
+ else{
+ i = -1;
+ }
+
+ if(wmi_is_bitrate_index_valid(wmip, i) != TRUE) {
+ return A_EINVAL;
+ }
+
+ return i;
+}
+
+A_STATUS
+wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask)
+{
+ void *osbuf;
+ WMI_FIX_RATES_CMD *cmd;
+ A_UINT32 rateIndex;
+
+ /* Make sure all rates in the mask are valid in the current PHY mode */
+ for(rateIndex = 0; rateIndex < MAX_NUMBER_OF_SUPPORT_RATES; rateIndex++) {
+ if((1 << rateIndex) & (A_UINT32)fixRatesMask) {
+ if(wmi_is_bitrate_index_valid(wmip, rateIndex) != TRUE) {
+ A_DPRINTF(DBG_WMI, (DBGFMT "Set Fix Rates command failed: Given rate is illegal in current PHY mode\n", DBGARG));
+ return A_EINVAL;
+ }
+ }
+ }
+
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_FIX_RATES_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+
+ cmd->fixRateMask = fixRatesMask;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_ratemask_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_FIXRATES_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_channelList_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_CHANNEL_LIST_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+/*
+ * used to generate a wmi sey channel Parameters cmd.
+ * mode should always be specified and corresponds to the phy mode of the
+ * wlan.
+ * numChan should alway sbe specified. If zero indicates that all available
+ * channels should be used.
+ * channelList is an array of channel frequencies (in Mhz) which the radio
+ * should limit its operation to. It should be NULL if numChan == 0. Size of
+ * array should correspond to numChan entries.
+ */
+A_STATUS
+wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam,
+ WMI_PHY_MODE mode, A_INT8 numChan,
+ A_UINT16 *channelList)
+{
+ void *osbuf;
+ WMI_CHANNEL_PARAMS_CMD *cmd;
+ A_INT8 size;
+
+ size = sizeof (*cmd);
+
+ if (numChan) {
+ if (numChan > WMI_MAX_CHANNELS) {
+ return A_EINVAL;
+ }
+ size += sizeof(A_UINT16) * (numChan - 1);
+ }
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_CHANNEL_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+
+ wmip->wmi_phyMode = mode;
+ cmd->scanParam = scanParam;
+ cmd->phyMode = mode;
+ cmd->numChannels = numChan;
+ A_MEMCPY(cmd->channelList, channelList, numChan * sizeof(A_UINT16));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_CHANNEL_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_rssi_threshold_params(struct wmi_t *wmip,
+ WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_RSSI_THRESHOLD_PARAMS_CMD *cmd;
+ /* These values are in ascending order */
+ if( rssiCmd->thresholdAbove6_Val <= rssiCmd->thresholdAbove5_Val ||
+ rssiCmd->thresholdAbove5_Val <= rssiCmd->thresholdAbove4_Val ||
+ rssiCmd->thresholdAbove4_Val <= rssiCmd->thresholdAbove3_Val ||
+ rssiCmd->thresholdAbove3_Val <= rssiCmd->thresholdAbove2_Val ||
+ rssiCmd->thresholdAbove2_Val <= rssiCmd->thresholdAbove1_Val ||
+ rssiCmd->thresholdBelow6_Val <= rssiCmd->thresholdBelow5_Val ||
+ rssiCmd->thresholdBelow5_Val <= rssiCmd->thresholdBelow4_Val ||
+ rssiCmd->thresholdBelow4_Val <= rssiCmd->thresholdBelow3_Val ||
+ rssiCmd->thresholdBelow3_Val <= rssiCmd->thresholdBelow2_Val ||
+ rssiCmd->thresholdBelow2_Val <= rssiCmd->thresholdBelow1_Val) {
+
+ return A_EINVAL;
+ }
+
+ size = sizeof (*cmd);
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_RSSI_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+ A_MEMCPY(cmd, rssiCmd, sizeof(WMI_RSSI_THRESHOLD_PARAMS_CMD));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_RSSI_THRESHOLD_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip,
+ WMI_SET_HOST_SLEEP_MODE_CMD *hostModeCmd)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_SET_HOST_SLEEP_MODE_CMD *cmd;
+
+ if( hostModeCmd->awake == hostModeCmd->asleep) {
+ return A_EINVAL;
+ }
+
+ size = sizeof (*cmd);
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_SET_HOST_SLEEP_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+ A_MEMCPY(cmd, hostModeCmd, sizeof(WMI_SET_HOST_SLEEP_MODE_CMD));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_HOST_SLEEP_MODE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_wow_mode_cmd(struct wmi_t *wmip,
+ WMI_SET_WOW_MODE_CMD *wowModeCmd)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_SET_WOW_MODE_CMD *cmd;
+
+ size = sizeof (*cmd);
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_SET_WOW_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+ A_MEMCPY(cmd, wowModeCmd, sizeof(WMI_SET_WOW_MODE_CMD));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WOW_MODE_CMDID,
+ NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_get_wow_list_cmd(struct wmi_t *wmip,
+ WMI_GET_WOW_LIST_CMD *wowListCmd)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_GET_WOW_LIST_CMD *cmd;
+
+ size = sizeof (*cmd);
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_GET_WOW_LIST_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+ A_MEMCPY(cmd, wowListCmd, sizeof(WMI_GET_WOW_LIST_CMD));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_WOW_LIST_CMDID,
+ NO_SYNC_WMIFLAG));
+
+}
+
+static A_STATUS
+wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+ WMI_GET_WOW_LIST_REPLY *reply;
+
+ if (len < sizeof(WMI_GET_WOW_LIST_REPLY)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_GET_WOW_LIST_REPLY *)datap;
+
+ A_WMI_WOW_LIST_EVENT(wmip->wmi_devt, reply->num_filters,
+ reply);
+
+ return A_OK;
+}
+
+A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip,
+ WMI_ADD_WOW_PATTERN_CMD *addWowCmd,
+ A_UINT8* pattern, A_UINT8* mask,
+ A_UINT8 pattern_size)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_ADD_WOW_PATTERN_CMD *cmd;
+ A_UINT8 *filter_mask = NULL;
+
+ size = sizeof (*cmd);
+
+ size += ((2 * addWowCmd->filter_size)* sizeof(A_UINT8));
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_ADD_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->filter_list_id = addWowCmd->filter_list_id;
+ cmd->filter_offset = addWowCmd->filter_offset;
+ cmd->filter_size = addWowCmd->filter_size;
+
+ A_MEMCPY(cmd->filter, pattern, addWowCmd->filter_size);
+
+ filter_mask = (A_UINT8*)(cmd->filter + cmd->filter_size);
+ A_MEMCPY(filter_mask, mask, addWowCmd->filter_size);
+
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_ADD_WOW_PATTERN_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_del_wow_pattern_cmd(struct wmi_t *wmip,
+ WMI_DEL_WOW_PATTERN_CMD *delWowCmd)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_DEL_WOW_PATTERN_CMD *cmd;
+
+ size = sizeof (*cmd);
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_DEL_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+ A_MEMCPY(cmd, delWowCmd, sizeof(WMI_DEL_WOW_PATTERN_CMD));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_DEL_WOW_PATTERN_CMDID,
+ NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_set_snr_threshold_params(struct wmi_t *wmip,
+ WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_SNR_THRESHOLD_PARAMS_CMD *cmd;
+ /* These values are in ascending order */
+ if( snrCmd->thresholdAbove4_Val <= snrCmd->thresholdAbove3_Val ||
+ snrCmd->thresholdAbove3_Val <= snrCmd->thresholdAbove2_Val ||
+ snrCmd->thresholdAbove2_Val <= snrCmd->thresholdAbove1_Val ||
+ snrCmd->thresholdBelow4_Val <= snrCmd->thresholdBelow3_Val ||
+ snrCmd->thresholdBelow3_Val <= snrCmd->thresholdBelow2_Val ||
+ snrCmd->thresholdBelow2_Val <= snrCmd->thresholdBelow1_Val) {
+
+ return A_EINVAL;
+ }
+
+ size = sizeof (*cmd);
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_SNR_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+ A_MEMCPY(cmd, snrCmd, sizeof(WMI_SNR_THRESHOLD_PARAMS_CMD));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SNR_THRESHOLD_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_clr_rssi_snr(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(int));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_CLR_RSSI_SNR_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_lq_threshold_params(struct wmi_t *wmip,
+ WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_LQ_THRESHOLD_PARAMS_CMD *cmd;
+ /* These values are in ascending order */
+ if( lqCmd->thresholdAbove4_Val <= lqCmd->thresholdAbove3_Val ||
+ lqCmd->thresholdAbove3_Val <= lqCmd->thresholdAbove2_Val ||
+ lqCmd->thresholdAbove2_Val <= lqCmd->thresholdAbove1_Val ||
+ lqCmd->thresholdBelow4_Val <= lqCmd->thresholdBelow3_Val ||
+ lqCmd->thresholdBelow3_Val <= lqCmd->thresholdBelow2_Val ||
+ lqCmd->thresholdBelow2_Val <= lqCmd->thresholdBelow1_Val ) {
+
+ return A_EINVAL;
+ }
+
+ size = sizeof (*cmd);
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_LQ_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+ A_MEMCPY(cmd, lqCmd, sizeof(WMI_LQ_THRESHOLD_PARAMS_CMD));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_LQ_THRESHOLD_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 mask)
+{
+ void *osbuf;
+ A_INT8 size;
+ WMI_TARGET_ERROR_REPORT_BITMASK *cmd;
+
+ size = sizeof (*cmd);
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_TARGET_ERROR_REPORT_BITMASK *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+
+ cmd->bitmask = mask;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_TARGET_ERROR_REPORT_BITMASK_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, A_UINT32 source)
+{
+ void *osbuf;
+ WMIX_HB_CHALLENGE_RESP_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMIX_HB_CHALLENGE_RESP_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->cookie = cookie;
+ cmd->source = source;
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_HB_CHALLENGE_RESP_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask,
+ A_UINT16 tsr, A_BOOL rep, A_UINT16 size,
+ A_UINT32 valid)
+{
+ void *osbuf;
+ WMIX_DBGLOG_CFG_MODULE_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMIX_DBGLOG_CFG_MODULE_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->config.cfgmmask = mmask;
+ cmd->config.cfgtsr = tsr;
+ cmd->config.cfgrep = rep;
+ cmd->config.cfgsize = size;
+ cmd->config.cfgvalid = valid;
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DBGLOG_CFG_MODULE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_stats_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_STATISTICS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid)
+{
+ void *osbuf;
+ WMI_ADD_BAD_AP_CMD *cmd;
+
+ if ((bssid == NULL) || (apIndex > WMI_MAX_BAD_AP_INDEX)) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_ADD_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->badApIndex = apIndex;
+ A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_ADD_BAD_AP_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex)
+{
+ void *osbuf;
+ WMI_DELETE_BAD_AP_CMD *cmd;
+
+ if (apIndex > WMI_MAX_BAD_AP_INDEX) {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_DELETE_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->badApIndex = apIndex;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_BAD_AP_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM)
+{
+ void *osbuf;
+ WMI_SET_TX_PWR_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_TX_PWR_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->dbM = dbM;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_txPwr_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_TX_PWR_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on)
+{
+ WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0,
+ WMI_SHORTSCANRATIO_DEFAULT,
+ DEFAULT_SCAN_CTRL_FLAGS,
+ 0};
+
+ if (on) {
+ /* Enable foreground scanning */
+ if (wmi_scanparams_cmd(wmip, scParams.fg_start_period,
+ scParams.fg_end_period,
+ scParams.bg_period,
+ scParams.minact_chdwell_time,
+ scParams.maxact_chdwell_time,
+ scParams.pas_chdwell_time,
+ scParams.shortScanRatio,
+ scParams.scanCtrlFlags,
+ scParams.max_dfsch_act_time) != A_OK) {
+ return -EIO;
+ }
+ } else {
+ wmi_disconnect_cmd(wmip);
+ if (wmi_scanparams_cmd(wmip, 0xFFFF, 0, 0, 0,
+ 0, 0, 0, 0xFF, 0) != A_OK) {
+ return -EIO;
+ }
+ }
+
+ return A_OK;
+}
+
+
+A_UINT16
+wmi_get_mapped_qos_queue(struct wmi_t *wmip, A_UINT8 trafficClass)
+{
+ A_UINT16 activeTsids=0;
+
+ LOCK_WMI(wmip);
+ activeTsids = wmip->wmi_streamExistsForAC[trafficClass];
+ UNLOCK_WMI(wmip);
+
+ return activeTsids;
+}
+
+A_STATUS
+wmi_get_roam_tbl_cmd(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ osbuf = A_NETBUF_ALLOC(0); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_TBL_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType)
+{
+ void *osbuf;
+ A_UINT32 size = sizeof(A_UINT8);
+ WMI_TARGET_ROAM_DATA *cmd;
+
+ osbuf = A_NETBUF_ALLOC(size); /* no payload */
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_TARGET_ROAM_DATA *)(A_NETBUF_DATA(osbuf));
+ cmd->roamDataType = roamDataType;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_DATA_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p,
+ A_UINT8 size)
+{
+ void *osbuf;
+ WMI_SET_ROAM_CTRL_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_SET_ROAM_CTRL_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+
+ A_MEMCPY(cmd, p, size);
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_ROAM_CTRL_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_powersave_timers_cmd(struct wmi_t *wmip,
+ WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd,
+ A_UINT8 size)
+{
+ void *osbuf;
+ WMI_POWERSAVE_TIMERS_POLICY_CMD *cmd;
+
+ /* These timers can't be zero */
+ if(!pCmd->psPollTimeout || !pCmd->triggerTimeout ||
+ !(pCmd->apsdTimPolicy == IGNORE_TIM_ALL_QUEUES_APSD ||
+ pCmd->apsdTimPolicy == PROCESS_TIM_ALL_QUEUES_APSD) ||
+ !(pCmd->simulatedAPSDTimPolicy == IGNORE_TIM_SIMULATED_APSD ||
+ pCmd->simulatedAPSDTimPolicy == PROCESS_TIM_SIMULATED_APSD))
+ return A_EINVAL;
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, size);
+
+ cmd = (WMI_POWERSAVE_TIMERS_POLICY_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, size);
+
+ A_MEMCPY(cmd, pCmd, size);
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+#ifdef CONFIG_HOST_GPIO_SUPPORT
+/* Send a command to Target to change GPIO output pins. */
+A_STATUS
+wmi_gpio_output_set(struct wmi_t *wmip,
+ A_UINT32 set_mask,
+ A_UINT32 clear_mask,
+ A_UINT32 enable_mask,
+ A_UINT32 disable_mask)
+{
+ void *osbuf;
+ WMIX_GPIO_OUTPUT_SET_CMD *output_set;
+ int size;
+
+ size = sizeof(*output_set);
+
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Enter - set=0x%x clear=0x%x enb=0x%x dis=0x%x\n", DBGARG,
+ set_mask, clear_mask, enable_mask, disable_mask));
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+ A_NETBUF_PUT(osbuf, size);
+ output_set = (WMIX_GPIO_OUTPUT_SET_CMD *)(A_NETBUF_DATA(osbuf));
+
+ output_set->set_mask = set_mask;
+ output_set->clear_mask = clear_mask;
+ output_set->enable_mask = enable_mask;
+ output_set->disable_mask = disable_mask;
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_OUTPUT_SET_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target requesting state of the GPIO input pins */
+A_STATUS
+wmi_gpio_input_get(struct wmi_t *wmip)
+{
+ void *osbuf;
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ osbuf = A_NETBUF_ALLOC(0);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INPUT_GET_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target that changes the value of a GPIO register. */
+A_STATUS
+wmi_gpio_register_set(struct wmi_t *wmip,
+ A_UINT32 gpioreg_id,
+ A_UINT32 value)
+{
+ void *osbuf;
+ WMIX_GPIO_REGISTER_SET_CMD *register_set;
+ int size;
+
+ size = sizeof(*register_set);
+
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, gpioreg_id, value));
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+ A_NETBUF_PUT(osbuf, size);
+ register_set = (WMIX_GPIO_REGISTER_SET_CMD *)(A_NETBUF_DATA(osbuf));
+
+ register_set->gpioreg_id = gpioreg_id;
+ register_set->value = value;
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_SET_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target to fetch the value of a GPIO register. */
+A_STATUS
+wmi_gpio_register_get(struct wmi_t *wmip,
+ A_UINT32 gpioreg_id)
+{
+ void *osbuf;
+ WMIX_GPIO_REGISTER_GET_CMD *register_get;
+ int size;
+
+ size = sizeof(*register_get);
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter - reg=%d\n", DBGARG, gpioreg_id));
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+ A_NETBUF_PUT(osbuf, size);
+ register_get = (WMIX_GPIO_REGISTER_GET_CMD *)(A_NETBUF_DATA(osbuf));
+
+ register_get->gpioreg_id = gpioreg_id;
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_GET_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+/* Send a command to the Target acknowledging some GPIO interrupts. */
+A_STATUS
+wmi_gpio_intr_ack(struct wmi_t *wmip,
+ A_UINT32 ack_mask)
+{
+ void *osbuf;
+ WMIX_GPIO_INTR_ACK_CMD *intr_ack;
+ int size;
+
+ size = sizeof(*intr_ack);
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter ack_mask=0x%x\n", DBGARG, ack_mask));
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+ A_NETBUF_PUT(osbuf, size);
+ intr_ack = (WMIX_GPIO_INTR_ACK_CMD *)(A_NETBUF_DATA(osbuf));
+
+ intr_ack->ack_mask = ack_mask;
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INTR_ACK_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+#endif /* CONFIG_HOST_GPIO_SUPPORT */
+
+A_STATUS
+wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, A_UINT8 eCWmin,
+ A_UINT8 eCWmax, A_UINT8 aifsn)
+{
+ void *osbuf;
+ WMI_SET_ACCESS_PARAMS_CMD *cmd;
+
+ if ((eCWmin > WMI_MAX_CW_ACPARAM) || (eCWmax > WMI_MAX_CW_ACPARAM) ||
+ (aifsn > WMI_MAX_AIFSN_ACPARAM))
+ {
+ return A_EINVAL;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_ACCESS_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->txop = txop;
+ cmd->eCWmin = eCWmin;
+ cmd->eCWmax = eCWmax;
+ cmd->aifsn = aifsn;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_ACCESS_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType,
+ A_UINT8 trafficClass, A_UINT8 maxRetries,
+ A_UINT8 enableNotify)
+{
+ void *osbuf;
+ WMI_SET_RETRY_LIMITS_CMD *cmd;
+
+ if ((frameType != MGMT_FRAMETYPE) && (frameType != CONTROL_FRAMETYPE) &&
+ (frameType != DATA_FRAMETYPE))
+ {
+ return A_EINVAL;
+ }
+
+ if (maxRetries > WMI_MAX_RETRIES) {
+ return A_EINVAL;
+ }
+
+ if (frameType != DATA_FRAMETYPE) {
+ trafficClass = 0;
+ }
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_RETRY_LIMITS_CMD *)(A_NETBUF_DATA(osbuf));
+ cmd->frameType = frameType;
+ cmd->trafficClass = trafficClass;
+ cmd->maxRetries = maxRetries;
+ cmd->enableNotify = enableNotify;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_RETRY_LIMITS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+void
+wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid)
+{
+ if (bssid != NULL) {
+ A_MEMCPY(bssid, wmip->wmi_bssid, ATH_MAC_LEN);
+ }
+}
+
+A_STATUS
+wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode)
+{
+ void *osbuf;
+ WMI_SET_OPT_MODE_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_OPT_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->optMode = optMode;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_OPT_MODE_CMDID,
+ SYNC_BOTH_WMIFLAG));
+}
+
+A_STATUS
+wmi_opt_tx_frame_cmd(struct wmi_t *wmip,
+ A_UINT8 frmType,
+ A_UINT8 *dstMacAddr,
+ A_UINT8 *bssid,
+ A_UINT16 optIEDataLen,
+ A_UINT8 *optIEData)
+{
+ void *osbuf;
+ WMI_OPT_TX_FRAME_CMD *cmd;
+ osbuf = A_NETBUF_ALLOC(optIEDataLen + sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, (optIEDataLen + sizeof(*cmd)));
+
+ cmd = (WMI_OPT_TX_FRAME_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, (optIEDataLen + sizeof(*cmd)-1));
+
+ cmd->frmType = frmType;
+ cmd->optIEDataLen = optIEDataLen;
+ //cmd->optIEData = (A_UINT8 *)((int)cmd + sizeof(*cmd));
+ A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid));
+ A_MEMCPY(cmd->dstAddr, dstMacAddr, sizeof(cmd->dstAddr));
+ A_MEMCPY(&cmd->optIEData[0], optIEData, optIEDataLen);
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_OPT_TX_FRAME_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl)
+{
+ void *osbuf;
+ WMI_BEACON_INT_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_BEACON_INT_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->beaconInterval = intvl;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BEACON_INT_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+
+A_STATUS
+wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize)
+{
+ void *osbuf;
+ WMI_SET_VOICE_PKT_SIZE_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_VOICE_PKT_SIZE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->voicePktSize = voicePktSize;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_VOICE_PKT_SIZE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+
+A_STATUS
+wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSPLen)
+{
+ void *osbuf;
+ WMI_SET_MAX_SP_LEN_CMD *cmd;
+
+ /* maxSPLen is a two-bit value. If user trys to set anything
+ * other than this, then its invalid
+ */
+ if(maxSPLen & ~0x03)
+ return A_EINVAL;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_MAX_SP_LEN_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->maxSPLen = maxSPLen;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_MAX_SP_LEN_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_UINT8
+convert_userPriority_to_trafficClass(A_UINT8 userPriority)
+{
+ return (up_to_ac[userPriority & 0x7]);
+}
+
+A_UINT8
+wmi_get_power_mode_cmd(struct wmi_t *wmip)
+{
+ return wmip->wmi_powerMode;
+}
+
+A_STATUS
+wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance)
+{
+ return A_OK;
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+static A_STATUS
+wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len)
+{
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ A_WMI_TCMD_RX_REPORT_EVENT(wmip->wmi_devt, datap, len);
+
+ return A_OK;
+}
+
+#endif /* CONFIG_HOST_TCMD_SUPPORT*/
+
+A_STATUS
+wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
+{
+ void *osbuf;
+ WMI_SET_AUTH_MODE_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_AUTH_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->mode = mode;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_AUTH_MODE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode)
+{
+ void *osbuf;
+ WMI_SET_REASSOC_MODE_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_REASSOC_MODE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->mode = mode;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_REASSOC_MODE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status)
+{
+ void *osbuf;
+ WMI_SET_LPREAMBLE_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_LPREAMBLE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->status = status;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_LPREAMBLE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold)
+{
+ void *osbuf;
+ WMI_SET_RTS_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_RTS_CMD*)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->threshold = threshold;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_RTS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status)
+{
+ void *osbuf;
+ WMI_SET_WMM_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_WMM_CMD*)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->status = status;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_CMDID,
+ NO_SYNC_WMIFLAG));
+
+}
+
+A_STATUS
+wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG cfg)
+{
+ void *osbuf;
+ WMI_SET_WMM_TXOP_CMD *cmd;
+
+ if( !((cfg == WMI_TXOP_DISABLED) || (cfg == WMI_TXOP_ENABLED)) )
+ return A_EINVAL;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_WMM_TXOP_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->txopEnable = cfg;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_TXOP_CMDID,
+ NO_SYNC_WMIFLAG));
+
+}
+
+#ifdef CONFIG_HOST_TCMD_SUPPORT
+/* WMI layer doesn't need to know the data type of the test cmd.
+ This would be beneficial for customers like Qualcomm, who might
+ have different test command requirements from differnt manufacturers
+ */
+A_STATUS
+wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32 len)
+{
+ void *osbuf;
+ char *data;
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG));
+
+ osbuf= A_NETBUF_ALLOC(len);
+ if(osbuf == NULL)
+ {
+ return A_NO_MEMORY;
+ }
+ A_NETBUF_PUT(osbuf, len);
+ data = A_NETBUF_DATA(osbuf);
+ A_MEMCPY(data, buf, len);
+
+ return(wmi_cmd_send(wmip, osbuf, WMI_TEST_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+#endif
+
+A_STATUS
+wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status)
+{
+ void *osbuf;
+ WMI_SET_BT_STATUS_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_BT_STATUS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->streamType = streamType;
+ cmd->status = status;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_STATUS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd)
+{
+ void *osbuf;
+ WMI_SET_BT_PARAMS_CMD* alloc_cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ alloc_cmd = (WMI_SET_BT_PARAMS_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(alloc_cmd, sizeof(*cmd));
+ A_MEMCPY(alloc_cmd, cmd, sizeof(*cmd));
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_PARAMS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_get_keepalive_configured(struct wmi_t *wmip)
+{
+ void *osbuf;
+ WMI_GET_KEEPALIVE_CMD *cmd;
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+ cmd = (WMI_GET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ return (wmi_cmd_send(wmip, osbuf, WMI_GET_KEEPALIVE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_UINT8
+wmi_get_keepalive_cmd(struct wmi_t *wmip)
+{
+ return wmip->wmi_keepaliveInterval;
+}
+
+A_STATUS
+wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval)
+{
+ void *osbuf;
+ WMI_SET_KEEPALIVE_CMD *cmd;
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*cmd));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*cmd));
+
+ cmd = (WMI_SET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd->keepaliveInterval = keepaliveInterval;
+ wmip->wmi_keepaliveInterval = keepaliveInterval;
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_KEEPALIVE_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, A_UINT8 ieLen,
+ A_UINT8 *ieInfo)
+{
+ void *osbuf;
+ WMI_SET_APPIE_CMD *cmd;
+ A_UINT16 cmdLen;
+
+ if (ieLen > WMI_MAX_IE_LEN) {
+ return A_ERROR;
+ }
+ cmdLen = sizeof(*cmd) + ieLen - 1;
+ osbuf = A_NETBUF_ALLOC(cmdLen);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, cmdLen);
+
+ cmd = (WMI_SET_APPIE_CMD *)(A_NETBUF_DATA(osbuf));
+ A_MEMZERO(cmd, cmdLen);
+
+ cmd->mgmtFrmType = mgmtFrmType;
+ cmd->ieLen = ieLen;
+ A_MEMCPY(cmd->ieInfo, ieInfo, ieLen);
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_APPIE_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_STATUS
+wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen)
+{
+ void *osbuf;
+ A_UINT8 *data;
+
+ osbuf = A_NETBUF_ALLOC(dataLen);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, dataLen);
+
+ data = A_NETBUF_DATA(osbuf);
+
+ A_MEMCPY(data, cmd, dataLen);
+
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WHALPARAM_CMDID, NO_SYNC_WMIFLAG));
+}
+
+A_INT32
+wmi_get_rate(A_INT8 rateindex)
+{
+ if (rateindex == RATE_AUTO) {
+ return 0;
+ } else {
+ return(wmi_rateTable[(A_UINT32) rateindex]);
+ }
+}
+
+void
+wmi_node_return (struct wmi_t *wmip, bss_t *bss)
+{
+ if (NULL != bss)
+ {
+ wlan_node_return (&wmip->wmi_scan_table, bss);
+ }
+}
+
+bss_t *
+wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid,
+ A_UINT32 ssidLength, A_BOOL bIsWPA2)
+{
+ bss_t *node = NULL;
+ node = wlan_find_Ssidnode (&wmip->wmi_scan_table, pSsid,
+ ssidLength, bIsWPA2);
+ return node;
+}
+
+void
+wmi_free_allnodes(struct wmi_t *wmip)
+{
+ wlan_free_allnodes(&wmip->wmi_scan_table);
+}
+
+bss_t *
+wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr)
+{
+ bss_t *ni=NULL;
+ ni=wlan_find_node(&wmip->wmi_scan_table,macaddr);
+ return ni;
+}
+
+A_STATUS
+wmi_dset_open_reply(struct wmi_t *wmip,
+ A_UINT32 status,
+ A_UINT32 access_cookie,
+ A_UINT32 dset_size,
+ A_UINT32 dset_version,
+ A_UINT32 targ_handle,
+ A_UINT32 targ_reply_fn,
+ A_UINT32 targ_reply_arg)
+{
+ void *osbuf;
+ WMIX_DSETOPEN_REPLY_CMD *open_reply;
+
+ A_DPRINTF(DBG_WMI, (DBGFMT "Enter - wmip=0x%x\n", DBGARG, (int)wmip));
+
+ osbuf = A_NETBUF_ALLOC(sizeof(*open_reply));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ A_NETBUF_PUT(osbuf, sizeof(*open_reply));
+ open_reply = (WMIX_DSETOPEN_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
+
+ open_reply->status = status;
+ open_reply->targ_dset_handle = targ_handle;
+ open_reply->targ_reply_fn = targ_reply_fn;
+ open_reply->targ_reply_arg = targ_reply_arg;
+ open_reply->access_cookie = access_cookie;
+ open_reply->size = dset_size;
+ open_reply->version = dset_version;
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETOPEN_REPLY_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
+static A_STATUS
+wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len)
+{
+ WMI_PMKID_LIST_REPLY *reply;
+ A_UINT32 expected_len;
+
+ if (len < sizeof(WMI_PMKID_LIST_REPLY)) {
+ return A_EINVAL;
+ }
+ reply = (WMI_PMKID_LIST_REPLY *)datap;
+ expected_len = sizeof(reply->numPMKID) + reply->numPMKID * WMI_PMKID_LEN;
+
+ if (len < expected_len) {
+ return A_EINVAL;
+ }
+
+ A_WMI_PMKID_LIST_EVENT(wmip->wmi_devt, reply->numPMKID,
+ reply->pmkidList);
+
+ return A_OK;
+}
+
+#ifdef CONFIG_HOST_DSET_SUPPORT
+A_STATUS
+wmi_dset_data_reply(struct wmi_t *wmip,
+ A_UINT32 status,
+ A_UINT8 *user_buf,
+ A_UINT32 length,
+ A_UINT32 targ_buf,
+ A_UINT32 targ_reply_fn,
+ A_UINT32 targ_reply_arg)
+{
+ void *osbuf;
+ WMIX_DSETDATA_REPLY_CMD *data_reply;
+ int size;
+
+ size = sizeof(*data_reply) + length;
+
+ A_DPRINTF(DBG_WMI,
+ (DBGFMT "Enter - length=%d status=%d\n", DBGARG, length, status));
+
+ osbuf = A_NETBUF_ALLOC(size);
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+ A_NETBUF_PUT(osbuf, size);
+ data_reply = (WMIX_DSETDATA_REPLY_CMD *)(A_NETBUF_DATA(osbuf));
+
+ data_reply->status = status;
+ data_reply->targ_buf = targ_buf;
+ data_reply->targ_reply_fn = targ_reply_fn;
+ data_reply->targ_reply_arg = targ_reply_arg;
+ data_reply->length = length;
+
+ if (status == A_OK) {
+ if (a_copy_from_user(data_reply->buf, user_buf, length)) {
+ return A_ERROR;
+ }
+ }
+
+ return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETDATA_REPLY_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+#endif /* CONFIG_HOST_DSET_SUPPORT */
+
+A_STATUS
+wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status)
+{
+ void *osbuf;
+ char *cmd;
+
+ wps_enable = status;
+
+ osbuf = a_netbuf_alloc(sizeof(1));
+ if (osbuf == NULL) {
+ return A_NO_MEMORY;
+ }
+
+ a_netbuf_put(osbuf, sizeof(1));
+
+ cmd = (char *)(a_netbuf_to_data(osbuf));
+
+ A_MEMZERO(cmd, sizeof(*cmd));
+ cmd[0] = (status?1:0);
+ return (wmi_cmd_send(wmip, osbuf, WMI_SET_WSC_STATUS_CMDID,
+ NO_SYNC_WMIFLAG));
+}
+
--- /dev/null
+/*
+ *
+ * Copyright (c) 2004-2007 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+
+#if 0
+Wireless Module Interface (WMI) Documentaion
+
+ This section describes the format and the usage model for WMI control and
+ data messages between the host and the AR6000-based targets. The header
+ file include/wmi.h contains all command and event manifest constants as
+ well as structure typedefs for each set of command and reply parameters.
+
+Data Frames
+
+ The data payload transmitted and received by the target follows RFC-1042
+ encapsulation and thus starts with an 802.2-style LLC-SNAP header. The
+ WLAN module completes 802.11 encapsulation of the payload, including the
+ MAC header, FCS, and WLAN security related fields. At the interface to the
+ message transport (HTC), a data frame is encapsulated in a WMI message.
+
+WMI Message Structure
+
+ The WMI protocol leverages an 802.3-style Ethernet header in communicating
+ the source and destination information between the host and the AR6000
+ modules using a 14-byte 802.3 header ahead of the 802.2-style payload. In
+ addition, the WMI protocol adds a header to all data messages:
+
+ {
+ INT8 rssi
+ The RSSI of the received packet and its units are shown in db above the
+ noise floor, and the noise floor is shown in dbm.
+ UINT8 info
+ Contains information on message type and user priority. Message type
+ differentiates between a data packet and a synchronization message.
+ } WMI_DATA_HDR
+
+ User priority contains the 802.1d user priority info from host to target. Host
+ software translates the host Ethernet format to 802.3 format prior to Tx and
+ 802.3 format to host format in the Rx direction. The host does not transmit the
+ FCS that follows the data. MsgType differentiates between a regular data
+ packet (msgType=0) and a synchronization message (msgType=1).
+
+Data Endpoints
+
+ The AR6000 chipset provides several data endpoints to support quality of
+ service (QoS) and maintains separate queues and separate DMA engines for
+ each data endpoint. A data endpoint can be bi-directional.
+
+ Best effort (BE) class traffic uses the default data endpoint (2). The host can
+ establish up to two additional data endpoints for other traffic classes. Once
+ such a data endpoint is established, it sends and receives corresponding QoS
+ traffic in a manner similar to the default data endpoint.
+
+ If QoS is desired over the interconnect, host software must classify each data
+ packet and place it on the appropriate data endpoint. The information
+ required to classify data is generally available in-band as an 802.1p/q style
+ tag or as the ToS field in the IP header. The information may also be available
+ out-of-band depending on the host DDI.
+
+Connection States
+
+ Table B-1 describes the AR6000 WLAN connection states:
+
+ Table B-1. AR6000 Connection States
+
+Connection State
+ Description
+
+ DISCONNECTED
+ In this state, the AR6000 device is not connected to a wireless
+ network. The device is in this state after reset when it sends the
+ WIRELESS MODULE \93READY\94 EVENT, after it processes a
+ DISCONNECT command, and when it loses its link with the
+ access point (AP) that it was connected to. The device signals a
+ transition to the DISCONNECTED state with a \93DISCONNECT\94
+ event.
+
+CONNECTED
+ In this state, the AR6000 device is connected to wireless networks.
+ The device enters this state after successfully processing a
+ CONNECT, which establishes a connection with a wireless
+ network. The device signals a transition to the CONNECTED state
+ with a \93CONNECT\94 event.
+
+
+Message Types
+
+ WMI uses commands, replies, and events for the control and configuration of
+ the AR6000 device. The control protocol is asynchronous. Table B-2 describes
+ AR6000 message types:
+
+Table B-2. AR6000 Message Types
+
+Message Type
+ Description
+
+Commands
+ Control messages that flow from the host to the device
+
+Replies/Events
+ Control messages that flow from the device to the host.
+
+ The device issues a reply to some WMI commands, but not to others.
+ The payload in a reply is command-specific, and some commands do
+ not trigger a reply message at all. Events are control messages issued
+ by the device to signal the occurrence of an asynchronous event.
+
+
+WMI Message Format
+
+ All WMI control commands, replies and events use the header format:
+
+ WMI_CMD_HDR Header Format
+ {
+ UINT16 id
+ This 16-bit constant identifies which WMI command the host is issuing,
+ which command the target is replying to, or which event has occurred.
+ WMI_CMD_HDR
+ }
+
+
+ A variable-size command-, reply-, or event-specific payload follows the
+ header. Over the interconnect, all fields in control messages (including
+ WMI_CMD_HDR and the command specific payload) use 32-bit little Endian
+ byte ordering and fields are packed. The AR6000 device always executes
+ commands in order, and the host may send multiple commands without
+ waiting for previous commands to complete. A majority of commands are
+ processed to completion once received. Other commands trigger a longer
+ duration activity whose completion is signaled to the host through an event.
+
+Command Restrictions
+
+ Some commands may only be issued when the AR6000 device is in a certain
+ state. The host is required to wait for an event signaling a state transition
+ before such a command can be issued. For example, if a command requires
+ the device to be in the CONNECTED state, then the host is required to wait
+ for a \93CONNECT\94 event before it issues that command.
+
+ The device ignores any commands inappropriate for its current state. If the
+ command triggers a reply, the device generates an error reply. Otherwise, the
+ device silently ignores the inappropriate command.
+
+Command and Data Synchronization
+
+ WMI provides a mechanism for a host to advise the device of necessary
+ synchronization between commands and data. The device implements
+ synchronization; no implicit synchronization exists between endpoints.
+
+ The host controls synchronization using the \93SYNCHRONIZE\94 command
+ over the control channel and synchronization messages over data channels.
+ The device stops each data channel upon receiving a synchronization message
+ on that channel, processing all data packets received prior to that message.
+ After the device receives synchronization messages for each data endpoint
+ and the \93SYNCHRONIZE\94 command, it resumes all channels.
+
+ When the host must guarantee a command executes before processing new
+ data packets, it first issues the command, then issues the \93SYNCHRONIZE\94
+ command and sends synchronization messages on data channels. When the
+ host must guarantee the device has processed all old data packets before a
+ processing a new command, it issues a \93SYNCHRONIZE\94 command and
+ synchronization messages on all data channels, then issues the desired
+ command.
+
+
+
+WMI Commands
+
+ ADD_BAD_AP
+ Cause the AR6000 device to avoid a particular AP
+ ADD_CIPHER_KEY
+ Add or replace any of the four AR6000 encryption keys
+ ADD_WOW_PATTERN
+ Used to add a pattern to the WoW pattern list
+ CLR_RSSI_SNR
+ Clear the current calculated RSSI and SNR value
+ CONNECT_CMD
+ Request that the AR6000 device establish a wireless connection
+ with the specified SSID
+ CREATE_PSTREAM
+ Create prioritized data endpoint between the host and device
+ DELETE_BAD_AP
+ Clear an entry in the bad AP table
+ DELETE_CIPHER_KEY
+ Delete a previously added cipher key
+ DELETE_PSTREAM
+ Delete a prioritized data endpoint
+ DELETE_WOW_PATTERN
+ Remove a pre-specified pattern from the WoW pattern list
+ EXTENSION
+ WMI message interface command
+ GET_BIT_RATE
+ Retrieve rate most recently used by the AR6000
+ GET_CHANNEL_LIST
+ Retrieve list of channels used by the AR6000
+ GET_FIXRATES
+ Retrieves the rate-mask set via the SET_FIXRATES command.
+ GET_PMKID_LIST_CMD
+ Retrieve the firmware list of PMKIDs
+ GET_ROAM_DATA
+ Internal use for data collection; available in special build only
+ GET_ROAM_TBL
+ Retrieve the roaming table maintained on the target
+ GET_TARGET_STATS
+ Request that the target send the statistics it maintains
+ GET_TX_PWR
+ Retrieve the current AR6000 device Tx power levels
+ GET_WOW_LIST
+ Retrieve the current list of WoW patterns
+ LQ_THRESHOLD_PARAMS
+ Set the link quality thresholds
+ OPT_TX_FRAME
+ Send a special frame (special feature)
+ RECONNECT
+ Request a reconnection to a BSS
+ RSSI_THRESHOLD_PARAMS
+ Configure how the AR6000 device monitors and reports signal
+ strength (RSSI) of the connected BSS
+ SCAN_PARAMS
+ Determine dwell time and changes scanned channels
+ SET_ACCESS_PARAMS
+ Set access parameters for the wireless network
+ SET_ADHOC_BSSID
+ Set the BSSID for an ad hoc network
+ SET_AKMP_PARAMS
+ Set multiPMKID mode
+ SET_APPIE
+ Add application-specified IE to a management frame
+ SET_ASSOC_INFO
+ Specify the IEs the device should add to association or
+ reassociation requests
+ SET_AUTH_MODE
+ Set 802.11 authentication mode of reconnection
+ SET_BEACON_INT
+ Set the beacon interval for an ad hoc network
+ SET_BIT_RATE
+ Set the AR6000 to a specific fixed bit rate
+ SET_BMISS_TIME
+ Set the beacon miss time
+ SET_BSS_FILTER
+ Inform the AR6000 of network types about which it wants to
+ receive information using a \93BSSINFO\94 event
+ SET_BT_PARAMS
+ Set the status of a Bluetooth stream (SCO or A2DP) or set
+ Bluetooth coexistence register parameters
+ SET_BT_STATUS
+ Set the status of a Bluetooth stream (SCO or A2DP)
+ SET_CHANNEL_PARAMETERS
+ Configure WLAN channel parameters
+ SET_DISC_TIMEOUT
+ Set the amount of time the AR6000 spends attempting to
+ reestablish a connection
+ SET_FIXRATES
+ Set the device to a specific fixed PHY rate (supported subset)
+ SET_HALPARAM
+ Internal AR6000 command to set certain hardware parameters
+ SET_HOST_SLEEP_MODE
+ Set the host mode to asleep or awake
+ SET_IBSS_PM_CAPS
+ Support a non-standard power management scheme for an
+ ad hoc network
+ SET_LISTEN_INT
+ Request a listen interval
+ SET_LPREAMBLE
+ Override the short preamble capability of the AR6000 device
+ SET_MAX_SP_LEN
+ Set the maximum service period
+ SET_OPT_MODE
+ Set the special mode on/off (special feature)
+ SET_PMKID
+ Set the pairwise master key ID (PMKID)
+ SET_PMKID_LIST_CMD
+ Configure the firmware list of PMKIDs
+ SET_POWER_MODE
+ Set guidelines on trade-off between power utilization
+ SET_POWER_PARAMS
+ Configure power parameters
+ SET_POWERSAVE_PARAMS
+ Set the two AR6000 power save timers
+ SET_PROBED_SSID
+ Provide list of SSIDs the device should seek
+ SET_REASSOC_MODE
+ Specify whether the disassociated frame should be sent upon
+ reassociation
+ SET_RETRY_LIMITS
+ Limit how many times the device tries to send a frame
+ SET_ROAM_CTRL
+ Control roaming behavior
+ SET_RTS
+ Determine when RTS should be sent
+ SET_SCAN_PARAMS
+ Set the AR6000 scan parameters
+ SET_TKIP_COUNTERMEASURES
+ Enable/disable reports of TKIP MIC errors
+ SET_TX_PWR
+ Specify the AR6000 device Tx power levels
+ SET_VOICE_PKT_SIZE
+ Set voice packet size
+ SET_WMM
+ Override the AR6000 WMM capability
+ SET_WMM_TXOP
+ Configure TxOP bursting when sending traffic to a WMM-
+ capable AP
+ SET_WOW_MODE
+ Enable/disable WoW mode
+ SET_WSC_STATUS
+ Enable/disable profile check in cserv when the WPS protocol
+ is in progress
+ SNR_THRESHOLD_PARAMS
+ Configure how the device monitors and reports SNR of BSS
+ START_SCAN
+ Start a long or short channel scan
+ SYNCHRONIZE
+ Force a synchronization point between command and data
+ paths
+ TARGET_REPORT_ERROR_BITMASK
+ Control \93ERROR_REPORT\94 events from the AR6000
+
+
+
+
+Name
+ ADD_BAD_AP
+
+Synopsis
+ The host uses this command to cause the AR6000 to avoid a particular AP. The
+ AR6000 maintain a table with up to two APs to avoid. An ADD_BAD_AP command
+ adds or replaces the specified entry in this bad AP table.
+
+ If the AR6000 are currently connected to the AP specified in this command, they
+ disassociate.
+
+Command
+ wmiconfig eth1 --badap <bssid> <badApIndex>
+
+Command Parameters
+ UINT8 badApIndex Index [0...1] that identifies which entry in the
+ bad AP table to use
+
+
+ UINT8 bssid[6] MAC address of the AP to avoid
+
+Command Values
+ badApIndex = 0, 1 Entry in the bad AP table to use
+
+Reset Value
+ The bad AP table is cleared
+
+Restrictions
+ None
+
+See Also
+ \93DELETE_BAD_AP\94 on page B-13
+
+=====================================================================
+Name
+ ADD_CIPHER_KEY
+
+Synopsis
+ The host uses this command to add/replace any of four encryption keys on the
+ AR6000. The ADD_CIPHER_KEY command is issued after the CONNECT event
+ has been received by the host for all dot11Auth modes except for SHARED_AUTH.
+ When the dot11AuthMode is SHARED_AUTH, then the ADD_CIPHER_KEY
+ command should be issued before the \93CONNECT\94 command.
+
+Command
+ wmiconfig eth1 --cipherkey <keyIndex> <keyType> <keyUsage>
+ <keyLength> <keyopctrl> <keyRSC> <key>
+
+Command Parameters
+ UINT8 keyIndex Index (0...3) of the key to add/replace;
+ uniquely identifies the key
+ UINT8 keyType CRYPTO_TYPE
+ UINT8 keyUsage Specifies usage parameters of the key when
+ keyType = WEP_CRYPT
+ UINT8 keyLength Length of the key in bytes
+ UINT8 keyOpCtrl bit[0] = Initialize TSC (default),
+ bit[1] = Initialize RSC
+ UINT8 keyRSC[8] Key replay sequence counter (RSC) initial
+ value the device should use
+ UINT8 key[32] Key material used for this connection
+ Command Values
+ {
+ NONE_CRYPT = 1
+ WEP_CRYPT = 2
+ TKIP_CRYPT = 3
+ AES_CRYPT = 4
+ KEY_OP_INIT_TSC 0x01
+ KEY_OP_INIT_RSC 0x02
+ KEY_OP_INIT_VAL 0x03
+ Default is to Initialize the TSC
+ KEY_OP_VALID_MASK 0x04
+ Two operations defined
+ } CRYPTO_TYPE
+
+ {
+ PAIRWISE_USAGE = 0 Set if the key is used for unicast traffic only
+ GROUP_USAGE = 1 Set if the key is used to receive multicast
+ traffic (also set for static WEP keys)
+ TX_USAGE = 2 Set for the GROUP key used to transmit frames
+ All others are reserved
+ } KEY_USAGE
+
+Reset Value
+ The four available keys are disabled.
+
+Restrictions
+ The cipher should correspond to the encryption mode specified in the \93CONNECT\94
+ command.
+
+See Also
+ \93DELETE_CIPHER_KEY\94
+
+=====================================================================
+
+
+Name
+ ADD_WOW_PATTERN
+
+Synopsis
+ The host uses this command to add a pattern to the WoW pattern list; used for
+ pattern-matching for host wakeups by the WoW module. If the host mode is asleep
+ and WoW is enabled, all packets are matched against the existing WoW patterns. If a
+ packet matches any of the patterns specified, the target will wake up the host. All
+ non-matching packets are discarded by the target without being sent up to the host.
+
+Command
+ wmiconfig \96addwowpattern <list-id> <filter-size> <filter-offset>
+ <pattern> <mask>
+
+Command Parameters
+ A_UINT8 filter_list_id ID of the list that is to include the new pattern
+ A_UINT8 filter_size Size of the new pattern
+ A_UINT8 filter_offset Offset at which the pattern matching for this
+ new pattern should begin at
+ A_UINT8 filter[1] Byte stream that contains both the pattern and
+ the mask of the new WoW wake-up pattern
+
+Reply Parameters
+ None
+
+Reset Value
+ None defined (default host mode is awake)
+
+Restrictions
+ None
+
+See Also
+ \93DELETE_WOW_PATTERN\94
+
+=====================================================================
+
+
+Name
+ CLR_RSSI_SNR
+
+Synopsis
+ Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
+ running-average value. This command will clear the history and have a fresh start
+ for the running-average mechanism.
+
+Command
+ wmiconfig eth1 --cleanRssiSnr
+
+Command Parameters
+ None
+
+Reply Parameters
+ None
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+=====================================================================
+
+Name
+ CONNECT_CMD
+
+Synopsis
+ New connect control information (connectCtrl) is added, with 32 possible modifiers.
+
+ CONNECT_SEND_REASSOC
+ Valid only for a host-controlled connection to a
+ particular AP. If this bit is set, a reassociation frame is
+ sent. If this bit is clear, an association request frame is
+ sent to the AP.
+
+ CONNECT_IGNORE_WPAx_GROUP_CIPHER
+ No group key is issued in the CONNECT command,
+ so use the group key advertised by the AP. In a target-
+ initiated roaming situation this allows a STA to roam
+ between APs that support different multicast ciphers.
+
+ CONNECT_PROFILE_MATCH_DONE
+ In a host-controlled connection case, it is possible that
+ during connect, firmware may not have the
+ information for a profile match (e.g, when the AP
+ supports hidden SSIDs and the device may not
+ transmit probe requests during connect). By setting
+ this bit in the connection control information, the
+ firmware waits for a beacon from the AP with the
+ BSSID supplied in the CONNECT command. No
+ additional profile checks are done.
+
+ CONNECT_IGNORE_AAC_BEACON
+ Ignore the Admission Capacity information in the
+ beacon of the AP
+
+ CONNECT_ASSOC_POLICY_USER
+ When set, the CONNECT_SEND_REASSOC setting
+ determines if an Assoc or Reassoc is sent to an AP
+
+Command
+ wmiconfig --setconnectctrl <ctrl flags bitmask>
+
+Command Parameters
+ typedef struct{
+ A_UINT8 networktype;
+ A_UINT8 dot11authmode;
+ A_UINT8 authmode;
+ A_UINT8 pairwiseCryptoType; /*CRYPTO_TYPE*/
+ A_UINT8 pairwiseCryptoLen;
+ A_UINT8 groupCryptoType; /*CRYPTO_TYPE*/
+ A_UINT8 groupCryptoLen;
+ A_UINT8 ssidLength;
+ A_UCHAR ssid[WMI_MAX_SSID_LEN];
+ A_UINT16 channel;
+ A_UINT8 bssid[AUTH_MAC_LEN];
+ A_UINT8 ctrl_flags; /*WMI_CONNECT_CTRL_FLAGS_BITS*/
+ } WMI_CONNECT_CMD;
+
+ ctrl flags bitmask
+ = 0x0001 CONNECT_ASSOC_POLICY_USER
+ Assoc frames are sent using the policy specified by
+ the flag
+ = 0x0002 CONNECT_SEND_REASSOC
+ Send Reassoc frame while connecting, otherwise send
+ assoc frames
+ = 0x0004 CONNECT_IGNORE_WPAx_GROUP_CIPHER
+ Ignore WPAx group cipher for WPA/WPA2
+ = 0x0008 CONNECT_PROFILE_MATCH_DONE
+ Ignore any profile check
+ = 0x0010 CONNECT_IGNORE_AAC_BEACON
+ Ignore the admission control information in the
+ beacon
+ ... CONNECT_CMD, continued
+ Command Values
+ typedef enum {
+ INFRA_NETWORK = 0x01,
+ ADHOC_NETWORK = 0x02,
+ ADHOC_CREATOR = 0x04,
+ } NETWORK_TYPE;
+
+ typedef enum {
+ OPEN_AUTH = 0x01,
+ SHARED_AUTH = 0x02,
+ LEAP_AUTH = 0x04,
+ } DOT11_AUTH_MODE;
+ typedef enum {
+ NONE_AUTH = 0x01,
+ WPA_AUTH = 0x02,
+ WPA_PSK_AUTH = 0x03,
+ WPA2_AUTH = 0x04,
+ WPA2_PSK_AUTH = 0x05,
+ WPA_AUTH_CCKM = 0x06,
+ WPA2_AUTH_CCKM = 0x07,
+ } AUTH_MODE;
+ typedef enum {
+ NONE_CRYPT = 0x01,
+ WEP_CRYPT = 0x02,
+ TKIP_CRYPT = 0x03,
+ AES_CRYPT = 0x04,
+ } CRYPTO_TYPE;
+ typedef enum {
+ CONNECT_ASSOC_POLICY_USER = 0x0001,
+ CONNECT_SEND_REASSOC = 0x0002,
+ CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004,
+ CONNECT_PROFILE_MATCH_DONE = 0x0008,
+ CONNECT_IGNORE_AAC_BEACON = 0x0010,
+ } WMI_CONNECT_CTRL_FLAGS_BITS;
+
+ pairwiseCryptoLen and groupCryptoLen are valid when the respective
+ CryptoTypesis WEP_CRYPT, otherwise this value should be 0. This is the length in
+ bytes.
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ CREATE_PSTREAM
+
+Synopsis
+ The host uses this command to create a new prioritized data endpoint between the
+ host and the AR6000 device that carries a prioritized stream of data. If the AP that the
+ device connects to requires TSPEC stream establishment, the device requests the
+ corresponding TSPEC with the AP. The maximum and minimum service interval
+ ranges from 0 \96 0x7FFFFFFF (ms), where 0 = disabled. The device does not send a
+ reply event for this command, as it is always assumed the command has succeeded.
+ An AP admission control response comes to the host via a WMI_CAC_INDICATION
+ event, once the response for the ADDTS frame comes.
+
+ Examples of cases where reassociation is generated (when WMM) and cases where
+ ADDTS is generated (when WMM and enabling ACM) are when:
+ Changing UAPSD flags in WMM mode, reassociation is generated
+ Changing the interval of sending auto QoS Null frame in WMM mode;
+ reassociation is not generated
+ Issuing a command with same previous parameters in WMM mode and enabling
+ ACM, an ADDTS request is generated
+ Changing the interval of a QoS null frame sending in WMM mode and enabling
+ ACM, an ADDTS request is generated
+ Issuing the command in disconnected state, reassociation or ADDTS is not
+ generated but the parameters are available after (re)association
+
+Command
+ --createqos <user priority> <direction> <traffic class>
+<trafficType> <voice PS capability> <min service interval> <max
+service interval> <inactivity interval> <suspension interval>
+<service start time> <tsid> <nominal MSDU> <max MSDU> <min data
+rate> <mean data rate> <peak data rate> <max burst size> <delay
+bound> <min phy rate> <sba> <medium time> where:
+
+ <user priority>
+ 802.1D user priority range (0\967)
+ <direction>
+ = 0 Tx (uplink) traffic
+ = 1 Rx (downlink) traffic
+ = 2 Bi-directional traffic
+ <traffic class>
+ = 1 BK
+ = 2 VI
+ = 3 VO
+ <trafficType>
+ = 0 Aperiodic
+ = 1 Periodic
+ <voice PS capability>
+ Specifies whether the voice power save mechanism
+ (APSD if AP supports it or legacy/simulated APSD
+ [using PS-Poll]) should be used
+ = 0 Disable voice power save for traffic class
+ = 1 Enable APSD voice power save for traffic class
+ = 2 Enable voice power save for all traffic classes
+ <min service interval>
+ (In ms)
+ <max service interval>
+ Inactivity interval (in ms) (0 = Infinite)
+ <suspension interval>
+ (In ms)
+ <service start time>
+ Service start time
+ <tsid>
+ TSID range (0\9615)
+ <nominal MSDU>
+ Nominal MAC SDU size
+ <max MSDU>
+ Maximum MAC SDU size
+ <min data rate>
+ Minimum data rate (in bps)
+ <mean data rate>
+ Mean data rate (in bps)
+ <peak data rate>
+ Peak data rate (in bps)
+ <max burst size>
+ Maximum burst size (in bps)
+ <delay bound>
+ Delay bound
+ <min phy rate>
+ Minimum PHY rate (in bps)
+ <sba>
+ Surplus bandwidth allowance
+ <medium time>
+ Medium time in TU of 32-ms periods per sec
+ ... CREATE_PSTREAM (continued)
+
+Command Parameters
+ UINT8 trafficClass TRAFFIC_CLASS value
+ UINT8 traffic
+ Direction
+ DIR_TYPE value
+ UINT8 rxQueueNum
+ AR6000 device mailbox index (2 or 3)
+ corresponding to the endpoint the host
+ wishes to use to receive packets for the
+ prioritized stream
+ UINT8 trafficType TRAFFIC_TYPE value
+ UINT8 voicePS
+Capability
+ VOICEPS_CAP_TYPE value
+ UINT8 tsid Traffic stream ID
+ UINT8 userPriority 802.1D user priority
+ UINT16 nominalMSDU Nominal MSDU in octets
+ UINT16 maxMSDU Maximum MSDU in octets
+ UINT32 minServiceInt Minimum service interval: the min.
+ period of traffic specified (in ms)
+ UINT32 maxServiceInt Maximum service interval: the max.
+ period of traffic specified (in ms)
+ UINT32 inactivityInt Indicates how many ms an established
+ stream is inactive before the prioritized
+ data endpoint is taken down and the
+ corresponding T-SPEC deleted
+ UINT32 suspensionInt Suspension interval (in ms)
+ UINT32 service StartTime Service start time
+ UINT32 minDataRate Minimum data rate (in bps)
+ UINT32 meanDataRate Mean data rate (in bps)
+ UINT32 peakDataRate Peak data rate (in bps)
+ UINT32 maxBurstSize
+ UINT32 delayBound
+ UINT32 minPhyRate Minimum PHY rate for TSPEC (in bps)
+ UINT32 sba Surplus bandwidth allowance
+ UINT32 mediumTime Medium TSPEC time (in units of 32 ms)
+Command Values
+ {
+ WMM_AC_BE = 0 Best Effort
+ WMM_AC_BK = 1 Background
+ WMM_AC_VI = 2 Video
+ WMM_AC_VO = 3 Voice
+ All other values reserved
+ } TRAFFIC_CLASS
+ {
+ UPLINK_TRAFFIC = 0 From the AR6000 device to the AP
+ DOWNLINK_TRAFFIC = 1 From the AP to the AR6000 device
+ BIDIR_TRAFFIC = 2 Bi-directional traffic
+ All other values reserved
+ } DIR_TYPE
+ {
+ DISABLE_FOR_THIS_AC = 0
+ ENABLE_FOR_THIS_AC = 1
+ ENABLE_FOR_ALL_AC = 2
+ All other values reserved
+ } VOICEPS_CAP_TYPE
+
+ ... CREATE_PSTREAM (continued)
+
+
+ VI BE BK Supported, Y/N?
+ 0 0 0 0 Y
+ 0 0 0 1 Y
+ 0 0 1 0 N
+ 0 0 1 1 N
+ 0 1 0 0 Y
+ 0 1 0 1 Y
+ 0 1 1 0 N
+ 0 1 1 1 N
+ 1 0 0 0 Y
+ 1 0 0 1 Y
+ 1 0 1 0 N
+ 1 1 0 0 N
+ 1 1 0 1 Y
+ 1 1 0 0 N
+ 1 1 1 0 N
+ 1 1 1 1 Y
+
+Reset Value
+ No pstream is present after reset; each of the BE, BK, VI,VO pstreams must be created
+ (either implicitly by data flow or explicitly by user)
+
+Restrictions
+ This command can only be issued when the device is in the CONNECTED state. If
+ the device receives the command while in DISCONNECTED state, it replies with a
+ failure indication. At most four prioritized data endpoints can be created, one for
+ each AC.
+
+See Also
+ \93DELETE_PSTREAM\94
+=====================================================================
+
+Name
+ DELETE_BAD_AP
+
+Synopsis
+ The host uses this command to clear a particular entry in the bad AP table
+
+Command
+ wmiconfig eth1 --rmAP [--num=<index>] // used to clear a badAP
+ entry. num is index from 0-3
+
+Command Parameters
+ UINT8 badApIndex Index [0...n] that identifies the entry in the bad
+ AP table to delete
+
+Command Values
+ badApIndex = 0, 1, 2, 3
+ Entry in the bad AP table
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+See Also
+ \93ADD_BAD_AP\94
+
+=====================================================================
+
+
+Name
+ DELETE_CIPHER_KEY
+
+Synopsis
+ The host uses this command to delete a key that was previously added with the
+ \93ADD_CIPHER_KEY\94 command.
+
+Command
+ TBD
+
+Command Parameters
+ UINT8 keyIndex Index (0...3) of the key to be deleted
+
+Command Values
+ keyIndex = 0, 1,2, 3 Key to delete
+
+Reset Value
+ None
+
+Restrictions
+ The host should not delete a key that is currently in use by the AR6000.
+
+See Also
+ \93ADD_CIPHER_KEY\94
+
+=====================================================================
+
+Name
+ DELETE_PSTREAM
+
+Synopsis
+ The host uses this command to delete a prioritized data endpoint created by a
+ previous \93CREATE_PSTREAM\94 command
+
+Command
+ --deleteqos <trafficClass> <tsid>, where:
+
+ <traffic class>
+ = 0 BE
+ = 1 BK
+ = 2 VI
+ = 3 VO
+ <tsid>
+ The TSpec ID; use the -qosqueue option
+ to get the active TSpec IDs for each traffic class
+
+Command Parameters
+ A_UINT8 trafficClass Indicate the traffic class of the stream
+ being deleted
+
+Command Values
+ {
+ WMM_AC_BE = 0 Best effort
+ WMM_AC_BK = 1 Background
+ WMM_AC_VI = 2 Video
+ WMM_AC_VO = 3 Voice
+ } TRAFFIC CLASS
+
+ 0-15 for TSID
+
+Reply Values
+ N/A
+
+Restrictions
+ This command should only be issued after a \93CREATE_PSTREAM\94 command has
+ successfully created a prioritized stream
+
+See Also
+ \93CREATE_PSTREAM\94
+
+=====================================================================
+
+
+Name
+ DELETE_WOW_PATTERN
+
+Synopsis
+ The host uses this command to remove a pre-specified pattern from the
+ WoW pattern list.
+
+Command
+ wmiconfig
\96delwowpattern <list-id> <pattern-id>
+
+Command Parameters
+ A_UINT8 filter_list_id ID of the list that contains the WoW filter
+ pattern to delete
+ A_UINT8 filter_id ID of the WoW filter pattern to delete
+
+Reply Parameters
+ None
+
+
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+See Also
+ \93ADD_WOW_PATTERN\94
+
+=====================================================================
+
+
+Name
+ EXTENSION
+
+Synopsis
+ The WMI message interface is used mostly for wireless control messages to a wireless
+ module applicable to wireless module management regardless of the target platform
+ implementation. However, some commands only peripherally related to wireless
+ management are desired during operation. These wireless extension commands may
+ be platform-specific or implementation-dependent.
+
+Command
+ N/A
+
+Command Parameters
+ Command-specific
+
+Command Values
+ Command-specific
+
+Reply Parameters
+ Command-specific
+
+Reset Values
+ None defined
+
+Restrictions
+ None defined
+
+=====================================================================
+
+
+Name
+ GET_BIT_RATE
+
+Synopsis
+ Used by the host to obtain the rate most recently used by the AR6000 device
+
+Command
+ wmiconfig eth1 --getfixrates
+
+Command Parameters
+ None
+
+
+
+Reply Parameters
+ INT8
+ rateIndex
+ See the \93SET_BIT_RATE\94 command
+
+Reset Values
+ None
+
+Restrictions
+ This command should only be used during development/debug; it is not intended
+for use in production. It is only valid when the device is in the CONNECTED state
+
+See Also
+ \93SET_BIT_RATE\94
+
+=====================================================================
+
+
+Name
+ GET_CHANNEL_LIST
+
+Synopsis
+ Used by the host uses to retrieve the list of channels that can be used by the device
+ while in the current wireless mode and in the current regulatory domain.
+
+Command
+ TBD
+
+Command Parameters
+ None
+
+Reply Parameters
+ UINT8 reserved Reserved
+ UINT8 numberOfChannels Number of channels the reply contains
+ UINT16 channelList[numberOfChannels] Array of channel frequencies (in MHz)
+
+Reset Values
+ None defined
+
+Restrictions
+ The maximum number of channels that can be reported are 32
+
+=====================================================================
+
+
+Name
+ GET_FIXRATES
+
+Synopsis
+ Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by
+ running-average value. This command will clear the history and have a fresh start for
+ the running-average mechanism.
+
+Synopsis
+ This returns rate-mask set via WMI_SET_FIXRATES to retrieve the current fixed rate
+ that the AR6001 or AR6001 is using. See \93SET_FIXRATES\94.
+
+Command
+ wmiconfig eth1 --getfixrates
+
+Command Parameters
+ A_UINT16 fixRateMask; Note: if this command is used prior to
+ using WMI_SET_FIXRATES, AR6000
+ returns 0xffff as fixRateMask, indicating
+ all the rates are enabled
+
+Reply Parameters
+ None
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+See Also
+ \93SET_FIXRATES\94
+
+=====================================================================
+
+
+
+Name
+ GET_PMKID_LIST_CMD
+
+Synopsis
+ Retrieves the list of PMKIDs on the firmware. The
+ WMI_GET_PMKID_LIST_EVENT is generated by the firmware.
+
+Command
+ TBD
+
+Command Parameters
+
+Reset Values
+ None
+
+Restrictions
+ None
+
+See Also
+ SET_PMKID_LIST_CMD GET_PMKID_LIST_EVENT
+
+=====================================================================
+
+
+Name
+ GET_ROAM_TBL
+
+Synopsis
+ Retrieve the roaming table maintained on the target. The response is reported
+ asynchronously through the ROAM_TBL_EVENT.
+
+Command
+ wmiconfig --getroamtable <roamctrl> <info>
+
+Command Parameters
+ A_UINT8 roamCtrlType;
+ A_UINT16 roamMode
+ A_UINT16 numEntries
+ WMI_BSS_ROAM_INFO bssRoamInfo[1]
+
+Reply Value
+ Reported asynchronously through the ROAM_TBL_EVENT
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+See Also
+ SET_KEEPALIVE
+
+=====================================================================
+
+
+Name
+ GET_TARGET_STATS
+
+Synopsis
+ The host uses this command to request that the target send the statistics that it
+ maintains. The statistics obtained from the target are accrued in the host every time
+ the GET_TARGET_STATS command is issued. The --clearStats option is added to
+ clear the target statistics maintained in the host.
+
+Command
+ wmiconfig --getTargetStats --clearStats
+
+Command Parameters
+ TARGET_STATS targetStats
+ WMI_TARGET_STATS
+ UINT8 clearStats
+
+
+Reply Value
+ RSSI return value (0\96100)
+
+Reset Values
+ All statistics are cleared (zeroed)
+
+Restrictions
+ The --getTargetStats option must be used; the --clearStats option is also available also
+
+
+=====================================================================
+
+Name
+ GET_TX_PWR
+
+Synopsis
+ The host uses this command to retrieve the current Tx power level
+
+Command
+ wmiconfig -i eth1 --getpower
+
+Command Parameters
+ None
+
+Reply Parameters
+ UINT16 dbM The current Tx power level specified in dbM
+
+Reset Values
+ The maximum permitted by the regulatory domain
+
+Restrictions
+ None
+
+See Also
+ \93SET_TX_PWR\94
+
+=====================================================================
+
+
+Name
+ GET_WOW_LIST
+
+Synopsis
+ The host uses this command to retrieve the current list of WoW patterns.
+
+Command
+ wmiconfig \96getwowlist <list-id>
+
+Command Parameters
+ A_UINT8 filter_list_id ID of the list of WoW patterns to retrieve
+
+Reply Value(s)
+ A_UINT16 num_filters Number of WoW patterns contained in the list
+ A_UINT8 wow_mode Current mode of WoW (enabled or disabled)
+ A_UINT8 host_mode Current host mode (asleep or awake)
+ WOW_FILTER wow_filters[1]
+ Contents of the WoW filter pattern list
+ (contains mask, pattern, offset and size
+ information for each of the patterns)
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+See Also
+ \93SET_WSC_STATUS\94
+
+=====================================================================
+
+
+Name
+ LQ_THRESHOLD_PARAMS
+
+Synopsis
+ Sets Link Quality thresholds, the sampling will happen at every unicast data frame
+ Tx if a certain threshold is met, and the corresponding event will be sent to the host.
+
+Command
+ --lqThreshold <enable> <upper_threshold_1> ...
+ <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
+
+Command Parameters
+ <enable> = 0 Disable link quality sampling
+ = 1 Enable link quality sampling
+ <upper_threshold_x> Above thresholds (value in [0,100]), in
+ ascending order
+ <lower_threshold_x> Below thresholds (value in [0,100]), in
+ ascending order
+
+Command Values
+ See command parameters
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ OPT_TX_FRAME
+
+Synopsis
+ Special feature, sends a special frame.
+
+Command
+ wmiconfig --sendframe <frmType> <dstaddr> <bssid> <optIEDatalen>
+ <optIEData>
+
+Command Parameters
+ {
+ A_UINT16 optIEDataLen;
+ A_UINT8 frmType;
+ A_UINT8 dstAddr[ATH_MAC_LEN];
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT8 optIEData[1];
+ } WMI_OPT_TX_FRAME_CMD;
+
+Command Values
+ <frmtype> = 1 Probe request frame
+ = 2 Probe response frame
+ = 3 CPPP start
+ = 4 CPPP stop
+
+Reset Value
+ None defined
+
+Restrictions
+ Send a special frame only when special mode is on.
+
+=====================================================================
+
+
+Name
+ RECONNECT
+
+Synopsis
+ This command requests a reconnection to a BSS to which the AR6000 device was
+ formerly connected
+
+Command
+ TBD
+
+Command Parameters
+ UINT16 channel Provides a hint as to which channel was
+ used for a previous connection
+ UINT8 bssid[6] If set, indicates which BSSID to connect to
+
+Command Values
+ None
+
+Reset Values
+ None
+
+Restrictions
+ None
+
+See Also
+ \93CONNECT_CMD\94
+
+=====================================================================
+
+
+Name
+ RSSI_THRESHOLD_PARAMS
+
+Synopsis
+ Configures how the AR6000 device monitors and reports signal strength (RSSI) of the
+ connected BSS, which is used as a link quality metric. The four RSSI threshold sets (in
+ dbM) of the host specification divide the signal strength range into six segments.
+ When signal strength increases or decreases across one of the boundaries, an
+ RSSI_THRESHOLD event is signaled to the host. The host may then choose to take
+ action (such as influencing roaming).
+
+Command
+ wmiconfig eth1 --rssiThreshold <weight> <pollTime>
+ <above_threshold_val_1> ... <above_threshold_tag_6>
+ <above_threshold_val_6>
+ <below_threshold_tag_1> <below_threshold_val_1> ...
+ <below_threshold_tag_6> <below_threshold_val_6>
+
+Command Parameters
+ UINT8 weight Range in [1, 16] used to calculate average RSSI
+ UINT32 pollTime RSSI (signal strength) sampling frequency in
+ seconds (if pollTime = 0, single strength
+ sampling is disabled)
+ USER_RSS__THOLD tholds[12] Thresholds (6 x 2)
+
+Command Values
+ None defined
+
+Reset Values
+ pollTime is 0, and sampling is disabled
+
+Restrictions
+ Can only be issued if the AR6000 device is connected
+
+
+=====================================================================
+
+Name
+ SCAN_PARAMS
+
+Synopsis
+ The minact parameter determines the minimum active channel dwell time, within
+ which if the STA receives any beacon, it remains on that channel until the maxact
+ channel dwell time. If the STA does not receive a beacon within the minact dwell
+ time, it switches to scan the next channel.
+
+Command
+ wmiconfig -scan -minact=<ms> --maxact=<ms>
+
+Command Parameters
+ UINT16 maxact Channel dwell time (in ms), default = 0
+ UINT16 minact Channel dwell time (in ms), default = 105
+
+Command Values
+ See channel parameters
+
+Reset Values
+ None defined
+
+Restrictions
+ The minact value should be greater than 0; maxact should be between 5\9665535 ms
+ and greater than minact
+
+=====================================================================
+
+
+Name
+ SET_ACCESS_PARAMS
+
+Synopsis
+ Allows the host to set access parameters for the wireless network. A thorough
+ understanding of IEEE 802.11 is required to properly manipulate these parameters.
+
+Command
+ wmiconfig eth1 --acparams --txop <limit> --cwmin <0-15>
+ --cwmax <0-15> --aifsn<0-15>
+
+Command Parameters
+ UINT16 txop The maximum time (expressed in units of
+ 32 ms) the device can spend transmitting
+ after acquiring the right to transmit
+ UINT8 eCWmin Minimum contention window
+ UINT8 eCWmax Maximum contention window
+ UINT8 aifsn The arbitration inter-frame space number
+
+Command Values
+ None
+
+Reset Values
+ Reasonable defaults that vary, between endpoints (prioritized streams)
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_ADHOC_BSSID
+
+Synopsis
+ Allows the host to set the BSSID for an ad hoc network. If a network with this BSSID
+ is not found, the target creates an ad hoc network with this BSSID after the connect
+ WMI command is triggered (e.g., by the SIOCSIWESSID IOCTL).
+
+Command
+ wmiconfig eth1 --adhocbssid <bssid>
+
+Command Parameters
+ A_UINT8 bssid[ATH_MAC_LEN] BSSID is specified in xx:xx:xx:xx:xx:xx format
+
+Command Values
+ None
+
+Reset Values
+ None
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_AKMP_PARAMS
+
+Synopsis
+ Enables or disables multi PMKID mode.
+
+Command
+ wmiconfig eth1 --setakmp --multipmkid=<on/off>
+
+Command Parameters
+ typedef struct {
+ A_UINT32 akmpInfo;
+ } WMI_SET_AKMP_PARAMS_CMD;
+
+Command Values
+ akmpInfo;
+ bit[0] = 0
+ MultiPMKID mode is disabled and PMKIDs that
+ were set using the WMI_SET_PMKID_CMD are
+ used in the [Re]AssocRequest frame.
+ bit[0] = 1
+ MultiPMKID mode is enabled and PMKIDs issued
+ by the WMI_SET_PMKID_LIST_CMD are used in
+ the next [Re]AssocRequest sent to the AP.
+
+Reset Values
+ MultiPMKID mode is disabled
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_APPIE
+
+Synopsis
+ Add an application-specified IE to a management frame. The maximum length is
+ 76 bytes. Including the length and the element ID, this translates to 78 bytes.
+
+Command
+ wmiconfig --setappie <frame> <IE>, where:
+
+ frame
+ One of beacon, probe, respon, assoc
+
+ IE
+ A hex string beginning with DD (if = 0, no
+ IE is sent in the management frame)
+
+Command Parameters
+ mgmtFrmType;
+ A WMI_MGMT_FRAME_TYPE
+
+ ieLen;
+ Length of the IE to add to the GMT frame
+
+Command Values
+ None
+
+Reset Value
+ None defined
+
+Restrictions
+ Supported only for the probe request and association request management frame
+types. Also, only one IE can be added per management frame type.
+
+=====================================================================
+
+
+Name
+ SET_ASSOC_INFO
+
+Synopsis
+ The host uses this command to specify any information elements (IEs) it wishes the
+ AR6000 device to add to all future association and reassociation requests. IEs must be
+ correct and are used as is by the device. IEs specified through this command are
+ cleared with a DISCONNECT.
+
+Command
+ wmiconfig eth1 --setAssocIe <IE>
+
+Command Parameters
+ UINT8 ieType Used directly in 802.11 frames
+ UINT8 bufferSize Size of assocInfo (in bytes) ranging from
+ 0\96240. If = 0, previously set IEs are cleared.
+ UINT8 assocInfo[bufferSize] Used directly in 802.11 frames
+
+Command Values
+ None
+
+Reset Values
+ IEs are cleared
+
+Restrictions
+ This command can only be issued in the DISCONNECTED state
+
+=====================================================================
+
+
+Name
+ SET_AUTHMODE
+
+Synopsis
+ Sets the 802.11 authentication mode of reconnection
+
+Command
+ wmiconfig eth1 --setauthmode <mode>
+
+Command Parameters
+ UINT8 mode
+
+Command Values
+ mode = 0x00 Proceed with authentication during reconnect
+ = 0x01 Do not proceed with authentication during reconnect
+
+Reset Values
+ Authentication
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_BEACON_INT
+
+Synopsis
+ Sets the beacon interval for an ad hoc network. Beacon interval selection may have an
+ impact on power savings. To some degree, a longer interval reduces power
+ consumption but also decreases throughput. A thorough understanding of IEEE
+ 802.11 ad hoc networks is required to use this command effectively.
+
+Command
+ wmiconfig eth1 --ibssconintv
+
+Command Parameters
+ UINT16 beaconInterval Specifies the beacon interval in TU units (1024 ms)
+
+Command Values
+ None
+
+Reset Values
+ The default beacon interval is 100 TUs (102.4 ms)
+
+Restrictions
+ This command can only be issued before the AR6000 device starts an ad hoc network
+
+See Also
+ \93SET_IBSS_PM_CAPS\94
+
+=====================================================================
+
+
+Name
+ SET_BIT_RATE
+
+Synopsis
+ The host uses this command to set the AR6000 device to a specific fixed rate.
+
+Command
+ wmiconfig eth1 --setfixrates <rate_0> ... <rate_n>
+
+Command Parameters
+ INT8 rateIndex
+ A WMI_BIT_RATE value
+ {
+ RATE_AUTO = -1
+ RATE_1Mb = 0
+ RATE_2Mb = 1
+ RATE_5_5M = 2
+ RATE_11Mb = 3
+ RATE_6Mb = 4
+ RATE_9Mb = 5
+ RATE_12Mb = 6
+ RATE_18Mb = 7
+ RATE_24Mb = 8
+ RATE_36Mb = 9
+ RATE_48Mb = 10
+ RATE_54Mb = 11
+ } WMI_BIT_RATE
+
+
+Command Values
+ See command parameters
+
+Reset Values
+ The dynamic rate is determined by the AR6000 device
+
+Restrictions
+ This command is intended for use only during development/debug; it is not
+intended for use in production
+
+See Also
+ \93GET_BIT_RATE\94
+
+=====================================================================
+
+
+Name
+ SET_BMISS_TIME
+
+Synopsis
+ This command sets the beacon miss (BMISS) time, which the AR6000 hardware use
+ to recognize missed beacons. When an excessive number (15) of consecutive beacons
+ are missed, the AR6000 consider switching to a different BSS. The time can be
+ specified in number of beacons or in TUs.
+
+Command(s)
+ wmiconfig eth1 --setbmissbeacons=<val>
+ wmiconfig eth1 --setbmisstime=<val>
+
+Command Parameters
+ UINT16 bmissTime Specifies the beacon miss time
+ [1000...5000] in TUs (1024 ms)
+ UINT16 bmissbeacons Specifies the number of beacons [5...50]
+
+Command Values
+ None
+
+Reset Values
+ bmissTime is 1500 TUs (1536 ms)
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_BSS_FILTER
+
+Synopsis
+ The host uses this to inform the AR6000 device of the types of networks about which
+ it wants to receive information from the \93BSSINFO\94 event. As the device performs
+ either foreground or background scans, it applies the filter and sends \93BSSINFO\94
+ events only for the networks that pass the filter. If any of the bssFilter or the ieMask
+ filter matches, a BSS Info is sent to the host. The ieMask currently is used as a match
+ for the IEs in the beacons, probe reponses and channel switch action management
+ frame. See also \93Scan and Roam\94 on page C-1.
+
+ The BSS filter command has been enhanced to support IE based filtering. The IEs can
+ be specified as a bitmask through this command using this enum.
+
+Command
+ wmiconfig eth1 \96filter = <filter> --ieMask 0x<mask>
+
+Command Parameters
+ UINT8 BssFilter
+
+ Command Values
+ typedef struct {
+ A_UINT8 bssFilter; See WMI_BSS_FILTER
+ A_UINT32 ieMask;
+ } __ATTRIB_PACK WMI_BSS_FILTER_CMD;
+
+ The ieMask can take this combination of values:
+
+ enum {
+ BSS_ELEMID_CHANSWITCH = 0x01
+ BSS_ELEMID_ATHEROS = 0x02,
+ }
+
+Reply Value
+ None
+
+Reset Value
+ BssFilter = NONE_BSS_FILTER (0)
+
+Restrictions
+ None
+
+See Also
+ \93CONNECT_CMD\94
+
+=====================================================================
+
+
+Name
+ SET_BT_PARAMS
+
+Synopsis
+ This command is used to set the status of a Bluetooth stream or set Bluetooth
+ coexistence register parameters. The stream may be an SCO or an A2DP stream and
+ its status can be started/stopped/suspended/resumed.
+
+Command
+ wmiconfig
\96setBTparams <paramType> <params>
+
+Command Parameters
+ struct {
+ union {
+ BT_PARAMS_SCO scoParams;
+ BT_PARAMS_A2DP a2dpParams;
+ BT_PARAMS_MISC miscParams;
+ BT_COEX_REGS regs;
+ } info;
+ A_UINT8 paramType;
+ struct {
+ A_UINT8 noSCOPkts; Number of SCO packets between consecutive PS-POLLs
+ A_UINT8 pspollTimeout;
+ A_UINT8 stompbt;
+ } BT_PARAMS_SCO;
+ struct {
+ A2DP BT stream parameters
+ A_UINT32 period;
+ A_UINT32 dutycycle;
+ A_UINT8 stompbt;
+ } BT_PARAMS_A2DP;
+ struct {
+ union {
+ WLAN_PROTECT_POLICY_TYPE protectParams;
+ A_UINT16 wlanCtrlFlags;
+ }info;
+ A_UINT8 paramType;
+ } BT_PARAMS_MISC;
+ struct {
+ BT coexistence registers values
+ A_UINT32 mode; Coexistence mode
+ A_UINT32 scoWghts; WLAN and BT weights
+ A_UINT32 a2dpWghts;
+ A_UINT32 genWghts;
+ A_UINT32 mode2; Coexistence mode2
+ A_UINT8 setVal;
+ } BT_COEX_REGS;
+
+Command Values
+ None defined
+
+Reset Value
+ None
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_BT_STATUS
+
+Synopsis
+ Sets the status of a Bluetooth stream. The stream may be a SCO or an A2DP stream
+ and its status can be started/stopped/suspended/resumed.
+
+Command
+ wmiconfig \96setBTstatus <streamType> <status>
+
+Command Parameters
+ {
+ A_UINT8 streamType; Stream type
+ A_UINT8 status; Stream status
+ }WMI_SET_BT_STATUS_CMD;
+
+Command Values
+ {
+ BT_STREAM_UNDEF = 0
+ BT_STREAM_SCO
+ SCO stream
+ BT_STREAM_A2DP
+ A2DP stream
+ BT_STREAM_MAX
+ } BT_STREAM_TYPE;
+
+ {
+ BT_STATUS_UNDEF = 0
+ BT_STATUS_START
+ BT_STATUS_STOP
+ BT_STATUS_RESUME
+ BT_STATUS_SUSPEND
+ BT_STATUS_MAX
+ } BT_STREAM_STATUS;
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_CHANNEL_PARAMETERS
+
+Synopsis
+ Configures various WLAN parameters related to channels, sets the wireless mode,
+ and can restrict the AR6000 device to a subset of available channels. The list of
+ available channels varies depending on the wireless mode and the regulatory
+ domain. The device never operates on a channel outside of its regulatory domain. The
+ device starts to scan the list of channels right after this command.
+
+Command
+ wmiconfig eth1 --wmode <mode> <list>
+
+Command Parameters
+ UINT8 phyMode See Values below.
+ UINT8 numberOfChannels
+ Number of channels in the channel array that
+ follows. If = 0, then the device uses all of the
+ channels permitted by the regulatory domain
+ and by the specified phyMode.
+ UINT16 channel[numberOfChannels]
+ Array listing the subset of channels (expressed
+ as frequencies in MHz) the host wants the
+ device to use. Any channel not permitted by
+ the specified phyMode or by the specified
+ regulatory domain is ignored by the device.
+
+Command Values
+ phyMode = {
+ Wireless mode
+ 11a = 0x01
+ 11g = 0x02
+ 11ag = 0x03
+ 11b = 0x04
+ 11g only = 0x05
+ }
+
+Reset Values
+ phyMode
+ 11ag
+ 802.11a/g modules
+ 11g
+ 802.11g module
+ channels
+ Defaults to all channels permitted by the
+ current regulatory domain.
+
+Restrictions
+ This command, if issued, should be issued soon after reset and prior to the first
+ connection. This command should only be issued in the DISCONNECTED state.
+
+=====================================================================
+
+
+Name
+ SET_DISC_TIMEOUT
+
+Synopsis
+ The host uses this command to configure the amount of time that the AR6000 should
+ spend when it attempts to reestablish a connection after losing link with its current
+ BSS. If this time limit is exceeded, the AR6000 send a \93DISCONNECT\94 event. After
+ sending the \93DISCONNECT\94 event the AR6000 continues to attempt to reestablish a
+ connection, but they do so at the interval corresponding to a foreground scan as
+ established by the \93SET_SCAN_PARAMS\94 command.
+
+ A timeout value of 0 indicates that the AR6000 will disable all autonomous roaming,
+ so that the AR6000 will not perform any scans after sending a \93DISCONNECT\94
+ event to the host. The state is maintained until a shutdown or host sets different
+ timeout value from 0.
+
+Command
+ wmiconfig eth1 --disc=<timeout in seconds>
+
+Command Parameters
+ UINT8 disconnectTimeout
+ Specifies the time limit (in seconds) after
+ which a failure to reestablish a connection
+ results in a \93DISCONNECT\94 event
+
+Command Values
+ None
+
+Reset Values
+ disconnectTimeout is 10 seconds
+
+Restrictions
+ This command can only be issued while in a DISCONNECTED state
+
+=====================================================================
+
+
+Name
+ SET_FIXRATES
+
+Synopsis
+ By default, the AR6000 device uses all PHY rates based on mode of operation. If the
+ host application requires the device to use subset of supported rates, it can set those
+ rates with this command. In 802.11g mode, the AR6000 device takes the entire
+ 802.11g basic rate set and the rates specified with this command and uses it as the
+ supported rate set.
+
+ This rate set is advertised in the probe request and the assoc/re-assoc request as
+ supported rates. Upon successful association, the device modifies the rate set pool
+ using the: intersection of AP-supported rates with the union of the 802.11g basic rate
+ set and rates set using this command. The device picks transmission rates from this
+ pool based on a rate control algorithm.
+
+Command
+ TBD
+
+Command Parameters
+ A_UINT16 fixRateMask;
+ The individual bit is an index for rate table,
+ and setting the that index to 1 would set that
+ corresponding rate. E.g., fixRateMask = 9
+ (1001) sets 1 Mbps and 11 Mbps.
+
+Command Values
+ None
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+See Also
+ \93GET_FIXRATES\94
+
+=====================================================================
+
+
+Name
+ SET_WHAL_PARAM
+
+Synopsis
+ An internal AR6000 command that is used to set certain hardware parameters. The
+ description of this command is in $WORKAREA/include/halapi.h.
+
+Command
+ TBD
+
+Command Parameters
+ ATH_HAL_SETCABTO_CMDID
+ Sets the timeout waiting for the multicast
+ traffic after a DTIM beacon (in TUs).
+
+Command Values
+ None
+
+Reset Value
+ Default = 10 TUs
+
+Restrictions
+ This command should be executed before issuing a connect command.
+
+=====================================================================
+
+
+Name
+ SET_HOST_SLEEP_MODE
+
+Synopsis
+ The host uses this command to set the host mode to asleep or awake. All packets are
+ delivered to the host when the host mode is awake. When host mode is asleep, only if
+ WoW is enabled and the incoming packet matches one of the specified WoW
+ patterns, will the packet be delivered to the host. The host will also be woken up by
+ the target for pattern-matching packets and important events.
+
+Command
+ wmiconfig
\96sethostmode=<asleep/awake>
+
+Command Parameters
+ A_BOOL awake Set the host mode to awake
+ A_BOOL asleep Set the host mode to asleep
+
+Command Values
+ 1 = awake, 0 = asleep
+
+Reset Value
+ None defined (default host mode is awake)
+
+Restrictions
+ None
+
+
+=====================================================================
+
+Name
+ SET_IBSS_PM_CAPS
+
+Synopsis
+ Used to support a non-standard power management scheme for an ad hoc wireless
+ network consisting of up to eight stations (STAs) that support this form of power
+ saving (e.g., Atheros-based STAs). A thorough understanding of IEEE 802.11 ad hoc
+ networks is required to use this command effectively.
+
+Command
+ wmiconfig eth1 --ibsspmcaps --ps=<enable/disable>
+ --aw=<ATIM Windows in ms>
+ --ttl=<Time to live in number of beacon periods>
+ --to=<timeout in ms>
+
+Command Parameters
+ UINT8 power_saving
+ = 0
+ The non-standard power saving scheme is
+ disabled and maximum throughput (with no
+ power saving) is obtained.
+
+ = 1
+ Ad hoc power saving scheme is enabled (but
+ throughput may be decreased)
+
+ UINT16 atim_windows
+ Specifies the length (in ms) of the ad hoc traffic
+ indication message (ATIM) windows used in an ad
+ hoc network. All Atheros-based STAs that join the
+ network use this duration ATIM window.
+
+ The duration is communicated between wireless
+ STAs through an IE in beacons and probe responses.
+
+ The host sets atim_windows to control trade-offs
+ between power use and throughput. The value
+ chosen should be based on the beacon interval (see
+ the \93SET_BEACON_INT\94 command) on the
+ expected number of STAs in the IBSS, and on the
+ amount of traffic and traffic patterns between STAs.
+
+ UINT16 timeout_value
+ Specifies the timeout (in ms). The value is the same
+ for all ad hoc connections, but tracks separately for
+ each.
+
+ Applicable only for a beacon period and used to
+ derive actual timeout values on the Tx and Rx sides.
+ On the Tx side, the value defines a window during
+ which the STA accepts the frame(s) from the host for a
+ particular connection. Until closed, the window
+ restarts with every frame received from the host. On
+ the Rx side, indicates the time until which the STA
+ continues accepting frames from a particular
+ connection. The value resets with every frame
+ received. The value can be used to determine the
+ trade off between throughput and power.
+ Default = 10 ms
+
+ UINT8 ttl
+ Specifies the value in number of beacon periods. The
+ value is used to set a limit on the time until which a
+ frame is kept alive in the AR6001 before being
+ discarded. Default = 5
+
+Command Values
+ None
+
+Reset Values
+ By default, power_saving is enabled with atim_window = 20 ms
+
+Restrictions
+ Can only be issued before the AR6000 starts an ad hoc network
+
+See Also
+ \93SET_BEACON_INT\94
+
+=====================================================================
+
+
+
+Name
+ SET_LISTEN_INT
+
+Synopsis
+ The host uses this command to request a listen interval, which determines how often
+ the AR6000 device should wake up and listen for traffic. The listen interval can be set
+ by the TUs or by the number of beacons. The device may not be able to comply with
+ the request (e.g., if the beacon interval is greater than the requested listen interval, the
+ device sets the listen interval to the beacon interval). The actual listen interval used
+ by the device is available in the \93CONNECT\94 event.
+
+Command
+ wmiconfig eth1 --listen=<#of TUs, can range from 15 to 3000>
+
+ --listenbeacons=<#of beacons, can range from 1 to 50>
+
+Command Parameters
+ UINT16 listenInterval
+ Specifies the listen interval in Kms
+ (1024 ms), ranging from 100 to 1000
+
+ UINT16 listenbeacons
+ Specifies the listen interval in beacons,
+ ranging from 1 to 50
+
+Command Values
+ None
+
+Reset Values
+ The device sets the listen interval equal to the beacon interval of the AP it associates
+ to.
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_LPREAMBLE
+
+Synopsis
+ Overrides the short preamble capability of the AR6000 device
+
+Command
+ TBD
+
+Command Parameters
+ WMI_LPREAMBLE_DISABLED
+ The device is short-preamble capable
+
+ WMI_LPREAMBLE_ENABLED
+ The device supports only the long-
+ preamble mode
+
+Command Values
+ None
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+
+=====================================================================
+
+Name
+ SET_MAX_SP_LEN
+
+Synopsis
+ Set the maximum service period; indicates the number of packets the AR6001 can
+ receive from the AP when triggered
+
+Command
+ wmiconfig eth1 --setMaxSPLength <maxSPLen>
+
+Command Parameters
+ UINT8 maxSPLen
+ An APSD_SP_LEN_TYPE value
+
+Command Values
+ {
+ DELIVER_ALL_PKT = 0x0
+ DELIVER_2_PKT = 0x1
+ DELIVER_4_PKT = 0x2
+ DELIVER_6_PKT = 0x3
+ }APSD_SP_LEN_TYPE
+
+
+Reset Values
+ maxSPLen is DELIVER_ALL_PKT
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_OPT_MODE
+
+Synopsis
+ Special feature, sets the special mode on/off
+
+Command
+ wmiconfig eth1 --mode <mode>
+ Set the optional mode, where mode is special or off
+
+Command Parameters
+ enum {
+ SPECIAL_OFF
+ SPECIAL_ON
+ } OPT_MODE_TYPE;
+
+Command Values
+
+Reset Value
+ Mode = Off
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_PMKID
+
+Synopsis
+ The host uses this command to enable or disable a pairwise master key ID (PMKID)
+ in the AR6000 PMKID cache. The AR6000 clears its PMKID cache on receipt of a
+ DISCONNECT command from the host. Individual entries in the cache might be
+ deleted as the AR6000 detect new APs and decides to remove old ones.
+
+Command
+ wmiconfig eth1 --setbsspmkid --bssid=<aabbccddeeff>
+ --bsspmkid=<pmkid>
+
+Command Parameters
+ UINT8 bssid[6]
+ The MAC address of the AP that the
+ PMKID corresponds to (6 bytes in hex
+ format)
+
+ UINT8 enable
+ Either PMKID_DISABLE (0) to disable
+ the PMKID or PMKID_ENABLE (1) to
+ enable it (16 bytes in hex format)
+
+ UINT8 pmkid[16]
+ Meaningful only if enable is
+ PMKID_ENABLE, when it is the PMKID
+ that the AR6000 should use on the next
+ reassociation with the specified AP
+
+Command Values
+ enable
+ = 0 (disable), 1 (enable)
+ PKMID enabled/disabled
+
+Reset Values
+ None defined
+
+Restrictions
+ Only supported in infrastructure networks
+
+=====================================================================
+
+
+Name
+ SET_PMKID_LIST_CMD
+
+Synopsis
+ Configures the list of PMKIDs on the firmware.
+
+Command
+ wmiconfig --setpmkidlist --numpmkid=<n> --pmkid=<pmkid_1>
+ ... --pmkid=<pmkid_n>
+
+ Where n is the number of pmkids (maximum = 8) and pmkid_i is the ith pmkid (16
+ bytes in hex format)
+
+Command Parameters
+ {
+ A_UINT8 pmkid[WMI_PMKID_LEN];
+ } __ATTRIB_PACK WMI_PMKID;
+
+ {
+ A_UINT32 numPMKID;
+ WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE];
+ } __ATTRIB_PACK WMI_SET_PMKID_LIST_CMD;
+
+Command Values
+ None
+
+Reset Values
+ None
+
+Restrictions
+ Supported only in infrastructure modes
+
+=====================================================================
+
+
+Name
+ SET_POWER_MODE
+
+Synopsis
+ The host uses this command to provide the AR6000 device with guidelines on the
+ desired trade-off between power utilization and performance.
+
+ In normal power mode, the device enters a sleep state if they have nothing to do,
+ which conserves power but may cost performance as it can take up to 2 ms to
+ resume operation after leaving sleep state.
+
+ In maximum performance mode, the device never enters sleep state, thus no time
+ is spent waking up, resulting in higher power consumption and better
+ performance.
+
+Command
+ TBD
+
+Command Parameters
+ UINT8 powerMode
+ WMI_POWER_MODE value
+ {
+ REC_POWER = 1
+ (Recommended setting) Tries to conserve
+ power without sacrificing performance
+ MAX_PERF_POWER = 2
+ Setting that maximizes performance at
+ the expense of power
+
+ All other values are reserved
+ } WMI_POWER_MODE
+
+Command Values
+ See command parameters
+
+Reset Values
+ powerMode is REC_POWER
+
+Restrictions
+ This command should only be issued in the DISCONNECTED state for the
+ infrastructure network.
+
+ For a PM-disabled ad hoc network, the power mode should remain in
+ MAX_PERF_POWER.
+
+ For a PM-enabled ad hoc network, the device can have REC_POWER or
+ MAX_PERF_POWER set, but either way it must follow the power save ad hoc
+ protocol. The host can change power modes in the CONNECTED state.
+
+ Host changes to the PS setting when the STA is off the home channel take no effect
+ and cause a TARGET_PM_FAIL event.
+
+=====================================================================
+
+
+Name
+ SET_POWER_PARAMS
+
+Synopsis
+ The host uses this command to configure power parameters
+
+Command
+ wmiconfig eth1 --pmparams --it=<ms> --np=<number of PS POLL>
+ --dp=<DTIM policy: ignore/normal/stick>
+
+Command Parameters
+ UINT16 idle_period
+ Length of time (in ms) the AR6000 device
+ remains awake after frame Rx/Tx before going
+ to SLEEP state
+
+ UINT16 pspoll_number
+ The number of PowerSavePoll (PS-poll)
+ messages the device should send before
+ notifying the AP it is awake
+
+ UINT16 dtim_policy
+ A WMI_POWER_PARAMS_CMD value
+
+ {
+ IGNORE_DTIM =1
+ The device does not listen to any content after
+ beacon (CAB) traffic
+ NORMAL_DTIM = 2
+ DTIM period follows the listen interval (e.g., if
+ the listen interval is 4 and the DTIM period is 2,
+ the device wakes up every fourth beacon)
+ STICK_DTIM = 3
+ Device attempt to receive all CAB traffic (e.g., if
+ the DTIM period is 2 and the listen interval is 4,
+ the device wakes up every second beacon)
+ } WMI_POWER_PARAMS_CMD
+
+Command Parameters
+ See command parameters
+
+Reset Values
+ idle_period
+ 200 ms
+
+ pspoll_number
+ = 1
+
+ dtim_policy
+ = NORMAL_DTIM
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_POWERSAVE_PARAMS
+
+Synopsis
+ Set the two AR6000 power save timers (PS-POLL timer and APSD trigger timer) and
+ the two ASPD TIM policies
+
+Command
+ wmiconfig eth1--psparams --psPollTimer=<psPollTimeout in ms>
+ --triggerTimer=<triggerTimeout in ms> --apsdTimPolicy=<ignore/
+ adhere> --simulatedAPSDTimPolicy=<ignore/adhere>
+
+Command Parameters
+ typedef struct {
+ A_UINT16 psPollTimeout;
+ Timeout (in ms) after sending PS-POLL; the
+ AR6000 device sleeps if it does not receive a
+ data packet from the AP
+
+ A_UINT16 triggerTimeout;
+ Timeout (in ms) after sending a trigger; the
+ device sleeps if it does not receive any data
+ or null frame from the AP
+
+ APSD_TIM_POLICY apsdTimPolicy;
+ TIM behavior with queue APSD enabled
+
+ APSD_TIM_POLICY simulatedAPSD
+
+ TimPolicy;
+ TIM behavior with simulated APSD
+ enabled
+
+ typedef enum {
+ IGNORE_TIM_ALL_QUEUES_APSD = 0,
+ PROCESS_TIM_ALL_QUEUES_APSD = 1,
+ IGNORE_TIM_SIMULATED_APSD = 2,
+ POWERSAVE_TIMERS_POLICY = 3,
+ } APSD_TIM_POLICY;
+
+Command Values
+ None
+
+Reset Values
+ psPollTimeout is 50 ms; triggerTimeout is 10 ms;
+ apsdTimPolicy = IGNORE_TIM_ALL_QUEUES_APSD;
+ simulatedAPSDTimPolicy = POWERSAVE_TIMERS_POLICY
+
+Restrictions
+ When this command is used, all parameters must be set; this command does not
+ allow setting only one parameter.
+
+=====================================================================
+
+
+Name
+ SET_PROBED_SSID
+
+Synopsis
+ The host uses this command to provide a list of up to MAX_PROBED_SSID_INDEX
+ (six) SSIDs that the AR6000 device should actively look for. It lists the active SSID
+ table. By default, the device actively looks for only the SSID specified in the
+ \93CONNECT_CMD\94 command, and only when the regulatory domain allows active
+ probing. With this command, specified SSIDs are probed for, even if they are hidden.
+
+Command
+ wmiconfig eth1 --ssid=<ssid> [--num=<index>]
+
+Command Parameters
+ {
+ A_UINT8 numSsids
+ A number from 0 to
+ MAX_PROBED_SSID_INDEX indicating
+ the active SSID table entry index for this
+ command (if the specified entry index
+ already has an SSID, the SSID specified in
+ this command replaces it)
+
+ WMI_PROBED_SSID_INFO probedSSID[1]
+ } WMI_PROBED_SSID_CMD
+
+ {
+ A_UINT8 flag
+ WMI_SSID_FLAG indicates the current
+ entry in the active SSID table
+ A_UINT8 ssidLength
+ Length of the specified SSID in bytes.
+ If = 0, the entry corresponding to the
+ index is erased
+ A_UINT8 ssid[32]
+ SSID string actively probed for when
+ permitted by the regulatory domain
+ } WMI_PROBED_SSID_INFO
+
+Command Values
+ WMI_SSID_FLAG
+ {
+ DISABLE_SSID_FLAG = 0
+ Disables entry
+ SPECIFIC_SSID_FLAG = 1
+ Probes specified SSID
+ ANY_SSID_FLAG = 2
+ Probes for any SSID
+ } WMI_SSID_FLAG
+
+Reset Value
+ The entries are unused.
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_REASSOC_MODE
+
+Synopsis
+ Specify whether the disassociated frame should be sent or not upon reassociation.
+
+Command
+ wmiconfig eth1 --setreassocmode <mode>
+
+Command Parameters
+ UINT8 mode
+
+Command Values
+ mode
+ = 0x00
+ Send disassoc to a previously connected AP
+ upon reassociation
+ = 0x01
+ Do not send disassoc to previously connected
+ AP upon reassociation
+
+Reset Values
+ None defined
+
+Restrictions
+ None
+
+
+=====================================================================
+
+Name
+ SET_RETRY_LIMITS
+
+Synopsis
+ Allows the host to influence the number of times that the AR6000 device should
+ attempt to send a frame before they give up.
+
+Command
+ wmiconfig --setretrylimits <frameType> <trafficClass> <maxRetries>
+ <enableNotify>
+
+Command Parameters
+ {
+ UINT8 frameType
+ A WMI_FRAMETYPE specifying
+ which type of frame is of interest.
+ UINT8 trafficClass
+ Specifies a traffic class (see
+ \93CREATE_PSTREAM\94). This
+ parameter is only significant when
+ frameType = DATA_FRAMETYPE.
+ UINT8 maxRetries
+ Maximum number of times the
+ device attempts to retry a frame Tx,
+ ranging from WMI_MIN_RETRIES
+ (2) to WMI_MAX_RETRIES (15). If
+ the special value 0 is used,
+ maxRetries is set to 15.
+ A_UINT8 enableNotify
+ Notify when enabled
+ } WMI_RETRY_LIMIT_INFO
+
+ {
+ A_UINT8 numEntries
+ WMI_RETRY_LIMIT_INFO retryLimitInfo[1]
+ } WMI_SET_RETRY_LIMITS_CMD
+
+Command Values
+ {
+ MGMT_FRAMETYPE = 0 Management frame
+ CONTROL_FRAMETYPE = 1 Control frame
+ DATA_FRAMETYPE = 2 Data frame
+ } WMI_FRAMETYPE
+
+Reset Values
+ Retries are set to 15
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_ROAM_CTRL
+
+Synopsis
+ Affects how the AR6000 device selects a BSS. The host uses this command to set and
+ enable low RSSI scan parameters. The time period of low RSSI background scan is
+ mentioned in scan period. Low RSSI scan is triggered when the current RSSI
+ threshold (75% of current RSSI) is equal to or less than scan threshold.
+
+ Low RSSI roam is triggered when the current RSSI threshold falls below the roam
+ threshold and roams to a better AP by the end of the scan cycle. During Low RSSI
+ roam, if the STA finds a new AP with an RSSI greater than roam RSSI to floor, during
+ scan, it roams immediately to it instead of waiting for the end of the scan cycle. See
+ also \93Scan and Roam\94 on page C-1.
+
+Command
+ wmiconfig --roam <roamctrl> <info>, where info is <scan period>
+ <scan threshold> <roam threshold> <roam rssi floor>
+
+Command Parameters
+ A_UINT8 roamCtrlType;
+
+Command Values
+ WMI_FORCE_ROAM = 1
+ Roam to the specified BSSID
+
+ WMI_SET_ROAM_MODE = 2
+ Default, progd bias, no roam
+
+ WMI_SET_HOST_BIAS = 3
+ Set the host bias
+
+ WMI_SET_LOWRSSI_SCAN_PARAMS = 4
+ Info parameters
+
+ A_UINT8 bssid[ATH_MAC_LEN];
+ WMI_FORCE_ROAM
+
+ A_UINT8 roamMode;
+ WMI_SET_ROAM_MODE
+
+ A_UINT8 bssBiasInfo;
+ WMI_SET_HOST_BIAS
+
+ A_UINT16 lowrssi_scan_period;
+ WMI_SET_LOWRSSI_SCAN_PARAMS
+
+ A_INT16
+ lowrssi_scan_threshold;
+ WMI_SET_LOWRSSI_SCAN_PARAMS
+
+ A_INT16 lowrssi_roam_threshold;
+ WMI_SET_LOWRSSI_SCAN_PARAMS
+
+ A_UINT8 roam_rssi_floor;
+ WMI_SET_LOWRSSI_SCAN_PARAMS
+
+Reset Value
+ None defined (default lowrssi scan is disabled. Enabled only when scan period is set.)
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_RTS
+
+Synopsis
+ Decides when RTS should be sent.
+
+Command
+ wmiconfig eth1 --setRTS <pkt length threshold>
+
+Command Parameters
+ A_UINT16
+ threshold;
+ Command parameter threshold in bytes. An RTS is
+ sent if the data length is more than this threshold.
+ The default is to NOT send RTS.
+
+Command Values
+ None
+
+Reset Value
+ Not to send RTS.
+
+Restrictions
+ None
+
+
+=====================================================================
+
+Name
+ SET_SCAN_PARAMS
+
+Synopsis
+ The host uses this command to set the AR6000 scan parameters, including the duty
+ cycle for both foreground and background scanning. Foreground scanning takes
+ place when the AR6000 device is not connected, and discovers all available wireless
+ networks to find the best BSS to join. Background scanning takes place when the
+ device is already connected to a network and scans for potential roaming candidates
+ and maintains them in order of best to worst. A second priority of background
+ scanning is to find new wireless networks.
+
+ The device initiates a scan when necessary. For example, a foreground scan is always
+ started on receipt of a \93CONNECT_CMD\94 command or when the device cannot find
+ a BSS to connect to. Foreground scanning is disabled by default until receipt of a
+ CONNECT command. Background scanning is enabled by default and occurs every
+ 60 seconds after the device is connected.
+
+ The device implements a binary backoff interval for foreground scanning when it
+ enters the DISCONNECTED state after losing connectivity with an AP or when a
+ CONNECT command is received. The first interval is ForegroundScanStartPeriod,
+ which doubles after each scan until the interval reaches ForegroundScanEndPeriod.
+ If the host terminates a connection with DISCONNECT, the foreground scan period
+ is ForegroundScanEndPeriod. All scan intervals are measured from the time a full
+ scan ends to the time the next full scan starts. The host starts a scan by issuing a
+ \93START_SCAN\94 command. See also \93Scan and Roam\94 on page C-1.
+
+Command
+ wmiconfig eth1 --scan --fgstart=<sec> --fgend=<sec> --bg=<sec> --
+ act=<msec> --pas=<msec> --sr=<short scan ratio> --scanctrlflags
+ <connScan> <scanConnected> <activeScan> <reportBSSINFO>
+
+Command Parameters
+ UINT16 fgStartPeriod
+ First interval used by the device when it
+ disconnects from an AP or receives a
+ CONNECT command, specified in seconds (0\96
+ 65535). If = 0, the device uses the reset value.
+ If = 65535, the device disables foreground
+ scanning.
+
+ UINT16 fgEndPeriod
+ The maximum interval the device waits between
+ foreground scans specified in seconds (from
+ ForegroundScanStartPeriod to 65535). If = 0, the
+ device uses the reset value.
+
+ UINT16 bgScanPeriod
+ The period of background scan specified in
+ seconds (0\9665535). By default, it is set to the reset
+ value of 60 seconds. If 0 or 65535 is specified, the
+ device disables background scanning.
+
+ UINT16 maxactChDwellTime
+ The period of time the device stays on a
+ particular channel while active scanning. It is
+ specified in ms (10\9665535). If the special value of
+ 0 is specified, the device uses the reset value.
+
+ UINT16 PasChDwellTime
+ The period of time the device remains on a
+ particular channel while passive scanning. It is
+ specified in ms (10\9665535). If the special value of
+ 0 is specified, the device uses the reset value.
+
+ UINT8 shortScanRatio
+ Number of short scans to perform for each
+ long scan.
+
+ UINT8 scanCtrlFlasgs
+
+ UINT16 minactChDwellTime
+ Specified in ms
+
+ UINT32 maxDFSchActTime
+ The maximum time a DFS channel can stay
+ active before being marked passive, specified in
+ ms.
+
+Command Values
+ None
+
+Reset Values
+ ForegroundScanStart
+Period
+ 1 sec
+
+ ForegroundScanEndPeriod
+ 60 sec
+
+ BackgroundScanPeriod
+ 60 sec
+
+ ActiveChannelDwellTime
+ 105 ms
+
+=====================================================================
+
+
+Name
+ SET_TKIP_COUNTERMEASURES
+
+Synopsis
+ The host issues this command to tell the target whether to enable or disable TKIP
+ countermeasures.
+
+Command
+ TBD
+
+Command Parameters
+ UINT8 WMI_TKIP_CM_ENABLE
+ Enables the countermeasures
+
+
+ UINT8 TKIP_CM_DISABLE
+ Disables the countermeasures
+
+Command Values
+ None
+
+Reset Values
+ By default, TKIP MIC reporting is disabled
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_TX_PWR
+
+Synopsis
+ The host uses this command to specify the Tx power level of the AR6000. Cannot be
+ used to exceed the power limit permitted by the regulatory domain. The maximum
+ output power is limited in the chip to 31.5 dBm; the range is 0 \96 31.5 dbm.
+
+Command
+ wmiconfig --power <dbM>
+
+Command Parameters
+ UINT8 dbM
+ The desired Tx power specified in dbM.
+ If = 0, the device chooses the maximum
+ permitted by the regulatory domain.
+
+Command Values
+ None
+
+Reset Values
+ The maximum permitted by the regulatory domain
+
+Restrictions
+ None
+
+See Also
+ \93GET_TX_PWR\94
+
+
+=====================================================================
+
+Name
+ SET_VOICE_PKT_SIZE
+
+Synopsis
+ If an AP does not support WMM, it has no way to differentiate voice from data.
+ Because the voice packet is typically small, packet in size less than voicePktSize are
+ assumed to be voice, otherwise it is treated as data.
+
+Command
+ wmiconfig eth1 --setVoicePktSize <size-in-bytes>
+
+Command Parameters
+ UINT16 voicePktSize
+ Packet size in octets
+
+Command Values
+ None
+
+Reset Values
+ voicePktSize default is 400 bytes
+
+Restrictions
+ No effect if WMM is unavailable
+
+
+=====================================================================
+
+Name
+ SET_WMM
+
+Synopsis
+ Overrides the AR6000 device WMM capability
+
+Command
+ wmiconfig eth1 --setwmm <enable>
+
+Command Parameters
+ WMI_WMM_ENABLED
+ Enables WMM
+
+ WMI_WMM_DISABLED
+ Disables WMM support
+
+Command Values
+ 0 = disabled
+ 1 = enabled
+
+Reset Value
+ WMM Disabled
+
+Restrictions
+ None
+
+
+=====================================================================
+
+Name
+ SET_WMM_TXOP
+
+Synopsis
+ Configures TxOP Bursting when sending traffic to a WMM capable AP
+
+Command
+ wmiconfig eth1 --txopbursting <burstEnable>
+
+ <burstEnable>
+ = 0
+ Disallow TxOp bursting
+
+ = 1
+ Allow TxOp bursting
+
+Command Parameters
+ txopEnable
+ = WMI_TXOP_DISABLED
+ Disabled
+
+ = WMI_TXOP_ENABLED
+ Enabled
+
+Command Values
+ txopEnable
+ = 0 Disabled
+
+ = 1 Enabled
+
+Reset Value
+ Bursting is off by default
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ SET_WOW_MODE
+
+Synopsis
+ The host uses this command to enable or disable the WoW mode. When WoW mode
+ is enabled and the host is asleep, pattern matching takes place at the target level.
+ Only packets that match any of the pre-specified WoW filter patterns, will be passed
+ up to the host. The host will also be woken up by the target. Packets which do not
+ match any of the WoW patterns are discarded.
+
+Command
+ wmiconfig \96setwowmode <enable/disable>
+
+Command Parameters
+ A_BOOL enable_wow
+ Enable or disable WoW:
+
+Command Values
+ = 0
+ Disable WoW
+
+ = 1
+ Enable WoW
+
+Reset Value
+ None defined (default WoW mode is disabled).
+
+Restrictions
+ None
+
+See Also
+ \93GET_WOW_LIST\94
+
+
+=====================================================================
+
+Name
+ SET_WSC_STATUS
+
+Synopsis
+ The supplicant uses this command to inform the target about the status of the WSC
+ registration protocol. During the WSC registration protocol, a flag is set so the target
+ bypasses some of the checks in the CSERV module. At the end of the registration, this
+ flag is reset.
+
+Command
+ N/A
+
+Command Parameters
+ A_BOOL status
+ = 1 WSC registration in progress
+ = 0 WSC protocol not running
+
+Reply Parameters
+ None
+
+Reset Value
+ None defined (default = 0)
+
+Restrictions
+ None
+
+
+=====================================================================
+
+Name
+ SNR_THRESHOLD_PARAMS
+
+Synopsis
+ Configures how the AR6000 device monitors and reports SNR of the connected BSS,
+ used as a link quality metric.
+
+Command
+ --snrThreshold <weight> <upper_threshold_1> ...
+ <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4>
+ <pollTimer>
+
+Command Parameters
+ <weight>
+ Share with rssiThreshold. Range in [1, 16], used
+ in the formula to calculate average RSSI
+
+ <upper_threshold_x>
+ Above thresholds expressed in db, in ascending
+ order
+
+ <lower_threshold_x>
+ Below thresholds expressed in db, in ascending
+ order
+
+ <pollTimer>
+ The signal strength sampling frequency in
+ seconds. If polltime = 0, signal strength
+ sampling is disabled
+
+Command Values
+ None
+
+Reset Value
+ None defined
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ START_SCAN
+
+Synopsis
+ The host uses this command to start a long or short channel scan. All future scans are
+ relative to the time the AR6000 device processes this command. The device performs
+ a channel scan on receipt of this command, even if a scan was already in progress.
+ The host uses this command when it wishes to refresh its cached database of wireless
+ networks. The isLegacy field will be removed (0 for now) because it is achieved by
+ setting CONNECT_PROFILE_MATCH_DONE in the CONNECT command. See also
+ \93Scan and Roam\94
+
+Command
+ wmiconfig eth1 --startscan <scan type> <forcefgscan> 0
+ <homeDwellTime> <forceScanInterval>
+
+Command Parameters
+ UINT8 scanType
+ WMI_SCAN_TYPE
+
+Command Values
+ {
+ WMI_LONG_SCAN =0x0
+ Requests a full scan
+ WMI_SHORT_SCAN =0x1
+ Requests a short scan
+ } WMI_SCAN_TYPE
+
+ A_BOOL forceFgScan
+ forceFgScan
+ = 0
+ Disable the foreground scan
+
+ forceFgScan
+ = 1
+ Forces a foreground scan
+
+ A_UINT32 homeDwellTime
+ Maximum duration in the home
+ channel (in ms)
+
+ A_UINT32 forceScanInterval
+ Time interval between scans (in ms)
+
+ A_UINT32 scanType
+ WMI_SCAN_TYPE
+
+Reset Value
+ Disable forcing foreground scan
+
+Restrictions
+ isLegacy field will no longer be supported (pass as 0 for now)
+
+
+=====================================================================
+
+Name
+ SYNCHRONIZE
+
+Synopsis
+ The host uses this command to force a synchronization point between the command
+ and data paths
+
+Command
+ TBD
+
+Command Parameters
+ None
+
+
+
+Command Values
+ None
+
+
+
+Reset Values
+ None
+
+
+
+Restrictions
+ None
+
+
+=====================================================================
+
+Name
+ TARGET_ERROR_REPORT_BITMASK
+
+Synopsis
+ Allows the host to control \93ERROR_REPORT\94 events from the AR6000 device.
+
+ If error reporting is disabled for an error type, a count of errors of that type is
+ maintained by the device.
+
+ If error reporting is enabled for an error type, an \93ERROR_REPORT\94 event is
+ sent when an error occurs and the error report bit is cleared.
+
+ Error counts for each error type are available through the \93GET_TARGET_STATS\94
+ command.
+
+Command
+ wmiconfig eth1 --setErrorReportingBitmask
+
+Command Parameters
+ UINT32 bitmask
+ Represents the set of
+ WMI_TARGET_ERROR_VAL error types
+ enabled for reporting
+
+Command Values
+ {
+ WMI_TARGET_PM_ERR_FAIL = 0x00000001
+ Power save fails (only two cases):
+ Retry out of null function/QoS null
+ function to associated AP for PS
+ indication'
+ Host changes the PS setting when
+ STA is off home channel
+
+ WMI_TARGET_KEY_NOT_FOUND = 0x00000002
+ No cipher key
+ WMI_TARGET_DECRYPTION_ERR = 0x00000004
+ Decryption error
+ WMI_TARGET_BMISS = 0x00000008
+ Beacon miss
+ WMI_PSDISABLE_NODE_JOIN = 0x00000010
+ A non-PS-enabled STA joined the
+ PS-enabled network
+ WMI_TARGET_COM_ERR = 0x00000020
+ Host/target communication error
+ WMI_TARGET_FATAL_ERR = 0x00000040
+ Fatal error
+ } WMI_TARGET_ERROR_VAL
+
+Reset Values
+ Bitmask is 0, and all error reporting is disabled
+
+Restrictions
+ None
+
+
+=====================================================================
+WMI Events
+
+Event
+ Description
+ Page
+
+
+BSSINFO
+ Contains information describing BSSs collected during a scan
+
+CAC_EVENTID
+ Indicates signalling events in admission control
+
+CMDERROR
+ The AR6000 device encounters an error while attempting to process
+ a command
+
+CONNECT
+ The device has connected to a wireless network
+
+DISCONNECT
+ The device lost connectivity with a wireless network
+
+ERROR_REPORT
+ An error has occurred for which the host previously requested
+ notification with the command
+ \93TARGET_ERROR_REPORT_BITMASK\94
+
+EXTENSION
+ WMI extension event
+
+GET_PMKID_LIST_EVENT
+ Created in response to a \93GET_PMKID_LIST_CMD\94 command
+
+GET_WOW_LIST_EVENT
+ Response to the wmiconfig \93GET_WOW_LIST\94 command to
+ retrieve the configured WoW patterns
+
+NEIGHBOR_REPORT
+ Neighbor APs that match the current profile were detected
+
+OPT_RX_FRAME_EVENT
+ (Special feature) informs the host of the reception of a special frame
+
+PSTREAM_TIMEOUT
+ A prioritized stream has been idle for a specified interval
+
+READY
+ The AR6000 device is ready to accept commands
+
+REGDOMAIN
+ The regulatory domain has changed
+
+REPORT_ROAM_DATA_EVENT
+ Reports the roam time calculations made by the device
+ (generated with a special build)
+ \97
+
+REPORT_STATISTICS
+ Reply to a \93GET_TARGET_STATS\94 command
+
+ROAM_TBL_EVENT
+ Reports the roam table
+
+RSSI_THRESHOLD
+ Signal strength from the connected AP has crossed the threshold
+ defined in the \93RSSI_THRESHOLD_PARAMS\94 command
+
+SCAN_COMPLETE_EVENT
+ A scan has completed (added status SCAN_ABORTED in release 2.0)
+
+TEST_EVENT
+ Event generated by the TCMD
+
+TKIP_MICERROR
+ TKIP MIC errors were detected
+
+=====================================================================
+
+Name
+ BSSINFO
+
+Synopsis
+ Contains information describing one or more BSSs as collected during a scan.
+ Information includes the BSSID, SSID, RSSI, network type, channel, supported rates,
+ and IEs. BSSINFO events are sent only after the device receives a beacon or probe-
+ response frame that pass the filter specified in the \93SET_BSS_FILTER\94 command.
+ BSSINFO events consist of a small header followed by a copy of the beacon or probe
+ response frame. The 802.11 header is not present. For formats of beacon and probe-
+ response frames please consult the IEEE 802.11 specification.
+
+ The beacons or probe responses containing the IE specified by the
+ WMI_BSS_FILTER_CMD are passed to the host through the
+ WMI_BSSINFO_EVENT. The event carries a 32-bit bitmask that indicates the IEs that
+ were detected in the management frame. The frame type field has been extended to
+ indicate action management frames. This would be helpful to route these frames
+ through the same event mechanism as used by the beacon processing function.
+
+ If the bssFilter in the SET_BSS_FILTER matches, then the ieMask is not relevant
+ because the BSSINFO event is sent to the host. If the bssFilter doesnot match in the
+ beacons/probe respones, then the ieMask match dictates whether the BSSINFO
+ event is sent to the host. In the case of action management frames, the ieMask is the
+ filter that is applied.
+
+Event ID
+ 0x1004
+
+Event Parameters
+ typedef struct {
+ A_UINT16 channel;
+ Specifies the frequency (in MHz) where the
+ frame was received
+ A_UINT8 frameType;
+ A WMI_BI_FTYPE value
+ A_UINT8 snr;
+ A_INT16 rssi;
+ Indicates signal strength
+ A_UINT8 bssid[ATH_MAC_LEN];
+ A_UINT32 ieMask;
+ } _ATTRIB_PACK_WMI_BSS_INFO_HDR;
+
+ Beacon or Probe Response Frame
+
+Event Values
+ {
+ BEACON_FTYPE = 0x1
+ Indicates a beacon frame
+ PROBERESP_FTYPE
+ Indicates a probe response frame
+ ACTION_MGMT_FTYPE
+ } WMI_BI_FTYPE
+
+=====================================================================
+
+Name
+ CAC_EVENTID
+
+Synopsis
+ Indicates signalling events in admission control. Events are generated when
+ admission is accepted, rejected, or deleted by either the host or the AP. If the AP does
+ not respond to an admission request within a timeout of 500 ms, an event is
+ generated to the host.
+
+Event ID
+ 0x1011
+
+Event Parameters
+ UINT8
+ ac
+ Access class pertaining to the
+signalling
+
+ UINT8 cac_indication
+ Type of indication; indications are
+ listed in WMI_CAC_INDICATION
+
+ UINT8 statusCode
+ AP response status code for a
+ request
+
+ UINT8 tspecSuggestion[63]
+ Suggested TSPEC from AP
+
+Event Values
+ {
+ CAC_INDICATION_ADMISSION = 0x00
+ CAC_INDICATION_ADMISSION_RESP = 0x01
+ CAC_INDICATION_DELETE = 0x02
+ CAC_INDICATION_NO_RESP = 0x03
+ } WMI_CAC_INDICATION
+
+
+=====================================================================
+
+
+Name
+ CMDERROR
+
+Synopsis
+ Indicates that the AR6000 device encountered an error while attempting to process a
+ command. This error is fatal and indicates that the device requires a reset.
+
+Event ID
+ 0x1005
+
+Event Parameters
+ UINT16 commandId
+ Corresponds to the command which generated
+ the error
+ UINT8 errorCode
+ A WMI_ERROR_CODE value
+
+Event Values
+ {
+ INVALID_PARAM = 1
+ Invalid parameter
+ ILLEGAL_STATE = 2
+ Illegal state
+ INTERNAL_ERROR = 3
+ Internal Error
+ All other values reserved
+ } WMI_ERROR_CODE
+
+
+=====================================================================
+
+
+Name
+ CONNECT
+
+Synopsis
+ Signals that the AR6000 connected to a wireless network. Connection occurs due to a
+ \93CONNECT\94 command or roaming to a new AP. For infrastructure networks, shows
+ that the AR6000 successfully performed 802.11 authentication and AP association.
+
+Event ID
+ 0x1002
+
+Event Parameters
+ UINT16 channel
+ Channel frequency (in MHz) of the network the
+ AR6000 are connected to
+
+ UINT8 bssid[6]
+ MAC address of the AP the AR6000 are
+ connected to or the BSSID of the ad hoc
+ network
+
+ UINT16 listenInterval
+ Listen interval (in Kms) that the AR6000 are
+ using
+
+ UINT 8 beaconIeLen
+ Length (in bytes) of the beacon IEs
+
+ UINT8 assocInfo
+ Pointer to an array containing beacon IEs,
+ followed first by association request IEs then by
+ association response IEs
+
+ UINT8 assocReqLen
+ Length (in bytes) of the assocReqIEs array
+
+ UINT8 assocRespLen
+ Length (in bytes) of the assocRespIEs array
+
+Event Values
+ None defined
+
+=====================================================================
+
+
+Name
+ DISCONNECT
+
+Synopsis
+ Signals that the AR6000 device lost connectivity with the wireless network.
+ DISCONENCT is generated when the device fails to complete a \93CONNECT\94
+ command or as a result of a transition from a connected state to disconnected state.
+
+ After sending the \93DISCONNECT\94 event the device continually tries to re-establish
+ a connection. A LOST_LINK occurs when STA cannot receive beacons within the
+ specified time for the SET_BMISS_TIME command.
+
+Event ID
+ 0x1003
+
+Event Parameters
+ UINT8 disconnect
+ Reason
+ A WMI_DISCONNECT_REASON value
+
+ UINT8 bssid[6]
+ Indicates which BSS the device was connected to
+
+ UINT8 assocRespLen
+ Length of the 802.11 association response frame
+ that triggered this event, or 0 if not applicable
+
+ UINT8 assocInfo[assocRespLen]
+ Copy of the 802.11 association response frame
+
+Event Values
+ {
+ NO_NETWORK_AVAIL =0x01
+ Indicates that the device was unable to
+ establish or find the desired network
+ LOST_LINK =0x02
+ Indicates the devices is no longer receiving
+ beacons from the BSS it was previously
+ connected to
+
+ DISCONNECT_CMD =0x03
+ Indicates a \93DISCONNECT\94 command was
+ processed
+ BSS_DISCONNECTED =0x04
+ Indicates the BSS explicitly disconnected the
+ device. Possible mechanisms include the AP
+ sending 802.11 management frames
+ (e.g., disassociate or deauthentication
+ messages).
+ AUTH_FAILED =0x05
+ Indicates that the device failed 802.11
+ authentication with the BSS
+ ASSOC_FAILED =0x06
+ Indicates that the device failed 802.11
+ association with the BSS
+ NO_RESOURCES_AVAIL =0x07
+ Indicates that a connection failed because the
+ AP had insufficient resources to complete the
+ connection
+ CSERV_DISCONNECT =0x08
+ Indicates that the device\92s connection services
+ module decided to disconnect from a BSS,
+ which can happen for a variety of reasons (e.g.,
+ the host marks the current connected AP as a
+ bad AP).
+ INVALID_PROFILE =0x0A
+ Indicates that an attempt was made to
+ reconnect to a BSS that no longer matches the
+ current profile
+ All other values are reserved
+ } WMI_DISCONNECT_REASON
+
+
+=====================================================================
+
+
+Name
+ ERROR_REPORT
+
+Synopsis
+ Signals that a type of error has occurred for which the host previously requested
+ notification through the \93TARGET_ERROR_REPORT_BITMASK\94 command.
+
+Event ID
+ 0x100D
+
+Event Parameters
+ UINT32 errorVal
+ WMI_TARGET_ERROR_VAL value. See
+ \93TARGET_ERROR_REPORT_BITMASK\94.
+
+Event Values
+ errorVal
+ = 0x00000001
+ Power save fails
+
+ = 0x00000002
+ No cipher key
+
+ = 0x00000004
+ Decryption error
+
+ = 0x00000008
+ Beacon miss
+
+ = 0x00000010
+ A non-power save disabled node has joined
+ the PS-enabled network
+
+
+=====================================================================
+
+
+Name
+ EXTENSION
+
+Synopsis
+ The WMI is used mostly for wireless control messages to a wireless module that
+ apply to wireless module management regardless of the target platform
+ implementation. However, some events peripherally related to wireless management
+ are desired during operation. These wireless extension events may be platform-
+ specific or implementation-dependent. See \93WMI Extension Commands\94
+
+
+Event ID
+ 0x1010
+
+
+=====================================================================
+
+
+Name
+ GET_PMKID_LIST_EVENT
+
+Synopsis
+ Generated by firmware in response to a \93GET_PMKID_LIST_CMD\94 command.
+
+Event Parameters
+ typedef struct {
+ A_UINT32 numPMKID;
+ Contains the number of PMKIDs in the reply
+ WMI_PMKID pmkidList[1];
+ } __ATTRIB_PACK WMI_PMKID_LIST_REPLY;
+
+Event Values
+ None
+
+
+=====================================================================
+
+
+Name
+ GET_WOW_LIST_EVENT
+
+Synopsis
+ Response to the wmiconfig \96getwowlist command to retrieve the configured Wake on
+ Wireless patterns
+
+Event ID
+ 0x10018
+
+Event Parameters
+ {
+
+ A_UINT8 num_filters
+ Total number of patterns in the list
+ A_UINT8 this_filter_num
+ The filter number
+ A_UINT8 wow_mode
+ Shows whether WoW is enabled or disabled
+ A_UINT8 host_mode
+ Shows whether the host is asleep or awake
+ WOW_FILTER wow_filters[1]
+ List of WoW filters (pattern and mask data bytes)
+ } WMI_GET_WOW_LIST_REPLY;
+
+ {
+ Each wow_filter_list element shows:
+ A_UINT8 wow_valid_filter
+ Whether the filter is valid
+ A_UINT8 wow_filter_list_id
+ Filter List ID (23 = default)
+ A_UINT8 wow_filter_size
+ Size in bytes of the filter
+ A_UINT8 wow_filter_offset
+ Offset of the pattern to search in the data packet
+ A_UINT8 wow_filter_mask[MASK_SIZE]
+ The mask to be applied to the pattern
+ A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE]
+ The pattern that to match to wake up the host
+ } WOW_FILTER
+
+Event Values
+ None
+
+=====================================================================
+
+
+
+Name
+ NEIGHBOR_REPORT
+
+Synopsis
+ Indicates the existence of neighbor APs that match the current profile. The host uses
+ this event to populate the PMKID cache on the AR6000 and/or to perform
+ preauthentication. This event is only generated in infrastructure mode.
+
+ A total of numberOfAps pairs of bssid/bssFlags exist, one pair for each AP.
+
+Event ID
+ 0x1008
+
+Event Parameters
+ UINT8 numberOfAps
+ The number of APs reported about in
+ this event
+ {
+ UINT8 bssid[6]
+ MAC address of a neighbor AP
+ UINT8 bssFlags
+ A WMI_BSS_FLAGS value
+ }[numberOfAps]
+
+
+Event Values
+ {
+ WMI_DEFAULT_BSS_FLAGS = 0
+ Logical OR of 1 or more
+ WMI_BSS_FLAGS
+ WMI_PREAUTH_CAPABLE_BSS
+ = 1
+ Indicates that this AP is capable of
+ preauthentication
+ WMI_PMKID_VALID_BSS
+ = 2
+ Indicates that the AR6000 have a
+ valid pairwise master key for this AP
+ } WMI_BSS_FLAGS
+
+
+=====================================================================
+
+
+
+Name
+ OPT_RX_FRAME_EVENT
+
+Synopsis
+ Special feature, informs host of the reception of a special frame.
+
+Event ID
+ 0x100E
+
+Event Parameters
+ {
+ A_UINT16 channel;
+ A_UINT8 frameType;
+ A_INT8 snr;
+ A_UINT8 srcAddr[ATH_MAC_LEN];
+ A_UINT8 bssid[ATH_MAC_LEN];
+ }WMI_OPT_RX_INFO_HDR
+
+Event Values
+ None
+
+=====================================================================
+
+
+
+Name
+ PSTREAM_TIMEOUT
+
+Synopsis
+ Indicates that a priority stream that got created as a result of priority-marked data
+ flow (priority marked in IP TOS) being idle for the default inactivity interval period
+ (specified in the \93CREATE_PSTREAM\94 command) used for priority streams created
+ implicitly by the driver. This event is not indicated for user-created priority streams.
+ User-created priority streams exist until the users delete them explicitly. They do not
+ timeout due to data inactivity.
+
+Event ID
+ 0x1007
+
+Event Parameters
+ A_UINT8
+ trafficClass
+ Indicated the traffic class of priority
+ stream that timed out
+
+Event Values
+ {
+ WMM_AC_BE = 0
+ Best effort
+ WMM_AC_BK = 1
+ Background
+ WMM_AC_VI = 2
+ Video
+ WMM_AC_VO = 3
+ Voice
+ } TRAFFIC CLASS
+
+
+=====================================================================
+
+Name
+ READY
+
+Synopsis
+ Indicates that the AR6000 device is prepared to accept commands. It is sent once after
+ power on or reset. It also indicates the MAC address of the device.
+
+Event ID
+ 0x1001
+
+Event Parameters
+ UINT8 macAddr[6]
+ Device MAC address
+ UINT8 phyCapability
+ A WMI_PHY_CAPABILITY value. Indicates the
+ capabilities of the device wireless module\92s radio
+
+Event Values
+ {
+ WMI_11A_CAPABILITY = 1
+ WMI_11G_CAPABILITY = 2
+ WMI_11AG_CAPABILITY = 3
+ } WMI_PHY_CAPABILITY
+
+
+=====================================================================
+
+Name
+ REGDOMAIN
+
+Synopsis
+ Indicates that the regulatory domain has changed. It initially occurs when the
+ AR6000 device reads the board data information. The regulatory domain can also
+ change when the device is a world-mode SKU. In this case, the regulatory domain is
+ based on the country advertised by APs per the IEEE 802.11d specification. A
+ potential side effect of a regulatory domain change is a change in the list of available
+ channels. Any channel restrictions that exist as a result of a previous
+ \93SET_CHANNEL_PARAMETERS\94 command are lifted.
+
+Event ID
+ 0x1006
+
+Event Parameters
+ UINT32 regDomain
+ The range of 0x0000 \96 0x00FF
+ corresponds to an ISO country code.
+
+ Other regCodes are reserved for world
+ mode settings and specific regulatory
+ domains.
+
+Event Values
+ None
+
+
+=====================================================================
+
+
+
+Name
+ REPORT_STATISTICS
+
+Synopsis
+ A reply to a \93GET_TARGET_STATS\94 command.
+
+Event ID
+ 0x100B
+
+Event Parameters
+ When the statistics are sent to the host, the AR6001 clear them so that a new set of
+ statistics are collected for the next report.
+
+ UINT32 tx_packets
+ UINT32 tx_bytes
+ UINT32 tx_unicast_pkts
+ UINT32 tx_unicast_bytes
+ UINT32 tx_multicast_pkts
+ UINT32 tx_multicast_bytes
+ UINT32 tx_broadcast_pkts
+ UINT32 tx_broadcast_bytes
+ UINT32 tx_rts_success_cnt
+ UINT32 tx_packet_per_ac[4]
+ Tx packets per AC: [0] = BE, [1] = BK,
+ [2] = VI, [3] = VO
+ UINT32 tx_errors
+ Number of packets which failed Tx, due
+ to all failures
+ ... REPORT_STATISTICS, continued
+ UINT32 tx_failed_cnt
+ Number of data packets that failed Tx
+ UINT32 tx_retry_cnt
+ Number of Tx retries for all packets
+ UINT32 tx_rts_fail_cnt
+ Number of RTS Tx failed count
+ UINT32 rx_packets
+ UINT32 rx_bytes
+ UINT32 rx_unicast_pkts
+ UINT32 rx_unicast_bytes
+ UINT32 rx_multicast_pkts
+ UINT32 rx_multicast_bytes
+ UINT32 rx_broadcast_pkts
+ UINT32 rx_broadcast_bytes
+ UINT32 rx_fragment_pkt
+ Number of fragmented packets received
+ UINT32 rx_errors
+ Number of Rx errors due to all failures
+ UINT32 rx_crcerr
+ Number of Rx errors due to CRC errors
+ UINT32 rx_key_cache_miss
+ Number of Rx errors due to a key not
+ being plumbed
+ UINT32 rx_decrypt_err
+ Number of Rx errors due to decryption
+ failure
+ UINT32 rx_duplicate_frames
+ Number of duplicate frames received
+ UINT32 tkip_local_mic_failure
+ Number of TKIP MIC errors detected
+ UINT32 tkip_counter_measures_invoked
+ Number of times TKIP countermeasures
+ were invoked
+ UINT32 tkip_replays
+ Number of frames that replayed a TKIP
+ encrypted frame received earlier
+ UINT32 tkip_format_errors
+ Number of frames that did not conform
+ to the TKIP frame format
+ UINT32 ccmp_format_errors
+ Number of frames that did not conform
+ to the CCMP frame format
+ UINT32 ccmp_replays
+ Number of frames that replayed a CCMP
+ encrypted frame received earlier
+ UINT32 power_save_failure_cnt
+ Number of failures that occurred when
+ the AR6001 could not go to sleep
+ UINT32 cs_bmiss_cnt
+ Number of BMISS interrupts since
+ connection
+ UINT32 cs_lowRssi_cnt
+ Number of the times the RSSI went below
+ the low RSSI threshold
+ UINT16 cs_connect_cnt
+ Number of connection times
+ UINT16 cs_disconnect_cnt
+ Number of disconnection times
+ UINT8 cs_aveBeacon_rssi
+ The current averaged value of the RSSI
+ from the beacons of the connected BSS
+ UINT8 cs_lastRoam_msec
+ Time that the last roaming took, in ms.
+ This time is the difference between
+ roaming start and actual connection.
+
+Event Values
+ None defined
+
+
+=====================================================================
+
+Name
+ ROAM_TBL_EVENT
+
+Synopsis
+ Reports the roam table, which contains the current roam mode and this information
+ for every BSS:
+
+Event ID
+ 0x100F
+
+Event Parameters
+ A_UINT8 bssid[ATH_MAC_LEN];
+ BSSID
+ A_UINT8 rssi
+ Averaged RSSI
+ A_UINT8 rssidt
+ Change in RSSI
+ A_UINT8 last_rssi
+ Last recorded RSSI
+ A_UINT8 roam_util
+ Utility value used in roaming decision
+ A_UINT8 util
+ Base utility with the BSS
+ A_UINT8 bias
+ Host configured for this BSS
+
+Event Values
+ roamMode
+ Current roam mode
+
+ = 1
+ RSSI based roam
+
+ = 2
+ Host bias-based roam
+
+ = 3
+ Lock to the current BSS
+
+ = 4
+ Autonomous roaming disabled
+
+
+=====================================================================
+
+Name
+ RSSI_THRESHOLD
+
+Synopsis
+ Alerts the host that the signal strength from the connected AP has crossed a
+ interesting threshold as defined in a previous \93RSSI_THRESHOLD_PARAMS\94
+ command.
+
+Event ID
+ 0x100C
+
+Event Parameters
+ UINT8 range
+ A WMI_RSSI_THRESHOLD_VAL
+ value, which indicates the range of
+ the average signal strength
+
+Event Values
+ {
+ WMI_RSSI_LOWTHRESHOLD_BELOW_LOWERVAL = 1
+ WMI_RSSI_LOWTHRESHOLD_LOWERVAL = 2
+ WMI_RSSI_LOWTHRESHOLD_UPPERVAL = 3
+ WMI_RSSI_HIGHTHRESHOLD_LOWERVAL = 4
+ WMI_RSSI_HIGHTHRESHOLD_HIGHERVAL = 5
+ } WMI_RSSI_THRESHOLD_VAL
+
+
+=====================================================================
+
+Name
+ SCAN_COMPLETE_EVENT
+
+Synopsis
+ Indicates the scan status. if the Scan was not completed, this event is generated with
+ the status A_ECANCELED.
+
+Event ID
+ 0x100A
+
+Event Parameters
+ A_UINT8 scanStatus
+
+Event Values
+ {
+ #define SCAN_ABORTED 16
+ #define SCAN_COMPLETED 0
+ A_UINT8 scanStatus
+ A_OK or A_ECANCELED
+ } WMI_SCAN_COMPLETE_EVENT;
+
+
+=====================================================================
+
+Name
+ TEST_EVENT
+
+Synopsis
+ The TCMD application uses a single WMI event (WMI_TEST_EVENTID) to
+ communicate events from target to host. The events are parsed by the TCMD
+ application and WMI layer is oblivious of it.
+
+Event ID
+ 0x1016
+
+Event Parameters
+ WMI_TEST_EVENTID
+
+
+Event Values
+ None
+
+
+=====================================================================
+
+
+
+Name
+ TKIP_MICERR
+
+Synopsis
+ Indicates that TKIP MIC errors were detected.
+
+Event ID
+ 0x1009
+
+Event Parameters
+ UINT8 keyid
+ Indicates the TKIP key ID
+
+ UINT8 ismcast
+ 0 = Unicast
+ 1 = Multicast
+
+Event Values
+ See event parameters
+
+=====================================================================
+
+WMI Extension Commands
+
+The WMI EXTENSION command is used to multiplex a collection of
+commands that:
+
+ Are not generic wireless commands
+ May be implementation-specific
+ May be target platform-specific
+ May be optional for a host implementation
+
+ An extension command is sent to the AR6000 targets like any other WMI
+command message and uses the WMI_EXTENSION. The first field of the
+payload for this EXTENSION command is another commandId, sometimes
+called the subcommandId, which indicates which extension command is
+being used. A subcommandId-specific payload follows the subcommandId.
+
+All extensions (subcommandIds) are listed in the header file include/wmix.h.
+See also \93WMI Extension Events\94 on page B-58.
+
+
+WMI Extension Commands
+
+
+GPIO_INPUT_GET
+ Read GPIO pins configured for input
+
+GPIO_INTR_ACK
+ Acknowledge and re-arm GPIO interrupts reported earlier
+
+GPIO_OUTPUT_SET
+ Manage output on GPIO pins configured for output
+
+GPIO_REGISTER_GET
+ Read an arbitrary GPIO register
+
+GPIO_REGISTER_SET
+ Dynamically change GPIO configuration
+
+SET_LQTHRESHOLD
+ Set link quality thresholds; the sampling happens at every unicast
+ data frame Tx, if certain thresholds are met, and corresponding
+ events are sent to the host
+
+
+=====================================================================
+
+Name
+ GPIO_INPUT_GET
+
+Synopsis
+ Allows the host to read GPIO pins that are configured for input. The values read are
+ returned through a \93GPIO_DATA\94 extension event.
+
+NOTE: Support for GPIO is optional.
+
+Command
+ N/A
+
+Command Parameters
+ None
+
+
+
+Reply Parameters
+ None
+
+
+Reset Value
+ None
+
+
+
+Restrictions
+ None
+
+=====================================================================
+
+
+Name
+ GPIO_INTR_ACK
+
+Synopsis
+ The host uses this command to acknowledge and to re-arm GPIO interrupts reported
+ through an earlier \93GPIO_INTR\94 extension event. A single \93GPIO_INTR_ACK\94
+ command should be used to acknowledge all GPIO interrupts that the host knows to
+ be outstanding (if pending interrupts are not acknowledged through
+ \93GPIO_INTR_ACK\94, another \93GPIO_INTR\94 extension event is raised).
+
+NOTE: Support for GPIO is optional.
+
+Command
+ N/A
+
+Command Parameters
+ UINT32 ack_mask
+ A mask of interrupting GPIO pins (e.g., ack_mask
+ bit [3] acknowledges an interrupt from the pin GPIO3).
+
+Command Values
+ None
+
+Reset Value
+ None
+
+Restrictions
+ The host should acknowledge only interrupts about which it was notified.
+
+
+=====================================================================
+
+Name
+ GPIO_OUTPUT_SET
+
+Synopsis
+ Manages output on GPIO pins configured for output.
+
+ Conflicts between set_mask and clear_mask or enable_mask and disable_mask result
+ in undefined behavior.
+
+NOTE: Support for GPIO is optional.
+
+Command
+ N/A
+
+Command Parameters
+ UINT32 set_mask
+ Specifies which pins should drive a 1 out
+ UINT32 clear_mask
+ Specifies which pins should drive a 0 out
+ UINT32 enable_mask
+ Specifies which pins should be enabled for output
+ UINT32 disable_mask
+ Specifies which pins should be disabled for output
+
+Command Values
+ None
+
+
+Reset Value
+ None
+
+
+Restrictions
+ None
+
+
+
+=====================================================================
+
+
+Name
+ GPIO_REGISTER_GET
+
+Synopsis
+ Allows the host to read an arbitrary GPIO register. It is intended for use during
+ bringup/debug. The target responds to this command with a \93GPIO_DATA\94 event.
+
+NOTE: Support for GPIO is optional.
+
+Command
+ N/A
+
+Command Parameters
+ UINT32
+ gpioreg_id
+ Specifies a GPIO register identifier, as defined
+in include/AR6000/AR6000_gpio.h
+
+Reply Parameters
+ None
+
+Reset Value
+ N/A
+
+Restrictions
+ None
+
+
+=====================================================================
+
+Name
+ GPIO_REGISTER_SET
+
+Synopsis
+ Allows the host to dynamically change GPIO configuration (usually handled
+ statically through the GPIO configuration DataSet).
+
+NOTE: Support for GPIO is optional.
+
+Command
+ N/A
+
+Command Parameters
+ UINT32 gpioreg_id
+ Specifies a GPIO register identifier, as defined in
+ include/AR6000/AR6000_gpio.h
+ UINT32 value
+ Specifies a value to write to the specified
+ GPIO register
+
+Command Values
+ None
+
+
+Reset Value
+ Initial hardware configuration is as defined in the AR6001 or AR6002 ROCmTM
+ Single-Chip MAC/BB/Radio for 2.4/5 GHz Embedded WLAN Applications data sheet. This
+ configuration is modified by the GPIO Configuration DataSet, if one exists.
+
+Restrictions
+ None
+
+
+=====================================================================
+
+
+Name
+ SET_LQTHRESHOLD
+
+Synopsis
+ Set link quality thresholds, the sampling happens at every unicast data frame Tx, if
+ certain threshold is met, corresponding event will be sent to host.
+
+Command
+ wmiconfig eth1 --lqThreshold <enable> <upper_threshold_1>...
+ <upper_threshold_4> <lower_threshold_1>... <lower_threshold_4>
+
+Command Parameters
+ A_UINT8 enable;
+ A_UINT8 thresholdAbove1_Val;
+ A_UINT8 thresholdAbove2_Val;
+ A_UINT8 thresholdAbove3_Val;
+ A_UINT8 thresholdAbove4_Val;
+ A_UINT8 thresholdBelow1_Val;
+ A_UINT8 thresholdBelow2_Val;
+ A_UINT8 thresholdBelow3_Val;
+ A_UINT8 thresholdBelow4_Val;
+
+Command Values
+ enable
+ = 0
+ Disable link quality sampling
+
+ = 1
+ Enable link quality sampling
+
+
+ thresholdAbove_Val
+ [1...4]
+ Above thresholds (value in [0,100]), in ascending
+ order threshold
+
+ Below_Val [1...4] = below thresholds (value
+ in [0,100]), in ascending order
+
+Reset Values
+ None
+
+Restrictions
+ None
+
+=====================================================================
+WMI Extension Events
+
+The WMI EXTENSION event is used for a collection of events that:
+
+ Are not generic wireless events
+ May be implementation-specific
+ May be target platform-specific
+ May be optional for a host implementation
+
+ An extension event is sent from the AR6000 device targets to the host just like
+any other WMI event message, using the WMI_EXTENSION_EVENTID. The
+first field of the payload for this \93EXTENSION\94 event is another commandId
+(sometimes called the subcommandId) that indicates which \93EXTENSION\94
+event is being used. A subcommandId-specific payload follows the
+subcommandId.
+
+All extensions (subcommandIds) are listed in the header file include/wmix.h.
+See also \93WMI Extension Commands\94 on page B-55.
+
+
+WMI Extension Events
+
+
+GPIO_ACK
+ Acknowledges a host set command has been processed by the device
+
+GPIO_DATA
+ Response to a host\92s request for data
+
+GPIO_INTR
+ Signals that GPIO interrupts are pending
+
+
+=====================================================================
+
+Name
+ GPIO_ACK
+
+Synopsis
+ Acknowledges that a host set command (either \93GPIO_OUTPUT_SET\94 or
+ \93GPIO_REGISTER_SET\94) has been processed by the AR6000 device.
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+ N/A
+
+Event Parameters
+ None
+
+
+Event Values
+ None
+
+=====================================================================
+
+
+Name
+ GPIO_DATA
+
+Synopsis
+ The AR6000 device uses this event to respond to the host\92s earlier request for data
+ (through either a \93GPIO_REGISTER_GET\94 or a \93GPIO_INPUT_GET\94 command).
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+ N/A
+
+Event Parameters
+ UINT32 value
+ Holds the data of interest, which is either a register value
+ (in the case of \93GPIO_REGISTER_GET\94) or a mask of
+ pin inputs (in the case of \93GPIO_INPUT_GET\94).
+ UINT32 reg_id
+ Indicates which register was read (in the case of
+ \93GPIO_REGISTER_GET\94) or is GPIO_ID_NONE (in the
+ case of \93GPIO_INPUT_GET\94)
+
+Event Values
+ None
+
+
+=====================================================================
+
+
+
+Name
+ GPIO_INTR
+
+Synopsis
+ The AR6000 device raises this event to signal that GPIO interrupts are pending.
+ These GPIOs may be interrupts that occurred after the last \93GPIO_INTR_ACK\94
+ command was issued, or may be GPIO interrupts that the host failed to acknowledge
+ in the last \93GPIO_INTR_ACK\94. The AR6000 will not raise another GPIO_INTR
+ event until this event is acknowledged through a \93GPIO_INTR_ACK\94 command.
+
+NOTE: Support for GPIO is optional.
+
+Event ID
+ N/A
+
+Event Parameters
+ UINT32 intr_mask
+ Indicates which GPIO interrupts are currently pending
+
+ UINT32 input_values
+ A recent copy of the GPIO input values, taken at the
+ time the most recent GPIO interrupt was processed
+
+Event Values
+ None
+
+
+
+=====================================================================
+#endif
--- /dev/null
+#ifndef _WMI_HOST_H_
+#define _WMI_HOST_H_
+/*
+ * Copyright (c) 2004-2006 Atheros Communications Inc.
+ * All rights reserved.
+ *
+ * This file contains local definitios for the wmi host module.
+ *
+ * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi_host.h#1 $
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ *
+ * Software distributed under the License is distributed on an "AS
+ * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ * implied. See the License for the specific language governing
+ * rights and limitations under the License.
+ *
+ *
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct wmi_stats {
+ A_UINT32 cmd_len_err;
+ A_UINT32 cmd_id_err;
+};
+
+struct wmi_t {
+ A_BOOL wmi_ready;
+ A_BOOL wmi_numQoSStream;
+ A_UINT8 wmi_wmiStream2AcMapping[WMI_PRI_MAX_COUNT];
+ WMI_PRI_STREAM_ID wmi_ac2WmiStreamMapping[WMM_NUM_AC];
+ A_UINT16 wmi_streamExistsForAC[WMM_NUM_AC];
+ A_UINT8 wmi_fatPipeExists;
+ void *wmi_devt;
+ struct wmi_stats wmi_stats;
+ struct ieee80211_node_table wmi_scan_table;
+ A_UINT8 wmi_bssid[ATH_MAC_LEN];
+ A_UINT8 wmi_powerMode;
+ A_UINT8 wmi_phyMode;
+ A_UINT8 wmi_keepaliveInterval;
+ A_MUTEX_T wmi_lock;
+};
+
+#define WMI_INIT_WMISTREAM_AC_MAP(w) \
+{ (w)->wmi_wmiStream2AcMapping[WMI_BEST_EFFORT_PRI] = WMM_AC_BE; \
+ (w)->wmi_wmiStream2AcMapping[WMI_LOW_PRI] = WMM_AC_BK; \
+ (w)->wmi_wmiStream2AcMapping[WMI_HIGH_PRI] = WMM_AC_VI; \
+ (w)->wmi_wmiStream2AcMapping[WMI_HIGHEST_PRI] = WMM_AC_VO; \
+ (w)->wmi_ac2WmiStreamMapping[WMM_AC_BE] = WMI_BEST_EFFORT_PRI; \
+ (w)->wmi_ac2WmiStreamMapping[WMM_AC_BK] = WMI_LOW_PRI; \
+ (w)->wmi_ac2WmiStreamMapping[WMM_AC_VI] = WMI_HIGH_PRI; \
+ (w)->wmi_ac2WmiStreamMapping[WMM_AC_VO] = WMI_HIGHEST_PRI; }
+
+#define WMI_WMISTREAM_ACCESSCATEGORY(w,s) (w)->wmi_wmiStream2AcMapping[s]
+#define WMI_ACCESSCATEGORY_WMISTREAM(w,ac) (w)->wmi_ac2WmiStreamMapping[ac]
+
+#define LOCK_WMI(w) A_MUTEX_LOCK(&(w)->wmi_lock);
+#define UNLOCK_WMI(w) A_MUTEX_UNLOCK(&(w)->wmi_lock);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WMI_HOST_H_ */
--- /dev/null
+/* Linux kernel driver for the ST LIS302D 3-axis accelerometer
+ *
+ * Copyright (C) 2007-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * converted to private bitbang by:
+ * Andy Green <andy@openmoko.com>
+ * ability to set acceleration threshold added by:
+ * Simon Kagstrom <simon.kagstrom@gmail.com>
+ * All rights reserved.
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * TODO
+ * * statistics for overflow events
+ * * configuration interface (sysfs) for
+ * * enable/disable x/y/z axis data ready
+ * * enable/disable resume from freee fall / click
+ * * free fall / click parameters
+ * * high pass filter parameters
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+
+#include <linux/lis302dl.h>
+
+static uint8_t lis_reg_read(struct lis302dl_info *lis, uint8_t reg)
+{
+ return spi_w8r8(lis->spi, 0xc0 | reg);
+}
+
+static void lis_reg_write(struct lis302dl_info *lis, uint8_t reg, uint8_t val)
+{
+ uint8_t data[2] = {reg, val};
+
+ spi_write(lis->spi, data, sizeof(data));
+}
+
+static void lis_reg_set_bit_mask(struct lis302dl_info *lis, uint8_t reg, uint8_t mask,
+ uint8_t val)
+{
+ uint8_t tmp;
+
+ val &= mask;
+
+ tmp = lis_reg_read(lis, reg);
+ tmp &= ~mask;
+ tmp |= val;
+ lis_reg_write(lis, reg, tmp);
+}
+
+static int __ms_to_duration(struct lis302dl_info *lis, int ms)
+{
+ /* If we have 400 ms sampling rate, the stepping is 2.5 ms,
+ * on 100 ms the stepping is 10ms */
+ if (lis->flags & LIS302DL_F_DR)
+ return min((ms * 10) / 25, 637);
+
+ return min(ms / 10, 2550);
+}
+
+static int __duration_to_ms(struct lis302dl_info *lis, int duration)
+{
+ if (lis->flags & LIS302DL_F_DR)
+ return (duration * 25) / 10;
+
+ return duration * 10;
+}
+
+static uint8_t __mg_to_threshold(struct lis302dl_info *lis, int mg)
+{
+ /* If FS is set each bit is 71mg, otherwise 18mg. The THS register
+ * has 7 bits for the threshold value */
+ if (lis->flags & LIS302DL_F_FS)
+ return min(mg / 71, 127);
+
+ return min(mg / 18, 127);
+}
+
+static int __threshold_to_mg(struct lis302dl_info *lis, uint8_t threshold)
+{
+ if (lis->flags & LIS302DL_F_FS)
+ return threshold * 71;
+
+ return threshold * 18;
+}
+
+/* interrupt handling related */
+
+enum lis302dl_intmode {
+ LIS302DL_INTMODE_GND = 0x00,
+ LIS302DL_INTMODE_FF_WU_1 = 0x01,
+ LIS302DL_INTMODE_FF_WU_2 = 0x02,
+ LIS302DL_INTMODE_FF_WU_12 = 0x03,
+ LIS302DL_INTMODE_DATA_READY = 0x04,
+ LIS302DL_INTMODE_CLICK = 0x07,
+};
+
+static void lis302dl_set_int_mode(struct device *dev, int int_pin,
+ enum lis302dl_intmode mode)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ switch (int_pin) {
+ case 1:
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x07, mode);
+ break;
+ case 2:
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL3, 0x38, mode << 3);
+ break;
+ default:
+ BUG();
+ }
+}
+
+static void __enable_wakeup(struct lis302dl_info *lis)
+{
+ lis_reg_write(lis, LIS302DL_REG_CTRL1, 0);
+
+ /* First zero to get to a known state */
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, LIS302DL_FFWUCFG_XHIE |
+ LIS302DL_FFWUCFG_YHIE | LIS302DL_FFWUCFG_ZHIE |
+ LIS302DL_FFWUCFG_LIR);
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
+ __mg_to_threshold(lis, lis->wakeup.threshold));
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+ __ms_to_duration(lis, lis->wakeup.duration));
+
+ /* Route the interrupt for wakeup */
+ lis302dl_set_int_mode(lis->dev, 1,
+ LIS302DL_INTMODE_FF_WU_1);
+
+ lis_reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
+ lis_reg_read(lis, LIS302DL_REG_OUT_X);
+ lis_reg_read(lis, LIS302DL_REG_OUT_Y);
+ lis_reg_read(lis, LIS302DL_REG_OUT_Z);
+ lis_reg_read(lis, LIS302DL_REG_STATUS);
+ lis_reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
+ lis_reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
+ lis_reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD | 7);
+}
+
+static void __enable_data_collection(struct lis302dl_info *lis)
+{
+ u_int8_t ctrl1 = LIS302DL_CTRL1_PD | LIS302DL_CTRL1_Xen |
+ LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen;
+
+ /* make sure we're powered up and generate data ready */
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, ctrl1);
+
+ /* If the threshold is zero, let the device generated an interrupt
+ * on each datum */
+ if (lis->threshold == 0) {
+ lis_reg_write(lis, LIS302DL_REG_CTRL2, 0);
+ lis302dl_set_int_mode(lis->dev, 1, LIS302DL_INTMODE_DATA_READY);
+ lis302dl_set_int_mode(lis->dev, 2, LIS302DL_INTMODE_DATA_READY);
+ } else {
+ lis_reg_write(lis, LIS302DL_REG_CTRL2,
+ LIS302DL_CTRL2_HPFF1);
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_THS_1,
+ __mg_to_threshold(lis, lis->threshold));
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+ __ms_to_duration(lis, lis->duration));
+
+ /* Clear the HP filter "starting point" */
+ lis_reg_read(lis, LIS302DL_REG_HP_FILTER_RESET);
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_CFG_1,
+ LIS302DL_FFWUCFG_XHIE | LIS302DL_FFWUCFG_YHIE |
+ LIS302DL_FFWUCFG_ZHIE | LIS302DL_FFWUCFG_LIR);
+ lis302dl_set_int_mode(lis->dev, 1, LIS302DL_INTMODE_FF_WU_12);
+ lis302dl_set_int_mode(lis->dev, 2, LIS302DL_INTMODE_FF_WU_12);
+ }
+}
+
+#if 0
+static void _report_btn_single(struct input_dev *inp, int btn)
+{
+ input_report_key(inp, btn, 1);
+ input_sync(inp);
+ input_report_key(inp, btn, 0);
+}
+
+static void _report_btn_double(struct input_dev *inp, int btn)
+{
+ input_report_key(inp, btn, 1);
+ input_sync(inp);
+ input_report_key(inp, btn, 0);
+ input_sync(inp);
+ input_report_key(inp, btn, 1);
+ input_sync(inp);
+ input_report_key(inp, btn, 0);
+}
+#endif
+
+
+static void lis302dl_bitbang_read_sample(struct lis302dl_info *lis)
+{
+ uint8_t data[(LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS) + 2] = {0xC0 | LIS302DL_REG_STATUS};
+ uint8_t *read = data + 1;
+ unsigned long flags;
+ int mg_per_sample = __threshold_to_mg(lis, 1);
+ struct spi_message msg;
+ struct spi_transfer t;
+
+ spi_message_init(&msg);
+ memset(&t, 0, sizeof t);
+ t.len = sizeof(data);
+ spi_message_add_tail(&t, &msg);
+ t.tx_buf = &data[0];
+ t.rx_buf = &data[0];
+
+ /* grab the set of register containing status and XYZ data */
+ local_irq_save(flags);
+ /* Should complete without blocking */
+ if (spi_sync(lis->spi, &msg) < 0)
+ dev_err(lis->dev, "Error reading registers\n");
+
+ local_irq_restore(flags);
+ /*
+ * at the minute the test below fails 50% of the time due to
+ * a problem with level interrupts causing ISRs to get called twice.
+ * This is a workaround for that, but actually this test is still
+ * valid and the information can be used for overrrun stats.
+ */
+
+ /* has any kind of overrun been observed by the lis302dl? */
+ if (read[0] & (LIS302DL_STATUS_XOR |
+ LIS302DL_STATUS_YOR |
+ LIS302DL_STATUS_ZOR))
+ lis->overruns++;
+
+ /* we have a valid sample set? */
+ if (read[0] & LIS302DL_STATUS_XYZDA) {
+ input_report_abs(lis->input_dev, ABS_X, mg_per_sample *
+ (s8)read[LIS302DL_REG_OUT_X - LIS302DL_REG_STATUS]);
+ input_report_abs(lis->input_dev, ABS_Y, mg_per_sample *
+ (s8)read[LIS302DL_REG_OUT_Y - LIS302DL_REG_STATUS]);
+ input_report_abs(lis->input_dev, ABS_Z, mg_per_sample *
+ (s8)read[LIS302DL_REG_OUT_Z - LIS302DL_REG_STATUS]);
+
+ input_sync(lis->input_dev);
+ } else {
+ printk("invalid sample\n");
+ }
+
+ if (lis->threshold)
+ /* acknowledge the wakeup source */
+ lis_reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
+ enable_irq(lis->pdata->interrupt);
+}
+
+static void lis302dl_irq_worker(struct work_struct *work) {
+ struct lis302dl_info *lis = container_of(work, struct lis302dl_info, work);
+ lis302dl_bitbang_read_sample(lis);
+}
+
+static irqreturn_t lis302dl_interrupt(int irq, void *_lis)
+{
+ struct lis302dl_info *lis = _lis;
+ disable_irq_nosync(lis->pdata->interrupt);
+ schedule_work(&lis->work);
+ return IRQ_HANDLED;
+}
+
+/* sysfs */
+
+static ssize_t show_overruns(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", lis->overruns);
+}
+
+static DEVICE_ATTR(overruns, S_IRUGO, show_overruns, NULL);
+
+static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ uint8_t ctrl1;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ ctrl1 = lis_reg_read(lis, LIS302DL_REG_CTRL1);
+ local_irq_restore(flags);
+
+ return sprintf(buf, "%d\n", ctrl1 & LIS302DL_CTRL1_DR ? 400 : 100);
+}
+
+static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (!strcmp(buf, "400\n")) {
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
+ LIS302DL_CTRL1_DR);
+ lis->flags |= LIS302DL_F_DR;
+ } else {
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_DR,
+ 0);
+ lis->flags &= ~LIS302DL_F_DR;
+ }
+ local_irq_restore(flags);
+
+ return count;
+}
+
+static DEVICE_ATTR(sample_rate, S_IRUGO | S_IWUSR, show_rate, set_rate);
+
+static ssize_t show_scale(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ u_int8_t ctrl1;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ ctrl1 = lis_reg_read(lis, LIS302DL_REG_CTRL1);
+ local_irq_restore(flags);
+
+ return sprintf(buf, "%s\n", ctrl1 & LIS302DL_CTRL1_FS ? "9.2" : "2.3");
+}
+
+static ssize_t set_scale(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (!strcmp(buf, "9.2\n")) {
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
+ LIS302DL_CTRL1_FS);
+ lis->flags |= LIS302DL_F_FS;
+ } else {
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_FS,
+ 0);
+ lis->flags &= ~LIS302DL_F_FS;
+ }
+
+ if (lis->flags & LIS302DL_F_INPUT_OPEN)
+ __enable_data_collection(lis);
+
+ local_irq_restore(flags);
+
+ return count;
+}
+
+static DEVICE_ATTR(full_scale, S_IRUGO | S_IWUSR, show_scale, set_scale);
+
+static ssize_t show_threshold(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+ /* Display the device view of the threshold setting */
+ return sprintf(buf, "%d\n", __threshold_to_mg(lis,
+ __mg_to_threshold(lis, lis->threshold)));
+}
+
+static ssize_t set_threshold(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ unsigned int val;
+
+ if (sscanf(buf, "%u\n", &val) != 1)
+ return -EINVAL;
+ /* 8g is the maximum if FS is 1 */
+ if (val > 8000)
+ return -ERANGE;
+
+ /* Set the threshold and write it out if the device is used */
+ lis->threshold = val;
+
+ if (lis->flags & LIS302DL_F_INPUT_OPEN) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __enable_data_collection(lis);
+ local_irq_restore(flags);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(threshold, S_IRUGO | S_IWUSR, show_threshold, set_threshold);
+
+static ssize_t show_duration(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", __duration_to_ms(lis,
+ __ms_to_duration(lis, lis->duration)));
+}
+
+static ssize_t set_duration(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ unsigned int val;
+
+ if (sscanf(buf, "%u\n", &val) != 1)
+ return -EINVAL;
+ if (val > 2550)
+ return -ERANGE;
+
+ lis->duration = val;
+ if (lis->flags & LIS302DL_F_INPUT_OPEN)
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1,
+ __ms_to_duration(lis, lis->duration));
+
+ return count;
+}
+
+static DEVICE_ATTR(duration, S_IRUGO | S_IWUSR, show_duration, set_duration);
+
+static ssize_t lis302dl_dump(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ int n = 0;
+ uint8_t reg[0x40];
+ char *end = buf;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ for (n = 0; n < sizeof(reg); n++)
+ reg[n] = lis_reg_read(lis, n);
+
+ local_irq_restore(flags);
+
+ for (n = 0; n < sizeof(reg); n += 16) {
+ hex_dump_to_buffer(reg + n, 16, 16, 1, end, 128, 0);
+ end += strlen(end);
+ *end++ = '\n';
+ *end++ = '\0';
+ }
+
+ return end - buf;
+}
+static DEVICE_ATTR(dump, S_IRUGO, lis302dl_dump, NULL);
+
+/* Configure freefall/wakeup interrupts */
+static ssize_t set_wakeup_threshold(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ unsigned int threshold;
+
+ if (sscanf(buf, "%u\n", &threshold) != 1)
+ return -EINVAL;
+
+ if (threshold > 8000)
+ return -ERANGE;
+
+ /* Zero turns the feature off */
+ if (threshold == 0) {
+ if (lis->flags & LIS302DL_F_IRQ_WAKE) {
+ disable_irq_wake(lis->pdata->interrupt);
+ lis->flags &= ~LIS302DL_F_IRQ_WAKE;
+ }
+
+ return count;
+ }
+
+ lis->wakeup.threshold = threshold;
+
+ if (!(lis->flags & LIS302DL_F_IRQ_WAKE)) {
+ enable_irq_wake(lis->pdata->interrupt);
+ lis->flags |= LIS302DL_F_IRQ_WAKE;
+ }
+
+ return count;
+}
+
+static ssize_t show_wakeup_threshold(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+ /* All events off? */
+ if (lis->wakeup.threshold == 0)
+ return sprintf(buf, "off\n");
+
+ return sprintf(buf, "%u\n", lis->wakeup.threshold);
+}
+
+static DEVICE_ATTR(wakeup_threshold, S_IRUGO | S_IWUSR, show_wakeup_threshold,
+ set_wakeup_threshold);
+
+static ssize_t set_wakeup_duration(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+ unsigned int duration;
+
+ if (sscanf(buf, "%u\n", &duration) != 1)
+ return -EINVAL;
+
+ if (duration > 2550)
+ return -ERANGE;
+
+ lis->wakeup.duration = duration;
+
+ return count;
+}
+
+static ssize_t show_wakeup_duration(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", lis->wakeup.duration);
+}
+
+static DEVICE_ATTR(wakeup_duration, S_IRUGO | S_IWUSR, show_wakeup_duration,
+ set_wakeup_duration);
+
+static struct attribute *lis302dl_sysfs_entries[] = {
+ &dev_attr_sample_rate.attr,
+ &dev_attr_full_scale.attr,
+ &dev_attr_threshold.attr,
+ &dev_attr_duration.attr,
+ &dev_attr_dump.attr,
+ &dev_attr_wakeup_threshold.attr,
+ &dev_attr_wakeup_duration.attr,
+ &dev_attr_overruns.attr,
+ NULL
+};
+
+static struct attribute_group lis302dl_attr_group = {
+ .name = NULL,
+ .attrs = lis302dl_sysfs_entries,
+};
+
+/* input device handling and driver core interaction */
+
+static int lis302dl_input_open(struct input_dev *inp)
+{
+ struct lis302dl_info *lis = input_get_drvdata(inp);
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ __enable_data_collection(lis);
+ lis->flags |= LIS302DL_F_INPUT_OPEN;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static void lis302dl_input_close(struct input_dev *inp)
+{
+ struct lis302dl_info *lis = input_get_drvdata(inp);
+ u_int8_t ctrl1 = LIS302DL_CTRL1_Xen | LIS302DL_CTRL1_Yen |
+ LIS302DL_CTRL1_Zen;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* since the input core already serializes access and makes sure we
+ * only see close() for the close of the last user, we can safely
+ * disable the data ready events */
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, ctrl1, 0x00);
+ lis->flags &= ~LIS302DL_F_INPUT_OPEN;
+
+ /* however, don't power down the whole device if still needed */
+ if (!(lis->flags & LIS302DL_F_WUP_FF ||
+ lis->flags & LIS302DL_F_WUP_CLICK)) {
+ lis_reg_set_bit_mask(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD,
+ 0x00);
+ }
+ local_irq_restore(flags);
+}
+
+/* get the device to reload its coefficients from EEPROM and wait for it
+ * to complete
+ */
+
+static int __lis302dl_reset_device(struct lis302dl_info *lis)
+{
+ int timeout = 10;
+
+ lis_reg_write(lis, LIS302DL_REG_CTRL2,
+ LIS302DL_CTRL2_BOOT | LIS302DL_CTRL2_FDS);
+
+ while ((lis_reg_read(lis, LIS302DL_REG_CTRL2)
+ & LIS302DL_CTRL2_BOOT) && (timeout--))
+ mdelay(1);
+
+ return !!(timeout < 0);
+}
+
+static int __devinit lis302dl_probe(struct spi_device *spi)
+{
+ int rc;
+ struct lis302dl_info *lis;
+ u_int8_t wai;
+ unsigned long flags;
+ struct lis302dl_platform_data *pdata = spi->dev.platform_data;
+
+ spi->mode = SPI_MODE_3;
+ rc = spi_setup(spi);
+ if (rc < 0) {
+ dev_err(&spi->dev, "spi_setup failed\n");
+ return rc;
+ }
+
+ lis = kzalloc(sizeof(*lis), GFP_KERNEL);
+ if (!lis)
+ return -ENOMEM;
+
+ lis->dev = &spi->dev;
+ lis->spi = spi;
+
+ dev_set_drvdata(lis->dev, lis);
+
+ lis->pdata = pdata;
+
+ rc = sysfs_create_group(&lis->dev->kobj, &lis302dl_attr_group);
+ if (rc) {
+ dev_err(lis->dev, "error creating sysfs group\n");
+ goto bail_free_lis;
+ }
+
+ /* initialize input layer details */
+ lis->input_dev = input_allocate_device();
+ if (!lis->input_dev) {
+ dev_err(lis->dev, "Unable to allocate input device\n");
+ goto bail_sysfs;
+ }
+
+ input_set_drvdata(lis->input_dev, lis);
+ lis->input_dev->name = pdata->name;
+ /* SPI Bus not defined as a valid bus for input subsystem*/
+ lis->input_dev->id.bustype = BUS_I2C; /* lie about it */
+ lis->input_dev->open = lis302dl_input_open;
+ lis->input_dev->close = lis302dl_input_close;
+
+ rc = input_register_device(lis->input_dev);
+ if (rc) {
+ dev_err(lis->dev, "error %d registering input device\n", rc);
+ goto bail_inp_dev;
+ }
+
+ local_irq_save(flags);
+ /* Configure our IO */
+ (lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+ wai = lis_reg_read(lis, LIS302DL_REG_WHO_AM_I);
+ if (wai != LIS302DL_WHO_AM_I_MAGIC) {
+ dev_err(lis->dev, "unknown who_am_i signature 0x%02x\n", wai);
+ dev_set_drvdata(lis->dev, NULL);
+ rc = -ENODEV;
+ local_irq_restore(flags);
+ goto bail_inp_reg;
+ }
+
+ set_bit(EV_ABS, lis->input_dev->evbit);
+ input_set_abs_params(lis->input_dev, ABS_X, 0, 0, 0, 0);
+ input_set_abs_params(lis->input_dev, ABS_Y, 0, 0, 0, 0);
+ input_set_abs_params(lis->input_dev, ABS_Z, 0, 0, 0, 0);
+
+ lis->threshold = 0;
+ lis->duration = 0;
+ memset(&lis->wakeup, 0, sizeof(lis->wakeup));
+
+ if (__lis302dl_reset_device(lis))
+ dev_err(lis->dev, "device BOOT reload failed\n");
+
+ /* force us powered */
+ lis_reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_PD |
+ LIS302DL_CTRL1_Xen |
+ LIS302DL_CTRL1_Yen |
+ LIS302DL_CTRL1_Zen);
+ mdelay(1);
+
+ lis_reg_write(lis, LIS302DL_REG_CTRL2, 0);
+ lis_reg_write(lis, LIS302DL_REG_CTRL3,
+ LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_THS_1, 0x0);
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_DURATION_1, 0x00);
+ lis_reg_write(lis, LIS302DL_REG_FF_WU_CFG_1, 0x0);
+
+ /* start off in powered down mode; we power up when someone opens us */
+ lis_reg_write(lis, LIS302DL_REG_CTRL1, LIS302DL_CTRL1_Xen |
+ LIS302DL_CTRL1_Yen | LIS302DL_CTRL1_Zen);
+
+ if (pdata->open_drain)
+ /* switch interrupt to open collector, active-low */
+ lis_reg_write(lis, LIS302DL_REG_CTRL3,
+ LIS302DL_CTRL3_PP_OD | LIS302DL_CTRL3_IHL);
+ else
+ /* push-pull, active-low */
+ lis_reg_write(lis, LIS302DL_REG_CTRL3, LIS302DL_CTRL3_IHL);
+
+ lis302dl_set_int_mode(lis->dev, 1, LIS302DL_INTMODE_GND);
+ lis302dl_set_int_mode(lis->dev, 2, LIS302DL_INTMODE_GND);
+
+ lis_reg_read(lis, LIS302DL_REG_STATUS);
+ lis_reg_read(lis, LIS302DL_REG_FF_WU_SRC_1);
+ lis_reg_read(lis, LIS302DL_REG_FF_WU_SRC_2);
+ lis_reg_read(lis, LIS302DL_REG_CLICK_SRC);
+ local_irq_restore(flags);
+
+ dev_info(lis->dev, "Found %s\n", pdata->name);
+
+ lis->pdata = pdata;
+
+ INIT_WORK(&lis->work, lis302dl_irq_worker);
+
+ set_irq_handler(lis->pdata->interrupt, handle_level_irq);
+ set_irq_type(lis->pdata->interrupt, IRQ_TYPE_LEVEL_LOW);
+ rc = request_irq(lis->pdata->interrupt, lis302dl_interrupt,
+ IRQF_TRIGGER_FALLING, "lis302dl", lis);
+
+ if (rc < 0) {
+ dev_err(lis->dev, "error requesting IRQ %d\n",
+ lis->pdata->interrupt);
+ goto bail_inp_reg;
+ }
+ return 0;
+
+bail_inp_reg:
+ input_unregister_device(lis->input_dev);
+bail_inp_dev:
+ input_free_device(lis->input_dev);
+bail_sysfs:
+ sysfs_remove_group(&lis->dev->kobj, &lis302dl_attr_group);
+bail_free_lis:
+ kfree(lis);
+ return rc;
+}
+
+static int __devexit lis302dl_remove(struct spi_device *spi)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+ unsigned long flags;
+
+ /* Disable interrupts */
+ if (lis->flags & LIS302DL_F_IRQ_WAKE)
+ disable_irq_wake(lis->pdata->interrupt);
+ free_irq(lis->pdata->interrupt, lis);
+
+ /* Reset and power down the device */
+ local_irq_save(flags);
+ lis_reg_write(lis, LIS302DL_REG_CTRL3, 0x00);
+ lis_reg_write(lis, LIS302DL_REG_CTRL2, 0x00);
+ lis_reg_write(lis, LIS302DL_REG_CTRL1, 0x00);
+ local_irq_restore(flags);
+
+ /* Cleanup resources */
+ sysfs_remove_group(&spi->dev.kobj, &lis302dl_attr_group);
+ input_unregister_device(lis->input_dev);
+ if (lis->input_dev)
+ input_free_device(lis->input_dev);
+ dev_set_drvdata(lis->dev, NULL);
+ kfree(lis);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static uint8_t regs_to_save[] = {
+ LIS302DL_REG_CTRL1,
+ LIS302DL_REG_CTRL2,
+ LIS302DL_REG_CTRL3,
+ LIS302DL_REG_FF_WU_CFG_1,
+ LIS302DL_REG_FF_WU_THS_1,
+ LIS302DL_REG_FF_WU_DURATION_1,
+ LIS302DL_REG_FF_WU_CFG_2,
+ LIS302DL_REG_FF_WU_THS_2,
+ LIS302DL_REG_FF_WU_DURATION_2,
+ LIS302DL_REG_CLICK_CFG,
+ LIS302DL_REG_CLICK_THSY_X,
+ LIS302DL_REG_CLICK_THSZ,
+ LIS302DL_REG_CLICK_TIME_LIMIT,
+ LIS302DL_REG_CLICK_LATENCY,
+ LIS302DL_REG_CLICK_WINDOW,
+
+};
+
+static int lis302dl_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+ unsigned long flags;
+ u_int8_t tmp;
+ int n;
+
+ /* determine if we want to wake up from the accel. */
+ if (lis->flags & LIS302DL_F_WUP_CLICK)
+ return 0;
+
+ disable_irq(lis->pdata->interrupt);
+ local_irq_save(flags);
+
+ /*
+ * When we share SPI over multiple sensors, there is a race here
+ * that one or more sensors will lose. In that case, the shared
+ * SPI bus GPIO will be in sleep mode and partially pulled down. So
+ * we explicitly put our IO into "wake" mode here before the final
+ * traffic to the sensor.
+ */
+ (lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+ /* save registers */
+ for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
+ lis->regs[regs_to_save[n]] =
+ lis_reg_read(lis, regs_to_save[n]);
+
+ /* power down or enable wakeup */
+
+ if (lis->wakeup.threshold == 0) {
+ tmp = lis_reg_read(lis, LIS302DL_REG_CTRL1);
+ tmp &= ~LIS302DL_CTRL1_PD;
+ lis_reg_write(lis, LIS302DL_REG_CTRL1, tmp);
+ } else
+ __enable_wakeup(lis);
+
+ /* place our IO to the device in sleep-compatible states */
+ (lis->pdata->lis302dl_suspend_io)(lis, 0);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int lis302dl_resume(struct spi_device *spi)
+{
+ struct lis302dl_info *lis = dev_get_drvdata(&spi->dev);
+ unsigned long flags;
+ int n;
+
+ if (lis->flags & LIS302DL_F_WUP_CLICK)
+ return 0;
+
+ local_irq_save(flags);
+
+ /* get our IO to the device back in operational states */
+ (lis->pdata->lis302dl_suspend_io)(lis, 1);
+
+ /* resume from powerdown first! */
+ lis_reg_write(lis, LIS302DL_REG_CTRL1,
+ LIS302DL_CTRL1_PD |
+ LIS302DL_CTRL1_Xen |
+ LIS302DL_CTRL1_Yen |
+ LIS302DL_CTRL1_Zen);
+ mdelay(1);
+
+ if (__lis302dl_reset_device(lis))
+ dev_err(&spi->dev, "device BOOT reload failed\n");
+
+ lis->regs[LIS302DL_REG_CTRL1] |= LIS302DL_CTRL1_PD |
+ LIS302DL_CTRL1_Xen |
+ LIS302DL_CTRL1_Yen |
+ LIS302DL_CTRL1_Zen;
+
+ /* restore registers after resume */
+ for (n = 0; n < ARRAY_SIZE(regs_to_save); n++)
+ lis_reg_write(lis, regs_to_save[n], lis->regs[regs_to_save[n]]);
+
+ /* if someone had us open, reset the non-wake threshold stuff */
+ if (lis->flags & LIS302DL_F_INPUT_OPEN)
+ __enable_data_collection(lis);
+
+ local_irq_restore(flags);
+ enable_irq(lis->pdata->interrupt);
+
+ return 0;
+}
+#else
+#define lis302dl_suspend NULL
+#define lis302dl_resume NULL
+#endif
+
+static struct spi_driver lis302dl_spi_driver = {
+ .driver = {
+ .name = "lis302dl",
+ .owner = THIS_MODULE,
+ },
+
+ .probe = lis302dl_probe,
+ .remove = __devexit_p(lis302dl_remove),
+ .suspend = lis302dl_suspend,
+ .resume = lis302dl_resume,
+};
+
+static int __devinit lis302dl_init(void)
+{
+ return spi_register_driver(&lis302dl_spi_driver);
+}
+module_init(lis302dl_init);
+
+static void __exit lis302dl_exit(void)
+{
+ spi_unregister_driver(&lis302dl_spi_driver);
+}
+module_exit(lis302dl_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * iPAQ H1940 touchscreen support
+ *
+ * ChangeLog
+ *
+ * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
+ * - added clock (de-)allocation code
+ *
+ * 2005-03-06: Arnaud Patard <arnaud.patard@rtp-net.org>
+ * - h1940_ -> s3c2410 (this driver is now also used on the n30
+ * machines :P)
+ * - Debug messages are now enabled with the config option
+ * TOUCHSCREEN_S3C2410_DEBUG
+ * - Changed the way the value are read
+ * - Input subsystem should now work
+ * - Use ioremap and readl/writel
+ *
+ * 2005-03-23: Arnaud Patard <arnaud.patard@rtp-net.org>
+ * - Make use of some undocumented features of the touchscreen
+ * controller
+ *
+ * 2007-05-23: Harald Welte <laforge@openmoko.org>
+ * - Add proper support for S32440
+ *
+ * 2008-06-23: Andy Green <andy@openmoko.com>
+ * - removed averaging system
+ * - added generic Touchscreen filter stuff
+ *
+ * 2008-11-27: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * - improve interrupt handling
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/timer.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/ts.h>
+#include <mach/gpio-fns.h>
+#include <plat/regs-adc.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+
+/* For ts.dev.id.version */
+#define S3C2410TSVERSION 0x0101
+
+#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
+
+#define WAIT4INT(x) (((x)<<8) | \
+ S3C2410_ADCTSC_YM_SEN | \
+ S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | \
+ S3C2410_ADCTSC_XY_PST(3))
+
+#define AUTOPST (S3C2410_ADCTSC_YM_SEN | \
+ S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | \
+ S3C2410_ADCTSC_AUTO_PST | \
+ S3C2410_ADCTSC_XY_PST(0))
+
+#define DEBUG_LVL KERN_DEBUG
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("s3c2410 touchscreen driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+static char *s3c2410ts_name = "s3c2410 TouchScreen";
+
+#define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */
+#define TS_EVENT_FIFO_SIZE (2 << 6) /* must be a power of 2 */
+
+#define TS_STATE_STANDBY 0 /* initial state */
+#define TS_STATE_PRESSED 1
+#define TS_STATE_RELEASE_PENDING 2
+#define TS_STATE_RELEASE 3
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct s3c2410ts {
+ struct input_dev *dev;
+ struct ts_filter_chain *chain;
+ int is_down;
+ int state;
+ struct kfifo *event_fifo;
+};
+
+static struct s3c2410ts ts;
+
+static void __iomem *base_addr;
+
+/*
+ * A few low level functions.
+ */
+
+static inline void s3c2410_ts_connect(void)
+{
+ s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+}
+
+static void s3c2410_ts_start_adc_conversion(void)
+{
+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+ base_addr + S3C2410_ADCTSC);
+ writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START,
+ base_addr + S3C2410_ADCCON);
+}
+
+/*
+ * Just send the input events.
+ */
+
+enum ts_input_event {IE_DOWN = 0, IE_UP};
+
+static void ts_input_report(int event, int coords[])
+{
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+ static char *s[] = {"down", "up"};
+ struct timeval tv;
+
+ do_gettimeofday(&tv);
+#endif
+
+ if (event == IE_DOWN) {
+ input_report_abs(ts.dev, ABS_X, coords[0]);
+ input_report_abs(ts.dev, ABS_Y, coords[1]);
+ input_report_key(ts.dev, BTN_TOUCH, 1);
+ input_report_abs(ts.dev, ABS_PRESSURE, 1);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+ printk(DEBUG_LVL "T:%06d %6s (X:%03d, Y:%03d)\n",
+ (int)tv.tv_usec, s[event], coords[0], coords[1]);
+#endif
+ } else {
+ input_report_key(ts.dev, BTN_TOUCH, 0);
+ input_report_abs(ts.dev, ABS_PRESSURE, 0);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+ printk(DEBUG_LVL "T:%06d %6s\n",
+ (int)tv.tv_usec, s[event]);
+#endif
+ }
+
+ input_sync(ts.dev);
+}
+
+/*
+ * Manage the state of the touchscreen.
+ */
+
+static void event_send_timer_f(unsigned long data);
+
+static struct timer_list event_send_timer =
+ TIMER_INITIALIZER(event_send_timer_f, 0, 0);
+
+static void event_send_timer_f(unsigned long data)
+{
+ static int noop_counter;
+ int event_type;
+
+ while (__kfifo_get(ts.event_fifo, (unsigned char *)&event_type,
+ sizeof(int))) {
+ int buf[2];
+
+ switch (event_type) {
+ case 'D':
+ if (ts.state == TS_STATE_RELEASE_PENDING)
+ /* Ignore short UP event */
+ ts.state = TS_STATE_PRESSED;
+ break;
+
+ case 'U':
+ ts.state = TS_STATE_RELEASE_PENDING;
+ break;
+
+ case 'P':
+ if (ts.is_down) /* stylus_action needs a conversion */
+ s3c2410_ts_start_adc_conversion();
+
+ if (unlikely(__kfifo_get(ts.event_fifo,
+ (unsigned char *)buf,
+ sizeof(int) * 2)
+ != sizeof(int) * 2))
+ goto ts_exit_error;
+
+ ts_input_report(IE_DOWN, buf);
+ ts.state = TS_STATE_PRESSED;
+ break;
+
+ default:
+ goto ts_exit_error;
+ }
+
+ noop_counter = 0;
+ }
+
+ if (noop_counter++ >= 1) {
+ noop_counter = 0;
+ if (ts.state == TS_STATE_RELEASE_PENDING) {
+ /*
+ * We delay the UP event for a while to avoid jitter.
+ * If we get a DOWN event we do not send it.
+ */
+ ts_input_report(IE_UP, NULL);
+ ts.state = TS_STATE_STANDBY;
+
+ ts_filter_chain_clear(ts.chain);
+ }
+ } else {
+ mod_timer(&event_send_timer, jiffies + TS_RELEASE_TIMEOUT);
+ }
+
+ return;
+
+ts_exit_error: /* should not happen unless we have a bug */
+ printk(KERN_ERR __FILE__ ": event_send_timer_f failed\n");
+}
+
+/*
+ * Manage interrupts.
+ */
+
+static irqreturn_t stylus_updown(int irq, void *dev_id)
+{
+ unsigned long data0;
+ unsigned long data1;
+ int event_type;
+
+ data0 = readl(base_addr+S3C2410_ADCDAT0);
+ data1 = readl(base_addr+S3C2410_ADCDAT1);
+
+ ts.is_down = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) &&
+ (!(data1 & S3C2410_ADCDAT0_UPDOWN));
+
+ event_type = ts.is_down ? 'D' : 'U';
+
+ if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)&event_type,
+ sizeof(int)) != sizeof(int))) /* should not happen */
+ printk(KERN_ERR __FILE__": stylus_updown lost event!\n");
+
+ if (ts.is_down)
+ s3c2410_ts_start_adc_conversion();
+ else
+ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
+
+ mod_timer(&event_send_timer, jiffies + 1);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t stylus_action(int irq, void *dev_id)
+{
+ int buf[3];
+
+ /* Grab the ADC results. */
+ buf[1] = readl(base_addr + S3C2410_ADCDAT0) &
+ S3C2410_ADCDAT0_XPDATA_MASK;
+ buf[2] = readl(base_addr + S3C2410_ADCDAT1) &
+ S3C2410_ADCDAT1_YPDATA_MASK;
+
+ switch (ts_filter_chain_feed(ts.chain, &buf[1])) {
+ case 0:
+ /* The filter wants more points. */
+ s3c2410_ts_start_adc_conversion();
+ return IRQ_HANDLED;
+ case 1:
+ /* We have a point from the filters or no filtering enabled. */
+ buf[0] = 'P';
+ break;
+ default:
+ printk(KERN_ERR __FILE__
+ ":%d Invalid ts_filter_chain_feed return value.\n",
+ __LINE__);
+ case -1:
+ /* Error. Ignore the event. */
+ ts_filter_chain_clear(ts.chain);
+ writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+ return IRQ_HANDLED;
+ };
+
+ if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)buf,
+ sizeof(int) * 3) != sizeof(int) * 3))
+ printk(KERN_ERR __FILE__":stylus_action bug.\n");
+
+ writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+ mod_timer(&event_send_timer, jiffies + 1);
+
+ return IRQ_HANDLED;
+}
+
+static struct clk *adc_clock;
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init s3c2410ts_probe(struct platform_device *pdev)
+{
+ int rc;
+ struct s3c2410_ts_mach_info *info;
+ struct input_dev *input_dev;
+ int ret = 0;
+
+ dev_info(&pdev->dev, "Starting\n");
+
+ info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
+
+ if (!info)
+ {
+ dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n");
+ return -EINVAL;
+ }
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+ printk(DEBUG_LVL "Entering s3c2410ts_init\n");
+#endif
+
+ adc_clock = clk_get(NULL, "adc");
+ if (!adc_clock) {
+ dev_err(&pdev->dev, "failed to get adc clock source\n");
+ return -ENOENT;
+ }
+ clk_enable(adc_clock);
+
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+ printk(DEBUG_LVL "got and enabled clock\n");
+#endif
+
+ base_addr = ioremap(S3C2410_PA_ADC,0x20);
+ if (base_addr == NULL) {
+ dev_err(&pdev->dev, "Failed to remap register block\n");
+ ret = -ENOMEM;
+ goto bail0;
+ }
+
+
+ /* If we acutally are a S3C2410: Configure GPIOs */
+ if (!strcmp(pdev->name, "s3c2410-ts"))
+ s3c2410_ts_connect();
+
+ if ((info->presc & 0xff) > 0)
+ writel(S3C2410_ADCCON_PRSCEN |
+ S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
+ base_addr + S3C2410_ADCCON);
+ else
+ writel(0, base_addr+S3C2410_ADCCON);
+
+ /* Initialise registers */
+ if ((info->delay & 0xffff) > 0)
+ writel(info->delay & 0xffff, base_addr + S3C2410_ADCDLY);
+
+ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+ /* Initialise input stuff */
+ memset(&ts, 0, sizeof(struct s3c2410ts));
+ input_dev = input_allocate_device();
+
+ if (!input_dev) {
+ dev_err(&pdev->dev, "Unable to allocate the input device\n");
+ ret = -ENOMEM;
+ goto bail1;
+ }
+
+ ts.dev = input_dev;
+ ts.dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) |
+ BIT_MASK(EV_ABS);
+ ts.dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0);
+ input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0);
+ input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0);
+
+ ts.dev->name = s3c2410ts_name;
+ ts.dev->id.bustype = BUS_RS232;
+ ts.dev->id.vendor = 0xDEAD;
+ ts.dev->id.product = 0xBEEF;
+ ts.dev->id.version = S3C2410TSVERSION;
+ ts.state = TS_STATE_STANDBY;
+ ts.event_fifo = kfifo_alloc(TS_EVENT_FIFO_SIZE, GFP_KERNEL, NULL);
+ if (IS_ERR(ts.event_fifo)) {
+ ret = -EIO;
+ goto bail2;
+ }
+
+ /* create the filter chain set up for the 2 coordinates we produce */
+ ts.chain = ts_filter_chain_create(pdev, info->filter_config, 2);
+
+ if (IS_ERR(ts.chain))
+ goto bail2;
+
+ ts_filter_chain_clear(ts.chain);
+
+ /* Get irqs */
+ if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM,
+ "s3c2410_action", ts.dev)) {
+ dev_err(&pdev->dev, "Could not allocate ts IRQ_ADC !\n");
+ iounmap(base_addr);
+ ret = -EIO;
+ goto bail3;
+ }
+ if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM,
+ "s3c2410_action", ts.dev)) {
+ dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n");
+ free_irq(IRQ_ADC, ts.dev);
+ iounmap(base_addr);
+ ret = -EIO;
+ goto bail4;
+ }
+
+ dev_info(&pdev->dev, "Successfully loaded\n");
+
+ /* All went ok, so register to the input system */
+ rc = input_register_device(ts.dev);
+ if (rc) {
+ ret = -EIO;
+ goto bail5;
+ }
+
+ return 0;
+
+bail5:
+ free_irq(IRQ_TC, ts.dev);
+ free_irq(IRQ_ADC, ts.dev);
+ clk_disable(adc_clock);
+ iounmap(base_addr);
+ disable_irq(IRQ_TC);
+bail4:
+ disable_irq(IRQ_ADC);
+bail3:
+ ts_filter_chain_destroy(ts.chain);
+ kfifo_free(ts.event_fifo);
+bail2:
+ input_unregister_device(ts.dev);
+bail1:
+ iounmap(base_addr);
+bail0:
+
+ return ret;
+}
+
+static int s3c2410ts_remove(struct platform_device *pdev)
+{
+ disable_irq(IRQ_ADC);
+ disable_irq(IRQ_TC);
+ free_irq(IRQ_TC,ts.dev);
+ free_irq(IRQ_ADC,ts.dev);
+
+ if (adc_clock) {
+ clk_disable(adc_clock);
+ clk_put(adc_clock);
+ adc_clock = NULL;
+ }
+
+ input_unregister_device(ts.dev);
+ iounmap(base_addr);
+
+ ts_filter_chain_destroy(ts.chain);
+
+ kfifo_free(ts.event_fifo);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC);
+ writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM,
+ base_addr+S3C2410_ADCCON);
+
+ disable_irq(IRQ_ADC);
+ disable_irq(IRQ_TC);
+
+ clk_disable(adc_clock);
+
+ return 0;
+}
+
+static int s3c2410ts_resume(struct platform_device *pdev)
+{
+ struct s3c2410_ts_mach_info *info =
+ ( struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
+
+ clk_enable(adc_clock);
+ mdelay(1);
+
+ ts_filter_chain_clear(ts.chain);
+
+ enable_irq(IRQ_ADC);
+ enable_irq(IRQ_TC);
+
+ if ((info->presc&0xff) > 0)
+ writel(S3C2410_ADCCON_PRSCEN |
+ S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
+ base_addr+S3C2410_ADCCON);
+ else
+ writel(0,base_addr+S3C2410_ADCCON);
+
+ /* Initialise registers */
+ if ((info->delay & 0xffff) > 0)
+ writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY);
+
+ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
+
+ return 0;
+}
+
+#else
+#define s3c2410ts_suspend NULL
+#define s3c2410ts_resume NULL
+#endif
+
+static struct platform_driver s3c2410ts_driver = {
+ .driver = {
+ .name = "s3c2410-ts",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c2410ts_probe,
+ .remove = s3c2410ts_remove,
+ .suspend = s3c2410ts_suspend,
+ .resume = s3c2410ts_resume,
+
+};
+
+static struct platform_driver s3c2440ts_driver = {
+ .driver = {
+ .name = "s3c2440-ts",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c2410ts_probe,
+ .remove = s3c2410ts_remove,
+ .suspend = s3c2410ts_suspend,
+ .resume = s3c2410ts_resume,
+
+};
+
+static int __init s3c2410ts_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&s3c2410ts_driver);
+ if (rc < 0)
+ return rc;
+
+ rc = platform_driver_register(&s3c2440ts_driver);
+ if (rc < 0)
+ platform_driver_unregister(&s3c2410ts_driver);
+
+ return rc;
+}
+
+static void __exit s3c2410ts_exit(void)
+{
+ platform_driver_unregister(&s3c2440ts_driver);
+ platform_driver_unregister(&s3c2410ts_driver);
+}
+
+module_init(s3c2410ts_init);
+module_exit(s3c2410ts_exit);
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009 Andy Green <andy@openmoko.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <linux/touchscreen/ts_filter_chain.h>
+#include <linux/touchscreen/ts_filter.h>
+
+/*
+ * Tux, would you like the following function in /lib?
+ * It helps us avoid silly code.
+ */
+
+/**
+ * sptrlen - Count how many non-null pointers are in a pointer array
+ * @arr: The array of pointers
+ */
+static int sptrlen(const void *arr)
+{
+ /* All pointers have the same size. */
+ const int **p = (const int **)arr;
+ int len = 0;
+
+ while (*(p++))
+ len++;
+
+ return len;
+}
+
+
+struct ts_filter_chain {
+ /* All of the filters. */
+ struct ts_filter **arr;
+ /* Filters that can propagate values in the chain. */
+ struct ts_filter **pchain;
+ /* Length of the pchain array. */
+ int pchain_len;
+ /* FIXME: Add a spinlock and use it. */
+};
+
+struct ts_filter_chain *ts_filter_chain_create(
+ struct platform_device *pdev,
+ const struct ts_filter_chain_configuration conf[],
+ int count_coords)
+{
+ struct ts_filter_chain *c;
+ int count = 0;
+ int len;
+
+ BUG_ON((count_coords < 1));
+ BUG_ON(count_coords > MAX_TS_FILTER_COORDS);
+
+ c = kzalloc(sizeof(struct ts_filter_chain), GFP_KERNEL);
+ if (!c)
+ goto create_err_1;
+
+ len = (sptrlen(conf) + 1);
+ /* Memory for two null-terminated arrays of filters. */
+ c->arr = kzalloc(2 * sizeof(struct ts_filter *) * len, GFP_KERNEL);
+ if (!c->arr)
+ goto create_err_1;
+ c->pchain = c->arr + len;
+
+ while (conf->api) {
+ /* TODO: Can we get away with only sending pdev->dev? */
+ struct ts_filter *f =
+ (conf->api->create)(pdev, conf->config, count_coords);
+ if (!f) {
+ dev_info(&pdev->dev, "Filter %d creation failed\n",
+ count);
+ goto create_err_2;
+ }
+
+ f->api = conf->api;
+ c->arr[count++] = f;
+
+ if (f->api->haspoint && f->api->getpoint && f->api->process)
+ c->pchain[c->pchain_len++] = f;
+
+ conf++;
+ }
+
+ dev_info(&pdev->dev, "%d filter(s) initialized\n", count);
+
+ return c;
+
+create_err_2:
+ ts_filter_chain_destroy(c); /* Also frees c. */
+create_err_1:
+ dev_info(&pdev->dev, "Error in filter chain initialization\n");
+ /*
+ * FIXME: Individual filters have to return errors this way.
+ * We only have to forward the errors we find.
+ */
+ return ERR_PTR(-ENOMEM);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_create);
+
+void ts_filter_chain_destroy(struct ts_filter_chain *c)
+{
+ if (c->arr) {
+ struct ts_filter **a = c->arr;
+ while (*a) {
+ ((*a)->api->destroy)(*a);
+ a++;
+ }
+ kfree(c->arr);
+ }
+ kfree(c);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_destroy);
+
+void ts_filter_chain_clear(struct ts_filter_chain *c)
+{
+ struct ts_filter **a = c->arr;
+
+ while (*a) {
+ if ((*a)->api->clear)
+ ((*a)->api->clear)(*a);
+ a++;
+ }
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_clear);
+
+static void ts_filter_chain_scale(struct ts_filter_chain *c, int *coords)
+{
+ struct ts_filter **a = c->arr;
+ while (*a) {
+ if ((*a)->api->scale)
+ ((*a)->api->scale)(*a, coords);
+ a++;
+ }
+}
+
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords)
+{
+ int len = c->pchain_len;
+ int i = len - 1;
+
+ if (!c->pchain[0])
+ return 1; /* Nothing to do. */
+
+ BUG_ON(c->pchain[0]->api->haspoint(c->pchain[0]));
+
+ if (c->pchain[0]->api->process(c->pchain[0], coords))
+ return -1;
+
+ while (i >= 0 && i < len) {
+ if (c->pchain[i]->api->haspoint(c->pchain[i])) {
+ c->pchain[i]->api->getpoint(c->pchain[i], coords);
+ if (++i < len &&
+ c->pchain[i]->api->process(c->pchain[i], coords))
+ return -1; /* Error. */
+ } else {
+ i--;
+ }
+ }
+
+ if (i >= 0) { /* Same as i == len. */
+ ts_filter_chain_scale(c, coords);
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_feed);
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ *
+ * This filter is useful to reject samples that are not reliable. We consider
+ * that a sample is not reliable if it deviates form the Majority.
+ *
+ * 1) We collect S samples.
+ *
+ * 2) For each dimension:
+ *
+ * - We sort the points.
+ * - Points that are "close enough" are considered to be in the same set.
+ * - We choose the set with more elements. If more than "threshold"
+ * points are in this set we use the first and the last point of the set
+ * to define the valid range for this dimension [min, max], otherwise we
+ * discard all the points and go to step 1.
+ *
+ * 3) We consider the unsorted S samples and try to feed them to the next
+ * filter in the chain. If one of the points of each sample
+ * is not in the allowed range for its dimension, we discard the sample.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/touchscreen/ts_filter_group.h>
+
+struct ts_filter_group {
+ /* Private filter configuration. */
+ struct ts_filter_group_configuration *config;
+ /* Filter API. */
+ struct ts_filter tsf;
+
+ int N; /* How many samples we have. */
+ int *samples[MAX_TS_FILTER_COORDS]; /* The samples: our input. */
+
+ int *group_size; /* Used for temporal computations. */
+ int *sorted_samples; /* Used for temporal computations. */
+
+ int range_max[MAX_TS_FILTER_COORDS]; /* Max. computed ranges. */
+ int range_min[MAX_TS_FILTER_COORDS]; /* Min. computed ranges. */
+
+ int tries_left; /* We finish if we don't get enough samples. */
+ int ready; /* If we are ready to deliver samples. */
+ int result; /* Index of the point being returned. */
+};
+
+#define ts_filter_to_filter_group(f) \
+ container_of(f, struct ts_filter_group, tsf)
+
+
+static void ts_filter_group_clear_internal(struct ts_filter_group *tsfg,
+ int attempts)
+{
+ tsfg->N = 0;
+ tsfg->tries_left = attempts;
+ tsfg->ready = 0;
+ tsfg->result = 0;
+}
+
+static void ts_filter_group_clear(struct ts_filter *tsf)
+{
+ struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+ ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+}
+
+static struct ts_filter *ts_filter_group_create(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *conf,
+ int count_coords)
+{
+ struct ts_filter_group *tsfg;
+ int i;
+
+ tsfg = kzalloc(sizeof(struct ts_filter_group), GFP_KERNEL);
+ if (!tsfg)
+ return NULL;
+
+ tsfg->config = container_of(conf,
+ struct ts_filter_group_configuration,
+ config);
+ tsfg->tsf.count_coords = count_coords;
+
+ BUG_ON(tsfg->config->attempts <= 0);
+
+ tsfg->samples[0] = kmalloc((2 + count_coords) * sizeof(int) *
+ tsfg->config->length, GFP_KERNEL);
+ if (!tsfg->samples[0]) {
+ kfree(tsfg);
+ return NULL;
+ }
+ for (i = 1; i < count_coords; ++i)
+ tsfg->samples[i] = tsfg->samples[0] + i * tsfg->config->length;
+ tsfg->sorted_samples = tsfg->samples[0] + count_coords *
+ tsfg->config->length;
+ tsfg->group_size = tsfg->samples[0] + (1 + count_coords) *
+ tsfg->config->length;
+
+ ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+
+ dev_info(&pdev->dev, "Created Group filter len:%d coords:%d close:%d "
+ "thresh:%d\n", tsfg->config->length, count_coords,
+ tsfg->config->close_enough, tsfg->config->threshold);
+
+ return &tsfg->tsf;
+}
+
+static void ts_filter_group_destroy(struct ts_filter *tsf)
+{
+ struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+ kfree(tsfg->samples[0]); /* first guy has pointer from kmalloc */
+ kfree(tsf);
+}
+
+static int int_cmp(const void *_a, const void *_b)
+{
+ const int *a = _a;
+ const int *b = _b;
+
+ if (*a > *b)
+ return 1;
+ if (*a < *b)
+ return -1;
+ return 0;
+}
+
+static void ts_filter_group_prepare_next(struct ts_filter *tsf);
+
+static int ts_filter_group_process(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+ int n;
+ int i;
+
+ BUG_ON(tsfg->N >= tsfg->config->length);
+ BUG_ON(tsfg->ready);
+
+ for (n = 0; n < tsf->count_coords; n++)
+ tsfg->samples[n][tsfg->N] = coords[n];
+
+ if (++tsfg->N < tsfg->config->length)
+ return 0; /* We need more samples. */
+
+ for (n = 0; n < tsfg->tsf.count_coords; n++) {
+ int *v = tsfg->sorted_samples;
+ int ngroups = 0;
+ int best_size;
+ int best_idx = 0;
+ int idx = 0;
+
+ memcpy(v, tsfg->samples[n], tsfg->N * sizeof(int));
+ /*
+ * FIXME: Remove this sort call. We already have the
+ * algorithm for this modification. The filter will
+ * need less points (about half) if there is not a
+ * lot of noise. Right now we are doing a constant
+ * amount of work no matter how much noise we are
+ * dealing with.
+ */
+ sort(v, tsfg->N, sizeof(int), int_cmp, NULL);
+
+ tsfg->group_size[0] = 1;
+ for (i = 1; i < tsfg->N; ++i) {
+ if (v[i] - v[i - 1] <= tsfg->config->close_enough)
+ tsfg->group_size[ngroups]++;
+ else
+ tsfg->group_size[++ngroups] = 1;
+ }
+ ngroups++;
+
+ best_size = tsfg->group_size[0];
+ for (i = 1; i < ngroups; i++) {
+ idx += tsfg->group_size[i - 1];
+ if (best_size < tsfg->group_size[i]) {
+ best_size = tsfg->group_size[i];
+ best_idx = idx;
+ }
+ }
+
+ if (best_size < tsfg->config->threshold) {
+ /* This set is not good enough for us. */
+ if (--tsfg->tries_left) {
+ ts_filter_group_clear_internal
+ (tsfg, tsfg->tries_left);
+ /* No errors but we need more samples. */
+ return 0;
+ }
+ return 1; /* We give up: error. */
+ }
+
+ tsfg->range_min[n] = v[best_idx];
+ tsfg->range_max[n] = v[best_idx + best_size - 1];
+ }
+
+ ts_filter_group_prepare_next(tsf);
+
+ return 0;
+}
+
+/*
+ * This private function prepares a point that will be returned
+ * in ts_filter_group_getpoint if it is available. It updates
+ * the priv->ready state also.
+ */
+static void ts_filter_group_prepare_next(struct ts_filter *tsf)
+{
+ struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+ int n;
+
+ while (priv->result < priv->N) {
+ for (n = 0; n < priv->tsf.count_coords; ++n) {
+ if (priv->samples[n][priv->result] <
+ priv->range_min[n] ||
+ priv->samples[n][priv->result] > priv->range_max[n])
+ break;
+ }
+
+ if (n == priv->tsf.count_coords) /* Sample is OK. */
+ break;
+
+ priv->result++;
+ }
+
+ if (unlikely(priv->result >= priv->N)) { /* No sample to deliver. */
+ ts_filter_group_clear_internal(priv, priv->config->attempts);
+ priv->ready = 0;
+ } else {
+ priv->ready = 1;
+ }
+}
+
+static int ts_filter_group_haspoint(struct ts_filter *tsf)
+{
+ struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+ return priv->ready;
+}
+
+static void ts_filter_group_getpoint(struct ts_filter *tsf, int *point)
+{
+ struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+ int n;
+
+ BUG_ON(!priv->ready);
+
+ for (n = 0; n < priv->tsf.count_coords; n++)
+ point[n] = priv->samples[n][priv->result];
+
+ priv->result++;
+
+ /* This call will update priv->ready. */
+ ts_filter_group_prepare_next(tsf);
+}
+
+/*
+ * Get ready to process the next batch of points, forget
+ * points we could have delivered.
+ */
+static void ts_filter_group_scale(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+ ts_filter_group_clear_internal(priv, priv->config->attempts);
+}
+
+const struct ts_filter_api ts_filter_group_api = {
+ .create = ts_filter_group_create,
+ .destroy = ts_filter_group_destroy,
+ .clear = ts_filter_group_clear,
+ .process = ts_filter_group_process,
+ .haspoint = ts_filter_group_haspoint,
+ .getpoint = ts_filter_group_getpoint,
+ .scale = ts_filter_group_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_group_api);
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ * Linearly scale touchscreen values.
+ *
+ * Expose the TS_FILTER_LINEAR_NCONSTANTS for the linear transformation
+ * using sysfs.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <linux/touchscreen/ts_filter_linear.h>
+
+struct ts_filter_linear;
+
+/* Sysfs code. */
+
+struct const_obj {
+ /* The actual private object. */
+ struct ts_filter_linear *tsfl;
+ /* Our kobject. */
+ struct kobject kobj;
+};
+
+#define to_const_obj(x) container_of(x, struct const_obj, kobj)
+
+struct const_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct const_obj *const, struct const_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct const_obj *const, struct const_attribute *attr,
+ const char *buf, size_t count);
+};
+
+#define to_const_attr(x) container_of(x, struct const_attribute, attr)
+
+
+/* Private linear filter structure. */
+
+struct ts_filter_linear {
+ /* Private configuration for this filter. */
+ struct ts_filter_linear_configuration *config;
+
+ /* Generic filter API. */
+ struct ts_filter tsf;
+
+ /* Linear constants for the transformation. */
+ int constants[TS_FILTER_LINEAR_NCONSTANTS];
+
+ /* Sysfs. */
+
+ /* Our const_object. */
+ struct const_obj c_obj;
+ /* Our type. We will stick operations to it. */
+ struct kobj_type const_ktype;
+ /* Attrs. of the virtual files. */
+ struct const_attribute kattrs[TS_FILTER_LINEAR_NCONSTANTS];
+ /* Default Attrs. Always NULL for us. */
+ struct attribute *attrs[TS_FILTER_LINEAR_NCONSTANTS + 1];
+ /* Storage for the name of the virtual files. */
+ char attr_names[TS_FILTER_LINEAR_NCONSTANTS][2];
+};
+
+#define ts_filter_to_filter_linear(f) \
+ container_of(f, struct ts_filter_linear, tsf)
+
+/* Sysfs functions. */
+
+static ssize_t const_attr_show(struct kobject *kobj,
+ struct attribute *attr,
+ char *buf)
+{
+ struct const_attribute *a = to_const_attr(attr);
+
+ return a->show(to_const_obj(kobj), a, buf);
+}
+
+static ssize_t const_attr_store(struct kobject *kobj,
+ struct attribute *attr,
+ const char *buf, size_t len)
+{
+ struct const_attribute *a = to_const_attr(attr);
+
+ return a->store(to_const_obj(kobj), a, buf, len);
+}
+
+static struct sysfs_ops const_sysfs_ops = {
+ .show = const_attr_show,
+ .store = const_attr_store,
+};
+
+static void const_release(struct kobject *kobj)
+{
+ kfree(to_const_obj(kobj)->tsfl);
+}
+
+static ssize_t const_show(struct const_obj *obj, struct const_attribute *attr,
+ char *buf)
+{
+ int who;
+
+ sscanf(attr->attr.name, "%d", &who);
+ return sprintf(buf, "%d\n", obj->tsfl->constants[who]);
+}
+
+static ssize_t const_store(struct const_obj *obj, struct const_attribute *attr,
+ const char *buf, size_t count)
+{
+ int who;
+
+ sscanf(attr->attr.name, "%d", &who);
+ sscanf(buf, "%d", &obj->tsfl->constants[who]);
+ return count;
+}
+
+/* Filter functions. */
+
+static struct ts_filter *ts_filter_linear_create(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *conf,
+ int count_coords)
+{
+ struct ts_filter_linear *tsfl;
+ int i;
+ int ret;
+
+ tsfl = kzalloc(sizeof(struct ts_filter_linear), GFP_KERNEL);
+ if (!tsfl)
+ return NULL;
+
+ tsfl->config = container_of(conf,
+ struct ts_filter_linear_configuration,
+ config);
+
+ tsfl->tsf.count_coords = count_coords;
+
+ for (i = 0; i < TS_FILTER_LINEAR_NCONSTANTS; ++i) {
+ tsfl->constants[i] = tsfl->config->constants[i];
+
+ /* sysfs */
+ sprintf(tsfl->attr_names[i], "%d", i);
+ tsfl->kattrs[i].attr.name = tsfl->attr_names[i];
+ tsfl->kattrs[i].attr.mode = 0666;
+ tsfl->kattrs[i].show = const_show;
+ tsfl->kattrs[i].store = const_store;
+ tsfl->attrs[i] = &tsfl->kattrs[i].attr;
+ }
+ tsfl->attrs[i] = NULL;
+
+ tsfl->const_ktype.sysfs_ops = &const_sysfs_ops;
+ tsfl->const_ktype.release = const_release;
+ tsfl->const_ktype.default_attrs = tsfl->attrs;
+ tsfl->c_obj.tsfl = tsfl; /* kernel frees tsfl in const_release */
+
+ ret = kobject_init_and_add(&tsfl->c_obj.kobj, &tsfl->const_ktype,
+ &pdev->dev.kobj, "calibration");
+ if (ret) {
+ kobject_put(&tsfl->c_obj.kobj);
+ return NULL;
+ }
+
+ dev_info(&pdev->dev, "Created Linear filter coords:%d\n", count_coords);
+
+ return &tsfl->tsf;
+}
+
+static void ts_filter_linear_destroy(struct ts_filter *tsf)
+{
+ struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+ /* Kernel frees tsfl in const_release. */
+ kobject_put(&tsfl->c_obj.kobj);
+}
+
+static void ts_filter_linear_scale(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+ int *k = tsfl->constants;
+ int c0 = coords[tsfl->config->coord0];
+ int c1 = coords[tsfl->config->coord1];
+
+ coords[tsfl->config->coord0] = (k[2] + k[0] * c0 + k[1] * c1) / k[6];
+ coords[tsfl->config->coord1] = (k[5] + k[3] * c0 + k[4] * c1) / k[6];
+}
+
+const struct ts_filter_api ts_filter_linear_api = {
+ .create = ts_filter_linear_create,
+ .destroy = ts_filter_linear_destroy,
+ .scale = ts_filter_linear_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_linear_api);
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009
+ * Andy Green <andy@openmoko.com>
+ * Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ * Simple mean filter.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/touchscreen/ts_filter_mean.h>
+
+struct ts_filter_mean {
+ /* Copy of the private filter configuration. */
+ struct ts_filter_mean_configuration *config;
+ /* Filter API. */
+ struct ts_filter tsf;
+
+ /* Index on a circular buffer. */
+ int curr;
+ /* Useful to tell if the circular buffer is full(read:ready). */
+ int count;
+ /* Sumation used to compute the mean. */
+ int sum[MAX_TS_FILTER_COORDS];
+ /* Keep point values and decrement them from the sum on time. */
+ int *fifo[MAX_TS_FILTER_COORDS];
+ /* Store the output of this filter. */
+ int ready;
+};
+
+#define ts_filter_to_filter_mean(f) container_of(f, struct ts_filter_mean, tsf)
+
+
+static void ts_filter_mean_clear(struct ts_filter *tsf);
+
+static struct ts_filter *ts_filter_mean_create(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *conf,
+ int count_coords)
+{
+ struct ts_filter_mean *priv;
+ int *v;
+ int n;
+
+ priv = kzalloc(sizeof(struct ts_filter_mean), GFP_KERNEL);
+ if (!priv)
+ return NULL;
+
+ priv->tsf.count_coords = count_coords;
+ priv->config = container_of(conf,
+ struct ts_filter_mean_configuration,
+ config);
+
+ BUG_ON(priv->config->length <= 0);
+
+ v = kmalloc(priv->config->length * sizeof(int) * count_coords,
+ GFP_KERNEL);
+ if (!v)
+ return NULL;
+
+ for (n = 0; n < count_coords; n++) {
+ priv->fifo[n] = v;
+ v += priv->config->length;
+ }
+
+ ts_filter_mean_clear(&priv->tsf);
+
+ dev_info(&pdev->dev, "Created Mean filter len:%d coords:%d\n",
+ priv->config->length, count_coords);
+
+ return &priv->tsf;
+}
+
+static void ts_filter_mean_destroy(struct ts_filter *tsf)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+ kfree(priv->fifo[0]); /* first guy has pointer from kmalloc */
+ kfree(tsf);
+}
+
+static void ts_filter_mean_clear(struct ts_filter *tsf)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+ priv->count = 0;
+ priv->curr = 0;
+ priv->ready = 0;
+ memset(priv->sum, 0, tsf->count_coords * sizeof(int));
+}
+
+static int ts_filter_mean_process(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+ int n;
+
+ BUG_ON(priv->ready);
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ priv->sum[n] += coords[n];
+ priv->fifo[n][priv->curr] = coords[n];
+ }
+
+ if (priv->count + 1 == priv->config->length)
+ priv->ready = 1;
+ else
+ priv->count++;
+
+ priv->curr = (priv->curr + 1) % priv->config->length;
+
+ return 0; /* No error. */
+}
+
+static int ts_filter_mean_haspoint(struct ts_filter *tsf)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+ return priv->ready;
+}
+
+static void ts_filter_mean_getpoint(struct ts_filter *tsf, int *point)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+ int n;
+
+ BUG_ON(!priv->ready);
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ point[n] = priv->sum[n];
+ priv->sum[n] -= priv->fifo[n][priv->curr];
+ }
+
+ priv->ready = 0;
+}
+
+static void ts_filter_mean_scale(struct ts_filter *tsf, int *coords)
+{
+ int n;
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ coords[n] += priv->config->length >> 1; /* Rounding. */
+ coords[n] /= priv->config->length;
+ }
+}
+
+const struct ts_filter_api ts_filter_mean_api = {
+ .create = ts_filter_mean_create,
+ .destroy = ts_filter_mean_destroy,
+ .clear = ts_filter_mean_clear,
+ .process = ts_filter_mean_process,
+ .scale = ts_filter_mean_scale,
+ .haspoint = ts_filter_mean_haspoint,
+ .getpoint = ts_filter_mean_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_mean_api);
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008 Andy Green <andy@openmoko.com>
+ *
+ *
+ * Median averaging stuff. We sort incoming raw samples into an array of
+ * MEDIAN_SIZE length, discarding the oldest sample each time once we are full.
+ * We then return the sum of the middle three samples for X and Y. It means
+ * the final result must be divided by (3 * scaling factor) to correct for
+ * avoiding the repeated /3.
+ *
+ * This strongly rejects brief excursions away from a central point that is
+ * sticky in time compared to the excursion duration.
+ *
+ * Thanks to Dale Schumacher (who wrote some example code) and Carl-Daniel
+ * Halifinger who pointed out this would be a good method.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/touchscreen/ts_filter_median.h>
+
+struct ts_filter_median {
+ /* Private configuration. */
+ struct ts_filter_median_configuration *config;
+ /* Generic Filter API. */
+ struct ts_filter tsf;
+
+ /* Count raw samples we get. */
+ int samples_count;
+ /*
+ * Remember the last coordinates we got in order to know if
+ * we are moving slow or fast.
+ */
+ int last_issued[MAX_TS_FILTER_COORDS];
+ /* How many samples in the sort buffer are valid. */
+ int valid;
+ /* Samples taken for median in sorted form. */
+ int *sort[MAX_TS_FILTER_COORDS];
+ /* Samples taken for median. */
+ int *fifo[MAX_TS_FILTER_COORDS];
+ /* Where we are in the fifo sample memory. */
+ int pos;
+ /* Do we have a sample to deliver? */
+ int ready;
+};
+
+#define ts_filter_to_filter_median(f) \
+ container_of(f, struct ts_filter_median, tsf)
+
+
+static void ts_filter_median_insert(int *p, int sample, int count)
+{
+ int n;
+
+ /* Search through what we got so far to find where to put sample. */
+ for (n = 0; n < count; n++)
+ if (sample < p[n]) { /* We met somebody bigger than us? */
+ /* Starting from the end, push bigger guys down one. */
+ for (count--; count >= n; count--)
+ p[count + 1] = p[count];
+ p[n] = sample; /* Put us in place of first bigger. */
+ return;
+ }
+
+ p[count] = sample; /* Nobody was bigger than us, add us on the end. */
+}
+
+static void ts_filter_median_del(int *p, int value, int count)
+{
+ int index;
+
+ for (index = 0; index < count; index++)
+ if (p[index] == value) {
+ for (; index < count; index++)
+ p[index] = p[index + 1];
+ return;
+ }
+}
+
+
+static void ts_filter_median_clear(struct ts_filter *tsf)
+{
+ struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+ tsfm->pos = 0;
+ tsfm->valid = 0;
+ tsfm->ready = 0;
+ memset(&tsfm->last_issued[0], 1, tsf->count_coords * sizeof(int));
+}
+
+static struct ts_filter *ts_filter_median_create(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *conf,
+ int count_coords)
+{
+ int *p;
+ int n;
+ struct ts_filter_median *tsfm = kzalloc(sizeof(struct ts_filter_median),
+ GFP_KERNEL);
+
+ if (!tsfm)
+ return NULL;
+
+ tsfm->config = container_of(conf,
+ struct ts_filter_median_configuration,
+ config);
+
+ tsfm->tsf.count_coords = count_coords;
+
+ tsfm->config->midpoint = (tsfm->config->extent >> 1) + 1;
+
+ p = kmalloc(2 * count_coords * sizeof(int) * (tsfm->config->extent + 1),
+ GFP_KERNEL);
+ if (!p) {
+ kfree(tsfm);
+ return NULL;
+ }
+
+ for (n = 0; n < count_coords; n++) {
+ tsfm->sort[n] = p;
+ p += tsfm->config->extent + 1;
+ tsfm->fifo[n] = p;
+ p += tsfm->config->extent + 1;
+ }
+
+ ts_filter_median_clear(&tsfm->tsf);
+
+ dev_info(&pdev->dev,
+ "Created Median filter len:%d coords:%d dec_threshold:%d\n",
+ tsfm->config->extent, count_coords,
+ tsfm->config->decimation_threshold);
+
+ return &tsfm->tsf;
+}
+
+static void ts_filter_median_destroy(struct ts_filter *tsf)
+{
+ struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+ kfree(tsfm->sort[0]); /* First guy has pointer from kmalloc. */
+ kfree(tsf);
+}
+
+static void ts_filter_median_scale(struct ts_filter *tsf, int *coords)
+{
+ int n;
+
+ for (n = 0; n < tsf->count_coords; n++)
+ coords[n] = (coords[n] + 2) / 3;
+}
+
+/*
+ * Give us the raw sample data coords, and if we return 1 then you can
+ * get a filtered coordinate from coords. If we return 0 you didn't
+ * fill all the filters with samples yet.
+ */
+
+static int ts_filter_median_process(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+ int n;
+ int movement = 1;
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ /* Grab copy in insertion order to remove when oldest. */
+ tsfm->fifo[n][tsfm->pos] = coords[n];
+ /* Insert these samples in sorted order in the median arrays. */
+ ts_filter_median_insert(tsfm->sort[n], coords[n], tsfm->valid);
+ }
+ /* Move us on in the fifo. */
+ if (++tsfm->pos == (tsfm->config->extent + 1))
+ tsfm->pos = 0;
+
+ /* Have we finished a median sampling? */
+ if (++tsfm->valid < tsfm->config->extent)
+ goto process_exit; /* No valid sample to use. */
+
+ BUG_ON(tsfm->valid != tsfm->config->extent);
+
+ tsfm->valid--;
+
+ /*
+ * Sum the middle 3 in the median sorted arrays. We don't divide back
+ * down which increases the sum resolution by a factor of 3 until the
+ * scale API function is called.
+ */
+ for (n = 0; n < tsf->count_coords; n++)
+ /* Perform the deletion of the oldest sample. */
+ ts_filter_median_del(tsfm->sort[n], tsfm->fifo[n][tsfm->pos],
+ tsfm->valid);
+
+ tsfm->samples_count--;
+ if (tsfm->samples_count >= 0)
+ goto process_exit;
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ /* Give the coordinate result from summing median 3. */
+ coords[n] = tsfm->sort[n][tsfm->config->midpoint - 1] +
+ tsfm->sort[n][tsfm->config->midpoint] +
+ tsfm->sort[n][tsfm->config->midpoint + 1];
+
+ movement += abs(tsfm->last_issued[n] - coords[n]);
+ }
+
+ if (movement > tsfm->config->decimation_threshold) /* Moving fast. */
+ tsfm->samples_count = tsfm->config->decimation_above;
+ else
+ tsfm->samples_count = tsfm->config->decimation_below;
+
+ memcpy(&tsfm->last_issued[0], coords, tsf->count_coords * sizeof(int));
+
+ tsfm->ready = 1;
+
+process_exit:
+ return 0;
+}
+
+static int ts_filter_median_haspoint(struct ts_filter *tsf)
+{
+ struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+ return priv->ready;
+}
+
+static void ts_filter_median_getpoint(struct ts_filter *tsf, int *point)
+{
+ struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+ BUG_ON(!priv->ready);
+
+ memcpy(point, &priv->last_issued[0], tsf->count_coords * sizeof(int));
+
+ priv->ready = 0;
+}
+
+const struct ts_filter_api ts_filter_median_api = {
+ .create = ts_filter_median_create,
+ .destroy = ts_filter_median_destroy,
+ .clear = ts_filter_median_clear,
+ .process = ts_filter_median_process,
+ .scale = ts_filter_median_scale,
+ .haspoint = ts_filter_median_haspoint,
+ .getpoint = ts_filter_median_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_median_api);
+
--- /dev/null
+/*
+ * LED driver for the vibrator of the Openmoko GTA01/GTA02 GSM Phones
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Javi Roman <javiroman@kernel-labs.org>:
+ * Implement PWM support for GTA01Bv4 and later
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <plat/pwm.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <plat/regs-timer.h>
+#include <linux/gta02-vibrator.h>
+
+#define COUNTER 64
+
+static struct gta02_vib_priv {
+ struct led_classdev cdev;
+ unsigned int gpio;
+ spinlock_t lock;
+ unsigned int has_pwm;
+ struct s3c2410_pwm pwm;
+
+ unsigned long vib_gpio_pin; /* which pin to meddle with */
+ u8 vib_pwm; /* 0 = OFF -- will ensure GPIO deasserted and stop FIQ */
+ u8 vib_pwm_latched;
+ u32 fiq_count;
+
+ struct gta02_vib_platform_data *pdata;
+} gta02_vib_priv;
+
+int gta02_vibrator_fiq_handler(void)
+{
+ gta02_vib_priv.fiq_count++;
+
+ if (!gta02_vib_priv.vib_pwm_latched && !gta02_vib_priv.vib_pwm)
+ /* idle */
+ return 0;
+
+ if ((u8)gta02_vib_priv.fiq_count == gta02_vib_priv.vib_pwm_latched)
+ s3c2410_gpio_setpin(gta02_vib_priv.vib_gpio_pin, 0);
+
+ if ((u8)gta02_vib_priv.fiq_count)
+ return 1;
+
+ gta02_vib_priv.vib_pwm_latched = gta02_vib_priv.vib_pwm;
+ if (gta02_vib_priv.vib_pwm_latched)
+ s3c2410_gpio_setpin(gta02_vib_priv.vib_gpio_pin, 1);
+
+ return 1;
+}
+
+static void gta02_vib_vib_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ gta02_vib_priv.vib_pwm = value; /* set it for FIQ */
+ gta02_vib_priv.pdata->kick_fiq(); /* start up FIQs if not already going */
+}
+
+static struct gta02_vib_priv gta02_vib_led = {
+ .cdev = {
+ .name = "gta02:vibrator",
+ .brightness_set = gta02_vib_vib_set,
+ },
+};
+
+static int gta02_vib_init_hw(struct gta02_vib_priv *vp)
+{
+ int rc;
+
+ rc = s3c2410_pwm_init(&vp->pwm);
+ if (rc)
+ return rc;
+
+ vp->pwm.timerid = PWM3;
+ /* use same prescaler as arch/arm/plat-s3c24xx/time.c */
+ vp->pwm.prescaler = (6 - 1) / 2;
+ vp->pwm.divider = S3C2410_TCFG1_MUX3_DIV2;
+ vp->pwm.counter = COUNTER;
+ vp->pwm.comparer = COUNTER;
+
+ rc = s3c2410_pwm_enable(&vp->pwm);
+ if (rc)
+ return rc;
+
+ s3c2410_pwm_start(&vp->pwm);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int gta02_vib_suspend(struct platform_device *dev, pm_message_t state)
+{
+ led_classdev_suspend(>a02_vib_led.cdev);
+ if (gta02_vib_priv.pdata)
+ gta02_vib_priv.pdata->disable_fiq();
+ return 0;
+}
+
+static int gta02_vib_resume(struct platform_device *dev)
+{
+ struct gta02_vib_priv *vp = platform_get_drvdata(dev);
+
+ if (vp->has_pwm)
+ gta02_vib_init_hw(vp);
+
+ led_classdev_resume(>a02_vib_led.cdev);
+ if (gta02_vib_priv.pdata)
+ gta02_vib_priv.pdata->enable_fiq();
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static int __init gta02_vib_probe(struct platform_device *pdev)
+{
+ struct resource *r;
+
+ r = platform_get_resource(pdev, 0, 0);
+ if (!r || !r->start)
+ return -EIO;
+
+ gta02_vib_led.gpio = r->start;
+
+ gta02_vib_priv.pdata = pdev->dev.platform_data;
+ platform_set_drvdata(pdev, >a02_vib_led);
+
+ s3c2410_gpio_setpin(gta02_vib_led.gpio, 0); /* off */
+ s3c2410_gpio_cfgpin(gta02_vib_led.gpio, S3C2410_GPIO_OUTPUT);
+ /* safe, kmalloc'd copy needed for FIQ ISR */
+ gta02_vib_priv.vib_gpio_pin = gta02_vib_led.gpio;
+ gta02_vib_priv.vib_pwm = 0; /* off */
+ spin_lock_init(>a02_vib_led.lock);
+
+ return led_classdev_register(&pdev->dev, >a02_vib_led.cdev);
+}
+
+static int gta02_vib_remove(struct platform_device *pdev)
+{
+ gta02_vib_priv.vib_pwm = 0; /* off */
+ /* would only need kick if already off so no kick needed */
+
+ if (gta02_vib_led.has_pwm)
+ s3c2410_pwm_disable(>a02_vib_led.pwm);
+
+ led_classdev_unregister(>a02_vib_led.cdev);
+
+ return 0;
+}
+
+static struct platform_driver gta02_vib_driver = {
+ .probe = gta02_vib_probe,
+ .remove = gta02_vib_remove,
+#ifdef CONFIG_PM
+ .suspend = gta02_vib_suspend,
+ .resume = gta02_vib_resume,
+#endif
+ .driver = {
+ .name = "gta02-vibrator",
+ },
+};
+
+static int __init gta02_vib_init(void)
+{
+ return platform_driver_register(>a02_vib_driver);
+}
+
+static void __exit gta02_vib_exit(void)
+{
+ platform_driver_unregister(>a02_vib_driver);
+}
+
+module_init(gta02_vib_init);
+module_exit(gta02_vib_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner vibrator driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+config MFD_GLAMO
+ bool "Smedia Glamo 336x/337x support"
+ select MFD_CORE
+ help
+ This enables the core driver for the Smedia Glamo 336x/337x
+ multi-function device. It includes irq_chip demultiplex as
+ well as clock / power management and GPIO support.
+
+config MFD_GLAMO_FB
+ tristate "Smedia Glamo 336x/337x framebuffer support"
+ depends on FB && MFD_GLAMO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Frame buffer driver for the LCD controller in the Smedia Glamo
+ 336x/337x.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called glamofb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+config MFD_GLAMO_GPIO
+ tristate "Glamo GPIO support"
+ depends on MFD_GLAMO
+
+ help
+ Enable a bitbanging SPI adapter driver for the Smedia Glamo.
+
+config MFD_GLAMO_MCI
+ tristate "Glamo S3C SD/MMC Card Interface support"
+ depends on MFD_GLAMO && MMC && REGULATOR
+ help
+ This selects a driver for the MCI interface found in
+ the S-Media GLAMO chip, as used in Openmoko
+ neo1973 GTA-02.
+
+ If unsure, say N.
--- /dev/null
+#
+# Makefile for the Smedia Glamo framebuffer driver
+#
+
+obj-$(CONFIG_MFD_GLAMO) += glamo-core.o
+obj-$(CONFIG_MFD_GLAMO_GPIO) += glamo-gpio.o
+obj-$(CONFIG_MFD_GLAMO_SPI) += glamo-spi.o
+
+obj-$(CONFIG_MFD_GLAMO_FB) += glamo-fb.o
+obj-$(CONFIG_MFD_GLAMO_MCI) += glamo-mci.o
+
--- /dev/null
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/glamo.h>
+#include <linux/io.h>
+
+#include <linux/pm.h>
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+#define GLAMO_MEM_REFRESH_COUNT 0x100
+
+#define GLAMO_NR_IRQS 9
+
+#define GLAMO_IRQ_HOSTBUS 0
+#define GLAMO_IRQ_JPEG 1
+#define GLAMO_IRQ_MPEG 2
+#define GLAMO_IRQ_MPROC1 3
+#define GLAMO_IRQ_MPROC0 4
+#define GLAMO_IRQ_CMDQUEUE 5
+#define GLAMO_IRQ_2D 6
+#define GLAMO_IRQ_MMC 7
+#define GLAMO_IRQ_RISC 8
+
+/*
+ * Glamo internal settings
+ *
+ * We run the memory interface from the faster PLLB on 2.6.28 kernels and
+ * above. Couple of GTA02 users report trouble with memory bus when they
+ * upgraded from 2.6.24. So this parameter allows reversion to 2.6.24
+ * scheme if their Glamo chip needs it.
+ *
+ * you can override the faster default on kernel commandline using
+ *
+ * glamo3362.slow_memory=1
+ *
+ * for example
+ */
+
+static int slow_memory = 0;
+module_param(slow_memory, int, 0644);
+
+struct reg_range {
+ int start;
+ int count;
+ char *name;
+ unsigned dump : 1;
+};
+
+static const struct reg_range reg_range[] = {
+ { 0x0000, 0x76, "General", 1 },
+ { 0x0200, 0x18, "Host Bus", 1 },
+ { 0x0300, 0x38, "Memory", 1 },
+/* { 0x0400, 0x100, "Sensor", 0 }, */
+/* { 0x0500, 0x300, "ISP", 0 }, */
+/* { 0x0800, 0x400, "JPEG", 0 }, */
+/* { 0x0c00, 0xcc, "MPEG", 0 }, */
+ { 0x1100, 0xb2, "LCD 1", 1 },
+ { 0x1200, 0x64, "LCD 2", 1 },
+ { 0x1400, 0x42, "MMC", 1 },
+/* { 0x1500, 0x080, "MPU 0", 0 },
+ { 0x1580, 0x080, "MPU 1", 0 },
+ { 0x1600, 0x080, "Cmd Queue", 0 },
+ { 0x1680, 0x080, "RISC CPU", 0 },*/
+ { 0x1700, 0x400, "2D Unit", 1 },
+/* { 0x1b00, 0x900, "3D Unit", 0 }, */
+};
+
+static inline void __reg_write(struct glamo_core *glamo,
+ uint16_t reg, uint16_t val)
+{
+ writew(val, glamo->base + reg);
+}
+
+void glamo_reg_write(struct glamo_core *glamo,
+ uint16_t reg, uint16_t val)
+{
+ spin_lock(&glamo->lock);
+ __reg_write(glamo, reg, val);
+ spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL_GPL(glamo_reg_write);
+
+
+static inline uint16_t __reg_read(struct glamo_core *glamo,
+ uint16_t reg)
+{
+ return readw(glamo->base + reg);
+}
+
+uint16_t glamo_reg_read(struct glamo_core *glamo, uint16_t reg)
+{
+ uint16_t val;
+ spin_lock(&glamo->lock);
+ val = __reg_read(glamo, reg);
+ spin_unlock(&glamo->lock);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(glamo_reg_read);
+
+static void __reg_set_bit_mask(struct glamo_core *glamo,
+ uint16_t reg, uint16_t mask,
+ uint16_t val)
+{
+ uint16_t tmp;
+
+ val &= mask;
+
+ tmp = __reg_read(glamo, reg);
+ tmp &= ~mask;
+ tmp |= val;
+ __reg_write(glamo, reg, tmp);
+}
+
+static void reg_set_bit_mask(struct glamo_core *glamo,
+ uint16_t reg, uint16_t mask,
+ uint16_t val)
+{
+ spin_lock(&glamo->lock);
+ __reg_set_bit_mask(glamo, reg, mask, val);
+ spin_unlock(&glamo->lock);
+}
+
+static inline void __reg_set_bit(struct glamo_core *glamo,
+ uint16_t reg, uint16_t bit)
+{
+ uint16_t tmp;
+ tmp = __reg_read(glamo, reg);
+ tmp |= bit;
+ __reg_write(glamo, reg, tmp);
+}
+
+static inline void __reg_clear_bit(struct glamo_core *glamo,
+ uint16_t reg, uint16_t bit)
+{
+ uint16_t tmp;
+ tmp = __reg_read(glamo, reg);
+ tmp &= ~bit;
+ __reg_write(glamo, reg, tmp);
+}
+
+static void __reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values)
+{
+ uint16_t end;
+ for (end = reg + count * 2; reg < end; reg += 2, ++values)
+ __reg_write(glamo, reg, *values);
+}
+
+static void __reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values)
+{
+ uint16_t end;
+ for (end = reg + count * 2; reg < end; reg += 2, ++values)
+ *values = __reg_read(glamo, reg);
+}
+
+void glamo_reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values)
+{
+ spin_lock(&glamo->lock);
+ __reg_write_batch(glamo, reg, count, values);
+ spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_reg_write_batch);
+
+void glamo_reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values)
+{
+ spin_lock(&glamo->lock);
+ __reg_read_batch(glamo, reg, count, values);
+ spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_reg_read_batch);
+
+/***********************************************************************
+ * resources of sibling devices
+ ***********************************************************************/
+
+static struct resource glamo_fb_resources[] = {
+ {
+ .name = "glamo-fb-regs",
+ .start = GLAMO_REGOFS_LCD,
+ .end = GLAMO_REGOFS_MMC - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "glamo-fb-mem",
+ .start = GLAMO_OFFSET_FB,
+ .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource glamo_mmc_resources[] = {
+ {
+ .name = "glamo-mmc-regs",
+ .start = GLAMO_REGOFS_MMC,
+ .end = GLAMO_REGOFS_MPROC0 - 1,
+ .flags = IORESOURCE_MEM
+ }, {
+ .name = "glamo-mmc-mem",
+ .start = GLAMO_OFFSET_FB + GLAMO_FB_SIZE,
+ .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE +
+ GLAMO_MMC_BUFFER_SIZE - 1,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = GLAMO_IRQ_MMC,
+ .end = GLAMO_IRQ_MMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+enum glamo_cells {
+ GLAMO_CELL_FB,
+ GLAMO_CELL_MMC,
+ GLAMO_CELL_GPIO,
+};
+
+static const struct mfd_cell glamo_cells[] = {
+ [GLAMO_CELL_FB] = {
+ .name = "glamo-fb",
+ .num_resources = ARRAY_SIZE(glamo_fb_resources),
+ .resources = glamo_fb_resources,
+ },
+ [GLAMO_CELL_MMC] = {
+ .name = "glamo-mci",
+ .num_resources = ARRAY_SIZE(glamo_mmc_resources),
+ .resources = glamo_mmc_resources,
+ },
+ [GLAMO_CELL_GPIO] = {
+ .name = "glamo-gpio",
+ },
+};
+
+/***********************************************************************
+ * IRQ demultiplexer
+ ***********************************************************************/
+#define glamo_irq_bit(glamo, x) BIT(x - glamo->irq_base)
+
+static inline struct glamo_core *irq_to_glamo(unsigned int irq)
+{
+ return (struct glamo_core*)get_irq_chip_data(irq);
+}
+
+static void glamo_ack_irq(unsigned int irq)
+{
+ struct glamo_core *glamo = irq_to_glamo(irq);
+ /* clear interrupt source */
+ __reg_write(glamo, GLAMO_REG_IRQ_CLEAR, glamo_irq_bit(glamo, irq));
+}
+
+static void glamo_mask_irq(unsigned int irq)
+{
+ struct glamo_core *glamo = irq_to_glamo(irq);
+
+ /* clear bit in enable register */
+ __reg_clear_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, irq));
+}
+
+static void glamo_unmask_irq(unsigned int irq)
+{
+ struct glamo_core *glamo = irq_to_glamo(irq);
+
+ /* set bit in enable register */
+ __reg_set_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, irq));
+}
+
+static struct irq_chip glamo_irq_chip = {
+ .name = "glamo",
+ .ack = glamo_ack_irq,
+ .mask = glamo_mask_irq,
+ .unmask = glamo_unmask_irq,
+};
+
+static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct glamo_core *glamo = get_irq_desc_chip_data(desc);
+ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
+
+ if (unlikely(desc->status & IRQ_INPROGRESS)) {
+ desc->status |= (IRQ_PENDING | IRQ_MASKED);
+ desc->chip->mask(irq);
+ desc->chip->ack(irq);
+ return;
+ }
+ kstat_incr_irqs_this_cpu(irq, desc);
+
+ desc->chip->ack(irq);
+ desc->status |= IRQ_INPROGRESS;
+
+ do {
+ uint16_t irqstatus;
+ int i;
+
+ if (unlikely((desc->status &
+ (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
+ (IRQ_PENDING | IRQ_MASKED))) {
+ /* dealing with pending IRQ, unmasking */
+ desc->chip->unmask(irq);
+ desc->status &= ~IRQ_MASKED;
+ }
+
+ desc->status &= ~IRQ_PENDING;
+
+ /* read IRQ status register */
+ irqstatus = __reg_read(glamo, GLAMO_REG_IRQ_STATUS);
+ for (i = 0; i < 9; ++i) {
+ if (irqstatus & BIT(i))
+ generic_handle_irq(glamo->irq_base + i);
+ }
+
+ } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
+
+ desc->status &= ~IRQ_INPROGRESS;
+}
+
+/*
+sysfs
+*/
+
+static ssize_t regs_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct glamo_core *glamo = dev_get_drvdata(dev);
+ unsigned long reg = simple_strtoul(buf, &buf, 10);
+
+ printk(KERN_INFO"reg 0x%02lX <-- 0x%04lX\n",
+ reg, simple_strtoul(buf, NULL, 10));
+
+ glamo_reg_write(glamo, reg, simple_strtoul(buf, NULL, 10));
+
+ return count;
+}
+
+static ssize_t regs_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct glamo_core *glamo = dev_get_drvdata(dev);
+ int i, n;
+ char * end = buf;
+ const struct reg_range *rr = reg_range;
+
+ spin_lock(&glamo->lock);
+
+ for (i = 0; i < ARRAY_SIZE(reg_range); ++i, ++rr) {
+ if (!rr->dump)
+ continue;
+ end += sprintf(end, "\n%s\n", rr->name);
+ for (n = rr->start; n < rr->start + rr->count; n += 2) {
+ if ((n & 15) == 0)
+ end += sprintf(end, "\n%04X: ", n);
+ end += sprintf(end, "%04x ", __reg_read(glamo, n));
+ }
+ end += sprintf(end, "\n");
+ }
+ spin_unlock(&glamo->lock);
+
+ return end - buf;
+}
+
+static DEVICE_ATTR(regs, 0644, regs_read, regs_write);
+
+struct glamo_engine_reg_set {
+ uint16_t reg;
+ uint16_t mask_suspended;
+ uint16_t mask_enabled;
+};
+
+struct glamo_engine_desc {
+ const char *name;
+ uint16_t hostbus;
+ const struct glamo_engine_reg_set *regs;
+ int num_regs;
+};
+
+static const struct glamo_engine_reg_set glamo_lcd_regs[] = {
+ { GLAMO_REG_CLOCK_LCD,
+ GLAMO_CLOCK_LCD_EN_M5CLK |
+ GLAMO_CLOCK_LCD_DG_M5CLK |
+ GLAMO_CLOCK_LCD_EN_DMCLK,
+
+ GLAMO_CLOCK_LCD_EN_DHCLK |
+ GLAMO_CLOCK_LCD_EN_DCLK
+ },
+ { GLAMO_REG_CLOCK_GEN5_1,
+ GLAMO_CLOCK_GEN51_EN_DIV_DMCLK,
+
+ GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
+ GLAMO_CLOCK_GEN51_EN_DIV_DCLK
+ }
+};
+
+static const struct glamo_engine_reg_set glamo_mmc_regs[] = {
+ { GLAMO_REG_CLOCK_MMC,
+ GLAMO_CLOCK_MMC_EN_M9CLK |
+ GLAMO_CLOCK_MMC_DG_M9CLK,
+
+ GLAMO_CLOCK_MMC_EN_TCLK |
+ GLAMO_CLOCK_MMC_DG_TCLK
+ },
+ { GLAMO_REG_CLOCK_GEN5_1,
+ 0,
+ GLAMO_CLOCK_GEN51_EN_DIV_TCLK
+ }
+};
+
+static const struct glamo_engine_reg_set glamo_2d_regs[] = {
+ { GLAMO_REG_CLOCK_2D,
+ GLAMO_CLOCK_2D_EN_M7CLK |
+ GLAMO_CLOCK_2D_DG_M7CLK,
+
+ GLAMO_CLOCK_2D_EN_GCLK |
+ GLAMO_CLOCK_2D_DG_GCLK
+ },
+ { GLAMO_REG_CLOCK_GEN5_1,
+ 0,
+ GLAMO_CLOCK_GEN51_EN_DIV_GCLK,
+ }
+};
+
+static const struct glamo_engine_reg_set glamo_cmdq_regs[] = {
+ { GLAMO_REG_CLOCK_2D,
+ GLAMO_CLOCK_2D_EN_M6CLK,
+ 0
+ },
+};
+
+#define GLAMO_ENGINE(xname, xhostbus, xregs) { \
+ .name = xname, \
+ .hostbus = xhostbus, \
+ .num_regs = ARRAY_SIZE(xregs), \
+ .regs = xregs, \
+}
+
+static const struct glamo_engine_desc glamo_engines[] = {
+ [GLAMO_ENGINE_LCD] = GLAMO_ENGINE("LCD", GLAMO_HOSTBUS2_MMIO_EN_LCD,
+ glamo_lcd_regs),
+ [GLAMO_ENGINE_MMC] = GLAMO_ENGINE("MMC", GLAMO_HOSTBUS2_MMIO_EN_MMC,
+ glamo_mmc_regs),
+ [GLAMO_ENGINE_2D] = GLAMO_ENGINE("2D", GLAMO_HOSTBUS2_MMIO_EN_2D,
+ glamo_2d_regs),
+ [GLAMO_ENGINE_CMDQ] = GLAMO_ENGINE("CMDQ", GLAMO_HOSTBUS2_MMIO_EN_CQ,
+ glamo_cmdq_regs),
+};
+
+inline static const char *glamo_engine_name(enum glamo_engine engine)
+{
+ return glamo_engines[engine].name;
+}
+
+/***********************************************************************
+ * 'engine' support
+ ***********************************************************************/
+
+int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int i;
+ const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+ const struct glamo_engine_reg_set *reg;
+
+ switch(engine) {
+ case GLAMO_ENGINE_LCD:
+ case GLAMO_ENGINE_MMC:
+ case GLAMO_ENGINE_2D:
+ case GLAMO_ENGINE_CMDQ:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = engine_desc->regs;
+
+ __reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2),
+ engine_desc->hostbus);
+ for (i = engine_desc->num_regs; i; --i, ++reg)
+ __reg_set_bit(glamo, reg->reg, reg->mask_suspended | reg->mask_enabled);
+
+ return 0;
+}
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int ret = 0;
+
+ spin_lock(&glamo->lock);
+
+ if (glamo->engine_state[engine] != GLAMO_ENGINE_ENABLED) {
+ ret = __glamo_engine_enable(glamo, engine);
+ if (!ret)
+ glamo->engine_state[engine] = GLAMO_ENGINE_ENABLED;
+ }
+
+ spin_unlock(&glamo->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_enable);
+
+int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int i;
+ const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+ const struct glamo_engine_reg_set *reg;
+
+ switch(engine) {
+ case GLAMO_ENGINE_LCD:
+ case GLAMO_ENGINE_MMC:
+ case GLAMO_ENGINE_2D:
+ case GLAMO_ENGINE_CMDQ:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = engine_desc->regs;
+
+ __reg_clear_bit(glamo, GLAMO_REG_HOSTBUS(2),
+ engine_desc->hostbus);
+ for (i = engine_desc->num_regs; i; --i, ++reg)
+ __reg_clear_bit(glamo, reg->reg, reg->mask_suspended | reg->mask_enabled);
+
+ return 0;
+}
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int ret = 0;
+
+ spin_lock(&glamo->lock);
+
+ if (glamo->engine_state[engine] != GLAMO_ENGINE_DISABLED) {
+ ret = __glamo_engine_disable(glamo, engine);
+ if (!ret)
+ glamo->engine_state[engine] = GLAMO_ENGINE_DISABLED;
+ }
+
+ spin_unlock(&glamo->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_disable);
+
+int __glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int i;
+ const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+ const struct glamo_engine_reg_set *reg;
+
+ switch(engine) {
+ case GLAMO_ENGINE_LCD:
+ case GLAMO_ENGINE_MMC:
+ case GLAMO_ENGINE_2D:
+ case GLAMO_ENGINE_CMDQ:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = engine_desc->regs;
+
+ __reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2),
+ engine_desc->hostbus);
+ for (i = engine_desc->num_regs; i; --i, ++reg) {
+ __reg_set_bit(glamo, reg->reg, reg->mask_suspended);
+ __reg_clear_bit(glamo, reg->reg, reg->mask_enabled);
+ }
+
+ return 0;
+}
+
+int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int ret = 0;
+
+ spin_lock(&glamo->lock);
+
+ if (glamo->engine_state[engine] != GLAMO_ENGINE_SUSPENDED) {
+ ret = __glamo_engine_suspend(glamo, engine);
+ if (!ret)
+ glamo->engine_state[engine] = GLAMO_ENGINE_SUSPENDED;
+ }
+
+ spin_unlock(&glamo->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_suspend);
+
+static const struct glamo_script reset_regs[] = {
+ [GLAMO_ENGINE_LCD] = {
+ GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
+ },
+ [GLAMO_ENGINE_MMC] = {
+ GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET
+ },
+ [GLAMO_ENGINE_CMDQ] = {
+ GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_CQ_RESET
+ },
+ [GLAMO_ENGINE_2D] = {
+ GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET
+ },
+ [GLAMO_ENGINE_JPEG] = {
+ GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET
+ },
+};
+
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ uint16_t reg = reset_regs[engine].reg;
+ uint16_t val = reset_regs[engine].val;
+
+ if (engine >= ARRAY_SIZE(reset_regs)) {
+ dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
+ return;
+ }
+
+ spin_lock(&glamo->lock);
+ __reg_set_bit(glamo, reg, val);
+ __reg_clear_bit(glamo, reg, val);
+ spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reset);
+
+int glamo_pll_rate(struct glamo_core *glamo,
+ enum glamo_pll pll)
+{
+ uint16_t reg;
+ unsigned int osci = glamo->pdata->osci_clock_rate;
+
+ switch (pll) {
+ case GLAMO_PLL1:
+ reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
+ break;
+ case GLAMO_PLL2:
+ reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return osci*reg;
+}
+EXPORT_SYMBOL_GPL(glamo_pll_rate);
+
+int glamo_engine_reclock(struct glamo_core *glamo,
+ enum glamo_engine engine,
+ int hz)
+{
+ int pll;
+ uint16_t reg, mask, div;
+
+ if (!hz)
+ return -EINVAL;
+
+ switch (engine) {
+ case GLAMO_ENGINE_LCD:
+ pll = GLAMO_PLL1;
+ reg = GLAMO_REG_CLOCK_GEN7;
+ mask = 0xff;
+ break;
+ case GLAMO_ENGINE_MMC:
+ pll = GLAMO_PLL1;
+ reg = GLAMO_REG_CLOCK_GEN8;
+ mask = 0xff;
+ break;
+ default:
+ dev_warn(&glamo->pdev->dev,
+ "reclock of engine 0x%x not supported\n", engine);
+ return -EINVAL;
+ break;
+ }
+
+ pll = glamo_pll_rate(glamo, pll);
+
+ div = pll / hz;
+
+ if (div != 0 && pll / div <= hz)
+ --div;
+
+ if (div > mask)
+ div = mask;
+
+ dev_dbg(&glamo->pdev->dev,
+ "PLL %d, kHZ %d, div %d\n", pll, hz / 1000, div);
+
+ reg_set_bit_mask(glamo, reg, mask, div);
+ mdelay(5); /* wait some time to stabilize */
+
+ return pll / (div + 1);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reclock);
+
+/***********************************************************************
+ * script support
+ ***********************************************************************/
+
+#define GLAMO_SCRIPT_END 0xffff
+#define GLAMO_SCRIPT_WAIT 0xfffe
+#define GLAMO_SCRIPT_LOCK_PLL 0xfffd
+
+/*
+ * couple of people reported artefacts with 2.6.28 changes, this
+ * allows reversion to 2.6.24 settings
+*/
+static const uint16_t reg_0x200[] = {
+0xe03, /* 0 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xef0, /* 3 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xea0, /* 2 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xe50, /* 1 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xe00, /* 0 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xef3, /* 3 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xea3, /* 2 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xe53, /* 1 waits on Async BB R & W, Use PLL 2 for mem bus */
+};
+
+static int glamo_run_script(struct glamo_core *glamo,
+ const struct glamo_script *script, int len,
+ int may_sleep)
+{
+ int i;
+ const struct glamo_script *line = script;
+
+ for (i = 0; i < len; ++i, ++line) {
+ switch (line->reg) {
+ case GLAMO_SCRIPT_END:
+ return 0;
+ case GLAMO_SCRIPT_WAIT:
+ if (may_sleep)
+ msleep(line->val);
+ else
+ mdelay(line->val * 4);
+ break;
+ case GLAMO_SCRIPT_LOCK_PLL:
+ /* spin until PLLs lock */
+ while ((__reg_read(glamo, GLAMO_REG_PLL_GEN5) & 3) != 3);
+ break;
+ case 0x200:
+ __reg_write(glamo, line->reg, reg_0x200[slow_memory & 0x8]);
+ break;
+ default:
+ __reg_write(glamo, line->reg, line->val);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static const struct glamo_script glamo_init_script[] = {
+ { GLAMO_REG_CLOCK_HOST, 0x1000 },
+ { GLAMO_SCRIPT_WAIT, 2 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x1000 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x2000 },
+ { GLAMO_REG_CLOCK_LCD, 0x1000 },
+ { GLAMO_REG_CLOCK_MMC, 0x1000 },
+ { GLAMO_REG_CLOCK_ISP, 0x1000 },
+ { GLAMO_REG_CLOCK_ISP, 0x3000 },
+ { GLAMO_REG_CLOCK_JPEG, 0x1000 },
+ { GLAMO_REG_CLOCK_3D, 0x1000 },
+ { GLAMO_REG_CLOCK_3D, 0x3000 },
+ { GLAMO_REG_CLOCK_2D, 0x1000 },
+ { GLAMO_REG_CLOCK_2D, 0x3000 },
+ { GLAMO_REG_CLOCK_RISC1, 0x1000 },
+ { GLAMO_REG_CLOCK_MPEG, 0x1000 },
+ { GLAMO_REG_CLOCK_MPEG, 0x3000 },
+ { GLAMO_REG_CLOCK_MPROC, 0x1000 /*0x100f*/ },
+ { GLAMO_SCRIPT_WAIT, 2 },
+ { GLAMO_REG_CLOCK_HOST, 0x0000 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x0000 },
+ { GLAMO_REG_CLOCK_LCD, 0x0000 },
+ { GLAMO_REG_CLOCK_MMC, 0x0000 },
+ { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */
+ { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */
+ { GLAMO_SCRIPT_LOCK_PLL, 0 },
+ /*
+ * b9 of this register MUST be zero to get any interrupts on INT#
+ * the other set bits enable all the engine interrupt sources
+ */
+ { GLAMO_REG_IRQ_ENABLE, 0x0100 },
+ { GLAMO_REG_CLOCK_GEN6, 0x2000 },
+ { GLAMO_REG_CLOCK_GEN7, 0x0101 },
+ { GLAMO_REG_CLOCK_GEN8, 0x0100 },
+ { GLAMO_REG_CLOCK_HOST, 0x000d },
+ /*
+ * b7..b4 = 0 = no wait states on read or write
+ * b0 = 1 select PLL2 for Host interface, b1 = enable it
+ */
+ { GLAMO_REG_HOSTBUS(0), 0x0e03 /* this is replaced by script parser */ },
+ { GLAMO_REG_HOSTBUS(1), 0x07ff }, /* TODO: Disable all */
+ { GLAMO_REG_HOSTBUS(10), 0x0000 },
+ { GLAMO_REG_HOSTBUS(11), 0x4000 },
+ { GLAMO_REG_HOSTBUS(12), 0xf00e },
+
+ /* S-Media recommended "set tiling mode to 512 mode for memory access
+ * more efficiency when 640x480" */
+ { GLAMO_REG_MEM_TYPE, 0x0c74 }, /* 8MB, 16 word pg wr+rd */
+ { GLAMO_REG_MEM_GEN, 0xafaf }, /* 63 grants min + max */
+
+ { GLAMO_REG_MEM_TIMING1, 0x0108 },
+ { GLAMO_REG_MEM_TIMING2, 0x0010 }, /* Taa = 3 MCLK */
+ { GLAMO_REG_MEM_TIMING3, 0x0000 },
+ { GLAMO_REG_MEM_TIMING4, 0x0000 }, /* CE1# delay fall/rise */
+ { GLAMO_REG_MEM_TIMING5, 0x0000 }, /* UB# LB# */
+ { GLAMO_REG_MEM_TIMING6, 0x0000 }, /* OE# */
+ { GLAMO_REG_MEM_TIMING7, 0x0000 }, /* WE# */
+ { GLAMO_REG_MEM_TIMING8, 0x1002 }, /* MCLK delay, was 0x1000 */
+ { GLAMO_REG_MEM_TIMING9, 0x6006 },
+ { GLAMO_REG_MEM_TIMING10, 0x00ff },
+ { GLAMO_REG_MEM_TIMING11, 0x0001 },
+ { GLAMO_REG_MEM_POWER1, 0x0020 },
+ { GLAMO_REG_MEM_POWER2, 0x0000 },
+ { GLAMO_REG_MEM_DRAM1, 0x0000 },
+ { GLAMO_SCRIPT_WAIT, 1 },
+ { GLAMO_REG_MEM_DRAM1, 0xc100 },
+ { GLAMO_SCRIPT_WAIT, 1 },
+ { GLAMO_REG_MEM_DRAM1, 0xe100 },
+ { GLAMO_REG_MEM_DRAM2, 0x01d6 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x000b },
+};
+
+/* Find out if we can support this version of the Glamo chip */
+static int glamo_supported(struct glamo_core *glamo)
+{
+ uint16_t dev_id, rev_id;
+
+ dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID);
+ rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID);
+
+ switch (dev_id) {
+ case 0x3650:
+ switch (rev_id) {
+ case GLAMO_CORE_REV_A2:
+ break;
+ case GLAMO_CORE_REV_A0:
+ case GLAMO_CORE_REV_A1:
+ case GLAMO_CORE_REV_A3:
+ dev_warn(&glamo->pdev->dev, "untested core revision "
+ "%04x, your mileage may vary\n", rev_id);
+ break;
+ default:
+ dev_warn(&glamo->pdev->dev, "unknown glamo revision "
+ "%04x, your mileage may vary\n", rev_id);
+ }
+ break;
+ default:
+ dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n",
+ dev_id);
+ return 0;
+ }
+
+ dev_dbg(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x "
+ "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id,
+ glamo_pll_rate(glamo, GLAMO_PLL1),
+ glamo_pll_rate(glamo, GLAMO_PLL2));
+
+ return 1;
+}
+
+static int __init glamo_probe(struct platform_device *pdev)
+{
+ int ret = 0, irq;
+ struct glamo_core *glamo;
+ struct resource *mem;
+
+ glamo = kmalloc(GFP_KERNEL, sizeof(*glamo));
+ if (!glamo)
+ return -ENOMEM;
+
+ spin_lock_init(&glamo->lock);
+
+ glamo->pdev = pdev;
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ glamo->irq = platform_get_irq(pdev, 0);
+ glamo->pdata = pdev->dev.platform_data;
+
+ if (glamo->irq < 0) {
+ dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
+ ret = glamo->irq;
+ goto err_free;
+ }
+
+ if (!mem) {
+ dev_err(&pdev->dev, "Failed to get platform memory\n");
+ ret = -ENOENT;
+ goto err_free;
+ }
+
+ if (!glamo->pdata) {
+ dev_err(&pdev->dev, "Missing platform data\n");
+ ret = -ENOENT;
+ goto err_free;
+ }
+
+ /* only request the generic, hostbus and memory controller registers */
+ glamo->mem = request_mem_region(mem->start, GLAMO_REGOFS_VIDCAP,
+ pdev->name);
+
+ if (!glamo->mem) {
+ dev_err(&pdev->dev, "Failed to request io memory region\n");
+ ret = -ENOENT;
+ goto err_free;
+ }
+
+ glamo->base = ioremap(glamo->mem->start, resource_size(glamo->mem));
+ if (!glamo->base) {
+ dev_err(&pdev->dev, "Failed to ioremap() memory region\n");
+ goto err_release_mem_region;
+ }
+
+ /* confirm it isn't insane version */
+ if (!glamo_supported(glamo)) {
+ dev_err(&pdev->dev, "This version of the Glamo is not supported\n");
+ goto err_iounmap;
+ }
+
+ platform_set_drvdata(pdev, glamo);
+
+ /* sysfs */
+ ret = device_create_file(&pdev->dev, &dev_attr_regs);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to create sysfs file\n");
+ goto err_iounmap;
+ }
+
+ /* init the chip with canned register set */
+ glamo_run_script(glamo, glamo_init_script,
+ ARRAY_SIZE(glamo_init_script), 1);
+
+ /*
+ * finally set the mfd interrupts up
+ */
+ for (irq = glamo->irq_base; irq < glamo->irq_base + GLAMO_NR_IRQS; ++irq) {
+ set_irq_chip_and_handler(irq, &glamo_irq_chip, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ set_irq_chip_data(irq, glamo);
+ }
+
+ set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler);
+ set_irq_type(glamo->irq, IRQ_TYPE_EDGE_FALLING);
+ set_irq_chip_data(glamo->irq, glamo);
+ glamo->irq_works = 1;
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id, glamo_cells,
+ ARRAY_SIZE(glamo_cells), mem, glamo->irq_base);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
+ goto err_free_irqs;
+ }
+
+ dev_info(&glamo->pdev->dev, "Glamo core PLL1: %uHz, PLL2: %uHz\n",
+ glamo_pll_rate(glamo, GLAMO_PLL1),
+ glamo_pll_rate(glamo, GLAMO_PLL2));
+
+ return 0;
+
+err_free_irqs:
+ disable_irq(glamo->irq);
+ set_irq_chained_handler(glamo->irq, NULL);
+ set_irq_chip_data(glamo->irq, NULL);
+
+ for (irq = glamo->irq_base; irq < glamo->irq_base + GLAMO_NR_IRQS; irq++) {
+ set_irq_flags(irq, 0);
+ set_irq_chip(irq, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+err_iounmap:
+ iounmap(glamo->base);
+err_release_mem_region:
+ release_mem_region(glamo->mem->start, resource_size(glamo->mem));
+err_free:
+ platform_set_drvdata(pdev, NULL);
+ kfree(glamo);
+
+ return ret;
+}
+
+static int glamo_remove(struct platform_device *pdev)
+{
+ struct glamo_core *glamo = platform_get_drvdata(pdev);
+ int irq;
+
+ mfd_remove_devices(&pdev->dev);
+
+ disable_irq(glamo->irq);
+ set_irq_chained_handler(glamo->irq, NULL);
+ set_irq_chip_data(glamo->irq, NULL);
+
+ for (irq = glamo->irq_base; irq < glamo->irq_base + GLAMO_NR_IRQS; ++irq) {
+ set_irq_flags(irq, 0);
+ set_irq_chip(irq, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+
+ platform_set_drvdata(pdev, NULL);
+ iounmap(glamo->base);
+ release_mem_region(glamo->mem->start, resource_size(glamo->mem));
+ kfree(glamo);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+#if 0
+static struct glamo_script glamo_resume_script[] = {
+
+ { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */
+ { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */
+ { GLAMO_REG_DFT_GEN6, 1 },
+ { 0xfffe, 100 },
+ { 0xfffd, 0 },
+ { 0x200, 0x0e03 },
+
+ /*
+ * b9 of this register MUST be zero to get any interrupts on INT#
+ * the other set bits enable all the engine interrupt sources
+ */
+ { GLAMO_REG_IRQ_ENABLE, 0x01ff },
+ { GLAMO_REG_CLOCK_HOST, 0x0018 },
+ { GLAMO_REG_CLOCK_GEN5_1, 0x18b1 },
+
+ { GLAMO_REG_MEM_DRAM1, 0x0000 },
+ { 0xfffe, 1 },
+ { GLAMO_REG_MEM_DRAM1, 0xc100 },
+ { 0xfffe, 1 },
+ { GLAMO_REG_MEM_DRAM1, 0xe100 },
+ { GLAMO_REG_MEM_DRAM2, 0x01d6 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x000b },
+};
+#endif
+
+#if 0
+static void glamo_power(struct glamo_core *glamo)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&glamo->lock, flags);
+
+ /*
+Power management
+static const REG_VALUE_MASK_TYPE reg_powerOn[] =
+{
+ { REG_GEN_DFT6, REG_BIT_ALL, REG_DATA(1u << 0) },
+ { REG_GEN_PLL3, 0u, REG_DATA(1u << 13) },
+ { REG_GEN_MEM_CLK, REG_BIT_ALL, REG_BIT_EN_MOCACLK },
+ { REG_MEM_DRAM2, 0u, REG_BIT_EN_DEEP_POWER_DOWN },
+ { REG_MEM_DRAM1, 0u, REG_BIT_SELF_REFRESH }
+};
+
+static const REG_VALUE_MASK_TYPE reg_powerStandby[] =
+{
+ { REG_MEM_DRAM1, REG_BIT_ALL, REG_BIT_SELF_REFRESH },
+ { REG_GEN_MEM_CLK, 0u, REG_BIT_EN_MOCACLK },
+ { REG_GEN_PLL3, REG_BIT_ALL, REG_DATA(1u << 13) },
+ { REG_GEN_DFT5, REG_BIT_ALL, REG_DATA(1u << 0) }
+};
+
+static const REG_VALUE_MASK_TYPE reg_powerSuspend[] =
+{
+ { REG_MEM_DRAM2, REG_BIT_ALL, REG_BIT_EN_DEEP_POWER_DOWN },
+ { REG_GEN_MEM_CLK, 0u, REG_BIT_EN_MOCACLK },
+ { REG_GEN_PLL3, REG_BIT_ALL, REG_DATA(1u << 13) },
+ { REG_GEN_DFT5, REG_BIT_ALL, REG_DATA(1u << 0) }
+};
+*/
+ switch (new_state) {
+ case GLAMO_POWER_ON:
+
+ /*
+ * glamo state on resume is nondeterministic in some
+ * fundamental way, it has also been observed that the
+ * Glamo reset pin can get asserted by, eg, touching it with
+ * a scope probe. So the only answer is to roll with it and
+ * force an external reset on the Glamo during resume.
+ */
+
+
+ break;
+
+ case GLAMO_POWER_SUSPEND:
+
+ break;
+ }
+ spin_unlock_irqrestore(&glamo->lock, flags);
+}
+#endif
+
+static int glamo_suspend(struct device *dev)
+{
+ struct glamo_core *glamo = dev_get_drvdata(dev);
+ int n;
+
+ spin_lock(&glamo->lock);
+
+ /* nuke interrupts */
+ __reg_write(glamo, GLAMO_REG_IRQ_ENABLE, 0x200);
+
+ /* take down each engine before we kill mem and pll */
+ for (n = 0; n < __NUM_GLAMO_ENGINES; n++) {
+ if (glamo->engine_state != GLAMO_ENGINE_DISABLED)
+ __glamo_engine_disable(glamo, n);
+ }
+
+ /* enable self-refresh */
+
+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1,
+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
+ GLAMO_MEM_DRAM1_EN_GATE_CKE |
+ GLAMO_MEM_DRAM1_SELF_REFRESH |
+ GLAMO_MEM_REFRESH_COUNT);
+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1,
+ GLAMO_MEM_DRAM1_EN_MODEREG_SET |
+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
+ GLAMO_MEM_DRAM1_EN_GATE_CKE |
+ GLAMO_MEM_DRAM1_SELF_REFRESH |
+ GLAMO_MEM_REFRESH_COUNT);
+
+ /* force RAM into deep powerdown */
+ __reg_write(glamo, GLAMO_REG_MEM_DRAM2,
+ GLAMO_MEM_DRAM2_DEEP_PWRDOWN |
+ (7 << 6) | /* tRC */
+ (1 << 4) | /* tRP */
+ (1 << 2) | /* tRCD */
+ 2); /* CAS latency */
+
+ /* disable clocks to memory */
+ __reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0);
+
+ /* all dividers from OSCI */
+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0x400, 0x400);
+
+ /* PLL2 into bypass */
+ __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 12, 1 << 12);
+
+ __reg_write(glamo, GLAMO_BASIC_MMC_EN_TCLK_DLYA1, 0x0e00);
+
+ /* kill PLLS 1 then 2 */
+ __reg_write(glamo, GLAMO_REG_DFT_GEN5, 0x0001);
+ __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 13, 1 << 13);
+
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static int glamo_resume(struct device *dev)
+{
+ struct glamo_core *glamo = dev_get_drvdata(dev);
+ int n;
+
+ (glamo->pdata->glamo_external_reset)(0);
+ udelay(10);
+ (glamo->pdata->glamo_external_reset)(1);
+ mdelay(5);
+
+ spin_lock(&glamo->lock);
+
+ glamo_run_script(glamo, glamo_init_script,
+ ARRAY_SIZE(glamo_init_script), 0);
+
+
+ for (n = 0; n < __NUM_GLAMO_ENGINES; n++) {
+ switch (glamo->engine_state[n]) {
+ case GLAMO_ENGINE_SUSPENDED:
+ __glamo_engine_suspend(glamo, n);
+ break;
+ case GLAMO_ENGINE_ENABLED:
+ __glamo_engine_enable(glamo, n);
+ break;
+ default:
+ break;
+ }
+ }
+
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static struct dev_pm_ops glamo_pm_ops = {
+ .suspend = glamo_suspend,
+ .resume = glamo_resume,
+};
+
+#define GLAMO_PM_OPS (&glamo_pm_ops)
+
+#else
+#define GLAMO_PM_OPS NULL
+#endif
+
+static struct platform_driver glamo_driver = {
+ .probe = glamo_probe,
+ .remove = glamo_remove,
+ .driver = {
+ .name = "glamo3362",
+ .owner = THIS_MODULE,
+ .pm = GLAMO_PM_OPS,
+ },
+};
+
+static int __devinit glamo_init(void)
+{
+ return platform_driver_register(&glamo_driver);
+}
+
+static void __exit glamo_cleanup(void)
+{
+ platform_driver_unregister(&glamo_driver);
+}
+
+module_init(glamo_init);
+module_exit(glamo_cleanup);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x core/resource driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo3362");
--- /dev/null
+#ifndef __GLAMO_CORE_H
+#define __GLAMO_CORE_H
+
+#include <linux/mfd/glamo.h>
+
+/* for the time being, we put the on-screen framebuffer into the lowest
+ * VRAM space. This should make the code easily compatible with the various
+ * 2MB/4MB/8MB variants of the Smedia chips */
+#define GLAMO_OFFSET_VRAM 0x800000
+#define GLAMO_OFFSET_FB (GLAMO_OFFSET_VRAM)
+
+/* we only allocate the minimum possible size for the framebuffer to make
+ * sure we have sufficient memory for other functions of the chip */
+//#define GLAMO_FB_SIZE (640*480*4) /* == 0x12c000 */
+#define GLAMO_INTERNAL_RAM_SIZE 0x800000
+#define GLAMO_MMC_BUFFER_SIZE (64 * 1024)
+#define GLAMO_FB_SIZE (GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE)
+
+enum glamo_pll {
+ GLAMO_PLL1,
+ GLAMO_PLL2,
+};
+
+enum glamo_engine_state {
+ GLAMO_ENGINE_DISABLED,
+ GLAMO_ENGINE_SUSPENDED,
+ GLAMO_ENGINE_ENABLED,
+};
+
+struct glamo_core {
+ int irq;
+ int irq_base;
+ int irq_works; /* 0 means PCB does not support Glamo IRQ */
+ struct resource *mem;
+ void __iomem *base;
+ struct platform_device *pdev;
+ struct glamo_platform_data *pdata;
+ enum glamo_engine_state engine_state[__NUM_GLAMO_ENGINES];
+ spinlock_t lock;
+};
+
+struct glamo_script {
+ uint16_t reg;
+ uint16_t val;
+};
+
+int glamo_pll_rate(struct glamo_core *glamo, enum glamo_pll pll);
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine);
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_reclock(struct glamo_core *glamo,
+ enum glamo_engine engine, int ps);
+
+void glamo_reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values);
+void glamo_reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values);
+#endif /* __GLAMO_CORE_H */
--- /dev/null
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/mfd/glamo.h>
+
+#include <asm/div64.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+#include <linux/glamofb.h>
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+static void glamofb_program_mode(struct glamofb_handle* glamo);
+
+struct glamofb_handle {
+ struct glamo_core *core;
+ struct fb_info *fb;
+ struct device *dev;
+ struct resource *reg;
+ struct resource *fb_res;
+ char __iomem *base;
+ struct glamo_fb_platform_data *mach_info;
+ char __iomem *cursor_addr;
+ int cursor_on;
+ u_int32_t pseudo_pal[16];
+ spinlock_t lock_cmd;
+ int blank_mode;
+ int mode_set; /* 0 if the current display mode hasn't been set on the glamo */
+ int output_enabled; /* 0 if the video output is disabled */
+};
+
+static void glamo_output_enable(struct glamofb_handle *gfb) {
+ struct glamo_core *gcore = gfb->core;
+
+ if (gfb->output_enabled)
+ return;
+
+ /* enable the pixel clock if off */
+ glamo_engine_enable(gcore, GLAMO_ENGINE_LCD);
+
+ gfb->output_enabled = 1;
+ if (!gfb->mode_set)
+ glamofb_program_mode(gfb);
+}
+
+static void glamo_output_disable(struct glamofb_handle *gfb) {
+ struct glamo_core *gcore = gfb->core;
+
+ if (!gfb->output_enabled)
+ return;
+
+ /* enable the pixel clock if off */
+ glamo_engine_suspend(gcore, GLAMO_ENGINE_LCD);
+
+ gfb->output_enabled = 0;
+}
+
+
+static int reg_read(struct glamofb_handle *glamo,
+ u_int16_t reg)
+{
+ int i = 0;
+
+ for (i = 0; i != 2; i++)
+ nop();
+
+ return readw(glamo->base + reg);
+}
+
+static void reg_write(struct glamofb_handle *glamo,
+ u_int16_t reg, u_int16_t val)
+{
+ int i = 0;
+
+ for (i = 0; i != 2; i++)
+ nop();
+
+ writew(val, glamo->base + reg);
+}
+
+static struct glamo_script glamo_regs[] = {
+ { GLAMO_REG_LCD_MODE1, 0x0020 },
+ /* no display rotation, no hardware cursor, no dither, no gamma,
+ * no retrace flip, vsync low-active, hsync low active,
+ * no TVCLK, no partial display, hw dest color from fb,
+ * no partial display mode, LCD1, software flip, */
+ { GLAMO_REG_LCD_MODE2, 0x9020 },
+ /* video flip, no ptr, no ptr, dhclk off,
+ * normal mode, no cpuif,
+ * res, serial msb first, single fb, no fr ctrl,
+ * cpu if bits all zero, no crc
+ * 0000 0000 0010 0000 */
+ { GLAMO_REG_LCD_MODE3, 0x0b40 },
+ /* src data rgb565, res, 18bit rgb666
+ * 000 01 011 0100 0000 */
+ { GLAMO_REG_LCD_POLARITY, 0x440c },
+ /* DE high active, no cpu/lcd if, cs0 force low, a0 low active,
+ * np cpu if, 9bit serial data, sclk rising edge latch data
+ * 01 00 0 100 0 000 01 0 0 */
+ /* The following values assume 640*480@16bpp */
+ { GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */
+ { GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */
+ { GLAMO_REG_LCD_CURSOR_BASE1, 0xC000 }, /* cursor base address 15:0 */
+ { GLAMO_REG_LCD_CURSOR_BASE2, 0x0012 }, /* cursor base address 22:16 */
+ { GLAMO_REG_LCD_COMMAND2, 0x0000 }, /* display page A */
+};
+
+static int glamofb_run_script(struct glamofb_handle *glamo,
+ struct glamo_script *script, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ struct glamo_script *line = &script[i];
+
+ if (line->reg == 0xffff)
+ return 0;
+ else if (line->reg == 0xfffe)
+ msleep(line->val);
+ else
+ reg_write(glamo, script[i].reg, script[i].val);
+ }
+
+ return 0;
+}
+
+static int glamofb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct glamofb_handle *glamo = info->par;
+
+ if (var->bits_per_pixel != 16)
+ var->bits_per_pixel = 16;
+
+ var->height = glamo->mach_info->height;
+ var->width = glamo->mach_info->width;
+
+ /* FIXME: set rgb positions */
+ switch (var->bits_per_pixel) {
+ case 16:
+ switch (reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) {
+ case GLAMO_LCD_SRC_RGB565:
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->red.length = 5;
+ var->green.length = 6;
+ var->blue.length = 5;
+ var->transp.length = 0;
+ break;
+ case GLAMO_LCD_SRC_ARGB1555:
+ var->transp.offset = 15;
+ var->red.offset = 10;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->transp.length = 1;
+ var->red.length = 5;
+ var->green.length = 5;
+ var->blue.length = 5;
+ break;
+ case GLAMO_LCD_SRC_ARGB4444:
+ var->transp.offset = 12;
+ var->red.offset = 8;
+ var->green.offset = 4;
+ var->blue.offset = 0;
+ var->transp.length = 4;
+ var->red.length = 4;
+ var->green.length = 4;
+ var->blue.length = 4;
+ break;
+ }
+ break;
+ case 24:
+ case 32:
+ default:
+ /* The Smedia Glamo doesn't support anything but 16bit color */
+ printk(KERN_ERR
+ "Smedia driver does not [yet?] support 24/32bpp\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void reg_set_bit_mask(struct glamofb_handle *glamo,
+ u_int16_t reg, u_int16_t mask,
+ u_int16_t val)
+{
+ u_int16_t tmp;
+
+ val &= mask;
+
+ tmp = reg_read(glamo, reg);
+ tmp &= ~mask;
+ tmp |= val;
+ reg_write(glamo, reg, tmp);
+}
+
+#define GLAMO_LCD_WIDTH_MASK 0x03FF
+#define GLAMO_LCD_HEIGHT_MASK 0x03FF
+#define GLAMO_LCD_PITCH_MASK 0x07FE
+#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF
+
+/* the caller has to enxure lock_cmd is held and we are in cmd mode */
+static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation)
+{
+ int glamo_rot;
+
+ switch (rotation) {
+ case FB_ROTATE_CW:
+ glamo_rot = GLAMO_LCD_ROT_MODE_90;
+ break;
+ case FB_ROTATE_UD:
+ glamo_rot = GLAMO_LCD_ROT_MODE_180;
+ break;
+ case FB_ROTATE_CCW:
+ glamo_rot = GLAMO_LCD_ROT_MODE_270;
+ break;
+ default:
+ glamo_rot = GLAMO_LCD_ROT_MODE_0;
+ break;
+ }
+
+ reg_set_bit_mask(glamo,
+ GLAMO_REG_LCD_WIDTH,
+ GLAMO_LCD_ROT_MODE_MASK,
+ glamo_rot);
+ reg_set_bit_mask(glamo,
+ GLAMO_REG_LCD_MODE1,
+ GLAMO_LCD_MODE1_ROTATE_EN,
+ (glamo_rot != GLAMO_LCD_ROT_MODE_0) ?
+ GLAMO_LCD_MODE1_ROTATE_EN : 0);
+}
+
+static void glamofb_program_mode(struct glamofb_handle* gfb) {
+ int sync, bp, disp, fp, total;
+ unsigned long flags;
+ struct glamo_core *gcore = gfb->core;
+ struct fb_var_screeninfo *var = &gfb->fb->var;
+
+ dev_dbg(&gcore->pdev->dev,
+ "glamofb_program_mode spin_lock_irqsave\n");
+ spin_lock_irqsave(&gfb->lock_cmd, flags);
+
+ if (glamofb_cmd_mode(gfb, 1))
+ goto out_unlock;
+
+ if (var->pixclock)
+ glamo_engine_reclock(gcore,
+ GLAMO_ENGINE_LCD,
+ (1000000000UL / gfb->fb->var.pixclock) * 1000);
+
+ reg_set_bit_mask(gfb,
+ GLAMO_REG_LCD_WIDTH,
+ GLAMO_LCD_WIDTH_MASK,
+ var->xres);
+ reg_set_bit_mask(gfb,
+ GLAMO_REG_LCD_HEIGHT,
+ GLAMO_LCD_HEIGHT_MASK,
+ var->yres);
+ reg_set_bit_mask(gfb,
+ GLAMO_REG_LCD_PITCH,
+ GLAMO_LCD_PITCH_MASK,
+ gfb->fb->fix.line_length);
+
+ /* honour the rotation request */
+ __rotate_lcd(gfb, var->rotate);
+
+ /* update scannout timings */
+ sync = 0;
+ bp = sync + var->hsync_len;
+ disp = bp + var->left_margin;
+ fp = disp + var->xres;
+ total = fp + var->right_margin;
+
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_TOTAL,
+ GLAMO_LCD_HV_TOTAL_MASK, total);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_START,
+ GLAMO_LCD_HV_RETR_START_MASK, sync);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_END,
+ GLAMO_LCD_HV_RETR_END_MASK, bp);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_START,
+ GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_END,
+ GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+ sync = 0;
+ bp = sync + var->vsync_len;
+ disp = bp + var->upper_margin;
+ fp = disp + var->yres;
+ total = fp + var->lower_margin;
+
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_TOTAL,
+ GLAMO_LCD_HV_TOTAL_MASK, total);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_START,
+ GLAMO_LCD_HV_RETR_START_MASK, sync);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_END,
+ GLAMO_LCD_HV_RETR_END_MASK, bp);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_START,
+ GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_END,
+ GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+ glamofb_cmd_mode(gfb, 0);
+
+ gfb->mode_set = 1;
+
+out_unlock:
+ dev_dbg(&gcore->pdev->dev,
+ "glamofb_program_mode spin_unlock_irqrestore\n");
+ spin_unlock_irqrestore(&gfb->lock_cmd, flags);
+}
+
+
+static int glamofb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ return 0;
+}
+
+static struct fb_videomode *glamofb_find_mode(struct fb_info *info,
+ struct fb_var_screeninfo *var) {
+ struct glamofb_handle *glamo = info->par;
+ struct glamo_fb_platform_data *mach_info = glamo->mach_info;
+ struct fb_videomode *mode;
+ int i;
+
+ for(i = mach_info->num_modes, mode = mach_info->modes; i > 0; --i, ++mode) {
+ if (mode->xres == var->xres &&
+ mode->yres == var->yres)
+ return mode;
+ }
+
+ return NULL;
+}
+
+static int glamofb_set_par(struct fb_info *info)
+{
+ struct glamofb_handle *glamo = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ struct fb_videomode *mode;
+
+ mode = glamofb_find_mode(info, var);
+ if (!mode)
+ return -EINVAL;
+
+ fb_videomode_to_var(var, mode);
+
+ info->mode = mode;
+
+ glamo->mode_set = 0;
+
+ switch(var->rotate) {
+ case FB_ROTATE_CW:
+ case FB_ROTATE_CCW:
+ info->fix.line_length = (var->yres * var->bits_per_pixel) / 8;
+ /* FIXME: Limit pixelclock */
+ var->pixclock *= 2;
+ break;
+ default:
+ info->fix.line_length = (var->xres * var->bits_per_pixel) / 8;
+ break;
+ }
+
+ if(glamo->output_enabled)
+ glamofb_program_mode(glamo);
+
+ return 0;
+}
+
+static int glamofb_blank(int blank_mode, struct fb_info *info)
+{
+ struct glamofb_handle *gfb = info->par;
+
+ dev_dbg(gfb->dev, "glamofb_blank(%u)\n", blank_mode);
+
+ switch (blank_mode) {
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ /* FIXME: add pdata hook/flag to indicate whether
+ * we should already switch off pixel clock here */
+ break;
+ case FB_BLANK_POWERDOWN:
+ /* disable the pixel clock */
+ glamo_output_disable(gfb);
+ gfb->blank_mode = blank_mode;
+ break;
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ glamo_output_enable(gfb);
+ gfb->blank_mode = blank_mode;
+ break;
+ }
+
+ /* FIXME: once we have proper clock management in glamo-core,
+ * we can determine if other units need MCLK1 or the PLL, and
+ * disable it if not used. */
+ return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+ struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+static int glamofb_setcolreg(unsigned regno,
+ unsigned red, unsigned green, unsigned blue,
+ unsigned transp, struct fb_info *info)
+{
+ struct glamofb_handle *glamo = info->par;
+ unsigned int val;
+
+ switch (glamo->fb->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ case FB_VISUAL_DIRECTCOLOR:
+ /* true-colour, use pseuo-palette */
+
+ if (regno < 16) {
+ u32 *pal = glamo->fb->pseudo_palette;
+
+ val = chan_to_field(red, &glamo->fb->var.red);
+ val |= chan_to_field(green, &glamo->fb->var.green);
+ val |= chan_to_field(blue, &glamo->fb->var.blue);
+
+ pal[regno] = val;
+ };
+ break;
+ default:
+ return 1; /* unknown type */
+ }
+
+ return 0;
+}
+
+static int glamofb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg) {
+ struct glamofb_handle *gfb = (struct glamofb_handle*)info->par;
+ struct glamo_core *gcore = gfb->core;
+ int retval = -ENOTTY;
+
+ switch (cmd) {
+ case GLAMOFB_ENGINE_ENABLE:
+ retval = glamo_engine_enable(gcore, arg);
+ break;
+ case GLAMOFB_ENGINE_DISABLE:
+ retval = glamo_engine_disable(gcore, arg);
+ break;
+ case GLAMOFB_ENGINE_RESET:
+ glamo_engine_reset(gcore, arg);
+ retval = 0;
+ break;
+ default:
+ break;
+ }
+
+ return retval;
+}
+
+
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+static inline void glamofb_vsync_wait(struct glamofb_handle *glamo,
+ int line, int size, int range)
+{
+ int count[2];
+
+ do {
+ count[0] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
+ count[1] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
+ } while (count[0] != count[1] ||
+ (line < count[0] + range &&
+ size > count[0] - range) ||
+ count[0] < range * 2);
+}
+
+/*
+ * Enable/disable the hardware cursor mode altogether
+ * (for blinking and such, use glamofb_cursor()).
+ */
+static void glamofb_cursor_onoff(struct glamofb_handle *glamo, int on)
+{
+ int y, size;
+
+ if (glamo->cursor_on) {
+ y = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_POS);
+ size = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE);
+
+ glamofb_vsync_wait(glamo, y, size, 30);
+ }
+
+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1,
+ GLAMO_LCD_MODE1_CURSOR_EN,
+ on ? GLAMO_LCD_MODE1_CURSOR_EN : 0);
+ glamo->cursor_on = on;
+
+ /* Hide the cursor by default */
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, 0);
+}
+
+static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ struct glamofb_handle *glamo = info->par;
+ unsigned long flags;
+
+ spin_lock_irqsave(&glamo->lock_cmd, flags);
+
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE,
+ cursor->enable ? cursor->image.width : 0);
+
+ if (cursor->set & FB_CUR_SETPOS) {
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS,
+ cursor->image.dx);
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS,
+ cursor->image.dy);
+ }
+
+ if (cursor->set & FB_CUR_SETCMAP) {
+ uint16_t fg = glamo->pseudo_pal[cursor->image.fg_color];
+ uint16_t bg = glamo->pseudo_pal[cursor->image.bg_color];
+
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg);
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg);
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, fg);
+ }
+
+ if (cursor->set & FB_CUR_SETHOT)
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET,
+ (cursor->hot.x << 8) | cursor->hot.y);
+
+ if ((cursor->set & FB_CUR_SETSIZE) ||
+ (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) {
+ int x, y, pitch, op;
+ const uint8_t *pcol = cursor->image.data;
+ const uint8_t *pmsk = cursor->mask;
+ uint8_t __iomem *dst = glamo->cursor_addr;
+ uint8_t dcol = 0;
+ uint8_t dmsk = 0;
+ uint8_t byte = 0;
+
+ if (cursor->image.depth > 1) {
+ spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+ return -EINVAL;
+ }
+
+ pitch = ((cursor->image.width + 7) >> 2) & ~1;
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH,
+ pitch);
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE,
+ cursor->image.height);
+
+ for (y = 0; y < cursor->image.height; y++) {
+ byte = 0;
+ for (x = 0; x < cursor->image.width; x++) {
+ if ((x % 8) == 0) {
+ dcol = *pcol++;
+ dmsk = *pmsk++;
+ } else {
+ dcol >>= 1;
+ dmsk >>= 1;
+ }
+
+ if (cursor->rop == ROP_COPY)
+ op = (dmsk & 1) ?
+ (dcol & 1) ? 1 : 3 : 0;
+ else
+ op = ((dmsk & 1) << 1) |
+ ((dcol & 1) << 0);
+ byte |= op << ((x & 3) << 1);
+
+ if (x % 4 == 3) {
+ writeb(byte, dst + x / 4);
+ byte = 0;
+ }
+ }
+ if (x % 4) {
+ writeb(byte, dst + x / 4);
+ byte = 0;
+ }
+
+ dst += pitch;
+ }
+ }
+
+ spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+
+ return 0;
+}
+#endif
+
+static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb)
+{
+ /* DGCMdQempty -- 1 == command queue is empty */
+ return reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15);
+}
+
+/* call holding gfb->lock_cmd when locking, until you unlock */
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on)
+{
+ int timeout = 2000000;
+
+ dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on);
+ if (on) {
+ dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ",
+ __func__);
+ while ((!glamofb_cmdq_empty(gfb)) && (timeout--))
+ cpu_relax();
+ if (timeout < 0) {
+ printk(KERN_ERR"*************"
+ "glamofb cmd_queue never got empty"
+ "*************\n");
+ return -EIO;
+ }
+ dev_dbg(gfb->dev, "empty!\n");
+
+ /* display the entire frame then switch to command */
+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+ GLAMO_LCD_CMD_TYPE_DISP |
+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC);
+
+ /* wait until lcd idle */
+ dev_dbg(gfb->dev, "waiting for lcd idle: ");
+ timeout = 2000000;
+ while ((!reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) &&
+ (timeout--))
+ cpu_relax();
+ if (timeout < 0) {
+ printk(KERN_ERR"*************"
+ "glamofb lcd never idle"
+ "*************\n");
+ return -EIO;
+ }
+
+ mdelay(100);
+
+ dev_dbg(gfb->dev, "cmd mode entered\n");
+
+ } else {
+ /* RGB interface needs vsync/hsync */
+ if (reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB)
+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+ GLAMO_LCD_CMD_TYPE_DISP |
+ GLAMO_LCD_CMD_DATA_DISP_SYNC);
+
+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+ GLAMO_LCD_CMD_TYPE_DISP |
+ GLAMO_LCD_CMD_DATA_DISP_FIRE);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_mode);
+
+
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val)
+{
+ int timeout = 200000;
+
+ dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", __func__);
+ while ((!glamofb_cmdq_empty(gfb)) && (timeout--))
+ yield();
+ if (timeout < 0) {
+ printk(KERN_ERR"*************"
+ "glamofb cmd_queue never got empty"
+ "*************\n");
+ return 1;
+ }
+ dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val);
+
+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_write);
+
+static struct fb_ops glamofb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = glamofb_check_var,
+ .fb_pan_display = glamofb_pan_display,
+ .fb_set_par = glamofb_set_par,
+ .fb_blank = glamofb_blank,
+ .fb_setcolreg = glamofb_setcolreg,
+ .fb_ioctl = glamofb_ioctl,
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+ .fb_cursor = glamofb_cursor,
+#endif
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+static int glamofb_init_regs(struct glamofb_handle *glamo)
+{
+ struct fb_info *info = glamo->fb;
+
+ glamofb_check_var(&info->var, info);
+ glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs));
+ glamofb_set_par(info);
+
+ return 0;
+}
+
+static int __init glamofb_probe(struct platform_device *pdev)
+{
+ int rc = -EIO;
+ struct fb_info *fbinfo;
+ struct glamofb_handle *glamofb;
+ struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
+ struct glamo_fb_platform_data *mach_info;
+
+ printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 "
+ "Openmoko, Inc.\n");
+
+ if (!core->pdata || !core->pdata->fb_data)
+ return -ENOENT;
+
+
+ fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev);
+ if (!fbinfo)
+ return -ENOMEM;
+
+
+ glamofb = fbinfo->par;
+ glamofb->fb = fbinfo;
+ glamofb->dev = &pdev->dev;
+
+ glamofb->blank_mode = FB_BLANK_POWERDOWN;
+
+ strcpy(fbinfo->fix.id, "SMedia Glamo");
+
+ glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "glamo-fb-regs");
+ if (!glamofb->reg) {
+ dev_err(&pdev->dev, "platform device with no registers?\n");
+ rc = -ENOENT;
+ goto out_free;
+ }
+
+ glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "glamo-fb-mem");
+ if (!glamofb->fb_res) {
+ dev_err(&pdev->dev, "platform device with no memory ?\n");
+ rc = -ENOENT;
+ goto out_free;
+ }
+
+ glamofb->reg = request_mem_region(glamofb->reg->start,
+ resource_size(glamofb->reg), pdev->name);
+ if (!glamofb->reg) {
+ dev_err(&pdev->dev, "failed to request mmio region\n");
+ goto out_free;
+ }
+
+ glamofb->fb_res = request_mem_region(glamofb->fb_res->start,
+ resource_size(glamofb->fb_res),
+ pdev->name);
+ if (!glamofb->fb_res) {
+ dev_err(&pdev->dev, "failed to request vram region\n");
+ goto out_release_reg;
+ }
+
+ /* we want to remap only the registers required for this core
+ * driver. */
+ glamofb->base = ioremap_nocache(glamofb->reg->start, resource_size(glamofb->reg));
+ if (!glamofb->base) {
+ dev_err(&pdev->dev, "failed to ioremap() mmio memory\n");
+ goto out_release_fb;
+ }
+
+ fbinfo->fix.smem_start = (unsigned long) glamofb->fb_res->start;
+ fbinfo->fix.smem_len = (__u32) resource_size(glamofb->fb_res);
+
+ fbinfo->screen_base = ioremap(glamofb->fb_res->start,
+ resource_size(glamofb->fb_res));
+ if (!fbinfo->screen_base) {
+ dev_err(&pdev->dev, "failed to ioremap() vram memory\n");
+ goto out_release_fb;
+ }
+ glamofb->cursor_addr = fbinfo->screen_base + 0x12C000;
+
+ platform_set_drvdata(pdev, glamofb);
+
+ mach_info = core->pdata->fb_data;
+ glamofb->core = core;
+ glamofb->mach_info = mach_info;
+
+ fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
+ fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
+ fbinfo->fix.type_aux = 0;
+ fbinfo->fix.xpanstep = 0;
+ fbinfo->fix.ypanstep = 0;
+ fbinfo->fix.ywrapstep = 0;
+ fbinfo->fix.accel = FB_ACCEL_GLAMO;
+
+
+ fbinfo->fbops = &glamofb_ops;
+ fbinfo->flags = FBINFO_FLAG_DEFAULT;
+ fbinfo->pseudo_palette = &glamofb->pseudo_pal;
+
+ fbinfo->mode = mach_info->modes;
+ fb_videomode_to_var(&fbinfo->var, fbinfo->mode);
+ fbinfo->var.bits_per_pixel = 16;
+ fbinfo->var.nonstd = 0;
+ fbinfo->var.activate = FB_ACTIVATE_NOW;
+ fbinfo->var.height = mach_info->height;
+ fbinfo->var.width = mach_info->width;
+ fbinfo->var.accel_flags = 0;
+ fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
+
+ glamo_engine_enable(core, GLAMO_ENGINE_LCD);
+ glamo_engine_reset(core, GLAMO_ENGINE_LCD);
+ glamofb->output_enabled = 1;
+ glamofb->mode_set = 1;
+
+ dev_info(&pdev->dev, "spin_lock_init\n");
+ spin_lock_init(&glamofb->lock_cmd);
+ glamofb_init_regs(glamofb);
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+ glamofb_cursor_onoff(glamofb, 1);
+#endif
+
+ fb_videomode_to_modelist(mach_info->modes, mach_info->num_modes,
+ &fbinfo->modelist);
+
+ rc = register_framebuffer(fbinfo);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "failed to register framebuffer\n");
+ goto out_unmap_fb;
+ }
+
+ printk(KERN_INFO "fb%d: %s frame buffer device\n",
+ fbinfo->node, fbinfo->fix.id);
+
+ return 0;
+
+out_unmap_fb:
+ iounmap(fbinfo->screen_base);
+ iounmap(glamofb->base);
+out_release_fb:
+ release_mem_region(glamofb->fb_res->start, resource_size(glamofb->fb_res));
+out_release_reg:
+ release_mem_region(glamofb->reg->start, resource_size(glamofb->reg));
+out_free:
+ framebuffer_release(fbinfo);
+ return rc;
+}
+
+static int glamofb_remove(struct platform_device *pdev)
+{
+ struct glamofb_handle *glamofb = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ iounmap(glamofb->base);
+ release_mem_region(glamofb->reg->start, resource_size(glamofb->reg));
+ kfree(glamofb);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int glamofb_suspend(struct device *dev)
+{
+ struct glamofb_handle *gfb = dev_get_drvdata(dev);
+
+ acquire_console_sem();
+ fb_set_suspend(gfb->fb, 1);
+ release_console_sem();
+
+ /* seriously -- nobody is allowed to touch glamo memory when we
+ * are suspended or we lock on nWAIT
+ */
+ /* iounmap(gfb->fb->screen_base); */
+
+ return 0;
+}
+
+static int glamofb_resume(struct device *dev)
+{
+ struct glamofb_handle *gfb = dev_get_drvdata(dev);
+
+ /* OK let's allow framebuffer ops again */
+ /* gfb->fb->screen_base = ioremap(gfb->fb_res->start,
+ resource_size(gfb->fb_res)); */
+ glamo_engine_enable(gfb->core, GLAMO_ENGINE_LCD);
+ glamo_engine_reset(gfb->core, GLAMO_ENGINE_LCD);
+
+ glamofb_init_regs(gfb);
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+ glamofb_cursor_onoff(gfb, 1);
+#endif
+
+ acquire_console_sem();
+ fb_set_suspend(gfb->fb, 0);
+ release_console_sem();
+
+ return 0;
+}
+
+static struct dev_pm_ops glamofb_pm_ops = {
+ .suspend = glamofb_suspend,
+ .resume = glamofb_resume,
+};
+
+#define GLAMOFB_PM_OPS (&glamofb_pm_ops)
+
+#else
+#define GLAMOFB_PM_OPS NULL
+#endif
+
+static struct platform_driver glamofb_driver = {
+ .probe = glamofb_probe,
+ .remove = glamofb_remove,
+ .driver = {
+ .name = "glamo-fb",
+ .owner = THIS_MODULE,
+ .pm = GLAMOFB_PM_OPS
+ },
+};
+
+static int __devinit glamofb_init(void)
+{
+ return platform_driver_register(&glamofb_driver);
+}
+
+static void __exit glamofb_cleanup(void)
+{
+ platform_driver_unregister(&glamofb_driver);
+}
+
+module_init(glamofb_init);
+module_exit(glamofb_cleanup);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* Smedia Glamo 336x/337x gpio driver
+ *
+ * (C) 2009 Lars-Peter Clausen
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/mfd/glamo.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+#define GLAMO_NR_GPIO 21
+#define GLAMO_NR_GPIO_REGS DIV_ROUND_UP(GLAMO_NR_GPIO, 4)
+
+#define GLAMO_REG_GPIO(x) (((x) * 2) + GLAMO_REG_GPIO_GEN1)
+
+struct glamo_gpio {
+ struct glamo_core *glamo;
+ struct gpio_chip chip;
+ uint16_t saved_regs[GLAMO_NR_GPIO_REGS];
+};
+
+#define REG_OF_GPIO(gpio) (GLAMO_REG_GPIO(gpio >> 2))
+#define NUM_OF_GPIO(gpio) (gpio & 0x3)
+#define DIRECTION_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 0))
+#define OUTPUT_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 4))
+#define INPUT_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 8))
+#define FUNC_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 12))
+
+
+static inline struct glamo_core *chip_to_glamo(struct gpio_chip *chip)
+{
+ return container_of(chip, struct glamo_gpio, chip)->glamo;
+}
+
+static void glamo_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ if (value)
+ tmp |= OUTPUT_BIT(offset);
+ else
+ tmp &= ~OUTPUT_BIT(offset);
+ writew(tmp, glamo->base + reg);
+ spin_unlock(&glamo->lock);
+}
+
+static int glamo_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ return readw(glamo->base + REG_OF_GPIO(offset)) & INPUT_BIT(offset) ? 1 : 0;
+}
+
+static int glamo_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ if ((tmp & FUNC_BIT(offset)) == 0) {
+ tmp |= FUNC_BIT(offset);
+ writew(tmp, glamo->base + reg);
+ }
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static void glamo_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ if ((tmp & FUNC_BIT(offset)) == 1) {
+ tmp &= ~FUNC_BIT(offset);
+ writew(tmp, glamo->base + reg);
+ }
+ spin_unlock(&glamo->lock);
+}
+
+static int glamo_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ tmp &= ~DIRECTION_BIT(offset);
+
+ if (value)
+ tmp |= OUTPUT_BIT(offset);
+ else
+ tmp &= ~OUTPUT_BIT(offset);
+
+ writew(tmp, glamo->base + reg);
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static int glamo_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ if ((tmp & DIRECTION_BIT(offset)) == 0) {
+ tmp |= DIRECTION_BIT(offset);
+ writew(tmp, glamo->base + reg);
+ }
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static const struct __devinit gpio_chip glamo_gpio_chip = {
+ .label = "glamo",
+ .request = glamo_gpio_request,
+ .free = glamo_gpio_free,
+ .direction_input = glamo_gpio_direction_input,
+ .get = glamo_gpio_get,
+ .direction_output = glamo_gpio_direction_output,
+ .set = glamo_gpio_set,
+ .base = -1,
+ .ngpio = GLAMO_NR_GPIO,
+ .can_sleep = 0,
+ .owner = THIS_MODULE,
+};
+
+static int __devinit glamo_gpio_probe(struct platform_device *pdev)
+{
+ struct glamo_platform_data *pdata = pdev->dev.parent->platform_data;
+ struct glamo_gpio *glamo_gpio;
+ int ret;
+
+ glamo_gpio = kzalloc(sizeof(struct glamo_gpio), GFP_KERNEL);
+ if (!glamo_gpio)
+ return -ENOMEM;
+
+ glamo_gpio->glamo = dev_get_drvdata(pdev->dev.parent);
+ glamo_gpio->chip = glamo_gpio_chip;
+ glamo_gpio->chip.dev = &pdev->dev;
+ if (pdata)
+ glamo_gpio->chip.base = pdata->gpio_base;
+
+ ret = gpiochip_add(&glamo_gpio->chip);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register gpio chip: %d\n", ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, glamo_gpio);
+
+ dev_info(&pdev->dev, "Glamo GPIO registered\n");
+
+ if (pdata->registered)
+ pdata->registered(&pdev->dev);
+
+ return 0;
+err:
+ kfree(glamo_gpio);
+ return ret;
+}
+
+static int __devexit glamo_gpio_remove(struct platform_device *pdev)
+{
+ struct glamo_gpio *glamo_gpio = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&glamo_gpio->chip);
+ if (!ret)
+ goto done;
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(glamo_gpio);
+
+done:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+static int glamo_gpio_suspend(struct device *dev)
+{
+ struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
+ struct glamo_core *glamo = glamo_gpio->glamo;
+ uint16_t *saved_regs = glamo_gpio->saved_regs;
+ int i;
+
+ spin_lock(&glamo->lock);
+ for (i = 0; i < GLAMO_NR_GPIO / 4; ++i)
+ saved_regs[i] = readw(glamo->base + GLAMO_REG_GPIO(i));
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static int glamo_gpio_resume(struct device *dev)
+{
+ struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
+ struct glamo_core *glamo = glamo_gpio->glamo;
+ uint16_t *saved_regs = glamo_gpio->saved_regs;
+ int i;
+
+ spin_lock(&glamo->lock);
+ for (i = 0; i < GLAMO_NR_GPIO_REGS; ++i)
+ writew(saved_regs[i], glamo->base + GLAMO_REG_GPIO(i));
+ spin_unlock(&glamo->lock);
+ return 0;
+}
+
+static const struct dev_pm_ops glamo_pm_ops = {
+ .suspend = glamo_gpio_suspend,
+ .resume = glamo_gpio_resume,
+ .freeze = glamo_gpio_suspend,
+ .thaw = glamo_gpio_resume,
+};
+
+#define GLAMO_GPIO_PM_OPS (&glamo_pm_ops)
+
+#else
+#define GLAMO_GPIO_PM_OPS NULL
+#endif
+
+static struct platform_driver glamo_gpio_driver = {
+ .driver = {
+ .name = "glamo-gpio",
+ .owner = THIS_MODULE,
+ .pm = GLAMO_GPIO_PM_OPS,
+ },
+ .probe = glamo_gpio_probe,
+ .remove = __devexit_p(glamo_gpio_remove),
+};
+
+static int __devinit glamo_gpio_init(void)
+{
+ return platform_driver_register(&glamo_gpio_driver);
+}
+
+static void __exit glamo_gpio_exit(void)
+{
+ platform_driver_unregister(&glamo_gpio_driver);
+}
+
+module_init(glamo_gpio_init);
+module_exit(glamo_gpio_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GPIO interface for the Glamo multimedia device");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo-gpio");
--- /dev/null
+/* Smedia Glamo 336x/337x gpio driver
+ *
+ * (C) 2009 Lars-Peter Clausen
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/mfd/glamo.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+#define GLAMO_NR_GPIOS 21
+#define GLAMO_NR_GPIO_REGS DIV_ROUND_UP(GLAMO_NR_GPIOS, 4)
+
+#define GLAMO_REG_GPIO(x) (((x) * 2) + GLAMO_REG_GPIO_GEN1)
+
+struct glamo_gpio {
+ struct glamo_core *glamo;
+ struct gpio_chip chip;
+ uint16_t saved_regs[GLAMO_NR_GPIO_REGS];
+};
+
+#define REG_OF_GPIO(gpio) (GLAMO_REG_GPIO(gpio >> 2))
+#define NUM_OF_GPIO(gpio) (gpio & 0x3)
+#define DIRECTION_BIT(gpio) BIT(NUM_OF_GPIO(gpio) + 0)
+#define OUTPUT_BIT(gpio) BIT(NUM_OF_GPIO(gpio) + 4)
+#define OUTPUT_VALUE(gpio, value) (value << (NUM_OF_GPIO(gpio) + 4))
+#define INPUT_BIT(gpio) BIT(NUM_OF_GPIO(gpio) + 8)
+#define FUNC_BIT(gpio) BIT(NUM_OF_GPIO(gpio) + 12)
+
+
+static inline struct glamo_core *chip_to_glamo(struct gpio_chip *chip)
+{
+ return container_of(chip, struct glamo_gpio, chip)->glamo;
+}
+
+static void glamo_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+
+ glamo_reg_set_bit_mask(reg, OUTPUT_VALUE(offset, !!value), OUTPUT_BIT(offset));
+}
+
+static int glamo_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ return !!(glamo_reg_read(glamo, REG_OF_GPIO(offset)) & INPUT_BIT(offset));
+}
+
+static int glamo_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+
+ glamo_reg_set_bit(glamo, reg, FUNC_BIT(offset));
+
+ return 0;
+}
+
+static void glamo_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+
+ glamo_reg_clear_bit(glamo, reg, FUNC_BIT(offset));
+}
+
+static int glamo_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ uint16_t mask = DIRECTION_BIT(offset) | OUTPUT_BIT(offset);
+ uint16_t value = DIRECTION_BIT(offset);
+
+ if (value)
+ value |= OUTPUT_BIT(offset);
+
+ glamo_reg_set_bit_mask(glamo, reg, mask, value);
+
+ return 0;
+}
+
+static int glamo_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+
+ glamo_reg_set_bit(glamo, reg, DIRECTION_BIT(offset));
+
+ return 0;
+}
+
+static const struct __devinit gpio_chip glamo_gpio_chip = {
+ .label = "glamo",
+ .request = glamo_gpio_request,
+ .free = glamo_gpio_free,
+ .direction_input = glamo_gpio_direction_input,
+ .get = glamo_gpio_get,
+ .direction_output = glamo_gpio_direction_output,
+ .set = glamo_gpio_set,
+ .base = -1,
+ .ngpio = GLAMO_NR_GPIOS,
+ .can_sleep = 0,
+ .owner = THIS_MODULE,
+};
+
+static int __devinit glamo_gpio_probe(struct platform_device *pdev)
+{
+ struct glamo_platform_data *pdata = pdev->dev.parent->platform_data;
+ struct glamo_gpio *glamo_gpio;
+ int ret;
+
+ glamo_gpio = kzalloc(sizeof(struct glamo_gpio), GFP_KERNEL);
+ if (!glamo_gpio)
+ return -ENOMEM;
+
+ glamo_gpio->glamo = dev_get_drvdata(pdev->dev.parent);
+ glamo_gpio->chip = glamo_gpio_chip;
+ glamo_gpio->chip.dev = &pdev->dev;
+ if (pdata)
+ glamo_gpio->chip.base = pdata->gpio_base;
+
+ ret = gpiochip_add(&glamo_gpio->chip);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register gpio chip: %d\n", ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, glamo_gpio);
+ return 0;
+err:
+ kfree(glamo_gpio);
+ return ret;
+}
+
+static int __devexit glamo_gpio_remove(struct platform_device *pdev)
+{
+ struct glamo_gpio *glamo_gpio = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&glamo_gpio->chip);
+ if (!ret)
+ goto done;
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(glamo_gpio);
+
+done:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+static int glamo_gpio_suspend(struct device *dev)
+{
+ struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
+ struct glamo_core *glamo = glamo_gpio->glamo;
+ uint16_t *saved_regs = glamo_gpio->saved_regs;
+ int i;
+
+ spin_lock(&glamo->lock);
+ for (i = 0; i < GLAMO_NR_GPIO_REGS; ++i)
+ saved_regs[i] = readw(glamo->base + GLAMO_REG_GPIO(i));
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static int glamo_gpio_resume(struct device *dev)
+{
+ struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
+ struct glamo_core *glamo = glamo_gpio->glamo;
+ uint16_t *saved_regs = glamo_gpio->saved_regs;
+ int i;
+
+ spin_lock(&glamo->lock);
+ for (i = 0; i < GLAMO_NR_GPIO_REGS; ++i)
+ writew(saved_regs[i], glamo->base + GLAMO_REG_GPIO(i));
+ spin_unlock(&glamo->lock);
+
+ printk("glamo-gpio resume\n");
+ return 0;
+}
+
+static const struct dev_pm_ops glamo_pm_ops = {
+ .suspend = glamo_gpio_suspend,
+ .resume = glamo_gpio_resume,
+ .freeze = glamo_gpio_suspend,
+ .thaw = glamo_gpio_resume,
+};
+
+#define GLAMO_GPIO_PM_OPS (&glamo_pm_ops)
+
+#else
+#define GLAMO_GPIO_PM_OPS NULL
+#endif
+
+static struct platform_driver glamo_gpio_driver = {
+ .driver = {
+ .name = "glamo-gpio",
+ .owner = THIS_MODULE,
+ .pm = GLAMO_GPIO_PM_OPS,
+ },
+ .probe = glamo_gpio_probe,
+ .remove = __devexit_p(glamo_gpio_remove),
+};
+
+static int __devinit glamo_gpio_init(void)
+{
+ return platform_driver_register(&glamo_gpio_driver);
+}
+
+static void __exit glamo_gpio_exit(void)
+{
+ platform_driver_unregister(&glamo_gpio_driver);
+}
+
+module_init(glamo_gpio_init);
+module_exit(glamo_gpio_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GPIO interface for the Glamo multimedia device");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo-gpio");
--- /dev/null
+/*
+ * linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver
+ *
+ * Copyright (C) 2007 Openmoko, Inc, Andy Green <andy@openmoko.com>
+ * Based on S3C MMC driver that was:
+ * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/crc7.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/glamo.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+#define DRIVER_NAME "glamo-mci"
+
+struct glamo_mci_host {
+ struct glamo_mmc_platform_data *pdata;
+ struct platform_device *pdev;
+ struct glamo_core *core;
+ struct mmc_host *mmc;
+ struct resource *mmio_mem;
+ struct resource *data_mem;
+ void __iomem *mmio_base;
+ u16 __iomem *data_base;
+
+ unsigned int irq;
+
+ struct regulator *regulator;
+ struct mmc_request *mrq;
+
+ unsigned int clk_rate;
+
+ unsigned short vdd;
+ char power_mode;
+
+ unsigned char request_counter;
+
+ struct timer_list disable_timer;
+
+ struct work_struct irq_work;
+ struct work_struct read_work;
+
+ unsigned clk_enabled : 1;
+
+};
+
+static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request* mrq);
+static void glamo_mci_send_command(struct glamo_mci_host *host,
+ struct mmc_command *cmd);
+
+/*
+ * Max SD clock rate
+ *
+ * held at /(3 + 1) due to concerns of 100R recommended series resistor
+ * allows 16MHz @ 4-bit --> 8MBytes/sec raw
+ *
+ * you can override this on kernel commandline using
+ *
+ * glamo_mci.sd_max_clk=10000000
+ *
+ * for example
+ */
+
+static int sd_max_clk = 21000000;
+module_param(sd_max_clk, int, 0644);
+
+/*
+ * Slow SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ * glamo_mci.sd_slow_ratio=8
+ *
+ * for example
+ *
+ * platform callback is used to decide effective clock rate, if not
+ * defined then max is used, if defined and returns nonzero, rate is
+ * divided by this factor
+ */
+
+static int sd_slow_ratio = 8;
+module_param(sd_slow_ratio, int, 0644);
+
+/*
+ * Post-power SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ * glamo_mci.sd_post_power_clock=1000000
+ *
+ * for example
+ *
+ * After changing power to card, clock is held at this rate until first bulk
+ * transfer completes
+ */
+
+static int sd_post_power_clock = 1000000;
+module_param(sd_post_power_clock, int, 0644);
+
+
+static inline void glamo_reg_write(struct glamo_mci_host *glamo,
+ u_int16_t reg, u_int16_t val)
+{
+ writew(val, glamo->mmio_base + reg);
+}
+
+static inline u_int16_t glamo_reg_read(struct glamo_mci_host *glamo,
+ u_int16_t reg)
+{
+ return readw(glamo->mmio_base + reg);
+}
+
+static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo,
+ u_int16_t reg, u_int16_t mask,
+ u_int16_t val)
+{
+ u_int16_t tmp;
+
+ val &= mask;
+
+ tmp = glamo_reg_read(glamo, reg);
+ tmp &= ~mask;
+ tmp |= val;
+ glamo_reg_write(glamo, reg, tmp);
+}
+
+static void glamo_mci_clock_disable(struct glamo_mci_host *host) {
+ if (host->clk_enabled) {
+ glamo_engine_suspend(host->core, GLAMO_ENGINE_MMC);
+ host->clk_enabled = 0;
+ }
+}
+
+static void glamo_mci_clock_enable(struct glamo_mci_host *host) {
+ del_timer_sync(&host->disable_timer);
+
+ if (!host->clk_enabled) {
+ glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+ host->clk_enabled = 1;
+ }
+}
+
+static void glamo_mci_disable_timer(unsigned long data) {
+ struct glamo_mci_host *host = (struct glamo_mci_host *)data;
+ glamo_mci_clock_disable(host);
+}
+
+
+static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
+{
+ struct scatterlist *sg;
+ u16 __iomem *from_ptr = host->data_base;
+ void *sg_pointer;
+
+ dev_dbg(&host->pdev->dev, "pio_read():\n");
+ for (sg = data->sg; sg; sg = sg_next(sg)) {
+ sg_pointer = page_address(sg_page(sg)) + sg->offset;
+
+
+ memcpy(sg_pointer, from_ptr, sg->length);
+ from_ptr += sg->length >> 1;
+
+ data->bytes_xfered += sg->length;
+ }
+
+ dev_dbg(&host->pdev->dev, "pio_read(): "
+ "complete (no more data).\n");
+}
+
+static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data)
+{
+ struct scatterlist *sg;
+ u16 __iomem *to_ptr = host->data_base;
+ void *sg_pointer;
+
+ dev_dbg(&host->pdev->dev, "pio_write():\n");
+ for (sg = data->sg; sg; sg = sg_next(sg)) {
+ sg_pointer = page_address(sg_page(sg)) + sg->offset;
+
+ data->bytes_xfered += sg->length;
+
+ memcpy(to_ptr, sg_pointer, sg->length);
+ to_ptr += sg->length >> 1;
+ }
+
+ dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
+}
+
+static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq)
+{
+ int real_rate = 0;
+
+ if (freq) {
+ glamo_mci_clock_enable(host);
+ real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC, freq);
+ } else {
+ glamo_mci_clock_disable(host);
+ }
+
+ return real_rate;
+}
+
+static void glamo_mci_request_done(struct glamo_mci_host *host, struct
+mmc_request *mrq) {
+ mod_timer(&host->disable_timer, jiffies + HZ / 16);
+ mmc_request_done(host->mmc, mrq);
+}
+
+
+static void glamo_mci_irq_worker(struct work_struct *work)
+{
+ struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+ irq_work);
+ struct mmc_command *cmd;
+ uint16_t status;
+ if (!host->mrq || !host->mrq->cmd)
+ return;
+
+ cmd = host->mrq->cmd;
+
+#if 0
+ if (cmd->data->flags & MMC_DATA_READ) {
+ return;
+ }
+#endif
+
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
+
+ /* we ignore a data timeout report if we are also told the data came */
+ if (status & GLAMO_STAT1_MMC_RB_DRDY)
+ status &= ~GLAMO_STAT1_MMC_DTOUT;
+
+ if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
+ cmd->error = -ETIMEDOUT;
+ if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
+ cmd->error = -EILSEQ;
+ }
+ if (cmd->error) {
+ dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+ goto done;
+ }
+
+ /* issue STOP if we have been given one to use */
+ if (host->mrq->stop) {
+ glamo_mci_send_command(host, host->mrq->stop);
+ }
+
+ if (cmd->data->flags & MMC_DATA_READ)
+ do_pio_read(host, cmd->data);
+
+done:
+ host->mrq = NULL;
+ glamo_mci_request_done(host, cmd->mrq);
+}
+
+static void glamo_mci_read_worker(struct work_struct *work)
+{
+ struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+ read_work);
+ struct mmc_command *cmd;
+ uint16_t status;
+ uint16_t blocks_ready;
+ size_t data_read = 0;
+ size_t data_ready;
+ struct scatterlist *sg;
+ u16 __iomem *from_ptr = host->data_base;
+ void *sg_pointer;
+
+
+ cmd = host->mrq->cmd;
+ sg = cmd->data->sg;
+ do {
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+
+ if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
+ cmd->error = -ETIMEDOUT;
+ if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
+ cmd->error = -EILSEQ;
+ if (cmd->error) {
+ dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+ goto done;
+ }
+
+ blocks_ready = glamo_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT);
+ data_ready = blocks_ready * cmd->data->blksz;
+
+ if (data_ready == data_read)
+ yield();
+
+ while(sg && data_read + sg->length <= data_ready) {
+ sg_pointer = page_address(sg_page(sg)) + sg->offset;
+ memcpy(sg_pointer, from_ptr, sg->length);
+ from_ptr += sg->length >> 1;
+
+ data_read += sg->length;
+ sg = sg_next(sg);
+ }
+
+ } while(sg);
+ cmd->data->bytes_xfered = data_read;
+
+ do {
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ } while (!(status & GLAMO_STAT1_MMC_IDLE));
+
+ if (host->mrq->stop)
+ glamo_mci_send_command(host, host->mrq->stop);
+
+ do {
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ } while (!(status & GLAMO_STAT1_MMC_IDLE));
+done:
+ host->mrq = NULL;
+ glamo_mci_request_done(host, cmd->mrq);
+}
+
+static irqreturn_t glamo_mci_irq(int irq, void *devid)
+{
+ struct glamo_mci_host *host = (struct glamo_mci_host*)devid;
+ schedule_work(&host->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void glamo_mci_send_command(struct glamo_mci_host *host,
+ struct mmc_command *cmd)
+{
+ u8 u8a[6];
+ u16 fire = 0;
+ unsigned int timeout = 1000000;
+ u16 * reg_resp = (u16 *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1);
+ u16 status;
+ int triggers_int = 1;
+
+ /* if we can't do it, reject as busy */
+ if (!glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) &
+ GLAMO_STAT1_MMC_IDLE) {
+ cmd->error = -EBUSY;
+ return;
+ }
+
+ /* create an array in wire order for CRC computation */
+ u8a[0] = 0x40 | (cmd->opcode & 0x3f);
+ u8a[1] = (u8)(cmd->arg >> 24);
+ u8a[2] = (u8)(cmd->arg >> 16);
+ u8a[3] = (u8)(cmd->arg >> 8);
+ u8a[4] = (u8)cmd->arg;
+ u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01; /* crc7 on first 5 bytes of packet */
+
+ /* issue the wire-order array including CRC in register order */
+ glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5]));
+ glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3]));
+ glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1]));
+
+ /* command index toggle */
+ fire |= (host->request_counter & 1) << 12;
+
+ /* set type of command */
+ switch (mmc_cmd_type(cmd)) {
+ case MMC_CMD_BC:
+ fire |= GLAMO_FIRE_MMC_CMDT_BNR;
+ break;
+ case MMC_CMD_BCR:
+ fire |= GLAMO_FIRE_MMC_CMDT_BR;
+ break;
+ case MMC_CMD_AC:
+ fire |= GLAMO_FIRE_MMC_CMDT_AND;
+ break;
+ case MMC_CMD_ADTC:
+ fire |= GLAMO_FIRE_MMC_CMDT_AD;
+ break;
+ }
+ /*
+ * if it expects a response, set the type expected
+ *
+ * R1, Length : 48bit, Normal response
+ * R1b, Length : 48bit, same R1, but added card busy status
+ * R2, Length : 136bit (really 128 bits with CRC snipped)
+ * R3, Length : 48bit (OCR register value)
+ * R4, Length : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card
+ * R5, Length : 48bit, IO_RW_DIRECTION, Reverse SDIO Card
+ * R6, Length : 48bit (RCA register)
+ * R7, Length : 48bit (interface condition, VHS(voltage supplied),
+ * check pattern, CRC7)
+ */
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_R1: /* same index as R6 and R7 */
+ fire |= GLAMO_FIRE_MMC_RSPT_R1;
+ break;
+ case MMC_RSP_R1B:
+ fire |= GLAMO_FIRE_MMC_RSPT_R1b;
+ break;
+ case MMC_RSP_R2:
+ fire |= GLAMO_FIRE_MMC_RSPT_R2;
+ break;
+ case MMC_RSP_R3:
+ fire |= GLAMO_FIRE_MMC_RSPT_R3;
+ break;
+ /* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */
+ }
+ /*
+ * From the command index, set up the command class in the host ctrllr
+ *
+ * missing guys present on chip but couldn't figure out how to use yet:
+ * 0x0 "stream read"
+ * 0x9 "cancel running command"
+ */
+ switch (cmd->opcode) {
+ case MMC_READ_SINGLE_BLOCK:
+ fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */
+ break;
+ case MMC_SWITCH: /* 64 byte payload */
+ case SD_APP_SEND_SCR:
+ case MMC_READ_MULTIPLE_BLOCK:
+ /* we will get an interrupt off this */
+ if (!cmd->mrq->stop)
+ /* multiblock no stop */
+ fire |= GLAMO_FIRE_MMC_CC_MBRNS;
+ else
+ /* multiblock with stop */
+ fire |= GLAMO_FIRE_MMC_CC_MBRS;
+ break;
+ case MMC_WRITE_BLOCK:
+ fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */
+ break;
+ case MMC_WRITE_MULTIPLE_BLOCK:
+ if (cmd->mrq->stop)
+ /* multiblock with stop */
+ fire |= GLAMO_FIRE_MMC_CC_MBWS;
+ else
+ /* multiblock NO stop-- 'RESERVED'? */
+ fire |= GLAMO_FIRE_MMC_CC_MBWNS;
+ break;
+ case MMC_STOP_TRANSMISSION:
+ fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
+ triggers_int = 0;
+ break;
+ default:
+ fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
+ triggers_int = 0;
+ break;
+ }
+
+ if (cmd->data)
+ host->mrq = cmd->mrq;
+
+ /* always largest timeout */
+ glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff);
+
+ /* Generate interrupt on txfer */
+ glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36,
+ 0x0800 |
+ GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
+ GLAMO_BASIC_MMC_EN_COMPL_INT |
+ GLAMO_BASIC_MMC_EN_DATA_PUPS |
+ GLAMO_BASIC_MMC_EN_CMD_PUP);
+
+ /* send the command out on the wire */
+ /* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
+ glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire);
+
+ /* we are deselecting card? because it isn't going to ack then... */
+ if ((cmd->opcode == 7) && (cmd->arg == 0))
+ return;
+
+ /*
+ * we must spin until response is ready or timed out
+ * -- we don't get interrupts unless there is a bulk rx
+ */
+ do
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ while (((((status >> 15) & 1) != (host->request_counter & 1)) ||
+ (!(status & (GLAMO_STAT1_MMC_RB_RRDY |
+ GLAMO_STAT1_MMC_RTOUT |
+ GLAMO_STAT1_MMC_DTOUT |
+ GLAMO_STAT1_MMC_BWERR |
+ GLAMO_STAT1_MMC_BRERR)))) && (timeout--));
+
+ if ((status & (GLAMO_STAT1_MMC_RTOUT |
+ GLAMO_STAT1_MMC_DTOUT)) ||
+ (timeout == 0)) {
+ cmd->error = -ETIMEDOUT;
+ } else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
+ cmd->error = -EILSEQ;
+ }
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[3] = readw(®_resp[0]) |
+ (readw(®_resp[1]) << 16);
+ cmd->resp[2] = readw(®_resp[2]) |
+ (readw(®_resp[3]) << 16);
+ cmd->resp[1] = readw(®_resp[4]) |
+ (readw(®_resp[5]) << 16);
+ cmd->resp[0] = readw(®_resp[6]) |
+ (readw(®_resp[7]) << 16);
+ } else {
+ cmd->resp[0] = (readw(®_resp[0]) >> 8) |
+ (readw(®_resp[1]) << 8) |
+ ((readw(®_resp[2])) << 24);
+ }
+ }
+
+#if 0
+ /* We'll only get an interrupt when all data has been transfered.
+ By starting to copy data when it's avaiable we can increase throughput by
+ up to 30%. */
+ if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+ schedule_work(&host->read_work);
+#endif
+
+}
+
+static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
+ struct mmc_data *data)
+{
+ /* set up the block info */
+ glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz);
+ glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks);
+
+ data->bytes_xfered = 0;
+
+ /* if write, prep the write into the shared RAM before the command */
+ if (data->flags & MMC_DATA_WRITE) {
+ do_pio_write(host, data);
+ }
+
+ dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
+ data->blksz, data->blocks);
+ return 0;
+}
+
+static int glamo_mci_irq_poll(struct glamo_mci_host *host,
+ struct mmc_command *cmd)
+{
+ int timeout = 1000000;
+ /*
+ * if the glamo INT# line isn't wired (*cough* it can happen)
+ * I'm afraid we have to spin on the IRQ status bit and "be
+ * our own INT# line"
+ */
+ /*
+ * we have faith we will get an "interrupt"...
+ * but something insane like suspend problems can mean
+ * we spin here forever, so we timeout after a LONG time
+ */
+ while ((!(readw(host->core->base +
+ GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) &&
+ (timeout--));
+
+ if (timeout < 0) {
+ if (cmd->data->error)
+ cmd->data->error = -ETIMEDOUT;
+ dev_err(&host->pdev->dev, "Payload timeout\n");
+ return -ETIMEDOUT;
+ }
+ /* ack this interrupt source */
+ writew(GLAMO_IRQ_MMC, host->core->base +
+ GLAMO_REG_IRQ_CLEAR);
+
+ /* yay we are an interrupt controller! -- call the ISR
+ * it will stop clock to card
+ */
+ glamo_mci_irq(host->irq, host);
+
+ return 0;
+}
+
+static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd = mrq->cmd;
+
+ glamo_mci_clock_enable(host);
+ host->request_counter++;
+ if (cmd->data) {
+ if(glamo_mci_prepare_pio(host, cmd->data)) {
+ cmd->error = -EIO;
+ cmd->data->error = -EIO;
+ goto done;
+ }
+ }
+
+ dev_dbg(&host->pdev->dev,"cmd 0x%x, "
+ "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n",
+ cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
+ cmd->flags);
+
+ glamo_mci_send_command(host, cmd);
+
+ /*
+ * if we don't have bulk data to take care of, we're done
+ */
+ if (!cmd->data || cmd->error)
+ goto done;
+
+
+ if (!host->core->irq_works) {
+ if (glamo_mci_irq_poll(host, mrq->cmd))
+ goto done;
+ }
+
+ /*
+ * Otherwise can can use the interrupt as async completion --
+ * if there is read data coming, or we wait for write data to complete,
+ * exit without mmc_request_done() as the payload interrupt
+ * will service it
+ */
+ dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
+ return;
+done:
+ glamo_mci_request_done(host, mrq);
+}
+
+static void glamo_mci_set_power_mode(struct glamo_mci_host *host,
+ unsigned char power_mode) {
+ int ret;
+
+ if (power_mode == host->power_mode)
+ return;
+
+ switch(power_mode) {
+ case MMC_POWER_UP:
+ if (host->power_mode == MMC_POWER_OFF) {
+ ret = regulator_enable(host->regulator);
+ if (ret)
+ dev_err(&host->pdev->dev, "Failed to enable regulator: %d\n", ret);
+ }
+ break;
+ case MMC_POWER_ON:
+ break;
+ case MMC_POWER_OFF:
+ default:
+ glamo_engine_disable(host->core,
+ GLAMO_ENGINE_MMC);
+
+ ret = regulator_disable(host->regulator);
+ if (ret)
+ dev_warn(&host->pdev->dev, "Failed to disable regulator: %d\n", ret);
+ break;
+ }
+ host->power_mode = power_mode;
+}
+
+static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ int bus_width = 0;
+ int rate;
+ int sd_drive;
+ int ret;
+
+ /* Set power */
+ glamo_mci_set_power_mode(host, ios->power_mode);
+
+ if (host->vdd != ios->vdd) {
+ ret = mmc_regulator_set_ocr(host->regulator, ios->vdd);
+ if (ret)
+ dev_err(&host->pdev->dev, "Failed to set regulator voltage: %d\n", ret);
+ else
+ host->vdd = ios->vdd;
+ }
+ rate = glamo_mci_set_card_clock(host, ios->clock);
+
+ if ((ios->power_mode == MMC_POWER_ON) ||
+ (ios->power_mode == MMC_POWER_UP)) {
+ dev_info(&host->pdev->dev,
+ "powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). "
+ "Bus width=%d\n", ios->vdd,
+ rate / 1000, 0,
+ ios->clock / 1000, (int)ios->bus_width);
+ } else {
+ dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
+ }
+
+ /* set bus width */
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA;
+
+ sd_drive = (rate * 4) / host->clk_rate;
+ if (sd_drive > 3)
+ sd_drive = 3;
+
+ glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC,
+ GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0,
+ bus_width | sd_drive << 6);
+}
+
+
+/*
+ * no physical write protect supported by us
+ */
+static int glamo_mci_get_ro(struct mmc_host *mmc)
+{
+ return 0;
+}
+
+static struct mmc_host_ops glamo_mci_ops = {
+ .request = glamo_mci_send_request,
+ .set_ios = glamo_mci_set_ios,
+ .get_ro = glamo_mci_get_ro,
+};
+
+static int glamo_mci_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct glamo_mci_host *host;
+ struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
+ int ret;
+
+ dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n");
+
+ mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto probe_out;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->pdev = pdev;
+ if (core->pdata)
+ host->pdata = core->pdata->mmc_data;
+ host->power_mode = MMC_POWER_OFF;
+ host->clk_enabled = 0;
+ host->core = core;
+ host->irq = platform_get_irq(pdev, 0);
+
+ INIT_WORK(&host->irq_work, glamo_mci_irq_worker);
+ INIT_WORK(&host->read_work, glamo_mci_read_worker);
+
+ host->regulator = regulator_get(pdev->dev.parent, "SD_3V3");
+ if (!host->regulator) {
+ dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
+ ret = -ENODEV;
+ goto probe_free_host;
+ }
+
+ host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!host->mmio_mem) {
+ dev_err(&pdev->dev,
+ "failed to get io memory region resouce.\n");
+ ret = -ENOENT;
+ goto probe_regulator_put;
+ }
+
+ host->mmio_mem = request_mem_region(host->mmio_mem->start,
+ resource_size(host->mmio_mem),
+ pdev->name);
+
+ if (!host->mmio_mem) {
+ dev_err(&pdev->dev, "failed to request io memory region.\n");
+ ret = -ENOENT;
+ goto probe_regulator_put;
+ }
+
+ host->mmio_base = ioremap(host->mmio_mem->start,
+ resource_size(host->mmio_mem));
+ if (!host->mmio_base) {
+ dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+ ret = -EINVAL;
+ goto probe_free_mem_region_mmio;
+ }
+
+
+ /* Get ahold of our data buffer we use for data in and out on MMC */
+ host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!host->data_mem) {
+ dev_err(&pdev->dev,
+ "failed to get io memory region resource.\n");
+ ret = -ENOENT;
+ goto probe_iounmap_mmio;
+ }
+
+ host->data_mem = request_mem_region(host->data_mem->start,
+ resource_size(host->data_mem),
+ pdev->name);
+
+ if (!host->data_mem) {
+ dev_err(&pdev->dev, "failed to request io memory region.\n");
+ ret = -ENOENT;
+ goto probe_iounmap_mmio;
+ }
+ host->data_base = ioremap(host->data_mem->start,
+ resource_size(host->data_mem));
+
+ if (host->data_base == 0) {
+ dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+ ret = -EINVAL;
+ goto probe_free_mem_region_data;
+ }
+
+ ret = request_irq(host->irq, glamo_mci_irq, IRQF_SHARED,
+ pdev->name, host);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register irq.\n");
+ goto probe_iounmap_data;
+ }
+
+
+ host->vdd = 0;
+ host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1);
+
+ /* explain our host controller capabilities */
+ mmc->ops = &glamo_mci_ops;
+ mmc->ocr_avail = mmc_regulator_get_ocrmask(host->regulator);
+ mmc->caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED;
+ mmc->f_min = host->clk_rate / 256;
+ mmc->f_max = sd_max_clk;
+
+ mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
+ mmc->max_blk_size = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
+ mmc->max_req_size = resource_size(host->data_mem);
+ mmc->max_seg_size = mmc->max_req_size;
+ mmc->max_phys_segs = 128;
+ mmc->max_hw_segs = 128;
+
+ if (mmc->ocr_avail < 0) {
+ dev_warn(&pdev->dev, "Failed to get ocr list for regulator: %d.\n",
+ mmc->ocr_avail);
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ }
+
+ platform_set_drvdata(pdev, mmc);
+
+ glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+ glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);
+
+ glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
+ (u16)(host->data_mem->start));
+ glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
+ (u16)(host->data_mem->start >> 16));
+
+ glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
+ (u16)(host->data_mem->start));
+ glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
+ (u16)(host->data_mem->start >> 16));
+
+ setup_timer(&host->disable_timer, glamo_mci_disable_timer,
+ (unsigned long)host);
+
+ if ((ret = mmc_add_host(mmc))) {
+ dev_err(&pdev->dev, "failed to add mmc host.\n");
+ goto probe_freeirq;
+ }
+
+ dev_info(&pdev->dev,"initialisation done.\n");
+ return 0;
+
+probe_freeirq:
+ free_irq(host->irq, host);
+probe_iounmap_data:
+ iounmap(host->data_base);
+probe_free_mem_region_data:
+ release_mem_region(host->data_mem->start, resource_size(host->data_mem));
+probe_iounmap_mmio:
+ iounmap(host->mmio_base);
+probe_free_mem_region_mmio:
+ release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem));
+probe_regulator_put:
+ regulator_put(host->regulator);
+probe_free_host:
+ mmc_free_host(mmc);
+probe_out:
+ return ret;
+}
+
+static int glamo_mci_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct glamo_mci_host *host = mmc_priv(mmc);
+
+ free_irq(host->irq, host);
+
+ mmc_remove_host(mmc);
+ iounmap(host->mmio_base);
+ iounmap(host->data_base);
+ release_mem_region(host->mmio_mem->start, resource_size(host->mmio_mem));
+ release_mem_region(host->data_mem->start, resource_size(host->data_mem));
+
+ regulator_put(host->regulator);
+
+ mmc_free_host(mmc);
+
+ glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int glamo_mci_suspend(struct device *dev)
+{
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ int ret;
+
+ cancel_work_sync(&host->irq_work);
+
+ ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
+
+ glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
+
+ return ret;
+}
+
+static int glamo_mci_resume(struct device *dev)
+{
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ int ret;
+
+ glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+ glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);
+
+ glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
+ (u16)(host->data_mem->start));
+ glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
+ (u16)(host->data_mem->start >> 16));
+
+ glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
+ (u16)(host->data_mem->start));
+ glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
+ (u16)(host->data_mem->start >> 16));
+ mdelay(5);
+
+ ret = mmc_resume_host(host->mmc);
+/* glamo_mci_clock_disable(host);*/
+
+ return 0;
+}
+
+static struct dev_pm_ops glamo_mci_pm_ops = {
+ .suspend = glamo_mci_suspend,
+ .resume = glamo_mci_resume,
+};
+#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops)
+
+#else /* CONFIG_PM */
+#define GLAMO_MCI_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+
+static struct platform_driver glamo_mci_driver =
+{
+ .probe = glamo_mci_probe,
+ .remove = glamo_mci_remove,
+ .driver = {
+ .name = "glamo-mci",
+ .owner = THIS_MODULE,
+ .pm = GLAMO_MCI_PM_OPS,
+ },
+};
+
+static int __init glamo_mci_init(void)
+{
+ platform_driver_register(&glamo_mci_driver);
+ return 0;
+}
+
+static void __exit glamo_mci_exit(void)
+{
+ platform_driver_unregister(&glamo_mci_driver);
+}
+
+module_init(glamo_mci_init);
+module_exit(glamo_mci_exit);
+
+MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
--- /dev/null
+#include <linux/module.h>
+#include <linux/vermagic.h>
+#include <linux/compiler.h>
+
+MODULE_INFO(vermagic, VERMAGIC_STRING);
+
+struct module __this_module
+__attribute__((section(".gnu.linkonce.this_module"))) = {
+ .name = KBUILD_MODNAME,
+ .init = init_module,
+#ifdef CONFIG_MODULE_UNLOAD
+ .exit = cleanup_module,
+#endif
+ .arch = MODULE_ARCH_INIT,
+};
+
+static const char __module_depends[]
+__used
+__attribute__((section(".modinfo"))) =
+"depends=";
+
--- /dev/null
+
+
+
+
+static int __init glamo_mmc_probe(struct platform_device *pdev) {
+
+ struct mmc_host *mmc;
+ struct glamo_host *host;
+ struct resource *res;
+ int irq;
+
+ res = platform_get_resource(pdev, IO_RESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+
+
+ res = request_mem_region(res->start, res->end - res->start + 1, pdev->name);
+
+ mmc = mmc_alloc_host(sizeof(struct glamo_host), &pdev->dev);
+
+ mmc->ops = &glamo_mmc_ops;
+
+ mmc->f_min = 0;
+ mmc->f_max = 100;
+ mmc->ocr_avail;
+
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+
+ mmc->max_hw_segs;
+ mmc->max_phys_segs;
+ mmc->max_req_size;
+ mmc->max_blk_size;
+ mmc->max_blk_count;
+
+
+ mmc_add_host(mmc);
+
+ return 0;
+}
--- /dev/null
+#ifndef _GLAMO_REGS_H
+#define _GLAMO_REGS_H
+
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+enum glamo_regster_offsets {
+ GLAMO_REGOFS_GENERIC = 0x0000,
+ GLAMO_REGOFS_HOSTBUS = 0x0200,
+ GLAMO_REGOFS_MEMORY = 0x0300,
+ GLAMO_REGOFS_VIDCAP = 0x0400,
+ GLAMO_REGOFS_ISP = 0x0500,
+ GLAMO_REGOFS_JPEG = 0x0800,
+ GLAMO_REGOFS_MPEG = 0x0c00,
+ GLAMO_REGOFS_LCD = 0x1100,
+ GLAMO_REGOFS_MMC = 0x1400,
+ GLAMO_REGOFS_MPROC0 = 0x1500,
+ GLAMO_REGOFS_MPROC1 = 0x1580,
+ GLAMO_REGOFS_CMDQUEUE = 0x1600,
+ GLAMO_REGOFS_RISC = 0x1680,
+ GLAMO_REGOFS_2D = 0x1700,
+ GLAMO_REGOFS_3D = 0x1b00,
+ GLAMO_REGOFS_END = 0x2400,
+};
+
+
+enum glamo_register_generic {
+ GLAMO_REG_GCONF1 = 0x0000,
+ GLAMO_REG_GCONF2 = 0x0002,
+#define GLAMO_REG_DEVICE_ID GLAMO_REG_GCONF2
+ GLAMO_REG_GCONF3 = 0x0004,
+#define GLAMO_REG_REVISION_ID GLAMO_REG_GCONF3
+ GLAMO_REG_IRQ_GEN1 = 0x0006,
+#define GLAMO_REG_IRQ_ENABLE GLAMO_REG_IRQ_GEN1
+ GLAMO_REG_IRQ_GEN2 = 0x0008,
+#define GLAMO_REG_IRQ_SET GLAMO_REG_IRQ_GEN2
+ GLAMO_REG_IRQ_GEN3 = 0x000a,
+#define GLAMO_REG_IRQ_CLEAR GLAMO_REG_IRQ_GEN3
+ GLAMO_REG_IRQ_GEN4 = 0x000c,
+#define GLAMO_REG_IRQ_STATUS GLAMO_REG_IRQ_GEN4
+ GLAMO_REG_CLOCK_HOST = 0x0010,
+ GLAMO_REG_CLOCK_MEMORY = 0x0012,
+ GLAMO_REG_CLOCK_LCD = 0x0014,
+ GLAMO_REG_CLOCK_MMC = 0x0016,
+ GLAMO_REG_CLOCK_ISP = 0x0018,
+ GLAMO_REG_CLOCK_JPEG = 0x001a,
+ GLAMO_REG_CLOCK_3D = 0x001c,
+ GLAMO_REG_CLOCK_2D = 0x001e,
+ GLAMO_REG_CLOCK_RISC1 = 0x0020, /* 3365 only? */
+ GLAMO_REG_CLOCK_RISC2 = 0x0022, /* 3365 only? */
+ GLAMO_REG_CLOCK_MPEG = 0x0024,
+ GLAMO_REG_CLOCK_MPROC = 0x0026,
+
+ GLAMO_REG_CLOCK_GEN5_1 = 0x0030,
+ GLAMO_REG_CLOCK_GEN5_2 = 0x0032,
+ GLAMO_REG_CLOCK_GEN6 = 0x0034,
+ GLAMO_REG_CLOCK_GEN7 = 0x0036,
+ GLAMO_REG_CLOCK_GEN8 = 0x0038,
+ GLAMO_REG_CLOCK_GEN9 = 0x003a,
+ GLAMO_REG_CLOCK_GEN10 = 0x003c,
+ GLAMO_REG_CLOCK_GEN11 = 0x003e,
+ GLAMO_REG_PLL_GEN1 = 0x0040,
+ GLAMO_REG_PLL_GEN2 = 0x0042,
+ GLAMO_REG_PLL_GEN3 = 0x0044,
+ GLAMO_REG_PLL_GEN4 = 0x0046,
+ GLAMO_REG_PLL_GEN5 = 0x0048,
+ GLAMO_REG_GPIO_GEN1 = 0x0050,
+ GLAMO_REG_GPIO_GEN2 = 0x0052,
+ GLAMO_REG_GPIO_GEN3 = 0x0054,
+ GLAMO_REG_GPIO_GEN4 = 0x0056,
+ GLAMO_REG_GPIO_GEN5 = 0x0058,
+ GLAMO_REG_GPIO_GEN6 = 0x005a,
+ GLAMO_REG_GPIO_GEN7 = 0x005c,
+ GLAMO_REG_GPIO_GEN8 = 0x005e,
+ GLAMO_REG_GPIO_GEN9 = 0x0060,
+ GLAMO_REG_GPIO_GEN10 = 0x0062,
+ GLAMO_REG_DFT_GEN1 = 0x0070,
+ GLAMO_REG_DFT_GEN2 = 0x0072,
+ GLAMO_REG_DFT_GEN3 = 0x0074,
+ GLAMO_REG_DFT_GEN4 = 0x0076,
+
+ GLAMO_REG_DFT_GEN5 = 0x01e0,
+ GLAMO_REG_DFT_GEN6 = 0x01f0,
+};
+
+#define GLAMO_REG_HOSTBUS(x) (GLAMO_REGOFS_HOSTBUS-2+(x*2))
+
+#define REG_MEM(x) (GLAMO_REGOFS_MEMORY+(x))
+#define GLAMO_REG_MEM_TIMING(x) (GLAMO_REG_MEM_TIMING1-2+(x*2))
+
+enum glamo_register_mem {
+ GLAMO_REG_MEM_TYPE = REG_MEM(0x00),
+ GLAMO_REG_MEM_GEN = REG_MEM(0x02),
+ GLAMO_REG_MEM_TIMING1 = REG_MEM(0x04),
+ GLAMO_REG_MEM_TIMING2 = REG_MEM(0x06),
+ GLAMO_REG_MEM_TIMING3 = REG_MEM(0x08),
+ GLAMO_REG_MEM_TIMING4 = REG_MEM(0x0a),
+ GLAMO_REG_MEM_TIMING5 = REG_MEM(0x0c),
+ GLAMO_REG_MEM_TIMING6 = REG_MEM(0x0e),
+ GLAMO_REG_MEM_TIMING7 = REG_MEM(0x10),
+ GLAMO_REG_MEM_TIMING8 = REG_MEM(0x12),
+ GLAMO_REG_MEM_TIMING9 = REG_MEM(0x14),
+ GLAMO_REG_MEM_TIMING10 = REG_MEM(0x16),
+ GLAMO_REG_MEM_TIMING11 = REG_MEM(0x18),
+ GLAMO_REG_MEM_POWER1 = REG_MEM(0x1a),
+ GLAMO_REG_MEM_POWER2 = REG_MEM(0x1c),
+ GLAMO_REG_MEM_LCD_BUF1 = REG_MEM(0x1e),
+ GLAMO_REG_MEM_LCD_BUF2 = REG_MEM(0x20),
+ GLAMO_REG_MEM_LCD_BUF3 = REG_MEM(0x22),
+ GLAMO_REG_MEM_LCD_BUF4 = REG_MEM(0x24),
+ GLAMO_REG_MEM_BIST1 = REG_MEM(0x26),
+ GLAMO_REG_MEM_BIST2 = REG_MEM(0x28),
+ GLAMO_REG_MEM_BIST3 = REG_MEM(0x2a),
+ GLAMO_REG_MEM_BIST4 = REG_MEM(0x2c),
+ GLAMO_REG_MEM_BIST5 = REG_MEM(0x2e),
+ GLAMO_REG_MEM_MAH1 = REG_MEM(0x30),
+ GLAMO_REG_MEM_MAH2 = REG_MEM(0x32),
+ GLAMO_REG_MEM_DRAM1 = REG_MEM(0x34),
+ GLAMO_REG_MEM_DRAM2 = REG_MEM(0x36),
+ GLAMO_REG_MEM_CRC = REG_MEM(0x38),
+};
+
+#define GLAMO_MEM_TYPE_MASK 0x03
+
+enum glamo_reg_mem_dram1 {
+ /* b0 - b10 == refresh period, 1 -> 2048 clocks */
+ GLAMO_MEM_DRAM1_EN_GATE_CLK = (1 << 11),
+ GLAMO_MEM_DRAM1_SELF_REFRESH = (1 << 12),
+ GLAMO_MEM_DRAM1_EN_GATE_CKE = (1 << 13),
+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH = (1 << 14),
+ GLAMO_MEM_DRAM1_EN_MODEREG_SET = (1 << 15),
+};
+
+enum glamo_reg_mem_dram2 {
+ GLAMO_MEM_DRAM2_DEEP_PWRDOWN = (1 << 12),
+};
+
+enum glamo_irq_index {
+ GLAMO_IRQIDX_HOSTBUS = 0,
+ GLAMO_IRQIDX_JPEG = 1,
+ GLAMO_IRQIDX_MPEG = 2,
+ GLAMO_IRQIDX_MPROC1 = 3,
+ GLAMO_IRQIDX_MPROC0 = 4,
+ GLAMO_IRQIDX_CMDQUEUE = 5,
+ GLAMO_IRQIDX_2D = 6,
+ GLAMO_IRQIDX_MMC = 7,
+ GLAMO_IRQIDX_RISC = 8,
+};
+
+enum glamo_irq {
+ GLAMO_IRQ_HOSTBUS = (1 << GLAMO_IRQIDX_HOSTBUS),
+ GLAMO_IRQ_JPEG = (1 << GLAMO_IRQIDX_JPEG),
+ GLAMO_IRQ_MPEG = (1 << GLAMO_IRQIDX_MPEG),
+ GLAMO_IRQ_MPROC1 = (1 << GLAMO_IRQIDX_MPROC1),
+ GLAMO_IRQ_MPROC0 = (1 << GLAMO_IRQIDX_MPROC0),
+ GLAMO_IRQ_CMDQUEUE = (1 << GLAMO_IRQIDX_CMDQUEUE),
+ GLAMO_IRQ_2D = (1 << GLAMO_IRQIDX_2D),
+ GLAMO_IRQ_MMC = (1 << GLAMO_IRQIDX_MMC),
+ GLAMO_IRQ_RISC = (1 << GLAMO_IRQIDX_RISC),
+};
+
+enum glamo_reg_clock_host {
+ GLAMO_CLOCK_HOST_DG_BCLK = 0x0001,
+ GLAMO_CLOCK_HOST_DG_M0CLK = 0x0004,
+ GLAMO_CLOCK_HOST_RESET = 0x1000,
+};
+
+enum glamo_reg_clock_mem {
+ GLAMO_CLOCK_MEM_DG_M1CLK = 0x0001,
+ GLAMO_CLOCK_MEM_EN_M1CLK = 0x0002,
+ GLAMO_CLOCK_MEM_DG_MOCACLK = 0x0004,
+ GLAMO_CLOCK_MEM_EN_MOCACLK = 0x0008,
+ GLAMO_CLOCK_MEM_RESET = 0x1000,
+ GLAMO_CLOCK_MOCA_RESET = 0x2000,
+};
+
+enum glamo_reg_clock_lcd {
+ GLAMO_CLOCK_LCD_DG_DCLK = 0x0001,
+ GLAMO_CLOCK_LCD_EN_DCLK = 0x0002,
+ GLAMO_CLOCK_LCD_DG_DMCLK = 0x0004,
+ GLAMO_CLOCK_LCD_EN_DMCLK = 0x0008,
+ //
+ GLAMO_CLOCK_LCD_EN_DHCLK = 0x0020,
+ GLAMO_CLOCK_LCD_DG_M5CLK = 0x0040,
+ GLAMO_CLOCK_LCD_EN_M5CLK = 0x0080,
+ GLAMO_CLOCK_LCD_RESET = 0x1000,
+};
+
+enum glamo_reg_clock_mmc {
+ GLAMO_CLOCK_MMC_DG_TCLK = 0x0001,
+ GLAMO_CLOCK_MMC_EN_TCLK = 0x0002,
+ GLAMO_CLOCK_MMC_DG_M9CLK = 0x0004,
+ GLAMO_CLOCK_MMC_EN_M9CLK = 0x0008,
+ GLAMO_CLOCK_MMC_RESET = 0x1000,
+};
+
+enum glamo_reg_basic_mmc {
+ /* set to disable CRC error rejection */
+ GLAMO_BASIC_MMC_DISABLE_CRC = 0x0001,
+ /* enable completion interrupt */
+ GLAMO_BASIC_MMC_EN_COMPL_INT = 0x0002,
+ /* stop MMC clock while enforced idle waiting for data from card */
+ GLAMO_BASIC_MMC_NO_CLK_RD_WAIT = 0x0004,
+ /* 0 = 1-bit bus to card, 1 = use 4-bit bus (has to be negotiated) */
+ GLAMO_BASIC_MMC_EN_4BIT_DATA = 0x0008,
+ /* enable 75K pullups on D3..D0 */
+ GLAMO_BASIC_MMC_EN_DATA_PUPS = 0x0010,
+ /* enable 75K pullup on CMD */
+ GLAMO_BASIC_MMC_EN_CMD_PUP = 0x0020,
+ /* IO drive strength 00=weak -> 11=strongest */
+ GLAMO_BASIC_MMC_EN_DR_STR0 = 0x0040,
+ GLAMO_BASIC_MMC_EN_DR_STR1 = 0x0080,
+ /* TCLK delay stage A, 0000 = 500ps --> 1111 = 8ns */
+ GLAMO_BASIC_MMC_EN_TCLK_DLYA0 = 0x0100,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYA1 = 0x0200,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYA2 = 0x0400,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYA3 = 0x0800,
+ /* TCLK delay stage B (cumulative), 0000 = 500ps --> 1111 = 8ns */
+ GLAMO_BASIC_MMC_EN_TCLK_DLYB0 = 0x1000,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYB1 = 0x2000,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYB2 = 0x4000,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYB3 = 0x8000,
+};
+
+enum glamo_reg_stat1_mmc {
+ /* command "counter" (really: toggle) */
+ GLAMO_STAT1_MMC_CMD_CTR = 0x8000,
+ /* engine is idle */
+ GLAMO_STAT1_MMC_IDLE = 0x4000,
+ /* readback response is ready */
+ GLAMO_STAT1_MMC_RB_RRDY = 0x0200,
+ /* readback data is ready */
+ GLAMO_STAT1_MMC_RB_DRDY = 0x0100,
+ /* no response timeout */
+ GLAMO_STAT1_MMC_RTOUT = 0x0020,
+ /* no data timeout */
+ GLAMO_STAT1_MMC_DTOUT = 0x0010,
+ /* CRC error on block write */
+ GLAMO_STAT1_MMC_BWERR = 0x0004,
+ /* CRC error on block read */
+ GLAMO_STAT1_MMC_BRERR = 0x0002
+};
+
+enum glamo_reg_fire_mmc {
+ /* command "counter" (really: toggle)
+ * the STAT1 register reflects this so you can ensure you don't look
+ * at status for previous command
+ */
+ GLAMO_FIRE_MMC_CMD_CTR = 0x8000,
+ /* sets kind of response expected */
+ GLAMO_FIRE_MMC_RES_MASK = 0x0700,
+ /* sets command type */
+ GLAMO_FIRE_MMC_TYP_MASK = 0x00C0,
+ /* sets command class */
+ GLAMO_FIRE_MMC_CLS_MASK = 0x000F,
+};
+
+enum glamo_fire_mmc_response_types {
+ GLAMO_FIRE_MMC_RSPT_R1 = 0x0000,
+ GLAMO_FIRE_MMC_RSPT_R1b = 0x0100,
+ GLAMO_FIRE_MMC_RSPT_R2 = 0x0200,
+ GLAMO_FIRE_MMC_RSPT_R3 = 0x0300,
+ GLAMO_FIRE_MMC_RSPT_R4 = 0x0400,
+ GLAMO_FIRE_MMC_RSPT_R5 = 0x0500,
+};
+
+enum glamo_fire_mmc_command_types {
+ /* broadcast, no response */
+ GLAMO_FIRE_MMC_CMDT_BNR = 0x0000,
+ /* broadcast, with response */
+ GLAMO_FIRE_MMC_CMDT_BR = 0x0040,
+ /* addressed, no data */
+ GLAMO_FIRE_MMC_CMDT_AND = 0x0080,
+ /* addressed, with data */
+ GLAMO_FIRE_MMC_CMDT_AD = 0x00C0,
+};
+
+enum glamo_fire_mmc_command_class {
+ /* "Stream Read" */
+ GLAMO_FIRE_MMC_CC_STRR = 0x0000,
+ /* Single Block Read */
+ GLAMO_FIRE_MMC_CC_SBR = 0x0001,
+ /* Multiple Block Read With Stop */
+ GLAMO_FIRE_MMC_CC_MBRS = 0x0002,
+ /* Multiple Block Read No Stop */
+ GLAMO_FIRE_MMC_CC_MBRNS = 0x0003,
+ /* RESERVED for "Stream Write" */
+ GLAMO_FIRE_MMC_CC_STRW = 0x0004,
+ /* "Stream Write" */
+ GLAMO_FIRE_MMC_CC_SBW = 0x0005,
+ /* RESERVED for Multiple Block Write With Stop */
+ GLAMO_FIRE_MMC_CC_MBWS = 0x0006,
+ /* Multiple Block Write No Stop */
+ GLAMO_FIRE_MMC_CC_MBWNS = 0x0007,
+ /* STOP command */
+ GLAMO_FIRE_MMC_CC_STOP = 0x0008,
+ /* Cancel on Running Command */
+ GLAMO_FIRE_MMC_CC_CANCL = 0x0009,
+ /* "Basic Command" */
+ GLAMO_FIRE_MMC_CC_BASIC = 0x000a,
+};
+
+/* these are offsets from the start of the MMC register region */
+enum glamo_register_mmc {
+ /* MMC command, b15..8 = cmd arg b7..0; b7..1 = CRC; b0 = end bit */
+ GLAMO_REG_MMC_CMD_REG1 = 0x00,
+ /* MMC command, b15..0 = cmd arg b23 .. 8 */
+ GLAMO_REG_MMC_CMD_REG2 = 0x02,
+ /* MMC command, b15=start, b14=transmission,
+ * b13..8=cmd idx, b7..0=cmd arg b31..24
+ */
+ GLAMO_REG_MMC_CMD_REG3 = 0x04,
+ GLAMO_REG_MMC_CMD_FIRE = 0x06,
+ GLAMO_REG_MMC_CMD_RSP1 = 0x10,
+ GLAMO_REG_MMC_CMD_RSP2 = 0x12,
+ GLAMO_REG_MMC_CMD_RSP3 = 0x14,
+ GLAMO_REG_MMC_CMD_RSP4 = 0x16,
+ GLAMO_REG_MMC_CMD_RSP5 = 0x18,
+ GLAMO_REG_MMC_CMD_RSP6 = 0x1a,
+ GLAMO_REG_MMC_CMD_RSP7 = 0x1c,
+ GLAMO_REG_MMC_CMD_RSP8 = 0x1e,
+ GLAMO_REG_MMC_RB_STAT1 = 0x20,
+ GLAMO_REG_MMC_RB_BLKCNT = 0x22,
+ GLAMO_REG_MMC_RB_BLKLEN = 0x24,
+ GLAMO_REG_MMC_BASIC = 0x30,
+ GLAMO_REG_MMC_RDATADS1 = 0x34,
+ GLAMO_REG_MMC_RDATADS2 = 0x36,
+ GLAMO_REG_MMC_WDATADS1 = 0x38,
+ GLAMO_REG_MMC_WDATADS2 = 0x3a,
+ GLAMO_REG_MMC_DATBLKCNT = 0x3c,
+ GLAMO_REG_MMC_DATBLKLEN = 0x3e,
+ GLAMO_REG_MMC_TIMEOUT = 0x40,
+
+};
+
+enum glamo_reg_clock_isp {
+ GLAMO_CLOCK_ISP_DG_I1CLK = 0x0001,
+ GLAMO_CLOCK_ISP_EN_I1CLK = 0x0002,
+ GLAMO_CLOCK_ISP_DG_CCLK = 0x0004,
+ GLAMO_CLOCK_ISP_EN_CCLK = 0x0008,
+ //
+ GLAMO_CLOCK_ISP_EN_SCLK = 0x0020,
+ GLAMO_CLOCK_ISP_DG_M2CLK = 0x0040,
+ GLAMO_CLOCK_ISP_EN_M2CLK = 0x0080,
+ GLAMO_CLOCK_ISP_DG_M15CLK = 0x0100,
+ GLAMO_CLOCK_ISP_EN_M15CLK = 0x0200,
+ GLAMO_CLOCK_ISP1_RESET = 0x1000,
+ GLAMO_CLOCK_ISP2_RESET = 0x2000,
+};
+
+enum glamo_reg_clock_jpeg {
+ GLAMO_CLOCK_JPEG_DG_JCLK = 0x0001,
+ GLAMO_CLOCK_JPEG_EN_JCLK = 0x0002,
+ GLAMO_CLOCK_JPEG_DG_M3CLK = 0x0004,
+ GLAMO_CLOCK_JPEG_EN_M3CLK = 0x0008,
+ GLAMO_CLOCK_JPEG_RESET = 0x1000,
+};
+
+enum glamo_reg_clock_2d {
+ GLAMO_CLOCK_2D_DG_GCLK = 0x0001,
+ GLAMO_CLOCK_2D_EN_GCLK = 0x0002,
+ GLAMO_CLOCK_2D_DG_M7CLK = 0x0004,
+ GLAMO_CLOCK_2D_EN_M7CLK = 0x0008,
+ GLAMO_CLOCK_2D_DG_M6CLK = 0x0010,
+ GLAMO_CLOCK_2D_EN_M6CLK = 0x0020,
+ GLAMO_CLOCK_2D_RESET = 0x1000,
+ GLAMO_CLOCK_2D_CQ_RESET = 0x2000,
+};
+
+enum glamo_reg_clock_3d {
+ GLAMO_CLOCK_3D_DG_ECLK = 0x0001,
+ GLAMO_CLOCK_3D_EN_ECLK = 0x0002,
+ GLAMO_CLOCK_3D_DG_RCLK = 0x0004,
+ GLAMO_CLOCK_3D_EN_RCLK = 0x0008,
+ GLAMO_CLOCK_3D_DG_M8CLK = 0x0010,
+ GLAMO_CLOCK_3D_EN_M8CLK = 0x0020,
+ GLAMO_CLOCK_3D_BACK_RESET = 0x1000,
+ GLAMO_CLOCK_3D_FRONT_RESET = 0x2000,
+};
+
+enum glamo_reg_clock_mpeg {
+ GLAMO_CLOCK_MPEG_DG_X0CLK = 0x0001,
+ GLAMO_CLOCK_MPEG_EN_X0CLK = 0x0002,
+ GLAMO_CLOCK_MPEG_DG_X1CLK = 0x0004,
+ GLAMO_CLOCK_MPEG_EN_X1CLK = 0x0008,
+ GLAMO_CLOCK_MPEG_DG_X2CLK = 0x0010,
+ GLAMO_CLOCK_MPEG_EN_X2CLK = 0x0020,
+ GLAMO_CLOCK_MPEG_DG_X3CLK = 0x0040,
+ GLAMO_CLOCK_MPEG_EN_X3CLK = 0x0080,
+ GLAMO_CLOCK_MPEG_DG_X4CLK = 0x0100,
+ GLAMO_CLOCK_MPEG_EN_X4CLK = 0x0200,
+ GLAMO_CLOCK_MPEG_DG_X6CLK = 0x0400,
+ GLAMO_CLOCK_MPEG_EN_X6CLK = 0x0800,
+ GLAMO_CLOCK_MPEG_ENC_RESET = 0x1000,
+ GLAMO_CLOCK_MPEG_DEC_RESET = 0x2000,
+};
+
+enum glamo_reg_clock51 {
+ GLAMO_CLOCK_GEN51_EN_DIV_MCLK = 0x0001,
+ GLAMO_CLOCK_GEN51_EN_DIV_SCLK = 0x0002,
+ GLAMO_CLOCK_GEN51_EN_DIV_JCLK = 0x0004,
+ GLAMO_CLOCK_GEN51_EN_DIV_DCLK = 0x0008,
+ GLAMO_CLOCK_GEN51_EN_DIV_DMCLK = 0x0010,
+ GLAMO_CLOCK_GEN51_EN_DIV_DHCLK = 0x0020,
+ GLAMO_CLOCK_GEN51_EN_DIV_GCLK = 0x0040,
+ GLAMO_CLOCK_GEN51_EN_DIV_TCLK = 0x0080,
+ /* FIXME: higher bits */
+};
+
+enum glamo_reg_hostbus2 {
+ GLAMO_HOSTBUS2_MMIO_EN_ISP = 0x0001,
+ GLAMO_HOSTBUS2_MMIO_EN_JPEG = 0x0002,
+ GLAMO_HOSTBUS2_MMIO_EN_MPEG = 0x0004,
+ GLAMO_HOSTBUS2_MMIO_EN_LCD = 0x0008,
+ GLAMO_HOSTBUS2_MMIO_EN_MMC = 0x0010,
+ GLAMO_HOSTBUS2_MMIO_EN_MICROP0 = 0x0020,
+ GLAMO_HOSTBUS2_MMIO_EN_MICROP1 = 0x0040,
+ GLAMO_HOSTBUS2_MMIO_EN_CQ = 0x0080,
+ GLAMO_HOSTBUS2_MMIO_EN_RISC = 0x0100,
+ GLAMO_HOSTBUS2_MMIO_EN_2D = 0x0200,
+ GLAMO_HOSTBUS2_MMIO_EN_3D = 0x0400,
+};
+
+/* LCD Controller */
+
+#define REG_LCD(x) (x)
+enum glamo_reg_lcd {
+ GLAMO_REG_LCD_MODE1 = REG_LCD(0x00),
+ GLAMO_REG_LCD_MODE2 = REG_LCD(0x02),
+ GLAMO_REG_LCD_MODE3 = REG_LCD(0x04),
+ GLAMO_REG_LCD_WIDTH = REG_LCD(0x06),
+ GLAMO_REG_LCD_HEIGHT = REG_LCD(0x08),
+ GLAMO_REG_LCD_POLARITY = REG_LCD(0x0a),
+ GLAMO_REG_LCD_A_BASE1 = REG_LCD(0x0c),
+ GLAMO_REG_LCD_A_BASE2 = REG_LCD(0x0e),
+ GLAMO_REG_LCD_B_BASE1 = REG_LCD(0x10),
+ GLAMO_REG_LCD_B_BASE2 = REG_LCD(0x12),
+ GLAMO_REG_LCD_C_BASE1 = REG_LCD(0x14),
+ GLAMO_REG_LCD_C_BASE2 = REG_LCD(0x16),
+ GLAMO_REG_LCD_PITCH = REG_LCD(0x18),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_TOTAL = REG_LCD(0x1c),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_RETR_START = REG_LCD(0x20),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_RETR_END = REG_LCD(0x24),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_DISP_START = REG_LCD(0x28),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_DISP_END = REG_LCD(0x2c),
+ /* RES */
+ GLAMO_REG_LCD_VERT_TOTAL = REG_LCD(0x30),
+ /* RES */
+ GLAMO_REG_LCD_VERT_RETR_START = REG_LCD(0x34),
+ /* RES */
+ GLAMO_REG_LCD_VERT_RETR_END = REG_LCD(0x38),
+ /* RES */
+ GLAMO_REG_LCD_VERT_DISP_START = REG_LCD(0x3c),
+ /* RES */
+ GLAMO_REG_LCD_VERT_DISP_END = REG_LCD(0x40),
+ /* RES */
+ GLAMO_REG_LCD_POL = REG_LCD(0x44),
+ GLAMO_REG_LCD_DATA_START = REG_LCD(0x46),
+ GLAMO_REG_LCD_FRATE_CONTRO = REG_LCD(0x48),
+ GLAMO_REG_LCD_DATA_CMD_HDR = REG_LCD(0x4a),
+ GLAMO_REG_LCD_SP_START = REG_LCD(0x4c),
+ GLAMO_REG_LCD_SP_END = REG_LCD(0x4e),
+ GLAMO_REG_LCD_CURSOR_BASE1 = REG_LCD(0x50),
+ GLAMO_REG_LCD_CURSOR_BASE2 = REG_LCD(0x52),
+ GLAMO_REG_LCD_CURSOR_PITCH = REG_LCD(0x54),
+ GLAMO_REG_LCD_CURSOR_X_SIZE = REG_LCD(0x56),
+ GLAMO_REG_LCD_CURSOR_Y_SIZE = REG_LCD(0x58),
+ GLAMO_REG_LCD_CURSOR_X_POS = REG_LCD(0x5a),
+ GLAMO_REG_LCD_CURSOR_Y_POS = REG_LCD(0x5c),
+ GLAMO_REG_LCD_CURSOR_PRESET = REG_LCD(0x5e),
+ GLAMO_REG_LCD_CURSOR_FG_COLOR = REG_LCD(0x60),
+ /* RES */
+ GLAMO_REG_LCD_CURSOR_BG_COLOR = REG_LCD(0x64),
+ /* RES */
+ GLAMO_REG_LCD_CURSOR_DST_COLOR = REG_LCD(0x68),
+ /* RES */
+ GLAMO_REG_LCD_STATUS1 = REG_LCD(0x80),
+ GLAMO_REG_LCD_STATUS2 = REG_LCD(0x82),
+ GLAMO_REG_LCD_STATUS3 = REG_LCD(0x84),
+ GLAMO_REG_LCD_STATUS4 = REG_LCD(0x86),
+ /* RES */
+ GLAMO_REG_LCD_COMMAND1 = REG_LCD(0xa0),
+ GLAMO_REG_LCD_COMMAND2 = REG_LCD(0xa2),
+ /* RES */
+ GLAMO_REG_LCD_WFORM_DELAY1 = REG_LCD(0xb0),
+ GLAMO_REG_LCD_WFORM_DELAY2 = REG_LCD(0xb2),
+ /* RES */
+ GLAMO_REG_LCD_GAMMA_CORR = REG_LCD(0x100),
+ /* RES */
+ GLAMO_REG_LCD_GAMMA_R_ENTRY01 = REG_LCD(0x110),
+ GLAMO_REG_LCD_GAMMA_R_ENTRY23 = REG_LCD(0x112),
+ GLAMO_REG_LCD_GAMMA_R_ENTRY45 = REG_LCD(0x114),
+ GLAMO_REG_LCD_GAMMA_R_ENTRY67 = REG_LCD(0x116),
+ GLAMO_REG_LCD_GAMMA_R_ENTRY8 = REG_LCD(0x118),
+ /* RES */
+ GLAMO_REG_LCD_GAMMA_G_ENTRY01 = REG_LCD(0x130),
+ GLAMO_REG_LCD_GAMMA_G_ENTRY23 = REG_LCD(0x132),
+ GLAMO_REG_LCD_GAMMA_G_ENTRY45 = REG_LCD(0x134),
+ GLAMO_REG_LCD_GAMMA_G_ENTRY67 = REG_LCD(0x136),
+ GLAMO_REG_LCD_GAMMA_G_ENTRY8 = REG_LCD(0x138),
+ /* RES */
+ GLAMO_REG_LCD_GAMMA_B_ENTRY01 = REG_LCD(0x150),
+ GLAMO_REG_LCD_GAMMA_B_ENTRY23 = REG_LCD(0x152),
+ GLAMO_REG_LCD_GAMMA_B_ENTRY45 = REG_LCD(0x154),
+ GLAMO_REG_LCD_GAMMA_B_ENTRY67 = REG_LCD(0x156),
+ GLAMO_REG_LCD_GAMMA_B_ENTRY8 = REG_LCD(0x158),
+ /* RES */
+ GLAMO_REG_LCD_SRAM_DRIVING1 = REG_LCD(0x160),
+ GLAMO_REG_LCD_SRAM_DRIVING2 = REG_LCD(0x162),
+ GLAMO_REG_LCD_SRAM_DRIVING3 = REG_LCD(0x164),
+};
+
+enum glamo_reg_lcd_mode1 {
+ GLAMO_LCD_MODE1_PWRSAVE = 0x0001,
+ GLAMO_LCD_MODE1_PARTIAL_PRT = 0x0002,
+ GLAMO_LCD_MODE1_HWFLIP = 0x0004,
+ GLAMO_LCD_MODE1_LCD2 = 0x0008,
+ /* RES */
+ GLAMO_LCD_MODE1_PARTIAL_MODE = 0x0020,
+ GLAMO_LCD_MODE1_CURSOR_DSTCOLOR = 0x0040,
+ GLAMO_LCD_MODE1_PARTIAL_ENABLE = 0x0080,
+ GLAMO_LCD_MODE1_TVCLK_IN_ENABLE = 0x0100,
+ GLAMO_LCD_MODE1_HSYNC_HIGH_ACT = 0x0200,
+ GLAMO_LCD_MODE1_VSYNC_HIGH_ACT = 0x0400,
+ GLAMO_LCD_MODE1_HSYNC_FLIP = 0x0800,
+ GLAMO_LCD_MODE1_GAMMA_COR_EN = 0x1000,
+ GLAMO_LCD_MODE1_DITHER_EN = 0x2000,
+ GLAMO_LCD_MODE1_CURSOR_EN = 0x4000,
+ GLAMO_LCD_MODE1_ROTATE_EN = 0x8000,
+};
+
+enum glamo_reg_lcd_mode2 {
+ GLAMO_LCD_MODE2_CRC_CHECK_EN = 0x0001,
+ GLAMO_LCD_MODE2_DCMD_PER_LINE = 0x0002,
+ GLAMO_LCD_MODE2_NOUSE_BDEF = 0x0004,
+ GLAMO_LCD_MODE2_OUT_POS_MODE = 0x0008,
+ GLAMO_LCD_MODE2_FRATE_CTRL_EN = 0x0010,
+ GLAMO_LCD_MODE2_SINGLE_BUFFER = 0x0020,
+ GLAMO_LCD_MODE2_SER_LSB_TO_MSB = 0x0040,
+ /* FIXME */
+};
+
+enum glamo_reg_lcd_mode3 {
+ /* LCD color source data format */
+ GLAMO_LCD_SRC_RGB565 = 0x0000,
+ GLAMO_LCD_SRC_ARGB1555 = 0x4000,
+ GLAMO_LCD_SRC_ARGB4444 = 0x8000,
+ /* interface type */
+ GLAMO_LCD_MODE3_LCD = 0x1000,
+ GLAMO_LCD_MODE3_RGB = 0x0800,
+ GLAMO_LCD_MODE3_CPU = 0x0000,
+ /* mode */
+ GLAMO_LCD_MODE3_RGB332 = 0x0000,
+ GLAMO_LCD_MODE3_RGB444 = 0x0100,
+ GLAMO_LCD_MODE3_RGB565 = 0x0200,
+ GLAMO_LCD_MODE3_RGB666 = 0x0300,
+ /* depth */
+ GLAMO_LCD_MODE3_6BITS = 0x0000,
+ GLAMO_LCD_MODE3_8BITS = 0x0010,
+ GLAMO_LCD_MODE3_9BITS = 0x0020,
+ GLAMO_LCD_MODE3_16BITS = 0x0030,
+ GLAMO_LCD_MODE3_18BITS = 0x0040,
+};
+
+enum glamo_lcd_rot_mode {
+ GLAMO_LCD_ROT_MODE_0 = 0x0000,
+ GLAMO_LCD_ROT_MODE_180 = 0x2000,
+ GLAMO_LCD_ROT_MODE_MIRROR = 0x4000,
+ GLAMO_LCD_ROT_MODE_FLIP = 0x6000,
+ GLAMO_LCD_ROT_MODE_90 = 0x8000,
+ GLAMO_LCD_ROT_MODE_270 = 0xa000,
+};
+#define GLAMO_LCD_ROT_MODE_MASK 0xe000
+
+enum glamo_lcd_cmd_type {
+ GLAMO_LCD_CMD_TYPE_DISP = 0x0000,
+ GLAMO_LCD_CMD_TYPE_PARALLEL = 0x4000,
+ GLAMO_LCD_CMD_TYPE_SERIAL = 0x8000,
+ GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT= 0xc000,
+};
+#define GLAMO_LCD_CMD_TYPE_MASK 0xc000
+
+enum glamo_lcd_cmds {
+ GLAMO_LCD_CMD_DATA_DISP_FIRE = 0x00,
+ GLAMO_LCD_CMD_DATA_DISP_SYNC = 0x01, /* RGB only */
+ /* switch to command mode, no display */
+ GLAMO_LCD_CMD_DATA_FIRE_NO_DISP = 0x02,
+ /* display until VSYNC, switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC = 0x11,
+ /* display until HSYNC, switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_HSYNC = 0x12,
+ /* display until VSYNC, 1 black frame, VSYNC, switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B = 0x13,
+ /* don't care about display and switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_FREE = 0x14, /* RGB only */
+ /* don't care about display, keep data display but disable data,
+ * and switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_FREE_D = 0x15, /* RGB only */
+};
+
+enum glamo_core_revisions {
+ GLAMO_CORE_REV_A0 = 0x0000,
+ GLAMO_CORE_REV_A1 = 0x0001,
+ GLAMO_CORE_REV_A2 = 0x0002,
+ GLAMO_CORE_REV_A3 = 0x0003,
+};
+
+#endif /* _GLAMO_REGS_H */
--- /dev/null
+/*
+ * Bluetooth PM code for the FIC gta02 GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+static ssize_t pm_host_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%d\n",
+ pcf50633_gpio_get(gta02_pcf, PCF50633_GPO)
+ == PCF50633_GPOCFG_GPOSEL_1);
+}
+
+static ssize_t pm_host_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long on = simple_strtoul(buf, NULL, 10);
+ u8 val;
+
+ if (on)
+ val = PCF50633_GPOCFG_GPOSEL_1;
+ else
+ val = PCF50633_GPOCFG_GPOSEL_0;
+
+
+ pcf50633_gpio_set(gta02_pcf, PCF50633_GPO, val);
+
+ return count;
+}
+
+static DEVICE_ATTR(hostmode, 0644, pm_host_read, pm_host_write);
+
+static struct attribute *gta02_pm_host_sysfs_entries[] = {
+ &dev_attr_hostmode.attr,
+ NULL
+};
+
+static struct attribute_group gta02_pm_host_attr_group = {
+ .name = NULL,
+ .attrs = gta02_pm_host_sysfs_entries,
+};
+
+static int __init gta02_pm_host_probe(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "starting\n");
+ return sysfs_create_group(&pdev->dev.kobj, >a02_pm_host_attr_group);
+}
+
+static int gta02_pm_host_remove(struct platform_device *pdev)
+{
+ sysfs_remove_group(&pdev->dev.kobj, >a02_pm_host_attr_group);
+ return 0;
+}
+
+static struct platform_driver gta02_pm_host_driver = {
+ .probe = gta02_pm_host_probe,
+ .remove = gta02_pm_host_remove,
+ .driver = {
+ .name = "gta02-pm-host",
+ },
+};
+
+static int __devinit gta02_pm_host_init(void)
+{
+ return platform_driver_register(>a02_pm_host_driver);
+}
+
+static void gta02_pm_host_exit(void)
+{
+ platform_driver_unregister(>a02_pm_host_driver);
+}
+
+module_init(gta02_pm_host_init);
+module_exit(gta02_pm_host_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("Openmoko Freerunner USB Host Power Management");
--- /dev/null
+/*
+ * Resume reason sysfs for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2008 by Openmoko Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License resume_reason 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/regs-gpio.h>
+
+static unsigned int *gstatus4_mapped;
+static char *resume_reasons[17] = {
+ "EINT00_ACCEL1",
+ "EINT01_GSM",
+ "EINT02_BLUETOOTH",
+ "EINT03_DEBUGBRD",
+ "EINT04_JACK",
+ "EINT05_WLAN",
+ "EINT06_AUXKEY",
+ "EINT07_HOLDKEY",
+ "EINT08_ACCEL2",
+ "EINT09_PMU",
+ "EINT10_NULL",
+ "EINT11_NULL",
+ "EINT12_GLAMO",
+ "EINT13_NULL",
+ "EINT14_NULL",
+ "EINT15_NULL",
+ NULL
+};
+
+static ssize_t resume_reason_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int bit = 0;
+ char *end = buf;
+
+ for (bit = 0; resume_reasons[bit]; bit++) {
+ if ((*gstatus4_mapped) & (1 << bit))
+ end += sprintf(end, "* %s\n", resume_reasons[bit]);
+ else
+ end += sprintf(end, " %s\n", resume_reasons[bit]);
+
+ }
+
+ return end - buf;
+}
+
+
+static DEVICE_ATTR(resume_reason, 0644, resume_reason_read, NULL);
+
+static struct attribute *gta02_resume_reason_sysfs_entries[] = {
+ &dev_attr_resume_reason.attr,
+ NULL
+};
+
+static struct attribute_group gta02_resume_reason_attr_group = {
+ .name = NULL,
+ .attrs = gta02_resume_reason_sysfs_entries,
+};
+
+static int __init gta02_resume_reason_probe(struct platform_device *pdev)
+{
+ dev_info(&pdev->dev, "starting\n");
+
+ gstatus4_mapped = ioremap(S3C24XX_GSTATUS4, 0x4);
+ if (!gstatus4_mapped) {
+ dev_err(&pdev->dev, "failed to ioremap() memory region\n");
+ return -EINVAL;
+ }
+
+ return sysfs_create_group(&pdev->dev.kobj,
+ >a02_resume_reason_attr_group);
+}
+
+static int gta02_resume_reason_remove(struct platform_device *pdev)
+{
+ sysfs_remove_group(&pdev->dev.kobj, >a02_resume_reason_attr_group);
+ iounmap(gstatus4_mapped);
+ return 0;
+}
+
+static struct platform_driver gta02_resume_reason_driver = {
+ .probe = gta02_resume_reason_probe,
+ .remove = gta02_resume_reason_remove,
+ .driver = {
+ .name = "gta02-resume-reason",
+ },
+};
+
+static int __devinit gta02_resume_reason_init(void)
+{
+ return platform_driver_register(>a02_resume_reason_driver);
+}
+
+static void gta02_resume_reason_exit(void)
+{
+ platform_driver_unregister(>a02_resume_reason_driver);
+}
+
+module_init(gta02_resume_reason_init);
+module_exit(gta02_resume_reason_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("GTA02 resume_reason");
--- /dev/null
+/*
+ * Driver for batteries with bq27000 chips inside via HDQ
+ *
+ * Copyright 2008 Openmoko, Inc
+ * Andy Green <andy@openmoko.com>
+ *
+ * based on ds2760 driver, original copyright notice for that --->
+ *
+ * Copyright © 2007 Anton Vorontsov
+ * 2004-2007 Matt Reimer
+ * 2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author: Anton Vorontsov <cbou@mail.ru>
+ * February 2007
+ *
+ * Matt Reimer <mreimer@vpop.net>
+ * April 2004, 2005, 2007
+ *
+ * Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ * September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/bq27000_battery.h>
+
+enum bq27000_regs {
+ /* RAM regs */
+ /* read-write after this */
+ BQ27000_CTRL = 0, /* Device Control Register */
+ BQ27000_MODE, /* Device Mode Register */
+ BQ27000_AR_L, /* At-Rate H L */
+ BQ27000_AR_H,
+ /* read-only after this */
+ BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
+ BQ27000_ARTTE_H,
+ BQ27000_TEMP_L, /* Reported Temperature H L */
+ BQ27000_TEMP_H,
+ BQ27000_VOLT_L, /* Reported Voltage H L */
+ BQ27000_VOLT_H,
+ BQ27000_FLAGS, /* Status Flags */
+ BQ27000_RSOC, /* Relative State of Charge */
+ BQ27000_NAC_L, /* Nominal Available Capacity H L */
+ BQ27000_NAC_H,
+ BQ27000_CACD_L, /* Discharge Compensated H L */
+ BQ27000_CACD_H,
+ BQ27000_CACT_L, /* Temperature Compensated H L */
+ BQ27000_CACT_H,
+ BQ27000_LMD_L, /* Last measured discharge H L */
+ BQ27000_LMD_H,
+ BQ27000_AI_L, /* Average Current H L */
+ BQ27000_AI_H,
+ BQ27000_TTE_L, /* Time to Empty H L */
+ BQ27000_TTE_H,
+ BQ27000_TTF_L, /* Time to Full H L */
+ BQ27000_TTF_H,
+ BQ27000_SI_L, /* Standby Current H L */
+ BQ27000_SI_H,
+ BQ27000_STTE_L, /* Standby Time To Empty H L */
+ BQ27000_STTE_H,
+ BQ27000_MLI_L, /* Max Load Current H L */
+ BQ27000_MLI_H,
+ BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
+ BQ27000_MLTTE_H,
+ BQ27000_SAE_L, /* Available Energy H L */
+ BQ27000_SAE_H,
+ BQ27000_AP_L, /* Available Power H L */
+ BQ27000_AP_H,
+ BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
+ BQ27000_TTECP_H,
+ BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
+ BQ27000_CYCL_H,
+ BQ27000_CYCT_L, /* Cycle Count Total H L */
+ BQ27000_CYCT_H,
+ BQ27000_CSOC, /* Compensated State Of Charge */
+ /* EEPROM regs */
+ /* read-write after this */
+ BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
+ BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
+ BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
+ BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
+ BQ27000_EE_ISLC, /* Initial Standby Load Current */
+ BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
+ BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
+ BQ27000_EE_PKCFG, /* Pack Configuration Values */
+ BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
+ BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
+ BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
+};
+
+enum bq27000_status_flags {
+ BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
+ BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
+ BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
+ BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely innacurate */
+ BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
+ BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
+ BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
+ BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
+};
+
+#define NANOVOLTS_UNIT 3750
+
+struct bq27000_bat_regs {
+ int ai;
+ int flags;
+ int lmd;
+ int rsoc;
+ int temp;
+ int tte;
+ int ttf;
+ int volt;
+};
+
+struct bq27000_device_info {
+ struct device *dev;
+ struct power_supply bat;
+ struct power_supply ac;
+ struct power_supply usb;
+ struct delayed_work work;
+ struct bq27000_platform_data *pdata;
+
+ struct bq27000_bat_regs regs;
+};
+
+static unsigned int cache_time = 5000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+/*
+ * reading 16 bit values over HDQ has a special hazard where the
+ * hdq device firmware can update the 16-bit register during the time we
+ * read the two halves. TI document SLUS556D recommends the algorithm here
+ * to avoid trouble
+ */
+
+static int hdq_read16(struct bq27000_device_info *di, int address)
+{
+ int acc;
+ int high;
+ int retries = 3;
+
+ while (retries--) {
+
+ high = (di->pdata->hdq_read)(address + 1); /* high part */
+
+ if (high < 0)
+ return high;
+ acc = (di->pdata->hdq_read)(address);
+ if (acc < 0)
+ return acc;
+
+ /* confirm high didn't change between reading it and low */
+ if (high == (di->pdata->hdq_read)(address + 1))
+ return (high << 8) | acc;
+ }
+
+ return -ETIME;
+}
+
+static void bq27000_battery_external_power_changed(struct power_supply *psy)
+{
+ struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+ dev_dbg(di->dev, "%s\n", __FUNCTION__);
+ schedule_delayed_work(&di->work, 0);
+}
+
+static int bq27000_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int n;
+ struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+ if (di->regs.rsoc < 0 && psp != POWER_SUPPLY_PROP_PRESENT)
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (!di->pdata->get_charger_online_status)
+ goto use_bat;
+ if ((di->pdata->get_charger_online_status)()) {
+ /*
+ * charger is definitively present
+ * we report our state in terms of what it says it
+ * is doing
+ */
+ if (!di->pdata->get_charger_active_status)
+ goto use_bat;
+
+ if ((di->pdata->get_charger_active_status)()) {
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ }
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+
+ /*
+ * platform provided definite indication of charger presence,
+ * and it is telling us it isn't there... but we are on so we
+ * must be running from battery --->
+ */
+
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+
+use_bat:
+ /*
+ * either the charger is not connected, or the
+ * platform doesn't give info about charger, use battery state
+ * but... battery state can be out of date by 4 seconds or
+ * so... use the platform callbacks if possible.
+ */
+
+ /* no real activity on the battery */
+ if (di->regs.ai < 2) {
+ if (!di->regs.ttf)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+ /* power is actually going in or out... */
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_CHGS)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ /* Do we have accurate readings... */
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_VDQ)
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (di->regs.volt < 0)
+ return di->regs.volt;
+ /* mV -> uV */
+ val->intval = di->regs.volt * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_CHGS)
+ n = -NANOVOLTS_UNIT;
+ else
+ n = NANOVOLTS_UNIT;
+ if (di->regs.ai < 0)
+ return di->regs.ai;
+ val->intval = (di->regs.ai * n) / di->pdata->rsense_mohms;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ if (di->regs.lmd < 0)
+ return di->regs.lmd;
+ val->intval = (di->regs.lmd * 3570) / di->pdata->rsense_mohms;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (di->regs.temp < 0)
+ return di->regs.temp;
+ /* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
+ /* 10926 = 27315 * 4 / 10 */
+ val->intval = (((long)di->regs.temp * 10l) - 10926) / 4;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = di->regs.rsoc;
+ if (val->intval < 0)
+ return val->intval;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !(di->regs.rsoc < 0);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ if (di->regs.tte < 0)
+ return di->regs.tte;
+ val->intval = 60 * di->regs.tte;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ if (di->regs.ttf < 0)
+ return di->regs.ttf;
+ val->intval = 60 * di->regs.ttf;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (di->pdata->get_charger_online_status)
+ val->intval = (di->pdata->get_charger_online_status)();
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void bq27000_battery_work(struct work_struct *work)
+{
+ struct bq27000_device_info *di =
+ container_of(work, struct bq27000_device_info, work.work);
+
+ if ((di->pdata->hdq_initialized)()) {
+ struct bq27000_bat_regs regs;
+
+ regs.ai = hdq_read16(di, BQ27000_AI_L);
+ regs.flags = (di->pdata->hdq_read)(BQ27000_FLAGS);
+ regs.lmd = hdq_read16(di, BQ27000_LMD_L);
+ regs.rsoc = (di->pdata->hdq_read)(BQ27000_RSOC);
+ regs.temp = hdq_read16(di, BQ27000_TEMP_L);
+ regs.tte = hdq_read16(di, BQ27000_TTE_L);
+ regs.ttf = hdq_read16(di, BQ27000_TTF_L);
+ regs.volt = hdq_read16(di, BQ27000_VOLT_L);
+
+ if (memcmp (®s, &di->regs, sizeof(regs)) != 0) {
+ di->regs = regs;
+ power_supply_changed(&di->bat);
+ }
+ }
+
+ if (!schedule_delayed_work(&di->work, cache_time))
+ dev_err(di->dev, "battery service reschedule failed\n");
+}
+
+static enum power_supply_property bq27000_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_ONLINE
+};
+
+static int bq27000_battery_probe(struct platform_device *pdev)
+{
+ int retval = 0;
+ struct bq27000_device_info *di;
+ struct bq27000_platform_data *pdata;
+
+ dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
+
+ di = kzalloc(sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ retval = -ENOMEM;
+ goto di_alloc_failed;
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ pdata = pdev->dev.platform_data;
+ di->dev = &pdev->dev;
+ /* di->w1_dev = pdev->dev.parent; */
+ di->bat.name = pdata->name;
+ di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->bat.properties = bq27000_battery_props;
+ di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
+ di->bat.get_property = bq27000_battery_get_property;
+ di->bat.external_power_changed =
+ bq27000_battery_external_power_changed;
+ di->bat.use_for_apm = 1;
+ di->pdata = pdata;
+
+ retval = power_supply_register(&pdev->dev, &di->bat);
+ if (retval) {
+ dev_err(di->dev, "failed to register battery\n");
+ goto batt_failed;
+ }
+
+ INIT_DELAYED_WORK(&di->work, bq27000_battery_work);
+
+ if (!schedule_delayed_work(&di->work, 0))
+ dev_err(di->dev, "failed to schedule bq27000_battery_work\n");
+
+ return 0;
+
+batt_failed:
+ kfree(di);
+di_alloc_failed:
+ return retval;
+}
+
+static int bq27000_battery_remove(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&di->work);
+
+ power_supply_unregister(&di->bat);
+
+ return 0;
+}
+
+void bq27000_charging_state_change(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ if (!di)
+ return;
+}
+EXPORT_SYMBOL_GPL(bq27000_charging_state_change);
+
+#ifdef CONFIG_PM
+
+static int bq27000_battery_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&di->work);
+ return 0;
+}
+
+static int bq27000_battery_resume(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ schedule_delayed_work(&di->work, 0);
+ return 0;
+}
+
+#else
+
+#define bq27000_battery_suspend NULL
+#define bq27000_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct platform_driver bq27000_battery_driver = {
+ .driver = {
+ .name = "bq27000-battery",
+ },
+ .probe = bq27000_battery_probe,
+ .remove = bq27000_battery_remove,
+ .suspend = bq27000_battery_suspend,
+ .resume = bq27000_battery_resume,
+};
+
+static int __init bq27000_battery_init(void)
+{
+ return platform_driver_register(&bq27000_battery_driver);
+}
+
+static void __exit bq27000_battery_exit(void)
+{
+ platform_driver_unregister(&bq27000_battery_driver);
+}
+
+module_init(bq27000_battery_init);
+module_exit(bq27000_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("bq27000 battery driver");
--- /dev/null
+/*
+ * HDQ generic GPIO bitbang driver using FIQ
+ *
+ * (C) 2006-2007 by Openmoko, Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/hdq.h>
+
+#define HDQ_READ 0
+#define HDQ_WRITE 0x80
+
+enum hdq_bitbang_states {
+ HDQB_IDLE = 0,
+ HDQB_TX_BREAK,
+ HDQB_TX_BREAK_RECOVERY,
+ HDQB_ADS_CALC,
+ HDQB_ADS_LOW,
+ HDQB_ADS_HIGH,
+ HDQB_WAIT_RX,
+ HDQB_DATA_RX_LOW,
+ HDQB_DATA_RX_HIGH,
+ HDQB_WAIT_TX,
+};
+
+static struct hdq_priv {
+ u8 hdq_probed; /* nonzero after HDQ driver probed */
+ struct mutex hdq_lock; /* if you want to use hdq, you have to take lock */
+ unsigned long hdq_gpio_pin; /* GTA02 = GPD14 which pin to meddle with */
+ u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */
+ u8 hdq_tx_data; /* data to tx for write action */
+ u8 hdq_rx_data; /* data received in read action */
+ u8 hdq_request_ctr; /* incremented by "user" to request a transfer */
+ u8 hdq_transaction_ctr; /* incremented after each transfer */
+ u8 hdq_error; /* 0 = no error */
+ u8 hdq_ctr;
+ u8 hdq_ctr2;
+ u8 hdq_bit;
+ u8 hdq_shifter;
+ u8 hdq_tx_data_done;
+ enum hdq_bitbang_states hdq_state;
+ int reported_error;
+
+ struct hdq_platform_data *pdata;
+} hdq_priv;
+
+
+static void hdq_bad(void)
+{
+ if (!hdq_priv.reported_error)
+ printk(KERN_ERR "HDQ error: %d\n", hdq_priv.hdq_error);
+ hdq_priv.reported_error = 1;
+}
+
+static void hdq_good(void)
+{
+ if (hdq_priv.reported_error)
+ printk(KERN_INFO "HDQ responds again\n");
+ hdq_priv.reported_error = 0;
+}
+
+int hdq_fiq_handler(void)
+{
+ if (!hdq_priv.hdq_probed)
+ return 0;
+
+ switch (hdq_priv.hdq_state) {
+ case HDQB_IDLE:
+ if (hdq_priv.hdq_request_ctr == hdq_priv.hdq_transaction_ctr)
+ break;
+ hdq_priv.hdq_ctr = 250 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.pdata->gpio_set(0);
+ hdq_priv.pdata->gpio_dir_out();
+ hdq_priv.hdq_tx_data_done = 0;
+ hdq_priv.hdq_state = HDQB_TX_BREAK;
+ break;
+
+ case HDQB_TX_BREAK: /* issue low for > 190us */
+ if (--hdq_priv.hdq_ctr == 0) {
+ hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_TX_BREAK_RECOVERY;
+ hdq_priv.pdata->gpio_set(1);
+ }
+ break;
+
+ case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */
+ if (--hdq_priv.hdq_ctr)
+ break;
+ hdq_priv.hdq_shifter = hdq_priv.hdq_ads;
+ hdq_priv.hdq_bit = 8; /* 8 bits of ads / rw */
+ hdq_priv.hdq_tx_data_done = 0; /* doing ads */
+ /* fallthru on last one */
+ case HDQB_ADS_CALC:
+ if (hdq_priv.hdq_shifter & 1)
+ hdq_priv.hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US;
+ else
+ hdq_priv.hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US;
+ /* carefully precompute the other phase length */
+ hdq_priv.hdq_ctr2 = (210 - (hdq_priv.hdq_ctr * HDQ_SAMPLE_PERIOD_US)) /
+ HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_ADS_LOW;
+ hdq_priv.hdq_shifter >>= 1;
+ hdq_priv.hdq_bit--;
+ hdq_priv.pdata->gpio_set(0);
+ break;
+
+ case HDQB_ADS_LOW:
+ if (--hdq_priv.hdq_ctr)
+ break;
+ hdq_priv.pdata->gpio_set(1);
+ hdq_priv.hdq_state = HDQB_ADS_HIGH;
+ break;
+
+ case HDQB_ADS_HIGH:
+ if (--hdq_priv.hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */
+ break;
+ if (hdq_priv.hdq_bit) { /* more bits to do */
+ hdq_priv.hdq_state = HDQB_ADS_CALC;
+ break;
+ }
+ /* no more bits, wait it out until hdq_priv.hdq_ctr2 exhausted */
+ if (hdq_priv.hdq_ctr2)
+ break;
+ /* ok no more bits and very last state */
+ hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+ /* FIXME 0 = read */
+ if (hdq_priv.hdq_ads & 0x80) { /* write the byte out */
+ /* set delay before payload */
+ hdq_priv.hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US;
+ /* already high, no need to write */
+ hdq_priv.hdq_state = HDQB_WAIT_TX;
+ break;
+ }
+ /* read the next byte */
+ hdq_priv.hdq_bit = 8; /* 8 bits of data */
+ hdq_priv.hdq_ctr = 2500 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_WAIT_RX;
+ hdq_priv.pdata->gpio_dir_in();
+ break;
+
+ case HDQB_WAIT_TX: /* issue low for > 40us */
+ if (--hdq_priv.hdq_ctr)
+ break;
+ if (!hdq_priv.hdq_tx_data_done) { /* was that the data sent? */
+ hdq_priv.hdq_tx_data_done++;
+ hdq_priv.hdq_shifter = hdq_priv.hdq_tx_data;
+ hdq_priv.hdq_bit = 8; /* 8 bits of data */
+ hdq_priv.hdq_state = HDQB_ADS_CALC; /* start sending */
+ break;
+ }
+ hdq_priv.hdq_error = 0;
+ hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+ hdq_priv.hdq_state = HDQB_IDLE; /* all tx is done */
+ /* idle in input mode, it's pulled up by 10K */
+ hdq_priv.pdata->gpio_dir_in();
+ break;
+
+ case HDQB_WAIT_RX: /* wait for battery to talk to us */
+ if (hdq_priv.pdata->gpio_get() == 0) {
+ /* it talks to us! */
+ hdq_priv.hdq_ctr2 = 1;
+ hdq_priv.hdq_bit = 8; /* 8 bits of data */
+ /* timeout */
+ hdq_priv.hdq_ctr = 500 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
+ break;
+ }
+ if (--hdq_priv.hdq_ctr == 0) { /* timed out, error */
+ hdq_priv.hdq_error = 1;
+ hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+ hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+ }
+ break;
+
+ /*
+ * HDQ basically works by measuring the low time of the bit cell
+ * 32-50us --> '1', 80 - 145us --> '0'
+ */
+
+ case HDQB_DATA_RX_LOW:
+ if (hdq_priv.pdata->gpio_get()) {
+ hdq_priv.hdq_rx_data >>= 1;
+ if (hdq_priv.hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US))
+ hdq_priv.hdq_rx_data |= 0x80;
+
+ if (--hdq_priv.hdq_bit == 0) {
+ hdq_priv.hdq_error = 0;
+ hdq_priv.hdq_transaction_ctr =
+ hdq_priv.hdq_request_ctr;
+
+ hdq_priv.hdq_state = HDQB_IDLE;
+ } else
+ hdq_priv.hdq_state = HDQB_DATA_RX_HIGH;
+ /* timeout */
+ hdq_priv.hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_ctr2 = 1;
+ break;
+ }
+ hdq_priv.hdq_ctr2++;
+ if (--hdq_priv.hdq_ctr)
+ break;
+ /* timed out, error */
+ hdq_priv.hdq_error = 2;
+ hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+ hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+ break;
+
+ case HDQB_DATA_RX_HIGH:
+ if (!hdq_priv.pdata->gpio_get()) {
+ /* it talks to us! */
+ hdq_priv.hdq_ctr2 = 1;
+ /* timeout */
+ hdq_priv.hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
+ break;
+ }
+ if (--hdq_priv.hdq_ctr)
+ break;
+ /* timed out, error */
+ hdq_priv.hdq_error = 3;
+ hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+
+ /* we're in input mode already */
+ hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+ break;
+ }
+
+ /* Are we interested in keeping the FIQ source alive ? */
+ if (hdq_priv.hdq_state != HDQB_IDLE)
+ return 1;
+ else
+ return 0;
+}
+static int fiq_busy(void)
+{
+ int request = (volatile u8)hdq_priv.hdq_request_ctr;
+ int transact = (volatile u8)hdq_priv.hdq_transaction_ctr;
+
+
+ return (request != transact);
+}
+
+int hdq_initialized(void)
+{
+ return hdq_priv.hdq_probed;
+}
+EXPORT_SYMBOL_GPL(hdq_initialized);
+
+int hdq_read(int address)
+{
+ int count_sleeps = 5;
+ int ret = -ETIME;
+
+ if (!hdq_priv.hdq_probed)
+ return -EINVAL;
+
+ mutex_lock(&hdq_priv.hdq_lock);
+
+ hdq_priv.hdq_error = 0;
+ hdq_priv.hdq_ads = address | HDQ_READ;
+ hdq_priv.hdq_request_ctr++;
+ hdq_priv.pdata->kick_fiq();
+ /*
+ * FIQ takes care of it while we block our calling process
+ * But we're not spinning -- other processes run normally while
+ * we wait for the result
+ */
+ while (count_sleeps--) {
+ msleep(10); /* valid transaction always completes in < 10ms */
+
+ if (fiq_busy())
+ continue;
+
+ if (hdq_priv.hdq_error) {
+ hdq_bad();
+ goto done; /* didn't see a response in good time */
+ }
+ hdq_good();
+
+ ret = hdq_priv.hdq_rx_data;
+ goto done;
+ }
+
+done:
+ mutex_unlock(&hdq_priv.hdq_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hdq_read);
+
+int hdq_write(int address, u8 data)
+{
+ int count_sleeps = 5;
+ int ret = -ETIME;
+
+ if (!hdq_priv.hdq_probed)
+ return -EINVAL;
+
+ mutex_lock(&hdq_priv.hdq_lock);
+
+ hdq_priv.hdq_error = 0;
+ hdq_priv.hdq_ads = address | HDQ_WRITE;
+ hdq_priv.hdq_tx_data = data;
+ hdq_priv.hdq_request_ctr++;
+ hdq_priv.pdata->kick_fiq();
+ /*
+ * FIQ takes care of it while we block our calling process
+ * But we're not spinning -- other processes run normally while
+ * we wait for the result
+ */
+ while (count_sleeps--) {
+ msleep(10); /* valid transaction always completes in < 10ms */
+
+ if (fiq_busy())
+ continue; /* something bad with FIQ */
+
+ if (hdq_priv.hdq_error) {
+ hdq_bad();
+ goto done; /* didn't see a response in good time */
+ }
+ hdq_good();
+
+ ret = 0;
+ goto done;
+ }
+
+done:
+ mutex_unlock(&hdq_priv.hdq_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hdq_write);
+
+/* sysfs */
+
+static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int n;
+ int v;
+ u8 u8a[128]; /* whole address space for HDQ */
+ char *end = buf;
+
+ if (!hdq_priv.hdq_probed)
+ return -EINVAL;
+
+ /* the dump does not take care about 16 bit regs, because at this
+ * bus level we don't know about the chip details
+ */
+ for (n = 0; n < sizeof(u8a); n++) {
+ v = hdq_read(n);
+ if (v < 0)
+ goto bail;
+ u8a[n] = v;
+ }
+
+ for (n = 0; n < sizeof(u8a); n += 16) {
+ hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0);
+ end += strlen(end);
+ *end++ = '\n';
+ *end = '\0';
+ }
+ return (end - buf);
+
+bail:
+ return sprintf(buf, "ERROR %d\n", v);
+}
+
+/* you write by <address> <data>, eg, "34 128" */
+
+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
+
+static ssize_t hdq_sysfs_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ const char *end = buf + count;
+ int address = atoi(buf);
+
+ if (!hdq_priv.hdq_probed)
+ return -EINVAL;
+
+ while ((buf != end) && (*buf != ' '))
+ buf++;
+ if (buf >= end)
+ return 0;
+ while ((buf < end) && (*buf == ' '))
+ buf++;
+ if (buf >= end)
+ return 0;
+
+ hdq_write(address, atoi(buf));
+
+ return count;
+}
+
+static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL);
+static DEVICE_ATTR(write, 0600, NULL, hdq_sysfs_write);
+
+static struct attribute *hdq_sysfs_entries[] = {
+ &dev_attr_dump.attr,
+ &dev_attr_write.attr,
+ NULL
+};
+
+static struct attribute_group hdq_attr_group = {
+ .name = "hdq",
+ .attrs = hdq_sysfs_entries,
+};
+
+
+#ifdef CONFIG_PM
+static int hdq_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ /* after 18s of this, the battery monitor will also go to sleep */
+ hdq_priv.pdata->gpio_dir_in();
+ hdq_priv.pdata->disable_fiq();
+ return 0;
+}
+
+static int hdq_resume(struct platform_device *pdev)
+{
+ hdq_priv.pdata->gpio_set(1);
+ hdq_priv.pdata->gpio_dir_out();
+ hdq_priv.pdata->enable_fiq();
+ return 0;
+}
+#endif
+
+static int __init hdq_probe(struct platform_device *pdev)
+{
+ struct resource *r = platform_get_resource(pdev, 0, 0);
+ int ret;
+ struct hdq_platform_data *pdata = pdev->dev.platform_data;
+
+ if (!r || !pdata)
+ return -EINVAL;
+
+ platform_set_drvdata(pdev, NULL);
+
+ mutex_init(&hdq_priv.hdq_lock);
+
+ /* set our HDQ comms pin from the platform data */
+ hdq_priv.hdq_gpio_pin = r->start;
+ hdq_priv.pdata = pdata;
+
+ hdq_priv.pdata->gpio_set(1);
+ hdq_priv.pdata->gpio_dir_out();
+
+ /* Initialize FIQ */
+ if (hdq_priv.pdata->enable_fiq() < 0) {
+ dev_err(&pdev->dev, "Could not enable FIQ source\n");
+ return -EINVAL;
+ }
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &hdq_attr_group);
+ if (ret)
+ return ret;
+
+ hdq_priv.hdq_probed = 1; /* we are ready to do stuff now */
+
+ /*
+ * if wanted, users can defer registration of devices
+ * that depend on HDQ until after we register, and can use our
+ * device as parent so suspend-resume ordering is correct
+ */
+ if (pdata->attach_child_devices)
+ (pdata->attach_child_devices)(&pdev->dev);
+
+ hdq_priv.pdata = pdata;
+
+ return 0;
+}
+
+static int hdq_remove(struct platform_device *pdev)
+{
+ sysfs_remove_group(&pdev->dev.kobj, &hdq_attr_group);
+ return 0;
+}
+
+static struct platform_driver hdq_driver = {
+ .probe = hdq_probe,
+ .remove = hdq_remove,
+#ifdef CONFIG_PM
+ .suspend = hdq_suspend,
+ .resume = hdq_resume,
+#endif
+ .driver = {
+ .name = "hdq",
+ },
+};
+
+static int __init hdq_init(void)
+{
+ return platform_driver_register(&hdq_driver);
+}
+
+static void __exit hdq_exit(void)
+{
+ platform_driver_unregister(&hdq_driver);
+}
+
+module_init(hdq_init);
+module_exit(hdq_exit);
+
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("HDQ driver");
--- /dev/null
+/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC
+ *
+ * Copyright (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>,
+ * Stefan Schmidt <stefan@openmoko.org>
+ * Copyright (C) 2008 by Harald Welte <laforge@openmoko.org>
+ * Copyright (C) 2009 by Lars-Peter Clausen <lars@metafoo.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/jbt6k74.h>
+#include <linux/fb.h>
+#include <linux/lcd.h>
+#include <linux/time.h>
+
+enum jbt_register {
+ JBT_REG_SLEEP_IN = 0x10,
+ JBT_REG_SLEEP_OUT = 0x11,
+
+ JBT_REG_DISPLAY_OFF = 0x28,
+ JBT_REG_DISPLAY_ON = 0x29,
+
+ JBT_REG_RGB_FORMAT = 0x3a,
+ JBT_REG_QUAD_RATE = 0x3b,
+
+ JBT_REG_POWER_ON_OFF = 0xb0,
+ JBT_REG_BOOSTER_OP = 0xb1,
+ JBT_REG_BOOSTER_MODE = 0xb2,
+ JBT_REG_BOOSTER_FREQ = 0xb3,
+ JBT_REG_OPAMP_SYSCLK = 0xb4,
+ JBT_REG_VSC_VOLTAGE = 0xb5,
+ JBT_REG_VCOM_VOLTAGE = 0xb6,
+ JBT_REG_EXT_DISPL = 0xb7,
+ JBT_REG_OUTPUT_CONTROL = 0xb8,
+ JBT_REG_DCCLK_DCEV = 0xb9,
+ JBT_REG_DISPLAY_MODE1 = 0xba,
+ JBT_REG_DISPLAY_MODE2 = 0xbb,
+ JBT_REG_DISPLAY_MODE = 0xbc,
+ JBT_REG_ASW_SLEW = 0xbd,
+ JBT_REG_DUMMY_DISPLAY = 0xbe,
+ JBT_REG_DRIVE_SYSTEM = 0xbf,
+
+ JBT_REG_SLEEP_OUT_FR_A = 0xc0,
+ JBT_REG_SLEEP_OUT_FR_B = 0xc1,
+ JBT_REG_SLEEP_OUT_FR_C = 0xc2,
+ JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
+ JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
+ JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
+ JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
+
+ JBT_REG_GAMMA1_FINE_1 = 0xc7,
+ JBT_REG_GAMMA1_FINE_2 = 0xc8,
+ JBT_REG_GAMMA1_INCLINATION = 0xc9,
+ JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
+
+ /* VGA */
+ JBT_REG_BLANK_CONTROL = 0xcf,
+ JBT_REG_BLANK_TH_TV = 0xd0,
+ JBT_REG_CKV_ON_OFF = 0xd1,
+ JBT_REG_CKV_1_2 = 0xd2,
+ JBT_REG_OEV_TIMING = 0xd3,
+ JBT_REG_ASW_TIMING_1 = 0xd4,
+ JBT_REG_ASW_TIMING_2 = 0xd5,
+
+ /* QVGA */
+ JBT_REG_BLANK_CONTROL_QVGA = 0xd6,
+ JBT_REG_BLANK_TH_TV_QVGA = 0xd7,
+ JBT_REG_CKV_ON_OFF_QVGA = 0xd8,
+ JBT_REG_CKV_1_2_QVGA = 0xd9,
+ JBT_REG_OEV_TIMING_QVGA = 0xde,
+ JBT_REG_ASW_TIMING_1_QVGA = 0xdf,
+ JBT_REG_ASW_TIMING_2_QVGA = 0xe0,
+
+
+ JBT_REG_HCLOCK_VGA = 0xec,
+ JBT_REG_HCLOCK_QVGA = 0xed,
+
+};
+
+enum jbt_resolution {
+ JBT_RESOLUTION_VGA,
+ JBT_RESOLUTION_QVGA,
+};
+
+enum jbt_power_mode {
+ JBT_POWER_MODE_DEEP_STANDBY,
+ JBT_POWER_MODE_SLEEP,
+ JBT_POWER_MODE_NORMAL,
+};
+
+static const char *jbt_power_mode_names[] = {
+ [JBT_POWER_MODE_DEEP_STANDBY] = "deep-standby",
+ [JBT_POWER_MODE_SLEEP] = "sleep",
+ [JBT_POWER_MODE_NORMAL] = "normal",
+};
+
+static const char *jbt_resolution_names[] = {
+ [JBT_RESOLUTION_VGA] = "vga",
+ [JBT_RESOLUTION_QVGA] = "qvga",
+};
+
+struct jbt_info {
+ struct mutex lock; /* protects this structure */
+ enum jbt_resolution resolution;
+ enum jbt_power_mode power_mode;
+ enum jbt_power_mode suspend_mode;
+ int suspended;
+ struct spi_device *spi_dev;
+ struct lcd_device *lcd_dev;
+ unsigned long last_sleep;
+ struct delayed_work blank_work;
+ int blank_mode;
+ u16 tx_buf[4];
+ u16 reg_cache[0xEE];
+};
+
+#define JBT_COMMAND 0x000
+#define JBT_DATA 0x100
+
+static int jbt_reg_write_nodata(struct jbt_info *jbt, u8 reg)
+{
+ int rc;
+
+ jbt->tx_buf[0] = JBT_COMMAND | reg;
+ rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+ 1*sizeof(u16));
+ if (rc == 0)
+ jbt->reg_cache[reg] = 0;
+ else
+ dev_err(&jbt->spi_dev->dev, "jbt_reg_write_nodata spi_write ret %d\n",
+ rc);
+
+ return rc;
+}
+
+
+static int jbt_reg_write(struct jbt_info *jbt, u8 reg, u8 data)
+{
+ int rc;
+
+ jbt->tx_buf[0] = JBT_COMMAND | reg;
+ jbt->tx_buf[1] = JBT_DATA | data;
+ rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+ 2*sizeof(u16));
+ if (rc == 0)
+ jbt->reg_cache[reg] = data;
+ else
+ dev_err(&jbt->spi_dev->dev, "jbt_reg_write spi_write ret %d\n", rc);
+
+ return rc;
+}
+
+static int jbt_reg_write16(struct jbt_info *jbt, u8 reg, u16 data)
+{
+ int rc;
+
+ jbt->tx_buf[0] = JBT_COMMAND | reg;
+ jbt->tx_buf[1] = JBT_DATA | (data >> 8);
+ jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
+
+ rc = spi_write(jbt->spi_dev, (u8 *)jbt->tx_buf,
+ 3*sizeof(u16));
+ if (rc == 0)
+ jbt->reg_cache[reg] = data;
+ else
+ dev_err(&jbt->spi_dev->dev, "jbt_reg_write16 spi_write ret %d\n", rc);
+
+ return rc;
+}
+
+static int jbt_init_regs(struct jbt_info *jbt)
+{
+ int rc;
+
+ dev_dbg(&jbt->spi_dev->dev, "entering %cVGA mode\n",
+ jbt->resolution == JBT_RESOLUTION_QVGA ? 'Q' : ' ');
+
+ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
+ rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
+ rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
+ rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
+ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
+ rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
+ rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
+ rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
+ rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
+ rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
+ /*
+ * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
+ * to avoid red / blue flicker
+ */
+ rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x04 | (1 << 5));
+ rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
+
+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
+ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
+ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
+
+ rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
+ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
+
+ if (jbt->resolution != JBT_RESOLUTION_QVGA) {
+ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
+ rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
+ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
+
+ rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
+ rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
+
+ rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
+ rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
+ rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
+ } else {
+ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
+ rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02);
+ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804);
+
+ rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01);
+ rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008);
+
+ rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a);
+ rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19);
+ rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a);
+ }
+
+ return rc ? -EIO : 0;
+}
+
+static int standby_to_sleep(struct jbt_info *jbt)
+{
+ int rc;
+
+ /* three times command zero */
+ rc = jbt_reg_write_nodata(jbt, 0x00);
+ mdelay(1);
+ rc |= jbt_reg_write_nodata(jbt, 0x00);
+ mdelay(1);
+ rc |= jbt_reg_write_nodata(jbt, 0x00);
+ mdelay(1);
+
+ /* deep standby out */
+ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x11);
+ mdelay(1);
+ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x28);
+
+ /* (re)initialize register set */
+ rc |= jbt_init_regs(jbt);
+
+ return rc ? -EIO : 0;
+}
+
+static int sleep_to_normal(struct jbt_info *jbt)
+{
+ int rc;
+
+ /* Make sure we are 120 ms after SLEEP_OUT */
+ if (time_before(jiffies, jbt->last_sleep))
+ mdelay(jiffies_to_msecs(jbt->last_sleep - jiffies));
+
+ if (jbt->resolution == JBT_RESOLUTION_VGA) {
+ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
+
+ /* Quad mode off */
+ rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
+ } else {
+ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81);
+
+ /* Quad mode on */
+ rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22);
+ }
+
+ /* AVDD on, XVDD on */
+ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
+
+ /* Output control */
+ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9);
+
+ /* Turn on display */
+ rc |= jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
+
+ /* Sleep mode off */
+ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
+ jbt->last_sleep = jiffies + msecs_to_jiffies(120);
+
+ /* Allow the booster and display controller to restart stably */
+ mdelay(5);
+
+ return rc ? -EIO : 0;
+}
+
+static int normal_to_sleep(struct jbt_info *jbt)
+{
+ int rc;
+
+ /* Make sure we are 120 ms after SLEEP_OUT */
+ while (time_before(jiffies, jbt->last_sleep))
+ cpu_relax();
+
+ rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
+ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8000 | 1 << 3);
+ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
+ jbt->last_sleep = jiffies + msecs_to_jiffies(120);
+
+ /* Allow the internal circuits to stop automatically */
+ mdelay(5);
+
+ return rc ? -EIO : 0;
+}
+
+static int sleep_to_standby(struct jbt_info *jbt)
+{
+ return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
+}
+
+int jbt6k74_enter_power_mode(struct jbt_info *jbt, enum jbt_power_mode new_mode)
+{
+ struct jbt6k74_platform_data *pdata = jbt->spi_dev->dev.platform_data;
+ int rc = -EINVAL;
+
+ dev_dbg(&jbt->spi_dev->dev, "entering (old_state=%s, new_state=%s)\n",
+ jbt_power_mode_names[jbt->power_mode],
+ jbt_power_mode_names[new_mode]);
+
+ mutex_lock(&jbt->lock);
+
+ if (jbt->suspended) {
+ switch (new_mode) {
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ case JBT_POWER_MODE_SLEEP:
+ case JBT_POWER_MODE_NORMAL:
+ rc = 0;
+ jbt->suspend_mode = new_mode;
+ break;
+ default:
+ break;
+ }
+ } else if (new_mode == JBT_POWER_MODE_NORMAL &&
+ pdata->enable_pixel_clock) {
+ pdata->enable_pixel_clock(&jbt->spi_dev->dev, 1);
+ }
+
+ switch (jbt->power_mode) {
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ switch (new_mode) {
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ rc = 0;
+ break;
+ case JBT_POWER_MODE_SLEEP:
+ rc = standby_to_sleep(jbt);
+ break;
+ case JBT_POWER_MODE_NORMAL:
+ /* first transition into sleep */
+ rc = standby_to_sleep(jbt);
+ /* then transition into normal */
+ rc |= sleep_to_normal(jbt);
+ break;
+ }
+ break;
+ case JBT_POWER_MODE_SLEEP:
+ switch (new_mode) {
+ case JBT_POWER_MODE_SLEEP:
+ rc = 0;
+ break;
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ rc = sleep_to_standby(jbt);
+ break;
+ case JBT_POWER_MODE_NORMAL:
+ rc = sleep_to_normal(jbt);
+ break;
+ }
+ break;
+ case JBT_POWER_MODE_NORMAL:
+ switch (new_mode) {
+ case JBT_POWER_MODE_NORMAL:
+ rc = 0;
+ break;
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ /* first transition into sleep */
+ rc = normal_to_sleep(jbt);
+ /* then transition into deep standby */
+ rc |= sleep_to_standby(jbt);
+ break;
+ case JBT_POWER_MODE_SLEEP:
+ rc = normal_to_sleep(jbt);
+ break;
+ }
+ }
+
+ if (rc == 0) {
+ jbt->power_mode = new_mode;
+ if (new_mode != JBT_POWER_MODE_NORMAL &&
+ pdata->enable_pixel_clock)
+ pdata->enable_pixel_clock(&jbt->spi_dev->dev, 0);
+ } else {
+ dev_err(&jbt->spi_dev->dev, "Failed enter state '%s')\n",
+ jbt_power_mode_names[new_mode]);
+ }
+
+ mutex_unlock(&jbt->lock);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(jbt6k74_enter_power_mode);
+
+int jbt6k74_set_resolution(struct jbt_info *jbt, enum jbt_resolution new_resolution) {
+ int rc = 0;
+ enum jbt_resolution old_resolution;
+
+ if (new_resolution != JBT_RESOLUTION_VGA &&
+ new_resolution != JBT_RESOLUTION_QVGA)
+ return -EINVAL;
+
+ mutex_lock(&jbt->lock);
+
+ if (jbt->resolution == new_resolution)
+ goto out_unlock;
+
+ old_resolution = jbt->resolution;
+ jbt->resolution = new_resolution;
+
+ if (jbt->power_mode == JBT_POWER_MODE_NORMAL) {
+
+ /* first transition into sleep */
+ rc = normal_to_sleep(jbt);
+ /* second transition into deep standby */
+/* rc |= sleep_to_standby(jbt);*/
+ /* third transition into sleep */
+/* rc |= standby_to_sleep(jbt);*/
+ /* fourth transition into normal */
+ rc |= sleep_to_normal(jbt);
+
+ if (rc) {
+ jbt->resolution = old_resolution;
+ dev_err(&jbt->spi_dev->dev, "Failed to set resolution '%s')\n",
+ jbt_resolution_names[new_resolution]);
+ }
+ }
+
+out_unlock:
+ mutex_unlock(&jbt->lock);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(jbt6k74_set_resolution);
+
+static ssize_t resolution_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+
+ if (jbt->resolution >= ARRAY_SIZE(jbt_resolution_names))
+ return -EIO;
+
+ return sprintf(buf, "%s\n", jbt_resolution_names[jbt->resolution]);
+}
+
+static ssize_t resolution_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+ int i, rc;
+
+ for (i = 0; i < ARRAY_SIZE(jbt_resolution_names); i++) {
+ if (!strncmp(buf, jbt_resolution_names[i],
+ strlen(jbt_resolution_names[i]))) {
+ rc = jbt6k74_set_resolution(jbt, i);
+ if (rc)
+ return rc;
+ return count;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(resolution, 0644, resolution_read, resolution_write);
+
+static int reg_by_string(const char *name)
+{
+ if (!strcmp(name, "gamma_fine1"))
+ return JBT_REG_GAMMA1_FINE_1;
+ else if (!strcmp(name, "gamma_fine2"))
+ return JBT_REG_GAMMA1_FINE_2;
+ else if (!strcmp(name, "gamma_inclination"))
+ return JBT_REG_GAMMA1_INCLINATION;
+ else
+ return JBT_REG_GAMMA1_BLUE_OFFSET;
+}
+
+static ssize_t gamma_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+ int reg = reg_by_string(attr->attr.name);
+ u16 val;
+
+ mutex_lock(&jbt->lock);
+ val = jbt->reg_cache[reg];
+ mutex_unlock(&jbt->lock);
+
+ return sprintf(buf, "0x%04x\n", val);
+}
+
+static ssize_t gamma_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+ int reg = reg_by_string(attr->attr.name);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ dev_info(dev, "writing gama %lu\n", val & 0xff);
+
+ mutex_lock(&jbt->lock);
+ jbt_reg_write(jbt, reg, val & 0xff);
+ mutex_unlock(&jbt->lock);
+
+ return count;
+}
+
+static ssize_t reset_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rc;
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+ struct jbt6k74_platform_data *pdata = jbt->spi_dev->dev.platform_data;
+
+ dev_info(dev, "reset\n");
+
+ mutex_lock(&jbt->lock);
+
+ /* hard reset the jbt6k74 */
+ (pdata->reset)(0, 0);
+ mdelay(1);
+ (pdata->reset)(0, 1);
+ mdelay(120);
+
+ rc = jbt_reg_write_nodata(jbt, 0x01);
+ if (rc < 0)
+ dev_err(&jbt->spi_dev->dev, "cannot soft reset\n");
+ mdelay(120);
+
+ mutex_unlock(&jbt->lock);
+
+ jbt6k74_enter_power_mode(jbt, jbt->power_mode);
+
+ return count;
+}
+
+static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(reset, 0600, NULL, reset_write);
+
+static struct attribute *jbt_sysfs_entries[] = {
+ &dev_attr_resolution.attr,
+ &dev_attr_gamma_fine1.attr,
+ &dev_attr_gamma_fine2.attr,
+ &dev_attr_gamma_inclination.attr,
+ &dev_attr_gamma_blue_offset.attr,
+ &dev_attr_reset.attr,
+ NULL,
+};
+
+static struct attribute_group jbt_attr_group = {
+ .name = NULL,
+ .attrs = jbt_sysfs_entries,
+};
+
+/* FIXME: This in an ugly hack to delay display blanking.
+ When the jbt is in sleep mode it displays an all white screen and thus one
+ will a see a short flash.
+ By delaying the blanking we will give the backlight a chance to turn off and
+ thus avoid getting the flash */
+static void jbt_blank_worker(struct work_struct *work) {
+ struct jbt_info *jbt = container_of(work, struct jbt_info,
+ blank_work.work);
+
+ switch (jbt->blank_mode) {
+ case FB_BLANK_NORMAL:
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP);
+ break;
+ case FB_BLANK_POWERDOWN:
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
+ break;
+ default:
+ break;
+ }
+}
+
+static int jbt6k74_set_mode(struct lcd_device *ld, struct fb_videomode *m) {
+ int rc = -EINVAL;
+ struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+ if (m->xres == 240 && m->yres == 320) {
+ rc = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_QVGA);
+ } else if (m->xres == 480 && m->yres == 640) {
+ rc = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_VGA);
+ } else {
+ dev_err(&jbt->spi_dev->dev, "Unknown resolution. Entering sleep mode.\n");
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP);
+ }
+
+ return rc;
+}
+
+static int jbt6k74_set_power(struct lcd_device *ld, int power) {
+ int rc = -EINVAL;
+ struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+ jbt->blank_mode = power;
+ cancel_rearming_delayed_work(&jbt->blank_work);
+
+ switch (power) {
+ case FB_BLANK_UNBLANK:
+ dev_dbg(&jbt->spi_dev->dev, "unblank\n");
+ rc = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+ break;
+ case FB_BLANK_NORMAL:
+ dev_dbg(&jbt->spi_dev->dev, "blank\n");
+ rc = schedule_delayed_work(&jbt->blank_work, HZ);
+ break;
+ case FB_BLANK_POWERDOWN:
+ dev_dbg(&jbt->spi_dev->dev, "powerdown\n");
+ rc = schedule_delayed_work(&jbt->blank_work, HZ);
+ break;
+ default:
+ break;
+ }
+
+ return rc;
+}
+
+static int jbt6k74_get_power(struct lcd_device *ld) {
+ struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+ switch (jbt->power_mode) {
+ case JBT_POWER_MODE_NORMAL:
+ return FB_BLANK_UNBLANK;
+ case JBT_POWER_MODE_SLEEP:
+ return FB_BLANK_NORMAL;
+ default:
+ return JBT_POWER_MODE_DEEP_STANDBY;
+ }
+}
+
+struct lcd_ops jbt6k74_lcd_ops = {
+ .set_power = jbt6k74_set_power,
+ .get_power = jbt6k74_get_power,
+ .set_mode = jbt6k74_set_mode,
+};
+
+/* linux device model infrastructure */
+
+static int __devinit jbt_probe(struct spi_device *spi)
+{
+ int rc;
+ struct jbt_info *jbt;
+ struct jbt6k74_platform_data *pdata = spi->dev.platform_data;
+
+ /* the controller doesn't have a MISO pin; we can't do detection */
+
+ spi->mode = SPI_CPOL | SPI_CPHA;
+ spi->bits_per_word = 9;
+
+ rc = spi_setup(spi);
+ if (rc < 0) {
+ dev_err(&spi->dev,
+ "error during spi_setup of jbt6k74 driver\n");
+ return rc;
+ }
+
+ jbt = kzalloc(sizeof(*jbt), GFP_KERNEL);
+ if (!jbt)
+ return -ENOMEM;
+
+ jbt->spi_dev = spi;
+
+ jbt->lcd_dev = lcd_device_register("jbt6k74-lcd", &spi->dev,
+ jbt, &jbt6k74_lcd_ops);
+
+ if (IS_ERR(jbt->lcd_dev)) {
+ rc = PTR_ERR(jbt->lcd_dev);
+ goto err_free_drvdata;
+ }
+
+ INIT_DELAYED_WORK(&jbt->blank_work, jbt_blank_worker);
+
+ jbt->resolution = JBT_RESOLUTION_VGA;
+ jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY;
+ jbt->last_sleep = jiffies + msecs_to_jiffies(120);
+ mutex_init(&jbt->lock);
+
+ dev_set_drvdata(&spi->dev, jbt);
+
+ rc = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+ if (rc < 0) {
+ dev_err(&spi->dev, "cannot enter NORMAL state\n");
+ goto err_unregister_lcd;
+ }
+
+ rc = sysfs_create_group(&spi->dev.kobj, &jbt_attr_group);
+ if (rc < 0) {
+ dev_err(&spi->dev, "cannot create sysfs group\n");
+ goto err_standby;
+ }
+
+ if (pdata->probe_completed)
+ (pdata->probe_completed)(&spi->dev);
+
+ return 0;
+
+err_standby:
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
+err_unregister_lcd:
+ lcd_device_unregister(jbt->lcd_dev);
+err_free_drvdata:
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(jbt);
+
+ return rc;
+}
+
+static int __devexit jbt_remove(struct spi_device *spi)
+{
+ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+ /* We don't want to switch off the display in case the user
+ * accidentially unloads the module (whose use count normally is 0) */
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+
+ sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
+ dev_set_drvdata(&spi->dev, NULL);
+
+ lcd_device_unregister(jbt->lcd_dev);
+
+ kfree(jbt);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int jbt_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+ jbt->suspend_mode = jbt->power_mode;
+
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
+ jbt->suspended = 1;
+
+ dev_info(&spi->dev, "suspended\n");
+
+ return 0;
+}
+
+int jbt6k74_resume(struct spi_device *spi)
+{
+ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+ jbt->suspended = 0;
+ jbt6k74_enter_power_mode(jbt, jbt->suspend_mode);
+
+ dev_info(&spi->dev, "resumed\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(jbt6k74_resume);
+
+#else
+#define jbt_suspend NULL
+#define jbt6k74_resume NULL
+#endif
+
+static struct spi_driver jbt6k74_driver = {
+ .driver = {
+ .name = "jbt6k74",
+ .owner = THIS_MODULE,
+ },
+
+ .probe = jbt_probe,
+ .remove = __devexit_p(jbt_remove),
+ .suspend = jbt_suspend,
+ .resume = jbt6k74_resume,
+};
+
+static int __init jbt_init(void)
+{
+ return spi_register_driver(&jbt6k74_driver);
+}
+
+static void __exit jbt_exit(void)
+{
+ spi_unregister_driver(&jbt6k74_driver);
+}
+
+MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
+
+module_init(jbt_init);
+module_exit(jbt_exit);
--- /dev/null
+#ifndef __BQ27000_BATTERY_H__
+#define __BQ27000_BATTERY_H__
+
+void bq27000_charging_state_change(struct platform_device *pdev);
+
+struct bq27000_platform_data {
+ const char *name;
+ int rsense_mohms;
+ int (*hdq_read)(int);
+ int (*hdq_write)(int, u8);
+ int (*hdq_initialized)(void);
+ int (*get_charger_online_status)(void);
+ int (*get_charger_active_status)(void);
+};
+
+#endif
--- /dev/null
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/fb.h>
+
+#ifdef __KERNEL__
+
+struct glamo_core;
+struct glamofb_handle;
+
+struct glamo_fb_platform_data {
+ int width, height;
+
+ int num_modes;
+ struct fb_videomode *modes;
+
+ struct glamo_core *core;
+};
+
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#ifdef CONFIG_MFD_GLAMO
+void glamo_lcm_reset(struct platform_device *pdev, int level);
+#else
+#define glamo_lcm_reset(...) do {} while (0)
+#endif
+
+#endif
+
+#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
+#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
+#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
+
+#endif
--- /dev/null
+struct gta02_vib_platform_data {
+ int (* enable_fiq)(void);
+ void (*disable_fiq)(void);
+ void (*kick_fiq)(void);
+};
--- /dev/null
+#ifndef __GTA02HDQ_H__
+#define __GTA02HDQ_H__
+
+/* platform data */
+
+struct gta02_hdq_platform_data {
+ /*
+ * give an opportunity to use us as parent for
+ * devices that depend on us
+ */
+ void (*attach_child_devices)(struct device *parent_device);
+};
+
+int gta02hdq_read(int address);
+int gta02hdq_write(int address, u8 data);
+int gta02hdq_initialized(void);
+
+#endif
--- /dev/null
+#ifndef __LINUX_HDQ_H__
+#define __LINUX_HDQ_H__
+
+#include <linux/device.h>
+
+#define HDQ_SAMPLE_PERIOD_US 10
+
+/* platform data */
+
+struct hdq_platform_data {
+ /*
+ * give an opportunity to use us as parent for
+ * devices that depend on us
+ */
+ void (*attach_child_devices)(struct device *parent_device);
+
+ void (*gpio_dir_out)(void);
+ void (*gpio_dir_in)(void);
+ void (*gpio_set)(int);
+ int (*gpio_get)(void);
+
+ int (*enable_fiq)(void);
+ void (*disable_fiq)(void);
+ void (*kick_fiq)(void);
+
+};
+
+int hdq_read(int address);
+int hdq_write(int address, u8 data);
+int hdq_initialized(void);
+
+#endif
--- /dev/null
+#ifndef __JBT6K74_H__
+#define __JBT6K74_H__
+
+#include <linux/spi/spi.h>
+
+struct jbt6k74_platform_data {
+ void (*reset)(int devindex, int level);
+ void (*probe_completed)(struct device *dev);
+ void (*enable_pixel_clock)(struct device *dev, int enable);
+};
+
+#endif
--- /dev/null
+#ifndef _LINUX_LIS302DL_H
+#define _LINUX_LIS302DL_H
+
+#include <linux/types.h>
+#include <linux/spi/spi.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+struct lis302dl_info;
+
+struct lis302dl_platform_data {
+ char *name;
+ unsigned long pin_chip_select;
+ unsigned long pin_clk;
+ unsigned long pin_mosi;
+ unsigned long pin_miso;
+ int open_drain;
+ int interrupt;
+ void (*lis302dl_suspend_io)(struct lis302dl_info *, int resuming);
+};
+
+struct lis302dl_info {
+ struct lis302dl_platform_data *pdata;
+ struct device *dev;
+ struct input_dev *input_dev;
+ unsigned int flags;
+ unsigned int threshold;
+ unsigned int duration;
+ uint32_t overruns;
+ struct {
+ unsigned int threshold; /* mg */
+ unsigned int duration; /* ms */
+ } wakeup;
+
+ struct spi_device *spi;
+ uint8_t regs[0x40];
+};
+
+enum lis302dl_reg {
+ LIS302DL_REG_WHO_AM_I = 0x0f,
+ LIS302DL_REG_CTRL1 = 0x20,
+ LIS302DL_REG_CTRL2 = 0x21,
+ LIS302DL_REG_CTRL3 = 0x22,
+ LIS302DL_REG_HP_FILTER_RESET = 0x23,
+ LIS302DL_REG_STATUS = 0x27,
+ LIS302DL_REG_OUT_X = 0x29,
+ LIS302DL_REG_OUT_Y = 0x2b,
+ LIS302DL_REG_OUT_Z = 0x2d,
+ LIS302DL_REG_FF_WU_CFG_1 = 0x30,
+ LIS302DL_REG_FF_WU_SRC_1 = 0x31,
+ LIS302DL_REG_FF_WU_THS_1 = 0x32,
+ LIS302DL_REG_FF_WU_DURATION_1 = 0x33,
+ LIS302DL_REG_FF_WU_CFG_2 = 0x34,
+ LIS302DL_REG_FF_WU_SRC_2 = 0x35,
+ LIS302DL_REG_FF_WU_THS_2 = 0x36,
+ LIS302DL_REG_FF_WU_DURATION_2 = 0x37,
+ LIS302DL_REG_CLICK_CFG = 0x38,
+ LIS302DL_REG_CLICK_SRC = 0x39,
+ LIS302DL_REG_CLICK_THSY_X = 0x3b,
+ LIS302DL_REG_CLICK_THSZ = 0x3c,
+ LIS302DL_REG_CLICK_TIME_LIMIT = 0x3d,
+ LIS302DL_REG_CLICK_LATENCY = 0x3e,
+ LIS302DL_REG_CLICK_WINDOW = 0x3f,
+};
+
+enum lis302dl_reg_ctrl1 {
+ LIS302DL_CTRL1_Xen = 0x01,
+ LIS302DL_CTRL1_Yen = 0x02,
+ LIS302DL_CTRL1_Zen = 0x04,
+ LIS302DL_CTRL1_STM = 0x08,
+ LIS302DL_CTRL1_STP = 0x10,
+ LIS302DL_CTRL1_FS = 0x20,
+ LIS302DL_CTRL1_PD = 0x40,
+ LIS302DL_CTRL1_DR = 0x80,
+};
+
+enum lis302dl_reg_ctrl2 {
+ LIS302DL_CTRL2_HPC1 = 0x01,
+ LIS302DL_CTRL2_HPC2 = 0x02,
+ LIS302DL_CTRL2_HPFF1 = 0x04,
+ LIS302DL_CTRL2_HPFF2 = 0x08,
+ LIS302DL_CTRL2_FDS = 0x10,
+ LIS302DL_CTRL2_BOOT = 0x40,
+ LIS302DL_CTRL2_SIM = 0x80,
+};
+enum lis302dl_reg_ctrl3 {
+ LIS302DL_CTRL3_PP_OD = 0x40,
+ LIS302DL_CTRL3_IHL = 0x80,
+};
+
+enum lis302dl_reg_status {
+ LIS302DL_STATUS_XDA = 0x01,
+ LIS302DL_STATUS_YDA = 0x02,
+ LIS302DL_STATUS_ZDA = 0x04,
+ LIS302DL_STATUS_XYZDA = 0x08,
+ LIS302DL_STATUS_XOR = 0x10,
+ LIS302DL_STATUS_YOR = 0x20,
+ LIS302DL_STATUS_ZOR = 0x40,
+ LIS302DL_STATUS_XYZOR = 0x80,
+};
+
+/* Wakeup/freefall interrupt defs */
+enum lis302dl_reg_ffwucfg {
+ LIS302DL_FFWUCFG_XLIE = 0x01,
+ LIS302DL_FFWUCFG_XHIE = 0x02,
+ LIS302DL_FFWUCFG_YLIE = 0x04,
+ LIS302DL_FFWUCFG_YHIE = 0x08,
+ LIS302DL_FFWUCFG_ZLIE = 0x10,
+ LIS302DL_FFWUCFG_ZHIE = 0x20,
+ LIS302DL_FFWUCFG_LIR = 0x40,
+ LIS302DL_FFWUCFG_AOI = 0x80,
+};
+
+enum lis302dl_reg_ffwuths {
+ LIS302DL_FFWUTHS_DCRM = 0x80,
+};
+
+enum lis302dl_reg_ffwusrc {
+ LIS302DL_FFWUSRC_XL = 0x01,
+ LIS302DL_FFWUSRC_XH = 0x02,
+ LIS302DL_FFWUSRC_YL = 0x04,
+ LIS302DL_FFWUSRC_YH = 0x08,
+ LIS302DL_FFWUSRC_ZL = 0x10,
+ LIS302DL_FFWUSRC_ZH = 0x20,
+ LIS302DL_FFWUSRC_IA = 0x40,
+};
+
+enum lis302dl_reg_cloik_src {
+ LIS302DL_CLICKSRC_SINGLE_X = 0x01,
+ LIS302DL_CLICKSRC_DOUBLE_X = 0x02,
+ LIS302DL_CLICKSRC_SINGLE_Y = 0x04,
+ LIS302DL_CLICKSRC_DOUBLE_Y = 0x08,
+ LIS302DL_CLICKSRC_SINGLE_Z = 0x10,
+ LIS302DL_CLICKSRC_DOUBLE_Z = 0x20,
+ LIS302DL_CLICKSRC_IA = 0x40,
+};
+
+#define LIS302DL_WHO_AM_I_MAGIC 0x3b
+
+#define LIS302DL_F_WUP_FF_1 0x0001 /* wake up from free fall */
+#define LIS302DL_F_WUP_FF_2 0x0002
+#define LIS302DL_F_WUP_FF 0x0003
+#define LIS302DL_F_WUP_CLICK 0x0004
+#define LIS302DL_F_POWER 0x0010
+#define LIS302DL_F_FS 0x0020 /* ADC full scale */
+#define LIS302DL_F_INPUT_OPEN 0x0040 /* Set if input device is opened */
+#define LIS302DL_F_IRQ_WAKE 0x0080 /* IRQ is setup in wake mode */
+#define LIS302DL_F_DR 0x0100 /* Data rate, 400Hz/100Hz */
+
+#endif /* _LINUX_LIS302DL_H */
+
--- /dev/null
+#ifndef __GLAMO_MFD_H
+#define __GLAMO_MFD_H
+
+struct glamo_core;
+struct glamo_spigpio_platform_data;
+struct glamo_fb_platform_data;
+
+struct glamo_mmc_platform_data {
+ int (*glamo_mmc_use_slow)(void);
+
+ struct glamo_core *core;
+};
+
+struct glamo_platform_data {
+ struct glamo_fb_platform_data *fb_data;
+ struct glamo_spigpio_platform_data *spigpio_data;
+ struct glamo_mmc_platform_data *mmc_data;
+ int gpio_base;
+
+ unsigned int osci_clock_rate;
+
+ int (*glamo_irq_is_wired)(void);
+ void (*glamo_external_reset)(int);
+ void (*registered)(struct device *dev);
+};
+
+enum glamo_engine {
+ GLAMO_ENGINE_CAPTURE = 0,
+ GLAMO_ENGINE_ISP = 1,
+ GLAMO_ENGINE_JPEG = 2,
+ GLAMO_ENGINE_MPEG_ENC = 3,
+ GLAMO_ENGINE_MPEG_DEC = 4,
+ GLAMO_ENGINE_LCD = 5,
+ GLAMO_ENGINE_CMDQ = 6,
+ GLAMO_ENGINE_2D = 7,
+ GLAMO_ENGINE_3D = 8,
+ GLAMO_ENGINE_MMC = 9,
+ GLAMO_ENGINE_MICROP0 = 10,
+ GLAMO_ENGINE_RISC = 11,
+ GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
+ GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
+#if 0
+ GLAMO_ENGINE_H264_DEC = 14,
+ GLAMO_ENGINE_RISC1 = 15,
+ GLAMO_ENGINE_SPI = 16,
+#endif
+ __NUM_GLAMO_ENGINES
+};
+
+
+#endif
--- /dev/null
+#ifndef __TS_FILTER_H__
+#define __TS_FILTER_H__
+
+/*
+ * Touchscreen filter.
+ *
+ * (c) 2008,2009 Andy Green <andy@openmoko.com>
+ */
+
+#include <linux/platform_device.h>
+
+#define MAX_TS_FILTER_COORDS 3 /* X, Y and Z (pressure). */
+
+struct ts_filter;
+struct ts_filter_configuration;
+
+/* Operations that a filter can perform. */
+
+struct ts_filter_api {
+ /* Create the filter - mandatory. */
+ struct ts_filter * (*create)(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *config,
+ int count_coords);
+ /* Destroy the filter - mandatory. */
+ void (*destroy)(struct ts_filter *filter);
+ /* Clear the filter - optional. */
+ void (*clear)(struct ts_filter *filter);
+
+
+ /*
+ * The next three API functions only make sense if all of them are
+ * set for a filter. If a filter has the next three methods then
+ * it can propagate coordinates in the chain.
+ */
+
+ /*
+ * Process the filter.
+ * It returns non-zero if the filter reaches an error.
+ */
+ int (*process)(struct ts_filter *filter, int *coords);
+ /*
+ * Is the filter ready to return a point?
+ * Please do not code side effects in this function.
+ */
+ int (*haspoint)(struct ts_filter *filter);
+ /*
+ * Get a point.
+ * Do not call unless the filter actually has a point to deliver.
+ */
+ void (*getpoint)(struct ts_filter *filter, int *coords);
+
+ /*
+ * Scale the points - optional.
+ * A filter could only scale coordinates.
+ */
+ void (*scale)(struct ts_filter *filter, int *coords);
+};
+
+/*
+ * Generic filter configuration. Actual configurations have this structure
+ * as a member.
+ */
+struct ts_filter_configuration {
+};
+
+struct ts_filter {
+ /* Operations for this filter. */
+ const struct ts_filter_api *api;
+ /* Number of coordinates to process. */
+ int count_coords;
+};
+
+#endif
--- /dev/null
+#ifndef __TS_FILTER_CHAIN_H__
+#define __TS_FILTER_CHAIN_H__
+
+/*
+ * Touchscreen filter chains.
+ *
+ * (c) 2008,2009 Andy Green <andy@openmoko.com>
+ */
+
+#include "ts_filter.h"
+
+#include <linux/err.h>
+
+struct ts_filter_chain_configuration {
+ /* API to use. */
+ const struct ts_filter_api *api;
+ /* Generic filter configuration. Different for each filter. */
+ const struct ts_filter_configuration *config;
+};
+
+struct ts_filter_chain;
+
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+
+/*
+ * Create a filter chain. It will allocate an array of
+ * null-terminated pointers to filters. On error it will return
+ * an error you can check with IS_ERR.
+ */
+extern struct ts_filter_chain *ts_filter_chain_create(
+ struct platform_device *pdev,
+ const struct ts_filter_chain_configuration conf[],
+ int count_coords);
+
+/* Destroy the chain. */
+extern void ts_filter_chain_destroy(struct ts_filter_chain *c);
+
+/* Clear the filter chain. */
+extern void ts_filter_chain_clear(struct ts_filter_chain *c);
+
+/*
+ * Try to get one point. Returns 0 if no points are available.
+ * coords will be used as temporal space, thus you supply a point
+ * using coords but you shouldn't rely on its value on return unless
+ * it returns a nonzero value that is not -1.
+ * If one of the filters find an error then this function will
+ * return -1.
+ */
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords);
+
+#else /* !CONFIG_TOUCHSCREEN_FILTER */
+#define ts_filter_chain_create(pdev, config, count_coords) (NULL)
+#define ts_filter_chain_destroy(c) do { } while (0)
+#define ts_filter_chain_clear(c) do { } while (0)
+#define ts_filter_chain_feed(c, coords) (1)
+#endif
+
+#endif
--- /dev/null
+#ifndef __TS_FILTER_GROUP_H__
+#define __TS_FILTER_GROUP_H__
+
+#include "ts_filter.h"
+
+/*
+ * Touchscreen group filter.
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ */
+
+struct ts_filter_group_configuration {
+ /* Size of the filter. */
+ int length;
+ /*
+ * If two points are separated by this distance or less they
+ * are considered to be members of the same group.
+ */
+ int close_enough;
+ /* Minimum allowed size for the biggest group in the sample set. */
+ int threshold;
+ /*
+ * Number of times we try to get a group of points with at least
+ * threshold points.
+ */
+ int attempts;
+
+ /* Generic filter configuration. */
+ struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_group_api;
+
+#endif
--- /dev/null
+#ifndef __TS_FILTER_LINEAR_H__
+#define __TS_FILTER_LINEAR_H__
+
+#include "ts_filter.h"
+#include <linux/kobject.h>
+
+/*
+ * Touchscreen linear filter.
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ */
+
+#define TS_FILTER_LINEAR_NCONSTANTS 7
+
+struct ts_filter_linear_configuration {
+ /* Calibration constants. */
+ int constants[TS_FILTER_LINEAR_NCONSTANTS];
+ /* First coordinate. */
+ int coord0;
+ /* Second coordinate. */
+ int coord1;
+
+ /* Generic filter configuration. */
+ struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_linear_api;
+
+#endif
--- /dev/null
+#ifndef __TS_FILTER_MEAN_H__
+#define __TS_FILTER_MEAN_H__
+
+#include "ts_filter.h"
+
+/*
+ * Touchscreen filter.
+ *
+ * mean
+ *
+ * (c) 2008,2009
+ * Andy Green <andy@openmoko.com>
+ * Nelson Castillo <arhuaco@freaks-unidos.net>
+ */
+
+/* Configuration for this filter. */
+struct ts_filter_mean_configuration {
+ /* Number of points for the mean. */
+ int length;
+
+ /* Generic filter configuration. */
+ struct ts_filter_configuration config;
+};
+
+/* API functions for the mean filter */
+extern const struct ts_filter_api ts_filter_mean_api;
+
+#endif /* __TS_FILTER_MEAN_H__ */
--- /dev/null
+#ifndef __TS_FILTER_MEDIAN_H__
+#define __TS_FILTER_MEDIAN_H__
+
+#include "ts_filter.h"
+
+/*
+ * Touchscreen filter.
+ *
+ * median
+ *
+ * (c) 2008 Andy Green <andy@openmoko.com>
+ */
+
+struct ts_filter_median_configuration {
+ /* Size of the filter. */
+ int extent;
+ /* Precomputed midpoint. */
+ int midpoint;
+ /* A reference value for us to check if we are going fast or slow. */
+ int decimation_threshold;
+ /* How many points to replace if we're going fast. */
+ int decimation_above;
+ /* How many points to replace if we're going slow. */
+ int decimation_below;
+
+ /* Generic configuration. */
+ struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_median_api;
+
+#endif
--- /dev/null
+/*
+ * neo1973_gta02_wm8753.c -- SoC audio for Openmoko freerunner
+ *
+ * Copyright 2007 Openmoko Inc
+ * Author: Graeme Gregory <graeme@openmoko.org>
+ * Copyright 2007 Wolfson Microelectronics PLC.
+ * Author: Graeme Gregory <linux@wolfsonmicro.com>
+ * Copyright 2009 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/jack.h>
+
+#include <asm/mach-types.h>
+
+#include <plat/regs-iis.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/regs-gpioj.h>
+#include <mach/gta02.h>
+#include "../codecs/wm8753.h"
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+
+static struct snd_soc_card neo1973_gta02;
+static struct snd_soc_jack gta02_hs_jack;
+
+static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int pll_out = 0, bclk = 0;
+ int ret = 0;
+ unsigned long iis_clkrate;
+
+ iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+ switch (params_rate(params)) {
+ case 8000:
+ case 16000:
+ pll_out = 12288000;
+ break;
+ case 48000:
+ bclk = WM8753_BCLK_DIV_4;
+ pll_out = 12288000;
+ break;
+ case 96000:
+ bclk = WM8753_BCLK_DIV_2;
+ pll_out = 12288000;
+ break;
+ case 11025:
+ bclk = WM8753_BCLK_DIV_16;
+ pll_out = 11289600;
+ break;
+ case 22050:
+ bclk = WM8753_BCLK_DIV_8;
+ pll_out = 11289600;
+ break;
+ case 44100:
+ bclk = WM8753_BCLK_DIV_4;
+ pll_out = 11289600;
+ break;
+ case 88200:
+ bclk = WM8753_BCLK_DIV_2;
+ pll_out = 11289600;
+ break;
+ }
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0)
+ return ret;
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* set MCLK division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
+ S3C2410_IISMOD_32FS);
+ if (ret < 0)
+ return ret;
+
+ /* set codec BCLK division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(codec_dai,
+ WM8753_BCLKDIV, bclk);
+ if (ret < 0)
+ return ret;
+
+ /* set prescaler division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+ S3C24XX_PRESCALE(4, 4));
+ if (ret < 0)
+ return ret;
+
+ /* codec PLL input is PCLK/4 */
+ ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
+ iis_clkrate / 4, pll_out);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
+}
+
+/*
+ * Neo1973 WM8753 HiFi DAI opserations.
+ */
+static struct snd_soc_ops neo1973_gta02_hifi_ops = {
+ .hw_params = neo1973_gta02_hifi_hw_params,
+ .hw_free = neo1973_gta02_hifi_hw_free,
+};
+
+static int neo1973_gta02_voice_hw_params(
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ unsigned int pcmdiv = 0;
+ int ret = 0;
+ unsigned long iis_clkrate;
+
+ iis_clkrate = s3c24xx_i2s_get_clockrate();
+
+ if (params_rate(params) != 8000)
+ return -EINVAL;
+ if (params_channels(params) != 1)
+ return -EINVAL;
+
+ pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
+
+ /* todo: gg check mode (DSP_B) against CSR datasheet */
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
+ 12288000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ /* set codec PCM division for sample rate */
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
+ pcmdiv);
+ if (ret < 0)
+ return ret;
+
+ /* configue and enable PLL for 12.288MHz output */
+ ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
+ iis_clkrate / 4, 12288000);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+ /* disable the PLL */
+ return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
+}
+
+static struct snd_soc_ops neo1973_gta02_voice_ops = {
+ .hw_params = neo1973_gta02_voice_hw_params,
+ .hw_free = neo1973_gta02_voice_hw_free,
+};
+
+#define LM4853_AMP 1
+#define LM4853_SPK 2
+
+static u8 lm4853_state;
+
+/* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
+static int lm4853_set_state(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int val = ucontrol->value.integer.value[0];
+
+ if (val)
+ lm4853_state |= LM4853_AMP;
+ else
+ lm4853_state &= ~LM4853_AMP;
+
+ return 0;
+}
+
+static int lm4853_get_state(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
+
+ return 0;
+}
+
+static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int val = ucontrol->value.integer.value[0];
+
+ if (val) {
+ lm4853_state |= LM4853_SPK;
+ s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 0);
+ } else {
+ lm4853_state &= ~LM4853_SPK;
+ s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 1);
+ }
+
+ return 0;
+}
+
+static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
+
+ return 0;
+}
+
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k,
+ int event)
+{
+ if (SND_SOC_DAPM_EVENT_ON(event))
+ s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 0);
+
+ if (SND_SOC_DAPM_EVENT_OFF(event))
+ s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
+ SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
+ SND_SOC_DAPM_LINE("GSM Line Out", NULL),
+ SND_SOC_DAPM_LINE("GSM Line In", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_MIC("Handset Mic", NULL),
+ SND_SOC_DAPM_SPK("Handset Spk", NULL),
+};
+
+
+/* example machine audio_mapnections */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+ /* Connections to the lm4853 amp */
+ {"Stereo Out", NULL, "LOUT1"},
+ {"Stereo Out", NULL, "ROUT1"},
+
+ /* Connections to the GSM Module */
+ {"GSM Line Out", NULL, "MONO1"},
+ {"GSM Line Out", NULL, "MONO2"},
+ {"RXP", NULL, "GSM Line In"},
+ {"RXN", NULL, "GSM Line In"},
+
+ /* Connections to Headset */
+ {"MIC1", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Headset Mic"},
+
+ /* Call Mic */
+ {"MIC2", NULL, "Mic Bias"},
+ {"MIC2N", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Handset Mic"},
+
+ /* Call Speaker */
+ {"Handset Spk", NULL, "LOUT2"},
+ {"Handset Spk", NULL, "ROUT2"},
+
+ /* Connect the ALC pins */
+ {"ACIN", NULL, "ACOP"},
+};
+
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Stereo Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line In"),
+ SOC_DAPM_PIN_SWITCH("Headset Mic"),
+ SOC_DAPM_PIN_SWITCH("Handset Mic"),
+ SOC_DAPM_PIN_SWITCH("Handset Spk"),
+
+ /* This has no effect, it exists only to maintain compatibility with
+ * existing ALSA state files.
+ */
+ SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
+ lm4853_get_state,
+ lm4853_set_state),
+ SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
+ lm4853_get_spk,
+ lm4853_set_spk),
+};
+
+static struct snd_soc_jack_pin gta02_hs_jack_pins[] = {
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE
+ },
+ {
+ .pin = "Stereo Out",
+ .mask = SND_JACK_HEADPHONE,
+ .invert = 1,
+ },
+};
+
+static struct snd_soc_jack_gpio gta02_hs_jack_gpios[] = {
+ {
+ .gpio = GTA02_GPIO_JACK_INSERT,
+ .name = "headset-gpio",
+ .report = SND_JACK_HEADSET,
+ .debounce_time = 100,
+ },
+};
+
+/*
+ * This is an example machine initialisation for a wm8753 connected to a
+ * neo1973 GTA02.
+ */
+static int neo1973_gta02_wm8753_init(struct snd_soc_codec *codec)
+{
+ int err;
+
+ /* set up NC codec pins */
+ snd_soc_dapm_nc_pin(codec, "OUT3");
+ snd_soc_dapm_nc_pin(codec, "OUT4");
+ snd_soc_dapm_nc_pin(codec, "LINE1");
+ snd_soc_dapm_nc_pin(codec, "LINE2");
+
+ /* Add neo1973 gta02 specific widgets */
+ snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
+ ARRAY_SIZE(wm8753_dapm_widgets));
+
+ /* add neo1973 gta02 specific controls */
+ err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls,
+ ARRAY_SIZE(wm8753_neo1973_gta02_controls));
+
+ if (err < 0)
+ return err;
+
+ /* set up neo1973 gta02 specific audio path audio_map */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ /* set endpoints to default off mode */
+ snd_soc_dapm_disable_pin(codec, "Stereo Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line In");
+ snd_soc_dapm_disable_pin(codec, "Headset Mic");
+ snd_soc_dapm_disable_pin(codec, "Handset Mic");
+ snd_soc_dapm_disable_pin(codec, "Handset Spk");
+
+ snd_soc_dapm_sync(codec);
+
+ err = snd_soc_jack_new(&neo1973_gta02, "Headset Jack",
+ SND_JACK_HEADSET, >a02_hs_jack);
+ if (err) {
+ dev_err(codec->card->dev, "failed to alloc headset jack\n");
+ return err;
+ }
+
+ err = snd_soc_jack_add_pins(>a02_hs_jack, ARRAY_SIZE(gta02_hs_jack_pins),
+ gta02_hs_jack_pins);
+ if (err) {
+ dev_err(codec->card->dev, "failed to add headset jack pins\n");
+ return err;
+ }
+
+ err = snd_soc_jack_add_gpios(>a02_hs_jack, ARRAY_SIZE(gta02_hs_jack_gpios),
+ gta02_hs_jack_gpios);
+ if (err) {
+ dev_err(codec->card->dev, "failed to add headset jack gpios\n");
+ return err;
+ }
+
+
+ return 0;
+}
+
+/*
+ * BT Codec DAI
+ */
+static struct snd_soc_dai bt_dai = {
+ .name = "Bluetooth",
+ .id = 0,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 1,
+ .rates = SNDRV_PCM_RATE_8000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,},
+};
+
+static struct snd_soc_dai_link neo1973_gta02_dai[] = {
+{ /* Hifi Playback - for similatious use with voice below */
+ .name = "WM8753",
+ .stream_name = "WM8753 HiFi",
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .codec_dai = &wm8753_dai[WM8753_DAI_HIFI],
+ .init = neo1973_gta02_wm8753_init,
+ .ops = &neo1973_gta02_hifi_ops,
+},
+{ /* Voice via BT */
+ .name = "Bluetooth",
+ .stream_name = "Voice",
+ .cpu_dai = &bt_dai,
+ .codec_dai = &wm8753_dai[WM8753_DAI_VOICE],
+ .ops = &neo1973_gta02_voice_ops,
+},
+};
+
+static struct snd_soc_card neo1973_gta02 = {
+ .name = "neo1973-gta02",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = neo1973_gta02_dai,
+ .num_links = ARRAY_SIZE(neo1973_gta02_dai),
+};
+
+static struct snd_soc_device neo1973_gta02_snd_devdata = {
+ .card = &neo1973_gta02,
+ .codec_dev = &soc_codec_dev_wm8753,
+};
+
+static struct platform_device *neo1973_gta02_snd_device;
+
+
+static int __init neo1973_gta02_init(void)
+{
+ int ret;
+
+ if (!machine_is_neo1973_gta02()) {
+ printk(KERN_INFO
+ "Only GTA02 is supported by this ASoC driver\n");
+ return -ENODEV;
+ }
+
+ /* register bluetooth DAI here */
+ ret = snd_soc_register_dai(&bt_dai);
+ if (ret)
+ return ret;
+
+ neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!neo1973_gta02_snd_device) {
+ ret = -ENOMEM;
+ goto err_unregister_dai;
+ }
+
+ platform_set_drvdata(neo1973_gta02_snd_device,
+ &neo1973_gta02_snd_devdata);
+ neo1973_gta02_snd_devdata.dev = &neo1973_gta02_snd_device->dev;
+ ret = platform_device_add(neo1973_gta02_snd_device);
+
+ if (ret) {
+ platform_device_put(neo1973_gta02_snd_device);
+ goto err_unregister_dai;
+ }
+
+ /* Initialise GPIOs used by amp */
+ s3c2410_gpio_cfgpin(GTA02_GPIO_HP_IN, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(GTA02_GPIO_AMP_SHUT, S3C2410_GPIO_OUTPUT);
+
+ /* Amp off by default */
+ s3c2410_gpio_setpin(GTA02_GPIO_AMP_SHUT, 1);
+
+ /* Speaker off by default */
+ s3c2410_gpio_setpin(GTA02_GPIO_HP_IN, 1);
+
+
+ return 0;
+
+err_unregister_dai:
+ snd_soc_unregister_dai(&bt_dai);
+ return ret;
+}
+module_init(neo1973_gta02_init);
+
+static void __exit neo1973_gta02_exit(void)
+{
+ snd_soc_unregister_dai(&bt_dai);
+ snd_soc_jack_free_gpios(>a02_hs_jack, ARRAY_SIZE(gta02_hs_jack_gpios),
+ gta02_hs_jack_gpios);
+
+ platform_device_unregister(neo1973_gta02_snd_device);
+}
+module_exit(neo1973_gta02_exit);
+
+/* Module information */
+MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
+MODULE_LICENSE("GPL");
--- /dev/null
+diff --git a/arch/arm/plat-s3c/include/mach/cpu.h b/arch/arm/plat-s3c/include/mach/cpu.h
+new file mode 100644
+index 0000000..cd260b1
+--- /dev/null
++++ b/arch/arm/plat-s3c/include/mach/cpu.h
+@@ -0,0 +1,165 @@
++/*
++ * arch/arm/plat-s3c/include/mach/cpu.h
++ *
++ * S3C cpu type detection
++ *
++ * Copyright (C) 2008 Samsung Electronics
++ * Kyungmin Park <kyungmin.park@samsung.com>
++ *
++ * Derived from OMAP cpu.h
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#ifndef __ASM_ARCH_S3C_CPU_H
++#define __ASM_ARCH_S3C_CPU_H
++
++extern unsigned int system_rev;
++
++#define S3C_SYSTEM_REV_ATAG (system_rev & 0xffff)
++#define S3C_SYSTEM_REV_CPU (system_rev & 0xffff0000)
++
++/*
++ * cpu_is_s3c24xx(): True for s3c2400, s3c2410, s3c2440 and so on
++ * cpu_is_s3c241x(): True fro s3c2410, s3c2412
++ * cpu_is_s3c244x(): True fro s3c2440, s3c2442, s3c2443
++ * cpu_is_s3c64xx(): True for s3c6400, s3c6410
++ */
++#define GET_S3C_CLASS ((system_rev >> 24) & 0xff)
++
++#define IS_S3C_CLASS(class, id) \
++static inline int is_s3c ##class (void) \
++{ \
++ return (GET_S3C_CLASS == (id)) ? 1 : 0; \
++}
++
++#define GET_S3C_SUBCLASS ((system_rev >> 20) & 0xfff)
++
++#define IS_S3C_SUBCLASS(subclass, id) \
++static inline int is_s3c ##subclass (void) \
++{ \
++ return (GET_S3C_SUBCLASS == (id)) ? 1 : 0; \
++}
++
++IS_S3C_CLASS(24xx, 0x24)
++IS_S3C_CLASS(64xx, 0x64)
++
++IS_S3C_SUBCLASS(241x, 0x241)
++IS_S3C_SUBCLASS(244x, 0x244)
++
++#define cpu_is_s3c24xx() 0
++#define cpu_is_s3c241x() 0
++#define cpu_is_s3c244x() 0
++#define cpu_is_s3c64xx() 0
++
++#if defined(CONFIG_ARCH_S3C2410)
++# undef cpu_is_s3c24xx
++# undef cpu_is_s3c241x
++# undef cpu_is_s3c244x
++# define cpu_is_s3c24xx() is_s3c24xx()
++# define cpu_is_s3c241x() is_s3c241x()
++# define cpu_is_s3c244x() is_s3c244x()
++#endif
++
++#if defined(CONFIG_ARCH_S3C64XX)
++# undef cpu_is_s3c64xx
++# define cpu_is_s3c64xx() is_s3c64xx()
++#endif
++
++/*
++ * Macros to detect individual cpu types.
++ * cpu_is_s3c2410(): True for s3c2410
++ * cpu_is_s3c2440(): True for s3c2440
++ * cpu_is_s3c6400(): True for s3c6400
++ * cpu_is_s3c6410(): True for s3c6410
++ *
++ * Exception:
++ * Store Revision A to 1
++ * s3c2410a -> s3c2411
++ * s3c2440a -> s3c2441
++ */
++
++#define GET_S3C_TYPE ((system_rev >> 16) & 0xffff)
++
++#define IS_S3C_TYPE(type, id) \
++static inline int is_s3c ##type (void) \
++{ \
++ return (GET_S3C_TYPE == (id)) ? 1 : 0; \
++}
++
++IS_S3C_TYPE(2400, 0x2400)
++IS_S3C_TYPE(2410, 0x2410)
++IS_S3C_TYPE(2410a, 0x2411)
++IS_S3C_TYPE(2412, 0x2412)
++IS_S3C_TYPE(2440, 0x2440)
++IS_S3C_TYPE(2440a, 0x2441)
++IS_S3C_TYPE(2442, 0x2442)
++IS_S3C_TYPE(2443, 0x2443)
++IS_S3C_TYPE(6400, 0x6400)
++IS_S3C_TYPE(6410, 0x6410)
++
++#define cpu_is_s3c2400() 0
++#define cpu_is_s3c2410() 0
++#define cpu_is_s3c2410a() 0
++#define cpu_is_s3c2412() 0
++#define cpu_is_s3c2440() 0
++#define cpu_is_s3c2440a() 0
++#define cpu_is_s3c2442() 0
++#define cpu_is_s3c2443() 0
++#define cpu_is_s3c6400() 0
++#define cpu_is_s3c6410() 0
++
++#if defined(CONFIG_ARCH_S3C2410)
++# undef cpu_is_s3c2400
++# define cpu_is_s3c2400() is_s3c2400()
++#endif
++
++#if defined(CONFIG_CPU_S3C2410)
++# undef cpu_is_s3c2410
++# undef cpu_is_s3c2410a
++# define cpu_is_s3c2410() is_s3c2410()
++# define cpu_is_s3c2410a() is_s3c2410a()
++#endif
++
++#if defined(CONFIG_CPU_S3C2412)
++# undef cpu_is_s3c2412
++# define cpu_is_s3c2412() is_s3c2412()
++#endif
++
++#if defined(CONFIG_CPU_S3C2440)
++# undef cpu_is_s3c2440
++# undef cpu_is_s3c2440a
++# define cpu_is_s3c2440() is_s3c2440()
++# define cpu_is_s3c2440a() is_s3c2440a()
++#endif
++
++#if defined(CONFIG_CPU_S3C2442)
++# undef cpu_is_s3c2442
++# define cpu_is_s3c2442() is_s3c2442()
++#endif
++
++#if defined(CONFIG_CPU_S3C2443)
++# undef cpu_is_s3c2443
++# define cpu_is_s3c2443() is_s3c2443()
++#endif
++
++#if defined(CONFIG_ARCH_S3C64XX)
++# undef cpu_is_s3c6400
++# undef cpu_is_s3c6410
++# define cpu_is_s3c6400() is_s3c6400()
++# define cpu_is_s3c6410() is_s3c6410()
++#endif
++
++#endif
+diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-s3c/init.c
+index 6790edf..c1ddac1 100644
+--- a/arch/arm/plat-s3c/init.c
++++ b/arch/arm/plat-s3c/init.c
+@@ -31,6 +31,34 @@
+
+ static struct cpu_table *cpu;
+
++static void __init set_system_rev(unsigned int idcode)
++{
++ /*
++ * system_rev encoding is as follows
++ * system_rev & 0xff000000 -> S3C Class (24xx/64xx)
++ * system_rev & 0xfff00000 -> S3C Sub Class (241x/244x)
++ * system_rev & 0xffff0000 -> S3C Type (2410/2440/6400/6410)
++ *
++ * Remaining[15:0] are preserved from the value set by ATAG
++ *
++ * Exception:
++ * Store Revision A to 1 such as
++ * s3c2410A to s3c2411
++ * s3c2440A to s3c2441
++ */
++
++ system_rev &= 0xffff;
++ system_rev |= (idcode & 0x0ffff000) << 4;
++
++ if (idcode == 0x32410002 || idcode == 0x32440001)
++ system_rev |= (0x1 << 16);
++ if (idcode == 0x32440aaa /* s3c2442 */
++ || idcode == 0x32440aab) /* s3c2442b */
++ system_rev |= (0x2 << 16);
++ if (idcode == 0x0) /* s3c2400 */
++ system_rev |= (0x2400 << 16);
++}
++
+ static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
+ struct cpu_table *tab,
+ unsigned int count)
+@@ -53,6 +81,8 @@ void __init s3c_init_cpu(unsigned long idcode,
+ panic("Unknown S3C24XX CPU");
+ }
+
++ set_system_rev(idcode);
++
+ printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
+
+ if (cpu->map_io == NULL || cpu->init == NULL) {
+diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
+index 1932b7e..ed4c19f 100644
+--- a/arch/arm/plat-s3c24xx/cpu.c
++++ b/arch/arm/plat-s3c24xx/cpu.c
+@@ -61,6 +61,7 @@ static const char name_s3c2410[] = "S3C2410";
+ static const char name_s3c2412[] = "S3C2412";
+ static const char name_s3c2440[] = "S3C2440";
+ static const char name_s3c2442[] = "S3C2442";
++static const char name_s3c2442b[] = "S3C2442B";
+ static const char name_s3c2443[] = "S3C2443";
+ static const char name_s3c2410a[] = "S3C2410A";
+ static const char name_s3c2440a[] = "S3C2440A";
+@@ -112,6 +113,15 @@ static struct cpu_table cpu_ids[] __initdata = {
+ .name = name_s3c2442
+ },
+ {
++ .idcode = 0x32440aab,
++ .idmask = 0xffffffff,
++ .map_io = s3c244x_map_io,
++ .init_clocks = s3c244x_init_clocks,
++ .init_uarts = s3c244x_init_uarts,
++ .init = s3c2442_init,
++ .name = name_s3c2442b
++ },
++ {
+ .idcode = 0x32412001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2412_map_io,
+
--- /dev/null
+diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
+index 8d97db2..a7667d5 100644
+--- a/arch/arm/plat-s3c/pm.c
++++ b/arch/arm/plat-s3c/pm.c
+@@ -301,11 +301,14 @@ static int s3c_pm_enter(suspend_state_t state)
+
+ s3c_pm_arch_stop_clocks();
+
+- /* s3c_cpu_save will also act as our return point from when
+- * we resume as it saves its own register state and restores it
+- * during the resume. */
++ /* s3c2410_cpu_save will also act as our return point from when
++ * we resume as it saves its own register state, so use the return
++ * code to differentiate return from save and return from sleep */
+
+- s3c_cpu_save(regs_save);
++ if (s3c_cpu_save(regs_save) == 0) {
++ flush_cache_all();
++ pm_cpu_sleep();
++ }
+
+ /* restore the cpu state using the kernel's cpu init code. */
+
+diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
+index b7acf1a..925514e 100644
+--- a/arch/arm/plat-s3c24xx/irq-pm.c
++++ b/arch/arm/plat-s3c24xx/irq-pm.c
+@@ -15,6 +15,7 @@
+ #include <linux/module.h>
+ #include <linux/interrupt.h>
+ #include <linux/sysdev.h>
++#include <linux/irq.h>
+
+ #include <plat/cpu.h>
+ #include <plat/pm.h>
+@@ -80,7 +81,9 @@ int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+
+ int s3c24xx_irq_resume(struct sys_device *dev)
+ {
+- unsigned int i;
++ unsigned int i, irq;
++ unsigned long eintpnd;
++ struct irq_desc *desc;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+@@ -91,5 +94,25 @@ int s3c24xx_irq_resume(struct sys_device *dev)
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
++ /*
++ * ACK those interrupts which are now masked and pending.
++ * Level interrupts if not ACKed here, create an interrupt storm
++ * because they are not handled at all.
++ */
++
++ eintpnd = __raw_readl(S3C24XX_EINTPEND);
++
++ eintpnd &= save_eintmask;
++ eintpnd &= ~0xff; /* ignore lower irqs */
++
++ while (eintpnd) {
++ irq = __ffs(eintpnd);
++ eintpnd &= ~(1 << irq);
++
++ irq += (IRQ_EINT4 - 4);
++ desc = irq_to_desc(irq);
++ desc->chip->ack(irq);
++ }
++
+ return 0;
+ }
--- /dev/null
+From 4b35af38b03658e6031fdca45c98e488d6cf3f34 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:06:29 +0200
+Subject: [PATCH] 011-s3c-pwm.patch
+
+---
+ arch/arm/plat-s3c/Kconfig | 5 +
+ arch/arm/plat-s3c/Makefile | 1 +
+ arch/arm/plat-s3c/include/plat/pwm.h | 45 ++++
+ arch/arm/plat-s3c/pwm.c | 288 ++++++++++++++++++++++
+ arch/arm/plat-s3c24xx/pwm-clock.c | 437 ++++++++++++++++++++++++++++++++++
+ 5 files changed, 776 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/plat-s3c/include/plat/pwm.h
+ create mode 100644 arch/arm/plat-s3c/pwm.c
+ create mode 100644 arch/arm/plat-s3c24xx/pwm-clock.c
+
+diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
+index 935c755..bae4b95 100644
+--- a/arch/arm/plat-s3c/Kconfig
++++ b/arch/arm/plat-s3c/Kconfig
+@@ -166,6 +166,11 @@ config S3C_DMA
+ help
+ Internal configuration for S3C DMA core
+
++config S3C_PWM
++ bool
++ help
++ PWM timer code for the S3C2410, and similar processors
++
+ # device definitions to compile in
+
+ config S3C_DEV_HSMMC
+diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
+index f32f183..ab60855 100644
+--- a/arch/arm/plat-s3c/Makefile
++++ b/arch/arm/plat-s3c/Makefile
+@@ -38,3 +38,4 @@ obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o
+ obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
+ obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
+ obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
++obj-$(CONFIG_S3C_PWM) += pwm.o
+diff --git a/arch/arm/plat-s3c/include/plat/pwm.h b/arch/arm/plat-s3c/include/plat/pwm.h
+new file mode 100644
+index 0000000..6a41b0a
+--- /dev/null
++++ b/arch/arm/plat-s3c/include/plat/pwm.h
+@@ -0,0 +1,45 @@
++#ifndef __S3C2410_PWM_H
++#define __S3C2410_PWM_H
++
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++
++#include <mach/io.h>
++#include <mach/hardware.h>
++#include <asm/mach-types.h>
++#include <plat/regs-timer.h>
++
++enum pwm_timer {
++ PWM0,
++ PWM1,
++ PWM2,
++ PWM3,
++ PWM4
++};
++
++struct s3c2410_pwm {
++ enum pwm_timer timerid;
++ struct clk *pclk;
++ unsigned long pclk_rate;
++ unsigned long prescaler;
++ unsigned long divider;
++ unsigned long counter;
++ unsigned long comparer;
++};
++
++struct s3c24xx_pwm_platform_data{
++ /* callback to attach platform children (to enforce suspend / resume
++ * ordering */
++ void (*attach_child_devices)(struct device *parent_device);
++};
++
++int s3c2410_pwm_init(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_enable(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_disable(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_start(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_stop(struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *s3c2410_pwm);
++int s3c2410_pwm_dumpregs(void);
++
++#endif /* __S3C2410_PWM_H */
+diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
+new file mode 100644
+index 0000000..250bd2b
+--- /dev/null
++++ b/arch/arm/plat-s3c/pwm.c
+@@ -0,0 +1,288 @@
++/*
++ * arch/arm/plat-s3c/pwm.c
++ *
++ * Copyright (c) by Javi Roman <javiroman@kernel-labs.org>
++ * for the Openmoko Project.
++ *
++ * S3C2410A SoC PWM support
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/clk.h>
++#include <linux/device.h>
++#include <mach/hardware.h>
++#include <plat/regs-timer.h>
++#include <plat/pwm.h>
++#include <asm/io.h>
++
++#ifdef CONFIG_PM
++ static unsigned long standby_reg_tcon;
++ static unsigned long standby_reg_tcfg0;
++ static unsigned long standby_reg_tcfg1;
++#endif
++
++int s3c2410_pwm_disable(struct s3c2410_pwm *pwm)
++{
++ unsigned long tcon;
++
++ /* stop timer */
++ tcon = __raw_readl(S3C2410_TCON);
++ tcon &= 0xffffff00;
++ __raw_writel(tcon, S3C2410_TCON);
++
++ clk_disable(pwm->pclk);
++ clk_put(pwm->pclk);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_disable);
++
++int s3c2410_pwm_init(struct s3c2410_pwm *pwm)
++{
++ pwm->pclk = clk_get(NULL, "timers");
++ if (IS_ERR(pwm->pclk))
++ return PTR_ERR(pwm->pclk);
++
++ clk_enable(pwm->pclk);
++ pwm->pclk_rate = clk_get_rate(pwm->pclk);
++ return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_init);
++
++int s3c2410_pwm_enable(struct s3c2410_pwm *pwm)
++{
++ unsigned long tcfg0, tcfg1, tcnt, tcmp;
++
++ /* control registers bits */
++ tcfg1 = __raw_readl(S3C2410_TCFG1);
++ tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++ /* divider & scaler slection */
++ switch (pwm->timerid) {
++ case PWM0:
++ tcfg1 &= ~S3C2410_TCFG1_MUX0_MASK;
++ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
++ break;
++ case PWM1:
++ tcfg1 &= ~S3C2410_TCFG1_MUX1_MASK;
++ tcfg0 &= ~S3C2410_TCFG_PRESCALER0_MASK;
++ break;
++ case PWM2:
++ tcfg1 &= ~S3C2410_TCFG1_MUX2_MASK;
++ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++ break;
++ case PWM3:
++ tcfg1 &= ~S3C2410_TCFG1_MUX3_MASK;
++ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++ break;
++ case PWM4:
++ /* timer four is not capable of doing PWM */
++ break;
++ default:
++ clk_disable(pwm->pclk);
++ clk_put(pwm->pclk);
++ return -1;
++ }
++
++ /* divider & scaler values */
++ tcfg1 |= pwm->divider;
++ __raw_writel(tcfg1, S3C2410_TCFG1);
++
++ switch (pwm->timerid) {
++ case PWM0:
++ case PWM1:
++ tcfg0 |= pwm->prescaler;
++ __raw_writel(tcfg0, S3C2410_TCFG0);
++ break;
++ default:
++ if ((tcfg0 | pwm->prescaler) != tcfg0) {
++ printk(KERN_WARNING "not changing prescaler of PWM %u,"
++ " since it's shared with timer4 (clock tick)\n",
++ pwm->timerid);
++ }
++ break;
++ }
++
++ /* timer count and compare buffer initial values */
++ tcnt = pwm->counter;
++ tcmp = pwm->comparer;
++
++ __raw_writel(tcnt, S3C2410_TCNTB(pwm->timerid));
++ __raw_writel(tcmp, S3C2410_TCMPB(pwm->timerid));
++
++ /* ensure timer is stopped */
++ s3c2410_pwm_stop(pwm);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_enable);
++
++int s3c2410_pwm_start(struct s3c2410_pwm *pwm)
++{
++ unsigned long tcon;
++
++ tcon = __raw_readl(S3C2410_TCON);
++
++ switch (pwm->timerid) {
++ case PWM0:
++ tcon |= S3C2410_TCON_T0START;
++ tcon &= ~S3C2410_TCON_T0MANUALUPD;
++ break;
++ case PWM1:
++ tcon |= S3C2410_TCON_T1START;
++ tcon &= ~S3C2410_TCON_T1MANUALUPD;
++ break;
++ case PWM2:
++ tcon |= S3C2410_TCON_T2START;
++ tcon &= ~S3C2410_TCON_T2MANUALUPD;
++ break;
++ case PWM3:
++ tcon |= S3C2410_TCON_T3START;
++ tcon &= ~S3C2410_TCON_T3MANUALUPD;
++ break;
++ case PWM4:
++ /* timer four is not capable of doing PWM */
++ default:
++ return -ENODEV;
++ }
++
++ __raw_writel(tcon, S3C2410_TCON);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_start);
++
++int s3c2410_pwm_stop(struct s3c2410_pwm *pwm)
++{
++ unsigned long tcon;
++
++ tcon = __raw_readl(S3C2410_TCON);
++
++ switch (pwm->timerid) {
++ case PWM0:
++ tcon &= ~0x00000000;
++ tcon |= S3C2410_TCON_T0RELOAD;
++ tcon |= S3C2410_TCON_T0MANUALUPD;
++ break;
++ case PWM1:
++ tcon &= ~0x00000080;
++ tcon |= S3C2410_TCON_T1RELOAD;
++ tcon |= S3C2410_TCON_T1MANUALUPD;
++ break;
++ case PWM2:
++ tcon &= ~0x00000800;
++ tcon |= S3C2410_TCON_T2RELOAD;
++ tcon |= S3C2410_TCON_T2MANUALUPD;
++ break;
++ case PWM3:
++ tcon &= ~0x00008000;
++ tcon |= S3C2410_TCON_T3RELOAD;
++ tcon |= S3C2410_TCON_T3MANUALUPD;
++ break;
++ case PWM4:
++ /* timer four is not capable of doing PWM */
++ default:
++ return -ENODEV;
++ }
++
++ __raw_writel(tcon, S3C2410_TCON);
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_stop);
++
++int s3c2410_pwm_duty_cycle(int reg_value, struct s3c2410_pwm *pwm)
++{
++ __raw_writel(reg_value, S3C2410_TCMPB(pwm->timerid));
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_duty_cycle);
++
++int s3c2410_pwm_dumpregs(void)
++{
++ printk(KERN_INFO "TCON: %08lx, TCFG0: %08lx, TCFG1: %08lx\n",
++ (unsigned long) __raw_readl(S3C2410_TCON),
++ (unsigned long) __raw_readl(S3C2410_TCFG0),
++ (unsigned long) __raw_readl(S3C2410_TCFG1));
++
++ return 0;
++}
++EXPORT_SYMBOL_GPL(s3c2410_pwm_dumpregs);
++
++static int __init s3c24xx_pwm_probe(struct platform_device *pdev)
++{
++ struct s3c24xx_pwm_platform_data *pdata = pdev->dev.platform_data;
++
++ dev_info(&pdev->dev, "s3c24xx_pwm is registered \n");
++
++ /* if platform was interested, give him a chance to register
++ * platform devices that switch power with us as the parent
++ * at registration time -- ensures suspend / resume ordering
++ */
++ if (pdata)
++ if (pdata->attach_child_devices)
++ (pdata->attach_child_devices)(&pdev->dev);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int s3c24xx_pwm_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ /* PWM config should be kept in suspending */
++ standby_reg_tcon = __raw_readl(S3C2410_TCON);
++ standby_reg_tcfg0 = __raw_readl(S3C2410_TCFG0);
++ standby_reg_tcfg1 = __raw_readl(S3C2410_TCFG1);
++
++ return 0;
++}
++
++static int s3c24xx_pwm_resume(struct platform_device *pdev)
++{
++ __raw_writel(standby_reg_tcon, S3C2410_TCON);
++ __raw_writel(standby_reg_tcfg0, S3C2410_TCFG0);
++ __raw_writel(standby_reg_tcfg1, S3C2410_TCFG1);
++
++ return 0;
++}
++#else
++#define s3c24xx_pwm_suspend NULL
++#define s3c24xx_pwm_resume NULL
++#endif
++
++static struct platform_driver s3c24xx_pwm_driver = {
++ .driver = {
++ .name = "s3c24xx_pwm",
++ .owner = THIS_MODULE,
++ },
++ .probe = s3c24xx_pwm_probe,
++ .suspend = s3c24xx_pwm_suspend,
++ .resume = s3c24xx_pwm_resume,
++};
++
++static int __init s3c24xx_pwm_init(void)
++{
++ return platform_driver_register(&s3c24xx_pwm_driver);
++}
++
++static void __exit s3c24xx_pwm_exit(void)
++{
++}
++
++MODULE_AUTHOR("Javi Roman <javiroman@kernel-labs.org>");
++MODULE_LICENSE("GPL");
++
++module_init(s3c24xx_pwm_init);
++module_exit(s3c24xx_pwm_exit);
+diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
+new file mode 100644
+index 0000000..d41cccd
+--- /dev/null
++++ b/arch/arm/plat-s3c24xx/pwm-clock.c
+@@ -0,0 +1,437 @@
++/* linux/arch/arm/plat-s3c24xx/pwm-clock.c
++ *
++ * Copyright (c) 2007 Simtec Electronics
++ * Copyright (c) 2007, 2008 Ben Dooks
++ * Ben Dooks <ben-linux@fluff.org>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License.
++*/
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/list.h>
++#include <linux/errno.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/io.h>
++
++#include <mach/hardware.h>
++#include <asm/irq.h>
++
++#include <mach/regs-clock.h>
++#include <mach/regs-gpio.h>
++
++#include <asm/plat-s3c24xx/clock.h>
++#include <asm/plat-s3c24xx/cpu.h>
++
++#include <asm/plat-s3c/regs-timer.h>
++
++/* Each of the timers 0 through 5 go through the following
++ * clock tree, with the inputs depending on the timers.
++ *
++ * pclk ---- [ prescaler 0 ] -+---> timer 0
++ * +---> timer 1
++ *
++ * pclk ---- [ prescaler 1 ] -+---> timer 2
++ * +---> timer 3
++ * \---> timer 4
++ *
++ * Which are fed into the timers as so:
++ *
++ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
++ * [mux] -> timer 0
++ * tclk 0 ------------------------------/
++ *
++ * prescaled 0 ---- [ div 2,4,8,16 ] ---\
++ * [mux] -> timer 1
++ * tclk 0 ------------------------------/
++ *
++ *
++ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
++ * [mux] -> timer 2
++ * tclk 1 ------------------------------/
++ *
++ * prescaled 1 ---- [ div 2,4,8,16 ] ---\
++ * [mux] -> timer 3
++ * tclk 1 ------------------------------/
++ *
++ * prescaled 1 ---- [ div 2,4,8, 16 ] --\
++ * [mux] -> timer 4
++ * tclk 1 ------------------------------/
++ *
++ * Since the mux and the divider are tied together in the
++ * same register space, it is impossible to set the parent
++ * and the rate at the same time. To avoid this, we add an
++ * intermediate 'prescaled-and-divided' clock to select
++ * as the parent for the timer input clock called tdiv.
++ *
++ * prescaled clk --> pwm-tdiv ---\
++ * [ mux ] --> timer X
++ * tclk -------------------------/
++*/
++
++static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
++{
++ unsigned long tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++ if (clk->id == 1) {
++ tcfg0 &= S3C2410_TCFG_PRESCALER1_MASK;
++ tcfg0 >>= S3C2410_TCFG_PRESCALER1_SHIFT;
++ } else {
++ tcfg0 &= S3C2410_TCFG_PRESCALER0_MASK;
++ }
++
++ return clk_get_rate(clk->parent) / (tcfg0 + 1);
++}
++
++/* TODO - add set rate calls. */
++
++static struct clk clk_timer_scaler[] = {
++ [0] = {
++ .name = "pwm-scaler0",
++ .id = -1,
++ .get_rate = clk_pwm_scaler_getrate,
++ },
++ [1] = {
++ .name = "pwm-scaler1",
++ .id = -1,
++ .get_rate = clk_pwm_scaler_getrate,
++ },
++};
++
++static struct clk clk_timer_tclk[] = {
++ [0] = {
++ .name = "pwm-tclk0",
++ .id = -1,
++ },
++ [1] = {
++ .name = "pwm-tclk1",
++ .id = -1,
++ },
++};
++
++struct pwm_tdiv_clk {
++ struct clk clk;
++ unsigned int divisor;
++};
++
++static inline struct pwm_tdiv_clk *to_tdiv(struct clk *clk)
++{
++ return container_of(clk, struct pwm_tdiv_clk, clk);
++}
++
++static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
++{
++ return 1 << (1 + tcfg1);
++}
++
++static unsigned long clk_pwm_tdiv_get_rate(struct clk *clk)
++{
++ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++ unsigned int divisor;
++
++ tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
++ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++ if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
++ divisor = to_tdiv(clk)->divisor;
++ else
++ divisor = tcfg_to_divisor(tcfg1);
++
++ return clk_get_rate(clk->parent) / divisor;
++}
++
++static unsigned long clk_pwm_tdiv_round_rate(struct clk *clk,
++ unsigned long rate)
++{
++ unsigned long parent_rate;
++ unsigned long divisor;
++
++ parent_rate = clk_get_rate(clk->parent);
++ divisor = parent_rate / rate;
++
++ if (divisor <= 2)
++ divisor = 2;
++ else if (divisor <= 4)
++ divisor = 4;
++ else if (divisor <= 8)
++ divisor = 8;
++ else
++ divisor = 16;
++
++ return parent_rate / divisor;
++}
++
++static unsigned long clk_pwm_tdiv_bits(struct pwm_tdiv_clk *divclk)
++{
++ unsigned long bits;
++
++ switch (divclk->divisor) {
++ case 2:
++ bits = S3C2410_TCFG1_MUX_DIV2;
++ break;
++ case 4:
++ bits = S3C2410_TCFG1_MUX_DIV4;
++ break;
++ case 8:
++ bits = S3C2410_TCFG1_MUX_DIV8;
++ break;
++ case 16:
++ default:
++ bits = S3C2410_TCFG1_MUX_DIV16;
++ break;
++ }
++
++ return bits;
++}
++
++static void clk_pwm_tdiv_update(struct pwm_tdiv_clk *divclk)
++{
++ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++ unsigned long bits = clk_pwm_tdiv_bits(divclk);
++ unsigned long flags;
++ unsigned long shift = S3C2410_TCFG1_SHIFT(divclk->clk.id);
++
++ local_irq_save(flags);
++
++ tcfg1 = __raw_readl(S3C2410_TCFG1);
++ tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
++ tcfg1 |= bits << shift;
++ __raw_writel(tcfg1, S3C2410_TCFG1);
++
++ local_irq_restore(flags);
++}
++
++static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
++{
++ struct pwm_tdiv_clk *divclk = to_tdiv(clk);
++ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++ unsigned long parent_rate = clk_get_rate(clk->parent);
++ unsigned long divisor;
++
++ tcfg1 >>= S3C2410_TCFG1_SHIFT(clk->id);
++ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++ rate = clk_round_rate(clk, rate);
++ divisor = parent_rate / rate;
++
++ if (divisor > 16)
++ return -EINVAL;
++
++ divclk->divisor = divisor;
++
++ /* Update the current MUX settings if we are currently
++ * selected as the clock source for this clock. */
++
++ if (tcfg1 != S3C2410_TCFG1_MUX_TCLK)
++ clk_pwm_tdiv_update(divclk);
++
++ return 0;
++}
++
++static struct pwm_tdiv_clk clk_timer_tdiv[] = {
++ [0] = {
++ .clk = {
++ .name = "pwm-tdiv",
++ .parent = &clk_timer_scaler[0],
++ .get_rate = clk_pwm_tdiv_get_rate,
++ .set_rate = clk_pwm_tdiv_set_rate,
++ .round_rate = clk_pwm_tdiv_round_rate,
++ },
++ },
++ [1] = {
++ .clk = {
++ .name = "pwm-tdiv",
++ .parent = &clk_timer_scaler[0],
++ .get_rate = clk_pwm_tdiv_get_rate,
++ .set_rate = clk_pwm_tdiv_set_rate,
++ .round_rate = clk_pwm_tdiv_round_rate,
++ }
++ },
++ [2] = {
++ .clk = {
++ .name = "pwm-tdiv",
++ .parent = &clk_timer_scaler[1],
++ .get_rate = clk_pwm_tdiv_get_rate,
++ .set_rate = clk_pwm_tdiv_set_rate,
++ .round_rate = clk_pwm_tdiv_round_rate,
++ },
++ },
++ [3] = {
++ .clk = {
++ .name = "pwm-tdiv",
++ .parent = &clk_timer_scaler[1],
++ .get_rate = clk_pwm_tdiv_get_rate,
++ .set_rate = clk_pwm_tdiv_set_rate,
++ .round_rate = clk_pwm_tdiv_round_rate,
++ },
++ },
++ [4] = {
++ .clk = {
++ .name = "pwm-tdiv",
++ .parent = &clk_timer_scaler[1],
++ .get_rate = clk_pwm_tdiv_get_rate,
++ .set_rate = clk_pwm_tdiv_set_rate,
++ .round_rate = clk_pwm_tdiv_round_rate,
++ },
++ },
++};
++
++static int __init clk_pwm_tdiv_register(unsigned int id)
++{
++ struct pwm_tdiv_clk *divclk = &clk_timer_tdiv[id];
++ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++
++ tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
++ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++ divclk->clk.id = id;
++ divclk->divisor = tcfg_to_divisor(tcfg1);
++
++ return s3c24xx_register_clock(&divclk->clk);
++}
++
++static inline struct clk *s3c24xx_pwmclk_tclk(unsigned int id)
++{
++ return (id >= 2) ? &clk_timer_tclk[1] : &clk_timer_tclk[0];
++}
++
++static inline struct clk *s3c24xx_pwmclk_tdiv(unsigned int id)
++{
++ return &clk_timer_tdiv[id].clk;
++}
++
++static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent)
++{
++ unsigned int id = clk->id;
++ unsigned long tcfg1;
++ unsigned long flags;
++ unsigned long bits;
++ unsigned long shift = S3C2410_TCFG1_SHIFT(id);
++
++ if (parent == s3c24xx_pwmclk_tclk(id))
++ bits = S3C2410_TCFG1_MUX_TCLK << shift;
++ else if (parent == s3c24xx_pwmclk_tdiv(id))
++ bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift;
++ else
++ return -EINVAL;
++
++ clk->parent = parent;
++
++ local_irq_save(flags);
++
++ tcfg1 = __raw_readl(S3C2410_TCFG1);
++ tcfg1 &= ~(S3C2410_TCFG1_MUX_MASK << shift);
++ __raw_writel(tcfg1 | bits, S3C2410_TCFG1);
++
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++static struct clk clk_tin[] = {
++ [0] = {
++ .name = "pwm-tin",
++ .id = 0,
++ .set_parent = clk_pwm_tin_set_parent,
++ },
++ [1] = {
++ .name = "pwm-tin",
++ .id = 1,
++ .set_parent = clk_pwm_tin_set_parent,
++ },
++ [2] = {
++ .name = "pwm-tin",
++ .id = 2,
++ .set_parent = clk_pwm_tin_set_parent,
++ },
++ [3] = {
++ .name = "pwm-tin",
++ .id = 3,
++ .set_parent = clk_pwm_tin_set_parent,
++ },
++ [4] = {
++ .name = "pwm-tin",
++ .id = 4,
++ .set_parent = clk_pwm_tin_set_parent,
++ },
++};
++
++static __init int clk_pwm_tin_register(struct clk *pwm)
++{
++ unsigned long tcfg1 = __raw_readl(S3C2410_TCFG1);
++ unsigned int id = pwm->id;
++
++ struct clk *parent;
++ int ret;
++
++ ret = s3c24xx_register_clock(pwm);
++ if (ret < 0)
++ return ret;
++
++ tcfg1 >>= S3C2410_TCFG1_SHIFT(id);
++ tcfg1 &= S3C2410_TCFG1_MUX_MASK;
++
++ if (tcfg1 == S3C2410_TCFG1_MUX_TCLK)
++ parent = s3c24xx_pwmclk_tclk(id);
++ else
++ parent = s3c24xx_pwmclk_tdiv(id);
++
++ return clk_set_parent(pwm, parent);
++}
++
++static __init int s3c24xx_pwmclk_init(void)
++{
++ struct clk *clk_timers;
++ unsigned int clk;
++ int ret;
++
++ clk_timers = clk_get(NULL, "timers");
++ if (IS_ERR(clk_timers)) {
++ printk(KERN_ERR "%s: no parent clock\n", __func__);
++ return -EINVAL;
++ }
++
++ for (clk = 0; clk < ARRAY_SIZE(clk_timer_scaler); clk++) {
++ clk_timer_scaler[clk].parent = clk_timers;
++ ret = s3c24xx_register_clock(&clk_timer_scaler[clk]);
++ if (ret < 0) {
++ printk(KERN_ERR "error adding pwm scaler%d clock\n", clk);
++ goto err;
++ }
++ }
++
++ for (clk = 0; clk < ARRAY_SIZE(clk_timer_tclk); clk++) {
++ ret = s3c24xx_register_clock(&clk_timer_tclk[clk]);
++ if (ret < 0) {
++ printk(KERN_ERR "error adding pww tclk%d\n", clk);
++ goto err;
++ }
++ }
++
++ for (clk = 0; clk < ARRAY_SIZE(clk_timer_tdiv); clk++) {
++ ret = clk_pwm_tdiv_register(clk);
++ if (ret < 0) {
++ printk(KERN_ERR "error adding pwm%d tdiv clock\n", clk);
++ goto err;
++ }
++ }
++
++ for (clk = 0; clk < ARRAY_SIZE(clk_tin); clk++) {
++ ret = clk_pwm_tin_register(&clk_tin[clk]);
++ if (ret < 0) {
++ printk(KERN_ERR "error adding pwm%d tin clock\n", clk);
++ goto err;
++ }
++ }
++
++ return 0;
++
++ err:
++ return ret;
++}
++
++arch_initcall(s3c24xx_pwmclk_init);
+--
+1.5.6.5
+
--- /dev/null
+From f3f6575e69903475fc2015d6943f575c77d22550 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:08:11 +0200
+Subject: [PATCH] 013-fiq_c_handler.patch
+
+---
+ arch/arm/include/asm/fiq.h | 5 +-
+ arch/arm/kernel/fiq.c | 79 ++++++++++++++++++++++++++++++
+ arch/arm/plat-s3c24xx/include/plat/irq.h | 21 ++++++++
+ arch/arm/plat-s3c24xx/irq.c | 50 +++++++++++++++----
+ 4 files changed, 143 insertions(+), 12 deletions(-)
+
+diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
+index 2242ce2..7ade2b8 100644
+--- a/arch/arm/include/asm/fiq.h
++++ b/arch/arm/include/asm/fiq.h
+@@ -29,8 +29,9 @@ struct fiq_handler {
+ extern int claim_fiq(struct fiq_handler *f);
+ extern void release_fiq(struct fiq_handler *f);
+ extern void set_fiq_handler(void *start, unsigned int length);
+-extern void set_fiq_regs(struct pt_regs *regs);
+-extern void get_fiq_regs(struct pt_regs *regs);
++extern void set_fiq_c_handler(void (*handler)(void));
++extern void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs);
++extern void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs);
+ extern void enable_fiq(int fiq);
+ extern void disable_fiq(int fiq);
+
+diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
+index 6ff7919..c07691e 100644
+--- a/arch/arm/kernel/fiq.c
++++ b/arch/arm/kernel/fiq.c
+@@ -8,6 +8,8 @@
+ *
+ * FIQ support re-written by Russell King to be more generic
+ *
++ * FIQ handler in C supoprt written by Andy Green <andy@openmoko.com>
++ *
+ * We now properly support a method by which the FIQ handlers can
+ * be stacked onto the vector. We still do not support sharing
+ * the FIQ vector itself.
+@@ -124,6 +126,83 @@ void __naked get_fiq_regs(struct pt_regs *regs)
+ : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
+ }
+
++/* -------- FIQ handler in C ---------
++ *
++ * Major Caveats for using this
++ * ---------------------------
++ * *
++ * * 1) it CANNOT touch any vmalloc()'d memory, only memory
++ * that was kmalloc()'d. Static allocations in the monolithic kernel
++ * are kmalloc()'d so they are okay. You can touch memory-mapped IO, but
++ * the pointer for it has to have been stored in kmalloc'd memory. The
++ * reason for this is simple: every now and then Linux turns off interrupts
++ * and reorders the paging tables. If a FIQ happens during this time, the
++ * virtual memory space can be partly or entirely disordered or missing.
++ *
++ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ
++ * ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module. But the way
++ * it is set up, you can all to enable and disable it from your module
++ * and intercommunicate with it through struct fiq_ipc
++ * fiq_ipc which you can define in
++ * asm/archfiq_ipc_type.h. The reason is the same as above, a
++ * FIQ could happen while even the ISR is not present in virtual memory
++ * space due to pagetables being changed at the time.
++ *
++ * 3) You can't call any Linux API code except simple macros
++ * - understand that FIQ can come in at any time, no matter what
++ * state of undress the kernel may privately be in, thinking it
++ * locked the door by turning off interrupts... FIQ is an
++ * unstoppable monster force (which is its value)
++ * - they are not vmalloc()'d memory safe
++ * - they might do crazy stuff like sleep: FIQ pisses fire and
++ * is not interested in 'sleep' that the weak seem to need
++ * - calling APIs from FIQ can re-enter un-renterable things
++ * - summary: you cannot interoperate with linux APIs directly in the FIQ ISR
++ *
++ * If you follow these rules, it is fantastic, an extremely powerful, solid,
++ * genuine hard realtime feature.
++ */
++
++static void (*current_fiq_c_isr)(void);
++#define FIQ_C_ISR_STACK_SIZE 256
++
++static void __attribute__((naked)) __jump_to_isr(void)
++{
++ asm __volatile__ ("mov pc, r8");
++}
++
++
++static void __attribute__((naked)) __actual_isr(void)
++{
++ asm __volatile__ (
++ "stmdb sp!, {r0-r12, lr};"
++ "mov fp, sp;"
++ );
++
++ current_fiq_c_isr();
++
++ asm __volatile__ (
++ "ldmia sp!, {r0-r12, lr};"
++ "subs pc, lr, #4;"
++ );
++}
++
++void set_fiq_c_handler(void (*isr)(void))
++{
++ struct pt_regs regs;
++
++ memset(®s, 0, sizeof(regs));
++ regs.ARM_r8 = (unsigned long) __actual_isr;
++ regs.ARM_sp = 0xffff001c + FIQ_C_ISR_STACK_SIZE;
++
++ set_fiq_handler(__jump_to_isr, 4);
++
++ current_fiq_c_isr = isr;
++
++ set_fiq_regs(®s);
++}
++/* -------- FIQ handler in C ---------*/
++
+ int claim_fiq(struct fiq_handler *f)
+ {
+ int ret = 0;
+diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
+index 69e1be8..11a8664 100644
+--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
++++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
+@@ -12,6 +12,7 @@
+
+ #include <linux/io.h>
+
++#include <mach/irqs.h>
+ #include <mach/hardware.h>
+ #include <mach/regs-irq.h>
+ #include <mach/regs-gpio.h>
+@@ -31,8 +32,15 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+ {
+ unsigned long mask;
+ unsigned long submask;
++#ifdef CONFIG_S3C2440_C_FIQ
++ unsigned long flags;
++#endif
+
+ submask = __raw_readl(S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_save_flags(flags);
++ local_fiq_disable();
++#endif
+ mask = __raw_readl(S3C2410_INTMSK);
+
+ submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+@@ -45,6 +53,9 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+
+ /* write back masks */
+ __raw_writel(submask, S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_irq_restore(flags);
++#endif
+
+ }
+
+@@ -53,8 +64,15 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+ {
+ unsigned long mask;
+ unsigned long submask;
++#ifdef CONFIG_S3C2440_C_FIQ
++ unsigned long flags;
++#endif
+
+ submask = __raw_readl(S3C2410_INTSUBMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_save_flags(flags);
++ local_fiq_disable();
++#endif
+ mask = __raw_readl(S3C2410_INTMSK);
+
+ submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+@@ -63,6 +81,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+ /* write back masks */
+ __raw_writel(submask, S3C2410_INTSUBMSK);
+ __raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_irq_restore(flags);
++#endif
+ }
+
+
+diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
+index 9587377..4b21ac9 100644
+--- a/arch/arm/plat-s3c24xx/irq.c
++++ b/arch/arm/plat-s3c24xx/irq.c
+@@ -28,6 +28,8 @@
+ #include <asm/mach/irq.h>
+
+ #include <plat/regs-irqtype.h>
++#include <mach/regs-irq.h>
++#include <mach/regs-gpio.h>
+
+ #include <plat/cpu.h>
+ #include <plat/pm.h>
+@@ -37,12 +39,20 @@ static void
+ s3c_irq_mask(unsigned int irqno)
+ {
+ unsigned long mask;
+-
++#ifdef CONFIG_S3C2440_C_FIQ
++ unsigned long flags;
++#endif
+ irqno -= IRQ_EINT0;
+-
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_save_flags(flags);
++ local_fiq_disable();
++#endif
+ mask = __raw_readl(S3C2410_INTMSK);
+ mask |= 1UL << irqno;
+ __raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_irq_restore(flags);
++#endif
+ }
+
+ static inline void
+@@ -59,9 +69,19 @@ s3c_irq_maskack(unsigned int irqno)
+ {
+ unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+ unsigned long mask;
+-
++#ifdef CONFIG_S3C2440_C_FIQ
++ unsigned long flags;
++#endif
++
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_save_flags(flags);
++ local_fiq_disable();
++#endif
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask|bitval, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_irq_restore(flags);
++#endif
+
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+@@ -72,15 +92,25 @@ static void
+ s3c_irq_unmask(unsigned int irqno)
+ {
+ unsigned long mask;
++#ifdef CONFIG_S3C2440_C_FIQ
++ unsigned long flags;
++#endif
+
+ if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+ irqdbf2("s3c_irq_unmask %d\n", irqno);
+
+ irqno -= IRQ_EINT0;
+
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_save_flags(flags);
++ local_fiq_disable();
++#endif
+ mask = __raw_readl(S3C2410_INTMSK);
+ mask &= ~(1UL << irqno);
+ __raw_writel(mask, S3C2410_INTMSK);
++#ifdef CONFIG_S3C2440_C_FIQ
++ local_irq_restore(flags);
++#endif
+ }
+
+ struct irq_chip s3c_irq_level_chip = {
+@@ -523,26 +553,26 @@ void __init s3c24xx_init_irq(void)
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+- pend = __raw_readl(S3C2410_INTPND);
++ pend = __raw_readl(S3C2410_SUBSRCPND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+- __raw_writel(pend, S3C2410_SRCPND);
+- __raw_writel(pend, S3C2410_INTPND);
+- printk("irq: clearing pending status %08x\n", (int)pend);
++ printk("irq: clearing subpending status %08x\n", (int)pend);
++ __raw_writel(pend, S3C2410_SUBSRCPND);
+ last = pend;
+ }
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+- pend = __raw_readl(S3C2410_SUBSRCPND);
++ pend = __raw_readl(S3C2410_INTPND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+- printk("irq: clearing subpending status %08x\n", (int)pend);
+- __raw_writel(pend, S3C2410_SUBSRCPND);
++ __raw_writel(pend, S3C2410_SRCPND);
++ __raw_writel(pend, S3C2410_INTPND);
++ printk("irq: clearing pending status %08x\n", (int)pend);
+ last = pend;
+ }
+
+--
+1.5.6.5
+
--- /dev/null
+From 06344e2a663fa052c9ff0c508e8c978ce51d933b Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:42:17 +0200
+Subject: [PATCH] 014-neo1973_mach.patch
+
+---
+ arch/arm/mach-s3c2442/Makefile | 6 ++++++
+ arch/arm/plat-s3c24xx/Kconfig | 16 ++++++++++++++++
+ drivers/misc/Makefile | 3 +++
+ 3 files changed, 25 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
+index 2a19113..1350103 100644
+--- a/arch/arm/mach-s3c2442/Makefile
++++ b/arch/arm/mach-s3c2442/Makefile
+@@ -16,3 +16,8 @@ obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+
+ # Machine support
+
++obj-$(CONFIG_MACH_NEO1973) += \
++ gta02-pm-gsm.o \
++ gta02-pm-gps.o \
++ gta02-pm-bt.o \
++ gta02-pm-wlan.o
+diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
+index 5b0bc91..ee2d47e 100644
+--- a/arch/arm/plat-s3c24xx/Kconfig
++++ b/arch/arm/plat-s3c24xx/Kconfig
+@@ -112,4 +112,20 @@ config MACH_SMDK
+ help
+ Common machine code for SMDK2410 and SMDK2440
+
++config MACH_NEO1973
++ bool
++ select RFKILL
++ select SERIAL_SAMSUNG
++ select SERIAL_SAMSUNG_CONSOLE
++ help
++ Common machine code for Neo1973 hardware
++
++config MACH_NEO1973
++ bool
++ select RFKILL
++ select SERIAL_SAMSUNG
++ select SERIAL_SAMSUNG_CONSOLE
++ help
++ Common machine code for Neo1973 hardware
++
+ endif
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index 36f733c..61888c7 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -22,3 +22,6 @@ obj-$(CONFIG_ISL29003) += isl29003.o
+ obj-$(CONFIG_C2PORT) += c2port/
+ obj-y += eeprom/
+ obj-y += cb710/
++obj-$(CONFIG_MACH_NEO1973) += gta02_pm_host.o \
++ gta02_pm_resume_reason.o
++
+--
+1.5.6.5
+
--- /dev/null
+From 0b75f16634c05f17151bc4409be3a816630bf9f1 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:42:47 +0200
+Subject: [PATCH] 015-mach-gta02.patch
+
+---
+ arch/arm/mach-s3c2410/include/mach/irqs.h | 33 +++++++++++++++++++++++++++-
+ arch/arm/mach-s3c2442/Kconfig | 3 +-
+ arch/arm/mach-s3c2442/Makefile | 3 ++
+ 3 files changed, 36 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
+index 2a2384f..8c65c51 100644
+--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
++++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
+@@ -153,9 +153,9 @@
+ #define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
+
+ #ifdef CONFIG_CPU_S3C2443
+-#define NR_IRQS (IRQ_S3C2443_AC97+1)
++#define _NR_IRQS (IRQ_S3C2443_AC97+1)
+ #else
+-#define NR_IRQS (IRQ_S3C2440_AC97+1)
++#define _NR_IRQS (IRQ_S3C2440_AC97+1)
+ #endif
+
+ /* compatibility define. */
+@@ -167,4 +167,33 @@
+ /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+ #define FIQ_START IRQ_EINT0
+
++
++/*
++ * The next 16 interrupts are for board specific purposes. Since
++ * the kernel can only run on one machine at a time, we can re-use
++ * these. If you need more, increase IRQ_BOARD_END, but keep it
++ * within sensible limits.
++ */
++#define IRQ_BOARD_START _NR_IRQS
++#define IRQ_BOARD_END (_NR_IRQS + 10)
++
++#if defined(CONFIG_MACH_NEO1973_GTA02)
++#define NR_IRQS (IRQ_BOARD_END)
++#else
++#define NR_IRQS (IRQ_BOARD_START)
++#endif
++
++/* Neo1973 GTA02 interrupts */
++#define NEO1973_GTA02_IRQ(x) (IRQ_BOARD_START + (x))
++#define IRQ_GLAMO(x) NEO1973_GTA02_IRQ(x)
++#define IRQ_GLAMO_HOSTBUS IRQ_GLAMO(0)
++#define IRQ_GLAMO_JPEG IRQ_GLAMO(1)
++#define IRQ_GLAMO_MPEG IRQ_GLAMO(2)
++#define IRQ_GLAMO_MPROC1 IRQ_GLAMO(3)
++#define IRQ_GLAMO_MPROC0 IRQ_GLAMO(4)
++#define IRQ_GLAMO_CMDQUEUE IRQ_GLAMO(5)
++#define IRQ_GLAMO_2D IRQ_GLAMO(6)
++#define IRQ_GLAMO_MMC IRQ_GLAMO(7)
++#define IRQ_GLAMO_RISC IRQ_GLAMO(8)
++
+ #endif /* __ASM_ARCH_IRQ_H */
+diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
+index 570cb81..ef8a6d3 100644
+--- a/arch/arm/mach-s3c2442/Kconfig
++++ b/arch/arm/mach-s3c2442/Kconfig
+@@ -34,6 +34,10 @@ config MACH_NEO1973_GTA02
+ select POWER_SUPPLY
+ select MACH_NEO1973
+ select S3C2410_PWM
++ select FIQ
++ select S3C_PWM
++ select S3C_DEV_USB_HOST
++ select S3C24XX_GPIO_EXTRA64
+ help
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
+diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
+index 1350103..d76be29 100644
+--- a/arch/arm/mach-s3c2442/Makefile
++++ b/arch/arm/mach-s3c2442/Makefile
+@@ -9,6 +9,8 @@ obj-m :=
+ obj-n :=
+ obj- :=
+
++obj-$(CONFIG_S3C2440_C_FIQ) += fiq_c_isr.o
++
+ obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+ obj-$(CONFIG_CPU_S3C2442) += clock.o
+
+--
+1.5.6.5
+
--- /dev/null
+From 299fc0aa9b81265b4038dd306de69dec4b24491a Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:43:16 +0200
+Subject: [PATCH] 040-rename-serialdevs.patch
+
+---
+ drivers/serial/samsung.c | 2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
+index c8851a0..bf0af79 100644
+--- a/drivers/serial/samsung.c
++++ b/drivers/serial/samsung.c
+@@ -878,7 +878,7 @@ static struct uart_ops s3c24xx_serial_ops = {
+
+ static struct uart_driver s3c24xx_uart_drv = {
+ .owner = THIS_MODULE,
+- .dev_name = "s3c2410_serial",
++ .dev_name = "ttySAC",
+ .nr = CONFIG_SERIAL_SAMSUNG_UARTS,
+ .cons = S3C24XX_SERIAL_CONSOLE,
+ .driver_name = S3C24XX_SERIAL_NAME,
+--
+1.5.6.5
+
--- /dev/null
+From 0bd4d22c621eef0178be7d518a92a7fe42a37b3c Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:43:48 +0200
+Subject: [PATCH] 050-s3c2442-touchscreen.patch
+
+---
+ arch/arm/mach-s3c2410/include/mach/ts.h | 35 +++++++++++++++++++++++++++++++
+ arch/arm/plat-s3c/include/plat/devs.h | 3 +-
+ arch/arm/plat-s3c24xx/devs.c | 20 +++++++++++++++++
+ arch/arm/plat-s3c24xx/s3c244x.c | 3 ++
+ drivers/input/touchscreen/Kconfig | 18 ++++++++++++++++
+ drivers/input/touchscreen/Makefile | 1 +
+ 6 files changed, 79 insertions(+), 1 deletions(-)
+ create mode 100644 arch/arm/mach-s3c2410/include/mach/ts.h
+
+diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h
+new file mode 100644
+index 0000000..f84324d
+--- /dev/null
++++ b/arch/arm/mach-s3c2410/include/mach/ts.h
+@@ -0,0 +1,35 @@
++/* arch/arm/mach-s3c2410/include/mach/ts.h
++ *
++ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
++ *
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ *
++ * Changelog:
++ * 24-Mar-2005 RTP Created file
++ * 03-Aug-2005 RTP Renamed to ts.h
++ */
++
++#ifndef __ASM_ARM_TS_H
++#define __ASM_ARM_TS_H
++
++#include <linux/touchscreen/ts_filter.h>
++
++struct s3c2410_ts_mach_info {
++ /* Touchscreen delay. */
++ int delay;
++ /* Prescaler value. */
++ int presc;
++ /*
++ * Null-terminated array of pointers to filter APIs and configurations
++ * we want to use. In the same order they will be applied.
++ */
++ const struct ts_filter_chain_configuration *filter_config;
++};
++
++void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info);
++
++#endif /* __ASM_ARM_TS_H */
+diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
+index 49504b3..105ad09 100644
+--- a/arch/arm/plat-s3c/include/plat/devs.h
++++ b/arch/arm/plat-s3c/include/plat/devs.h
+@@ -55,10 +55,11 @@ extern struct platform_device s3c_device_nand;
+ extern struct platform_device s3c_device_usbgadget;
+ extern struct platform_device s3c_device_usb_hsotg;
+
++extern struct platform_device s3c_device_ts;
++
+ /* s3c2440 specific devices */
+
+ #ifdef CONFIG_CPU_S3C2440
+
+ extern struct platform_device s3c_device_camif;
+-
+ #endif
+diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
+index 4eb378c..0fdaa54 100644
+--- a/arch/arm/plat-s3c24xx/devs.c
++++ b/arch/arm/plat-s3c24xx/devs.c
+@@ -26,6 +26,8 @@
+ #include <asm/mach/irq.h>
+ #include <mach/fb.h>
+ #include <mach/hardware.h>
++#include <mach/ts.h>
++#include <asm/io.h>
+ #include <asm/irq.h>
+
+ #include <plat/regs-serial.h>
+@@ -199,6 +201,24 @@ struct platform_device s3c_device_nand = {
+
+ EXPORT_SYMBOL(s3c_device_nand);
+
++/* Touchscreen */
++struct platform_device s3c_device_ts = {
++ .name = "s3c2410-ts",
++ .id = -1,
++};
++
++EXPORT_SYMBOL(s3c_device_ts);
++
++static struct s3c2410_ts_mach_info s3c2410ts_info;
++
++void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
++{
++ memcpy(&s3c2410ts_info, hard_s3c2410ts_info,
++ sizeof(struct s3c2410_ts_mach_info));
++ s3c_device_ts.dev.platform_data = &s3c2410ts_info;
++}
++EXPORT_SYMBOL(set_s3c2410ts_info);
++
+ /* USB Device (Gadget)*/
+
+ static struct resource s3c_usbgadget_resource[] = {
+diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
+index 1364317..0731b23 100644
+--- a/arch/arm/plat-s3c24xx/s3c244x.c
++++ b/arch/arm/plat-s3c24xx/s3c244x.c
+@@ -59,6 +59,8 @@ void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+ }
+
++extern struct platform_device s3c_device_ts;
++
+ void __init s3c244x_map_io(void)
+ {
+ /* register our io-tables */
+@@ -70,6 +72,7 @@ void __init s3c244x_map_io(void)
+ s3c_device_sdi.name = "s3c2440-sdi";
+ s3c_device_i2c0.name = "s3c2440-i2c";
+ s3c_device_nand.name = "s3c2440-nand";
++ s3c_device_ts.name = "s3c2440-ts";
+ s3c_device_usbgadget.name = "s3c2440-usbgadget";
+ }
+
+diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
+index 72e2712..2bb711f 100644
+--- a/drivers/input/touchscreen/Kconfig
++++ b/drivers/input/touchscreen/Kconfig
+@@ -133,6 +133,24 @@ config TOUCHSCREEN_FUJITSU
+ To compile this driver as a module, choose M here: the
+ module will be called fujitsu-ts.
+
++config TOUCHSCREEN_S3C2410
++ tristate "Samsung S3C2410 touchscreen input driver"
++ depends on ARCH_S3C2410 && INPUT && INPUT_TOUCHSCREEN
++ select SERIO
++ help
++ Say Y here if you have the s3c2410 touchscreen.
++
++ If unsure, say N.
++
++ To compile this driver as a module, choose M here: the
++ module will be called s3c2410_ts.
++
++config TOUCHSCREEN_S3C2410_DEBUG
++ boolean "Samsung S3C2410 touchscreen debug messages"
++ depends on TOUCHSCREEN_S3C2410
++ help
++ Select this if you want debug messages
++
+ config TOUCHSCREEN_GUNZE
+ tristate "Gunze AHL-51S touchscreen"
+ select SERIO
+diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
+index 3e1c5e0..269814c 100644
+--- a/drivers/input/touchscreen/Makefile
++++ b/drivers/input/touchscreen/Makefile
+@@ -40,3 +40,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
+ obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
++obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
+--
+1.5.6.5
+
--- /dev/null
+From 2709e2e76025aa69d768a80d66ef1852dde7abc8 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:44:57 +0200
+Subject: [PATCH] 052-touchscreen_filter.patch
+
+---
+ drivers/input/touchscreen/Kconfig | 48 ++++++++++++++++++++++++++++++++++++
+ drivers/input/touchscreen/Makefile | 5 +++
+ 2 files changed, 53 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
+index 2bb711f..2b78885 100644
+--- a/drivers/input/touchscreen/Kconfig
++++ b/drivers/input/touchscreen/Kconfig
+@@ -11,6 +11,54 @@ menuconfig INPUT_TOUCHSCREEN
+
+ if INPUT_TOUCHSCREEN
+
++menuconfig TOUCHSCREEN_FILTER
++ boolean "Touchscreen Filtering"
++ depends on INPUT_TOUCHSCREEN
++ select TOUCHSCREEN_FILTER_GROUP
++ select TOUCHSCREEN_FILTER_MEDIAN
++ select TOUCHSCREEN_FILTER_MEAN
++ select TOUCHSCREEN_FILTER_LINEAR
++ help
++ Select this to include kernel touchscreen filter support. The filters
++ can be combined in any order in your machine init and the parameters
++ for them can also be set there.
++
++if TOUCHSCREEN_FILTER
++
++config TOUCHSCREEN_FILTER_GROUP
++ bool "Group Touchscreen Filter"
++ depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++ default Y
++ help
++ Say Y here if you want to use the Group touchscreen filter, it
++ avoids using atypical samples.
++
++config TOUCHSCREEN_FILTER_MEDIAN
++ bool "Median Average Touchscreen Filter"
++ depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++ default Y
++ help
++ Say Y here if you want to use the Median touchscreen filter, it's
++ highly effective if you data is noisy with occasional excursions.
++
++config TOUCHSCREEN_FILTER_MEAN
++ bool "Mean Average Touchscreen Filter"
++ depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++ default Y
++ help
++ Say Y here if you want to use the Mean touchscreen filter, it
++ can further improve decent quality data by removing jitter
++
++config TOUCHSCREEN_FILTER_LINEAR
++ bool "Linear Touchscreen Filter"
++ depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
++ default Y
++ help
++ Say Y here if you want to use the Linear touchscreen filter, it
++ enables the use of calibration data for the touchscreen.
++
++endif
++
+ config TOUCHSCREEN_ADS7846
+ tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
+ depends on SPI_MASTER
+diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
+index 269814c..538e035 100644
+--- a/drivers/input/touchscreen/Makefile
++++ b/drivers/input/touchscreen/Makefile
+@@ -41,3 +41,8 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
+ obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
+ obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER) += ts_filter_chain.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_GROUP) += ts_filter_group.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_LINEAR) += ts_filter_linear.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_MEDIAN) += ts_filter_median.o
++obj-$(CONFIG_TOUCHSCREEN_FILTER_MEAN) += ts_filter_mean.o
+--
+1.5.6.5
+
--- /dev/null
+From 638b05549def8b8c257a802da780c06055ef9a9e Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:45:12 +0200
+Subject: [PATCH] 053-glamo.patch
+
+---
+ drivers/mfd/Kconfig | 2 ++
+ drivers/mfd/Makefile | 1 +
+ 2 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
+index 491ac0f..cc1f6ed 100644
+--- a/drivers/mfd/Kconfig
++++ b/drivers/mfd/Kconfig
+@@ -263,6 +263,8 @@ config EZX_PCAP
+ This enables the PCAP ASIC present on EZX Phones. This is
+ needed for MMC, TouchScreen, Sound, USB, etc..
+
++source "drivers/mfd/glamo/Kconfig"
++
+ endmenu
+
+ menu "Multimedia Capabilities Port drivers"
+diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
+index 6f8a9a1..b724861 100644
+--- a/drivers/mfd/Makefile
++++ b/drivers/mfd/Makefile
+@@ -4,6 +4,7 @@
+
+ obj-$(CONFIG_MFD_SM501) += sm501.o
+ obj-$(CONFIG_MFD_ASIC3) += asic3.o
++obj-$(CONFIG_MFD_GLAMO) += glamo/
+
+ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
+ obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
+--
+1.5.6.5
+
--- /dev/null
+From 4efa3f8f53d8249905a1c9216a0fe5473d5df5c4 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:45:26 +0200
+Subject: [PATCH] 054-bq27000.patch
+
+---
+ drivers/power/Kconfig | 12 ++++++++++++
+ drivers/power/Makefile | 3 +++
+ 2 files changed, 15 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
+index 7eda348..3661595 100644
+--- a/drivers/power/Kconfig
++++ b/drivers/power/Kconfig
+@@ -96,4 +96,16 @@ config CHARGER_PCF50633
+ help
+ Say Y to include support for NXP PCF50633 Main Battery Charger.
+
++config BATTERY_BQ27000_HDQ
++ tristate "BQ27000 HDQ battery monitor driver"
++ help
++ Say Y to enable support for the battery on the Neo Freerunner
++
++config HDQ_GPIO_BITBANG
++ bool "Generic gpio based HDQ bitbang"
++ help
++ Say Y to enable supoort for generic gpio based HDQ bitbang driver.
++ This can not be built as a module.
++
+ endif # POWER_SUPPLY
++
+diff --git a/drivers/power/Makefile b/drivers/power/Makefile
+index daf3179..e277a05 100644
+--- a/drivers/power/Makefile
++++ b/drivers/power/Makefile
+@@ -27,3 +27,6 @@ obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
+ obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
+ obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
+ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
++obj-$(CONFIG_BATTERY_BQ27000_HDQ) += bq27000_battery.o
++
++obj-$(CONFIG_HDQ_GPIO_BITBANG) += hdq.o
+--
+1.5.6.5
+
--- /dev/null
+From 2f5ce947444bafc565d67b7f14316becda441b24 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:46:35 +0200
+Subject: [PATCH] 055-gta02-leds.patch
+
+---
+ drivers/leds/Kconfig | 13 +++++++++++++
+ drivers/leds/Makefile | 2 ++
+ 2 files changed, 15 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
+index 7c8e712..9960398 100644
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -229,6 +229,12 @@ config LEDS_BD2802
+ This option enables support for BD2802GU RGB LED driver chips
+ accessed via the I2C bus.
+
++config LEDS_GTA02_VIBRATOR
++ tristate "Vibrator Support for the Openmoko Freerunner GSM phone"
++ depends on LEDS_CLASS && MACH_NEO1973_GTA02
++ help
++ This option enables support for the vibrator on the Openmoko Freerunner.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGERS
+diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
+index e8cdcf7..ff4a6d7 100644
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
++obj-$(CONFIG_LEDS_GTA02_VIBRATOR) += leds-gta02-vibrator.o
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+--
+1.5.6.5
+
--- /dev/null
+From ad6c7d39f8898477da5e810dfc2cc7560618661f Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 19:11:41 +0200
+Subject: [PATCH] 055-jbt6k74.patch
+
+---
+ drivers/video/display/Kconfig | 11 +++++++++++
+ drivers/video/display/Makefile | 1 +
+ 2 files changed, 12 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/display/Kconfig b/drivers/video/display/Kconfig
+index f99af93..1c9e760 100644
+--- a/drivers/video/display/Kconfig
++++ b/drivers/video/display/Kconfig
+@@ -21,4 +21,15 @@ config DISPLAY_SUPPORT
+ comment "Display hardware drivers"
+ depends on DISPLAY_SUPPORT
+
++config DISPLAY_JBT6K74
++ tristate "TPO JBT6K74-AS TFT display ASIC control interface"
++ depends on SPI_MASTER && SYSFS && LCD_CLASS_DEVICE
++ help
++ SPI driver for the control interface of TFT panels containing
++ the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1
++ TFT diplay module used in the Openmoko Freerunner GSM phone.
++
++ The control interface is required for display operation, as it
++ controls power management, display timing and gamma calibration.
++
+ endmenu
+diff --git a/drivers/video/display/Makefile b/drivers/video/display/Makefile
+index c0ea832..011b69d 100644
+--- a/drivers/video/display/Makefile
++++ b/drivers/video/display/Makefile
+@@ -3,4 +3,5 @@
+ display-objs := display-sysfs.o
+
+ obj-$(CONFIG_DISPLAY_SUPPORT) += display.o
++obj-$(CONFIG_DISPLAY_JBT6K74) += jbt6k74.o
+
+--
+1.5.6.5
+
--- /dev/null
+From 20fb4fd1e317dadaaaaeb9c153098b57d0fc86fe Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:47:03 +0200
+Subject: [PATCH] 056-pcf50633.patch
+
+---
+ drivers/mfd/pcf50633-core.c | 16 +++--
+ drivers/power/pcf50633-charger.c | 121 ++++++++++++++++++++++++++++---
+ drivers/regulator/pcf50633-regulator.c | 60 +++++++++++++---
+ drivers/rtc/rtc-pcf50633.c | 12 +++-
+ include/linux/mfd/pcf50633/core.h | 5 +-
+ 5 files changed, 180 insertions(+), 34 deletions(-)
+
+diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
+index 8d3c38b..e81c967 100644
+--- a/drivers/mfd/pcf50633-core.c
++++ b/drivers/mfd/pcf50633-core.c
+@@ -15,6 +15,7 @@
+ #include <linux/kernel.h>
+ #include <linux/device.h>
+ #include <linux/sysfs.h>
++#include <linux/device.h>
+ #include <linux/module.h>
+ #include <linux/types.h>
+ #include <linux/interrupt.h>
+@@ -345,6 +346,8 @@ static void pcf50633_irq_worker(struct work_struct *work)
+ goto out;
+ }
+
++ pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04 ); /* defeat 8s death from lowsys on A5 */
++
+ /* We immediately read the usb and adapter status. We thus make sure
+ * only of USBINS/USBREM IRQ handlers are called */
+ if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
+@@ -482,13 +485,13 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
+ }
+
+ #ifdef CONFIG_PM
+-static int pcf50633_suspend(struct device *dev, pm_message_t state)
++static int pcf50633_suspend(struct i2c_client *client, pm_message_t state)
+ {
+ struct pcf50633 *pcf;
+ int ret = 0, i;
+ u8 res[5];
+
+- pcf = dev_get_drvdata(dev);
++ pcf = i2c_get_clientdata(client);
+
+ /* Make sure our interrupt handlers are not called
+ * henceforth */
+@@ -523,12 +526,12 @@ out:
+ return ret;
+ }
+
+-static int pcf50633_resume(struct device *dev)
++static int pcf50633_resume(struct i2c_client *client)
+ {
+ struct pcf50633 *pcf;
+ int ret;
+
+- pcf = dev_get_drvdata(dev);
++ pcf = i2c_get_clientdata(client);
+
+ /* Write the saved mask registers */
+ ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+@@ -625,6 +628,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
+ }
+
+ if (client->irq) {
++ set_irq_handler(client->irq, handle_level_irq);
+ ret = request_irq(client->irq, pcf50633_irq,
+ IRQF_TRIGGER_LOW, "pcf50633", pcf);
+
+@@ -683,12 +687,12 @@ static struct i2c_device_id pcf50633_id_table[] = {
+ static struct i2c_driver pcf50633_driver = {
+ .driver = {
+ .name = "pcf50633",
+- .suspend = pcf50633_suspend,
+- .resume = pcf50633_resume,
+ },
+ .id_table = pcf50633_id_table,
+ .probe = pcf50633_probe,
+ .remove = __devexit_p(pcf50633_remove),
++ .suspend = pcf50633_suspend,
++ .resume = pcf50633_resume,
+ };
+
+ static int __init pcf50633_init(void)
+diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
+index e8b278f..41fa421 100644
+--- a/drivers/power/pcf50633-charger.c
++++ b/drivers/power/pcf50633-charger.c
+@@ -36,6 +36,7 @@ struct pcf50633_mbc {
+
+ struct power_supply usb;
+ struct power_supply adapter;
++ struct power_supply ac;
+
+ struct delayed_work charging_restart_work;
+ };
+@@ -47,16 +48,21 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+ u8 bits;
+ int charging_start = 1;
+ u8 mbcs2, chgmod;
++ unsigned int mbcc5;
+
+- if (ma >= 1000)
++ if (ma >= 1000) {
+ bits = PCF50633_MBCC7_USB_1000mA;
+- else if (ma >= 500)
++ ma = 1000;
++ } else if (ma >= 500) {
+ bits = PCF50633_MBCC7_USB_500mA;
+- else if (ma >= 100)
++ ma = 500;
++ } else if (ma >= 100) {
+ bits = PCF50633_MBCC7_USB_100mA;
+- else {
++ ma = 100;
++ } else {
+ bits = PCF50633_MBCC7_USB_SUSPEND;
+ charging_start = 0;
++ ma = 0;
+ }
+
+ ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
+@@ -66,7 +72,22 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+ else
+ dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
+
+- /* Manual charging start */
++ /*
++ * We limit the charging current to be the USB current limit.
++ * The reason is that on pcf50633, when it enters PMU Standby mode,
++ * which it does when the device goes "off", the USB current limit
++ * reverts to the variant default. In at least one common case, that
++ * default is 500mA. By setting the charging current to be the same
++ * as the USB limit we set here before PMU standby, we enforce it only
++ * using the correct amount of current even when the USB current limit
++ * gets reset to the wrong thing
++ */
++
++ mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
++ if (mbcc5 > 255)
++ mbcc5 = 255;
++ pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
++
+ mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+
+@@ -81,7 +102,7 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+ PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
+
+ mbc->usb_active = charging_start;
+-
++
+ power_supply_changed(&mbc->usb);
+
+ return ret;
+@@ -156,9 +177,44 @@ static ssize_t set_usblim(struct device *dev,
+
+ static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
+
++static ssize_t
++show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
++{
++ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
++ u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
++ unsigned int ma;
++
++ ma = (mbc->pcf->pdata->chg_ref_current_ma * mbcc5) >> 8;
++
++ return sprintf(buf, "%u\n", ma);
++}
++
++static ssize_t set_chglim(struct device *dev,
++ struct device_attribute *attr, const char *buf, size_t count)
++{
++ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
++ unsigned long ma;
++ unsigned int mbcc5;
++ int ret;
++
++ ret = strict_strtoul(buf, 10, &ma);
++ if (ret)
++ return -EINVAL;
++
++ mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
++ if (mbcc5 > 255)
++ mbcc5 = 255;
++ pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
++
++ return count;
++}
++
++static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
++
+ static struct attribute *pcf50633_mbc_sysfs_entries[] = {
+ &dev_attr_chgmode.attr,
+ &dev_attr_usb_curlim.attr,
++ &dev_attr_chg_curlim.attr,
+ NULL,
+ };
+
+@@ -239,6 +295,7 @@ pcf50633_mbc_irq_handler(int irq, void *data)
+
+ power_supply_changed(&mbc->usb);
+ power_supply_changed(&mbc->adapter);
++ power_supply_changed(&mbc->ac);
+
+ if (mbc->pcf->pdata->mbc_event_callback)
+ mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
+@@ -248,8 +305,7 @@ static int adapter_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+ {
+- struct pcf50633_mbc *mbc = container_of(psy,
+- struct pcf50633_mbc, adapter);
++ struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, adapter);
+ int ret = 0;
+
+ switch (psp) {
+@@ -269,10 +325,34 @@ static int usb_get_property(struct power_supply *psy,
+ {
+ struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
+ int ret = 0;
++ u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
++ PCF50633_MBCC7_USB_MASK;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+- val->intval = mbc->usb_online;
++ val->intval = mbc->usb_online &&
++ (usblim <= PCF50633_MBCC7_USB_500mA);
++ break;
++ default:
++ ret = -EINVAL;
++ break;
++ }
++ return ret;
++}
++
++static int ac_get_property(struct power_supply *psy,
++ enum power_supply_property psp,
++ union power_supply_propval *val)
++{
++ struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, ac);
++ int ret = 0;
++ u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
++ PCF50633_MBCC7_USB_MASK;
++
++ switch (psp) {
++ case POWER_SUPPLY_PROP_ONLINE:
++ val->intval = mbc->usb_online &&
++ (usblim == PCF50633_MBCC7_USB_1000mA);
+ break;
+ default:
+ ret = -EINVAL;
+@@ -337,6 +417,17 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
+ mbc->usb.supplied_to = mbc->pcf->pdata->batteries;
+ mbc->usb.num_supplicants = mbc->pcf->pdata->num_batteries;
+
++ mbc->ac.name = "ac";
++ mbc->ac.type = POWER_SUPPLY_TYPE_MAINS;
++ mbc->ac.properties = power_props;
++ mbc->ac.num_properties = ARRAY_SIZE(power_props);
++ mbc->ac.get_property = ac_get_property;
++ mbc->ac.supplied_to = mbc->pcf->pdata->batteries;
++ mbc->ac.num_supplicants = mbc->pcf->pdata->num_batteries;
++
++ INIT_DELAYED_WORK(&mbc->charging_restart_work,
++ pcf50633_mbc_charging_restart);
++
+ ret = power_supply_register(&pdev->dev, &mbc->adapter);
+ if (ret) {
+ dev_err(mbc->pcf->dev, "failed to register adapter\n");
+@@ -352,9 +443,15 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
+ return ret;
+ }
+
+- INIT_DELAYED_WORK(&mbc->charging_restart_work,
+- pcf50633_mbc_charging_restart);
+-
++ ret = power_supply_register(&pdev->dev, &mbc->ac);
++ if (ret) {
++ dev_err(mbc->pcf->dev, "failed to register ac\n");
++ power_supply_unregister(&mbc->adapter);
++ power_supply_unregister(&mbc->usb);
++ kfree(mbc);
++ return ret;
++ }
++
+ ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
+ if (ret)
+ dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
+diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
+index 8e14900..4809789 100644
+--- a/drivers/regulator/pcf50633-regulator.c
++++ b/drivers/regulator/pcf50633-regulator.c
+@@ -24,11 +24,12 @@
+ #include <linux/mfd/pcf50633/core.h>
+ #include <linux/mfd/pcf50633/pmic.h>
+
+-#define PCF50633_REGULATOR(_name, _id) \
++#define PCF50633_REGULATOR(_name, _id, _n) \
+ { \
+ .name = _name, \
+ .id = _id, \
+ .ops = &pcf50633_regulator_ops, \
++ .n_voltages = _n, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ }
+@@ -193,6 +194,40 @@ static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
+ return millivolts * 1000;
+ }
+
++static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
++ unsigned int index)
++{
++ struct pcf50633 *pcf;
++ int regulator_id, millivolts;
++
++ pcf = rdev_get_drvdata(rdev);;
++
++ regulator_id = rdev_get_id(rdev);
++
++ switch (regulator_id) {
++ case PCF50633_REGULATOR_AUTO:
++ millivolts = auto_voltage_value(index + 0x2f);
++ break;
++ case PCF50633_REGULATOR_DOWN1:
++ case PCF50633_REGULATOR_DOWN2:
++ millivolts = down_voltage_value(index);
++ break;
++ case PCF50633_REGULATOR_LDO1:
++ case PCF50633_REGULATOR_LDO2:
++ case PCF50633_REGULATOR_LDO3:
++ case PCF50633_REGULATOR_LDO4:
++ case PCF50633_REGULATOR_LDO5:
++ case PCF50633_REGULATOR_LDO6:
++ case PCF50633_REGULATOR_HCLDO:
++ millivolts = ldo_voltage_value(index);
++ break;
++ default:
++ return -EINVAL;
++ }
++
++ return millivolts * 1000;
++}
++
+ static int pcf50633_regulator_enable(struct regulator_dev *rdev)
+ {
+ struct pcf50633 *pcf = rdev_get_drvdata(rdev);
+@@ -246,6 +281,7 @@ static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev)
+ static struct regulator_ops pcf50633_regulator_ops = {
+ .set_voltage = pcf50633_regulator_set_voltage,
+ .get_voltage = pcf50633_regulator_get_voltage,
++ .list_voltage = pcf50633_regulator_list_voltage,
+ .enable = pcf50633_regulator_enable,
+ .disable = pcf50633_regulator_disable,
+ .is_enabled = pcf50633_regulator_is_enabled,
+@@ -253,27 +289,27 @@ static struct regulator_ops pcf50633_regulator_ops = {
+
+ static struct regulator_desc regulators[] = {
+ [PCF50633_REGULATOR_AUTO] =
+- PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO),
++ PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO, 80),
+ [PCF50633_REGULATOR_DOWN1] =
+- PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1),
++ PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1, 95),
+ [PCF50633_REGULATOR_DOWN2] =
+- PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2),
++ PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2, 95),
+ [PCF50633_REGULATOR_LDO1] =
+- PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1),
++ PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1, 27),
+ [PCF50633_REGULATOR_LDO2] =
+- PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2),
++ PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2, 27),
+ [PCF50633_REGULATOR_LDO3] =
+- PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3),
++ PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3, 27),
+ [PCF50633_REGULATOR_LDO4] =
+- PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4),
++ PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4, 27),
+ [PCF50633_REGULATOR_LDO5] =
+- PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5),
++ PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5, 27),
+ [PCF50633_REGULATOR_LDO6] =
+- PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6),
++ PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6, 27),
+ [PCF50633_REGULATOR_HCLDO] =
+- PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO),
++ PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO, 26),
+ [PCF50633_REGULATOR_MEMLDO] =
+- PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO),
++ PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO, 27),
+ };
+
+ static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
+diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
+index f4dd87e..8669815 100644
+--- a/drivers/rtc/rtc-pcf50633.c
++++ b/drivers/rtc/rtc-pcf50633.c
+@@ -58,6 +58,7 @@ struct pcf50633_time {
+ struct pcf50633_rtc {
+ int alarm_enabled;
+ int second_enabled;
++ int alarm_pending;
+
+ struct pcf50633 *pcf;
+ struct rtc_device *rtc_dev;
+@@ -70,7 +71,7 @@ static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf)
+ rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]);
+ rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]);
+ rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]);
+- rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]);
++ rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1;
+ rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100;
+ }
+
+@@ -81,7 +82,7 @@ static void rtc2pcf_time(struct pcf50633_time *pcf, struct rtc_time *rtc)
+ pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour);
+ pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday);
+ pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday);
+- pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon);
++ pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1);
+ pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
+ }
+
+@@ -209,6 +210,7 @@ static int pcf50633_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+ rtc = dev_get_drvdata(dev);
+
+ alrm->enabled = rtc->alarm_enabled;
++ alrm->pending = rtc->alarm_pending;
+
+ ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSCA,
+ PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+@@ -244,9 +246,12 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+ /* Returns 0 on success */
+ ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
+ PCF50633_TI_EXTENT, &pcf_tm.time[0]);
++ if (!alrm->enabled)
++ rtc->alarm_pending = 0;
+
+- if (!alarm_masked)
++ if (!alarm_masked || alrm->enabled)
+ pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
++ rtc->alarm_enabled = alrm->enabled;
+
+ return ret;
+ }
+@@ -267,6 +272,7 @@ static void pcf50633_rtc_irq(int irq, void *data)
+ switch (irq) {
+ case PCF50633_IRQ_ALARM:
+ rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
++ rtc->alarm_pending = 1;
+ break;
+ case PCF50633_IRQ_SECOND:
+ rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
+diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
+index c8f51c3..af67b4e 100644
+--- a/include/linux/mfd/pcf50633/core.h
++++ b/include/linux/mfd/pcf50633/core.h
+@@ -31,6 +31,8 @@ struct pcf50633_platform_data {
+
+ int charging_restart_interval;
+
++ int chg_ref_current_ma;
++
+ /* Callbacks */
+ void (*probe_done)(struct pcf50633 *);
+ void (*mbc_event_callback)(struct pcf50633 *, int);
+@@ -208,7 +210,8 @@ enum pcf50633_reg_int5 {
+ };
+
+ /* misc. registers */
+-#define PCF50633_REG_OOCSHDWN 0x0c
++#define PCF50633_REG_OOCSHDWN 0x0c
++#define PCF50633_OOCSHDWN_GOSTDBY 0x01
+
+ /* LED registers */
+ #define PCF50633_REG_LEDOUT 0x28
+--
+1.5.6.5
+
--- /dev/null
+From 3c9a0b287a1ca66e24e041c87047bb559b855ef8 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:47:58 +0200
+Subject: [PATCH] 057-lis302dl.patch
+
+---
+ drivers/input/misc/Kconfig | 9 +++++++++
+ drivers/input/misc/Makefile | 2 ++
+ 2 files changed, 11 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
+index 1acfa3a..4af8eb4 100644
+--- a/drivers/input/misc/Kconfig
++++ b/drivers/input/misc/Kconfig
+@@ -230,6 +230,15 @@ config HP_SDC_RTC
+ Say Y here if you want to support the built-in real time clock
+ of the HP SDC controller.
+
++config INPUT_LIS302DL
++ tristate "STmicro LIS302DL 3-axis accelerometer"
++ depends on SPI_MASTER
++ help
++ SPI driver for the STmicro LIS302DL 3-axis accelerometer.
++
++ The userspece interface is a 3-axis (X/Y/Z) relative movement
++ Linux input device, reporting REL_[XYZ] events.
++
+ config INPUT_PCF50633_PMU
+ tristate "PCF50633 PMU events"
+ depends on MFD_PCF50633
+diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
+index 0d979fd..c959f35 100644
+--- a/drivers/input/misc/Makefile
++++ b/drivers/input/misc/Makefile
+@@ -14,6 +14,7 @@ obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
+ obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
+ obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
+ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
++obj-$(CONFIG_INPUT_LIS302DL) += lis302dl.o
+ obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
+ obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
+ obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
+--
+1.5.6.5
+
--- /dev/null
+From 683fb017d43f8ea5ee2b06f81102fd212754bc1b Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:48:25 +0200
+Subject: [PATCH] 058-gta02-wm8752.patch
+
+---
+ sound/soc/s3c24xx/Kconfig | 10 ++++++++++
+ sound/soc/s3c24xx/Makefile | 2 ++
+ 2 files changed, 12 insertions(+), 0 deletions(-)
+
+diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
+index df494d1..fb80568 100644
+--- a/sound/soc/s3c24xx/Kconfig
++++ b/sound/soc/s3c24xx/Kconfig
+@@ -42,10 +42,20 @@ config SND_S3C24XX_SOC_JIVE_WM8750
+ tristate "SoC I2S Audio support for Jive"
+ depends on SND_S3C24XX_SOC && MACH_JIVE
+ select SND_SOC_WM8750
++ select SND_SOC_WM8750_SPI
+ select SND_S3C2412_SOC_I2S
+ help
+ Sat Y if you want to add support for SoC audio on the Jive.
+
++config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
++ tristate "SoC I2S Audio support for Openmoko Freerunner - WM8753"
++ depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
++ select SND_S3C24XX_SOC_I2S
++ select SND_SOC_WM8753
++ help
++ Say Y if you want to add support for SoC audio on Openmoko Freerunner
++ with the WM8753 codec
++
+ config SND_S3C24XX_SOC_SMDK2443_WM9710
+ tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
+ depends on SND_S3C24XX_SOC && MACH_SMDK2443
+diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
+index 07a93a2..31c4ef9 100644
+--- a/sound/soc/s3c24xx/Makefile
++++ b/sound/soc/s3c24xx/Makefile
+@@ -19,9 +19,11 @@ snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
+ snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
+ snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
+ snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
++snd-soc-neo1973-gta02-wm8753-objs := gta02_wm8753.o
+
+ obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
++obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
+--
+1.5.6.5
+
--- /dev/null
+From 006889d8ad621199adcfae58461a721c41f7e333 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:50:16 +0200
+Subject: [PATCH] 068-ar6000.patch
+
+---
+ arch/arm/Kconfig | 2 ++
+ drivers/Makefile | 1 +
+ 2 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index aef63c8..be8ebe3 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -1455,6 +1455,8 @@ source "drivers/usb/Kconfig"
+
+ source "drivers/uwb/Kconfig"
+
++source "drivers/ar6000/Kconfig"
++
+ source "drivers/mmc/Kconfig"
+
+ source "drivers/memstick/Kconfig"
+diff --git a/drivers/Makefile b/drivers/Makefile
+index bc4205d..687db85 100644
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -92,6 +92,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle/
+ obj-y += idle/
+ obj-$(CONFIG_MMC) += mmc/
+ obj-$(CONFIG_MEMSTICK) += memstick/
++obj-$(CONFIG_AR6000_WLAN) += ar6000/
+ obj-$(CONFIG_NEW_LEDS) += leds/
+ obj-$(CONFIG_INFINIBAND) += infiniband/
+ obj-$(CONFIG_SGI_SN) += sn/
+--
+1.5.6.5
+
--- /dev/null
+From 730b77ed17f637237c16579ad9849b2a994b61a3 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:50:43 +0200
+Subject: [PATCH] 070-s3c24xx-time.patch
+
+---
+ arch/arm/plat-s3c24xx/time.c | 480 ++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 480 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/plat-s3c24xx/time.c
+
+diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
+new file mode 100644
+index 0000000..713a6bc
+--- /dev/null
++++ b/arch/arm/plat-s3c24xx/time.c
+@@ -0,0 +1,480 @@
++/* linux/arch/arm/plat-s3c24xx/time.c
++ *
++ * Copyright (C) 2003-2005 Simtec Electronics
++ * Ben Dooks, <ben@simtec.co.uk>
++ *
++ * dyn_tick support by Andrzej Zaborowski based on omap_dyn_tick_timer.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
++ */
++
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++
++#include <asm/system.h>
++#include <asm/leds.h>
++#include <asm/mach-types.h>
++
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <mach/map.h>
++#include <asm/plat-s3c/regs-timer.h>
++#include <mach/regs-irq.h>
++#include <asm/mach/time.h>
++
++#include <asm/plat-s3c24xx/clock.h>
++#include <asm/plat-s3c24xx/cpu.h>
++
++static unsigned long timer_startval;
++static unsigned long timer_usec_ticks;
++static struct work_struct resume_work;
++
++unsigned long pclk;
++struct clk *clk;
++
++#define TIMER_USEC_SHIFT 16
++
++/* we use the shifted arithmetic to work out the ratio of timer ticks
++ * to usecs, as often the peripheral clock is not a nice even multiple
++ * of 1MHz.
++ *
++ * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
++ * for the current HZ value of 200 without producing overflows.
++ *
++ * Original patch by Dimitry Andric, updated by Ben Dooks
++*/
++
++
++/* timer_mask_usec_ticks
++ *
++ * given a clock and divisor, make the value to pass into timer_ticks_to_usec
++ * to scale the ticks into usecs
++*/
++
++static inline unsigned long
++timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
++{
++ unsigned long den = pclk / 1000;
++
++ return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
++}
++
++/* timer_ticks_to_usec
++ *
++ * convert timer ticks to usec.
++*/
++
++static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
++{
++ unsigned long res;
++
++ res = ticks * timer_usec_ticks;
++ res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */
++
++ return res >> TIMER_USEC_SHIFT;
++}
++
++/***
++ * Returns microsecond since last clock interrupt. Note that interrupts
++ * will have been disabled by do_gettimeoffset()
++ * IRQs are disabled before entering here from do_gettimeofday()
++ */
++
++#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
++
++unsigned long s3c2410_gettimeoffset (void)
++{
++ unsigned long tdone;
++ unsigned long irqpend;
++ unsigned long tval;
++
++ /* work out how many ticks have gone since last timer interrupt */
++
++ tval = __raw_readl(S3C2410_TCNTO(4));
++ tdone = timer_startval - tval;
++
++ /* check to see if there is an interrupt pending */
++
++ irqpend = __raw_readl(S3C2410_SRCPND);
++ if (irqpend & SRCPND_TIMER4) {
++ /* re-read the timer, and try and fix up for the missed
++ * interrupt. Note, the interrupt may go off before the
++ * timer has re-loaded from wrapping.
++ */
++
++ tval = __raw_readl(S3C2410_TCNTO(4));
++ tdone = timer_startval - tval;
++
++ if (tval != 0)
++ tdone += timer_startval;
++ }
++
++ return timer_ticks_to_usec(tdone);
++}
++
++
++/*
++ * IRQ handler for the timer
++ */
++static irqreturn_t
++s3c2410_timer_interrupt(int irq, void *dev_id)
++{
++ timer_tick();
++ return IRQ_HANDLED;
++}
++
++static struct irqaction s3c2410_timer_irq = {
++ .name = "S3C2410 Timer Tick",
++ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
++ .handler = s3c2410_timer_interrupt,
++};
++
++#define use_tclk1_12() ( \
++ machine_is_bast() || \
++ machine_is_vr1000() || \
++ machine_is_anubis() || \
++ machine_is_osiris() )
++
++/*
++ * Set up timer interrupt, and return the current time in seconds.
++ *
++ * Currently we only use timer4, as it is the only timer which has no
++ * other function that can be exploited externally
++ */
++static void s3c2410_timer_setup (void)
++{
++ unsigned long tcon;
++ unsigned long tcnt;
++ unsigned long tcfg1;
++ unsigned long tcfg0;
++
++ tcnt = 0xffff; /* default value for tcnt */
++
++ /* read the current timer configuration bits */
++
++ tcon = __raw_readl(S3C2410_TCON);
++ tcfg1 = __raw_readl(S3C2410_TCFG1);
++ tcfg0 = __raw_readl(S3C2410_TCFG0);
++
++ /* configure the system for whichever machine is in use */
++
++ if (use_tclk1_12()) {
++ /* timer is at 12MHz, scaler is 1 */
++ timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
++ tcnt = 12000000 / HZ;
++
++ tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
++ tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
++ } else {
++ /* since values around 50 to
++ * 70MHz are not values we can directly generate the timer
++ * value from, we need to pre-scale and divide before using it.
++ *
++ * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
++ * (8.45 ticks per usec)
++ */
++
++ /* configure clock tick */
++ timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
++ printk("timer_usec_ticks = %lu\n", timer_usec_ticks);
++
++ tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
++ tcfg1 |= S3C2410_TCFG1_MUX4_DIV2;
++
++ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++ tcfg0 |= ((6 - 1) / 2) << S3C2410_TCFG_PRESCALER1_SHIFT;
++
++ tcnt = (pclk / 6) / HZ;
++ }
++
++ /* timers reload after counting zero, so reduce the count by 1 */
++
++ tcnt--;
++
++ printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
++ tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
++
++ /* check to see if timer is within 16bit range... */
++ if (tcnt > 0xffff) {
++ panic("setup_timer: HZ is too small, cannot configure timer!");
++ return;
++ }
++
++ __raw_writel(tcfg1, S3C2410_TCFG1);
++ __raw_writel(tcfg0, S3C2410_TCFG0);
++
++ timer_startval = tcnt;
++ __raw_writel(tcnt, S3C2410_TCNTB(4));
++
++ /* ensure timer is stopped... */
++
++ tcon &= ~(7<<20);
++ tcon |= S3C2410_TCON_T4RELOAD;
++ tcon |= S3C2410_TCON_T4MANUALUPD;
++
++ __raw_writel(tcon, S3C2410_TCON);
++ __raw_writel(tcnt, S3C2410_TCNTB(4));
++ __raw_writel(tcnt, S3C2410_TCMPB(4));
++
++ /* start the timer running */
++ tcon |= S3C2410_TCON_T4START;
++ tcon &= ~S3C2410_TCON_T4MANUALUPD;
++ __raw_writel(tcon, S3C2410_TCON);
++
++ __raw_writel(__raw_readl(S3C2410_INTMSK) & (~(1UL << 14)),
++ S3C2410_INTMSK);
++
++}
++
++struct sys_timer s3c24xx_timer;
++static void timer_resume_work(struct work_struct *work)
++{
++ clk_enable(clk);
++
++#ifdef CONFIG_NO_IDLE_HZ
++ if (s3c24xx_timer.dyn_tick->state & DYN_TICK_ENABLED)
++ s3c24xx_timer.dyn_tick->enable();
++ else
++#endif
++ s3c2410_timer_setup();
++}
++
++static void __init s3c2410_timer_init (void)
++{
++ if (!use_tclk1_12()) {
++ /* for the h1940 (and others), we use the pclk from the core
++ * to generate the timer values.
++ */
++
++ /* this is used as default if no other timer can be found */
++ clk = clk_get(NULL, "timers");
++ if (IS_ERR(clk))
++ panic("failed to get clock for system timer");
++
++ clk_enable(clk);
++
++ pclk = clk_get_rate(clk);
++ printk("pclk = %lu\n", pclk);
++ }
++
++ INIT_WORK(&resume_work, timer_resume_work);
++ s3c2410_timer_setup();
++ setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
++}
++
++static void s3c2410_timer_resume_work(struct work_struct *work)
++{
++ s3c2410_timer_setup();
++}
++
++static void s3c2410_timer_resume(void)
++{
++ static DECLARE_WORK(work, s3c2410_timer_resume_work);
++ int res;
++
++ res = schedule_work(&work);
++ if (!res)
++ printk(KERN_ERR
++ "s3c2410_timer_resume_work already queued ???\n");
++}
++
++#ifdef CONFIG_NO_IDLE_HZ
++/*
++ * We'll set a constant prescaler so we don't have to bother setting it
++ * when reprogramming and so that we avoid costly divisions.
++ *
++ * (2 * HZ) << INPUT_FREQ_SHIFT is the desired frequency after prescaler.
++ * At HZ == 200, HZ * 1024 should work for PCLKs of up to ~53.5 MHz.
++ */
++#define INPUT_FREQ_SHIFT 9
++
++static int ticks_last;
++static int ticks_left;
++static uint32_t tcnto_last;
++
++static inline int s3c24xx_timer_read(void)
++{
++ uint32_t tcnto = __raw_readl(S3C2410_TCNTO(4));
++
++ /*
++ * WARNING: sometimes we get called before TCNTB has been
++ * loaded into the counter and TCNTO then returns its previous
++ * value and kill us, so don't do anything before counter is
++ * reloaded.
++ */
++ if (unlikely(tcnto == tcnto_last))
++ return ticks_last;
++
++ tcnto_last = -1;
++ return tcnto <<
++ ((__raw_readl(S3C2410_TCFG1) >> S3C2410_TCFG1_MUX4_SHIFT) & 3);
++}
++
++static inline void s3c24xx_timer_program(int ticks)
++{
++ uint32_t tcon = __raw_readl(S3C2410_TCON) & ~(7 << 20);
++ uint32_t tcfg1 = __raw_readl(S3C2410_TCFG1) & ~S3C2410_TCFG1_MUX4_MASK;
++
++ /* Just make sure the timer is stopped. */
++ __raw_writel(tcon, S3C2410_TCON);
++
++ /* TODO: add likely()ies / unlikely()ies */
++ if (ticks >> 18) {
++ ticks_last = min(ticks, 0xffff << 3);
++ ticks_left = ticks - ticks_last;
++ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV16, S3C2410_TCFG1);
++ __raw_writel(ticks_last >> 3, S3C2410_TCNTB(4));
++ } else if (ticks >> 17) {
++ ticks_last = ticks;
++ ticks_left = 0;
++ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV8, S3C2410_TCFG1);
++ __raw_writel(ticks_last >> 2, S3C2410_TCNTB(4));
++ } else if (ticks >> 16) {
++ ticks_last = ticks;
++ ticks_left = 0;
++ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV4, S3C2410_TCFG1);
++ __raw_writel(ticks_last >> 1, S3C2410_TCNTB(4));
++ } else {
++ ticks_last = ticks;
++ ticks_left = 0;
++ __raw_writel(tcfg1 | S3C2410_TCFG1_MUX4_DIV2, S3C2410_TCFG1);
++ __raw_writel(ticks_last >> 0, S3C2410_TCNTB(4));
++ }
++
++ tcnto_last = __raw_readl(S3C2410_TCNTO(4));
++ __raw_writel(tcon | S3C2410_TCON_T4MANUALUPD,
++ S3C2410_TCON);
++ __raw_writel(tcon | S3C2410_TCON_T4START,
++ S3C2410_TCON);
++}
++
++/*
++ * If we have already waited all the time we were supposed to wait,
++ * kick the timer, setting the longest allowed timeout value just
++ * for time-keeping.
++ */
++static inline void s3c24xx_timer_program_idle(void)
++{
++ s3c24xx_timer_program(0xffff << 3);
++}
++
++static inline void s3c24xx_timer_update(int restart)
++{
++ int ticks_cur = s3c24xx_timer_read();
++ int jiffies_elapsed = (ticks_last - ticks_cur) >> INPUT_FREQ_SHIFT;
++ int subjiffy = ticks_last - (jiffies_elapsed << INPUT_FREQ_SHIFT);
++
++ if (restart) {
++ if (ticks_left >= (1 << INPUT_FREQ_SHIFT))
++ s3c24xx_timer_program(ticks_left);
++ else
++ s3c24xx_timer_program_idle();
++ ticks_last += subjiffy;
++ } else
++ ticks_last = subjiffy;
++
++ while (jiffies_elapsed --)
++ timer_tick();
++}
++
++/* Called when the timer expires. */
++static irqreturn_t s3c24xx_timer_handler(int irq, void *dev_id)
++{
++ tcnto_last = -1;
++ s3c24xx_timer_update(1);
++
++ return IRQ_HANDLED;
++}
++
++/* Called to update jiffies with time elapsed. */
++static irqreturn_t s3c24xx_timer_handler_dyn_tick(int irq, void *dev_id)
++{
++ s3c24xx_timer_update(0);
++
++ return IRQ_HANDLED;
++}
++
++/*
++ * Programs the next timer interrupt needed. Called when dynamic tick is
++ * enabled, and to reprogram the ticks to skip from pm_idle. The CPU goes
++ * to sleep directly after this.
++ */
++static void s3c24xx_timer_reprogram_dyn_tick(unsigned long next_jiffies)
++{
++ int subjiffy_left = ticks_last - s3c24xx_timer_read();
++
++ s3c24xx_timer_program(max((int) next_jiffies, 1) << INPUT_FREQ_SHIFT);
++ ticks_last += subjiffy_left;
++}
++
++static unsigned long s3c24xx_timer_offset_dyn_tick(void)
++{
++ /* TODO */
++ return 0;
++}
++
++static int s3c24xx_timer_enable_dyn_tick(void)
++{
++ /* Set our constant prescaler. */
++ uint32_t tcfg0 = __raw_readl(S3C2410_TCFG0);
++ int prescaler =
++ max(min(256, (int) pclk / (HZ << (INPUT_FREQ_SHIFT + 1))), 1);
++
++ tcfg0 &= ~S3C2410_TCFG_PRESCALER1_MASK;
++ tcfg0 |= (prescaler - 1) << S3C2410_TCFG_PRESCALER1_SHIFT;
++ __raw_writel(tcfg0, S3C2410_TCFG0);
++
++ /* Override handlers. */
++ s3c2410_timer_irq.handler = s3c24xx_timer_handler;
++ s3c24xx_timer.offset = s3c24xx_timer_offset_dyn_tick;
++
++ printk(KERN_INFO "dyn_tick enabled on s3c24xx timer 4, "
++ "%li Hz pclk with prescaler %i\n", pclk, prescaler);
++
++ s3c24xx_timer_program_idle();
++
++ return 0;
++}
++
++static int s3c24xx_timer_disable_dyn_tick(void)
++{
++ s3c2410_timer_irq.handler = s3c2410_timer_interrupt;
++ s3c24xx_timer.offset = s3c2410_gettimeoffset;
++ s3c2410_timer_setup();
++
++ return 0;
++}
++
++static struct dyn_tick_timer s3c24xx_dyn_tick_timer = {
++ .enable = s3c24xx_timer_enable_dyn_tick,
++ .disable = s3c24xx_timer_disable_dyn_tick,
++ .reprogram = s3c24xx_timer_reprogram_dyn_tick,
++ .handler = s3c24xx_timer_handler_dyn_tick,
++};
++#endif /* CONFIG_NO_IDLE_HZ */
++
++struct sys_timer s3c24xx_timer = {
++ .init = s3c2410_timer_init,
++ .offset = s3c2410_gettimeoffset,
++ .resume = s3c2410_timer_resume,
++#ifdef CONFIG_NO_IDLE_HZ
++ .dyn_tick = &s3c24xx_dyn_tick_timer,
++#endif
++};
+--
+1.5.6.5
+
--- /dev/null
+From 615dc14d7d29e2ff36e1da3cbb421884137bb7eb Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:51:00 +0200
+Subject: [PATCH] 080-nr-tty-devices.patch
+
+---
+ drivers/char/Kconfig | 12 ++++++++++++
+ include/linux/vt.h | 11 +++++++++++
+ 2 files changed, 23 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
+index 6a06913..8e17552 100644
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
+@@ -66,6 +66,18 @@ config VT_CONSOLE
+
+ If unsure, say Y.
+
++config NR_TTY_DEVICES
++ int "Maximum tty device number"
++ depends on VT
++ default 63
++ ---help---
++ This is the highest numbered device created in /dev. You will actually have
++ NR_TTY_DEVICES+1 devices in /dev. The default is 63, which will result in
++ 64 /dev entries. The lowest number you can set is 11, anything below that,
++ and it will default to 11. 63 is also the upper limit so we don't overrun
++ the serial consoles.
++
++
+ config HW_CONSOLE
+ bool
+ depends on VT && !S390 && !UML
+diff --git a/include/linux/vt.h b/include/linux/vt.h
+index 02c1c02..2ba4d21 100644
+--- a/include/linux/vt.h
++++ b/include/linux/vt.h
+@@ -18,8 +18,19 @@ extern int unregister_vt_notifier(struct notifier_block *nb);
+ * resizing).
+ */
+ #define MIN_NR_CONSOLES 1 /* must be at least 1 */
++#if (CONFIG_NR_TTY_DEVICES < 4)
++/* Lower Limit */
++#define MAX_NR_CONSOLES 4 /* serial lines start at 64 */
++#define MAX_NR_USER_CONSOLES 4 /* must be root to allocate above this */
++#elif (CONFIG_NR_TTY_DEVICES > 63)
++/* Upper Limit */
+ #define MAX_NR_CONSOLES 63 /* serial lines start at 64 */
+ #define MAX_NR_USER_CONSOLES 63 /* must be root to allocate above this */
++#else
++/* They chose a sensible number */
++#define MAX_NR_CONSOLES CONFIG_NR_TTY_DEVICES
++#define MAX_NR_USER_CONSOLES CONFIG_NR_TTY_DEVICES
++#endif
+ /* Note: the ioctl VT_GETSTATE does not work for
+ consoles 16 and higher (since it returns a short) */
+
+--
+1.5.6.5
+
--- /dev/null
+From 6d17298d12f873a9b03e5e79ab745fda75bd5b4e Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:51:33 +0200
+Subject: [PATCH] 100-udc-poll-vbus.patch
+
+---
+ arch/arm/plat-s3c24xx/include/plat/udc.h | 1 +
+ drivers/usb/gadget/s3c2410_udc.c | 38 ++++++++++++++++++++++
+ drivers/usb/host/ohci-s3c2410.c | 50 ++++++++++++++++++++++++++++-
+ 3 files changed, 87 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-s3c24xx/include/plat/udc.h
+index 546bb40..763aeba 100644
+--- a/arch/arm/plat-s3c24xx/include/plat/udc.h
++++ b/arch/arm/plat-s3c24xx/include/plat/udc.h
+@@ -27,6 +27,7 @@ enum s3c2410_udc_cmd_e {
+ struct s3c2410_udc_mach_info {
+ void (*udc_command)(enum s3c2410_udc_cmd_e);
+ void (*vbus_draw)(unsigned int ma);
++ int (*get_vbus_status)(void);
+ unsigned int vbus_pin;
+ unsigned char vbus_pin_inverted;
+ };
+diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
+index a9b452f..1c7e5d7 100644
+--- a/drivers/usb/gadget/s3c2410_udc.c
++++ b/drivers/usb/gadget/s3c2410_udc.c
+@@ -73,6 +73,7 @@ static void __iomem *base_addr;
+ static u64 rsrc_start;
+ static u64 rsrc_len;
+ static struct dentry *s3c2410_udc_debugfs_root;
++static struct timer_list vbus_poll_timer;
+
+ static inline u32 udc_read(u32 reg)
+ {
+@@ -133,6 +134,8 @@ static int dprintk(int level, const char *fmt, ...)
+ return 0;
+ }
+ #endif
++
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ static int s3c2410_udc_debugfs_seq_show(struct seq_file *m, void *p)
+ {
+ u32 addr_reg,pwr_reg,ep_int_reg,usb_int_reg;
+@@ -196,6 +199,7 @@ static const struct file_operations s3c2410_udc_debugfs_fops = {
+ .release = single_release,
+ .owner = THIS_MODULE,
+ };
++#endif
+
+ /* io macros */
+
+@@ -842,6 +846,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
+ u32 ep_csr1;
+ u32 idx;
+
++handle_ep_again:
+ if (likely (!list_empty(&ep->queue)))
+ req = list_entry(ep->queue.next,
+ struct s3c2410_request, queue);
+@@ -881,6 +886,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
+
+ if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
+ s3c2410_udc_read_fifo(ep,req);
++ if (s3c2410_udc_fifo_count_out())
++ goto handle_ep_again;
+ }
+ }
+ }
+@@ -1519,6 +1526,20 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev)
+ return IRQ_HANDLED;
+ }
+
++static void s3c2410_udc_vbus_poll(unsigned long _data)
++{
++ struct s3c2410_udc *data = (struct s3c2410_udc *)_data;
++ int v;
++
++ dprintk(DEBUG_NORMAL, "%s()\n", __func__);
++ if (udc_info && udc_info->get_vbus_status) {
++ v = udc_info->get_vbus_status();
++ if ((v > -1) && (v != data->vbus))
++ s3c2410_udc_vbus_session(&data->gadget, v);
++ mod_timer(&vbus_poll_timer, jiffies + msecs_to_jiffies(900));
++ }
++}
++
+ static int s3c2410_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
+ {
+ dprintk(DEBUG_NORMAL, "%s()\n", __func__);
+@@ -1676,6 +1697,11 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+ goto register_error;
+ }
+
++ if (udc_info && udc_info->get_vbus_status && !udc_info->vbus_pin) {
++ mod_timer(&vbus_poll_timer, jiffies + msecs_to_jiffies(50));
++ return 0; /* just return, vbus change will enable udc */
++ }
++
+ /* Enable udc */
+ s3c2410_udc_enable(udc);
+
+@@ -1706,6 +1732,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+ if (driver->disconnect)
+ driver->disconnect(&udc->gadget);
+
++ driver->unbind(&udc->gadget);
+ device_del(&udc->gadget.dev);
+ udc->driver = NULL;
+
+@@ -1892,10 +1919,16 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
+ }
+
+ dev_dbg(dev, "got irq %i\n", irq);
++ } else if (udc_info && udc_info->get_vbus_status) {
++ udc->vbus = 0;
++ init_timer(&vbus_poll_timer);
++ vbus_poll_timer.function = s3c2410_udc_vbus_poll;
++ vbus_poll_timer.data = (unsigned long) udc;
+ } else {
+ udc->vbus = 1;
+ }
+
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ if (s3c2410_udc_debugfs_root) {
+ udc->regs_info = debugfs_create_file("registers", S_IRUGO,
+ s3c2410_udc_debugfs_root,
+@@ -1903,6 +1936,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
+ if (!udc->regs_info)
+ dev_warn(dev, "debugfs file creation failed\n");
+ }
++#endif
+
+ dev_dbg(dev, "probe ok\n");
+
+@@ -1938,6 +1972,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev)
+ if (udc_info && udc_info->vbus_pin > 0) {
+ irq = gpio_to_irq(udc_info->vbus_pin);
+ free_irq(irq, udc);
++ } else if (udc_info && udc_info->get_vbus_status) {
++ del_timer_sync(&vbus_poll_timer);
+ }
+
+ free_irq(IRQ_USBD, udc);
+@@ -2012,12 +2048,14 @@ static int __init udc_init(void)
+
+ dprintk(DEBUG_NORMAL, "%s: version %s\n", gadget_name, DRIVER_VERSION);
+
++#ifdef CONFIG_USB_GADGET_DEBUG_FS
+ s3c2410_udc_debugfs_root = debugfs_create_dir(gadget_name, NULL);
+ if (IS_ERR(s3c2410_udc_debugfs_root)) {
+ printk(KERN_ERR "%s: debugfs dir creation failed %ld\n",
+ gadget_name, PTR_ERR(s3c2410_udc_debugfs_root));
+ s3c2410_udc_debugfs_root = NULL;
+ }
++#endif
+
+ retval = platform_driver_register(&udc_driver_2410);
+ if (retval)
+diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
+index a68af2d..3b85d41 100644
+--- a/drivers/usb/host/ohci-s3c2410.c
++++ b/drivers/usb/host/ohci-s3c2410.c
+@@ -21,6 +21,8 @@
+
+ #include <linux/platform_device.h>
+ #include <linux/clk.h>
++#include <mach/gpio-fns.h>
++#include <mach/regs-gpio.h>
+ #include <plat/usb-control.h>
+
+ #define valid_port(idx) ((idx) == 1 || (idx) == 2)
+@@ -306,6 +308,42 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
+ local_irq_restore(flags);
+ }
+
++/* switching of USB pads */
++static ssize_t show_usb_mode(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ if (__raw_readl(S3C24XX_MISCCR) & S3C2410_MISCCR_USBHOST)
++ return sprintf(buf, "host\n");
++
++ return sprintf(buf, "device\n");
++}
++
++static ssize_t set_usb_mode(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ if (!strncmp(buf, "host", 4)) {
++ printk(KERN_WARNING "s3c2410: changing usb to host\n");
++ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST,
++ S3C2410_MISCCR_USBHOST);
++ /* FIXME:
++ * - call machine-specific disable-pullup function i
++ * - enable +Vbus (if hardware supports it)
++ */
++ s3c2410_gpio_setpin(S3C2410_GPB(9), 0);
++ } else if (!strncmp(buf, "device", 6)) {
++ printk(KERN_WARNING "s3c2410: changing usb to device\n");
++ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST, 0);
++ s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
++ } else {
++ printk(KERN_WARNING "s3c2410: unknown mode\n");
++ return -EINVAL;
++ }
++
++ return count;
++}
++
++static DEVICE_ATTR(usb_mode, S_IRUGO | S_IWUSR, show_usb_mode, set_usb_mode);
++
+ /* may be called without controller electrically present */
+ /* may be called with controller, bus, and devices active */
+
+@@ -486,15 +524,23 @@ static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
+ return 0;
+ }
+
++static int ohci_hcd_s3c2410_drv_resume(struct platform_device *pdev)
++{
++ struct usb_hcd *hcd = platform_get_drvdata(pdev);
++
++ ohci_finish_controller_resume(hcd);
++ return 0;
++}
++
+ static struct platform_driver ohci_hcd_s3c2410_driver = {
+ .probe = ohci_hcd_s3c2410_drv_probe,
+ .remove = ohci_hcd_s3c2410_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ /*.suspend = ohci_hcd_s3c2410_drv_suspend, */
+- /*.resume = ohci_hcd_s3c2410_drv_resume, */
++ .resume = ohci_hcd_s3c2410_drv_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+- .name = "s3c2410-ohci",
++ .name = "s3c-ohci",
+ },
+ };
+
+--
+1.5.6.5
+
--- /dev/null
+From 15f219822a30534756518cd8c4dfade95c4959c2 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Tue, 21 Jul 2009 12:51:57 +0200
+Subject: [PATCH] 110-serial.patch
+
+---
+ drivers/serial/samsung.c | 19 +++++++++++++++++++
+ 1 files changed, 19 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
+index bf0af79..64c35d1 100644
+--- a/drivers/serial/samsung.c
++++ b/drivers/serial/samsung.c
+@@ -1263,6 +1263,13 @@ module_exit(s3c24xx_serial_modexit);
+ #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+ static struct uart_port *cons_uart;
++static int cons_silenced;
++
++void s3c24xx_serial_console_set_silence(int silenced)
++{
++ cons_silenced = silenced;
++}
++EXPORT_SYMBOL(s3c24xx_serial_console_set_silence);
+
+ static int
+ s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
+@@ -1287,9 +1294,21 @@ static void
+ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
+ {
+ unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
++ unsigned int umcon = rd_regl(cons_uart, S3C2410_UMCON);
++
++ if (cons_silenced)
++ return;
++
++ /* If auto HW flow control enabled, temporarily turn it off */
++ if (umcon & S3C2410_UMCOM_AFC)
++ wr_regl(port, S3C2410_UMCON, (umcon & !S3C2410_UMCOM_AFC));
++
+ while (!s3c24xx_serial_console_txrdy(port, ufcon))
+ barrier();
+ wr_regb(cons_uart, S3C2410_UTXH, ch);
++
++ if (umcon & S3C2410_UMCOM_AFC)
++ wr_regl(port, S3C2410_UMCON, umcon);
+ }
+
+ static void
+--
+1.5.6.5
+
--- /dev/null
+diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
+index d84c880..3e79f43 100644
+--- a/drivers/mmc/core/core.c
++++ b/drivers/mmc/core/core.c
+@@ -59,10 +59,11 @@ static int mmc_schedule_delayed_work(struct delayed_work *work,
+ /*
+ * Internal function. Flush all scheduled work from the MMC work queue.
+ */
+-static void mmc_flush_scheduled_work(void)
++void mmc_flush_scheduled_work(void)
+ {
+ flush_workqueue(workqueue);
+ }
++EXPORT_SYMBOL_GPL(mmc_flush_scheduled_work);
+
+ /**
+ * mmc_request_done - finish processing an MMC request
+--- a/include/linux/mmc/core.h
++++ b/include/linux/mmc/core.h
+@@ -129,6 +129,8 @@ struct mmc_request {
+ struct mmc_host;
+ struct mmc_card;
+
++extern void mmc_flush_scheduled_work(void);
++
+ extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
+ extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
+ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 891ef18..fa1889a 100644
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -55,6 +55,18 @@ config MMC_SDHCI_PCI
+
+ If unsure, say N.
+
++config MMC_SDHCI_S3C
++ tristate "SDHCI support on Samsung S3C SoC"
++ depends on MMC_SDHCI && PLAT_S3C24XX
++ help
++ This selects the Secure Digital Host Controller Interface (SDHCI)
++ often referrered to as the HSMMC block in some of the Samsung S3C
++ range of SoC.
++
++ If you have a controller with this interface, say Y or M here.
++
++ If unsure, say N.
++
+ config MMC_RICOH_MMC
+ tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
+ depends on MMC_SDHCI_PCI
+diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
+index f615308..570da2d 100644
+--- a/arch/arm/plat-s3c/include/plat/sdhci.h
++++ b/arch/arm/plat-s3c/include/plat/sdhci.h
+@@ -29,6 +29,7 @@ struct mmc_ios;
+ * is necessary the controllers and/or GPIO blocks require the
+ * changing of driver-strength and other controls dependant on
+ * the card and speed of operation.
++ * sdhci_host: Pointer kept during init, allows presence change notification
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio or
+@@ -45,8 +46,11 @@ struct s3c_sdhci_platdata {
+ void __iomem *regbase,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
++ struct sdhci_host * sdhci_host;
+ };
+
++extern void sdhci_s3c_force_presence_change(struct platform_device *pdev);
++
+ /**
+ * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device.
+ * @pd: Platform data to register to device.
+--- /dev/null
++++ b/arch/arm/mach-s3c2410/include/mach/mci.h
+@@ -0,0 +1,13 @@
++#ifndef _ARCH_MCI_H
++#define _ARCH_MCI_H
++
++struct s3c24xx_mci_pdata {
++ unsigned int gpio_detect;
++ unsigned int gpio_wprotect;
++ unsigned long ocr_avail;
++ unsigned int do_dma;
++ void (*set_power)(unsigned char power_mode,
++ unsigned short vdd);
++};
++
++#endif /* _ARCH_NCI_H */
+diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
+index ac1f7ea..f7f8f31 100644
+--- a/arch/arm/mach-s3c2440/s3c2440.c
++++ b/arch/arm/mach-s3c2440/s3c2440.c
+@@ -46,6 +46,9 @@ int __init s3c2440_init(void)
+ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
+ s3c_device_wdt.resource[1].end = IRQ_S3C2440_WDT;
+
++ /* make sure SD/MMC driver can distinguish 2440 from 2410 */
++ s3c_device_sdi.name = "s3c2440-sdi";
++
+ /* register our system device for everything else */
+
+ return sysdev_register(&s3c2440_sysdev);
+diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
+index 4663bdc..9602d57 100644
+--- a/arch/arm/mach-s3c2442/s3c2442.c
++++ b/arch/arm/mach-s3c2442/s3c2442.c
+@@ -21,6 +21,7 @@
+
+ #include <plat/s3c2442.h>
+ #include <plat/cpu.h>
++#include <plat/devs.h>
+
+ static struct sys_device s3c2442_sysdev = {
+ .cls = &s3c2442_sysclass,
+@@ -30,5 +31,8 @@ int __init s3c2442_init(void)
+ {
+ printk("S3C2442: Initialising architecture\n");
+
++ /* make sure SD/MMC driver can distinguish 2440 from 2410 */
++ s3c_device_sdi.name = "s3c2440-sdi";
++
+ return sysdev_register(&s3c2442_sysdev);
+ }
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index cf153f6..c25f464 100644
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -13,6 +13,7 @@ endif
+ obj-$(CONFIG_MMC_MXC) += mxcmmc.o
+ obj-$(CONFIG_MMC_SDHCI) += sdhci.o
+ obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
++obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
+ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
+ obj-$(CONFIG_MMC_SDHCI_OF) += sdhci-of.o
+ obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
+diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
+index ca1ba3d..7f80047 100644
+--- a/drivers/mmc/host/s3cmci.h
++++ b/drivers/mmc/host/s3cmci.h
+@@ -8,6 +8,10 @@
+ * published by the Free Software Foundation.
+ */
+
++
++#include <mach/regs-sdi.h>
++#include <linux/regulator/consumer.h>
++
+ /* FIXME: DMA Resource management ?! */
+ #define S3CMCI_DMA 0
+
+@@ -68,7 +72,16 @@ struct s3cmci_host {
+ unsigned int ccnt, dcnt;
+ struct tasklet_struct pio_tasklet;
+
++ /*
++ * Here's where we save the registers during suspend. Note that we skip
++ * SDIDATA, which is at different positions on 2410 and 2440, so
++ * there's no "+1" in the array size.
++ */
++ u32 saved[(S3C2410_SDIIMSK-S3C2410_SDICON)/4];
++
+ #ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+ #endif
++
++ struct regulator *regulator;
+ };
+diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
+index 8c08cd7..b3cded4 100644
+--- a/drivers/mmc/host/s3cmci.c
++++ b/drivers/mmc/host/s3cmci.c
+@@ -2,6 +2,7 @@
+ * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver
+ *
+ * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
++ * Copyright (C) 2007 Harald Welte <laforge@gnumonks.org>
+ *
+ * Current driver maintained by Ben Dooks and Simtec Electronics
+ * Copyright (C) 2008 Simtec Electronics <ben-linux@fluff.org>
+@@ -25,9 +26,18 @@
+
+ #include <mach/regs-sdi.h>
+ #include <mach/regs-gpio.h>
++#include <mach/hardware.h>
+
+ #include <plat/mci.h>
+
++#include <asm/dma.h>
++#include <asm/dma-mapping.h>
++
++#include <asm/io.h>
++#include <mach/regs-gpio.h>
++#include <mach/mci.h>
++#include <mach/dma.h>
++
+ #include "s3cmci.h"
+
+ #define DRIVER_NAME "s3c-mci"
+@@ -48,6 +58,9 @@ static const int dbgmap_err = dbg_fail;
+ static const int dbgmap_info = dbg_info | dbg_conf;
+ static const int dbgmap_debug = dbg_err | dbg_debug;
+
++static int f_max = -1; /* override maximum frequency limit */
++static int persist; /* keep interface alive across suspend/resume */
++
+ #define dbg(host, channels, args...) \
+ do { \
+ if (dbgmap_err & channels) \
+@@ -281,8 +294,11 @@ static void do_pio_read(struct s3cmci_host *host)
+ * an even multiple of 4. */
+ if (fifo >= host->pio_bytes)
+ fifo = host->pio_bytes;
+- else
++ else {
+ fifo -= fifo & 3;
++ if (!fifo)
++ break;
++ }
+
+ host->pio_bytes -= fifo;
+ host->pio_count += fifo;
+@@ -330,7 +346,7 @@ static void do_pio_write(struct s3cmci_host *host)
+
+ to_ptr = host->base + host->sdidata;
+
+- while ((fifo = fifo_free(host)) > 3) {
++ while ((fifo = fifo_free(host))) {
+ if (!host->pio_bytes) {
+ res = get_data_buffer(host, &host->pio_bytes,
+ &host->pio_ptr);
+@@ -354,8 +370,11 @@ static void do_pio_write(struct s3cmci_host *host)
+ * words, so round down to an even multiple of 4. */
+ if (fifo >= host->pio_bytes)
+ fifo = host->pio_bytes;
+- else
++ else {
+ fifo -= fifo & 3;
++ if (!fifo)
++ break;
++ }
+
+ host->pio_bytes -= fifo;
+ host->pio_count += fifo;
+@@ -374,7 +393,6 @@ static void pio_tasklet(unsigned long data)
+ {
+ struct s3cmci_host *host = (struct s3cmci_host *) data;
+
+-
+ disable_irq(host->irq);
+
+ if (host->pio_active == XFER_WRITE)
+@@ -615,7 +633,6 @@ irq_out:
+
+ spin_unlock_irqrestore(&host->complete_lock, iflags);
+ return IRQ_HANDLED;
+-
+ }
+
+ /*
+@@ -1027,6 +1044,7 @@ static void s3cmci_send_request(struct mmc_host *mmc)
+ dbg(host, dbg_err, "data prepare error %d\n", res);
+ cmd->error = res;
+ cmd->data->error = res;
++ cmd->data->error = -EIO;
+
+ mmc_request_done(mmc, mrq);
+ return;
+@@ -1264,10 +1282,8 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
+ host->is2440 = is2440;
+
+ host->pdata = pdev->dev.platform_data;
+- if (!host->pdata) {
+- pdev->dev.platform_data = &s3cmci_def_pdata;
++ if (!host->pdata)
+ host->pdata = &s3cmci_def_pdata;
+- }
+
+ spin_lock_init(&host->complete_lock);
+ tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host);
+@@ -1380,6 +1396,18 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
+ mmc->f_min = host->clk_rate / (host->clk_div * 256);
+ mmc->f_max = host->clk_rate / host->clk_div;
+
++ if (f_max >= 0) {
++ unsigned f = f_max;
++
++ if (f < mmc->f_min)
++ f = mmc->f_min;
++ if (mmc->f_max > f) {
++ dev_info(&pdev->dev, "f_max lowered from %u to %u Hz\n",
++ mmc->f_max, f);
++ mmc->f_max = f;
++ }
++ }
++
+ if (host->pdata->ocr_avail)
+ mmc->ocr_avail = host->pdata->ocr_avail;
+
+@@ -1492,18 +1520,60 @@ static int __devinit s3cmci_2440_probe(struct platform_device *dev)
+
+ #ifdef CONFIG_PM
+
++static int save_regs(struct mmc_host *mmc)
++{
++ struct s3cmci_host *host = mmc_priv(mmc);
++ unsigned long flags;
++ unsigned from;
++ u32 *to = host->saved;
++
++ mmc_flush_scheduled_work();
++
++ local_irq_save(flags);
++ for (from = S3C2410_SDICON; from != S3C2410_SDIIMSK+4; from += 4)
++ if (from != host->sdidata)
++ *to++ = readl(host->base + from);
++ BUG_ON(to-host->saved != ARRAY_SIZE(host->saved));
++ local_irq_restore(flags);
++
++ return 0;
++}
++
++static int restore_regs(struct mmc_host *mmc)
++{
++ struct s3cmci_host *host = mmc_priv(mmc);
++ unsigned long flags;
++ unsigned to;
++ u32 *from = host->saved;
++
++ /*
++ * Before we begin with the necromancy, make sure we don't
++ * inadvertently start something we'll regret microseconds later.
++ */
++ from[S3C2410_SDICMDCON - S3C2410_SDICON] = 0;
++
++ local_irq_save(flags);
++ for (to = S3C2410_SDICON; to != S3C2410_SDIIMSK+4; to += 4)
++ if (to != host->sdidata)
++ writel(*from++, host->base + to);
++ BUG_ON(from-host->saved != ARRAY_SIZE(host->saved));
++ local_irq_restore(flags);
++
++ return 0;
++}
++
+ static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+
+- return mmc_suspend_host(mmc, state);
++ return persist ? save_regs(mmc) : mmc_suspend_host(mmc, state);
+ }
+
+ static int s3cmci_resume(struct platform_device *dev)
+ {
+ struct mmc_host *mmc = platform_get_drvdata(dev);
+
+- return mmc_resume_host(mmc);
++ return persist ? restore_regs(mmc) : mmc_resume_host(mmc);
+ }
+
+ #else /* CONFIG_PM */
+@@ -1561,9 +1631,13 @@ static void __exit s3cmci_exit(void)
+ module_init(s3cmci_init);
+ module_exit(s3cmci_exit);
+
++module_param(f_max, int, 0644);
++module_param(persist, int, 0644);
++
+ MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
+ MODULE_LICENSE("GPL v2");
+ MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
+ MODULE_ALIAS("platform:s3c2410-sdi");
+ MODULE_ALIAS("platform:s3c2412-sdi");
+ MODULE_ALIAS("platform:s3c2440-sdi");
++
+
--- /dev/null
+diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
+index 18f9588..fff94e6 100644
+--- a/arch/arm/plat-s3c/include/plat/nand.h
++++ b/arch/arm/plat-s3c/include/plat/nand.h
+@@ -33,6 +33,8 @@ struct s3c2410_nand_set {
+
+ int nr_chips;
+ int nr_partitions;
++ unsigned int flags;
++#define S3C2410_NAND_BBT 0x0001
+ char *name;
+ int *nr_map;
+ struct mtd_partition *partitions;
+@@ -51,6 +53,9 @@ struct s3c2410_platform_nand {
+ int nr_sets;
+ struct s3c2410_nand_set *sets;
+
++ /* force software_ecc at runtime */
++ int software_ecc;
++
+ void (*select_chip)(struct s3c2410_nand_set *,
+ int chip);
+ };
+diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
+index 11dc7e6..59637ac 100644
+--- a/drivers/mtd/nand/s3c2410.c
++++ b/drivers/mtd/nand/s3c2410.c
+@@ -491,7 +491,7 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ if ((diff0 & ~(1<<fls(diff0))) == 0)
+ return 1;
+
+- return -1;
++ return -EBADMSG;
+ }
+
+ /* ECC functions
+@@ -774,9 +783,13 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
+ chip->select_chip = s3c2410_nand_select_chip;
+ chip->chip_delay = 50;
+ chip->priv = nmtd;
+- chip->options = 0;
+ chip->controller = &info->controller;
+
++ if (set->flags & S3C2410_NAND_BBT)
++ chip->options = NAND_USE_FLASH_BBT;
++ else
++ chip->options = 0;
++
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ chip->IO_ADDR_W = regs + S3C2410_NFDATA;
+@@ -816,7 +829,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
+ nmtd->mtd.owner = THIS_MODULE;
+ nmtd->set = set;
+
+- if (hardware_ecc) {
++ if (!info->platform->software_ecc && hardware_ecc) {
+ chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ chip->ecc.correct = s3c2410_nand_correct_data;
+ chip->ecc.mode = NAND_ECC_HW;
+
--- /dev/null
+--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
++++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+@@ -21,7 +21,8 @@ struct s3c2410_spigpio_info {
+ int num_chipselect;
+ int bus_num;
+
+- void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
++ int non_blocking_transfer;
++ void (*chip_select)(struct s3c2410_spigpio_info *spi, int csid, int cs);
+ };
+
+
+--- a/drivers/spi/spi_s3c24xx_gpio.c
++++ b/drivers/spi/spi_s3c24xx_gpio.c
+@@ -92,7 +92,7 @@ static void s3c2410_spigpio_chipselect(s
+ struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+
+ if (sg->info && sg->info->chip_select)
+- (sg->info->chip_select)(sg->info, value);
++ (sg->info->chip_select)(sg->info, dev->chip_select, value);
+ }
+
+ static int s3c2410_spigpio_probe(struct platform_device *dev)
+@@ -113,9 +113,11 @@ static int s3c2410_spigpio_probe(struct
+
+ platform_set_drvdata(dev, sp);
+
+- /* copy in the plkatform data */
++ /* copy in the platform data */
+ info = sp->info = dev->dev.platform_data;
+
++ master->num_chipselect = info->num_chipselect;
++
+ /* setup spi bitbang adaptor */
+ sp->bitbang.master = spi_master_get(master);
+ sp->bitbang.master->bus_num = info->bus_num;
projects / openwrt / staging / lynxis.git / commitdiff