eSDHC: Calculate envaddr accroding to the address format

On BSC9131, BSC9132, P1010 : For High Capacity SD Cards (> 2 GBytes), the
32-bit source address specifies the memory address in block address
format. Block length is fixed to 512 bytes as per the SD High Capacity
specification. So we need to convert the block address format
to byte address format to calculate the envaddr.

If there is no enough space for environment variables or envaddr
is larger than 4GiB, we relocate the envaddr to 0x400. The address
relocated is in the front of the first partition that is assigned
for sdboot only.

Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Reviewed-by: York Sun <yorksun@freescale.com>

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 54ce2f053cc9dc841af29c1efea370bdbe266fc2..be1d9d2a67da3c68f2496741781ccbf115079cbe 100644 (file)
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -152,6 +152,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A005125
 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x10
+#define CONFIG_ESDHC_HC_BLK_ADDR
 
 /* P1011 is single core version of P1020 */
 #elif defined(CONFIG_P1011)
@@ -552,6 +553,7 @@
 #define CONFIG_NAND_FSL_IFC
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ERRATUM_A005125
+#define CONFIG_ESDHC_HC_BLK_ADDR
 
 #elif defined(CONFIG_BSC9132)
 #define CONFIG_MAX_CPUS                        2
@@ -575,6 +577,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A005125
 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x11
+#define CONFIG_ESDHC_HC_BLK_ADDR
 
 #elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
 #define CONFIG_E6500

diff --git a/board/freescale/common/sdhc_boot.c b/board/freescale/common/sdhc_boot.c
index f6e2b2bbd6775d1a1928118246bfdf68e42b2e07..022f38b117f2c945cb6e5eb7e1cea21612631cce 100644 (file)
--- a/board/freescale/common/sdhc_boot.c
+++ b/board/freescale/common/sdhc_boot.c
@@ -16,6 +16,8 @@
 #define ESDHC_BOOT_IMAGE_SIZE  0x48
 #define ESDHC_BOOT_IMAGE_ADDR  0x50
 
+#define ESDHC_DEFAULT_ENVADDR  0x400
+
 int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr)
 {
        u8 *tmp_buf;
@@ -39,6 +41,33 @@ int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr)
        /* Get the code size from offset 0x48 */
        code_len = *(u32 *)(tmp_buf + ESDHC_BOOT_IMAGE_SIZE);
 
+#ifdef CONFIG_ESDHC_HC_BLK_ADDR
+       /*
+        * On soc BSC9131, BSC9132:
+        * In High Capacity SD Cards (> 2 GBytes), the 32-bit source address and
+        * code length of these soc specify the memory address in block address
+        * format. Block length is fixed to 512 bytes as per the SD High
+        * Capacity specification.
+        */
+       u64 tmp;
+
+       if (mmc->high_capacity) {
+               tmp = (u64)code_offset * blklen;
+               tmp += code_len * blklen;
+       } else
+               tmp = code_offset + code_len;
+
+       if ((tmp + CONFIG_ENV_SIZE > mmc->capacity) ||
+                       (tmp > 0xFFFFFFFFU))
+               *env_addr = ESDHC_DEFAULT_ENVADDR;
+       else
+               *env_addr = tmp;
+
+       free(tmp_buf);
+
+       return 0;
+#endif
+
        *env_addr = code_offset + code_len;
 
        free(tmp_buf);