* @alloc: allocate video memory and, optionally, allocator private data,
* return ERR_PTR() on failure or a pointer to allocator private,
* per-buffer data on success; the returned private structure
- * will then be passed as buf_priv argument to other ops in this
+ * will then be passed as @buf_priv argument to other ops in this
* structure. Additional gfp_flags to use when allocating the
* are also passed to this operation. These flags are from the
* gfp_flags field of vb2_queue.
* @put: inform the allocator that the buffer will no longer be used;
* usually will result in the allocator freeing the buffer (if
- * no other users of this buffer are present); the buf_priv
+ * no other users of this buffer are present); the @buf_priv
* argument is the allocator private per-buffer structure
* previously returned from the alloc callback.
* @get_dmabuf: acquire userspace memory for a hardware operation; used for
* videobuf layer when queuing a video buffer of USERPTR type;
* should return an allocator private per-buffer structure
* associated with the buffer on success, ERR_PTR() on failure;
- * the returned private structure will then be passed as buf_priv
+ * the returned private structure will then be passed as @buf_priv
* argument to other ops in this structure.
* @put_userptr: inform the allocator that a USERPTR buffer will no longer
* be used.
* allocator private per-buffer structure on success;
* this needs to be used for further accesses to the buffer.
* @detach_dmabuf: inform the exporter of the buffer that the current DMABUF
- * buffer is no longer used; the buf_priv argument is the
+ * buffer is no longer used; the @buf_priv argument is the
* allocator private per-buffer structure previously returned
* from the attach_dmabuf callback.
* @map_dmabuf: request for access to the dmabuf from allocator; the allocator
*
* #) Required ops for read/write access types: alloc, put, num_users, vaddr.
*
- * #) Required ops for DMABUF types: attach_dmabuf, detach_dmabuf, map_dmabuf, unmap_dmabuf.
+ * #) Required ops for DMABUF types: attach_dmabuf, detach_dmabuf,
+ * map_dmabuf, unmap_dmabuf.
*/
struct vb2_mem_ops {
void *(*alloc)(struct device *dev, unsigned long attrs,
- unsigned long size, enum dma_data_direction dma_dir,
+ unsigned long size,
+ enum dma_data_direction dma_dir,
gfp_t gfp_flags);
void (*put)(void *buf_priv);
struct dma_buf *(*get_dmabuf)(void *buf_priv, unsigned long flags);
void (*prepare)(void *buf_priv);
void (*finish)(void *buf_priv);
- void *(*attach_dmabuf)(struct device *dev, struct dma_buf *dbuf,
+ void *(*attach_dmabuf)(struct device *dev,
+ struct dma_buf *dbuf,
unsigned long size,
enum dma_data_direction dma_dir);
void (*detach_dmabuf)(void *buf_priv);
/**
* struct vb2_ops - driver-specific callbacks
*
- * @queue_setup: called from %VIDIOC_REQBUFS and %VIDIOC_CREATE_BUFS
+ * @queue_setup: called from VIDIOC_REQBUFS() and VIDIOC_CREATE_BUFS()
* handlers before memory allocation. It can be called
* twice: if the original number of requested buffers
* could not be allocated, then it will be called a
* buffer in \*num_planes, the size of each plane should be
* set in the sizes\[\] array and optional per-plane
* allocator specific device in the alloc_devs\[\] array.
- * When called from %VIDIOC_REQBUFS, \*num_planes == 0, the
- * driver has to use the currently configured format to
+ * When called from VIDIOC_REQBUFS,() \*num_planes == 0,
+ * the driver has to use the currently configured format to
* determine the plane sizes and \*num_buffers is the total
* number of buffers that are being allocated. When called
- * from %VIDIOC_CREATE_BUFS, \*num_planes != 0 and it
+ * from VIDIOC_CREATE_BUFS,() \*num_planes != 0 and it
* describes the requested number of planes and sizes\[\]
* contains the requested plane sizes. If either
* \*num_planes or the requested sizes are invalid callback
* initialization failure (return != 0) will prevent
* queue setup from completing successfully; optional.
* @buf_prepare: called every time the buffer is queued from userspace
- * and from the %VIDIOC_PREPARE_BUF ioctl; drivers may
+ * and from the VIDIOC_PREPARE_BUF() ioctl; drivers may
* perform any initialization required before each
* hardware operation in this callback; drivers can
* access/modify the buffer here as it is still synced for
- * the CPU; drivers that support %VIDIOC_CREATE_BUFS must
+ * the CPU; drivers that support VIDIOC_CREATE_BUFS() must
* also validate the buffer size; if an error is returned,
* the buffer will not be queued in driver; optional.
* @buf_finish: called before every dequeue of the buffer back to
* driver can return an error if hardware fails, in that
* case all buffers that have been already given by
* the @buf_queue callback are to be returned by the driver
- * by calling @vb2_buffer_done\(%VB2_BUF_STATE_QUEUED\).
+ * by calling vb2_buffer_done() with %VB2_BUF_STATE_QUEUED.
* If you need a minimum number of buffers before you can
* start streaming, then set @min_buffers_needed in the
* vb2_queue structure. If that is non-zero then
- * start_streaming won't be called until at least that
+ * @start_streaming won't be called until at least that
* many buffers have been queued up by userspace.
* @stop_streaming: called when 'streaming' state must be disabled; driver
* should stop any DMA transactions or wait until they
* finish and give back all buffers it got from &buf_queue
- * callback by calling @vb2_buffer_done\(\) with either
+ * callback by calling vb2_buffer_done() with either
* %VB2_BUF_STATE_DONE or %VB2_BUF_STATE_ERROR; may use
* vb2_wait_for_all_buffers() function
* @buf_queue: passes buffer vb to the driver; driver may start
* hardware operation on this buffer; driver should give
* the buffer back by calling vb2_buffer_done() function;
- * it is allways called after calling %VIDIOC_STREAMON ioctl;
- * might be called before start_streaming callback if user
- * pre-queued buffers before calling %VIDIOC_STREAMON.
+ * it is allways called after calling VIDIOC_STREAMON()
+ * ioctl; might be called before @start_streaming callback
+ * if user pre-queued buffers before calling
+ * VIDIOC_STREAMON().
*/
struct vb2_ops {
int (*queue_setup)(struct vb2_queue *q,
*
* @type: private buffer type whose content is defined by the vb2-core
* caller. For example, for V4L2, it should match
- * the V4L2_BUF_TYPE_* in include/uapi/linux/videodev2.h
+ * the types defined on enum &v4l2_buf_type
* @io_modes: supported io methods (see vb2_io_modes enum)
* @dev: device to use for the default allocation context if the driver
* doesn't fill in the @alloc_devs array.
* Typically this is 0, but it may be e.g. GFP_DMA or __GFP_DMA32
* to force the buffer allocation to a specific memory zone.
* @min_buffers_needed: the minimum number of buffers needed before
- * start_streaming() can be called. Used when a DMA engine
+ * @start_streaming can be called. Used when a DMA engine
* cannot be started unless at least this number of buffers
* have been queued into the driver.
*/
/*
- * Private elements (won't appear at the DocBook):
+ * Private elements (won't appear at the uAPI book):
* @mmap_lock: private mutex used when buffers are allocated/freed/mmapped
* @memory: current memory type used
* @bufs: videobuf buffer structures
* @done_wq: waitqueue for processes waiting for buffers ready to be dequeued
* @alloc_devs: memory type/allocator-specific per-plane device
* @streaming: current streaming state
- * @start_streaming_called: start_streaming() was called successfully and we
+ * @start_streaming_called: @start_streaming was called successfully and we
* started streaming.
* @error: a fatal error occurred on the queue
* @waiting_for_buffers: used in poll() to check if vb2 is still waiting for
/**
* vb2_buffer_done() - inform videobuf that an operation on a buffer is finished
* @vb: vb2_buffer returned from the driver
- * @state: either %VB2_BUF_STATE_DONE if the operation finished successfully,
- * %VB2_BUF_STATE_ERROR if the operation finished with an error or
- * %VB2_BUF_STATE_QUEUED if the driver wants to requeue buffers.
- * If start_streaming fails then it should return buffers with state
- * %VB2_BUF_STATE_QUEUED to put them back into the queue.
+ * @state: either %VB2_BUF_STATE_DONE if the operation finished
+ * successfully, %VB2_BUF_STATE_ERROR if the operation finished
+ * with an error or %VB2_BUF_STATE_QUEUED if the driver wants to
+ * requeue buffers. If start_streaming fails then it should return
+ * buffers with state %VB2_BUF_STATE_QUEUED to put them back into
+ * the queue.
*
* This function should be called by the driver after a hardware operation on
* a buffer is finished and the buffer may be returned to userspace. The driver
* cannot use this buffer anymore until it is queued back to it by videobuf
- * by the means of buf_queue callback. Only buffers previously queued to the
- * driver by buf_queue can be passed to this function.
+ * by the means of &vb2_ops->buf_queue callback. Only buffers previously queued
+ * to the driver by &vb2_ops->buf_queue can be passed to this function.
*
* While streaming a buffer can only be returned in state DONE or ERROR.
* The start_streaming op can also return them in case the DMA engine cannot
* @q: videobuf2 queue
*
* This function will wait until all buffers that have been given to the driver
- * by buf_queue() are given back to vb2 with vb2_buffer_done(). It doesn't call
- * wait_prepare, wait_finish pair. It is intended to be called with all locks
- * taken, for example from stop_streaming() callback.
+ * by &vb2_ops->buf_queue are given back to vb2 with vb2_buffer_done(). It
+ * doesn't call wait_prepare()/wait_finish() pair. It is intended to be called
+ * with all locks taken, for example from &vb2_ops->stop_streaming callback.
*/
int vb2_wait_for_all_buffers(struct vb2_queue *q);
* @count: requested buffer count
*
* Should be called from vidioc_reqbufs ioctl handler of a driver.
+ *
* This function:
- * 1) verifies streaming parameters passed from the userspace,
- * 2) sets up the queue,
- * 3) negotiates number of buffers and planes per buffer with the driver
+ *
+ * #) verifies streaming parameters passed from the userspace,
+ * #) sets up the queue,
+ * #) negotiates number of buffers and planes per buffer with the driver
* to be used during streaming,
- * 4) allocates internal buffer structures (struct vb2_buffer), according to
+ * #) allocates internal buffer structures (struct vb2_buffer), according to
* the agreed parameters,
- * 5) for MMAP memory type, allocates actual video memory, using the
+ * #) for MMAP memory type, allocates actual video memory, using the
* memory handling/allocation routines provided during queue initialization
*
* If req->count is 0, all the memory will be freed instead.
* @q: videobuf2 queue
* @memory: memory type
* @count: requested buffer count
- * @parg: parameter passed to device driver
+ * @requested_planes: number of planes requested
+ * @requested_sizes: array with the size of the planes
*
- * Should be called from vidioc_create_bufs ioctl handler of a driver.
+ * Should be called from VIDIOC_CREATE_BUFS() ioctl handler of a driver.
* This function:
- * 1) verifies parameter sanity
- * 2) calls the .queue_setup() queue operation
- * 3) performs any necessary memory allocations
*
- * The return values from this function are intended to be directly returned
- * from vidioc_create_bufs handler in driver.
+ * #) verifies parameter sanity
+ * #) calls the .queue_setup() queue operation
+ * #) performs any necessary memory allocations
+ *
+ * Return: the return values from this function are intended to be directly
+ * returned from VIDIOC_CREATE_BUFS() handler in driver.
*/
int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
- unsigned int *count, unsigned requested_planes,
- const unsigned int requested_sizes[]);
+ unsigned int *count, unsigned int requested_planes,
+ const unsigned int requested_sizes[]);
/**
* vb2_core_prepare_buf() - Pass ownership of a buffer from userspace
/**
* vb2_core_qbuf() - Queue a buffer from userspace
+ *
* @q: videobuf2 queue
* @index: id number of the buffer
* @pb: buffer structure passed from userspace to vidioc_qbuf handler
*
* Should be called from vidioc_qbuf ioctl handler of a driver.
* The passed buffer should have been verified.
+ *
* This function:
- * 1) if necessary, calls buf_prepare callback in the driver (if provided), in
+ *
+ * #) if necessary, calls buf_prepare callback in the driver (if provided), in
* which driver-specific buffer initialization can be performed,
- * 2) if streaming is on, queues the buffer in driver by the means of buf_queue
- * callback for processing.
+ * #) if streaming is on, queues the buffer in driver by the means of
+ * &vb2_ops->buf_queue callback for processing.
*
* The return values from this function are intended to be directly returned
* from vidioc_qbuf handler in driver.
*
* Should be called from vidioc_dqbuf ioctl handler of a driver.
* The passed buffer should have been verified.
+ *
* This function:
- * 1) calls buf_finish callback in the driver (if provided), in which
+ *
+ * #) calls buf_finish callback in the driver (if provided), in which
* driver can perform any additional operations that may be required before
* returning the buffer to userspace, such as cache sync,
- * 2) the buffer struct members are filled with relevant information for
+ * #) the buffer struct members are filled with relevant information for
* the userspace.
*
* The return values from this function are intended to be directly returned
* from the mmap handler in driver.
*/
int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma);
+
#ifndef CONFIG_MMU
unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
unsigned long addr,
* from poll handler in driver.
*/
unsigned int vb2_core_poll(struct vb2_queue *q, struct file *file,
- poll_table *wait);
+ poll_table *wait);
+
size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
loff_t *ppos, int nonblock);
size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count,
loff_t *ppos, int nonblock);
-/*
- * vb2_thread_fnc - callback function for use with vb2_thread
+/**
+ * typedef vb2_thread_fnc - callback function for use with vb2_thread
+ *
+ * @vb: pointer to struct &vb2_buffer
+ * @priv: pointer to a private pointer
*
* This is called whenever a buffer is dequeued in the thread.
*/
* This starts a thread that will queue and dequeue until an error occurs
* or @vb2_thread_stop is called.
*
- * This function should not be used for anything else but the videobuf2-dvb
- * support. If you think you have another good use-case for this, then please
- * contact the linux-media mailinglist first.
+ * .. attention::
+ *
+ * This function should not be used for anything else but the videobuf2-dvb
+ * support. If you think you have another good use-case for this, then please
+ * contact the linux-media mailing list first.
*/
int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv,
const char *thread_name);
/**
* vb2_verify_memory_type() - Check whether the memory type and buffer type
* passed to a buffer operation are compatible with the queue.
+ *
+ * @q: videobuf queue
+ * @memory: memory model, as defined by enum &vb2_memory.
+ * @type: private buffer type whose content is defined by the vb2-core
+ * caller. For example, for V4L2, it should match
+ * the types defined on enum &v4l2_buf_type
*/
int vb2_verify_memory_type(struct vb2_queue *q,
enum vb2_memory memory, unsigned int type);
projects / openwrt / staging / blogic.git / commitdiff