bit12 in fw_cap_info is for testing only.
Remove all related code.
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
config_bands |= BAND_GN;
-
- if (params->chandef.width > NL80211_CHAN_WIDTH_40)
- config_bands |= BAND_GAC;
} else {
bss_cfg->band_cfg = BAND_CONFIG_A;
config_bands = BAND_A;
break;
case BAND_G:
case BAND_G | BAND_GN:
- case BAND_G | BAND_GN | BAND_GAC:
dev_dbg(adapter->dev, "info: infra band=%d "
"supported_rates_g\n", adapter->config_bands);
k = mwifiex_copy_rates(rates, k, supported_rates_g,
case BAND_A | BAND_B:
case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN:
case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN | BAND_AAC:
- case BAND_A | BAND_B | BAND_G | BAND_GN | BAND_AN |
- BAND_AAC | BAND_GAC:
case BAND_B | BAND_G | BAND_GN:
- case BAND_B | BAND_G | BAND_GN | BAND_GAC:
dev_dbg(adapter->dev, "info: infra band=%d "
"supported_rates_bg\n", adapter->config_bands);
k = mwifiex_copy_rates(rates, k, supported_rates_bg,
sizeof(supported_rates_a));
break;
case BAND_GN:
- case BAND_GN | BAND_GAC:
dev_dbg(adapter->dev, "info: infra band=%d "
"supported_rates_n\n", adapter->config_bands);
k = mwifiex_copy_rates(rates, k, supported_rates_n,
#define HOSTCMD_SUPPORTED_RATES 14
#define N_SUPPORTED_RATES 3
#define ALL_802_11_BANDS (BAND_A | BAND_B | BAND_G | BAND_GN | \
- BAND_AN | BAND_GAC | BAND_AAC)
+ BAND_AN | BAND_AAC)
#define FW_MULTI_BANDS_SUPPORT (BIT(8) | BIT(9) | BIT(10) | BIT(11) | \
- BIT(12) | BIT(13))
+ BIT(13))
#define IS_SUPPORT_MULTI_BANDS(adapter) \
(adapter->fw_cap_info & FW_MULTI_BANDS_SUPPORT)
-/* shift bit 12 and bit 13 in fw_cap_info from the firmware to bit 13 and 14
- * for 11ac so that bit 11 is for GN, bit 12 for AN, bit 13 for GAC, and bit
- * bit 14 for AAC, in order to be compatible with the band capability
- * defined in the driver after right shift of 8 bits.
+/* bit 13: 11ac BAND_AAC
+ * bit 12: reserved for lab testing, will be reused for BAND_AN
+ * bit 11: 11n BAND_GN
+ * bit 10: 11a BAND_A
+ * bit 9: 11g BAND_G
+ * bit 8: 11b BAND_B
+ * Map these bits to band capability by right shifting 8 bits.
*/
#define GET_FW_DEFAULT_BANDS(adapter) \
- (((((adapter->fw_cap_info & 0x3000) << 1) | \
- (adapter->fw_cap_info & ~0xF000)) >> 8) & \
+ (((adapter->fw_cap_info & 0x2f00) >> 8) & \
ALL_802_11_BANDS)
#define HostCmd_WEP_KEY_INDEX_MASK 0x3fff
/* HW_SPEC fw_cap_info */
-#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & (BIT(12)|BIT(13)))
+#define ISSUPP_11ACENABLED(fw_cap_info) (fw_cap_info & BIT(13))
#define GET_VHTCAP_CHWDSET(vht_cap_info) ((vht_cap_info >> 2) & 0x3)
#define GET_VHTNSSMCS(mcs_mapset, nss) ((mcs_mapset >> (2 * (nss - 1))) & 0x3)
BAND_A = 4,
BAND_GN = 8,
BAND_AN = 16,
- BAND_GAC = 32,
- BAND_AAC = 64,
+ BAND_AAC = 32,
};
#define MWIFIEX_WPA_PASSHPHRASE_LEN 64
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
!bss_desc->disable_11n && !bss_desc->disable_11ac &&
- (priv->adapter->config_bands & BAND_GAC ||
- priv->adapter->config_bands & BAND_AAC))
+ priv->adapter->config_bands & BAND_AAC)
mwifiex_cmd_append_11ac_tlv(priv, bss_desc, &pos);
/* Append vendor specific IE TLV */
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
!bss_desc->disable_11n && !bss_desc->disable_11ac &&
- (priv->adapter->config_bands & BAND_GAC ||
- priv->adapter->config_bands & BAND_AAC))
+ priv->adapter->config_bands & BAND_AAC)
mwifiex_set_11ac_ba_params(priv);
else
mwifiex_set_ba_params(priv);
priv->curr_bss_params.band);
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
- (priv->adapter->config_bands & BAND_GAC ||
- priv->adapter->config_bands & BAND_AAC))
+ priv->adapter->config_bands & BAND_AAC)
mwifiex_set_11ac_ba_params(priv);
else
mwifiex_set_ba_params(priv);
if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info) &&
!bss_desc->disable_11n && !bss_desc->disable_11ac &&
- (priv->adapter->config_bands & BAND_GAC ||
- priv->adapter->config_bands & BAND_AAC))
+ priv->adapter->config_bands & BAND_AAC)
mwifiex_set_11ac_ba_params(priv);
else
mwifiex_set_ba_params(priv);
if (mwifiex_band_to_radio_type(bss_desc->bss_band) ==
HostCmd_SCAN_RADIO_TYPE_BG)
- config_bands = BAND_B | BAND_G | BAND_GN | BAND_GAC;
+ config_bands = BAND_B | BAND_G | BAND_GN;
else
config_bands = BAND_A | BAND_AN | BAND_AAC;