F: drivers/iio/light/cm*
F: Documentation/devicetree/bindings/i2c/trivial-devices.txt
+CAVIUM LIQUIDIO NETWORK DRIVER
+M: Derek Chickles <derek.chickles@caviumnetworks.com>
+M: Satanand Burla <satananda.burla@caviumnetworks.com>
+M: Felix Manlunas <felix.manlunas@caviumnetworks.com>
+M: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
+L: netdev@vger.kernel.org
+W: http://www.cavium.com
+S: Supported
+F: drivers/net/ethernet/cavium/
+F: drivers/net/ethernet/cavium/liquidio/
+
CC2520 IEEE-802.15.4 RADIO DRIVER
M: Varka Bhadram <varkabhadram@gmail.com>
L: linux-wpan@vger.kernel.org
config NET_VENDOR_CAVIUM
tristate "Cavium ethernet drivers"
- depends on PCI && 64BIT
+ depends on PCI
+ default y
---help---
- Enable support for the Cavium ThunderX Network Interface
- Controller (NIC). The NIC provides the controller and DMA
- engines to move network traffic to/from the memory. The NIC
- works closely with TNS, BGX and SerDes to implement the
- functions replacing and virtualizing those of a typical
- standalone PCIe NIC chip.
+ Select this option if you want enable Cavium network support.
- If you have a Cavium Thunder board, say Y.
+ If you have a Cavium SoC or network adapter, say Y.
if NET_VENDOR_CAVIUM
config THUNDER_NIC_PF
tristate "Thunder Physical function driver"
- default NET_VENDOR_CAVIUM
+ depends on 64BIT
+ default ARCH_THUNDER
select THUNDER_NIC_BGX
---help---
This driver supports Thunder's NIC physical function.
+ The NIC provides the controller and DMA engines to
+ move network traffic to/from the memory. The NIC
+ works closely with TNS, BGX and SerDes to implement the
+ functions replacing and virtualizing those of a typical
+ standalone PCIe NIC chip.
config THUNDER_NIC_VF
tristate "Thunder Virtual function driver"
- default NET_VENDOR_CAVIUM
+ depends on 64BIT
+ default ARCH_THUNDER
---help---
This driver supports Thunder's NIC virtual function
config THUNDER_NIC_BGX
tristate "Thunder MAC interface driver (BGX)"
- default NET_VENDOR_CAVIUM
+ depends on 64BIT
+ default ARCH_THUNDER
---help---
This driver supports programming and controlling of MAC
interface from NIC physical function driver.
+config LIQUIDIO
+ tristate "Cavium LiquidIO support"
+ select PTP_1588_CLOCK
+ select FW_LOADER
+ select LIBCRC32
+ ---help---
+ This driver supports Cavium LiquidIO Intelligent Server Adapters
+ based on CN66XX and CN68XX chips.
+
+ To compile this driver as a module, choose M here: the module
+ will be called liquidio. This is recommended.
+
endif # NET_VENDOR_CAVIUM
#
# Makefile for the Cavium ethernet device drivers.
#
-
obj-$(CONFIG_NET_VENDOR_CAVIUM) += thunder/
+obj-$(CONFIG_NET_VENDOR_CAVIUM) += liquidio/
--- /dev/null
+#
+# Cavium Liquidio ethernet device driver
+#
+obj-$(CONFIG_LIQUIDIO) += liquidio.o
+
+liquidio-objs := lio_main.o \
+ lio_ethtool.o \
+ request_manager.o \
+ response_manager.o \
+ octeon_device.o \
+ cn66xx_device.o \
+ cn68xx_device.o \
+ octeon_mem_ops.o \
+ octeon_droq.o \
+ octeon_console.o \
+ octeon_nic.o
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "liquidio_image.h"
+#include "octeon_mem_ops.h"
+
+int lio_cn6xxx_soft_reset(struct octeon_device *oct)
+{
+ octeon_write_csr64(oct, CN6XXX_WIN_WR_MASK_REG, 0xFF);
+
+ dev_dbg(&oct->pci_dev->dev, "BIST enabled for soft reset\n");
+
+ lio_pci_writeq(oct, 1, CN6XXX_CIU_SOFT_BIST);
+ octeon_write_csr64(oct, CN6XXX_SLI_SCRATCH1, 0x1234ULL);
+
+ lio_pci_readq(oct, CN6XXX_CIU_SOFT_RST);
+ lio_pci_writeq(oct, 1, CN6XXX_CIU_SOFT_RST);
+
+ /* make sure that the reset is written before starting timer */
+ mmiowb();
+
+ /* Wait for 10ms as Octeon resets. */
+ mdelay(100);
+
+ if (octeon_read_csr64(oct, CN6XXX_SLI_SCRATCH1) == 0x1234ULL) {
+ dev_err(&oct->pci_dev->dev, "Soft reset failed\n");
+ return 1;
+ }
+
+ dev_dbg(&oct->pci_dev->dev, "Reset completed\n");
+ octeon_write_csr64(oct, CN6XXX_WIN_WR_MASK_REG, 0xFF);
+
+ return 0;
+}
+
+void lio_cn6xxx_enable_error_reporting(struct octeon_device *oct)
+{
+ u32 val;
+
+ pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, &val);
+ if (val & 0x000f0000) {
+ dev_err(&oct->pci_dev->dev, "PCI-E Link error detected: 0x%08x\n",
+ val & 0x000f0000);
+ }
+
+ val |= 0xf; /* Enable Link error reporting */
+
+ dev_dbg(&oct->pci_dev->dev, "Enabling PCI-E error reporting..\n");
+ pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, val);
+}
+
+void lio_cn6xxx_setup_pcie_mps(struct octeon_device *oct,
+ enum octeon_pcie_mps mps)
+{
+ u32 val;
+ u64 r64;
+
+ /* Read config register for MPS */
+ pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, &val);
+
+ if (mps == PCIE_MPS_DEFAULT) {
+ mps = ((val & (0x7 << 5)) >> 5);
+ } else {
+ val &= ~(0x7 << 5); /* Turn off any MPS bits */
+ val |= (mps << 5); /* Set MPS */
+ pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, val);
+ }
+
+ /* Set MPS in DPI_SLI_PRT0_CFG to the same value. */
+ r64 = lio_pci_readq(oct, CN6XXX_DPI_SLI_PRTX_CFG(oct->pcie_port));
+ r64 |= (mps << 4);
+ lio_pci_writeq(oct, r64, CN6XXX_DPI_SLI_PRTX_CFG(oct->pcie_port));
+}
+
+void lio_cn6xxx_setup_pcie_mrrs(struct octeon_device *oct,
+ enum octeon_pcie_mrrs mrrs)
+{
+ u32 val;
+ u64 r64;
+
+ /* Read config register for MRRS */
+ pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, &val);
+
+ if (mrrs == PCIE_MRRS_DEFAULT) {
+ mrrs = ((val & (0x7 << 12)) >> 12);
+ } else {
+ val &= ~(0x7 << 12); /* Turn off any MRRS bits */
+ val |= (mrrs << 12); /* Set MRRS */
+ pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_DEVCTL, val);
+ }
+
+ /* Set MRRS in SLI_S2M_PORT0_CTL to the same value. */
+ r64 = octeon_read_csr64(oct, CN6XXX_SLI_S2M_PORTX_CTL(oct->pcie_port));
+ r64 |= mrrs;
+ octeon_write_csr64(oct, CN6XXX_SLI_S2M_PORTX_CTL(oct->pcie_port), r64);
+
+ /* Set MRRS in DPI_SLI_PRT0_CFG to the same value. */
+ r64 = lio_pci_readq(oct, CN6XXX_DPI_SLI_PRTX_CFG(oct->pcie_port));
+ r64 |= mrrs;
+ lio_pci_writeq(oct, r64, CN6XXX_DPI_SLI_PRTX_CFG(oct->pcie_port));
+}
+
+u32 lio_cn6xxx_coprocessor_clock(struct octeon_device *oct)
+{
+ /* Bits 29:24 of MIO_RST_BOOT holds the ref. clock multiplier
+ * for SLI.
+ */
+ return ((lio_pci_readq(oct, CN6XXX_MIO_RST_BOOT) >> 24) & 0x3f) * 50;
+}
+
+u32 lio_cn6xxx_get_oq_ticks(struct octeon_device *oct,
+ u32 time_intr_in_us)
+{
+ /* This gives the SLI clock per microsec */
+ u32 oqticks_per_us = lio_cn6xxx_coprocessor_clock(oct);
+
+ /* core clock per us / oq ticks will be fractional. TO avoid that
+ * we use the method below.
+ */
+
+ /* This gives the clock cycles per millisecond */
+ oqticks_per_us *= 1000;
+
+ /* This gives the oq ticks (1024 core clock cycles) per millisecond */
+ oqticks_per_us /= 1024;
+
+ /* time_intr is in microseconds. The next 2 steps gives the oq ticks
+ * corressponding to time_intr.
+ */
+ oqticks_per_us *= time_intr_in_us;
+ oqticks_per_us /= 1000;
+
+ return oqticks_per_us;
+}
+
+void lio_cn6xxx_setup_global_input_regs(struct octeon_device *oct)
+{
+ /* Select Round-Robin Arb, ES, RO, NS for Input Queues */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_INPUT_CONTROL,
+ CN6XXX_INPUT_CTL_MASK);
+
+ /* Instruction Read Size - Max 4 instructions per PCIE Read */
+ octeon_write_csr64(oct, CN6XXX_SLI_PKT_INSTR_RD_SIZE,
+ 0xFFFFFFFFFFFFFFFFULL);
+
+ /* Select PCIE Port for all Input rings. */
+ octeon_write_csr64(oct, CN6XXX_SLI_IN_PCIE_PORT,
+ (oct->pcie_port * 0x5555555555555555ULL));
+}
+
+static void lio_cn66xx_setup_pkt_ctl_regs(struct octeon_device *oct)
+{
+ u64 pktctl;
+
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
+
+ pktctl = octeon_read_csr64(oct, CN6XXX_SLI_PKT_CTL);
+
+ /* 66XX SPECIFIC */
+ if (CFG_GET_OQ_MAX_Q(cn6xxx->conf) <= 4)
+ /* Disable RING_EN if only upto 4 rings are used. */
+ pktctl &= ~(1 << 4);
+ else
+ pktctl |= (1 << 4);
+
+ if (CFG_GET_IS_SLI_BP_ON(cn6xxx->conf))
+ pktctl |= 0xF;
+ else
+ /* Disable per-port backpressure. */
+ pktctl &= ~0xF;
+ octeon_write_csr64(oct, CN6XXX_SLI_PKT_CTL, pktctl);
+}
+
+void lio_cn6xxx_setup_global_output_regs(struct octeon_device *oct)
+{
+ u32 time_threshold;
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
+
+ /* / Select PCI-E Port for all Output queues */
+ octeon_write_csr64(oct, CN6XXX_SLI_PKT_PCIE_PORT64,
+ (oct->pcie_port * 0x5555555555555555ULL));
+
+ if (CFG_GET_IS_SLI_BP_ON(cn6xxx->conf)) {
+ octeon_write_csr64(oct, CN6XXX_SLI_OQ_WMARK, 32);
+ } else {
+ /* / Set Output queue watermark to 0 to disable backpressure */
+ octeon_write_csr64(oct, CN6XXX_SLI_OQ_WMARK, 0);
+ }
+
+ /* / Select Info Ptr for length & data */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_IPTR, 0xFFFFFFFF);
+
+ /* / Select Packet count instead of bytes for SLI_PKTi_CNTS[CNT] */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_BMODE, 0);
+
+ /* / Select ES,RO,NS setting from register for Output Queue Packet
+ * Address
+ */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_DPADDR, 0xFFFFFFFF);
+
+ /* No Relaxed Ordering, No Snoop, 64-bit swap for Output
+ * Queue ScatterList
+ */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_SLIST_ROR, 0);
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_SLIST_NS, 0);
+
+ /* / ENDIAN_SPECIFIC CHANGES - 0 works for LE. */
+#ifdef __BIG_ENDIAN_BITFIELD
+ octeon_write_csr64(oct, CN6XXX_SLI_PKT_SLIST_ES64,
+ 0x5555555555555555ULL);
+#else
+ octeon_write_csr64(oct, CN6XXX_SLI_PKT_SLIST_ES64, 0ULL);
+#endif
+
+ /* / No Relaxed Ordering, No Snoop, 64-bit swap for Output Queue Data */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_DATA_OUT_ROR, 0);
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_DATA_OUT_NS, 0);
+ octeon_write_csr64(oct, CN6XXX_SLI_PKT_DATA_OUT_ES64,
+ 0x5555555555555555ULL);
+
+ /* / Set up interrupt packet and time threshold */
+ octeon_write_csr(oct, CN6XXX_SLI_OQ_INT_LEVEL_PKTS,
+ (u32)CFG_GET_OQ_INTR_PKT(cn6xxx->conf));
+ time_threshold =
+ lio_cn6xxx_get_oq_ticks(oct, (u32)
+ CFG_GET_OQ_INTR_TIME(cn6xxx->conf));
+
+ octeon_write_csr(oct, CN6XXX_SLI_OQ_INT_LEVEL_TIME, time_threshold);
+}
+
+static int lio_cn6xxx_setup_device_regs(struct octeon_device *oct)
+{
+ lio_cn6xxx_setup_pcie_mps(oct, PCIE_MPS_DEFAULT);
+ lio_cn6xxx_setup_pcie_mrrs(oct, PCIE_MRRS_512B);
+ lio_cn6xxx_enable_error_reporting(oct);
+
+ lio_cn6xxx_setup_global_input_regs(oct);
+ lio_cn66xx_setup_pkt_ctl_regs(oct);
+ lio_cn6xxx_setup_global_output_regs(oct);
+
+ /* Default error timeout value should be 0x200000 to avoid host hang
+ * when reads invalid register
+ */
+ octeon_write_csr64(oct, CN6XXX_SLI_WINDOW_CTL, 0x200000ULL);
+ return 0;
+}
+
+void lio_cn6xxx_setup_iq_regs(struct octeon_device *oct, u32 iq_no)
+{
+ struct octeon_instr_queue *iq = oct->instr_queue[iq_no];
+
+ /* Disable Packet-by-Packet mode; No Parse Mode or Skip length */
+ octeon_write_csr64(oct, CN6XXX_SLI_IQ_PKT_INSTR_HDR64(iq_no), 0);
+
+ /* Write the start of the input queue's ring and its size */
+ octeon_write_csr64(oct, CN6XXX_SLI_IQ_BASE_ADDR64(iq_no),
+ iq->base_addr_dma);
+ octeon_write_csr(oct, CN6XXX_SLI_IQ_SIZE(iq_no), iq->max_count);
+
+ /* Remember the doorbell & instruction count register addr for this
+ * queue
+ */
+ iq->doorbell_reg = oct->mmio[0].hw_addr + CN6XXX_SLI_IQ_DOORBELL(iq_no);
+ iq->inst_cnt_reg = oct->mmio[0].hw_addr
+ + CN6XXX_SLI_IQ_INSTR_COUNT(iq_no);
+ dev_dbg(&oct->pci_dev->dev, "InstQ[%d]:dbell reg @ 0x%p instcnt_reg @ 0x%p\n",
+ iq_no, iq->doorbell_reg, iq->inst_cnt_reg);
+
+ /* Store the current instruction counter
+ * (used in flush_iq calculation)
+ */
+ iq->reset_instr_cnt = readl(iq->inst_cnt_reg);
+}
+
+static void lio_cn66xx_setup_iq_regs(struct octeon_device *oct, u32 iq_no)
+{
+ lio_cn6xxx_setup_iq_regs(oct, iq_no);
+
+ /* Backpressure for this queue - WMARK set to all F's. This effectively
+ * disables the backpressure mechanism.
+ */
+ octeon_write_csr64(oct, CN66XX_SLI_IQ_BP64(iq_no),
+ (0xFFFFFFFFULL << 32));
+}
+
+void lio_cn6xxx_setup_oq_regs(struct octeon_device *oct, u32 oq_no)
+{
+ u32 intr;
+ struct octeon_droq *droq = oct->droq[oq_no];
+
+ octeon_write_csr64(oct, CN6XXX_SLI_OQ_BASE_ADDR64(oq_no),
+ droq->desc_ring_dma);
+ octeon_write_csr(oct, CN6XXX_SLI_OQ_SIZE(oq_no), droq->max_count);
+
+ octeon_write_csr(oct, CN6XXX_SLI_OQ_BUFF_INFO_SIZE(oq_no),
+ (droq->buffer_size | (OCT_RH_SIZE << 16)));
+
+ /* Get the mapped address of the pkt_sent and pkts_credit regs */
+ droq->pkts_sent_reg =
+ oct->mmio[0].hw_addr + CN6XXX_SLI_OQ_PKTS_SENT(oq_no);
+ droq->pkts_credit_reg =
+ oct->mmio[0].hw_addr + CN6XXX_SLI_OQ_PKTS_CREDIT(oq_no);
+
+ /* Enable this output queue to generate Packet Timer Interrupt */
+ intr = octeon_read_csr(oct, CN6XXX_SLI_PKT_TIME_INT_ENB);
+ intr |= (1 << oq_no);
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_TIME_INT_ENB, intr);
+
+ /* Enable this output queue to generate Packet Timer Interrupt */
+ intr = octeon_read_csr(oct, CN6XXX_SLI_PKT_CNT_INT_ENB);
+ intr |= (1 << oq_no);
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_CNT_INT_ENB, intr);
+}
+
+void lio_cn6xxx_enable_io_queues(struct octeon_device *oct)
+{
+ u32 mask;
+
+ mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_INSTR_SIZE);
+ mask |= oct->io_qmask.iq64B;
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_SIZE, mask);
+
+ mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB);
+ mask |= oct->io_qmask.iq;
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, mask);
+
+ mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_OUT_ENB);
+ mask |= oct->io_qmask.oq;
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, mask);
+}
+
+void lio_cn6xxx_disable_io_queues(struct octeon_device *oct)
+{
+ u32 mask, i, loop = HZ;
+ u32 d32;
+
+ /* Reset the Enable bits for Input Queues. */
+ mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB);
+ mask ^= oct->io_qmask.iq;
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, mask);
+
+ /* Wait until hardware indicates that the queues are out of reset. */
+ mask = oct->io_qmask.iq;
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_PORT_IN_RST_IQ);
+ while (((d32 & mask) != mask) && loop--) {
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_PORT_IN_RST_IQ);
+ schedule_timeout_uninterruptible(1);
+ }
+
+ /* Reset the doorbell register for each Input queue. */
+ for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
+ if (!(oct->io_qmask.iq & (1UL << i)))
+ continue;
+ octeon_write_csr(oct, CN6XXX_SLI_IQ_DOORBELL(i), 0xFFFFFFFF);
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_IQ_DOORBELL(i));
+ }
+
+ /* Reset the Enable bits for Output Queues. */
+ mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_OUT_ENB);
+ mask ^= oct->io_qmask.oq;
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, mask);
+
+ /* Wait until hardware indicates that the queues are out of reset. */
+ loop = HZ;
+ mask = oct->io_qmask.oq;
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_PORT_IN_RST_OQ);
+ while (((d32 & mask) != mask) && loop--) {
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_PORT_IN_RST_OQ);
+ schedule_timeout_uninterruptible(1);
+ }
+ ;
+
+ /* Reset the doorbell register for each Output queue. */
+ /* for (i = 0; i < oct->num_oqs; i++) { */
+ for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
+ if (!(oct->io_qmask.oq & (1UL << i)))
+ continue;
+ octeon_write_csr(oct, CN6XXX_SLI_OQ_PKTS_CREDIT(i), 0xFFFFFFFF);
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_OQ_PKTS_CREDIT(i));
+
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_OQ_PKTS_SENT(i));
+ octeon_write_csr(oct, CN6XXX_SLI_OQ_PKTS_SENT(i), d32);
+ }
+
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_PKT_CNT_INT);
+ if (d32)
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_CNT_INT, d32);
+
+ d32 = octeon_read_csr(oct, CN6XXX_SLI_PKT_TIME_INT);
+ if (d32)
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_TIME_INT, d32);
+}
+
+void lio_cn6xxx_reinit_regs(struct octeon_device *oct)
+{
+ u32 i;
+
+ for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
+ if (!(oct->io_qmask.iq & (1UL << i)))
+ continue;
+ oct->fn_list.setup_iq_regs(oct, i);
+ }
+
+ for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
+ if (!(oct->io_qmask.oq & (1UL << i)))
+ continue;
+ oct->fn_list.setup_oq_regs(oct, i);
+ }
+
+ oct->fn_list.setup_device_regs(oct);
+
+ oct->fn_list.enable_interrupt(oct->chip);
+
+ oct->fn_list.enable_io_queues(oct);
+
+ /* for (i = 0; i < oct->num_oqs; i++) { */
+ for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
+ if (!(oct->io_qmask.oq & (1UL << i)))
+ continue;
+ writel(oct->droq[i]->max_count, oct->droq[i]->pkts_credit_reg);
+ }
+}
+
+void
+lio_cn6xxx_bar1_idx_setup(struct octeon_device *oct,
+ u64 core_addr,
+ u32 idx,
+ int valid)
+{
+ u64 bar1;
+
+ if (valid == 0) {
+ bar1 = lio_pci_readq(oct, CN6XXX_BAR1_REG(idx, oct->pcie_port));
+ lio_pci_writeq(oct, (bar1 & 0xFFFFFFFEULL),
+ CN6XXX_BAR1_REG(idx, oct->pcie_port));
+ bar1 = lio_pci_readq(oct, CN6XXX_BAR1_REG(idx, oct->pcie_port));
+ return;
+ }
+
+ /* Bits 17:4 of the PCI_BAR1_INDEXx stores bits 35:22 of
+ * the Core Addr
+ */
+ lio_pci_writeq(oct, (((core_addr >> 22) << 4) | PCI_BAR1_MASK),
+ CN6XXX_BAR1_REG(idx, oct->pcie_port));
+
+ bar1 = lio_pci_readq(oct, CN6XXX_BAR1_REG(idx, oct->pcie_port));
+}
+
+void lio_cn6xxx_bar1_idx_write(struct octeon_device *oct,
+ u32 idx,
+ u32 mask)
+{
+ lio_pci_writeq(oct, mask, CN6XXX_BAR1_REG(idx, oct->pcie_port));
+}
+
+u32 lio_cn6xxx_bar1_idx_read(struct octeon_device *oct, u32 idx)
+{
+ return (u32)lio_pci_readq(oct, CN6XXX_BAR1_REG(idx, oct->pcie_port));
+}
+
+u32
+lio_cn6xxx_update_read_index(struct octeon_device *oct __attribute__((unused)),
+ struct octeon_instr_queue *iq)
+{
+ u32 new_idx = readl(iq->inst_cnt_reg);
+
+ /* The new instr cnt reg is a 32-bit counter that can roll over. We have
+ * noted the counter's initial value at init time into
+ * reset_instr_cnt
+ */
+ if (iq->reset_instr_cnt < new_idx)
+ new_idx -= iq->reset_instr_cnt;
+ else
+ new_idx += (0xffffffff - iq->reset_instr_cnt) + 1;
+
+ /* Modulo of the new index with the IQ size will give us
+ * the new index.
+ */
+ new_idx %= iq->max_count;
+
+ return new_idx;
+}
+
+void lio_cn6xxx_enable_interrupt(void *chip)
+{
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)chip;
+ u64 mask = cn6xxx->intr_mask64 | CN6XXX_INTR_DMA0_FORCE;
+
+ /* Enable Interrupt */
+ writeq(mask, cn6xxx->intr_enb_reg64);
+}
+
+void lio_cn6xxx_disable_interrupt(void *chip)
+{
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)chip;
+
+ /* Disable Interrupts */
+ writeq(0, cn6xxx->intr_enb_reg64);
+
+ /* make sure interrupts are really disabled */
+ mmiowb();
+}
+
+void lio_cn6xxx_get_pcie_qlmport(struct octeon_device *oct)
+{
+ /* CN63xx Pass2 and newer parts implements the SLI_MAC_NUMBER register
+ * to determine the PCIE port #
+ */
+ oct->pcie_port = octeon_read_csr(oct, CN6XXX_SLI_MAC_NUMBER) & 0xff;
+
+ dev_dbg(&oct->pci_dev->dev, "Using PCIE Port %d\n", oct->pcie_port);
+}
+
+void
+lio_cn6xxx_process_pcie_error_intr(struct octeon_device *oct, u64 intr64)
+{
+ dev_err(&oct->pci_dev->dev, "Error Intr: 0x%016llx\n",
+ CVM_CAST64(intr64));
+}
+
+int lio_cn6xxx_process_droq_intr_regs(struct octeon_device *oct)
+{
+ struct octeon_droq *droq;
+ u32 oq_no, pkt_count, droq_time_mask, droq_mask, droq_int_enb;
+ u32 droq_cnt_enb, droq_cnt_mask;
+
+ droq_cnt_enb = octeon_read_csr(oct, CN6XXX_SLI_PKT_CNT_INT_ENB);
+ droq_cnt_mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_CNT_INT);
+ droq_mask = droq_cnt_mask & droq_cnt_enb;
+
+ droq_time_mask = octeon_read_csr(oct, CN6XXX_SLI_PKT_TIME_INT);
+ droq_int_enb = octeon_read_csr(oct, CN6XXX_SLI_PKT_TIME_INT_ENB);
+ droq_mask |= (droq_time_mask & droq_int_enb);
+
+ droq_mask &= oct->io_qmask.oq;
+
+ oct->droq_intr = 0;
+
+ /* for (oq_no = 0; oq_no < oct->num_oqs; oq_no++) { */
+ for (oq_no = 0; oq_no < MAX_OCTEON_OUTPUT_QUEUES; oq_no++) {
+ if (!(droq_mask & (1 << oq_no)))
+ continue;
+
+ droq = oct->droq[oq_no];
+ pkt_count = octeon_droq_check_hw_for_pkts(oct, droq);
+ if (pkt_count) {
+ oct->droq_intr |= (1ULL << oq_no);
+ if (droq->ops.poll_mode) {
+ u32 value;
+ u32 reg;
+
+ struct octeon_cn6xxx *cn6xxx =
+ (struct octeon_cn6xxx *)oct->chip;
+
+ /* disable interrupts for this droq */
+ spin_lock
+ (&cn6xxx->lock_for_droq_int_enb_reg);
+ reg = CN6XXX_SLI_PKT_TIME_INT_ENB;
+ value = octeon_read_csr(oct, reg);
+ value &= ~(1 << oq_no);
+ octeon_write_csr(oct, reg, value);
+ reg = CN6XXX_SLI_PKT_CNT_INT_ENB;
+ value = octeon_read_csr(oct, reg);
+ value &= ~(1 << oq_no);
+ octeon_write_csr(oct, reg, value);
+
+ /* Ensure that the enable register is written.
+ */
+ mmiowb();
+
+ spin_unlock(&cn6xxx->lock_for_droq_int_enb_reg);
+ }
+ }
+ }
+
+ droq_time_mask &= oct->io_qmask.oq;
+ droq_cnt_mask &= oct->io_qmask.oq;
+
+ /* Reset the PKT_CNT/TIME_INT registers. */
+ if (droq_time_mask)
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_TIME_INT, droq_time_mask);
+
+ if (droq_cnt_mask) /* reset PKT_CNT register:66xx */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_CNT_INT, droq_cnt_mask);
+
+ return 0;
+}
+
+irqreturn_t lio_cn6xxx_process_interrupt_regs(void *dev)
+{
+ struct octeon_device *oct = (struct octeon_device *)dev;
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
+ u64 intr64;
+
+ intr64 = readq(cn6xxx->intr_sum_reg64);
+
+ /* If our device has interrupted, then proceed.
+ * Also check for all f's if interrupt was triggered on an error
+ * and the PCI read fails.
+ */
+ if (!intr64 || (intr64 == 0xFFFFFFFFFFFFFFFFULL))
+ return IRQ_NONE;
+
+ oct->int_status = 0;
+
+ if (intr64 & CN6XXX_INTR_ERR)
+ lio_cn6xxx_process_pcie_error_intr(oct, intr64);
+
+ if (intr64 & CN6XXX_INTR_PKT_DATA) {
+ lio_cn6xxx_process_droq_intr_regs(oct);
+ oct->int_status |= OCT_DEV_INTR_PKT_DATA;
+ }
+
+ if (intr64 & CN6XXX_INTR_DMA0_FORCE)
+ oct->int_status |= OCT_DEV_INTR_DMA0_FORCE;
+
+ if (intr64 & CN6XXX_INTR_DMA1_FORCE)
+ oct->int_status |= OCT_DEV_INTR_DMA1_FORCE;
+
+ /* Clear the current interrupts */
+ writeq(intr64, cn6xxx->intr_sum_reg64);
+
+ return IRQ_HANDLED;
+}
+
+void lio_cn6xxx_setup_reg_address(struct octeon_device *oct,
+ void *chip,
+ struct octeon_reg_list *reg_list)
+{
+ u8 __iomem *bar0_pciaddr = oct->mmio[0].hw_addr;
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)chip;
+
+ reg_list->pci_win_wr_addr_hi =
+ (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_ADDR_HI);
+ reg_list->pci_win_wr_addr_lo =
+ (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_ADDR_LO);
+ reg_list->pci_win_wr_addr =
+ (u64 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_ADDR64);
+
+ reg_list->pci_win_rd_addr_hi =
+ (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_ADDR_HI);
+ reg_list->pci_win_rd_addr_lo =
+ (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_ADDR_LO);
+ reg_list->pci_win_rd_addr =
+ (u64 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_ADDR64);
+
+ reg_list->pci_win_wr_data_hi =
+ (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_DATA_HI);
+ reg_list->pci_win_wr_data_lo =
+ (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_DATA_LO);
+ reg_list->pci_win_wr_data =
+ (u64 __iomem *)(bar0_pciaddr + CN6XXX_WIN_WR_DATA64);
+
+ reg_list->pci_win_rd_data_hi =
+ (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_DATA_HI);
+ reg_list->pci_win_rd_data_lo =
+ (u32 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_DATA_LO);
+ reg_list->pci_win_rd_data =
+ (u64 __iomem *)(bar0_pciaddr + CN6XXX_WIN_RD_DATA64);
+
+ lio_cn6xxx_get_pcie_qlmport(oct);
+
+ cn6xxx->intr_sum_reg64 = bar0_pciaddr + CN6XXX_SLI_INT_SUM64;
+ cn6xxx->intr_mask64 = CN6XXX_INTR_MASK;
+ cn6xxx->intr_enb_reg64 =
+ bar0_pciaddr + CN6XXX_SLI_INT_ENB64(oct->pcie_port);
+}
+
+int lio_setup_cn66xx_octeon_device(struct octeon_device *oct)
+{
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
+
+ if (octeon_map_pci_barx(oct, 0, 0))
+ return 1;
+
+ if (octeon_map_pci_barx(oct, 1, MAX_BAR1_IOREMAP_SIZE)) {
+ dev_err(&oct->pci_dev->dev, "%s CN66XX BAR1 map failed\n",
+ __func__);
+ octeon_unmap_pci_barx(oct, 0);
+ return 1;
+ }
+
+ spin_lock_init(&cn6xxx->lock_for_droq_int_enb_reg);
+
+ oct->fn_list.setup_iq_regs = lio_cn66xx_setup_iq_regs;
+ oct->fn_list.setup_oq_regs = lio_cn6xxx_setup_oq_regs;
+
+ oct->fn_list.soft_reset = lio_cn6xxx_soft_reset;
+ oct->fn_list.setup_device_regs = lio_cn6xxx_setup_device_regs;
+ oct->fn_list.reinit_regs = lio_cn6xxx_reinit_regs;
+ oct->fn_list.update_iq_read_idx = lio_cn6xxx_update_read_index;
+
+ oct->fn_list.bar1_idx_setup = lio_cn6xxx_bar1_idx_setup;
+ oct->fn_list.bar1_idx_write = lio_cn6xxx_bar1_idx_write;
+ oct->fn_list.bar1_idx_read = lio_cn6xxx_bar1_idx_read;
+
+ oct->fn_list.process_interrupt_regs = lio_cn6xxx_process_interrupt_regs;
+ oct->fn_list.enable_interrupt = lio_cn6xxx_enable_interrupt;
+ oct->fn_list.disable_interrupt = lio_cn6xxx_disable_interrupt;
+
+ oct->fn_list.enable_io_queues = lio_cn6xxx_enable_io_queues;
+ oct->fn_list.disable_io_queues = lio_cn6xxx_disable_io_queues;
+
+ lio_cn6xxx_setup_reg_address(oct, oct->chip, &oct->reg_list);
+
+ cn6xxx->conf = (struct octeon_config *)
+ oct_get_config_info(oct, LIO_210SV);
+ if (!cn6xxx->conf) {
+ dev_err(&oct->pci_dev->dev, "%s No Config found for CN66XX\n",
+ __func__);
+ octeon_unmap_pci_barx(oct, 0);
+ octeon_unmap_pci_barx(oct, 1);
+ return 1;
+ }
+
+ oct->coproc_clock_rate = 1000000ULL * lio_cn6xxx_coprocessor_clock(oct);
+
+ return 0;
+}
+
+int lio_validate_cn6xxx_config_info(struct octeon_device *oct,
+ struct octeon_config *conf6xxx)
+{
+ /* int total_instrs = 0; */
+
+ if (CFG_GET_IQ_MAX_Q(conf6xxx) > CN6XXX_MAX_INPUT_QUEUES) {
+ dev_err(&oct->pci_dev->dev, "%s: Num IQ (%d) exceeds Max (%d)\n",
+ __func__, CFG_GET_IQ_MAX_Q(conf6xxx),
+ CN6XXX_MAX_INPUT_QUEUES);
+ return 1;
+ }
+
+ if (CFG_GET_OQ_MAX_Q(conf6xxx) > CN6XXX_MAX_OUTPUT_QUEUES) {
+ dev_err(&oct->pci_dev->dev, "%s: Num OQ (%d) exceeds Max (%d)\n",
+ __func__, CFG_GET_OQ_MAX_Q(conf6xxx),
+ CN6XXX_MAX_OUTPUT_QUEUES);
+ return 1;
+ }
+
+ if (CFG_GET_IQ_INSTR_TYPE(conf6xxx) != OCTEON_32BYTE_INSTR &&
+ CFG_GET_IQ_INSTR_TYPE(conf6xxx) != OCTEON_64BYTE_INSTR) {
+ dev_err(&oct->pci_dev->dev, "%s: Invalid instr type for IQ\n",
+ __func__);
+ return 1;
+ }
+ if (!(CFG_GET_OQ_INFO_PTR(conf6xxx)) ||
+ !(CFG_GET_OQ_REFILL_THRESHOLD(conf6xxx))) {
+ dev_err(&oct->pci_dev->dev, "%s: Invalid parameter for OQ\n",
+ __func__);
+ return 1;
+ }
+
+ if (!(CFG_GET_OQ_INTR_TIME(conf6xxx))) {
+ dev_err(&oct->pci_dev->dev, "%s: No Time Interrupt for OQ\n",
+ __func__);
+ return 1;
+ }
+
+ return 0;
+}
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file cn66xx_device.h
+ * \brief Host Driver: Routines that perform CN66XX specific operations.
+ */
+
+#ifndef __CN66XX_DEVICE_H__
+#define __CN66XX_DEVICE_H__
+
+/* Register address and configuration for a CN6XXX devices.
+ * If device specific changes need to be made then add a struct to include
+ * device specific fields as shown in the commented section
+ */
+struct octeon_cn6xxx {
+ /** PCI interrupt summary register */
+ u8 __iomem *intr_sum_reg64;
+
+ /** PCI interrupt enable register */
+ u8 __iomem *intr_enb_reg64;
+
+ /** The PCI interrupt mask used by interrupt handler */
+ u64 intr_mask64;
+
+ struct octeon_config *conf;
+
+ /* Example additional fields - not used currently
+ * struct {
+ * }cn6xyz;
+ */
+
+ /* For the purpose of atomic access to interrupt enable reg */
+ spinlock_t lock_for_droq_int_enb_reg;
+
+};
+
+enum octeon_pcie_mps {
+ PCIE_MPS_DEFAULT = -1, /* Use the default setup by BIOS */
+ PCIE_MPS_128B = 0,
+ PCIE_MPS_256B = 1
+};
+
+enum octeon_pcie_mrrs {
+ PCIE_MRRS_DEFAULT = -1, /* Use the default setup by BIOS */
+ PCIE_MRRS_128B = 0,
+ PCIE_MRRS_256B = 1,
+ PCIE_MRRS_512B = 2,
+ PCIE_MRRS_1024B = 3,
+ PCIE_MRRS_2048B = 4,
+ PCIE_MRRS_4096B = 5
+};
+
+/* Common functions for 66xx and 68xx */
+int lio_cn6xxx_soft_reset(struct octeon_device *oct);
+void lio_cn6xxx_enable_error_reporting(struct octeon_device *oct);
+void lio_cn6xxx_setup_pcie_mps(struct octeon_device *oct,
+ enum octeon_pcie_mps mps);
+void lio_cn6xxx_setup_pcie_mrrs(struct octeon_device *oct,
+ enum octeon_pcie_mrrs mrrs);
+void lio_cn6xxx_setup_global_input_regs(struct octeon_device *oct);
+void lio_cn6xxx_setup_global_output_regs(struct octeon_device *oct);
+void lio_cn6xxx_setup_iq_regs(struct octeon_device *oct, u32 iq_no);
+void lio_cn6xxx_setup_oq_regs(struct octeon_device *oct, u32 oq_no);
+void lio_cn6xxx_enable_io_queues(struct octeon_device *oct);
+void lio_cn6xxx_disable_io_queues(struct octeon_device *oct);
+void lio_cn6xxx_process_pcie_error_intr(struct octeon_device *oct, u64 intr64);
+int lio_cn6xxx_process_droq_intr_regs(struct octeon_device *oct);
+irqreturn_t lio_cn6xxx_process_interrupt_regs(void *dev);
+void lio_cn6xxx_reinit_regs(struct octeon_device *oct);
+void lio_cn6xxx_bar1_idx_setup(struct octeon_device *oct, u64 core_addr,
+ u32 idx, int valid);
+void lio_cn6xxx_bar1_idx_write(struct octeon_device *oct, u32 idx, u32 mask);
+u32 lio_cn6xxx_bar1_idx_read(struct octeon_device *oct, u32 idx);
+u32
+lio_cn6xxx_update_read_index(struct octeon_device *oct __attribute__((unused)),
+ struct octeon_instr_queue *iq);
+void lio_cn6xxx_enable_interrupt(void *chip);
+void lio_cn6xxx_disable_interrupt(void *chip);
+void cn6xxx_get_pcie_qlmport(struct octeon_device *oct);
+void lio_cn6xxx_setup_reg_address(struct octeon_device *oct, void *chip,
+ struct octeon_reg_list *reg_list);
+u32 lio_cn6xxx_coprocessor_clock(struct octeon_device *oct);
+u32 lio_cn6xxx_get_oq_ticks(struct octeon_device *oct, u32 time_intr_in_us);
+int lio_setup_cn66xx_octeon_device(struct octeon_device *);
+int lio_validate_cn6xxx_config_info(struct octeon_device *oct,
+ struct octeon_config *);
+
+#endif
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file cn66xx_regs.h
+ * \brief Host Driver: Register Address and Register Mask values for
+ * Octeon CN66XX devices.
+ */
+
+#ifndef __CN66XX_REGS_H__
+#define __CN66XX_REGS_H__
+
+#define CN6XXX_XPANSION_BAR 0x30
+
+#define CN6XXX_MSI_CAP 0x50
+#define CN6XXX_MSI_ADDR_LO 0x54
+#define CN6XXX_MSI_ADDR_HI 0x58
+#define CN6XXX_MSI_DATA 0x5C
+
+#define CN6XXX_PCIE_CAP 0x70
+#define CN6XXX_PCIE_DEVCAP 0x74
+#define CN6XXX_PCIE_DEVCTL 0x78
+#define CN6XXX_PCIE_LINKCAP 0x7C
+#define CN6XXX_PCIE_LINKCTL 0x80
+#define CN6XXX_PCIE_SLOTCAP 0x84
+#define CN6XXX_PCIE_SLOTCTL 0x88
+
+#define CN6XXX_PCIE_ENH_CAP 0x100
+#define CN6XXX_PCIE_UNCORR_ERR_STATUS 0x104
+#define CN6XXX_PCIE_UNCORR_ERR_MASK 0x108
+#define CN6XXX_PCIE_UNCORR_ERR 0x10C
+#define CN6XXX_PCIE_CORR_ERR_STATUS 0x110
+#define CN6XXX_PCIE_CORR_ERR_MASK 0x114
+#define CN6XXX_PCIE_ADV_ERR_CAP 0x118
+
+#define CN6XXX_PCIE_ACK_REPLAY_TIMER 0x700
+#define CN6XXX_PCIE_OTHER_MSG 0x704
+#define CN6XXX_PCIE_PORT_FORCE_LINK 0x708
+#define CN6XXX_PCIE_ACK_FREQ 0x70C
+#define CN6XXX_PCIE_PORT_LINK_CTL 0x710
+#define CN6XXX_PCIE_LANE_SKEW 0x714
+#define CN6XXX_PCIE_SYM_NUM 0x718
+#define CN6XXX_PCIE_FLTMSK 0x720
+
+/* ############## BAR0 Registers ################ */
+
+#define CN6XXX_SLI_CTL_PORT0 0x0050
+#define CN6XXX_SLI_CTL_PORT1 0x0060
+
+#define CN6XXX_SLI_WINDOW_CTL 0x02E0
+#define CN6XXX_SLI_DBG_DATA 0x0310
+#define CN6XXX_SLI_SCRATCH1 0x03C0
+#define CN6XXX_SLI_SCRATCH2 0x03D0
+#define CN6XXX_SLI_CTL_STATUS 0x0570
+
+#define CN6XXX_WIN_WR_ADDR_LO 0x0000
+#define CN6XXX_WIN_WR_ADDR_HI 0x0004
+#define CN6XXX_WIN_WR_ADDR64 CN6XXX_WIN_WR_ADDR_LO
+
+#define CN6XXX_WIN_RD_ADDR_LO 0x0010
+#define CN6XXX_WIN_RD_ADDR_HI 0x0014
+#define CN6XXX_WIN_RD_ADDR64 CN6XXX_WIN_RD_ADDR_LO
+
+#define CN6XXX_WIN_WR_DATA_LO 0x0020
+#define CN6XXX_WIN_WR_DATA_HI 0x0024
+#define CN6XXX_WIN_WR_DATA64 CN6XXX_WIN_WR_DATA_LO
+
+#define CN6XXX_WIN_RD_DATA_LO 0x0040
+#define CN6XXX_WIN_RD_DATA_HI 0x0044
+#define CN6XXX_WIN_RD_DATA64 CN6XXX_WIN_RD_DATA_LO
+
+#define CN6XXX_WIN_WR_MASK_LO 0x0030
+#define CN6XXX_WIN_WR_MASK_HI 0x0034
+#define CN6XXX_WIN_WR_MASK_REG CN6XXX_WIN_WR_MASK_LO
+
+/* 1 register (32-bit) to enable Input queues */
+#define CN6XXX_SLI_PKT_INSTR_ENB 0x1000
+
+/* 1 register (32-bit) to enable Output queues */
+#define CN6XXX_SLI_PKT_OUT_ENB 0x1010
+
+/* 1 register (32-bit) to determine whether Output queues are in reset. */
+#define CN6XXX_SLI_PORT_IN_RST_OQ 0x11F0
+
+/* 1 register (32-bit) to determine whether Input queues are in reset. */
+#define CN6XXX_SLI_PORT_IN_RST_IQ 0x11F4
+
+/*###################### REQUEST QUEUE #########################*/
+
+/* 1 register (32-bit) - instr. size of each input queue. */
+#define CN6XXX_SLI_PKT_INSTR_SIZE 0x1020
+
+/* 32 registers for Input Queue Instr Count - SLI_PKT_IN_DONE0_CNTS */
+#define CN6XXX_SLI_IQ_INSTR_COUNT_START 0x2000
+
+/* 32 registers for Input Queue Start Addr - SLI_PKT0_INSTR_BADDR */
+#define CN6XXX_SLI_IQ_BASE_ADDR_START64 0x2800
+
+/* 32 registers for Input Doorbell - SLI_PKT0_INSTR_BAOFF_DBELL */
+#define CN6XXX_SLI_IQ_DOORBELL_START 0x2C00
+
+/* 32 registers for Input Queue size - SLI_PKT0_INSTR_FIFO_RSIZE */
+#define CN6XXX_SLI_IQ_SIZE_START 0x3000
+
+/* 32 registers for Instruction Header Options - SLI_PKT0_INSTR_HEADER */
+#define CN6XXX_SLI_IQ_PKT_INSTR_HDR_START64 0x3400
+
+/* 1 register (64-bit) - Back Pressure for each input queue - SLI_PKT0_IN_BP */
+#define CN66XX_SLI_INPUT_BP_START64 0x3800
+
+/* Each Input Queue register is at a 16-byte Offset in BAR0 */
+#define CN6XXX_IQ_OFFSET 0x10
+
+/* 1 register (32-bit) - ES, RO, NS, Arbitration for Input Queue Data &
+ * gather list fetches. SLI_PKT_INPUT_CONTROL.
+ */
+#define CN6XXX_SLI_PKT_INPUT_CONTROL 0x1170
+
+/* 1 register (64-bit) - Number of instructions to read at one time
+ * - 2 bits for each input ring. SLI_PKT_INSTR_RD_SIZE.
+ */
+#define CN6XXX_SLI_PKT_INSTR_RD_SIZE 0x11A0
+
+/* 1 register (64-bit) - Assign Input ring to MAC port
+ * - 2 bits for each input ring. SLI_PKT_IN_PCIE_PORT.
+ */
+#define CN6XXX_SLI_IN_PCIE_PORT 0x11B0
+
+/*------- Request Queue Macros ---------*/
+#define CN6XXX_SLI_IQ_BASE_ADDR64(iq) \
+ (CN6XXX_SLI_IQ_BASE_ADDR_START64 + ((iq) * CN6XXX_IQ_OFFSET))
+
+#define CN6XXX_SLI_IQ_SIZE(iq) \
+ (CN6XXX_SLI_IQ_SIZE_START + ((iq) * CN6XXX_IQ_OFFSET))
+
+#define CN6XXX_SLI_IQ_PKT_INSTR_HDR64(iq) \
+ (CN6XXX_SLI_IQ_PKT_INSTR_HDR_START64 + ((iq) * CN6XXX_IQ_OFFSET))
+
+#define CN6XXX_SLI_IQ_DOORBELL(iq) \
+ (CN6XXX_SLI_IQ_DOORBELL_START + ((iq) * CN6XXX_IQ_OFFSET))
+
+#define CN6XXX_SLI_IQ_INSTR_COUNT(iq) \
+ (CN6XXX_SLI_IQ_INSTR_COUNT_START + ((iq) * CN6XXX_IQ_OFFSET))
+
+#define CN66XX_SLI_IQ_BP64(iq) \
+ (CN66XX_SLI_INPUT_BP_START64 + ((iq) * CN6XXX_IQ_OFFSET))
+
+/*------------------ Masks ----------------*/
+#define CN6XXX_INPUT_CTL_ROUND_ROBIN_ARB BIT(22)
+#define CN6XXX_INPUT_CTL_DATA_NS BIT(8)
+#define CN6XXX_INPUT_CTL_DATA_ES_64B_SWAP BIT(6)
+#define CN6XXX_INPUT_CTL_DATA_RO BIT(5)
+#define CN6XXX_INPUT_CTL_USE_CSR BIT(4)
+#define CN6XXX_INPUT_CTL_GATHER_NS BIT(3)
+#define CN6XXX_INPUT_CTL_GATHER_ES_64B_SWAP BIT(2)
+#define CN6XXX_INPUT_CTL_GATHER_RO BIT(1)
+
+#ifdef __BIG_ENDIAN_BITFIELD
+#define CN6XXX_INPUT_CTL_MASK \
+ (CN6XXX_INPUT_CTL_DATA_ES_64B_SWAP \
+ | CN6XXX_INPUT_CTL_USE_CSR \
+ | CN6XXX_INPUT_CTL_GATHER_ES_64B_SWAP)
+#else
+#define CN6XXX_INPUT_CTL_MASK \
+ (CN6XXX_INPUT_CTL_DATA_ES_64B_SWAP \
+ | CN6XXX_INPUT_CTL_USE_CSR)
+#endif
+
+/*############################ OUTPUT QUEUE #########################*/
+
+/* 32 registers for Output queue buffer and info size - SLI_PKT0_OUT_SIZE */
+#define CN6XXX_SLI_OQ0_BUFF_INFO_SIZE 0x0C00
+
+/* 32 registers for Output Queue Start Addr - SLI_PKT0_SLIST_BADDR */
+#define CN6XXX_SLI_OQ_BASE_ADDR_START64 0x1400
+
+/* 32 registers for Output Queue Packet Credits - SLI_PKT0_SLIST_BAOFF_DBELL */
+#define CN6XXX_SLI_OQ_PKT_CREDITS_START 0x1800
+
+/* 32 registers for Output Queue size - SLI_PKT0_SLIST_FIFO_RSIZE */
+#define CN6XXX_SLI_OQ_SIZE_START 0x1C00
+
+/* 32 registers for Output Queue Packet Count - SLI_PKT0_CNTS */
+#define CN6XXX_SLI_OQ_PKT_SENT_START 0x2400
+
+/* Each Output Queue register is at a 16-byte Offset in BAR0 */
+#define CN6XXX_OQ_OFFSET 0x10
+
+/* 1 register (32-bit) - 1 bit for each output queue
+ * - Relaxed Ordering setting for reading Output Queues descriptors
+ * - SLI_PKT_SLIST_ROR
+ */
+#define CN6XXX_SLI_PKT_SLIST_ROR 0x1030
+
+/* 1 register (32-bit) - 1 bit for each output queue
+ * - No Snoop mode for reading Output Queues descriptors
+ * - SLI_PKT_SLIST_NS
+ */
+#define CN6XXX_SLI_PKT_SLIST_NS 0x1040
+
+/* 1 register (64-bit) - 2 bits for each output queue
+ * - Endian-Swap mode for reading Output Queue descriptors
+ * - SLI_PKT_SLIST_ES
+ */
+#define CN6XXX_SLI_PKT_SLIST_ES64 0x1050
+
+/* 1 register (32-bit) - 1 bit for each output queue
+ * - InfoPtr mode for Output Queues.
+ * - SLI_PKT_IPTR
+ */
+#define CN6XXX_SLI_PKT_IPTR 0x1070
+
+/* 1 register (32-bit) - 1 bit for each output queue
+ * - DPTR format selector for Output queues.
+ * - SLI_PKT_DPADDR
+ */
+#define CN6XXX_SLI_PKT_DPADDR 0x1080
+
+/* 1 register (32-bit) - 1 bit for each output queue
+ * - Relaxed Ordering setting for reading Output Queues data
+ * - SLI_PKT_DATA_OUT_ROR
+ */
+#define CN6XXX_SLI_PKT_DATA_OUT_ROR 0x1090
+
+/* 1 register (32-bit) - 1 bit for each output queue
+ * - No Snoop mode for reading Output Queues data
+ * - SLI_PKT_DATA_OUT_NS
+ */
+#define CN6XXX_SLI_PKT_DATA_OUT_NS 0x10A0
+
+/* 1 register (64-bit) - 2 bits for each output queue
+ * - Endian-Swap mode for reading Output Queue data
+ * - SLI_PKT_DATA_OUT_ES
+ */
+#define CN6XXX_SLI_PKT_DATA_OUT_ES64 0x10B0
+
+/* 1 register (32-bit) - 1 bit for each output queue
+ * - Controls whether SLI_PKTn_CNTS is incremented for bytes or for packets.
+ * - SLI_PKT_OUT_BMODE
+ */
+#define CN6XXX_SLI_PKT_OUT_BMODE 0x10D0
+
+/* 1 register (64-bit) - 2 bits for each output queue
+ * - Assign PCIE port for Output queues
+ * - SLI_PKT_PCIE_PORT.
+ */
+#define CN6XXX_SLI_PKT_PCIE_PORT64 0x10E0
+
+/* 1 (64-bit) register for Output Queue Packet Count Interrupt Threshold
+ * & Time Threshold. The same setting applies to all 32 queues.
+ * The register is defined as a 64-bit registers, but we use the
+ * 32-bit offsets to define distinct addresses.
+ */
+#define CN6XXX_SLI_OQ_INT_LEVEL_PKTS 0x1120
+#define CN6XXX_SLI_OQ_INT_LEVEL_TIME 0x1124
+
+/* 1 (64-bit register) for Output Queue backpressure across all rings. */
+#define CN6XXX_SLI_OQ_WMARK 0x1180
+
+/* 1 register to control output queue global backpressure & ring enable. */
+#define CN6XXX_SLI_PKT_CTL 0x1220
+
+/*------- Output Queue Macros ---------*/
+#define CN6XXX_SLI_OQ_BASE_ADDR64(oq) \
+ (CN6XXX_SLI_OQ_BASE_ADDR_START64 + ((oq) * CN6XXX_OQ_OFFSET))
+
+#define CN6XXX_SLI_OQ_SIZE(oq) \
+ (CN6XXX_SLI_OQ_SIZE_START + ((oq) * CN6XXX_OQ_OFFSET))
+
+#define CN6XXX_SLI_OQ_BUFF_INFO_SIZE(oq) \
+ (CN6XXX_SLI_OQ0_BUFF_INFO_SIZE + ((oq) * CN6XXX_OQ_OFFSET))
+
+#define CN6XXX_SLI_OQ_PKTS_SENT(oq) \
+ (CN6XXX_SLI_OQ_PKT_SENT_START + ((oq) * CN6XXX_OQ_OFFSET))
+
+#define CN6XXX_SLI_OQ_PKTS_CREDIT(oq) \
+ (CN6XXX_SLI_OQ_PKT_CREDITS_START + ((oq) * CN6XXX_OQ_OFFSET))
+
+/*######################### DMA Counters #########################*/
+
+/* 2 registers (64-bit) - DMA Count - 1 for each DMA counter 0/1. */
+#define CN6XXX_DMA_CNT_START 0x0400
+
+/* 2 registers (64-bit) - DMA Timer 0/1, contains DMA timer values
+ * SLI_DMA_0_TIM
+ */
+#define CN6XXX_DMA_TIM_START 0x0420
+
+/* 2 registers (64-bit) - DMA count & Time Interrupt threshold -
+ * SLI_DMA_0_INT_LEVEL
+ */
+#define CN6XXX_DMA_INT_LEVEL_START 0x03E0
+
+/* Each DMA register is at a 16-byte Offset in BAR0 */
+#define CN6XXX_DMA_OFFSET 0x10
+
+/*---------- DMA Counter Macros ---------*/
+#define CN6XXX_DMA_CNT(dq) \
+ (CN6XXX_DMA_CNT_START + ((dq) * CN6XXX_DMA_OFFSET))
+
+#define CN6XXX_DMA_INT_LEVEL(dq) \
+ (CN6XXX_DMA_INT_LEVEL_START + ((dq) * CN6XXX_DMA_OFFSET))
+
+#define CN6XXX_DMA_PKT_INT_LEVEL(dq) \
+ (CN6XXX_DMA_INT_LEVEL_START + ((dq) * CN6XXX_DMA_OFFSET))
+
+#define CN6XXX_DMA_TIME_INT_LEVEL(dq) \
+ (CN6XXX_DMA_INT_LEVEL_START + 4 + ((dq) * CN6XXX_DMA_OFFSET))
+
+#define CN6XXX_DMA_TIM(dq) \
+ (CN6XXX_DMA_TIM_START + ((dq) * CN6XXX_DMA_OFFSET))
+
+/*######################## INTERRUPTS #########################*/
+
+/* 1 register (64-bit) for Interrupt Summary */
+#define CN6XXX_SLI_INT_SUM64 0x0330
+
+/* 1 register (64-bit) for Interrupt Enable */
+#define CN6XXX_SLI_INT_ENB64_PORT0 0x0340
+#define CN6XXX_SLI_INT_ENB64_PORT1 0x0350
+
+/* 1 register (32-bit) to enable Output Queue Packet/Byte Count Interrupt */
+#define CN6XXX_SLI_PKT_CNT_INT_ENB 0x1150
+
+/* 1 register (32-bit) to enable Output Queue Packet Timer Interrupt */
+#define CN6XXX_SLI_PKT_TIME_INT_ENB 0x1160
+
+/* 1 register (32-bit) to indicate which Output Queue reached pkt threshold */
+#define CN6XXX_SLI_PKT_CNT_INT 0x1130
+
+/* 1 register (32-bit) to indicate which Output Queue reached time threshold */
+#define CN6XXX_SLI_PKT_TIME_INT 0x1140
+
+/*------------------ Interrupt Masks ----------------*/
+
+#define CN6XXX_INTR_RML_TIMEOUT_ERR BIT(1)
+#define CN6XXX_INTR_BAR0_RW_TIMEOUT_ERR BIT(2)
+#define CN6XXX_INTR_IO2BIG_ERR BIT(3)
+#define CN6XXX_INTR_PKT_COUNT BIT(4)
+#define CN6XXX_INTR_PKT_TIME BIT(5)
+#define CN6XXX_INTR_M0UPB0_ERR BIT(8)
+#define CN6XXX_INTR_M0UPWI_ERR BIT(9)
+#define CN6XXX_INTR_M0UNB0_ERR BIT(10)
+#define CN6XXX_INTR_M0UNWI_ERR BIT(11)
+#define CN6XXX_INTR_M1UPB0_ERR BIT(12)
+#define CN6XXX_INTR_M1UPWI_ERR BIT(13)
+#define CN6XXX_INTR_M1UNB0_ERR BIT(14)
+#define CN6XXX_INTR_M1UNWI_ERR BIT(15)
+#define CN6XXX_INTR_MIO_INT0 BIT(16)
+#define CN6XXX_INTR_MIO_INT1 BIT(17)
+#define CN6XXX_INTR_MAC_INT0 BIT(18)
+#define CN6XXX_INTR_MAC_INT1 BIT(19)
+
+#define CN6XXX_INTR_DMA0_FORCE BIT_ULL(32)
+#define CN6XXX_INTR_DMA1_FORCE BIT_ULL(33)
+#define CN6XXX_INTR_DMA0_COUNT BIT_ULL(34)
+#define CN6XXX_INTR_DMA1_COUNT BIT_ULL(35)
+#define CN6XXX_INTR_DMA0_TIME BIT_ULL(36)
+#define CN6XXX_INTR_DMA1_TIME BIT_ULL(37)
+#define CN6XXX_INTR_INSTR_DB_OF_ERR BIT_ULL(48)
+#define CN6XXX_INTR_SLIST_DB_OF_ERR BIT_ULL(49)
+#define CN6XXX_INTR_POUT_ERR BIT_ULL(50)
+#define CN6XXX_INTR_PIN_BP_ERR BIT_ULL(51)
+#define CN6XXX_INTR_PGL_ERR BIT_ULL(52)
+#define CN6XXX_INTR_PDI_ERR BIT_ULL(53)
+#define CN6XXX_INTR_POP_ERR BIT_ULL(54)
+#define CN6XXX_INTR_PINS_ERR BIT_ULL(55)
+#define CN6XXX_INTR_SPRT0_ERR BIT_ULL(56)
+#define CN6XXX_INTR_SPRT1_ERR BIT_ULL(57)
+#define CN6XXX_INTR_ILL_PAD_ERR BIT_ULL(60)
+
+#define CN6XXX_INTR_DMA0_DATA (CN6XXX_INTR_DMA0_TIME)
+
+#define CN6XXX_INTR_DMA1_DATA (CN6XXX_INTR_DMA1_TIME)
+
+#define CN6XXX_INTR_DMA_DATA \
+ (CN6XXX_INTR_DMA0_DATA | CN6XXX_INTR_DMA1_DATA)
+
+#define CN6XXX_INTR_PKT_DATA (CN6XXX_INTR_PKT_TIME | \
+ CN6XXX_INTR_PKT_COUNT)
+
+/* Sum of interrupts for all PCI-Express Data Interrupts */
+#define CN6XXX_INTR_PCIE_DATA \
+ (CN6XXX_INTR_DMA_DATA | CN6XXX_INTR_PKT_DATA)
+
+#define CN6XXX_INTR_MIO \
+ (CN6XXX_INTR_MIO_INT0 | CN6XXX_INTR_MIO_INT1)
+
+#define CN6XXX_INTR_MAC \
+ (CN6XXX_INTR_MAC_INT0 | CN6XXX_INTR_MAC_INT1)
+
+/* Sum of interrupts for error events */
+#define CN6XXX_INTR_ERR \
+ (CN6XXX_INTR_BAR0_RW_TIMEOUT_ERR \
+ | CN6XXX_INTR_IO2BIG_ERR \
+ | CN6XXX_INTR_M0UPB0_ERR \
+ | CN6XXX_INTR_M0UPWI_ERR \
+ | CN6XXX_INTR_M0UNB0_ERR \
+ | CN6XXX_INTR_M0UNWI_ERR \
+ | CN6XXX_INTR_M1UPB0_ERR \
+ | CN6XXX_INTR_M1UPWI_ERR \
+ | CN6XXX_INTR_M1UPB0_ERR \
+ | CN6XXX_INTR_M1UNWI_ERR \
+ | CN6XXX_INTR_INSTR_DB_OF_ERR \
+ | CN6XXX_INTR_SLIST_DB_OF_ERR \
+ | CN6XXX_INTR_POUT_ERR \
+ | CN6XXX_INTR_PIN_BP_ERR \
+ | CN6XXX_INTR_PGL_ERR \
+ | CN6XXX_INTR_PDI_ERR \
+ | CN6XXX_INTR_POP_ERR \
+ | CN6XXX_INTR_PINS_ERR \
+ | CN6XXX_INTR_SPRT0_ERR \
+ | CN6XXX_INTR_SPRT1_ERR \
+ | CN6XXX_INTR_ILL_PAD_ERR)
+
+/* Programmed Mask for Interrupt Sum */
+#define CN6XXX_INTR_MASK \
+ (CN6XXX_INTR_PCIE_DATA \
+ | CN6XXX_INTR_DMA0_FORCE \
+ | CN6XXX_INTR_DMA1_FORCE \
+ | CN6XXX_INTR_MIO \
+ | CN6XXX_INTR_MAC \
+ | CN6XXX_INTR_ERR)
+
+#define CN6XXX_SLI_S2M_PORT0_CTL 0x3D80
+#define CN6XXX_SLI_S2M_PORT1_CTL 0x3D90
+#define CN6XXX_SLI_S2M_PORTX_CTL(port) \
+ (CN6XXX_SLI_S2M_PORT0_CTL + (port * 0x10))
+
+#define CN6XXX_SLI_INT_ENB64(port) \
+ (CN6XXX_SLI_INT_ENB64_PORT0 + (port * 0x10))
+
+#define CN6XXX_SLI_MAC_NUMBER 0x3E00
+
+/* CN6XXX BAR1 Index registers. */
+#define CN6XXX_PEM_BAR1_INDEX000 0x00011800C00000A8ULL
+#define CN6XXX_PEM_OFFSET 0x0000000001000000ULL
+
+#define CN6XXX_BAR1_INDEX_START CN6XXX_PEM_BAR1_INDEX000
+#define CN6XXX_PCI_BAR1_OFFSET 0x8
+
+#define CN6XXX_BAR1_REG(idx, port) \
+ (CN6XXX_BAR1_INDEX_START + (port * CN6XXX_PEM_OFFSET) + \
+ (CN6XXX_PCI_BAR1_OFFSET * (idx)))
+
+/*############################ DPI #########################*/
+
+#define CN6XXX_DPI_CTL 0x0001df0000000040ULL
+
+#define CN6XXX_DPI_DMA_CONTROL 0x0001df0000000048ULL
+
+#define CN6XXX_DPI_REQ_GBL_ENB 0x0001df0000000050ULL
+
+#define CN6XXX_DPI_REQ_ERR_RSP 0x0001df0000000058ULL
+
+#define CN6XXX_DPI_REQ_ERR_RST 0x0001df0000000060ULL
+
+#define CN6XXX_DPI_DMA_ENG0_ENB 0x0001df0000000080ULL
+
+#define CN6XXX_DPI_DMA_ENG_ENB(q_no) \
+ (CN6XXX_DPI_DMA_ENG0_ENB + (q_no * 8))
+
+#define CN6XXX_DPI_DMA_ENG0_BUF 0x0001df0000000880ULL
+
+#define CN6XXX_DPI_DMA_ENG_BUF(q_no) \
+ (CN6XXX_DPI_DMA_ENG0_BUF + (q_no * 8))
+
+#define CN6XXX_DPI_SLI_PRT0_CFG 0x0001df0000000900ULL
+#define CN6XXX_DPI_SLI_PRT1_CFG 0x0001df0000000908ULL
+#define CN6XXX_DPI_SLI_PRTX_CFG(port) \
+ (CN6XXX_DPI_SLI_PRT0_CFG + (port * 0x10))
+
+#define CN6XXX_DPI_DMA_COMMIT_MODE BIT_ULL(58)
+#define CN6XXX_DPI_DMA_PKT_HP BIT_ULL(57)
+#define CN6XXX_DPI_DMA_PKT_EN BIT_ULL(56)
+#define CN6XXX_DPI_DMA_O_ES BIT_ULL(15)
+#define CN6XXX_DPI_DMA_O_MODE BIT_ULL(14)
+
+#define CN6XXX_DPI_DMA_CTL_MASK \
+ (CN6XXX_DPI_DMA_COMMIT_MODE | \
+ CN6XXX_DPI_DMA_PKT_HP | \
+ CN6XXX_DPI_DMA_PKT_EN | \
+ CN6XXX_DPI_DMA_O_ES | \
+ CN6XXX_DPI_DMA_O_MODE)
+
+/*############################ CIU #########################*/
+
+#define CN6XXX_CIU_SOFT_BIST 0x0001070000000738ULL
+#define CN6XXX_CIU_SOFT_RST 0x0001070000000740ULL
+
+/*############################ MIO #########################*/
+#define CN6XXX_MIO_PTP_CLOCK_CFG 0x0001070000000f00ULL
+#define CN6XXX_MIO_PTP_CLOCK_LO 0x0001070000000f08ULL
+#define CN6XXX_MIO_PTP_CLOCK_HI 0x0001070000000f10ULL
+#define CN6XXX_MIO_PTP_CLOCK_COMP 0x0001070000000f18ULL
+#define CN6XXX_MIO_PTP_TIMESTAMP 0x0001070000000f20ULL
+#define CN6XXX_MIO_PTP_EVT_CNT 0x0001070000000f28ULL
+#define CN6XXX_MIO_PTP_CKOUT_THRESH_LO 0x0001070000000f30ULL
+#define CN6XXX_MIO_PTP_CKOUT_THRESH_HI 0x0001070000000f38ULL
+#define CN6XXX_MIO_PTP_CKOUT_HI_INCR 0x0001070000000f40ULL
+#define CN6XXX_MIO_PTP_CKOUT_LO_INCR 0x0001070000000f48ULL
+#define CN6XXX_MIO_PTP_PPS_THRESH_LO 0x0001070000000f50ULL
+#define CN6XXX_MIO_PTP_PPS_THRESH_HI 0x0001070000000f58ULL
+#define CN6XXX_MIO_PTP_PPS_HI_INCR 0x0001070000000f60ULL
+#define CN6XXX_MIO_PTP_PPS_LO_INCR 0x0001070000000f68ULL
+
+#define CN6XXX_MIO_QLM4_CFG 0x00011800000015B0ULL
+#define CN6XXX_MIO_RST_BOOT 0x0001180000001600ULL
+
+#define CN6XXX_MIO_QLM_CFG_MASK 0x7
+
+/*############################ LMC #########################*/
+
+#define CN6XXX_LMC0_RESET_CTL 0x0001180088000180ULL
+#define CN6XXX_LMC0_RESET_CTL_DDR3RST_MASK 0x0000000000000001ULL
+
+#endif
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+#include "octeon_mem_ops.h"
+
+static void lio_cn68xx_set_dpi_regs(struct octeon_device *oct)
+{
+ u32 i;
+ u32 fifo_sizes[6] = { 3, 3, 1, 1, 1, 8 };
+
+ lio_pci_writeq(oct, CN6XXX_DPI_DMA_CTL_MASK, CN6XXX_DPI_DMA_CONTROL);
+ dev_dbg(&oct->pci_dev->dev, "DPI_DMA_CONTROL: 0x%016llx\n",
+ lio_pci_readq(oct, CN6XXX_DPI_DMA_CONTROL));
+
+ for (i = 0; i < 6; i++) {
+ /* Prevent service of instruction queue for all DMA engines
+ * Engine 5 will remain 0. Engines 0 - 4 will be setup by
+ * core.
+ */
+ lio_pci_writeq(oct, 0, CN6XXX_DPI_DMA_ENG_ENB(i));
+ lio_pci_writeq(oct, fifo_sizes[i], CN6XXX_DPI_DMA_ENG_BUF(i));
+ dev_dbg(&oct->pci_dev->dev, "DPI_ENG_BUF%d: 0x%016llx\n", i,
+ lio_pci_readq(oct, CN6XXX_DPI_DMA_ENG_BUF(i)));
+ }
+
+ /* DPI_SLI_PRT_CFG has MPS and MRRS settings that will be set
+ * separately.
+ */
+
+ lio_pci_writeq(oct, 1, CN6XXX_DPI_CTL);
+ dev_dbg(&oct->pci_dev->dev, "DPI_CTL: 0x%016llx\n",
+ lio_pci_readq(oct, CN6XXX_DPI_CTL));
+}
+
+static int lio_cn68xx_soft_reset(struct octeon_device *oct)
+{
+ lio_cn6xxx_soft_reset(oct);
+ lio_cn68xx_set_dpi_regs(oct);
+
+ return 0;
+}
+
+static void lio_cn68xx_setup_pkt_ctl_regs(struct octeon_device *oct)
+{
+ struct octeon_cn6xxx *cn68xx = (struct octeon_cn6xxx *)oct->chip;
+ u64 pktctl, tx_pipe, max_oqs;
+
+ pktctl = octeon_read_csr64(oct, CN6XXX_SLI_PKT_CTL);
+
+ /* 68XX specific */
+ max_oqs = CFG_GET_OQ_MAX_Q(CHIP_FIELD(oct, cn6xxx, conf));
+ tx_pipe = octeon_read_csr64(oct, CN68XX_SLI_TX_PIPE);
+ tx_pipe &= 0xffffffffff00ffffULL; /* clear out NUMP field */
+ tx_pipe |= max_oqs << 16; /* put max_oqs in NUMP field */
+ octeon_write_csr64(oct, CN68XX_SLI_TX_PIPE, tx_pipe);
+
+ if (CFG_GET_IS_SLI_BP_ON(cn68xx->conf))
+ pktctl |= 0xF;
+ else
+ /* Disable per-port backpressure. */
+ pktctl &= ~0xF;
+ octeon_write_csr64(oct, CN6XXX_SLI_PKT_CTL, pktctl);
+}
+
+static int lio_cn68xx_setup_device_regs(struct octeon_device *oct)
+{
+ lio_cn6xxx_setup_pcie_mps(oct, PCIE_MPS_DEFAULT);
+ lio_cn6xxx_setup_pcie_mrrs(oct, PCIE_MRRS_256B);
+ lio_cn6xxx_enable_error_reporting(oct);
+
+ lio_cn6xxx_setup_global_input_regs(oct);
+ lio_cn68xx_setup_pkt_ctl_regs(oct);
+ lio_cn6xxx_setup_global_output_regs(oct);
+
+ /* Default error timeout value should be 0x200000 to avoid host hang
+ * when reads invalid register
+ */
+ octeon_write_csr64(oct, CN6XXX_SLI_WINDOW_CTL, 0x200000ULL);
+
+ return 0;
+}
+
+static inline void lio_cn68xx_vendor_message_fix(struct octeon_device *oct)
+{
+ u32 val = 0;
+
+ /* Set M_VEND1_DRP and M_VEND0_DRP bits */
+ pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_FLTMSK, &val);
+ val |= 0x3;
+ pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_FLTMSK, val);
+}
+
+int lio_is_210nv(struct octeon_device *oct)
+{
+ u64 mio_qlm4_cfg = lio_pci_readq(oct, CN6XXX_MIO_QLM4_CFG);
+
+ return ((mio_qlm4_cfg & CN6XXX_MIO_QLM_CFG_MASK) == 0);
+}
+
+int lio_setup_cn68xx_octeon_device(struct octeon_device *oct)
+{
+ struct octeon_cn6xxx *cn68xx = (struct octeon_cn6xxx *)oct->chip;
+ u16 card_type = LIO_410NV;
+
+ if (octeon_map_pci_barx(oct, 0, 0))
+ return 1;
+
+ if (octeon_map_pci_barx(oct, 1, MAX_BAR1_IOREMAP_SIZE)) {
+ dev_err(&oct->pci_dev->dev, "%s CN68XX BAR1 map failed\n",
+ __func__);
+ octeon_unmap_pci_barx(oct, 0);
+ return 1;
+ }
+
+ spin_lock_init(&cn68xx->lock_for_droq_int_enb_reg);
+
+ oct->fn_list.setup_iq_regs = lio_cn6xxx_setup_iq_regs;
+ oct->fn_list.setup_oq_regs = lio_cn6xxx_setup_oq_regs;
+
+ oct->fn_list.process_interrupt_regs = lio_cn6xxx_process_interrupt_regs;
+ oct->fn_list.soft_reset = lio_cn68xx_soft_reset;
+ oct->fn_list.setup_device_regs = lio_cn68xx_setup_device_regs;
+ oct->fn_list.reinit_regs = lio_cn6xxx_reinit_regs;
+ oct->fn_list.update_iq_read_idx = lio_cn6xxx_update_read_index;
+
+ oct->fn_list.bar1_idx_setup = lio_cn6xxx_bar1_idx_setup;
+ oct->fn_list.bar1_idx_write = lio_cn6xxx_bar1_idx_write;
+ oct->fn_list.bar1_idx_read = lio_cn6xxx_bar1_idx_read;
+
+ oct->fn_list.enable_interrupt = lio_cn6xxx_enable_interrupt;
+ oct->fn_list.disable_interrupt = lio_cn6xxx_disable_interrupt;
+
+ oct->fn_list.enable_io_queues = lio_cn6xxx_enable_io_queues;
+ oct->fn_list.disable_io_queues = lio_cn6xxx_disable_io_queues;
+
+ lio_cn6xxx_setup_reg_address(oct, oct->chip, &oct->reg_list);
+
+ /* Determine variant of card */
+ if (lio_is_210nv(oct))
+ card_type = LIO_210NV;
+
+ cn68xx->conf = (struct octeon_config *)
+ oct_get_config_info(oct, card_type);
+ if (!cn68xx->conf) {
+ dev_err(&oct->pci_dev->dev, "%s No Config found for CN68XX %s\n",
+ __func__,
+ (card_type == LIO_410NV) ? LIO_410NV_NAME :
+ LIO_210NV_NAME);
+ octeon_unmap_pci_barx(oct, 0);
+ octeon_unmap_pci_barx(oct, 1);
+ return 1;
+ }
+
+ oct->coproc_clock_rate = 1000000ULL * lio_cn6xxx_coprocessor_clock(oct);
+
+ lio_cn68xx_vendor_message_fix(oct);
+
+ return 0;
+}
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file cn68xx_device.h
+ * \brief Host Driver: Routines that perform CN68XX specific operations.
+ */
+
+#ifndef __CN68XX_DEVICE_H__
+#define __CN68XX_DEVICE_H__
+
+int lio_setup_cn68xx_octeon_device(struct octeon_device *oct);
+int lio_is_210nv(struct octeon_device *oct);
+
+#endif
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file cn68xx_regs.h
+ * \brief Host Driver: Register Address and Register Mask values for
+ * Octeon CN68XX devices. The register map for CN66XX is the same
+ * for most registers. This file has the other registers that are
+ * 68XX-specific.
+ */
+
+#ifndef __CN68XX_REGS_H__
+#define __CN68XX_REGS_H__
+#include "cn66xx_regs.h"
+
+/*###################### REQUEST QUEUE #########################*/
+
+#define CN68XX_SLI_IQ_PORT0_PKIND 0x0800
+
+#define CN68XX_SLI_IQ_PORT_PKIND(iq) \
+ (CN68XX_SLI_IQ_PORT0_PKIND + ((iq) * CN6XXX_IQ_OFFSET))
+
+/*############################ OUTPUT QUEUE #########################*/
+
+/* Starting pipe number and number of pipes used by the SLI packet output. */
+#define CN68XX_SLI_TX_PIPE 0x1230
+
+/*######################## INTERRUPTS #########################*/
+
+/*------------------ Interrupt Masks ----------------*/
+#define CN68XX_INTR_PIPE_ERR BIT_ULL(61)
+
+#endif
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#include <linux/version.h>
+#include <linux/netdevice.h>
+#include <linux/net_tstamp.h>
+#include <linux/ethtool.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+
+struct oct_mdio_cmd_context {
+ int octeon_id;
+ wait_queue_head_t wc;
+ int cond;
+};
+
+struct oct_mdio_cmd_resp {
+ u64 rh;
+ struct oct_mdio_cmd resp;
+ u64 status;
+};
+
+#define OCT_MDIO45_RESP_SIZE (sizeof(struct oct_mdio_cmd_resp))
+
+/* Octeon's interface mode of operation */
+enum {
+ INTERFACE_MODE_DISABLED,
+ INTERFACE_MODE_RGMII,
+ INTERFACE_MODE_GMII,
+ INTERFACE_MODE_SPI,
+ INTERFACE_MODE_PCIE,
+ INTERFACE_MODE_XAUI,
+ INTERFACE_MODE_SGMII,
+ INTERFACE_MODE_PICMG,
+ INTERFACE_MODE_NPI,
+ INTERFACE_MODE_LOOP,
+ INTERFACE_MODE_SRIO,
+ INTERFACE_MODE_ILK,
+ INTERFACE_MODE_RXAUI,
+ INTERFACE_MODE_QSGMII,
+ INTERFACE_MODE_AGL,
+};
+
+#define ARRAY_LENGTH(a) (sizeof(a) / sizeof((a)[0]))
+#define OCT_ETHTOOL_REGDUMP_LEN 4096
+#define OCT_ETHTOOL_REGSVER 1
+
+static const char oct_iq_stats_strings[][ETH_GSTRING_LEN] = {
+ "Instr posted",
+ "Instr processed",
+ "Instr dropped",
+ "Bytes Sent",
+ "Sgentry_sent",
+ "Inst cntreg",
+ "Tx done",
+ "Tx Iq busy",
+ "Tx dropped",
+ "Tx bytes",
+};
+
+static const char oct_droq_stats_strings[][ETH_GSTRING_LEN] = {
+ "OQ Pkts Received",
+ "OQ Bytes Received",
+ "Dropped no dispatch",
+ "Dropped nomem",
+ "Dropped toomany",
+ "Stack RX cnt",
+ "Stack RX Bytes",
+ "RX dropped",
+};
+
+#define OCTNIC_NCMD_AUTONEG_ON 0x1
+#define OCTNIC_NCMD_PHY_ON 0x2
+
+static int lio_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct oct_link_info *linfo;
+
+ linfo = &lio->linfo;
+
+ if (linfo->link.s.interface == INTERFACE_MODE_XAUI ||
+ linfo->link.s.interface == INTERFACE_MODE_RXAUI) {
+ ecmd->port = PORT_FIBRE;
+ ecmd->supported =
+ (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE |
+ SUPPORTED_Pause);
+ ecmd->advertising =
+ (ADVERTISED_10000baseT_Full | ADVERTISED_Pause);
+ ecmd->transceiver = XCVR_EXTERNAL;
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ } else {
+ dev_err(&oct->pci_dev->dev, "Unknown link interface reported\n");
+ }
+
+ if (linfo->link.s.status) {
+ ethtool_cmd_speed_set(ecmd, linfo->link.s.speed);
+ ecmd->duplex = linfo->link.s.duplex;
+ } else {
+ ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
+ ecmd->duplex = DUPLEX_UNKNOWN;
+ }
+
+ return 0;
+}
+
+static void
+lio_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
+{
+ struct lio *lio;
+ struct octeon_device *oct;
+
+ lio = GET_LIO(netdev);
+ oct = lio->oct_dev;
+
+ memset(drvinfo, 0, sizeof(struct ethtool_drvinfo));
+ strcpy(drvinfo->driver, "liquidio");
+ strcpy(drvinfo->version, LIQUIDIO_VERSION);
+ strncpy(drvinfo->fw_version, oct->fw_info.liquidio_firmware_version,
+ ETHTOOL_FWVERS_LEN);
+ strncpy(drvinfo->bus_info, pci_name(oct->pci_dev), 32);
+ drvinfo->regdump_len = OCT_ETHTOOL_REGDUMP_LEN;
+}
+
+static void
+lio_ethtool_get_channels(struct net_device *dev,
+ struct ethtool_channels *channel)
+{
+ struct lio *lio = GET_LIO(dev);
+ struct octeon_device *oct = lio->oct_dev;
+ u32 max_rx = 0, max_tx = 0, tx_count = 0, rx_count = 0;
+
+ if (OCTEON_CN6XXX(oct)) {
+ struct octeon_config *conf6x = CHIP_FIELD(oct, cn6xxx, conf);
+
+ max_rx = CFG_GET_OQ_MAX_Q(conf6x);
+ max_tx = CFG_GET_IQ_MAX_Q(conf6x);
+ rx_count = CFG_GET_NUM_RXQS_NIC_IF(conf6x, lio->ifidx);
+ tx_count = CFG_GET_NUM_TXQS_NIC_IF(conf6x, lio->ifidx);
+ }
+
+ channel->max_rx = max_rx;
+ channel->max_tx = max_tx;
+ channel->rx_count = rx_count;
+ channel->tx_count = tx_count;
+}
+
+static int lio_get_eeprom_len(struct net_device *netdev)
+{
+ u8 buf[128];
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct_dev = lio->oct_dev;
+ struct octeon_board_info *board_info;
+ int len;
+
+ board_info = (struct octeon_board_info *)(&oct_dev->boardinfo);
+ len = sprintf(buf, "boardname:%s serialnum:%s maj:%lld min:%lld\n",
+ board_info->name, board_info->serial_number,
+ board_info->major, board_info->minor);
+
+ return len;
+}
+
+static int
+lio_get_eeprom(struct net_device *netdev, struct ethtool_eeprom *eeprom,
+ u8 *bytes)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct_dev = lio->oct_dev;
+ struct octeon_board_info *board_info;
+ int len;
+
+ if (eeprom->offset != 0)
+ return -EINVAL;
+
+ eeprom->magic = oct_dev->pci_dev->vendor;
+ board_info = (struct octeon_board_info *)(&oct_dev->boardinfo);
+ len =
+ sprintf((char *)bytes,
+ "boardname:%s serialnum:%s maj:%lld min:%lld\n",
+ board_info->name, board_info->serial_number,
+ board_info->major, board_info->minor);
+
+ return 0;
+}
+
+static int octnet_gpio_access(struct net_device *netdev, int addr, int val)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct octnic_ctrl_pkt nctrl;
+ struct octnic_ctrl_params nparams;
+ int ret = 0;
+
+ memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
+
+ nctrl.ncmd.u64 = 0;
+ nctrl.ncmd.s.cmd = OCTNET_CMD_GPIO_ACCESS;
+ nctrl.ncmd.s.param1 = lio->linfo.ifidx;
+ nctrl.ncmd.s.param2 = addr;
+ nctrl.ncmd.s.param3 = val;
+ nctrl.wait_time = 100;
+ nctrl.netpndev = (u64)netdev;
+ nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
+
+ nparams.resp_order = OCTEON_RESP_ORDERED;
+
+ ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
+ if (ret < 0) {
+ dev_err(&oct->pci_dev->dev, "Failed to configure gpio value\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Callback for when mdio command response arrives
+ */
+static void octnet_mdio_resp_callback(struct octeon_device *oct,
+ u32 status,
+ void *buf)
+{
+ struct oct_mdio_cmd_resp *mdio_cmd_rsp;
+ struct oct_mdio_cmd_context *mdio_cmd_ctx;
+ struct octeon_soft_command *sc = (struct octeon_soft_command *)buf;
+
+ mdio_cmd_rsp = (struct oct_mdio_cmd_resp *)sc->virtrptr;
+ mdio_cmd_ctx = (struct oct_mdio_cmd_context *)sc->ctxptr;
+
+ oct = lio_get_device(mdio_cmd_ctx->octeon_id);
+ if (status) {
+ dev_err(&oct->pci_dev->dev, "MIDO instruction failed. Status: %llx\n",
+ CVM_CAST64(status));
+ ACCESS_ONCE(mdio_cmd_ctx->cond) = -1;
+ } else {
+ ACCESS_ONCE(mdio_cmd_ctx->cond) = 1;
+ }
+ wake_up_interruptible(&mdio_cmd_ctx->wc);
+}
+
+/* This routine provides PHY access routines for
+ * mdio clause45 .
+ */
+static int
+octnet_mdio45_access(struct lio *lio, int op, int loc, int *value)
+{
+ struct octeon_device *oct_dev = lio->oct_dev;
+ struct octeon_soft_command *sc;
+ struct oct_mdio_cmd_resp *mdio_cmd_rsp;
+ struct oct_mdio_cmd_context *mdio_cmd_ctx;
+ struct oct_mdio_cmd *mdio_cmd;
+ int retval = 0;
+
+ sc = (struct octeon_soft_command *)
+ octeon_alloc_soft_command(oct_dev,
+ sizeof(struct oct_mdio_cmd),
+ sizeof(struct oct_mdio_cmd_resp),
+ sizeof(struct oct_mdio_cmd_context));
+
+ if (!sc)
+ return -ENOMEM;
+
+ mdio_cmd_ctx = (struct oct_mdio_cmd_context *)sc->ctxptr;
+ mdio_cmd_rsp = (struct oct_mdio_cmd_resp *)sc->virtrptr;
+ mdio_cmd = (struct oct_mdio_cmd *)sc->virtdptr;
+
+ ACCESS_ONCE(mdio_cmd_ctx->cond) = 0;
+ mdio_cmd_ctx->octeon_id = lio_get_device_id(oct_dev);
+ mdio_cmd->op = op;
+ mdio_cmd->mdio_addr = loc;
+ if (op)
+ mdio_cmd->value1 = *value;
+ mdio_cmd->value2 = lio->linfo.ifidx;
+ octeon_swap_8B_data((u64 *)mdio_cmd, sizeof(struct oct_mdio_cmd) / 8);
+
+ octeon_prepare_soft_command(oct_dev, sc, OPCODE_NIC, OPCODE_NIC_MDIO45,
+ 0, 0, 0);
+
+ sc->wait_time = 1000;
+ sc->callback = octnet_mdio_resp_callback;
+ sc->callback_arg = sc;
+
+ init_waitqueue_head(&mdio_cmd_ctx->wc);
+
+ retval = octeon_send_soft_command(oct_dev, sc);
+
+ if (retval) {
+ dev_err(&oct_dev->pci_dev->dev,
+ "octnet_mdio45_access instruction failed status: %x\n",
+ retval);
+ retval = -EBUSY;
+ } else {
+ /* Sleep on a wait queue till the cond flag indicates that the
+ * response arrived
+ */
+ sleep_cond(&mdio_cmd_ctx->wc, &mdio_cmd_ctx->cond);
+ retval = mdio_cmd_rsp->status;
+ if (retval) {
+ dev_err(&oct_dev->pci_dev->dev, "octnet mdio45 access failed\n");
+ retval = -EBUSY;
+ } else {
+ octeon_swap_8B_data((u64 *)(&mdio_cmd_rsp->resp),
+ sizeof(struct oct_mdio_cmd) / 8);
+
+ if (ACCESS_ONCE(mdio_cmd_ctx->cond) == 1) {
+ if (!op)
+ *value = mdio_cmd_rsp->resp.value1;
+ } else {
+ retval = -EINVAL;
+ }
+ }
+ }
+
+ octeon_free_soft_command(oct_dev, sc);
+
+ return retval;
+}
+
+static int lio_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ int value, ret;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ if (oct->chip_id == OCTEON_CN66XX) {
+ octnet_gpio_access(netdev, VITESSE_PHY_GPIO_CFG,
+ VITESSE_PHY_GPIO_DRIVEON);
+ return 2;
+
+ } else if (oct->chip_id == OCTEON_CN68XX) {
+ /* Save the current LED settings */
+ ret = octnet_mdio45_access(lio, 0,
+ LIO68XX_LED_BEACON_ADDR,
+ &lio->phy_beacon_val);
+ if (ret)
+ return ret;
+
+ ret = octnet_mdio45_access(lio, 0,
+ LIO68XX_LED_CTRL_ADDR,
+ &lio->led_ctrl_val);
+ if (ret)
+ return ret;
+
+ /* Configure Beacon values */
+ value = LIO68XX_LED_BEACON_CFGON;
+ ret =
+ octnet_mdio45_access(lio, 1,
+ LIO68XX_LED_BEACON_ADDR,
+ &value);
+ if (ret)
+ return ret;
+
+ value = LIO68XX_LED_CTRL_CFGON;
+ ret =
+ octnet_mdio45_access(lio, 1,
+ LIO68XX_LED_CTRL_ADDR,
+ &value);
+ if (ret)
+ return ret;
+ } else {
+ return -EINVAL;
+ }
+ break;
+
+ case ETHTOOL_ID_ON:
+ if (oct->chip_id == OCTEON_CN66XX) {
+ octnet_gpio_access(netdev, VITESSE_PHY_GPIO_CFG,
+ VITESSE_PHY_GPIO_HIGH);
+
+ } else if (oct->chip_id == OCTEON_CN68XX) {
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
+ break;
+
+ case ETHTOOL_ID_OFF:
+ if (oct->chip_id == OCTEON_CN66XX)
+ octnet_gpio_access(netdev, VITESSE_PHY_GPIO_CFG,
+ VITESSE_PHY_GPIO_LOW);
+ else if (oct->chip_id == OCTEON_CN68XX)
+ return -EINVAL;
+ else
+ return -EINVAL;
+
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ if (oct->chip_id == OCTEON_CN66XX) {
+ octnet_gpio_access(netdev, VITESSE_PHY_GPIO_CFG,
+ VITESSE_PHY_GPIO_DRIVEOFF);
+ } else if (oct->chip_id == OCTEON_CN68XX) {
+ /* Restore LED settings */
+ ret = octnet_mdio45_access(lio, 1,
+ LIO68XX_LED_CTRL_ADDR,
+ &lio->led_ctrl_val);
+ if (ret)
+ return ret;
+
+ octnet_mdio45_access(lio, 1, LIO68XX_LED_BEACON_ADDR,
+ &lio->phy_beacon_val);
+ if (ret)
+ return ret;
+
+ } else {
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void
+lio_ethtool_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ering)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ u32 tx_max_pending = 0, rx_max_pending = 0, tx_pending = 0,
+ rx_pending = 0;
+
+ if (OCTEON_CN6XXX(oct)) {
+ struct octeon_config *conf6x = CHIP_FIELD(oct, cn6xxx, conf);
+
+ tx_max_pending = CN6XXX_MAX_IQ_DESCRIPTORS;
+ rx_max_pending = CN6XXX_MAX_OQ_DESCRIPTORS;
+ rx_pending = CFG_GET_NUM_RX_DESCS_NIC_IF(conf6x, lio->ifidx);
+ tx_pending = CFG_GET_NUM_TX_DESCS_NIC_IF(conf6x, lio->ifidx);
+ }
+
+ if (lio->mtu > OCTNET_DEFAULT_FRM_SIZE) {
+ ering->rx_pending = 0;
+ ering->rx_max_pending = 0;
+ ering->rx_mini_pending = 0;
+ ering->rx_jumbo_pending = rx_pending;
+ ering->rx_mini_max_pending = 0;
+ ering->rx_jumbo_max_pending = rx_max_pending;
+ } else {
+ ering->rx_pending = rx_pending;
+ ering->rx_max_pending = rx_max_pending;
+ ering->rx_mini_pending = 0;
+ ering->rx_jumbo_pending = 0;
+ ering->rx_mini_max_pending = 0;
+ ering->rx_jumbo_max_pending = 0;
+ }
+
+ ering->tx_pending = tx_pending;
+ ering->tx_max_pending = tx_max_pending;
+}
+
+static u32 lio_get_msglevel(struct net_device *netdev)
+{
+ struct lio *lio = GET_LIO(netdev);
+
+ return lio->msg_enable;
+}
+
+static void lio_set_msglevel(struct net_device *netdev, u32 msglvl)
+{
+ struct lio *lio = GET_LIO(netdev);
+
+ if ((msglvl ^ lio->msg_enable) & NETIF_MSG_HW) {
+ if (msglvl & NETIF_MSG_HW)
+ liquidio_set_feature(netdev,
+ OCTNET_CMD_VERBOSE_ENABLE);
+ else
+ liquidio_set_feature(netdev,
+ OCTNET_CMD_VERBOSE_DISABLE);
+ }
+
+ lio->msg_enable = msglvl;
+}
+
+static void
+lio_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
+{
+ /* Notes: Not supporting any auto negotiation in these
+ * drivers. Just report pause frame support.
+ */
+ pause->tx_pause = 1;
+ pause->rx_pause = 1; /* TODO: Need to support RX pause frame!!. */
+}
+
+static void
+lio_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct_dev = lio->oct_dev;
+ int i = 0, j;
+
+ for (j = 0; j < MAX_OCTEON_INSTR_QUEUES; j++) {
+ if (!(oct_dev->io_qmask.iq & (1UL << j)))
+ continue;
+ data[i++] =
+ CVM_CAST64(oct_dev->instr_queue[j]->stats.instr_posted);
+ data[i++] =
+ CVM_CAST64(
+ oct_dev->instr_queue[j]->stats.instr_processed);
+ data[i++] =
+ CVM_CAST64(
+ oct_dev->instr_queue[j]->stats.instr_dropped);
+ data[i++] =
+ CVM_CAST64(oct_dev->instr_queue[j]->stats.bytes_sent);
+ data[i++] =
+ CVM_CAST64(oct_dev->instr_queue[j]->stats.sgentry_sent);
+ data[i++] =
+ readl(oct_dev->instr_queue[j]->inst_cnt_reg);
+ data[i++] =
+ CVM_CAST64(oct_dev->instr_queue[j]->stats.tx_done);
+ data[i++] =
+ CVM_CAST64(oct_dev->instr_queue[j]->stats.tx_iq_busy);
+ data[i++] =
+ CVM_CAST64(oct_dev->instr_queue[j]->stats.tx_dropped);
+ data[i++] =
+ CVM_CAST64(oct_dev->instr_queue[j]->stats.tx_tot_bytes);
+ }
+
+ /* for (j = 0; j < oct_dev->num_oqs; j++){ */
+ for (j = 0; j < MAX_OCTEON_OUTPUT_QUEUES; j++) {
+ if (!(oct_dev->io_qmask.oq & (1UL << j)))
+ continue;
+ data[i++] = CVM_CAST64(oct_dev->droq[j]->stats.pkts_received);
+ data[i++] = CVM_CAST64(oct_dev->droq[j]->stats.bytes_received);
+ data[i++] =
+ CVM_CAST64(oct_dev->droq[j]->stats.dropped_nodispatch);
+ data[i++] = CVM_CAST64(oct_dev->droq[j]->stats.dropped_nomem);
+ data[i++] = CVM_CAST64(oct_dev->droq[j]->stats.dropped_toomany);
+ data[i++] =
+ CVM_CAST64(oct_dev->droq[j]->stats.rx_pkts_received);
+ data[i++] =
+ CVM_CAST64(oct_dev->droq[j]->stats.rx_bytes_received);
+ data[i++] =
+ CVM_CAST64(oct_dev->droq[j]->stats.rx_dropped);
+ }
+}
+
+static void lio_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct_dev = lio->oct_dev;
+ int num_iq_stats, num_oq_stats, i, j;
+
+ num_iq_stats = ARRAY_SIZE(oct_iq_stats_strings);
+ for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
+ if (!(oct_dev->io_qmask.iq & (1UL << i)))
+ continue;
+ for (j = 0; j < num_iq_stats; j++) {
+ sprintf(data, "IQ%d %s", i, oct_iq_stats_strings[j]);
+ data += ETH_GSTRING_LEN;
+ }
+ }
+
+ num_oq_stats = ARRAY_SIZE(oct_droq_stats_strings);
+ /* for (i = 0; i < oct_dev->num_oqs; i++) { */
+ for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
+ if (!(oct_dev->io_qmask.oq & (1UL << i)))
+ continue;
+ for (j = 0; j < num_oq_stats; j++) {
+ sprintf(data, "OQ%d %s", i, oct_droq_stats_strings[j]);
+ data += ETH_GSTRING_LEN;
+ }
+ }
+}
+
+static int lio_get_sset_count(struct net_device *netdev, int sset)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct_dev = lio->oct_dev;
+
+ return (ARRAY_SIZE(oct_iq_stats_strings) * oct_dev->num_iqs) +
+ (ARRAY_SIZE(oct_droq_stats_strings) * oct_dev->num_oqs);
+}
+
+static int lio_get_intr_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *intr_coal)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
+ struct octeon_instr_queue *iq;
+ struct oct_intrmod_cfg *intrmod_cfg;
+
+ intrmod_cfg = &oct->intrmod;
+
+ switch (oct->chip_id) {
+ /* case OCTEON_CN73XX: Todo */
+ /* break; */
+ case OCTEON_CN68XX:
+ case OCTEON_CN66XX:
+ if (!intrmod_cfg->intrmod_enable) {
+ intr_coal->rx_coalesce_usecs =
+ CFG_GET_OQ_INTR_TIME(cn6xxx->conf);
+ intr_coal->rx_max_coalesced_frames =
+ CFG_GET_OQ_INTR_PKT(cn6xxx->conf);
+ } else {
+ intr_coal->use_adaptive_rx_coalesce =
+ intrmod_cfg->intrmod_enable;
+ intr_coal->rate_sample_interval =
+ intrmod_cfg->intrmod_check_intrvl;
+ intr_coal->pkt_rate_high =
+ intrmod_cfg->intrmod_maxpkt_ratethr;
+ intr_coal->pkt_rate_low =
+ intrmod_cfg->intrmod_minpkt_ratethr;
+ intr_coal->rx_max_coalesced_frames_high =
+ intrmod_cfg->intrmod_maxcnt_trigger;
+ intr_coal->rx_coalesce_usecs_high =
+ intrmod_cfg->intrmod_maxtmr_trigger;
+ intr_coal->rx_coalesce_usecs_low =
+ intrmod_cfg->intrmod_mintmr_trigger;
+ intr_coal->rx_max_coalesced_frames_low =
+ intrmod_cfg->intrmod_mincnt_trigger;
+ }
+
+ iq = oct->instr_queue[lio->linfo.txpciq[0]];
+ intr_coal->tx_max_coalesced_frames = iq->fill_threshold;
+ break;
+
+ default:
+ netif_info(lio, drv, lio->netdev, "Unknown Chip !!\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Callback function for intrmod */
+static void octnet_intrmod_callback(struct octeon_device *oct_dev,
+ u32 status,
+ void *ptr)
+{
+ struct oct_intrmod_cmd *cmd = ptr;
+ struct octeon_soft_command *sc = cmd->sc;
+
+ oct_dev = cmd->oct_dev;
+
+ if (status)
+ dev_err(&oct_dev->pci_dev->dev, "intrmod config failed. Status: %llx\n",
+ CVM_CAST64(status));
+ else
+ dev_info(&oct_dev->pci_dev->dev,
+ "Rx-Adaptive Interrupt moderation enabled:%llx\n",
+ oct_dev->intrmod.intrmod_enable);
+
+ octeon_free_soft_command(oct_dev, sc);
+}
+
+/* Configure interrupt moderation parameters */
+static int octnet_set_intrmod_cfg(void *oct, struct oct_intrmod_cfg *intr_cfg)
+{
+ struct octeon_soft_command *sc;
+ struct oct_intrmod_cmd *cmd;
+ struct oct_intrmod_cfg *cfg;
+ int retval;
+ struct octeon_device *oct_dev = (struct octeon_device *)oct;
+
+ /* Alloc soft command */
+ sc = (struct octeon_soft_command *)
+ octeon_alloc_soft_command(oct_dev,
+ sizeof(struct oct_intrmod_cfg),
+ 0,
+ sizeof(struct oct_intrmod_cmd));
+
+ if (!sc)
+ return -ENOMEM;
+
+ cmd = (struct oct_intrmod_cmd *)sc->ctxptr;
+ cfg = (struct oct_intrmod_cfg *)sc->virtdptr;
+
+ memcpy(cfg, intr_cfg, sizeof(struct oct_intrmod_cfg));
+ octeon_swap_8B_data((u64 *)cfg, (sizeof(struct oct_intrmod_cfg)) / 8);
+ cmd->sc = sc;
+ cmd->cfg = cfg;
+ cmd->oct_dev = oct_dev;
+
+ octeon_prepare_soft_command(oct_dev, sc, OPCODE_NIC,
+ OPCODE_NIC_INTRMOD_CFG, 0, 0, 0);
+
+ sc->callback = octnet_intrmod_callback;
+ sc->callback_arg = cmd;
+ sc->wait_time = 1000;
+
+ retval = octeon_send_soft_command(oct_dev, sc);
+ if (retval) {
+ octeon_free_soft_command(oct_dev, sc);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* Enable/Disable auto interrupt Moderation */
+static int oct_cfg_adaptive_intr(struct lio *lio, struct ethtool_coalesce
+ *intr_coal, int adaptive)
+{
+ int ret = 0;
+ struct octeon_device *oct = lio->oct_dev;
+ struct oct_intrmod_cfg *intrmod_cfg;
+
+ intrmod_cfg = &oct->intrmod;
+
+ if (adaptive) {
+ if (intr_coal->rate_sample_interval)
+ intrmod_cfg->intrmod_check_intrvl =
+ intr_coal->rate_sample_interval;
+ else
+ intrmod_cfg->intrmod_check_intrvl =
+ LIO_INTRMOD_CHECK_INTERVAL;
+
+ if (intr_coal->pkt_rate_high)
+ intrmod_cfg->intrmod_maxpkt_ratethr =
+ intr_coal->pkt_rate_high;
+ else
+ intrmod_cfg->intrmod_maxpkt_ratethr =
+ LIO_INTRMOD_MAXPKT_RATETHR;
+
+ if (intr_coal->pkt_rate_low)
+ intrmod_cfg->intrmod_minpkt_ratethr =
+ intr_coal->pkt_rate_low;
+ else
+ intrmod_cfg->intrmod_minpkt_ratethr =
+ LIO_INTRMOD_MINPKT_RATETHR;
+
+ if (intr_coal->rx_max_coalesced_frames_high)
+ intrmod_cfg->intrmod_maxcnt_trigger =
+ intr_coal->rx_max_coalesced_frames_high;
+ else
+ intrmod_cfg->intrmod_maxcnt_trigger =
+ LIO_INTRMOD_MAXCNT_TRIGGER;
+
+ if (intr_coal->rx_coalesce_usecs_high)
+ intrmod_cfg->intrmod_maxtmr_trigger =
+ intr_coal->rx_coalesce_usecs_high;
+ else
+ intrmod_cfg->intrmod_maxtmr_trigger =
+ LIO_INTRMOD_MAXTMR_TRIGGER;
+
+ if (intr_coal->rx_coalesce_usecs_low)
+ intrmod_cfg->intrmod_mintmr_trigger =
+ intr_coal->rx_coalesce_usecs_low;
+ else
+ intrmod_cfg->intrmod_mintmr_trigger =
+ LIO_INTRMOD_MINTMR_TRIGGER;
+
+ if (intr_coal->rx_max_coalesced_frames_low)
+ intrmod_cfg->intrmod_mincnt_trigger =
+ intr_coal->rx_max_coalesced_frames_low;
+ else
+ intrmod_cfg->intrmod_mincnt_trigger =
+ LIO_INTRMOD_MINCNT_TRIGGER;
+ }
+
+ intrmod_cfg->intrmod_enable = adaptive;
+ ret = octnet_set_intrmod_cfg(oct, intrmod_cfg);
+
+ return ret;
+}
+
+static int
+oct_cfg_rx_intrcnt(struct lio *lio, struct ethtool_coalesce *intr_coal)
+{
+ int ret;
+ struct octeon_device *oct = lio->oct_dev;
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
+ u32 rx_max_coalesced_frames;
+
+ if (!intr_coal->rx_max_coalesced_frames)
+ rx_max_coalesced_frames = CN6XXX_OQ_INTR_PKT;
+ else
+ rx_max_coalesced_frames = intr_coal->rx_max_coalesced_frames;
+
+ /* Disable adaptive interrupt modulation */
+ ret = oct_cfg_adaptive_intr(lio, intr_coal, 0);
+ if (ret)
+ return ret;
+
+ /* Config Cnt based interrupt values */
+ octeon_write_csr(oct, CN6XXX_SLI_OQ_INT_LEVEL_PKTS,
+ rx_max_coalesced_frames);
+ CFG_SET_OQ_INTR_PKT(cn6xxx->conf, rx_max_coalesced_frames);
+ return 0;
+}
+
+static int oct_cfg_rx_intrtime(struct lio *lio, struct ethtool_coalesce
+ *intr_coal)
+{
+ int ret;
+ struct octeon_device *oct = lio->oct_dev;
+ struct octeon_cn6xxx *cn6xxx = (struct octeon_cn6xxx *)oct->chip;
+ u32 time_threshold, rx_coalesce_usecs;
+
+ if (!intr_coal->rx_coalesce_usecs)
+ rx_coalesce_usecs = CN6XXX_OQ_INTR_TIME;
+ else
+ rx_coalesce_usecs = intr_coal->rx_coalesce_usecs;
+
+ /* Disable adaptive interrupt modulation */
+ ret = oct_cfg_adaptive_intr(lio, intr_coal, 0);
+ if (ret)
+ return ret;
+
+ /* Config Time based interrupt values */
+ time_threshold = lio_cn6xxx_get_oq_ticks(oct, rx_coalesce_usecs);
+ octeon_write_csr(oct, CN6XXX_SLI_OQ_INT_LEVEL_TIME, time_threshold);
+ CFG_SET_OQ_INTR_TIME(cn6xxx->conf, rx_coalesce_usecs);
+
+ return 0;
+}
+
+static int lio_set_intr_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *intr_coal)
+{
+ struct lio *lio = GET_LIO(netdev);
+ int ret;
+ struct octeon_device *oct = lio->oct_dev;
+ u32 j, q_no;
+
+ if ((intr_coal->tx_max_coalesced_frames >= CN6XXX_DB_MIN) &&
+ (intr_coal->tx_max_coalesced_frames <= CN6XXX_DB_MAX)) {
+ for (j = 0; j < lio->linfo.num_txpciq; j++) {
+ q_no = lio->linfo.txpciq[j];
+ oct->instr_queue[q_no]->fill_threshold =
+ intr_coal->tx_max_coalesced_frames;
+ }
+ } else {
+ dev_err(&oct->pci_dev->dev,
+ "LIQUIDIO: Invalid tx-frames:%d. Range is min:%d max:%d\n",
+ intr_coal->tx_max_coalesced_frames, CN6XXX_DB_MIN,
+ CN6XXX_DB_MAX);
+ return -EINVAL;
+ }
+
+ /* User requested adaptive-rx on */
+ if (intr_coal->use_adaptive_rx_coalesce) {
+ ret = oct_cfg_adaptive_intr(lio, intr_coal, 1);
+ if (ret)
+ goto ret_intrmod;
+ }
+
+ /* User requested adaptive-rx off and rx coalesce */
+ if ((intr_coal->rx_coalesce_usecs) &&
+ (!intr_coal->use_adaptive_rx_coalesce)) {
+ ret = oct_cfg_rx_intrtime(lio, intr_coal);
+ if (ret)
+ goto ret_intrmod;
+ }
+
+ /* User requested adaptive-rx off and rx coalesce */
+ if ((intr_coal->rx_max_coalesced_frames) &&
+ (!intr_coal->use_adaptive_rx_coalesce)) {
+ ret = oct_cfg_rx_intrcnt(lio, intr_coal);
+ if (ret)
+ goto ret_intrmod;
+ }
+
+ /* User requested adaptive-rx off, so use default coalesce params */
+ if ((!intr_coal->rx_max_coalesced_frames) &&
+ (!intr_coal->use_adaptive_rx_coalesce) &&
+ (!intr_coal->rx_coalesce_usecs)) {
+ dev_info(&oct->pci_dev->dev,
+ "Turning off adaptive-rx interrupt moderation\n");
+ dev_info(&oct->pci_dev->dev,
+ "Using RX Coalesce Default values rx_coalesce_usecs:%d rx_max_coalesced_frames:%d\n",
+ CN6XXX_OQ_INTR_TIME, CN6XXX_OQ_INTR_PKT);
+ ret = oct_cfg_rx_intrtime(lio, intr_coal);
+ if (ret)
+ goto ret_intrmod;
+
+ ret = oct_cfg_rx_intrcnt(lio, intr_coal);
+ if (ret)
+ goto ret_intrmod;
+ }
+
+ return 0;
+ret_intrmod:
+ return ret;
+}
+
+static int lio_get_ts_info(struct net_device *netdev,
+ struct ethtool_ts_info *info)
+{
+ struct lio *lio = GET_LIO(netdev);
+
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_TX_SOFTWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RX_SOFTWARE |
+ SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_RAW_HARDWARE;
+
+ if (lio->ptp_clock)
+ info->phc_index = ptp_clock_index(lio->ptp_clock);
+ else
+ info->phc_index = -1;
+
+ info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+
+ info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+ (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT);
+
+ return 0;
+}
+
+static int lio_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct oct_link_info *linfo;
+ struct octnic_ctrl_pkt nctrl;
+ struct octnic_ctrl_params nparams;
+ int ret = 0;
+
+ /* get the link info */
+ linfo = &lio->linfo;
+
+ if (ecmd->autoneg != AUTONEG_ENABLE && ecmd->autoneg != AUTONEG_DISABLE)
+ return -EINVAL;
+
+ if (ecmd->autoneg == AUTONEG_DISABLE && ((ecmd->speed != SPEED_100 &&
+ ecmd->speed != SPEED_10) ||
+ (ecmd->duplex != DUPLEX_HALF &&
+ ecmd->duplex != DUPLEX_FULL)))
+ return -EINVAL;
+
+ /* Ethtool Support is not provided for XAUI and RXAUI Interfaces
+ * as they operate at fixed Speed and Duplex settings
+ */
+ if (linfo->link.s.interface == INTERFACE_MODE_XAUI ||
+ linfo->link.s.interface == INTERFACE_MODE_RXAUI) {
+ dev_info(&oct->pci_dev->dev, "XAUI IFs settings cannot be modified.\n");
+ return -EINVAL;
+ }
+
+ memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
+
+ nctrl.ncmd.u64 = 0;
+ nctrl.ncmd.s.cmd = OCTNET_CMD_SET_SETTINGS;
+ nctrl.wait_time = 1000;
+ nctrl.netpndev = (u64)netdev;
+ nctrl.ncmd.s.param1 = lio->linfo.ifidx;
+ nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
+
+ /* Passing the parameters sent by ethtool like Speed, Autoneg & Duplex
+ * to SE core application using ncmd.s.more & ncmd.s.param
+ */
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ /* Autoneg ON */
+ nctrl.ncmd.s.more = OCTNIC_NCMD_PHY_ON |
+ OCTNIC_NCMD_AUTONEG_ON;
+ nctrl.ncmd.s.param2 = ecmd->advertising;
+ } else {
+ /* Autoneg OFF */
+ nctrl.ncmd.s.more = OCTNIC_NCMD_PHY_ON;
+
+ nctrl.ncmd.s.param3 = ecmd->duplex;
+
+ nctrl.ncmd.s.param2 = ecmd->speed;
+ }
+
+ nparams.resp_order = OCTEON_RESP_ORDERED;
+
+ ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
+ if (ret < 0) {
+ dev_err(&oct->pci_dev->dev, "Failed to set settings\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int lio_nway_reset(struct net_device *netdev)
+{
+ if (netif_running(netdev)) {
+ struct ethtool_cmd ecmd;
+
+ memset(&ecmd, 0, sizeof(struct ethtool_cmd));
+ ecmd.autoneg = 0;
+ ecmd.speed = 0;
+ ecmd.duplex = 0;
+ lio_set_settings(netdev, &ecmd);
+ }
+ return 0;
+}
+
+/* Return register dump len. */
+static int lio_get_regs_len(struct net_device *dev)
+{
+ return OCT_ETHTOOL_REGDUMP_LEN;
+}
+
+static int cn6xxx_read_csr_reg(char *s, struct octeon_device *oct)
+{
+ u32 reg;
+ int i, len = 0;
+
+ /* PCI Window Registers */
+
+ len += sprintf(s + len, "\n\t Octeon CSR Registers\n\n");
+ reg = CN6XXX_WIN_WR_ADDR_LO;
+ len += sprintf(s + len, "\n[%02x] (WIN_WR_ADDR_LO): %08x\n",
+ CN6XXX_WIN_WR_ADDR_LO, octeon_read_csr(oct, reg));
+ reg = CN6XXX_WIN_WR_ADDR_HI;
+ len += sprintf(s + len, "[%02x] (WIN_WR_ADDR_HI): %08x\n",
+ CN6XXX_WIN_WR_ADDR_HI, octeon_read_csr(oct, reg));
+ reg = CN6XXX_WIN_RD_ADDR_LO;
+ len += sprintf(s + len, "[%02x] (WIN_RD_ADDR_LO): %08x\n",
+ CN6XXX_WIN_RD_ADDR_LO, octeon_read_csr(oct, reg));
+ reg = CN6XXX_WIN_RD_ADDR_HI;
+ len += sprintf(s + len, "[%02x] (WIN_RD_ADDR_HI): %08x\n",
+ CN6XXX_WIN_RD_ADDR_HI, octeon_read_csr(oct, reg));
+ reg = CN6XXX_WIN_WR_DATA_LO;
+ len += sprintf(s + len, "[%02x] (WIN_WR_DATA_LO): %08x\n",
+ CN6XXX_WIN_WR_DATA_LO, octeon_read_csr(oct, reg));
+ reg = CN6XXX_WIN_WR_DATA_HI;
+ len += sprintf(s + len, "[%02x] (WIN_WR_DATA_HI): %08x\n",
+ CN6XXX_WIN_WR_DATA_HI, octeon_read_csr(oct, reg));
+ len += sprintf(s + len, "[%02x] (WIN_WR_MASK_REG): %08x\n",
+ CN6XXX_WIN_WR_MASK_REG,
+ octeon_read_csr(oct, CN6XXX_WIN_WR_MASK_REG));
+
+ /* PCI Interrupt Register */
+ len += sprintf(s + len, "\n[%x] (INT_ENABLE PORT 0): %08x\n",
+ CN6XXX_SLI_INT_ENB64_PORT0, octeon_read_csr(oct,
+ CN6XXX_SLI_INT_ENB64_PORT0));
+ len += sprintf(s + len, "\n[%x] (INT_ENABLE PORT 1): %08x\n",
+ CN6XXX_SLI_INT_ENB64_PORT1,
+ octeon_read_csr(oct, CN6XXX_SLI_INT_ENB64_PORT1));
+ len += sprintf(s + len, "[%x] (INT_SUM): %08x\n", CN6XXX_SLI_INT_SUM64,
+ octeon_read_csr(oct, CN6XXX_SLI_INT_SUM64));
+
+ /* PCI Output queue registers */
+ for (i = 0; i < oct->num_oqs; i++) {
+ reg = CN6XXX_SLI_OQ_PKTS_SENT(i);
+ len += sprintf(s + len, "\n[%x] (PKTS_SENT_%d): %08x\n",
+ reg, i, octeon_read_csr(oct, reg));
+ reg = CN6XXX_SLI_OQ_PKTS_CREDIT(i);
+ len += sprintf(s + len, "[%x] (PKT_CREDITS_%d): %08x\n",
+ reg, i, octeon_read_csr(oct, reg));
+ }
+ reg = CN6XXX_SLI_OQ_INT_LEVEL_PKTS;
+ len += sprintf(s + len, "\n[%x] (PKTS_SENT_INT_LEVEL): %08x\n",
+ reg, octeon_read_csr(oct, reg));
+ reg = CN6XXX_SLI_OQ_INT_LEVEL_TIME;
+ len += sprintf(s + len, "[%x] (PKTS_SENT_TIME): %08x\n",
+ reg, octeon_read_csr(oct, reg));
+
+ /* PCI Input queue registers */
+ for (i = 0; i <= 3; i++) {
+ u32 reg;
+
+ reg = CN6XXX_SLI_IQ_DOORBELL(i);
+ len += sprintf(s + len, "\n[%x] (INSTR_DOORBELL_%d): %08x\n",
+ reg, i, octeon_read_csr(oct, reg));
+ reg = CN6XXX_SLI_IQ_INSTR_COUNT(i);
+ len += sprintf(s + len, "[%x] (INSTR_COUNT_%d): %08x\n",
+ reg, i, octeon_read_csr(oct, reg));
+ }
+
+ /* PCI DMA registers */
+
+ len += sprintf(s + len, "\n[%x] (DMA_CNT_0): %08x\n",
+ CN6XXX_DMA_CNT(0),
+ octeon_read_csr(oct, CN6XXX_DMA_CNT(0)));
+ reg = CN6XXX_DMA_PKT_INT_LEVEL(0);
+ len += sprintf(s + len, "[%x] (DMA_INT_LEV_0): %08x\n",
+ CN6XXX_DMA_PKT_INT_LEVEL(0), octeon_read_csr(oct, reg));
+ reg = CN6XXX_DMA_TIME_INT_LEVEL(0);
+ len += sprintf(s + len, "[%x] (DMA_TIME_0): %08x\n",
+ CN6XXX_DMA_TIME_INT_LEVEL(0),
+ octeon_read_csr(oct, reg));
+
+ len += sprintf(s + len, "\n[%x] (DMA_CNT_1): %08x\n",
+ CN6XXX_DMA_CNT(1),
+ octeon_read_csr(oct, CN6XXX_DMA_CNT(1)));
+ reg = CN6XXX_DMA_PKT_INT_LEVEL(1);
+ len += sprintf(s + len, "[%x] (DMA_INT_LEV_1): %08x\n",
+ CN6XXX_DMA_PKT_INT_LEVEL(1),
+ octeon_read_csr(oct, reg));
+ reg = CN6XXX_DMA_PKT_INT_LEVEL(1);
+ len += sprintf(s + len, "[%x] (DMA_TIME_1): %08x\n",
+ CN6XXX_DMA_TIME_INT_LEVEL(1),
+ octeon_read_csr(oct, reg));
+
+ /* PCI Index registers */
+
+ len += sprintf(s + len, "\n");
+
+ for (i = 0; i < 16; i++) {
+ reg = lio_pci_readq(oct, CN6XXX_BAR1_REG(i, oct->pcie_port));
+ len += sprintf(s + len, "[%llx] (BAR1_INDEX_%02d): %08x\n",
+ CN6XXX_BAR1_REG(i, oct->pcie_port), i, reg);
+ }
+
+ return len;
+}
+
+static int cn6xxx_read_config_reg(char *s, struct octeon_device *oct)
+{
+ u32 val;
+ int i, len = 0;
+
+ /* PCI CONFIG Registers */
+
+ len += sprintf(s + len,
+ "\n\t Octeon Config space Registers\n\n");
+
+ for (i = 0; i <= 13; i++) {
+ pci_read_config_dword(oct->pci_dev, (i * 4), &val);
+ len += sprintf(s + len, "[0x%x] (Config[%d]): 0x%08x\n",
+ (i * 4), i, val);
+ }
+
+ for (i = 30; i <= 34; i++) {
+ pci_read_config_dword(oct->pci_dev, (i * 4), &val);
+ len += sprintf(s + len, "[0x%x] (Config[%d]): 0x%08x\n",
+ (i * 4), i, val);
+ }
+
+ return len;
+}
+
+/* Return register dump user app. */
+static void lio_get_regs(struct net_device *dev,
+ struct ethtool_regs *regs, void *regbuf)
+{
+ struct lio *lio = GET_LIO(dev);
+ int len = 0;
+ struct octeon_device *oct = lio->oct_dev;
+
+ memset(regbuf, 0, OCT_ETHTOOL_REGDUMP_LEN);
+ regs->version = OCT_ETHTOOL_REGSVER;
+
+ switch (oct->chip_id) {
+ /* case OCTEON_CN73XX: Todo */
+ case OCTEON_CN68XX:
+ case OCTEON_CN66XX:
+ len += cn6xxx_read_csr_reg(regbuf + len, oct);
+ len += cn6xxx_read_config_reg(regbuf + len, oct);
+ break;
+ default:
+ dev_err(&oct->pci_dev->dev, "%s Unknown chipid: %d\n",
+ __func__, oct->chip_id);
+ }
+}
+
+static const struct ethtool_ops lio_ethtool_ops = {
+ .get_settings = lio_get_settings,
+ .get_link = ethtool_op_get_link,
+ .get_drvinfo = lio_get_drvinfo,
+ .get_ringparam = lio_ethtool_get_ringparam,
+ .get_channels = lio_ethtool_get_channels,
+ .set_phys_id = lio_set_phys_id,
+ .get_eeprom_len = lio_get_eeprom_len,
+ .get_eeprom = lio_get_eeprom,
+ .get_strings = lio_get_strings,
+ .get_ethtool_stats = lio_get_ethtool_stats,
+ .get_pauseparam = lio_get_pauseparam,
+ .get_regs_len = lio_get_regs_len,
+ .get_regs = lio_get_regs,
+ .get_msglevel = lio_get_msglevel,
+ .set_msglevel = lio_set_msglevel,
+ .get_sset_count = lio_get_sset_count,
+ .nway_reset = lio_nway_reset,
+ .set_settings = lio_set_settings,
+ .get_coalesce = lio_get_intr_coalesce,
+ .set_coalesce = lio_set_intr_coalesce,
+ .get_ts_info = lio_get_ts_info,
+};
+
+void liquidio_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &lio_ethtool_ops;
+}
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/net_tstamp.h>
+#include <linux/if_vlan.h>
+#include <linux/firmware.h>
+#include <linux/ethtool.h>
+#include <linux/ptp_clock_kernel.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+
+MODULE_AUTHOR("Cavium Networks, <support@cavium.com>");
+MODULE_DESCRIPTION("Cavium LiquidIO Intelligent Server Adapter Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(LIQUIDIO_VERSION);
+MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_210SV_NAME LIO_FW_NAME_SUFFIX);
+MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_210NV_NAME LIO_FW_NAME_SUFFIX);
+MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_410NV_NAME LIO_FW_NAME_SUFFIX);
+
+static int ddr_timeout = 10000;
+module_param(ddr_timeout, int, 0644);
+MODULE_PARM_DESC(ddr_timeout,
+ "Number of milliseconds to wait for DDR initialization. 0 waits for ddr_timeout to be set to non-zero value before starting to check");
+
+static u32 console_bitmask;
+module_param(console_bitmask, int, 0644);
+MODULE_PARM_DESC(console_bitmask,
+ "Bitmask indicating which consoles have debug output redirected to syslog.");
+
+#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
+
+static int debug = -1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "NETIF_MSG debug bits");
+
+static char fw_type[LIO_MAX_FW_TYPE_LEN];
+module_param_string(fw_type, fw_type, sizeof(fw_type), 0000);
+MODULE_PARM_DESC(fw_type, "Type of firmware to be loaded. Default \"nic\"");
+
+static int conf_type;
+module_param(conf_type, int, 0);
+MODULE_PARM_DESC(conf_type, "select octeon configuration 0 default 1 ovs");
+
+/* Bit mask values for lio->ifstate */
+#define LIO_IFSTATE_DROQ_OPS 0x01
+#define LIO_IFSTATE_REGISTERED 0x02
+#define LIO_IFSTATE_RUNNING 0x04
+#define LIO_IFSTATE_RX_TIMESTAMP_ENABLED 0x08
+
+/* Polling interval for determining when NIC application is alive */
+#define LIQUIDIO_STARTER_POLL_INTERVAL_MS 100
+
+/* runtime link query interval */
+#define LIQUIDIO_LINK_QUERY_INTERVAL_MS 1000
+
+struct liquidio_if_cfg_context {
+ int octeon_id;
+
+ wait_queue_head_t wc;
+
+ int cond;
+};
+
+struct liquidio_if_cfg_resp {
+ u64 rh;
+ struct liquidio_if_cfg_info cfg_info;
+ u64 status;
+};
+
+struct oct_link_status_resp {
+ u64 rh;
+ struct oct_link_info link_info;
+ u64 status;
+};
+
+struct oct_timestamp_resp {
+ u64 rh;
+ u64 timestamp;
+ u64 status;
+};
+
+#define OCT_TIMESTAMP_RESP_SIZE (sizeof(struct oct_timestamp_resp))
+
+union tx_info {
+ u64 u64;
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u16 gso_size;
+ u16 gso_segs;
+ u32 reserved;
+#else
+ u32 reserved;
+ u16 gso_segs;
+ u16 gso_size;
+#endif
+ } s;
+};
+
+/** Octeon device properties to be used by the NIC module.
+ * Each octeon device in the system will be represented
+ * by this structure in the NIC module.
+ */
+
+#define OCTNIC_MAX_SG (MAX_SKB_FRAGS)
+
+#define OCTNIC_GSO_MAX_HEADER_SIZE 128
+#define OCTNIC_GSO_MAX_SIZE (GSO_MAX_SIZE - OCTNIC_GSO_MAX_HEADER_SIZE)
+
+/** Structure of a node in list of gather components maintained by
+ * NIC driver for each network device.
+ */
+struct octnic_gather {
+ /** List manipulation. Next and prev pointers. */
+ struct list_head list;
+
+ /** Size of the gather component at sg in bytes. */
+ int sg_size;
+
+ /** Number of bytes that sg was adjusted to make it 8B-aligned. */
+ int adjust;
+
+ /** Gather component that can accommodate max sized fragment list
+ * received from the IP layer.
+ */
+ struct octeon_sg_entry *sg;
+};
+
+/** This structure is used by NIC driver to store information required
+ * to free the sk_buff when the packet has been fetched by Octeon.
+ * Bytes offset below assume worst-case of a 64-bit system.
+ */
+struct octnet_buf_free_info {
+ /** Bytes 1-8. Pointer to network device private structure. */
+ struct lio *lio;
+
+ /** Bytes 9-16. Pointer to sk_buff. */
+ struct sk_buff *skb;
+
+ /** Bytes 17-24. Pointer to gather list. */
+ struct octnic_gather *g;
+
+ /** Bytes 25-32. Physical address of skb->data or gather list. */
+ u64 dptr;
+
+ /** Bytes 33-47. Piggybacked soft command, if any */
+ struct octeon_soft_command *sc;
+};
+
+struct handshake {
+ struct completion init;
+ struct completion started;
+ struct pci_dev *pci_dev;
+ int init_ok;
+ int started_ok;
+};
+
+struct octeon_device_priv {
+ /** Tasklet structures for this device. */
+ struct tasklet_struct droq_tasklet;
+ unsigned long napi_mask;
+};
+
+static int octeon_device_init(struct octeon_device *);
+static void liquidio_remove(struct pci_dev *pdev);
+static int liquidio_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent);
+
+static struct handshake handshake[MAX_OCTEON_DEVICES];
+static struct completion first_stage;
+
+void octeon_droq_bh(unsigned long pdev)
+{
+ int q_no;
+ int reschedule = 0;
+ struct octeon_device *oct = (struct octeon_device *)pdev;
+ struct octeon_device_priv *oct_priv =
+ (struct octeon_device_priv *)oct->priv;
+
+ /* for (q_no = 0; q_no < oct->num_oqs; q_no++) { */
+ for (q_no = 0; q_no < MAX_OCTEON_OUTPUT_QUEUES; q_no++) {
+ if (!(oct->io_qmask.oq & (1UL << q_no)))
+ continue;
+ reschedule |= octeon_droq_process_packets(oct, oct->droq[q_no],
+ MAX_PACKET_BUDGET);
+ }
+
+ if (reschedule)
+ tasklet_schedule(&oct_priv->droq_tasklet);
+}
+
+int lio_wait_for_oq_pkts(struct octeon_device *oct)
+{
+ struct octeon_device_priv *oct_priv =
+ (struct octeon_device_priv *)oct->priv;
+ int retry = 100, pkt_cnt = 0, pending_pkts = 0;
+ int i;
+
+ do {
+ pending_pkts = 0;
+
+ for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
+ if (!(oct->io_qmask.oq & (1UL << i)))
+ continue;
+ pkt_cnt += octeon_droq_check_hw_for_pkts(oct,
+ oct->droq[i]);
+ }
+ if (pkt_cnt > 0) {
+ pending_pkts += pkt_cnt;
+ tasklet_schedule(&oct_priv->droq_tasklet);
+ }
+ pkt_cnt = 0;
+ schedule_timeout_uninterruptible(1);
+
+ } while (retry-- && pending_pkts);
+
+ return pkt_cnt;
+}
+
+void octeon_report_tx_completion_to_bql(void *txq, unsigned int pkts_compl,
+ unsigned int bytes_compl)
+{
+ struct netdev_queue *netdev_queue = txq;
+
+ netdev_tx_completed_queue(netdev_queue, pkts_compl, bytes_compl);
+}
+
+void octeon_update_tx_completion_counters(void *buf, int reqtype,
+ unsigned int *pkts_compl,
+ unsigned int *bytes_compl)
+{
+ struct octnet_buf_free_info *finfo;
+ struct sk_buff *skb = NULL;
+ struct octeon_soft_command *sc;
+
+ switch (reqtype) {
+ case REQTYPE_NORESP_NET:
+ case REQTYPE_NORESP_NET_SG:
+ finfo = buf;
+ skb = finfo->skb;
+ break;
+
+ case REQTYPE_RESP_NET_SG:
+ case REQTYPE_RESP_NET:
+ sc = buf;
+ skb = sc->callback_arg;
+ break;
+
+ default:
+ return;
+ }
+
+ (*pkts_compl)++;
+ *bytes_compl += skb->len;
+}
+
+void octeon_report_sent_bytes_to_bql(void *buf, int reqtype)
+{
+ struct octnet_buf_free_info *finfo;
+ struct sk_buff *skb;
+ struct octeon_soft_command *sc;
+ struct netdev_queue *txq;
+
+ switch (reqtype) {
+ case REQTYPE_NORESP_NET:
+ case REQTYPE_NORESP_NET_SG:
+ finfo = buf;
+ skb = finfo->skb;
+ break;
+
+ case REQTYPE_RESP_NET_SG:
+ case REQTYPE_RESP_NET:
+ sc = buf;
+ skb = sc->callback_arg;
+ break;
+
+ default:
+ return;
+ }
+
+ txq = netdev_get_tx_queue(skb->dev, skb_get_queue_mapping(skb));
+ netdev_tx_sent_queue(txq, skb->len);
+}
+
+int octeon_console_debug_enabled(u32 console)
+{
+ return (console_bitmask >> (console)) & 0x1;
+}
+
+/**
+ * \brief Forces all IO queues off on a given device
+ * @param oct Pointer to Octeon device
+ */
+static void force_io_queues_off(struct octeon_device *oct)
+{
+ if ((oct->chip_id == OCTEON_CN66XX) ||
+ (oct->chip_id == OCTEON_CN68XX)) {
+ /* Reset the Enable bits for Input Queues. */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, 0);
+
+ /* Reset the Enable bits for Output Queues. */
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, 0);
+ }
+}
+
+/**
+ * \brief wait for all pending requests to complete
+ * @param oct Pointer to Octeon device
+ *
+ * Called during shutdown sequence
+ */
+static int wait_for_pending_requests(struct octeon_device *oct)
+{
+ int i, pcount = 0;
+
+ for (i = 0; i < 100; i++) {
+ pcount =
+ atomic_read(&oct->response_list
+ [OCTEON_ORDERED_SC_LIST].pending_req_count);
+ if (pcount)
+ schedule_timeout_uninterruptible(HZ / 10);
+ else
+ break;
+ }
+
+ if (pcount)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * \brief Cause device to go quiet so it can be safely removed/reset/etc
+ * @param oct Pointer to Octeon device
+ */
+static inline void pcierror_quiesce_device(struct octeon_device *oct)
+{
+ int i;
+
+ /* Disable the input and output queues now. No more packets will
+ * arrive from Octeon, but we should wait for all packet processing
+ * to finish.
+ */
+ force_io_queues_off(oct);
+
+ /* To allow for in-flight requests */
+ schedule_timeout_uninterruptible(100);
+
+ if (wait_for_pending_requests(oct))
+ dev_err(&oct->pci_dev->dev, "There were pending requests\n");
+
+ /* Force all requests waiting to be fetched by OCTEON to complete. */
+ for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
+ struct octeon_instr_queue *iq;
+
+ if (!(oct->io_qmask.iq & (1UL << i)))
+ continue;
+ iq = oct->instr_queue[i];
+
+ if (atomic_read(&iq->instr_pending)) {
+ spin_lock_bh(&iq->lock);
+ iq->fill_cnt = 0;
+ iq->octeon_read_index = iq->host_write_index;
+ iq->stats.instr_processed +=
+ atomic_read(&iq->instr_pending);
+ lio_process_iq_request_list(oct, iq);
+ spin_unlock_bh(&iq->lock);
+ }
+ }
+
+ /* Force all pending ordered list requests to time out. */
+ lio_process_ordered_list(oct, 1);
+
+ /* We do not need to wait for output queue packets to be processed. */
+}
+
+/**
+ * \brief Cleanup PCI AER uncorrectable error status
+ * @param dev Pointer to PCI device
+ */
+static void cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
+{
+ int pos = 0x100;
+ u32 status, mask;
+
+ pr_info("%s :\n", __func__);
+
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
+ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
+ if (dev->error_state == pci_channel_io_normal)
+ status &= ~mask; /* Clear corresponding nonfatal bits */
+ else
+ status &= mask; /* Clear corresponding fatal bits */
+ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
+}
+
+/**
+ * \brief Stop all PCI IO to a given device
+ * @param dev Pointer to Octeon device
+ */
+static void stop_pci_io(struct octeon_device *oct)
+{
+ /* No more instructions will be forwarded. */
+ atomic_set(&oct->status, OCT_DEV_IN_RESET);
+
+ pci_disable_device(oct->pci_dev);
+
+ /* Disable interrupts */
+ oct->fn_list.disable_interrupt(oct->chip);
+
+ pcierror_quiesce_device(oct);
+
+ /* Release the interrupt line */
+ free_irq(oct->pci_dev->irq, oct);
+
+ if (oct->flags & LIO_FLAG_MSI_ENABLED)
+ pci_disable_msi(oct->pci_dev);
+
+ dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n",
+ lio_get_state_string(&oct->status));
+
+ /* cn63xx_cleanup_aer_uncorrect_error_status(oct->pci_dev); */
+ /* making it a common function for all OCTEON models */
+ cleanup_aer_uncorrect_error_status(oct->pci_dev);
+}
+
+/**
+ * \brief called when PCI error is detected
+ * @param pdev Pointer to PCI device
+ * @param state The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t liquidio_pcie_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct octeon_device *oct = pci_get_drvdata(pdev);
+
+ /* Non-correctable Non-fatal errors */
+ if (state == pci_channel_io_normal) {
+ dev_err(&oct->pci_dev->dev, "Non-correctable non-fatal error reported:\n");
+ cleanup_aer_uncorrect_error_status(oct->pci_dev);
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ }
+
+ /* Non-correctable Fatal errors */
+ dev_err(&oct->pci_dev->dev, "Non-correctable FATAL reported by PCI AER driver\n");
+ stop_pci_io(oct);
+
+ /* Always return a DISCONNECT. There is no support for recovery but only
+ * for a clean shutdown.
+ */
+ return PCI_ERS_RESULT_DISCONNECT;
+}
+
+/**
+ * \brief mmio handler
+ * @param pdev Pointer to PCI device
+ */
+static pci_ers_result_t liquidio_pcie_mmio_enabled(struct pci_dev *pdev)
+{
+ /* We should never hit this since we never ask for a reset for a Fatal
+ * Error. We always return DISCONNECT in io_error above.
+ * But play safe and return RECOVERED for now.
+ */
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * \brief called after the pci bus has been reset.
+ * @param pdev Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the octeon_resume routine.
+ */
+static pci_ers_result_t liquidio_pcie_slot_reset(struct pci_dev *pdev)
+{
+ /* We should never hit this since we never ask for a reset for a Fatal
+ * Error. We always return DISCONNECT in io_error above.
+ * But play safe and return RECOVERED for now.
+ */
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * \brief called when traffic can start flowing again.
+ * @param pdev Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the octeon_resume routine.
+ */
+static void liquidio_pcie_resume(struct pci_dev *pdev)
+{
+ /* Nothing to be done here. */
+}
+
+#ifdef CONFIG_PM
+/**
+ * \brief called when suspending
+ * @param pdev Pointer to PCI device
+ * @param state state to suspend to
+ */
+static int liquidio_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ return 0;
+}
+
+/**
+ * \brief called when resuming
+ * @param pdev Pointer to PCI device
+ */
+static int liquidio_resume(struct pci_dev *pdev)
+{
+ return 0;
+}
+#endif
+
+/* For PCI-E Advanced Error Recovery (AER) Interface */
+static struct pci_error_handlers liquidio_err_handler = {
+ .error_detected = liquidio_pcie_error_detected,
+ .mmio_enabled = liquidio_pcie_mmio_enabled,
+ .slot_reset = liquidio_pcie_slot_reset,
+ .resume = liquidio_pcie_resume,
+};
+
+static const struct pci_device_id liquidio_pci_tbl[] = {
+ { /* 68xx */
+ PCI_VENDOR_ID_CAVIUM, 0x91, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
+ },
+ { /* 66xx */
+ PCI_VENDOR_ID_CAVIUM, 0x92, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
+ },
+ {
+ 0, 0, 0, 0, 0, 0, 0
+ }
+};
+MODULE_DEVICE_TABLE(pci, liquidio_pci_tbl);
+
+static struct pci_driver liquidio_pci_driver = {
+ .name = "LiquidIO",
+ .id_table = liquidio_pci_tbl,
+ .probe = liquidio_probe,
+ .remove = liquidio_remove,
+ .err_handler = &liquidio_err_handler, /* For AER */
+
+#ifdef CONFIG_PM
+ .suspend = liquidio_suspend,
+ .resume = liquidio_resume,
+#endif
+
+};
+
+/**
+ * \brief register PCI driver
+ */
+static int liquidio_init_pci(void)
+{
+ return pci_register_driver(&liquidio_pci_driver);
+}
+
+/**
+ * \brief unregister PCI driver
+ */
+static void liquidio_deinit_pci(void)
+{
+ pci_unregister_driver(&liquidio_pci_driver);
+}
+
+/**
+ * \brief check interface state
+ * @param lio per-network private data
+ * @param state_flag flag state to check
+ */
+static inline int ifstate_check(struct lio *lio, int state_flag)
+{
+ return atomic_read(&lio->ifstate) & state_flag;
+}
+
+/**
+ * \brief set interface state
+ * @param lio per-network private data
+ * @param state_flag flag state to set
+ */
+static inline void ifstate_set(struct lio *lio, int state_flag)
+{
+ atomic_set(&lio->ifstate, (atomic_read(&lio->ifstate) | state_flag));
+}
+
+/**
+ * \brief clear interface state
+ * @param lio per-network private data
+ * @param state_flag flag state to clear
+ */
+static inline void ifstate_reset(struct lio *lio, int state_flag)
+{
+ atomic_set(&lio->ifstate, (atomic_read(&lio->ifstate) & ~(state_flag)));
+}
+
+/**
+ * \brief Stop Tx queues
+ * @param netdev network device
+ */
+static inline void txqs_stop(struct net_device *netdev)
+{
+ if (netif_is_multiqueue(netdev)) {
+ int i;
+
+ for (i = 0; i < netdev->num_tx_queues; i++)
+ netif_stop_subqueue(netdev, i);
+ } else {
+ netif_stop_queue(netdev);
+ }
+}
+
+/**
+ * \brief Start Tx queues
+ * @param netdev network device
+ */
+static inline void txqs_start(struct net_device *netdev)
+{
+ if (netif_is_multiqueue(netdev)) {
+ int i;
+
+ for (i = 0; i < netdev->num_tx_queues; i++)
+ netif_start_subqueue(netdev, i);
+ } else {
+ netif_start_queue(netdev);
+ }
+}
+
+/**
+ * \brief Wake Tx queues
+ * @param netdev network device
+ */
+static inline void txqs_wake(struct net_device *netdev)
+{
+ if (netif_is_multiqueue(netdev)) {
+ int i;
+
+ for (i = 0; i < netdev->num_tx_queues; i++)
+ netif_wake_subqueue(netdev, i);
+ } else {
+ netif_wake_queue(netdev);
+ }
+}
+
+/**
+ * \brief Stop Tx queue
+ * @param netdev network device
+ */
+static void stop_txq(struct net_device *netdev)
+{
+ txqs_stop(netdev);
+}
+
+/**
+ * \brief Start Tx queue
+ * @param netdev network device
+ */
+static void start_txq(struct net_device *netdev)
+{
+ struct lio *lio = GET_LIO(netdev);
+
+ if (lio->linfo.link.s.status) {
+ txqs_start(netdev);
+ return;
+ }
+}
+
+/**
+ * \brief Wake a queue
+ * @param netdev network device
+ * @param q which queue to wake
+ */
+static inline void wake_q(struct net_device *netdev, int q)
+{
+ if (netif_is_multiqueue(netdev))
+ netif_wake_subqueue(netdev, q);
+ else
+ netif_wake_queue(netdev);
+}
+
+/**
+ * \brief Stop a queue
+ * @param netdev network device
+ * @param q which queue to stop
+ */
+static inline void stop_q(struct net_device *netdev, int q)
+{
+ if (netif_is_multiqueue(netdev))
+ netif_stop_subqueue(netdev, q);
+ else
+ netif_stop_queue(netdev);
+}
+
+/**
+ * \brief Check Tx queue status, and take appropriate action
+ * @param lio per-network private data
+ * @returns 0 if full, number of queues woken up otherwise
+ */
+static inline int check_txq_status(struct lio *lio)
+{
+ int ret_val = 0;
+
+ if (netif_is_multiqueue(lio->netdev)) {
+ int numqs = lio->netdev->num_tx_queues;
+ int q, iq = 0;
+
+ /* check each sub-queue state */
+ for (q = 0; q < numqs; q++) {
+ iq = lio->linfo.txpciq[q & (lio->linfo.num_txpciq - 1)];
+ if (octnet_iq_is_full(lio->oct_dev, iq))
+ continue;
+ wake_q(lio->netdev, q);
+ ret_val++;
+ }
+ } else {
+ if (octnet_iq_is_full(lio->oct_dev, lio->txq))
+ return 0;
+ wake_q(lio->netdev, lio->txq);
+ ret_val = 1;
+ }
+ return ret_val;
+}
+
+/**
+ * Remove the node at the head of the list. The list would be empty at
+ * the end of this call if there are no more nodes in the list.
+ */
+static inline struct list_head *list_delete_head(struct list_head *root)
+{
+ struct list_head *node;
+
+ if ((root->prev == root) && (root->next == root))
+ node = NULL;
+ else
+ node = root->next;
+
+ if (node)
+ list_del(node);
+
+ return node;
+}
+
+/**
+ * \brief Delete gather list
+ * @param lio per-network private data
+ */
+static void delete_glist(struct lio *lio)
+{
+ struct octnic_gather *g;
+
+ do {
+ g = (struct octnic_gather *)
+ list_delete_head(&lio->glist);
+ if (g) {
+ if (g->sg)
+ kfree((void *)((unsigned long)g->sg -
+ g->adjust));
+ kfree(g);
+ }
+ } while (g);
+}
+
+/**
+ * \brief Setup gather list
+ * @param lio per-network private data
+ */
+static int setup_glist(struct lio *lio)
+{
+ int i;
+ struct octnic_gather *g;
+
+ INIT_LIST_HEAD(&lio->glist);
+
+ for (i = 0; i < lio->tx_qsize; i++) {
+ g = kmalloc(sizeof(*g), GFP_KERNEL);
+ if (!g)
+ break;
+ memset(g, 0, sizeof(struct octnic_gather));
+
+ g->sg_size =
+ ((ROUNDUP4(OCTNIC_MAX_SG) >> 2) * OCT_SG_ENTRY_SIZE);
+
+ g->sg = kmalloc(g->sg_size + 8, GFP_KERNEL);
+ if (!g->sg) {
+ kfree(g);
+ break;
+ }
+
+ /* The gather component should be aligned on 64-bit boundary */
+ if (((unsigned long)g->sg) & 7) {
+ g->adjust = 8 - (((unsigned long)g->sg) & 7);
+ g->sg = (struct octeon_sg_entry *)
+ ((unsigned long)g->sg + g->adjust);
+ }
+ list_add_tail(&g->list, &lio->glist);
+ }
+
+ if (i == lio->tx_qsize)
+ return 0;
+
+ delete_glist(lio);
+ return 1;
+}
+
+/**
+ * \brief Print link information
+ * @param netdev network device
+ */
+static void print_link_info(struct net_device *netdev)
+{
+ struct lio *lio = GET_LIO(netdev);
+
+ if (atomic_read(&lio->ifstate) & LIO_IFSTATE_REGISTERED) {
+ struct oct_link_info *linfo = &lio->linfo;
+
+ if (linfo->link.s.status) {
+ netif_info(lio, link, lio->netdev, "%d Mbps %s Duplex UP\n",
+ linfo->link.s.speed,
+ (linfo->link.s.duplex) ? "Full" : "Half");
+ } else {
+ netif_info(lio, link, lio->netdev, "Link Down\n");
+ }
+ }
+}
+
+/**
+ * \brief Update link status
+ * @param netdev network device
+ * @param ls link status structure
+ *
+ * Called on receipt of a link status response from the core application to
+ * update each interface's link status.
+ */
+static inline void update_link_status(struct net_device *netdev,
+ union oct_link_status *ls)
+{
+ struct lio *lio = GET_LIO(netdev);
+
+ if ((lio->intf_open) && (lio->linfo.link.u64 != ls->u64)) {
+ lio->linfo.link.u64 = ls->u64;
+
+ print_link_info(netdev);
+
+ if (lio->linfo.link.s.status) {
+ netif_carrier_on(netdev);
+ /* start_txq(netdev); */
+ txqs_wake(netdev);
+ } else {
+ netif_carrier_off(netdev);
+ stop_txq(netdev);
+ }
+ }
+}
+
+/**
+ * \brief Droq packet processor sceduler
+ * @param oct octeon device
+ */
+static
+void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct)
+{
+ struct octeon_device_priv *oct_priv =
+ (struct octeon_device_priv *)oct->priv;
+ u64 oq_no;
+ struct octeon_droq *droq;
+
+ if (oct->int_status & OCT_DEV_INTR_PKT_DATA) {
+ for (oq_no = 0; oq_no < MAX_OCTEON_OUTPUT_QUEUES; oq_no++) {
+ if (!(oct->droq_intr & (1 << oq_no)))
+ continue;
+
+ droq = oct->droq[oq_no];
+
+ if (droq->ops.poll_mode) {
+ droq->ops.napi_fn(droq);
+ oct_priv->napi_mask |= (1 << oq_no);
+ } else {
+ tasklet_schedule(&oct_priv->droq_tasklet);
+ }
+ }
+ }
+}
+
+/**
+ * \brief Interrupt handler for octeon
+ * @param irq unused
+ * @param dev octeon device
+ */
+static
+irqreturn_t liquidio_intr_handler(int irq __attribute__((unused)), void *dev)
+{
+ struct octeon_device *oct = (struct octeon_device *)dev;
+ irqreturn_t ret;
+
+ /* Disable our interrupts for the duration of ISR */
+ oct->fn_list.disable_interrupt(oct->chip);
+
+ ret = oct->fn_list.process_interrupt_regs(oct);
+
+ if (ret == IRQ_HANDLED)
+ liquidio_schedule_droq_pkt_handlers(oct);
+
+ /* Re-enable our interrupts */
+ if (!(atomic_read(&oct->status) == OCT_DEV_IN_RESET))
+ oct->fn_list.enable_interrupt(oct->chip);
+
+ return ret;
+}
+
+/**
+ * \brief Setup interrupt for octeon device
+ * @param oct octeon device
+ *
+ * Enable interrupt in Octeon device as given in the PCI interrupt mask.
+ */
+static int octeon_setup_interrupt(struct octeon_device *oct)
+{
+ int irqret, err;
+
+ err = pci_enable_msi(oct->pci_dev);
+ if (err)
+ dev_warn(&oct->pci_dev->dev, "Reverting to legacy interrupts. Error: %d\n",
+ err);
+ else
+ oct->flags |= LIO_FLAG_MSI_ENABLED;
+
+ irqret = request_irq(oct->pci_dev->irq, liquidio_intr_handler,
+ IRQF_SHARED, "octeon", oct);
+ if (irqret) {
+ if (oct->flags & LIO_FLAG_MSI_ENABLED)
+ pci_disable_msi(oct->pci_dev);
+ dev_err(&oct->pci_dev->dev, "Request IRQ failed with code: %d\n",
+ irqret);
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * \brief PCI probe handler
+ * @param pdev PCI device structure
+ * @param ent unused
+ */
+static int liquidio_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct octeon_device *oct_dev = NULL;
+ struct handshake *hs;
+
+ oct_dev = octeon_allocate_device(pdev->device,
+ sizeof(struct octeon_device_priv));
+ if (!oct_dev) {
+ dev_err(&pdev->dev, "Unable to allocate device\n");
+ return -ENOMEM;
+ }
+
+ dev_info(&pdev->dev, "Initializing device %x:%x.\n",
+ (u32)pdev->vendor, (u32)pdev->device);
+
+ /* Assign octeon_device for this device to the private data area. */
+ pci_set_drvdata(pdev, oct_dev);
+
+ /* set linux specific device pointer */
+ oct_dev->pci_dev = (void *)pdev;
+
+ hs = &handshake[oct_dev->octeon_id];
+ init_completion(&hs->init);
+ init_completion(&hs->started);
+ hs->pci_dev = pdev;
+
+ if (oct_dev->octeon_id == 0)
+ /* first LiquidIO NIC is detected */
+ complete(&first_stage);
+
+ if (octeon_device_init(oct_dev)) {
+ liquidio_remove(pdev);
+ return -ENOMEM;
+ }
+
+ dev_dbg(&oct_dev->pci_dev->dev, "Device is ready\n");
+
+ return 0;
+}
+
+/**
+ *\brief Destroy resources associated with octeon device
+ * @param pdev PCI device structure
+ * @param ent unused
+ */
+static void octeon_destroy_resources(struct octeon_device *oct)
+{
+ int i;
+ struct octeon_device_priv *oct_priv =
+ (struct octeon_device_priv *)oct->priv;
+
+ struct handshake *hs;
+
+ switch (atomic_read(&oct->status)) {
+ case OCT_DEV_RUNNING:
+ case OCT_DEV_CORE_OK:
+
+ /* No more instructions will be forwarded. */
+ atomic_set(&oct->status, OCT_DEV_IN_RESET);
+
+ oct->app_mode = CVM_DRV_INVALID_APP;
+ dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n",
+ lio_get_state_string(&oct->status));
+
+ schedule_timeout_uninterruptible(HZ / 10);
+
+ /* fallthrough */
+ case OCT_DEV_HOST_OK:
+
+ /* fallthrough */
+ case OCT_DEV_CONSOLE_INIT_DONE:
+ /* Remove any consoles */
+ octeon_remove_consoles(oct);
+
+ /* fallthrough */
+ case OCT_DEV_IO_QUEUES_DONE:
+ if (wait_for_pending_requests(oct))
+ dev_err(&oct->pci_dev->dev, "There were pending requests\n");
+
+ if (lio_wait_for_instr_fetch(oct))
+ dev_err(&oct->pci_dev->dev, "IQ had pending instructions\n");
+
+ /* Disable the input and output queues now. No more packets will
+ * arrive from Octeon, but we should wait for all packet
+ * processing to finish.
+ */
+ oct->fn_list.disable_io_queues(oct);
+
+ if (lio_wait_for_oq_pkts(oct))
+ dev_err(&oct->pci_dev->dev, "OQ had pending packets\n");
+
+ /* Disable interrupts */
+ oct->fn_list.disable_interrupt(oct->chip);
+
+ /* Release the interrupt line */
+ free_irq(oct->pci_dev->irq, oct);
+
+ if (oct->flags & LIO_FLAG_MSI_ENABLED)
+ pci_disable_msi(oct->pci_dev);
+
+ /* Soft reset the octeon device before exiting */
+ oct->fn_list.soft_reset(oct);
+
+ /* Disable the device, releasing the PCI INT */
+ pci_disable_device(oct->pci_dev);
+
+ /* fallthrough */
+ case OCT_DEV_IN_RESET:
+ case OCT_DEV_DROQ_INIT_DONE:
+ /*atomic_set(&oct->status, OCT_DEV_DROQ_INIT_DONE);*/
+ mdelay(100);
+ for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
+ if (!(oct->io_qmask.oq & (1UL << i)))
+ continue;
+ octeon_delete_droq(oct, i);
+ }
+
+ /* Force any pending handshakes to complete */
+ for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
+ hs = &handshake[i];
+
+ if (hs->pci_dev) {
+ handshake[oct->octeon_id].init_ok = 0;
+ complete(&handshake[oct->octeon_id].init);
+ handshake[oct->octeon_id].started_ok = 0;
+ complete(&handshake[oct->octeon_id].started);
+ }
+ }
+
+ /* fallthrough */
+ case OCT_DEV_RESP_LIST_INIT_DONE:
+ octeon_delete_response_list(oct);
+
+ /* fallthrough */
+ case OCT_DEV_SC_BUFF_POOL_INIT_DONE:
+ octeon_free_sc_buffer_pool(oct);
+
+ /* fallthrough */
+ case OCT_DEV_INSTR_QUEUE_INIT_DONE:
+ for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
+ if (!(oct->io_qmask.iq & (1UL << i)))
+ continue;
+ octeon_delete_instr_queue(oct, i);
+ }
+
+ /* fallthrough */
+ case OCT_DEV_DISPATCH_INIT_DONE:
+ octeon_delete_dispatch_list(oct);
+ cancel_delayed_work_sync(&oct->nic_poll_work.work);
+
+ /* fallthrough */
+ case OCT_DEV_PCI_MAP_DONE:
+ octeon_unmap_pci_barx(oct, 0);
+ octeon_unmap_pci_barx(oct, 1);
+
+ /* fallthrough */
+ case OCT_DEV_BEGIN_STATE:
+ /* Nothing to be done here either */
+ break;
+ } /* end switch(oct->status) */
+
+ tasklet_kill(&oct_priv->droq_tasklet);
+}
+
+/**
+ * \brief Send Rx control command
+ * @param lio per-network private data
+ * @param start_stop whether to start or stop
+ */
+static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
+{
+ struct octnic_ctrl_pkt nctrl;
+ struct octnic_ctrl_params nparams;
+
+ memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
+
+ nctrl.ncmd.s.cmd = OCTNET_CMD_RX_CTL;
+ nctrl.ncmd.s.param1 = lio->linfo.ifidx;
+ nctrl.ncmd.s.param2 = start_stop;
+ nctrl.netpndev = (u64)lio->netdev;
+
+ nparams.resp_order = OCTEON_RESP_NORESPONSE;
+
+ if (octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams) < 0)
+ netif_info(lio, rx_err, lio->netdev, "Failed to send RX Control message\n");
+}
+
+/**
+ * \brief Destroy NIC device interface
+ * @param oct octeon device
+ * @param ifidx which interface to destroy
+ *
+ * Cleanup associated with each interface for an Octeon device when NIC
+ * module is being unloaded or if initialization fails during load.
+ */
+static void liquidio_destroy_nic_device(struct octeon_device *oct, int ifidx)
+{
+ struct net_device *netdev = oct->props[ifidx].netdev;
+ struct lio *lio;
+
+ if (!netdev) {
+ dev_err(&oct->pci_dev->dev, "%s No netdevice ptr for index %d\n",
+ __func__, ifidx);
+ return;
+ }
+
+ lio = GET_LIO(netdev);
+
+ dev_dbg(&oct->pci_dev->dev, "NIC device cleanup\n");
+
+ send_rx_ctrl_cmd(lio, 0);
+
+ if (atomic_read(&lio->ifstate) & LIO_IFSTATE_RUNNING)
+ txqs_stop(netdev);
+
+ if (atomic_read(&lio->ifstate) & LIO_IFSTATE_REGISTERED)
+ unregister_netdev(netdev);
+
+ delete_glist(lio);
+
+ free_netdev(netdev);
+
+ oct->props[ifidx].netdev = NULL;
+}
+
+/**
+ * \brief Stop complete NIC functionality
+ * @param oct octeon device
+ */
+static int liquidio_stop_nic_module(struct octeon_device *oct)
+{
+ int i, j;
+ struct lio *lio;
+
+ dev_dbg(&oct->pci_dev->dev, "Stopping network interfaces\n");
+ if (!oct->ifcount) {
+ dev_err(&oct->pci_dev->dev, "Init for Octeon was not completed\n");
+ return 1;
+ }
+
+ for (i = 0; i < oct->ifcount; i++) {
+ lio = GET_LIO(oct->props[i].netdev);
+ for (j = 0; j < lio->linfo.num_rxpciq; j++)
+ octeon_unregister_droq_ops(oct, lio->linfo.rxpciq[j]);
+ }
+
+ for (i = 0; i < oct->ifcount; i++)
+ liquidio_destroy_nic_device(oct, i);
+
+ dev_dbg(&oct->pci_dev->dev, "Network interfaces stopped\n");
+ return 0;
+}
+
+/**
+ * \brief Cleans up resources at unload time
+ * @param pdev PCI device structure
+ */
+static void liquidio_remove(struct pci_dev *pdev)
+{
+ struct octeon_device *oct_dev = pci_get_drvdata(pdev);
+
+ dev_dbg(&oct_dev->pci_dev->dev, "Stopping device\n");
+
+ if (oct_dev->app_mode && (oct_dev->app_mode == CVM_DRV_NIC_APP))
+ liquidio_stop_nic_module(oct_dev);
+
+ /* Reset the octeon device and cleanup all memory allocated for
+ * the octeon device by driver.
+ */
+ octeon_destroy_resources(oct_dev);
+
+ dev_info(&oct_dev->pci_dev->dev, "Device removed\n");
+
+ /* This octeon device has been removed. Update the global
+ * data structure to reflect this. Free the device structure.
+ */
+ octeon_free_device_mem(oct_dev);
+}
+
+/**
+ * \brief Identify the Octeon device and to map the BAR address space
+ * @param oct octeon device
+ */
+static int octeon_chip_specific_setup(struct octeon_device *oct)
+{
+ u32 dev_id, rev_id;
+ int ret = 1;
+
+ pci_read_config_dword(oct->pci_dev, 0, &dev_id);
+ pci_read_config_dword(oct->pci_dev, 8, &rev_id);
+ oct->rev_id = rev_id & 0xff;
+
+ switch (dev_id) {
+ case OCTEON_CN68XX_PCIID:
+ oct->chip_id = OCTEON_CN68XX;
+ ret = lio_setup_cn68xx_octeon_device(oct);
+ break;
+
+ case OCTEON_CN66XX_PCIID:
+ oct->chip_id = OCTEON_CN66XX;
+ ret = lio_setup_cn66xx_octeon_device(oct);
+ break;
+ default:
+ dev_err(&oct->pci_dev->dev, "Unknown device found (dev_id: %x)\n",
+ dev_id);
+ }
+
+ if (!ret)
+ dev_info(&oct->pci_dev->dev, "CN68XX PASS%d.%d %s\n",
+ OCTEON_MAJOR_REV(oct),
+ OCTEON_MINOR_REV(oct),
+ octeon_get_conf(oct)->card_name);
+
+ return ret;
+}
+
+/**
+ * \brief PCI initialization for each Octeon device.
+ * @param oct octeon device
+ */
+static int octeon_pci_os_setup(struct octeon_device *oct)
+{
+ /* setup PCI stuff first */
+ if (pci_enable_device(oct->pci_dev)) {
+ dev_err(&oct->pci_dev->dev, "pci_enable_device failed\n");
+ return 1;
+ }
+
+ if (dma_set_mask_and_coherent(&oct->pci_dev->dev, DMA_BIT_MASK(64))) {
+ dev_err(&oct->pci_dev->dev, "Unexpected DMA device capability\n");
+ return 1;
+ }
+
+ /* Enable PCI DMA Master. */
+ pci_set_master(oct->pci_dev);
+
+ return 0;
+}
+
+/**
+ * \brief Check Tx queue state for a given network buffer
+ * @param lio per-network private data
+ * @param skb network buffer
+ */
+static inline int check_txq_state(struct lio *lio, struct sk_buff *skb)
+{
+ int q = 0, iq = 0;
+
+ if (netif_is_multiqueue(lio->netdev)) {
+ q = skb->queue_mapping;
+ iq = lio->linfo.txpciq[(q & (lio->linfo.num_txpciq - 1))];
+ } else {
+ iq = lio->txq;
+ }
+
+ if (octnet_iq_is_full(lio->oct_dev, iq))
+ return 0;
+ wake_q(lio->netdev, q);
+ return 1;
+}
+
+/**
+ * \brief Unmap and free network buffer
+ * @param buf buffer
+ */
+static void free_netbuf(void *buf)
+{
+ struct sk_buff *skb;
+ struct octnet_buf_free_info *finfo;
+ struct lio *lio;
+
+ finfo = (struct octnet_buf_free_info *)buf;
+ skb = finfo->skb;
+ lio = finfo->lio;
+
+ dma_unmap_single(&lio->oct_dev->pci_dev->dev, finfo->dptr, skb->len,
+ DMA_TO_DEVICE);
+
+ check_txq_state(lio, skb);
+
+ recv_buffer_free((struct sk_buff *)skb);
+}
+
+/**
+ * \brief Unmap and free gather buffer
+ * @param buf buffer
+ */
+static void free_netsgbuf(void *buf)
+{
+ struct octnet_buf_free_info *finfo;
+ struct sk_buff *skb;
+ struct lio *lio;
+ struct octnic_gather *g;
+ int i, frags;
+
+ finfo = (struct octnet_buf_free_info *)buf;
+ skb = finfo->skb;
+ lio = finfo->lio;
+ g = finfo->g;
+ frags = skb_shinfo(skb)->nr_frags;
+
+ dma_unmap_single(&lio->oct_dev->pci_dev->dev,
+ g->sg[0].ptr[0], (skb->len - skb->data_len),
+ DMA_TO_DEVICE);
+
+ i = 1;
+ while (frags--) {
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
+
+ pci_unmap_page((lio->oct_dev)->pci_dev,
+ g->sg[(i >> 2)].ptr[(i & 3)],
+ frag->size, DMA_TO_DEVICE);
+ i++;
+ }
+
+ dma_unmap_single(&lio->oct_dev->pci_dev->dev,
+ finfo->dptr, g->sg_size,
+ DMA_TO_DEVICE);
+
+ spin_lock(&lio->lock);
+ list_add_tail(&g->list, &lio->glist);
+ spin_unlock(&lio->lock);
+
+ check_txq_state(lio, skb); /* mq support: sub-queue state check */
+
+ recv_buffer_free((struct sk_buff *)skb);
+}
+
+/**
+ * \brief Unmap and free gather buffer with response
+ * @param buf buffer
+ */
+static void free_netsgbuf_with_resp(void *buf)
+{
+ struct octeon_soft_command *sc;
+ struct octnet_buf_free_info *finfo;
+ struct sk_buff *skb;
+ struct lio *lio;
+ struct octnic_gather *g;
+ int i, frags;
+
+ sc = (struct octeon_soft_command *)buf;
+ skb = (struct sk_buff *)sc->callback_arg;
+ finfo = (struct octnet_buf_free_info *)&skb->cb;
+
+ lio = finfo->lio;
+ g = finfo->g;
+ frags = skb_shinfo(skb)->nr_frags;
+
+ dma_unmap_single(&lio->oct_dev->pci_dev->dev,
+ g->sg[0].ptr[0], (skb->len - skb->data_len),
+ DMA_TO_DEVICE);
+
+ i = 1;
+ while (frags--) {
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
+
+ pci_unmap_page((lio->oct_dev)->pci_dev,
+ g->sg[(i >> 2)].ptr[(i & 3)],
+ frag->size, DMA_TO_DEVICE);
+ i++;
+ }
+
+ dma_unmap_single(&lio->oct_dev->pci_dev->dev,
+ finfo->dptr, g->sg_size,
+ DMA_TO_DEVICE);
+
+ spin_lock(&lio->lock);
+ list_add_tail(&g->list, &lio->glist);
+ spin_unlock(&lio->lock);
+
+ /* Don't free the skb yet */
+
+ check_txq_state(lio, skb);
+}
+
+/**
+ * \brief Adjust ptp frequency
+ * @param ptp PTP clock info
+ * @param ppb how much to adjust by, in parts-per-billion
+ */
+static int liquidio_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
+{
+ struct lio *lio = container_of(ptp, struct lio, ptp_info);
+ struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
+ u64 comp, delta;
+ unsigned long flags;
+ bool neg_adj = false;
+
+ if (ppb < 0) {
+ neg_adj = true;
+ ppb = -ppb;
+ }
+
+ /* The hardware adds the clock compensation value to the
+ * PTP clock on every coprocessor clock cycle, so we
+ * compute the delta in terms of coprocessor clocks.
+ */
+ delta = (u64)ppb << 32;
+ do_div(delta, oct->coproc_clock_rate);
+
+ spin_lock_irqsave(&lio->ptp_lock, flags);
+ comp = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_COMP);
+ if (neg_adj)
+ comp -= delta;
+ else
+ comp += delta;
+ lio_pci_writeq(oct, comp, CN6XXX_MIO_PTP_CLOCK_COMP);
+ spin_unlock_irqrestore(&lio->ptp_lock, flags);
+
+ return 0;
+}
+
+/**
+ * \brief Adjust ptp time
+ * @param ptp PTP clock info
+ * @param delta how much to adjust by, in nanosecs
+ */
+static int liquidio_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ unsigned long flags;
+ struct lio *lio = container_of(ptp, struct lio, ptp_info);
+
+ spin_lock_irqsave(&lio->ptp_lock, flags);
+ lio->ptp_adjust += delta;
+ spin_unlock_irqrestore(&lio->ptp_lock, flags);
+
+ return 0;
+}
+
+/**
+ * \brief Get hardware clock time, including any adjustment
+ * @param ptp PTP clock info
+ * @param ts timespec
+ */
+static int liquidio_ptp_gettime(struct ptp_clock_info *ptp,
+ struct timespec64 *ts)
+{
+ u64 ns;
+ u32 remainder;
+ unsigned long flags;
+ struct lio *lio = container_of(ptp, struct lio, ptp_info);
+ struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
+
+ spin_lock_irqsave(&lio->ptp_lock, flags);
+ ns = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_HI);
+ ns += lio->ptp_adjust;
+ spin_unlock_irqrestore(&lio->ptp_lock, flags);
+
+ ts->tv_sec = div_u64_rem(ns, 1000000000ULL, &remainder);
+ ts->tv_nsec = remainder;
+
+ return 0;
+}
+
+/**
+ * \brief Set hardware clock time. Reset adjustment
+ * @param ptp PTP clock info
+ * @param ts timespec
+ */
+static int liquidio_ptp_settime(struct ptp_clock_info *ptp,
+ const struct timespec64 *ts)
+{
+ u64 ns;
+ unsigned long flags;
+ struct lio *lio = container_of(ptp, struct lio, ptp_info);
+ struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
+
+ ns = timespec_to_ns(ts);
+
+ spin_lock_irqsave(&lio->ptp_lock, flags);
+ lio_pci_writeq(oct, ns, CN6XXX_MIO_PTP_CLOCK_HI);
+ lio->ptp_adjust = 0;
+ spin_unlock_irqrestore(&lio->ptp_lock, flags);
+
+ return 0;
+}
+
+/**
+ * \brief Check if PTP is enabled
+ * @param ptp PTP clock info
+ * @param rq request
+ * @param on is it on
+ */
+static int liquidio_ptp_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on)
+{
+ return -EOPNOTSUPP;
+}
+
+/**
+ * \brief Open PTP clock source
+ * @param netdev network device
+ */
+static void oct_ptp_open(struct net_device *netdev)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
+
+ spin_lock_init(&lio->ptp_lock);
+
+ snprintf(lio->ptp_info.name, 16, "%s", netdev->name);
+ lio->ptp_info.owner = THIS_MODULE;
+ lio->ptp_info.max_adj = 250000000;
+ lio->ptp_info.n_alarm = 0;
+ lio->ptp_info.n_ext_ts = 0;
+ lio->ptp_info.n_per_out = 0;
+ lio->ptp_info.pps = 0;
+ lio->ptp_info.adjfreq = liquidio_ptp_adjfreq;
+ lio->ptp_info.adjtime = liquidio_ptp_adjtime;
+ lio->ptp_info.gettime64 = liquidio_ptp_gettime;
+ lio->ptp_info.settime64 = liquidio_ptp_settime;
+ lio->ptp_info.enable = liquidio_ptp_enable;
+
+ lio->ptp_adjust = 0;
+
+ lio->ptp_clock = ptp_clock_register(&lio->ptp_info,
+ &oct->pci_dev->dev);
+
+ if (IS_ERR(lio->ptp_clock))
+ lio->ptp_clock = NULL;
+}
+
+/**
+ * \brief Init PTP clock
+ * @param oct octeon device
+ */
+static void liquidio_ptp_init(struct octeon_device *oct)
+{
+ u64 clock_comp, cfg;
+
+ clock_comp = (u64)NSEC_PER_SEC << 32;
+ do_div(clock_comp, oct->coproc_clock_rate);
+ lio_pci_writeq(oct, clock_comp, CN6XXX_MIO_PTP_CLOCK_COMP);
+
+ /* Enable */
+ cfg = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_CFG);
+ lio_pci_writeq(oct, cfg | 0x01, CN6XXX_MIO_PTP_CLOCK_CFG);
+}
+
+/**
+ * \brief Load firmware to device
+ * @param oct octeon device
+ *
+ * Maps device to firmware filename, requests firmware, and downloads it
+ */
+static int load_firmware(struct octeon_device *oct)
+{
+ int ret = 0;
+ const struct firmware *fw;
+ char fw_name[LIO_MAX_FW_FILENAME_LEN];
+ char *tmp_fw_type;
+
+ if (strncmp(fw_type, LIO_FW_NAME_TYPE_NONE,
+ sizeof(LIO_FW_NAME_TYPE_NONE)) == 0) {
+ dev_info(&oct->pci_dev->dev, "Skipping firmware load\n");
+ return ret;
+ }
+
+ if (fw_type[0] == '\0')
+ tmp_fw_type = LIO_FW_NAME_TYPE_NIC;
+ else
+ tmp_fw_type = fw_type;
+
+ sprintf(fw_name, "%s%s%s_%s%s", LIO_FW_DIR, LIO_FW_BASE_NAME,
+ octeon_get_conf(oct)->card_name, tmp_fw_type,
+ LIO_FW_NAME_SUFFIX);
+
+ ret = request_firmware(&fw, fw_name, &oct->pci_dev->dev);
+ if (ret) {
+ dev_err(&oct->pci_dev->dev, "Request firmware failed. Could not find file %s.\n.",
+ fw_name);
+ return ret;
+ }
+
+ ret = octeon_download_firmware(oct, fw->data, fw->size);
+
+ release_firmware(fw);
+
+ return ret;
+}
+
+/**
+ * \brief Setup output queue
+ * @param oct octeon device
+ * @param q_no which queue
+ * @param num_descs how many descriptors
+ * @param desc_size size of each descriptor
+ * @param app_ctx application context
+ */
+static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs,
+ int desc_size, void *app_ctx)
+{
+ int ret_val = 0;
+
+ dev_dbg(&oct->pci_dev->dev, "Creating Droq: %d\n", q_no);
+ /* droq creation and local register settings. */
+ ret_val = octeon_create_droq(oct, q_no, num_descs, desc_size, app_ctx);
+ if (ret_val == -1)
+ return ret_val;
+
+ if (ret_val == 1) {
+ dev_dbg(&oct->pci_dev->dev, "Using default droq %d\n", q_no);
+ return 0;
+ }
+ /* tasklet creation for the droq */
+
+ /* Enable the droq queues */
+ octeon_set_droq_pkt_op(oct, q_no, 1);
+
+ /* Send Credit for Octeon Output queues. Credits are always
+ * sent after the output queue is enabled.
+ */
+ writel(oct->droq[q_no]->max_count,
+ oct->droq[q_no]->pkts_credit_reg);
+
+ return ret_val;
+}
+
+/**
+ * \brief Callback for getting interface configuration
+ * @param status status of request
+ * @param buf pointer to resp structure
+ */
+static void if_cfg_callback(struct octeon_device *oct,
+ u32 status,
+ void *buf)
+{
+ struct octeon_soft_command *sc = (struct octeon_soft_command *)buf;
+ struct liquidio_if_cfg_resp *resp;
+ struct liquidio_if_cfg_context *ctx;
+
+ resp = (struct liquidio_if_cfg_resp *)sc->virtrptr;
+ ctx = (struct liquidio_if_cfg_context *)sc->ctxptr;
+
+ oct = lio_get_device(ctx->octeon_id);
+ if (resp->status)
+ dev_err(&oct->pci_dev->dev, "nic if cfg instruction failed. Status: %llx\n",
+ CVM_CAST64(resp->status));
+ ACCESS_ONCE(ctx->cond) = 1;
+
+ /* This barrier is required to be sure that the response has been
+ * written fully before waking up the handler
+ */
+ wmb();
+
+ wake_up_interruptible(&ctx->wc);
+}
+
+/**
+ * \brief Select queue based on hash
+ * @param dev Net device
+ * @param skb sk_buff structure
+ * @returns selected queue number
+ */
+static u16 select_q(struct net_device *dev, struct sk_buff *skb,
+ void *accel_priv, select_queue_fallback_t fallback)
+{
+ int qindex;
+ struct lio *lio;
+
+ lio = GET_LIO(dev);
+ /* select queue on chosen queue_mapping or core */
+ qindex = skb_rx_queue_recorded(skb) ?
+ skb_get_rx_queue(skb) : smp_processor_id();
+ return (u16)(qindex & (lio->linfo.num_txpciq - 1));
+}
+
+/** Routine to push packets arriving on Octeon interface upto network layer.
+ * @param oct_id - octeon device id.
+ * @param skbuff - skbuff struct to be passed to network layer.
+ * @param len - size of total data received.
+ * @param rh - Control header associated with the packet
+ * @param param - additional control data with the packet
+ */
+static void
+liquidio_push_packet(u32 octeon_id,
+ void *skbuff,
+ u32 len,
+ union octeon_rh *rh,
+ void *param)
+{
+ struct napi_struct *napi = param;
+ struct octeon_device *oct = lio_get_device(octeon_id);
+ struct sk_buff *skb = (struct sk_buff *)skbuff;
+ struct skb_shared_hwtstamps *shhwtstamps;
+ u64 ns;
+ struct net_device *netdev =
+ (struct net_device *)oct->props[rh->r_dh.link].netdev;
+ struct octeon_droq *droq = container_of(param, struct octeon_droq,
+ napi);
+ if (netdev) {
+ int packet_was_received;
+ struct lio *lio = GET_LIO(netdev);
+
+ /* Do not proceed if the interface is not in RUNNING state. */
+ if (!ifstate_check(lio, LIO_IFSTATE_RUNNING)) {
+ recv_buffer_free(skb);
+ droq->stats.rx_dropped++;
+ return;
+ }
+
+ skb->dev = netdev;
+
+ if (rh->r_dh.has_hwtstamp) {
+ /* timestamp is included from the hardware at the
+ * beginning of the packet.
+ */
+ if (ifstate_check(lio,
+ LIO_IFSTATE_RX_TIMESTAMP_ENABLED)) {
+ /* Nanoseconds are in the first 64-bits
+ * of the packet.
+ */
+ memcpy(&ns, (skb->data), sizeof(ns));
+ shhwtstamps = skb_hwtstamps(skb);
+ shhwtstamps->hwtstamp =
+ ns_to_ktime(ns + lio->ptp_adjust);
+ }
+ skb_pull(skb, sizeof(ns));
+ }
+
+ skb->protocol = eth_type_trans(skb, skb->dev);
+
+ if ((netdev->features & NETIF_F_RXCSUM) &&
+ (rh->r_dh.csum_verified == CNNIC_CSUM_VERIFIED))
+ /* checksum has already been verified */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ packet_was_received = napi_gro_receive(napi, skb) != GRO_DROP;
+
+ if (packet_was_received) {
+ droq->stats.rx_bytes_received += len;
+ droq->stats.rx_pkts_received++;
+ netdev->last_rx = jiffies;
+ } else {
+ droq->stats.rx_dropped++;
+ netif_info(lio, rx_err, lio->netdev,
+ "droq:%d error rx_dropped:%llu\n",
+ droq->q_no, droq->stats.rx_dropped);
+ }
+
+ } else {
+ recv_buffer_free(skb);
+ }
+}
+
+/**
+ * \brief wrapper for calling napi_schedule
+ * @param param parameters to pass to napi_schedule
+ *
+ * Used when scheduling on different CPUs
+ */
+static void napi_schedule_wrapper(void *param)
+{
+ struct napi_struct *napi = param;
+
+ napi_schedule(napi);
+}
+
+/**
+ * \brief callback when receive interrupt occurs and we are in NAPI mode
+ * @param arg pointer to octeon output queue
+ */
+static void liquidio_napi_drv_callback(void *arg)
+{
+ struct octeon_droq *droq = arg;
+ int this_cpu = smp_processor_id();
+
+ if (droq->cpu_id == this_cpu) {
+ napi_schedule(&droq->napi);
+ } else {
+ struct call_single_data *csd = &droq->csd;
+
+ csd->func = napi_schedule_wrapper;
+ csd->info = &droq->napi;
+ csd->flags = 0;
+
+ smp_call_function_single_async(droq->cpu_id, csd);
+ }
+}
+
+/**
+ * \brief Main NAPI poll function
+ * @param droq octeon output queue
+ * @param budget maximum number of items to process
+ */
+static int liquidio_napi_do_rx(struct octeon_droq *droq, int budget)
+{
+ int work_done;
+ struct lio *lio = GET_LIO(droq->napi.dev);
+ struct octeon_device *oct = lio->oct_dev;
+
+ work_done = octeon_process_droq_poll_cmd(oct, droq->q_no,
+ POLL_EVENT_PROCESS_PKTS,
+ budget);
+ if (work_done < 0) {
+ netif_info(lio, rx_err, lio->netdev,
+ "Receive work_done < 0, rxq:%d\n", droq->q_no);
+ goto octnet_napi_finish;
+ }
+
+ if (work_done > budget)
+ dev_err(&oct->pci_dev->dev, ">>>> %s work_done: %d budget: %d\n",
+ __func__, work_done, budget);
+
+ return work_done;
+
+octnet_napi_finish:
+ napi_complete(&droq->napi);
+ octeon_process_droq_poll_cmd(oct, droq->q_no, POLL_EVENT_ENABLE_INTR,
+ 0);
+ return 0;
+}
+
+/**
+ * \brief Entry point for NAPI polling
+ * @param napi NAPI structure
+ * @param budget maximum number of items to process
+ */
+static int liquidio_napi_poll(struct napi_struct *napi, int budget)
+{
+ struct octeon_droq *droq;
+ int work_done;
+
+ droq = container_of(napi, struct octeon_droq, napi);
+
+ work_done = liquidio_napi_do_rx(droq, budget);
+
+ if (work_done < budget) {
+ napi_complete(napi);
+ octeon_process_droq_poll_cmd(droq->oct_dev, droq->q_no,
+ POLL_EVENT_ENABLE_INTR, 0);
+ return 0;
+ }
+
+ return work_done;
+}
+
+/**
+ * \brief Setup input and output queues
+ * @param octeon_dev octeon device
+ * @param net_device Net device
+ *
+ * Note: Queues are with respect to the octeon device. Thus
+ * an input queue is for egress packets, and output queues
+ * are for ingress packets.
+ */
+static inline int setup_io_queues(struct octeon_device *octeon_dev,
+ struct net_device *net_device)
+{
+ static int first_time = 1;
+ static struct octeon_droq_ops droq_ops;
+ static int cpu_id;
+ static int cpu_id_modulus;
+ struct octeon_droq *droq;
+ struct napi_struct *napi;
+ int q, q_no, retval = 0;
+ struct lio *lio;
+ int num_tx_descs;
+
+ lio = GET_LIO(net_device);
+ if (first_time) {
+ first_time = 0;
+ memset(&droq_ops, 0, sizeof(struct octeon_droq_ops));
+
+ droq_ops.fptr = liquidio_push_packet;
+
+ droq_ops.poll_mode = 1;
+ droq_ops.napi_fn = liquidio_napi_drv_callback;
+ cpu_id = 0;
+ cpu_id_modulus = num_present_cpus();
+ }
+
+ /* set up DROQs. */
+ for (q = 0; q < lio->linfo.num_rxpciq; q++) {
+ q_no = lio->linfo.rxpciq[q];
+
+ retval = octeon_setup_droq(octeon_dev, q_no,
+ CFG_GET_NUM_RX_DESCS_NIC_IF
+ (octeon_get_conf(octeon_dev),
+ lio->ifidx),
+ CFG_GET_NUM_RX_BUF_SIZE_NIC_IF
+ (octeon_get_conf(octeon_dev),
+ lio->ifidx), NULL);
+ if (retval) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ " %s : Runtime DROQ(RxQ) creation failed.\n",
+ __func__);
+ return 1;
+ }
+
+ droq = octeon_dev->droq[q_no];
+ napi = &droq->napi;
+ netif_napi_add(net_device, napi, liquidio_napi_poll, 64);
+
+ /* designate a CPU for this droq */
+ droq->cpu_id = cpu_id;
+ cpu_id++;
+ if (cpu_id >= cpu_id_modulus)
+ cpu_id = 0;
+
+ octeon_register_droq_ops(octeon_dev, q_no, &droq_ops);
+ }
+
+ /* set up IQs. */
+ for (q = 0; q < lio->linfo.num_txpciq; q++) {
+ num_tx_descs = CFG_GET_NUM_TX_DESCS_NIC_IF(octeon_get_conf
+ (octeon_dev),
+ lio->ifidx);
+ retval = octeon_setup_iq(octeon_dev, lio->linfo.txpciq[q],
+ num_tx_descs,
+ netdev_get_tx_queue(net_device, q));
+ if (retval) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ " %s : Runtime IQ(TxQ) creation failed.\n",
+ __func__);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * \brief Poll routine for checking transmit queue status
+ * @param work work_struct data structure
+ */
+static void octnet_poll_check_txq_status(struct work_struct *work)
+{
+ struct cavium_wk *wk = (struct cavium_wk *)work;
+ struct lio *lio = (struct lio *)wk->ctxptr;
+
+ if (!ifstate_check(lio, LIO_IFSTATE_RUNNING))
+ return;
+
+ check_txq_status(lio);
+ queue_delayed_work(lio->txq_status_wq.wq,
+ &lio->txq_status_wq.wk.work, msecs_to_jiffies(1));
+}
+
+/**
+ * \brief Sets up the txq poll check
+ * @param netdev network device
+ */
+static inline void setup_tx_poll_fn(struct net_device *netdev)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+
+ lio->txq_status_wq.wq = create_workqueue("txq-status");
+ if (!lio->txq_status_wq.wq) {
+ dev_err(&oct->pci_dev->dev, "unable to create cavium txq status wq\n");
+ return;
+ }
+ INIT_DELAYED_WORK(&lio->txq_status_wq.wk.work,
+ octnet_poll_check_txq_status);
+ lio->txq_status_wq.wk.ctxptr = lio;
+ queue_delayed_work(lio->txq_status_wq.wq,
+ &lio->txq_status_wq.wk.work, msecs_to_jiffies(1));
+}
+
+/**
+ * \brief Net device open for LiquidIO
+ * @param netdev network device
+ */
+static int liquidio_open(struct net_device *netdev)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct napi_struct *napi, *n;
+
+ list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list)
+ napi_enable(napi);
+
+ oct_ptp_open(netdev);
+
+ ifstate_set(lio, LIO_IFSTATE_RUNNING);
+ setup_tx_poll_fn(netdev);
+ start_txq(netdev);
+
+ netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n");
+ try_module_get(THIS_MODULE);
+
+ /* tell Octeon to start forwarding packets to host */
+ send_rx_ctrl_cmd(lio, 1);
+
+ /* Ready for link status updates */
+ lio->intf_open = 1;
+
+ dev_info(&oct->pci_dev->dev, "%s interface is opened\n",
+ netdev->name);
+
+ return 0;
+}
+
+/**
+ * \brief Net device stop for LiquidIO
+ * @param netdev network device
+ */
+static int liquidio_stop(struct net_device *netdev)
+{
+ struct napi_struct *napi, *n;
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+
+ netif_info(lio, ifdown, lio->netdev, "Stopping interface!\n");
+ /* Inform that netif carrier is down */
+ lio->intf_open = 0;
+ lio->linfo.link.s.status = 0;
+
+ netif_carrier_off(netdev);
+
+ /* tell Octeon to stop forwarding packets to host */
+ send_rx_ctrl_cmd(lio, 0);
+
+ cancel_delayed_work_sync(&lio->txq_status_wq.wk.work);
+ flush_workqueue(lio->txq_status_wq.wq);
+ destroy_workqueue(lio->txq_status_wq.wq);
+
+ if (lio->ptp_clock) {
+ ptp_clock_unregister(lio->ptp_clock);
+ lio->ptp_clock = NULL;
+ }
+
+ ifstate_reset(lio, LIO_IFSTATE_RUNNING);
+
+ /* This is a hack that allows DHCP to continue working. */
+ set_bit(__LINK_STATE_START, &lio->netdev->state);
+
+ list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list)
+ napi_disable(napi);
+
+ txqs_stop(netdev);
+
+ dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);
+ module_put(THIS_MODULE);
+
+ return 0;
+}
+
+void liquidio_link_ctrl_cmd_completion(void *nctrl_ptr)
+{
+ struct octnic_ctrl_pkt *nctrl = (struct octnic_ctrl_pkt *)nctrl_ptr;
+ struct net_device *netdev = (struct net_device *)nctrl->netpndev;
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+
+ switch (nctrl->ncmd.s.cmd) {
+ case OCTNET_CMD_CHANGE_DEVFLAGS:
+ case OCTNET_CMD_SET_MULTI_LIST:
+ break;
+
+ case OCTNET_CMD_CHANGE_MACADDR:
+ /* If command is successful, change the MACADDR. */
+ netif_info(lio, probe, lio->netdev, " MACAddr changed to 0x%llx\n",
+ CVM_CAST64(nctrl->udd[0]));
+ dev_info(&oct->pci_dev->dev, "%s MACAddr changed to 0x%llx\n",
+ netdev->name, CVM_CAST64(nctrl->udd[0]));
+ memcpy(netdev->dev_addr, ((u8 *)&nctrl->udd[0]) + 2, ETH_ALEN);
+ break;
+
+ case OCTNET_CMD_CHANGE_MTU:
+ /* If command is successful, change the MTU. */
+ netif_info(lio, probe, lio->netdev, " MTU Changed from %d to %d\n",
+ netdev->mtu, nctrl->ncmd.s.param2);
+ dev_info(&oct->pci_dev->dev, "%s MTU Changed from %d to %d\n",
+ netdev->name, netdev->mtu,
+ nctrl->ncmd.s.param2);
+ netdev->mtu = nctrl->ncmd.s.param2;
+ break;
+
+ case OCTNET_CMD_GPIO_ACCESS:
+ netif_info(lio, probe, lio->netdev, "LED Flashing visual identification\n");
+
+ break;
+
+ case OCTNET_CMD_LRO_ENABLE:
+ dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name);
+ break;
+
+ case OCTNET_CMD_LRO_DISABLE:
+ dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n",
+ netdev->name);
+ break;
+
+ case OCTNET_CMD_VERBOSE_ENABLE:
+ dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name);
+ break;
+
+ case OCTNET_CMD_VERBOSE_DISABLE:
+ dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n",
+ netdev->name);
+ break;
+
+ case OCTNET_CMD_SET_SETTINGS:
+ dev_info(&oct->pci_dev->dev, "%s settings changed\n",
+ netdev->name);
+
+ break;
+
+ default:
+ dev_err(&oct->pci_dev->dev, "%s Unknown cmd %d\n", __func__,
+ nctrl->ncmd.s.cmd);
+ }
+}
+
+/**
+ * \brief Converts a mask based on net device flags
+ * @param netdev network device
+ *
+ * This routine generates a octnet_ifflags mask from the net device flags
+ * received from the OS.
+ */
+static inline enum octnet_ifflags get_new_flags(struct net_device *netdev)
+{
+ enum octnet_ifflags f = OCTNET_IFFLAG_UNICAST;
+
+ if (netdev->flags & IFF_PROMISC)
+ f |= OCTNET_IFFLAG_PROMISC;
+
+ if (netdev->flags & IFF_ALLMULTI)
+ f |= OCTNET_IFFLAG_ALLMULTI;
+
+ if (netdev->flags & IFF_MULTICAST) {
+ f |= OCTNET_IFFLAG_MULTICAST;
+
+ /* Accept all multicast addresses if there are more than we
+ * can handle
+ */
+ if (netdev_mc_count(netdev) > MAX_OCTEON_MULTICAST_ADDR)
+ f |= OCTNET_IFFLAG_ALLMULTI;
+ }
+
+ if (netdev->flags & IFF_BROADCAST)
+ f |= OCTNET_IFFLAG_BROADCAST;
+
+ return f;
+}
+
+/**
+ * \brief Net device set_multicast_list
+ * @param netdev network device
+ */
+static void liquidio_set_mcast_list(struct net_device *netdev)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct octnic_ctrl_pkt nctrl;
+ struct octnic_ctrl_params nparams;
+ struct netdev_hw_addr *ha;
+ u64 *mc;
+ int ret, i;
+ int mc_count = min(netdev_mc_count(netdev), MAX_OCTEON_MULTICAST_ADDR);
+
+ memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
+
+ /* Create a ctrl pkt command to be sent to core app. */
+ nctrl.ncmd.u64 = 0;
+ nctrl.ncmd.s.cmd = OCTNET_CMD_SET_MULTI_LIST;
+ nctrl.ncmd.s.param1 = lio->linfo.ifidx;
+ nctrl.ncmd.s.param2 = get_new_flags(netdev);
+ nctrl.ncmd.s.param3 = mc_count;
+ nctrl.ncmd.s.more = mc_count;
+ nctrl.netpndev = (u64)netdev;
+ nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
+
+ /* copy all the addresses into the udd */
+ i = 0;
+ mc = &nctrl.udd[0];
+ netdev_for_each_mc_addr(ha, netdev) {
+ *mc = 0;
+ memcpy(((u8 *)mc) + 2, ha->addr, ETH_ALEN);
+ /* no need to swap bytes */
+
+ if (++mc > &nctrl.udd[mc_count])
+ break;
+ }
+
+ /* Apparently, any activity in this call from the kernel has to
+ * be atomic. So we won't wait for response.
+ */
+ nctrl.wait_time = 0;
+
+ nparams.resp_order = OCTEON_RESP_NORESPONSE;
+
+ ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
+ if (ret < 0) {
+ dev_err(&oct->pci_dev->dev, "DEVFLAGS change failed in core (ret: 0x%x)\n",
+ ret);
+ }
+}
+
+/**
+ * \brief Net device set_mac_address
+ * @param netdev network device
+ */
+static int liquidio_set_mac(struct net_device *netdev, void *p)
+{
+ int ret = 0;
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct sockaddr *addr = (struct sockaddr *)p;
+ struct octnic_ctrl_pkt nctrl;
+ struct octnic_ctrl_params nparams;
+
+ if ((!is_valid_ether_addr(addr->sa_data)) ||
+ (ifstate_check(lio, LIO_IFSTATE_RUNNING)))
+ return -EADDRNOTAVAIL;
+
+ memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
+
+ nctrl.ncmd.u64 = 0;
+ nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MACADDR;
+ nctrl.ncmd.s.param1 = lio->linfo.ifidx;
+ nctrl.ncmd.s.param2 = 0;
+ nctrl.ncmd.s.more = 1;
+ nctrl.netpndev = (u64)netdev;
+ nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
+ nctrl.wait_time = 100;
+
+ nctrl.udd[0] = 0;
+ /* The MAC Address is presented in network byte order. */
+ memcpy((u8 *)&nctrl.udd[0] + 2, addr->sa_data, ETH_ALEN);
+
+ nparams.resp_order = OCTEON_RESP_ORDERED;
+
+ ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
+ if (ret < 0) {
+ dev_err(&oct->pci_dev->dev, "MAC Address change failed\n");
+ return -ENOMEM;
+ }
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(((u8 *)&lio->linfo.hw_addr) + 2, addr->sa_data, ETH_ALEN);
+
+ return 0;
+}
+
+/**
+ * \brief Net device get_stats
+ * @param netdev network device
+ */
+static struct net_device_stats *liquidio_get_stats(struct net_device *netdev)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct net_device_stats *stats = &netdev->stats;
+ struct octeon_device *oct;
+ u64 pkts = 0, drop = 0, bytes = 0;
+ struct oct_droq_stats *oq_stats;
+ struct oct_iq_stats *iq_stats;
+ int i, iq_no, oq_no;
+
+ oct = lio->oct_dev;
+
+ for (i = 0; i < lio->linfo.num_txpciq; i++) {
+ iq_no = lio->linfo.txpciq[i];
+ iq_stats = &oct->instr_queue[iq_no]->stats;
+ pkts += iq_stats->tx_done;
+ drop += iq_stats->tx_dropped;
+ bytes += iq_stats->tx_tot_bytes;
+ }
+
+ stats->tx_packets = pkts;
+ stats->tx_bytes = bytes;
+ stats->tx_dropped = drop;
+
+ pkts = 0;
+ drop = 0;
+ bytes = 0;
+
+ for (i = 0; i < lio->linfo.num_rxpciq; i++) {
+ oq_no = lio->linfo.rxpciq[i];
+ oq_stats = &oct->droq[oq_no]->stats;
+ pkts += oq_stats->rx_pkts_received;
+ drop += (oq_stats->rx_dropped +
+ oq_stats->dropped_nodispatch +
+ oq_stats->dropped_toomany +
+ oq_stats->dropped_nomem);
+ bytes += oq_stats->rx_bytes_received;
+ }
+
+ stats->rx_bytes = bytes;
+ stats->rx_packets = pkts;
+ stats->rx_dropped = drop;
+
+ return stats;
+}
+
+/**
+ * \brief Net device change_mtu
+ * @param netdev network device
+ */
+static int liquidio_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct octnic_ctrl_pkt nctrl;
+ struct octnic_ctrl_params nparams;
+ int max_frm_size = new_mtu + OCTNET_FRM_HEADER_SIZE;
+ int ret = 0;
+
+ /* Limit the MTU to make sure the ethernet packets are between 64 bytes
+ * and 65535 bytes
+ */
+ if ((max_frm_size < OCTNET_MIN_FRM_SIZE) ||
+ (max_frm_size > OCTNET_MAX_FRM_SIZE)) {
+ dev_err(&oct->pci_dev->dev, "Invalid MTU: %d\n", new_mtu);
+ dev_err(&oct->pci_dev->dev, "Valid range %d and %d\n",
+ (OCTNET_MIN_FRM_SIZE - OCTNET_FRM_HEADER_SIZE),
+ (OCTNET_MAX_FRM_SIZE - OCTNET_FRM_HEADER_SIZE));
+ return -EINVAL;
+ }
+
+ memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
+
+ nctrl.ncmd.u64 = 0;
+ nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MTU;
+ nctrl.ncmd.s.param1 = lio->linfo.ifidx;
+ nctrl.ncmd.s.param2 = new_mtu;
+ nctrl.wait_time = 100;
+ nctrl.netpndev = (u64)netdev;
+ nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
+
+ nparams.resp_order = OCTEON_RESP_ORDERED;
+
+ ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
+ if (ret < 0) {
+ dev_err(&oct->pci_dev->dev, "Failed to set MTU\n");
+ return -1;
+ }
+
+ lio->mtu = new_mtu;
+
+ return 0;
+}
+
+/**
+ * \brief Handler for SIOCSHWTSTAMP ioctl
+ * @param netdev network device
+ * @param ifr interface request
+ * @param cmd command
+ */
+static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct hwtstamp_config conf;
+ struct lio *lio = GET_LIO(netdev);
+
+ if (copy_from_user(&conf, ifr->ifr_data, sizeof(conf)))
+ return -EFAULT;
+
+ if (conf.flags)
+ return -EINVAL;
+
+ switch (conf.tx_type) {
+ case HWTSTAMP_TX_ON:
+ case HWTSTAMP_TX_OFF:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (conf.rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ break;
+ case HWTSTAMP_FILTER_ALL:
+ case HWTSTAMP_FILTER_SOME:
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ conf.rx_filter = HWTSTAMP_FILTER_ALL;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ if (conf.rx_filter == HWTSTAMP_FILTER_ALL)
+ ifstate_set(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED);
+
+ else
+ ifstate_reset(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED);
+
+ return copy_to_user(ifr->ifr_data, &conf, sizeof(conf)) ? -EFAULT : 0;
+}
+
+/**
+ * \brief ioctl handler
+ * @param netdev network device
+ * @param ifr interface request
+ * @param cmd command
+ */
+static int liquidio_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCSHWTSTAMP:
+ return hwtstamp_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * \brief handle a Tx timestamp response
+ * @param status response status
+ * @param buf pointer to skb
+ */
+static void handle_timestamp(struct octeon_device *oct,
+ u32 status,
+ void *buf)
+{
+ struct octnet_buf_free_info *finfo;
+ struct octeon_soft_command *sc;
+ struct oct_timestamp_resp *resp;
+ struct lio *lio;
+ struct sk_buff *skb = (struct sk_buff *)buf;
+
+ finfo = (struct octnet_buf_free_info *)skb->cb;
+ lio = finfo->lio;
+ sc = finfo->sc;
+ oct = lio->oct_dev;
+ resp = (struct oct_timestamp_resp *)sc->virtrptr;
+
+ if (status != OCTEON_REQUEST_DONE) {
+ dev_err(&oct->pci_dev->dev, "Tx timestamp instruction failed. Status: %llx\n",
+ CVM_CAST64(status));
+ resp->timestamp = 0;
+ }
+
+ octeon_swap_8B_data(&resp->timestamp, 1);
+
+ if (unlikely((skb_shinfo(skb)->tx_flags | SKBTX_IN_PROGRESS) != 0)) {
+ struct skb_shared_hwtstamps ts;
+ u64 ns = resp->timestamp;
+
+ netif_info(lio, tx_done, lio->netdev,
+ "Got resulting SKBTX_HW_TSTAMP skb=%p ns=%016llu\n",
+ skb, (unsigned long long)ns);
+ ts.hwtstamp = ns_to_ktime(ns + lio->ptp_adjust);
+ skb_tstamp_tx(skb, &ts);
+ }
+
+ octeon_free_soft_command(oct, sc);
+ recv_buffer_free(skb);
+}
+
+/* \brief Send a data packet that will be timestamped
+ * @param oct octeon device
+ * @param ndata pointer to network data
+ * @param finfo pointer to private network data
+ */
+static inline int send_nic_timestamp_pkt(struct octeon_device *oct,
+ struct octnic_data_pkt *ndata,
+ struct octnet_buf_free_info *finfo,
+ int xmit_more)
+{
+ int retval;
+ struct octeon_soft_command *sc;
+ struct octeon_instr_ih *ih;
+ struct octeon_instr_rdp *rdp;
+ struct lio *lio;
+ int ring_doorbell;
+
+ lio = finfo->lio;
+
+ sc = octeon_alloc_soft_command_resp(oct, &ndata->cmd,
+ sizeof(struct oct_timestamp_resp));
+ finfo->sc = sc;
+
+ if (!sc) {
+ dev_err(&oct->pci_dev->dev, "No memory for timestamped data packet\n");
+ return IQ_SEND_FAILED;
+ }
+
+ if (ndata->reqtype == REQTYPE_NORESP_NET)
+ ndata->reqtype = REQTYPE_RESP_NET;
+ else if (ndata->reqtype == REQTYPE_NORESP_NET_SG)
+ ndata->reqtype = REQTYPE_RESP_NET_SG;
+
+ sc->callback = handle_timestamp;
+ sc->callback_arg = finfo->skb;
+ sc->iq_no = ndata->q_no;
+
+ ih = (struct octeon_instr_ih *)&sc->cmd.ih;
+ rdp = (struct octeon_instr_rdp *)&sc->cmd.rdp;
+
+ ring_doorbell = !xmit_more;
+ retval = octeon_send_command(oct, sc->iq_no, ring_doorbell, &sc->cmd,
+ sc, ih->dlengsz, ndata->reqtype);
+
+ if (retval) {
+ dev_err(&oct->pci_dev->dev, "timestamp data packet failed status: %x\n",
+ retval);
+ octeon_free_soft_command(oct, sc);
+ } else {
+ netif_info(lio, tx_queued, lio->netdev, "Queued timestamp packet\n");
+ }
+
+ return retval;
+}
+
+static inline int is_ipv4(struct sk_buff *skb)
+{
+ return (skb->protocol == htons(ETH_P_IP)) &&
+ (ip_hdr(skb)->version == 4);
+}
+
+static inline int is_vlan(struct sk_buff *skb)
+{
+ return skb->protocol == htons(ETH_P_8021Q);
+}
+
+static inline int is_ip_fragmented(struct sk_buff *skb)
+{
+ /* The Don't fragment and Reserved flag fields are ignored.
+ * IP is fragmented if
+ * - the More fragments bit is set (indicating this IP is a fragment
+ * with more to follow; the current offset could be 0 ).
+ * - ths offset field is non-zero.
+ */
+ return htons(ip_hdr(skb)->frag_off) & 0x3fff;
+}
+
+static inline int is_ipv6(struct sk_buff *skb)
+{
+ return (skb->protocol == htons(ETH_P_IPV6)) &&
+ (ipv6_hdr(skb)->version == 6);
+}
+
+static inline int is_with_extn_hdr(struct sk_buff *skb)
+{
+ return (ipv6_hdr(skb)->nexthdr != IPPROTO_TCP) &&
+ (ipv6_hdr(skb)->nexthdr != IPPROTO_UDP);
+}
+
+static inline int is_tcpudp(struct sk_buff *skb)
+{
+ return (ip_hdr(skb)->protocol == IPPROTO_TCP) ||
+ (ip_hdr(skb)->protocol == IPPROTO_UDP);
+}
+
+static inline u32 get_ipv4_5tuple_tag(struct sk_buff *skb)
+{
+ u32 tag;
+ struct iphdr *iphdr = ip_hdr(skb);
+
+ tag = crc32(0, &iphdr->protocol, 1);
+ tag = crc32(tag, (u8 *)&iphdr->saddr, 8);
+ tag = crc32(tag, skb_transport_header(skb), 4);
+ return tag;
+}
+
+static inline u32 get_ipv6_5tuple_tag(struct sk_buff *skb)
+{
+ u32 tag;
+ struct ipv6hdr *ipv6hdr = ipv6_hdr(skb);
+
+ tag = crc32(0, &ipv6hdr->nexthdr, 1);
+ tag = crc32(tag, (u8 *)&ipv6hdr->saddr, 32);
+ tag = crc32(tag, skb_transport_header(skb), 4);
+ return tag;
+}
+
+/** \brief Transmit networks packets to the Octeon interface
+ * @param skbuff skbuff struct to be passed to network layer.
+ * @param netdev pointer to network device
+ * @returns whether the packet was transmitted to the device okay or not
+ * (NETDEV_TX_OK or NETDEV_TX_BUSY)
+ */
+static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct lio *lio;
+ struct octnet_buf_free_info *finfo;
+ union octnic_cmd_setup cmdsetup;
+ struct octnic_data_pkt ndata;
+ struct octeon_device *oct;
+ struct oct_iq_stats *stats;
+ int cpu = 0, status = 0;
+ int q_idx = 0, iq_no = 0;
+ int xmit_more;
+ u32 tag = 0;
+
+ lio = GET_LIO(netdev);
+ oct = lio->oct_dev;
+
+ if (netif_is_multiqueue(netdev)) {
+ cpu = skb->queue_mapping;
+ q_idx = (cpu & (lio->linfo.num_txpciq - 1));
+ iq_no = lio->linfo.txpciq[q_idx];
+ } else {
+ iq_no = lio->txq;
+ }
+
+ stats = &oct->instr_queue[iq_no]->stats;
+
+ /* Check for all conditions in which the current packet cannot be
+ * transmitted.
+ */
+ if (!(atomic_read(&lio->ifstate) & LIO_IFSTATE_RUNNING) ||
+ (!lio->linfo.link.s.status) ||
+ (skb->len <= 0)) {
+ netif_info(lio, tx_err, lio->netdev,
+ "Transmit failed link_status : %d\n",
+ lio->linfo.link.s.status);
+ goto lio_xmit_failed;
+ }
+
+ /* Use space in skb->cb to store info used to unmap and
+ * free the buffers.
+ */
+ finfo = (struct octnet_buf_free_info *)skb->cb;
+ finfo->lio = lio;
+ finfo->skb = skb;
+ finfo->sc = NULL;
+
+ /* Prepare the attributes for the data to be passed to OSI. */
+ memset(&ndata, 0, sizeof(struct octnic_data_pkt));
+
+ ndata.buf = (void *)finfo;
+
+ ndata.q_no = iq_no;
+
+ if (netif_is_multiqueue(netdev)) {
+ if (octnet_iq_is_full(oct, ndata.q_no)) {
+ /* defer sending if queue is full */
+ netif_info(lio, tx_err, lio->netdev, "Transmit failed iq:%d full\n",
+ ndata.q_no);
+ stats->tx_iq_busy++;
+ return NETDEV_TX_BUSY;
+ }
+ } else {
+ if (octnet_iq_is_full(oct, lio->txq)) {
+ /* defer sending if queue is full */
+ stats->tx_iq_busy++;
+ netif_info(lio, tx_err, lio->netdev, "Transmit failed iq:%d full\n",
+ ndata.q_no);
+ return NETDEV_TX_BUSY;
+ }
+ }
+ /* pr_info(" XMIT - valid Qs: %d, 1st Q no: %d, cpu: %d, q_no:%d\n",
+ * lio->linfo.num_txpciq, lio->txq, cpu, ndata.q_no );
+ */
+
+ ndata.datasize = skb->len;
+
+ cmdsetup.u64 = 0;
+ cmdsetup.s.ifidx = lio->linfo.ifidx;
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ if (is_ipv4(skb) && !is_ip_fragmented(skb) && is_tcpudp(skb)) {
+ tag = get_ipv4_5tuple_tag(skb);
+
+ cmdsetup.s.cksum_offset = sizeof(struct ethhdr) + 1;
+
+ if (ip_hdr(skb)->ihl > 5)
+ cmdsetup.s.ipv4opts_ipv6exthdr =
+ OCT_PKT_PARAM_IPV4OPTS;
+
+ } else if (is_ipv6(skb)) {
+ tag = get_ipv6_5tuple_tag(skb);
+
+ cmdsetup.s.cksum_offset = sizeof(struct ethhdr) + 1;
+
+ if (is_with_extn_hdr(skb))
+ cmdsetup.s.ipv4opts_ipv6exthdr =
+ OCT_PKT_PARAM_IPV6EXTHDR;
+
+ } else if (is_vlan(skb)) {
+ if (vlan_eth_hdr(skb)->h_vlan_encapsulated_proto
+ == htons(ETH_P_IP) &&
+ !is_ip_fragmented(skb) && is_tcpudp(skb)) {
+ tag = get_ipv4_5tuple_tag(skb);
+
+ cmdsetup.s.cksum_offset =
+ sizeof(struct vlan_ethhdr) + 1;
+
+ if (ip_hdr(skb)->ihl > 5)
+ cmdsetup.s.ipv4opts_ipv6exthdr =
+ OCT_PKT_PARAM_IPV4OPTS;
+
+ } else if (vlan_eth_hdr(skb)->h_vlan_encapsulated_proto
+ == htons(ETH_P_IPV6)) {
+ tag = get_ipv6_5tuple_tag(skb);
+
+ cmdsetup.s.cksum_offset =
+ sizeof(struct vlan_ethhdr) + 1;
+
+ if (is_with_extn_hdr(skb))
+ cmdsetup.s.ipv4opts_ipv6exthdr =
+ OCT_PKT_PARAM_IPV6EXTHDR;
+ }
+ }
+ }
+ if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ cmdsetup.s.timestamp = 1;
+ }
+
+ if (skb_shinfo(skb)->nr_frags == 0) {
+ cmdsetup.s.u.datasize = skb->len;
+ octnet_prepare_pci_cmd(&ndata.cmd, &cmdsetup, tag);
+ /* Offload checksum calculation for TCP/UDP packets */
+ ndata.cmd.dptr = dma_map_single(&oct->pci_dev->dev,
+ skb->data,
+ skb->len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&oct->pci_dev->dev, ndata.cmd.dptr)) {
+ dev_err(&oct->pci_dev->dev, "%s DMA mapping error 1\n",
+ __func__);
+ return NETDEV_TX_BUSY;
+ }
+
+ finfo->dptr = ndata.cmd.dptr;
+
+ ndata.reqtype = REQTYPE_NORESP_NET;
+
+ } else {
+ int i, frags;
+ struct skb_frag_struct *frag;
+ struct octnic_gather *g;
+
+ spin_lock(&lio->lock);
+ g = (struct octnic_gather *)list_delete_head(&lio->glist);
+ spin_unlock(&lio->lock);
+
+ if (!g) {
+ netif_info(lio, tx_err, lio->netdev,
+ "Transmit scatter gather: glist null!\n");
+ goto lio_xmit_failed;
+ }
+
+ cmdsetup.s.gather = 1;
+ cmdsetup.s.u.gatherptrs = (skb_shinfo(skb)->nr_frags + 1);
+ octnet_prepare_pci_cmd(&ndata.cmd, &cmdsetup, tag);
+
+ memset(g->sg, 0, g->sg_size);
+
+ g->sg[0].ptr[0] = dma_map_single(&oct->pci_dev->dev,
+ skb->data,
+ (skb->len - skb->data_len),
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&oct->pci_dev->dev, g->sg[0].ptr[0])) {
+ dev_err(&oct->pci_dev->dev, "%s DMA mapping error 2\n",
+ __func__);
+ return NETDEV_TX_BUSY;
+ }
+ add_sg_size(&g->sg[0], (skb->len - skb->data_len), 0);
+
+ frags = skb_shinfo(skb)->nr_frags;
+ i = 1;
+ while (frags--) {
+ frag = &skb_shinfo(skb)->frags[i - 1];
+
+ g->sg[(i >> 2)].ptr[(i & 3)] =
+ dma_map_page(&oct->pci_dev->dev,
+ frag->page.p,
+ frag->page_offset,
+ frag->size,
+ DMA_TO_DEVICE);
+
+ add_sg_size(&g->sg[(i >> 2)], frag->size, (i & 3));
+ i++;
+ }
+
+ ndata.cmd.dptr = dma_map_single(&oct->pci_dev->dev,
+ g->sg, g->sg_size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&oct->pci_dev->dev, ndata.cmd.dptr)) {
+ dev_err(&oct->pci_dev->dev, "%s DMA mapping error 3\n",
+ __func__);
+ dma_unmap_single(&oct->pci_dev->dev, g->sg[0].ptr[0],
+ skb->len - skb->data_len,
+ DMA_TO_DEVICE);
+ return NETDEV_TX_BUSY;
+ }
+
+ finfo->dptr = ndata.cmd.dptr;
+ finfo->g = g;
+
+ ndata.reqtype = REQTYPE_NORESP_NET_SG;
+ }
+
+ if (skb_shinfo(skb)->gso_size) {
+ struct octeon_instr_irh *irh =
+ (struct octeon_instr_irh *)&ndata.cmd.irh;
+ union tx_info *tx_info = (union tx_info *)&ndata.cmd.ossp[0];
+
+ irh->len = 1; /* to indicate that ossp[0] contains tx_info */
+ tx_info->s.gso_size = skb_shinfo(skb)->gso_size;
+ tx_info->s.gso_segs = skb_shinfo(skb)->gso_segs;
+ }
+
+ xmit_more = skb->xmit_more;
+
+ if (unlikely(cmdsetup.s.timestamp))
+ status = send_nic_timestamp_pkt(oct, &ndata, finfo, xmit_more);
+ else
+ status = octnet_send_nic_data_pkt(oct, &ndata, xmit_more);
+ if (status == IQ_SEND_FAILED)
+ goto lio_xmit_failed;
+
+ netif_info(lio, tx_queued, lio->netdev, "Transmit queued successfully\n");
+
+ if (status == IQ_SEND_STOP)
+ stop_q(lio->netdev, q_idx);
+
+ netdev->trans_start = jiffies;
+
+ stats->tx_done++;
+ stats->tx_tot_bytes += skb->len;
+
+ return NETDEV_TX_OK;
+
+lio_xmit_failed:
+ stats->tx_dropped++;
+ netif_info(lio, tx_err, lio->netdev, "IQ%d Transmit dropped:%llu\n",
+ iq_no, stats->tx_dropped);
+ dma_unmap_single(&oct->pci_dev->dev, ndata.cmd.dptr,
+ ndata.datasize, DMA_TO_DEVICE);
+ recv_buffer_free(skb);
+ return NETDEV_TX_OK;
+}
+
+/** \brief Network device Tx timeout
+ * @param netdev pointer to network device
+ */
+static void liquidio_tx_timeout(struct net_device *netdev)
+{
+ struct lio *lio;
+
+ lio = GET_LIO(netdev);
+
+ netif_info(lio, tx_err, lio->netdev,
+ "Transmit timeout tx_dropped:%ld, waking up queues now!!\n",
+ netdev->stats.tx_dropped);
+ netdev->trans_start = jiffies;
+ txqs_wake(netdev);
+}
+
+int liquidio_set_feature(struct net_device *netdev, int cmd)
+{
+ struct lio *lio = GET_LIO(netdev);
+ struct octeon_device *oct = lio->oct_dev;
+ struct octnic_ctrl_pkt nctrl;
+ struct octnic_ctrl_params nparams;
+ int ret = 0;
+
+ memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
+
+ nctrl.ncmd.u64 = 0;
+ nctrl.ncmd.s.cmd = cmd;
+ nctrl.ncmd.s.param1 = lio->linfo.ifidx;
+ nctrl.ncmd.s.param2 = OCTNIC_LROIPV4 | OCTNIC_LROIPV6;
+ nctrl.wait_time = 100;
+ nctrl.netpndev = (u64)netdev;
+ nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
+
+ nparams.resp_order = OCTEON_RESP_NORESPONSE;
+
+ ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams);
+ if (ret < 0) {
+ dev_err(&oct->pci_dev->dev, "Feature change failed in core (ret: 0x%x)\n",
+ ret);
+ }
+ return ret;
+}
+
+/** \brief Net device fix features
+ * @param netdev pointer to network device
+ * @param request features requested
+ * @returns updated features list
+ */
+static netdev_features_t liquidio_fix_features(struct net_device *netdev,
+ netdev_features_t request)
+{
+ struct lio *lio = netdev_priv(netdev);
+
+ if ((request & NETIF_F_RXCSUM) &&
+ !(lio->dev_capability & NETIF_F_RXCSUM))
+ request &= ~NETIF_F_RXCSUM;
+
+ if ((request & NETIF_F_HW_CSUM) &&
+ !(lio->dev_capability & NETIF_F_HW_CSUM))
+ request &= ~NETIF_F_HW_CSUM;
+
+ if ((request & NETIF_F_TSO) && !(lio->dev_capability & NETIF_F_TSO))
+ request &= ~NETIF_F_TSO;
+
+ if ((request & NETIF_F_TSO6) && !(lio->dev_capability & NETIF_F_TSO6))
+ request &= ~NETIF_F_TSO6;
+
+ if ((request & NETIF_F_LRO) && !(lio->dev_capability & NETIF_F_LRO))
+ request &= ~NETIF_F_LRO;
+
+ /*Disable LRO if RXCSUM is off */
+ if (!(request & NETIF_F_RXCSUM) && (netdev->features & NETIF_F_LRO) &&
+ (lio->dev_capability & NETIF_F_LRO))
+ request &= ~NETIF_F_LRO;
+
+ return request;
+}
+
+/** \brief Net device set features
+ * @param netdev pointer to network device
+ * @param features features to enable/disable
+ */
+static int liquidio_set_features(struct net_device *netdev,
+ netdev_features_t features)
+{
+ struct lio *lio = netdev_priv(netdev);
+
+ if (!((netdev->features ^ features) & NETIF_F_LRO))
+ return 0;
+
+ if ((features & NETIF_F_LRO) && (lio->dev_capability & NETIF_F_LRO))
+ liquidio_set_feature(netdev, OCTNET_CMD_LRO_ENABLE);
+ else if (!(features & NETIF_F_LRO) &&
+ (lio->dev_capability & NETIF_F_LRO))
+ liquidio_set_feature(netdev, OCTNET_CMD_LRO_DISABLE);
+
+ return 0;
+}
+
+static struct net_device_ops lionetdevops = {
+ .ndo_open = liquidio_open,
+ .ndo_stop = liquidio_stop,
+ .ndo_start_xmit = liquidio_xmit,
+ .ndo_get_stats = liquidio_get_stats,
+ .ndo_set_mac_address = liquidio_set_mac,
+ .ndo_set_rx_mode = liquidio_set_mcast_list,
+ .ndo_tx_timeout = liquidio_tx_timeout,
+ .ndo_change_mtu = liquidio_change_mtu,
+ .ndo_do_ioctl = liquidio_ioctl,
+ .ndo_fix_features = liquidio_fix_features,
+ .ndo_set_features = liquidio_set_features,
+};
+
+/** \brief Entry point for the liquidio module
+ */
+static int __init liquidio_init(void)
+{
+ int i;
+ struct handshake *hs;
+
+ init_completion(&first_stage);
+
+ octeon_init_device_list(conf_type);
+
+ if (liquidio_init_pci())
+ return -EINVAL;
+
+ wait_for_completion_timeout(&first_stage, msecs_to_jiffies(1000));
+
+ for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
+ hs = &handshake[i];
+ if (hs->pci_dev) {
+ wait_for_completion(&hs->init);
+ if (!hs->init_ok) {
+ /* init handshake failed */
+ dev_err(&hs->pci_dev->dev,
+ "Failed to init device\n");
+ liquidio_deinit_pci();
+ return -EIO;
+ }
+ }
+ }
+
+ for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
+ hs = &handshake[i];
+ if (hs->pci_dev) {
+ wait_for_completion_timeout(&hs->started,
+ msecs_to_jiffies(30000));
+ if (!hs->started_ok) {
+ /* starter handshake failed */
+ dev_err(&hs->pci_dev->dev,
+ "Firmware failed to start\n");
+ liquidio_deinit_pci();
+ return -EIO;
+ }
+ }
+ }
+
+ return 0;
+}
+
+int lio_nic_info(struct octeon_recv_info *recv_info, void *buf)
+{
+ struct octeon_device *oct = (struct octeon_device *)buf;
+ struct octeon_recv_pkt *recv_pkt = recv_info->recv_pkt;
+ int ifidx = 0;
+ union oct_link_status *ls;
+ int i;
+
+ if ((recv_pkt->buffer_size[0] != sizeof(*ls)) ||
+ (recv_pkt->rh.r_nic_info.ifidx > oct->ifcount)) {
+ dev_err(&oct->pci_dev->dev, "Malformed NIC_INFO, len=%d, ifidx=%d\n",
+ recv_pkt->buffer_size[0],
+ recv_pkt->rh.r_nic_info.ifidx);
+ goto nic_info_err;
+ }
+
+ ifidx = recv_pkt->rh.r_nic_info.ifidx;
+ ls = (union oct_link_status *)get_rbd(recv_pkt->buffer_ptr[0]);
+
+ octeon_swap_8B_data((u64 *)ls, (sizeof(union oct_link_status)) >> 3);
+
+ update_link_status(oct->props[ifidx].netdev, ls);
+
+nic_info_err:
+ for (i = 0; i < recv_pkt->buffer_count; i++)
+ recv_buffer_free(recv_pkt->buffer_ptr[i]);
+ octeon_free_recv_info(recv_info);
+ return 0;
+}
+
+/**
+ * \brief Setup network interfaces
+ * @param octeon_dev octeon device
+ *
+ * Called during init time for each device. It assumes the NIC
+ * is already up and running. The link information for each
+ * interface is passed in link_info.
+ */
+static int setup_nic_devices(struct octeon_device *octeon_dev)
+{
+ struct lio *lio = NULL;
+ struct net_device *netdev;
+ u8 mac[6], i, j;
+ struct octeon_soft_command *sc;
+ struct liquidio_if_cfg_context *ctx;
+ struct liquidio_if_cfg_resp *resp;
+ struct octdev_props *props;
+ int retval, num_iqueues, num_oqueues, q_no;
+ u64 q_mask;
+ int num_cpus = num_online_cpus();
+ union oct_nic_if_cfg if_cfg;
+ unsigned int base_queue;
+ unsigned int gmx_port_id;
+ u32 resp_size, ctx_size;
+
+ /* This is to handle link status changes */
+ octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC,
+ OPCODE_NIC_INFO,
+ lio_nic_info, octeon_dev);
+
+ /* REQTYPE_RESP_NET and REQTYPE_SOFT_COMMAND do not have free functions.
+ * They are handled directly.
+ */
+ octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_NORESP_NET,
+ free_netbuf);
+
+ octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_NORESP_NET_SG,
+ free_netsgbuf);
+
+ octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_RESP_NET_SG,
+ free_netsgbuf_with_resp);
+
+ for (i = 0; i < octeon_dev->ifcount; i++) {
+ resp_size = sizeof(struct liquidio_if_cfg_resp);
+ ctx_size = sizeof(struct liquidio_if_cfg_context);
+ sc = (struct octeon_soft_command *)
+ octeon_alloc_soft_command(octeon_dev, 0,
+ resp_size, ctx_size);
+ resp = (struct liquidio_if_cfg_resp *)sc->virtrptr;
+ ctx = (struct liquidio_if_cfg_context *)sc->ctxptr;
+
+ num_iqueues =
+ CFG_GET_NUM_TXQS_NIC_IF(octeon_get_conf(octeon_dev), i);
+ num_oqueues =
+ CFG_GET_NUM_RXQS_NIC_IF(octeon_get_conf(octeon_dev), i);
+ base_queue =
+ CFG_GET_BASE_QUE_NIC_IF(octeon_get_conf(octeon_dev), i);
+ gmx_port_id =
+ CFG_GET_GMXID_NIC_IF(octeon_get_conf(octeon_dev), i);
+ if (num_iqueues > num_cpus)
+ num_iqueues = num_cpus;
+ if (num_oqueues > num_cpus)
+ num_oqueues = num_cpus;
+ dev_dbg(&octeon_dev->pci_dev->dev,
+ "requesting config for interface %d, iqs %d, oqs %d\n",
+ i, num_iqueues, num_oqueues);
+ ACCESS_ONCE(ctx->cond) = 0;
+ ctx->octeon_id = lio_get_device_id(octeon_dev);
+ init_waitqueue_head(&ctx->wc);
+
+ if_cfg.u64 = 0;
+ if_cfg.s.num_iqueues = num_iqueues;
+ if_cfg.s.num_oqueues = num_oqueues;
+ if_cfg.s.base_queue = base_queue;
+ if_cfg.s.gmx_port_id = gmx_port_id;
+ octeon_prepare_soft_command(octeon_dev, sc, OPCODE_NIC,
+ OPCODE_NIC_IF_CFG, i,
+ if_cfg.u64, 0);
+
+ sc->callback = if_cfg_callback;
+ sc->callback_arg = sc;
+ sc->wait_time = 1000;
+
+ retval = octeon_send_soft_command(octeon_dev, sc);
+ if (retval) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "iq/oq config failed status: %x\n",
+ retval);
+ /* Soft instr is freed by driver in case of failure. */
+ goto setup_nic_dev_fail;
+ }
+
+ /* Sleep on a wait queue till the cond flag indicates that the
+ * response arrived or timed-out.
+ */
+ sleep_cond(&ctx->wc, &ctx->cond);
+ retval = resp->status;
+ if (retval) {
+ dev_err(&octeon_dev->pci_dev->dev, "iq/oq config failed\n");
+ goto setup_nic_dev_fail;
+ }
+
+ octeon_swap_8B_data((u64 *)(&resp->cfg_info),
+ (sizeof(struct liquidio_if_cfg_info)) >> 3);
+
+ num_iqueues = hweight64(resp->cfg_info.iqmask);
+ num_oqueues = hweight64(resp->cfg_info.oqmask);
+
+ if (!(num_iqueues) || !(num_oqueues)) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "Got bad iqueues (%016llx) or oqueues (%016llx) from firmware.\n",
+ resp->cfg_info.iqmask,
+ resp->cfg_info.oqmask);
+ goto setup_nic_dev_fail;
+ }
+ dev_dbg(&octeon_dev->pci_dev->dev,
+ "interface %d, iqmask %016llx, oqmask %016llx, numiqueues %d, numoqueues %d\n",
+ i, resp->cfg_info.iqmask, resp->cfg_info.oqmask,
+ num_iqueues, num_oqueues);
+ netdev = alloc_etherdev_mq(LIO_SIZE, num_iqueues);
+
+ if (!netdev) {
+ dev_err(&octeon_dev->pci_dev->dev, "Device allocation failed\n");
+ goto setup_nic_dev_fail;
+ }
+
+ props = &octeon_dev->props[i];
+ props->netdev = netdev;
+
+ if (num_iqueues > 1)
+ lionetdevops.ndo_select_queue = select_q;
+
+ /* Associate the routines that will handle different
+ * netdev tasks.
+ */
+ netdev->netdev_ops = &lionetdevops;
+
+ lio = GET_LIO(netdev);
+
+ memset(lio, 0, sizeof(struct lio));
+
+ lio->linfo.ifidx = resp->cfg_info.ifidx;
+ lio->ifidx = resp->cfg_info.ifidx;
+
+ lio->linfo.num_rxpciq = num_oqueues;
+ lio->linfo.num_txpciq = num_iqueues;
+ q_mask = resp->cfg_info.oqmask;
+ /* q_mask is 0-based and already verified mask is nonzero */
+ for (j = 0; j < num_oqueues; j++) {
+ q_no = __ffs64(q_mask);
+ q_mask &= (~(1UL << q_no));
+ lio->linfo.rxpciq[j] = q_no;
+ }
+ q_mask = resp->cfg_info.iqmask;
+ for (j = 0; j < num_iqueues; j++) {
+ q_no = __ffs64(q_mask);
+ q_mask &= (~(1UL << q_no));
+ lio->linfo.txpciq[j] = q_no;
+ }
+ lio->linfo.hw_addr = resp->cfg_info.linfo.hw_addr;
+ lio->linfo.gmxport = resp->cfg_info.linfo.gmxport;
+ lio->linfo.link.u64 = resp->cfg_info.linfo.link.u64;
+
+ lio->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
+
+ lio->dev_capability = NETIF_F_HIGHDMA
+ | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM
+ | NETIF_F_SG | NETIF_F_RXCSUM
+ | NETIF_F_TSO | NETIF_F_TSO6
+ | NETIF_F_LRO;
+ netif_set_gso_max_size(netdev, OCTNIC_GSO_MAX_SIZE);
+
+ netdev->features = lio->dev_capability;
+ netdev->vlan_features = lio->dev_capability;
+
+ netdev->hw_features = lio->dev_capability;
+
+ /* Point to the properties for octeon device to which this
+ * interface belongs.
+ */
+ lio->oct_dev = octeon_dev;
+ lio->octprops = props;
+ lio->netdev = netdev;
+ spin_lock_init(&lio->lock);
+
+ dev_dbg(&octeon_dev->pci_dev->dev,
+ "if%d gmx: %d hw_addr: 0x%llx\n", i,
+ lio->linfo.gmxport, CVM_CAST64(lio->linfo.hw_addr));
+
+ /* 64-bit swap required on LE machines */
+ octeon_swap_8B_data(&lio->linfo.hw_addr, 1);
+ for (j = 0; j < 6; j++)
+ mac[j] = *((u8 *)(((u8 *)&lio->linfo.hw_addr) + 2 + j));
+
+ /* Copy MAC Address to OS network device structure */
+
+ ether_addr_copy(netdev->dev_addr, mac);
+
+ if (setup_io_queues(octeon_dev, netdev)) {
+ dev_err(&octeon_dev->pci_dev->dev, "I/O queues creation failed\n");
+ goto setup_nic_dev_fail;
+ }
+
+ ifstate_set(lio, LIO_IFSTATE_DROQ_OPS);
+
+ /* By default all interfaces on a single Octeon uses the same
+ * tx and rx queues
+ */
+ lio->txq = lio->linfo.txpciq[0];
+ lio->rxq = lio->linfo.rxpciq[0];
+
+ lio->tx_qsize = octeon_get_tx_qsize(octeon_dev, lio->txq);
+ lio->rx_qsize = octeon_get_rx_qsize(octeon_dev, lio->rxq);
+
+ if (setup_glist(lio)) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "Gather list allocation failed\n");
+ goto setup_nic_dev_fail;
+ }
+
+ /* Register ethtool support */
+ liquidio_set_ethtool_ops(netdev);
+
+ liquidio_set_feature(netdev, OCTNET_CMD_LRO_ENABLE);
+
+ if ((debug != -1) && (debug & NETIF_MSG_HW))
+ liquidio_set_feature(netdev, OCTNET_CMD_VERBOSE_ENABLE);
+
+ /* Register the network device with the OS */
+ if (register_netdev(netdev)) {
+ dev_err(&octeon_dev->pci_dev->dev, "Device registration failed\n");
+ goto setup_nic_dev_fail;
+ }
+
+ dev_dbg(&octeon_dev->pci_dev->dev,
+ "Setup NIC ifidx:%d mac:%02x%02x%02x%02x%02x%02x\n",
+ i, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+ netif_carrier_off(netdev);
+
+ if (lio->linfo.link.s.status) {
+ netif_carrier_on(netdev);
+ start_txq(netdev);
+ } else {
+ netif_carrier_off(netdev);
+ }
+
+ ifstate_set(lio, LIO_IFSTATE_REGISTERED);
+
+ dev_dbg(&octeon_dev->pci_dev->dev,
+ "NIC ifidx:%d Setup successful\n", i);
+
+ octeon_free_soft_command(octeon_dev, sc);
+ }
+
+ return 0;
+
+setup_nic_dev_fail:
+
+ octeon_free_soft_command(octeon_dev, sc);
+
+ while (i--) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "NIC ifidx:%d Setup failed\n", i);
+ liquidio_destroy_nic_device(octeon_dev, i);
+ }
+ return -ENODEV;
+}
+
+/**
+ * \brief initialize the NIC
+ * @param oct octeon device
+ *
+ * This initialization routine is called once the Octeon device application is
+ * up and running
+ */
+static int liquidio_init_nic_module(struct octeon_device *oct)
+{
+ struct oct_intrmod_cfg *intrmod_cfg;
+ int retval = 0;
+ int num_nic_ports = CFG_GET_NUM_NIC_PORTS(octeon_get_conf(oct));
+
+ dev_dbg(&oct->pci_dev->dev, "Initializing network interfaces\n");
+
+ /* only default iq and oq were initialized
+ * initialize the rest as well
+ */
+ /* run port_config command for each port */
+ oct->ifcount = num_nic_ports;
+
+ memset(oct->props, 0,
+ sizeof(struct octdev_props) * num_nic_ports);
+
+ retval = setup_nic_devices(oct);
+ if (retval) {
+ dev_err(&oct->pci_dev->dev, "Setup NIC devices failed\n");
+ goto octnet_init_failure;
+ }
+
+ liquidio_ptp_init(oct);
+
+ /* Initialize interrupt moderation params */
+ intrmod_cfg = &((struct octeon_device *)oct)->intrmod;
+ intrmod_cfg->intrmod_enable = 1;
+ intrmod_cfg->intrmod_check_intrvl = LIO_INTRMOD_CHECK_INTERVAL;
+ intrmod_cfg->intrmod_maxpkt_ratethr = LIO_INTRMOD_MAXPKT_RATETHR;
+ intrmod_cfg->intrmod_minpkt_ratethr = LIO_INTRMOD_MINPKT_RATETHR;
+ intrmod_cfg->intrmod_maxcnt_trigger = LIO_INTRMOD_MAXCNT_TRIGGER;
+ intrmod_cfg->intrmod_maxtmr_trigger = LIO_INTRMOD_MAXTMR_TRIGGER;
+ intrmod_cfg->intrmod_mintmr_trigger = LIO_INTRMOD_MINTMR_TRIGGER;
+ intrmod_cfg->intrmod_mincnt_trigger = LIO_INTRMOD_MINCNT_TRIGGER;
+
+ dev_dbg(&oct->pci_dev->dev, "Network interfaces ready\n");
+
+ return retval;
+
+octnet_init_failure:
+
+ oct->ifcount = 0;
+
+ return retval;
+}
+
+/**
+ * \brief starter callback that invokes the remaining initialization work after
+ * the NIC is up and running.
+ * @param octptr work struct work_struct
+ */
+static void nic_starter(struct work_struct *work)
+{
+ struct octeon_device *oct;
+ struct cavium_wk *wk = (struct cavium_wk *)work;
+
+ oct = (struct octeon_device *)wk->ctxptr;
+
+ if (atomic_read(&oct->status) == OCT_DEV_RUNNING)
+ return;
+
+ /* If the status of the device is CORE_OK, the core
+ * application has reported its application type. Call
+ * any registered handlers now and move to the RUNNING
+ * state.
+ */
+ if (atomic_read(&oct->status) != OCT_DEV_CORE_OK) {
+ schedule_delayed_work(&oct->nic_poll_work.work,
+ LIQUIDIO_STARTER_POLL_INTERVAL_MS);
+ return;
+ }
+
+ atomic_set(&oct->status, OCT_DEV_RUNNING);
+
+ if (oct->app_mode && oct->app_mode == CVM_DRV_NIC_APP) {
+ dev_dbg(&oct->pci_dev->dev, "Starting NIC module\n");
+
+ if (liquidio_init_nic_module(oct))
+ dev_err(&oct->pci_dev->dev, "NIC initialization failed\n");
+ else
+ handshake[oct->octeon_id].started_ok = 1;
+ } else {
+ dev_err(&oct->pci_dev->dev,
+ "Unexpected application running on NIC (%d). Check firmware.\n",
+ oct->app_mode);
+ }
+
+ complete(&handshake[oct->octeon_id].started);
+}
+
+/**
+ * \brief Device initialization for each Octeon device that is probed
+ * @param octeon_dev octeon device
+ */
+static int octeon_device_init(struct octeon_device *octeon_dev)
+{
+ int j, ret;
+ struct octeon_device_priv *oct_priv =
+ (struct octeon_device_priv *)octeon_dev->priv;
+ atomic_set(&octeon_dev->status, OCT_DEV_BEGIN_STATE);
+
+ /* Enable access to the octeon device and make its DMA capability
+ * known to the OS.
+ */
+ if (octeon_pci_os_setup(octeon_dev))
+ return 1;
+
+ /* Identify the Octeon type and map the BAR address space. */
+ if (octeon_chip_specific_setup(octeon_dev)) {
+ dev_err(&octeon_dev->pci_dev->dev, "Chip specific setup failed\n");
+ return 1;
+ }
+
+ atomic_set(&octeon_dev->status, OCT_DEV_PCI_MAP_DONE);
+
+ octeon_dev->app_mode = CVM_DRV_INVALID_APP;
+
+ /* Do a soft reset of the Octeon device. */
+ if (octeon_dev->fn_list.soft_reset(octeon_dev))
+ return 1;
+
+ /* Initialize the dispatch mechanism used to push packets arriving on
+ * Octeon Output queues.
+ */
+ if (octeon_init_dispatch_list(octeon_dev))
+ return 1;
+
+ octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC,
+ OPCODE_NIC_CORE_DRV_ACTIVE,
+ octeon_core_drv_init,
+ octeon_dev);
+
+ INIT_DELAYED_WORK(&octeon_dev->nic_poll_work.work, nic_starter);
+ octeon_dev->nic_poll_work.ctxptr = (void *)octeon_dev;
+ schedule_delayed_work(&octeon_dev->nic_poll_work.work,
+ LIQUIDIO_STARTER_POLL_INTERVAL_MS);
+
+ atomic_set(&octeon_dev->status, OCT_DEV_DISPATCH_INIT_DONE);
+
+ octeon_set_io_queues_off(octeon_dev);
+
+ /* Setup the data structures that manage this Octeon's Input queues. */
+ if (octeon_setup_instr_queues(octeon_dev)) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "instruction queue initialization failed\n");
+ /* On error, release any previously allocated queues */
+ for (j = 0; j < octeon_dev->num_iqs; j++)
+ octeon_delete_instr_queue(octeon_dev, j);
+ return 1;
+ }
+ atomic_set(&octeon_dev->status, OCT_DEV_INSTR_QUEUE_INIT_DONE);
+
+ /* Initialize soft command buffer pool
+ */
+ if (octeon_setup_sc_buffer_pool(octeon_dev)) {
+ dev_err(&octeon_dev->pci_dev->dev, "sc buffer pool allocation failed\n");
+ return 1;
+ }
+ atomic_set(&octeon_dev->status, OCT_DEV_SC_BUFF_POOL_INIT_DONE);
+
+ /* Initialize lists to manage the requests of different types that
+ * arrive from user & kernel applications for this octeon device.
+ */
+ if (octeon_setup_response_list(octeon_dev)) {
+ dev_err(&octeon_dev->pci_dev->dev, "Response list allocation failed\n");
+ return 1;
+ }
+ atomic_set(&octeon_dev->status, OCT_DEV_RESP_LIST_INIT_DONE);
+
+ if (octeon_setup_output_queues(octeon_dev)) {
+ dev_err(&octeon_dev->pci_dev->dev, "Output queue initialization failed\n");
+ /* Release any previously allocated queues */
+ for (j = 0; j < octeon_dev->num_oqs; j++)
+ octeon_delete_droq(octeon_dev, j);
+ }
+
+ atomic_set(&octeon_dev->status, OCT_DEV_DROQ_INIT_DONE);
+
+ /* The input and output queue registers were setup earlier (the queues
+ * were not enabled). Any additional registers that need to be
+ * programmed should be done now.
+ */
+ ret = octeon_dev->fn_list.setup_device_regs(octeon_dev);
+ if (ret) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "Failed to configure device registers\n");
+ return ret;
+ }
+
+ /* Initialize the tasklet that handles output queue packet processing.*/
+ dev_dbg(&octeon_dev->pci_dev->dev, "Initializing droq tasklet\n");
+ tasklet_init(&oct_priv->droq_tasklet, octeon_droq_bh,
+ (unsigned long)octeon_dev);
+
+ /* Setup the interrupt handler and record the INT SUM register address
+ */
+ octeon_setup_interrupt(octeon_dev);
+
+ /* Enable Octeon device interrupts */
+ octeon_dev->fn_list.enable_interrupt(octeon_dev->chip);
+
+ /* Enable the input and output queues for this Octeon device */
+ octeon_dev->fn_list.enable_io_queues(octeon_dev);
+
+ atomic_set(&octeon_dev->status, OCT_DEV_IO_QUEUES_DONE);
+
+ dev_dbg(&octeon_dev->pci_dev->dev, "Waiting for DDR initialization...\n");
+
+ if (ddr_timeout == 0) {
+ dev_info(&octeon_dev->pci_dev->dev,
+ "WAITING. Set ddr_timeout to non-zero value to proceed with initialization.\n");
+ }
+
+ schedule_timeout_uninterruptible(HZ * LIO_RESET_SECS);
+
+ /* Wait for the octeon to initialize DDR after the soft-reset. */
+ ret = octeon_wait_for_ddr_init(octeon_dev, &ddr_timeout);
+ if (ret) {
+ dev_err(&octeon_dev->pci_dev->dev,
+ "DDR not initialized. Please confirm that board is configured to boot from Flash, ret: %d\n",
+ ret);
+ return 1;
+ }
+
+ if (octeon_wait_for_bootloader(octeon_dev, 1000) != 0) {
+ dev_err(&octeon_dev->pci_dev->dev, "Board not responding\n");
+ return 1;
+ }
+
+ dev_dbg(&octeon_dev->pci_dev->dev, "Initializing consoles\n");
+ ret = octeon_init_consoles(octeon_dev);
+ if (ret) {
+ dev_err(&octeon_dev->pci_dev->dev, "Could not access board consoles\n");
+ return 1;
+ }
+ ret = octeon_add_console(octeon_dev, 0);
+ if (ret) {
+ dev_err(&octeon_dev->pci_dev->dev, "Could not access board console\n");
+ return 1;
+ }
+
+ atomic_set(&octeon_dev->status, OCT_DEV_CONSOLE_INIT_DONE);
+
+ dev_dbg(&octeon_dev->pci_dev->dev, "Loading firmware\n");
+ ret = load_firmware(octeon_dev);
+ if (ret) {
+ dev_err(&octeon_dev->pci_dev->dev, "Could not load firmware to board\n");
+ return 1;
+ }
+
+ handshake[octeon_dev->octeon_id].init_ok = 1;
+ complete(&handshake[octeon_dev->octeon_id].init);
+
+ atomic_set(&octeon_dev->status, OCT_DEV_HOST_OK);
+
+ /* Send Credit for Octeon Output queues. Credits are always sent after
+ * the output queue is enabled.
+ */
+ for (j = 0; j < octeon_dev->num_oqs; j++)
+ writel(octeon_dev->droq[j]->max_count,
+ octeon_dev->droq[j]->pkts_credit_reg);
+
+ /* Packets can start arriving on the output queues from this point. */
+
+ return 0;
+}
+
+/**
+ * \brief Exits the module
+ */
+static void __exit liquidio_exit(void)
+{
+ liquidio_deinit_pci();
+
+ pr_info("LiquidIO network module is now unloaded\n");
+}
+
+module_init(liquidio_init);
+module_exit(liquidio_exit);
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file liquidio_common.h
+ * \brief Common: Structures and macros used in PCI-NIC package by core and
+ * host driver.
+ */
+
+#ifndef __LIQUIDIO_COMMON_H__
+#define __LIQUIDIO_COMMON_H__
+
+#include "octeon_config.h"
+
+#define LIQUIDIO_VERSION "1.1.9"
+#define LIQUIDIO_MAJOR_VERSION 1
+#define LIQUIDIO_MINOR_VERSION 1
+#define LIQUIDIO_MICRO_VERSION 9
+
+#define CONTROL_IQ 0
+/** Tag types used by Octeon cores in its work. */
+enum octeon_tag_type {
+ ORDERED_TAG = 0,
+ ATOMIC_TAG = 1,
+ NULL_TAG = 2,
+ NULL_NULL_TAG = 3
+};
+
+/* pre-defined host->NIC tag values */
+#define LIO_CONTROL (0x11111110)
+#define LIO_DATA(i) (0x11111111 + (i))
+
+/* Opcodes used by host driver/apps to perform operations on the core.
+ * These are used to identify the major subsystem that the operation
+ * is for.
+ */
+#define OPCODE_CORE 0 /* used for generic core operations */
+#define OPCODE_NIC 1 /* used for NIC operations */
+#define OPCODE_LAST OPCODE_NIC
+
+/* Subcodes are used by host driver/apps to identify the sub-operation
+ * for the core. They only need to by unique for a given subsystem.
+ */
+#define OPCODE_SUBCODE(op, sub) (((op & 0x0f) << 8) | ((sub) & 0x7f))
+
+/** OPCODE_CORE subcodes. For future use. */
+
+/** OPCODE_NIC subcodes */
+
+/* This subcode is sent by core PCI driver to indicate cores are ready. */
+#define OPCODE_NIC_CORE_DRV_ACTIVE 0x01
+#define OPCODE_NIC_NW_DATA 0x02 /* network packet data */
+#define OPCODE_NIC_CMD 0x03
+#define OPCODE_NIC_INFO 0x04
+#define OPCODE_NIC_PORT_STATS 0x05
+#define OPCODE_NIC_MDIO45 0x06
+#define OPCODE_NIC_TIMESTAMP 0x07
+#define OPCODE_NIC_INTRMOD_CFG 0x08
+#define OPCODE_NIC_IF_CFG 0x09
+
+#define CORE_DRV_TEST_SCATTER_OP 0xFFF5
+
+#define OPCODE_SLOW_PATH(rh) \
+ (OPCODE_SUBCODE(rh->r.opcode, rh->r.subcode) != \
+ OPCODE_SUBCODE(OPCODE_NIC, OPCODE_NIC_NW_DATA))
+
+/* Application codes advertised by the core driver initialization packet. */
+#define CVM_DRV_APP_START 0x0
+#define CVM_DRV_NO_APP 0
+#define CVM_DRV_APP_COUNT 0x2
+#define CVM_DRV_BASE_APP (CVM_DRV_APP_START + 0x0)
+#define CVM_DRV_NIC_APP (CVM_DRV_APP_START + 0x1)
+#define CVM_DRV_INVALID_APP (CVM_DRV_APP_START + 0x2)
+#define CVM_DRV_APP_END (CVM_DRV_INVALID_APP - 1)
+
+/* Macro to increment index.
+ * Index is incremented by count; if the sum exceeds
+ * max, index is wrapped-around to the start.
+ */
+#define INCR_INDEX(index, count, max) \
+do { \
+ if (((index) + (count)) >= (max)) \
+ index = ((index) + (count)) - (max); \
+ else \
+ index += (count); \
+} while (0)
+
+#define INCR_INDEX_BY1(index, max) \
+do { \
+ if ((++(index)) == (max)) \
+ index = 0; \
+} while (0)
+
+#define DECR_INDEX(index, count, max) \
+do { \
+ if ((count) > (index)) \
+ index = ((max) - ((count - index))); \
+ else \
+ index -= count; \
+} while (0)
+
+#define OCT_BOARD_NAME 32
+#define OCT_SERIAL_LEN 64
+
+/* Structure used by core driver to send indication that the Octeon
+ * application is ready.
+ */
+struct octeon_core_setup {
+ u64 corefreq;
+
+ char boardname[OCT_BOARD_NAME];
+
+ char board_serial_number[OCT_SERIAL_LEN];
+
+ u64 board_rev_major;
+
+ u64 board_rev_minor;
+
+};
+
+/*--------------------------- SCATTER GATHER ENTRY -----------------------*/
+
+/* The Scatter-Gather List Entry. The scatter or gather component used with
+ * a Octeon input instruction has this format.
+ */
+struct octeon_sg_entry {
+ /** The first 64 bit gives the size of data in each dptr.*/
+ union {
+ u16 size[4];
+ u64 size64;
+ } u;
+
+ /** The 4 dptr pointers for this entry. */
+ u64 ptr[4];
+
+};
+
+#define OCT_SG_ENTRY_SIZE (sizeof(struct octeon_sg_entry))
+
+/* \brief Add size to gather list
+ * @param sg_entry scatter/gather entry
+ * @param size size to add
+ * @param pos position to add it.
+ */
+static inline void add_sg_size(struct octeon_sg_entry *sg_entry,
+ u16 size,
+ u32 pos)
+{
+#ifdef __BIG_ENDIAN_BITFIELD
+ sg_entry->u.size[pos] = size;
+#else
+ sg_entry->u.size[3 - pos] = size;
+#endif
+}
+
+/*------------------------- End Scatter/Gather ---------------------------*/
+
+#define OCTNET_FRM_PTP_HEADER_SIZE 8
+#define OCTNET_FRM_HEADER_SIZE 30 /* PTP timestamp + VLAN + Ethernet */
+
+#define OCTNET_MIN_FRM_SIZE (64 + OCTNET_FRM_PTP_HEADER_SIZE)
+#define OCTNET_MAX_FRM_SIZE (16000 + OCTNET_FRM_HEADER_SIZE)
+
+#define OCTNET_DEFAULT_FRM_SIZE (1500 + OCTNET_FRM_HEADER_SIZE)
+
+/** NIC Commands are sent using this Octeon Input Queue */
+#define OCTNET_CMD_Q 0
+
+/* NIC Command types */
+#define OCTNET_CMD_CHANGE_MTU 0x1
+#define OCTNET_CMD_CHANGE_MACADDR 0x2
+#define OCTNET_CMD_CHANGE_DEVFLAGS 0x3
+#define OCTNET_CMD_RX_CTL 0x4
+
+#define OCTNET_CMD_SET_MULTI_LIST 0x5
+#define OCTNET_CMD_CLEAR_STATS 0x6
+
+/* command for setting the speed, duplex & autoneg */
+#define OCTNET_CMD_SET_SETTINGS 0x7
+#define OCTNET_CMD_SET_FLOW_CTL 0x8
+
+#define OCTNET_CMD_MDIO_READ_WRITE 0x9
+#define OCTNET_CMD_GPIO_ACCESS 0xA
+#define OCTNET_CMD_LRO_ENABLE 0xB
+#define OCTNET_CMD_LRO_DISABLE 0xC
+#define OCTNET_CMD_SET_RSS 0xD
+#define OCTNET_CMD_WRITE_SA 0xE
+#define OCTNET_CMD_DELETE_SA 0xF
+#define OCTNET_CMD_UPDATE_SA 0x12
+
+#define OCTNET_CMD_TNL_RX_CSUM_CTL 0x10
+#define OCTNET_CMD_TNL_TX_CSUM_CTL 0x11
+#define OCTNET_CMD_IPSECV2_AH_ESP_CTL 0x13
+#define OCTNET_CMD_VERBOSE_ENABLE 0x14
+#define OCTNET_CMD_VERBOSE_DISABLE 0x15
+
+/* RX(packets coming from wire) Checksum verification flags */
+/* TCP/UDP csum */
+#define CNNIC_L4SUM_VERIFIED 0x1
+#define CNNIC_IPSUM_VERIFIED 0x2
+#define CNNIC_TUN_CSUM_VERIFIED 0x4
+#define CNNIC_CSUM_VERIFIED (CNNIC_IPSUM_VERIFIED | CNNIC_L4SUM_VERIFIED)
+
+/*LROIPV4 and LROIPV6 Flags*/
+#define OCTNIC_LROIPV4 0x1
+#define OCTNIC_LROIPV6 0x2
+
+/* Interface flags communicated between host driver and core app. */
+enum octnet_ifflags {
+ OCTNET_IFFLAG_PROMISC = 0x01,
+ OCTNET_IFFLAG_ALLMULTI = 0x02,
+ OCTNET_IFFLAG_MULTICAST = 0x04,
+ OCTNET_IFFLAG_BROADCAST = 0x08,
+ OCTNET_IFFLAG_UNICAST = 0x10
+};
+
+/* wqe
+ * --------------- 0
+ * | wqe word0-3 |
+ * --------------- 32
+ * | PCI IH |
+ * --------------- 40
+ * | RPTR |
+ * --------------- 48
+ * | PCI IRH |
+ * --------------- 56
+ * | OCT_NET_CMD |
+ * --------------- 64
+ * | Addtl 8-BData |
+ * | |
+ * ---------------
+ */
+
+union octnet_cmd {
+ u64 u64;
+
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 cmd:5;
+
+ u64 more:6; /* How many udd words follow the command */
+
+ u64 param1:29;
+
+ u64 param2:16;
+
+ u64 param3:8;
+
+#else
+
+ u64 param3:8;
+
+ u64 param2:16;
+
+ u64 param1:29;
+
+ u64 more:6;
+
+ u64 cmd:5;
+
+#endif
+ } s;
+
+};
+
+#define OCTNET_CMD_SIZE (sizeof(union octnet_cmd))
+
+/** Instruction Header */
+struct octeon_instr_ih {
+#ifdef __BIG_ENDIAN_BITFIELD
+ /** Raw mode indicator 1 = RAW */
+ u64 raw:1;
+
+ /** Gather indicator 1=gather*/
+ u64 gather:1;
+
+ /** Data length OR no. of entries in gather list */
+ u64 dlengsz:14;
+
+ /** Front Data size */
+ u64 fsz:6;
+
+ /** Packet Order / Work Unit selection (1 of 8)*/
+ u64 qos:3;
+
+ /** Core group selection (1 of 16) */
+ u64 grp:4;
+
+ /** Short Raw Packet Indicator 1=short raw pkt */
+ u64 rs:1;
+
+ /** Tag type */
+ u64 tagtype:2;
+
+ /** Tag Value */
+ u64 tag:32;
+#else
+ /** Tag Value */
+ u64 tag:32;
+
+ /** Tag type */
+ u64 tagtype:2;
+
+ /** Short Raw Packet Indicator 1=short raw pkt */
+ u64 rs:1;
+
+ /** Core group selection (1 of 16) */
+ u64 grp:4;
+
+ /** Packet Order / Work Unit selection (1 of 8)*/
+ u64 qos:3;
+
+ /** Front Data size */
+ u64 fsz:6;
+
+ /** Data length OR no. of entries in gather list */
+ u64 dlengsz:14;
+
+ /** Gather indicator 1=gather*/
+ u64 gather:1;
+
+ /** Raw mode indicator 1 = RAW */
+ u64 raw:1;
+#endif
+};
+
+/** Input Request Header */
+struct octeon_instr_irh {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 opcode:4;
+ u64 rflag:1;
+ u64 subcode:7;
+ u64 len:3;
+ u64 rid:13;
+ u64 reserved:4;
+ u64 ossp:32; /* opcode/subcode specific parameters */
+#else
+ u64 ossp:32; /* opcode/subcode specific parameters */
+ u64 reserved:4;
+ u64 rid:13;
+ u64 len:3;
+ u64 subcode:7;
+ u64 rflag:1;
+ u64 opcode:4;
+#endif
+};
+
+/** Return Data Parameters */
+struct octeon_instr_rdp {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 reserved:49;
+ u64 pcie_port:3;
+ u64 rlen:12;
+#else
+ u64 rlen:12;
+ u64 pcie_port:3;
+ u64 reserved:49;
+#endif
+};
+
+/** Receive Header */
+union octeon_rh {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 u64;
+ struct {
+ u64 opcode:4;
+ u64 subcode:8;
+ u64 len:3; /** additional 64-bit words */
+ u64 rid:13; /** request id in response to pkt sent by host */
+ u64 reserved:4;
+ u64 ossp:32; /** opcode/subcode specific parameters */
+ } r;
+ struct {
+ u64 opcode:4;
+ u64 subcode:8;
+ u64 len:3; /** additional 64-bit words */
+ u64 rid:13; /** request id in response to pkt sent by host */
+ u64 extra:24;
+ u64 link:8;
+ u64 csum_verified:3; /** checksum verified. */
+ u64 has_hwtstamp:1; /** Has hardware timestamp. 1 = yes. */
+ } r_dh;
+ struct {
+ u64 opcode:4;
+ u64 subcode:8;
+ u64 len:3; /** additional 64-bit words */
+ u64 rid:13; /** request id in response to pkt sent by host */
+ u64 num_gmx_ports:8;
+ u64 max_nic_ports:8;
+ u64 app_cap_flags:4;
+ u64 app_mode:16;
+ } r_core_drv_init;
+ struct {
+ u64 opcode:4;
+ u64 subcode:8;
+ u64 len:3; /** additional 64-bit words */
+ u64 rid:13;
+ u64 reserved:4;
+ u64 extra:25;
+ u64 ifidx:7;
+ } r_nic_info;
+#else
+ u64 u64;
+ struct {
+ u64 ossp:32; /** opcode/subcode specific parameters */
+ u64 reserved:4;
+ u64 rid:13; /** req id in response to pkt sent by host */
+ u64 len:3; /** additional 64-bit words */
+ u64 subcode:8;
+ u64 opcode:4;
+ } r;
+ struct {
+ u64 has_hwtstamp:1; /** 1 = has hwtstamp */
+ u64 csum_verified:3; /** checksum verified. */
+ u64 link:8;
+ u64 extra:24;
+ u64 rid:13; /** req id in response to pkt sent by host */
+ u64 len:3; /** additional 64-bit words */
+ u64 subcode:8;
+ u64 opcode:4;
+ } r_dh;
+ struct {
+ u64 app_mode:16;
+ u64 app_cap_flags:4;
+ u64 max_nic_ports:8;
+ u64 num_gmx_ports:8;
+ u64 rid:13;
+ u64 len:3; /** additional 64-bit words */
+ u64 subcode:8;
+ u64 opcode:4;
+ } r_core_drv_init;
+ struct {
+ u64 ifidx:7;
+ u64 extra:25;
+ u64 reserved:4;
+ u64 rid:13;
+ u64 len:3; /** additional 64-bit words */
+ u64 subcode:8;
+ u64 opcode:4;
+ } r_nic_info;
+#endif
+};
+
+#define OCT_RH_SIZE (sizeof(union octeon_rh))
+
+#define OCT_PKT_PARAM_IPV4OPTS 1
+#define OCT_PKT_PARAM_IPV6EXTHDR 2
+
+union octnic_packet_params {
+ u32 u32;
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u32 reserved:6;
+ u32 tnl_csum:1;
+ u32 ip_csum:1;
+ u32 ipv4opts_ipv6exthdr:2;
+ u32 ipsec_ops:4;
+ u32 tsflag:1;
+ u32 csoffset:9;
+ u32 ifidx:8;
+#else
+ u32 ifidx:8;
+ u32 csoffset:9;
+ u32 tsflag:1;
+ u32 ipsec_ops:4;
+ u32 ipv4opts_ipv6exthdr:2;
+ u32 ip_csum:1;
+ u32 tnl_csum:1;
+ u32 reserved:6;
+#endif
+ } s;
+};
+
+/** Status of a RGMII Link on Octeon as seen by core driver. */
+union oct_link_status {
+ u64 u64;
+
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 duplex:8;
+ u64 status:8;
+ u64 mtu:16;
+ u64 speed:16;
+ u64 autoneg:1;
+ u64 interface:4;
+ u64 pause:1;
+ u64 reserved:10;
+#else
+ u64 reserved:10;
+ u64 pause:1;
+ u64 interface:4;
+ u64 autoneg:1;
+ u64 speed:16;
+ u64 mtu:16;
+ u64 status:8;
+ u64 duplex:8;
+#endif
+ } s;
+};
+
+/** Information for a OCTEON ethernet interface shared between core & host. */
+struct oct_link_info {
+ union oct_link_status link;
+ u64 hw_addr;
+
+#ifdef __BIG_ENDIAN_BITFIELD
+ u16 gmxport;
+ u8 rsvd[3];
+ u8 num_txpciq;
+ u8 num_rxpciq;
+ u8 ifidx;
+#else
+ u8 ifidx;
+ u8 num_rxpciq;
+ u8 num_txpciq;
+ u8 rsvd[3];
+ u16 gmxport;
+#endif
+
+ u8 txpciq[MAX_IOQS_PER_NICIF];
+ u8 rxpciq[MAX_IOQS_PER_NICIF];
+};
+
+#define OCT_LINK_INFO_SIZE (sizeof(struct oct_link_info))
+
+struct liquidio_if_cfg_info {
+ u64 ifidx;
+ u64 iqmask; /** mask for IQs enabled for the port */
+ u64 oqmask; /** mask for OQs enabled for the port */
+ struct oct_link_info linfo; /** initial link information */
+};
+
+/** Stats for each NIC port in RX direction. */
+struct nic_rx_stats {
+ /* link-level stats */
+ u64 total_rcvd;
+ u64 bytes_rcvd;
+ u64 total_bcst;
+ u64 total_mcst;
+ u64 runts;
+ u64 ctl_rcvd;
+ u64 fifo_err; /* Accounts for over/under-run of buffers */
+ u64 dmac_drop;
+ u64 fcs_err;
+ u64 jabber_err;
+ u64 l2_err;
+ u64 frame_err;
+
+ /* firmware stats */
+ u64 fw_total_rcvd;
+ u64 fw_total_fwd;
+ u64 fw_err_pko;
+ u64 fw_err_link;
+ u64 fw_err_drop;
+ u64 fw_lro_pkts; /* Number of packets that are LROed */
+ u64 fw_lro_octs; /* Number of octets that are LROed */
+ u64 fw_total_lro; /* Number of LRO packets formed */
+ u64 fw_lro_aborts; /* Number of times lRO of packet aborted */
+ /* intrmod: packet forward rate */
+ u64 fwd_rate;
+};
+
+/** Stats for each NIC port in RX direction. */
+struct nic_tx_stats {
+ /* link-level stats */
+ u64 total_pkts_sent;
+ u64 total_bytes_sent;
+ u64 mcast_pkts_sent;
+ u64 bcast_pkts_sent;
+ u64 ctl_sent;
+ u64 one_collision_sent; /* Packets sent after one collision*/
+ u64 multi_collision_sent; /* Packets sent after multiple collision*/
+ u64 max_collision_fail; /* Packets not sent due to max collisions */
+ u64 max_deferral_fail; /* Packets not sent due to max deferrals */
+ u64 fifo_err; /* Accounts for over/under-run of buffers */
+ u64 runts;
+ u64 total_collisions; /* Total number of collisions detected */
+
+ /* firmware stats */
+ u64 fw_total_sent;
+ u64 fw_total_fwd;
+ u64 fw_err_pko;
+ u64 fw_err_link;
+ u64 fw_err_drop;
+};
+
+struct oct_link_stats {
+ struct nic_rx_stats fromwire;
+ struct nic_tx_stats fromhost;
+
+};
+
+#define LIO68XX_LED_CTRL_ADDR 0x3501
+#define LIO68XX_LED_CTRL_CFGON 0x1f
+#define LIO68XX_LED_CTRL_CFGOFF 0x100
+#define LIO68XX_LED_BEACON_ADDR 0x3508
+#define LIO68XX_LED_BEACON_CFGON 0x47fd
+#define LIO68XX_LED_BEACON_CFGOFF 0x11fc
+#define VITESSE_PHY_GPIO_DRIVEON 0x1
+#define VITESSE_PHY_GPIO_CFG 0x8
+#define VITESSE_PHY_GPIO_DRIVEOFF 0x4
+#define VITESSE_PHY_GPIO_HIGH 0x2
+#define VITESSE_PHY_GPIO_LOW 0x3
+
+struct oct_mdio_cmd {
+ u64 op;
+ u64 mdio_addr;
+ u64 value1;
+ u64 value2;
+ u64 value3;
+};
+
+#define OCT_LINK_STATS_SIZE (sizeof(struct oct_link_stats))
+
+#define LIO_INTRMOD_CHECK_INTERVAL 1
+#define LIO_INTRMOD_MAXPKT_RATETHR 196608 /* max pkt rate threshold */
+#define LIO_INTRMOD_MINPKT_RATETHR 9216 /* min pkt rate threshold */
+#define LIO_INTRMOD_MAXCNT_TRIGGER 384 /* max pkts to trigger interrupt */
+#define LIO_INTRMOD_MINCNT_TRIGGER 1 /* min pkts to trigger interrupt */
+#define LIO_INTRMOD_MAXTMR_TRIGGER 128 /* max time to trigger interrupt */
+#define LIO_INTRMOD_MINTMR_TRIGGER 32 /* min time to trigger interrupt */
+
+struct oct_intrmod_cfg {
+ u64 intrmod_enable;
+ u64 intrmod_check_intrvl;
+ u64 intrmod_maxpkt_ratethr;
+ u64 intrmod_minpkt_ratethr;
+ u64 intrmod_maxcnt_trigger;
+ u64 intrmod_maxtmr_trigger;
+ u64 intrmod_mincnt_trigger;
+ u64 intrmod_mintmr_trigger;
+};
+
+#define BASE_QUEUE_NOT_REQUESTED 65535
+
+union oct_nic_if_cfg {
+ u64 u64;
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 base_queue:16;
+ u64 num_iqueues:16;
+ u64 num_oqueues:16;
+ u64 gmx_port_id:8;
+ u64 reserved:8;
+#else
+ u64 reserved:8;
+ u64 gmx_port_id:8;
+ u64 num_oqueues:16;
+ u64 num_iqueues:16;
+ u64 base_queue:16;
+#endif
+ } s;
+};
+
+#endif
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#ifndef _LIQUIDIO_IMAGE_H_
+#define _LIQUIDIO_IMAGE_H_
+
+#define LIO_MAX_FW_TYPE_LEN (8)
+#define LIO_MAX_FW_FILENAME_LEN (256)
+#define LIO_FW_DIR "liquidio/"
+#define LIO_FW_BASE_NAME "lio_"
+#define LIO_FW_NAME_SUFFIX ".bin"
+#define LIO_FW_NAME_TYPE_NIC "nic"
+#define LIO_FW_NAME_TYPE_NONE "none"
+#define LIO_MAX_FIRMWARE_VERSION_LEN 16
+
+#define LIO_MAX_BOOTCMD_LEN 1024
+#define LIO_MAX_IMAGES 16
+#define LIO_NIC_MAGIC 0x434E4943 /* "CNIC" */
+struct octeon_firmware_desc {
+ u64 addr;
+ u32 len;
+ u32 crc32; /* crc32 of image */
+};
+
+/* Following the header is a list of 64-bit aligned binary images,
+ * as described by the desc field.
+ * Numeric fields are in network byte order.
+ */
+struct octeon_firmware_file_header {
+ u32 magic;
+ char version[LIO_MAX_FIRMWARE_VERSION_LEN];
+ char bootcmd[LIO_MAX_BOOTCMD_LEN];
+ u32 num_images;
+ struct octeon_firmware_desc desc[LIO_MAX_IMAGES];
+ u32 pad;
+ u32 crc32; /* header checksum */
+};
+
+#endif /* _LIQUIDIO_IMAGE_H_ */
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file octeon_config.h
+ * \brief Host Driver: Configuration data structures for the host driver.
+ */
+
+#ifndef __OCTEON_CONFIG_H__
+#define __OCTEON_CONFIG_H__
+
+/*--------------------------CONFIG VALUES------------------------*/
+
+/* The following macros affect the way the driver data structures
+ * are generated for Octeon devices.
+ * They can be modified.
+ */
+
+/* Maximum octeon devices defined as MAX_OCTEON_NICIF to support
+ * multiple(<= MAX_OCTEON_NICIF) Miniports
+ */
+#define MAX_OCTEON_NICIF 32
+#define MAX_OCTEON_DEVICES MAX_OCTEON_NICIF
+#define MAX_OCTEON_LINKS MAX_OCTEON_NICIF
+#define MAX_OCTEON_MULTICAST_ADDR 32
+
+/* CN6xxx IQ configuration macros */
+#define CN6XXX_MAX_INPUT_QUEUES 32
+#define CN6XXX_MAX_IQ_DESCRIPTORS 2048
+#define CN6XXX_DB_MIN 1
+#define CN6XXX_DB_MAX 8
+#define CN6XXX_DB_TIMEOUT 1
+
+/* CN6xxx OQ configuration macros */
+#define CN6XXX_MAX_OUTPUT_QUEUES 32
+#define CN6XXX_MAX_OQ_DESCRIPTORS 2048
+#define CN6XXX_OQ_BUF_SIZE 1536
+#define CN6XXX_OQ_PKTSPER_INTR ((CN6XXX_MAX_OQ_DESCRIPTORS < 512) ? \
+ (CN6XXX_MAX_OQ_DESCRIPTORS / 4) : 128)
+#define CN6XXX_OQ_REFIL_THRESHOLD ((CN6XXX_MAX_OQ_DESCRIPTORS < 512) ? \
+ (CN6XXX_MAX_OQ_DESCRIPTORS / 4) : 128)
+
+#define CN6XXX_OQ_INTR_PKT 64
+#define CN6XXX_OQ_INTR_TIME 100
+#define DEFAULT_NUM_NIC_PORTS_66XX 2
+#define DEFAULT_NUM_NIC_PORTS_68XX 4
+#define DEFAULT_NUM_NIC_PORTS_68XX_210NV 2
+
+/* common OCTEON configuration macros */
+#define CN6XXX_CFG_IO_QUEUES 32
+#define OCTEON_32BYTE_INSTR 32
+#define OCTEON_64BYTE_INSTR 64
+#define OCTEON_MAX_BASE_IOQ 4
+#define OCTEON_OQ_BUFPTR_MODE 0
+#define OCTEON_OQ_INFOPTR_MODE 1
+
+#define OCTEON_DMA_INTR_PKT 64
+#define OCTEON_DMA_INTR_TIME 1000
+
+#define MAX_TXQS_PER_INTF 8
+#define MAX_RXQS_PER_INTF 8
+#define DEF_TXQS_PER_INTF 4
+#define DEF_RXQS_PER_INTF 4
+
+#define INVALID_IOQ_NO 0xff
+
+#define DEFAULT_POW_GRP 0
+
+/* Macros to get octeon config params */
+#define CFG_GET_IQ_CFG(cfg) ((cfg)->iq)
+#define CFG_GET_IQ_MAX_Q(cfg) ((cfg)->iq.max_iqs)
+#define CFG_GET_IQ_PENDING_LIST_SIZE(cfg) ((cfg)->iq.pending_list_size)
+#define CFG_GET_IQ_INSTR_TYPE(cfg) ((cfg)->iq.instr_type)
+#define CFG_GET_IQ_DB_MIN(cfg) ((cfg)->iq.db_min)
+#define CFG_GET_IQ_DB_TIMEOUT(cfg) ((cfg)->iq.db_timeout)
+
+#define CFG_GET_OQ_MAX_Q(cfg) ((cfg)->oq.max_oqs)
+#define CFG_GET_OQ_INFO_PTR(cfg) ((cfg)->oq.info_ptr)
+#define CFG_GET_OQ_PKTS_PER_INTR(cfg) ((cfg)->oq.pkts_per_intr)
+#define CFG_GET_OQ_REFILL_THRESHOLD(cfg) ((cfg)->oq.refill_threshold)
+#define CFG_GET_OQ_INTR_PKT(cfg) ((cfg)->oq.oq_intr_pkt)
+#define CFG_GET_OQ_INTR_TIME(cfg) ((cfg)->oq.oq_intr_time)
+#define CFG_SET_OQ_INTR_PKT(cfg, val) (cfg)->oq.oq_intr_pkt = val
+#define CFG_SET_OQ_INTR_TIME(cfg, val) (cfg)->oq.oq_intr_time = val
+
+#define CFG_GET_DMA_INTR_PKT(cfg) ((cfg)->dma.dma_intr_pkt)
+#define CFG_GET_DMA_INTR_TIME(cfg) ((cfg)->dma.dma_intr_time)
+#define CFG_GET_NUM_NIC_PORTS(cfg) ((cfg)->num_nic_ports)
+#define CFG_GET_NUM_DEF_TX_DESCS(cfg) ((cfg)->num_def_tx_descs)
+#define CFG_GET_NUM_DEF_RX_DESCS(cfg) ((cfg)->num_def_rx_descs)
+#define CFG_GET_DEF_RX_BUF_SIZE(cfg) ((cfg)->def_rx_buf_size)
+
+#define CFG_GET_MAX_TXQS_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].max_txqs)
+#define CFG_GET_NUM_TXQS_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].num_txqs)
+#define CFG_GET_MAX_RXQS_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].max_rxqs)
+#define CFG_GET_NUM_RXQS_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].num_rxqs)
+#define CFG_GET_NUM_RX_DESCS_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].num_rx_descs)
+#define CFG_GET_NUM_TX_DESCS_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].num_tx_descs)
+#define CFG_GET_NUM_RX_BUF_SIZE_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].rx_buf_size)
+#define CFG_GET_BASE_QUE_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].base_queue)
+#define CFG_GET_GMXID_NIC_IF(cfg, idx) \
+ ((cfg)->nic_if_cfg[idx].gmx_port_id)
+
+#define CFG_GET_CTRL_Q_GRP(cfg) ((cfg)->misc.ctrlq_grp)
+#define CFG_GET_HOST_LINK_QUERY_INTERVAL(cfg) \
+ ((cfg)->misc.host_link_query_interval)
+#define CFG_GET_OCT_LINK_QUERY_INTERVAL(cfg) \
+ ((cfg)->misc.oct_link_query_interval)
+#define CFG_GET_IS_SLI_BP_ON(cfg) ((cfg)->misc.enable_sli_oq_bp)
+
+/* Max IOQs per OCTEON Link */
+#define MAX_IOQS_PER_NICIF 32
+
+enum lio_card_type {
+ LIO_210SV = 0, /* Two port, 66xx */
+ LIO_210NV, /* Two port, 68xx */
+ LIO_410NV /* Four port, 68xx */
+};
+
+#define LIO_210SV_NAME "210sv"
+#define LIO_210NV_NAME "210nv"
+#define LIO_410NV_NAME "410nv"
+
+/** Structure to define the configuration attributes for each Input queue.
+ * Applicable to all Octeon processors
+ **/
+struct octeon_iq_config {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 reserved:32;
+
+ /** Minimum ticks to wait before checking for pending instructions. */
+ u64 db_timeout:16;
+
+ /** Minimum number of commands pending to be posted to Octeon
+ * before driver hits the Input queue doorbell.
+ */
+ u64 db_min:8;
+
+ /** Command size - 32 or 64 bytes */
+ u64 instr_type:32;
+
+ /** Pending list size (usually set to the sum of the size of all Input
+ * queues)
+ */
+ u64 pending_list_size:32;
+
+ /* Max number of IQs available */
+ u64 max_iqs:8;
+#else
+ /* Max number of IQs available */
+ u64 max_iqs:8;
+
+ /** Pending list size (usually set to the sum of the size of all Input
+ * queues)
+ */
+ u64 pending_list_size:32;
+
+ /** Command size - 32 or 64 bytes */
+ u64 instr_type:32;
+
+ /** Minimum number of commands pending to be posted to Octeon
+ * before driver hits the Input queue doorbell.
+ */
+ u64 db_min:8;
+
+ /** Minimum ticks to wait before checking for pending instructions. */
+ u64 db_timeout:16;
+
+ u64 reserved:32;
+#endif
+};
+
+/** Structure to define the configuration attributes for each Output queue.
+ * Applicable to all Octeon processors
+ **/
+struct octeon_oq_config {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 reserved:16;
+
+ u64 pkts_per_intr:16;
+
+ /** Interrupt Coalescing (Time Interval). Octeon will interrupt the
+ * host if atleast one packet was sent in the time interval specified
+ * by this field. The driver uses time interval interrupt coalescing
+ * by default. The time is specified in microseconds.
+ */
+ u64 oq_intr_time:16;
+
+ /** Interrupt Coalescing (Packet Count). Octeon will interrupt the host
+ * only if it sent as many packets as specified by this field.
+ * The driver
+ * usually does not use packet count interrupt coalescing.
+ */
+ u64 oq_intr_pkt:16;
+
+ /** The number of buffers that were consumed during packet processing by
+ * the driver on this Output queue before the driver attempts to
+ * replenish
+ * the descriptor ring with new buffers.
+ */
+ u64 refill_threshold:16;
+
+ /** If set, the Output queue uses info-pointer mode. (Default: 1 ) */
+ u64 info_ptr:32;
+
+ /* Max number of OQs available */
+ u64 max_oqs:8;
+
+#else
+ /* Max number of OQs available */
+ u64 max_oqs:8;
+
+ /** If set, the Output queue uses info-pointer mode. (Default: 1 ) */
+ u64 info_ptr:32;
+
+ /** The number of buffers that were consumed during packet processing by
+ * the driver on this Output queue before the driver attempts to
+ * replenish
+ * the descriptor ring with new buffers.
+ */
+ u64 refill_threshold:16;
+
+ /** Interrupt Coalescing (Packet Count). Octeon will interrupt the host
+ * only if it sent as many packets as specified by this field.
+ * The driver
+ * usually does not use packet count interrupt coalescing.
+ */
+ u64 oq_intr_pkt:16;
+
+ /** Interrupt Coalescing (Time Interval). Octeon will interrupt the
+ * host if atleast one packet was sent in the time interval specified
+ * by this field. The driver uses time interval interrupt coalescing
+ * by default. The time is specified in microseconds.
+ */
+ u64 oq_intr_time:16;
+
+ u64 pkts_per_intr:16;
+
+ u64 reserved:16;
+#endif
+
+};
+
+/** This structure conatins the NIC link configuration attributes,
+ * common for all the OCTEON Modles.
+ */
+struct octeon_nic_if_config {
+#ifdef __BIG_ENDIAN_BITFIELD
+ u64 reserved:56;
+
+ u64 base_queue:16;
+
+ u64 gmx_port_id:8;
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ u64 rx_buf_size:16;
+
+ /* Num of desc for tx rings */
+ u64 num_tx_descs:16;
+
+ /* Num of desc for rx rings */
+ u64 num_rx_descs:16;
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ u64 num_rxqs:16;
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ u64 max_rxqs:16;
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ u64 num_txqs:16;
+
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ u64 max_txqs:16;
+#else
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ u64 max_txqs:16;
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ u64 num_txqs:16;
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ u64 max_rxqs:16;
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ u64 num_rxqs:16;
+
+ /* Num of desc for rx rings */
+ u64 num_rx_descs:16;
+
+ /* Num of desc for tx rings */
+ u64 num_tx_descs:16;
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ u64 rx_buf_size:16;
+
+ u64 gmx_port_id:8;
+
+ u64 base_queue:16;
+
+ u64 reserved:56;
+#endif
+
+};
+
+/** Structure to define the configuration attributes for meta data.
+ * Applicable to all Octeon processors.
+ */
+
+struct octeon_misc_config {
+#ifdef __BIG_ENDIAN_BITFIELD
+ /** Host link status polling period */
+ u64 host_link_query_interval:32;
+ /** Oct link status polling period */
+ u64 oct_link_query_interval:32;
+
+ u64 enable_sli_oq_bp:1;
+ /** Control IQ Group */
+ u64 ctrlq_grp:4;
+#else
+ /** Control IQ Group */
+ u64 ctrlq_grp:4;
+ /** BP for SLI OQ */
+ u64 enable_sli_oq_bp:1;
+ /** Host link status polling period */
+ u64 oct_link_query_interval:32;
+ /** Oct link status polling period */
+ u64 host_link_query_interval:32;
+#endif
+};
+
+/** Structure to define the configuration for all OCTEON processors. */
+struct octeon_config {
+ u16 card_type;
+ char *card_name;
+
+ /** Input Queue attributes. */
+ struct octeon_iq_config iq;
+
+ /** Output Queue attributes. */
+ struct octeon_oq_config oq;
+
+ /** NIC Port Configuration */
+ struct octeon_nic_if_config nic_if_cfg[MAX_OCTEON_NICIF];
+
+ /** Miscellaneous attributes */
+ struct octeon_misc_config misc;
+
+ int num_nic_ports;
+
+ int num_def_tx_descs;
+
+ /* Num of desc for rx rings */
+ int num_def_rx_descs;
+
+ int def_rx_buf_size;
+
+};
+
+/* The following config values are fixed and should not be modified. */
+
+/* Maximum address space to be mapped for Octeon's BAR1 index-based access. */
+#define MAX_BAR1_MAP_INDEX 2
+#define OCTEON_BAR1_ENTRY_SIZE (4 * 1024 * 1024)
+
+/* BAR1 Index 0 to (MAX_BAR1_MAP_INDEX - 1) for normal mapped memory access.
+ * Bar1 register at MAX_BAR1_MAP_INDEX used by driver for dynamic access.
+ */
+#define MAX_BAR1_IOREMAP_SIZE ((MAX_BAR1_MAP_INDEX + 1) * \
+ OCTEON_BAR1_ENTRY_SIZE)
+
+/* Response lists - 1 ordered, 1 unordered-blocking, 1 unordered-nonblocking
+ * NoResponse Lists are now maintained with each IQ. (Dec' 2007).
+ */
+#define MAX_RESPONSE_LISTS 4
+
+/* Opcode hash bits. The opcode is hashed on the lower 6-bits to lookup the
+ * dispatch table.
+ */
+#define OPCODE_MASK_BITS 6
+
+/* Mask for the 6-bit lookup hash */
+#define OCTEON_OPCODE_MASK 0x3f
+
+/* Size of the dispatch table. The 6-bit hash can index into 2^6 entries */
+#define DISPATCH_LIST_SIZE BIT(OPCODE_MASK_BITS)
+
+/* Maximum number of Octeon Instruction (command) queues */
+#define MAX_OCTEON_INSTR_QUEUES CN6XXX_MAX_INPUT_QUEUES
+
+/* Maximum number of Octeon Instruction (command) queues */
+#define MAX_OCTEON_OUTPUT_QUEUES CN6XXX_MAX_OUTPUT_QUEUES
+
+#endif /* __OCTEON_CONFIG_H__ */
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/**
+ * @file octeon_console.c
+ */
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+#include "octeon_mem_ops.h"
+
+static void octeon_remote_lock(void);
+static void octeon_remote_unlock(void);
+static u64 cvmx_bootmem_phy_named_block_find(struct octeon_device *oct,
+ const char *name,
+ u32 flags);
+
+#define MIN(a, b) min((a), (b))
+#define CAST_ULL(v) ((u64)(v))
+
+#define BOOTLOADER_PCI_READ_BUFFER_DATA_ADDR 0x0006c008
+#define BOOTLOADER_PCI_READ_BUFFER_LEN_ADDR 0x0006c004
+#define BOOTLOADER_PCI_READ_BUFFER_OWNER_ADDR 0x0006c000
+#define BOOTLOADER_PCI_READ_DESC_ADDR 0x0006c100
+#define BOOTLOADER_PCI_WRITE_BUFFER_STR_LEN 248
+
+#define OCTEON_PCI_IO_BUF_OWNER_OCTEON 0x00000001
+#define OCTEON_PCI_IO_BUF_OWNER_HOST 0x00000002
+
+/** Can change without breaking ABI */
+#define CVMX_BOOTMEM_NUM_NAMED_BLOCKS 64
+
+/** minimum alignment of bootmem alloced blocks */
+#define CVMX_BOOTMEM_ALIGNMENT_SIZE (16ull)
+
+/** CVMX bootmem descriptor major version */
+#define CVMX_BOOTMEM_DESC_MAJ_VER 3
+/* CVMX bootmem descriptor minor version */
+#define CVMX_BOOTMEM_DESC_MIN_VER 0
+
+/* Current versions */
+#define OCTEON_PCI_CONSOLE_MAJOR_VERSION 1
+#define OCTEON_PCI_CONSOLE_MINOR_VERSION 0
+#define OCTEON_PCI_CONSOLE_BLOCK_NAME "__pci_console"
+#define OCTEON_CONSOLE_POLL_INTERVAL_MS 100 /* 10 times per second */
+
+/* First three members of cvmx_bootmem_desc are left in original
+** positions for backwards compatibility.
+** Assumes big endian target
+*/
+struct cvmx_bootmem_desc {
+ /** spinlock to control access to list */
+ u32 lock;
+
+ /** flags for indicating various conditions */
+ u32 flags;
+
+ u64 head_addr;
+
+ /** incremented changed when incompatible changes made */
+ u32 major_version;
+
+ /** incremented changed when compatible changes made,
+ * reset to zero when major incremented
+ */
+ u32 minor_version;
+
+ u64 app_data_addr;
+ u64 app_data_size;
+
+ /** number of elements in named blocks array */
+ u32 nb_num_blocks;
+
+ /** length of name array in bootmem blocks */
+ u32 named_block_name_len;
+
+ /** address of named memory block descriptors */
+ u64 named_block_array_addr;
+};
+
+/* Structure that defines a single console.
+ *
+ * Note: when read_index == write_index, the buffer is empty.
+ * The actual usable size of each console is console_buf_size -1;
+ */
+struct octeon_pci_console {
+ u64 input_base_addr;
+ u32 input_read_index;
+ u32 input_write_index;
+ u64 output_base_addr;
+ u32 output_read_index;
+ u32 output_write_index;
+ u32 lock;
+ u32 buf_size;
+};
+
+/* This is the main container structure that contains all the information
+ * about all PCI consoles. The address of this structure is passed to various
+ * routines that operation on PCI consoles.
+ */
+struct octeon_pci_console_desc {
+ u32 major_version;
+ u32 minor_version;
+ u32 lock;
+ u32 flags;
+ u32 num_consoles;
+ u32 pad;
+ /* must be 64 bit aligned here... */
+ /* Array of addresses of octeon_pci_console structures */
+ u64 console_addr_array[0];
+ /* Implicit storage for console_addr_array */
+};
+
+/**
+ * This macro returns the size of a member of a structure.
+ * Logically it is the same as "sizeof(s::field)" in C++, but
+ * C lacks the "::" operator.
+ */
+#define SIZEOF_FIELD(s, field) sizeof(((s *)NULL)->field)
+
+/**
+ * This macro returns a member of the cvmx_bootmem_desc
+ * structure. These members can't be directly addressed as
+ * they might be in memory not directly reachable. In the case
+ * where bootmem is compiled with LINUX_HOST, the structure
+ * itself might be located on a remote Octeon. The argument
+ * "field" is the member name of the cvmx_bootmem_desc to read.
+ * Regardless of the type of the field, the return type is always
+ * a u64.
+ */
+#define CVMX_BOOTMEM_DESC_GET_FIELD(oct, field) \
+ __cvmx_bootmem_desc_get(oct, oct->bootmem_desc_addr, \
+ offsetof(struct cvmx_bootmem_desc, field), \
+ SIZEOF_FIELD(struct cvmx_bootmem_desc, field))
+
+#define __cvmx_bootmem_lock(flags)
+#define __cvmx_bootmem_unlock(flags)
+
+/**
+ * This macro returns a member of the
+ * cvmx_bootmem_named_block_desc structure. These members can't
+ * be directly addressed as they might be in memory not directly
+ * reachable. In the case where bootmem is compiled with
+ * LINUX_HOST, the structure itself might be located on a remote
+ * Octeon. The argument "field" is the member name of the
+ * cvmx_bootmem_named_block_desc to read. Regardless of the type
+ * of the field, the return type is always a u64. The "addr"
+ * parameter is the physical address of the structure.
+ */
+#define CVMX_BOOTMEM_NAMED_GET_FIELD(oct, addr, field) \
+ __cvmx_bootmem_desc_get(oct, addr, \
+ offsetof(struct cvmx_bootmem_named_block_desc, field), \
+ SIZEOF_FIELD(struct cvmx_bootmem_named_block_desc, field))
+
+/**
+ * This function is the implementation of the get macros defined
+ * for individual structure members. The argument are generated
+ * by the macros inorder to read only the needed memory.
+ *
+ * @param oct Pointer to current octeon device
+ * @param base 64bit physical address of the complete structure
+ * @param offset Offset from the beginning of the structure to the member being
+ * accessed.
+ * @param size Size of the structure member.
+ *
+ * @return Value of the structure member promoted into a u64.
+ */
+static inline u64 __cvmx_bootmem_desc_get(struct octeon_device *oct,
+ u64 base,
+ u32 offset,
+ u32 size)
+{
+ base = (1ull << 63) | (base + offset);
+ switch (size) {
+ case 4:
+ return octeon_read_device_mem32(oct, base);
+ case 8:
+ return octeon_read_device_mem64(oct, base);
+ default:
+ return 0;
+ }
+}
+
+/**
+ * This function retrieves the string name of a named block. It is
+ * more complicated than a simple memcpy() since the named block
+ * descriptor may not be directly accessible.
+ *
+ * @param addr Physical address of the named block descriptor
+ * @param str String to receive the named block string name
+ * @param len Length of the string buffer, which must match the length
+ * stored in the bootmem descriptor.
+ */
+static void CVMX_BOOTMEM_NAMED_GET_NAME(struct octeon_device *oct,
+ u64 addr,
+ char *str,
+ u32 len)
+{
+ addr += offsetof(struct cvmx_bootmem_named_block_desc, name);
+ octeon_pci_read_core_mem(oct, addr, str, len);
+ str[len] = 0;
+}
+
+/* See header file for descriptions of functions */
+
+/**
+ * Check the version information on the bootmem descriptor
+ *
+ * @param exact_match
+ * Exact major version to check against. A zero means
+ * check that the version supports named blocks.
+ *
+ * @return Zero if the version is correct. Negative if the version is
+ * incorrect. Failures also cause a message to be displayed.
+ */
+static int __cvmx_bootmem_check_version(struct octeon_device *oct,
+ u32 exact_match)
+{
+ u32 major_version;
+ u32 minor_version;
+
+ if (!oct->bootmem_desc_addr)
+ oct->bootmem_desc_addr =
+ octeon_read_device_mem64(oct,
+ BOOTLOADER_PCI_READ_DESC_ADDR);
+ major_version =
+ (u32)CVMX_BOOTMEM_DESC_GET_FIELD(oct, major_version);
+ minor_version =
+ (u32)CVMX_BOOTMEM_DESC_GET_FIELD(oct, minor_version);
+ dev_dbg(&oct->pci_dev->dev, "%s: major_version=%d\n", __func__,
+ major_version);
+ if ((major_version > 3) ||
+ (exact_match && major_version != exact_match)) {
+ dev_err(&oct->pci_dev->dev, "bootmem ver mismatch %d.%d addr:0x%llx\n",
+ major_version, minor_version,
+ CAST_ULL(oct->bootmem_desc_addr));
+ return -1;
+ } else {
+ return 0;
+ }
+}
+
+static const struct cvmx_bootmem_named_block_desc
+*__cvmx_bootmem_find_named_block_flags(struct octeon_device *oct,
+ const char *name, u32 flags)
+{
+ struct cvmx_bootmem_named_block_desc *desc =
+ &oct->bootmem_named_block_desc;
+ u64 named_addr = cvmx_bootmem_phy_named_block_find(oct, name, flags);
+
+ if (named_addr) {
+ desc->base_addr = CVMX_BOOTMEM_NAMED_GET_FIELD(oct, named_addr,
+ base_addr);
+ desc->size =
+ CVMX_BOOTMEM_NAMED_GET_FIELD(oct, named_addr, size);
+ strncpy(desc->name, name, sizeof(desc->name));
+ desc->name[sizeof(desc->name) - 1] = 0;
+ return &oct->bootmem_named_block_desc;
+ } else {
+ return NULL;
+ }
+}
+
+static u64 cvmx_bootmem_phy_named_block_find(struct octeon_device *oct,
+ const char *name,
+ u32 flags)
+{
+ u64 result = 0;
+
+ __cvmx_bootmem_lock(flags);
+ if (!__cvmx_bootmem_check_version(oct, 3)) {
+ u32 i;
+ u64 named_block_array_addr =
+ CVMX_BOOTMEM_DESC_GET_FIELD(oct,
+ named_block_array_addr);
+ u32 num_blocks = (u32)
+ CVMX_BOOTMEM_DESC_GET_FIELD(oct, nb_num_blocks);
+ u32 name_length = (u32)
+ CVMX_BOOTMEM_DESC_GET_FIELD(oct, named_block_name_len);
+ u64 named_addr = named_block_array_addr;
+
+ for (i = 0; i < num_blocks; i++) {
+ u64 named_size =
+ CVMX_BOOTMEM_NAMED_GET_FIELD(oct, named_addr,
+ size);
+ if (name && named_size) {
+ char *name_tmp =
+ kmalloc(name_length + 1, GFP_KERNEL);
+ CVMX_BOOTMEM_NAMED_GET_NAME(oct, named_addr,
+ name_tmp,
+ name_length);
+ if (!strncmp(name, name_tmp, name_length)) {
+ result = named_addr;
+ kfree(name_tmp);
+ break;
+ }
+ kfree(name_tmp);
+ } else if (!name && !named_size) {
+ result = named_addr;
+ break;
+ }
+
+ named_addr +=
+ sizeof(struct cvmx_bootmem_named_block_desc);
+ }
+ }
+ __cvmx_bootmem_unlock(flags);
+ return result;
+}
+
+/**
+ * Find a named block on the remote Octeon
+ *
+ * @param name Name of block to find
+ * @param base_addr Address the block is at (OUTPUT)
+ * @param size The size of the block (OUTPUT)
+ *
+ * @return Zero on success, One on failure.
+ */
+static int octeon_named_block_find(struct octeon_device *oct, const char *name,
+ u64 *base_addr, u64 *size)
+{
+ const struct cvmx_bootmem_named_block_desc *named_block;
+
+ octeon_remote_lock();
+ named_block = __cvmx_bootmem_find_named_block_flags(oct, name, 0);
+ octeon_remote_unlock();
+ if (named_block) {
+ *base_addr = named_block->base_addr;
+ *size = named_block->size;
+ return 0;
+ }
+ return 1;
+}
+
+static void octeon_remote_lock(void)
+{
+ /* fill this in if any sharing is needed */
+}
+
+static void octeon_remote_unlock(void)
+{
+ /* fill this in if any sharing is needed */
+}
+
+int octeon_console_send_cmd(struct octeon_device *oct, char *cmd_str,
+ u32 wait_hundredths)
+{
+ u32 len = strlen(cmd_str);
+
+ dev_dbg(&oct->pci_dev->dev, "sending \"%s\" to bootloader\n", cmd_str);
+
+ if (len > BOOTLOADER_PCI_WRITE_BUFFER_STR_LEN - 1) {
+ dev_err(&oct->pci_dev->dev, "Command string too long, max length is: %d\n",
+ BOOTLOADER_PCI_WRITE_BUFFER_STR_LEN - 1);
+ return -1;
+ }
+
+ if (octeon_wait_for_bootloader(oct, wait_hundredths) != 0) {
+ dev_err(&oct->pci_dev->dev, "Bootloader not ready for command.\n");
+ return -1;
+ }
+
+ /* Write command to bootloader */
+ octeon_remote_lock();
+ octeon_pci_write_core_mem(oct, BOOTLOADER_PCI_READ_BUFFER_DATA_ADDR,
+ (u8 *)cmd_str, len);
+ octeon_write_device_mem32(oct, BOOTLOADER_PCI_READ_BUFFER_LEN_ADDR,
+ len);
+ octeon_write_device_mem32(oct, BOOTLOADER_PCI_READ_BUFFER_OWNER_ADDR,
+ OCTEON_PCI_IO_BUF_OWNER_OCTEON);
+
+ /* Bootloader should accept command very quickly
+ * if it really was ready
+ */
+ if (octeon_wait_for_bootloader(oct, 200) != 0) {
+ octeon_remote_unlock();
+ dev_err(&oct->pci_dev->dev, "Bootloader did not accept command.\n");
+ return -1;
+ }
+ octeon_remote_unlock();
+ return 0;
+}
+
+int octeon_wait_for_bootloader(struct octeon_device *oct,
+ u32 wait_time_hundredths)
+{
+ dev_dbg(&oct->pci_dev->dev, "waiting %d0 ms for bootloader\n",
+ wait_time_hundredths);
+
+ if (octeon_mem_access_ok(oct))
+ return -1;
+
+ while (wait_time_hundredths > 0 &&
+ octeon_read_device_mem32(oct,
+ BOOTLOADER_PCI_READ_BUFFER_OWNER_ADDR)
+ != OCTEON_PCI_IO_BUF_OWNER_HOST) {
+ if (--wait_time_hundredths <= 0)
+ return -1;
+ schedule_timeout_uninterruptible(HZ / 100);
+ }
+ return 0;
+}
+
+static void octeon_console_handle_result(struct octeon_device *oct,
+ size_t console_num,
+ char *buffer, s32 bytes_read)
+{
+ struct octeon_console *console;
+
+ console = &oct->console[console_num];
+
+ console->waiting = 0;
+}
+
+static char console_buffer[OCTEON_CONSOLE_MAX_READ_BYTES];
+
+static void output_console_line(struct octeon_device *oct,
+ struct octeon_console *console,
+ size_t console_num,
+ char *console_buffer,
+ s32 bytes_read)
+{
+ char *line;
+ s32 i;
+
+ line = console_buffer;
+ for (i = 0; i < bytes_read; i++) {
+ /* Output a line at a time, prefixed */
+ if (console_buffer[i] == '\n') {
+ console_buffer[i] = '\0';
+ if (console->leftover[0]) {
+ dev_info(&oct->pci_dev->dev, "%lu: %s%s\n",
+ console_num, console->leftover,
+ line);
+ console->leftover[0] = '\0';
+ } else {
+ dev_info(&oct->pci_dev->dev, "%lu: %s\n",
+ console_num, line);
+ }
+ line = &console_buffer[i + 1];
+ }
+ }
+
+ /* Save off any leftovers */
+ if (line != &console_buffer[bytes_read]) {
+ console_buffer[bytes_read] = '\0';
+ strcpy(console->leftover, line);
+ }
+}
+
+static void check_console(struct work_struct *work)
+{
+ s32 bytes_read, tries, total_read;
+ struct octeon_console *console;
+ struct cavium_wk *wk = (struct cavium_wk *)work;
+ struct octeon_device *oct = (struct octeon_device *)wk->ctxptr;
+ size_t console_num = wk->ctxul;
+ u32 delay;
+
+ console = &oct->console[console_num];
+ tries = 0;
+ total_read = 0;
+
+ do {
+ /* Take console output regardless of whether it will
+ * be logged
+ */
+ bytes_read =
+ octeon_console_read(oct, console_num, console_buffer,
+ sizeof(console_buffer) - 1, 0);
+ if (bytes_read > 0) {
+ total_read += bytes_read;
+ if (console->waiting) {
+ octeon_console_handle_result(oct, console_num,
+ console_buffer,
+ bytes_read);
+ }
+ if (octeon_console_debug_enabled(console_num)) {
+ output_console_line(oct, console, console_num,
+ console_buffer, bytes_read);
+ }
+ } else if (bytes_read < 0) {
+ dev_err(&oct->pci_dev->dev, "Error reading console %lu, ret=%d\n",
+ console_num, bytes_read);
+ }
+
+ tries++;
+ } while ((bytes_read > 0) && (tries < 16));
+
+ /* If nothing is read after polling the console,
+ * output any leftovers if any
+ */
+ if (octeon_console_debug_enabled(console_num) &&
+ (total_read == 0) && (console->leftover[0])) {
+ dev_info(&oct->pci_dev->dev, "%lu: %s\n",
+ console_num, console->leftover);
+ console->leftover[0] = '\0';
+ }
+
+ delay = OCTEON_CONSOLE_POLL_INTERVAL_MS;
+
+ schedule_delayed_work(&wk->work, msecs_to_jiffies(delay));
+}
+
+int octeon_init_consoles(struct octeon_device *oct)
+{
+ int ret = 0;
+ u64 addr, size;
+
+ ret = octeon_mem_access_ok(oct);
+ if (ret) {
+ dev_err(&oct->pci_dev->dev, "Memory access not okay'\n");
+ return ret;
+ }
+
+ ret = octeon_named_block_find(oct, OCTEON_PCI_CONSOLE_BLOCK_NAME, &addr,
+ &size);
+ if (ret) {
+ dev_err(&oct->pci_dev->dev, "Could not find console '%s'\n",
+ OCTEON_PCI_CONSOLE_BLOCK_NAME);
+ return ret;
+ }
+
+ /* num_consoles > 0, is an indication that the consoles
+ * are accessible
+ */
+ oct->num_consoles = octeon_read_device_mem32(oct,
+ addr + offsetof(struct octeon_pci_console_desc,
+ num_consoles));
+ oct->console_desc_addr = addr;
+
+ dev_dbg(&oct->pci_dev->dev, "Initialized consoles. %d available\n",
+ oct->num_consoles);
+
+ return ret;
+}
+
+int octeon_add_console(struct octeon_device *oct, u32 console_num)
+{
+ int ret = 0;
+ u32 delay;
+ u64 coreaddr;
+ struct delayed_work *work;
+ struct octeon_console *console;
+
+ if (console_num >= oct->num_consoles) {
+ dev_err(&oct->pci_dev->dev,
+ "trying to read from console number %d when only 0 to %d exist\n",
+ console_num, oct->num_consoles);
+ } else {
+ console = &oct->console[console_num];
+
+ console->waiting = 0;
+
+ coreaddr = oct->console_desc_addr + console_num * 8 +
+ offsetof(struct octeon_pci_console_desc,
+ console_addr_array);
+ console->addr = octeon_read_device_mem64(oct, coreaddr);
+ coreaddr = console->addr + offsetof(struct octeon_pci_console,
+ buf_size);
+ console->buffer_size = octeon_read_device_mem32(oct, coreaddr);
+ coreaddr = console->addr + offsetof(struct octeon_pci_console,
+ input_base_addr);
+ console->input_base_addr =
+ octeon_read_device_mem64(oct, coreaddr);
+ coreaddr = console->addr + offsetof(struct octeon_pci_console,
+ output_base_addr);
+ console->output_base_addr =
+ octeon_read_device_mem64(oct, coreaddr);
+ console->leftover[0] = '\0';
+
+ work = &oct->console_poll_work[console_num].work;
+
+ INIT_DELAYED_WORK(work, check_console);
+ oct->console_poll_work[console_num].ctxptr = (void *)oct;
+ oct->console_poll_work[console_num].ctxul = console_num;
+ delay = OCTEON_CONSOLE_POLL_INTERVAL_MS;
+ schedule_delayed_work(work, msecs_to_jiffies(delay));
+
+ if (octeon_console_debug_enabled(console_num)) {
+ ret = octeon_console_send_cmd(oct,
+ "setenv pci_console_active 1",
+ 2000);
+ }
+
+ console->active = 1;
+ }
+
+ return ret;
+}
+
+/**
+ * Removes all consoles
+ *
+ * @param oct octeon device
+ */
+void octeon_remove_consoles(struct octeon_device *oct)
+{
+ u32 i;
+ struct octeon_console *console;
+
+ for (i = 0; i < oct->num_consoles; i++) {
+ console = &oct->console[i];
+
+ if (!console->active)
+ continue;
+
+ cancel_delayed_work_sync(&oct->console_poll_work[i].
+ work);
+ console->addr = 0;
+ console->buffer_size = 0;
+ console->input_base_addr = 0;
+ console->output_base_addr = 0;
+ }
+
+ oct->num_consoles = 0;
+}
+
+static inline int octeon_console_free_bytes(u32 buffer_size,
+ u32 wr_idx,
+ u32 rd_idx)
+{
+ if (rd_idx >= buffer_size || wr_idx >= buffer_size)
+ return -1;
+
+ return ((buffer_size - 1) - (wr_idx - rd_idx)) % buffer_size;
+}
+
+static inline int octeon_console_avail_bytes(u32 buffer_size,
+ u32 wr_idx,
+ u32 rd_idx)
+{
+ if (rd_idx >= buffer_size || wr_idx >= buffer_size)
+ return -1;
+
+ return buffer_size - 1 -
+ octeon_console_free_bytes(buffer_size, wr_idx, rd_idx);
+}
+
+int octeon_console_read(struct octeon_device *oct, u32 console_num,
+ char *buffer, u32 buf_size, u32 flags)
+{
+ int bytes_to_read;
+ u32 rd_idx, wr_idx;
+ struct octeon_console *console;
+
+ if (console_num >= oct->num_consoles) {
+ dev_err(&oct->pci_dev->dev, "Attempted to read from disabled console %d\n",
+ console_num);
+ return 0;
+ }
+
+ console = &oct->console[console_num];
+
+ /* Check to see if any data is available.
+ * Maybe optimize this with 64-bit read.
+ */
+ rd_idx = octeon_read_device_mem32(oct, console->addr +
+ offsetof(struct octeon_pci_console, output_read_index));
+ wr_idx = octeon_read_device_mem32(oct, console->addr +
+ offsetof(struct octeon_pci_console, output_write_index));
+
+ bytes_to_read = octeon_console_avail_bytes(console->buffer_size,
+ wr_idx, rd_idx);
+ if (bytes_to_read <= 0)
+ return bytes_to_read;
+
+ bytes_to_read = MIN(bytes_to_read, (s32)buf_size);
+
+ /* Check to see if what we want to read is not contiguous, and limit
+ * ourselves to the contiguous block
+ */
+ if (rd_idx + bytes_to_read >= console->buffer_size)
+ bytes_to_read = console->buffer_size - rd_idx;
+
+ octeon_pci_read_core_mem(oct, console->output_base_addr + rd_idx,
+ buffer, bytes_to_read);
+ octeon_write_device_mem32(oct, console->addr +
+ offsetof(struct octeon_pci_console,
+ output_read_index),
+ (rd_idx + bytes_to_read) %
+ console->buffer_size);
+
+ return bytes_to_read;
+}
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/crc32.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+#include "octeon_mem_ops.h"
+
+/** Default configuration
+ * for CN66XX OCTEON Models.
+ */
+static struct octeon_config default_cn66xx_conf = {
+ .card_type = LIO_210SV,
+ .card_name = LIO_210SV_NAME,
+
+ /** IQ attributes */
+ .iq = {
+ .max_iqs = CN6XXX_CFG_IO_QUEUES,
+ .pending_list_size =
+ (CN6XXX_MAX_IQ_DESCRIPTORS * CN6XXX_CFG_IO_QUEUES),
+ .instr_type = OCTEON_64BYTE_INSTR,
+ .db_min = CN6XXX_DB_MIN,
+ .db_timeout = CN6XXX_DB_TIMEOUT,
+ }
+ ,
+
+ /** OQ attributes */
+ .oq = {
+ .max_oqs = CN6XXX_CFG_IO_QUEUES,
+ .info_ptr = OCTEON_OQ_INFOPTR_MODE,
+ .refill_threshold = CN6XXX_OQ_REFIL_THRESHOLD,
+ .oq_intr_pkt = CN6XXX_OQ_INTR_PKT,
+ .oq_intr_time = CN6XXX_OQ_INTR_TIME,
+ .pkts_per_intr = CN6XXX_OQ_PKTSPER_INTR,
+ }
+ ,
+
+ .num_nic_ports = DEFAULT_NUM_NIC_PORTS_66XX,
+ .num_def_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+ .num_def_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+ .def_rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ /* For ethernet interface 0: Port cfg Attributes */
+ .nic_if_cfg[0] = {
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ .max_txqs = MAX_TXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ .num_txqs = DEF_TXQS_PER_INTF,
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ .max_rxqs = MAX_RXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ .num_rxqs = DEF_RXQS_PER_INTF,
+
+ /* Num of desc for rx rings */
+ .num_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+
+ /* Num of desc for tx rings */
+ .num_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ .rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .base_queue = BASE_QUEUE_NOT_REQUESTED,
+
+ .gmx_port_id = 0,
+ },
+
+ .nic_if_cfg[1] = {
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ .max_txqs = MAX_TXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ .num_txqs = DEF_TXQS_PER_INTF,
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ .max_rxqs = MAX_RXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ .num_rxqs = DEF_RXQS_PER_INTF,
+
+ /* Num of desc for rx rings */
+ .num_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+
+ /* Num of desc for tx rings */
+ .num_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ .rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .base_queue = BASE_QUEUE_NOT_REQUESTED,
+
+ .gmx_port_id = 1,
+ },
+
+ /** Miscellaneous attributes */
+ .misc = {
+ /* Host driver link query interval */
+ .oct_link_query_interval = 100,
+
+ /* Octeon link query interval */
+ .host_link_query_interval = 500,
+
+ .enable_sli_oq_bp = 0,
+
+ /* Control queue group */
+ .ctrlq_grp = 1,
+ }
+ ,
+};
+
+/** Default configuration
+ * for CN68XX OCTEON Model.
+ */
+
+static struct octeon_config default_cn68xx_conf = {
+ .card_type = LIO_410NV,
+ .card_name = LIO_410NV_NAME,
+
+ /** IQ attributes */
+ .iq = {
+ .max_iqs = CN6XXX_CFG_IO_QUEUES,
+ .pending_list_size =
+ (CN6XXX_MAX_IQ_DESCRIPTORS * CN6XXX_CFG_IO_QUEUES),
+ .instr_type = OCTEON_64BYTE_INSTR,
+ .db_min = CN6XXX_DB_MIN,
+ .db_timeout = CN6XXX_DB_TIMEOUT,
+ }
+ ,
+
+ /** OQ attributes */
+ .oq = {
+ .max_oqs = CN6XXX_CFG_IO_QUEUES,
+ .info_ptr = OCTEON_OQ_INFOPTR_MODE,
+ .refill_threshold = CN6XXX_OQ_REFIL_THRESHOLD,
+ .oq_intr_pkt = CN6XXX_OQ_INTR_PKT,
+ .oq_intr_time = CN6XXX_OQ_INTR_TIME,
+ .pkts_per_intr = CN6XXX_OQ_PKTSPER_INTR,
+ }
+ ,
+
+ .num_nic_ports = DEFAULT_NUM_NIC_PORTS_68XX,
+ .num_def_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+ .num_def_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+ .def_rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .nic_if_cfg[0] = {
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ .max_txqs = MAX_TXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ .num_txqs = DEF_TXQS_PER_INTF,
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ .max_rxqs = MAX_RXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ .num_rxqs = DEF_RXQS_PER_INTF,
+
+ /* Num of desc for rx rings */
+ .num_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+
+ /* Num of desc for tx rings */
+ .num_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ .rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .base_queue = BASE_QUEUE_NOT_REQUESTED,
+
+ .gmx_port_id = 0,
+ },
+
+ .nic_if_cfg[1] = {
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ .max_txqs = MAX_TXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ .num_txqs = DEF_TXQS_PER_INTF,
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ .max_rxqs = MAX_RXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ .num_rxqs = DEF_RXQS_PER_INTF,
+
+ /* Num of desc for rx rings */
+ .num_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+
+ /* Num of desc for tx rings */
+ .num_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ .rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .base_queue = BASE_QUEUE_NOT_REQUESTED,
+
+ .gmx_port_id = 1,
+ },
+
+ .nic_if_cfg[2] = {
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ .max_txqs = MAX_TXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ .num_txqs = DEF_TXQS_PER_INTF,
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ .max_rxqs = MAX_RXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ .num_rxqs = DEF_RXQS_PER_INTF,
+
+ /* Num of desc for rx rings */
+ .num_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+
+ /* Num of desc for tx rings */
+ .num_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ .rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .base_queue = BASE_QUEUE_NOT_REQUESTED,
+
+ .gmx_port_id = 2,
+ },
+
+ .nic_if_cfg[3] = {
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ .max_txqs = MAX_TXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ .num_txqs = DEF_TXQS_PER_INTF,
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ .max_rxqs = MAX_RXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ .num_rxqs = DEF_RXQS_PER_INTF,
+
+ /* Num of desc for rx rings */
+ .num_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+
+ /* Num of desc for tx rings */
+ .num_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ .rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .base_queue = BASE_QUEUE_NOT_REQUESTED,
+
+ .gmx_port_id = 3,
+ },
+
+ /** Miscellaneous attributes */
+ .misc = {
+ /* Host driver link query interval */
+ .oct_link_query_interval = 100,
+
+ /* Octeon link query interval */
+ .host_link_query_interval = 500,
+
+ .enable_sli_oq_bp = 0,
+
+ /* Control queue group */
+ .ctrlq_grp = 1,
+ }
+ ,
+};
+
+/** Default configuration
+ * for CN68XX OCTEON Model.
+ */
+static struct octeon_config default_cn68xx_210nv_conf = {
+ .card_type = LIO_210NV,
+ .card_name = LIO_210NV_NAME,
+
+ /** IQ attributes */
+
+ .iq = {
+ .max_iqs = CN6XXX_CFG_IO_QUEUES,
+ .pending_list_size =
+ (CN6XXX_MAX_IQ_DESCRIPTORS * CN6XXX_CFG_IO_QUEUES),
+ .instr_type = OCTEON_64BYTE_INSTR,
+ .db_min = CN6XXX_DB_MIN,
+ .db_timeout = CN6XXX_DB_TIMEOUT,
+ }
+ ,
+
+ /** OQ attributes */
+ .oq = {
+ .max_oqs = CN6XXX_CFG_IO_QUEUES,
+ .info_ptr = OCTEON_OQ_INFOPTR_MODE,
+ .refill_threshold = CN6XXX_OQ_REFIL_THRESHOLD,
+ .oq_intr_pkt = CN6XXX_OQ_INTR_PKT,
+ .oq_intr_time = CN6XXX_OQ_INTR_TIME,
+ .pkts_per_intr = CN6XXX_OQ_PKTSPER_INTR,
+ }
+ ,
+
+ .num_nic_ports = DEFAULT_NUM_NIC_PORTS_68XX_210NV,
+ .num_def_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+ .num_def_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+ .def_rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .nic_if_cfg[0] = {
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ .max_txqs = MAX_TXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ .num_txqs = DEF_TXQS_PER_INTF,
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ .max_rxqs = MAX_RXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ .num_rxqs = DEF_RXQS_PER_INTF,
+
+ /* Num of desc for rx rings */
+ .num_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+
+ /* Num of desc for tx rings */
+ .num_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ .rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .base_queue = BASE_QUEUE_NOT_REQUESTED,
+
+ .gmx_port_id = 0,
+ },
+
+ .nic_if_cfg[1] = {
+ /* Max Txqs: Half for each of the two ports :max_iq/2 */
+ .max_txqs = MAX_TXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_txqs */
+ .num_txqs = DEF_TXQS_PER_INTF,
+
+ /* Max Rxqs: Half for each of the two ports :max_oq/2 */
+ .max_rxqs = MAX_RXQS_PER_INTF,
+
+ /* Actual configured value. Range could be: 1...max_rxqs */
+ .num_rxqs = DEF_RXQS_PER_INTF,
+
+ /* Num of desc for rx rings */
+ .num_rx_descs = CN6XXX_MAX_OQ_DESCRIPTORS,
+
+ /* Num of desc for tx rings */
+ .num_tx_descs = CN6XXX_MAX_IQ_DESCRIPTORS,
+
+ /* SKB size, We need not change buf size even for Jumbo frames.
+ * Octeon can send jumbo frames in 4 consecutive descriptors,
+ */
+ .rx_buf_size = CN6XXX_OQ_BUF_SIZE,
+
+ .base_queue = BASE_QUEUE_NOT_REQUESTED,
+
+ .gmx_port_id = 1,
+ },
+
+ /** Miscellaneous attributes */
+ .misc = {
+ /* Host driver link query interval */
+ .oct_link_query_interval = 100,
+
+ /* Octeon link query interval */
+ .host_link_query_interval = 500,
+
+ .enable_sli_oq_bp = 0,
+
+ /* Control queue group */
+ .ctrlq_grp = 1,
+ }
+ ,
+};
+
+enum {
+ OCTEON_CONFIG_TYPE_DEFAULT = 0,
+ NUM_OCTEON_CONFS,
+};
+
+static struct octeon_config_ptr {
+ u32 conf_type;
+} oct_conf_info[MAX_OCTEON_DEVICES] = {
+ {
+ OCTEON_CONFIG_TYPE_DEFAULT,
+ }, {
+ OCTEON_CONFIG_TYPE_DEFAULT,
+ }, {
+ OCTEON_CONFIG_TYPE_DEFAULT,
+ }, {
+ OCTEON_CONFIG_TYPE_DEFAULT,
+ },
+};
+
+static char oct_dev_state_str[OCT_DEV_STATES + 1][32] = {
+ "BEGIN", "PCI-MAP-DONE", "DISPATCH-INIT-DONE",
+ "IQ-INIT-DONE", "SCBUFF-POOL-INIT-DONE", "RESPLIST-INIT-DONE",
+ "DROQ-INIT-DONE", "IO-QUEUES-INIT-DONE", "CONSOLE-INIT-DONE",
+ "HOST-READY", "CORE-READY", "RUNNING", "IN-RESET",
+ "INVALID"
+};
+
+static char oct_dev_app_str[CVM_DRV_APP_COUNT + 1][32] = {
+ "BASE", "NIC", "UNKNOWN"};
+
+static struct octeon_device *octeon_device[MAX_OCTEON_DEVICES];
+static u32 octeon_device_count;
+
+static struct octeon_core_setup core_setup[MAX_OCTEON_DEVICES];
+
+void oct_set_config_info(int oct_id, int conf_type)
+{
+ if (conf_type < 0 || conf_type > (NUM_OCTEON_CONFS - 1))
+ conf_type = OCTEON_CONFIG_TYPE_DEFAULT;
+ oct_conf_info[oct_id].conf_type = conf_type;
+}
+
+void octeon_init_device_list(int conf_type)
+{
+ int i;
+
+ memset(octeon_device, 0, (sizeof(void *) * MAX_OCTEON_DEVICES));
+ for (i = 0; i < MAX_OCTEON_DEVICES; i++)
+ oct_set_config_info(i, conf_type);
+}
+
+static void *__retrieve_octeon_config_info(struct octeon_device *oct,
+ u16 card_type)
+{
+ u32 oct_id = oct->octeon_id;
+ void *ret = NULL;
+
+ switch (oct_conf_info[oct_id].conf_type) {
+ case OCTEON_CONFIG_TYPE_DEFAULT:
+ if (oct->chip_id == OCTEON_CN66XX) {
+ ret = (void *)&default_cn66xx_conf;
+ } else if ((oct->chip_id == OCTEON_CN68XX) &&
+ (card_type == LIO_210NV)) {
+ ret = (void *)&default_cn68xx_210nv_conf;
+ } else if ((oct->chip_id == OCTEON_CN68XX) &&
+ (card_type == LIO_410NV)) {
+ ret = (void *)&default_cn68xx_conf;
+ }
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static int __verify_octeon_config_info(struct octeon_device *oct, void *conf)
+{
+ switch (oct->chip_id) {
+ case OCTEON_CN66XX:
+ case OCTEON_CN68XX:
+ return lio_validate_cn6xxx_config_info(oct, conf);
+
+ default:
+ break;
+ }
+
+ return 1;
+}
+
+void *oct_get_config_info(struct octeon_device *oct, u16 card_type)
+{
+ void *conf = NULL;
+
+ conf = __retrieve_octeon_config_info(oct, card_type);
+ if (!conf)
+ return NULL;
+
+ if (__verify_octeon_config_info(oct, conf)) {
+ dev_err(&oct->pci_dev->dev, "Configuration verification failed\n");
+ return NULL;
+ }
+
+ return conf;
+}
+
+char *lio_get_state_string(atomic_t *state_ptr)
+{
+ s32 istate = (s32)atomic_read(state_ptr);
+
+ if (istate > OCT_DEV_STATES || istate < 0)
+ return oct_dev_state_str[OCT_DEV_STATE_INVALID];
+ return oct_dev_state_str[istate];
+}
+
+static char *get_oct_app_string(u32 app_mode)
+{
+ if (app_mode <= CVM_DRV_APP_END)
+ return oct_dev_app_str[app_mode - CVM_DRV_APP_START];
+ return oct_dev_app_str[CVM_DRV_INVALID_APP - CVM_DRV_APP_START];
+}
+
+int octeon_download_firmware(struct octeon_device *oct, const u8 *data,
+ size_t size)
+{
+ int ret = 0;
+ u8 *p;
+ u8 *buffer;
+ u32 crc32_result;
+ u64 load_addr;
+ u32 image_len;
+ struct octeon_firmware_file_header *h;
+ u32 i;
+
+ if (size < sizeof(struct octeon_firmware_file_header)) {
+ dev_err(&oct->pci_dev->dev, "Firmware file too small (%d < %d).\n",
+ (u32)size,
+ (u32)sizeof(struct octeon_firmware_file_header));
+ return -EINVAL;
+ }
+
+ h = (struct octeon_firmware_file_header *)data;
+
+ if (h->magic != be32_to_cpu(LIO_NIC_MAGIC)) {
+ dev_err(&oct->pci_dev->dev, "Unrecognized firmware file.\n");
+ return -EINVAL;
+ }
+
+ crc32_result =
+ crc32(~0, data,
+ sizeof(struct octeon_firmware_file_header) -
+ sizeof(u32)) ^ ~0U;
+ if (crc32_result != be32_to_cpu(h->crc32)) {
+ dev_err(&oct->pci_dev->dev, "Firmware CRC mismatch (0x%08x != 0x%08x).\n",
+ crc32_result, be32_to_cpu(h->crc32));
+ return -EINVAL;
+ }
+
+ if (memcmp(LIQUIDIO_VERSION, h->version, strlen(LIQUIDIO_VERSION))) {
+ dev_err(&oct->pci_dev->dev, "Unmatched firmware version. Expected %s, got %s.\n",
+ LIQUIDIO_VERSION, h->version);
+ return -EINVAL;
+ }
+
+ if (be32_to_cpu(h->num_images) > LIO_MAX_IMAGES) {
+ dev_err(&oct->pci_dev->dev, "Too many images in firmware file (%d).\n",
+ be32_to_cpu(h->num_images));
+ return -EINVAL;
+ }
+
+ dev_info(&oct->pci_dev->dev, "Firmware version: %s\n", h->version);
+ snprintf(oct->fw_info.liquidio_firmware_version, 32, "LIQUIDIO: %s",
+ h->version);
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ memcpy(buffer, data, size);
+
+ p = buffer + sizeof(struct octeon_firmware_file_header);
+
+ /* load all images */
+ for (i = 0; i < be32_to_cpu(h->num_images); i++) {
+ load_addr = be64_to_cpu(h->desc[i].addr);
+ image_len = be32_to_cpu(h->desc[i].len);
+
+ /* validate the image */
+ crc32_result = crc32(~0, p, image_len) ^ ~0U;
+ if (crc32_result != be32_to_cpu(h->desc[i].crc32)) {
+ dev_err(&oct->pci_dev->dev,
+ "Firmware CRC mismatch in image %d (0x%08x != 0x%08x).\n",
+ i, crc32_result,
+ be32_to_cpu(h->desc[i].crc32));
+ ret = -EINVAL;
+ goto done_downloading;
+ }
+
+ /* download the image */
+ octeon_pci_write_core_mem(oct, load_addr, p, image_len);
+
+ p += image_len;
+ dev_dbg(&oct->pci_dev->dev,
+ "Downloaded image %d (%d bytes) to address 0x%016llx\n",
+ i, image_len, load_addr);
+ }
+
+ /* Invoke the bootcmd */
+ ret = octeon_console_send_cmd(oct, h->bootcmd, 50);
+
+done_downloading:
+ kfree(buffer);
+
+ return ret;
+}
+
+void octeon_free_device_mem(struct octeon_device *oct)
+{
+ u32 i;
+
+ for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) {
+ /* could check mask as well */
+ if (oct->droq[i])
+ vfree(oct->droq[i]);
+ }
+
+ for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
+ /* could check mask as well */
+ if (oct->instr_queue[i])
+ vfree(oct->instr_queue[i]);
+ }
+
+ i = oct->octeon_id;
+ vfree(oct);
+
+ octeon_device[i] = NULL;
+ octeon_device_count--;
+}
+
+static struct octeon_device *octeon_allocate_device_mem(u32 pci_id,
+ u32 priv_size)
+{
+ struct octeon_device *oct;
+ u8 *buf = NULL;
+ u32 octdevsize = 0, configsize = 0, size;
+
+ switch (pci_id) {
+ case OCTEON_CN68XX:
+ case OCTEON_CN66XX:
+ configsize = sizeof(struct octeon_cn6xxx);
+ break;
+
+ default:
+ pr_err("%s: Unknown PCI Device: 0x%x\n",
+ __func__,
+ pci_id);
+ return NULL;
+ }
+
+ if (configsize & 0x7)
+ configsize += (8 - (configsize & 0x7));
+
+ octdevsize = sizeof(struct octeon_device);
+ if (octdevsize & 0x7)
+ octdevsize += (8 - (octdevsize & 0x7));
+
+ if (priv_size & 0x7)
+ priv_size += (8 - (priv_size & 0x7));
+
+ size = octdevsize + priv_size + configsize +
+ (sizeof(struct octeon_dispatch) * DISPATCH_LIST_SIZE);
+
+ buf = vmalloc(size);
+ if (!buf)
+ return NULL;
+
+ memset(buf, 0, size);
+
+ oct = (struct octeon_device *)buf;
+ oct->priv = (void *)(buf + octdevsize);
+ oct->chip = (void *)(buf + octdevsize + priv_size);
+ oct->dispatch.dlist = (struct octeon_dispatch *)
+ (buf + octdevsize + priv_size + configsize);
+
+ return oct;
+}
+
+struct octeon_device *octeon_allocate_device(u32 pci_id,
+ u32 priv_size)
+{
+ u32 oct_idx = 0;
+ struct octeon_device *oct = NULL;
+
+ for (oct_idx = 0; oct_idx < MAX_OCTEON_DEVICES; oct_idx++)
+ if (!octeon_device[oct_idx])
+ break;
+
+ if (oct_idx == MAX_OCTEON_DEVICES)
+ return NULL;
+
+ oct = octeon_allocate_device_mem(pci_id, priv_size);
+ if (!oct)
+ return NULL;
+
+ spin_lock_init(&oct->pci_win_lock);
+ spin_lock_init(&oct->mem_access_lock);
+
+ octeon_device_count++;
+ octeon_device[oct_idx] = oct;
+
+ oct->octeon_id = oct_idx;
+ snprintf((oct->device_name), sizeof(oct->device_name),
+ "LiquidIO%d", (oct->octeon_id));
+
+ return oct;
+}
+
+int octeon_setup_instr_queues(struct octeon_device *oct)
+{
+ u32 i, num_iqs = 0;
+ u32 num_descs = 0;
+
+ /* this causes queue 0 to be default queue */
+ if (OCTEON_CN6XXX(oct)) {
+ num_iqs = 1;
+ num_descs =
+ CFG_GET_NUM_DEF_TX_DESCS(CHIP_FIELD(oct, cn6xxx, conf));
+ }
+
+ oct->num_iqs = 0;
+
+ for (i = 0; i < num_iqs; i++) {
+ oct->instr_queue[i] =
+ vmalloc(sizeof(struct octeon_instr_queue));
+ if (!oct->instr_queue[i])
+ return 1;
+
+ memset(oct->instr_queue[i], 0,
+ sizeof(struct octeon_instr_queue));
+
+ oct->instr_queue[i]->app_ctx = (void *)(size_t)i;
+ if (octeon_init_instr_queue(oct, i, num_descs))
+ return 1;
+
+ oct->num_iqs++;
+ }
+
+ return 0;
+}
+
+int octeon_setup_output_queues(struct octeon_device *oct)
+{
+ u32 i, num_oqs = 0;
+ u32 num_descs = 0;
+ u32 desc_size = 0;
+
+ /* this causes queue 0 to be default queue */
+ if (OCTEON_CN6XXX(oct)) {
+ /* CFG_GET_OQ_MAX_BASE_Q(CHIP_FIELD(oct, cn6xxx, conf)); */
+ num_oqs = 1;
+ num_descs =
+ CFG_GET_NUM_DEF_RX_DESCS(CHIP_FIELD(oct, cn6xxx, conf));
+ desc_size =
+ CFG_GET_DEF_RX_BUF_SIZE(CHIP_FIELD(oct, cn6xxx, conf));
+ }
+
+ oct->num_oqs = 0;
+
+ for (i = 0; i < num_oqs; i++) {
+ oct->droq[i] = vmalloc(sizeof(*oct->droq[i]));
+ if (!oct->droq[i])
+ return 1;
+
+ memset(oct->droq[i], 0, sizeof(struct octeon_droq));
+
+ if (octeon_init_droq(oct, i, num_descs, desc_size, NULL))
+ return 1;
+
+ oct->num_oqs++;
+ }
+
+ return 0;
+}
+
+void octeon_set_io_queues_off(struct octeon_device *oct)
+{
+ /* Disable the i/p and o/p queues for this Octeon. */
+
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, 0);
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, 0);
+}
+
+void octeon_set_droq_pkt_op(struct octeon_device *oct,
+ u32 q_no,
+ u32 enable)
+{
+ u32 reg_val = 0;
+
+ /* Disable the i/p and o/p queues for this Octeon. */
+ reg_val = octeon_read_csr(oct, CN6XXX_SLI_PKT_OUT_ENB);
+
+ if (enable)
+ reg_val = reg_val | (1 << q_no);
+ else
+ reg_val = reg_val & (~(1 << q_no));
+
+ octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, reg_val);
+}
+
+int octeon_init_dispatch_list(struct octeon_device *oct)
+{
+ u32 i;
+
+ oct->dispatch.count = 0;
+
+ for (i = 0; i < DISPATCH_LIST_SIZE; i++) {
+ oct->dispatch.dlist[i].opcode = 0;
+ INIT_LIST_HEAD(&oct->dispatch.dlist[i].list);
+ }
+
+ for (i = 0; i <= REQTYPE_LAST; i++)
+ octeon_register_reqtype_free_fn(oct, i, NULL);
+
+ spin_lock_init(&oct->dispatch.lock);
+
+ return 0;
+}
+
+void octeon_delete_dispatch_list(struct octeon_device *oct)
+{
+ u32 i;
+ struct list_head freelist, *temp, *tmp2;
+
+ INIT_LIST_HEAD(&freelist);
+
+ spin_lock_bh(&oct->dispatch.lock);
+
+ for (i = 0; i < DISPATCH_LIST_SIZE; i++) {
+ struct list_head *dispatch;
+
+ dispatch = &oct->dispatch.dlist[i].list;
+ while (dispatch->next != dispatch) {
+ temp = dispatch->next;
+ list_del(temp);
+ list_add_tail(temp, &freelist);
+ }
+
+ oct->dispatch.dlist[i].opcode = 0;
+ }
+
+ oct->dispatch.count = 0;
+
+ spin_unlock_bh(&oct->dispatch.lock);
+
+ list_for_each_safe(temp, tmp2, &freelist) {
+ list_del(temp);
+ vfree(temp);
+ }
+}
+
+octeon_dispatch_fn_t
+octeon_get_dispatch(struct octeon_device *octeon_dev, u16 opcode,
+ u16 subcode)
+{
+ u32 idx;
+ struct list_head *dispatch;
+ octeon_dispatch_fn_t fn = NULL;
+ u16 combined_opcode = OPCODE_SUBCODE(opcode, subcode);
+
+ idx = combined_opcode & OCTEON_OPCODE_MASK;
+
+ spin_lock_bh(&octeon_dev->dispatch.lock);
+
+ if (octeon_dev->dispatch.count == 0) {
+ spin_unlock_bh(&octeon_dev->dispatch.lock);
+ return NULL;
+ }
+
+ if (!(octeon_dev->dispatch.dlist[idx].opcode)) {
+ spin_unlock_bh(&octeon_dev->dispatch.lock);
+ return NULL;
+ }
+
+ if (octeon_dev->dispatch.dlist[idx].opcode == combined_opcode) {
+ fn = octeon_dev->dispatch.dlist[idx].dispatch_fn;
+ } else {
+ list_for_each(dispatch,
+ &octeon_dev->dispatch.dlist[idx].list) {
+ if (((struct octeon_dispatch *)dispatch)->opcode ==
+ combined_opcode) {
+ fn = ((struct octeon_dispatch *)
+ dispatch)->dispatch_fn;
+ break;
+ }
+ }
+ }
+
+ spin_unlock_bh(&octeon_dev->dispatch.lock);
+ return fn;
+}
+
+/* octeon_register_dispatch_fn
+ * Parameters:
+ * octeon_id - id of the octeon device.
+ * opcode - opcode for which driver should call the registered function
+ * subcode - subcode for which driver should call the registered function
+ * fn - The function to call when a packet with "opcode" arrives in
+ * octeon output queues.
+ * fn_arg - The argument to be passed when calling function "fn".
+ * Description:
+ * Registers a function and its argument to be called when a packet
+ * arrives in Octeon output queues with "opcode".
+ * Returns:
+ * Success: 0
+ * Failure: 1
+ * Locks:
+ * No locks are held.
+ */
+int
+octeon_register_dispatch_fn(struct octeon_device *oct,
+ u16 opcode,
+ u16 subcode,
+ octeon_dispatch_fn_t fn, void *fn_arg)
+{
+ u32 idx;
+ octeon_dispatch_fn_t pfn;
+ u16 combined_opcode = OPCODE_SUBCODE(opcode, subcode);
+
+ idx = combined_opcode & OCTEON_OPCODE_MASK;
+
+ spin_lock_bh(&oct->dispatch.lock);
+ /* Add dispatch function to first level of lookup table */
+ if (oct->dispatch.dlist[idx].opcode == 0) {
+ oct->dispatch.dlist[idx].opcode = combined_opcode;
+ oct->dispatch.dlist[idx].dispatch_fn = fn;
+ oct->dispatch.dlist[idx].arg = fn_arg;
+ oct->dispatch.count++;
+ spin_unlock_bh(&oct->dispatch.lock);
+ return 0;
+ }
+
+ spin_unlock_bh(&oct->dispatch.lock);
+
+ /* Check if there was a function already registered for this
+ * opcode/subcode.
+ */
+ pfn = octeon_get_dispatch(oct, opcode, subcode);
+ if (!pfn) {
+ struct octeon_dispatch *dispatch;
+
+ dev_dbg(&oct->pci_dev->dev,
+ "Adding opcode to dispatch list linked list\n");
+ dispatch = (struct octeon_dispatch *)
+ vmalloc(sizeof(struct octeon_dispatch));
+ if (!dispatch) {
+ dev_err(&oct->pci_dev->dev,
+ "No memory to add dispatch function\n");
+ return 1;
+ }
+ dispatch->opcode = combined_opcode;
+ dispatch->dispatch_fn = fn;
+ dispatch->arg = fn_arg;
+
+ /* Add dispatch function to linked list of fn ptrs
+ * at the hashed index.
+ */
+ spin_lock_bh(&oct->dispatch.lock);
+ list_add(&dispatch->list, &oct->dispatch.dlist[idx].list);
+ oct->dispatch.count++;
+ spin_unlock_bh(&oct->dispatch.lock);
+
+ } else {
+ dev_err(&oct->pci_dev->dev,
+ "Found previously registered dispatch fn for opcode/subcode: %x/%x\n",
+ opcode, subcode);
+ return 1;
+ }
+
+ return 0;
+}
+
+/* octeon_unregister_dispatch_fn
+ * Parameters:
+ * oct - octeon device
+ * opcode - driver should unregister the function for this opcode
+ * subcode - driver should unregister the function for this subcode
+ * Description:
+ * Unregister the function set for this opcode+subcode.
+ * Returns:
+ * Success: 0
+ * Failure: 1
+ * Locks:
+ * No locks are held.
+ */
+int
+octeon_unregister_dispatch_fn(struct octeon_device *oct, u16 opcode,
+ u16 subcode)
+{
+ int retval = 0;
+ u32 idx;
+ struct list_head *dispatch, *dfree = NULL, *tmp2;
+ u16 combined_opcode = OPCODE_SUBCODE(opcode, subcode);
+
+ idx = combined_opcode & OCTEON_OPCODE_MASK;
+
+ spin_lock_bh(&oct->dispatch.lock);
+
+ if (oct->dispatch.count == 0) {
+ spin_unlock_bh(&oct->dispatch.lock);
+ dev_err(&oct->pci_dev->dev,
+ "No dispatch functions registered for this device\n");
+ return 1;
+ }
+
+ if (oct->dispatch.dlist[idx].opcode == combined_opcode) {
+ dispatch = &oct->dispatch.dlist[idx].list;
+ if (dispatch->next != dispatch) {
+ dispatch = dispatch->next;
+ oct->dispatch.dlist[idx].opcode =
+ ((struct octeon_dispatch *)dispatch)->opcode;
+ oct->dispatch.dlist[idx].dispatch_fn =
+ ((struct octeon_dispatch *)
+ dispatch)->dispatch_fn;
+ oct->dispatch.dlist[idx].arg =
+ ((struct octeon_dispatch *)dispatch)->arg;
+ list_del(dispatch);
+ dfree = dispatch;
+ } else {
+ oct->dispatch.dlist[idx].opcode = 0;
+ oct->dispatch.dlist[idx].dispatch_fn = NULL;
+ oct->dispatch.dlist[idx].arg = NULL;
+ }
+ } else {
+ retval = 1;
+ list_for_each_safe(dispatch, tmp2,
+ &(oct->dispatch.dlist[idx].
+ list)) {
+ if (((struct octeon_dispatch *)dispatch)->opcode ==
+ combined_opcode) {
+ list_del(dispatch);
+ dfree = dispatch;
+ retval = 0;
+ }
+ }
+ }
+
+ if (!retval)
+ oct->dispatch.count--;
+
+ spin_unlock_bh(&oct->dispatch.lock);
+
+ if (dfree)
+ vfree(dfree);
+
+ return retval;
+}
+
+int octeon_core_drv_init(struct octeon_recv_info *recv_info, void *buf)
+{
+ u32 i;
+ char app_name[16];
+ struct octeon_device *oct = (struct octeon_device *)buf;
+ struct octeon_recv_pkt *recv_pkt = recv_info->recv_pkt;
+ struct octeon_core_setup *cs = NULL;
+ u32 num_nic_ports = 0;
+
+ if (OCTEON_CN6XXX(oct))
+ num_nic_ports =
+ CFG_GET_NUM_NIC_PORTS(CHIP_FIELD(oct, cn6xxx, conf));
+
+ if (atomic_read(&oct->status) >= OCT_DEV_RUNNING) {
+ dev_err(&oct->pci_dev->dev, "Received CORE OK when device state is 0x%x\n",
+ atomic_read(&oct->status));
+ goto core_drv_init_err;
+ }
+
+ strncpy(app_name,
+ get_oct_app_string(
+ (u32)recv_pkt->rh.r_core_drv_init.app_mode),
+ sizeof(app_name) - 1);
+ oct->app_mode = (u32)recv_pkt->rh.r_core_drv_init.app_mode;
+ if (recv_pkt->rh.r_core_drv_init.app_mode == CVM_DRV_NIC_APP)
+ oct->fw_info.max_nic_ports =
+ (u32)recv_pkt->rh.r_core_drv_init.max_nic_ports;
+ oct->fw_info.num_gmx_ports =
+ (u32)recv_pkt->rh.r_core_drv_init.num_gmx_ports;
+
+ if (oct->fw_info.max_nic_ports < num_nic_ports) {
+ dev_err(&oct->pci_dev->dev,
+ "Config has more ports than firmware allows (%d > %d).\n",
+ num_nic_ports, oct->fw_info.max_nic_ports);
+ goto core_drv_init_err;
+ }
+ oct->fw_info.app_cap_flags = recv_pkt->rh.r_core_drv_init.app_cap_flags;
+ oct->fw_info.app_mode = (u32)recv_pkt->rh.r_core_drv_init.app_mode;
+
+ atomic_set(&oct->status, OCT_DEV_CORE_OK);
+
+ cs = &core_setup[oct->octeon_id];
+
+ if (recv_pkt->buffer_size[0] != sizeof(*cs)) {
+ dev_dbg(&oct->pci_dev->dev, "Core setup bytes expected %u found %d\n",
+ (u32)sizeof(*cs),
+ recv_pkt->buffer_size[0]);
+ }
+
+ memcpy(cs, get_rbd(recv_pkt->buffer_ptr[0]), sizeof(*cs));
+ strncpy(oct->boardinfo.name, cs->boardname, OCT_BOARD_NAME);
+ strncpy(oct->boardinfo.serial_number, cs->board_serial_number,
+ OCT_SERIAL_LEN);
+
+ octeon_swap_8B_data((u64 *)cs, (sizeof(*cs) >> 3));
+
+ oct->boardinfo.major = cs->board_rev_major;
+ oct->boardinfo.minor = cs->board_rev_minor;
+
+ dev_info(&oct->pci_dev->dev,
+ "Running %s (%llu Hz)\n",
+ app_name, CVM_CAST64(cs->corefreq));
+
+core_drv_init_err:
+ for (i = 0; i < recv_pkt->buffer_count; i++)
+ recv_buffer_free(recv_pkt->buffer_ptr[i]);
+ octeon_free_recv_info(recv_info);
+ return 0;
+}
+
+int octeon_get_tx_qsize(struct octeon_device *oct, u32 q_no)
+
+{
+ if (oct && (q_no < MAX_OCTEON_INSTR_QUEUES) &&
+ (oct->io_qmask.iq & (1UL << q_no)))
+ return oct->instr_queue[q_no]->max_count;
+
+ return -1;
+}
+
+int octeon_get_rx_qsize(struct octeon_device *oct, u32 q_no)
+{
+ if (oct && (q_no < MAX_OCTEON_OUTPUT_QUEUES) &&
+ (oct->io_qmask.oq & (1UL << q_no)))
+ return oct->droq[q_no]->max_count;
+ return -1;
+}
+
+/* Retruns the host firmware handshake OCTEON specific configuration */
+struct octeon_config *octeon_get_conf(struct octeon_device *oct)
+{
+ struct octeon_config *default_oct_conf = NULL;
+
+ /* check the OCTEON Device model & return the corresponding octeon
+ * configuration
+ */
+
+ if (OCTEON_CN6XXX(oct)) {
+ default_oct_conf =
+ (struct octeon_config *)(CHIP_FIELD(oct, cn6xxx, conf));
+ }
+
+ return default_oct_conf;
+}
+
+/* scratch register address is same in all the OCT-II and CN70XX models */
+#define CNXX_SLI_SCRATCH1 0x3C0
+
+/** Get the octeon device pointer.
+ * @param octeon_id - The id for which the octeon device pointer is required.
+ * @return Success: Octeon device pointer.
+ * @return Failure: NULL.
+ */
+struct octeon_device *lio_get_device(u32 octeon_id)
+{
+ if (octeon_id >= MAX_OCTEON_DEVICES)
+ return NULL;
+ else
+ return octeon_device[octeon_id];
+}
+
+u64 lio_pci_readq(struct octeon_device *oct, u64 addr)
+{
+ u64 val64;
+ unsigned long flags;
+ u32 val32, addrhi;
+
+ spin_lock_irqsave(&oct->pci_win_lock, flags);
+
+ /* The windowed read happens when the LSB of the addr is written.
+ * So write MSB first
+ */
+ addrhi = (addr >> 32);
+ if ((oct->chip_id == OCTEON_CN66XX) || (oct->chip_id == OCTEON_CN68XX))
+ addrhi |= 0x00060000;
+ writel(addrhi, oct->reg_list.pci_win_rd_addr_hi);
+
+ /* Read back to preserve ordering of writes */
+ val32 = readl(oct->reg_list.pci_win_rd_addr_hi);
+
+ writel(addr & 0xffffffff, oct->reg_list.pci_win_rd_addr_lo);
+ val32 = readl(oct->reg_list.pci_win_rd_addr_lo);
+
+ val64 = readq(oct->reg_list.pci_win_rd_data);
+
+ spin_unlock_irqrestore(&oct->pci_win_lock, flags);
+
+ return val64;
+}
+
+void lio_pci_writeq(struct octeon_device *oct,
+ u64 val,
+ u64 addr)
+{
+ u32 val32;
+ unsigned long flags;
+
+ spin_lock_irqsave(&oct->pci_win_lock, flags);
+
+ writeq(addr, oct->reg_list.pci_win_wr_addr);
+
+ /* The write happens when the LSB is written. So write MSB first. */
+ writel(val >> 32, oct->reg_list.pci_win_wr_data_hi);
+ /* Read the MSB to ensure ordering of writes. */
+ val32 = readl(oct->reg_list.pci_win_wr_data_hi);
+
+ writel(val & 0xffffffff, oct->reg_list.pci_win_wr_data_lo);
+
+ spin_unlock_irqrestore(&oct->pci_win_lock, flags);
+}
+
+int octeon_mem_access_ok(struct octeon_device *oct)
+{
+ u64 access_okay = 0;
+
+ /* Check to make sure a DDR interface is enabled */
+ u64 lmc0_reset_ctl = lio_pci_readq(oct, CN6XXX_LMC0_RESET_CTL);
+
+ access_okay = (lmc0_reset_ctl & CN6XXX_LMC0_RESET_CTL_DDR3RST_MASK);
+
+ return access_okay ? 0 : 1;
+}
+
+int octeon_wait_for_ddr_init(struct octeon_device *oct, u32 *timeout)
+{
+ int ret = 1;
+ u32 ms;
+
+ if (!timeout)
+ return ret;
+
+ while (*timeout == 0)
+ schedule_timeout_uninterruptible(HZ / 10);
+
+ for (ms = 0; (ret != 0) && ((*timeout == 0) || (ms <= *timeout));
+ ms += HZ / 10) {
+ ret = octeon_mem_access_ok(oct);
+
+ /* wait 100 ms */
+ if (ret)
+ schedule_timeout_uninterruptible(HZ / 10);
+ }
+
+ return ret;
+}
+
+/** Get the octeon id assigned to the octeon device passed as argument.
+ * This function is exported to other modules.
+ * @param dev - octeon device pointer passed as a void *.
+ * @return octeon device id
+ */
+int lio_get_device_id(void *dev)
+{
+ struct octeon_device *octeon_dev = (struct octeon_device *)dev;
+ u32 i;
+
+ for (i = 0; i < MAX_OCTEON_DEVICES; i++)
+ if (octeon_device[i] == octeon_dev)
+ return octeon_dev->octeon_id;
+ return -1;
+}
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file octeon_device.h
+ * \brief Host Driver: This file defines the octeon device structure.
+ */
+
+#ifndef _OCTEON_DEVICE_H_
+#define _OCTEON_DEVICE_H_
+
+/** PCI VendorId Device Id */
+#define OCTEON_CN68XX_PCIID 0x91177d
+#define OCTEON_CN66XX_PCIID 0x92177d
+
+/** Driver identifies chips by these Ids, created by clubbing together
+ * DeviceId+RevisionId; Where Revision Id is not used to distinguish
+ * between chips, a value of 0 is used for revision id.
+ */
+#define OCTEON_CN68XX 0x0091
+#define OCTEON_CN66XX 0x0092
+
+/** Endian-swap modes supported by Octeon. */
+enum octeon_pci_swap_mode {
+ OCTEON_PCI_PASSTHROUGH = 0,
+ OCTEON_PCI_64BIT_SWAP = 1,
+ OCTEON_PCI_32BIT_BYTE_SWAP = 2,
+ OCTEON_PCI_32BIT_LW_SWAP = 3
+};
+
+/*--------------- PCI BAR1 index registers -------------*/
+
+/* BAR1 Mask */
+#define PCI_BAR1_ENABLE_CA 1
+#define PCI_BAR1_ENDIAN_MODE OCTEON_PCI_64BIT_SWAP
+#define PCI_BAR1_ENTRY_VALID 1
+#define PCI_BAR1_MASK ((PCI_BAR1_ENABLE_CA << 3) \
+ | (PCI_BAR1_ENDIAN_MODE << 1) \
+ | PCI_BAR1_ENTRY_VALID)
+
+/** Octeon Device state.
+ * Each octeon device goes through each of these states
+ * as it is initialized.
+ */
+#define OCT_DEV_BEGIN_STATE 0x0
+#define OCT_DEV_PCI_MAP_DONE 0x1
+#define OCT_DEV_DISPATCH_INIT_DONE 0x2
+#define OCT_DEV_INSTR_QUEUE_INIT_DONE 0x3
+#define OCT_DEV_SC_BUFF_POOL_INIT_DONE 0x4
+#define OCT_DEV_RESP_LIST_INIT_DONE 0x5
+#define OCT_DEV_DROQ_INIT_DONE 0x6
+#define OCT_DEV_IO_QUEUES_DONE 0x7
+#define OCT_DEV_CONSOLE_INIT_DONE 0x8
+#define OCT_DEV_HOST_OK 0x9
+#define OCT_DEV_CORE_OK 0xa
+#define OCT_DEV_RUNNING 0xb
+#define OCT_DEV_IN_RESET 0xc
+#define OCT_DEV_STATE_INVALID 0xd
+
+#define OCT_DEV_STATES OCT_DEV_STATE_INVALID
+
+/** Octeon Device interrupts
+ * These interrupt bits are set in int_status filed of
+ * octeon_device structure
+ */
+#define OCT_DEV_INTR_DMA0_FORCE 0x01
+#define OCT_DEV_INTR_DMA1_FORCE 0x02
+#define OCT_DEV_INTR_PKT_DATA 0x04
+
+#define LIO_RESET_SECS (3)
+
+/*---------------------------DISPATCH LIST-------------------------------*/
+
+/** The dispatch list entry.
+ * The driver keeps a record of functions registered for each
+ * response header opcode in this structure. Since the opcode is
+ * hashed to index into the driver's list, more than one opcode
+ * can hash to the same entry, in which case the list field points
+ * to a linked list with the other entries.
+ */
+struct octeon_dispatch {
+ /** List head for this entry */
+ struct list_head list;
+
+ /** The opcode for which the dispatch function & arg should be used */
+ u16 opcode;
+
+ /** The function to be called for a packet received by the driver */
+ octeon_dispatch_fn_t dispatch_fn;
+
+ /* The application specified argument to be passed to the above
+ * function along with the received packet
+ */
+ void *arg;
+};
+
+/** The dispatch list structure. */
+struct octeon_dispatch_list {
+ /** access to dispatch list must be atomic */
+ spinlock_t lock;
+
+ /** Count of dispatch functions currently registered */
+ u32 count;
+
+ /** The list of dispatch functions */
+ struct octeon_dispatch *dlist;
+};
+
+/*----------------------- THE OCTEON DEVICE ---------------------------*/
+
+#define OCT_MEM_REGIONS 3
+/** PCI address space mapping information.
+ * Each of the 3 address spaces given by BAR0, BAR2 and BAR4 of
+ * Octeon gets mapped to different physical address spaces in
+ * the kernel.
+ */
+struct octeon_mmio {
+ /** PCI address to which the BAR is mapped. */
+ u64 start;
+
+ /** Length of this PCI address space. */
+ u32 len;
+
+ /** Length that has been mapped to phys. address space. */
+ u32 mapped_len;
+
+ /** The physical address to which the PCI address space is mapped. */
+ u8 __iomem *hw_addr;
+
+ /** Flag indicating the mapping was successful. */
+ u32 done;
+};
+
+#define MAX_OCTEON_MAPS 32
+
+struct octeon_io_enable {
+ u32 iq;
+ u32 oq;
+ u32 iq64B;
+};
+
+struct octeon_reg_list {
+ u32 __iomem *pci_win_wr_addr_hi;
+ u32 __iomem *pci_win_wr_addr_lo;
+ u64 __iomem *pci_win_wr_addr;
+
+ u32 __iomem *pci_win_rd_addr_hi;
+ u32 __iomem *pci_win_rd_addr_lo;
+ u64 __iomem *pci_win_rd_addr;
+
+ u32 __iomem *pci_win_wr_data_hi;
+ u32 __iomem *pci_win_wr_data_lo;
+ u64 __iomem *pci_win_wr_data;
+
+ u32 __iomem *pci_win_rd_data_hi;
+ u32 __iomem *pci_win_rd_data_lo;
+ u64 __iomem *pci_win_rd_data;
+};
+
+#define OCTEON_CONSOLE_MAX_READ_BYTES 512
+struct octeon_console {
+ u32 active;
+ u32 waiting;
+ u64 addr;
+ u32 buffer_size;
+ u64 input_base_addr;
+ u64 output_base_addr;
+ char leftover[OCTEON_CONSOLE_MAX_READ_BYTES];
+};
+
+struct octeon_board_info {
+ char name[OCT_BOARD_NAME];
+ char serial_number[OCT_SERIAL_LEN];
+ u64 major;
+ u64 minor;
+};
+
+struct octeon_fn_list {
+ void (*setup_iq_regs)(struct octeon_device *, u32);
+ void (*setup_oq_regs)(struct octeon_device *, u32);
+
+ irqreturn_t (*process_interrupt_regs)(void *);
+ int (*soft_reset)(struct octeon_device *);
+ int (*setup_device_regs)(struct octeon_device *);
+ void (*reinit_regs)(struct octeon_device *);
+ void (*bar1_idx_setup)(struct octeon_device *, u64, u32, int);
+ void (*bar1_idx_write)(struct octeon_device *, u32, u32);
+ u32 (*bar1_idx_read)(struct octeon_device *, u32);
+ u32 (*update_iq_read_idx)(struct octeon_device *,
+ struct octeon_instr_queue *);
+
+ void (*enable_oq_pkt_time_intr)(struct octeon_device *, u32);
+ void (*disable_oq_pkt_time_intr)(struct octeon_device *, u32);
+
+ void (*enable_interrupt)(void *);
+ void (*disable_interrupt)(void *);
+
+ void (*enable_io_queues)(struct octeon_device *);
+ void (*disable_io_queues)(struct octeon_device *);
+};
+
+/* Must be multiple of 8, changing breaks ABI */
+#define CVMX_BOOTMEM_NAME_LEN 128
+
+/* Structure for named memory blocks
+ * Number of descriptors
+ * available can be changed without affecting compatiblity,
+ * but name length changes require a bump in the bootmem
+ * descriptor version
+ * Note: This structure must be naturally 64 bit aligned, as a single
+ * memory image will be used by both 32 and 64 bit programs.
+ */
+struct cvmx_bootmem_named_block_desc {
+ /** Base address of named block */
+ u64 base_addr;
+
+ /** Size actually allocated for named block */
+ u64 size;
+
+ /** name of named block */
+ char name[CVMX_BOOTMEM_NAME_LEN];
+};
+
+struct oct_fw_info {
+ u32 max_nic_ports; /** max nic ports for the device */
+ u32 num_gmx_ports; /** num gmx ports */
+ u64 app_cap_flags; /** firmware cap flags */
+
+ /** The core application is running in this mode.
+ * See octeon-drv-opcodes.h for values.
+ */
+ u32 app_mode;
+ char liquidio_firmware_version[32];
+};
+
+/* wrappers around work structs */
+struct cavium_wk {
+ struct delayed_work work;
+ void *ctxptr;
+ size_t ctxul;
+};
+
+struct cavium_wq {
+ struct workqueue_struct *wq;
+ struct cavium_wk wk;
+};
+
+struct octdev_props {
+ /* Each interface in the Octeon device has a network
+ * device pointer (used for OS specific calls).
+ */
+ struct net_device *netdev;
+};
+
+/** The Octeon device.
+ * Each Octeon device has this structure to represent all its
+ * components.
+ */
+struct octeon_device {
+ /** Lock for PCI window configuration accesses */
+ spinlock_t pci_win_lock;
+
+ /** Lock for memory accesses */
+ spinlock_t mem_access_lock;
+
+ /** PCI device pointer */
+ struct pci_dev *pci_dev;
+
+ /** Chip specific information. */
+ void *chip;
+
+ /** Number of interfaces detected in this octeon device. */
+ u32 ifcount;
+
+ struct octdev_props props[MAX_OCTEON_LINKS];
+
+ /** Octeon Chip type. */
+ u16 chip_id;
+ u16 rev_id;
+
+ /** This device's id - set by the driver. */
+ u32 octeon_id;
+
+ /** This device's PCIe port used for traffic. */
+ u16 pcie_port;
+
+ u16 flags;
+#define LIO_FLAG_MSI_ENABLED (u32)(1 << 1)
+#define LIO_FLAG_MSIX_ENABLED (u32)(1 << 2)
+
+ /** The state of this device */
+ atomic_t status;
+
+ /** memory mapped io range */
+ struct octeon_mmio mmio[OCT_MEM_REGIONS];
+
+ struct octeon_reg_list reg_list;
+
+ struct octeon_fn_list fn_list;
+
+ struct octeon_board_info boardinfo;
+
+ u32 num_iqs;
+
+ /* The pool containing pre allocated buffers used for soft commands */
+ struct octeon_sc_buffer_pool sc_buf_pool;
+
+ /** The input instruction queues */
+ struct octeon_instr_queue *instr_queue[MAX_OCTEON_INSTR_QUEUES];
+
+ /** The doubly-linked list of instruction response */
+ struct octeon_response_list response_list[MAX_RESPONSE_LISTS];
+
+ u32 num_oqs;
+
+ /** The DROQ output queues */
+ struct octeon_droq *droq[MAX_OCTEON_OUTPUT_QUEUES];
+
+ struct octeon_io_enable io_qmask;
+
+ /** List of dispatch functions */
+ struct octeon_dispatch_list dispatch;
+
+ /* Interrupt Moderation */
+ struct oct_intrmod_cfg intrmod;
+
+ u32 int_status;
+
+ u64 droq_intr;
+
+ /** Physical location of the cvmx_bootmem_desc_t in octeon memory */
+ u64 bootmem_desc_addr;
+
+ /** Placeholder memory for named blocks.
+ * Assumes single-threaded access
+ */
+ struct cvmx_bootmem_named_block_desc bootmem_named_block_desc;
+
+ /** Address of consoles descriptor */
+ u64 console_desc_addr;
+
+ /** Number of consoles available. 0 means they are inaccessible */
+ u32 num_consoles;
+
+ /* Console caches */
+ struct octeon_console console[MAX_OCTEON_MAPS];
+
+ /* Coprocessor clock rate. */
+ u64 coproc_clock_rate;
+
+ /** The core application is running in this mode. See liquidio_common.h
+ * for values.
+ */
+ u32 app_mode;
+
+ struct oct_fw_info fw_info;
+
+ /** The name given to this device. */
+ char device_name[32];
+
+ /** Application Context */
+ void *app_ctx;
+
+ struct cavium_wq dma_comp_wq;
+
+ struct cavium_wq check_db_wq[MAX_OCTEON_INSTR_QUEUES];
+
+ struct cavium_wk nic_poll_work;
+
+ struct cavium_wk console_poll_work[MAX_OCTEON_MAPS];
+
+ void *priv;
+};
+
+#define OCTEON_CN6XXX(oct) ((oct->chip_id == OCTEON_CN66XX) || \
+ (oct->chip_id == OCTEON_CN68XX))
+#define CHIP_FIELD(oct, TYPE, field) \
+ (((struct octeon_ ## TYPE *)(oct->chip))->field)
+
+struct oct_intrmod_cmd {
+ struct octeon_device *oct_dev;
+ struct octeon_soft_command *sc;
+ struct oct_intrmod_cfg *cfg;
+};
+
+/*------------------ Function Prototypes ----------------------*/
+
+/** Initialize device list memory */
+void octeon_init_device_list(int conf_type);
+
+/** Free memory for Input and Output queue structures for a octeon device */
+void octeon_free_device_mem(struct octeon_device *);
+
+/* Look up a free entry in the octeon_device table and allocate resources
+ * for the octeon_device structure for an octeon device. Called at init
+ * time.
+ */
+struct octeon_device *octeon_allocate_device(u32 pci_id,
+ u32 priv_size);
+
+/** Initialize the driver's dispatch list which is a mix of a hash table
+ * and a linked list. This is done at driver load time.
+ * @param octeon_dev - pointer to the octeon device structure.
+ * @return 0 on success, else -ve error value
+ */
+int octeon_init_dispatch_list(struct octeon_device *octeon_dev);
+
+/** Delete the driver's dispatch list and all registered entries.
+ * This is done at driver unload time.
+ * @param octeon_dev - pointer to the octeon device structure.
+ */
+void octeon_delete_dispatch_list(struct octeon_device *octeon_dev);
+
+/** Initialize the core device fields with the info returned by the FW.
+ * @param recv_info - Receive info structure
+ * @param buf - Receive buffer
+ */
+int octeon_core_drv_init(struct octeon_recv_info *recv_info, void *buf);
+
+/** Gets the dispatch function registered to receive packets with a
+ * given opcode/subcode.
+ * @param octeon_dev - the octeon device pointer.
+ * @param opcode - the opcode for which the dispatch function
+ * is to checked.
+ * @param subcode - the subcode for which the dispatch function
+ * is to checked.
+ *
+ * @return Success: octeon_dispatch_fn_t (dispatch function pointer)
+ * @return Failure: NULL
+ *
+ * Looks up the dispatch list to get the dispatch function for a
+ * given opcode.
+ */
+octeon_dispatch_fn_t
+octeon_get_dispatch(struct octeon_device *octeon_dev, u16 opcode,
+ u16 subcode);
+
+/** Get the octeon device pointer.
+ * @param octeon_id - The id for which the octeon device pointer is required.
+ * @return Success: Octeon device pointer.
+ * @return Failure: NULL.
+ */
+struct octeon_device *lio_get_device(u32 octeon_id);
+
+/** Get the octeon id assigned to the octeon device passed as argument.
+ * This function is exported to other modules.
+ * @param dev - octeon device pointer passed as a void *.
+ * @return octeon device id
+ */
+int lio_get_device_id(void *dev);
+
+static inline u16 OCTEON_MAJOR_REV(struct octeon_device *oct)
+{
+ u16 rev = (oct->rev_id & 0xC) >> 2;
+
+ return (rev == 0) ? 1 : rev;
+}
+
+static inline u16 OCTEON_MINOR_REV(struct octeon_device *oct)
+{
+ return oct->rev_id & 0x3;
+}
+
+/** Read windowed register.
+ * @param oct - pointer to the Octeon device.
+ * @param addr - Address of the register to read.
+ *
+ * This routine is called to read from the indirectly accessed
+ * Octeon registers that are visible through a PCI BAR0 mapped window
+ * register.
+ * @return - 64 bit value read from the register.
+ */
+
+u64 lio_pci_readq(struct octeon_device *oct, u64 addr);
+
+/** Write windowed register.
+ * @param oct - pointer to the Octeon device.
+ * @param val - Value to write
+ * @param addr - Address of the register to write
+ *
+ * This routine is called to write to the indirectly accessed
+ * Octeon registers that are visible through a PCI BAR0 mapped window
+ * register.
+ * @return Nothing.
+ */
+void lio_pci_writeq(struct octeon_device *oct, u64 val, u64 addr);
+
+/* Routines for reading and writing CSRs */
+#define octeon_write_csr(oct_dev, reg_off, value) \
+ writel(value, oct_dev->mmio[0].hw_addr + reg_off)
+
+#define octeon_write_csr64(oct_dev, reg_off, val64) \
+ writeq(val64, oct_dev->mmio[0].hw_addr + reg_off)
+
+#define octeon_read_csr(oct_dev, reg_off) \
+ readl(oct_dev->mmio[0].hw_addr + reg_off)
+
+#define octeon_read_csr64(oct_dev, reg_off) \
+ readq(oct_dev->mmio[0].hw_addr + reg_off)
+
+/**
+ * Checks if memory access is okay
+ *
+ * @param oct which octeon to send to
+ * @return Zero on success, negative on failure.
+ */
+int octeon_mem_access_ok(struct octeon_device *oct);
+
+/**
+ * Waits for DDR initialization.
+ *
+ * @param oct which octeon to send to
+ * @param timeout_in_ms pointer to how long to wait until DDR is initialized
+ * in ms.
+ * If contents are 0, it waits until contents are non-zero
+ * before starting to check.
+ * @return Zero on success, negative on failure.
+ */
+int octeon_wait_for_ddr_init(struct octeon_device *oct,
+ u32 *timeout_in_ms);
+
+/**
+ * Wait for u-boot to boot and be waiting for a command.
+ *
+ * @param wait_time_hundredths
+ * Maximum time to wait
+ *
+ * @return Zero on success, negative on failure.
+ */
+int octeon_wait_for_bootloader(struct octeon_device *oct,
+ u32 wait_time_hundredths);
+
+/**
+ * Initialize console access
+ *
+ * @param oct which octeon initialize
+ * @return Zero on success, negative on failure.
+ */
+int octeon_init_consoles(struct octeon_device *oct);
+
+/**
+ * Adds access to a console to the device.
+ *
+ * @param oct which octeon to add to
+ * @param console_num which console
+ * @return Zero on success, negative on failure.
+ */
+int octeon_add_console(struct octeon_device *oct, u32 console_num);
+
+/** write or read from a console */
+int octeon_console_write(struct octeon_device *oct, u32 console_num,
+ char *buffer, u32 write_request_size, u32 flags);
+int octeon_console_write_avail(struct octeon_device *oct, u32 console_num);
+int octeon_console_read(struct octeon_device *oct, u32 console_num,
+ char *buffer, u32 buf_size, u32 flags);
+int octeon_console_read_avail(struct octeon_device *oct, u32 console_num);
+
+/** Removes all attached consoles. */
+void octeon_remove_consoles(struct octeon_device *oct);
+
+/**
+ * Send a string to u-boot on console 0 as a command.
+ *
+ * @param oct which octeon to send to
+ * @param cmd_str String to send
+ * @param wait_hundredths Time to wait for u-boot to accept the command.
+ *
+ * @return Zero on success, negative on failure.
+ */
+int octeon_console_send_cmd(struct octeon_device *oct, char *cmd_str,
+ u32 wait_hundredths);
+
+/** Parses, validates, and downloads firmware, then boots associated cores.
+ * @param oct which octeon to download firmware to
+ * @param data - The complete firmware file image
+ * @param size - The size of the data
+ *
+ * @return 0 if success.
+ * -EINVAL if file is incompatible or badly formatted.
+ * -ENODEV if no handler was found for the application type or an
+ * invalid octeon id was passed.
+ */
+int octeon_download_firmware(struct octeon_device *oct, const u8 *data,
+ size_t size);
+
+char *lio_get_state_string(atomic_t *state_ptr);
+
+/** Sets up instruction queues for the device
+ * @param oct which octeon to setup
+ *
+ * @return 0 if success. 1 if fails
+ */
+int octeon_setup_instr_queues(struct octeon_device *oct);
+
+/** Sets up output queues for the device
+ * @param oct which octeon to setup
+ *
+ * @return 0 if success. 1 if fails
+ */
+int octeon_setup_output_queues(struct octeon_device *oct);
+
+int octeon_get_tx_qsize(struct octeon_device *oct, u32 q_no);
+
+int octeon_get_rx_qsize(struct octeon_device *oct, u32 q_no);
+
+/** Turns off the input and output queues for the device
+ * @param oct which octeon to disable
+ */
+void octeon_set_io_queues_off(struct octeon_device *oct);
+
+/** Turns on or off the given output queue for the device
+ * @param oct which octeon to change
+ * @param q_no which queue
+ * @param enable 1 to enable, 0 to disable
+ */
+void octeon_set_droq_pkt_op(struct octeon_device *oct, u32 q_no, u32 enable);
+
+/** Retrieve the config for the device
+ * @param oct which octeon
+ * @param card_type type of card
+ *
+ * @returns pointer to configuration
+ */
+void *oct_get_config_info(struct octeon_device *oct, u16 card_type);
+
+/** Gets the octeon device configuration
+ * @return - pointer to the octeon configuration struture
+ */
+struct octeon_config *octeon_get_conf(struct octeon_device *oct);
+
+#endif
--- /dev/null
+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+* Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT. See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+#include "octeon_mem_ops.h"
+
+/* #define CAVIUM_ONLY_PERF_MODE */
+
+#define CVM_MIN(d1, d2) (((d1) < (d2)) ? (d1) : (d2))
+#define CVM_MAX(d1, d2) (((d1) > (d2)) ? (d1) : (d2))
+
+struct niclist {
+ struct list_head list;
+ void *ptr;
+};
+
+struct __dispatch {
+ struct list_head list;
+ struct octeon_recv_info *rinfo;
+ octeon_dispatch_fn_t disp_fn;
+};
+
+/** Get the argument that the user set when registering dispatch
+ * function for a given opcode/subcode.
+ * @param octeon_dev - the octeon device pointer.
+ * @param opcode - the opcode for which the dispatch argument
+ * is to be checked.
+ * @param subcode - the subcode for which the dispatch argument
+ * is to be checked.
+ * @return Success: void * (argument to the dispatch function)
+ * @return Failure: NULL
+ *
+ */
+static inline void *octeon_get_dispatch_arg(struct octeon_device *octeon_dev,
+ u16 opcode, u16 subcode)
+{
+ int idx;
+ struct list_head *dispatch;
+ void *fn_arg = NULL;
+ u16 combined_opcode = OPCODE_SUBCODE(opcode, subcode);
+
+ idx = combined_opcode & OCTEON_OPCODE_MASK;
+
+ spin_lock_bh(&octeon_dev->dispatch.lock);
+
+ if (octeon_dev->dispatch.count == 0) {
+ spin_unlock_bh(&octeon_dev->dispatch.lock);
+ return NULL;
+ }
+
+ if (octeon_dev->dispatch.dlist[idx].opcode == combined_opcode) {
+ fn_arg = octeon_dev->dispatch.dlist[idx].arg;
+ } else {
+ list_for_each(dispatch,
+ &octeon_dev->dispatch.dlist[idx].list) {
+ if (((struct octeon_dispatch *)dispatch)->opcode ==
+ combined_opcode) {
+ fn_arg = ((struct octeon_dispatch *)
+ dispatch)->arg;
+ break;
+ }
+ }
+ }
+
+ spin_unlock_bh(&octeon_dev->dispatch.lock);
+ return fn_arg;
+}
+
+u32 octeon_droq_check_hw_for_pkts(struct octeon_device *oct,
+ struct octeon_droq *droq)
+{
+ u32 pkt_count = 0;
+
+ pkt_count = readl(droq->pkts_sent_reg);
+ if (pkt_count) {
+ atomic_add(pkt_count, &droq->pkts_pending);
+ writel(pkt_count, droq->pkts_sent_reg);
+ }
+
+ return pkt_count;
+}
+
+static void octeon_droq_compute_max_packet_bufs(struct octeon_droq *droq)
+{
+ u32 count = 0;
+
+ /* max_empty_descs is the max. no. of descs that can have no buffers.
+ * If the empty desc count goes beyond this value, we cannot safely
+ * read in a 64K packet sent by Octeon
+ * (64K is max pkt size from Octeon)
+ */
+ droq->max_empty_descs = 0;
+
+ do {
+ droq->max_empty_descs++;
+ count += droq->buffer_size;
+ } while (count < (64 * 1024));
+
+ droq->max_empty_descs = droq->max_count - droq->max_empty_descs;
+}
+
+static void octeon_droq_reset_indices(struct octeon_droq *droq)
+{
+ droq->read_idx = 0;
+ droq->write_idx = 0;
+ droq->refill_idx = 0;
+ droq->refill_count = 0;
+ atomic_set(&droq->pkts_pending, 0);
+}
+
+static void
+octeon_droq_destroy_ring_buffers(struct octeon_device *oct,
+ struct octeon_droq *droq)
+{
+ u32 i;
+
+ for (i = 0; i < droq->max_count; i++) {
+ if (droq->recv_buf_list[i].buffer) {
+ if (droq->desc_ring) {
+ lio_unmap_ring_info(oct->pci_dev,
+ (u64)droq->
+ desc_ring[i].info_ptr,
+ OCT_DROQ_INFO_SIZE);
+ lio_unmap_ring(oct->pci_dev,
+ (u64)droq->desc_ring[i].
+ buffer_ptr,
+ droq->buffer_size);
+ }
+ recv_buffer_free(droq->recv_buf_list[i].buffer);
+ droq->recv_buf_list[i].buffer = NULL;
+ }
+ }
+
+ octeon_droq_reset_indices(droq);
+}
+
+static int
+octeon_droq_setup_ring_buffers(struct octeon_device *oct,
+ struct octeon_droq *droq)
+{
+ u32 i;
+ void *buf;
+ struct octeon_droq_desc *desc_ring = droq->desc_ring;
+
+ for (i = 0; i < droq->max_count; i++) {
+ buf = recv_buffer_alloc(oct, droq->q_no, droq->buffer_size);
+
+ if (!buf) {
+ dev_err(&oct->pci_dev->dev, "%s buffer alloc failed\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ droq->recv_buf_list[i].buffer = buf;
+ droq->recv_buf_list[i].data = get_rbd(buf);
+
+ droq->info_list[i].length = 0;
+
+ /* map ring buffers into memory */
+ desc_ring[i].info_ptr = lio_map_ring_info(droq, i);
+ desc_ring[i].buffer_ptr =
+ lio_map_ring(oct->pci_dev,
+ droq->recv_buf_list[i].buffer,
+ droq->buffer_size);
+ }
+
+ octeon_droq_reset_indices(droq);
+
+ octeon_droq_compute_max_packet_bufs(droq);
+
+ return 0;
+}
+
+int octeon_delete_droq(struct octeon_device *oct, u32 q_no)
+{
+ struct octeon_droq *droq = oct->droq[q_no];
+
+ dev_dbg(&oct->pci_dev->dev, "%s[%d]\n", __func__, q_no);
+
+ octeon_droq_destroy_ring_buffers(oct, droq);
+
+ if (droq->recv_buf_list)
+ vfree(droq->recv_buf_list);
+
+ if (droq->info_base_addr)
+ cnnic_free_aligned_dma(oct->pci_dev, droq->info_list,
+ droq->info_alloc_size,
+ droq->info_base_addr,
+ droq->info_list_dma);
+
+ if (droq->desc_ring)
+ lio_dma_free(oct, (droq->max_count * OCT_DROQ_DESC_SIZE),
+ droq->desc_ring, droq->desc_ring_dma);
+
+ memset(droq, 0, OCT_DROQ_SIZE);
+
+ return 0;
+}
+
+int octeon_init_droq(struct octeon_device *oct,
+ u32 q_no,
+ u32 num_descs,
+ u32 desc_size,
+ void *app_ctx)
+{
+ struct octeon_droq *droq;
+ u32 desc_ring_size = 0, c_num_descs = 0, c_buf_size = 0;
+ u32 c_pkts_per_intr = 0, c_refill_threshold = 0;
+
+ dev_dbg(&oct->pci_dev->dev, "%s[%d]\n", __func__, q_no);
+
+ droq = oct->droq[q_no];
+ memset(droq, 0, OCT_DROQ_SIZE);
+
+ droq->oct_dev = oct;
+ droq->q_no = q_no;
+ if (app_ctx)
+ droq->app_ctx = app_ctx;
+ else
+ droq->app_ctx = (void *)(size_t)q_no;
+
+ c_num_descs = num_descs;
+ c_buf_size = desc_size;
+ if (OCTEON_CN6XXX(oct)) {
+ struct octeon_config *conf6x = CHIP_FIELD(oct, cn6xxx, conf);
+
+ c_pkts_per_intr = (u32)CFG_GET_OQ_PKTS_PER_INTR(conf6x);
+ c_refill_threshold = (u32)CFG_GET_OQ_REFILL_THRESHOLD(conf6x);
+ }
+
+ droq->max_count = c_num_descs;
+ droq->buffer_size = c_buf_size;
+
+ desc_ring_size = droq->max_count * OCT_DROQ_DESC_SIZE;
+ droq->desc_ring = lio_dma_alloc(oct, desc_ring_size,
+ (dma_addr_t *)&droq->desc_ring_dma);
+
+ if (!droq->desc_ring) {
+ dev_err(&oct->pci_dev->dev,
+ "Output queue %d ring alloc failed\n", q_no);
+ return 1;
+ }
+
+ dev_dbg(&oct->pci_dev->dev, "droq[%d]: desc_ring: virt: 0x%p, dma: %lx\n",
+ q_no, droq->desc_ring, droq->desc_ring_dma);
+ dev_dbg(&oct->pci_dev->dev, "droq[%d]: num_desc: %d\n", q_no,
+ droq->max_count);
+
+ droq->info_list =
+ cnnic_alloc_aligned_dma(oct->pci_dev,
+ (droq->max_count * OCT_DROQ_INFO_SIZE),
+ &droq->info_alloc_size,
+ &droq->info_base_addr,
+ &droq->info_list_dma);
+
+ if (!droq->info_list) {
+ dev_err(&oct->pci_dev->dev, "Cannot allocate memory for info list.\n");
+ lio_dma_free(oct, (droq->max_count * OCT_DROQ_DESC_SIZE),
+ droq->desc_ring, droq->desc_ring_dma);
+ return 1;
+ }
+
+ droq->recv_buf_list = (struct octeon_recv_buffer *)
+ vmalloc(droq->max_count *
+ OCT_DROQ_RECVBUF_SIZE);
+ if (!droq->recv_buf_list) {
+ dev_err(&oct->pci_dev->dev, "Output queue recv buf list alloc failed\n");
+ goto init_droq_fail;
+ }
+
+ if (octeon_droq_setup_ring_buffers(oct, droq))
+ goto init_droq_fail;
+
+ droq->pkts_per_intr = c_pkts_per_intr;
+ droq->refill_threshold = c_refill_threshold;
+
+ dev_dbg(&oct->pci_dev->dev, "DROQ INIT: max_empty_descs: %d\n",
+ droq->max_empty_descs);
+
+ spin_lock_init(&droq->lock);
+
+ INIT_LIST_HEAD(&droq->dispatch_list);
+
+ /* For 56xx Pass1, this function won't be called, so no checks. */
+ oct->fn_list.setup_oq_regs(oct, q_no);
+
+ oct->io_qmask.oq |= (1 << q_no);
+
+ return 0;
+
+init_droq_fail:
+ octeon_delete_droq(oct, q_no);
+ return 1;
+}
+
+/* octeon_create_recv_info
+ * Parameters:
+ * octeon_dev - pointer to the octeon device structure
+ * droq - droq in which the packet arrived.
+ * buf_cnt - no. of buffers used by the packet.
+ * idx - index in the descriptor for the first buffer in the packet.
+ * Description:
+ * Allocates a recv_info_t and copies the buffer addresses for packet data
+ * into the recv_pkt space which starts at an 8B offset from recv_info_t.
+ * Flags the descriptors for refill later. If available descriptors go
+ * below the threshold to receive a 64K pkt, new buffers are first allocated
+ * before the recv_pkt_t is created.
+ * This routine will be called in interrupt context.
+ * Returns:
+ * Success: Pointer to recv_info_t
+ * Failure: NULL.
+ * Locks:
+ * The droq->lock is held when this routine is called.
+ */
+static inline struct octeon_recv_info *octeon_create_recv_info(
+ struct octeon_device *octeon_dev,
+ struct octeon_droq *droq,
+ u32 buf_cnt,
+ u32 idx)
+{
+ struct octeon_droq_info *info;
+ struct octeon_recv_pkt *recv_pkt;
+ struct octeon_recv_info *recv_info;
+ u32 i, bytes_left;
+
+ info = &droq->info_list[idx];
+
+ recv_info = octeon_alloc_recv_info(sizeof(struct __dispatch));
+ if (!recv_info)
+ return NULL;
+
+ recv_pkt = recv_info->recv_pkt;
+ recv_pkt->rh = info->rh;
+ recv_pkt->length = (u32)info->length;
+ recv_pkt->buffer_count = (u16)buf_cnt;
+ recv_pkt->octeon_id = (u16)octeon_dev->octeon_id;
+
+ i = 0;
+ bytes_left = (u32)info->length;
+
+ while (buf_cnt) {
+ lio_unmap_ring(octeon_dev->pci_dev,
+ (u64)droq->desc_ring[idx].buffer_ptr,
+ droq->buffer_size);
+
+ recv_pkt->buffer_size[i] =
+ (bytes_left >=
+ droq->buffer_size) ? droq->buffer_size : bytes_left;
+
+ recv_pkt->buffer_ptr[i] = droq->recv_buf_list[idx].buffer;
+ droq->recv_buf_list[idx].buffer = NULL;
+
+ INCR_INDEX_BY1(idx, droq->max_count);
+ bytes_left -= droq->buffer_size;
+ i++;
+ buf_cnt--;
+ }
+
+ return recv_info;
+}
+
+/* If we were not able to refill all buffers, try to move around
+ * the buffers that were not dispatched.
+ */
+static inline u32
+octeon_droq_refill_pullup_descs(struct octeon_droq *droq,
+ struct octeon_droq_desc *desc_ring)
+{
+ u32 desc_refilled = 0;
+
+ u32 refill_index = droq->refill_idx;
+
+ while (refill_index != droq->read_idx) {
+ if (droq->recv_buf_list[refill_index].buffer) {
+ droq->recv_buf_list[droq->refill_idx].buffer =
+ droq->recv_buf_list[refill_index].buffer;
+ droq->recv_buf_list[droq->refill_idx].data =
+ droq->recv_buf_list[refill_index].data;
+ desc_ring[droq->refill_idx].buffer_ptr =
+ desc_ring[refill_index].buffer_ptr;
+ droq->recv_buf_list[refill_index].buffer = NULL;
+ desc_ring[refill_index].buffer_ptr = 0;
+ do {
+ INCR_INDEX_BY1(droq->refill_idx,
+ droq->max_count);
+ desc_refilled++;
+ droq->refill_count--;
+ } while (droq->recv_buf_list[droq->refill_idx].
+ buffer);
+ }
+ INCR_INDEX_BY1(refill_index, droq->max_count);
+ } /* while */
+ return desc_refilled;
+}
+
+/* octeon_droq_refill
+ * Parameters:
+ * droq - droq in which descriptors require new buffers.
+ * Description:
+ * Called during normal DROQ processing in interrupt mode or by the poll
+ * thread to refill the descriptors from which buffers were dispatched
+ * to upper layers. Attempts to allocate new buffers. If that fails, moves
+ * up buffers (that were not dispatched) to form a contiguous ring.
+ * Returns:
+ * No of descriptors refilled.
+ * Locks:
+ * This routine is called with droq->lock held.
+ */
+static u32
+octeon_droq_refill(struct octeon_device *octeon_dev, struct octeon_droq *droq)
+{
+ struct octeon_droq_desc *desc_ring;
+ void *buf = NULL;
+ u8 *data;
+ u32 desc_refilled = 0;
+
+ desc_ring = droq->desc_ring;
+
+ while (droq->refill_count && (desc_refilled < droq->max_count)) {
+ /* If a valid buffer exists (happens if there is no dispatch),
+ * reuse
+ * the buffer, else allocate.
+ */
+ if (!droq->recv_buf_list[droq->refill_idx].buffer) {
+ buf = recv_buffer_alloc(octeon_dev, droq->q_no,
+ droq->buffer_size);
+ /* If a buffer could not be allocated, no point in
+ * continuing
+ */
+ if (!buf)
+ break;
+ droq->recv_buf_list[droq->refill_idx].buffer =
+ buf;
+ data = get_rbd(buf);
+ } else {
+ data = get_rbd(droq->recv_buf_list
+ [droq->refill_idx].buffer);
+ }
+
+ droq->recv_buf_list[droq->refill_idx].data = data;
+
+ desc_ring[droq->refill_idx].buffer_ptr =
+ lio_map_ring(octeon_dev->pci_dev,
+ droq->recv_buf_list[droq->
+ refill_idx].buffer,
+ droq->buffer_size);
+
+ /* Reset any previous values in the length field. */
+ droq->info_list[droq->refill_idx].length = 0;
+
+ INCR_INDEX_BY1(droq->refill_idx, droq->max_count);
+ desc_refilled++;
+ droq->refill_count--;
+ }
+
+ if (droq->refill_count)
+ desc_refilled +=
+ octeon_droq_refill_pullup_descs(droq, desc_ring);
+
+ /* if droq->refill_count
+ * The refill count would not change in pass two. We only moved buffers
+ * to close the gap in the ring, but we would still have the same no. of
+ * buffers to refill.
+ */
+ return desc_refilled;
+}
+
+static inline u32
+octeon_droq_get_bufcount(u32 buf_size, u32 total_len)
+{
+ u32 buf_cnt = 0;
+
+ while (total_len > (buf_size * buf_cnt))
+ buf_cnt++;
+ return buf_cnt;
+}
+
+static int
+octeon_droq_dispatch_pkt(struct octeon_device *oct,
+ struct octeon_droq *droq,
+ union octeon_rh *rh,
+ struct octeon_droq_info *info)
+{
+ u32 cnt;
+ octeon_dispatch_fn_t disp_fn;
+ struct octeon_recv_info *rinfo;
+
+ cnt = octeon_droq_get_bufcount(droq->buffer_size, (u32)info->length);
+
+ disp_fn = octeon_get_dispatch(oct, (u16)rh->r.opcode,
+ (u16)rh->r.subcode);
+ if (disp_fn) {
+ rinfo = octeon_create_recv_info(oct, droq, cnt, droq->read_idx);
+ if (rinfo) {
+ struct __dispatch *rdisp = rinfo->rsvd;
+
+ rdisp->rinfo = rinfo;
+ rdisp->disp_fn = disp_fn;
+ rinfo->recv_pkt->rh = *rh;
+ list_add_tail(&rdisp->list,
+ &droq->dispatch_list);
+ } else {
+ droq->stats.dropped_nomem++;
+ }
+ } else {
+ dev_err(&oct->pci_dev->dev, "DROQ: No dispatch function\n");
+ droq->stats.dropped_nodispatch++;
+ } /* else (dispatch_fn ... */
+
+ return cnt;
+}
+
+static inline void octeon_droq_drop_packets(struct octeon_device *oct,
+ struct octeon_droq *droq,
+ u32 cnt)
+{
+ u32 i = 0, buf_cnt;
+ struct octeon_droq_info *info;
+
+ for (i = 0; i < cnt; i++) {
+ info = &droq->info_list[droq->read_idx];
+ octeon_swap_8B_data((u64 *)info, 2);
+
+ if (info->length) {
+ info->length -= OCT_RH_SIZE;
+ droq->stats.bytes_received += info->length;
+ buf_cnt = octeon_droq_get_bufcount(droq->buffer_size,
+ (u32)info->length);
+ } else {
+ dev_err(&oct->pci_dev->dev, "DROQ: In drop: pkt with len 0\n");
+ buf_cnt = 1;
+ }
+
+ INCR_INDEX(droq->read_idx, buf_cnt, droq->max_count);
+ droq->refill_count += buf_cnt;
+ }
+}
+
+static u32
+octeon_droq_fast_process_packets(struct octeon_device *oct,
+ struct octeon_droq *droq,
+ u32 pkts_to_process)
+{
+ struct octeon_droq_info *info;
+ union octeon_rh *rh;
+ u32 pkt, total_len = 0, pkt_count;
+
+ pkt_count = pkts_to_process;
+
+ for (pkt = 0; pkt < pkt_count; pkt++) {
+ u32 pkt_len = 0;
+ struct sk_buff *nicbuf = NULL;
+
+ info = &droq->info_list[droq->read_idx];
+ octeon_swap_8B_data((u64 *)info, 2);
+
+ if (!info->length) {
+ dev_err(&oct->pci_dev->dev,
+ "DROQ[%d] idx: %d len:0, pkt_cnt: %d\n",
+ droq->q_no, droq->read_idx, pkt_count);
+ print_hex_dump_bytes("", DUMP_PREFIX_ADDRESS,
+ (u8 *)info,
+ OCT_DROQ_INFO_SIZE);
+ break;
+ }
+
+ /* Len of resp hdr in included in the received data len. */
+ info->length -= OCT_RH_SIZE;
+ rh = &info->rh;
+
+ total_len += (u32)info->length;
+
+ if (OPCODE_SLOW_PATH(rh)) {
+ u32 buf_cnt;
+
+ buf_cnt = octeon_droq_dispatch_pkt(oct, droq, rh, info);
+ INCR_INDEX(droq->read_idx, buf_cnt, droq->max_count);
+ droq->refill_count += buf_cnt;
+ } else {
+ if (info->length <= droq->buffer_size) {
+ lio_unmap_ring(oct->pci_dev,
+ (u64)droq->desc_ring[
+ droq->read_idx].buffer_ptr,
+ droq->buffer_size);
+ pkt_len = (u32)info->length;
+ nicbuf = droq->recv_buf_list[
+ droq->read_idx].buffer;
+ droq->recv_buf_list[droq->read_idx].buffer =
+ NULL;
+ INCR_INDEX_BY1(droq->read_idx, droq->max_count);
+ skb_put(nicbuf, pkt_len);
+ droq->refill_count++;
+ } else {
+ nicbuf = octeon_fast_packet_alloc(oct, droq,
+ droq->q_no,
+ (u32)
+ info->length);
+ pkt_len = 0;
+ /* nicbuf allocation can fail. We'll handle it
+ * inside the loop.
+ */
+ while (pkt_len < info->length) {
+ int cpy_len;
+
+ cpy_len = ((pkt_len +
+ droq->buffer_size) >
+ info->length) ?
+ ((u32)info->length - pkt_len) :
+ droq->buffer_size;
+
+ if (nicbuf) {
+ lio_unmap_ring(oct->pci_dev,
+ (u64)
+ droq->desc_ring
+ [droq->read_idx].
+ buffer_ptr,
+ droq->
+ buffer_size);
+ octeon_fast_packet_next(droq,
+ nicbuf,
+ cpy_len,
+ droq->
+ read_idx
+ );
+ }
+
+ pkt_len += cpy_len;
+ INCR_INDEX_BY1(droq->read_idx,
+ droq->max_count);
+ droq->refill_count++;
+ }
+ }
+
+ if (nicbuf) {
+ if (droq->ops.fptr)
+ droq->ops.fptr(oct->octeon_id,
+ nicbuf, pkt_len,
+ rh, &droq->napi);
+ else
+ recv_buffer_free(nicbuf);
+ }
+ }
+
+ if (droq->refill_count >= droq->refill_threshold) {
+ int desc_refilled = octeon_droq_refill(oct, droq);
+
+ /* Flush the droq descriptor data to memory to be sure
+ * that when we update the credits the data in memory
+ * is accurate.
+ */
+ wmb();
+ writel((desc_refilled), droq->pkts_credit_reg);
+ /* make sure mmio write completes */
+ mmiowb();
+ }
+
+ } /* for ( each packet )... */
+
+ /* Increment refill_count by the number of buffers processed. */
+ droq->stats.pkts_received += pkt;
+ droq->stats.bytes_received += total_len;
+
+ if ((droq->ops.drop_on_max) && (pkts_to_process - pkt)) {
+ octeon_droq_drop_packets(oct, droq, (pkts_to_process - pkt));
+
+ droq->stats.dropped_toomany += (pkts_to_process - pkt);
+ return pkts_to_process;
+ }
+
+ return pkt;
+}
+
+int
+octeon_droq_process_packets(struct octeon_device *oct,
+ struct octeon_droq *droq,
+ u32 budget)
+{
+ u32 pkt_count = 0, pkts_processed = 0;
+ struct list_head *tmp, *tmp2;
+
+ pkt_count = atomic_read(&droq->pkts_pending);
+ if (!pkt_count)
+ return 0;
+
+ if (pkt_count > budget)
+ pkt_count = budget;
+
+ /* Grab the lock */
+ spin_lock(&droq->lock);
+
+ pkts_processed = octeon_droq_fast_process_packets(oct, droq, pkt_count);
+
+ atomic_sub(pkts_processed, &droq->pkts_pending);
+
+ /* Release the spin lock */
+ spin_unlock(&droq->lock);
+
+ list_for_each_safe(tmp, tmp2, &droq->dispatch_list) {
+ struct __dispatch *rdisp = (struct __dispatch *)tmp;
+
+ list_del(tmp);
+ rdisp->disp_fn(rdisp->rinfo,
+ octeon_get_dispatch_arg
+ (oct,
+ (u16)rdisp->rinfo->recv_pkt->rh.r.opcode,
+ (u16)rdisp->rinfo->recv_pkt->rh.r.subcode));
+ }
+
+ /* If there are packets pending. schedule tasklet again */
+ if (atomic_read(&droq->pkts_pending))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * Utility function to poll for packets. check_hw_for_packets must be
+ * called before calling this routine.
+ */
+
+static int
+octeon_droq_process_poll_pkts(struct octeon_device *oct,
+ struct octeon_droq *droq, u32 budget)
+{
+ struct list_head *tmp, *tmp2;
+ u32 pkts_available = 0, pkts_processed = 0;
+ u32 total_pkts_processed = 0;
+
+ if (budget > droq->max_count)
+ budget = droq->max_count;
+
+ spin_lock(&droq->lock);
+
+ while (total_pkts_processed < budget) {
+ pkts_available =
+ CVM_MIN((budget - total_pkts_processed),
+ (u32)(atomic_read(&droq->pkts_pending)));
+
+ if (pkts_available == 0)
+ break;
+
+ pkts_processed =
+ octeon_droq_fast_process_packets(oct, droq,
+ pkts_available);
+
+ atomic_sub(pkts_processed, &droq->pkts_pending);
+
+ total_pkts_processed += pkts_processed;
+
+ octeon_droq_check_hw_for_pkts(oct, droq);
+ }
+
+ spin_unlock(&droq->lock);
+
+ list_for_each_safe(tmp, tmp2, &droq->dispatch_list) {
+ struct __dispatch *rdisp = (struct __dispatch *)tmp;
+
+ list_del(tmp);
+ rdisp->disp_fn(rdisp->rinfo,
+ octeon_get_dispatch_arg
+ (oct,
+ (u16)rdisp->rinfo->recv_pkt->rh.r.opcode,
+ (u16)rdisp->rinfo->recv_pkt->rh.r.subcode));
+ }
+
+ return total_pkts_processed;
+}
+
+int
+octeon_process_droq_poll_cmd(struct octeon_device *oct, u32 q_no, int cmd,
+ u32 arg)
+{
+ struct octeon_droq *droq;
+ struct octeon_config *oct_cfg = NULL;
+
+ oct_cfg = octeon_get_conf(oct);
+
+ if (!oct_cfg)
+ return -EINVAL;
+
+ if (q_no >= CFG_GET_OQ_MAX_Q(oct_cfg)) {
+ dev_err(&oct->pci_dev->dev, "%s: droq id (%d) exceeds MAX (%d)\n",
+ __func__, q_no, (oct->num_oqs - 1));
+ return -EINVAL;
+ }
+
+ droq = oct->droq[q_no];
+
+ if (cmd == POLL_EVENT_PROCESS_PKTS)
+ return octeon_droq_process_poll_pkts(oct, droq, arg);
+
+ if (cmd == POLL_EVENT_PENDING_PKTS) {
+ u32 pkt_cnt = atomic_read(&droq->pkts_pending);
+
+ return octeon_droq_process_packets(oct, droq, pkt_cnt);
+ }
+
+ if (cmd == POLL_EVENT_ENABLE_INTR) {
+ u32 value;
+ unsigned long flags;
+
+ /* Enable Pkt Interrupt */
+ switch (oct->chip_id) {
+ case OCTEON_CN66XX:
+ case OCTEON_CN68XX: {
+ struct octeon_cn6xxx *cn6xxx =
+ (struct octeon_cn6xxx *)oct->chip;
+ spin_lock_irqsave
+ (&cn6xxx->lock_for_droq_int_enb_reg, flags);
+ value =
+ octeon_read_csr(oct,
+ CN6XXX_SLI_PKT_TIME_INT_ENB);
+ value |= (1 << q_no);
+ octeon_write_csr(oct,
+ CN6XXX_SLI_PKT_TIME_INT_ENB,
+ value);
+ value =
+ octeon_read_csr(oct,
+ CN6XXX_SLI_PKT_CNT_INT_ENB);
+ value |= (1 << q_no);
+ octeon_write_csr(oct,
+ CN6XXX_SLI_PKT_CNT_INT_ENB,
+ value);
+
+ /* don't bother flushing the enables */
+
+ spin_unlock_irqrestore
+ (&cn6xxx->lock_for_droq_int_enb_reg, flags);
+ return 0;
+ }
+ break;
+ }
+
+ return 0;
+ }
+
+ dev_err(&oct->pci_dev->dev, "%s Unknown command: %d\n", __func__, cmd);
+ return -EINVAL;
+}
+
+int octeon_register_droq_ops(struct octeon_device *oct, u32 q_no,
+ struct octeon_droq_ops *ops)
+{
+ struct octeon_droq *droq;
+ unsigned long flags;
+ struct octeon_config *oct_cfg = NULL;
+
+ oct_cfg = octeon_get_conf(oct);
+
+ if (!oct_cfg)
+ return -EINVAL;
+
+ if (!(ops)) {
+ dev_err(&oct->pci_dev->dev, "%s: droq_ops pointer is NULL\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (q_no >= CFG_GET_OQ_MAX_Q(oct_cfg)) {
+ dev_err(&oct->pci_dev->dev, "%s: droq id (%d) exceeds MAX (%d)\n",
+ __func__, q_no, (oct->num_oqs - 1));
+ return -EINVAL;
+ }
+
+ droq = oct->droq[q_no];
+
+ spin_lock_irqsave(&droq->lock, flags);
+
+ memcpy(&droq->ops, ops, sizeof(struct octeon_droq_ops));
+
+ spin_unlock_irqrestore(&droq->lock, flags);
+
+ return 0;
+}
+
+int octeon_unregister_droq_ops(struct octeon_device *oct, u32 q_no)
+{
+ unsigned long flags;
+ struct octeon_droq *droq;
+ struct octeon_config *oct_cfg = NULL;
+
+ oct_cfg = octeon_get_conf(oct);
+
+ if (!oct_cfg)
+ return -EINVAL;
+
+ if (q_no >= CFG_GET_OQ_MAX_Q(oct_cfg)) {
+ dev_err(&oct->pci_dev->dev, "%s: droq id (%d) exceeds MAX (%d)\n",
+ __func__, q_no, oct->num_oqs - 1);
+ return -EINVAL;
+ }
+
+ droq = oct->droq[q_no];
+
+ if (!droq) {
+ dev_info(&oct->pci_dev->dev,
+ "Droq id (%d) not available.\n", q_no);
+ return 0;
+ }
+
+ spin_lock_irqsave(&droq->lock, flags);
+
+ droq->ops.fptr = NULL;
+ droq->ops.drop_on_max = 0;
+
+ spin_unlock_irqrestore(&droq->lock, flags);
+
+ return 0;
+}
+
+int octeon_create_droq(struct octeon_device *oct,
+ u32 q_no, u32 num_descs,
+ u32 desc_size, void *app_ctx)
+{
+ struct octeon_droq *droq;
+
+ if (oct->droq[q_no]) {
+ dev_dbg(&oct->pci_dev->dev, "Droq already in use. Cannot create droq %d again\n",
+ q_no);
+ return 1;
+ }
+
+ /* Allocate the DS for the new droq. */
+ droq = vmalloc(sizeof(*droq));
+ if (!droq)
+ goto create_droq_fail;
+ memset(droq, 0, sizeof(struct octeon_droq));
+
+ /*Disable the pkt o/p for this Q */
+ octeon_set_droq_pkt_op(oct, q_no, 0);
+ oct->droq[q_no] = droq;
+
+ /* Initialize the Droq */
+ octeon_init_droq(oct, q_no, num_descs, desc_size, app_ctx);
+
+ oct->num_oqs++;
+
+ dev_dbg(&oct->pci_dev->dev, "%s: Total number of OQ: %d\n", __func__,
+ oct->num_oqs);
+
+ /* Global Droq register settings */
+
+ /* As of now not required, as setting are done for all 32 Droqs at
+ * the same time.
+ */
+ return 0;
+
+create_droq_fail:
+ octeon_delete_droq(oct, q_no);
+ return -1;
+}
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*! \file octeon_droq.h
+ * \brief Implementation of Octeon Output queues. "Output" is with
+ * respect to the Octeon device on the NIC. From this driver's point of
+ * view they are ingress queues.
+ */
+
+#ifndef __OCTEON_DROQ_H__
+#define __OCTEON_DROQ_H__
+
+/* Default number of packets that will be processed in one iteration. */
+#define MAX_PACKET_BUDGET 0xFFFFFFFF
+
+/** Octeon descriptor format.
+ * The descriptor ring is made of descriptors which have 2 64-bit values:
+ * -# Physical (bus) address of the data buffer.
+ * -# Physical (bus) address of a octeon_droq_info structure.
+ * The Octeon device DMA's incoming packets and its information at the address
+ * given by these descriptor fields.
+ */
+struct octeon_droq_desc {
+ /** The buffer pointer */
+ u64 buffer_ptr;
+
+ /** The Info pointer */
+ u64 info_ptr;
+};
+
+#define OCT_DROQ_DESC_SIZE (sizeof(struct octeon_droq_desc))
+
+/** Information about packet DMA'ed by Octeon.
+ * The format of the information available at Info Pointer after Octeon
+ * has posted a packet. Not all descriptors have valid information. Only
+ * the Info field of the first descriptor for a packet has information
+ * about the packet.
+ */
+struct octeon_droq_info {
+ /** The Output Receive Header. */
+ union octeon_rh rh;
+
+ /** The Length of the packet. */
+ u64 length;
+};
+
+#define OCT_DROQ_INFO_SIZE (sizeof(struct octeon_droq_info))
+
+/** Pointer to data buffer.
+ * Driver keeps a pointer to the data buffer that it made available to
+ * the Octeon device. Since the descriptor ring keeps physical (bus)
+ * addresses, this field is required for the driver to keep track of
+ * the virtual address pointers.
+*/
+struct octeon_recv_buffer {
+ /** Packet buffer, including metadata. */
+ void *buffer;
+
+ /** Data in the packet buffer. */
+ u8 *data;
+};
+
+#define OCT_DROQ_RECVBUF_SIZE (sizeof(struct octeon_recv_buffer))
+
+/** Output Queue statistics. Each output queue has four stats fields. */
+struct oct_droq_stats {
+ /** Number of packets received in this queue. */
+ u64 pkts_received;
+
+ /** Bytes received by this queue. */
+ u64 bytes_received;
+
+ /** Packets dropped due to no dispatch function. */
+ u64 dropped_nodispatch;
+
+ /** Packets dropped due to no memory available. */
+ u64 dropped_nomem;
+
+ /** Packets dropped due to large number of pkts to process. */
+ u64 dropped_toomany;
+
+ /** Number of packets sent to stack from this queue. */
+ u64 rx_pkts_received;
+
+ /** Number of Bytes sent to stack from this queue. */
+ u64 rx_bytes_received;
+
+ /** Num of Packets dropped due to receive path failures. */
+ u64 rx_dropped;
+};
+
+#define POLL_EVENT_INTR_ARRIVED 1
+#define POLL_EVENT_PROCESS_PKTS 2
+#define POLL_EVENT_PENDING_PKTS 3
+#define POLL_EVENT_ENABLE_INTR 4
+
+/* The maximum number of buffers that can be dispatched from the
+ * output/dma queue. Set to 64 assuming 1K buffers in DROQ and the fact that
+ * max packet size from DROQ is 64K.
+ */
+#define MAX_RECV_BUFS 64
+
+/** Receive Packet format used when dispatching output queue packets
+ * with non-raw opcodes.
+ * The received packet will be sent to the upper layers using this
+ * structure which is passed as a parameter to the dispatch function
+ */
+struct octeon_recv_pkt {
+ /** Number of buffers in this received packet */
+ u16 buffer_count;
+
+ /** Id of the device that is sending the packet up */
+ u16 octeon_id;
+
+ /** Length of data in the packet buffer */
+ u32 length;
+
+ /** The receive header */
+ union octeon_rh rh;
+
+ /** Pointer to the OS-specific packet buffer */
+ void *buffer_ptr[MAX_RECV_BUFS];
+
+ /** Size of the buffers pointed to by ptr's in buffer_ptr */
+ u32 buffer_size[MAX_RECV_BUFS];
+};
+
+#define OCT_RECV_PKT_SIZE (sizeof(struct octeon_recv_pkt))
+
+/** The first parameter of a dispatch function.
+ * For a raw mode opcode, the driver dispatches with the device
+ * pointer in this structure.
+ * For non-raw mode opcode, the driver dispatches the recv_pkt
+ * created to contain the buffers with data received from Octeon.
+ * ---------------------
+ * | *recv_pkt ----|---
+ * |-------------------| |
+ * | 0 or more bytes | |
+ * | reserved by driver| |
+ * |-------------------|<-/
+ * | octeon_recv_pkt |
+ * | |
+ * |___________________|
+ */
+struct octeon_recv_info {
+ void *rsvd;
+ struct octeon_recv_pkt *recv_pkt;
+};
+
+#define OCT_RECV_INFO_SIZE (sizeof(struct octeon_recv_info))
+
+/** Allocate a recv_info structure. The recv_pkt pointer in the recv_info
+ * structure is filled in before this call returns.
+ * @param extra_bytes - extra bytes to be allocated at the end of the recv info
+ * structure.
+ * @return - pointer to a newly allocated recv_info structure.
+ */
+static inline struct octeon_recv_info *octeon_alloc_recv_info(int extra_bytes)
+{
+ struct octeon_recv_info *recv_info;
+ u8 *buf;
+
+ buf = kmalloc(OCT_RECV_PKT_SIZE + OCT_RECV_INFO_SIZE +
+ extra_bytes, GFP_ATOMIC);
+ if (!buf)
+ return NULL;
+
+ recv_info = (struct octeon_recv_info *)buf;
+ recv_info->recv_pkt =
+ (struct octeon_recv_pkt *)(buf + OCT_RECV_INFO_SIZE);
+ recv_info->rsvd = NULL;
+ if (extra_bytes)
+ recv_info->rsvd = buf + OCT_RECV_INFO_SIZE + OCT_RECV_PKT_SIZE;
+
+ return recv_info;
+}
+
+/** Free a recv_info structure.
+ * @param recv_info - Pointer to receive_info to be freed
+ */
+static inline void octeon_free_recv_info(struct octeon_recv_info *recv_info)
+{
+ kfree(recv_info);
+}
+
+typedef int (*octeon_dispatch_fn_t)(struct octeon_recv_info *, void *);
+
+/** Used by NIC module to register packet handler and to get device
+ * information for each octeon device.
+ */
+struct octeon_droq_ops {
+ /** This registered function will be called by the driver with
+ * the octeon id, pointer to buffer from droq and length of
+ * data in the buffer. The receive header gives the port
+ * number to the caller. Function pointer is set by caller.
+ */
+ void (*fptr)(u32, void *, u32, union octeon_rh *, void *);
+
+ /* This function will be called by the driver for all NAPI related
+ * events. The first param is the octeon id. The second param is the
+ * output queue number. The third is the NAPI event that occurred.
+ */
+ void (*napi_fn)(void *);
+
+ u32 poll_mode;
+
+ /** Flag indicating if the DROQ handler should drop packets that
+ * it cannot handle in one iteration. Set by caller.
+ */
+ u32 drop_on_max;
+};
+
+/** The Descriptor Ring Output Queue structure.
+ * This structure has all the information required to implement a
+ * Octeon DROQ.
+ */
+struct octeon_droq {
+ /** A spinlock to protect access to this ring. */
+ spinlock_t lock;
+
+ u32 q_no;
+
+ struct octeon_droq_ops ops;
+
+ struct octeon_device *oct_dev;
+
+ /** The 8B aligned descriptor ring starts at this address. */
+ struct octeon_droq_desc *desc_ring;
+
+ /** Index in the ring where the driver should read the next packet */
+ u32 read_idx;
+
+ /** Index in the ring where Octeon will write the next packet */
+ u32 write_idx;
+
+ /** Index in the ring where the driver will refill the descriptor's
+ * buffer
+ */
+ u32 refill_idx;
+
+ /** Packets pending to be processed */
+ atomic_t pkts_pending;
+
+ /** Number of descriptors in this ring. */
+ u32 max_count;
+
+ /** The number of descriptors pending refill. */
+ u32 refill_count;
+
+ u32 pkts_per_intr;
+ u32 refill_threshold;
+
+ /** The max number of descriptors in DROQ without a buffer.
+ * This field is used to keep track of empty space threshold. If the
+ * refill_count reaches this value, the DROQ cannot accept a max-sized
+ * (64K) packet.
+ */
+ u32 max_empty_descs;
+
+ /** The 8B aligned info ptrs begin from this address. */
+ struct octeon_droq_info *info_list;
+
+ /** The receive buffer list. This list has the virtual addresses of the
+ * buffers.
+ */
+ struct octeon_recv_buffer *recv_buf_list;
+
+ /** The size of each buffer pointed by the buffer pointer. */
+ u32 buffer_size;
+
+ /** Pointer to the mapped packet credit register.
+ * Host writes number of info/buffer ptrs available to this register
+ */
+ void __iomem *pkts_credit_reg;
+
+ /** Pointer to the mapped packet sent register.
+ * Octeon writes the number of packets DMA'ed to host memory
+ * in this register.
+ */
+ void __iomem *pkts_sent_reg;
+
+ struct list_head dispatch_list;
+
+ /** Statistics for this DROQ. */
+ struct oct_droq_stats stats;
+
+ /** DMA mapped address of the DROQ descriptor ring. */
+ size_t desc_ring_dma;
+
+ /** Info ptr list are allocated at this virtual address. */
+ size_t info_base_addr;
+
+ /** DMA mapped address of the info list */
+ size_t info_list_dma;
+
+ /** Allocated size of info list. */
+ u32 info_alloc_size;
+
+ /** application context */
+ void *app_ctx;
+
+ struct napi_struct napi;
+
+ u32 cpu_id;
+
+ struct call_single_data csd;
+};
+
+#define OCT_DROQ_SIZE (sizeof(struct octeon_droq))
+
+/**
+ * Allocates space for the descriptor ring for the droq and sets the
+ * base addr, num desc etc in Octeon registers.
+ *
+ * @param oct_dev - pointer to the octeon device structure
+ * @param q_no - droq no. ranges from 0 - 3.
+ * @param app_ctx - pointer to application context
+ * @return Success: 0 Failure: 1
+*/
+int octeon_init_droq(struct octeon_device *oct_dev,
+ u32 q_no,
+ u32 num_descs,
+ u32 desc_size,
+ void *app_ctx);
+
+/**
+ * Frees the space for descriptor ring for the droq.
+ *
+ * @param oct_dev - pointer to the octeon device structure
+ * @param q_no - droq no. ranges from 0 - 3.
+ * @return: Success: 0 Failure: 1
+*/
+int octeon_delete_droq(struct octeon_device *oct_dev, u32 q_no);
+
+/** Register a change in droq operations. The ops field has a pointer to a
+ * function which will called by the DROQ handler for all packets arriving
+ * on output queues given by q_no irrespective of the type of packet.
+ * The ops field also has a flag which if set tells the DROQ handler to
+ * drop packets if it receives more than what it can process in one
+ * invocation of the handler.
+ * @param oct - octeon device
+ * @param q_no - octeon output queue number (0 <= q_no <= MAX_OCTEON_DROQ-1
+ * @param ops - the droq_ops settings for this queue
+ * @return - 0 on success, -ENODEV or -EINVAL on error.
+ */
+int
+octeon_register_droq_ops(struct octeon_device *oct,
+ u32 q_no,
+ struct octeon_droq_ops *ops);
+
+/** Resets the function pointer and flag settings made by
+ * octeon_register_droq_ops(). After this routine is called, the DROQ handler
+ * will lookup dispatch function for each arriving packet on the output queue
+ * given by q_no.
+ * @param oct - octeon device
+ * @param q_no - octeon output queue number (0 <= q_no <= MAX_OCTEON_DROQ-1
+ * @return - 0 on success, -ENODEV or -EINVAL on error.
+ */
+int octeon_unregister_droq_ops(struct octeon_device *oct, u32 q_no);
+
+/** Register a dispatch function for a opcode/subcode. The driver will call
+ * this dispatch function when it receives a packet with the given
+ * opcode/subcode in its output queues along with the user specified
+ * argument.
+ * @param oct - the octeon device to register with.
+ * @param opcode - the opcode for which the dispatch will be registered.
+ * @param subcode - the subcode for which the dispatch will be registered
+ * @param fn - the dispatch function.
+ * @param fn_arg - user specified that will be passed along with the
+ * dispatch function by the driver.
+ * @return Success: 0; Failure: 1
+ */
+int octeon_register_dispatch_fn(struct octeon_device *oct,
+ u16 opcode,
+ u16 subcode,
+ octeon_dispatch_fn_t fn, void *fn_arg);
+
+/** Remove registration for an opcode/subcode. This will delete the mapping for
+ * an opcode/subcode. The dispatch function will be unregistered and will no
+ * longer be called if a packet with the opcode/subcode arrives in the driver
+ * output queues.
+ * @param oct - the octeon device to unregister from.
+ * @param opcode - the opcode to be unregistered.
+ * @param subcode - the subcode to be unregistered.
+ *
+ * @return Success: 0; Failure: 1
+ */
+int octeon_unregister_dispatch_fn(struct octeon_device *oct,
+ u16 opcode,
+ u16 subcode);
+
+void octeon_droq_print_stats(void);
+
+u32 octeon_droq_check_hw_for_pkts(struct octeon_device *oct,
+ struct octeon_droq *droq);
+
+int octeon_create_droq(struct octeon_device *oct, u32 q_no,
+ u32 num_descs, u32 desc_size, void *app_ctx);
+
+int octeon_droq_process_packets(struct octeon_device *oct,
+ struct octeon_droq *droq,
+ u32 budget);
+
+int octeon_process_droq_poll_cmd(struct octeon_device *oct, u32 q_no,
+ int cmd, u32 arg);
+
+#endif /*__OCTEON_DROQ_H__ */
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*! \file octeon_iq.h
+ * \brief Host Driver: Implementation of Octeon input queues. "Input" is
+ * with respect to the Octeon device on the NIC. From this driver's
+ * point of view they are egress queues.
+ */
+
+#ifndef __OCTEON_IQ_H__
+#define __OCTEON_IQ_H__
+
+#define IQ_STATUS_RUNNING 1
+
+#define IQ_SEND_OK 0
+#define IQ_SEND_STOP 1
+#define IQ_SEND_FAILED -1
+
+/*------------------------- INSTRUCTION QUEUE --------------------------*/
+
+/* \cond */
+
+#define REQTYPE_NONE 0
+#define REQTYPE_NORESP_NET 1
+#define REQTYPE_NORESP_NET_SG 2
+#define REQTYPE_RESP_NET 3
+#define REQTYPE_RESP_NET_SG 4
+#define REQTYPE_SOFT_COMMAND 5
+#define REQTYPE_LAST 5
+
+struct octeon_request_list {
+ u32 reqtype;
+ void *buf;
+};
+
+/* \endcond */
+
+/** Input Queue statistics. Each input queue has four stats fields. */
+struct oct_iq_stats {
+ u64 instr_posted; /**< Instructions posted to this queue. */
+ u64 instr_processed; /**< Instructions processed in this queue. */
+ u64 instr_dropped; /**< Instructions that could not be processed */
+ u64 bytes_sent; /**< Bytes sent through this queue. */
+ u64 sgentry_sent;/**< Gather entries sent through this queue. */
+ u64 tx_done;/**< Num of packets sent to network. */
+ u64 tx_iq_busy;/**< Numof times this iq was found to be full. */
+ u64 tx_dropped;/**< Numof pkts dropped dueto xmitpath errors. */
+ u64 tx_tot_bytes;/**< Total count of bytes sento to network. */
+};
+
+#define OCT_IQ_STATS_SIZE (sizeof(struct oct_iq_stats))
+
+/** The instruction (input) queue.
+ * The input queue is used to post raw (instruction) mode data or packet
+ * data to Octeon device from the host. Each input queue (upto 4) for
+ * a Octeon device has one such structure to represent it.
+*/
+struct octeon_instr_queue {
+ /** A spinlock to protect access to the input ring. */
+ spinlock_t lock;
+
+ /** Flag that indicates if the queue uses 64 byte commands. */
+ u32 iqcmd_64B:1;
+
+ /** Queue Number. */
+ u32 iq_no:5;
+
+ u32 rsvd:17;
+
+ /* Controls the periodic flushing of iq */
+ u32 do_auto_flush:1;
+
+ u32 status:8;
+
+ /** Maximum no. of instructions in this queue. */
+ u32 max_count;
+
+ /** Index in input ring where the driver should write the next packet */
+ u32 host_write_index;
+
+ /** Index in input ring where Octeon is expected to read the next
+ * packet.
+ */
+ u32 octeon_read_index;
+
+ /** This index aids in finding the window in the queue where Octeon
+ * has read the commands.
+ */
+ u32 flush_index;
+
+ /** This field keeps track of the instructions pending in this queue. */
+ atomic_t instr_pending;
+
+ u32 reset_instr_cnt;
+
+ /** Pointer to the Virtual Base addr of the input ring. */
+ u8 *base_addr;
+
+ struct octeon_request_list *request_list;
+
+ /** Octeon doorbell register for the ring. */
+ void __iomem *doorbell_reg;
+
+ /** Octeon instruction count register for this ring. */
+ void __iomem *inst_cnt_reg;
+
+ /** Number of instructions pending to be posted to Octeon. */
+ u32 fill_cnt;
+
+ /** The max. number of instructions that can be held pending by the
+ * driver.
+ */
+ u32 fill_threshold;
+
+ /** The last time that the doorbell was rung. */
+ u64 last_db_time;
+
+ /** The doorbell timeout. If the doorbell was not rung for this time and
+ * fill_cnt is non-zero, ring the doorbell again.
+ */
+ u32 db_timeout;
+
+ /** Statistics for this input queue. */
+ struct oct_iq_stats stats;
+
+ /** DMA mapped base address of the input descriptor ring. */
+ u64 base_addr_dma;
+
+ /** Application context */
+ void *app_ctx;
+};
+
+/*---------------------- INSTRUCTION FORMAT ----------------------------*/
+
+/** 32-byte instruction format.
+ * Format of instruction for a 32-byte mode input queue.
+ */
+struct octeon_instr_32B {
+ /** Pointer where the input data is available. */
+ u64 dptr;
+
+ /** Instruction Header. */
+ u64 ih;
+
+ /** Pointer where the response for a RAW mode packet will be written
+ * by Octeon.
+ */
+ u64 rptr;
+
+ /** Input Request Header. Additional info about the input. */
+ u64 irh;
+
+};
+
+#define OCT_32B_INSTR_SIZE (sizeof(struct octeon_instr_32B))
+
+/** 64-byte instruction format.
+ * Format of instruction for a 64-byte mode input queue.
+ */
+struct octeon_instr_64B {
+ /** Pointer where the input data is available. */
+ u64 dptr;
+
+ /** Instruction Header. */
+ u64 ih;
+
+ /** Input Request Header. */
+ u64 irh;
+
+ /** opcode/subcode specific parameters */
+ u64 ossp[2];
+
+ /** Return Data Parameters */
+ u64 rdp;
+
+ /** Pointer where the response for a RAW mode packet will be written
+ * by Octeon.
+ */
+ u64 rptr;
+
+ u64 reserved;
+
+};
+
+#define OCT_64B_INSTR_SIZE (sizeof(struct octeon_instr_64B))
+
+/** The size of each buffer in soft command buffer pool
+ */
+#define SOFT_COMMAND_BUFFER_SIZE 1024
+
+struct octeon_soft_command {
+ /** Soft command buffer info. */
+ struct list_head node;
+ u64 dma_addr;
+ u32 size;
+
+ /** Command and return status */
+ struct octeon_instr_64B cmd;
+#define COMPLETION_WORD_INIT 0xffffffffffffffffULL
+ u64 *status_word;
+
+ /** Data buffer info */
+ void *virtdptr;
+ u64 dmadptr;
+ u32 datasize;
+
+ /** Return buffer info */
+ void *virtrptr;
+ u64 dmarptr;
+ u32 rdatasize;
+
+ /** Context buffer info */
+ void *ctxptr;
+ u32 ctxsize;
+
+ /** Time out and callback */
+ size_t wait_time;
+ size_t timeout;
+ u32 iq_no;
+ void (*callback)(struct octeon_device *, u32, void *);
+ void *callback_arg;
+};
+
+/** Maximum number of buffers to allocate into soft command buffer pool
+ */
+#define MAX_SOFT_COMMAND_BUFFERS 16
+
+/** Head of a soft command buffer pool.
+ */
+struct octeon_sc_buffer_pool {
+ /** List structure to add delete pending entries to */
+ struct list_head head;
+
+ /** A lock for this response list */
+ spinlock_t lock;
+
+ atomic_t alloc_buf_count;
+};
+
+int octeon_setup_sc_buffer_pool(struct octeon_device *oct);
+int octeon_free_sc_buffer_pool(struct octeon_device *oct);
+struct octeon_soft_command *
+ octeon_alloc_soft_command(struct octeon_device *oct,
+ u32 datasize, u32 rdatasize,
+ u32 ctxsize);
+void octeon_free_soft_command(struct octeon_device *oct,
+ struct octeon_soft_command *sc);
+
+/**
+ * octeon_init_instr_queue()
+ * @param octeon_dev - pointer to the octeon device structure.
+ * @param iq_no - queue to be initialized (0 <= q_no <= 3).
+ *
+ * Called at driver init time for each input queue. iq_conf has the
+ * configuration parameters for the queue.
+ *
+ * @return Success: 0 Failure: 1
+ */
+int octeon_init_instr_queue(struct octeon_device *octeon_dev, u32 iq_no,
+ u32 num_descs);
+
+/**
+ * octeon_delete_instr_queue()
+ * @param octeon_dev - pointer to the octeon device structure.
+ * @param iq_no - queue to be deleted (0 <= q_no <= 3).
+ *
+ * Called at driver unload time for each input queue. Deletes all
+ * allocated resources for the input queue.
+ *
+ * @return Success: 0 Failure: 1
+ */
+int octeon_delete_instr_queue(struct octeon_device *octeon_dev, u32 iq_no);
+
+int lio_wait_for_instr_fetch(struct octeon_device *oct);
+
+int
+octeon_register_reqtype_free_fn(struct octeon_device *oct, int reqtype,
+ void (*fn)(void *));
+
+int
+lio_process_iq_request_list(struct octeon_device *oct,
+ struct octeon_instr_queue *iq);
+
+int octeon_send_command(struct octeon_device *oct, u32 iq_no,
+ u32 force_db, void *cmd, void *buf,
+ u32 datasize, u32 reqtype);
+
+void octeon_prepare_soft_command(struct octeon_device *oct,
+ struct octeon_soft_command *sc,
+ u8 opcode, u8 subcode,
+ u32 irh_ossp, u64 ossp0,
+ u64 ossp1);
+
+int octeon_send_soft_command(struct octeon_device *oct,
+ struct octeon_soft_command *sc);
+
+int octeon_setup_iq(struct octeon_device *oct, u32 iq_no,
+ u32 num_descs, void *app_ctx);
+
+#endif /* __OCTEON_IQ_H__ */
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*! \file octeon_main.h
+ * \brief Host Driver: This file is included by all host driver source files
+ * to include common definitions.
+ */
+
+#ifndef _OCTEON_MAIN_H_
+#define _OCTEON_MAIN_H_
+
+#if BITS_PER_LONG == 32
+#define CVM_CAST64(v) ((long long)(v))
+#elif BITS_PER_LONG == 64
+#define CVM_CAST64(v) ((long long)(long)(v))
+#else
+#error "Unknown system architecture"
+#endif
+
+#define DRV_NAME "LiquidIO"
+
+/**
+ * \brief determines if a given console has debug enabled.
+ * @param console console to check
+ * @returns 1 = enabled. 0 otherwise
+ */
+int octeon_console_debug_enabled(u32 console);
+
+/* BQL-related functions */
+void octeon_report_sent_bytes_to_bql(void *buf, int reqtype);
+void octeon_update_tx_completion_counters(void *buf, int reqtype,
+ unsigned int *pkts_compl,
+ unsigned int *bytes_compl);
+void octeon_report_tx_completion_to_bql(void *txq, unsigned int pkts_compl,
+ unsigned int bytes_compl);
+
+/** Swap 8B blocks */
+static inline void octeon_swap_8B_data(u64 *data, u32 blocks)
+{
+ while (blocks) {
+ cpu_to_be64s(data);
+ blocks--;
+ data++;
+ }
+}
+
+/**
+ * \brief unmaps a PCI BAR
+ * @param oct Pointer to Octeon device
+ * @param baridx bar index
+ */
+static inline void octeon_unmap_pci_barx(struct octeon_device *oct, int baridx)
+{
+ dev_dbg(&oct->pci_dev->dev, "Freeing PCI mapped regions for Bar%d\n",
+ baridx);
+
+ if (oct->mmio[baridx].done)
+ iounmap(oct->mmio[baridx].hw_addr);
+
+ if (oct->mmio[baridx].start)
+ pci_release_region(oct->pci_dev, baridx * 2);
+}
+
+/**
+ * \brief maps a PCI BAR
+ * @param oct Pointer to Octeon device
+ * @param baridx bar index
+ * @param max_map_len maximum length of mapped memory
+ */
+static inline int octeon_map_pci_barx(struct octeon_device *oct,
+ int baridx, int max_map_len)
+{
+ u32 mapped_len = 0;
+
+ if (pci_request_region(oct->pci_dev, baridx * 2, DRV_NAME)) {
+ dev_err(&oct->pci_dev->dev, "pci_request_region failed for bar %d\n",
+ baridx);
+ return 1;
+ }
+
+ oct->mmio[baridx].start = pci_resource_start(oct->pci_dev, baridx * 2);
+ oct->mmio[baridx].len = pci_resource_len(oct->pci_dev, baridx * 2);
+
+ mapped_len = oct->mmio[baridx].len;
+ if (!mapped_len)
+ return 1;
+
+ if (max_map_len && (mapped_len > max_map_len))
+ mapped_len = max_map_len;
+
+ oct->mmio[baridx].hw_addr =
+ ioremap(oct->mmio[baridx].start, mapped_len);
+ oct->mmio[baridx].mapped_len = mapped_len;
+
+ dev_dbg(&oct->pci_dev->dev, "BAR%d start: 0x%llx mapped %u of %u bytes\n",
+ baridx, oct->mmio[baridx].start, mapped_len,
+ oct->mmio[baridx].len);
+
+ if (!oct->mmio[baridx].hw_addr) {
+ dev_err(&oct->pci_dev->dev, "error ioremap for bar %d\n",
+ baridx);
+ return 1;
+ }
+ oct->mmio[baridx].done = 1;
+
+ return 0;
+}
+
+static inline void *
+cnnic_alloc_aligned_dma(struct pci_dev *pci_dev,
+ u32 size,
+ u32 *alloc_size,
+ size_t *orig_ptr,
+ size_t *dma_addr __attribute__((unused)))
+{
+ int retries = 0;
+ void *ptr = NULL;
+
+#define OCTEON_MAX_ALLOC_RETRIES 1
+ do {
+ ptr =
+ (void *)__get_free_pages(GFP_KERNEL,
+ get_order(size));
+ if ((unsigned long)ptr & 0x07) {
+ free_pages((unsigned long)ptr, get_order(size));
+ ptr = NULL;
+ /* Increment the size required if the first
+ * attempt failed.
+ */
+ if (!retries)
+ size += 7;
+ }
+ retries++;
+ } while ((retries <= OCTEON_MAX_ALLOC_RETRIES) && !ptr);
+
+ *alloc_size = size;
+ *orig_ptr = (unsigned long)ptr;
+ if ((unsigned long)ptr & 0x07)
+ ptr = (void *)(((unsigned long)ptr + 7) & ~(7UL));
+ return ptr;
+}
+
+#define cnnic_free_aligned_dma(pci_dev, ptr, size, orig_ptr, dma_addr) \
+ free_pages(orig_ptr, get_order(size))
+
+static inline void
+sleep_cond(wait_queue_head_t *wait_queue, int *condition)
+{
+ wait_queue_t we;
+
+ init_waitqueue_entry(&we, current);
+ add_wait_queue(wait_queue, &we);
+ while (!(ACCESS_ONCE(*condition))) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (signal_pending(current))
+ goto out;
+ schedule();
+ }
+out:
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(wait_queue, &we);
+}
+
+static inline void
+sleep_atomic_cond(wait_queue_head_t *waitq, atomic_t *pcond)
+{
+ wait_queue_t we;
+
+ init_waitqueue_entry(&we, current);
+ add_wait_queue(waitq, &we);
+ while (!atomic_read(pcond)) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (signal_pending(current))
+ goto out;
+ schedule();
+ }
+out:
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(waitq, &we);
+}
+
+/* Gives up the CPU for a timeout period.
+ * Check that the condition is not true before we go to sleep for a
+ * timeout period.
+ */
+static inline void
+sleep_timeout_cond(wait_queue_head_t *wait_queue,
+ int *condition,
+ int timeout)
+{
+ wait_queue_t we;
+
+ init_waitqueue_entry(&we, current);
+ add_wait_queue(wait_queue, &we);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (!(*condition))
+ schedule_timeout(timeout);
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(wait_queue, &we);
+}
+
+#ifndef ROUNDUP4
+#define ROUNDUP4(val) (((val) + 3) & 0xfffffffc)
+#endif
+
+#ifndef ROUNDUP8
+#define ROUNDUP8(val) (((val) + 7) & 0xfffffff8)
+#endif
+
+#ifndef ROUNDUP16
+#define ROUNDUP16(val) (((val) + 15) & 0xfffffff0)
+#endif
+
+#ifndef ROUNDUP128
+#define ROUNDUP128(val) (((val) + 127) & 0xffffff80)
+#endif
+
+#endif /* _OCTEON_MAIN_H_ */
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+#include "octeon_mem_ops.h"
+
+#define MEMOPS_IDX MAX_BAR1_MAP_INDEX
+
+static inline void
+octeon_toggle_bar1_swapmode(struct octeon_device *oct __attribute__((unused)),
+ u32 idx __attribute__((unused)))
+{
+#ifdef __BIG_ENDIAN_BITFIELD
+ u32 mask;
+
+ mask = oct->fn_list.bar1_idx_read(oct, idx);
+ mask = (mask & 0x2) ? (mask & ~2) : (mask | 2);
+ oct->fn_list.bar1_idx_write(oct, idx, mask);
+#endif
+}
+
+static void
+octeon_pci_fastwrite(struct octeon_device *oct, u8 __iomem *mapped_addr,
+ u8 *hostbuf, u32 len)
+{
+ while ((len) && ((unsigned long)mapped_addr) & 7) {
+ writeb(*(hostbuf++), mapped_addr++);
+ len--;
+ }
+
+ octeon_toggle_bar1_swapmode(oct, MEMOPS_IDX);
+
+ while (len >= 8) {
+ writeq(*((u64 *)hostbuf), mapped_addr);
+ mapped_addr += 8;
+ hostbuf += 8;
+ len -= 8;
+ }
+
+ octeon_toggle_bar1_swapmode(oct, MEMOPS_IDX);
+
+ while (len--)
+ writeb(*(hostbuf++), mapped_addr++);
+}
+
+static void
+octeon_pci_fastread(struct octeon_device *oct, u8 __iomem *mapped_addr,
+ u8 *hostbuf, u32 len)
+{
+ while ((len) && ((unsigned long)mapped_addr) & 7) {
+ *(hostbuf++) = readb(mapped_addr++);
+ len--;
+ }
+
+ octeon_toggle_bar1_swapmode(oct, MEMOPS_IDX);
+
+ while (len >= 8) {
+ *((u64 *)hostbuf) = readq(mapped_addr);
+ mapped_addr += 8;
+ hostbuf += 8;
+ len -= 8;
+ }
+
+ octeon_toggle_bar1_swapmode(oct, MEMOPS_IDX);
+
+ while (len--)
+ *(hostbuf++) = readb(mapped_addr++);
+}
+
+/* Core mem read/write with temporary bar1 settings. */
+/* op = 1 to read, op = 0 to write. */
+static void
+__octeon_pci_rw_core_mem(struct octeon_device *oct, u64 addr,
+ u8 *hostbuf, u32 len, u32 op)
+{
+ u32 copy_len = 0, index_reg_val = 0;
+ unsigned long flags;
+ u8 __iomem *mapped_addr;
+
+ spin_lock_irqsave(&oct->mem_access_lock, flags);
+
+ /* Save the original index reg value. */
+ index_reg_val = oct->fn_list.bar1_idx_read(oct, MEMOPS_IDX);
+ do {
+ oct->fn_list.bar1_idx_setup(oct, addr, MEMOPS_IDX, 1);
+ mapped_addr = oct->mmio[1].hw_addr
+ + (MEMOPS_IDX << 22) + (addr & 0x3fffff);
+
+ /* If operation crosses a 4MB boundary, split the transfer
+ * at the 4MB
+ * boundary.
+ */
+ if (((addr + len - 1) & ~(0x3fffff)) != (addr & ~(0x3fffff))) {
+ copy_len = (u32)(((addr & ~(0x3fffff)) +
+ (MEMOPS_IDX << 22)) - addr);
+ } else {
+ copy_len = len;
+ }
+
+ if (op) { /* read from core */
+ octeon_pci_fastread(oct, mapped_addr, hostbuf,
+ copy_len);
+ } else {
+ octeon_pci_fastwrite(oct, mapped_addr, hostbuf,
+ copy_len);
+ }
+
+ len -= copy_len;
+ addr += copy_len;
+ hostbuf += copy_len;
+
+ } while (len);
+
+ oct->fn_list.bar1_idx_write(oct, MEMOPS_IDX, index_reg_val);
+
+ spin_unlock_irqrestore(&oct->mem_access_lock, flags);
+}
+
+void
+octeon_pci_read_core_mem(struct octeon_device *oct,
+ u64 coreaddr,
+ u8 *buf,
+ u32 len)
+{
+ __octeon_pci_rw_core_mem(oct, coreaddr, buf, len, 1);
+}
+
+void
+octeon_pci_write_core_mem(struct octeon_device *oct,
+ u64 coreaddr,
+ u8 *buf,
+ u32 len)
+{
+ __octeon_pci_rw_core_mem(oct, coreaddr, buf, len, 0);
+}
+
+u64 octeon_read_device_mem64(struct octeon_device *oct, u64 coreaddr)
+{
+ u64 ret;
+
+ __octeon_pci_rw_core_mem(oct, coreaddr, (u8 *)&ret, 8, 1);
+
+ return be64_to_cpu(ret);
+}
+
+u32 octeon_read_device_mem32(struct octeon_device *oct, u64 coreaddr)
+{
+ u32 ret;
+
+ __octeon_pci_rw_core_mem(oct, coreaddr, (u8 *)&ret, 4, 1);
+
+ return be32_to_cpu(ret);
+}
+
+void octeon_write_device_mem32(struct octeon_device *oct, u64 coreaddr,
+ u32 val)
+{
+ u32 t = cpu_to_be32(val);
+
+ __octeon_pci_rw_core_mem(oct, coreaddr, (u8 *)&t, 4, 0);
+}
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*! \file octeon_mem_ops.h
+ * \brief Host Driver: Routines used to read/write Octeon memory.
+ */
+
+#ifndef __OCTEON_MEM_OPS_H__
+#define __OCTEON_MEM_OPS_H__
+
+/** Read a 64-bit value from a BAR1 mapped core memory address.
+ * @param oct - pointer to the octeon device.
+ * @param core_addr - the address to read from.
+ *
+ * The range_idx gives the BAR1 index register for the range of address
+ * in which core_addr is mapped.
+ *
+ * @return 64-bit value read from Core memory
+ */
+u64 octeon_read_device_mem64(struct octeon_device *oct, u64 core_addr);
+
+/** Read a 32-bit value from a BAR1 mapped core memory address.
+ * @param oct - pointer to the octeon device.
+ * @param core_addr - the address to read from.
+ *
+ * @return 32-bit value read from Core memory
+ */
+u32 octeon_read_device_mem32(struct octeon_device *oct, u64 core_addr);
+
+/** Write a 32-bit value to a BAR1 mapped core memory address.
+ * @param oct - pointer to the octeon device.
+ * @param core_addr - the address to write to.
+ * @param val - 32-bit value to write.
+ */
+void
+octeon_write_device_mem32(struct octeon_device *oct,
+ u64 core_addr,
+ u32 val);
+
+/** Read multiple bytes from Octeon memory.
+ */
+void
+octeon_pci_read_core_mem(struct octeon_device *oct,
+ u64 coreaddr,
+ u8 *buf,
+ u32 len);
+
+/** Write multiple bytes into Octeon memory.
+ */
+void
+octeon_pci_write_core_mem(struct octeon_device *oct,
+ u64 coreaddr,
+ u8 *buf,
+ u32 len);
+
+#endif
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*! \file octeon_network.h
+ * \brief Host NIC Driver: Structure and Macro definitions used by NIC Module.
+ */
+
+#ifndef __OCTEON_NETWORK_H__
+#define __OCTEON_NETWORK_H__
+#include <linux/version.h>
+#include <linux/dma-mapping.h>
+#include <linux/ptp_clock_kernel.h>
+
+/** LiquidIO per-interface network private data */
+struct lio {
+ /** State of the interface. Rx/Tx happens only in the RUNNING state. */
+ atomic_t ifstate;
+
+ /** Octeon Interface index number. This device will be represented as
+ * oct<ifidx> in the system.
+ */
+ int ifidx;
+
+ /** Octeon Input queue to use to transmit for this network interface. */
+ int txq;
+
+ /** Octeon Output queue from which pkts arrive
+ * for this network interface.
+ */
+ int rxq;
+
+ /** Guards the glist */
+ spinlock_t lock;
+
+ /** Linked list of gather components */
+ struct list_head glist;
+
+ /** Pointer to the NIC properties for the Octeon device this network
+ * interface is associated with.
+ */
+ struct octdev_props *octprops;
+
+ /** Pointer to the octeon device structure. */
+ struct octeon_device *oct_dev;
+
+ struct net_device *netdev;
+
+ /** Link information sent by the core application for this interface. */
+ struct oct_link_info linfo;
+
+ /** Size of Tx queue for this octeon device. */
+ u32 tx_qsize;
+
+ /** Size of Rx queue for this octeon device. */
+ u32 rx_qsize;
+
+ /** Size of MTU this octeon device. */
+ u32 mtu;
+
+ /** msg level flag per interface. */
+ u32 msg_enable;
+
+ /** Copy of Interface capabilities: TSO, TSO6, LRO, Chescksums . */
+ u64 dev_capability;
+
+ /** Copy of beacaon reg in phy */
+ u32 phy_beacon_val;
+
+ /** Copy of ctrl reg in phy */
+ u32 led_ctrl_val;
+
+ /* PTP clock information */
+ struct ptp_clock_info ptp_info;
+ struct ptp_clock *ptp_clock;
+ s64 ptp_adjust;
+
+ /* for atomic access to Octeon PTP reg and data struct */
+ spinlock_t ptp_lock;
+
+ /* Interface info */
+ u32 intf_open;
+
+ /* work queue for txq status */
+ struct cavium_wq txq_status_wq;
+
+};
+
+#define LIO_SIZE (sizeof(struct lio))
+#define GET_LIO(netdev) ((struct lio *)netdev_priv(netdev))
+
+/**
+ * \brief Enable or disable feature
+ * @param netdev pointer to network device
+ * @param cmd Command that just requires acknowledgment
+ */
+int liquidio_set_feature(struct net_device *netdev, int cmd);
+
+/**
+ * \brief Link control command completion callback
+ * @param nctrl_ptr pointer to control packet structure
+ *
+ * This routine is called by the callback function when a ctrl pkt sent to
+ * core app completes. The nctrl_ptr contains a copy of the command type
+ * and data sent to the core app. This routine is only called if the ctrl
+ * pkt was sent successfully to the core app.
+ */
+void liquidio_link_ctrl_cmd_completion(void *nctrl_ptr);
+
+/**
+ * \brief Register ethtool operations
+ * @param netdev pointer to network device
+ */
+void liquidio_set_ethtool_ops(struct net_device *netdev);
+
+static inline void
+*recv_buffer_alloc(struct octeon_device *oct __attribute__((unused)),
+ u32 q_no __attribute__((unused)), u32 size)
+{
+#define SKB_ADJ_MASK 0x3F
+#define SKB_ADJ (SKB_ADJ_MASK + 1)
+
+ struct sk_buff *skb = dev_alloc_skb(size + SKB_ADJ);
+
+ if ((unsigned long)skb->data & SKB_ADJ_MASK) {
+ u32 r = SKB_ADJ - ((unsigned long)skb->data & SKB_ADJ_MASK);
+
+ skb_reserve(skb, r);
+ }
+
+ return (void *)skb;
+}
+
+static inline void recv_buffer_free(void *buffer)
+{
+ dev_kfree_skb_any((struct sk_buff *)buffer);
+}
+
+#define lio_dma_alloc(oct, size, dma_addr) \
+ dma_alloc_coherent(&oct->pci_dev->dev, size, dma_addr, GFP_KERNEL)
+#define lio_dma_free(oct, size, virt_addr, dma_addr) \
+ dma_free_coherent(&oct->pci_dev->dev, size, virt_addr, dma_addr)
+
+#define get_rbd(ptr) (((struct sk_buff *)(ptr))->data)
+
+static inline u64
+lio_map_ring_info(struct octeon_droq *droq, u32 i)
+{
+ dma_addr_t dma_addr;
+ struct octeon_device *oct = droq->oct_dev;
+
+ dma_addr = dma_map_single(&oct->pci_dev->dev, &droq->info_list[i],
+ OCT_DROQ_INFO_SIZE, DMA_FROM_DEVICE);
+
+ BUG_ON(dma_mapping_error(&oct->pci_dev->dev, dma_addr));
+
+ return (u64)dma_addr;
+}
+
+static inline void
+lio_unmap_ring_info(struct pci_dev *pci_dev,
+ u64 info_ptr, u32 size)
+{
+ dma_unmap_single(&pci_dev->dev, info_ptr, size, DMA_FROM_DEVICE);
+}
+
+static inline u64
+lio_map_ring(struct pci_dev *pci_dev,
+ void *buf, u32 size)
+{
+ dma_addr_t dma_addr;
+
+ dma_addr = dma_map_single(&pci_dev->dev, get_rbd(buf), size,
+ DMA_FROM_DEVICE);
+
+ BUG_ON(dma_mapping_error(&pci_dev->dev, dma_addr));
+
+ return (u64)dma_addr;
+}
+
+static inline void
+lio_unmap_ring(struct pci_dev *pci_dev,
+ u64 buf_ptr, u32 size)
+{
+ dma_unmap_single(&pci_dev->dev,
+ buf_ptr, size,
+ DMA_FROM_DEVICE);
+}
+
+static inline void *octeon_fast_packet_alloc(struct octeon_device *oct,
+ struct octeon_droq *droq,
+ u32 q_no, u32 size)
+{
+ return recv_buffer_alloc(oct, q_no, size);
+}
+
+static inline void octeon_fast_packet_next(struct octeon_droq *droq,
+ struct sk_buff *nicbuf,
+ int copy_len,
+ int idx)
+{
+ memcpy(skb_put(nicbuf, copy_len),
+ get_rbd(droq->recv_buf_list[idx].buffer), copy_len);
+}
+
+#endif
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+#include "octeon_mem_ops.h"
+
+void *
+octeon_alloc_soft_command_resp(struct octeon_device *oct,
+ struct octeon_instr_64B *cmd,
+ size_t rdatasize)
+{
+ struct octeon_soft_command *sc;
+ struct octeon_instr_ih *ih;
+ struct octeon_instr_irh *irh;
+ struct octeon_instr_rdp *rdp;
+
+ sc = (struct octeon_soft_command *)
+ octeon_alloc_soft_command(oct, 0, rdatasize, 0);
+
+ if (!sc)
+ return NULL;
+
+ /* Copy existing command structure into the soft command */
+ memcpy(&sc->cmd, cmd, sizeof(struct octeon_instr_64B));
+
+ /* Add in the response related fields. Opcode and Param are already
+ * there.
+ */
+ ih = (struct octeon_instr_ih *)&sc->cmd.ih;
+ ih->fsz = 40; /* irh + ossp[0] + ossp[1] + rdp + rptr = 40 bytes */
+
+ irh = (struct octeon_instr_irh *)&sc->cmd.irh;
+ irh->rflag = 1; /* a response is required */
+ irh->len = 4; /* means four 64-bit words immediately follow irh */
+
+ rdp = (struct octeon_instr_rdp *)&sc->cmd.rdp;
+ rdp->pcie_port = oct->pcie_port;
+ rdp->rlen = rdatasize;
+
+ *sc->status_word = COMPLETION_WORD_INIT;
+
+ sc->wait_time = 1000;
+ sc->timeout = jiffies + sc->wait_time;
+
+ return sc;
+}
+
+int octnet_send_nic_data_pkt(struct octeon_device *oct,
+ struct octnic_data_pkt *ndata,
+ u32 xmit_more)
+{
+ int ring_doorbell;
+
+ ring_doorbell = !xmit_more;
+
+ return octeon_send_command(oct, ndata->q_no, ring_doorbell, &ndata->cmd,
+ ndata->buf, ndata->datasize,
+ ndata->reqtype);
+}
+
+static void octnet_link_ctrl_callback(struct octeon_device *oct,
+ u32 status,
+ void *sc_ptr)
+{
+ struct octeon_soft_command *sc = (struct octeon_soft_command *)sc_ptr;
+ struct octnic_ctrl_pkt *nctrl;
+
+ nctrl = (struct octnic_ctrl_pkt *)sc->ctxptr;
+
+ /* Call the callback function if status is OK.
+ * Status is OK only if a response was expected and core returned
+ * success.
+ * If no response was expected, status is OK if the command was posted
+ * successfully.
+ */
+ if (!status && nctrl->cb_fn)
+ nctrl->cb_fn(nctrl);
+
+ octeon_free_soft_command(oct, sc);
+}
+
+static inline struct octeon_soft_command
+*octnic_alloc_ctrl_pkt_sc(struct octeon_device *oct,
+ struct octnic_ctrl_pkt *nctrl,
+ struct octnic_ctrl_params nparams)
+{
+ struct octeon_soft_command *sc = NULL;
+ u8 *data;
+ size_t rdatasize;
+ u32 uddsize = 0, datasize = 0;
+
+ uddsize = (u32)(nctrl->ncmd.s.more * 8);
+
+ datasize = OCTNET_CMD_SIZE + uddsize;
+ rdatasize = (nctrl->wait_time) ? 16 : 0;
+
+ sc = (struct octeon_soft_command *)
+ octeon_alloc_soft_command(oct, datasize, rdatasize,
+ sizeof(struct octnic_ctrl_pkt));
+
+ if (!sc)
+ return NULL;
+
+ memcpy(sc->ctxptr, nctrl, sizeof(struct octnic_ctrl_pkt));
+
+ data = (u8 *)sc->virtdptr;
+
+ memcpy(data, &nctrl->ncmd, OCTNET_CMD_SIZE);
+
+ octeon_swap_8B_data((u64 *)data, (OCTNET_CMD_SIZE >> 3));
+
+ if (uddsize) {
+ /* Endian-Swap for UDD should have been done by caller. */
+ memcpy(data + OCTNET_CMD_SIZE, nctrl->udd, uddsize);
+ }
+
+ octeon_prepare_soft_command(oct, sc, OPCODE_NIC, OPCODE_NIC_CMD,
+ 0, 0, 0);
+
+ sc->callback = octnet_link_ctrl_callback;
+ sc->callback_arg = sc;
+ sc->wait_time = nctrl->wait_time;
+
+ return sc;
+}
+
+int
+octnet_send_nic_ctrl_pkt(struct octeon_device *oct,
+ struct octnic_ctrl_pkt *nctrl,
+ struct octnic_ctrl_params nparams)
+{
+ int retval;
+ struct octeon_soft_command *sc = NULL;
+
+ sc = octnic_alloc_ctrl_pkt_sc(oct, nctrl, nparams);
+ if (!sc) {
+ dev_err(&oct->pci_dev->dev, "%s soft command alloc failed\n",
+ __func__);
+ return -1;
+ }
+
+ retval = octeon_send_soft_command(oct, sc);
+ if (retval) {
+ octeon_free_soft_command(oct, sc);
+ dev_err(&oct->pci_dev->dev, "%s soft command send failed status: %x\n",
+ __func__, retval);
+ return -1;
+ }
+
+ return retval;
+}
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*! \file octeon_nic.h
+ * \brief Host NIC Driver: Routine to send network data &
+ * control packet to Octeon.
+ */
+
+#ifndef __OCTEON_NIC_H__
+#define __OCTEON_NIC_H__
+
+/* Maximum number of 8-byte words can be sent in a NIC control message.
+ */
+#define MAX_NCTRL_UDD 32
+
+typedef void (*octnic_ctrl_pkt_cb_fn_t) (void *);
+
+/* Structure of control information passed by the NIC module to the OSI
+ * layer when sending control commands to Octeon device software.
+ */
+struct octnic_ctrl_pkt {
+ /** Command to be passed to the Octeon device software. */
+ union octnet_cmd ncmd;
+
+ /** Send buffer */
+ void *data;
+ u64 dmadata;
+
+ /** Response buffer */
+ void *rdata;
+ u64 dmardata;
+
+ /** Additional data that may be needed by some commands. */
+ u64 udd[MAX_NCTRL_UDD];
+
+ /** Time to wait for Octeon software to respond to this control command.
+ * If wait_time is 0, OSI assumes no response is expected.
+ */
+ size_t wait_time;
+
+ /** The network device that issued the control command. */
+ u64 netpndev;
+
+ /** Callback function called when the command has been fetched */
+ octnic_ctrl_pkt_cb_fn_t cb_fn;
+};
+
+#define MAX_UDD_SIZE(nctrl) (sizeof(nctrl->udd))
+
+/** Structure of data information passed by the NIC module to the OSI
+ * layer when forwarding data to Octeon device software.
+ */
+struct octnic_data_pkt {
+ /** Pointer to information maintained by NIC module for this packet. The
+ * OSI layer passes this as-is to the driver.
+ */
+ void *buf;
+
+ /** Type of buffer passed in "buf" above. */
+ u32 reqtype;
+
+ /** Total data bytes to be transferred in this command. */
+ u32 datasize;
+
+ /** Command to be passed to the Octeon device software. */
+ struct octeon_instr_64B cmd;
+
+ /** Input queue to use to send this command. */
+ u32 q_no;
+
+};
+
+/** Structure passed by NIC module to OSI layer to prepare a command to send
+ * network data to Octeon.
+ */
+union octnic_cmd_setup {
+ struct {
+ u32 ifidx:8;
+ u32 cksum_offset:7;
+ u32 gather:1;
+ u32 timestamp:1;
+ u32 ipv4opts_ipv6exthdr:2;
+ u32 ip_csum:1;
+ u32 tnl_csum:1;
+
+ u32 rsvd:11;
+ union {
+ u32 datasize;
+ u32 gatherptrs;
+ } u;
+ } s;
+
+ u64 u64;
+
+};
+
+struct octnic_ctrl_params {
+ u32 resp_order;
+};
+
+static inline int octnet_iq_is_full(struct octeon_device *oct, u32 q_no)
+{
+ return ((u32)atomic_read(&oct->instr_queue[q_no]->instr_pending)
+ >= (oct->instr_queue[q_no]->max_count - 2));
+}
+
+/** Utility function to prepare a 64B NIC instruction based on a setup command
+ * @param cmd - pointer to instruction to be filled in.
+ * @param setup - pointer to the setup structure
+ * @param q_no - which queue for back pressure
+ *
+ * Assumes the cmd instruction is pre-allocated, but no fields are filled in.
+ */
+static inline void
+octnet_prepare_pci_cmd(struct octeon_instr_64B *cmd,
+ union octnic_cmd_setup *setup, u32 tag)
+{
+ struct octeon_instr_ih *ih;
+ struct octeon_instr_irh *irh;
+ union octnic_packet_params packet_params;
+
+ memset(cmd, 0, sizeof(struct octeon_instr_64B));
+
+ ih = (struct octeon_instr_ih *)&cmd->ih;
+
+ /* assume that rflag is cleared so therefore front data will only have
+ * irh and ossp[1] and ossp[2] for a total of 24 bytes
+ */
+ ih->fsz = 24;
+
+ ih->tagtype = ORDERED_TAG;
+ ih->grp = DEFAULT_POW_GRP;
+
+ if (tag)
+ ih->tag = tag;
+ else
+ ih->tag = LIO_DATA(setup->s.ifidx);
+
+ ih->raw = 1;
+ ih->qos = (setup->s.ifidx & 3) + 4; /* map qos based on interface */
+
+ if (!setup->s.gather) {
+ ih->dlengsz = setup->s.u.datasize;
+ } else {
+ ih->gather = 1;
+ ih->dlengsz = setup->s.u.gatherptrs;
+ }
+
+ irh = (struct octeon_instr_irh *)&cmd->irh;
+
+ irh->opcode = OPCODE_NIC;
+ irh->subcode = OPCODE_NIC_NW_DATA;
+
+ packet_params.u32 = 0;
+
+ if (setup->s.cksum_offset) {
+ packet_params.s.csoffset = setup->s.cksum_offset;
+ packet_params.s.ipv4opts_ipv6exthdr =
+ setup->s.ipv4opts_ipv6exthdr;
+ }
+
+ packet_params.s.ip_csum = setup->s.ip_csum;
+ packet_params.s.tnl_csum = setup->s.tnl_csum;
+ packet_params.s.ifidx = setup->s.ifidx;
+ packet_params.s.tsflag = setup->s.timestamp;
+
+ irh->ossp = packet_params.u32;
+}
+
+/** Allocate and a soft command with space for a response immediately following
+ * the commnad.
+ * @param oct - octeon device pointer
+ * @param cmd - pointer to the command structure, pre-filled for everything
+ * except the response.
+ * @param rdatasize - size in bytes of the response.
+ *
+ * @returns pointer to allocated buffer with command copied into it, and
+ * response space immediately following.
+ */
+void *
+octeon_alloc_soft_command_resp(struct octeon_device *oct,
+ struct octeon_instr_64B *cmd,
+ size_t rdatasize);
+
+/** Send a NIC data packet to the device
+ * @param oct - octeon device pointer
+ * @param ndata - control structure with queueing, and buffer information
+ *
+ * @returns IQ_FAILED if it failed to add to the input queue. IQ_STOP if it the
+ * queue should be stopped, and IQ_SEND_OK if it sent okay.
+ */
+int octnet_send_nic_data_pkt(struct octeon_device *oct,
+ struct octnic_data_pkt *ndata, u32 xmit_more);
+
+/** Send a NIC control packet to the device
+ * @param oct - octeon device pointer
+ * @param nctrl - control structure with command, timout, and callback info
+ * @param nparams - response control structure
+ *
+ * @returns IQ_FAILED if it failed to add to the input queue. IQ_STOP if it the
+ * queue should be stopped, and IQ_SEND_OK if it sent okay.
+ */
+int
+octnet_send_nic_ctrl_pkt(struct octeon_device *oct,
+ struct octnic_ctrl_pkt *nctrl,
+ struct octnic_ctrl_params nparams);
+
+#endif
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+
+#define INCR_INSTRQUEUE_PKT_COUNT(octeon_dev_ptr, iq_no, field, count) \
+ (octeon_dev_ptr->instr_queue[iq_no]->stats.field += count)
+
+struct iq_post_status {
+ int status;
+ int index;
+};
+
+static void check_db_timeout(struct work_struct *work);
+static void __check_db_timeout(struct octeon_device *oct, unsigned long iq_no);
+
+static void (*reqtype_free_fn[MAX_OCTEON_DEVICES][REQTYPE_LAST + 1]) (void *);
+
+static inline int IQ_INSTR_MODE_64B(struct octeon_device *oct, int iq_no)
+{
+ struct octeon_instr_queue *iq =
+ (struct octeon_instr_queue *)oct->instr_queue[iq_no];
+ return iq->iqcmd_64B;
+}
+
+#define IQ_INSTR_MODE_32B(oct, iq_no) (!IQ_INSTR_MODE_64B(oct, iq_no))
+
+/* Define this to return the request status comaptible to old code */
+/*#define OCTEON_USE_OLD_REQ_STATUS*/
+
+/* Return 0 on success, 1 on failure */
+int octeon_init_instr_queue(struct octeon_device *oct,
+ u32 iq_no, u32 num_descs)
+{
+ struct octeon_instr_queue *iq;
+ struct octeon_iq_config *conf = NULL;
+ u32 q_size;
+ struct cavium_wq *db_wq;
+
+ if (OCTEON_CN6XXX(oct))
+ conf = &(CFG_GET_IQ_CFG(CHIP_FIELD(oct, cn6xxx, conf)));
+
+ if (!conf) {
+ dev_err(&oct->pci_dev->dev, "Unsupported Chip %x\n",
+ oct->chip_id);
+ return 1;
+ }
+
+ if (num_descs & (num_descs - 1)) {
+ dev_err(&oct->pci_dev->dev,
+ "Number of descriptors for instr queue %d not in power of 2.\n",
+ iq_no);
+ return 1;
+ }
+
+ q_size = (u32)conf->instr_type * num_descs;
+
+ iq = oct->instr_queue[iq_no];
+
+ iq->base_addr = lio_dma_alloc(oct, q_size,
+ (dma_addr_t *)&iq->base_addr_dma);
+ if (!iq->base_addr) {
+ dev_err(&oct->pci_dev->dev, "Cannot allocate memory for instr queue %d\n",
+ iq_no);
+ return 1;
+ }
+
+ iq->max_count = num_descs;
+
+ /* Initialize a list to holds requests that have been posted to Octeon
+ * but has yet to be fetched by octeon
+ */
+ iq->request_list = vmalloc(sizeof(*iq->request_list) * num_descs);
+ if (!iq->request_list) {
+ lio_dma_free(oct, q_size, iq->base_addr, iq->base_addr_dma);
+ dev_err(&oct->pci_dev->dev, "Alloc failed for IQ[%d] nr free list\n",
+ iq_no);
+ return 1;
+ }
+
+ memset(iq->request_list, 0, sizeof(*iq->request_list) * num_descs);
+
+ dev_dbg(&oct->pci_dev->dev, "IQ[%d]: base: %p basedma: %llx count: %d\n",
+ iq_no, iq->base_addr, iq->base_addr_dma, iq->max_count);
+
+ iq->iq_no = iq_no;
+ iq->fill_threshold = (u32)conf->db_min;
+ iq->fill_cnt = 0;
+ iq->host_write_index = 0;
+ iq->octeon_read_index = 0;
+ iq->flush_index = 0;
+ iq->last_db_time = 0;
+ iq->do_auto_flush = 1;
+ iq->db_timeout = (u32)conf->db_timeout;
+ atomic_set(&iq->instr_pending, 0);
+
+ /* Initialize the spinlock for this instruction queue */
+ spin_lock_init(&iq->lock);
+
+ oct->io_qmask.iq |= (1 << iq_no);
+
+ /* Set the 32B/64B mode for each input queue */
+ oct->io_qmask.iq64B |= ((conf->instr_type == 64) << iq_no);
+ iq->iqcmd_64B = (conf->instr_type == 64);
+
+ oct->fn_list.setup_iq_regs(oct, iq_no);
+
+ oct->check_db_wq[iq_no].wq = create_workqueue("check_iq_db");
+ if (!oct->check_db_wq[iq_no].wq) {
+ lio_dma_free(oct, q_size, iq->base_addr, iq->base_addr_dma);
+ dev_err(&oct->pci_dev->dev, "check db wq create failed for iq %d\n",
+ iq_no);
+ return 1;
+ }
+
+ db_wq = &oct->check_db_wq[iq_no];
+
+ INIT_DELAYED_WORK(&db_wq->wk.work, check_db_timeout);
+ db_wq->wk.ctxptr = oct;
+ db_wq->wk.ctxul = iq_no;
+ queue_delayed_work(db_wq->wq, &db_wq->wk.work, msecs_to_jiffies(1));
+
+ return 0;
+}
+
+int octeon_delete_instr_queue(struct octeon_device *oct, u32 iq_no)
+{
+ u64 desc_size = 0, q_size;
+ struct octeon_instr_queue *iq = oct->instr_queue[iq_no];
+
+ cancel_delayed_work_sync(&oct->check_db_wq[iq_no].wk.work);
+ flush_workqueue(oct->check_db_wq[iq_no].wq);
+ destroy_workqueue(oct->check_db_wq[iq_no].wq);
+
+ if (OCTEON_CN6XXX(oct))
+ desc_size =
+ CFG_GET_IQ_INSTR_TYPE(CHIP_FIELD(oct, cn6xxx, conf));
+
+ if (iq->request_list)
+ vfree(iq->request_list);
+
+ if (iq->base_addr) {
+ q_size = iq->max_count * desc_size;
+ lio_dma_free(oct, (u32)q_size, iq->base_addr,
+ iq->base_addr_dma);
+ return 0;
+ }
+ return 1;
+}
+
+/* Return 0 on success, 1 on failure */
+int octeon_setup_iq(struct octeon_device *oct,
+ u32 iq_no,
+ u32 num_descs,
+ void *app_ctx)
+{
+ if (oct->instr_queue[iq_no]) {
+ dev_dbg(&oct->pci_dev->dev, "IQ is in use. Cannot create the IQ: %d again\n",
+ iq_no);
+ oct->instr_queue[iq_no]->app_ctx = app_ctx;
+ return 0;
+ }
+ oct->instr_queue[iq_no] =
+ vmalloc(sizeof(struct octeon_instr_queue));
+ if (!oct->instr_queue[iq_no])
+ return 1;
+
+ memset(oct->instr_queue[iq_no], 0,
+ sizeof(struct octeon_instr_queue));
+
+ oct->instr_queue[iq_no]->app_ctx = app_ctx;
+ if (octeon_init_instr_queue(oct, iq_no, num_descs)) {
+ vfree(oct->instr_queue[iq_no]);
+ oct->instr_queue[iq_no] = NULL;
+ return 1;
+ }
+
+ oct->num_iqs++;
+ oct->fn_list.enable_io_queues(oct);
+ return 0;
+}
+
+int lio_wait_for_instr_fetch(struct octeon_device *oct)
+{
+ int i, retry = 1000, pending, instr_cnt = 0;
+
+ do {
+ instr_cnt = 0;
+
+ /*for (i = 0; i < oct->num_iqs; i++) {*/
+ for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) {
+ if (!(oct->io_qmask.iq & (1UL << i)))
+ continue;
+ pending =
+ atomic_read(&oct->
+ instr_queue[i]->instr_pending);
+ if (pending)
+ __check_db_timeout(oct, i);
+ instr_cnt += pending;
+ }
+
+ if (instr_cnt == 0)
+ break;
+
+ schedule_timeout_uninterruptible(1);
+
+ } while (retry-- && instr_cnt);
+
+ return instr_cnt;
+}
+
+static inline void
+ring_doorbell(struct octeon_device *oct, struct octeon_instr_queue *iq)
+{
+ if (atomic_read(&oct->status) == OCT_DEV_RUNNING) {
+ writel(iq->fill_cnt, iq->doorbell_reg);
+ /* make sure doorbell write goes through */
+ mmiowb();
+ iq->fill_cnt = 0;
+ iq->last_db_time = jiffies;
+ return;
+ }
+}
+
+static inline void __copy_cmd_into_iq(struct octeon_instr_queue *iq,
+ u8 *cmd)
+{
+ u8 *iqptr, cmdsize;
+
+ cmdsize = ((iq->iqcmd_64B) ? 64 : 32);
+ iqptr = iq->base_addr + (cmdsize * iq->host_write_index);
+
+ memcpy(iqptr, cmd, cmdsize);
+}
+
+static inline int
+__post_command(struct octeon_device *octeon_dev __attribute__((unused)),
+ struct octeon_instr_queue *iq,
+ u32 force_db __attribute__((unused)), u8 *cmd)
+{
+ u32 index = -1;
+
+ /* This ensures that the read index does not wrap around to the same
+ * position if queue gets full before Octeon could fetch any instr.
+ */
+ if (atomic_read(&iq->instr_pending) >= (s32)(iq->max_count - 1))
+ return -1;
+
+ __copy_cmd_into_iq(iq, cmd);
+
+ /* "index" is returned, host_write_index is modified. */
+ index = iq->host_write_index;
+ INCR_INDEX_BY1(iq->host_write_index, iq->max_count);
+ iq->fill_cnt++;
+
+ /* Flush the command into memory. We need to be sure the data is in
+ * memory before indicating that the instruction is pending.
+ */
+ wmb();
+
+ atomic_inc(&iq->instr_pending);
+
+ return index;
+}
+
+static inline struct iq_post_status
+__post_command2(struct octeon_device *octeon_dev __attribute__((unused)),
+ struct octeon_instr_queue *iq,
+ u32 force_db __attribute__((unused)), u8 *cmd)
+{
+ struct iq_post_status st;
+
+ st.status = IQ_SEND_OK;
+
+ /* This ensures that the read index does not wrap around to the same
+ * position if queue gets full before Octeon could fetch any instr.
+ */
+ if (atomic_read(&iq->instr_pending) >= (s32)(iq->max_count - 1)) {
+ st.status = IQ_SEND_FAILED;
+ st.index = -1;
+ return st;
+ }
+
+ if (atomic_read(&iq->instr_pending) >= (s32)(iq->max_count - 2))
+ st.status = IQ_SEND_STOP;
+
+ __copy_cmd_into_iq(iq, cmd);
+
+ /* "index" is returned, host_write_index is modified. */
+ st.index = iq->host_write_index;
+ INCR_INDEX_BY1(iq->host_write_index, iq->max_count);
+ iq->fill_cnt++;
+
+ /* Flush the command into memory. We need to be sure the data is in
+ * memory before indicating that the instruction is pending.
+ */
+ wmb();
+
+ atomic_inc(&iq->instr_pending);
+
+ return st;
+}
+
+int
+octeon_register_reqtype_free_fn(struct octeon_device *oct, int reqtype,
+ void (*fn)(void *))
+{
+ if (reqtype > REQTYPE_LAST) {
+ dev_err(&oct->pci_dev->dev, "%s: Invalid reqtype: %d\n",
+ __func__, reqtype);
+ return -EINVAL;
+ }
+
+ reqtype_free_fn[oct->octeon_id][reqtype] = fn;
+
+ return 0;
+}
+
+static inline void
+__add_to_request_list(struct octeon_instr_queue *iq,
+ int idx, void *buf, int reqtype)
+{
+ iq->request_list[idx].buf = buf;
+ iq->request_list[idx].reqtype = reqtype;
+}
+
+int
+lio_process_iq_request_list(struct octeon_device *oct,
+ struct octeon_instr_queue *iq)
+{
+ int reqtype;
+ void *buf;
+ u32 old = iq->flush_index;
+ u32 inst_count = 0;
+ unsigned pkts_compl = 0, bytes_compl = 0;
+ struct octeon_soft_command *sc;
+ struct octeon_instr_irh *irh;
+
+ while (old != iq->octeon_read_index) {
+ reqtype = iq->request_list[old].reqtype;
+ buf = iq->request_list[old].buf;
+
+ if (reqtype == REQTYPE_NONE)
+ goto skip_this;
+
+ octeon_update_tx_completion_counters(buf, reqtype, &pkts_compl,
+ &bytes_compl);
+
+ switch (reqtype) {
+ case REQTYPE_NORESP_NET:
+ case REQTYPE_NORESP_NET_SG:
+ case REQTYPE_RESP_NET_SG:
+ reqtype_free_fn[oct->octeon_id][reqtype](buf);
+ break;
+ case REQTYPE_RESP_NET:
+ case REQTYPE_SOFT_COMMAND:
+ sc = buf;
+
+ irh = (struct octeon_instr_irh *)&sc->cmd.irh;
+ if (irh->rflag) {
+ /* We're expecting a response from Octeon.
+ * It's up to lio_process_ordered_list() to
+ * process sc. Add sc to the ordered soft
+ * command response list because we expect
+ * a response from Octeon.
+ */
+ spin_lock_bh(&oct->response_list
+ [OCTEON_ORDERED_SC_LIST].lock);
+ atomic_inc(&oct->response_list
+ [OCTEON_ORDERED_SC_LIST].
+ pending_req_count);
+ list_add_tail(&sc->node, &oct->response_list
+ [OCTEON_ORDERED_SC_LIST].head);
+ spin_unlock_bh(&oct->response_list
+ [OCTEON_ORDERED_SC_LIST].lock);
+ } else {
+ if (sc->callback) {
+ sc->callback(oct, OCTEON_REQUEST_DONE,
+ sc->callback_arg);
+ }
+ }
+ break;
+ default:
+ dev_err(&oct->pci_dev->dev,
+ "%s Unknown reqtype: %d buf: %p at idx %d\n",
+ __func__, reqtype, buf, old);
+ }
+
+ iq->request_list[old].buf = NULL;
+ iq->request_list[old].reqtype = 0;
+
+ skip_this:
+ inst_count++;
+ INCR_INDEX_BY1(old, iq->max_count);
+ }
+ if (bytes_compl)
+ octeon_report_tx_completion_to_bql(iq->app_ctx, pkts_compl,
+ bytes_compl);
+ iq->flush_index = old;
+
+ return inst_count;
+}
+
+static inline void
+update_iq_indices(struct octeon_device *oct, struct octeon_instr_queue *iq)
+{
+ u32 inst_processed = 0;
+
+ /* Calculate how many commands Octeon has read and move the read index
+ * accordingly.
+ */
+ iq->octeon_read_index = oct->fn_list.update_iq_read_idx(oct, iq);
+
+ /* Move the NORESPONSE requests to the per-device completion list. */
+ if (iq->flush_index != iq->octeon_read_index)
+ inst_processed = lio_process_iq_request_list(oct, iq);
+
+ if (inst_processed)
+ atomic_sub(inst_processed, &iq->instr_pending);
+ iq->stats.instr_processed += inst_processed;
+}
+
+static void
+octeon_flush_iq(struct octeon_device *oct, struct octeon_instr_queue *iq,
+ u32 pending_thresh)
+{
+ if (atomic_read(&iq->instr_pending) >= (s32)pending_thresh) {
+ spin_lock_bh(&iq->lock);
+ update_iq_indices(oct, iq);
+ spin_unlock_bh(&iq->lock);
+ }
+}
+
+static void __check_db_timeout(struct octeon_device *oct, unsigned long iq_no)
+{
+ struct octeon_instr_queue *iq;
+ u64 next_time;
+
+ if (!oct)
+ return;
+ iq = oct->instr_queue[iq_no];
+ if (!iq)
+ return;
+
+ /* If jiffies - last_db_time < db_timeout do nothing */
+ next_time = iq->last_db_time + iq->db_timeout;
+ if (!time_after(jiffies, (unsigned long)next_time))
+ return;
+ iq->last_db_time = jiffies;
+
+ /* Get the lock and prevent tasklets. This routine gets called from
+ * the poll thread. Instructions can now be posted in tasklet context
+ */
+ spin_lock_bh(&iq->lock);
+ if (iq->fill_cnt != 0)
+ ring_doorbell(oct, iq);
+
+ spin_unlock_bh(&iq->lock);
+
+ /* Flush the instruction queue */
+ if (iq->do_auto_flush)
+ octeon_flush_iq(oct, iq, 1);
+}
+
+/* Called by the Poll thread at regular intervals to check the instruction
+ * queue for commands to be posted and for commands that were fetched by Octeon.
+ */
+static void check_db_timeout(struct work_struct *work)
+{
+ struct cavium_wk *wk = (struct cavium_wk *)work;
+ struct octeon_device *oct = (struct octeon_device *)wk->ctxptr;
+ unsigned long iq_no = wk->ctxul;
+ struct cavium_wq *db_wq = &oct->check_db_wq[iq_no];
+
+ __check_db_timeout(oct, iq_no);
+ queue_delayed_work(db_wq->wq, &db_wq->wk.work, msecs_to_jiffies(1));
+}
+
+int
+octeon_send_command(struct octeon_device *oct, u32 iq_no,
+ u32 force_db, void *cmd, void *buf,
+ u32 datasize, u32 reqtype)
+{
+ struct iq_post_status st;
+ struct octeon_instr_queue *iq = oct->instr_queue[iq_no];
+
+ spin_lock_bh(&iq->lock);
+
+ st = __post_command2(oct, iq, force_db, cmd);
+
+ if (st.status != IQ_SEND_FAILED) {
+ octeon_report_sent_bytes_to_bql(buf, reqtype);
+ __add_to_request_list(iq, st.index, buf, reqtype);
+ INCR_INSTRQUEUE_PKT_COUNT(oct, iq_no, bytes_sent, datasize);
+ INCR_INSTRQUEUE_PKT_COUNT(oct, iq_no, instr_posted, 1);
+
+ if (iq->fill_cnt >= iq->fill_threshold || force_db)
+ ring_doorbell(oct, iq);
+ } else {
+ INCR_INSTRQUEUE_PKT_COUNT(oct, iq_no, instr_dropped, 1);
+ }
+
+ spin_unlock_bh(&iq->lock);
+
+ if (iq->do_auto_flush)
+ octeon_flush_iq(oct, iq, 2);
+
+ return st.status;
+}
+
+void
+octeon_prepare_soft_command(struct octeon_device *oct,
+ struct octeon_soft_command *sc,
+ u8 opcode,
+ u8 subcode,
+ u32 irh_ossp,
+ u64 ossp0,
+ u64 ossp1)
+{
+ struct octeon_config *oct_cfg;
+ struct octeon_instr_ih *ih;
+ struct octeon_instr_irh *irh;
+ struct octeon_instr_rdp *rdp;
+
+ BUG_ON(opcode > 15);
+ BUG_ON(subcode > 127);
+
+ oct_cfg = octeon_get_conf(oct);
+
+ ih = (struct octeon_instr_ih *)&sc->cmd.ih;
+ ih->tagtype = ATOMIC_TAG;
+ ih->tag = LIO_CONTROL;
+ ih->raw = 1;
+ ih->grp = CFG_GET_CTRL_Q_GRP(oct_cfg);
+
+ if (sc->datasize) {
+ ih->dlengsz = sc->datasize;
+ ih->rs = 1;
+ }
+
+ irh = (struct octeon_instr_irh *)&sc->cmd.irh;
+ irh->opcode = opcode;
+ irh->subcode = subcode;
+
+ /* opcode/subcode specific parameters (ossp) */
+ irh->ossp = irh_ossp;
+ sc->cmd.ossp[0] = ossp0;
+ sc->cmd.ossp[1] = ossp1;
+
+ if (sc->rdatasize) {
+ rdp = (struct octeon_instr_rdp *)&sc->cmd.rdp;
+ rdp->pcie_port = oct->pcie_port;
+ rdp->rlen = sc->rdatasize;
+
+ irh->rflag = 1;
+ irh->len = 4;
+ ih->fsz = 40; /* irh+ossp[0]+ossp[1]+rdp+rptr = 40 bytes */
+ } else {
+ irh->rflag = 0;
+ irh->len = 2;
+ ih->fsz = 24; /* irh + ossp[0] + ossp[1] = 24 bytes */
+ }
+
+ while (!(oct->io_qmask.iq & (1 << sc->iq_no)))
+ sc->iq_no++;
+}
+
+int octeon_send_soft_command(struct octeon_device *oct,
+ struct octeon_soft_command *sc)
+{
+ struct octeon_instr_ih *ih;
+ struct octeon_instr_irh *irh;
+ struct octeon_instr_rdp *rdp;
+
+ ih = (struct octeon_instr_ih *)&sc->cmd.ih;
+ if (ih->dlengsz) {
+ BUG_ON(!sc->dmadptr);
+ sc->cmd.dptr = sc->dmadptr;
+ }
+
+ irh = (struct octeon_instr_irh *)&sc->cmd.irh;
+ if (irh->rflag) {
+ BUG_ON(!sc->dmarptr);
+ BUG_ON(!sc->status_word);
+ *sc->status_word = COMPLETION_WORD_INIT;
+
+ rdp = (struct octeon_instr_rdp *)&sc->cmd.rdp;
+
+ sc->cmd.rptr = sc->dmarptr;
+ }
+
+ if (sc->wait_time)
+ sc->timeout = jiffies + sc->wait_time;
+
+ return octeon_send_command(oct, sc->iq_no, 1, &sc->cmd, sc,
+ (u32)ih->dlengsz, REQTYPE_SOFT_COMMAND);
+}
+
+int octeon_setup_sc_buffer_pool(struct octeon_device *oct)
+{
+ int i;
+ u64 dma_addr;
+ struct octeon_soft_command *sc;
+
+ INIT_LIST_HEAD(&oct->sc_buf_pool.head);
+ spin_lock_init(&oct->sc_buf_pool.lock);
+ atomic_set(&oct->sc_buf_pool.alloc_buf_count, 0);
+
+ for (i = 0; i < MAX_SOFT_COMMAND_BUFFERS; i++) {
+ sc = (struct octeon_soft_command *)
+ lio_dma_alloc(oct,
+ SOFT_COMMAND_BUFFER_SIZE,
+ (dma_addr_t *)&dma_addr);
+ if (!sc)
+ return 1;
+
+ sc->dma_addr = dma_addr;
+ sc->size = SOFT_COMMAND_BUFFER_SIZE;
+
+ list_add_tail(&sc->node, &oct->sc_buf_pool.head);
+ }
+
+ return 0;
+}
+
+int octeon_free_sc_buffer_pool(struct octeon_device *oct)
+{
+ struct list_head *tmp, *tmp2;
+ struct octeon_soft_command *sc;
+
+ spin_lock(&oct->sc_buf_pool.lock);
+
+ list_for_each_safe(tmp, tmp2, &oct->sc_buf_pool.head) {
+ list_del(tmp);
+
+ sc = (struct octeon_soft_command *)tmp;
+
+ lio_dma_free(oct, sc->size, sc, sc->dma_addr);
+ }
+
+ INIT_LIST_HEAD(&oct->sc_buf_pool.head);
+
+ spin_unlock(&oct->sc_buf_pool.lock);
+
+ return 0;
+}
+
+struct octeon_soft_command *octeon_alloc_soft_command(struct octeon_device *oct,
+ u32 datasize,
+ u32 rdatasize,
+ u32 ctxsize)
+{
+ u64 dma_addr;
+ u32 size;
+ u32 offset = sizeof(struct octeon_soft_command);
+ struct octeon_soft_command *sc = NULL;
+ struct list_head *tmp;
+
+ BUG_ON((offset + datasize + rdatasize + ctxsize) >
+ SOFT_COMMAND_BUFFER_SIZE);
+
+ spin_lock(&oct->sc_buf_pool.lock);
+
+ if (list_empty(&oct->sc_buf_pool.head)) {
+ spin_unlock(&oct->sc_buf_pool.lock);
+ return NULL;
+ }
+
+ list_for_each(tmp, &oct->sc_buf_pool.head)
+ break;
+
+ list_del(tmp);
+
+ atomic_inc(&oct->sc_buf_pool.alloc_buf_count);
+
+ spin_unlock(&oct->sc_buf_pool.lock);
+
+ sc = (struct octeon_soft_command *)tmp;
+
+ dma_addr = sc->dma_addr;
+ size = sc->size;
+
+ memset(sc, 0, sc->size);
+
+ sc->dma_addr = dma_addr;
+ sc->size = size;
+
+ if (ctxsize) {
+ sc->ctxptr = (u8 *)sc + offset;
+ sc->ctxsize = ctxsize;
+ }
+
+ /* Start data at 128 byte boundary */
+ offset = (offset + ctxsize + 127) & 0xffffff80;
+
+ if (datasize) {
+ sc->virtdptr = (u8 *)sc + offset;
+ sc->dmadptr = dma_addr + offset;
+ sc->datasize = datasize;
+ }
+
+ /* Start rdata at 128 byte boundary */
+ offset = (offset + datasize + 127) & 0xffffff80;
+
+ if (rdatasize) {
+ BUG_ON(rdatasize < 16);
+ sc->virtrptr = (u8 *)sc + offset;
+ sc->dmarptr = dma_addr + offset;
+ sc->rdatasize = rdatasize;
+ sc->status_word = (u64 *)((u8 *)(sc->virtrptr) + rdatasize - 8);
+ }
+
+ return sc;
+}
+
+void octeon_free_soft_command(struct octeon_device *oct,
+ struct octeon_soft_command *sc)
+{
+ spin_lock(&oct->sc_buf_pool.lock);
+
+ list_add_tail(&sc->node, &oct->sc_buf_pool.head);
+
+ atomic_dec(&oct->sc_buf_pool.alloc_buf_count);
+
+ spin_unlock(&oct->sc_buf_pool.lock);
+}
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+
+static void oct_poll_req_completion(struct work_struct *work);
+
+int octeon_setup_response_list(struct octeon_device *oct)
+{
+ int i, ret = 0;
+ struct cavium_wq *cwq;
+
+ for (i = 0; i < MAX_RESPONSE_LISTS; i++) {
+ INIT_LIST_HEAD(&oct->response_list[i].head);
+ spin_lock_init(&oct->response_list[i].lock);
+ atomic_set(&oct->response_list[i].pending_req_count, 0);
+ }
+
+ oct->dma_comp_wq.wq = create_workqueue("dma-comp");
+ if (!oct->dma_comp_wq.wq) {
+ dev_err(&oct->pci_dev->dev, "failed to create wq thread\n");
+ return -ENOMEM;
+ }
+
+ cwq = &oct->dma_comp_wq;
+ INIT_DELAYED_WORK(&cwq->wk.work, oct_poll_req_completion);
+ cwq->wk.ctxptr = oct;
+ queue_delayed_work(cwq->wq, &cwq->wk.work, msecs_to_jiffies(100));
+
+ return ret;
+}
+
+void octeon_delete_response_list(struct octeon_device *oct)
+{
+ cancel_delayed_work_sync(&oct->dma_comp_wq.wk.work);
+ flush_workqueue(oct->dma_comp_wq.wq);
+ destroy_workqueue(oct->dma_comp_wq.wq);
+}
+
+int lio_process_ordered_list(struct octeon_device *octeon_dev,
+ u32 force_quit)
+{
+ struct octeon_response_list *ordered_sc_list;
+ struct octeon_soft_command *sc;
+ int request_complete = 0;
+ int resp_to_process = MAX_ORD_REQS_TO_PROCESS;
+ u32 status;
+ u64 status64;
+ struct octeon_instr_rdp *rdp;
+
+ ordered_sc_list = &octeon_dev->response_list[OCTEON_ORDERED_SC_LIST];
+
+ do {
+ spin_lock_bh(&ordered_sc_list->lock);
+
+ if (ordered_sc_list->head.next == &ordered_sc_list->head) {
+ /* ordered_sc_list is empty; there is
+ * nothing to process
+ */
+ spin_unlock_bh
+ (&ordered_sc_list->lock);
+ return 1;
+ }
+
+ sc = (struct octeon_soft_command *)ordered_sc_list->
+ head.next;
+ rdp = (struct octeon_instr_rdp *)&sc->cmd.rdp;
+
+ status = OCTEON_REQUEST_PENDING;
+
+ /* check if octeon has finished DMA'ing a response
+ * to where rptr is pointing to
+ */
+ dma_sync_single_for_cpu(&octeon_dev->pci_dev->dev,
+ sc->cmd.rptr, rdp->rlen,
+ DMA_FROM_DEVICE);
+ status64 = *sc->status_word;
+
+ if (status64 != COMPLETION_WORD_INIT) {
+ if ((status64 & 0xff) != 0xff) {
+ octeon_swap_8B_data(&status64, 1);
+ if (((status64 & 0xff) != 0xff)) {
+ status = (u32)(status64 &
+ 0xffffffffULL);
+ }
+ }
+ } else if (force_quit || (sc->timeout &&
+ time_after(jiffies, (unsigned long)sc->timeout))) {
+ status = OCTEON_REQUEST_TIMEOUT;
+ }
+
+ if (status != OCTEON_REQUEST_PENDING) {
+ /* we have received a response or we have timed out */
+ /* remove node from linked list */
+ list_del(&sc->node);
+ atomic_dec(&octeon_dev->response_list
+ [OCTEON_ORDERED_SC_LIST].
+ pending_req_count);
+ spin_unlock_bh
+ (&ordered_sc_list->lock);
+
+ if (sc->callback)
+ sc->callback(octeon_dev, status,
+ sc->callback_arg);
+
+ request_complete++;
+
+ } else {
+ /* no response yet */
+ request_complete = 0;
+ spin_unlock_bh
+ (&ordered_sc_list->lock);
+ }
+
+ /* If we hit the Max Ordered requests to process every loop,
+ * we quit
+ * and let this function be invoked the next time the poll
+ * thread runs
+ * to process the remaining requests. This function can take up
+ * the entire CPU if there is no upper limit to the requests
+ * processed.
+ */
+ if (request_complete >= resp_to_process)
+ break;
+ } while (request_complete);
+
+ return 0;
+}
+
+static void oct_poll_req_completion(struct work_struct *work)
+{
+ struct cavium_wk *wk = (struct cavium_wk *)work;
+ struct octeon_device *oct = (struct octeon_device *)wk->ctxptr;
+ struct cavium_wq *cwq = &oct->dma_comp_wq;
+
+ lio_process_ordered_list(oct, 0);
+
+ queue_delayed_work(cwq->wq, &cwq->wk.work, msecs_to_jiffies(100));
+}
--- /dev/null
+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ * Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*! \file response_manager.h
+ * \brief Host Driver: Response queues for host instructions.
+ */
+
+#ifndef __RESPONSE_MANAGER_H__
+#define __RESPONSE_MANAGER_H__
+
+/** Maximum ordered requests to process in every invocation of
+ * lio_process_ordered_list(). The function will continue to process requests
+ * as long as it can find one that has finished processing. If it keeps
+ * finding requests that have completed, the function can run for ever. The
+ * value defined here sets an upper limit on the number of requests it can
+ * process before it returns control to the poll thread.
+ */
+#define MAX_ORD_REQS_TO_PROCESS 4096
+
+/** Head of a response list. There are several response lists in the
+ * system. One for each response order- Unordered, ordered
+ * and 1 for noresponse entries on each instruction queue.
+ */
+struct octeon_response_list {
+ /** List structure to add delete pending entries to */
+ struct list_head head;
+
+ /** A lock for this response list */
+ spinlock_t lock;
+
+ atomic_t pending_req_count;
+};
+
+/** The type of response list.
+ */
+enum {
+ OCTEON_ORDERED_LIST = 0,
+ OCTEON_UNORDERED_NONBLOCKING_LIST = 1,
+ OCTEON_UNORDERED_BLOCKING_LIST = 2,
+ OCTEON_ORDERED_SC_LIST = 3
+};
+
+/** Response Order values for a Octeon Request. */
+enum {
+ OCTEON_RESP_ORDERED = 0,
+ OCTEON_RESP_UNORDERED = 1,
+ OCTEON_RESP_NORESPONSE = 2
+};
+
+/** Error codes used in Octeon Host-Core communication.
+ *
+ * 31 16 15 0
+ * ---------------------------------
+ * | | |
+ * ---------------------------------
+ * Error codes are 32-bit wide. The upper 16-bits, called Major Error Number,
+ * are reserved to identify the group to which the error code belongs. The
+ * lower 16-bits, called Minor Error Number, carry the actual code.
+ *
+ * So error codes are (MAJOR NUMBER << 16)| MINOR_NUMBER.
+ */
+
+/*------------ Error codes used by host driver -----------------*/
+#define DRIVER_MAJOR_ERROR_CODE 0x0000
+
+/** A value of 0x00000000 indicates no error i.e. success */
+#define DRIVER_ERROR_NONE 0x00000000
+
+/** (Major number: 0x0000; Minor Number: 0x0001) */
+#define DRIVER_ERROR_REQ_PENDING 0x00000001
+#define DRIVER_ERROR_REQ_TIMEOUT 0x00000003
+#define DRIVER_ERROR_REQ_EINTR 0x00000004
+#define DRIVER_ERROR_REQ_ENXIO 0x00000006
+#define DRIVER_ERROR_REQ_ENOMEM 0x0000000C
+#define DRIVER_ERROR_REQ_EINVAL 0x00000016
+#define DRIVER_ERROR_REQ_FAILED 0x000000ff
+
+/** Status for a request.
+ * If a request is not queued to Octeon by the driver, the driver returns
+ * an error condition that's describe by one of the OCTEON_REQ_ERR_* value
+ * below. If the request is successfully queued, the driver will return
+ * a OCTEON_REQUEST_PENDING status. OCTEON_REQUEST_TIMEOUT and
+ * OCTEON_REQUEST_INTERRUPTED are only returned by the driver if the
+ * response for request failed to arrive before a time-out period or if
+ * the request processing * got interrupted due to a signal respectively.
+ */
+enum {
+ OCTEON_REQUEST_DONE = (DRIVER_ERROR_NONE),
+ OCTEON_REQUEST_PENDING = (DRIVER_ERROR_REQ_PENDING),
+ OCTEON_REQUEST_TIMEOUT = (DRIVER_ERROR_REQ_TIMEOUT),
+ OCTEON_REQUEST_INTERRUPTED = (DRIVER_ERROR_REQ_EINTR),
+ OCTEON_REQUEST_NO_DEVICE = (0x00000021),
+ OCTEON_REQUEST_NOT_RUNNING,
+ OCTEON_REQUEST_INVALID_IQ,
+ OCTEON_REQUEST_INVALID_BUFCNT,
+ OCTEON_REQUEST_INVALID_RESP_ORDER,
+ OCTEON_REQUEST_NO_MEMORY,
+ OCTEON_REQUEST_INVALID_BUFSIZE,
+ OCTEON_REQUEST_NO_PENDING_ENTRY,
+ OCTEON_REQUEST_NO_IQ_SPACE = (0x7FFFFFFF)
+
+};
+
+/** Initialize the response lists. The number of response lists to create is
+ * given by count.
+ * @param octeon_dev - the octeon device structure.
+ */
+int octeon_setup_response_list(struct octeon_device *octeon_dev);
+
+void octeon_delete_response_list(struct octeon_device *octeon_dev);
+
+/** Check the status of first entry in the ordered list. If the instruction at
+ * that entry finished processing or has timed-out, the entry is cleaned.
+ * @param octeon_dev - the octeon device structure.
+ * @param force_quit - the request is forced to timeout if this is 1
+ * @return 1 if the ordered list is empty, 0 otherwise.
+ */
+int lio_process_ordered_list(struct octeon_device *octeon_dev,
+ u32 force_quit);
+
+#endif
projects / openwrt / staging / blogic.git / commitdiff