if (err != MMC_ERR_NONE)
return err;
+ /*
+ * Default bus width is 1 bit.
+ */
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
+
+ /*
+ * We can only change the bus width of the selected
+ * card so therefore we have to put the handling
+ * here.
+ */
+ if (host->caps & MMC_CAP_4_BIT_DATA) {
+ /*
+ * The card is in 1 bit mode by default so
+ * we only need to change if it supports the
+ * wider version.
+ */
+ if (mmc_card_sd(card) &&
+ (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+ struct mmc_command cmd;
+ cmd.opcode = SD_APP_SET_BUS_WIDTH;
+ cmd.arg = SD_BUS_WIDTH_4;
+ cmd.flags = MMC_RSP_R1;
+
+ err = mmc_wait_for_app_cmd(host, card->rca, &cmd,
+ CMD_RETRIES);
+ if (err != MMC_ERR_NONE)
+ return err;
+
+ host->ios.bus_width = MMC_BUS_WIDTH_4;
+ }
+ }
+
+ host->ops->set_ios(host, &host->ios);
+
return MMC_ERR_NONE;
}
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_UP;
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ops->set_ios(host, &host->ios);
mmc_delay(1);
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
host->ios.chip_select = MMC_CS_DONTCARE;
host->ios.power_mode = MMC_POWER_OFF;
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
host->ops->set_ios(host, &host->ios);
}
#define MMC_POWER_OFF 0
#define MMC_POWER_UP 1
#define MMC_POWER_ON 2
+
+ unsigned char bus_width; /* data bus width */
+
+#define MMC_BUS_WIDTH_1 0
+#define MMC_BUS_WIDTH_4 2
};
struct mmc_host_ops {
unsigned int f_max;
u32 ocr_avail;
+ unsigned long caps; /* Host capabilities */
+
+#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */
+
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
unsigned short max_hw_segs; /* see blk_queue_max_hw_segments */