--- /dev/null
+/*
+ * D-Link DHP-1565 rev. A1 board support
+ *
+ * Copyright (C) 2014 Jacek Kikiewicz
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DHP1565A1_GPIO_LED_BLUE_USB 11
+#define DHP1565A1_GPIO_LED_AMBER_POWER 14
+#define DHP1565A1_GPIO_LED_BLUE_POWER 22
+#define DHP1565A1_GPIO_LED_BLUE_WPS 15
+#define DHP1565A1_GPIO_LED_AMBER_PLANET 19
+#define DHP1565A1_GPIO_LED_BLUE_PLANET 18
+#define DHP1565A1_GPIO_LED_WLAN_2G 13
+
+#define DHP1565A1_GPIO_WAN_LED_ENABLE 20
+
+#define DHP1565A1_GPIO_BTN_RESET 17
+#define DHP1565A1_GPIO_BTN_WPS 16
+
+#define DHP1565A1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DHP1565A1_KEYS_DEBOUNCE_INTERVAL (3 * DHP1565A1_KEYS_POLL_INTERVAL)
+
+#define DHP1565A1_MAC0_OFFSET 0xFFA0
+#define DHP1565A1_MAC1_OFFSET 0xFFB4
+#define DHP1565A1_WMAC0_OFFSET 0x5
+#define DHP1565A1_WMAC_CALDATA_OFFSET 0x1000
+#define DHP1565A1_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led dhp1565a1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:amber:power",
+ .gpio = DHP1565A1_GPIO_LED_AMBER_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:power",
+ .gpio = DHP1565A1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:amber:planet",
+ .gpio = DHP1565A1_GPIO_LED_AMBER_PLANET,
+ .active_low = 1,
+ },
+ {
+ .name = "d-link:green:planet",
+ .gpio = DHP1565A1_GPIO_LED_BLUE_PLANET,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button dhp1565a1_gpio_keys[] __initdata = {
+ {
+ .desc = "Soft reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DHP1565A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DHP1565A1_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg dhp1565a1_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data dhp1565a1_ar8327_data = {
+ .pad0_cfg = &dhp1565a1_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info dhp1565a1_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &dhp1565a1_ar8327_data,
+ },
+};
+
+static void __init dhp1565a1_generic_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
+ u8 wmac0[ETH_ALEN];
+
+ ath79_parse_ascii_mac(mac + DHP1565A1_MAC0_OFFSET, mac0);
+ ath79_parse_ascii_mac(mac + DHP1565A1_MAC1_OFFSET, mac1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_gpio_keys_polled(-1, DHP1565A1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dhp1565a1_gpio_keys),
+ dhp1565a1_gpio_keys);
+
+ ath79_init_mac(wmac0, mac0, 0);
+ ath79_register_wmac(art + DHP1565A1_WMAC_CALDATA_OFFSET, wmac0);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+ mdiobus_register_board_info(dhp1565a1_mdio0_info,
+ ARRAY_SIZE(dhp1565a1_mdio0_info));
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 1);
+
+ /* GMAC0 is connected to an AR8327N switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+}
+
+static void __init dhp1565a1_setup(void)
+{
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dhp1565a1_leds_gpio),
+ dhp1565a1_leds_gpio);
+
+ dhp1565a1_generic_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_DHP_1565_A1, "DHP-1565-A1",
+ "D-Link DHP-1565 rev. A1",
+ dhp1565a1_setup);
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
+$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
--- /dev/null
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -39,6 +39,7 @@
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
+ ATH79_MACH_DB120, /* Atheros DB120 reference board */
+ ATH79_MACH_PB44, /* Atheros PB44 reference board */
++ ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */
+ ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
+ ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
+ ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -283,6 +283,17 @@
+ select ATH79_DEV_USB
+ select MYLOADER
+
++config ATH79_MACH_DHP_1565_A1
++ bool "D-Link DHP-1565 rev. A1 board support"
++ select SOC_AR934X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_DIR_505_A1
+ bool "D-Link DIR-505-A1 support"
+ select SOC_AR933X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -54,6 +54,7 @@
+ obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+ obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
projects / openwrt / staging / wigyori.git / commitdiff