--- /dev/null
+From ee0175b3b44288c74d5292c2a9c2c154f6c0317e Mon Sep 17 00:00:00 2001
+From: Sander Vanheule <sander@svanheule.net>
+Date: Sun, 7 Aug 2022 21:21:15 +0200
+Subject: [PATCH] gpio: realtek-otto: switch to 32-bit I/O
+
+By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
+on MIPS, the IMR can end up containing garbage. This then results in
+interrupt triggers for lines that don't have an interrupt handler
+associated. The irq_desc lookup fails, and the ISR will not be cleared,
+keeping the CPU busy until reboot, or until another IMR operation
+restores the correct value. This situation appears to happen very
+rarely, for < 0.5% of IMR writes.
+
+Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
+mapped peripheral registers, switch to using 32-bit I/O only, operating
+on the entire bank for all single bit line settings. For 2-bit line
+settings, with 16-bit port values, stick to manual (un)packing.
+
+This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
+GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).
+
+Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> # DGS-1210-52
+Reported-by: Birger Koblitz <mail@birger-koblitz.de> # GS728TP
+Reported-by: Jan Hoffmann <jan@3e8.eu> # 1920-16G
+Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support")
+Signed-off-by: Sander Vanheule <sander@svanheule.net>
+Cc: Paul Cercueil <paul@crapouillou.net>
+Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
+
+Update patch for missing upstream changes:
+ - commit a01a40e33499 ("gpio: realtek-otto: Make the irqchip immutable")
+ - commit dbd1c54fc820 ("gpio: Bulk conversion to generic_handle_domain_irq()")
+Signed-off-by: Sander Vanheule <sander@svanheule.net>
+
+---
+ drivers/gpio/gpio-realtek-otto.c | 166 ++++++++++++++++---------------
+ 1 file changed, 85 insertions(+), 81 deletions(-)
+
+--- a/drivers/gpio/gpio-realtek-otto.c
++++ b/drivers/gpio/gpio-realtek-otto.c
+@@ -46,10 +46,20 @@
+ * @lock: Lock for accessing the IRQ registers and values
+ * @intr_mask: Mask for interrupts lines
+ * @intr_type: Interrupt type selection
++ * @bank_read: Read a bank setting as a single 32-bit value
++ * @bank_write: Write a bank setting as a single 32-bit value
++ * @imr_line_pos: Bit shift of an IRQ line's IMR value.
++ *
++ * The DIR, DATA, and ISR registers consist of four 8-bit port values, packed
++ * into a single 32-bit register. Use @bank_read (@bank_write) to get (assign)
++ * a value from (to) these registers. The IMR register consists of four 16-bit
++ * port values, packed into two 32-bit registers. Use @imr_line_pos to get the
++ * bit shift of the 2-bit field for a line's IMR settings. Shifts larger than
++ * 32 overflow into the second register.
+ *
+ * Because the interrupt mask register (IMR) combines the function of IRQ type
+ * selection and masking, two extra values are stored. @intr_mask is used to
+- * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
++ * mask/unmask the interrupts for a GPIO line, and @intr_type is used to store
+ * the selected interrupt types. The logical AND of these values is written to
+ * IMR on changes.
+ */
+@@ -59,10 +69,11 @@ struct realtek_gpio_ctrl {
+ void __iomem *cpumask_base;
+ struct cpumask cpu_irq_maskable;
+ raw_spinlock_t lock;
+- u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
+- u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
+- unsigned int (*port_offset_u8)(unsigned int port);
+- unsigned int (*port_offset_u16)(unsigned int port);
++ u8 intr_mask[REALTEK_GPIO_MAX];
++ u8 intr_type[REALTEK_GPIO_MAX];
++ u32 (*bank_read)(void __iomem *reg);
++ void (*bank_write)(void __iomem *reg, u32 value);
++ unsigned int (*line_imr_pos)(unsigned int line);
+ };
+
+ /* Expand with more flags as devices with other quirks are added */
+@@ -101,14 +112,22 @@ static struct realtek_gpio_ctrl *irq_dat
+ * port. The two interrupt mask registers store two bits per GPIO, so use u16
+ * values.
+ */
+-static unsigned int realtek_gpio_port_offset_u8(unsigned int port)
++static u32 realtek_gpio_bank_read_swapped(void __iomem *reg)
++{
++ return ioread32be(reg);
++}
++
++static void realtek_gpio_bank_write_swapped(void __iomem *reg, u32 value)
+ {
+- return port;
++ iowrite32be(value, reg);
+ }
+
+-static unsigned int realtek_gpio_port_offset_u16(unsigned int port)
++static unsigned int realtek_gpio_line_imr_pos_swapped(unsigned int line)
+ {
+- return 2 * port;
++ unsigned int port_pin = line % 8;
++ unsigned int port = line / 8;
++
++ return 2 * (8 * (port ^ 1) + port_pin);
+ }
+
+ /*
+@@ -119,64 +138,65 @@ static unsigned int realtek_gpio_port_of
+ * per GPIO, so use u16 values. The first register contains ports 1 and 0, the
+ * second ports 3 and 2.
+ */
+-static unsigned int realtek_gpio_port_offset_u8_rev(unsigned int port)
++static u32 realtek_gpio_bank_read(void __iomem *reg)
+ {
+- return 3 - port;
++ return ioread32(reg);
+ }
+
+-static unsigned int realtek_gpio_port_offset_u16_rev(unsigned int port)
++static void realtek_gpio_bank_write(void __iomem *reg, u32 value)
+ {
+- return 2 * (port ^ 1);
++ iowrite32(value, reg);
+ }
+
+-static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
+- unsigned int port, u16 irq_type, u16 irq_mask)
++static unsigned int realtek_gpio_line_imr_pos(unsigned int line)
+ {
+- iowrite16(irq_type & irq_mask,
+- ctrl->base + REALTEK_GPIO_REG_IMR + ctrl->port_offset_u16(port));
++ return 2 * line;
+ }
+
+-static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
+- unsigned int port, u8 mask)
++static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl, u32 mask)
+ {
+- iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
++ ctrl->bank_write(ctrl->base + REALTEK_GPIO_REG_ISR, mask);
+ }
+
+-static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
++static u32 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl)
+ {
+- return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + ctrl->port_offset_u8(port));
++ return ctrl->bank_read(ctrl->base + REALTEK_GPIO_REG_ISR);
+ }
+
+-/* Set the rising and falling edge mask bits for a GPIO port pin */
+-static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
++/* Set the rising and falling edge mask bits for a GPIO pin */
++static void realtek_gpio_update_line_imr(struct realtek_gpio_ctrl *ctrl, unsigned int line)
+ {
+- return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
++ void __iomem *reg = ctrl->base + REALTEK_GPIO_REG_IMR;
++ unsigned int line_shift = ctrl->line_imr_pos(line);
++ unsigned int shift = line_shift % 32;
++ u32 irq_type = ctrl->intr_type[line];
++ u32 irq_mask = ctrl->intr_mask[line];
++ u32 reg_val;
++
++ reg += 4 * (line_shift / 32);
++ reg_val = ioread32(reg);
++ reg_val &= ~(REALTEK_GPIO_IMR_LINE_MASK << shift);
++ reg_val |= (irq_type & irq_mask & REALTEK_GPIO_IMR_LINE_MASK) << shift;
++ iowrite32(reg_val, reg);
+ }
+
+ static void realtek_gpio_irq_ack(struct irq_data *data)
+ {
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ irq_hw_number_t line = irqd_to_hwirq(data);
+- unsigned int port = line / 8;
+- unsigned int port_pin = line % 8;
+
+- realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
++ realtek_gpio_clear_isr(ctrl, BIT(line));
+ }
+
+ static void realtek_gpio_irq_unmask(struct irq_data *data)
+ {
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+- unsigned int port = line / 8;
+- unsigned int port_pin = line % 8;
+ unsigned long flags;
+- u16 m;
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+- m = ctrl->intr_mask[port];
+- m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+- ctrl->intr_mask[port] = m;
+- realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
++ ctrl->intr_mask[line] = REALTEK_GPIO_IMR_LINE_MASK;
++ realtek_gpio_update_line_imr(ctrl, line);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+ }
+
+@@ -184,16 +204,11 @@ static void realtek_gpio_irq_mask(struct
+ {
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+- unsigned int port = line / 8;
+- unsigned int port_pin = line % 8;
+ unsigned long flags;
+- u16 m;
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+- m = ctrl->intr_mask[port];
+- m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+- ctrl->intr_mask[port] = m;
+- realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
++ ctrl->intr_mask[line] = 0;
++ realtek_gpio_update_line_imr(ctrl, line);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+ }
+
+@@ -201,10 +216,8 @@ static int realtek_gpio_irq_set_type(str
+ {
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+- unsigned int port = line / 8;
+- unsigned int port_pin = line % 8;
+ unsigned long flags;
+- u16 type, t;
++ u8 type;
+
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_FALLING:
+@@ -223,11 +236,8 @@ static int realtek_gpio_irq_set_type(str
+ irq_set_handler_locked(data, handle_edge_irq);
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+- t = ctrl->intr_type[port];
+- t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+- t |= realtek_gpio_imr_bits(port_pin, type);
+- ctrl->intr_type[port] = t;
+- realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
++ ctrl->intr_type[line] = type;
++ realtek_gpio_update_line_imr(ctrl, line);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+
+ return 0;
+@@ -238,31 +248,24 @@ static void realtek_gpio_irq_handler(str
+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+ struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+- unsigned int lines_done;
+- unsigned int port_pin_count;
+ unsigned int irq;
+ unsigned long status;
+ int offset;
+
+ chained_irq_enter(irq_chip, desc);
+
+- for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
+- status = realtek_gpio_read_isr(ctrl, lines_done / 8);
+- port_pin_count = min(gc->ngpio - lines_done, 8U);
+- for_each_set_bit(offset, &status, port_pin_count) {
+- irq = irq_find_mapping(gc->irq.domain, offset + lines_done);
+- generic_handle_irq(irq);
+- }
++ status = realtek_gpio_read_isr(ctrl);
++ for_each_set_bit(offset, &status, gc->ngpio) {
++ irq = irq_find_mapping(gc->irq.domain, offset);
++ generic_handle_irq(irq);
+ }
+
+ chained_irq_exit(irq_chip, desc);
+ }
+
+-static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl,
+- unsigned int port, int cpu)
++static inline void __iomem *realtek_gpio_irq_cpu_mask(struct realtek_gpio_ctrl *ctrl, int cpu)
+ {
+- return ctrl->cpumask_base + ctrl->port_offset_u8(port) +
+- REALTEK_GPIO_PORTS_PER_BANK * cpu;
++ return ctrl->cpumask_base + REALTEK_GPIO_PORTS_PER_BANK * cpu;
+ }
+
+ static int realtek_gpio_irq_set_affinity(struct irq_data *data,
+@@ -270,12 +273,10 @@ static int realtek_gpio_irq_set_affinity
+ {
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+- unsigned int port = line / 8;
+- unsigned int port_pin = line % 8;
+ void __iomem *irq_cpu_mask;
+ unsigned long flags;
+ int cpu;
+- u8 v;
++ u32 v;
+
+ if (!ctrl->cpumask_base)
+ return -ENXIO;
+@@ -283,15 +284,15 @@ static int realtek_gpio_irq_set_affinity
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+
+ for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
+- irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
+- v = ioread8(irq_cpu_mask);
++ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
++ v = ctrl->bank_read(irq_cpu_mask);
+
+ if (cpumask_test_cpu(cpu, dest))
+- v |= BIT(port_pin);
++ v |= BIT(line);
+ else
+- v &= ~BIT(port_pin);
++ v &= ~BIT(line);
+
+- iowrite8(v, irq_cpu_mask);
++ ctrl->bank_write(irq_cpu_mask, v);
+ }
+
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+@@ -305,22 +306,23 @@ static int realtek_gpio_irq_init(struct
+ {
+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+ void __iomem *irq_cpu_mask;
+- unsigned int port;
++ u32 mask_all = GENMASK(gc->ngpio - 1, 0);
++ unsigned int line;
+ int cpu;
+
+- for (port = 0; (port * 8) < gc->ngpio; port++) {
+- realtek_gpio_write_imr(ctrl, port, 0, 0);
+- realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
+-
+- /*
+- * Uniprocessor builds assume a mask always contains one CPU,
+- * so only start the loop if we have at least one maskable CPU.
+- */
+- if(!cpumask_empty(&ctrl->cpu_irq_maskable)) {
+- for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
+- irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, port, cpu);
+- iowrite8(GENMASK(7, 0), irq_cpu_mask);
+- }
++ for (line = 0; line < gc->ngpio; line++)
++ realtek_gpio_update_line_imr(ctrl, line);
++
++ realtek_gpio_clear_isr(ctrl, mask_all);
++
++ /*
++ * Uniprocessor builds assume a mask always contains one CPU,
++ * so only start the loop if we have at least one maskable CPU.
++ */
++ if(!cpumask_empty(&ctrl->cpu_irq_maskable)) {
++ for_each_cpu(cpu, &ctrl->cpu_irq_maskable) {
++ irq_cpu_mask = realtek_gpio_irq_cpu_mask(ctrl, cpu);
++ ctrl->bank_write(irq_cpu_mask, mask_all);
+ }
+ }
+
+@@ -393,12 +395,14 @@ static int realtek_gpio_probe(struct pla
+
+ if (dev_flags & GPIO_PORTS_REVERSED) {
+ bgpio_flags = 0;
+- ctrl->port_offset_u8 = realtek_gpio_port_offset_u8_rev;
+- ctrl->port_offset_u16 = realtek_gpio_port_offset_u16_rev;
++ ctrl->bank_read = realtek_gpio_bank_read;
++ ctrl->bank_write = realtek_gpio_bank_write;
++ ctrl->line_imr_pos = realtek_gpio_line_imr_pos;
+ } else {
+ bgpio_flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
+- ctrl->port_offset_u8 = realtek_gpio_port_offset_u8;
+- ctrl->port_offset_u16 = realtek_gpio_port_offset_u16;
++ ctrl->bank_read = realtek_gpio_bank_read_swapped;
++ ctrl->bank_write = realtek_gpio_bank_write_swapped;
++ ctrl->line_imr_pos = realtek_gpio_line_imr_pos_swapped;
+ }
+
+ err = bgpio_init(&ctrl->gc, dev, 4,
projects / openwrt / staging / neocturne.git / commitdiff