ARM: meson: rename GXBB to GX
authorNeil Armstrong <narmstrong@baylibre.com>
Wed, 11 Apr 2018 15:13:45 +0000 (17:13 +0200)
committerTom Rini <trini@konsulko.com>
Tue, 8 May 2018 13:07:34 +0000 (09:07 -0400)
Taking into account the Amlogic Family name starts with GX, including
the GXBB, GXL and GXM SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
15 files changed:
arch/arm/include/asm/arch-meson/gx.h [new file with mode: 0644]
arch/arm/include/asm/arch-meson/gxbb.h [deleted file]
arch/arm/mach-meson/board.c
arch/arm/mach-meson/eth.c
arch/arm/mach-meson/sm.c
board/amlogic/khadas-vim/khadas-vim.c
board/amlogic/libretech-cc/libretech-cc.c
board/amlogic/odroid-c2/odroid-c2.c
board/amlogic/p212/p212.c
include/configs/khadas-vim.h
include/configs/libretech-cc.h
include/configs/meson-gx-common.h [new file with mode: 0644]
include/configs/meson-gxbb-common.h [deleted file]
include/configs/odroid-c2.h
include/configs/p212.h

diff --git a/arch/arm/include/asm/arch-meson/gx.h b/arch/arm/include/asm/arch-meson/gx.h
new file mode 100644 (file)
index 0000000..03fb6b0
--- /dev/null
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#ifndef __GX_H__
+#define __GX_H__
+
+#define GX_FIRMWARE_MEM_SIZE   0x1000000
+
+#define GX_AOBUS_BASE          0xc8100000
+#define GX_PERIPHS_BASE        0xc8834400
+#define GX_HIU_BASE            0xc883c000
+#define GX_ETH_BASE            0xc9410000
+
+/* Always-On Peripherals registers */
+#define GX_AO_ADDR(off)        (GX_AOBUS_BASE + ((off) << 2))
+
+#define GX_AO_SEC_GP_CFG0      GX_AO_ADDR(0x90)
+#define GX_AO_SEC_GP_CFG3      GX_AO_ADDR(0x93)
+#define GX_AO_SEC_GP_CFG4      GX_AO_ADDR(0x94)
+#define GX_AO_SEC_GP_CFG5      GX_AO_ADDR(0x95)
+
+#define GX_AO_MEM_SIZE_MASK    0xFFFF0000
+#define GX_AO_MEM_SIZE_SHIFT   16
+#define GX_AO_BL31_RSVMEM_SIZE_MASK    0xFFFF0000
+#define GX_AO_BL31_RSVMEM_SIZE_SHIFT   16
+#define GX_AO_BL32_RSVMEM_SIZE_MASK    0xFFFF
+
+/* Peripherals registers */
+#define GX_PERIPHS_ADDR(off)   (GX_PERIPHS_BASE + ((off) << 2))
+
+/* GPIO registers 0 to 6 */
+#define _GX_GPIO_OFF(n)        ((n) == 6 ? 0x08 : 0x0c + 3 * (n))
+#define GX_GPIO_EN(n)          GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 0)
+#define GX_GPIO_IN(n)          GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1)
+#define GX_GPIO_OUT(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
+
+#define GX_ETH_REG_0           GX_PERIPHS_ADDR(0x50)
+#define GX_ETH_REG_1           GX_PERIPHS_ADDR(0x51)
+#define GX_ETH_REG_2           GX_PERIPHS_ADDR(0x56)
+#define GX_ETH_REG_3           GX_PERIPHS_ADDR(0x57)
+
+#define GX_ETH_REG_0_PHY_INTF          BIT(0)
+#define GX_ETH_REG_0_TX_PHASE(x)       (((x) & 3) << 5)
+#define GX_ETH_REG_0_TX_RATIO(x)       (((x) & 7) << 7)
+#define GX_ETH_REG_0_PHY_CLK_EN        BIT(10)
+#define GX_ETH_REG_0_INVERT_RMII_CLK   BIT(11)
+#define GX_ETH_REG_0_CLK_EN            BIT(12)
+
+/* HIU registers */
+#define GX_HIU_ADDR(off)       (GX_HIU_BASE + ((off) << 2))
+
+#define GX_MEM_PD_REG_0        GX_HIU_ADDR(0x40)
+
+/* Ethernet memory power domain */
+#define GX_MEM_PD_REG_0_ETH_MASK       (BIT(2) | BIT(3))
+
+/* Clock gates */
+#define GX_GCLK_MPEG_0 GX_HIU_ADDR(0x50)
+#define GX_GCLK_MPEG_1 GX_HIU_ADDR(0x51)
+#define GX_GCLK_MPEG_2 GX_HIU_ADDR(0x52)
+#define GX_GCLK_MPEG_OTHER     GX_HIU_ADDR(0x53)
+#define GX_GCLK_MPEG_AO        GX_HIU_ADDR(0x54)
+
+#define GX_GCLK_MPEG_0_I2C   BIT(9)
+#define GX_GCLK_MPEG_1_ETH     BIT(3)
+
+#endif /* __GX_H__ */
diff --git a/arch/arm/include/asm/arch-meson/gxbb.h b/arch/arm/include/asm/arch-meson/gxbb.h
deleted file mode 100644 (file)
index c7713b2..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2016 - Beniamino Galvani <b.galvani@gmail.com>
- */
-
-#ifndef __GXBB_H__
-#define __GXBB_H__
-
-#define GXBB_FIRMWARE_MEM_SIZE 0x1000000
-
-#define GXBB_AOBUS_BASE                0xc8100000
-#define GXBB_PERIPHS_BASE      0xc8834400
-#define GXBB_HIU_BASE          0xc883c000
-#define GXBB_ETH_BASE          0xc9410000
-
-/* Always-On Peripherals registers */
-#define GXBB_AO_ADDR(off)      (GXBB_AOBUS_BASE + ((off) << 2))
-
-#define GXBB_AO_SEC_GP_CFG0    GXBB_AO_ADDR(0x90)
-#define GXBB_AO_SEC_GP_CFG3    GXBB_AO_ADDR(0x93)
-#define GXBB_AO_SEC_GP_CFG4    GXBB_AO_ADDR(0x94)
-#define GXBB_AO_SEC_GP_CFG5    GXBB_AO_ADDR(0x95)
-
-#define GXBB_AO_MEM_SIZE_MASK  0xFFFF0000
-#define GXBB_AO_MEM_SIZE_SHIFT 16
-#define GXBB_AO_BL31_RSVMEM_SIZE_MASK  0xFFFF0000
-#define GXBB_AO_BL31_RSVMEM_SIZE_SHIFT 16
-#define GXBB_AO_BL32_RSVMEM_SIZE_MASK  0xFFFF
-
-/* Peripherals registers */
-#define GXBB_PERIPHS_ADDR(off) (GXBB_PERIPHS_BASE + ((off) << 2))
-
-/* GPIO registers 0 to 6 */
-#define _GXBB_GPIO_OFF(n)      ((n) == 6 ? 0x08 : 0x0c + 3 * (n))
-#define GXBB_GPIO_EN(n)                GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 0)
-#define GXBB_GPIO_IN(n)                GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 1)
-#define GXBB_GPIO_OUT(n)       GXBB_PERIPHS_ADDR(_GXBB_GPIO_OFF(n) + 2)
-
-#define GXBB_ETH_REG_0         GXBB_PERIPHS_ADDR(0x50)
-#define GXBB_ETH_REG_1         GXBB_PERIPHS_ADDR(0x51)
-#define GXBB_ETH_REG_2         GXBB_PERIPHS_ADDR(0x56)
-#define GXBB_ETH_REG_3         GXBB_PERIPHS_ADDR(0x57)
-
-#define GXBB_ETH_REG_0_PHY_INTF                BIT(0)
-#define GXBB_ETH_REG_0_TX_PHASE(x)     (((x) & 3) << 5)
-#define GXBB_ETH_REG_0_TX_RATIO(x)     (((x) & 7) << 7)
-#define GXBB_ETH_REG_0_PHY_CLK_EN      BIT(10)
-#define GXBB_ETH_REG_0_INVERT_RMII_CLK BIT(11)
-#define GXBB_ETH_REG_0_CLK_EN          BIT(12)
-
-/* HIU registers */
-#define GXBB_HIU_ADDR(off)     (GXBB_HIU_BASE + ((off) << 2))
-
-#define GXBB_MEM_PD_REG_0      GXBB_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define GXBB_MEM_PD_REG_0_ETH_MASK     (BIT(2) | BIT(3))
-
-/* Clock gates */
-#define GXBB_GCLK_MPEG_0       GXBB_HIU_ADDR(0x50)
-#define GXBB_GCLK_MPEG_1       GXBB_HIU_ADDR(0x51)
-#define GXBB_GCLK_MPEG_2       GXBB_HIU_ADDR(0x52)
-#define GXBB_GCLK_MPEG_OTHER   GXBB_HIU_ADDR(0x53)
-#define GXBB_GCLK_MPEG_AO      GXBB_HIU_ADDR(0x54)
-
-#define GXBB_GCLK_MPEG_0_I2C   BIT(9)
-#define GXBB_GCLK_MPEG_1_ETH   BIT(3)
-
-#endif /* __GXBB_H__ */
index 89e75fb65b646ce3d2689f90e22778d8789bfdcf..1ef7e5a6d1aa90e32c94195361abf7f42428f387 100644 (file)
@@ -6,7 +6,7 @@
 #include <common.h>
 #include <linux/libfdt.h>
 #include <linux/err.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <asm/arch/sm.h>
 #include <asm/armv8/mmu.h>
 #include <asm/unaligned.h>
@@ -39,8 +39,8 @@ int dram_init(void)
 phys_size_t get_effective_memsize(void)
 {
        /* Size is reported in MiB, convert it in bytes */
-       return ((readl(GXBB_AO_SEC_GP_CFG0) & GXBB_AO_MEM_SIZE_MASK)
-                       >> GXBB_AO_MEM_SIZE_SHIFT) * SZ_1M;
+       return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK)
+                       >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M;
 }
 
 static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size)
@@ -71,27 +71,27 @@ void meson_gx_init_reserved_memory(void *fdt)
         * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL
         */
 
-       reg = readl(GXBB_AO_SEC_GP_CFG3);
+       reg = readl(GX_AO_SEC_GP_CFG3);
 
-       bl31_size = ((reg & GXBB_AO_BL31_RSVMEM_SIZE_MASK)
-                       >> GXBB_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
-       bl32_size = (reg & GXBB_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
+       bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK)
+                       >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K;
+       bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K;
 
-       bl31_start = readl(GXBB_AO_SEC_GP_CFG5);
-       bl32_start = readl(GXBB_AO_SEC_GP_CFG4);
+       bl31_start = readl(GX_AO_SEC_GP_CFG5);
+       bl32_start = readl(GX_AO_SEC_GP_CFG4);
 
        /*
-        * Early Meson GXBB Firmware revisions did not provide the reserved
+        * Early Meson GX Firmware revisions did not provide the reserved
         * memory zones in the registers, keep fixed memory zone handling.
         */
-       if (IS_ENABLED(CONFIG_MESON_GXBB) &&
+       if (IS_ENABLED(CONFIG_MESON_GX) &&
            !reg && !bl31_start && !bl32_start) {
                bl31_start = 0x10000000;
                bl31_size = 0x200000;
        }
 
        /* Add first 16MiB reserved zone */
-       meson_board_add_reserved_memory(fdt, 0, GXBB_FIRMWARE_MEM_SIZE);
+       meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE);
 
        /* Add BL31 reserved zone */
        if (bl31_start && bl31_size)
@@ -107,7 +107,7 @@ void reset_cpu(ulong addr)
        psci_system_reset();
 }
 
-static struct mm_region gxbb_mem_map[] = {
+static struct mm_region gx_mem_map[] = {
        {
                .virt = 0x0UL,
                .phys = 0x0UL,
@@ -127,4 +127,4 @@ static struct mm_region gxbb_mem_map[] = {
        }
 };
 
-struct mm_region *mem_map = gxbb_mem_map;
+struct mm_region *mem_map = gx_mem_map;
index e340212c2a279b18cd532136561972850acae893..061f19a0e31c4407ed99e666226b67759b12cec2 100644 (file)
@@ -7,7 +7,7 @@
 #include <common.h>
 #include <dm.h>
 #include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <asm/arch/eth.h>
 #include <phy.h>
 
@@ -22,23 +22,23 @@ void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
        case PHY_INTERFACE_MODE_RGMII_RXID:
        case PHY_INTERFACE_MODE_RGMII_TXID:
                /* Set RGMII mode */
-               setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
-                            GXBB_ETH_REG_0_TX_PHASE(1) |
-                            GXBB_ETH_REG_0_TX_RATIO(4) |
-                            GXBB_ETH_REG_0_PHY_CLK_EN |
-                            GXBB_ETH_REG_0_CLK_EN);
+               setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
+                            GX_ETH_REG_0_TX_PHASE(1) |
+                            GX_ETH_REG_0_TX_RATIO(4) |
+                            GX_ETH_REG_0_PHY_CLK_EN |
+                            GX_ETH_REG_0_CLK_EN);
                break;
 
        case PHY_INTERFACE_MODE_RMII:
                /* Set RMII mode */
-               out_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_INVERT_RMII_CLK |
-                                        GXBB_ETH_REG_0_CLK_EN);
+               out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
+                                        GX_ETH_REG_0_CLK_EN);
 
                /* Use GXL RMII Internal PHY */
                if (IS_ENABLED(CONFIG_MESON_GXL) &&
                    (flags & MESON_GXL_USE_INTERNAL_RMII_PHY)) {
-                       writel(0x10110181, GXBB_ETH_REG_2);
-                       writel(0xe40908ff, GXBB_ETH_REG_3);
+                       writel(0x10110181, GX_ETH_REG_2);
+                       writel(0xe40908ff, GX_ETH_REG_3);
                }
 
                break;
@@ -49,6 +49,6 @@ void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
        }
 
        /* Enable power and clock gate */
-       setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
-       clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+       setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
+       clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
 }
index 9829bae657db493608c937852496da6bf11a6f48..0bba5e4a0733145bb2ae17451e03eb2323e6c581 100644 (file)
@@ -6,7 +6,7 @@
  */
 
 #include <common.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <linux/kernel.h>
 
 #define FN_GET_SHARE_MEM_INPUT_BASE    0x82000020
index d3ae7aa655a8746e3bdd0456d89c0d3aca5df0cf..692bf2add3d39fce7904c0bb0f14eae8ebd8255c 100644 (file)
@@ -8,7 +8,7 @@
 #include <dm.h>
 #include <environment.h>
 #include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/sm.h>
 #include <asm/arch/eth.h>
index 80c04fb9cd8ad14f1c0674e0c4e712dd075fdcc9..e89bf773cc7ee5f278d57bcdb3f2652e09c1ea32 100644 (file)
@@ -8,7 +8,7 @@
 #include <dm.h>
 #include <environment.h>
 #include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <asm/arch/sm.h>
 #include <asm/arch/eth.h>
 #include <asm/arch/mem.h>
@@ -33,8 +33,8 @@ int misc_init_r(void)
                          MESON_GXL_USE_INTERNAL_RMII_PHY);
 
        /* Enable power and clock gate */
-       setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
-       clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+       setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
+       clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
 
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
index 339a1bf9ca3df6d9cd1654cf17831b2e9bc6bda7..1b7fd8199bb8e32068a16fbbbfbaff7b1ff4b98d 100644 (file)
@@ -7,7 +7,7 @@
 #include <dm.h>
 #include <environment.h>
 #include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <asm/arch/sm.h>
 #include <asm/arch/eth.h>
 #include <asm/arch/mem.h>
@@ -31,13 +31,13 @@ int misc_init_r(void)
        meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
 
        /* Enable power and clock gate */
-       setbits_le32(GXBB_GCLK_MPEG_0, GXBB_GCLK_MPEG_0_I2C);
+       setbits_le32(GX_GCLK_MPEG_0, GX_GCLK_MPEG_0_I2C);
 
        /* Reset PHY on GPIOZ_14 */
-       clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
-       clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+       clrbits_le32(GX_GPIO_EN(3), BIT(14));
+       clrbits_le32(GX_GPIO_OUT(3), BIT(14));
        mdelay(10);
-       setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+       setbits_le32(GX_GPIO_OUT(3), BIT(14));
 
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
index c1f2aca56709fbc7c7bfcb91957f8aca056b7e30..06c2eaee47fb3b24e1c74e39cb84c471c48a20f9 100644 (file)
@@ -8,7 +8,7 @@
 #include <dm.h>
 #include <environment.h>
 #include <asm/io.h>
-#include <asm/arch/gxbb.h>
+#include <asm/arch/gx.h>
 #include <asm/arch/sm.h>
 #include <asm/arch/eth.h>
 #include <asm/arch/mem.h>
index db65f71d4377c957372196454babf93270540016..3a9c1e69925e2ee498fbe4987e3b86529f623f34 100644 (file)
@@ -13,6 +13,6 @@
 
 #define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-khadas-vim.dtb\0"
 
-#include <configs/meson-gxbb-common.h>
+#include <configs/meson-gx-common.h>
 
 #endif /* __CONFIG_H */
index dc778dc66a0036d07ff60d8b040581eda51e359d..b44d3bdd32163651a28f4262950ecc001f32d89a 100644 (file)
@@ -13,6 +13,6 @@
 
 #define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-libretech-cc.dtb\0"
 
-#include <configs/meson-gxbb-common.h>
+#include <configs/meson-gx-common.h>
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/meson-gx-common.h b/include/configs/meson-gx-common.h
new file mode 100644 (file)
index 0000000..6e61b70
--- /dev/null
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Amlogic Meson GX SoCs
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ */
+
+#ifndef __MESON_GX_COMMON_CONFIG_H
+#define __MESON_GX_COMMON_CONFIG_H
+
+#define CONFIG_CPU_ARMV8
+#define CONFIG_REMAKE_ELF
+#define CONFIG_NR_DRAM_BANKS           1
+#define CONFIG_ENV_SIZE                        0x2000
+#define CONFIG_SYS_MAXARGS             32
+#define CONFIG_SYS_MALLOC_LEN          (32 << 20)
+#define CONFIG_SYS_CBSIZE              1024
+
+#define CONFIG_SYS_SDRAM_BASE          0
+#define CONFIG_SYS_INIT_SP_ADDR                0x20000000
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_TEXT_BASE
+
+/* Generic Interrupt Controller Definitions */
+#define GICD_BASE                      0xc4301000
+#define GICC_BASE                      0xc4302000
+
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 0) \
+       func(MMC, mmc, 1) \
+       func(MMC, mmc, 2) \
+       func(PXE, pxe, na) \
+       func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "fdt_addr_r=0x01000000\0" \
+       "scriptaddr=0x1f000000\0" \
+       "kernel_addr_r=0x01080000\0" \
+       "pxefile_addr_r=0x01080000\0" \
+       "ramdisk_addr_r=0x13000000\0" \
+       MESON_FDTFILE_SETTING \
+       BOOTENV
+
+#define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* 64 MiB */
+
+#endif /* __MESON_GX_COMMON_CONFIG_H */
diff --git a/include/configs/meson-gxbb-common.h b/include/configs/meson-gxbb-common.h
deleted file mode 100644 (file)
index 068e36e..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuration for Amlogic Meson GXBB SoCs
- * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
- */
-
-#ifndef __MESON_GXBB_COMMON_CONFIG_H
-#define __MESON_GXBB_COMMON_CONFIG_H
-
-#define CONFIG_CPU_ARMV8
-#define CONFIG_REMAKE_ELF
-#define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_SYS_MAXARGS             32
-#define CONFIG_SYS_MALLOC_LEN          (32 << 20)
-#define CONFIG_SYS_CBSIZE              1024
-
-#define CONFIG_SYS_SDRAM_BASE          0
-#define CONFIG_SYS_INIT_SP_ADDR                0x20000000
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_TEXT_BASE
-
-/* Generic Interrupt Controller Definitions */
-#define GICD_BASE                      0xc4301000
-#define GICC_BASE                      0xc4302000
-
-#define BOOT_TARGET_DEVICES(func) \
-       func(MMC, mmc, 0) \
-       func(MMC, mmc, 1) \
-       func(MMC, mmc, 2) \
-       func(PXE, pxe, na) \
-       func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       "fdt_addr_r=0x01000000\0" \
-       "scriptaddr=0x1f000000\0" \
-       "kernel_addr_r=0x01080000\0" \
-       "pxefile_addr_r=0x01080000\0" \
-       "ramdisk_addr_r=0x13000000\0" \
-       MESON_FDTFILE_SETTING \
-       BOOTENV
-
-#define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* 64 MiB */
-
-#endif /* __MESON_GXBB_COMMON_CONFIG_H */
index a8ad21edf6fe1fd6f1a238af674fe9ae59e42ecb..913943421af658da80d697c32430d37c2d83096f 100644 (file)
@@ -13,6 +13,6 @@
 
 #define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxbb-odroidc2.dtb\0"
 
-#include <configs/meson-gxbb-common.h>
+#include <configs/meson-gx-common.h>
 
 #endif /* __CONFIG_H */
index 0e494372094e5a1f6c1d23c432be2499f16336e6..53af6bc21c10e1b8e059705b431ae4e94d2abcc4 100644 (file)
@@ -15,6 +15,6 @@
 
 #define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxl-s905x-p212.dtb\0"
 
-#include <configs/meson-gxbb-common.h>
+#include <configs/meson-gx-common.h>
 
 #endif /* __CONFIG_H */