glinet,gl-ar750s-nor|\
glinet,gl-ar750s-nor-nand|\
librerouter,librerouter-v1|\
-netgear,ex6400|\
netgear,ex7300|\
netgear,ex7300-v2|\
netgear,wndr4300-v2|\
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qca9558_netgear_ex7300.dtsi"
-
-/ {
- model = "Netgear EX6400";
- compatible = "netgear,ex6400", "qca,qca9558";
-};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qca9558_netgear_ex7300.dtsi"
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "Netgear EX7300";
compatible = "netgear,ex7300", "qca,qca9558";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
+ label-mac-device = ð0;
+ };
+
+ led_spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ num-chipselects = <0>;
+
+ led_gpio: led_gpio@0 {
+ compatible = "nxp,74lvc594";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <1>;
+ spi-max-frequency = <500000>;
+
+ gpio_latch_bit {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "gpio-latch-bit";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_amber: power_amber {
+ label = "amber:power";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ left_blue {
+ label = "blue:left";
+ gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+
+ right_blue {
+ label = "blue:right";
+ gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+
+ wps_green {
+ label = "green:wps";
+ gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+
+ client_red {
+ label = "red:client";
+ gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ client_green {
+ label = "green:client";
+ gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ router_red {
+ label = "red:router";
+ gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ router_green {
+ label = "green:router";
+ gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "WPS button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ extender_apmode {
+ label = "EXTENDER/APMODE switch";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uboot: partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ caldata: partition@50000 {
+ label = "caldata";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "caldata-backup";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ label = "config";
+ reg = <0x070000 0x010000>;
+ };
+
+ partition@80000 {
+ label = "pot";
+ reg = <0x080000 0x010000>;
+ };
+
+ partition@90000 {
+ label = "firmware";
+ reg = <0x090000 0xf30000>;
+ compatible = "denx,uimage";
+ };
+
+ partition@fc0000 {
+ label = "language";
+ reg = <0xfc0000 0x040000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&caldata 0x1000>;
+ nvmem-cells = <&macaddr_caldata_6>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ nvmem-cells = <&macaddr_caldata_0>;
+ nvmem-cell-names = "mac-address";
+
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii-rxid";
+
+ pll-data = <0x86000000 0x80000101 0x80001313>;
+};
+
+&caldata {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_caldata_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+
+ macaddr_caldata_6: macaddr@6 {
+ reg = <0x6 0x6>;
+ };
};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qca955x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- aliases {
- led-boot = &led_power_green;
- led-failsafe = &led_power_amber;
- led-running = &led_power_green;
- led-upgrade = &led_power_amber;
- label-mac-device = ð0;
- };
-
- led_spi {
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
- num-chipselects = <0>;
-
- led_gpio: led_gpio@0 {
- compatible = "nxp,74lvc594";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <1>;
- spi-max-frequency = <500000>;
-
- gpio_latch_bit {
- gpio-hog;
- gpios = <4 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "gpio-latch-bit";
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_green: power_green {
- label = "green:power";
- gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- };
-
- led_power_amber: power_amber {
- label = "amber:power";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
-
- left_blue {
- label = "blue:left";
- gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
- };
-
- right_blue {
- label = "blue:right";
- gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
- };
-
- wps_green {
- label = "green:wps";
- gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
- };
-
- client_red {
- label = "red:client";
- gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
- };
-
- client_green {
- label = "green:client";
- gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
- };
-
- router_red {
- label = "red:router";
- gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
- };
-
- router_green {
- label = "green:router";
- gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "Reset button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "WPS button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- extender_apmode {
- label = "EXTENDER/APMODE switch";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&spi {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- uboot: partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- caldata: partition@50000 {
- label = "caldata";
- reg = <0x050000 0x010000>;
- read-only;
- };
-
- partition@60000 {
- label = "caldata-backup";
- reg = <0x060000 0x010000>;
- read-only;
- };
-
- partition@70000 {
- label = "config";
- reg = <0x070000 0x010000>;
- };
-
- partition@80000 {
- label = "pot";
- reg = <0x080000 0x010000>;
- };
-
- partition@90000 {
- label = "firmware";
- reg = <0x090000 0xf30000>;
- compatible = "denx,uimage";
- };
-
- partition@fc0000 {
- label = "language";
- reg = <0xfc0000 0x040000>;
- };
- };
- };
-};
-
-&wmac {
- status = "okay";
-
- mtd-cal-data = <&caldata 0x1000>;
- nvmem-cells = <&macaddr_caldata_6>;
- nvmem-cell-names = "mac-address";
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-};
-
-ð0 {
- status = "okay";
-
- nvmem-cells = <&macaddr_caldata_0>;
- nvmem-cell-names = "mac-address";
-
- phy-handle = <&phy4>;
- phy-mode = "rgmii-rxid";
-
- pll-data = <0x86000000 0x80000101 0x80001313>;
-};
-
-&caldata {
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_caldata_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_caldata_6: macaddr@6 {
- reg = <0x6 0x6>;
- };
-};
glinet,gl-usb150|\
hak5,wifi-pineapple-nano|\
meraki,mr16|\
- netgear,ex6400|\
netgear,ex7300|\
netgear,ex7300-v2|\
netgear,wndap360|\
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
- netgear,ex6400|\
netgear,ex7300)
caldata_extract "caldata" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
--- /dev/null
+. /lib/functions.sh
+
+do_sysinfo_ath79_fixup() {
+ local model=""
+
+ case $(board_name) in
+ netgear,ex7300)
+ local part=$(find_mtd_part caldata)
+ local board_hw_id=$(dd if=$part bs=1 skip=67 count=10 2>/dev/null)
+ case "$board_hw_id" in
+ 5508013406)
+ model="Netgear EX6400"
+ ;;
+ 5508013271)
+ model="Netgear EX7300"
+ ;;
+ esac
+ ;;
+ netgear,ex7300-v2)
+ local part=$(find_mtd_part artmtd)
+ local antenna_cfg=$(dd if=$part bs=1 skip=59 count=7 2>/dev/null)
+ local board_hw_id=$(dd if=$part bs=1 skip=67 count=6 2>/dev/null)
+ case "$antenna_cfg" in
+ 3X3+3X3)
+ model="Netgear EX6250"
+ ;;
+ 3X3+4X4)
+ # EX6400 v2, EX6410, EX6420
+ model="Netgear ${board_hw_id:-EX6400 v2}"
+ ;;
+ 4X4+4X4)
+ # EX7300 v2, EX7320
+ model="Netgear ${board_hw_id:-EX7300 v2}"
+ ;;
+ esac
+ ;;
+ esac
+
+ [ -n "$model" ] && echo "$model" > /tmp/sysinfo/model
+}
+
+boot_hook_add preinit_main do_sysinfo_ath79_fixup
endef
TARGET_DEVICES += nec_wg800hp
-define Device/netgear_ex6400_ex7300
- $(Device/netgear_generic)
+define Device/netgear_ex7300
SOC := qca9558
- UIMAGE_MAGIC := 0x27051956
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := EX7300
+ DEVICE_ALT0_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := EX6400
NETGEAR_BOARD_ID := EX7300series
NETGEAR_HW_ID := 29765104+16+0+128
IMAGE_SIZE := 15552k
+ IMAGES += factory.img
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
netgear-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca99x0-ct
-endef
-
-define Device/netgear_ex6400
- $(Device/netgear_ex6400_ex7300)
- DEVICE_MODEL := EX6400
-endef
-TARGET_DEVICES += netgear_ex6400
-
-define Device/netgear_ex7300
- $(Device/netgear_ex6400_ex7300)
- DEVICE_MODEL := EX7300
+ SUPPORTED_DEVICES += netgear,ex6400
endef
TARGET_DEVICES += netgear_ex7300
define Device/netgear_ex7300-v2
- $(Device/netgear_generic)
SOC := qcn5502
+ DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := EX7300
DEVICE_VARIANT := v2
- UIMAGE_MAGIC := 0x27051956
+ DEVICE_ALT0_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := EX6250
+ DEVICE_ALT1_VENDOR := NETGEAR
+ DEVICE_ALT1_MODEL := EX6400
+ DEVICE_ALT1_VARIANT := v2
+ DEVICE_ALT2_VENDOR := NETGEAR
+ DEVICE_ALT2_MODEL := EX6410
+ DEVICE_ALT3_VENDOR := NETGEAR
+ DEVICE_ALT3_MODEL := EX6420
+ DEVICE_ALT4_VENDOR := NETGEAR
+ DEVICE_ALT4_MODEL := EX7320
NETGEAR_BOARD_ID := EX7300v2series
NETGEAR_HW_ID := 29765907+16+0+128
IMAGE_SIZE := 14528k
+ IMAGES += factory.img
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | \
netgear-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
projects / openwrt / openwrt.git / commitdiff