--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
-@@ -371,6 +371,8 @@ source "drivers/mtd/onenand/Kconfig"
+@@ -366,6 +366,8 @@ source "drivers/mtd/onenand/Kconfig"
source "drivers/mtd/lpddr/Kconfig"
endif # MTD
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
-@@ -39,4 +39,5 @@ inftl-objs := inftlcore.o inftlmount.o
+@@ -35,4 +35,5 @@ inftl-objs := inftlcore.o inftlmount.o
obj-y += chips/ lpddr/ maps/ devices/ nand/ onenand/ tests/
--- /dev/null
+From 140bd60383309e82b5cae3294a907c11a0a12b90 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 14 Sep 2014 21:43:40 +0200
+Subject: [PATCH] ARM: BCM5301X: fix early serial console
+
+This device actually has a 8250 serial with a shift of 0.
+Tested this on a BCM4708.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+---
+ arch/arm/Kconfig.debug | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
+index 1c4889d..a528843 100644
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -109,7 +109,7 @@ choice
+ config DEBUG_BCM_5301X
+ bool "Kernel low-level debugging on BCM5301X UART1"
+ depends on ARCH_BCM_5301X
+- select DEBUG_UART_PL01X
++ select DEBUG_UART_8250
+
+ config DEBUG_BCM_KONA_UART
+ bool "Kernel low-level debugging messages via BCM KONA UART"
+@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT
+ config DEBUG_UART_8250_SHIFT
+ int "Register offset shift for the 8250 debug UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+- default 0 if FOOTBRIDGE || ARCH_IOP32X
++ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
+ default 2
+
+ config DEBUG_UART_8250_WORD
+--
+1.8.4.5
+
index 91bd5bd..ff4a5ae 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
+@@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm1135
+ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
+++ /dev/null
-From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 14 Sep 2014 21:02:35 +0200
-Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console
-
-This device actually has a 8250 serial with a shift of 0.
-Tested this on a BCM4708.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/Kconfig.debug | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -109,7 +109,7 @@ choice
- config DEBUG_BCM_5301X
- bool "Kernel low-level debugging on BCM5301X UART1"
- depends on ARCH_BCM_5301X
-- select DEBUG_UART_PL01X
-+ select DEBUG_UART_8250
-
- config DEBUG_BCM_KONA_UART
- bool "Kernel low-level debugging messages via BCM KONA UART"
-@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT
- config DEBUG_UART_8250_SHIFT
- int "Register offset shift for the 8250 debug UART"
- depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-- default 0 if FOOTBRIDGE || ARCH_IOP32X
-+ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
- default 2
-
- config DEBUG_UART_8250_WORD
--- /dev/null
+From 140bd60383309e82b5cae3294a907c11a0a12b90 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 14 Sep 2014 21:43:40 +0200
+Subject: [PATCH] ARM: BCM5301X: fix early serial console
+
+This device actually has a 8250 serial with a shift of 0.
+Tested this on a BCM4708.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+---
+ arch/arm/Kconfig.debug | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
+index 1c4889d..a528843 100644
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -113,7 +113,7 @@ choice
+ config DEBUG_BCM_5301X
+ bool "Kernel low-level debugging on BCM5301X UART1"
+ depends on ARCH_BCM_5301X
+- select DEBUG_UART_PL01X
++ select DEBUG_UART_8250
+
+ config DEBUG_BCM_KONA_UART
+ bool "Kernel low-level debugging messages via BCM KONA UART"
+@@ -1249,7 +1249,7 @@ config DEBUG_UART_VIRT
+ config DEBUG_UART_8250_SHIFT
+ int "Register offset shift for the 8250 debug UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+- default 0 if FOOTBRIDGE || ARCH_IOP32X
++ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
+ default 2
+
+ config DEBUG_UART_8250_WORD
+--
+1.8.4.5
+
index 91bd5bd..ff4a5ae 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
+@@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amar
+ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
index 4733d32..ab18030 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -2286,6 +2286,8 @@ source "net/Kconfig"
+@@ -2166,6 +2166,8 @@ source "net/Kconfig"
source "drivers/Kconfig"
+++ /dev/null
-From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 14 Sep 2014 21:02:35 +0200
-Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console
-
-This device actually has a 8250 serial with a shift of 0.
-Tested this on a BCM4708.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/Kconfig.debug | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -113,7 +113,7 @@ choice
- config DEBUG_BCM_5301X
- bool "Kernel low-level debugging on BCM5301X UART1"
- depends on ARCH_BCM_5301X
-- select DEBUG_UART_PL01X
-+ select DEBUG_UART_8250
-
- config DEBUG_BCM_KONA_UART
- bool "Kernel low-level debugging messages via BCM KONA UART"
-@@ -1249,7 +1249,7 @@ config DEBUG_UART_VIRT
- config DEBUG_UART_8250_SHIFT
- int "Register offset shift for the 8250 debug UART"
- depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-- default 0 if FOOTBRIDGE || ARCH_IOP32X
-+ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
- default 2
-
- config DEBUG_UART_8250_WORD