obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
-obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek.o
-realtek-objs := realtek-smi.o rtl8366.o rtl8366rb.o
+obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek-smi.o
+realtek-smi-objs := realtek-smi-core.o rtl8366.o rtl8366rb.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Realtek Simple Management Interface (SMI) driver
+ * It can be discussed how "simple" this interface is.
+ *
+ * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels
+ * but the protocol is not MDIO at all. Instead it is a Realtek
+ * pecularity that need to bit-bang the lines in a special way to
+ * communicate with the switch.
+ *
+ * ASICs we intend to support with this driver:
+ *
+ * RTL8366 - The original version, apparently
+ * RTL8369 - Similar enough to have the same datsheet as RTL8366
+ * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
+ * different register layout from the other two
+ * RTL8366S - Is this "RTL8366 super"?
+ * RTL8367 - Has an OpenWRT driver as well
+ * RTL8368S - Seems to be an alternative name for RTL8366RB
+ * RTL8370 - Also uses SMI
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
+ * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+#include <linux/if_bridge.h>
+
+#include "realtek-smi-core.h"
+
+#define REALTEK_SMI_ACK_RETRY_COUNT 5
+#define REALTEK_SMI_HW_STOP_DELAY 25 /* msecs */
+#define REALTEK_SMI_HW_START_DELAY 100 /* msecs */
+
+static inline void realtek_smi_clk_delay(struct realtek_smi *smi)
+{
+ ndelay(smi->clk_delay);
+}
+
+static void realtek_smi_start(struct realtek_smi *smi)
+{
+ /* Set GPIO pins to output mode, with initial state:
+ * SCK = 0, SDA = 1
+ */
+ gpiod_direction_output(smi->mdc, 0);
+ gpiod_direction_output(smi->mdio, 1);
+ realtek_smi_clk_delay(smi);
+
+ /* CLK 1: 0 -> 1, 1 -> 0 */
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ realtek_smi_clk_delay(smi);
+
+ /* CLK 2: */
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdio, 0);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdio, 1);
+}
+
+static void realtek_smi_stop(struct realtek_smi *smi)
+{
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdio, 0);
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdio, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 1);
+
+ /* Add a click */
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 1);
+
+ /* Set GPIO pins to input mode */
+ gpiod_direction_input(smi->mdio);
+ gpiod_direction_input(smi->mdc);
+}
+
+static void realtek_smi_write_bits(struct realtek_smi *smi, u32 data, u32 len)
+{
+ for (; len > 0; len--) {
+ realtek_smi_clk_delay(smi);
+
+ /* Prepare data */
+ gpiod_set_value(smi->mdio, !!(data & (1 << (len - 1))));
+ realtek_smi_clk_delay(smi);
+
+ /* Clocking */
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ gpiod_set_value(smi->mdc, 0);
+ }
+}
+
+static void realtek_smi_read_bits(struct realtek_smi *smi, u32 len, u32 *data)
+{
+ gpiod_direction_input(smi->mdio);
+
+ for (*data = 0; len > 0; len--) {
+ u32 u;
+
+ realtek_smi_clk_delay(smi);
+
+ /* Clocking */
+ gpiod_set_value(smi->mdc, 1);
+ realtek_smi_clk_delay(smi);
+ u = !!gpiod_get_value(smi->mdio);
+ gpiod_set_value(smi->mdc, 0);
+
+ *data |= (u << (len - 1));
+ }
+
+ gpiod_direction_output(smi->mdio, 0);
+}
+
+static int realtek_smi_wait_for_ack(struct realtek_smi *smi)
+{
+ int retry_cnt;
+
+ retry_cnt = 0;
+ do {
+ u32 ack;
+
+ realtek_smi_read_bits(smi, 1, &ack);
+ if (ack == 0)
+ break;
+
+ if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) {
+ dev_err(smi->dev, "ACK timeout\n");
+ return -ETIMEDOUT;
+ }
+ } while (1);
+
+ return 0;
+}
+
+static int realtek_smi_write_byte(struct realtek_smi *smi, u8 data)
+{
+ realtek_smi_write_bits(smi, data, 8);
+ return realtek_smi_wait_for_ack(smi);
+}
+
+static int realtek_smi_write_byte_noack(struct realtek_smi *smi, u8 data)
+{
+ realtek_smi_write_bits(smi, data, 8);
+ return 0;
+}
+
+static int realtek_smi_read_byte0(struct realtek_smi *smi, u8 *data)
+{
+ u32 t;
+
+ /* Read data */
+ realtek_smi_read_bits(smi, 8, &t);
+ *data = (t & 0xff);
+
+ /* Send an ACK */
+ realtek_smi_write_bits(smi, 0x00, 1);
+
+ return 0;
+}
+
+static int realtek_smi_read_byte1(struct realtek_smi *smi, u8 *data)
+{
+ u32 t;
+
+ /* Read data */
+ realtek_smi_read_bits(smi, 8, &t);
+ *data = (t & 0xff);
+
+ /* Send an ACK */
+ realtek_smi_write_bits(smi, 0x01, 1);
+
+ return 0;
+}
+
+static int realtek_smi_read_reg(struct realtek_smi *smi, u32 addr, u32 *data)
+{
+ unsigned long flags;
+ u8 lo = 0;
+ u8 hi = 0;
+ int ret;
+
+ spin_lock_irqsave(&smi->lock, flags);
+
+ realtek_smi_start(smi);
+
+ /* Send READ command */
+ ret = realtek_smi_write_byte(smi, smi->cmd_read);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[7:0] */
+ ret = realtek_smi_write_byte(smi, addr & 0xff);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[15:8] */
+ ret = realtek_smi_write_byte(smi, addr >> 8);
+ if (ret)
+ goto out;
+
+ /* Read DATA[7:0] */
+ realtek_smi_read_byte0(smi, &lo);
+ /* Read DATA[15:8] */
+ realtek_smi_read_byte1(smi, &hi);
+
+ *data = ((u32)lo) | (((u32)hi) << 8);
+
+ ret = 0;
+
+ out:
+ realtek_smi_stop(smi);
+ spin_unlock_irqrestore(&smi->lock, flags);
+
+ return ret;
+}
+
+static int realtek_smi_write_reg(struct realtek_smi *smi,
+ u32 addr, u32 data, bool ack)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&smi->lock, flags);
+
+ realtek_smi_start(smi);
+
+ /* Send WRITE command */
+ ret = realtek_smi_write_byte(smi, smi->cmd_write);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[7:0] */
+ ret = realtek_smi_write_byte(smi, addr & 0xff);
+ if (ret)
+ goto out;
+
+ /* Set ADDR[15:8] */
+ ret = realtek_smi_write_byte(smi, addr >> 8);
+ if (ret)
+ goto out;
+
+ /* Write DATA[7:0] */
+ ret = realtek_smi_write_byte(smi, data & 0xff);
+ if (ret)
+ goto out;
+
+ /* Write DATA[15:8] */
+ if (ack)
+ ret = realtek_smi_write_byte(smi, data >> 8);
+ else
+ ret = realtek_smi_write_byte_noack(smi, data >> 8);
+ if (ret)
+ goto out;
+
+ ret = 0;
+
+ out:
+ realtek_smi_stop(smi);
+ spin_unlock_irqrestore(&smi->lock, flags);
+
+ return ret;
+}
+
+/* There is one single case when we need to use this accessor and that
+ * is when issueing soft reset. Since the device reset as soon as we write
+ * that bit, no ACK will come back for natural reasons.
+ */
+int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
+ u32 data)
+{
+ return realtek_smi_write_reg(smi, addr, data, false);
+}
+EXPORT_SYMBOL_GPL(realtek_smi_write_reg_noack);
+
+/* Regmap accessors */
+
+static int realtek_smi_write(void *ctx, u32 reg, u32 val)
+{
+ struct realtek_smi *smi = ctx;
+
+ return realtek_smi_write_reg(smi, reg, val, true);
+}
+
+static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
+{
+ struct realtek_smi *smi = ctx;
+
+ return realtek_smi_read_reg(smi, reg, val);
+}
+
+static const struct regmap_config realtek_smi_mdio_regmap_config = {
+ .reg_bits = 10, /* A4..A0 R4..R0 */
+ .val_bits = 16,
+ .reg_stride = 1,
+ /* PHY regs are at 0x8000 */
+ .max_register = 0xffff,
+ .reg_format_endian = REGMAP_ENDIAN_BIG,
+ .reg_read = realtek_smi_read,
+ .reg_write = realtek_smi_write,
+ .cache_type = REGCACHE_NONE,
+};
+
+static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct realtek_smi *smi = bus->priv;
+
+ return smi->ops->phy_read(smi, addr, regnum);
+}
+
+static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ struct realtek_smi *smi = bus->priv;
+
+ return smi->ops->phy_write(smi, addr, regnum, val);
+}
+
+int realtek_smi_setup_mdio(struct realtek_smi *smi)
+{
+ struct device_node *mdio_np;
+ int ret;
+
+ mdio_np = of_get_compatible_child(smi->dev->of_node, "realtek,smi-mdio");
+ if (!mdio_np) {
+ dev_err(smi->dev, "no MDIO bus node\n");
+ return -ENODEV;
+ }
+
+ smi->slave_mii_bus = devm_mdiobus_alloc(smi->dev);
+ if (!smi->slave_mii_bus) {
+ ret = -ENOMEM;
+ goto err_put_node;
+ }
+ smi->slave_mii_bus->priv = smi;
+ smi->slave_mii_bus->name = "SMI slave MII";
+ smi->slave_mii_bus->read = realtek_smi_mdio_read;
+ smi->slave_mii_bus->write = realtek_smi_mdio_write;
+ snprintf(smi->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
+ smi->ds->index);
+ smi->slave_mii_bus->dev.of_node = mdio_np;
+ smi->slave_mii_bus->parent = smi->dev;
+ smi->ds->slave_mii_bus = smi->slave_mii_bus;
+
+ ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np);
+ if (ret) {
+ dev_err(smi->dev, "unable to register MDIO bus %s\n",
+ smi->slave_mii_bus->id);
+ goto err_put_node;
+ }
+
+ return 0;
+
+err_put_node:
+ of_node_put(mdio_np);
+
+ return ret;
+}
+
+static int realtek_smi_probe(struct platform_device *pdev)
+{
+ const struct realtek_smi_variant *var;
+ struct device *dev = &pdev->dev;
+ struct realtek_smi *smi;
+ struct device_node *np;
+ int ret;
+
+ var = of_device_get_match_data(dev);
+ np = dev->of_node;
+
+ smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL);
+ if (!smi)
+ return -ENOMEM;
+ smi->map = devm_regmap_init(dev, NULL, smi,
+ &realtek_smi_mdio_regmap_config);
+ if (IS_ERR(smi->map)) {
+ ret = PTR_ERR(smi->map);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Link forward and backward */
+ smi->dev = dev;
+ smi->clk_delay = var->clk_delay;
+ smi->cmd_read = var->cmd_read;
+ smi->cmd_write = var->cmd_write;
+ smi->ops = var->ops;
+
+ dev_set_drvdata(dev, smi);
+ spin_lock_init(&smi->lock);
+
+ /* TODO: if power is software controlled, set up any regulators here */
+
+ /* Assert then deassert RESET */
+ smi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(smi->reset)) {
+ dev_err(dev, "failed to get RESET GPIO\n");
+ return PTR_ERR(smi->reset);
+ }
+ msleep(REALTEK_SMI_HW_STOP_DELAY);
+ gpiod_set_value(smi->reset, 0);
+ msleep(REALTEK_SMI_HW_START_DELAY);
+ dev_info(dev, "deasserted RESET\n");
+
+ /* Fetch MDIO pins */
+ smi->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
+ if (IS_ERR(smi->mdc))
+ return PTR_ERR(smi->mdc);
+ smi->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
+ if (IS_ERR(smi->mdio))
+ return PTR_ERR(smi->mdio);
+
+ smi->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
+
+ ret = smi->ops->detect(smi);
+ if (ret) {
+ dev_err(dev, "unable to detect switch\n");
+ return ret;
+ }
+
+ smi->ds = dsa_switch_alloc(dev, smi->num_ports);
+ if (!smi->ds)
+ return -ENOMEM;
+ smi->ds->priv = smi;
+
+ smi->ds->ops = var->ds_ops;
+ ret = dsa_register_switch(smi->ds);
+ if (ret) {
+ dev_err(dev, "unable to register switch ret = %d\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int realtek_smi_remove(struct platform_device *pdev)
+{
+ struct realtek_smi *smi = dev_get_drvdata(&pdev->dev);
+
+ dsa_unregister_switch(smi->ds);
+ if (smi->slave_mii_bus)
+ of_node_put(smi->slave_mii_bus->dev.of_node);
+ gpiod_set_value(smi->reset, 1);
+
+ return 0;
+}
+
+static const struct of_device_id realtek_smi_of_match[] = {
+ {
+ .compatible = "realtek,rtl8366rb",
+ .data = &rtl8366rb_variant,
+ },
+ {
+ /* FIXME: add support for RTL8366S and more */
+ .compatible = "realtek,rtl8366s",
+ .data = NULL,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, realtek_smi_of_match);
+
+static struct platform_driver realtek_smi_driver = {
+ .driver = {
+ .name = "realtek-smi",
+ .of_match_table = of_match_ptr(realtek_smi_of_match),
+ },
+ .probe = realtek_smi_probe,
+ .remove = realtek_smi_remove,
+};
+module_platform_driver(realtek_smi_driver);
+
+MODULE_LICENSE("GPL");
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Realtek SMI interface driver defines
+ *
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#ifndef _REALTEK_SMI_H
+#define _REALTEK_SMI_H
+
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <net/dsa.h>
+
+struct realtek_smi_ops;
+struct dentry;
+struct inode;
+struct file;
+
+struct rtl8366_mib_counter {
+ unsigned int base;
+ unsigned int offset;
+ unsigned int length;
+ const char *name;
+};
+
+struct rtl8366_vlan_mc {
+ u16 vid;
+ u16 untag;
+ u16 member;
+ u8 fid;
+ u8 priority;
+};
+
+struct rtl8366_vlan_4k {
+ u16 vid;
+ u16 untag;
+ u16 member;
+ u8 fid;
+};
+
+struct realtek_smi {
+ struct device *dev;
+ struct gpio_desc *reset;
+ struct gpio_desc *mdc;
+ struct gpio_desc *mdio;
+ struct regmap *map;
+ struct mii_bus *slave_mii_bus;
+
+ unsigned int clk_delay;
+ u8 cmd_read;
+ u8 cmd_write;
+ spinlock_t lock; /* Locks around command writes */
+ struct dsa_switch *ds;
+ struct irq_domain *irqdomain;
+ bool leds_disabled;
+
+ unsigned int cpu_port;
+ unsigned int num_ports;
+ unsigned int num_vlan_mc;
+ unsigned int num_mib_counters;
+ struct rtl8366_mib_counter *mib_counters;
+
+ const struct realtek_smi_ops *ops;
+
+ int vlan_enabled;
+ int vlan4k_enabled;
+
+ char buf[4096];
+};
+
+/**
+ * struct realtek_smi_ops - vtable for the per-SMI-chiptype operations
+ * @detect: detects the chiptype
+ */
+struct realtek_smi_ops {
+ int (*detect)(struct realtek_smi *smi);
+ int (*reset_chip)(struct realtek_smi *smi);
+ int (*setup)(struct realtek_smi *smi);
+ void (*cleanup)(struct realtek_smi *smi);
+ int (*get_mib_counter)(struct realtek_smi *smi,
+ int port,
+ struct rtl8366_mib_counter *mib,
+ u64 *mibvalue);
+ int (*get_vlan_mc)(struct realtek_smi *smi, u32 index,
+ struct rtl8366_vlan_mc *vlanmc);
+ int (*set_vlan_mc)(struct realtek_smi *smi, u32 index,
+ const struct rtl8366_vlan_mc *vlanmc);
+ int (*get_vlan_4k)(struct realtek_smi *smi, u32 vid,
+ struct rtl8366_vlan_4k *vlan4k);
+ int (*set_vlan_4k)(struct realtek_smi *smi,
+ const struct rtl8366_vlan_4k *vlan4k);
+ int (*get_mc_index)(struct realtek_smi *smi, int port, int *val);
+ int (*set_mc_index)(struct realtek_smi *smi, int port, int index);
+ bool (*is_vlan_valid)(struct realtek_smi *smi, unsigned int vlan);
+ int (*enable_vlan)(struct realtek_smi *smi, bool enable);
+ int (*enable_vlan4k)(struct realtek_smi *smi, bool enable);
+ int (*enable_port)(struct realtek_smi *smi, int port, bool enable);
+ int (*phy_read)(struct realtek_smi *smi, int phy, int regnum);
+ int (*phy_write)(struct realtek_smi *smi, int phy, int regnum,
+ u16 val);
+};
+
+struct realtek_smi_variant {
+ const struct dsa_switch_ops *ds_ops;
+ const struct realtek_smi_ops *ops;
+ unsigned int clk_delay;
+ u8 cmd_read;
+ u8 cmd_write;
+};
+
+/* SMI core calls */
+int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
+ u32 data);
+int realtek_smi_setup_mdio(struct realtek_smi *smi);
+
+/* RTL8366 library helpers */
+int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used);
+int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
+ u32 untag, u32 fid);
+int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val);
+int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
+ unsigned int vid);
+int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
+int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
+int rtl8366_reset_vlan(struct realtek_smi *smi);
+int rtl8366_init_vlan(struct realtek_smi *smi);
+int rtl8366_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering);
+int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+void rtl8366_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+int rtl8366_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data);
+int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset);
+void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
+
+extern const struct realtek_smi_variant rtl8366rb_variant;
+
+#endif /* _REALTEK_SMI_H */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/* Realtek Simple Management Interface (SMI) driver
- * It can be discussed how "simple" this interface is.
- *
- * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels
- * but the protocol is not MDIO at all. Instead it is a Realtek
- * pecularity that need to bit-bang the lines in a special way to
- * communicate with the switch.
- *
- * ASICs we intend to support with this driver:
- *
- * RTL8366 - The original version, apparently
- * RTL8369 - Similar enough to have the same datsheet as RTL8366
- * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite
- * different register layout from the other two
- * RTL8366S - Is this "RTL8366 super"?
- * RTL8367 - Has an OpenWRT driver as well
- * RTL8368S - Seems to be an alternative name for RTL8366RB
- * RTL8370 - Also uses SMI
- *
- * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
- * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
- * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
- * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com>
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/skbuff.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_mdio.h>
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/bitops.h>
-#include <linux/if_bridge.h>
-
-#include "realtek-smi.h"
-
-#define REALTEK_SMI_ACK_RETRY_COUNT 5
-#define REALTEK_SMI_HW_STOP_DELAY 25 /* msecs */
-#define REALTEK_SMI_HW_START_DELAY 100 /* msecs */
-
-static inline void realtek_smi_clk_delay(struct realtek_smi *smi)
-{
- ndelay(smi->clk_delay);
-}
-
-static void realtek_smi_start(struct realtek_smi *smi)
-{
- /* Set GPIO pins to output mode, with initial state:
- * SCK = 0, SDA = 1
- */
- gpiod_direction_output(smi->mdc, 0);
- gpiod_direction_output(smi->mdio, 1);
- realtek_smi_clk_delay(smi);
-
- /* CLK 1: 0 -> 1, 1 -> 0 */
- gpiod_set_value(smi->mdc, 1);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdc, 0);
- realtek_smi_clk_delay(smi);
-
- /* CLK 2: */
- gpiod_set_value(smi->mdc, 1);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdio, 0);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdc, 0);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdio, 1);
-}
-
-static void realtek_smi_stop(struct realtek_smi *smi)
-{
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdio, 0);
- gpiod_set_value(smi->mdc, 1);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdio, 1);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdc, 1);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdc, 0);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdc, 1);
-
- /* Add a click */
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdc, 0);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdc, 1);
-
- /* Set GPIO pins to input mode */
- gpiod_direction_input(smi->mdio);
- gpiod_direction_input(smi->mdc);
-}
-
-static void realtek_smi_write_bits(struct realtek_smi *smi, u32 data, u32 len)
-{
- for (; len > 0; len--) {
- realtek_smi_clk_delay(smi);
-
- /* Prepare data */
- gpiod_set_value(smi->mdio, !!(data & (1 << (len - 1))));
- realtek_smi_clk_delay(smi);
-
- /* Clocking */
- gpiod_set_value(smi->mdc, 1);
- realtek_smi_clk_delay(smi);
- gpiod_set_value(smi->mdc, 0);
- }
-}
-
-static void realtek_smi_read_bits(struct realtek_smi *smi, u32 len, u32 *data)
-{
- gpiod_direction_input(smi->mdio);
-
- for (*data = 0; len > 0; len--) {
- u32 u;
-
- realtek_smi_clk_delay(smi);
-
- /* Clocking */
- gpiod_set_value(smi->mdc, 1);
- realtek_smi_clk_delay(smi);
- u = !!gpiod_get_value(smi->mdio);
- gpiod_set_value(smi->mdc, 0);
-
- *data |= (u << (len - 1));
- }
-
- gpiod_direction_output(smi->mdio, 0);
-}
-
-static int realtek_smi_wait_for_ack(struct realtek_smi *smi)
-{
- int retry_cnt;
-
- retry_cnt = 0;
- do {
- u32 ack;
-
- realtek_smi_read_bits(smi, 1, &ack);
- if (ack == 0)
- break;
-
- if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) {
- dev_err(smi->dev, "ACK timeout\n");
- return -ETIMEDOUT;
- }
- } while (1);
-
- return 0;
-}
-
-static int realtek_smi_write_byte(struct realtek_smi *smi, u8 data)
-{
- realtek_smi_write_bits(smi, data, 8);
- return realtek_smi_wait_for_ack(smi);
-}
-
-static int realtek_smi_write_byte_noack(struct realtek_smi *smi, u8 data)
-{
- realtek_smi_write_bits(smi, data, 8);
- return 0;
-}
-
-static int realtek_smi_read_byte0(struct realtek_smi *smi, u8 *data)
-{
- u32 t;
-
- /* Read data */
- realtek_smi_read_bits(smi, 8, &t);
- *data = (t & 0xff);
-
- /* Send an ACK */
- realtek_smi_write_bits(smi, 0x00, 1);
-
- return 0;
-}
-
-static int realtek_smi_read_byte1(struct realtek_smi *smi, u8 *data)
-{
- u32 t;
-
- /* Read data */
- realtek_smi_read_bits(smi, 8, &t);
- *data = (t & 0xff);
-
- /* Send an ACK */
- realtek_smi_write_bits(smi, 0x01, 1);
-
- return 0;
-}
-
-static int realtek_smi_read_reg(struct realtek_smi *smi, u32 addr, u32 *data)
-{
- unsigned long flags;
- u8 lo = 0;
- u8 hi = 0;
- int ret;
-
- spin_lock_irqsave(&smi->lock, flags);
-
- realtek_smi_start(smi);
-
- /* Send READ command */
- ret = realtek_smi_write_byte(smi, smi->cmd_read);
- if (ret)
- goto out;
-
- /* Set ADDR[7:0] */
- ret = realtek_smi_write_byte(smi, addr & 0xff);
- if (ret)
- goto out;
-
- /* Set ADDR[15:8] */
- ret = realtek_smi_write_byte(smi, addr >> 8);
- if (ret)
- goto out;
-
- /* Read DATA[7:0] */
- realtek_smi_read_byte0(smi, &lo);
- /* Read DATA[15:8] */
- realtek_smi_read_byte1(smi, &hi);
-
- *data = ((u32)lo) | (((u32)hi) << 8);
-
- ret = 0;
-
- out:
- realtek_smi_stop(smi);
- spin_unlock_irqrestore(&smi->lock, flags);
-
- return ret;
-}
-
-static int realtek_smi_write_reg(struct realtek_smi *smi,
- u32 addr, u32 data, bool ack)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&smi->lock, flags);
-
- realtek_smi_start(smi);
-
- /* Send WRITE command */
- ret = realtek_smi_write_byte(smi, smi->cmd_write);
- if (ret)
- goto out;
-
- /* Set ADDR[7:0] */
- ret = realtek_smi_write_byte(smi, addr & 0xff);
- if (ret)
- goto out;
-
- /* Set ADDR[15:8] */
- ret = realtek_smi_write_byte(smi, addr >> 8);
- if (ret)
- goto out;
-
- /* Write DATA[7:0] */
- ret = realtek_smi_write_byte(smi, data & 0xff);
- if (ret)
- goto out;
-
- /* Write DATA[15:8] */
- if (ack)
- ret = realtek_smi_write_byte(smi, data >> 8);
- else
- ret = realtek_smi_write_byte_noack(smi, data >> 8);
- if (ret)
- goto out;
-
- ret = 0;
-
- out:
- realtek_smi_stop(smi);
- spin_unlock_irqrestore(&smi->lock, flags);
-
- return ret;
-}
-
-/* There is one single case when we need to use this accessor and that
- * is when issueing soft reset. Since the device reset as soon as we write
- * that bit, no ACK will come back for natural reasons.
- */
-int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
- u32 data)
-{
- return realtek_smi_write_reg(smi, addr, data, false);
-}
-EXPORT_SYMBOL_GPL(realtek_smi_write_reg_noack);
-
-/* Regmap accessors */
-
-static int realtek_smi_write(void *ctx, u32 reg, u32 val)
-{
- struct realtek_smi *smi = ctx;
-
- return realtek_smi_write_reg(smi, reg, val, true);
-}
-
-static int realtek_smi_read(void *ctx, u32 reg, u32 *val)
-{
- struct realtek_smi *smi = ctx;
-
- return realtek_smi_read_reg(smi, reg, val);
-}
-
-static const struct regmap_config realtek_smi_mdio_regmap_config = {
- .reg_bits = 10, /* A4..A0 R4..R0 */
- .val_bits = 16,
- .reg_stride = 1,
- /* PHY regs are at 0x8000 */
- .max_register = 0xffff,
- .reg_format_endian = REGMAP_ENDIAN_BIG,
- .reg_read = realtek_smi_read,
- .reg_write = realtek_smi_write,
- .cache_type = REGCACHE_NONE,
-};
-
-static int realtek_smi_mdio_read(struct mii_bus *bus, int addr, int regnum)
-{
- struct realtek_smi *smi = bus->priv;
-
- return smi->ops->phy_read(smi, addr, regnum);
-}
-
-static int realtek_smi_mdio_write(struct mii_bus *bus, int addr, int regnum,
- u16 val)
-{
- struct realtek_smi *smi = bus->priv;
-
- return smi->ops->phy_write(smi, addr, regnum, val);
-}
-
-int realtek_smi_setup_mdio(struct realtek_smi *smi)
-{
- struct device_node *mdio_np;
- int ret;
-
- mdio_np = of_get_compatible_child(smi->dev->of_node, "realtek,smi-mdio");
- if (!mdio_np) {
- dev_err(smi->dev, "no MDIO bus node\n");
- return -ENODEV;
- }
-
- smi->slave_mii_bus = devm_mdiobus_alloc(smi->dev);
- if (!smi->slave_mii_bus) {
- ret = -ENOMEM;
- goto err_put_node;
- }
- smi->slave_mii_bus->priv = smi;
- smi->slave_mii_bus->name = "SMI slave MII";
- smi->slave_mii_bus->read = realtek_smi_mdio_read;
- smi->slave_mii_bus->write = realtek_smi_mdio_write;
- snprintf(smi->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
- smi->ds->index);
- smi->slave_mii_bus->dev.of_node = mdio_np;
- smi->slave_mii_bus->parent = smi->dev;
- smi->ds->slave_mii_bus = smi->slave_mii_bus;
-
- ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np);
- if (ret) {
- dev_err(smi->dev, "unable to register MDIO bus %s\n",
- smi->slave_mii_bus->id);
- goto err_put_node;
- }
-
- return 0;
-
-err_put_node:
- of_node_put(mdio_np);
-
- return ret;
-}
-
-static int realtek_smi_probe(struct platform_device *pdev)
-{
- const struct realtek_smi_variant *var;
- struct device *dev = &pdev->dev;
- struct realtek_smi *smi;
- struct device_node *np;
- int ret;
-
- var = of_device_get_match_data(dev);
- np = dev->of_node;
-
- smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL);
- if (!smi)
- return -ENOMEM;
- smi->map = devm_regmap_init(dev, NULL, smi,
- &realtek_smi_mdio_regmap_config);
- if (IS_ERR(smi->map)) {
- ret = PTR_ERR(smi->map);
- dev_err(dev, "regmap init failed: %d\n", ret);
- return ret;
- }
-
- /* Link forward and backward */
- smi->dev = dev;
- smi->clk_delay = var->clk_delay;
- smi->cmd_read = var->cmd_read;
- smi->cmd_write = var->cmd_write;
- smi->ops = var->ops;
-
- dev_set_drvdata(dev, smi);
- spin_lock_init(&smi->lock);
-
- /* TODO: if power is software controlled, set up any regulators here */
-
- /* Assert then deassert RESET */
- smi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(smi->reset)) {
- dev_err(dev, "failed to get RESET GPIO\n");
- return PTR_ERR(smi->reset);
- }
- msleep(REALTEK_SMI_HW_STOP_DELAY);
- gpiod_set_value(smi->reset, 0);
- msleep(REALTEK_SMI_HW_START_DELAY);
- dev_info(dev, "deasserted RESET\n");
-
- /* Fetch MDIO pins */
- smi->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW);
- if (IS_ERR(smi->mdc))
- return PTR_ERR(smi->mdc);
- smi->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW);
- if (IS_ERR(smi->mdio))
- return PTR_ERR(smi->mdio);
-
- smi->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
-
- ret = smi->ops->detect(smi);
- if (ret) {
- dev_err(dev, "unable to detect switch\n");
- return ret;
- }
-
- smi->ds = dsa_switch_alloc(dev, smi->num_ports);
- if (!smi->ds)
- return -ENOMEM;
- smi->ds->priv = smi;
-
- smi->ds->ops = var->ds_ops;
- ret = dsa_register_switch(smi->ds);
- if (ret) {
- dev_err(dev, "unable to register switch ret = %d\n", ret);
- return ret;
- }
- return 0;
-}
-
-static int realtek_smi_remove(struct platform_device *pdev)
-{
- struct realtek_smi *smi = dev_get_drvdata(&pdev->dev);
-
- dsa_unregister_switch(smi->ds);
- if (smi->slave_mii_bus)
- of_node_put(smi->slave_mii_bus->dev.of_node);
- gpiod_set_value(smi->reset, 1);
-
- return 0;
-}
-
-static const struct of_device_id realtek_smi_of_match[] = {
- {
- .compatible = "realtek,rtl8366rb",
- .data = &rtl8366rb_variant,
- },
- {
- /* FIXME: add support for RTL8366S and more */
- .compatible = "realtek,rtl8366s",
- .data = NULL,
- },
- { /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, realtek_smi_of_match);
-
-static struct platform_driver realtek_smi_driver = {
- .driver = {
- .name = "realtek-smi",
- .of_match_table = of_match_ptr(realtek_smi_of_match),
- },
- .probe = realtek_smi_probe,
- .remove = realtek_smi_remove,
-};
-module_platform_driver(realtek_smi_driver);
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/* Realtek SMI interface driver defines
- *
- * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- */
-
-#ifndef _REALTEK_SMI_H
-#define _REALTEK_SMI_H
-
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <net/dsa.h>
-
-struct realtek_smi_ops;
-struct dentry;
-struct inode;
-struct file;
-
-struct rtl8366_mib_counter {
- unsigned int base;
- unsigned int offset;
- unsigned int length;
- const char *name;
-};
-
-struct rtl8366_vlan_mc {
- u16 vid;
- u16 untag;
- u16 member;
- u8 fid;
- u8 priority;
-};
-
-struct rtl8366_vlan_4k {
- u16 vid;
- u16 untag;
- u16 member;
- u8 fid;
-};
-
-struct realtek_smi {
- struct device *dev;
- struct gpio_desc *reset;
- struct gpio_desc *mdc;
- struct gpio_desc *mdio;
- struct regmap *map;
- struct mii_bus *slave_mii_bus;
-
- unsigned int clk_delay;
- u8 cmd_read;
- u8 cmd_write;
- spinlock_t lock; /* Locks around command writes */
- struct dsa_switch *ds;
- struct irq_domain *irqdomain;
- bool leds_disabled;
-
- unsigned int cpu_port;
- unsigned int num_ports;
- unsigned int num_vlan_mc;
- unsigned int num_mib_counters;
- struct rtl8366_mib_counter *mib_counters;
-
- const struct realtek_smi_ops *ops;
-
- int vlan_enabled;
- int vlan4k_enabled;
-
- char buf[4096];
-};
-
-/**
- * struct realtek_smi_ops - vtable for the per-SMI-chiptype operations
- * @detect: detects the chiptype
- */
-struct realtek_smi_ops {
- int (*detect)(struct realtek_smi *smi);
- int (*reset_chip)(struct realtek_smi *smi);
- int (*setup)(struct realtek_smi *smi);
- void (*cleanup)(struct realtek_smi *smi);
- int (*get_mib_counter)(struct realtek_smi *smi,
- int port,
- struct rtl8366_mib_counter *mib,
- u64 *mibvalue);
- int (*get_vlan_mc)(struct realtek_smi *smi, u32 index,
- struct rtl8366_vlan_mc *vlanmc);
- int (*set_vlan_mc)(struct realtek_smi *smi, u32 index,
- const struct rtl8366_vlan_mc *vlanmc);
- int (*get_vlan_4k)(struct realtek_smi *smi, u32 vid,
- struct rtl8366_vlan_4k *vlan4k);
- int (*set_vlan_4k)(struct realtek_smi *smi,
- const struct rtl8366_vlan_4k *vlan4k);
- int (*get_mc_index)(struct realtek_smi *smi, int port, int *val);
- int (*set_mc_index)(struct realtek_smi *smi, int port, int index);
- bool (*is_vlan_valid)(struct realtek_smi *smi, unsigned int vlan);
- int (*enable_vlan)(struct realtek_smi *smi, bool enable);
- int (*enable_vlan4k)(struct realtek_smi *smi, bool enable);
- int (*enable_port)(struct realtek_smi *smi, int port, bool enable);
- int (*phy_read)(struct realtek_smi *smi, int phy, int regnum);
- int (*phy_write)(struct realtek_smi *smi, int phy, int regnum,
- u16 val);
-};
-
-struct realtek_smi_variant {
- const struct dsa_switch_ops *ds_ops;
- const struct realtek_smi_ops *ops;
- unsigned int clk_delay;
- u8 cmd_read;
- u8 cmd_write;
-};
-
-/* SMI core calls */
-int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr,
- u32 data);
-int realtek_smi_setup_mdio(struct realtek_smi *smi);
-
-/* RTL8366 library helpers */
-int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used);
-int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member,
- u32 untag, u32 fid);
-int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val);
-int rtl8366_set_pvid(struct realtek_smi *smi, unsigned int port,
- unsigned int vid);
-int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
-int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
-int rtl8366_reset_vlan(struct realtek_smi *smi);
-int rtl8366_init_vlan(struct realtek_smi *smi);
-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port,
- bool vlan_filtering);
-int rtl8366_vlan_prepare(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan);
-void rtl8366_vlan_add(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan);
-int rtl8366_vlan_del(struct dsa_switch *ds, int port,
- const struct switchdev_obj_port_vlan *vlan);
-void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
- uint8_t *data);
-int rtl8366_get_sset_count(struct dsa_switch *ds, int port, int sset);
-void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data);
-
-extern const struct realtek_smi_variant rtl8366rb_variant;
-
-#endif /* _REALTEK_SMI_H */
#include <linux/if_bridge.h>
#include <net/dsa.h>
-#include "realtek-smi.h"
+#include "realtek-smi-core.h"
int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used)
{
#include <linux/of_irq.h>
#include <linux/regmap.h>
-#include "realtek-smi.h"
+#include "realtek-smi-core.h"
#define RTL8366RB_PORT_NUM_CPU 5
#define RTL8366RB_NUM_PORTS 6
projects / openwrt / staging / blogic.git / commitdiff