--- /dev/null
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0
+ option type bridge
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname eth1
+ option proto dhcp
+++ /dev/null
-config interface loopback
- option ifname lo
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-config interface lan
- option ifname eth0
- option type bridge
- option proto static
- option ipaddr 192.168.1.1
- option netmask 255.255.255.0
-
-config interface wan
- option ifname eth1
- option proto dhcp
bullet-m | rocket-m | nano-m)
status_led="ubnt:green:link4"
;;
- dir825b1)
+ dir-825-b1)
status_led="dir825b1:orange:power"
;;
ls-sr71)
*AW-NR580)
name="aw-nr580"
;;
- *DIR825B1)
- name="dir825b1"
+ *"DIR-825 rev. B1")
+ name="dir-825-b1"
;;
*"Bullet M")
name="bullet-m"
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
- ap83 | dir825b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
+ ap83 | dir-825-b1 | mzk-w04nu | mzk-w300nh | tew-632brp | wrt-400n | bullet-m | nano-m | rocket-m)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
+CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_MZK_W04NU=y
CONFIG_AR71XX_MACH_MZK_W300NH=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DIR825B1=y
+CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_MZK_W04NU=y
CONFIG_AR71XX_MACH_MZK_W300NH=y
CONFIG_AR71XX_MACH_AP81=y
CONFIG_AR71XX_MACH_AP83=y
CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DIR825B1=y
+CONFIG_AR71XX_MACH_DIR_825_B1=y
CONFIG_AR71XX_MACH_GENERIC=y
CONFIG_AR71XX_MACH_MZK_W04NU=y
CONFIG_AR71XX_MACH_MZK_W300NH=y
bool "Atheros AP83 board support"
default y
-config AR71XX_MACH_DIR825B1
+config AR71XX_MACH_DIR_825_B1
bool "D-Link DIR-825 rev. B1 board support"
default y
obj-$(CONFIG_AR71XX_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_AR71XX_MACH_AP83) += mach-ap83.o
obj-$(CONFIG_AR71XX_MACH_AW_NR580) += mach-aw-nr580.o
-obj-$(CONFIG_AR71XX_MACH_DIR825B1) += mach-dir825b1.o
+obj-$(CONFIG_AR71XX_MACH_DIR_825_B1) += mach-dir-825-b1.o
obj-$(CONFIG_AR71XX_MACH_GENERIC) += mach-generic.o
obj-$(CONFIG_AR71XX_MACH_MZK_W04NU) += mach-mzk-w04nu.o
obj-$(CONFIG_AR71XX_MACH_MZK_W300NH) += mach-mzk-w300nh.o
--- /dev/null
+/*
+ * D-Link DIR-825 rev. B1 board support
+ *
+ * Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
+ *
+ * based on mach-wndr3700.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/input.h>
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mips_machine.h>
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "devices.h"
+
+#define DIR825B1_GPIO_LED_BLUE_USB 0
+#define DIR825B1_GPIO_LED_ORANGE_POWER 1
+#define DIR825B1_GPIO_LED_BLUE_POWER 2
+#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4
+#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
+#define DIR825B1_GPIO_LED_BLUE_PLANET 11
+
+#define DIR825B1_GPIO_BTN_RESET 3
+#define DIR825B1_GPIO_BTN_POWERSAVE 8
+
+#define DIR825B1_BUTTONS_POLL_INTERVAL 20
+
+#define DIR825B1_CAL_LOCATION_0 0x1f661000
+#define DIR825B1_CAL_LOCATION_1 0x1f665000
+
+#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8
+#define DIR825B1_MAC_LOCATION_1 0x2ffa8370
+
+static struct ath9k_platform_data dir825b1_wmac0_data;
+static struct ath9k_platform_data dir825b1_wmac1_data;
+static char dir825b1_wmac0_mac[6];
+static char dir825b1_wmac1_mac[6];
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition dir825b1_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "config",
+ .offset = 0x040000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ } , {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x610000,
+ } , {
+ .name = "caldata",
+ .offset = 0x660000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data dir825b1_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .parts = dir825b1_partitions,
+ .nr_parts = ARRAY_SIZE(dir825b1_partitions),
+#endif
+};
+
+static struct spi_board_info dir825b1_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &dir825b1_flash_data,
+ }
+};
+
+static struct gpio_led dir825b1_leds_gpio[] __initdata = {
+ {
+ .name = "dir825b1:blue:usb",
+ .gpio = DIR825B1_GPIO_LED_BLUE_USB,
+ .active_low = 1,
+ }, {
+ .name = "dir825b1:orange:power",
+ .gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "dir825b1:blue:power",
+ .gpio = DIR825B1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "dir825b1:blue:powersave",
+ .gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE,
+ .active_low = 1,
+ }, {
+ .name = "dir825b1:orange:planet",
+ .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
+ .active_low = 1,
+ }, {
+ .name = "dir825b1:blue:planet",
+ .gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_button dir825b1_gpio_buttons[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 5,
+ .gpio = DIR825B1_GPIO_BTN_RESET,
+ .active_low = 1,
+ } , {
+ .desc = "powersave",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .threshold = 5,
+ .gpio = DIR825B1_GPIO_BTN_POWERSAVE,
+ .active_low = 1,
+ }
+};
+
+#ifdef CONFIG_PCI
+static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = {
+ {
+ .slot = 0,
+ .pin = 1,
+ .irq = AR71XX_PCI_IRQ_DEV0,
+ }, {
+ .slot = 1,
+ .pin = 1,
+ .irq = AR71XX_PCI_IRQ_DEV1,
+ }
+};
+
+static int dir825b1_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch(PCI_SLOT(dev->devfn)) {
+ case 17:
+ dev->dev.platform_data = &dir825b1_wmac0_data;
+ break;
+
+ case 18:
+ dev->dev.platform_data = &dir825b1_wmac1_data;
+ break;
+ }
+
+ return 0;
+}
+
+static void dir825b1_pci_fixup(struct pci_dev *dev)
+{
+ void __iomem *mem;
+ u16 *cal_data;
+ u16 cmd;
+ u32 bar0;
+ u32 val;
+
+ if (ar71xx_mach != AR71XX_MACH_DIR_825_B1)
+ return;
+
+ dir825b1_pci_plat_dev_init(dev);
+ cal_data = dev->dev.platform_data;
+
+ if (*cal_data != 0xa55a) {
+ printk(KERN_ERR "PCI: no calibration data found for %s\n",
+ pci_name(dev));
+ return;
+ }
+
+ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
+ if (!mem) {
+ printk(KERN_ERR "PCI: ioremap error for device %s\n",
+ pci_name(dev));
+ return;
+ }
+
+ printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev));
+
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
+
+ /* Setup the PCI device to allow access to the internal registers */
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE);
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ /* set pointer to first reg address */
+ cal_data += 3;
+ while (*cal_data != 0xffff) {
+ u32 reg;
+ reg = *cal_data++;
+ val = *cal_data++;
+ val |= (*cal_data++) << 16;
+
+ __raw_writel(val, mem + reg);
+ udelay(100);
+ }
+
+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
+ dev->vendor = val & 0xffff;
+ dev->device = (val >> 16) & 0xffff;
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
+ dev->revision = val & 0xff;
+ dev->class = val >> 8; /* upper 3 bytes */
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
+
+ iounmap(mem);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
+ dir825b1_pci_fixup);
+
+static void __init dir825b1_pci_init(void)
+{
+ memcpy(dir825b1_wmac0_data.eeprom_data,
+ (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
+ sizeof(dir825b1_wmac0_data.eeprom_data));
+
+ memcpy(dir825b1_wmac1_data.eeprom_data,
+ (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
+ sizeof(dir825b1_wmac1_data.eeprom_data));
+
+ memcpy(dir825b1_wmac0_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_0), 6);
+ dir825b1_wmac0_data.macaddr = dir825b1_wmac0_mac;
+ memcpy(dir825b1_wmac1_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
+ dir825b1_wmac1_data.macaddr = dir825b1_wmac1_mac;
+
+ ar71xx_pci_plat_dev_init = dir825b1_pci_plat_dev_init;
+ ar71xx_pci_init(ARRAY_SIZE(dir825b1_pci_irqs), dir825b1_pci_irqs);
+}
+#else
+static void __init dir825b1_pci_init(void) { }
+#endif /* CONFIG_PCI */
+
+static void __init dir825b1_setup(void)
+{
+ u8 mac[6], i;
+
+ memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
+ for(i = 5; i >= 3; i--)
+ if(++mac[i] != 0x00) break;
+
+ ar71xx_set_mac_base(mac);
+
+ ar71xx_add_device_mdio(0x0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth0_data.phy_mask = 0x1e;
+ ar71xx_eth0_data.speed = SPEED_1000;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
+
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ar71xx_eth1_data.phy_mask = 0xc0;
+ ar71xx_eth1_data.speed = SPEED_1000;
+ ar71xx_eth1_data.duplex = DUPLEX_FULL;
+ ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
+
+ ar71xx_add_device_eth(0);
+ ar71xx_add_device_eth(1);
+
+ ar71xx_add_device_spi(NULL, dir825b1_spi_info,
+ ARRAY_SIZE(dir825b1_spi_info));
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
+ dir825b1_leds_gpio);
+
+ ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(dir825b1_gpio_buttons),
+ dir825b1_gpio_buttons);
+
+ ar71xx_add_device_usb();
+
+ dir825b1_pci_init();
+}
+
+MIPS_MACHINE(AR71XX_MACH_DIR_825_B1, "D-Link DIR-825 rev. B1", dir825b1_setup);
+++ /dev/null
-/*
- * D-Link DIR-825 rev. B1 board support
- *
- * Copyright (C) 2009 Lukas Kuna, Evkanet, s.r.o.
- *
- * based on mach-wndr3700.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
-
-#include <asm/mips_machine.h>
-#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
-
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-#include <linux/delay.h>
-
-#include "devices.h"
-
-
-#define DIR825B1_GPIO_LED_BLUE_USB 0
-#define DIR825B1_GPIO_LED_ORANGE_POWER 1
-#define DIR825B1_GPIO_LED_BLUE_POWER 2
-#define DIR825B1_GPIO_LED_BLUE_POWERSAVE 4
-#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
-#define DIR825B1_GPIO_LED_BLUE_PLANET 11
-
-#define DIR825B1_GPIO_BTN_RESET 3
-#define DIR825B1_GPIO_BTN_POWERSAVE 8
-
-#define DIR825B1_BUTTONS_POLL_INTERVAL 20
-
-
-#define DIR825B1_CAL_LOCATION_0 0xbf661000
-#define DIR825B1_CAL_LOCATION_1 0xbf665000
-
-#define DIR825B1_MAC_LOCATION_0 0x2ffa81b8
-#define DIR825B1_MAC_LOCATION_1 0x2ffa8370
-
-
-static struct ath9k_platform_data dir825b1_wmac0_data;
-static struct ath9k_platform_data dir825b1_wmac1_data;
-static char dir825b1_wmac0_mac[6];
-static char dir825b1_wmac1_mac[6];
-
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition dir825b1_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "config",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- } , {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x610000,
- } , {
- .name = "caldata",
- .offset = 0x660000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-#endif /* CONFIG_MTD_PARTITIONS */
-
-
-static struct flash_platform_data dir825b1_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = dir825b1_partitions,
- .nr_parts = ARRAY_SIZE(dir825b1_partitions),
-#endif
-};
-
-
-static struct spi_board_info dir825b1_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &dir825b1_flash_data,
- }
-};
-
-
-static struct gpio_led dir825b1_leds_gpio[] __initdata = {
- {
- .name = "dir825b1:blue:usb",
- .gpio = DIR825B1_GPIO_LED_BLUE_USB,
- .active_low = 1,
- }, {
- .name = "dir825b1:orange:power",
- .gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
- .active_low = 1,
- }, {
- .name = "dir825b1:blue:power",
- .gpio = DIR825B1_GPIO_LED_BLUE_POWER,
- .active_low = 1,
- }, {
- .name = "dir825b1:blue:powersave",
- .gpio = DIR825B1_GPIO_LED_BLUE_POWERSAVE,
- .active_low = 1,
- }, {
- .name = "dir825b1:orange:planet",
- .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
- .active_low = 1,
- }, {
- .name = "dir825b1:blue:planet",
- .gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
- .active_low = 1,
- }
-};
-
-
-static struct gpio_button dir825b1_gpio_buttons[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_0,
- .threshold = 5,
- .gpio = DIR825B1_GPIO_BTN_RESET,
- .active_low = 1,
- } , {
- .desc = "powersave",
- .type = EV_KEY,
- .code = BTN_1,
- .threshold = 5,
- .gpio = DIR825B1_GPIO_BTN_POWERSAVE,
- .active_low = 1,
- }
-};
-
-
-#ifdef CONFIG_PCI
-static struct ar71xx_pci_irq dir825b1_pci_irqs[] __initdata = {
- {
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }
-};
-
-
-static int dir825b1_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch(PCI_SLOT(dev->devfn))
- {
- case 17:
- dev->dev.platform_data = &dir825b1_wmac0_data;
- break;
-
- case 18:
- dev->dev.platform_data = &dir825b1_wmac1_data;
- break;
- }
-
- return(0);
-}
-
-
-static void dir825b1_pci_fixup(struct pci_dev *dev)
-{
- void __iomem *mem;
- u16 *cal_data;
- u16 cmd;
- u32 bar0;
- u32 val;
-
- if (ar71xx_mach != AR71XX_MACH_DIR825B1) return;
-
- dir825b1_pci_plat_dev_init(dev);
- cal_data = dev->dev.platform_data;
-
- if (*cal_data != 0xa55a)
- {
- printk(KERN_ERR "PCI: no calibration data found for %s\n",
- pci_name(dev));
- return;
- }
-
- mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
- if (!mem)
- {
- printk(KERN_ERR "PCI: ioremap error for device %s\n",
- pci_name(dev));
- return;
- }
-
- printk(KERN_INFO "PCI: fixup device %s\n", pci_name(dev));
-
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-
- /* Setup the PCI device to allow access to the internal registers */
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, AR71XX_PCI_MEM_BASE);
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- /* set pointer to first reg address */
- cal_data += 3;
- while (*cal_data != 0xffff)
- {
- u32 reg;
- reg = *cal_data++;
- val = *cal_data++;
- val |= (*cal_data++) << 16;
-
- __raw_writel(val, mem + reg);
- udelay(100);
- }
-
- pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
- dev->vendor = val & 0xffff;
- dev->device = (val >> 16) & 0xffff;
-
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
- dev->revision = val & 0xff;
- dev->class = val >> 8; /* upper 3 bytes */
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-
- iounmap(mem);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID,
- dir825b1_pci_fixup);
-
-
-static void __init dir825b1_pci_init(void)
-{
- memcpy(dir825b1_wmac0_data.eeprom_data,
- (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0),
- sizeof(dir825b1_wmac0_data.eeprom_data));
-
- memcpy(dir825b1_wmac1_data.eeprom_data,
- (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1),
- sizeof(dir825b1_wmac1_data.eeprom_data));
-
- memcpy(dir825b1_wmac0_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_0), 6);
- dir825b1_wmac0_data.macaddr = dir825b1_wmac0_mac;
- memcpy(dir825b1_wmac1_mac, (u8 *)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
- dir825b1_wmac1_data.macaddr = dir825b1_wmac1_mac;
-
- ar71xx_pci_plat_dev_init = dir825b1_pci_plat_dev_init;
- ar71xx_pci_init(ARRAY_SIZE(dir825b1_pci_irqs), dir825b1_pci_irqs);
-}
-#else
-static void __init dir825b1_pci_init(void) { }
-#endif /* CONFIG_PCI */
-
-
-static void __init dir825b1_setup(void)
-{
- u8 mac[6], i;
-
- memcpy(mac, (u8*)KSEG1ADDR(DIR825B1_MAC_LOCATION_1), 6);
- for(i = 5; i >= 3; i--)
- if(++mac[i] != 0x00) break;
-
- ar71xx_set_mac_base(mac);
-
- ar71xx_add_device_mdio(0x0);
-
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth0_data.phy_mask = 0x1E;
- ar71xx_eth0_data.speed = SPEED_1000;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
- ar71xx_eth0_pll_data.pll_1000 = 0x11110000;
-
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth1_data.phy_mask = 0xC0;
- ar71xx_eth1_data.speed = SPEED_1000;
- ar71xx_eth1_data.duplex = DUPLEX_FULL;
- ar71xx_eth1_pll_data.pll_1000 = 0x11110000;
-
- ar71xx_add_device_eth(0);
- ar71xx_add_device_eth(1);
-
- ar71xx_add_device_spi(NULL, dir825b1_spi_info,
- ARRAY_SIZE(dir825b1_spi_info));
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
- dir825b1_leds_gpio);
-
- ar71xx_add_device_gpio_buttons(-1, DIR825B1_BUTTONS_POLL_INTERVAL,
- ARRAY_SIZE(dir825b1_gpio_buttons),
- dir825b1_gpio_buttons);
-
- ar71xx_add_device_usb();
-
- dir825b1_pci_init();
-}
-
-MIPS_MACHINE(AR71XX_MACH_DIR825B1, "D-Link DIR825B1", dir825b1_setup);
.name = "AW-NR580",
.mach_type = AR71XX_MACH_AW_NR580,
}, {
- .name = "DIR825B1",
- .mach_type = AR71XX_MACH_DIR825B1,
+ .name = "DIR-825-B1",
+ .mach_type = AR71XX_MACH_DIR_825_B1,
}, {
.name = "TEW-632BRP",
.mach_type = AR71XX_MACH_TEW_632BRP,
AR71XX_MACH_AP81, /* Atheros AP81 */
AR71XX_MACH_AP83, /* Atheros AP83 */
AR71XX_MACH_AW_NR580, /* AzureWave AW-NR580 */
- AR71XX_MACH_DIR825B1, /* D-Link DIR-825 rev. B1 */
+ AR71XX_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
AR71XX_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
AR71XX_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
AR71XX_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
endef
define Image/Build/Profile/DIR825B1
- $(call Image/Build/Template/DIR825B1/$(1),dir825b1,board=DIR825B1)
+ $(call Image/Build/Template/DIR825B1/$(1),dir-825-b1,board=DIR-825-B1)
endef
define Image/Build/Profile/WRT160NL
projects / openwrt / staging / ynezz.git / commitdiff