--- /dev/null
+#!/usr/bin/env bash
+#
+# Licensed under the terms of the GNU GPL License version 2 or later.
+# Author: David Bauer <mail@david-bauer.net>, based on mkits-zyxel-factory.sh.
+
+usage() {
+ echo "Usage: `basename $0` output file compat-models"
+ exit 1
+}
+
+# We need at least 3 arguments
+[ "$#" -lt 3 ] && usage
+
+# Target output file
+OUTPUT="$1"; shift
+FILE="$1"; shift
+MODELS="$1"; shift
+
+# Create a default, fully populated DTS file
+echo "\
+/dts-v1/;
+
+/ {
+ timestamp = <0x684090B4>;
+ description = \"Zyxel FIT (Flattened Image Tree)\";
+ compat-models = [${MODELS}];
+ fw_version = \"9.99(###.1)\";
+ #address-cells = <1>;
+
+ images {
+ ubi {
+ data = /incbin/(\"${FILE}\");
+ type = \"firmware\";
+ compression = \"none\";
+ hash {
+ algo = \"sha256\";
+ };
+ };
+ };
+};" > ${OUTPUT}
--- /dev/null
+/dts-v1/;
+
+#include "mt7981.dtsi"
+
+/ {
+ model = "ZyXEL NWA50AX Pro";
+ compatible = "zyxel,nwa50ax-pro", "mediatek,mt7981";
+
+ aliases {
+ led-boot = &led_green;
+ led-failsafe = &led_red;
+ led-running = &led_green;
+ led-upgrade = &led_red;
+ serial0 = &uart0;
+ label-mac-device = &gmac1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_green: led@0 {
+ label = "green:system";
+ gpios = <&pio 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led@1 {
+ label = "blue:system";
+ gpios = <&pio 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_red: led@2 {
+ label = "red:system";
+ gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-mode = "2500base-x";
+
+ phy-handle = <&phy0>;
+
+ nvmem-cells = <&macaddr_mrd_1fff8>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&mdio_bus {
+ reset-gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <1500000>;
+ reset-post-delay-us = <1000000>;
+
+ phy0: ethernet-phy@5 {
+ reg = <5>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+
+ spi-cal-enable;
+ spi-cal-mode = "read-data";
+ spi-cal-datalen = <7>;
+ spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
+ spi-cal-addrlen = <5>;
+ spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+ spi-tx-buswidth = <4>;
+ spi-rx-buswidth = <4>;
+ mediatek,nmbm;
+ mediatek,bmt-max-ratio = <1>;
+ mediatek,bmt-max-reserved-blocks = <64>;
+
+ mediatek,bmt-remap-range =
+ <0x0 0x580000>,
+ <0xef00000 0xef80000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "BL2";
+ reg = <0x00000 0x0100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0080000>;
+ };
+
+ factory: partition@180000 {
+ label = "Factory";
+ reg = <0x180000 0x0200000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr: macaddr@a {
+ reg = <0xa 0x6>;
+ };
+ };
+
+ partition@380000 {
+ label = "FIP";
+ reg = <0x380000 0x0200000>;
+ read-only;
+ };
+
+ partition@580000 {
+ label = "ubi";
+ reg = <0x580000 0x3200000>;
+ };
+
+ partition@3780000 {
+ label = "ubi_1";
+ reg = <0x3780000 0x3200000>;
+ read-only;
+ };
+
+ partition@6980000 {
+ label = "rootfs-data";
+ reg = <0x6980000 0x3c00000>;
+ read-only;
+ };
+
+ partition@a580000 {
+ label = "logs";
+ reg = <0xa580000 0x3a80000>;
+ read-only;
+ };
+
+ partition@e000000 {
+ label = "myzyxel";
+ reg = <0xe000000 0xf00000>;
+ read-only;
+ };
+
+ partition@ef00000 {
+ label = "bootconfig";
+ reg = <0xef00000 0x80000>;
+ };
+
+ partition@ef80000 {
+ label = "mrd";
+ reg = <0xef80000 0x80000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_mrd_1fff8: macaddr@1fff8 {
+ reg = <0x1fff8 0x6>;
+ };
+ };
+ };
+ };
+};
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+
+ pwm_pins: pwm0-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm0_1";
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
}
endef
+define Build/zyxel-nwa-fit-filogic
+ $(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
+ $@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
+ PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+ @mv $@.new $@
+endef
+
define Device/asus_tuf-ax4200
DEVICE_VENDOR := ASUS
DEVICE_MODEL := TUF-AX4200
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
endef
TARGET_DEVICES += zyxel_ex5601-t0-stock
+
+define Device/zyxel_nwa50ax-pro
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NWA50AX Pro
+ DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
+ DEVICE_DTS_LOADADDR := 0x44000000
+ UBINIZE_OPTS := -E 5
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 51200k
+ KERNEL_IN_UBI := 1
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zyxel_nwa50ax-pro
projects / openwrt / openwrt.git / commitdiff