return crc;
}
+static int mxt_prepare_cfg_mem(struct mxt_data *data,
+ const struct firmware *cfg,
+ unsigned int data_pos,
+ unsigned int cfg_start_ofs,
+ u8 *config_mem,
+ size_t config_mem_size)
+{
+ struct device *dev = &data->client->dev;
+ struct mxt_object *object;
+ unsigned int type, instance, size, byte_offset;
+ int offset;
+ int ret;
+ int i;
+ u16 reg;
+ u8 val;
+
+ while (data_pos < cfg->size) {
+ /* Read type, instance, length */
+ ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
+ &type, &instance, &size, &offset);
+ if (ret == 0) {
+ /* EOF */
+ break;
+ } else if (ret != 3) {
+ dev_err(dev, "Bad format: failed to parse object\n");
+ return -EINVAL;
+ }
+ data_pos += offset;
+
+ object = mxt_get_object(data, type);
+ if (!object) {
+ /* Skip object */
+ for (i = 0; i < size; i++) {
+ ret = sscanf(cfg->data + data_pos, "%hhx%n",
+ &val,
+ &offset);
+ data_pos += offset;
+ }
+ continue;
+ }
+
+ if (size > mxt_obj_size(object)) {
+ /*
+ * Either we are in fallback mode due to wrong
+ * config or config from a later fw version,
+ * or the file is corrupt or hand-edited.
+ */
+ dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
+ size - mxt_obj_size(object), type);
+ } else if (mxt_obj_size(object) > size) {
+ /*
+ * If firmware is upgraded, new bytes may be added to
+ * end of objects. It is generally forward compatible
+ * to zero these bytes - previous behaviour will be
+ * retained. However this does invalidate the CRC and
+ * will force fallback mode until the configuration is
+ * updated. We warn here but do nothing else - the
+ * malloc has zeroed the entire configuration.
+ */
+ dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
+ mxt_obj_size(object) - size, type);
+ }
+
+ if (instance >= mxt_obj_instances(object)) {
+ dev_err(dev, "Object instances exceeded!\n");
+ return -EINVAL;
+ }
+
+ reg = object->start_address + mxt_obj_size(object) * instance;
+
+ for (i = 0; i < size; i++) {
+ ret = sscanf(cfg->data + data_pos, "%hhx%n",
+ &val,
+ &offset);
+ if (ret != 1) {
+ dev_err(dev, "Bad format in T%d\n", type);
+ return -EINVAL;
+ }
+ data_pos += offset;
+
+ if (i > mxt_obj_size(object))
+ continue;
+
+ byte_offset = reg + i - cfg_start_ofs;
+
+ if (byte_offset >= 0 &&
+ byte_offset <= config_mem_size) {
+ *(config_mem + byte_offset) = val;
+ } else {
+ dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
+ reg, object->type, byte_offset);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start,
+ u8 *config_mem, size_t config_mem_size)
+{
+ unsigned int byte_offset = 0;
+ int error;
+
+ /* Write configuration as blocks */
+ while (byte_offset < config_mem_size) {
+ unsigned int size = config_mem_size - byte_offset;
+
+ if (size > MXT_MAX_BLOCK_WRITE)
+ size = MXT_MAX_BLOCK_WRITE;
+
+ error = __mxt_write_reg(data->client,
+ cfg_start + byte_offset,
+ size, config_mem + byte_offset);
+ if (error) {
+ dev_err(&data->client->dev,
+ "Config write error, ret=%d\n", error);
+ return error;
+ }
+
+ byte_offset += size;
+ }
+
+ return 0;
+}
+
/*
* mxt_update_cfg - download configuration to chip
*
{
struct device *dev = &data->client->dev;
struct mxt_info cfg_info;
- struct mxt_object *object;
int ret;
int offset;
int data_pos;
- int byte_offset;
int i;
int cfg_start_ofs;
u32 info_crc, config_crc, calculated_crc;
u8 *config_mem;
size_t config_mem_size;
- unsigned int type, instance, size;
- u8 val;
- u16 reg;
mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
dev_err(dev, "Unrecognised config file\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos = strlen(MXT_CFG_MAGIC);
&offset);
if (ret != 1) {
dev_err(dev, "Bad format\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
if (cfg_info.family_id != data->info.family_id) {
dev_err(dev, "Family ID mismatch!\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
if (cfg_info.variant_id != data->info.variant_id) {
dev_err(dev, "Variant ID mismatch!\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
/* Read CRCs */
ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
if (ret != 1) {
dev_err(dev, "Bad format: failed to parse Info CRC\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
if (ret != 1) {
dev_err(dev, "Bad format: failed to parse Config CRC\n");
- ret = -EINVAL;
- goto release;
+ return -EINVAL;
}
data_pos += offset;
} else if (config_crc == data->config_crc) {
dev_dbg(dev, "Config CRC 0x%06X: OK\n",
data->config_crc);
- ret = 0;
- goto release;
+ return 0;
} else {
dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
data->config_crc, config_crc);
config_mem = kzalloc(config_mem_size, GFP_KERNEL);
if (!config_mem) {
dev_err(dev, "Failed to allocate memory\n");
- ret = -ENOMEM;
- goto release;
+ return -ENOMEM;
}
- while (data_pos < cfg->size) {
- /* Read type, instance, length */
- ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
- &type, &instance, &size, &offset);
- if (ret == 0) {
- /* EOF */
- break;
- } else if (ret != 3) {
- dev_err(dev, "Bad format: failed to parse object\n");
- ret = -EINVAL;
- goto release_mem;
- }
- data_pos += offset;
-
- object = mxt_get_object(data, type);
- if (!object) {
- /* Skip object */
- for (i = 0; i < size; i++) {
- ret = sscanf(cfg->data + data_pos, "%hhx%n",
- &val,
- &offset);
- data_pos += offset;
- }
- continue;
- }
-
- if (size > mxt_obj_size(object)) {
- /*
- * Either we are in fallback mode due to wrong
- * config or config from a later fw version,
- * or the file is corrupt or hand-edited.
- */
- dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
- size - mxt_obj_size(object), type);
- } else if (mxt_obj_size(object) > size) {
- /*
- * If firmware is upgraded, new bytes may be added to
- * end of objects. It is generally forward compatible
- * to zero these bytes - previous behaviour will be
- * retained. However this does invalidate the CRC and
- * will force fallback mode until the configuration is
- * updated. We warn here but do nothing else - the
- * malloc has zeroed the entire configuration.
- */
- dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
- mxt_obj_size(object) - size, type);
- }
-
- if (instance >= mxt_obj_instances(object)) {
- dev_err(dev, "Object instances exceeded!\n");
- ret = -EINVAL;
- goto release_mem;
- }
-
- reg = object->start_address + mxt_obj_size(object) * instance;
-
- for (i = 0; i < size; i++) {
- ret = sscanf(cfg->data + data_pos, "%hhx%n",
- &val,
- &offset);
- if (ret != 1) {
- dev_err(dev, "Bad format in T%d\n", type);
- ret = -EINVAL;
- goto release_mem;
- }
- data_pos += offset;
-
- if (i > mxt_obj_size(object))
- continue;
-
- byte_offset = reg + i - cfg_start_ofs;
-
- if ((byte_offset >= 0)
- && (byte_offset <= config_mem_size)) {
- *(config_mem + byte_offset) = val;
- } else {
- dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
- reg, object->type, byte_offset);
- ret = -EINVAL;
- goto release_mem;
- }
- }
- }
+ ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs,
+ config_mem, config_mem_size);
+ if (ret)
+ goto release_mem;
/* Calculate crc of the received configs (not the raw config file) */
if (data->T7_address < cfg_start_ofs) {
data->T7_address - cfg_start_ofs,
config_mem_size);
- if (config_crc > 0 && (config_crc != calculated_crc))
+ if (config_crc > 0 && config_crc != calculated_crc)
dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
calculated_crc, config_crc);
- /* Write configuration as blocks */
- byte_offset = 0;
- while (byte_offset < config_mem_size) {
- size = config_mem_size - byte_offset;
-
- if (size > MXT_MAX_BLOCK_WRITE)
- size = MXT_MAX_BLOCK_WRITE;
-
- ret = __mxt_write_reg(data->client,
- cfg_start_ofs + byte_offset,
- size, config_mem + byte_offset);
- if (ret != 0) {
- dev_err(dev, "Config write error, ret=%d\n", ret);
- goto release_mem;
- }
-
- byte_offset += size;
- }
+ ret = mxt_upload_cfg_mem(data, cfg_start_ofs,
+ config_mem, config_mem_size);
+ if (ret)
+ goto release_mem;
mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
release_mem:
kfree(config_mem);
-release:
- release_firmware(cfg);
return ret;
}
static void mxt_config_cb(const struct firmware *cfg, void *ctx)
{
mxt_configure_objects(ctx, cfg);
+ release_firmware(cfg);
}
static int mxt_initialize(struct mxt_data *data)
projects / openwrt / staging / blogic.git / commitdiff