firmware = ar->normal_mode_fw.fw_file.firmware;
if (firmware)
-@@ -3413,7 +3413,7 @@ int ath10k_debug_register(struct ath10k
+@@ -3422,7 +3422,7 @@ int ath10k_debug_register(struct ath10k
debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR,
ar->debug.debugfs_phy, ar, &fops_nf_cal_period);
&fops_simulate_radar);
--- a/ath10k/mac.c
+++ b/ath10k/mac.c
-@@ -3596,7 +3596,7 @@ static void ath10k_regd_update(struct at
+@@ -3604,7 +3604,7 @@ static void ath10k_regd_update(struct at
regpair = ar->ath_common.regulatory.regpair;
nl_dfs_reg = ar->dfs_detector->region;
wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg);
ath10k_dbg(ar, ATH10K_DBG_REGULATORY,
-@@ -3630,7 +3630,7 @@ static void ath10k_reg_notifier(struct w
+@@ -3638,7 +3638,7 @@ static void ath10k_reg_notifier(struct w
ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "reg-notifier: dfs region 0x%x\n",
request->dfs_region);
result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector,
-@@ -8925,7 +8925,7 @@ int ath10k_mac_register(struct ath10k *a
+@@ -8938,7 +8938,7 @@ int ath10k_mac_register(struct ath10k *a
if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
ar->hw->netdev_features = NETIF_F_HW_CSUM;
/* Init ath dfs pattern detector */
ar->ath_common.debug_mask = ATH_DBG_DFS;
ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common,
-@@ -8970,7 +8970,7 @@ err_unregister:
+@@ -8983,7 +8983,7 @@ err_unregister:
ieee80211_unregister_hw(ar->hw);
err_dfs_detector_exit:
ar->dfs_detector->exit(ar->dfs_detector);
err_free:
-@@ -8985,7 +8985,7 @@ void ath10k_mac_unregister(struct ath10k
+@@ -8998,7 +8998,7 @@ void ath10k_mac_unregister(struct ath10k
{
ieee80211_unregister_hw(ar->hw);
--- a/ath10k/htt_rx.c
+++ b/ath10k/htt_rx.c
-@@ -2497,7 +2497,7 @@ bool ath10k_htt_t2h_msg_handler(struct a
+@@ -2514,7 +2514,7 @@ bool ath10k_htt_t2h_msg_handler(struct a
u32 freq = __le32_to_cpu(resp->chan_change.freq);
ar->tgt_oper_chan =
break;
default:
break;
-@@ -883,13 +883,10 @@ static void ath10k_htt_rx_h_ppdu(struct
+@@ -900,13 +900,10 @@ static void ath10k_htt_rx_h_ppdu(struct
/* New PPDU starts so clear out the old per-PPDU status. */
status->freq = 0;
status->rate_idx = 0;
status->flag |= RX_FLAG_NO_SIGNAL_VAL;
ath10k_htt_rx_h_signal(ar, status, rxd);
-@@ -942,7 +939,7 @@ static void ath10k_process_rx(struct ath
+@@ -959,7 +956,7 @@ static void ath10k_process_rx(struct ath
*status = *rx_status;
ath10k_dbg(ar, ATH10K_DBG_DATA,
skb,
skb->len,
ieee80211_get_SA(hdr),
-@@ -950,15 +947,15 @@ static void ath10k_process_rx(struct ath
+@@ -967,15 +964,15 @@ static void ath10k_process_rx(struct ath
is_multicast_ether_addr(ieee80211_get_DA(hdr)) ?
"mcast" : "ucast",
(__le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4,
--- /dev/null
+From c0cc00f250e19c717fc9cdbdb7f55aaa569c7498 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Thu, 24 Aug 2017 23:06:41 +0200
+Subject: [PATCH] ath10k: activate user space firmware loading again
+
+In commit 9f5bcfe93315 ("ath10k: silence firmware file probing
+warnings") the firmware loading was changed from request_firmware() to
+request_firmware_direct() to silence some warnings in case it fails.
+request_firmware_direct() directly searches in the file system only and
+does not send a hotplug event to user space in case it could not find
+the firmware directly.
+In LEDE we use a user space script to extract the calibration data from
+the flash memory which gets triggered by the hotplug event. This way the
+firmware gets extracted from some vendor specific partition when the
+driver requests this firmware. This mechanism does not work any more
+after this change.
+
+Fixes: 9f5bcfe93315 ("ath10k: silence firmware file probing warnings")
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Cc: Michal Kazior <michal.kazior@tieto.com>
+Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
+---
+ ath10k-4.13/core.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/ath10k-4.13/core.c
++++ b/ath10k-4.13/core.c
+@@ -556,7 +556,7 @@ static const struct firmware *ath10k_fet
+ dir = ".";
+
+ snprintf(filename, sizeof(filename), "%s/%s", dir, file);
+- ret = request_firmware_direct(&fw, filename, ar->dev);
++ ret = request_firmware(&fw, filename, ar->dev);
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot fw request '%s': %d\n",
+ filename, ret);
+