ramips: add support for Huasifei WS1208V2

The Huasifei WS1208V2 is an AC1200 router featuring 5 Ethernet ports with a
Quectel RM520N-GL cellular modem which supports QMI and MBIM modes.

Specifications:
- MT7621AT, 256 MiB RAM, 16 MiB SPI Flash
- MT7603EN 2.4 GHz & MT7612EN 5 GHz WLAN
- Quectel RM520N-GL Cellular Modem
- 2 WLAN & 4 Cellular Antennas
- 5 Gigabit Ethernet Ports
- 1 USB 2.0 port
- 1 PCI-E Slot
- 1 M.2 slot
- 1 SIM card slot
- 1 SD card slot

Installation:
- Install sysupgrade image via ROOter OS.

TFTP Recovery:
- Connect to serial console.
- Boot initramfs image by choosing option 1 when U-Boot prompts.
- Install sysupgrade image via OpenWrt.

Link: https://www.huasifei.com/a/Products/5G%20CPE/240.html
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

diff --git a/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
new file mode 100644 (file)
index 0000000..fe77f65
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_huasifei_ws1208v2.dts
@@ -0,0 +1,185 @@
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "huasifei,ws1208v2", "mediatek,mt7621-soc";
+       model = "Huasifei WS1208V2";
+
+       aliases {
+               led-boot = &led_status;
+               led-failsafe = &led_status;
+               led-running = &led_status;
+               led-upgrade = &led_status;
+               label-mac-device = &gmac0;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               button-reset {
+                       label = "Reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_status: led-status {
+                       label = "green:status";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+
+               led-cellular {
+                       label = "green:cellular";
+                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+               };
+
+               led-wlan5g {
+                       label = "green:wlan5g";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               led-wlan2g {
+                       label = "green:wlan2g";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               led-usb {
+                       label = "green:usb";
+                       gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+                       trigger-sources = <&xhci_ehci_port1>;
+                       linux,default-trigger = "usbport";
+               };
+       };
+};
+
+&sdhci {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+
+                               compatible = "nvmem-cells";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               macaddr_factory_e000: macaddr@e000 {
+                                       reg = <0xe000 0x6>;
+                               };
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               reg = <0x50000 0xfb0000>;
+                               label = "firmware";
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               compatible = "pci14c3,7603";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+       };
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "pci14c3,7662";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+
+               led {
+                       led-sources = <2>;
+               };
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+       ethphy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan4";
+               };
+       };
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index d53f9a27aa589f788f2da00bf826543c1c52bc06..d295f2f8c7d4a7000b16bb3e2a8170a43a16f0ec 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -1068,6 +1068,18 @@ define Device/humax_e10
 endef
 TARGET_DEVICES += humax_e10
 
+define Device/huasifei_ws1208v2
+  $(Device/dsa-migration)
+  $(Device/uimage-lzma-loader)
+  IMAGE_SIZE := 16064k
+  DEVICE_VENDOR := Huasifei
+  DEVICE_MODEL := WS1208V2
+  DEVICE_PACKAGES := kmod-ata-ahci kmod-mt7603 kmod-mt76x2 kmod-sdhci-mt7620 \
+       kmod-usb3 kmod-usb-net-cdc-mbim kmod-usb-net-qmi-wwan \
+       kmod-usb-serial-option
+endef
+TARGET_DEVICES += huasifei_ws1208v2
+
 define Device/iodata_wn-ax1167gr
   $(Device/dsa-migration)
   $(Device/uimage-lzma-loader)

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index 211f1476ca3fd9bf10f658ad6307f0fcefda0f05..f54905cf5c4176d94500114ad42ef584df57425a 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -93,6 +93,9 @@ dlink,dir-882-r1)
 gnubee,gb-pc2)
        ucidef_set_led_netdev "ethyellow" "ethyellow" "orange:ethyellow" "ethyellow" "link tx rx"
        ;;
+huasifei,ws1208v2)
+       ucidef_set_led_netdev "wwan0" "wwan0" "green:cellular" "wwan0" "link tx rx"
+       ;;
 keenetic,kn-3010)
        ucidef_set_led_netdev "internet" "internet" "green:internet" "wan"
        ;;