Since
4e0c54bc5bc8 ("kernel: add support for kernel 5.4"),
the spi-nor limit 4k erasesize to spi-nor chips below a configured size
patch has not functioned as intended.
For uniform erasesize SPI-NOR devices, both
nor->erase_opcode & mtd->erasesize are used in erase operations.
These are set before, and not modified by, this
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT patch.
Thus, an SPI-NOR device with CONFIG_MTD_SPI_NOR_USE_4K_SECTORS will
always use 4k erasesize (where the device supports it).
If this patch was fixed to function as intended, there would be
cases where devices change from a 4K to a 64K erasesize.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
# CONFIG_MTD_SPI_NAND is not set
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
# CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE is not set
CONFIG_MTD_SPLIT=y
# CONFIG_MTD_SPLIT_BCM63XX_FW is not set
CONFIG_MTD_SPI_NOR_SWP_DISABLE_ON_VOLATILE=y
# CONFIG_MTD_SPI_NOR_SWP_KEEP is not set
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
# CONFIG_MTD_SPI_NOR_USE_VARIABLE_ERASE is not set
CONFIG_MTD_SPLIT=y
# CONFIG_MTD_SPLIT_BCM63XX_FW is not set
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 4 Nov 2017 07:40:23 +0100
-Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on
- flash size
-
-Some devices need 4K sectors to be able to deal with small flash chips.
-For instance, w25x05 is 64 KiB in size, and without 4K sectors, the
-entire chip is just one erase block.
-On bigger flash chip sizes, using 4K sectors can significantly slow down
-many operations, including using a writable filesystem. There are several
-platforms where it makes sense to use a single kernel on both kinds of
-devices.
-
-To support this properly, allow configuring an upper flash chip size
-limit for 4K sectors support.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -34,6 +34,17 @@ config MTD_SPI_NOR_USE_4K_SECTORS
- Please note that some tools/drivers/filesystems may not work with
- 4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
-
-+config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT
-+ int "Maximum flash chip size to use 4K sectors on (in KiB)"
-+ depends on MTD_SPI_NOR_USE_4K_SECTORS
-+ default "4096"
-+ help
-+ There are many flash chips that support 4K sectors, but are so large
-+ that using them significantly slows down writing large amounts of
-+ data or using a writable filesystem.
-+ Any flash chip larger than the size specified in this option will
-+ not use 4K sectors.
-+
- source "drivers/mtd/spi-nor/controllers/Kconfig"
-
- endif # MTD_SPI_NOR
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -2801,6 +2801,21 @@ static void spi_nor_info_init_params(str
- */
- erase_mask = 0;
- i = 0;
-+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
-+ if ((info->flags & SECT_4K_PMC) && (params->size <=
-+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
-+ erase_mask |= BIT(i);
-+ spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-+ SPINOR_OP_BE_4K_PMC);
-+ i++;
-+ } else if ((info->flags & SECT_4K) && (params->size <=
-+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
-+ erase_mask |= BIT(i);
-+ spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-+ SPINOR_OP_BE_4K);
-+ i++;
-+ }
-+#else
- if (info->flags & SECT_4K_PMC) {
- erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-@@ -2812,6 +2827,7 @@ static void spi_nor_info_init_params(str
- SPINOR_OP_BE_4K);
- i++;
- }
-+#endif
- erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
- SPINOR_OP_SE);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 4 Nov 2017 07:40:23 +0100
-Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on
- flash size
-
-Some devices need 4K sectors to be able to deal with small flash chips.
-For instance, w25x05 is 64 KiB in size, and without 4K sectors, the
-entire chip is just one erase block.
-On bigger flash chip sizes, using 4K sectors can significantly slow down
-many operations, including using a writable filesystem. There are several
-platforms where it makes sense to use a single kernel on both kinds of
-devices.
-
-To support this properly, allow configuring an upper flash chip size
-limit for 4K sectors support.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -78,6 +78,17 @@ config MTD_SPI_NOR_SWP_KEEP
-
- endchoice
-
-+config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT
-+ int "Maximum flash chip size to use 4K sectors on (in KiB)"
-+ depends on MTD_SPI_NOR_USE_4K_SECTORS
-+ default "4096"
-+ help
-+ There are many flash chips that support 4K sectors, but are so large
-+ that using them significantly slows down writing large amounts of
-+ data or using a writable filesystem.
-+ Any flash chip larger than the size specified in this option will
-+ not use 4K sectors.
-+
- source "drivers/mtd/spi-nor/controllers/Kconfig"
-
- endif # MTD_SPI_NOR
---- a/drivers/mtd/spi-nor/core.c
-+++ b/drivers/mtd/spi-nor/core.c
-@@ -2640,6 +2640,21 @@ static void spi_nor_info_init_params(str
- */
- erase_mask = 0;
- i = 0;
-+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
-+ if ((info->flags & SECT_4K_PMC) && (params->size <=
-+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
-+ erase_mask |= BIT(i);
-+ spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-+ SPINOR_OP_BE_4K_PMC);
-+ i++;
-+ } else if ((info->flags & SECT_4K) && (params->size <=
-+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
-+ erase_mask |= BIT(i);
-+ spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-+ SPINOR_OP_BE_4K);
-+ i++;
-+ }
-+#else
- if (info->flags & SECT_4K_PMC) {
- erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], 4096u,
-@@ -2651,6 +2666,7 @@ static void spi_nor_info_init_params(str
- SPINOR_OP_BE_4K);
- i++;
- }
-+#endif
- erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
- SPINOR_OP_SE);
CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_FIT_FW=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SPI_NAND=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
CONFIG_MTD_SPLIT_JIMAGE_FW=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_TPLINK_FW=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
CONFIG_MTD_SPLIT_JIMAGE_FW=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_NEED_DMA_MAP_STATE=y
projects / openwrt / staging / ansuel.git / commitdiff