scb_ampdu->max_rx_ampdu_bytes = max_rx_ampdu_bytes;
}
+void brcms_c_ampdu_reset_session(struct brcms_ampdu_session *session,
+ struct brcms_c_info *wlc)
+{
+ session->wlc = wlc;
+ skb_queue_head_init(&session->skb_list);
+ session->max_ampdu_len = 0; /* determined from first MPDU */
+ session->max_ampdu_frames = 0; /* determined from first MPDU */
+ session->ampdu_len = 0;
+ session->dma_len = 0;
+}
+
+/*
+ * Preps the given packet for AMPDU based on the session data. If the
+ * frame cannot be accomodated in the current session, -ENOSPC is
+ * returned.
+ */
+int brcms_c_ampdu_add_frame(struct brcms_ampdu_session *session,
+ struct sk_buff *p)
+{
+ struct brcms_c_info *wlc = session->wlc;
+ struct ampdu_info *ampdu = wlc->ampdu;
+ struct scb *scb = &wlc->pri_scb;
+ struct scb_ampdu *scb_ampdu = &scb->scb_ampdu;
+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(p);
+ struct ieee80211_tx_rate *txrate = tx_info->status.rates;
+ struct d11txh *txh = (struct d11txh *)p->data;
+ unsigned ampdu_frames;
+ u8 ndelim, tid;
+ u8 *plcp;
+ uint len;
+ u16 mcl;
+ bool fbr_iscck;
+ bool rr;
+
+ ndelim = txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM];
+ plcp = (u8 *)(txh + 1);
+ fbr_iscck = !(le16_to_cpu(txh->XtraFrameTypes) & 0x03);
+ len = fbr_iscck ? BRCMS_GET_CCK_PLCP_LEN(txh->FragPLCPFallback) :
+ BRCMS_GET_MIMO_PLCP_LEN(txh->FragPLCPFallback);
+ len = roundup(len, 4) + (ndelim + 1) * AMPDU_DELIMITER_LEN;
+
+ ampdu_frames = skb_queue_len(&session->skb_list);
+ if (ampdu_frames != 0) {
+ struct sk_buff *first;
+
+ if (ampdu_frames + 1 > session->max_ampdu_frames ||
+ session->ampdu_len + len > session->max_ampdu_len)
+ return -ENOSPC;
+
+ /*
+ * We aren't really out of space if the new frame is of
+ * a different priority, but we want the same behaviour
+ * so return -ENOSPC anyway.
+ *
+ * XXX: The old AMPDU code did this, but is it really
+ * necessary?
+ */
+ first = skb_peek(&session->skb_list);
+ if (p->priority != first->priority)
+ return -ENOSPC;
+ }
+
+ /*
+ * Now that we're sure this frame can be accomodated, update the
+ * session information.
+ */
+ session->ampdu_len += len;
+ session->dma_len += p->len;
+
+ tid = (u8)p->priority;
+
+ /* Handle retry limits */
+ if (txrate[0].count <= ampdu->rr_retry_limit_tid[tid]) {
+ txrate[0].count++;
+ rr = true;
+ } else {
+ txrate[1].count++;
+ rr = false;
+ }
+
+ if (ampdu_frames == 0) {
+ u8 plcp0, plcp3, is40, sgi, mcs;
+ uint fifo = le16_to_cpu(txh->TxFrameID) & TXFID_QUEUE_MASK;
+ struct brcms_fifo_info *f = &du->fifo_tb[fifo];
+
+ if (rr) {
+ plcp0 = plcp[0];
+ plcp3 = plcp[3];
+ } else {
+ plcp0 = txh->FragPLCPFallback[0];
+ plcp3 = txh->FragPLCPFallback[3];
+
+ }
+
+ /* Limit AMPDU size based on MCS */
+ is40 = (plcp0 & MIMO_PLCP_40MHZ) ? 1 : 0;
+ sgi = plcp3_issgi(plcp3) ? 1 : 0;
+ mcs = plcp0 & ~MIMO_PLCP_40MHZ;
+ session->max_ampdu_len = min(scb_ampdu->max_rx_ampdu_bytes,
+ ampdu->max_txlen[mcs][is40][sgi]);
+
+ session->max_ampdu_frames = scb_ampdu->max_pdu;
+ if (mcs_2_rate(mcs, true, false) >= f->dmaxferrate) {
+ session->max_ampdu_frames =
+ min_t(u16, f->mcs2ampdu_table[mcs],
+ session->max_ampdu_frames);
+ }
+ }
+
+ /*
+ * Treat all frames as "middle" frames of AMPDU here. First and
+ * last frames must be fixed up after all MPDUs have been prepped.
+ */
+ mcl = le16_to_cpu(txh->MacTxControlLow);
+ mcl &= ~TXC_AMPDU_MASK;
+ mcl |= (TXC_AMPDU_MIDDLE << TXC_AMPDU_SHIFT);
+ mcl &= ~(TXC_STARTMSDU | TXC_SENDRTS | TXC_SENDCTS);
+ txh->MacTxControlLow = cpu_to_le16(mcl);
+ txh->PreloadSize = 0; /* always default to 0 */
+
+ skb_queue_tail(&session->skb_list, p);
+
+ return 0;
+}
+
+void brcms_c_ampdu_finalize(struct brcms_ampdu_session *session)
+{
+ struct brcms_c_info *wlc = session->wlc;
+ struct ampdu_info *ampdu = wlc->ampdu;
+ struct sk_buff *first, *last;
+ struct d11txh *txh;
+ struct ieee80211_tx_info *tx_info;
+ struct ieee80211_tx_rate *txrate;
+ u8 ndelim;
+ u8 *plcp;
+ uint len;
+ uint fifo;
+ struct brcms_fifo_info *f;
+ u16 mcl;
+ bool fbr;
+ bool fbr_iscck;
+ struct ieee80211_rts *rts;
+ bool use_rts = false, use_cts = false;
+ u16 dma_len = session->dma_len;
+ u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ;
+ u32 rspec = 0, rspec_fallback = 0;
+ u32 rts_rspec = 0, rts_rspec_fallback = 0;
+ u8 plcp0, plcp3, is40, sgi, mcs;
+ u16 mch;
+ u8 preamble_type = BRCMS_GF_PREAMBLE;
+ u8 fbr_preamble_type = BRCMS_GF_PREAMBLE;
+ u8 rts_preamble_type = BRCMS_LONG_PREAMBLE;
+ u8 rts_fbr_preamble_type = BRCMS_LONG_PREAMBLE;
+
+ if (skb_queue_empty(&session->skb_list))
+ return;
+
+ first = skb_peek(&session->skb_list);
+ last = skb_peek_tail(&session->skb_list);
+
+ /* Need to fix up last MPDU first to adjust AMPDU length */
+ txh = (struct d11txh *)last->data;
+ fifo = le16_to_cpu(txh->TxFrameID) & TXFID_QUEUE_MASK;
+ f = &du->fifo_tb[fifo];
+
+ mcl = le16_to_cpu(txh->MacTxControlLow);
+ mcl &= ~TXC_AMPDU_MASK;
+ mcl |= (TXC_AMPDU_LAST << TXC_AMPDU_SHIFT);
+ txh->MacTxControlLow = cpu_to_le16(mcl);
+
+ /* remove the null delimiter after last mpdu */
+ ndelim = txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM];
+ txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM] = 0;
+ session->ampdu_len -= ndelim * AMPDU_DELIMITER_LEN;
+
+ /* remove the pad len from last mpdu */
+ fbr_iscck = ((le16_to_cpu(txh->XtraFrameTypes) & 0x3) == 0);
+ len = fbr_iscck ? BRCMS_GET_CCK_PLCP_LEN(txh->FragPLCPFallback) :
+ BRCMS_GET_MIMO_PLCP_LEN(txh->FragPLCPFallback);
+ session->ampdu_len -= roundup(len, 4) - len;
+
+ /* Now fix up the first MPDU */
+ tx_info = IEEE80211_SKB_CB(first);
+ txrate = tx_info->status.rates;
+ txh = (struct d11txh *)first->data;
+ plcp = (u8 *)(txh + 1);
+ rts = (struct ieee80211_rts *)&txh->rts_frame;
+
+ mcl = le16_to_cpu(txh->MacTxControlLow);
+ /* If only one MPDU leave it marked as last */
+ if (first != last) {
+ mcl &= ~TXC_AMPDU_MASK;
+ mcl |= (TXC_AMPDU_FIRST << TXC_AMPDU_SHIFT);
+ }
+ mcl |= TXC_STARTMSDU;
+ if (ieee80211_is_rts(rts->frame_control)) {
+ mcl |= TXC_SENDRTS;
+ use_rts = true;
+ }
+ if (ieee80211_is_cts(rts->frame_control)) {
+ mcl |= TXC_SENDCTS;
+ use_cts = true;
+ }
+ txh->MacTxControlLow = cpu_to_le16(mcl);
+
+ fbr = txrate[1].count > 0;
+ if (!fbr) {
+ plcp0 = plcp[0];
+ plcp3 = plcp[3];
+ } else {
+ plcp0 = txh->FragPLCPFallback[0];
+ plcp3 = txh->FragPLCPFallback[3];
+ }
+ is40 = (plcp0 & MIMO_PLCP_40MHZ) ? 1 : 0;
+ sgi = plcp3_issgi(plcp3) ? 1 : 0;
+ mcs = plcp0 & ~MIMO_PLCP_40MHZ;
+
+ if (is40) {
+ if (CHSPEC_SB_UPPER(wlc_phy_chanspec_get(wlc->band->pi)))
+ mimo_ctlchbw = PHY_TXC1_BW_20MHZ_UP;
+ else
+ mimo_ctlchbw = PHY_TXC1_BW_20MHZ;
+ }
+
+ /* rebuild the rspec and rspec_fallback */
+ rspec = RSPEC_MIMORATE;
+ rspec |= plcp[0] & ~MIMO_PLCP_40MHZ;
+ if (plcp[0] & MIMO_PLCP_40MHZ)
+ rspec |= (PHY_TXC1_BW_40MHZ << RSPEC_BW_SHIFT);
+
+ fbr_iscck = !(le16_to_cpu(txh->XtraFrameTypes) & 0x03);
+ if (fbr_iscck) {
+ rspec_fallback =
+ cck_rspec(cck_phy2mac_rate(txh->FragPLCPFallback[0]));
+ } else {
+ rspec_fallback = RSPEC_MIMORATE;
+ rspec_fallback |= txh->FragPLCPFallback[0] & ~MIMO_PLCP_40MHZ;
+ if (txh->FragPLCPFallback[0] & MIMO_PLCP_40MHZ)
+ rspec_fallback |= PHY_TXC1_BW_40MHZ << RSPEC_BW_SHIFT;
+ }
+
+ if (use_rts || use_cts) {
+ rts_rspec =
+ brcms_c_rspec_to_rts_rspec(wlc, rspec,
+ false, mimo_ctlchbw);
+ rts_rspec_fallback =
+ brcms_c_rspec_to_rts_rspec(wlc, rspec_fallback,
+ false, mimo_ctlchbw);
+ }
+
+ BRCMS_SET_MIMO_PLCP_LEN(plcp, session->ampdu_len);
+ /* mark plcp to indicate ampdu */
+ BRCMS_SET_MIMO_PLCP_AMPDU(plcp);
+
+ /* reset the mixed mode header durations */
+ if (txh->MModeLen) {
+ u16 mmodelen = brcms_c_calc_lsig_len(wlc, rspec,
+ session->ampdu_len);
+ txh->MModeLen = cpu_to_le16(mmodelen);
+ preamble_type = BRCMS_MM_PREAMBLE;
+ }
+ if (txh->MModeFbrLen) {
+ u16 mmfbrlen = brcms_c_calc_lsig_len(wlc, rspec_fallback,
+ session->ampdu_len);
+ txh->MModeFbrLen = cpu_to_le16(mmfbrlen);
+ fbr_preamble_type = BRCMS_MM_PREAMBLE;
+ }
+
+ /* set the preload length */
+ if (mcs_2_rate(mcs, true, false) >= f->dmaxferrate) {
+ dma_len = min(dma_len, f->ampdu_pld_size);
+ txh->PreloadSize = cpu_to_le16(dma_len);
+ } else {
+ txh->PreloadSize = 0;
+ }
+
+ mch = le16_to_cpu(txh->MacTxControlHigh);
+
+ /* update RTS dur fields */
+ if (use_rts || use_cts) {
+ u16 durid;
+ if ((mch & TXC_PREAMBLE_RTS_MAIN_SHORT) ==
+ TXC_PREAMBLE_RTS_MAIN_SHORT)
+ rts_preamble_type = BRCMS_SHORT_PREAMBLE;
+
+ if ((mch & TXC_PREAMBLE_RTS_FB_SHORT) ==
+ TXC_PREAMBLE_RTS_FB_SHORT)
+ rts_fbr_preamble_type = BRCMS_SHORT_PREAMBLE;
+
+ durid = brcms_c_compute_rtscts_dur(wlc, use_cts, rts_rspec,
+ rspec, rts_preamble_type,
+ preamble_type,
+ session->ampdu_len, true);
+ rts->duration = cpu_to_le16(durid);
+ durid = brcms_c_compute_rtscts_dur(wlc, use_cts,
+ rts_rspec_fallback,
+ rspec_fallback,
+ rts_fbr_preamble_type,
+ fbr_preamble_type,
+ session->ampdu_len, true);
+ txh->RTSDurFallback = cpu_to_le16(durid);
+ /* set TxFesTimeNormal */
+ txh->TxFesTimeNormal = rts->duration;
+ /* set fallback rate version of TxFesTimeNormal */
+ txh->TxFesTimeFallback = txh->RTSDurFallback;
+ }
+
+ /* set flag and plcp for fallback rate */
+ if (fbr) {
+ mch |= TXC_AMPDU_FBR;
+ txh->MacTxControlHigh = cpu_to_le16(mch);
+ BRCMS_SET_MIMO_PLCP_AMPDU(plcp);
+ BRCMS_SET_MIMO_PLCP_AMPDU(txh->FragPLCPFallback);
+ }
+
+ BCMMSG(wlc->wiphy, "wl%d: count %d ampdu_len %d\n",
+ wlc->pub->unit, skb_queue_len(&session->skb_list),
+ session->ampdu_len);
+}
+
int
brcms_c_sendampdu(struct ampdu_info *ampdu, struct brcms_txq_info *qi,
struct sk_buff **pdu, int prec)
{
struct brcms_c_info *wlc;
- struct sk_buff *p, *pkt[AMPDU_MAX_MPDU];
- u8 tid, ndelim;
+ struct sk_buff *p;
+ struct brcms_ampdu_session session;
int err = 0;
- u8 preamble_type = BRCMS_GF_PREAMBLE;
- u8 fbr_preamble_type = BRCMS_GF_PREAMBLE;
- u8 rts_preamble_type = BRCMS_LONG_PREAMBLE;
- u8 rts_fbr_preamble_type = BRCMS_LONG_PREAMBLE;
+ u8 tid;
- bool rr = true, fbr = false;
- uint i, count = 0, fifo, seg_cnt = 0;
- u16 plen, len, seq = 0, mcl, mch, index, frameid, dma_len = 0;
- u32 ampdu_len, max_ampdu_bytes = 0;
- struct d11txh *txh = NULL;
- u8 *plcp;
- struct ieee80211_hdr *h;
+ uint count, fifo, seg_cnt = 0;
struct scb *scb;
struct scb_ampdu *scb_ampdu;
struct scb_ampdu_tid_ini *ini;
- u8 mcs = 0;
- bool use_rts = false, use_cts = false;
- u32 rspec = 0, rspec_fallback = 0;
- u32 rts_rspec = 0, rts_rspec_fallback = 0;
- u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ;
- struct ieee80211_rts *rts;
- u8 rr_retry_limit;
struct brcms_fifo_info *f;
- bool fbr_iscck;
struct ieee80211_tx_info *tx_info;
u16 qlen;
struct wiphy *wiphy;
return -EBUSY;
/* at this point we intend to transmit an AMPDU */
- rr_retry_limit = ampdu->rr_retry_limit_tid[tid];
- ampdu_len = 0;
- dma_len = 0;
+ brcms_c_ampdu_reset_session(&session, wlc);
+
while (p) {
struct ieee80211_tx_rate *txrate;
if (err) {
if (err == -EBUSY) {
wiphy_err(wiphy, "wl%d: sendampdu: "
- "prep_xdu retry; seq 0x%x\n",
- wlc->pub->unit, seq);
+ "prep_xdu retry\n", wlc->pub->unit);
*pdu = p;
break;
}
/* error in the packet; reject it */
wiphy_err(wiphy, "wl%d: sendampdu: prep_xdu "
- "rejected; seq 0x%x\n", wlc->pub->unit, seq);
+ "rejected\n", wlc->pub->unit);
*pdu = NULL;
break;
}
- /* pkt is good to be aggregated */
- txh = (struct d11txh *) p->data;
- plcp = (u8 *) (txh + 1);
- h = (struct ieee80211_hdr *)(plcp + D11_PHY_HDR_LEN);
- seq = le16_to_cpu(h->seq_ctrl) >> SEQNUM_SHIFT;
- index = TX_SEQ_TO_INDEX(seq);
-
- /* check mcl fields and test whether it can be agg'd */
- mcl = le16_to_cpu(txh->MacTxControlLow);
- mcl &= ~TXC_AMPDU_MASK;
- fbr_iscck = !(le16_to_cpu(txh->XtraFrameTypes) & 0x3);
- txh->PreloadSize = 0; /* always default to 0 */
-
- /* Handle retry limits */
- if (txrate[0].count <= rr_retry_limit) {
- txrate[0].count++;
- rr = true;
- fbr = false;
- } else {
- fbr = true;
- rr = false;
- txrate[1].count++;
- }
-
- /* extract the length info */
- len = fbr_iscck ? BRCMS_GET_CCK_PLCP_LEN(txh->FragPLCPFallback)
- : BRCMS_GET_MIMO_PLCP_LEN(txh->FragPLCPFallback);
-
- /* retrieve null delimiter count */
- ndelim = txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM];
- seg_cnt += 1;
-
- BCMMSG(wlc->wiphy, "wl%d: mpdu %d plcp_len %d\n",
- wlc->pub->unit, count, len);
-
- /*
- * aggregateable mpdu. For ucode/hw agg,
- * test whether need to break or change the epoch
- */
- if (count == 0) {
- mcl |= (TXC_AMPDU_FIRST << TXC_AMPDU_SHIFT);
- /* refill the bits since might be a retx mpdu */
- mcl |= TXC_STARTMSDU;
- rts = (struct ieee80211_rts *)&txh->rts_frame;
-
- if (ieee80211_is_rts(rts->frame_control)) {
- mcl |= TXC_SENDRTS;
- use_rts = true;
- }
- if (ieee80211_is_cts(rts->frame_control)) {
- mcl |= TXC_SENDCTS;
- use_cts = true;
- }
- } else {
- mcl |= (TXC_AMPDU_MIDDLE << TXC_AMPDU_SHIFT);
- mcl &= ~(TXC_STARTMSDU | TXC_SENDRTS | TXC_SENDCTS);
- }
-
- len = roundup(len, 4);
- ampdu_len += (len + (ndelim + 1) * AMPDU_DELIMITER_LEN);
-
- dma_len += (u16) p->len;
-
- BCMMSG(wlc->wiphy, "wl%d: ampdu_len %d"
- " seg_cnt %d null delim %d\n",
- wlc->pub->unit, ampdu_len, seg_cnt, ndelim);
-
- txh->MacTxControlLow = cpu_to_le16(mcl);
-
- /* this packet is added */
- pkt[count++] = p;
-
- /* patch the first MPDU */
- if (count == 1) {
- u8 plcp0, plcp3, is40, sgi;
-
- if (rr) {
- plcp0 = plcp[0];
- plcp3 = plcp[3];
- } else {
- plcp0 = txh->FragPLCPFallback[0];
- plcp3 = txh->FragPLCPFallback[3];
-
- }
- is40 = (plcp0 & MIMO_PLCP_40MHZ) ? 1 : 0;
- sgi = plcp3_issgi(plcp3) ? 1 : 0;
- mcs = plcp0 & ~MIMO_PLCP_40MHZ;
- max_ampdu_bytes =
- min(scb_ampdu->max_rx_ampdu_bytes,
- ampdu->max_txlen[mcs][is40][sgi]);
-
- if (is40)
- mimo_ctlchbw =
- CHSPEC_SB_UPPER(wlc_phy_chanspec_get(
- wlc->band->pi))
- ? PHY_TXC1_BW_20MHZ_UP : PHY_TXC1_BW_20MHZ;
-
- /* rebuild the rspec and rspec_fallback */
- rspec = RSPEC_MIMORATE;
- rspec |= plcp[0] & ~MIMO_PLCP_40MHZ;
- if (plcp[0] & MIMO_PLCP_40MHZ)
- rspec |= (PHY_TXC1_BW_40MHZ << RSPEC_BW_SHIFT);
-
- if (fbr_iscck) /* CCK */
- rspec_fallback = cck_rspec(cck_phy2mac_rate
- (txh->FragPLCPFallback[0]));
- else { /* MIMO */
- rspec_fallback = RSPEC_MIMORATE;
- rspec_fallback |=
- txh->FragPLCPFallback[0] & ~MIMO_PLCP_40MHZ;
- if (txh->FragPLCPFallback[0] & MIMO_PLCP_40MHZ)
- rspec_fallback |=
- (PHY_TXC1_BW_40MHZ <<
- RSPEC_BW_SHIFT);
- }
-
- if (use_rts || use_cts) {
- rts_rspec =
- brcms_c_rspec_to_rts_rspec(wlc,
- rspec, false, mimo_ctlchbw);
- rts_rspec_fallback =
- brcms_c_rspec_to_rts_rspec(wlc,
- rspec_fallback, false, mimo_ctlchbw);
- }
- }
-
- /* if (first mpdu for host agg) */
- /* test whether to add more */
- if ((mcs_2_rate(mcs, true, false) >= f->dmaxferrate) &&
- (count == f->mcs2ampdu_table[mcs])) {
- BCMMSG(wlc->wiphy, "wl%d: PR 37644: stopping"
- " ampdu at %d for mcs %d\n",
- wlc->pub->unit, count, mcs);
+ err = brcms_c_ampdu_add_frame(&session, p);
+ if (err == -ENOSPC) {
+ /*
+ * No space for this packet in the AMPDU.
+ * Requeue packet and proceed;
+ */
+ *pdu = p;
+ break;
+ } else if (err) {
+ /* Unexpected error; reject packet */
+ wiphy_err(wiphy, "wl%d: sendampdu: add_frame rejected",
+ wlc->pub->unit);
+ *pdu = NULL;
break;
}
- if (count == scb_ampdu->max_pdu)
- break;
+ seg_cnt += 1;
/*
* check to see if the next pkt is
p = pktq_ppeek(&qi->q, prec);
if (p) {
tx_info = IEEE80211_SKB_CB(p);
- if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) &&
- ((u8) (p->priority) == tid)) {
- plen = p->len + AMPDU_MAX_MPDU_OVERHEAD;
- plen = max(scb_ampdu->min_len, plen);
-
- if ((plen + ampdu_len) > max_ampdu_bytes) {
- p = NULL;
- continue;
- }
-
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
/*
* check if there are enough
* descriptors available
*/
if (*wlc->core->txavail[fifo] <= seg_cnt + 1) {
- wiphy_err(wiphy, "%s: No fifo space "
+ wiphy_err(wiphy, "%s: No fifo space "
"!!\n", __func__);
p = NULL;
continue;
}
} /* end while(p) */
+ count = skb_queue_len(&session.skb_list);
ini->tx_in_transit += count;
if (count) {
- /* patch up the last txh */
- txh = (struct d11txh *) pkt[count - 1]->data;
- mcl = le16_to_cpu(txh->MacTxControlLow);
- mcl &= ~TXC_AMPDU_MASK;
- mcl |= (TXC_AMPDU_LAST << TXC_AMPDU_SHIFT);
- txh->MacTxControlLow = cpu_to_le16(mcl);
-
- /* remove the null delimiter after last mpdu */
- ndelim = txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM];
- txh->RTSPLCPFallback[AMPDU_FBR_NULL_DELIM] = 0;
- ampdu_len -= ndelim * AMPDU_DELIMITER_LEN;
-
- /* remove the pad len from last mpdu */
- fbr_iscck = ((le16_to_cpu(txh->XtraFrameTypes) & 0x3) == 0);
- len = fbr_iscck ? BRCMS_GET_CCK_PLCP_LEN(txh->FragPLCPFallback)
- : BRCMS_GET_MIMO_PLCP_LEN(txh->FragPLCPFallback);
- ampdu_len -= roundup(len, 4) - len;
-
- /* patch up the first txh & plcp */
- txh = (struct d11txh *) pkt[0]->data;
- plcp = (u8 *) (txh + 1);
-
- BRCMS_SET_MIMO_PLCP_LEN(plcp, ampdu_len);
- /* mark plcp to indicate ampdu */
- BRCMS_SET_MIMO_PLCP_AMPDU(plcp);
-
- /* reset the mixed mode header durations */
- if (txh->MModeLen) {
- u16 mmodelen =
- brcms_c_calc_lsig_len(wlc, rspec, ampdu_len);
- txh->MModeLen = cpu_to_le16(mmodelen);
- preamble_type = BRCMS_MM_PREAMBLE;
- }
- if (txh->MModeFbrLen) {
- u16 mmfbrlen =
- brcms_c_calc_lsig_len(wlc, rspec_fallback,
- ampdu_len);
- txh->MModeFbrLen = cpu_to_le16(mmfbrlen);
- fbr_preamble_type = BRCMS_MM_PREAMBLE;
- }
-
- /* set the preload length */
- if (mcs_2_rate(mcs, true, false) >= f->dmaxferrate) {
- dma_len = min(dma_len, f->ampdu_pld_size);
- txh->PreloadSize = cpu_to_le16(dma_len);
- } else
- txh->PreloadSize = 0;
-
- mch = le16_to_cpu(txh->MacTxControlHigh);
-
- /* update RTS dur fields */
- if (use_rts || use_cts) {
- u16 durid;
- rts = (struct ieee80211_rts *)&txh->rts_frame;
- if ((mch & TXC_PREAMBLE_RTS_MAIN_SHORT) ==
- TXC_PREAMBLE_RTS_MAIN_SHORT)
- rts_preamble_type = BRCMS_SHORT_PREAMBLE;
-
- if ((mch & TXC_PREAMBLE_RTS_FB_SHORT) ==
- TXC_PREAMBLE_RTS_FB_SHORT)
- rts_fbr_preamble_type = BRCMS_SHORT_PREAMBLE;
-
- durid =
- brcms_c_compute_rtscts_dur(wlc, use_cts, rts_rspec,
- rspec, rts_preamble_type,
- preamble_type, ampdu_len,
- true);
- rts->duration = cpu_to_le16(durid);
- durid = brcms_c_compute_rtscts_dur(wlc, use_cts,
- rts_rspec_fallback,
- rspec_fallback,
- rts_fbr_preamble_type,
- fbr_preamble_type,
- ampdu_len, true);
- txh->RTSDurFallback = cpu_to_le16(durid);
- /* set TxFesTimeNormal */
- txh->TxFesTimeNormal = rts->duration;
- /* set fallback rate version of TxFesTimeNormal */
- txh->TxFesTimeFallback = txh->RTSDurFallback;
- }
-
- /* set flag and plcp for fallback rate */
- if (fbr) {
- mch |= TXC_AMPDU_FBR;
- txh->MacTxControlHigh = cpu_to_le16(mch);
- BRCMS_SET_MIMO_PLCP_AMPDU(plcp);
- BRCMS_SET_MIMO_PLCP_AMPDU(txh->FragPLCPFallback);
- }
-
- BCMMSG(wlc->wiphy, "wl%d: count %d ampdu_len %d\n",
- wlc->pub->unit, count, ampdu_len);
-
- /* inform rate_sel if it this is a rate probe pkt */
- frameid = le16_to_cpu(txh->TxFrameID);
- if (frameid & TXFID_RATE_PROBE_MASK)
- wiphy_err(wiphy, "%s: XXX what to do with "
- "TXFID_RATE_PROBE_MASK!?\n", __func__);
-
- for (i = 0; i < count; i++)
- brcms_c_txfifo(wlc, fifo, pkt[i], i == (count - 1),
- ampdu->txpkt_weight);
+ /* patch up first and last txh's */
+ brcms_c_ampdu_finalize(&session);
+ while ((p = skb_dequeue(&session.skb_list)) != NULL)
+ brcms_c_txfifo(wlc, fifo, p,
+ skb_queue_empty(&session.skb_list),
+ ampdu->txpkt_weight);
}
/* endif (count) */
return err;
projects / openwrt / staging / blogic.git / commitdiff