There are a couple of assembly functions which are invoked only locally
in the file they are defined. In C, they are marked "static". In
assembly, annotate them using SYM_{FUNC,CODE}_START_LOCAL (and switch
their ENDPROC to SYM_{FUNC,CODE}_END too). Whether FUNC or CODE is used,
depends on whether ENDPROC or END was used for a particular function
before.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-efi <linux-efi@vger.kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: xen-devel@lists.xenproject.org
Link: https://lkml.kernel.org/r/20191011115108.12392-21-jslaby@suse.cz
ret
ENDPROC(efi64_thunk)
-ENTRY(efi_exit32)
+SYM_FUNC_START_LOCAL(efi_exit32)
movq func_rt_ptr(%rip), %rax
push %rax
mov %rdi, %rax
ret
-ENDPROC(efi_exit32)
+SYM_FUNC_END(efi_exit32)
.code32
/*
*
* The stack should represent the 32-bit calling convention.
*/
-ENTRY(efi_enter32)
+SYM_FUNC_START_LOCAL(efi_enter32)
movl $__KERNEL_DS, %eax
movl %eax, %ds
movl %eax, %es
btsl $X86_CR0_PG_BIT, %eax
movl %eax, %cr0
lret
-ENDPROC(efi_enter32)
+SYM_FUNC_END(efi_enter32)
.data
.balign 8
* existing activation in its critical region -- if so, we pop the current
* activation and restart the handler using the previous one.
*/
-ENTRY(xen_do_hypervisor_callback) /* do_hypervisor_callback(struct *pt_regs) */
+/* do_hypervisor_callback(struct *pt_regs) */
+SYM_CODE_START_LOCAL(xen_do_hypervisor_callback)
/*
* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
call xen_maybe_preempt_hcall
#endif
jmp error_exit
-END(xen_do_hypervisor_callback)
+SYM_CODE_END(xen_do_hypervisor_callback)
/*
* Hypervisor uses this for application faults while it executes.
* Use slow, but surefire "are we in kernel?" check.
* Return: ebx=0: need swapgs on exit, ebx=1: otherwise
*/
-ENTRY(paranoid_entry)
+SYM_CODE_START_LOCAL(paranoid_entry)
UNWIND_HINT_FUNC
cld
PUSH_AND_CLEAR_REGS save_ret=1
FENCE_SWAPGS_KERNEL_ENTRY
ret
-END(paranoid_entry)
+SYM_CODE_END(paranoid_entry)
/*
* "Paranoid" exit path from exception stack. This is invoked
*
* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it)
*/
-ENTRY(paranoid_exit)
+SYM_CODE_START_LOCAL(paranoid_exit)
UNWIND_HINT_REGS
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF_DEBUG
RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
.Lparanoid_exit_restore:
jmp restore_regs_and_return_to_kernel
-END(paranoid_exit)
+SYM_CODE_END(paranoid_exit)
/*
* Save all registers in pt_regs, and switch GS if needed.
*/
-ENTRY(error_entry)
+SYM_CODE_START_LOCAL(error_entry)
UNWIND_HINT_FUNC
cld
PUSH_AND_CLEAR_REGS save_ret=1
call fixup_bad_iret
mov %rax, %rsp
jmp .Lerror_entry_from_usermode_after_swapgs
-END(error_entry)
+SYM_CODE_END(error_entry)
-ENTRY(error_exit)
+SYM_CODE_START_LOCAL(error_exit)
UNWIND_HINT_REGS
DISABLE_INTERRUPTS(CLBR_ANY)
TRACE_IRQS_OFF
testb $3, CS(%rsp)
jz retint_kernel
jmp .Lretint_user
-END(error_exit)
+SYM_CODE_END(error_exit)
/*
* Runs on exception stack. Xen PV does not go through this path at all,
ENDPROC(copy_page)
EXPORT_SYMBOL(copy_page)
-ENTRY(copy_page_regs)
+SYM_FUNC_START_LOCAL(copy_page_regs)
subq $2*8, %rsp
movq %rbx, (%rsp)
movq %r12, 1*8(%rsp)
movq 1*8(%rsp), %r12
addq $2*8, %rsp
ret
-ENDPROC(copy_page_regs)
+SYM_FUNC_END(copy_page_regs)
* rax original destination
*/
SYM_FUNC_START_ALIAS(__memcpy)
-ENTRY(memcpy)
+SYM_FUNC_START_LOCAL(memcpy)
ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
"jmp memcpy_erms", X86_FEATURE_ERMS
movl %edx, %ecx
rep movsb
ret
-ENDPROC(memcpy)
+SYM_FUNC_END(memcpy)
SYM_FUNC_END_ALIAS(__memcpy)
EXPORT_SYMBOL(memcpy)
EXPORT_SYMBOL(__memcpy)
* memcpy_erms() - enhanced fast string memcpy. This is faster and
* simpler than memcpy. Use memcpy_erms when possible.
*/
-ENTRY(memcpy_erms)
+SYM_FUNC_START_LOCAL(memcpy_erms)
movq %rdi, %rax
movq %rdx, %rcx
rep movsb
ret
-ENDPROC(memcpy_erms)
+SYM_FUNC_END(memcpy_erms)
-ENTRY(memcpy_orig)
+SYM_FUNC_START_LOCAL(memcpy_orig)
movq %rdi, %rax
cmpq $0x20, %rdx
.Lend:
retq
-ENDPROC(memcpy_orig)
+SYM_FUNC_END(memcpy_orig)
#ifndef CONFIG_UML
*
* rax original destination
*/
-ENTRY(memset_erms)
+SYM_FUNC_START_LOCAL(memset_erms)
movq %rdi,%r9
movb %sil,%al
movq %rdx,%rcx
rep stosb
movq %r9,%rax
ret
-ENDPROC(memset_erms)
+SYM_FUNC_END(memset_erms)
-ENTRY(memset_orig)
+SYM_FUNC_START_LOCAL(memset_orig)
movq %rdi,%r10
/* expand byte value */
subq %r8,%rdx
jmp .Lafter_bad_alignment
.Lfinal:
-ENDPROC(memset_orig)
+SYM_FUNC_END(memset_orig)
*
* This function must be invoked with a 1:1 mapped stack.
*/
-ENTRY(__efi64_thunk)
+SYM_FUNC_START_LOCAL(__efi64_thunk)
movl %ds, %eax
push %rax
movl %es, %eax
or %rcx, %rax
1:
ret
-ENDPROC(__efi64_thunk)
+SYM_FUNC_END(__efi64_thunk)
-ENTRY(efi_exit32)
+SYM_FUNC_START_LOCAL(efi_exit32)
movq func_rt_ptr(%rip), %rax
push %rax
mov %rdi, %rax
ret
-ENDPROC(efi_exit32)
+SYM_FUNC_END(efi_exit32)
.code32
/*
*
* The stack should represent the 32-bit calling convention.
*/
-ENTRY(efi_enter32)
+SYM_FUNC_START_LOCAL(efi_enter32)
movl $__KERNEL_DS, %eax
movl %eax, %ds
movl %eax, %es
pushl %eax
lret
-ENDPROC(efi_enter32)
+SYM_FUNC_END(efi_enter32)
.data
.balign 8
#define PVH_DS_SEL (PVH_GDT_ENTRY_DS * 8)
#define PVH_CANARY_SEL (PVH_GDT_ENTRY_CANARY * 8)
-ENTRY(pvh_start_xen)
+SYM_CODE_START_LOCAL(pvh_start_xen)
cld
lgdt (_pa(gdt))
ljmp $PVH_CS_SEL, $_pa(startup_32)
#endif
-END(pvh_start_xen)
+SYM_CODE_END(pvh_start_xen)
.section ".init.data","aw"
.balign 8
projects / openwrt / staging / blogic.git / commitdiff