+++ /dev/null
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -593,6 +593,13 @@
- cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
- load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
-
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX) += arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX) += -Iinclude/asm-mips/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX) += 0xffffffff80060000
-+
- # temporary until string.h is fixed
- cflags-y += -ffreestanding
-
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -79,6 +79,15 @@
- #define MACH_LASAT_200 1 /* Masquerade PRO/SP200 */
-
- /*
-+ * Valid machtype for Atheros AR71xx based boards
-+ */
-+#define MACH_AR71XX_GENERIC 0
-+#define MACH_AR71XX_WP543 1 /* Compex WP543 */
-+#define MACH_AR71XX_RB_411 2 /* MikroTik RouterBOARD 411 */
-+#define MACH_AR71XX_RB_433 3 /* MikroTik RouterBOARD 433/433AH */
-+#define MACH_AR71XX_RB_450 4 /* MikroTik RouterBOARD 450 */
-+
-+/*
- * Valid machtype for group NEC EMMA2RH
- */
- #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -21,6 +21,24 @@
- config MACH_ALCHEMY
- bool "Alchemy processor based machines"
-
-+config ATHEROS_AR71XX
-+ bool "Atheros AR71xx based boards"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select HW_HAS_PCI
-+ select IRQ_CPU
-+ select GENERIC_GPIO
-+ select HAVE_GPIO_LIB
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_HAS_CPU_MIPS32_R2
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_HAS_EARLY_PRINTK
-+ select MIPS_MACHINE
-+ help
-+ Support for Atheros AR71xx based boards.
-+
- config BASLER_EXCITE
- bool "Basler eXcite smart camera"
- select CEVT_R4K
+++ /dev/null
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -15,6 +15,7 @@
- obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
- obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o
- obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
-+obj-$(CONFIG_ATHEROS_AR71XX) += pci-ar71xx.o
-
- #
- # These are still pretty much in the old state, watch, go blind.
+++ /dev/null
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -260,3 +260,15 @@
- To compile this driver as a module, choose M here: the
- module will be called r8a66597-hcd.
-
-+config USB_OHCI_AR71XX
-+ bool "USB OHCI support for Atheros AR71xx"
-+ depends on ATHEROS_AR71XX && USB_OHCI_HCD
-+ help
-+ Support for Atheros AR71xx built-in OHCI controller
-+
-+config USB_EHCI_AR71XX
-+ bool "USB EHCI support for AR71xx"
-+ depends on ATHEROS_AR71XX && USB_EHCI_HCD
-+ help
-+ Support for Atheros AR71xx built-in EHCI controller
-+
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1043,6 +1043,11 @@
- #define PLATFORM_DRIVER ixp4xx_ehci_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER ehci_hcd_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -538,6 +538,11 @@
- #define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
- #endif
-
-+#if defined(CONFIG_ATHEROS_AR71XX)
-+#define readl_be(addr) __raw_readl(addr)
-+#define writel_be(val, addr) __raw_writel(addr, val)
-+#endif
-+
- static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
- __hc32 __iomem * regs)
- {
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1057,6 +1057,11 @@
- #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER ohci_hcd_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -52,6 +52,13 @@
- comment "SPI Master Controller Drivers"
- depends on SPI_MASTER
-
-+config SPI_AR71XX
-+ tristate "Atheros AR71xx SPI Controller"
-+ depends on SPI_MASTER && ATHEROS_AR71XX
-+ select SPI_BITBANG
-+ help
-+ This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
- tristate "Atmel SPI Controller"
- depends on (ARCH_AT91 || AVR32) && SPI_MASTER
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@
- obj-$(CONFIG_SPI_MASTER) += spi.o
-
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX) += ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
+++ /dev/null
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2067,6 +2067,8 @@
-
- The safe and default value for this is N.
-
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
- depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -2,6 +2,7 @@
- # Makefile for the Linux network (ethercard) device drivers.
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_E1000) += e1000/
- obj-$(CONFIG_E1000E) += e1000e/
- obj-$(CONFIG_IBM_EMAC) += ibm_emac/
+++ /dev/null
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -441,6 +441,10 @@
- { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, },
- { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, },
-
-+ /* PMC -- pm25x "blocks" are 32K, sectors are 4K */
-+ { "pm25lv512", 0, 32 * 1024, 2, SECT_4K },
-+ { "pm25lv010", 0, 32 * 1024, 4, SECT_4K },
-+
- /* Spansion -- single (large) sector size only, at least
- * for the chips listed here (without boot sectors).
- */
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -76,6 +76,11 @@
- ---help---
- Currently supports the Marvell 88E6060 switch.
-
-+config MICREL_PHY
-+ tristate "Drivers for Micrel/Kendin PHYs"
-+ ---help---
-+ Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -15,5 +15,6 @@
- obj-$(CONFIG_ADM6996_PHY) += adm6996.o
- obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
-+obj-$(CONFIG_MICREL_PHY) += micrel.o
- obj-$(CONFIG_FIXED_PHY) += fixed.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -59,31 +59,32 @@
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
- }
- } else {
- offset = directory * master->erasesize;
-- while (master->block_isbad &&
-+ while (master->block_isbad &&
- master->block_isbad(master, offset)) {
- offset += master->erasesize;
- if (offset == master->size)
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
--
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-
-@@ -155,6 +156,11 @@
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
+++ /dev/null
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -330,4 +330,8 @@
- Enabling this option will enable you to use this to control
- external NAND devices.
-
-+config MTD_NAND_RB4XX
-+ tristate "NAND flash driver for RouterBoard 4xx series"
-+ depends on MTD_NAND && ATHEROS_AR71XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -28,6 +28,7 @@
- obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
- obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA) += alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+++ /dev/null
---- /dev/null
-+++ b/include/asm-mips/mips_machine.h
-@@ -0,0 +1,49 @@
-+/*
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __ASM_MIPS_MACHINE_H
-+#define __ASM_MIPS_MACHINE_H
-+
-+#include <linux/init.h>
-+#include <linux/list.h>
-+
-+#include <asm/bootinfo.h>
-+
-+#define MIPS_MACHINE_NAME_LEN 64
-+
-+struct mips_machine {
-+ unsigned long mach_type;
-+ void (*mach_setup)(void);
-+ unsigned char mach_name[MIPS_MACHINE_NAME_LEN];
-+ struct list_head list;
-+};
-+
-+void mips_machine_register(struct mips_machine *) __init;
-+void mips_machine_setup(void) __init;
-+
-+extern unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN];
-+
-+#define MIPS_MACHINE(_type, _name, _setup) \
-+static struct mips_machine machine_##_type __initdata = \
-+{ \
-+ .mach_type = _type, \
-+ .mach_name = _name, \
-+ .mach_setup = _setup, \
-+}; \
-+ \
-+static int __init register_machine_##_type(void) \
-+{ \
-+ mips_machine_register(&machine_##_type); \
-+ return 0; \
-+} \
-+ \
-+pure_initcall(register_machine_##_type)
-+
-+#endif /* __ASM_MIPS_MACHINE_H */
-+
---- /dev/null
-+++ b/arch/mips/kernel/mips_machine.c
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <asm/mips_machine.h>
-+#include <asm/bootinfo.h>
-+
-+static struct list_head mips_machines __initdata =
-+ LIST_HEAD_INIT(mips_machines);
-+
-+unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN] = "Unknown";
-+
-+static struct mips_machine * __init mips_machine_find(unsigned long machtype)
-+{
-+ struct list_head *this;
-+
-+ list_for_each(this, &mips_machines) {
-+ struct mips_machine *mach;
-+
-+ mach = list_entry(this, struct mips_machine, list);
-+ if (mach->mach_type == machtype)
-+ return mach;
-+ }
-+
-+ return NULL;
-+}
-+
-+void __init mips_machine_register(struct mips_machine *mach)
-+{
-+ list_add_tail(&mach->list, &mips_machines);
-+}
-+
-+void __init mips_machine_setup(void)
-+{
-+ struct mips_machine *mach;
-+
-+ mach = mips_machine_find(mips_machtype);
-+ if (!mach) {
-+ printk(KERN_ALERT "MIPS: no machine registered for "
-+ "machtype %lu\n", mips_machtype);
-+ return;
-+ }
-+
-+ if (mach->mach_name[0])
-+ strncpy(mips_machine_name, mach->mach_name,
-+ MIPS_MACHINE_NAME_LEN);
-+
-+ printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
-+
-+ if (mach->mach_setup)
-+ mach->mach_setup();
-+}
-+
---- a/arch/mips/kernel/Makefile
-+++ b/arch/mips/kernel/Makefile
-@@ -79,6 +79,7 @@
-
- obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
-
- CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -701,6 +701,7 @@
-
- endchoice
-
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/au1000/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/jazz/Kconfig"
-@@ -858,6 +859,9 @@
- config MIPS_DISABLE_OBSOLETE_IDE
- bool
-
-+config MIPS_MACHINE
-+ def_bool n
-+
- config NO_IOPORT
- def_bool n
-
+++ /dev/null
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -42,6 +42,7 @@
- #include <asm/mmu_context.h>
- #include <asm/types.h>
- #include <asm/stacktrace.h>
-+#include <asm/time.h>
-
- extern asmlinkage void handle_int(void);
- extern asmlinkage void handle_tlbm(void);
-@@ -1379,6 +1380,8 @@
- */
- if (cpu_has_mips_r2) {
- cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+ if (get_c0_compare_irq)
-+ cp0_compare_irq = get_c0_compare_irq();
- cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
- if (cp0_perfcount_irq == cp0_compare_irq)
- cp0_perfcount_irq = -1;
---- a/include/asm-mips/time.h
-+++ b/include/asm-mips/time.h
-@@ -53,6 +53,7 @@
- #ifdef CONFIG_CEVT_R4K
- extern int mips_clockevent_init(void);
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- #else
- static inline int mips_clockevent_init(void)
- {
+++ /dev/null
---- a/include/asm-mips/hazards.h
-+++ b/include/asm-mips/hazards.h
-@@ -64,7 +64,7 @@
- _ehb
- )
- ASMMACRO(back_to_back_c0_hazard,
-- _ehb
-+ _ssnop; _ssnop; _ssnop; _ehb
- )
- /*
- * gcc has a tradition of misscompiling the previous construct using the
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -187,7 +187,7 @@
- */
- if (c0_compare_int_pending()) {
- write_c0_compare(read_c0_count());
-- irq_disable_hazard();
-+ back_to_back_c0_hazard();
- if (c0_compare_int_pending())
- return 0;
- }
-@@ -196,7 +196,7 @@
- cnt = read_c0_count();
- cnt += delta;
- write_c0_compare(cnt);
-- irq_disable_hazard();
-+ back_to_back_c0_hazard();
- if ((int)(read_c0_count() - cnt) < 0)
- break;
- /* increase delta if the timer was already expired */
-@@ -205,11 +205,12 @@
- while ((int)(read_c0_count() - cnt) <= 0)
- ; /* Wait for expiry */
-
-+ back_to_back_c0_hazard();
- if (!c0_compare_int_pending())
- return 0;
-
- write_c0_compare(read_c0_count());
-- irq_disable_hazard();
-+ back_to_back_c0_hazard();
- if (c0_compare_int_pending())
- return 0;
-
projects / openwrt / staging / robimarko.git / commitdiff