--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Parser for MikroTik RouterBoot partitions.
+ *
+ * Copyright (C) 2020 Thibaut VARÈNE <hacks+kernel@slashdirt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This parser builds from the "fixed-partitions" one (see ofpart.c), but it can
+ * handle dynamic partitions as found on routerboot devices.
+ *
+ * DTS nodes are defined as follows:
+ * For fixed partitions:
+ * node-name@unit-address {
+ * reg = <prop-encoded-array>;
+ * label = <string>;
+ * read-only;
+ * lock;
+ * };
+ *
+ * reg property is mandatory; other properties are optional.
+ * reg format is <address length>. length can be 0 if the next partition is
+ * another fixed partition or a "well-known" partition as defined below: in that
+ * case the partition will extend up to the next one.
+ *
+ * For dynamic partitions:
+ * node-name {
+ * size = <prop-encoded-array>;
+ * label = <string>;
+ * read-only;
+ * lock;
+ * };
+ *
+ * size property is normally mandatory. It can only be omitted (or set to 0) if:
+ * - the partition is a "well-known" one (as defined below), in which case
+ * the partition size will be automatically adjusted; or
+ * - the next partition is a fixed one or a "well-known" one, in which case
+ * the current partition will extend up to the next one.
+ * Other properties are optional.
+ * size format is <length>.
+ * By default dynamic partitions are appended after the preceding one, except
+ * for "well-known" ones which are automatically located on flash.
+ *
+ * Well-known partitions (matched via label or node-name):
+ * - "hard_config"
+ * - "soft_config"
+ * - "dtb_config"
+ *
+ * Note: this parser will happily register 0-sized partitions if misused.
+ *
+ * This parser requires the DTS to list partitions in ascending order as
+ * expected on the MTD device.
+ *
+ * Since only the "hard_config" and "soft_config" partitions are used in OpenWRT,
+ * a minimal working DTS could define only these two partitions dynamically (in
+ * the right order, usually hard_config then soft_config).
+ *
+ * Note: some mips RB devices encode the hard_config offset and length in two
+ * consecutive u32 located at offset 0x14 (for ramips) or 0x24 (for ath79) on
+ * the SPI NOR flash. Unfortunately this seems inconsistent across machines and
+ * does not apply to e.g. ipq-based ones, so we ignore that information.
+ *
+ * Note: To find well-known partitions, this parser will go through the entire
+ * top mtd partition parsed, _before_ the DTS nodes are processed. This works
+ * well in the current state of affairs, and is a simpler implementation than
+ * searching for known partitions in the "holes" left between fixed-partition,
+ * _after_ processing DTS nodes.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt_env.h>
+#include <linux/string.h>
+
+#define RB_MAGIC_HARD (('H') | ('a' << 8) | ('r' << 16) | ('d' << 24))
+#define RB_MAGIC_SOFT (('S') | ('o' << 8) | ('f' << 16) | ('t' << 24))
+#define RB_BLOCK_SIZE 0x1000
+
+struct routerboot_dynpart {
+ const char * const name;
+ const u32 magic;
+ int (* const size_fixup)(struct mtd_info *, struct routerboot_dynpart *);
+ size_t offset;
+ size_t size;
+ bool found;
+};
+
+static int routerboot_dtbsfixup(struct mtd_info *, struct routerboot_dynpart *);
+
+static struct routerboot_dynpart rb_dynparts[] = {
+ {
+ .name = "hard_config",
+ .magic = RB_MAGIC_HARD, // stored in CPU-endianness on flash
+ .size_fixup = NULL,
+ .offset = 0x0,
+ .size = RB_BLOCK_SIZE,
+ .found = false,
+ }, {
+ .name = "soft_config",
+ .magic = RB_MAGIC_SOFT, // stored in CPU-endianness on flash
+ .size_fixup = NULL,
+ .offset = 0x0,
+ .size = RB_BLOCK_SIZE,
+ .found = false,
+ }, {
+ .name = "dtb_config",
+ .magic = fdt32_to_cpu(OF_DT_HEADER), // stored BE on flash
+ .size_fixup = routerboot_dtbsfixup,
+ .offset = 0x0,
+ .size = 0x0,
+ .found = false,
+ }
+};
+
+static int routerboot_dtbsfixup(struct mtd_info *master, struct routerboot_dynpart *rbdpart)
+{
+ int err;
+ size_t bytes_read, psize;
+ struct {
+ fdt32_t magic;
+ fdt32_t totalsize;
+ fdt32_t off_dt_struct;
+ fdt32_t off_dt_strings;
+ fdt32_t off_mem_rsvmap;
+ fdt32_t version;
+ fdt32_t last_comp_version;
+ fdt32_t boot_cpuid_phys;
+ fdt32_t size_dt_strings;
+ fdt32_t size_dt_struct;
+ } fdt_header;
+
+ err = mtd_read(master, rbdpart->offset, sizeof(fdt_header),
+ &bytes_read, (u8 *)&fdt_header);
+ if (err)
+ return err;
+
+ if (bytes_read != sizeof(fdt_header))
+ return -EIO;
+
+ psize = fdt32_to_cpu(fdt_header.totalsize);
+ if (!psize)
+ return -EINVAL;
+
+ rbdpart->size = psize;
+ return 0;
+}
+
+static void routerboot_find_dynparts(struct mtd_info *master)
+{
+ size_t bytes_read, offset;
+ bool allfound;
+ int err, i;
+ u32 buf;
+
+ /*
+ * Dynamic RouterBoot partitions offsets are aligned to RB_BLOCK_SIZE:
+ * read the whole partition at RB_BLOCK_SIZE intervals to find sigs.
+ * Skip partition content when possible.
+ */
+ offset = 0;
+ while (offset < master->size) {
+ err = mtd_read(master, offset, sizeof(buf), &bytes_read, (u8 *)&buf);
+ if (err) {
+ pr_err("%s: mtd_read error while parsing (offset: 0x%X): %d\n",
+ master->name, offset, err);
+ continue;
+ }
+
+ allfound = true;
+
+ for (i = 0; i < ARRAY_SIZE(rb_dynparts); i++) {
+ if (rb_dynparts[i].found)
+ continue;
+
+ allfound = false;
+
+ if (rb_dynparts[i].magic == buf) {
+ rb_dynparts[i].offset = offset;
+
+ if (rb_dynparts[i].size_fixup) {
+ err = rb_dynparts[i].size_fixup(master, &rb_dynparts[i]);
+ if (err) {
+ pr_err("%s: size fixup error while parsing \"%s\": %d\n",
+ master->name, rb_dynparts[i].name, err);
+ continue;
+ }
+ }
+
+ rb_dynparts[i].found = true;
+
+ /*
+ * move offset to skip the whole partition on
+ * next iteration if size > RB_BLOCK_SIZE.
+ */
+ if (rb_dynparts[i].size > RB_BLOCK_SIZE)
+ offset += ALIGN_DOWN((rb_dynparts[i].size - RB_BLOCK_SIZE), RB_BLOCK_SIZE);
+
+ break;
+ }
+ }
+
+ offset += RB_BLOCK_SIZE;
+
+ if (allfound)
+ break;
+ }
+}
+
+static int routerboot_partitions_parse(struct mtd_info *master,
+ const struct mtd_partition **pparts,
+ struct mtd_part_parser_data *data)
+{
+ struct device_node *rbpart_node, *pp;
+ struct mtd_partition *parts;
+ const char *partname;
+ size_t master_ofs;
+ int np;
+
+ /* Pull of_node from the master device node */
+ rbpart_node = mtd_get_of_node(master);
+ if (!rbpart_node)
+ return 0;
+
+ /* First count the subnodes */
+ np = 0;
+ for_each_child_of_node(rbpart_node, pp)
+ np++;
+
+ if (!np)
+ return 0;
+
+ parts = kcalloc(np, sizeof(*parts), GFP_KERNEL);
+ if (!parts)
+ return -ENOMEM;
+
+ /* Preemptively look for known parts in flash */
+ routerboot_find_dynparts(master);
+
+ np = 0;
+ master_ofs = 0;
+ for_each_child_of_node(rbpart_node, pp) {
+ const __be32 *reg, *sz;
+ size_t offset, size;
+ int i, len, a_cells, s_cells;
+
+ partname = of_get_property(pp, "label", &len);
+ /* Allow deprecated use of "name" instead of "label" */
+ if (!partname)
+ partname = of_get_property(pp, "name", &len);
+ /* Fallback to node name per spec if all else fails: partname is always set */
+ if (!partname)
+ partname = pp->name;
+ parts[np].name = partname;
+
+ reg = of_get_property(pp, "reg", &len);
+ if (reg) {
+ /* Fixed partition */
+ a_cells = of_n_addr_cells(pp);
+ s_cells = of_n_size_cells(pp);
+
+ if ((len / 4) != (a_cells + s_cells)) {
+ pr_debug("%s: routerboot partition %pOF (%pOF) error parsing reg property.\n",
+ master->name, pp, rbpart_node);
+ goto rbpart_fail;
+ }
+
+ offset = of_read_number(reg, a_cells);
+ size = of_read_number(reg + a_cells, s_cells);
+ } else {
+ /* Dynamic partition */
+ /* Default: part starts at current offset, 0 size */
+ offset = master_ofs;
+ size = 0;
+
+ /* Check if well-known partition */
+ for (i = 0; i < ARRAY_SIZE(rb_dynparts); i++) {
+ if (!strcmp(partname, rb_dynparts[i].name) && rb_dynparts[i].found) {
+ offset = rb_dynparts[i].offset;
+ size = rb_dynparts[i].size;
+ break;
+ }
+ }
+
+ /* Standalone 'size' property? Override size */
+ sz = of_get_property(pp, "size", &len);
+ if (sz) {
+ s_cells = of_n_size_cells(pp);
+ if ((len / 4) != s_cells) {
+ pr_debug("%s: routerboot partition %pOF (%pOF) error parsing size property.\n",
+ master->name, pp, rbpart_node);
+ goto rbpart_fail;
+ }
+
+ size = of_read_number(sz, s_cells);
+ }
+ }
+
+ if (np > 0) {
+ /* Minor sanity check for overlaps */
+ if (offset < (parts[np-1].offset + parts[np-1].size)) {
+ pr_err("%s: routerboot partition %pOF (%pOF) \"%s\" overlaps with previous partition \"%s\".\n",
+ master->name, pp, rbpart_node,
+ partname, parts[np-1].name);
+ goto rbpart_fail;
+ }
+
+ /* Fixup end of previous partition if necessary */
+ if (!parts[np-1].size)
+ parts[np-1].size = (offset - parts[np-1].offset);
+ }
+
+ if ((offset + size) > master->size) {
+ pr_err("%s: routerboot partition %pOF (%pOF) \"%s\" extends past end of segment.\n",
+ master->name, pp, rbpart_node, partname);
+ goto rbpart_fail;
+ }
+
+ parts[np].offset = offset;
+ parts[np].size = size;
+ parts[np].of_node = pp;
+
+ if (of_get_property(pp, "read-only", &len))
+ parts[np].mask_flags |= MTD_WRITEABLE;
+
+ if (of_get_property(pp, "lock", &len))
+ parts[np].mask_flags |= MTD_POWERUP_LOCK;
+
+ /* Keep master offset aligned to RB_BLOCK_SIZE */
+ master_ofs = ALIGN(offset + size, RB_BLOCK_SIZE);
+ np++;
+ }
+
+ *pparts = parts;
+ return np;
+
+rbpart_fail:
+ pr_err("%s: error parsing routerboot partition %pOF (%pOF)\n",
+ master->name, pp, rbpart_node);
+ of_node_put(pp);
+ kfree(parts);
+ return -EINVAL;
+}
+
+static const struct of_device_id parse_routerbootpart_match_table[] = {
+ { .compatible = "mikrotik,routerboot-partitions" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, parse_routerbootpart_match_table);
+
+static struct mtd_part_parser routerbootpart_parser = {
+ .parse_fn = routerboot_partitions_parse,
+ .name = "routerbootpart",
+ .of_match_table = parse_routerbootpart_match_table,
+};
+module_mtd_part_parser(routerbootpart_parser);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MTD partitioning for RouterBoot");
+MODULE_AUTHOR("Thibaut VARENE");
projects / openwrt / staging / luka.git / commitdiff