#include <linux/platform_device.h>
#include <linux/semaphore.h>
-#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
-#include <linux/ctype.h>
-#include <linux/debugfs.h>
-#include <linux/slab.h>
-#include <linux/uaccess.h>
-#endif
-
/* Max number of arguments AVS calls take */
#define AVS_MAX_CMD_ARGS 4
/*
void __iomem *base;
void __iomem *avs_intr_base;
struct device *dev;
-#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
- struct dentry *debugfs;
-#endif
struct completion done;
struct semaphore sem;
struct pmap pmap;
};
-#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
-
-enum debugfs_format {
- DEBUGFS_NORMAL,
- DEBUGFS_FLOAT,
- DEBUGFS_REV,
-};
-
-struct debugfs_data {
- struct debugfs_entry *entry;
- struct private_data *priv;
-};
-
-struct debugfs_entry {
- char *name;
- u32 offset;
- fmode_t mode;
- enum debugfs_format format;
-};
-
-#define DEBUGFS_ENTRY(name, mode, format) { \
- #name, AVS_MBOX_##name, mode, format \
-}
-
-/*
- * These are used for debugfs only. Otherwise we use AVS_MBOX_PARAM() directly.
- */
-#define AVS_MBOX_PARAM1 AVS_MBOX_PARAM(0)
-#define AVS_MBOX_PARAM2 AVS_MBOX_PARAM(1)
-#define AVS_MBOX_PARAM3 AVS_MBOX_PARAM(2)
-#define AVS_MBOX_PARAM4 AVS_MBOX_PARAM(3)
-
-/*
- * This table stores the name, access permissions and offset for each hardware
- * register and is used to generate debugfs entries.
- */
-static struct debugfs_entry debugfs_entries[] = {
- DEBUGFS_ENTRY(COMMAND, S_IWUSR, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(STATUS, S_IWUSR, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(VOLTAGE0, 0, DEBUGFS_FLOAT),
- DEBUGFS_ENTRY(TEMP0, 0, DEBUGFS_FLOAT),
- DEBUGFS_ENTRY(PV0, 0, DEBUGFS_FLOAT),
- DEBUGFS_ENTRY(MV0, 0, DEBUGFS_FLOAT),
- DEBUGFS_ENTRY(PARAM1, S_IWUSR, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(PARAM2, S_IWUSR, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(PARAM3, S_IWUSR, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(PARAM4, S_IWUSR, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(REVISION, 0, DEBUGFS_REV),
- DEBUGFS_ENTRY(PSTATE, 0, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(HEARTBEAT, 0, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(MAGIC, S_IWUSR, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(SIGMA_HVT, 0, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(SIGMA_SVT, 0, DEBUGFS_NORMAL),
- DEBUGFS_ENTRY(VOLTAGE1, 0, DEBUGFS_FLOAT),
- DEBUGFS_ENTRY(TEMP1, 0, DEBUGFS_FLOAT),
- DEBUGFS_ENTRY(PV1, 0, DEBUGFS_FLOAT),
- DEBUGFS_ENTRY(MV1, 0, DEBUGFS_FLOAT),
- DEBUGFS_ENTRY(FREQUENCY, 0, DEBUGFS_NORMAL),
-};
-
-static int brcm_avs_target_index(struct cpufreq_policy *, unsigned int);
-
-static char *__strtolower(char *s)
-{
- char *p;
-
- for (p = s; *p; p++)
- *p = tolower(*p);
-
- return s;
-}
-
-#endif /* CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG */
-
static void __iomem *__map_region(const char *name)
{
struct device_node *np;
return table;
}
-#ifdef CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG
-
-#define MANT(x) (unsigned int)(abs((x)) / 1000)
-#define FRAC(x) (unsigned int)(abs((x)) - abs((x)) / 1000 * 1000)
-
-static int brcm_avs_debug_show(struct seq_file *s, void *data)
-{
- struct debugfs_data *dbgfs = s->private;
- void __iomem *base;
- u32 val, offset;
-
- if (!dbgfs) {
- seq_puts(s, "No device pointer\n");
- return 0;
- }
-
- base = dbgfs->priv->base;
- offset = dbgfs->entry->offset;
- val = readl(base + offset);
- switch (dbgfs->entry->format) {
- case DEBUGFS_NORMAL:
- seq_printf(s, "%u\n", val);
- break;
- case DEBUGFS_FLOAT:
- seq_printf(s, "%d.%03d\n", MANT(val), FRAC(val));
- break;
- case DEBUGFS_REV:
- seq_printf(s, "%c.%c.%c.%c\n", (val >> 24 & 0xff),
- (val >> 16 & 0xff), (val >> 8 & 0xff),
- val & 0xff);
- break;
- }
- seq_printf(s, "0x%08x\n", val);
-
- return 0;
-}
-
-#undef MANT
-#undef FRAC
-
-static ssize_t brcm_avs_seq_write(struct file *file, const char __user *buf,
- size_t size, loff_t *ppos)
-{
- struct seq_file *s = file->private_data;
- struct debugfs_data *dbgfs = s->private;
- struct private_data *priv = dbgfs->priv;
- void __iomem *base, *avs_intr_base;
- bool use_issue_command = false;
- unsigned long val, offset;
- char str[128];
- int ret;
- char *str_ptr = str;
-
- if (size >= sizeof(str))
- return -E2BIG;
-
- memset(str, 0, sizeof(str));
- ret = copy_from_user(str, buf, size);
- if (ret)
- return ret;
-
- base = priv->base;
- avs_intr_base = priv->avs_intr_base;
- offset = dbgfs->entry->offset;
- /*
- * Special case writing to "command" entry only: if the string starts
- * with a 'c', we use the driver's __issue_avs_command() function.
- * Otherwise, we perform a raw write. This should allow testing of raw
- * access as well as using the higher level function. (Raw access
- * doesn't clear the firmware return status after issuing the command.)
- */
- if (str_ptr[0] == 'c' && offset == AVS_MBOX_COMMAND) {
- use_issue_command = true;
- str_ptr++;
- }
- if (kstrtoul(str_ptr, 0, &val) != 0)
- return -EINVAL;
-
- /*
- * Setting the P-state is a special case. We need to update the CPU
- * frequency we report.
- */
- if (val == AVS_CMD_SET_PSTATE) {
- struct cpufreq_policy *policy;
- unsigned int pstate;
-
- policy = cpufreq_cpu_get(smp_processor_id());
- /* Read back the P-state we are about to set */
- pstate = readl(base + AVS_MBOX_PARAM(0));
- if (use_issue_command) {
- ret = brcm_avs_target_index(policy, pstate);
- return ret ? ret : size;
- }
- policy->cur = policy->freq_table[pstate].frequency;
- }
-
- if (use_issue_command) {
- ret = __issue_avs_command(priv, val, false, NULL);
- } else {
- /* Locking here is not perfect, but is only for debug. */
- ret = down_interruptible(&priv->sem);
- if (ret)
- return ret;
-
- writel(val, base + offset);
- /* We have to wake up the firmware to process a command. */
- if (offset == AVS_MBOX_COMMAND)
- writel(AVS_CPU_L2_INT_MASK,
- avs_intr_base + AVS_CPU_L2_SET0);
- up(&priv->sem);
- }
-
- return ret ? ret : size;
-}
-
-static struct debugfs_entry *__find_debugfs_entry(const char *name)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(debugfs_entries); i++)
- if (strcasecmp(debugfs_entries[i].name, name) == 0)
- return &debugfs_entries[i];
-
- return NULL;
-}
-
-static int brcm_avs_debug_open(struct inode *inode, struct file *file)
-{
- struct debugfs_data *data;
- fmode_t fmode;
- int ret;
-
- /*
- * seq_open(), which is called by single_open(), clears "write" access.
- * We need write access to some files, so we preserve our access mode
- * and restore it.
- */
- fmode = file->f_mode;
- /*
- * Check access permissions even for root. We don't want to be writing
- * to read-only registers. Access for regular users has already been
- * checked by the VFS layer.
- */
- if ((fmode & FMODE_WRITER) && !(inode->i_mode & S_IWUSR))
- return -EACCES;
-
- data = kmalloc(sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
- /*
- * We use the same file system operations for all our debug files. To
- * produce specific output, we look up the file name upon opening a
- * debugfs entry and map it to a memory offset. This offset is then used
- * in the generic "show" function to read a specific register.
- */
- data->entry = __find_debugfs_entry(file->f_path.dentry->d_iname);
- data->priv = inode->i_private;
-
- ret = single_open(file, brcm_avs_debug_show, data);
- if (ret)
- kfree(data);
- file->f_mode = fmode;
-
- return ret;
-}
-
-static int brcm_avs_debug_release(struct inode *inode, struct file *file)
-{
- struct seq_file *seq_priv = file->private_data;
- struct debugfs_data *data = seq_priv->private;
-
- kfree(data);
- return single_release(inode, file);
-}
-
-static const struct file_operations brcm_avs_debug_ops = {
- .open = brcm_avs_debug_open,
- .read = seq_read,
- .write = brcm_avs_seq_write,
- .llseek = seq_lseek,
- .release = brcm_avs_debug_release,
-};
-
-static void brcm_avs_cpufreq_debug_init(struct platform_device *pdev)
-{
- struct private_data *priv = platform_get_drvdata(pdev);
- struct dentry *dir;
- int i;
-
- if (!priv)
- return;
-
- dir = debugfs_create_dir(BRCM_AVS_CPUFREQ_NAME, NULL);
- if (IS_ERR_OR_NULL(dir))
- return;
- priv->debugfs = dir;
-
- for (i = 0; i < ARRAY_SIZE(debugfs_entries); i++) {
- /*
- * The DEBUGFS_ENTRY macro generates uppercase strings. We
- * convert them to lowercase before creating the debugfs
- * entries.
- */
- char *entry = __strtolower(debugfs_entries[i].name);
- fmode_t mode = debugfs_entries[i].mode;
-
- if (!debugfs_create_file(entry, S_IFREG | S_IRUGO | mode,
- dir, priv, &brcm_avs_debug_ops)) {
- priv->debugfs = NULL;
- debugfs_remove_recursive(dir);
- break;
- }
- }
-}
-
-static void brcm_avs_cpufreq_debug_exit(struct platform_device *pdev)
-{
- struct private_data *priv = platform_get_drvdata(pdev);
-
- if (priv && priv->debugfs) {
- debugfs_remove_recursive(priv->debugfs);
- priv->debugfs = NULL;
- }
-}
-
-#else
-
-static void brcm_avs_cpufreq_debug_init(struct platform_device *pdev) {}
-static void brcm_avs_cpufreq_debug_exit(struct platform_device *pdev) {}
-
-#endif /* CONFIG_ARM_BRCMSTB_AVS_CPUFREQ_DEBUG */
-
/*
* To ensure the right firmware is running we need to
* - check the MAGIC matches what we expect
return ret;
brcm_avs_driver.driver_data = pdev;
- ret = cpufreq_register_driver(&brcm_avs_driver);
- if (!ret)
- brcm_avs_cpufreq_debug_init(pdev);
- return ret;
+ return cpufreq_register_driver(&brcm_avs_driver);
}
static int brcm_avs_cpufreq_remove(struct platform_device *pdev)
if (ret)
return ret;
- brcm_avs_cpufreq_debug_exit(pdev);
-
priv = platform_get_drvdata(pdev);
iounmap(priv->base);
iounmap(priv->avs_intr_base);
projects / openwrt / staging / blogic.git / commitdiff