zte,mf286d)
ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
;;
- zte,mf287plus)
+ zte,mf287plus|\
+ zte,mf287pro)
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
;;
ucidef_add_gpio_switch "sim_card_select" "SIM card select" "423" "0"
;;
zte,mf286d|\
+zte,mf287pro|\
zte,mf289f)
ucidef_add_gpio_switch "power_btn_block" "Power button blocker" "421" "0"
;;
zte,mf18a |\
zte,mf286d |\
zte,mf287plus |\
+ zte,mf287pro |\
zte,mf289f)
CI_UBIPART="rootfs"
local mtdnum="$( find_mtd_index $CI_UBIPART )"
zte,mf18a |\
zte,mf286d |\
zte,mf287plus |\
+ zte,mf287pro |\
zte,mf289f)
CI_UBIPART="rootfs"
nand_do_upgrade "$1"
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
+// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
+// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/soc/qcom,tcsr.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ chosen {
+ /*
+ * bootargs forced by u-boot bootipq command:
+ * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
+ */
+ bootargs-append = " root=/dev/ubiblock0_1";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: led-0 {
+ label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ key_reset: key-reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ };
+
+ key_wps: key-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&blsp1_uart1 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&gmac {
+ status = "okay";
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_mac_0>;
+ mac-address-increment = <2>;
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport2 {
+ status = "okay";
+
+ label = "lan1";
+};
+
+&swport3 {
+ status = "okay";
+
+ label = "lan2";
+};
+
+&swport4 {
+ status = "okay";
+
+ label = "lan3";
+};
+
+&swport5 {
+ status = "okay";
+
+ label = "lan4";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&usb3_ss_phy {
+ status = "okay";
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>;
+ qcom,ath10k-calibration-variant = "zte,mf287plus";
+};
+
+&wifi1 {
+ status = "okay";
+ nvmem-cell-names = "pre-calibration", "mac-address";
+ nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>;
+ mac-address-increment = <1>;
+ qcom,ath10k-calibration-variant = "zte,mf287plus";
+};
// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/soc/qcom,tcsr.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "qcom-ipq4018-mf287.dtsi"
/ {
model = "ZTE MF287Plus";
compatible = "zte,mf287plus";
- aliases {
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
- };
-
- chosen {
- /*
- * bootargs forced by u-boot bootipq command:
- * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
- */
- bootargs-append = " root=/dev/ubiblock0_1";
- };
-
/*
* This node is used to restart modem module to avoid anomalous
* behaviours on initial communication.
compatible = "gpio-restart";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
};
-
- leds {
- compatible = "gpio-leds";
-
- led_status: led-0 {
- label = "blue:power";
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- key-reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- };
-
- key-wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
- };
- };
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- tcsr@194b000 {
- /* select hostmode */
- compatible = "qcom,tcsr";
- reg = <0x194b000 0x100>;
- qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
- status = "okay";
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
- };
};
-&mdio {
- status = "okay";
+&key_reset {
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
};
-&watchdog {
- status = "okay";
+&key_wps {
+ gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
};
-&blsp_dma {
- status = "okay";
-};
-
-&usb2 {
- status = "okay";
-};
-
-&usb3 {
- status = "okay";
+&led_status {
+ gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
};
&blsp1_spi1 {
};
};
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_mac_0>;
- mac-address-increment = <2>;
-};
-
-&switch {
- status = "okay";
-};
-
-&swport2 {
- status = "okay";
-
- label = "lan1";
-};
-
-&swport3 {
- status = "okay";
-
- label = "lan2";
-};
-
-&swport4 {
- status = "okay";
-
- label = "lan3";
-};
-
-&swport5 {
- status = "okay";
-
- label = "lan4";
-};
-
-&qpic_bam {
- status = "okay";
-};
-
&tlmm {
serial_pins: serial_pinmux {
mux {
};
};
};
-
-&usb2_hs_phy {
- status = "okay";
-};
-
-&usb3_ss_phy {
- status = "okay";
-};
-
-&usb3_hs_phy {
- status = "okay";
-};
-
-&wifi0 {
- status = "okay";
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>;
- qcom,ath10k-calibration-variant = "zte,mf287plus";
-};
-
-&wifi1 {
- status = "okay";
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>;
- mac-address-increment = <1>;
- qcom,ath10k-calibration-variant = "zte,mf287plus";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
+// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
+// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
+
+#include "qcom-ipq4018-mf287.dtsi"
+
+/ {
+ model = "ZTE MF287Pro";
+ compatible = "zte,mf287pro";
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ modem {
+ gpio-export,name = "modem-reset";
+ gpio-export,output = <0>;
+ gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ regulator-usb-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&tlmm 25 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&key_reset {
+ gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+};
+
+&key_wps {
+ gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
+};
+
+&led_status {
+ gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+};
+
+&mdio {
+ status = "okay";
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <2000>;
+};
+
+&blsp1_spi1 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>,
+ <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "0:SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "0:MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "0:QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "0:CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+
+ partition@d0000 {
+ label = "0:DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+
+ partition@e0000 {
+ label = "0:APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+
+ partition@f0000 {
+ label = "0:APPSBL";
+ reg = <0xf0000 0xc0000>;
+ read-only;
+ };
+
+ partition@1b0000 {
+ label = "0:reserved1";
+ reg = <0x1b0000 0x50000>;
+ read-only;
+ };
+ };
+ };
+
+ spi-nand@1 { /* flash@1 ? */
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <24000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "fota-flag";
+ reg = <0x0 0xa0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "ART";
+ reg = <0xa0000 0x80000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ precal_art_1000: precal@1000 {
+ reg = <0x1000 0x2f20>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@120000 {
+ label = "mac";
+ reg = <0x120000 0x80000>;
+ read-only;
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_mac_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+ };
+
+ partition@1a0000 {
+ label = "reserved2";
+ reg = <0x1a0000 0xc0000>;
+ };
+
+ partition@260000 {
+ label = "cfg-param";
+ reg = <0x260000 0x400000>;
+ read-only;
+ };
+
+ partition@660000 {
+ label = "log";
+ reg = <0x660000 0x400000>;
+ };
+
+ partition@a60000 {
+ label = "oops";
+ reg = <0xa60000 0xa0000>;
+ };
+
+ partition@b00000 {
+ label = "reserved3";
+ reg = <0xb00000 0x500000>;
+ };
+
+ partition@1000000 {
+ label = "web";
+ reg = <0x1000000 0x800000>;
+ };
+
+ partition@1800000 {
+ label = "rootfs";
+ reg = <0x1800000 0x1d00000>;
+ };
+
+ partition@3500000 {
+ label = "data";
+ reg = <0x3500000 0x1900000>;
+ };
+
+ partition@4e00000 {
+ label = "fota";
+ reg = <0x4e00000 0x3200000>;
+ };
+ };
+ };
+};
+
+&tlmm {
+ i2c_0_pins: i2c_0_pinmux {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "blsp_i2c0";
+ bias-disable;
+ };
+ };
+
+ mdio_pins: mdio_pinmux {
+ mux_1 {
+ pins = "gpio6";
+ function = "mdio";
+ bias-pull-up;
+ };
+
+ mux_2 {
+ pins = "gpio7";
+ function = "mdc";
+ bias-pull-up;
+ };
+ };
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio12", "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio12", "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
endef
TARGET_DEVICES += zte_mf286d
-define Device/zte_mf287plus
+define Device/zte_mf287_common
$(call Device/zte_mf28x_common)
- DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
- DEVICE_MODEL := MF287Plus
- DEVICE_ALT0_VENDOR := ZTE
- DEVICE_ALT0_MODEL := MF287
DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
SOC := qcom-ipq4018
# The recovery image is used to return back to stock (an initramfs-based image
IMAGE/factory.bin := append-ubi
IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/openwrt-$$(BOARD)$$(if $$(SUBTARGET),-$$(SUBTARGET))-$$(DEVICE_NAME)-initramfs-zImage.itb rootfs=$$$$@ | append-metadata
endef
+
+define Device/zte_mf287plus
+ $(call Device/zte_mf287_common)
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ DEVICE_MODEL := MF287Plus
+ DEVICE_ALT0_VENDOR := ZTE
+ DEVICE_ALT0_MODEL := MF287
+endef
TARGET_DEVICES += zte_mf287plus
+define Device/zte_mf287pro
+ $(call Device/zte_mf287_common)
+ DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+ DEVICE_MODEL := MF287Pro
+endef
+TARGET_DEVICES += zte_mf287pro
+
define Device/zte_mf289f
$(call Device/zte_mf28x_common)
DEVICE_MODEL := MF289F
projects / openwrt / staging / xback.git / commitdiff