[media] cx88: return proper errors during fw load

Don't return -1, return a proper error.

Replace dprintk(0, ...) by pr_err since firmware load errors should just be
reported as an error.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

diff --git a/drivers/media/pci/cx88/cx88-blackbird.c b/drivers/media/pci/cx88/cx88-blackbird.c
index 32abba47a9370cf9e71c48eaf4044b8f936fab32..11054cd903af2ace749552874a59e07e2a8a2f9f 100644 (file)
--- a/drivers/media/pci/cx88/cx88-blackbird.c
+++ b/drivers/media/pci/cx88/cx88-blackbird.c
@@ -322,13 +322,13 @@ static int blackbird_mbox_func(void *priv, u32 command, int in, int out, u32 dat
        memory_read(dev->core, dev->mailbox - 4, &value);
        if (value != 0x12345678) {
                dprintk(0, "Firmware and/or mailbox pointer not initialized or corrupted\n");
-               return -1;
+               return -EIO;
        }
 
        memory_read(dev->core, dev->mailbox, &flag);
        if (flag) {
                dprintk(0, "ERROR: Mailbox appears to be in use (%x)\n", flag);
-               return -1;
+               return -EIO;
        }
 
        flag |= 1; /* tell 'em we're working on it */
@@ -354,8 +354,8 @@ static int blackbird_mbox_func(void *priv, u32 command, int in, int out, u32 dat
                if (0 != (flag & 4))
                        break;
                if (time_after(jiffies,timeout)) {
-                       dprintk(0, "ERROR: API Mailbox timeout\n");
-                       return -1;
+                       dprintk(0, "ERROR: API Mailbox timeout %x\n", command);
+                       return -EIO;
                }
                udelay(10);
        }
@@ -416,7 +416,7 @@ static int blackbird_find_mailbox(struct cx8802_dev *dev)
                }
        }
        dprintk(0, "Mailbox signature values not found!\n");
-       return -1;
+       return -EIO;
 }
 
 static int blackbird_load_firmware(struct cx8802_dev *dev)
@@ -445,24 +445,23 @@ static int blackbird_load_firmware(struct cx8802_dev *dev)
 
 
        if (retval != 0) {
-               dprintk(0, "ERROR: Hotplug firmware request failed (%s).\n",
+               pr_err("Hotplug firmware request failed (%s).\n",
                        CX2341X_FIRM_ENC_FILENAME);
-               dprintk(0, "Please fix your hotplug setup, the board will "
-                       "not work without firmware loaded!\n");
-               return -1;
+               pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n");
+               return -EIO;
        }
 
        if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) {
-               dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
+               pr_err("Firmware size mismatch (have %zd, expected %d)\n",
                        firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE);
                release_firmware(firmware);
-               return -1;
+               return -EINVAL;
        }
 
        if (0 != memcmp(firmware->data, magic, 8)) {
-               dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n");
+               pr_err("Firmware magic mismatch, wrong file?\n");
                release_firmware(firmware);
-               return -1;
+               return -EINVAL;
        }
 
        /* transfer to the chip */
@@ -480,12 +479,11 @@ static int blackbird_load_firmware(struct cx8802_dev *dev)
                memory_read(dev->core, i, &value);
                checksum -= ~value;
        }
+       release_firmware(firmware);
        if (checksum) {
-               dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n");
-               release_firmware(firmware);
-               return -1;
+               pr_err("Firmware load might have failed (checksum mismatch).\n");
+               return -EIO;
        }
-       release_firmware(firmware);
        dprintk(0, "Firmware upload successful.\n");
 
        retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST);